MERC US Equity☆

merc-10k_20211231.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 2021

OR

For the transition period from to

Commission File No.: 000-51826

MERCER INTERNATIONAL INC.

(Exact name of Registrant as specified in its charter)

(State or other jurisdiction (IRS Employer Identification No.)

of incorporation or organization)

Vancouver, British Columbia, Canada V6C 1G8

(Address of Principal Executive Office) (Zip Code)

Registrant’s telephone number including area code: (604) 684-1099

Securities registered pursuant to Section 12(b) of the Act:

Title of each class Trading Symbol(s) Name of each exchange on which registered

Common Stock, par value $1.00 per share MERC NASDAQ Global Select Market

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes☒ No ☐

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐ Yes ☒No

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes☒ No ☐

Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files). Yes☒ No ☐

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☒ Accelerated filer ☐

Non-accelerated filer ☐ Smaller reporting company ☐

Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). ☐ Yes ☒ No

The aggregate market value of the Registrant’s voting and non-voting common equity held by non-affiliates of the Registrant as of June 30, 2021, the last business day of the Registrant’s most recently completed second fiscal quarter, based on the closing price of the voting stock on the NASDAQ Global Select Market on such date, was approximately $805.9 million.

As of February 15, 2022, the Registrant had 66,037,552 shares of common stock, $1.00 par value per share, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Registrant’s definitive Proxy Statement to be filed with the Securities and Exchange Commission in connection with its annual meeting of shareholders to be held in 2022 are incorporated by reference into Part III hereof.

TABLE OF CONTENTS

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS 1

INDUSTRY AND MARKET DATA 1

INTERNET AVAILABILITY AND ADDITIONAL INFORMATION 1

CURRENCY 2

PART I 3

ITEM 1. BUSINESS 3

Mercer 3

Corporate Strategy 7

The Pulp Industry 8

Pulp Production 13

Generation and Sales of Green Energy and Chemicals 14

Production Costs 16

Sales, Marketing and Distribution 19

Transportation 20

Capital Expenditures 21

Innovation 22

Environmental 22

Climate Change 23

Wood Products Industry 25

Human Capital 26

Community Involvement 28

Commitment to Sustainability 28

Description of Certain Indebtedness 29

ITEM 1A. RISK FACTORS 31

Risks Related to our Business 31

Risks Related to our Debt 40

Risks Related to Macro-economic Conditions 41

Legal and Regulatory Risks 43

Risks Related to Ownership of our Shares 44

ITEM 1B. UNRESOLVED STAFF COMMENTS 45

ITEM 2. PROPERTIES 45

ITEM 3. LEGAL PROCEEDINGS 47

ITEM 4. MINE SAFETY DISCLOSURES 47

NON-GAAP FINANCIAL MEASURES 50

ITEM 6. [RESERVED] 51

Results of Operations 51

Year Ended December 31, 2021 Compared to Year Ended December 31, 2020 54

Sensitivities 58

Liquidity and Capital Resources 59

Balance Sheet Data 60

Sources and Uses of Funds 60

Credit Facilities and Debt Covenants 62

Foreign Currency 62

Credit Ratings of Senior Notes 63

Critical Accounting Policies 63

New Accounting Standards 66

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK 67

Foreign Currency Exchange Risk 67

Product Price Risk 68

Fiber Price Risk 68

Interest Rate Risk 68

(i)

Credit Risk 69

Risk Management and Derivatives 69

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA 70

ITEM 9A. CONTROLS AND PROCEDURES 70

Evaluation of Disclosure Controls and Procedures 70

Management’s Report on Internal Control Over Financial Reporting 71

Changes in Internal Controls 71

ITEM 9B. OTHER INFORMATION 71

PART III 72

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE 72

Executive Chairman, Chief Executive Officer and Directors 72

Other Executive Officers 74

Code of Business Conduct and Ethics and Anti-Corruption Policy 75

ITEM 11. EXECUTIVE COMPENSATION 75

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES 75

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES 76

(ii)

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This annual report on Form 10-K includes “forward-looking” statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements can be identified by the fact that they do not relate strictly to historical or current facts. They often include words such as “believes”, “expects”, “anticipates”, “estimates”, “intends”, “plans”, “seeks” or words of similar meaning, or future or conditional verbs, such as “will”, “should”, “could”, “may”, “aims”, “intends” or “projects”. A forward-looking statement is neither a prediction nor a guarantee of future events or circumstances, and those future events or circumstances may not occur. You should not place undue reliance on forward-looking statements, which speak only as of the date of this annual report on Form 10-K. These forward-looking statements are all based on currently available operating, financial and competitive information. These forward-looking statements are subject to various risks and uncertainties, many of which are beyond our control, and many of the risks and uncertainties are currently amplified by and may continue to be amplified by the COVID-19 pandemic, including the spread of new variants such as omicron. Our actual future results and trends may differ materially depending on a variety of factors, including, but not limited to, the risks and uncertainties discussed under Item 1. “Business”, Item 1A. “Risk Factors” and Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations”. Given these risks and uncertainties, you should not rely on forward-looking statements as a prediction of actual results. Any or all of the forward-looking statements contained in this annual report on Form 10-K and any other public statement made by us, including by our management, may turn out to be incorrect. We are including this cautionary note to make applicable and take advantage of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 for forward-looking statements. We expressly disclaim any obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

INDUSTRY AND MARKET DATA

In this annual report on Form 10-K, we rely on and refer to information and statistics regarding our market share and the markets in which we compete. We have obtained some of this market share information and industry data from internal surveys, market research, publicly available information and industry publications. Such reports generally state that the information contained therein has been obtained from sources believed to be reliable, but the accuracy or completeness of such information is not guaranteed. Although we believe this information is reliable, we have not independently verified, nor can we guarantee, the accuracy or completeness of that information.

Statements in this annual report on Form 10-K concerning the production capacity of our mills are management estimates based primarily on historically achieved levels of production and assumptions regarding maintenance downtime. Statements concerning electrical generating capacity at our mills are also management estimates based primarily on our expected production (which largely determines the amount of electricity we can generate) and assumptions regarding maintenance downtime, in each case within manufacturers’ specifications of capacity.

INTERNET AVAILABILITY AND ADDITIONAL INFORMATION

In this Annual Report on Form 10-K, we incorporate by reference certain information contained in other documents filed with the U.S. Securities and Exchange Commission (“SEC”) and we refer you to such information. We file annual, quarterly and current reports and other information with the SEC. The SEC maintains a website at www.sec.gov that contains these filings. You also may access, free of charge, our reports filed with the SEC through our website. Reports filed with the SEC will be available through our website as soon as reasonably practicable after they are filed. The information contained on or connected to our website, www.mercerint.com, is not incorporated by reference into this Form 10-K and should in no way be construed as a part of this or any other report that we filed with the SEC.

(1)

CURRENCY

The following table sets out exchange rates, based on the noon buying rates in New York City for cable transfers in foreign currencies as certified for customs purposes by the Federal Reserve Bank of New York, referred to as the “Noon Buying Rate”, for the conversion of dollars to euros and Canadian dollars in effect at the end of the following periods, the average exchange rates during these periods (based on daily Noon Buying Rates) and the range of high and low exchange rates for these periods:

Year Ended December 31,

($/€)

($/C$)

On February 14, 2022, the most recent weekly publication of the daily Noon Buying Rate before the filing of this annual report on Form 10-K reported that the Noon Buying Rate as of February 11, 2022 for the conversion of dollars to euros and Canadian dollars was $1.1404 per euro and $0.7888 per Canadian dollar.

(2)

PART I

ITEM 1. BUSINESS

In this document, please note the following:

• references to “NBHK” mean northern bleached hardwood kraft;

• references to “NBSK” mean northern bleached softwood kraft;

• references to “ADMTs” mean air-dried metric tonnes;

• references to “MW” mean megawatts and “MWh” mean megawatt hours;

• references to “Mfbm” mean thousand board feet;

• references to “MMfbm” mean million board feet; and

Due to rounding, numbers presented throughout this report may not add up precisely to totals we provide and percentages may not precisely reflect the absolute figures.

Mercer

General

We are a global forest products company with two reportable operating segments being pulp and wood products.

We have consolidated annual production capacity of approximately 2.3 million ADMTs of kraft pulp, 550 MMfbm of lumber and approximately 416.5 MW of electrical generation.

Pulp Segment

Our pulp segment consists of the manufacture, sale and distribution of pulp, electricity and other by-products at our pulp mills.

We are one of the world’s largest producers of “market” NBSK pulp, which is pulp that is sold on the open market. Our size provides us increased presence, better industry information in our markets and close customer relationships with many large pulp consumers.

We operate two modern and highly efficient NBSK mills in Eastern Germany and one NBSK mill and a “swing” kraft mill in Western Canada which produces both NBSK and NBHK.

(3)

We are the sole NBSK producer, and the only significant market pulp producer in Germany, which is the largest pulp import market in Europe. We supply the growing pulp demand in China both through our Canadian mills’ ready access to the Port of Vancouver and through our Stendal mill’s existing logistics arrangements.

In addition, as a result of the significant investments made in cogeneration equipment, all of our mills generate and sell a significant amount of surplus “green” energy. We also produce and sell tall oil, a by-product of our production process, which is used as both a chemical additive and as a green energy source.

Of our consolidated annual production capacity of approximately 2.3 million ADMTs of kraft pulp, approximately 2.1 million ADMTs or 91% is NBSK and the balance is NBHK.

Key operating details for each of our pulp mills are as follows:

Our pulp mills are some of the newer and more modern pulp mills in Europe and North America. We believe the relative age, production capacity and electrical generation capacity of our mills provide us with certain manufacturing cost and other advantages over many of our competitors. We believe our competitors’ older mills do not have the equipment or capacity to produce or sell surplus power or chemicals in a meaningful amount. In addition, as a result of the relative age of our mills, they benefit from lower maintenance capital requirements and higher efficiency relative to many of our competitors’ mills.

The following table sets out our pulp production and pulp revenues for the periods indicated:

Year Ended December 31,

We serve pulp customers in Europe, Asia and North America. We primarily work directly with customers to capitalize on our geographic diversity, coordinate sales and enhance customer relationships. We believe our ability to deliver high-quality pulp on a timely basis and our customer service makes us a preferred supplier for many customers.

(4)

Our pulp mills generate and sell surplus electricity, providing us with a stable revenue source unrelated to pulp prices. Our German pulp mills also generate tall oil from black liquor, which is sold to third parties for use in numerous applications, including bio-fuels. Since our energy and chemical production are by-products of our pulp production process, there are minimal incremental costs and our surplus energy and chemical sales are highly profitable. All of our mills generate and sell surplus energy to regional utilities or the regional electrical market. Our Stendal and Friesau mills benefit from special tariffs under Germany’s Renewable Energy Sources Act, or the “Renewable Energy Act” and sell their surplus energy undersuch tariffs until 2024 and 2029, respectively.Our Rosenthal mill sells its surplus power at market rates which fluctuate over time. Our Peace River mill sells surplus energy to its regional electrical market. Our Celgar mill is party to a fixed electricity purchase agreement with the regional public utility provider for the sale of surplus power whichruns until October 2030.

The following table sets out the amount of surplus energy we produced and sold and revenues from the sale of such surplus energy and chemicals in our pulp segment for the periods indicated:

Year Ended December 31,

(MWh) ($) (MWh) ($) (MWh) ($)

(in thousands) (in thousands) (in thousands)

Wood Products Segment

Our wood products segment consists of the manufacture, sale and distribution of lumber, electricity and other wood residuals at our Friesau mill. It is one of Germany's largest sawmills.

Our Friesau mill has an annual production capacity of approximately 550 MMfbm of lumber and 13 MW of electrical generation from a modern biomass fueled cogeneration power plant built in 2009. The Friesau mill is located approximately 16 kilometers west of our Rosenthal mill and has historically been one of the Rosenthal mill’s largest fiber suppliers.

The mill produces lumber for European, U.S. and other lumber export markets.

The European and U.S. lumber markets are very different. In the European market, lumber is generally customized in terms of dimensions and finishing. The U.S. market is driven primarily by demand from new housing starts and home renovation activities and dimensions and finishing are generally standardized.

Additionally, lumber production and sales in Europe are commonly measured in cubic meters, whereas in the U.S. they are measured in thousand board feet or Mfbm.

The following table sets out our lumber production and lumber revenues for the periods indicated:

Year Ended December 31,

(5)

The Friesau mill generates electricity for minimal incremental costs, all of which is sold, providing a stable revenue source unrelated to lumber prices. The Friesau mill’s modern biomass fueled cogeneration power plant sells electricity pursuant to a long-term fixed price green power tariff that runs to 2029.

The following table sets out the amount of surplus energy we produced and sold and revenues from the sale of surplus energy by our Friesau mill for the periods indicated.

Year Ended December 31,

(MWh) ($) (MWh) ($) (MWh) ($)

(in thousands) (in thousands) (in thousands)

Corporate Structure, History and Development of Business

Mercer Inc. is a corporation organized under the laws of the State of Washington whose common stock is quoted and listed for trading on the NASDAQ Global Select Market (MERC).

The following simplified chart sets out our principal operating subsidiaries, their jurisdictions of organization, their principal activities and their annual pulp or lumber production and electrical generation capacity:

We entered into the pulp business in 1994 by acquiring our Rosenthal mill and in 1999 converted it to the production of kraft pulp. In September 2004, we expanded our pulp operations by constructing the Stendal mill at a cost of approximately $1.1 billion. We further expanded our pulp operations by acquiring the Celgar mill in 2005 and the Peace River mill in 2018.

In April 2017, we entered into the wood products segment when we acquired the Friesau mill.

In October 2018, we acquired the Santanol Group, which operates Indian sandalwood plantations and an oil extractives plant in Australia.

In August 2021, we acquired a cross-laminated timber facility referred to as the “CLT Facility” located near Spokane, Washington, for approximately $51.3 million. The facility is a state-of-the-art, near-new facility that produces cross-laminated timber, or “CLT”, for use in construction and home building. It has a capacity of approximately 140,000 cubic meters of CLT. We believe it is one of the largest CLT facilities in North America and that it currently represents approximately 30% of North American manufacturing capacity. CLT is a wood panel product, made from adhering layers of solid-sawn lumber and is used as a more sustainable alternative to steel and concrete in building projects. We are currently ramping up the operations of the CLT Facility. Currently, its results are reflected in our financial results in “Corporate and Other Revenues”.

(6)

Corporate Strategy

Our corporate strategy is to grow in businesses where we have clear competencies while maintaining modern facilities and managing the integrity of our balance sheet and liquidity, with a high standard of environmental, social and governance performance. Key elements of our strategy include:

(7)

The Pulp Industry

General

Pulp is used in the production of paper, tissues and paper-related products. Pulp is generally classified according to fiber type, the process used in its production and the degree to which it is bleached. Kraft pulp, a type of chemical pulp, is produced through a sulphate chemical process in which lignin, the component of wood which binds individual fibers, is dissolved in a chemical reaction. Chemically prepared pulp allows the wood’s fiber to retain its length and flexibility, resulting in stronger paper products. Kraft pulp can be bleached to increase its brightness. Softwood kraft pulp is noted for its strength, brightness and absorption properties and is used to produce a variety of products, including lightweight publication grades of paper, tissues and other paper-related products.

There are two main types of bleached kraft pulp, being softwood kraft made from coniferous trees and hardwood kraft made from deciduous trees. Softwood species generally have long, flexible fibers which add strength to paper while fibers from species of hardwood contain shorter fibers which lend bulk and opacity.

We primarily produce and sell NBSK pulp, which is a bleached kraft pulp manufactured using northern softwood and is considered a premium grade because of its strength. It generally obtains the highest price relative to other kraft pulps. Our Peace River mill produces both NBSK and NBHK pulp.

Most paper users of market kraft pulp use a mix of softwood and hardwood grades to optimize production and product qualities. In 2021, market kraft pulp consumption was approximately 57% hardwood bleached kraft and 39% softwood bleached kraft, with the remainder comprised of unbleached pulp. Over the last several years, production of hardwood pulp, based on fast growing plantation fiber primarily from Asia and South America, has increased much more rapidly than that of softwood grades, because of longer growth cycles. Hardwood kraft generally has a cost advantage over softwood kraft as a result of lower fiber costs, higher wood yields and, for newer hardwood mills, economies of scale. As a result of this growth in supply and lower costs, kraft pulp customers have substituted some of the pulp content in their products to hardwood pulp.

However, the requirement for strength and formation characteristics in finished goods counters customers’ ability to substitute cheaper hardwood pulp for NBSK. Paper and tissue makers focus on larger paper machines with higher speeds and lower basis weights for certain papers which require the strength characteristics of softwood pulp. Additionally, where paper products are lightweight or specialized, like direct mail, magazine paper or premium tissue, or where strength or absorbency are important, softwood kraft forms a significant proportion of the fiber used. As a result, we believe that the ability of kraft pulp users to further substitute hardwood for softwood pulp is limited by such requirements.

(8)

Kraft pulp can be made in different grades, with varying technical specifications, for different end uses. Softwood kraft pulp is an important ingredient for tissue manufacturing and tissue demand tends to increase with living standards in developing countries. Softwood kraft pulp is also valued for its reinforcing role in mechanical printing papers and is sought after by producers of paper for the publishing industry, primarily for magazines and advertising materials.

Markets

We believe that over 145 million ADMTs of chemical pulp are converted annually into tissues, printing and writing papers, carton boards and other specialty grades of paper and paperboard around the world. We also believe that approximately 45% of this pulp is sold on the open market as market pulp, while the remainder is produced for internal purposes by integrated paper and paperboard manufacturers.

The pulp business is highly cyclical in nature and markets are characterized by periods of supply and demand imbalance, which in turn affect prices. Pulp markets are highly competitive and are sensitive to cyclical changes in the global economy, industry capacity and foreign exchange rates, all of which can have a significant influence on selling prices and our operating results. The length and magnitude of industry cycles have varied over time but generally reflect changes in macro-economic conditions and levels of industry capacity. Pulp is a commodity that is generally available from other producers. Because commodity products have few distinguishing qualities from producer to producer, competition is generally based upon price, which is generally determined by supply relative to demand.

Between 2012 and 2021, worldwide demand for chemical market pulp overall for such period grew at an average rate of approximately 2% annually, with worldwide demand for bleached softwood kraft market pulp having grown at an average of approximately 1% per annum.

The following chart illustrates the global demand for chemical market pulp for the periods indicated:

Estimated Global Chemical Market Pulp Demand

(9)

NBSK pulp demand is significantly impacted by global macro-economic trends.

Over the last several years there have been several key macro trends that have had a material effect on global pulp demand. Some of the trends have had a positive effect while others have had a negative effect on pulp demand.

A major positive macro trend has been a marked increase in demand from emerging markets, and in particular China. In China alone, tissue production capacity has increased by approximately 7.7 million ADMTs over the last five years. In China, imports of chemical softwood market pulp grew overall by approximately 6% per annum for the period from 2012 to 2021 and it is a key driver of pulp demand and consumption. We believe the emerging markets now account for approximately 58% of total global demand for bleached softwood kraft market pulp and China itself now accounts for approximately 33% of global bleached softwood kraft market pulp demand compared to approximately 28% in 2012.

Another positive macro trend affecting pulp demand has been the increase in usage and demand for tissue and hygiene products, particularly in China and emerging markets generally. This trend was further accelerated by the COVID-19 pandemic. A further positive trend affecting pulp demand was an increase in the global reliance on online delivery of products which has increased demand for packaging and specialty products.

An important negative in pulp demand has been the material decline in graphic and printing and writing paper demand. We believe a material portion of this decline will not return.

Further, paper demand in mature markets of North America, Europe and Japan has been declining or stagnating, which negatively impacts pulp demand in those markets. Western Europe currently accounts for approximately 22% of global bleached softwood kraft market pulp demand compared to approximately 28% in 2012.

The following chart reflects NBSK pulp deliveries to China for the periods indicated:

12 Month Rolling Bleached Softwood Kraft Pulp Deliveries to China

(10)

The trends and changes in NBSK pulp demand by end use are reflected in the following chart which compares worldwide NBSK pulp demand by end use for the periods indicated:

NBSK Pulp Demand by End Use

We believe 2021 NBSK demand by end use was generally consistent with the trend in the chart above.

In 2021, there was an increase in pulp capacity of 2.8 million ADMTs, primarily of hardwood kraft pulp. Currently, we are aware of 2.9 million ADMTs of announced capacity increases primarily of hardwood kraft pulp in 2022.

NBSK Pulp Pricing

Kraft pulp is a globally traded commodity and prices are highly cyclical. Kraft pulp prices are generally quoted in dollars. Pricing is primarily influenced by the balance between supply and demand, as affected by global macro-economic conditions, changes in consumption and capacity, the level of customer and producer inventories and fluctuations in exchange rates. Generally, we and other producers consider global NBSK pulp supply and demand to be evenly balanced when world inventory levels are at about 32 days’ supply.

As the majority of market NBSK pulp is produced and sold by Canadian and Northern European producers, while the price of NBSK pulp is generally quoted in dollars, pricing is often affected by fluctuations in the currency exchange rates for the dollar versus the euro and the Canadian dollar. As NBSK pulp producers generally incur costs in their local currency, while pulp is quoted in dollars, a dollar strengthening generally benefits producers’ businesses and operating margins. Conversely, a weakening of the dollar versus the local currency of producers generally adversely affects producers’ businesses and operating margins.

As a corollary to changes in exchange rates between the dollar and the euro and Canadian dollar, a stronger dollar generally increases costs to customers of NBSK pulp producers and results in downward pressure on prices. Conversely, a weakening dollar generally supports higher pulp pricing. However, there is invariably a time lag between changes in currency exchange rates and pulp prices. This lag can vary and is not predictable with any certainty.

Although China is now the largest market globally for pulp, Northern Europe has also historically been a significant market. As NBSK pulp is a premium grade of pulp, the European market NBSK list price is at times used by the industry as a benchmark reference price. The third party industry quoted average European list prices for NBSK pulp since 2012 have fluctuated between a low of approximately $760 per ADMT in 2012 and a high of $1,345 per ADMT in 2021.

(11)

The following chart sets out the changes in third party industry quoted list prices for NBSK pulp in Europe, as stated in dollars, Canadian dollars and euros for the periods indicated:

NBSK Pulp Price History (European Delivery)

Our pulp sales realizations in Europe and North America are third party industry quoted list prices, net of customer discounts, rebates and other selling concessions. Our sales to China and Asia generally are closer to a net price with significantly lower or little discounts and rebates. As a result, our net sales realizations in China are generally similar to other markets.

The following table sets out third party industry quoted list prices for NBSK pulp in Europe and North America and net prices for NBSK pulp in China as of the dates indicated:

December 31,

($/ADMT)

(12)

The following chart sets forth changes in FOEX PIX Pulp Index prices for NBSK pulp in Europe and global bleached softwood kraft inventory levels for the periods indicated:

Pulp Price and Global Inventory History

Seasonality

We are exposed to fluctuations in quarterly sales volumes and expenses due to seasonal factors. These factors are common in the kraft pulp industry. We generally have weaker pulp demand in China in the period relating to the lunar new year and in Europe during the summer holiday months. We typically have a seasonal build-up in raw material inventories in the early winter months as our mills build up their fiber supply for the winter when there is reduced availability.

Competition

The pulp market is highly fragmented and competitive with many producers competing globally. Producers ranging from small independent manufacturers to large integrated companies produce pulp worldwide. Pulp is generally a commodity product and our pulp competes with similar products manufactured and distributed by many other producers. While many factors influence our competitive position, particularly in weak economic times, a primary factor is price. Other factors include quality, service, access to reasonably priced fiber and convenience of location. Some of our competitors are larger than we are in certain markets and have substantially greater financial resources. These resources may afford those competitors more purchasing power, increased financial flexibility, more capital resources for expansion and improvement and enable them to compete more effectively.

Our key NBSK pulp competitors are principally located in Northern Europe and Canada and include Metsä Fibre, Södra Cell, Ilim, Paper Excellence, Canfor Pulp, and SCA.

Pulp Production

The following table sets out our pulp production capacity and actual production for the periods indicated:

Annual Production Year Ended December 31,

(ADMTs)

(1) Capacity is the rated capacity of the plants as of December 31, 2021.

(13)

Generation and Sales of Green Energy and Chemicals

General

Our pulp mills are large scale bio-refineries that, in addition to pulp, also produce surplus “carbon neutral” or green energy. As part of the pulp production process, our mills generate green energy using carbon neutral bio-fuels such as black liquor and wood waste. Through the incineration of bio-fuels in the recovery and power boilers, our mills produce sufficient steam to cover all of our steam requirements and allow us to produce surplus electricity which we sell to third-party utilities or into the regional electricity market. As a result, we have benefited from green energy legislation, incentives and commercialization that have developed over the last decades in Europe and Canada. In addition, in recent years we have applied considerable resources to increasing our capacity to produce and sell chemicals, primarily tall oil for use in numerous applications including bio-fuels.

Our Friesau mill also generates and sells green energy produced from its biomass cogeneration power plant.

Our surplus energy and chemical sales provide us with a stable revenue source unrelated to pulp or lumber prices. Since our energy and chemical production are by-products of our production processes, there are minimal incremental costs and our surplus energy and chemical sales are highly profitable. We believe that this revenue source gives our mills a competitive advantage over other older mills which do not have the equipment or capacity to produce and/or sell surplus power and/or chemicals in a meaningful amount.

The following chart sets out our electricity generation and surplus electricity sales for the periods indicated:

Electricity Generation and Exports

(2) Includes results of Peace River from December 10, 2018.

(14)

The following chart sets out our consolidated revenues from electricity and chemical sales for the periods indicated:

Energy and Chemical Revenue

(2) Includes results of Peace River from December 10, 2018.

Germany

Until December 31, 2020, all of our German mills participated in a program established pursuant to the Renewable Energy Act, which provides for stable pricing on green energy. As of January 1, 2021, the prior special tariff in respect of our Rosenthal mill expired and it has since sold its surplus power at market rates which fluctuate over time. The special tariff for our Stendal mill is in effect until December 31, 2024 and for our Friesau mill until 2029.

In 2021, energy sales for our German pulp mills and the Friesau mill were approximately $82.4 million or 616,033 MWh.

In connection with our focus on the growing bio-energy market, we sell tall oil, a by-product of our pulp production process which is used as both a chemical additive and as a green energy source. In 2021, we generated approximately $7.3 million from the sale of tall oil and other chemicals from our pulp segment.

Canada

Our Celgar mill is party to an electricity sales agreement with the provincial energy utility for a ten-year term that expires in October 2030. Pursuant to the agreement, the mill agreed to supply a maximum of approximately 127,000 MWh of surplus electrical energy annually to the utility. We are pursuing “market” sales and other strategic initiatives with respect to the remainder of the mill’s surplus power.

The Peace River mill sells its surplus electricity into the Alberta market.

In 2021, our Canadian mills sold approximately 160,586 MWh of renewable electricity for proceeds of approximately $15.5 million.

(15)

Production Costs

Our major costs of pulp production are fiber, labor, chemicals and energy.

Fiber

General

Fiber, comprised of wood chips and pulp logs, is our most significant operating expense for our pulp segment, representing about 45% of our pulp cash production costs in 2021. Further, fiber, in the form of sawlogs, represents about 75% of lumber cash production costs in 2021.

Given the significance of fiber to our total operating expenses and our limited ability to control its cost compared with our other operating costs, volatility in fiber costs can materially affect our margins and results of operations.

Our mills are situated in regions which generally provide a relatively stable supply of fiber. The fiber consumed by our pulp mills consists of wood chips produced by sawmills as a by-product of the sawmilling process and pulp logs. Wood chips are small pieces of wood used to make pulp and are either wood residuals from the sawmilling process or pulp logs chipped especially for this purpose. Pulp logs consist of lower quality logs not used in the production of lumber. The Friesau mill consumes sawlogs and waste wood, which are cyclical in both price and supply.

Generally, the cost of wood chips, pulp logs and sawlogs is primarily affected by the supply and demand for lumber. Additionally, regional factors including harvesting levels, weather conditions and insect infestations can also have a material effect on the supply, demand and price for fiber.

While fiber costs and supply are subject to cyclical changes, we expect that we will be able to continue to obtain an adequate supply of fiber on reasonably satisfactory terms for our mills due to their locations and our long-term relationships with suppliers. We have not historically experienced any significant fiber supply interruptions for our operations.

During the past few years, certain customers have endeavored to purchase pulp that is produced using fiber that meets certain recognized wood certification requirements from forest certification agencies like the Forest Stewardship Council (FSC), the Programme for the Endorsement of Forest Certification (PEFC), the Sustainable Forestry Initiative (SFI) and the Canadian Standards Association (CSA). If the fiber we purchase does not meet certain wood certifications required by customers, it may make it more difficult to, or prevent us from, selling our pulp to such customers. The chain of custody wood certification process is a voluntary process which allows a company to demonstrate that they use forest resources in accordance with strict principles and standards in the areas of sustainable forest management practices and environmental management. In an effort to procure wood only from sustainably managed sources, we employ an FSC Chain of Custody protocol and PEFC certification, which requires tracking of fiber origins and preparing risk based assessments regarding the region and operator. In the areas where we operate, we are actively engaged in the further development of certification processes. However, there is competition among private certification systems along with efforts by supporters to further these systems by having customers of forest products require products to be certified to their preferred system. Such wood certification standards continue to evolve and are not consistent from jurisdiction to jurisdiction or how they are interpreted and applied. We currently do not expect certification requirements to have a material adverse impact on our fiber procurement and sales. However, if sufficient marketplace demand requires wood raw materials to be sourced from standards that are inconsistent with those in our fiber supply regions, it could increase our operating costs and available harvest levels.

Germany

We believe we are the largest consumer of wood chips and pulp logs in Germany and often provide the best long-term economic outlet for the sale of wood chips in Eastern Germany. We coordinate the wood procurement activities for our German mills to reduce overall personnel and administrative costs, provide greater purchasing power and coordinate buying and trading activities. This coordination and integration of fiber flows also allows us to optimize transportation costs, and the species and fiber mix for our mills. We are also party to a joint wood purchasing arrangement with one of the largest wood consumers in Europe.

(16)

In 2021 our German pulp mills consumed an aggregate of approximately 4.9 million cubic meters of fiber. Approximately 58% was in the form of pulp logs and approximately 42% was in the form of sawmill wood chips.

In 2021, our per unit pulp fiber costs in Germany decreased compared to 2020, primarily as a result of the availability of beetle damaged wood and strong sawmill production.

Our Rosenthal mill sources wood chips from approximately 27 sawmills located primarily in the German states of Bavaria, Baden-Württemberg and Thuringia and primarily within a 300 kilometer radius of the Rosenthal mill. Within this radius, the Rosenthal mill is the largest consumer of wood chips. Given its location and size, the Rosenthal mill is often the best economic outlet for the sale of wood chips in the area. In 2021, approximately 90% of the fiber consumed by the Rosenthal mill was spruce and the remainder was pine. Wood chips for the Rosenthal mill are normally sourced from sawmills under one-year contracts with quarterly adjustments for market pricing. Substantially all of our chip supply is sourced from suppliers with which we have long-standing relationships. Pulp logs are sourced from the state forest agencies in Thuringia, Saxony and Bavaria and from private and municipal forest owners. In addition, the Rosenthal mill buys relevant volumes via imports from the Czech Republic.

The core wood supply region for the Stendal mill includes most of the Northeastern and Western part of Germany, primarily within an approximate 400 kilometer radius of the mill. We also purchase wood chips from Southwestern and Southern Germany as well as the Baltic Sea region. The fiber consumed by the Stendal mill consisted of approximately 63% spruce, 35% pine and 2% other species in 2021. The Stendal mill has sufficient chipping capacity to almost fully operate solely using pulp logs, if required. We source pulp logs from private and municipal forest owners and from state forest agencies. Our Stendal mill has historically also imported fiber from Poland and the Baltic Sea region.

Our Friesau mill is dependent on the consistent supply of sawlog fiber. Wood fiber is the single largest input cost and accounts for about 75% of its cash costs of producing lumber in 2021. Our Friesau mill is located in an area where there is a significant amount of high-quality fiber within economic reach. The wood fiber requirements of the Friesau mill are met primarily through open market purchases and contract purchases from state forestry agencies and private and municipal forest owners.

In Germany, over the last several years, the price and supply of wood chips has been affected from time to time by increasing demand from alternative or renewable energy producers and government initiatives for carbon neutral energy. In 2021, increasing energy prices and a stronger economy increased the demand for wood chips resulting from initiatives by European governments to promote the use of wood as a carbon neutral energy.

Offsetting some of the increases in demand for wood fiber have been initiatives to increase harvest levels in Germany, particularly from small private forest owners whose forests have been harvested at rates much lower than their rate of growth.

Additionally, over the last three years, there has been a material increase in the availability of harvestable wood as a result of beetle infestation of German forests. Generally, beetle-infested wood is harvested more rapidly so as to be useable before deterioration makes the wood unsuitable for its intended purposes. Most of such beetle-infested wood has now been harvested and processed. While such beetle-infested wood can increase fiber supply and lead to lower prices in the short-term, such increased harvest levels can lead to challenges in maintaining a sustainable harvest level over the long-term and can lead to periods of reduced harvest levels in the future.

We believe that Germany has the highest availability of softwood forests in Europe suitable for harvesting and manufacturing.

Canada

In 2021, our Celgar and Peace River mills consumed approximately 4.1 million cubic meters of fiber. Approximately 66% of such fiber was in the form of sawmill wood chips and the remaining 34% came from pulp logs processed through their woodrooms or chipped by a third-party. Our Canadian mills’ woodrooms are able to process about 24% of their fiber needs. The source of fiber at the mill is characterized by a mixture of species (aspen, spruce, pine, hemlock, douglas fir and cedar) and the mill sources fiber from a number of Canadian and U.S. suppliers.

(17)

In 2021, our Canadian pulp mills’ per unit fiber costs modestly increased compared to 2020, due to the negative impact of a weaker dollar on our Canadian dollar denominated fiber costs.

The availability of fiber for our mills is in large part influenced by the strength of the lumber market. Lumber markets are primarily driven by U.S. housing starts, home renovation activities and, to a lesser degree, demand from China.

In 2021, our Canadian mills had access to over 30 different chip suppliers, most of whom are in Canada and, in the case of the Celgar mill, are also in the United States. Chips are purchased in Canada and the United States in accordance with chip purchase agreements. Generally, pricing is reviewed and adjusted periodically to reflect market conditions. The contracts for the Celgar mill are generally for one year with quarterly adjustments or on three-month terms. The chip contracts for Peace River are generally for three to five years with monthly adjustments indexed to the average pulp price.

To secure the volume of pulp logs required by its woodroom and field chippers, the Celgar mill has entered into pulp log supply agreements. Such agreements can range from three-month to one-year terms, with a number of different suppliers, many of whom are also contract chip suppliers for the mill. All of the pulp log agreements can be terminated by either party for any reason, upon seven days’ written notice. The Celgar mill also bids on British Columbia timber sales from time to time.

Peace River holds two 20-year renewable governmental forest management agreements and three deciduous timber allocations in Alberta with an aggregate allowable annual cut of approximately 2.4 million cubic meters of hardwood, of which it currently harvests approximately 44%, and 400,000 cubic meters of softwood, which it sells or trades to sawmills surrounding the Peace River mill in exchange for wood chips. The forest management agreements were last renewed for a 20-year term expiring in 2029. While our Peace River mill can satisfy all of its hardwood fiber requirements from its forest management agreements and timber allocations, in order to optimize its fiber flow, it satisfies a small portion of its needs from third-party owned timberlands. Softwood fiber supply is from residual sawmill chips from local surrounding sawmills.

Labor

Our labor costs have increased over time due to inflation in wages and health care costs.

Energy

Our energy is primarily generated from renewable carbon neutral sources, such as black liquor and wood waste. Our mills produce all of our energy requirements and generate excess energy which we sell to third-party utilities and to regional markets. We utilize fossil fuels, such as natural gas, primarily in our lime kilns and we use a limited amount for start-up and shut-down operations. Additionally, from time to time, mill process disruptions occur and we consume small quantities of purchased electricity and fossil fuels to maintain operations. As a result, all of our mills are subject to fluctuations in the prices for fossil fuels.

Chemicals

Our pulp mills use certain chemicals which are generally available from several suppliers and sourcing is primarily based upon pricing and location. Our chemical costs have increased in recent years.

(18)

Sales, Marketing and Distribution

Our global sales and marketing group is responsible for conducting all sales and marketing of the pulp produced at our mills and currently has approximately 25 employees. This group largely handles all European and North American sales directly. Sales to Asia are made directly or through commission agents overseen by our sales group. The global sales and marketing group handles sales to over 250 customers. We coordinate and integrate the sales and marketing activities of our German mills to realize on a number of synergies between them. These include reduced overall administrative and personnel costs and coordinated selling, marketing and transportation activities. We also coordinate pulp sales across our mills on a global basis, thereby providing our larger customers with seamless service across all major geographies. In marketing our pulp, we seek to establish long-term relationships by providing a competitively priced, high-quality, consistent product and excellent service. In accordance with customary practice, we maintain long-standing relationships with our customers, pursuant to which we periodically reach agreements on specific volumes and prices.

Our lumber sales are handled by our sales teams in Germany and Vancouver. We also sell lumber through commissioned agents in certain markets.

The following table sets out our pulp revenues by geographic area for the periods indicated:

Year Ended December 31,

(in thousands)

(1) Excluding intercompany sales.

The following charts set out the geographic distribution of our pulp revenues as a percentage of our total pulp revenues for the periods indicated:

(19)

The following table sets out the distribution of our pulp sales volumes by end use for the periods indicated:

Year Ended December 31,

(in thousands of ADMTs)

The following table set out our lumber revenues by geographic area for the periods indicated:

Year Ended December 31,

(in thousands)

(1) Excluding intercompany sales.

The following charts set out the geographic distribution of our lumber revenues as a percentage of our total lumber revenues for the periods indicated:

Our pulp and lumber sales are on customary industry terms. As of December 31, 2021, we had no material payment delinquencies. In 2021 and 2020, no customer accounted for 10% or more of our revenues. We do not believe our pulp or lumber sales are dependent upon the activities of any single customer and the loss of any single customer would not have a material adverse effect on us.

Transportation

We transport our pulp and lumber generally by truck, rail and ocean carriers through third-party carriers. We have a small fleet of trucks in Germany that deliver some of our German mills’ pulp.

Our German pulp mills are currently the only market kraft pulp producers in Germany, which is the largest import market for kraft pulp in Europe. We therefore have a competitive transportation cost advantage compared to Canadian and Northern European pulp producers when shipping to customers in Europe. Due to the location of our German mills, we are able to deliver pulp to many of our customers primarily by truck and rail.

(20)

Our Canadian mills’ pulp is transported to customers by truck, rail and ocean carrier to ensure timely delivery. The majority of our Canadian mills’ pulp for overseas markets is initially delivered primarily by rail to the Port of Vancouver for shipment overseas by ocean carrier. Based in Western Canada, our Canadian mills are well positioned to service Asian customers. The majority of our Canadian mills’ pulp for domestic markets is shipped by rail directly to the customer or to third-party warehouses in the United States. We also operate a logistics and reload center near Trail, British Columbia to provide us with additional warehouse space and greater transportation flexibility in terms of access to rail and trucking options.

The Friesau mill’s lumber is transported to customers by truck, rail and ocean carriers through third-party carriers.

In each of 2021 and 2020, outbound transportation costs comprised approximately 12% and 13%, respectively, of our total consolidated costs and expenses.

Capital Expenditures

We have continued to make capital investments designed to increase pulp, green energy and chemical production, reduce costs and improve efficiency and environmental performance at our pulp mills. The improvements made over the years have increased the competitive position of our pulp segment. Since its acquisition, we have also made capital investments to optimize sawmill production at the Friesau mill.

The following table sets out the total capital expenditures by segment (excluding any related governmental grants) for the periods indicated:

Year Ended December 31,

(in thousands)

In our pulp segment, capital investments at our Rosenthal mill in 2021 and 2020 primarily related to wastewater improvement and maintenance projects.

Capital investments at the Stendal mill in 2021 primarily related to capacity expansion projects. In 2020, they primarily related to capacity expansion, land for fiber storage and maintenance projects.

Capital investments at the Celgar mill in 2021 primarily related to upgrades to the woodroom and maintenance projects. In 2020, they primarily related to fiber consumption improvement projects and maintenance projects.

Capital investments at the Peace River mill in 2021 primarily related to the recovery boiler rebuild, which was financed with insurance proceeds of $21.5 million and upgrades to the woodroom. In 2020, they primarily related to large maintenance projects.

In our wood products segment, in 2021, we completed expansion and optimization projects at the Friesau mill to, among other things, increase annual lumber production and improve production grade capabilities and efficiencies.

Qualifying capital investments at industrial facilities in Germany that reduce pollutants in the effluent discharge offset wastewater fees that would otherwise be required to be paid. For more information about our environmental capital expenditures, see “– Environmental”.

In 2022, excluding amounts being financed through government grants and expected insurance proceeds, we currently expect our total capital expenditures to be approximately $175.0 million to $200.0 million.

In 2022, we currently expect our capital expenditures in our pulp segment to be principally comprised of upgrades to the woodrooms at our Canadian mills, production improvement projects at our German pulp mills and maintenance projects.

(21)

In 2022, we currently expect capital expenditures in our wood products segment to befor further upgrades to our Friesau mill’s sorter line and other productionimprovement projects and maintenance projects.

Innovation

We utilize our expertise with wood, its processing and by-products to expand our product mix. As a result, we seek to develop new products based on our expertise in wood processing and working with derivatives of the kraft pulping process. Currently these processes are focused on:

• the production and sale of CLT at our recently-acquired CLT Facility;

We are working on some of these initiatives on our own, with others and in conjunction with industry associations or joint venture partners. We are also researching potential higher use products that may be derived from processing different species of trees and plants.

Environmental

Our operations are subject to a wide range of environmental laws and regulations, dealing primarily with:

• air, water and land;

• solid and hazardous waste management;

• waste disposal;

• remediation and contaminated sites; and

• chemical usage.

Compliance with these laws and regulations generally involves capital expenditures as well as additional operating costs. We cannot easily quantify the future amounts of capital expenditures we might have to make to comply with these laws and regulations or the effects on our operating costs because in some instances compliance standards have not been developed, have not become final or definitive or may be amended in the future. In addition, it is difficult to isolate the environmental component of most manufacturing capital projects.

We devote significant management and financial resources to comply with all applicable environmental laws and regulations. In particular, the operation of our plants is subject to permits, authorizations and approvals and we must comply with prescribed emission limits. Compliance with these requirements is monitored by local authorities and non-compliance may result in administrative orders, fines or closures of the non-compliant mill. Our total capital expenditures on environmental projects at our mills were approximately $8.4 million in 2021 and approximately $2.3 million in 2020. In 2022, capital expenditures for environmental projects are expected to be approximately $10.6 million.

Environmental responsibility is a priority for our operations. To ensure compliance with environmental laws and regulations, we regularly monitor emissions at our mills and periodically perform environmental audits of operational sites and procedures both with our internal personnel and outside consultants. These audits identify opportunities for improvement and allow us to take proactive measures at the mills as considered appropriate.

We believe we have obtained all required environmental permits, authorizations and approvals for our operations. We believe our operations are currently in material compliance with the requirements of all applicable environmental laws and regulations and our respective operating permits.

Under German state environmental rules relating to effluent discharges, industrial users are required to pay wastewater fees based upon the amount of pollutants they discharge in their effluent. These rules also provide that an industrial user who undertakes environmental capital expenditures and lowers certain effluent pollutants to prescribed levels may offset the amount of these expenditures against the wastewater fees that they would otherwise be required to pay. We expect capital investment programs and other environmental initiatives at our German mills

(22)

will continue to offset the wastewater fees that are payable and we believe they will ensure that our operations continue in substantial compliance with prescribed standards.

In Canada, in addition to existing provincial air quality regulations, an air quality management system, referred to as “AQMS”, outlines a comprehensive national approach for improving air quality in Canada. Under the AQMS, all levels of government are to work collaboratively to respond to different air quality challenges across the country. The AQMS includes four elements:

In 2016, Environment Canada released the Pan-Canadian Framework on Clean Growth and Climate Change. The framework put in place a national, sector-based greenhouse gas reduction program applicable to a number of industries. In addition, the various provincial governments, including British Columbia and Alberta, have introduced legislation with the intention of reducing greenhouse gas emissions.

British Columbia has, for example, introduced a carbon tax and low-carbon fuel standards. British Columbia has also implemented performance standards, such as greenhouse gas emissions benchmarks for select industrial facilities and sectors, and new greenhouse gas emissions reporting regulations for certain industrial operations. British Columbia has also established greenhouse gas emission offset projects.

In 2019, the federal government began phasing in a federal carbon tax pricing system in provinces and territories without a provincial carbon tax program. As of January 1, 2022, the federal carbon tax pricing system applies to Saskatchewan, Manitoba and Alberta, as well as the territories of Nunavut and the Yukon.

We believe that these water and air emission measures in Germany and Canada have not had, and in 2022 will not have, a significant effect on our operations. Although these measures could have a material adverse effect on our operations in the future, we expect that we will not be disproportionately affected by these measures as compared with owners of comparable operations. We also expect that these measures will not significantly disrupt our planned operations.

Future regulations or permits may place lower limits on allowable types of emissions, including air, water, waste and hazardous materials, and may increase the financial consequences of maintaining compliance with environmental laws and regulations or conducting remediation. Our ongoing monitoring and policies have enabled us to develop and implement effective measures to maintain emissions in substantial compliance with environmental laws and regulations to date in a cost-effective manner. However, there can be no assurance that this will be the case in the future.

Climate Change

Changing weather patterns and climatic conditions due to natural and man-made causes have added to the unpredictability and frequency of natural disasters, such as hurricanes, wildfires and wind, rain, hail, snow and ice storms. Such changes and resulting conditions can adversely affect our operations, resulting in variations in the cost and availability of raw materials, such as fiber, unplanned downtime, changes in operating rates and disruptions in transportation and logistics. For example, in 2021, significant wildfires and later flooding in Western Canada disrupted and reduced harvesting activities and fiber supply and logistics and transportation.

As there is uncertainty about the severity, extent and speed at which climate change is occurring, we are unable to identify and predict all of the consequences of climate change and the timing of the same on our business and operations.

The effects and perceived effects of climate change and social and governmental responses have created both opportunities and negative consequences for our business.

(23)

The focus on climate change has generated a substantial increase in demand and in legislative requirements for carbon neutral or green energy. Pulp mills consume wood residuals, being wood chips and pulp logs, as the base raw material for their production process. Wood chips are residuals left over from lumber production and pulp logs are generally lower quality logs left over from logging that are unsuitable for the production of lumber. Sawmills consume sawlogs and residuals, like wood chips, are generally sold to other industrial consumers like pulp and pellet producers.

As part of their production process, our pulp mills take wood residuals and process them through a digester where cellulose is separated from the wood to be used in pulp production and the remaining residuals, called black liquor, are used for green energy production. As a result of their use of wood residuals and because our mills generate combined heat and power in a process known as cogeneration, they are efficient producers of energy. Our Friesau mill utilizes residual bark and shavings from consumed logs to produce energy. This energy is carbon neutral and produced from a renewable source. Our relatively modern mills generate a substantial amount of energy that is surplus to their operational requirements.

These factors, along with governmental initiatives in respect of renewable or green energy legislation, have provided business opportunities for us to enhance our generation and sales of green energy to regional utilities.

We are constantly exploring other initiatives to enhance our generation and sales of surplus green energy and chemical by-products. Other potential opportunities that may result from climate change include:

• the expansion of softwood forests and increased growth rates for such forests;

• greater demand for sustainable energy and cellulosic biomass fuels;

Historically, the principal driver behind reducing the effects of climate change and moving to a carbon neutral economy primarily resulted from initiatives from governmental or international bodies, including the United Nations and international treaties amongst various countries. However, over the last few years, there has been a significant push and focus on climate change and carbon reduction by private institutions including, among others, institutional investors, ratings agencies, shareholders, communities, other stakeholders and the public generally. This has resulted in, among other things, a significant amount of capital being provided for "green" or carbon neutral initiatives, on favorable terms, some of which are referred to as "green bonds".

We cannot currently predict which, if any, of these potential opportunities will be realized by us or their economic effect on our business.

While not all of the specific consequences to our business from climate change are predictable, one of the most significant adverse consequences is that the focus on renewable energy has created greater demand and competition for wood residuals or fiber from renewable energy producers like the pellet industry in Germany.

In Europe, the price and supply of wood residuals has been periodically affected by an increasing demand from alternative or renewable energy producers and governmental initiatives for carbon neutral energy. In 2021, increasing energy prices and a stronger economy increased the demand for wood chips resulting from initiatives implemented by European governments to promote the use of wood as a carbon neutral energy. Additionally, the growing interest and focus in British Columbia on renewable green energy has created additional competition for such fiber. Such additional demand for wood residuals may increase the competition and prices for wood residuals used by our mills over time.

In response to climate change risks, there have been governmental initiatives and legislation on the international, national, state and local levels. Such governmental action or legislation can have an important effect on the demand and prices for fiber. As governments pursue green energy initiatives, they risk creating incentives and demand for wood residuals from renewable energy producers that “cannibalizes” or adversely affects traditional users, such as lumber and pulp and paper producers. We are continually engaged in dialogue with governments to educate and try

(24)

to ensure potential initiatives recognize the traditional and continuing role of our mills in the overall usage of forestry resources and the economies of local communities.

Other potential negative consequences from climate change that can affect our business include:

Well-publicized events have been attributed at least in part to climate change, including a beetle infestation that has damaged significant amounts of forest lands and harvestable timber in Western Canada and more recently over the last three years in Germany. Beetle infestation of forest lands has both short-term and long-term consequences for our business. In the short-term, there is often a material increase in harvest levels of infested forests as parties seek to utilize such wood before it deteriorates too much to be useable for its intended purposes. As a result, there can be a material increase in fiber availability and lower fiber prices resulting both from such increased supply and the lower quality of such infested fiber. Over the last three years, our German mills have benefitted from such lower fiber prices. Infestation and increased harvest levels resulting therefrom can create over-harvesting and challenges for maintaining sustainable harvest levels over the long-term and can result in lower harvest levels in future periods.

Changes in climate conditions have also been attributed at least in part to increasingly frequent and severe wildfires in the interior of Western Canada and portions of the western United States and Europe. We cannot currently predict whether such climate-affected conditions will continue, or the frequency or severity of the same in the future.

Wood Products Industry

General

With approximately 3.7 billion cubic meters, Germany has the largest timber reserves in Europe. The principal species are spruce, pine, beech and oak. Many of the German forest areas have been certified according to PEFC or FSC standards. Modern solid wood products include sawn and planed lumber which are used in different areas.

Demand for softwood lumber is cyclical and influenced by transportation costs, exchange rates, government tariffs and the competitiveness of substitute products, as well as factors that affect consumer confidence and drive demand for residential construction, such as interest rates, disposable income, unemployment rates, perceived job security and other indicators of general economic conditions. Demand can vary from region to region within a country and seasonal factors that determine optimal building conditions can also affect demand.

Lumber Products and Markets

Our Friesau mill, which was built in 1992 and has two high-volume Linck sawlines, has the ability to produce both rough and planed products. The sawmill principally manufactures finished sawn lumber milled from spruce and pine, including European metric and specialty lumber, U.S. dimensional lumber and J-grade lumber, in various sizes and grades.

The process for manufacturing lumber results in a significant percentage of each sawlog ending up as by-products or residuals such as wood chips, trim blocks, sawdust shavings and bark. By-products are typically used as fuel for our cogeneration power plant or sold to a wide variety of customers. In addition, we utilize a significant portion of the chips from the Friesau mill at our Rosenthal pulp mill.

(25)

The main markets for our lumber products are in the United States, Europe and the Far East.

Our Friesau mill fosters a diverse customer base in each of its key markets. Customers include national and regional distributors, large construction firms, secondary manufacturers, retail yards and home centers.

Competition

The markets for our lumber products are highly competitive on a global basis and producers compete generally on price, quality and service. Factors influencing our competitive position include, among others, the availability, quality and cost of raw materials, including fiber, energy and labor and the efficiency and productivity of the Friesau mill in relation to its competitors. The Friesau mill competes in international markets subject to currency fluctuations and global business conditions.

Our Friesau mill competes against many producers, a number of whom own and operate more mills than we do and numerous competitors have greater financial resources or lower production costs than us.

Human Capital

We believe the strength of our workforce is one of the significant contributors to our success as a global company. All our employees contribute to our success and help us drive strong financial performance. Attracting, developing and retaining global talent with the right skills to drive our business is central to our purpose, mission and long-term growth strategy.

As of December 31, 2021, we employ approximately 2,415 people, of which approximately 1,515 of whom work in our German operations and approximately 835 of whom work in our Canadian operations. Our pulp segment employs approximately 1,855 people and our wood products segment employs approximately 455 people. The majority of our employees in both segments are bound by collective agreements. The collective agreement with hourly workers at our Celgar mill expired in 2021 and the mill currently continues to operate under such agreement until a new collective agreement is finalized. While we currently expect the mill to enter into a new agreement based primarily upon a pattern agreement settled with a regional competitor, we cannot assure that a new agreement will be entered into without workplace disruptions or on satisfactory terms. We consider the relationships with our employees, and the unions which represent them, to be good. Strong labor management relations are fundamental to our operations. Accordingly, we recognize and work cooperatively with the unions and works councils to ensure we build and maintain superior working conditions, a supportive work environment, training and growth opportunities and fair compensation packages.

We employ a collaborative group of skilled, dedicated, resourceful and innovative individuals who support our core purpose and reflect our values every day. Investment in our people drives our excellence and accordingly, we are committed to attracting, retaining and developing quality personnel. By nature of the industries in which we operate, many of our employees are professionals who require specialized knowledge and skills and include various categories of engineers and many licensed trade persons and equipment operators. Our senior managers and directors have extensive experience in the forest products industry, and we have experienced managers at all of our mills. Our management has a proven track record of implementing new initiatives and capital projects in order to reduce costs throughout our operations as well as identifying and harnessing new revenue opportunities.

We aim to support our employees with a well-paying job, rich career opportunities, and a balanced and secure future accompanied by time away from work. All of our employees are provided competitive benefits packages that provide pension, medical, dental, and vision care benefits. Employees are also able to access specialized assistance such as physiotherapy and counselling services. We provide a deep mix of training to help our people grow and be more effective in their current and future roles.

We conduct confidential engagement surveys of our workforce that are administered and analyzed by an independent third party. Aggregate survey results are reviewed by executive officers and the board of directors. We create action plans at global, operational and managerial levels. By acting on results both at an aggregate enterprise level and an operational level, we believe we have been able to enhance our culture and improve our overall engagement.

(26)

Maintaining a robust pipeline of talent is crucial to our ongoing success and is a key aspect of succession planning efforts across the organization. Our leadership and people teams are responsible for attracting and retaining top talent by facilitating an environment where employees feel supported and encouraged in their professional and personal development. Specifically, we promote employee development by reviewing strategic positions regularly and identifying potential internal candidates to fill those roles, evaluating job skill sets to identify competency gaps and creating developmental plans to facilitate employee professional growth. We invest in our employees through training and development programs, on the job experiences and coaching. We provide technical and leadership programs across the organization that enable colleagues to grow skills and capabilities to become more successful. We also have dedicated talent programs that support and accelerate leadership development and strengthen our succession plans. Additionally, we understand the importance of maintaining competitive compensation, benefits and appropriate training that provides growth, developmental opportunities and multiple career paths for our employees.

Health and Safety

Safety is a core value of our company. The industries in which we operate have their own particular set of risks including hazards from our complex industrial manufacturing facilities such as manufacturing processes, heavy and complex equipment, operating boilers, energy production, and the use and recovery of chemicals. Accordingly, there is no initiative that attracts a higher degree of focus for our management team than our “Road to Zero” program, which is a company-wide initiative designed to create safe and productive work environments with a goal of zero workplace incidents.

We have developed tools to analyze potential and incurred incidents and we have resources to develop prevention initiatives. In particular, we focus on modelling responses to eliminate the risk, where possible, by using the “hierarchy of controls” adopted by many of the world’s leading health and safety organizations. Our priority is the elimination of hazards, followed by safe administrative practices and appropriate personal protective equipment. We identify, monitor, educate, and take a data-driven approach to drive workplace safety improvements. Many of our programs revolve around education, hazard identification, and risk mitigation strategies. These proactive initiatives bring safety to the forefront of our work practices. Our teams of safety professionals are dedicated to finding and utilizing the right tools to prevent all workplace injuries. Our Chief Executive Officer is the Chair of our Senior Safety Leadership Committee, referred to as the “SSLC”, which designs and implements broad policies, strategies, expenditures, and training for our employees. The SSLC has engaged a globally recognized safety consultant specializing in the design and implementation of health and safety management systems. Such advisors have been supporting the initiatives established by the SSLC and providing leadership training, policy implementation, and practical tools to support our employees.

We closely monitor the health and safety issues related to the COVID-19 pandemic. In 2021, we encouraged and supported remote-access initiatives so that key staff can work from home or from non-office locations; restricted business travel, based on guidance from the World Health Organization; provided alternative arrangements for site and staff meetings; provided safe working environments that include disinfection of work stations, increased cleaning by janitorial staff, separated shifts, limited staff gatherings in lunchrooms; and instituted social distancing and self-assessment opportunities, which were overseen by trained staff. Employees experiencing cold- or flu-like symptoms were prohibited from coming into the operations and were advised to seek medical attention in line with provincial and regional COVID-19 guidelines. From an operational standpoint, we aligned the work processes at our operating locations within the guidelines of relevant authorities and remained fully operational. A dedicated leadership team met daily to respond to evolving developments and to adjust our operations accordingly while ensuring the safety and health of our employees, contractors, customers, and partners.

Diversity, Equity and Inclusion

We believe that a culture of diversity and inclusion is critical in making the best decisions for our people and achieving sustainable business success. While gender is only one aspect under diversity, a number of our top management positions were and continue to be held by women. We continue to effect changes to our recruiting and training processes to make our workplaces even more reflective of the diversity that exists in our communities. We believe that making our workplace more equal and inclusive will make us a stronger, more resilient and a more sustainable business over the long-term.

(27)

We have adopted an enterprise wide diversity management program. Its goal is to respond to the particular conditions at each of our operations to develop diversity within our teams. One of the first objectives of the program has been to enhance equal opportunities for women in our business. This is a key goal, not just to improve diversity but also to address demographic changes and potential shortages of skilled workers in the future by inspiring more women to take up technical positions in our industry.

Currently, women comprise 30% of our board of directors, about 23% of our top 100 management positions and 18% of our total workforce. Our goal is to improve our recruitment of women so that they comprise 30% of our new hires by 2030.

In Canada, our operations work closely and partner with regional First Nations groups to foster mutually-beneficial economic activities and beneficial relationships. We are party to a logging joint venture with one First Nations group and are working to expand the scope and size of the business and to include other regional groups. We are also pursuing additional joint business or venture opportunities with First Nations groups, including a joint trucking and transportation business. Additionally, we have programs to provide training and job skills to regional First Nations groups.

In Germany, we have an extensive apprenticeship program and outreach events for prospective employees. We believe that these programs and events, among other things, help us to reach out and attract new employees, including more women employees who perhaps in the past had not considered technical or operating employment opportunities at our mills or the forest products industry generally.

We have partnered with a global management consulting company that works to create “Change that Matters”. Their long-standing commitment to advancing gender parity, diversity, and inclusion in business aligns with our values and goals. We are working together to create a custom strategy to assist us in becoming the employer of choice, both locally and globally, for future employees.

We do not employ nor do we contract with any parties that employ people who are subjected to unsafe conditions. The vast majority of our employees are part of a union or are represented by a works council with whom we have worked to design conditions that are safe from harassment and discrimination. In addition, as a supportive workplace, we do our best to accommodate the distinct circumstances of our employees that may require modified workplaces. We have also adopted a written Code of Business Conduct and Ethics and other corporate policies to support a corporate culture which, among other things, promotes a work environment that prohibits intimidation and harassment and encourages and promotes diversity and inclusion.

Community Involvement

We make donations to community groups and charitable organizations in the communities in which we operate and live. We believe this commitment and engagement with local communities helps us to attract and retain employees and enhances our social licence in such communities.

Commitment to Sustainability

We manage and operate our business, including the natural resources under our care or direction, with a long-term view and focus on sustainability. We believe by doing so we will be able to deliver value to our customers, employees, shareholders, communities and other stakeholders. We strive to maintain the highest environmental, social and governance standards. We believe that by caring for the health and safety of our workers, maintaining the environmental quality of our operations and being part of and actively engaged in the communities in which we operate we enhance the value for all of our various stakeholders and our social licence to operate. We work to build all of these values and goals into our corporate culture or what we refer to as the “Mercer Way”. We believe that focusing on sustainability as a key driver in all of our operations and business will enhance our decision-making, our business and our relationships with our various stakeholders and communities in which we operate. We believe all of the foregoing elements are inter-connected and are vital to our long-term future, success and sustainability.

We focus significant attention on minimizing our environmental impact with the goal of reducing the environmental footprint of our existing operations to make them sustainable over the long-term, to ensure we have a social licence to operate and to offset or reduce the impact of our operations. We endeavor to adapt to emerging trends, support

(28)

new technologies and foster environmental stewardship in the areas in which we operate. Our endeavorsare aligned with the United Nations Sustainable Development Goals and other key environmental standards in the areas of low carbon transition, water stewardship, waste, forestry, air emissions, recycling, sourcing and biodiversity.

As part of our commitment and focus on sustainability, we have, among other things:

Description of Certain Indebtedness

The following summarizes certain material provisions of our senior notes and revolving working capital facilities. The summaries are not complete and are qualified by reference to the applicable documents and the applicable amendments to such documents on file with the SEC, and incorporated by reference herein.

Senior Notes

In January 2021, we issued $875.0 million aggregate principal amount of 5.125% senior notes due February 1, 2029, referred to as the “2029 Senior Notes” to refinance all $250.0 million in aggregate principal amount of our 6.500% Senior Notes due 2024, referred to as the “2024 Senior Notes”, pursuant to a tender offer and a subsequent redemption and to redeem all $550.0 million in aggregate principal amount of our 7.375% senior notes due 2025, referred to as the “2025 Senior Notes”. After giving effect to the foregoing transactions, we now have outstanding the following issues of senior notes, collectively referred to as the “Senior Notes”:

• $875.0 million in aggregate principal amount of 2029 Senior Notes.

(29)

The 2026 Senior Notes mature on January 15, 2026 and interest on the 2026 Senior Notes is payable semi-annually in arrears on each January 15 and July 15. Commencing July 15, 2018, interest is payable to holders of record of the 2026 Senior Notes on the immediately preceding January 1 and July 1 and is computed on the basis of a 360-day year consisting of twelve 30-day months. Commencing January 15, 2021, the 2026 Senior Notes became redeemable at our option at a price equal to 102.750% of the principal amount redeemed and declining ratably on January 15 of each year thereafter to 100.000% on or after January 15, 2023.

The 2029 Senior Notes mature on February 1, 2029 and interest on the 2029 Senior Notes is payable semi-annually in arrears on each February 1 and August 1. Commencing August 1, 2021, interest is payable to holders of record of the 2029 Senior Notes on the immediately preceding January 15 and July 15 and is computed on the basis of a 360-day year consisting of twelve 30-day months. Commencing February 1, 2024, the 2029 Senior Notes will become redeemable at our option at a price equal to 102.563% of the principal amount redeemed and declining ratably on February 1 of each year thereafter to 100.000% on or after February 1, 2026.

The indentures governing the Senior Notes contain covenants limiting, among other things, our ability and the ability of our restricted subsidiaries to: incur additional indebtedness or issue preferred stock; pay dividends or make other distributions to our shareholders; purchase or redeem capital stock or subordinated indebtedness; make investments; create liens; incur restrictions on the ability of our restricted subsidiaries to pay dividends or make other payments to us; sell assets; consolidate or merge with or into other companies or transfer all or substantially all of our assets; and engage in transactions with affiliates. As of December 31, 2021, all of our subsidiaries were restricted subsidiaries.

The Senior Notes are unsecured and are not guaranteed by any of our operating subsidiaries, all of which are located outside the United States. Our obligations under the Senior Notes rank: effectively junior in right of payment to all of our existing and future secured indebtedness, to the extent of the assets securing such indebtedness, and all indebtedness and liabilities of our subsidiaries; equal in right of payment with all of our existing and future unsecured senior indebtedness; and senior in right of payment to any of our future subordinated indebtedness.

Pan-German Revolving Credit Facility

In December 2018, certain of our German subsidiaries entered into a €200.0 million joint revolving credit facility, referred to as the “German Facility”, with a group of bank lenders. The principal terms of the facility include:

• The total availability under the German Facility is €200.0 million.

• The German Facility matures in December 2023.

The German Facility is available to all of the borrowers, subject to maximum borrowing sub-limits for certain of the borrowers.

(30)

As of December 31, 2021, approximately €10.5 million ($11.9 million) of the German Facility was supporting bank guarantees leaving approximately €189.5 million ($214.6 million) available.

Canadian Revolving Credit Facility

In January 2022, our Celgar and Peace River mills and certain other subsidiaries entered into a new C$160.0 million revolving credit facility with a syndicate of three North American banks, referred to as the “Canadian Revolving Facility”. This facility replaced and discharged a prior C$60.0 million revolving credit facility for our Celgar mill and a C$60.0 million revolving credit facility for our Peace River mill. The principal terms of the Canadian Revolving Facility include:

• The facility matures in January 2027.

ITEM 1A. RISK FACTORS

The statements in this “Risk Factors” section describe material risks to our business and should be considered carefully. You should review carefully the risk factors listed below, as well as those factors listed in other documents we file with the SEC. In addition, these statements constitute our cautionary statements under the Private Securities Litigation Reform Act of 1995. Our disclosure and analysis in this annual report on Form 10-K and in our annual report to shareholders contain some forward-looking statements that set forth anticipated results based on management’s current plans and assumptions. If any of the risks and uncertainties described in the cautionary factors described below actually occur or continue to occur, our business, financial condition and results of operations and the trading price of our common stock could be materially and adversely affected. Moreover, the risks below are not the only risks we face and additional risks not currently known to us or that we presently deem immaterial may emerge or become material at any time and may negatively impact our business, reputation, financial condition, results of operations or the trading price of our common stock.

Risks Related to our Business

The ongoing COVID-19 pandemic could materially adversely affect our business, financial position and results of operations.

Since its initial outbreak and spread in late 2019, the COVID-19 pandemic has resulted in significant and widespread global infections and fatalities. During the pandemic, various levels of governments globally have from

(31)

time to time taken emergencyand other measures to attempt to contain the virus, including travel bans and restrictions, quarantines, business closures, shelter in place orders and other shutdowns and restrictions.

The impact of the pandemic and the global response thereto has, among other things, significantly disrupted global economic activity, negatively impacted gross domestic product, disrupted supply chains and caused volatility in financial markets. Various countries have suffered declines in gross domestic product growth, business activity and increases in unemployment.

During the pandemic, there have been several “waves” or periods during which there has been a significant widespread increase in reported infections and the emergence and rapid spread of new variants of the COVID-19 virus. In response to such waves, various countries have from time to time re-imposed various restrictions on social, business, travel and other activities.

Since around the end of 2020, there has been a widespread roll-out of vaccines to aid in the prevention and spread of the COVID-19 virus. The roll-out of vaccines has generally resulted in more reopening of economies and a general discussion of whether to treat the COVID-19 virus as endemic and learning to live with it.

Although reported results for the vaccines are generally encouraging, we cannot predict how successful the vaccines will be over time, including against new and yet unknown variants of the virus. Further, we are currently unable to predict the overall impact of the emergence of new variants on global economic activity.

As demand for our products has principally historically been determined by general global macro-economic activities, demand and prices for our products have historically decreased substantially during economic slowdowns. A significant economic downturn may adversely affect our sales and profitability and may also adversely affect our customers and suppliers. Additionally, significant disruptions and volatility in financial markets could have a negative impact on our ability to access capital in the future.

Our products are an important constituent of many pandemic related high demand goods such as tissue and cleaning products and certain personal protective equipment. However, our mills could experience disruptions, downtime and closures in the future as a result of changes to existing government response measures, outbreaks of the virus among our employees or operations or disruptions to raw material supplies or access to logistics networks.

The magnitude and duration of the disruption and resulting decline in business activity that may result from the ongoing pandemic, new variants and/or resurgences is currently uncertain. The extent to which the pandemic impacts our business, operations and financial results will depend on numerous evolving factors that we may not be able to accurately predict, including:

• the effectiveness of vaccines or treatments over time;

• any closures of our and our customers’ operating facilities.

The effect of the pandemic, including remote working arrangements for employees, has also increased the risk of cyberattacks on, and other material breaches of, our and our third party service providers' information technology systems.

(32)

Our business is highly cyclical in nature.

The pulp and lumber businesses are highly cyclical in nature and markets are characterized by periods of supply and demand imbalance, which in turn can cause material fluctuations in prices. Pulp and lumber markets are sensitive to cyclical changes in the global economy, industry capacity and foreign exchange rates, all of which can have a significant influence on selling prices and our operating results. The length and magnitude of industry cycles have varied over time but generally reflect changes in macro-economic conditions and levels of industry capacity. Pulp and lumber are commodities that are generally available from other producers. Because commodity products have few distinguishing qualities from producer to producer, competition is generally based upon price, which is generally determined by supply relative to demand.

Industry capacity can fluctuate as changing industry conditions can influence producers to idle production capacity or permanently close mills. In addition, to avoid substantial cash costs in idling or closing a mill, some producers will choose to operate at a loss, sometimes even a cash loss, which can prolong weak pricing environments due to oversupply. Oversupply of our products can also result from producers introducing new capacity in response to favorable pricing trends. Certain integrated pulp and paper producers have the ability to discontinue paper production by idling their paper machines and selling their pulp production on the market, if market conditions, prices and trends warrant such actions.

Currently, we are aware of 2.9 million ADMTs of announced capacity increases, primarily of hardwood kraft pulp in 2022. However, we cannot predict whether new capacity will be announced or will come on line in the future. If any new capacity, particularly for NBSK pulp, is not absorbed in the market or offset by curtailments or closures of older, high-cost pulp mills, the increase could put downward pressure on pulp prices and materially adversely affect our results of operations, margin and profitability. Additionally, while NBHK pulp is not a direct competitor to NBSK pulp, if any future increases in pulp supply are not absorbed by demand growth, such supply could put downward pressure on NBSK pulp prices as well.

Demand for each of pulp and lumber has historically been determined primarily by general global macro-economic conditions and has been closely tied to overall business activity. Pulp prices have been and are likely to continue to be volatile and can fluctuate widely over time.

A pulp producer’s actual sales price realizations are third party industry quoted list prices net of customer discounts, rebates and other selling concessions. Our sales price realizations may also be affected by price movements between the order and shipment dates.

Global pulp and lumber markets have historically been characterized by considerable swings in prices which have and will result in variability in our earnings. Prices for pulp and lumber are driven by many factors outside our control. We have little influence over the timing and extent of price changes. Because market conditions beyond our control determine the prices for pulp and lumber, prices may fall below our cash production costs, requiring us to either incur short-term losses on product sales or cease production at one or more of our mills. Therefore, our profitability depends on managing our cost structure, particularly raw materials which represent a significant component of our operating costs and can fluctuate based upon factors beyond our control. If the prices of our products decline, or if prices for our raw materials increase, or both, our results of operations and cash flows could be materially adversely affected.

(33)

Cyclical fluctuations in the price and supply of our raw materials, particularly fiber, could adversely affect our business.

Our main raw material is fiber in the form of wood chips, pulp logs and sawlogs. Fiber represented approximately 45% of our pulp cash production costs and approximately 75% of our lumber cash production costs in 2021. Fiber is a commodity and both prices and supply are cyclical. Fiber pricing is subject to regional market influences and our costs of fiber may increase in a region as a result of local market shifts. The cost of wood chips, pulp logs and sawlogs is primarily affected by the supply and demand for lumber. Demand for these raw materials is generally determined by the volume of pulp and paper products and wood products produced globally and regionally. Governmental regulations related to the environment, forest stewardship and green or renewable energy can also affect the supply of fiber. In Europe, governmental initiatives to increase the supply of renewable energy have led to more renewable energy projects, including in Germany. Demand for wood residuals from such energy producers has generally put upward pressure on prices for wood residuals. Wood chip supply in Germany was generally stable during the last three years due to stable sawmill production and lower demand from pellet producers and board manufacturers; however, there is no assurance that wood chip supply will continue to be stable or that supply will not be reduced or that fiber costs will not increase in the future.

Similarly, strong lumber markets in North America and particularly in the United States resulting from a recovery in U.S. housing starts and a robust home renovations market over the last two years have resulted in increased sawmilling activity. This increased the supply of wood chips which are generally a lower cost than pulp logs. However, the lumber industry is highly cyclical and a slowdown in sawmilling activities would reduce the availability of both wood chips and pulp logs and put upward pressure on fiber costs. There is no assurance that sawmill activity will be stable or not decline or that fiber prices will not increase in the future.

The 2006 Softwood Lumber Agreement, which governed softwood lumber exports from Canada to the United States, expired in 2015, and a one-year post-expiration period during which the United States agreed not to impose trade sanctions expired in October 2016. In November 2016, a petition was filed by a coalition of U.S. lumber producers to the U.S. Department of Commerce and the U.S. International Trade Commission requesting an investigation into alleged subsidies provided to Canadian lumber producers. Since then, the U.S. Department of Commerce announced various countervailing and anti-dumping duty rates on Canadian softwood lumber and the United States and Canada have engaged in proceedings under the North American Free Trade Agreement and through the World Trade Organization. In November 2021, the U.S. Department of Commerce reduced the countervailing duty to 6.32% and the anti-dumping rate to 11.59%, for a total cash deposit rate of 17.91% for “all other” Canadian lumber producers. It is uncertain when or if the United States and Canada may settle a new agreement and what terms or restrictions it may contain. Any duties or other restrictions imposed on Canadian softwood lumber exports by the United States could negatively impact Canadian sawmill production in our Canadian mills’ supply area and result in reduced availability and increased costs for wood chips for our Canadian mills. While we believe this may be partially offset by increased wood chip supply from U.S. sawmills and pulp log availability, we cannot currently predict the overall effect on our Canadian mills’ overall fiber costs.

Availability of fiber may be further limited by adverse responses to and prevention of wildfires, weather, insect infestation, disease, ice storms, wind storms, flooding and other natural causes. In addition, the quantity, quality and price of fiber we receive could be affected by man-made causes such as those resulting from industrial disputes, material curtailments or shut-down of operations by suppliers, government orders and legislation (including new taxes or tariffs). Any or a combination of these can affect fiber prices in a region.

The cyclical nature of pricing for fiber represents a potential risk to our profit margins if pulp and lumber producers are unable to pass along price increases to their customers or we cannot offset such costs through higher prices for our surplus energy.

(34)

Other than the renewable forest licenses of our Peace River mill, we do not own any timberlands or have any material long-term governmental timber concessions. We also currently have few long-term fiber contracts at our German operations. Fiber is available from a number of suppliers and we have not historically experienced material supply interruptions or substantial sustained price increases. However, our requirements have increased and may continue to do so as we expand capacity through capital projects or other efficiency measures at our mills. As a result, we may not be able to purchase sufficient quantities of these raw materials to meet our production requirements at prices acceptable to us during times of tight supply. An insufficient supply of fiber or reduction in the quality of fiber we receive would materially adversely affect our business, financial condition, results of operations and cash flows.

In addition to the supply of fiber, we are, to a lesser extent, dependent on the supply of certain chemicals and other inputs used in our production facilities. Any disruption in the supply of these chemicals or other inputs could affect our ability to meet customer demand in a timely manner and could harm our reputation. Any material increase in the cost of these chemicals or other inputs could have a material adverse effect on our business, results of operations, financial condition and cash flows.

We face intense competition in the forest products industry.

We compete with numerous forest products companies, some of which have greater financial resources. The trend toward consolidation in the forest products industry has led to the formation of sizable global producers that have greater flexibility in pricing and financial resources for marketing, investment, research and development, innovation, and expansion. Additionally, certain of our competitors are fully or more vertically integrated than we are and may have different priorities when operating their respective businesses. Because the markets for our products are highly competitive, actions by competitors can affect our ability to compete and the volatility of prices at which our products are sold.

The forest products industry is also capital intensive, and we require significant investment to remain competitive. Some of our competitors may be lower-cost producers in some of the businesses in which we operate. For example, the sizable low-cost hardwood grade pulp capacity in South America, which continues to grow as a result of ongoing investment and whose costs are thought to be very competitive, and the actions those mills take to gain market share, could continue to adversely affect our competitive position in similar grades. Failure to compete effectively could have a material adverse effect on our business, financial condition or results of operations.

Our business is subject to risks associated with climate change and social and government responses thereto.

Our operations and those of our suppliers are subject to climate change variations which can impact the productivity of forests, the abundance of species, harvest levels and fiber supply. Further, over the last few years, changing weather patterns and climate conditions due to natural and man-made causes have added to the frequency and unpredictability of natural disasters like wildfires, insect infestation of softwood forests, floods, rain, wind, snow and ice storms. One or a combination of these factors could adversely affect our fiber supply which is our largest cash production cost. There are differing scientific studies and opinions relating to the severity, extent and speed at which climate change is or may be occurring around the world. As a result, we are currently unable to identify and predict all of the specific consequences of climate change on our business and operations.

Further, governmental initiatives and social focus in response to climate change also have an impact on operations. Their demand for carbon neutral green energy has created greater demand and competition for the wood residuals and fiber that is consumed by our pulp mills as part of their production processes. This can drive up the cost of fiber for our mills.

If our fiber costs increase and we cannot pass on these costs to our customers or offset them through higher prices for our sales of surplus energy, it will negatively affect our operating margins, results of operations and financial position. If we cannot obtain the fiber required to operate our mills, we may have to curtail and/or shut down production. This could have a material adverse effect on our operations, financial results and financial position.

(35)

Other risks to our business from climate change include:

Any of these natural disasters could also affect woodlands or cause variations in the cost of raw materials, such as fiber or restrict or negatively impact our logistics and transportation of goods and materials. Changes in precipitation could make wildfires more frequent or more severe, and could adversely affect timber harvesting and the supply of fiber to our operations. The effects of global, regional, and local weather conditions, and climate change, including the costs of complying with evolving climate change regulations and transition costs relating to a low carbon economy could also adversely impact our results of operations.

If we are unable to offer products certified to globally recognized forestry management and chain of custody standards or meet customers’ product specifications, it could adversely affect our ability to compete.

We market and sell pulp and lumber, with specific designations to certain globally recognized forest management and chain of custody standards as well as product specifications to meet customers’ requirements. Our ability to conform to new or existing guidelines for certification depends on a number of factors, many of which are beyond our control, such as: changes to the standards or the interpretation or the application of the standards; the collaboration of our suppliers in the timely sharing of product information; the adequacy of government-implemented conservation measures; and in Canada the existence of or potential territorial disputes between First Nations peoples and governments. If we are unable to offer certified products, or to meet commitments to supply certified product or meet the product specifications of our customers, it could adversely affect the marketability of our products and our ability to compete with other producers.

Our operations require substantial capital and we may be unable to maintain adequate capital resources to provide for such capital requirements.

Our business is capital intensive and requires that we regularly incur capital expenditures to maintain our equipment, improve efficiencies and, as a result of changes to environmental regulations that require capital expenditures, bring our operations into compliance with such regulations. In addition, we may approve projects in the future that will require significant capital expenditures. Increased capital expenditures could have a material adverse effect on our cash flow and our ability to satisfy our debt obligations. If our available cash resources and cash generated from operations are not sufficient to fund our operating needs and capital expenditures, we would have to obtain additional funds from borrowings or other available sources or reduce or delay our capital expenditures. Our indebtedness could adversely limit or impair our ability to raise additional capital. We may not be able to obtain additional funds on favorable terms or at all. If we cannot maintain or upgrade our equipment as may be required from time to time, we may become unable to manufacture products that compete effectively. An inability to make required capital expenditures in a timely fashion could have a material adverse effect on our growth, business, financial condition or results of operations.

Trends in non-print media and changes in consumer habits regarding the use of paper have and are expected to continue to adversely affect the demand for market pulp.

Trends in non-print media are expected to continue to adversely affect demand for traditional print media, including for printing, writing and graphic papers. Neither the timing nor the extent of these trends can be predicted with certainty. Our paper, magazine, book and catalog publishing customers could increase their use of, and compete with, non-print media, including multimedia technologies, electronic storage and communication platforms which could further reduce their consumption of papers and in turn their demand for market pulp. The demand for such paper products has weakened significantly over the last several years and has accelerated since the COVID-19

(36)

pandemic as confinement and work from home has altered consumer habits, which could become permanent and further negatively impact the demand for market pulp.

Fluctuations in prices and demand for lumber could adversely affect our business.

The financial performance of the Friesau mill depends on the demand for and selling price of lumber, which is subject to significant fluctuations. The markets for lumber are highly volatile and are affected by economic conditions in Europe, Asia and the United States, the strength of housing markets and the home renovations activity in such regions, the growing importance of the Asian market, changes in industry production capacity, changes in inventory levels and other factors beyond our control. Additionally, interest rates have a significant impact on residential construction and renovation activity, which in turn influence the demand for and price of lumber.

Our wood products segment lumber products are vulnerable to declines in demand due to competing technologies or materials.

Our lumber products may compete with alternative products. For example, plastic, wood/plastic or composite materials may be used by builders as alternatives to the lumber products produced by our wood products segment. Changes in the prices for oil, chemicals and other products can change the competitive position of our wood products segment lumber products relative to available alternatives and could increase substitution of those products for our wood products segment products. If use of these alternative products grows, demand for and pricing of our wood products segment products could be adversely affected.

We have limited control over the operations of the Cariboo mill.

Our 50% ownership interest in the Cariboo mill is through an unincorporated joint venture partnership. The ownership and operation of such mill is subject to an underlying agreement and its day-to-day operations are principally conducted by our joint venture partner. Joint venture partnerships generally involve special risks, including that the business and strategic interests of the joint venture partner and ourselves may not coincide or that the joint venture partner may be unable to meet its economic or other obligations thereunder. We have limited control over the actions of the joint venture partner in respect of the Cariboo mill, including any non-performance, default or bankruptcy of such party. Any non-performance by our joint venture partner or other actions taken by the joint venture partner in connection with the day-to-day operation of the Cariboo mill may adversely affect our results of operations and financial condition.

We may experience material disruptions to our production.

A material disruption at one of our manufacturing facilities could prevent us from meeting customer demand, reduce our pulp, lumber and energy sales and/or negatively impact our results of operations. Any of our mills could cease operations unexpectedly due to a number of events, including:

• unscheduled maintenance outages;

• prolonged power failures;

• equipment failure;

• employee errors or failures;

• design error or employee or contractor error;

• chemical spill or release;

• explosion of a boiler;

• prolonged supply disruption of major inputs;

(37)

• labor difficulties;

• other operational problems.

Any such downtime or facility damage could prevent us from meeting customer demand for our products and/or require us to make unplanned capital expenditures. If any of our facilities were to incur significant downtime, our ability to meet our production capacity targets and satisfy customer requirements would be impaired and could have a material adverse effect on our business, financial condition, results of operations and cash flows.

Future acquisitions may result in additional risks and uncertainties in our business.

In order to grow our business, we may seek to acquire additional assets or companies. Our ability to pursue selective and accretive acquisitions will be dependent on management’s ability to identify, acquire and develop suitable acquisition targets in both new and existing markets. In pursuing acquisition and investment opportunities, we face competition from other companies having similar growth strategies, many of which may have substantially greater resources than us. Competition for these acquisitions or investment targets could result in increased acquisition or investment prices, higher risks and a diminished pool of businesses or assets available for acquisition.

Acquisitions also frequently result in recording of goodwill and other intangible assets, which are subject to potential impairments in the future that could have a material adverse effect on our operating results. Furthermore, the costs of integrating acquired businesses (including restructuring charges associated with the acquisitions, as well as other acquisition costs, such as accounting fees, legal fees and investment banking fees) could significantly impact our operating results.

Although we perform diligence on the businesses we purchase, in light of the circumstances of each transaction, an unavoidable level of risk remains regarding the actual condition of these businesses. We may not be able to ascertain the value or understand the potential liabilities of the acquired businesses and their operations until we assume operating control of the assets and operations of these businesses.

Furthermore, future acquisitions could entail a number of risks, including:

• diversion of management’s attention from our ongoing business;

• increased operating costs;

• exposure to substantial unanticipated liabilities;

• difficulty in realizing projected synergies, efficiencies and cost savings;

• problems retaining key employees.

If we are unable to address any of these risks, our results of operations and financial condition could be materially adversely affected.

We are subject to risks related to our employees.

The majority of our employees are unionized and we have collective agreements in place with our employees at all of our mills, other than the Peace River mill which is non-union. Although we have not experienced any material work stoppages in the past, there can be no assurance that we will be able to negotiate acceptable collective agreements or other satisfactory arrangements with our employees upon the expiration of our collective agreements. This could result in a strike or work stoppage by the affected workers. The registration or renewal of the collective agreements or the outcome of our wage negotiations could result in higher wages or benefits paid to union members. Many of the employment positions in our operations require technical or other operating training and/or experience. Changing demographics may make it more difficult for us to recruit skilled employees in the future. Accordingly,

(38)

we could experience a significant disruption of our operations or higher ongoing labor costs, which could have a material adverse effect on our business, financial condition, results of operations and cash flows. In addition, whenever we seek to reduce the workforce at any of our mills, the affected mill’s labor force could seek to hinder or delay such actions, we could incur material severance or other costs and our operations could be disrupted.

We are dependent on key personnel.

Our future success depends, to a large extent, on the efforts and abilities of our executive and senior mill operating officers. Such officers are industry professionals, many of whom have operated through multiple business cycles. The loss of one or more of our officers could make us less competitive, which could materially adversely affect our business, financial condition, results of operations and cash flows. We do not maintain key person life insurance for any of our executive or senior mill operating officers.

In addition, by nature of the industries in which we operate, many of our employees are professionals who require specialized knowledge and skills, including various categories of engineers and licensed trade persons and equipment operators. Any inability to attract, train and retain such employees could adversely affect our business and results of operations.

If our long-lived assets become impaired, we may be required to record non-cash impairment charges that could have a material impact on our results of operations.

We review the carrying value of long-lived assets for impairment when events or changes in circumstances indicate that the carrying amount of the assets may not be recoverable. Should the markets for our products deteriorate or should we decide to invest capital differently or should other cash flow assumptions change, it is possible that we will be required to record non-cash impairment charges in the future that could have a material adverse effect on our results of operations.

Our insurance coverage may not be adequate.

We have obtained insurance coverage that we believe would ordinarily be maintained by an operator of facilities similar to our mills. Our insurance is subject to various limits and exclusions. Damage or destruction to our facilities could result in claims that are excluded by, or exceed the limits of, our insurance coverage. Additionally, the weak global and financial markets have also reduced the availability and extent of credit insurance for our customers. If we cannot obtain adequate credit insurance for our customers, we may be forced to amend or curtail our planned operations which could negatively impact our sales revenues, results of operations and financial position.

We rely on third parties for transportation services.

Our business primarily relies upon third parties for the transportation of pulp and lumber to our customers, as well as for the delivery of our raw materials to our mills. Our pulp, lumber and raw materials are principally transported by truck, barge, rail and sea-going vessels, all of which are highly regulated. Increases in transportation rates can also materially adversely affect our results of operations.

Further, if our transportation providers fail to deliver our pulp or lumber in a timely manner, it could negatively impact our customer relationships and we may be unable to manufacture pulp or lumber in response to customer orders or sell them at full value. Also, if any of our transportation providers were to cease operations, we may be unable to replace them at a reasonable cost. The occurrence of any of the foregoing events could materially adversely affect our results of operations.

Failures or security breaches of our information technology systems could disrupt our operations and negatively impact our business.

We use information technologies to manage our operations and various business functions. We rely on various technologies to process, store and report on our business and to communicate electronically between our facilities, personnel, customers and suppliers as well as for administrative functions and many of such technology systems are dependent on one another for their functionality. We also use information technologies to process financial information and results of operations for internal reporting purposes and to comply with regulatory, legal and tax requirements. We rely on third party providers for some of these information technologies and support. Our ability

(39)

to effectively manage our business and coordinate the production, distribution and sale of our products is highly dependent on our technology systems. Despite our security design and controls and other operational safeguards, and those of our third party providers, our information technology systems may be vulnerable to a variety of interruptions, including during the process of upgrading or replacing hardware, software, databases or components thereof, natural disasters, terrorist attacks, telecommunications failures, computer viruses, cyber-attacks, hackers, unauthorized access attempts and other security issues or may be breached due to employee error, malfeasance or other disruptions. Any such interruption or breach could result in operational disruptions or the misappropriation of sensitive data that could subject us to civil and criminal penalties, litigation or have a negative impact on our reputation. There can be no assurance that such disruptions or misappropriations and the resulting repercussions will not negatively impact our cash flows and materially affect our results of operations or financial condition.

In addition, many of our information technology systems, such as those we use for administrative functions, including human resources, payroll, accounting and internal and external communications, as well as the information technology systems of our third-party business partners and service providers, whether cloud-based or hosted in proprietary servers, contain personal, financial or other information that is entrusted to us by our customers and personnel. Many of our information technology systems also contain proprietary and other confidential information related to our business, such as business plans and research and development initiatives. To the extent we or a third party were to experience a material breach of our or such third party’s information technology systems that results in the unauthorized access, theft, use, destruction or other compromises of our customers’ or personnel’s data or confidential information stored in such systems, including through cyber-attacks or other external or internal methods, it could result in a violation of applicable privacy and other laws, and subject us to litigation and governmental investigations and proceedings, any of which could result in our exposure to material liability.

Risks Related to our Debt

Our level of indebtedness could negatively impact our financial condition, results of operations and liquidity.

As of December 31, 2021, we had approximately $1,261.9 million of indebtedness outstanding. We may also incur additional indebtedness in the future. Our high debt levels may have important consequences for us, including, but not limited to the following:

The indentures that govern our Senior Notes, and our credit facilities contain restrictive covenants which impose operating and other restrictions on us and our subsidiaries. These restrictions will affect, and in many respects will limit or prohibit, our ability to, among other things, incur or guarantee additional indebtedness, pay dividends or make distributions on capital stock or redeem or repurchase capital stock, make investments or acquisitions, create

(40)

liens and enter into mergers, consolidations or transactions with affiliates. The terms of our indebtedness also restrict our ability to sell certain assets, apply the proceeds of such sales and reinvest in our business.

Certain of the agreements governing our indebtedness have covenants that require us to maintain prescribed financial ratios and tests. Failure to comply with such covenants could result in events of default and could have a material adverse effect on our liquidity, results of operations and financial condition.

Our ability to repay or refinance our indebtedness will depend on our future financial and operating performance. Our performance, in turn, will be subject to prevailing economic and competitive conditions, as well as financial, business, legislative, regulatory, industry and other factors, many of which are beyond our control. Our ability to meet our future debt service and other obligations may depend in significant part on the extent to which we can successfully implement our business strategy. We cannot assure you that we will be able to implement our strategy fully or that the anticipated results of our strategy will be realized. Over the next several years, we will require financing to refinance maturing debt obligations (unless extended), and such refinancing may not be available on favorable terms or at all.

Changes in credit ratings issued by nationally recognized statistical rating organizations could adversely affect our cost of financing and have an adverse effect on the market price of our securities.

Credit rating agencies rate our debt securities on factors that include our operating results, actions that we take, their view of the general outlook for our industry and their view of the general outlook for the economy. Actions taken by the rating agencies can include maintaining, upgrading or downgrading the current rating or placing the company on a watch list for possible future downgrading. Downgrading the credit rating of our debt securities or placing us on a watch list for possible future downgrading could limit our access to credit markets, increase our cost of financing and have an adverse effect on the market price of our securities, including our Senior Notes.

We are exposed to interest rate fluctuations.

Interest on borrowings under our revolving credit facilities are at “floating” rates. As a result, increases in interest rates will increase our costs of borrowing and reduce our operating margins.

Risks Related to Macro-economic Conditions

A weakening of the global economy, including capital and credit markets, could adversely affect our business and financial results and have a material adverse effect on our liquidity and capital resources.

As demand for our products has principally historically been determined by general global macro-economic activities, demand and prices for our products have historically decreased substantially during economic slowdowns. A significant economic downturn may affect our sales and profitability. Further, our suppliers and customers may also be adversely affected by an economic downturn. Additionally, restricted credit and capital availability restrains our customers’ ability or willingness to purchase our products, resulting in lower revenues. Depending on their severity and duration, the effects and consequences of a global economic downturn could have a material adverse effect on our liquidity and capital resources, including our ability to raise capital, if needed, and otherwise negatively impact our business and financial results.

In addition, financial uncertainties and other events in our major international markets, including inflation and other market factors, may negatively impact the global economy and consequently, our results of operations.

(41)

We are exposed to currency exchange rate fluctuations.

We have manufacturing operations in Germany and Canada. Most of the operating costs and expenses of our German mills are incurred in euros and those of our Canadian mills in Canadian dollars. However, the majority of our sales are in products quoted in dollars. Our results of operations and financial condition are reported in dollars. As a result, our costs generally benefit from a strengthening dollar but are adversely affected by a decrease in the value of the dollar relative to the euro and to the Canadian dollar. Such declines in the dollar relative to the euro and the Canadian dollar reduce our operating margins and the cash flow available to fund our operations and to service our debt. This could have a material adverse effect on our business, financial condition, results of operations and cash flows.

Further, while a strengthening dollar generally lowers our costs and expenses, it increases the cost of pulp to our customers and generally puts downward pressure on pulp prices and reduces our energy, chemical and European lumber sales revenues as they are sold in euros and Canadian dollars.

Although we report in dollars, we hold certain assets and liabilities, including our mills, in euros and Canadian dollars. We translate foreign denominated assets and liabilities into dollars at the rate of exchange on the balance sheet date. Equity accounts are translated using historical exchange rates. Unrealized gains or losses from these translations are recorded in other comprehensive income (loss) and do not affect our net earnings, operating income or Operating EBITDA.

Certain intercompany dollar advances between Mercer Inc. and its foreign subsidiaries are held in euros and Canadian dollars. Mercer Inc. holds some cash in foreign currencies and certain foreign subsidiaries hold some cash and other balances in dollars. When such advances, cash and other balances are translated into the applicable local currency at the end of each reporting period, the gains or losses thereon are reflected in net earnings.

Political uncertainty, an increase in trade protectionism or geo-political conflict could have a material adverse effect on global macro-economic activities and trade and adversely affect our business, results of operations and financial condition.

The rise of economic nationalist sentiments, trade protectionism and geo-political security has led to increasing political uncertainty and unpredictability throughout the world. Additionally, there can be no assurance that additional or new trade tensions and tariffs will not arise between various trade partners. These potential developments, market perceptions concerning these and related issues and the attendant regulatory uncertainty regarding, for example, the posture of governments with respect to international trade or national security issues, could have a material adverse effect on global trade and economic growth which, in turn, can adversely affect our business, results of operation and financial condition.

Increased trade protectionism could materially adversely affect our business. If the current global economy or outlook is undermined by downside risks and there is a prolonged economic downturn, governments may resort to new or enhanced trade barriers to protect their domestic industries against imports, thereby depressing demand. Changes in the trade policies of the U.S. and other countries, such as the announcement of unilateral tariffs on imported products, have already triggered retaliatory actions from affected countries, resulting in “trade wars” that could have a material adverse effect on global trade and economic growth.

International security issues and adverse developments in respect thereof such as the current political tension between Russia, Ukraine and potentially western security alliances could materially adversely affect global trade and economic activity.

Protectionist developments or adverse international political tensions or developments, or the perception they may occur, may have a material adverse effect on global economic conditions, and may significantly reduce global trade. Increasing trade protectionism in the markets could increase the risks associated with exporting goods to such markets. These developments could have a material adverse effect on our business, results of operations and financial condition.

We may incur losses as a result of unforeseen or catastrophic events, including the emergence of a new pandemic, terrorist attacks or natural disasters.

The occurrence of unforeseen or catastrophic events, including the emergence of a new pandemic or other widespread health emergency (or concerns over the possibility of such an emergency), terrorist attacks or natural

(42)

disasters, could create economic and financial disruptions and could lead to operational difficulties (including travel limitations) that could impair our ability to manage or operate our business and adversely affect our results of operations.

Legal and Regulatory Risks

We are subject to extensive environmental regulation and we could incur substantial costs as a result of compliance with, violations of or liabilities under applicable environmental laws and regulations.

Our operations are subject to numerous environmental laws and regulations as well as permits, guidelines and policies relating to the protection of the environment. These laws, regulations, permits, guidelines and policies govern, among other things:

• unlawful discharges to land, air, water and sewers;

• waste collection, storage, transportation and disposal;

• hazardous waste;

• the clean-up of unlawful discharges;

• land use planning;

• municipal zoning; and

• employee health and safety.

In addition, as a result of our operations, we may be subject to remediation, clean-up or other administrative orders or amendments to our operating permits, and we may be involved from time to time in administrative and judicial proceedings or inquiries. Future orders, proceedings or inquiries could have a material adverse effect on our business, financial condition and results of operations. Environmental laws and land use laws and regulations are constantly changing. New regulations or the increased enforcement of existing laws could have a material adverse effect on our business and financial condition. In addition, compliance with regulatory requirements is expensive, at times requiring the replacement, enhancement or modification of equipment, facilities or operations. There can be no assurance that we will be able to maintain our profitability by offsetting any increased costs of complying with future regulatory requirements.

We are subject to liability for environmental damage at the facilities that we own or operate, including damage to neighboring landowners, residents or employees, particularly as a result of the contamination of soil, groundwater or surface water and especially drinking water. The costs of such liabilities can be substantial. Our potential liability may include damages resulting from conditions existing before we purchased or operated these facilities. We may also be subject to liability for any offsite environmental contamination caused by pollutants or hazardous substances that we or our predecessors arranged to transport, treat or dispose of at other locations. In addition, we may be held legally responsible for liabilities as a successor owner of businesses that we acquire or have acquired. Except for Stendal, our facilities have been operating for decades and we have not done invasive testing to determine whether or to what extent any such environmental contamination exists. As a result, these businesses may have liabilities for conditions that we discover or that become apparent, including liabilities arising from non-compliance with environmental laws by prior owners. Because of the limited availability of insurance coverage for environmental liability, any substantial liability for environmental damage could materially adversely affect our results of operations and financial condition.

We have incurred, and we expect to continue to incur, significant capital, operating and other expenditures as a result of complying with applicable environmental laws and regulations.

Further, enactment of new environmental laws or regulations, changes in existing laws or regulations or the interpretation of these laws and regulations might require significant capital expenditures. We may be unable to generate sufficient funds or access other sources of capital to fund unforeseen environmental liabilities or expenditures.

(43)

We participate in German statutory energy programs.

In Germany, our Stendal and Friesau mills sell surplus green energy at fixed prices or tariffs pursuant to the Renewable Energy Act. Our Stendal mill’s tariff expires in 2024 and our Friesau mill’s tariff expires in 2029. Our Rosenthal mill’s tariff has expired and since January 1, 2021, it has sold its power at market rates which fluctuate over time.

The availability of tariffs and other incentives for our green energy production activities is dependent, to a large extent, on political and policy developments relating to environmental concerns in the regions in which we operate. We cannot currently predict the scope of any such measures whether they will provide similar economic incentives as under the tariffs, when, if at all, they will be implemented or their potential application and impact on the expiry of their existing tariffs in 2024 and 2029, respectively, our Stendal and Friesau mills.

Our international sales and operations are subject to applicable laws relating to trade, export controls, foreign corrupt practices and competition laws, the violation of which could adversely affect our operations.

As a result of our international sales and operations, we are subject to trade and economic sanctions and other restrictions imposed by the United States, Canada and other governments or organizations, including prohibitions in the United States against foreign competitors’ (including our operating subsidiaries) receipt of certain unlawful foreign governmental benefits. We are also subject to the U.S. Foreign Corrupt Practices Act of 1977, the Canadian Corruption of Foreign Public Officials Act and other anti-bribery laws that generally bar bribes or unreasonable gifts to foreign governments or officials. Changes in trade sanction laws could restrict our business practices, including cessation of business activities in sanctioned countries or with sanctioned entities, and may result in modifications to compliance programs. Violations of these laws or regulations could result in sanctions including fines, loss of authorizations needed to conduct our international business, the imposition of tariffs or duties and other penalties, which could adversely impact our business, operating results and financial condition.

In 2021, the European Commission commenced a cartel investigation into the wood pulp sector in Europe to investigate if there was an infringement of European Union competition law. In October 2021, the Commission conducted inspections of several European pulp producers, including our German operations. The matter is currently in the investigation stage and we are cooperating with the investigation and expect to engage with the European Commission if the investigation continues. We are unable to predict the timing of, and what further actions, if any, the Commission may pursue. If the Commission were to pursue actions against such European pulp producers, including our German operations, and ultimately there was a non-appealable determination of an infringement of European competition law, it could impose significant financial penalties on such producers, including us, that could have a material adverse effect on us and our business.

Risks Related to Ownership of our Shares

The price of our common stock may be volatile.

The market price of our common stock may be influenced by many factors, some of which are beyond our control, including those described above and the following:

• our growth rate and our competitors’ growth rates;

• the financial market and general economic conditions;

• changes in accounting principles; and

• changes in laws and regulations.