vpg-20211231
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
☒ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2021
or
☐TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934
For the transition period from _______ to _______
Commission file number 1-34679
Vishay Precision Group, Inc.
(Exact name of registrant as specified in its charter)
(State or other jurisdiction of (IRS employer identification no.)
incorporation or organization)
3 Great Valley Parkway, Suite 150
Malvern, PA19355
(Address of principal executive offices)
484-321-5300
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Common Stock, $0.10 par value VPG New York Stock Exchange
(Title of class) (Trading Symbol) (Exchange on which registered)
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. YesoNoý
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes oNoý
Note – Checking the box above will not relieve any registrant required to file reports under Section 13 or 15(d) of the Exchange Act from their obligations under those Sections.
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yesý Noo
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). YesýNoo
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definition of “accelerated filer”, “large accelerated filer”, “smaller reporting company”, and "emerging growth company" in Rule 12b-2 of the Act. (Check one):
Large accelerated filer ̈ Accelerated filer ý
Non-accelerated filer ̈ Smaller reporting company ☐
Emerging growth company ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes☐Noý
The aggregate market value of the voting stock held by non-affiliates computed by reference to the price at which the common stock was last sold as of the last business day of the registrant’s most recently completed second fiscal quarter ($34.61 on July 3, 2021), assuming conversion of all of its Class B convertible common stock held by non-affiliates into common stock of the registrant, was $440,366,000. There is no non-voting stock outstanding.
As of March 4, 2022, the registrant had 12,611,905 shares of its common stock and 1,022,887 shares of its Class B convertible common stock outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant’s definitive proxy statement, which will be filed within 120 days of December 31, 2021, are incorporated by reference into Part III of this Annual Report on Form 10-K.
- 1 -
Vishay Precision Group, Inc.
Form 10-K for the year ended December 31, 2021
CONTENTS
PART I
Item 1. Business Description 3
Item 1A. Risk Factors 13
Item 1B. Unresolved Staff Comments 24
Item 2. Properties 24
Item 3. Legal Proceedings 24
Item 4. Mine Safety Disclosures 24
PART II
Item 6. [Reserved] 26
Item 7A. Quantitative and Qualitative Disclosures About Market Risk 43
Item 8. Financial Statements and Supplementary Data 44
Item 9A. Controls and Procedures 45
Item 9B. Other Information 47
Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 47
PART III
Item 10. Directors, Executive Officers, and Corporate Governance 47
Item 11. Executive Compensation 47
Item 14. Principal Accounting Fees and Services 47
PART IV
Item 15. Exhibits, Financial Statement Schedules 48
SIGNATURES 52
Index to Consolidated Financial Statements F-1
Report of Independent Registered Public Accounting Firm F-2
Consolidated Balance Sheets as of December 31, 2021 and 2020 F-5
Notes to Consolidated Financial Statements F-11
- 2 -
PART I
Item 1.BUSINESS DESCRIPTION
General
Vishay Precision Group, Inc. (“VPG,” the “Company,” “we,” “us” or “our”) is a global, diversified company focused on precision measurement sensing technologies, including specialized sensors, weighing solutions, and measurement systems. Many of our precision measurement sensing products and solutions are “designed-in” by our customers, and address growing applications across a diverse array of industries and markets. Our products are marketed under a variety of brand names that we believe are characterized as having a very high level of precision and quality, and we employ an operationally diversified structure to manage our businesses.
Driven by the continued proliferation of data generated by the expanding use of sensors across a widening array of industrial and non-industrial applications, precision measurement technologies help ensure and deliver required levels of quality of mission-critical or high-value data. Over the past few years, we have seen a broadening of precision sensing applications in both our traditional industrial markets and new markets, due to the development of higher functionality in our customers' end products. Our precision measurement solutions are used across a wide variety of end markets upon which we focus, including industrial, test and measurement, transportation, steel, medical, agriculture, avionics, military and space, and consumer product applications. The Company has a long heritage of innovation in sensor technologies that provide accuracy, reliability and repeatability that make our customers' products safer, smarter, and more productive. As the functionality of customers products increases, and they integrate more precision measurement sensors and related systems into their solutions in order to link the mechanical and physical world with digital control and/or response, we believe this will offer substantial growth opportunities for our products and expertise.
Our History
On July 6, 2010, our company was spun off by Vishay Intertechnology, Inc. (“Vishay Intertechnology”) through a tax-free stock dividend of VPG stock to Vishay Intertechnology’s stockholders, and we became a publicly-traded company. Vishay Intertechnology was founded in 1962 by Dr. Felix Zandman to develop and manufacture the first generation of Bulk Metal® foil resistors and later, foil strain gages. Shortly after its founding, Vishay Intertechnology established itself as a technical and market leader in precision foil resistors, and foil strain gages. These innovations were the genesis of the products and technology that provide a unique strategic competitive advantage for VPG, as these products were transitioned to VPG from Vishay Intertechnology as part of the spin off.
In the decade prior to the spin-off, Vishay Intertechnology expanded our sensor and measurement business through acquisitions, extending our business from its initial focus on precision foil resistors and foil strain gages to include an array of load cell-based solutions.
Since becoming an independent company, we have made several acquisitions that have added to our strong, diverse, global manufacturing, sales and distribution network, which includes facilities in Canada, China, France, Germany, India, Israel, Japan, Sweden, Taiwan, the United Kingdom, and the United States.
We were incorporated in Delaware on August 28, 2009. Our principal executive offices are located at 3 Great Valley Parkway, Suite 150, Malvern, PA 19355. Our main telephone number is 484-321-5300.
Key Business Vision and Strategies
Our vision is to be a leading provider of precision measurement sensing technologies, which include sensors, weighing solutions and measurement systems that deliver accuracy, reliability and repeatability that make our customers' products safer, smarter, and more productive. VPG delivers in-depth, deep engineering expertise to the design and manufacture of non-commodity sensors, weighing solutions and precision measurement systems that optimize and enhance our customers’ solutions performance across a broad array of end markets
Our strategy is to leverage our core technologies and competitive positions in our home markets, establishing an accelerated organic growth, as well as by acquiring complementary precision measurement sensing products. Specifically, we are focused on the following strategic initiatives:
- 3 -
Operationally Diversified
In the fourth quarter of fiscal 2021, we formally adopted an operationally diversified structure and strategy, through which each of VPG's business segments maintains and deploys distinct go-to-market strategies, technical expertise, capital requirements, and acquisition opportunities. We use an operationally diversified strategy and structure to be close to our customers and to leverage our high-level engineering expertise to optimize and enhance the performance of our customers' solutions. We seek to maximize the performance and value of our businesses by leveraging our accumulated experience, methodologies, and expertise in driving operational excellence across our functional areas, as well as in the allocation of capital and investment.
Optimize Core Competence
The Company’s core competencies include our innovative deep technical and applications-specific expertise to add value to our customers' products, our strong brands and customer relationships, our focus on operational excellence, our ability to select and develop our management teams, and our proven M&A strategy. We continue to optimize all aspects of our development, manufacturing and sales processes, including by increasing our technical sales efforts; continuing to innovate in product performance and design; and refining our manufacturing processes.
Our Sensors segment research group developed innovations that enhance the capability and performance of our strain gages, while simultaneously reducing their size and power consumption as part of our advanced sensors product line. We believe this unique foil technology will create new markets as customers “design in” these next generation products in existing and new applications. Our development engineering team is also responsible for creating new processes to further automate manufacturing, and improve productivity and quality. Our advanced sensors manufacturing technology also offers us the capability to produce high-quality foil strain gages in a highly automated environment, which we believe results in reduced manufacturing and lead times, improved quality and increased margins. As a sign of our commitment to these businesses, we signed a long-term lease for a state-of-the-art facility that has been constructed in Israel. We fully transitioned to this facility in the third quarter of fiscal 2021.
We also seek to achieve significant production cost savings through the transfer, expansion, and construction of manufacturing operations in countries such as India, China, and Israel, where we can benefit from improved efficiencies or available tax and other government-sponsored incentives. In the past several years, we incurred restructuring expense related to closing and downsizing of facilities as part of the manufacturing transitions of our load cell products to facilities in India and China, which marked key milestones in our ongoing strategic initiatives to align and consolidate our manufacturing footprint.
Organic Growth
Our product portfolio is focused, to a significant extent, on specialty products serving niche markets. The development of specialty products requires us to form long-term relationships with our customers. Our specialty products are usually designed, or engineered, to meet unique specifications for OEMs. This often results in our customers creating a non-standard part number used solely to designate our product on their bill of materials. We call this customer activity a “design win.” This activity may create organic growth as the OEM customer begins to order increasing quantities to meet their production requirements, with little or no opportunity to purchase a similar part from competing suppliers. The “design in” time for these initiatives is typically 12 to 24 months.
We expect to continue to use our research and development, engineering, and product marketing resources to introduce new and innovative specialty products. An example of our success in this regard is the recent acceptance and growth of our on-board vehicle weighing solution incorporating microelectromechanical systems ("MEMS") technology. Our ability to react to changing customer needs, emerging markets, and industry trends will continue to be a key to our success.
Our design, research, and product development teams, in partnership with our marketing teams, drive our efforts to bring innovations to market. We intend to leverage our insights into customer demand to continually develop and roll out new, innovative products within our existing lines and to modify our existing core products in ways that make them more appealing, addressing changing customer needs and industry trends in terms of form, fit, and function.
Growth from Acquisitions
We expect to continue to make strategic acquisitions where opportunities present themselves to grow and expand our segments. Historically, our growth and acquisition strategy had been largely focused on vertical product integration, using our foil strain gages in our load cell products, and incorporating those products into our weighing solutions. In recent years, we widened our acquisition strategy to include a broader set of precision measurement systems and product companies.
- 4 -
In 2013, we completed our first acquisition as an independent public company when we acquired substantially all of the assets of the George Kelk Corporation ("KELK"). KELK engineers, designs and manufactures highly accurate optical and electronic roll force measurement and control equipment primarily used by metals rolling mills and mining applications throughout the world.
On December 30, 2015, we completed the acquisition of Stress-Tek, Inc. ("Stress-Tek") based in Kent, Washington. Stress-Tek designs and manufactures state-of-the-art, rugged and reliable strain gage-based load cells and force measurement systems. Stress-Tek primarily operates in North America, where their sensors and display systems are used in a wide range of industries, predominantly in transportation and trucking, for timber, refuse, aggregate, mining, and general trucking applications.
On April 6, 2016, we completed the acquisition of Pacific Instruments, Inc. ("Pacific Instruments") based in Concord, California. Pacific Instruments designs and manufactures high-performance signal conditioning, data acquisition and control systems and has extensive experience integrating these systems. Pacific Instruments sells primarily to the aerospace, commercial aviation and defense markets in the United States.
On November 1, 2019, we completed the acquisition of New York-based Dynamic Systems Inc. ("DSI"), a provider of specialized dynamic thermal-mechanical test and simulation systems used to develop new metal alloys and optimize production processes. DSI is an established, high margin business, with a strong brand and has the largest installed base of products of its type in the world, according to market estimates. DSI expands our position in the steel market and offers opportunities for growth by leveraging our sales capabilities and market presence, and by expanding DSI’s product line to address new opportunities.
On June 1, 2021, we completed the acquisition of California-based Diversified Technical Systems, Inc. (“DTS”), a leading manufacturer of data acquisition systems and sensors for product and safety testing. DTS's embedded data acquisition and data logging products expands our offerings to the automotive and avionics, military, and space markets. We believe DTS will continue to benefit from the global need for specialized safety testing that is expanding from the automotive and avionics sectors to sports applications. As a result of our acquisition, we acquired a leased manufacturing, engineering, sales and administrative facility in Seal Beach, California.
We expect to expand our expertise, and our acquisition focus, outside our traditional vertical approach to other precision measurement solutions, including in the fields of measurement of force, weight, pressure, torque, tilt, motion, and acceleration. We believe acquired businesses will benefit from improvements we implement to reduce redundant functions and from our current global manufacturing and distribution footprint.
Leverage Global Brand
While our acquisitions provided us an array of strong brand names, in addition to our historical resistor and strain gage brands, we believe the continued success of our strategy is best served by the establishment of a strong overall global brand. The “VPG” brand leverages the strength of these historical brands under the umbrella of a unified, globally recognizable VPG name. We continue to broaden and emphasize the VPG brand in the markets we serve under the following brands for each of our business segments:
Sensors Weighing Solutions Measurement Systems
VPG Foil Resistors VPG Transducers KELK
- Alpha Electronics - Celtron Dynamic Systems Inc. or Gleeble
- Powertron - Revere DTS
- Vishay Foil Resistors - Sensortronics Pacific Instruments
Micro-Measurements - Tedea-Huntleigh
VPG Onboard Weighing
Stress-tek
Vulcan
BLH Nobel
- 5 -
Business Segments and Products
In the fourth quarter of fiscal 2021, we formally adopted an operationally diversified structure and strategy, by which each of VPG's business segments maintains and deploys specific go-to-market strategies, technical expertise, capital requirements, and acquisition opportunities. As a result, we realigned our businesses into new reporting segments as follows (with affected businesses in bold and italics):
Former Reporting Segments New Reporting Segments
Foil Technology Products Sensors
Precision Resistors Precision Resistors
Strain gages Strain gages
Data acquisition systems - avionics
Force Sensors Weighing Solutions
Load Cells Load cells
On-board weighing systems
Process weighing
Weighing and Control Systems Measurement Systems
Process weighing Data acquisition systems - avionics
On-board weighing systems
Material testing and simulation systems Material testing and simulation systems
Sensors
The Sensors segment is comprised of our precision resistor and strain gage businesses. Precision resistor products offer superior precision, stability, and reliability. Our resistor portfolio encompasses a wide variety of configurations and packages designed to meet the requirements of even the most demanding applications.
Precision resistors are the most precise and stable type of resistors currently available. Resistors are basic components used in all forms of electronic circuitry to adjust and regulate levels of voltage and current. Our current sense resistors were developed with a low absolute TCR and Kelvin connections to meet the demand of stable resistive products.
Our precision resistors are used in applications requiring a high degree of precision and stability, such as in the following market segments: Avionics/Military/Aerospace applications, Precision Weighing, Medical applications, Test & Measurements/ Semiconductors, Oil & Gas and Process Control. We sell our foil resistors under the VPG Foil Resistors, Alpha Electronics, and Powertron brands, including under our well-known Bulk Metal® trademark. To complement our extensive portfolio of high-performance precision resistors, we also offer decade boxes, standard resistors, exceptional precision thin film and power resistors including special construction configurations to meet the requirements of high temperature applications. We have a road map of new technology products to meet the required needs of our customers.
Our strain gage products, which include our advanced sensors, are resistive sensors that are attached to the surface of an object to determine the surface strain caused by an applied force. Marketed under the well-known Micro-Measurements brand, our strain gages are used for OEM and in stress analysis applications for structural testing in the aviation, military and space, infrastructure, and construction markets, along with force measurement and weighing markets. Typical applications of strain gages include test and measurement applications where the strength of the object is the main consideration and the object under test is a structural component in a machine or device, such as an automobile, an aircraft, or a highway bridge. Strain gages are also used inside precision transducers where the magnitude of an applied force is the focus of the measurement. A variety of physical measurements can be made using strain gages attached to metal components including force, weight, pressure, displacement, and acceleration. Our innovative advanced sensors product line enhances the capability and performance of our strain gages, while simultaneously reducing their size and power consumption.
A significant portion of our strain gage products are sold to third parties as “standard catalog items”, while the remainder of these products are sold as non-standard and/or custom products to third parties and to our Weighing Solutions segment.
The products in the Sensors segment are primarily based on our resistive foil technology, which continues to evolve and enables many products in both segments to be suited for new and varied applications.
- 6 -
The manufacturing of the foil material is a critical and common component of the Company’s strain gage and precision foil resistor operating segments, and as a result, we experience synergies between our precision resistor and strain gage operating segments. The production cycles for precision resistors and strain gages are similar and many of the same raw materials are utilized in the manufacturing processes for both operating segments. The foil resistor and strain gage products require a similar level of labor and capital. However, the advanced sensors’ manufacturing technology offers us the capability to produce high-quality foil strain gages in a highly automated environment, which we believe results in reduced manufacturing costs and lead times, higher quality, and increased margins.
Weighing Solutions
The Weighing Solutions segment is comprised of our VPG Transducers, VPG Onboard Weighing, BLH Nobel, Stress-Tek and Vulcan businesses.
VPG Transducers offers a broad line of load cells and force measurement transducers, which also known as force sensors, that are offered as precision sensors for industrial and commercial use. Typical applications for force sensors are in construction machinery (for stability control, overload protection), agricultural equipment (for precision force measurement), and medical devices (such as hospital beds and medication dosing). The heavy equipment market has begun to adopt load cell technology as process control and equipment control features for their products. In some cases, these products use our strain gage products, which serve as sensing elements and components within each unit. Further integration of our load cell technology is also offered as part of our weighing module products, which provide customers with a complete sensor assembly that may be used within a wide variety of digital transducers.
A transducer is mounted on a structure that is subjected to weight or other forces, such as the platform of an industrial scale. The term “load cell” is primarily used to describe transducers used in weighing applications. Strain-gage based transducers consist of one or more strain gages bonded to a metallic support. The change in resistance of the strain gages in response to deformation of the transducer by the applied load is detected by electronic instrumentation. Transducers are manufactured with different designs and configurations depending on their application and the type of stress or strain to be measured; for example, weight or tension. We produce both analog and digital transducers. Modules are transducers combined with a mounting and with external features, such as instruments and cables, and are used for weighing and control applications. We sell our load cells and modules under the overall VPG Transducers name as we continue to transition from the previously used Celtron, Revere, Sensortronics, and Tedea-Huntleigh brands.
A majority of VPG Transducer load cell products are sold to third parties as “standard catalog items,” but a growing sector of this segment’s products are sold as non-standard and/or custom products to third parties. In addition, we sell products from this segment to our Measurement Systems segment as well as to OEM manufacturers. Our sales teams act as direct sales channels (field application engineers (“FAEs”)) utilizing the primary customer interface relating to initial design specifications, development of prototypes, and pricing/delivery of this segment’s products. Distributors are also used for those customers that desire standard products.
Our VPG Onboard Weighing business specializes in high-quality, high-accuracy vehicle weighing and load monitoring systems for all commercial vehicle types, including trucks, vans and specialty vehicles. Many of these products use solid-state sensors. VPG Onboard Weighing products, sold under the brand names TruckWeigh and VanWeigh, are used by drivers and fleet operators to monitor vehicle loads within legally permitted limits and regulations.
Our Stress-Tek, Vulcan, and BLH Nobel businesses mainly provide load cells and instrumentation for weighing and force control/measurement for a variety of uses. These include systems to control process weighing in food, chemical, and pharmaceutical plants; force measurement systems used to control web tension in paper mills, cable tension in winch controls; onboard weighing systems installed in logging and waste-handling trucks; and special scale systems used for aircraft weighing and portable truck weighing.
Major components that comprise our Weighing Solutions products include: load cells, electronic displays, optical gages, laser systems, signal processors, MEMS sensors, cabling, system software, and communications software/hardware. The end use for the majority of these products is the precision measurement of force, weight, pressure, torque, tilt, motion, and acceleration. FAEs are utilized as the primary customer interface relating to initial design specifications, development of prototypes, and pricing/delivery of this segment's products. We also use distributors and sales agents, as appropriate, to market, sell, and support certain products in this segment.
Measurement Systems
The Measurement Systems segment includes highly specialized systems for steel production, materials development, and safety testing. This segment is comprised of our KELK, DSI, Pacific Instruments, and our DTS businesses.
- 7 -
Our KELK business provides high accuracy and performance sensors and systems for the steel and aluminum industries — and within those industries, mainly for rolling mills. KELK's products include rolling force measuring load cell systems and pressure transmitters; web tension measurement load cells and systems; optical strip width gages; laser velocimeters for speed and length measurements, and closed-loop crop optimization control systems for optimal strip cuts. Our products are required to meet the most demanding requirements of the steel and aluminum industries, providing high accuracy and reliability under the most demanding harsh conditions of rolling mills.
Our DSI business specializes in thermal-mechanical simulation systems for metallurgical research. Marketed under the name "Gleeble®", DSI's line of physical simulation systems are used by universities, research departments, and development departments within the steel ecosystem to accelerate the development of new metal alloys, explore new production techniques, optimize existing processes, or simulate the conditions a material will face in the real world.
Our Pacific Instruments business offers a broad range of high performance signal conditioning, data acquisition and control systems, many of which reach customers outside our traditional commercial customer base, such as U.S. government-related customers.
Our DTS business provides data acquisition systems and sensors for product safety testing. As a major supplier of embedded data acquisition and data logging capabilities for crash test dummies, DTS expands our offering in the automotive market and in the avionics, military and space market. We believe DTS will continue to benefit from the global need for specialized safety testing technology that is expanding from the automotive and avionics sectors to other applications such as sports safety.
Qualifications and Specifications
Certain of our products must be qualified or approved under various military and aerospace specifications and other standards.
We have qualified certain of our foil resistor and sensor products under various military specifications approved and monitored by the United States Defense Logistics Agency (“DLA”), under certain European military specifications, and various aerospace standards approved by the U.S. National Aeronautics and Space Administration (“NASA”) and the European Space Agency (“ESA”).
Qualification and specification levels are based in part upon the rate of failure of products. We must continuously perform tests on our products, and report the results for qualified products to the qualifying organization. If a product fails to meet the requirements for the applicable classification level, the product’s classification may be suspended or reduced to a lower level. During the time that the classification is suspended or reduced, net revenues and earnings attributable to that product may be adversely affected.
Certain of our load cell and instrumentation products are approved by the National Type Evaluation Program (“NTEP”) and International Organization of Legal Metrology (“OIML”). Many of our weighing systems must also meet these standards to make them usable for legal-for-trade weighing applications. Products and systems that are to be used in hazardous areas, where explosive atmospheres might exist, must comply with special safety standards, such as the European Atmosphère Explosible (“ATEX”) Standard and the U.S. Factory Mutual (“FM”) Standard. Our load cell manufacturing sites undergo periodic audits by regulatory authorities in order to verify compliance with standard requirements and to extend product approvals.
Manufacturing Operations
Our principal manufacturing facilities are located in Israel, the United States, Canada, India, the People’s Republic of China, Germany, and Japan. We also have manufacturing facilities in Sweden, the United Kingdom, the Republic of China (Taiwan), and France. Over the past several years, we have invested substantial resources to increase capacity and to enhance automation in our plants, which we believe will further reduce production costs.
We have quality management systems at all of our major manufacturing facilities approved under the ISO 9001 Quality Management Systems Standard. ISO 9001 is a comprehensive set of quality program standards developed by the International Organization for Standardization ("ISO"). The quality management system in our major foil resistors manufacturing site is certified against Aerospace Standard AS9100.
To maintain our cost competitiveness, we are pursuing our strategic initiatives to shift manufacturing emphasis to more advanced automation in higher-labor-cost regions and to relocate production to regions with skilled workforces and relatively lower labor costs. See additional information in Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Cost Management” related to our restructuring efforts.
- 8 -
Sources of Supplies
Although most materials incorporated in our products are available from a number of sources, certain materials are available only from a relatively limited number of suppliers. The principal materials used in our products include various metallic foil alloys, aluminum, stainless steel, tool steel, plastics, and for a few products, gold. Some of the most highly specialized materials for our sensors are sourced from a single vendor. We maintain a safety stock inventory of certain critical materials at our facilities. We are taking steps to determine the use, source, and origin of any tin, tantalum, tungsten, or gold in our global product portfolio and, if appropriate, would work with our suppliers to remediate issues and source more responsibly.
A portion of our Weighing Solutions and Measurement Systems segment products are based on strain gages produced by our Sensors segment.
Inventory and Backlog
We manufacture both standardized products and those designed and produced to meet customer specifications. We maintain an inventory of standardized components, and monitor the backlog of outstanding orders for our products.
We include in our backlog only open orders that have been released by the customer for shipment in the next twelve months. Many of our customers for strain gages, load cells, and foil resistors encounter uncertain and changing demand for their products. They typically order products from us based on their forecasts. If the customers' business needs change, they may cancel or reschedule the shipments that are included in our backlog, in many instances without the payment of any penalty. Therefore, the backlog at any point in time is not necessarily indicative of the results to be expected for future periods.
Customers and Marketing
Our customer base is diversified in terms of industry, geographic region, and range of product needs. No single customer comprises greater than 10% of net revenues. A portion of our products are used in the broad industrial market for wide variety of applications in waste management, bulk hauling, logging, scales manufacturing, engineering systems, pharmaceutical, oil, chemical, steel, paper, and food industries. In addition, we sell to an expanding array of end markets including test and measurement, steel, medical, construction, agricultural, and consumer.
Many of our products have historically been sold by dedicated sales forces, consisting mainly of FAEs focusing on specific market segments or specific customers. The FAEs help identify the products in our portfolio that best meet the needs of our customers and provide technical and applications support. Their in-depth knowledge of customer needs is a key factor in new product design and future research and development initiatives.
Competition
Our competitive success depends on our ability to maintain a competitive advantage on the basis of superior product capability and performance, product quality, know-how, proprietary data, market knowledge, service capability, and business reputation. Price competitiveness can be an important factor, especially within our Weighing Solutions segment. Our sales and marketing programs offer our customers a broad range of world-class precision technologies, and superior global sales and support.
Competition in the markets where we sell the bulk of our products is extremely fragmented, both geographically and by application. To our knowledge, there are no competitors with the same product mix and proprietary technology as ours. Our competitors range from very small, local companies to large, international companies with greater financial resources than us.
Our foil resistors and our foil strain gages are based on our proprietary technology. Competitors try to compete in this market using different technology to offer functionally equivalent products. Examples of competition in our Sensors segment includes KOA, Bourns, Vishay Intertechnology, TT Electronics, Susumu, Isabellenhute, Caddock and Flat Dashi for foil resistors, and HBK, an operating company of Spectris, Tokyo Sokki Kenkyujo Co., Ltd (TML), Kyowa and Zemic for foil strain gages. Competitors in our Weighing Solutions segment include HBK, Zemic, Utilcell, Flintec, Hardy Instruments and Mettler-Toledo for load cell products, and Air-Weigh, Vehicle Weighing Systems, MOBA, and AMCS for onboard weighing products. In the Measurement Systems segment, we compete with ABB, Siemens, Haehne, Dalian, IMS and Fuji in the steel market and Kistler for data acquisition systems.
Research and Development
Many of our products, manufacturing techniques, and technologies have been invented, designed, and developed by our engineers and scientists. Special proprietary resistive metal foil is the most important material in both our foil resistors and our foil strain gages, and our research and development activities related to foil materials are an important linkage between these two products.
- 9 -
We maintain strategically placed design centers for each of our business segments where proximity to customers enables us to more easily monitor and satisfy the needs of local markets. These design centers are located in the United States, Israel, Canada, Sweden, Japan, the United Kingdom, and Germany.
We also maintain research and development staff, and promote programs at a number of our production facilities to develop new products and new applications of existing products, and to improve manufacturing techniques. This decentralized system encourages individualized product development at specific manufacturing facilities that occasionally has applications at other facilities.
Our research and development staff and our sales force are closely linked. Our sales force is comprised of individuals with an engineering background who can help meet the needs of our customers for technical and applications support. This in-depth knowledge of customer needs and specifications is a key factor in future research and development initiatives.
Research and development will continue to play a key role in our efforts to introduce innovative products for new sales, and to improve profitability. We expect to continue to expand our position as a leading supplier of precision foil technology products. We believe our R&D efforts should provide us with a variety of opportunities to leverage technology, products, and our manufacturing base and, ultimately, our financial performance. To that end, we expect to sustain or increase our R&D expenditures in order to fill the product development pipeline and lay the foundation for future sales growth.
Patents and Licenses
We have made a significant investment in securing intellectual property protection for our technology and products. We seek to protect our technology by, among other things, filing patent applications for technology considered important to the development of our business. Although we have numerous United States and foreign patents covering certain of our products and manufacturing processes, no particular patent is considered individually material to our business. We also rely upon trade secrets, unpatented know-how, and continuing technological innovation.
Our ability to compete effectively with other companies depends, in part, on our ability to maintain the proprietary nature of our technology. Although we have been awarded, have filed applications for, or have obtained numerous patents in the United States and other countries, there can be no assurance concerning the degree of protection afforded by these patents, or the likelihood that pending patents will be issued.
We require all of our technical, research and development, sales and marketing, and management employees, and most consultants and other advisors to execute confidentiality agreements upon the commencement of employment, or consulting relationships with us. These agreements provide that all confidential information developed, or made known to the entity or individual during the course of the entity’s or individual’s relationship with us, is to be kept confidential and not disclosed to third parties except in specific circumstances. Substantially all of our technical, research and development, sales and marketing, and management employees have entered into agreements providing for the assignment to us of rights to inventions made by them while employed by us.
Environmental, Social and Governance
We have issued an Environmental, Health and Safety Policy that commits us to achieve health and safety for employees and protection of the environment, to maintain compliance with applicable environmental, health and safety laws, to promote proper management of hazardous materials, and to minimize the hazardous materials generated in the course of our operations. In addition, our manufacturing operations are subject to various regional, federal, state, and local laws restricting discharge of materials into the environment. Since we are subject to Environmental, Health and Safety laws worldwide we incur capital and operating expenditures and other costs to comply. We are not involved in any pending or threatened proceedings that would require curtailment of our operations.
The Company has launched a corporate Environmental, Social and Governance ("ESG") program and plans to complete a materiality assessment, scorecard and short and long-term objectives with deliverables during 2022. We still expect that this multi-year ESG plan will occur in three phases, including defining ESG ambitions, implementing a reporting strategy, and planning and executing employee ESG training and improving ESG awareness for all employees. The ESG program is built on four pillars: Our People, Our Environment, Our Governance and Our Products.
Human Capital
As of December 31, 2021, we employed approximately 2,600 total employees, substantially all of which were full-time employees. Approximately 79% of our employees were located outside the United States. Our future success is substantially dependent on our ability to attract and retain highly qualified technical and administrative personnel. Some of our employees outside the United States are members of trade unions.
- 10 -
We support worldwide employment and promotion of diversity to innovate and drive long-term value, by continuous monitoring of compensation and benefits to assure competitiveness, while implementing a worldwide talent strategy that includes workforce planning and succession planning.
The impact of COVID-19 on our operations has been mitigated through the issuance of Guidelines for Manufacturing Safety, Travel Safety and Personal Protective Equipment sourcing to ensure employee and visitor, contractor safety and continuity of operations. We have had no employee strikes or work stoppages due to labor disputes and we consider our relationship with employees to be generally good, however, no assurance can be given that labor unrest or strikes will not occur. We continue to support employee’s rights to collective bargaining and other recognized employee interests to organize.
Information about our Executive Officers
The following table sets forth certain information regarding our executive officers as of March 4, 2022:
Name Age Positions
Ziv Shoshani 55 Chief Executive Officer, President, and Director
William M. Clancy 59 Executive Vice President and Chief Financial Officer
Amir Tal 52 Senior Vice President and Chief Accounting Officer
Ziv Shoshani is our Chief Executive Officer and President, and also serves on the board of directors. Mr. Shoshani was Chief Operating Officer of Vishay Intertechnology from January 1, 2007 to November 1, 2009. During 2006, he was Deputy Chief Operating Officer of Vishay Intertechnology. Mr. Shoshani was Executive Vice President of Vishay Intertechnology from 2000 to 2009 with various areas of responsibility, including Executive Vice President of the Capacitors and the Resistors businesses, as well as heading the Measurements Group and Foil Divisions. Mr. Shoshani had been employed by Vishay Intertechnology since 1995. He continues to serve on the Vishay Intertechnology board of directors. Mr. Shoshani is a nephew of the late Dr. Felix Zandman, the founder of Vishay Intertechnology.
William M. Clancy is our Executive Vice President and Chief Financial Officer. Mr. Clancy was Corporate Controller of Vishay Intertechnology from 1993 until November 1, 2009. He became a Vice President of Vishay Intertechnology in 2001 and a Senior Vice President of Vishay Intertechnology in 2005. Mr. Clancy served as Corporate Secretary of Vishay Intertechnology from 2006 to 2009. From June 16, 2000 until May 16, 2005 (the date Vishay Intertechnology acquired the noncontrolling interest in Siliconix incorporated), Mr. Clancy served as the principal accounting officer of Siliconix. Mr. Clancy had been employed by Vishay Intertechnology since 1988. Mr. Clancy is a licensed CPA in Pennsylvania.
Amir Tal is our Senior Vice President and Chief Accounting Officer. Mr. Tal was appointed by the board of directors to such position effective February 5, 2020. He served as the Company’s Senior Vice President, Finance from March 2017 until February 2020. From July 2010 to February 2017, Mr. Tal served as the Company’s Vice President Operational Controller and Regional Controller Israel. Mr. Tal holds a bachelor’s degree in economics and business administration from the University of Haifa and an MBA from Bar Ilan University.
Company Information and Website
We began filing annual, quarterly, and current reports, proxy statements, and other documents with the Securities and Exchange Commission (“SEC”) under the Securities Exchange Act of 1934 after our spin-off from Vishay Intertechnology on July 6, 2010. The SEC maintains an Internet website that contains reports, proxy and information statements, and other information regarding issuers, including us, that file electronically with the SEC. The public can obtain any documents that we file with the SEC at www.sec.gov.
In addition, our company website can be found on the Internet at www.vpgsensors.com. The website contains information about us and our operations. Copies of each of our filings with the SEC on Form 10-K, Form 10-Q, and Form 8-K, and all amendments to those reports, can be viewed and downloaded free of charge as soon as reasonably practicable after the reports and amendments are electronically filed with or furnished to the SEC. To view the reports, access http://ir.vpgsensors.com and click on “Financials”/ “SEC Filings.”
The following corporate governance related documents are also available on our website:
•Compensation Committee Charter
•Nominating and Corporate Governance Committee Charter
•Audit Committee Charter
•Code of Business Conduct and Ethics
- 11 -
•Code of Ethics Applicable to the Chief Executive Officer, Chief Financial Officer, and Principal Accounting Officer or Controller
•Corporate Governance Principles
•Policy Regarding Qualifications of Directors
To view these documents, access http://ir.vpgsensors.com and click on “Governance” and then on "Governance Documents."
To view our Ethics Program Reporting Procedures, access http:/www.vpgsensors.com/Ethics
We are not incorporating by reference into this Annual Report on Form 10-K any material from our website.
Any of the above documents can also be obtained in print by any stockholder, upon written request to our Investor Relations Department at the following address:
Corporate Investor Relations
Vishay Precision Group, Inc.
3 Great Valley Parkway, Suite 150
Malvern, PA 19355
- 12 -
Item 1A.RISK FACTORS
You should carefully consider the following risks and other information in this Form 10-K in evaluating our company and common stock. Any of the following risks, as well as additional risks and uncertainties not currently known to us or that we currently deem immaterial, could materially and adversely affect our business, results of operations or financial condition, and could also adversely affect the trading price of our common stock.
Risks Related to Our Business
The COVID-19 outbreak has adversely impacted and could continue to adversely impact our results of operations.
The impact of the COVID-19 outbreak and the spread of the novel coronavirus on a global basis have adversely affected and are likely to continue to adversely affect our business in a number of respects, although the further extent, nature and timing of such impact cannot be predicted at this time. The COVID-19 outbreak has led countries around the world, as well as most states in the U.S., to from time-to-time implement restrictions relating to the operation of almost all types of businesses. The closure standards vary from jurisdiction to jurisdiction, but they typically require all but “critical”, “essential” or “life-sustaining” businesses to close all offices and facilities. We believe, based on the various standards published to date, that our businesses meet or will meet the requisite standards to remain open, at least partially, in all jurisdictions in which we operate, although there is no assurance that our decision to remain open will not be challenged. As of the date of this filing, all of our manufacturing and other facilities are operating at adequate capacity while following procedures designed to prevent the spread of the virus, such as social distancing, reduced personnel and staggered shifts. Changing standards regarding what type of facilities are permitted to remain open, as well as evolving interpretations of existing standards, in both the United States and around the globe, could result in the closure of some or all of our facilities.
To date, our supply chain has not experienced significant disruptions, and at this time. we do not anticipate any such significant disruptions in the near term. However, our suppliers could be required by government authorities to temporarily cease operations in accordance with the various restrictions discussed above, might be limited in their production capacity due to complying with restrictions relating to the operation of businesses during the COVID-19 pandemic, or could suffer their own supply chain disruptions, impacting their ability to continue to supply us with the quantity of materials required by us.
If as a result of the COVID-19 outbreak governments take additional protective actions, or extend the time period for existing protective actions, or the distribution and administration of the vaccines for COVID-19 are delayed, disrupted, or prolonged, such actions or events may have a material adverse impact on our business and operating results. This could include closures of our facilities or the closure of the facilities of our customers, suppliers, or other vendors in our supply chain. Any disruption of our supply chain or the businesses of our customers could adversely impact our business and results of operations. In addition, the widespread public health crisis caused by the COVID-19 outbreak has adversely impacted the economies and financial markets worldwide, and in 2020 resulted in an economic downturn that adversely impacted many businesses, including ours. The extent and duration of the impact on the global economy and financial markets from COVID-19 is difficult to predict, and the extent to which the COVID-19 will negatively affect us and the duration of any potential business disruption is uncertain. The impact to our business and results of operation will depend to a large extent on future developments and new information that may emerge regarding the duration and severity of the COVID-19 outbreak and the actions taken by authorities and other entities to contain COVID-19 or treat its impact, and the impact of such actions, all of which are beyond our control. These potential impacts, while uncertain, could adversely affect our operating results.
A shortage of qualified labor could have a material adverse effect on our business and results of operations.
Labor is a significant component of operating our business. A number of factors may adversely affect the labor force available to us or increase labor costs, including general macroeconomic conditions, high employment levels, federal unemployment subsidies, including unemployment benefits offered in response to the COVID-19 pandemic, increased wages offered by other employers, vaccine mandates and other government regulations and our responses thereto. We are currently experiencing a shortage of qualified labor in certain geographies, particularly with manufacturing plant production workers in the United States, Israel and Japan. Outside suppliers that we rely on have also experienced shortages of qualified labor. A prolonged shortage of qualified labor could, among other things, decrease our ability to effectively produce and meet customer demand, and could have a material adverse effect on our business and results of operations.
We face intense competition in our business.
We face various degrees and types of competition throughout the world in our different businesses. We are a leading supplier of foil resistors and foil strain gages. Foil resistors and foil strain gages are also produced by competitors, principally located in China. We believe that our products provide superior performance relative to our competitors, but that could change if our competitors succeed in developing and introducing innovative competitive offerings. Also, our foil strain gages compete with other types of strain gages, such as semiconductor strain gages, which we do not manufacture. We believe that other types of strain gages are not as reliable or stable as our foil strain gages, but that could change as the technology for these other products
- 13 -
continues to evolve. If our competitors are able to improve the quality, performance, or pricing of their products relative to our offerings, our results of operations could be adversely affected.
The market for transducer/load cell products is highly fragmented and very competitive. Our load cell modules and systems face competition from numerous other load cell module and systems manufacturers. Competition for modules and systems is most often based on customer relationships, product reliability, technical performance, and the ability to anticipate and satisfy customer needs for specific design configurations. Many other manufacturers have more experience in particular geographic markets and specific applications than we do, and may be better positioned to compete in these areas. We cannot assure you that we will be able to successfully grow our business in the face of these competitive challenges.
To remain successful, we must continue to innovate, and our investments in new technologies may notprove successful.
Our future operating results depend on our ability to continually develop, introduce, and market new and innovative products, to modify existing products, to respond to technological change, and to customize certain products to meet customer requirements. There are numerous risks inherent in this process, including the risks that we will be unable to anticipate the direction of technological change, that customers may be unwilling, or unable, to adopt the new products or methods of using them, that we will be unable to develop and market new products and applications in a timely fashion to satisfy customer demands, or that such products will experience quality or other qualification issues with our customers as they, and we, gain experience with qualifying them and using them. If this occurs, we could lose customers and experience adverse effects on our financial condition and results of operations.
We may not be successful in future acquisitions or other strategic transaction endeavors, if any, which could have an adverse effect on our business and results of operations.
Historically, we expanded our business in part by completing acquisitions, and an important element of our business strategy continues to be expansion through acquisition. We cannot assure that we will identify, have the financial capabilities to execute, and/or successfully complete strategic transactions with suitable partners in the future. We also cannot assure that any such transactions that we do complete in the future will be successful.
Such transactions, including our acquisition of DTS in June 2021, involve a number of risks, including the following:
•we may incur substantial costs, including advisory fees and diversion of management attention, in evaluating a potential transaction;
•we may be unable to achieve the anticipated benefits from the transaction;
•we may have difficulty integrating the operations, personnel and culture of an acquired business, and may have difficulty retaining the key personnel of the acquired business;
•we may have difficulty enforcing restrictive covenants against the seller of the acquired business or former employees or other personnel of the acquired business;
•we may have difficulty incorporating acquired technologies or products into our existing solutions;
•our ongoing business and management's attention may be disrupted or diverted by transition or integration issues, and the complexity of managing geographically and culturally diverse locations; and
•we may lose customers of those companies, or may lose our customers due to the change in control or for other reasons.
The factors noted above could have a material adverse effect on our business, results of operations, and financial condition or cash flows, particularly in the case of a larger acquisition. From time to time, we may enter into negotiations for acquisitions or investments that are not ultimately consummated. These negotiations could result in significant diversion of management time, as well as out-of-pocket costs.
Future acquisitions may require us to incur or issue additional indebtedness or issue additional equity.
If we were to undertake future substantial acquisitions for cash, these acquisitions would likely need to be financed in part through bank borrowings, or the issuance of public or private debt. This acquisition financing would likely adversely affect certain credit metrics. Our revolving credit facilities require us to obtain the lenders’ consent for certain additional debt financing and to comply with other covenants, including the application of specific financial ratios. We cannot assure that the necessary acquisition financing would be available to us on acceptable terms, if and when, required. If we were to make an acquisition with equity, the acquisition may have a dilutive effect on the interests of the holders of our common stock.
We may experience difficulties, delays, or unexpected costs in completing our cost reduction programs.
To remain competitive, particularly when business conditions are difficult, we sometimes take steps to reduce our cost structure by restructuring our existing businesses to achieve efficiencies, eliminate redundant functions, facilities and staff positions, and move operations, where possible, to reduce labor or other costs.
We may not realize, in full or in part, the anticipated benefits of these programs without encountering difficulties, which may include complications in the transfer of production knowledge, loss of key employees and/or customers, and the disruption of
- 14 -
ongoing business. Any of these difficulties could delay and/or undermine our ability to realize the benefits of these cost reduction programs, as well as potentially adversely affecting our customer relationships and operations.
Our business is cyclical, and in periods of increased economic strength, we may experience intense demand for our products. If our cost reduction programs and related restructuring result in us not being able to satisfy our customer’s demand for products during a rising economy, and our competitors sufficiently expand production, we could lose customers and/or market share. These losses could have an adverse effect on our operations, financial condition, and results of operations.
We may encounter difficulties in the implementation or operation of new enterprise resource planning systems.
We have implemented, and continue to implement, new enterprise resource planning (“ERP”) systems in different parts of our business. ERP systems are integral to our ability to accurately and efficiently manage our manufacturing and sales activities, and provide critical business information to management. The implementation of an ERP system may cause us to incur additional costs, shipment delays, and related customer dissatisfaction; expend employee (including Company management) time and attention; and otherwise burden our internal resources. Any difficulties we encounter with the implementation or successful operation of an ERP system could damage the effectiveness of our business processes and could adversely impact our ability to accurately and effectively forecast and manage sales demand, manage our supply chain, and report management information on an accurate and timely basis, any of which could have a material adverse effect on our business and results of operations.
Our success is dependent upon our ability to protect our proprietary technology and other intellectual property.
We rely on a combination of the protections provided by applicable patent, trademark, copyright, and trade secret laws, as well as on confidentiality procedures and other contractual arrangements, to establish and protect our rights in our technology, and related materials and information. We enter into agreements with our customers and distributors. These agreements contain confidentiality and non-disclosure provisions, a limited warranty covering our products, and indemnification for the customer from infringement actions related to our products.
Despite our efforts, it may be possible for others to copy portions of our products, reverse engineer them, or obtain and use information that we regard as proprietary, all of which could adversely affect our competitive position. Furthermore, there can be no assurance that our competitors will not independently develop technology similar to ours. The laws of certain countries in which we manufacture do not protect our intellectual property ("IP") rights to the same extent as the laws of the United States. In the Office of the United States Trade Representative (“USTR”) annual "Special 301" Report released in April 2021, the adequacy and effectiveness of intellectual property protection in a number of foreign countries were analyzed.
A number of countries in which we manufacture or do business in are identified in the report as being on the Priority Watch List or the Watch List. In China, for instance, the USTR is concerned about the urgent need to remediate a range of IP-related concerns, including trade secret theft, online piracy and counterfeiting, the high-volume manufacture and export of counterfeit goods, technology transfer requirements imposed as a condition to access the Chinese market, the mandatory application of adverse terms to foreign IP licensors, and IP ownership and research and development localization requirements. Structural impediments to administrative, civil, and criminal IP enforcement are also problematic. The USTR also expressed concern that in India there is a lack of sufficient measurable improvements to its IP framework on long-standing and new challenges that have negatively affected U.S. right holders over the past year. Other countries in which we do business were also identified because of problems in intellectual property enforcement. The absence of harmonized intellectual property protection laws and effective enforcement makes it difficult to ensure consistent respect for patent, trade secret, and other intellectual property rights on a worldwide basis. As a result, it is possible that we will not be able to enforce our rights against third parties that misappropriate our proprietary technology in those countries.
The success of our business is highly dependent on maintenance of intellectual property rights.
The unauthorized use of our IP rights may increase the cost of protecting these rights or reduce our revenues. We seek to protect trade secrets and our other proprietary technology, in part, by requiring each of our employees to enter into non-disclosure and IP assignment agreements. In these agreements, the employee agrees to maintain the confidentiality of all of our proprietary information and, subject to certain exceptions, to assign to us all rights in any proprietary information or technology made, or contributed, by the employee during his or her employment. Generally, we do not enter into non-compete arrangements with our employees, with the exception of certain executives and, in some cases, one or more of the principals of the businesses that we acquire.
All of these types of agreements may be breached or be found unenforceable, and we may not have an adequate remedy for any such breach of, or inability to enforce, these agreements. We may initiate, or be subject to, claims or litigation for infringement of proprietary rights, or to establish the validity of our proprietary rights, which could result in significant expense to us, cause product shipment delays, require us to enter royalty or licensing agreements, and divert the efforts of our technical and management personnel from productive tasks, whether or not such litigation were determined in our favor.
- 15 -
We may be exposed to product liability claims.
While our agreements with our customers and distributors typically contain provisions designed to limit our exposure to potential material product liability claims, including appropriate warranty, indemnification, damages waiver, and limitation of liability provisions, it is possible that such provisions may not be effective under the laws of some jurisdictions, thus exposing us to substantial liability. Moreover, defending a suit, regardless of its merits, could entail substantial expense, and require the time and attention of key management personnel. If product liability claims are brought against us, the costs associated with defending such claims may adversely affect our results of operations and future cash flows.
We must expend significant resources to obtain design wins without assurance that we will be successful.
In many cases, we must initiate communication with our customers, and convince the customer that our products and systems will offer solutions for its business that are technically superior and more cost effective compared to their existing arrangements. To do so, we must often expend significant financial and human resources to develop technologically compelling products or systems with no guarantee that they will be adopted by our customers. The non-recurring engineering (“NRE”) costs for product development in these cases could be substantial, and may adversely affect our profitability if we are unable to recover these costs.
Also, customers will often require a lengthy period of on-site testing before committing to purchase a product or system, during which period we will not receive material revenue from the customer. While a design win for our products and systems may result in a long period of recurring revenue during which we hope to recover our costs, we must often internally finance our development costs over significant time periods. If our products or systems fail to gain acceptance with our customers, we will be forced to absorb any NRE costs, which could adversely affect our business if these costs are substantial.
The long development times for certain of our products and systems may result in unpredictable fluctuations in revenue and results of operations.
Our force sensor products, and weighing and control systems, often have long product development cycles, both to develop the product or system and to secure customer acceptance following what may be a lengthy on-site testing period. During product development and testing, we may incur substantial costs without corresponding revenues. If our custom product or system is ultimately accepted by the customer, we may then begin to realize substantial revenues from our development efforts.
In particular, our weighing and control systems can be priced for several hundred thousand dollars per unit, so that a contract to acquire one or more units can materially contribute to our revenues during the period or periods that we are permitted to recognize the contract revenues for accounting purposes. The nature of our weighing and control products and systems, and in particular, the products and systems manufactured by the steel business, may therefore result in substantial fluctuations in our operating results, including revenues and profitability, from period to period, even though there has been no fundamental change in our business or its prospects. Further, customers may request a delay in shipping a product they have ordered due to changes in their business needs, which may delay the revenue recognition for the product until shipment occurs. This may make it difficult for investors to undertake period-to-period comparisons of our performance. Also, the fluctuating nature of key components of our revenues may limit the visibility of our management regarding performance in future periods, and make it more difficult for our management to provide guidance to our investors.
We may not have adequate facilities to satisfy future increases in demand for our products.
Our business is cyclical and in periods of a rising economy, we may experience intense demand for our products. During such periods, we may have difficulty expanding our manufacturing capacity to satisfy demand. Factors which could limit such expansion include delays in procurement of manufacturing equipment, shortages of skilled personnel, and physical constraints on expansion at our facilities. If we are unable to meet our customers’ requirements and our competitors sufficiently expand production, we could lose customers and/or market share. These losses could have an adverse effect on our financial condition and results of operations. Also, capacity that we add during upturns in the business cycle may result in excess capacity during periods when demand for our products recedes, resulting in inefficient use of capital, adversely affecting our business.
The nature of the market for our products may render them particularly susceptible to downturns in the economic environment.
Our products are designed to replace and provide superior functionality over existing product infrastructure utilized by our customers. Often, it is only after introductory demonstrations by our sales and engineering teams that our customers come to appreciate the advantages of our products and systems, and the long-term benefits of their adoption. An economic downturn or extended period of economic uncertainty may make customers less receptive to adopting new technological solutions at our suggestion - even ones with demonstrated operational and financial advantages. During these periods, customers may defer, or even cancel, orders for products and systems for which they have previously contracted, or given indications of interest.
Also, because our business is concentrated largely in the industrial sector, we do not benefit from countervailing fluctuations in consumer demand. As a result, our business may be more significantly affected by the consequences of a general economic slowdown than other segments of our industry, and may also take longer to recover from the effects of a slowdown.
- 16 -
Our backlog is subject to customer cancellation.
Many of the orders that comprise our backlog may be canceled by our customers without penalty. Our customers, particularly for our foil technology products, often cancel orders when business is weak and inventories are excessive, a situation that we have previously experienced during periods of economic slowdown. Therefore, we cannot be certain that the amount of our backlog accurately forecasts the level of orders that will ultimately be delivered. Our results of operations could be adversely impacted if customers cancel a material portion of orders in our backlog.
The complexity of our sophisticated measurement systems may require costly corrections if design flaws are found.
Our measurement systems combine sophisticated electronic hardware and computer software. We believe that the sophistication of our systems contributes to their competitive advantage over similar products offered by other system integrators. We go to substantial lengths to assure that our systems are free of design flaws when they are delivered to our customers for installation and testing. However, due to the systems’ complexity, design flaws may occur and require correction. If the requisite corrections are substantial, or difficult to implement due to the systems’ complexity, we may not be able to recover the costs of correction and retesting, with the result that our profit margins on these systems could be substantially reduced, or even negated by losses, and our results of operations could be materially and adversely affected.
Our results are sensitive to raw material availability, quality, and cost.
Although most materials incorporated in our products are available from a number of sources, certain materials are available only from a relatively limited number of suppliers. We generally maintain a supply of strategic raw materials for continuity and risk management. Our customers would need significant advance notification to qualify alternative materials, if we had to use them. Alternative suppliers are available worldwide for most of our raw materials, but significant time (up to 12 months) would be required to qualify new suppliers and establish efficient production scheduling.
Certain metals used in the manufacture of our products are traded on active markets, and can be subject to significant price volatility.
Our results of operations may be materially and adversely affected if we have difficulty obtaining certain raw materials, if the quality of available raw materials deteriorates, if there are significant price changes for these raw materials, or if compliance with the laws and regulations described below proves costly and time-consuming. For periods in which the prices of these raw materials are rising, we may be unable to pass on the increased cost to our customers, which would result in decreased margins for the products in which they are used. For periods in which the prices are declining, we may be required to write down our inventory carrying cost of these raw materials, since we record our inventory at the lower of cost or market. Depending on the extent of the difference between market price and our carrying cost, this write-down could have a material adverse effect on our net earnings. We also may need to record losses for adverse purchase commitments for these materials in periods of declining prices.
Pursuant to the SEC’s “conflict minerals” rules, reporting companies that determine that certain metals, dubbed “conflict minerals” by the SEC (which include tantalum, gold, tin, and tungsten sourced from the Democratic Republic of the Congo or adjoining countries), are necessary to the functionality or production of a product they manufacture, or contract to have manufactured, must file a specialized disclosure form with the SEC. We use raw materials that are subject to conflict minerals rules. The compliance with the SEC's related disclosure requirements may affect the sourcing and availability of minerals used in the manufacture of our products. Also, because our supply chain is complex, we may face reputational challenges with our customers and other stakeholders if we are unable to materially verify the origins of all "in scope" metals used in our products.
Our product sales may be adversely affected by changes in product classification levels under various qualification and specification standards.
Certain of our products must be qualified or approved under various military and aerospace specifications and other standards. We have qualified certain of our foil resistor products under various military specifications approved and monitored by the DLA, and under certain European military specifications, and various aerospace standards approved by NASA and the ESA. Qualification and specification levels are based in part upon product failure rate. We must continuously perform tests on our products, and for products that are qualified, the results of these tests must be reported to the qualifying organization. Certain of our force sensor products are approved by the NTEP and OIML. Our on-board weighing systems must meet approved standards to make them legal-for-trade. If a product fails to meet the requirements for the applicable classification level or other approval, the product’s classification or approval may be suspended or reduced to a lower level. During the time that the classification is suspended or reduced to a lower level, net revenues and earnings attributable to that product may be adversely affected.
Failure to maintain effective internal control over financial reporting could adversely affect our ability to meet our reporting requirements.
- 17 -
Effective internal control over financial reporting is necessary for us to provide reasonable assurance with respect to our financial reports, and to effectively prevent fraud. Internal control over financial reporting may not prevent or detect misstatements because of inherent limitations, including the possibility of human error, the circumvention or overriding of controls, or fraud. Therefore, even effective internal control over financial reporting can provide only reasonable assurance with respect to the preparation and fair presentation of financial statements. If we cannot provide reasonable assurance with respect to our financial reports and effectively prevent fraud, our operating results could be harmed.
Future changes in our environmental liability and compliance obligations may harm our ability to operate or increase costs.
Our manufacturing operations, products and/or packaging are subject to environmental laws and regulations governing air emissions, wastewater discharges, the handling, disposal, and remediation of hazardous substances, wastes, and certain chemicals used or generated in our manufacturing processes, workplace health and safety labeling, or other notifications with respect to the content, or other aspects of our processes, products or packaging, restrictions on the use of certain materials in or on design aspects of our products or packaging, and responsibility for disposal of products or packaging. New liabilities could arise, and we may have unavoidably inherited certain pre-existing environmental liabilities, generally based on successor liability doctrines. Although we have never been involved in any environmental matter that has had a material adverse impact on our overall operations, there can be no assurance that in connection with any past or future operation, acquisition or otherwise, we will not be obligated to address environmental matters that could have a material adverse impact on our operations. In addition, more stringent environmental regulations may be enacted in the future, and we cannot presently determine the modifications, if any, in our operations that any such future regulations might require, or the cost of compliance with these regulations.
Our credit facilities subject us to financial and operating restrictions.
We maintain a revolving credit facility with banks that we use, or may use, for working capital, acquisition financing, and other purposes. This credit facility subjects us to certain restrictions which may affect, and in some cases significantly limit or prohibit, among other things, our ability to:
•borrow additional funds;
•pay dividends or make other distributions;
•repurchase our common stock;
•make investments, including capital expenditures;
•engage in transactions with affiliates or subsidiaries; or
•create liens on our assets.
Our credit facility requires us to maintain certain financial ratios. If we fail to comply with the covenant restrictions contained in the credit facility, that failure could result in termination of the facility, and all amounts outstanding could become immediately payable.
A significant portion of our cash and cash equivalents and short-term investments balances are held by our non-U.S. subsidiaries.
We generate a significant amount of cash and profits from our non-U.S. subsidiaries. As of December 31, 2021, 87%.of our cash and cash equivalents and short-term investments were held by subsidiaries outside of the United States. Any repatriation of such funds could incur local withholding tax in the source and intervening foreign jurisdictions. These amounts could also be subject to certain U.S. state taxes.
Changes in our tax rate or exposure to additional income tax liabilities could affect our profitability. In addition, audits by tax authorities could result in additional tax payments for prior periods.
We are subject to income taxes in the U.S. and in various foreign jurisdictions. Domestic and international tax liabilities are subject to the allocation of income among various tax jurisdictions. Our effective tax rate can be affected by changes in the mix of earnings in countries with differing statutory tax rates (including as a result of business acquisitions and dispositions), changes in the valuation of deferred tax assets and liabilities, accruals related to contingent tax liabilities, the results of audits and examinations of previously filed tax returns, and changes in tax laws.
Any of these factors may adversely affect our tax rate and decrease our profitability. The amount of income taxes we pay is subject to audit by U.S. federal, state, local, and foreign tax authorities. If these tax audits result in assessments, our future results may be unfavorably impacted.
As a global business, we have a complex tax structure, and there is a risk that the tax authorities will disagree with our transfer pricing.
We are subject to complex transfer pricing regulations in the U.S. and foreign countries in which we operate. Transfer pricing regulations generally require that transactions between related companies be determined comparable to transactions on an arm’s
- 18 -
length basis and that contemporaneous documentation be maintained to support the pricing used. Although transfer pricing standards are generally similar in many of the countries in which we operate, there is still a relatively high degree of uncertainty and inherent subjectivity in complying with these requirements. This topic has received additional scrutiny in recent years, including the Organization for Economic Co-operation and Development’s Base Erosion and Profit Shifting project. To the extent that any tax authority disagrees with our transfer pricing practices, we could incur significant costs to defend our position and could be subject to significant additional tax liabilities, interest, and penalties.
We may not be able to realize our deferred tax assets which would adversely impact tax expense in future periods.
We regularly assess the ability to realize deferred tax assets in each jurisdiction in which we operate based on a number of factors, including historic operating results, estimates of future earnings, the economic environment, the nature and character of the income, and the existence of cost effective tax planning strategies. This assessment requires significant judgment. If we determine that deferred tax assets are not "more likely than not" to be realized, we record a valuation allowance to reduce deferred tax assets to a level that is expected to be realized. If we subsequently determine that realization becomes "more likely than not", a valuation allowance will be reversed. Any increase or decrease in our valuation allowances could have a significant impact on our financial results.
We use the markVishayunder license from Vishay Intertechnology, which could result in product and market confusion.
We use the mark Vishay as part of our name and in connection with many of our products. Our use of the Vishay mark is governed by an agreement between us and Vishay Intertechnology, giving us a perpetual, royalty-free, worldwide license for the use of the mark. We believe that it is important that we continue the use of the Vishay name, to a certain extent, in order to benefit from the reputation of the Vishay brand, which was first used in connection with our foil resistors and strain gages when Vishay Intertechnology was founded over 50 years ago.
There are risks associated with our use of the Vishay mark, however, both for us and for Vishay Intertechnology. Because both we, and Vishay Intertechnology, use the Vishay mark, confusion could arise in the market regarding the products offered by the two companies, and there could be a misplaced perception of our continuing to be associated with Vishay Intertechnology. Also, any negative publicity associated with one of the two companies in the future could adversely affect the public image of the other. Finally, Vishay Intertechnology will have the right to terminate the license agreement, in certain extreme circumstances, if we are in material and repeated breach of the terms of the agreement, which would likely have an adverse effect on us and our business.
Risks relating to our operations outside the United States
We attempt to improve profitability by operating in countries in which manufacturing efficiencies may be achieved, but the shift of operations to these regions may entail considerable expense.
Our strategy is aimed at achieving significant production cost savings through the transfer and expansion of manufacturing operations to and in countries in which we have existing capacity, as well as countries with lower production costs or other benefits, such as India. During this process, we may experience under-utilization of certain plants and factories in higher-cost regions, and capacity constraints in plants and factories located in lower-cost regions. Also, we may experience delays in the expected transition from a higher-cost location to a lower-cost one that results in greater than expected use of the higher-cost facility. This transitional utilization may result initially in production inefficiencies and higher costs. These costs include those associated with compensation in connection with workforce reductions and plant closings in the higher-cost regions, start-up expenses, manufacturing and construction delays, and increased depreciation costs in connection with the initiation or expansion of production in lower-cost regions. In addition, as we implement transfers of certain of our operations, we may experience strikes or other types of labor unrest as a result of layoffs or termination of our employees in higher-cost countries.
In connection with the transfer of manufacturing operations to lower-cost countries, and upgrading of existing facilities in higher-cost countries, we are also increasing the level of automation in our plants to optimize our capital and labor resources in production, inventory management, quality control, and warehousing. Although we have substantial experience with automation in several of our plants in higher-cost countries, there are risks in automating plants which previously did not use a significant amount of automation, including the possibility of inefficiencies and higher operating costs in the transition from manual to automated operations. If the transition extends longer than anticipated, we could suffer product yield inefficiencies, contributing to higher product costs and increasing the time it will take for us to achieve a return on our investment in the capital equipment involved in the automation process. Furthermore, any layoffs or termination of our employees as a result of increased automation may lead to strikes or other types of labor unrest. If we experience these types of inefficiencies, they could have an adverse effect on our operating results, customer relationships, and financial condition.
We conduct a significant amount of business in the European Union, including in England, and our operations may be affected by the departure of the United Kingdom from the European Union.
- 19 -
On June 23, 2016, the citizens of the United Kingdom approved a referendum to leave the European Union (“Brexit”), which led to significant market volatility around the world, as well as political, economic and legal uncertainty. In addition, the Brexit vote triggered a devaluing of the pound sterling relative to the euro and the U.S. dollar, and in Europe we generally sell our products and incur expense in local currencies including the pound sterling and the euro, but incur exchange rate gains and losses for U.S. dollar denominated assets and liabilities including intercompany and third-party accounts receivables and payables. This exposure to movements in foreign currency exchange rates relative to some of these U.S. dollar denominated balances may result in an adverse impact on our results of operations.
The long-term nature of the United Kingdom’s relationship with the European Union is unclear and there is considerable uncertainty when any relationship will be agreed and established. At this stage, it is uncertain what the effects of Brexit will be on our United Kingdom and European operations in fiscal 2022 and beyond, and it is possible that Brexit could impair our ability to transact business in the United Kingdom or countries in the European Union.
Significant developments from the recent and potential changes in tariffs, trade regulation or other restrictions may adversely impact our business, financial condition and results of operations.
We have manufacturing operations in China, Europe, Canada, Israel and the United States, as well as in other countries. Significant tariffs or other restrictions which are placed on Chinese, European, Canadian or Israeli imports to the United States, or any related counter-measures which are taken by the countries involved, may materially harm our revenues and results of operations. Examples of past actions are Section 232 tariffs on steel and aluminum product imports announced by the U.S. Department of Commerce in March 2018, and Section 301 tariffs on certain products that originate in China announced by the United States Trade Representative that first started in June 2018 and now are in four separate lists with varying tariff increases.
These tariffs, or other changes in U.S. trade policy, could trigger retaliatory actions by affected countries. Certain foreign governments have instituted or are considering imposing trade sanctions on certain U.S. goods. We cannot predict future trade policy or the terms of any renegotiated trade agreements and their impacts on our business. The adoption and expansion of trade restrictions, the occurrence of a trade war, or other governmental actions related to tariffs, quotas, duties, taxes or trade agreements or policies has the potential to adversely impact demand for our products, our costs, our customers, and our suppliers, which in turn could adversely impact our business, financial condition and results of operations.
We are subject to the risks of political, economic, health, and military instability in countries outside the United States in which we operate.
Some of our products are produced in Israel, India, China, and other countries which are particularly subject to risks of political, economic, health and military instability. This instability could result in wars, riots, nationalization of industry, currency fluctuations, and labor unrest or unavailability. These conditions could have an adverse impact on our ability to manufacture, ship and operate in these regions and, depending on the extent and severity of these conditions, could result in a reduction in customer orders and sales to certain regions and end-markets and materially and adversely affect our overall financial condition and operating results.
We have principal manufacturing facilities and operations located in Israel. Accordingly, our business will be directly influenced by the political, economic and military conditions affecting Israel at any given time. Since the establishment of the State of Israel in 1948, a number of armed conflicts have occurred between Israel and its neighboring countries. We have never experienced any material interruption in our operations attributable to these factors, in spite of several Middle East crises, including wars. A change in the security and political situation in Israel and in the economy could have a material adverse effect on our business, operating results and financial condition.
We are subject to foreign currency exchange rate risks which may impact our results of operations.
We are exposed to foreign currency exchange rate risks, particularly due to market values of transactions in currencies other than the functional currencies of certain subsidiaries.
Our significant foreign subsidiaries are located in the United Kingdom, Canada, Germany, Israel, Japan, and India. Our operations in Europe, Canada and certain locations in Asia primarily generate and expend cash in local currencies. Our operations in Israel and certain locations in Asia primarily generate cash in U.S. dollars, but these subsidiaries also have significant transactions in local currencies. Our exposure to foreign currency exchange rate risk is more pronounced in situations such as our operations in Canada, India, Israel, and China - where costs, such as production labor costs are predominantly paid in local currencies while the sales revenue for those products is predominantly denominated in U.S. dollars.
As of December 31, 2021, we did not have in place any arrangements to mitigate or hedge against exposures relating to fluctuations in foreign currency exchange rate.
- 20 -
A change in the mix of the currencies in which we transact our business could have a material effect on results of operations. Furthermore, the timing of cash receipts and disbursements could have a material effect on our results of operations, particularly if there are significant changes in exchange rates in a short period of time.
Our global operations are subject to extensive anti-corruption laws and other regulations.
The U.S. Foreign Corrupt Practices and similar foreign anti-corruption laws generally prohibit companies and their intermediaries from making improper payments or providing anything of value to improperly influence foreign government officials for the purpose of obtaining or retaining business, or obtaining an unfair advantage. Recent years have seen a substantial increase in the global enforcement of anti-corruption laws. Our continued operation and expansion outside the United States, including in developing countries, could increase the risk of such violations under other regulations relating to limitations on or licenses required for sales made to customers located in certain countries. Violations of these laws may result in severe criminal or civil sanctions, could disrupt our business, and result in a material adverse effect on our reputation, business and results of operations or financial condition.
Risks Relating to Our Common Stock
The holders of Class B convertible common stock have effective voting control of our company.
We have two classes of common stock: common stock and Class B convertible common stock. The holders of common stock are entitled to one vote for each share held, while the holders of Class B convertible common stock are entitled to 10 votes for each share held. The ownership of Class B convertible common stock is highly concentrated, and holders of Class B convertible common stock effectively can cause the election of directors and the approval or disapproval of other matters requiring stockholder approval. Mrs. Ruta Zandman, the wife of the late founder of our technology, Dr. Felix Zandman, controls the voting of, solely or on a shared basis with Marc Zandman (the Chairman of our Board of Directors) and Ziv Shoshani (our Chief Executive Officer and a member of our Board of Directors), approximately 76.9% of our Class B convertible common stock, representing 34.5% of the total voting power of our capital stock as of December 31, 2021. Holders of our Class B convertible common stock may act in ways that are contrary to, or not in the best interests of, holders of our common stock. The voting rights of the holders of our Class B convertible common stock effectively give such holders the ability to prevent transactions that would result in a change in control of us, including transactions in which holders of our common stock might otherwise receive a premium for their shares over the then-current market price.
Certain provisions of our certificate of incorporation and bylaws may reduce the likelihood of any unsolicited acquisition proposal or potential change of control that you might consider favorable.
Our bylaws contain provisions that could be considered “anti-takeover” provisions because they make it harder for a third party to acquire us without the consent of our incumbent board of directors. Under these by-law provisions:
•stockholders may not change the size of the board of directors or, except in limited circumstances, fill vacancies on the board of directors;
•stockholders may not call special meetings of stockholders;
•stockholders must comply with advance notice provisions for nominating directors or presenting other proposals at stockholder meetings; and
•our Board of Directors, may without stockholder approval, issue preferred shares and determine their rights and terms, including voting rights, or adopt a stockholder rights plan.
These provisions could have the effect of discouraging an unsolicited acquisition proposal or delaying, deferring, or preventing a change of control transaction that might involve a premium price or otherwise be considered favorable by our stockholders.
General Risk Factors
We might require additional capital to support business growth and this capital might not be available.
We intend to continue to make investments to support our business growth and may require additional funds to respond to business challenges or opportunities, including the need to develop new offerings or enhance our existing offerings, enhance our operating infrastructure, or acquire complementary businesses and technologies. Accordingly, we may need to engage in equity or debt financings to secure additional funds. If we raise additional funds through further issuances of equity or convertible debt securities, our existing stockholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences, and privileges superior to those of holders of our common stock. Any debt financing secured by us in the future could involve additional restrictive covenants relating to our capital raising activities and other financial and operational matters, which may make it more difficult for us to obtain additional capital and to pursue business opportunities, including potential acquisitions.
- 21 -
In addition, we may not be able to obtain additional financing on terms favorable to us, if at all. If we are unable to obtain adequate financing or financing on terms satisfactory to us, when we require it, our ability to continue to support our business growth and to respond to business challenges could be significantly limited.
Our future success is substantially dependent on our ability to attract and retain highly qualified technical, managerial, marketing, finance, and administrative personnel.
The competitive environment of our business requires us to attract and retain highly qualified personnel to develop technological innovations and bring them to market on a timely basis. Our complex operations also require us to attract and retain highly qualified administrative personnel in functions such as legal, tax, accounting, business development, financial reporting, and treasury. The market for personnel with such qualifications is highly competitive. We have not entered into employment or non-competition agreements with many of our key personnel.
The loss of the services of, or the failure to effectively recruit, qualified personnel, including for key executive positions, could have a material adverse effect on our business.
We are exposed to, and may be adversely affected by, interruptions to our computer and information technology systems and sophisticated cyber-attacks.
We rely on our information technology systems and networks in connection with many of our business activities. Some of these networks and systems are managed by third party service providers and are not under our direct control. Our operations routinely involve receiving, storing, processing, and transmitting sensitive information pertaining to our business, customers, suppliers, employees, and other sensitive matters. Any cyber incidents could materially disrupt operational systems; result in loss of trade secrets or other proprietary or competitively sensitive information; compromise personally identifiable information regarding customers or employees; and jeopardize the security of our facilities. Because techniques used to obtain unauthorized access, or to sabotage systems, change frequently and generally are not recognized until they are launched against a target, we may be unable to anticipate these techniques, or to implement adequate preventative measures. Information technology security threats, including security breaches, computer malware, and other cyber-attacks are increasing in both frequency and sophistication, and could create financial liability, subject us to legal or regulatory sanctions, or damage our reputation with customers, suppliers, and other stakeholders. We continuously seek to maintain a robust program of information security and controls, but the impact of a material information technology event could have a material adverse effect on our competitive position, reputation, results of operations, financial condition, and cash flows.
Interruptions in our information technology systems could adversely affect our business.
We rely on the efficient and uninterrupted operation of complex information technology systems and networks to operate our business. Any significant system or network disruption, including, but not limited to, new system implementations, computer viruses, security breaches, facility issues or energy blackouts could have a material adverse impact on our operations and results of operations. Such network disruption could result in a loss of the confidentiality of our intellectual property or the release of sensitive competitive information or customer or employee personal data. Any loss of such information could harm our competitive position, result in a loss of customer confidence, and cause us to incur significant costs to remedy the damages caused by the disruptions or security breaches. We have implemented protective measures to prevent against and limit the effects of system or network disruptions, but there can be no assurance that such measures will be sufficient to prevent or limit the damage from any future disruptions and any such disruption could have a material adverse impact on our business and results of operations.
Third-party service providers, such as subcontractors, distributors and vendors have access to certain portions of our sensitive data. In the event that these service providers do not properly safeguard our data that they hold, security breaches and loss of our data could result. Any such loss of data by our third-party service providers could have a material adverse impact on our business and results of operations.
Unexpected events, such as a natural disaster, could disrupt our operations and adversely affect our results of operations.
We have manufacturing and other facilities in countries around the world. Unexpected events, including fires or explosions at facilities; natural disasters, such as flooding, hurricanes, and earthquakes; war or terrorist activities; civil unrest; unplanned outages; supply or labor disruptions; and failures of equipment or systems at any of our facilities could adversely affect our results of operation. If adverse conditions were to arise with respect to any of our facilities as a result of a natural disaster or other unexpected event, they may result in customer disruption, physical damage to one or more key operating facilities, the temporary closure of one or more key operating facilities, the temporary disruptions of information systems, and/or an adverse effect on our results of operations.
Our stock price could become more volatile and investments could lose value.
- 22 -
The market price of our common stock, and the number of shares traded each day, has experienced significant fluctuations and may continue to fluctuate significantly. The market price for our common stock may be affected by a number of factors, including, but not limited to:
•shortfalls in our expected net revenue, earnings or key performance metrics;
•changes in recommendations or estimates by securities analysts;
•the announcement of new products by us or our competitors;
•quarterly variations in our or our competitors’ results of operations;
•a change in our dividend or stock repurchase activities;
•developments in our industry or changes in the market for technology stocks;
•changes in rules or regulations applicable to our business; and
•other factors, including economic instability, COVID-19, labor shortages, supply chain disruptions and changes in political or market conditions.
A significant drop in our stock price could expose us to costly and time consuming litigation, which could result in substantial costs, and divert management’s attention and resources, resulting in an adverse effect on our business.
Also, given our market capitalization and trading volume fluctuations, it is possible that there will be less market and institutional interest in our shares, and that we will not attract substantial coverage in the analyst community. As a result, the trading market for our shares may be less liquid, making it more difficult for investors to dispose of their shares at favorable prices, and investors may have less independent information and analysis available to them concerning our company.
Your percentage ownership of our common stock may be diluted in the future.
Your percentage ownership of our common stock may be diluted in the future because of equity awards that we expect will be granted to our directors, officers, and employees. The Vishay Precision Group, Inc. 2010 Stock Incentive Program, as may be amended from time to time, provides for the grant of equity-based awards, including restricted stock, restricted stock units, stock options, and other equity-based awards to our directors, officers, and other employees, advisors and consultants.
- 23 -
Item 1B.UNRESOLVED STAFF COMMENTS
None.
Item 2.PROPERTIES
Our business has approximately 20 principal locations. Our facilities include owned locations and locations leased from third parties. The principal locations, along with available space including administrative offices, are listed below:
Reporting segment Approx. Available Space (square feet)
Owned Locations
Wendell, North Carolina USA Sensors 147,000
Chennai, India (a) Weighing Solutions 129,000
Holon, Israel Sensors 97,000
Bradford, United Kingdom Weighing Solutions 75,000
Kent, Washington Weighing Solutions 47,000
Akita, Japan (b) Sensors 46,000
Poestenkill, New York Measurement Systems 32,000
Chartres, France Weighing Solutions 11,000
Basingstoke, United Kingdom Weighing Solutions/Sensors 11,000
Third-Party Leased Locations
Modi'in, Israel Sensors 121,400
Toronto, Canada Measurement Systems 65,000
Seal Beach, California Measurement Systems 49,000
Tianjin, People’s Republic of China Weighing Solutions 34,000
Omer, Israel Sensors 24,000
Holon, Israel Sensors 18,000
Concord, California USA Measurement Systems 16,000
Taipei, Republic of China (Taiwan) Weighing Solutions/Measurement Systems 13,000
Teltow, Germany Sensors 11,000
Degerfors, Sweden Measurement Systems 10,000
Malvern, Pennsylvania USA Corporate 8,000
(a)The Chennai building is owned and the land is held under a 99 year lease (which began in 2012).
(b)A facility on the campus is leased to Vishay Intertechnology. Approximate available space reported above excludes the area leased.
In the opinion of management, our properties and equipment generally are in good operating condition and are adequate for our present needs. We do not anticipate difficulty in renewing leases as they expire, or in finding alternative facilities.
Our corporate headquarters are located at 3 Great Valley Parkway, Suite 150, Malvern, PA 19355.
Item 3.LEGAL PROCEEDINGS
We are subject to various legal proceedings that constitute ordinary, routine litigation incidental to our business. In our opinion, the disposition of these proceedings will not have a material adverse effect on our business or our financial condition, results of operations, and cash flows.
Item 4.MINE SAFETY DISCLOSURES
Not applicable.
- 24 -
PART II
Item 5.MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS, AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is listed on the New York Stock Exchange under the symbol VPG. The Board of Directors may only declare dividends or other distributions with respect to the common stock or the Class B convertible common stock if it grants such dividends or distributions in the same amount, per share, with respect to the other class of stock. Stock dividends or distributions, on any class of stock, are payable only in shares of stock of that class. Shares of either common stock or Class B convertible common stock cannot be split, divided, or combined unless the other is also split, divided, or combined equally. Holders of record of our common stock totaled approximately 688 at March 4, 2022.
We have two classes of common stock: common stock and Class B convertible common stock. The holders of common stock are entitled to one vote for each share held, while the holders of Class B convertible common stock are entitled to 10 votes for each share held. At March 4, 2022 we had outstanding 1,022,887 shares of Class B convertible common stock, par value $0.10 per share. Currently, the holders of VPG’s Class B convertible common stock hold approximately 45.0% of the voting power of our Company. Mrs. Ruta Zandman, the wife of the late founder of our technology, Dr. Felix Zandman, controls the voting of, solely or on a shared basis with Marc Zandman (the Chairman of our Board of Directors) and Ziv Shoshani ( our Chief Executive Officer and a member of our Board of Directors), approximately 76.9% of our Class B convertible common stock, representing 34.5% of the total voting power of our capital stock as of December 31, 2021.
- 25 -
Stock Performance Graph
The graph and table below compare the cumulative total stockholder return on the Company’s common stock over a sixty month period, with the returns on the Russell 2000 Stock Index, and a peer group of companies selected by our management. In 2021, the Company updated its listing of peer group companies. The new peer group is made up of eight publicly held manufacturers of sensors, sensor-based equipment, and sensor-based systems. Management believes that the product offerings of the new peer group companies are more similar to our product offerings than those of the companies contained in any published industry index. The return of each new peer issuer has been weighted according to the respective issuer’s stock market capitalization. The graph and table assume that $100 had been invested at December 31, 2016, and that all dividends were reinvested. The graph and table are not necessarily indicative of future investment performance.
*The management selected peer group beginning in 2021 includes: CTS Corp., Luna Innovations Inc., inTEST Corporation, Kyowa, Spectris plc, TT Electronics, FARO Technologies Inc., ESCO Technologies Inc.
** Management's former peer group included: MTS Systems, Kyowa Electronic Instruments, Mettler – Toledo, Spectris, Sensata Technologies, CTS Corp
Item 6. [Reserved]
- 26 -
Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Overview
VPG is a global, diversified company focused on precision measurement sensing technologies, including specialized sensors, weighing solutions, and measurement systems. Many of our precision measurement sensing products and solutions are “designed-in” by our customers, and address growing applications across a diverse array of industries and markets. Our products are marketed under a variety of brand names that we believe are characterized as having a very high level of precision and quality, and we employ an operationally diversified structure to manage our businesses.
Driven by the continued proliferation of data generated by the expanding use of sensors across a widening array of industrial and non-industrial applications, precision measurement technologies help ensure and deliver required levels of quality of mission-critical or high-value data. Over the past few years, we have seen a broadening of precision sensing applications in both our traditional industrial markets and new markets, due to the development of higher functionality in our customers' end products. Our precision measurement solutions are used across a wide variety of end markets upon which we focus, including industrial, test and measurement, transportation, steel, medical, agriculture, avionics, military and space, and consumer product applications. The Company has a long heritage of innovation in sensor technologies that provide accuracy, reliability and repeatability that make our customers' products safer, smarter, and more productive. As the functionality of customers products increases, and they integrate more precision measurement sensors and related systems into their solutions in order to link the mechanical and physical world with digital control and/or response, we believe this will offer substantial growth opportunities for our products and expertise.
Impact of COVID-19 on our Business
As of March 4, 2022, all of the Company’s facilities are operating without limitations with the Company implementing COVID-19 best practices with respect to working conditions and enabling some employees to work remotely where possible. Nonetheless, given the impacts to date and the ongoing uncertainty concerning the magnitude of the impact and duration of the COVID-19 pandemic, the ongoing economic disruption may adversely affect the Company’s business and financial results in future periods.
Overview of Financial Results
In the fourth quarter of fiscal 2021, we formally adopted an operationally diversified structure and strategy, through which each of VPG's business segments maintains and deploys distinct go-to-market strategies, technical expertise, capital requirements, and acquisition opportunities. We use an operationally diversified strategy and structure to be close to our customers and to leverage our high-level engineering expertise to optimize and enhance the performance of our customers' solutions. We seek to maximize the performance and value of our businesses by leveraging our accumulated experience, methodologies, and expertise in driving operational excellence across our functional areas, as well as in the allocation of capital and investment.
VPG reports in three product segments: Sensors segment, Weighing Solutions segment, and Measurement Systems segment. The Sensors reporting segment is comprised of the foil resistor and strain gage operating segments. The Weighing Solutions segment is comprised of specialized modules and systems used to precisely measure weight, force torque, and pressure. The Measurement Systems reporting segment is comprised of highly specialized systems for steel production, materials development, and safety testing.
Net revenues for the year ended December 31, 2021 were $317.9 million compared to net revenues of $269.8 million for the year ended December 31, 2020. Net earnings attributable to VPG stockholders for the year ended December 31, 2021 were $20.2 million, or $1.48 per diluted share, compared to $10.8 million, or $0.79 per diluted share, for the year ended December 31, 2020.
The results of operations for the years ended December 31, 2021 and 2020 include items affecting comparability as listed in the reconciliations below. The reconciliations below include certain financial measures which are not recognized in accordance with U.S. generally accepted accounting principles ("GAAP"), including adjusted gross profits, adjusted gross profit margin, adjusted operating income, adjusted operating margin, adjusted net earnings, adjusted net earnings per diluted share, EBITDA, and adjusted EBITDA. These non-GAAP measures should not be viewed as an alternative to GAAP measures of performance. Non-GAAP measures such as adjusted gross profits, adjusted gross profit margin, adjusted operating income, adjusted operating margin, adjusted net earnings, adjusted net earnings per diluted share, EBITDA, and adjusted EBITDA do not have uniform definitions. These measures, as calculated by VPG, may not be comparable to similarly titled measures used by other companies. Management believes that these non-GAAP measures are useful to investors because each presents what management views as our core operating results for the relevant period. The adjustments to the applicable GAAP measures relate to occurrences or events that are outside of our core operations, and management believes that the use of these non-
- 27 -
GAAP measures provides a consistent basis to evaluate our operating profitability and performance trends across comparable periods. In addition, the Company has historically provided these or similar non-GAAP measures and understands that some investors and financial analysts find this information helpful in analyzing the Company’s performance and in comparing the Company’s financial performance to that of its peer companies and competitors. Management believes that the Company’s non-GAAP measures are regarded as supplemental to its GAAP financial results.
The items affecting comparability are (dollars in thousands, except per share amounts):
As reported - GAAP Margins 39.4 % 38.6 % 8.6 % 8.4 %
As Adjusted - Non GAAP Margins 41.2 % 39.0 % 11.1 % 9.7 %
Year ended
Net earnings attributable to VPG stockholders $ 20,221 $ 10,787
Impairment of goodwill and indefinite-lived intangibles 1,223 2,440
Acquisition purchase accounting adjustments (a) 2,775 569
Acquisition costs (b) 1,198 —
Restructuring costs 76 918
Start-up costs (d) 3,174 —
ADJUSTED EBITDA MARGIN 15.7 % 14.1 %
(a) Acquisition purchase accounting adjustments include fair market value adjustments associated with inventory recorded as a component of costs of products sold.
(b) Acquisition costs associated with the acquisition of DTS in 2021.
(c) COVID-19 impact is the net impact to the Company of costs incurred as a result of the COVID-19 pandemic, net of government subsidies received.
(d) Start-up costs in 2021 are associated with the ramp up of our new manufacturing facility in Israel.
(e) Impact of foreign currency exchange rates on assets and liabilities. In 2020, the change in the dollar-shekel exchange rate, particularly in the fourth quarter of 2020, resulted in an unfavorable foreign exchange impact primarily related to the shekel-denominated lease liability for a new facility in Israel.
(f) Included in the discrete items for 2021 is a $1.6 million tax benefit related to the acquisition of DTS and in 2020 is a $1.7 million tax expense related to the acquisition of DSI.
- 28 -
Financial Metrics
We utilize several financial measures and metrics to evaluate the performance and assess the future direction of our business. These key financial measures and metrics include net revenues, gross profit margin, end-of-period backlog, book-to-bill ratio, and inventory turnover.
Gross profit margin is gross profit shown as a percentage of net revenues. Gross profit is generally net revenues less costs of products sold, but could also include certain other period costs. Gross profit margin is clearly a function of net revenues, but also reflects our cost-cutting programs and our ability to contain fixed costs.
End-of-period backlog is one indicator of potential future sales. We include in our backlog only open orders that have been released by the customer for shipment in the next twelve months. If demand falls below customers’ forecasts, or if customers do not control their inventory effectively, they may cancel or reschedule the shipments that are included in our backlog, in many instances without the payment of any penalty. Therefore, the backlog is not necessarily indicative of the results to be expected for future periods.
Another important indicator of demand in our industry is the book-to-bill ratio, which is the ratio of the amount of product ordered during a period compared with the product that we ship during that period. A book-to-bill ratio that is greater than one indicates that demand is higher than current revenues and manufacturing capacities, and it indicates that we may generate increasing revenues in future periods. Conversely, a book-to-bill ratio that is less than one is an indicator of lower demand compared to existing revenues and current capacities and may foretell declining sales.
We focus on our inventory turnover as a measure of how well we are managing our inventory. We define inventory turnover for a financial reporting period as our costs of products sold for the four fiscal quarters ending on the last day of the reporting period divided by our average inventory (computed using each quarter-end balance) for this same period. A higher level of inventory turnover reflects more efficient use of our capital.
The quarter-to-quarter trends in these financial metrics can also be an important indicator of the likely direction of our business. The following table shows net revenues, gross profit margin, the end-of-period backlog, the book-to-bill ratio, and the inventory turnover for our business as a whole during the five quarters beginning with the fourth quarter of 2020 and through the fourth quarter of 2021 (dollars in thousands):
4th Quarter 1st Quarter 2nd Quarter 3rd Quarter 4th Quarter
- 29 -
4th Quarter 1st Quarter 2nd Quarter 3rd Quarter 4th Quarter
Sensors
Weighing Solutions
Measurement Systems
Net revenues for the fourth quarter of 2021 increased 9.8% from the net revenues of $82.0 million reported in the third quarter of 2021, and increased 19.3% from $75.4 million for the comparable prior year period.
Net revenues in the Sensors segment of $34.1 million in the fourth quarter of 2021 increased 11.2% from $30.7 million in the third quarter of 2021, and increased 7.1% from $31.9 million in the fourth quarter of 2020. The year over year increase in revenues was primarily attributable to an increase in our sales of precision resistors in the test and measurement and other markets, partially offset by lower sales in the avionics, military and space market. Sequentially, the increase in revenues reflected higher precision resistor sales in the test and measurement and avionics, military and space markets, and an increase mainly in our advanced sensors product line, primarily in our consumer-related markets.
Net revenues in the Weighing Solutions segment of $32.1 million in the fourth quarter of 2021 increased 4.5% compared to revenues of $30.7 million in the third quarter of 2021. The sequential increase in revenues was primarily attributable to higher sales in the process weighing product lines, partially offset by lower sales in our on-board weighing product lines. Net revenues in the fourth quarter of 2021 increased 8.5% compared to $29.5 million in the fourth quarter of 2020 mainly due to an increase in our OEM customers in the construction equipment market and an increase in our process weighing product line, partially offset by lower sales of our on-board weighing product lines.
Net revenues in the Measurement Systems segment of $23.8 million in the fourth quarter of 2021 increased 15.6% from $20.6 million in the third quarter of 2021 and increased 69.7% from $14.0 million in the fourth quarter of 2020. The sequential increase in revenue was primarily attributable to higher KELK steel related sales and DTS products. The year-over-year increase in revenues was primarily attributable to the acquisition of DTS and higher KELK and DSI steel-related sales.
The gross profit margin for the fourth quarter of 2021 decreased 0.1% compared to the third quarter of 2021, and increased 0.6% from the fourth quarter of 2020.
Sequentially, gross profit margins improved in the Sensors and Measurement Systems segments and decreased in the Weighing Solutions segment. In the Sensors segment, the increase in gross profit margin was primarily due to an increase in volume, partially offset by unfavorable foreign exchange rates, wage increases, and labor inefficiencies. In the Weighing Solutions segment, the decline in gross profit margin was primarily due to an unfavorable product mix, reduction of inventory, and higher material costs, partially offset by an increase in volume. In the Measurement Systems segment, gross profit margin increased due to higher volume, which was partially offset by unfavorable product mix and inventory reductions.
Compared to the fourth quarter of 2020, gross profit margins decreased in the Sensors segment and increased in the Weighing Solutions and Measurement Systems segments. In the Sensors segment, the decrease in gross profit margin was primarily due
- 30 -
to unfavorable foreign exchange rates, wage increases, and labor inefficiencies, partially offset by an increase in volume. In the Weighing Solutions segment, the increase in gross profit margin was primarily due to higher volume. In the Measurement Systems segment, gross profit margin increased primarily due to higher revenue coming from DTS, which was acquired on June 1, 2021.
Optimize Core Competence
The Company’s core competencies include our innovative deep technical and applications-specific expertise to add value to our customers' products, our strong brands and customer relationships, our focus on operational excellence, our ability to select and develop our management teams, and our proven M&A strategy. We continue to optimize all aspects of our development, manufacturing and sales processes, including by increasing our technical sales efforts; continuing to innovate in product performance and design; and refining our manufacturing processes.
Our Sensors segment research group developed innovations that enhance the capability and performance of our strain gages, while simultaneously reducing their size and power consumption as part of our advanced sensors product line. We believe this unique foil technology will create new markets as customers “design in” these next generation products in existing and new applications. Our development engineering team is also responsible for creating new processes to further automate manufacturing, and improve productivity and quality. Our advanced sensors manufacturing technology also offers us the capability to produce high-quality foil strain gages in a highly automated environment, which we believe results in reduced manufacturing and lead times, improved quality and increased margins. As a sign of our commitment to these businesses, we signed a long-term lease for a state-of-the-art facility that has been constructed in Israel. We fully transitioned to this facility in the third quarter of fiscal 2021.
Our design, research, and product development teams, in partnership with our marketing teams, drive our efforts to bring innovations to market. We intend to leverage our insights into customer demand to continually develop and roll out new, innovative products within our existing lines and to modify our existing core products in ways that make them more appealing, addressing changing customer needs and industry trends in terms of form, fit, and function.
We also seek to achieve significant production cost savings through the transfer, expansion, and construction of manufacturing operations in countries such as India, China, and Israel, where we can benefit from improved efficiencies or available tax and other government-sponsored incentives. In the past several years, we incurred restructuring expense related to closing and downsizing of facilities as part of the manufacturing transitions of our load cell products to facilities in India and China, which marked key milestones in our ongoing strategic initiatives to align and consolidate our manufacturing footprint.
Acquisition Strategy
We expect to continue to make strategic acquisitions where opportunities present themselves to grow and expand our segments. Historically, our growth and acquisition strategy had been largely focused on vertical product integration, using our foil strain gages in our load cell products, and incorporating those products into our weighing solutions. In recent years, we widened our acquisition strategy to include a broader set of precision measurement systems and product companies.
We expect to expand our expertise, and our acquisition focus, outside our traditional vertical approach to other precision measurement solutions, including in the fields of measurement of force, weight, pressure, torque, tilt, motion, and acceleration. We believe acquired businesses will benefit from improvements we implement to reduce redundant functions and from our current global manufacturing and distribution footprint.
Research and Development
Research and development will continue to play a key role in our efforts to introduce innovative products to generate new sales and to improve profitability. We expect to continue to expand our position as a leading supplier of precision foil technology products. We believe our R&D efforts should provide us with a variety of opportunities to leverage technology, products, and our manufacturing base in order to ultimately improve our financial performance. The amount charged to expense for research and development aggregated $17.2 million, $12.6 million, and $12.1 million for the years ended December 31, 2021, 2020, and 2019, respectively.
Cost Management
To be successful, we believe we must seek new strategies for controlling operating costs. Through automation in our plants, we believe we can optimize our capital and labor resources in production, inventory management, quality control, and warehousing. We are in the process of moving some manufacturing to more cost effective locations. This may enable us to become more efficient and cost competitive, and also maintain tighter controls of the operation.
- 31 -
Production transfers, facility consolidations, and other long-term cost-cutting measures require us to initially incur significant severance and other exit costs. We are realizing the benefits of our restructuring through lower labor costs and other operating expenses, and expect to continue reaping these benefits in future periods. However, these programs to improve our profitability also involve certain risks which could materially impact our future operating results, as further detailed in Part I, Item 1A “Risk Factors” of this Annual Report on Form 10-K.
The Company recorded restructuring costs of $0.1 million, $0.9 million, and $2.3 million during the years ended December 31, 2021, 2020, and 2019, respectively. In 2021 and 2020, restructuring costs were comprised primarily of employee termination costs, including severance and statutory retirement allowances. In 2019, restructuring costs included $1.2 million of employee termination costs, including severance and statutory retirement allowances incurred in connection with various cost reduction programs, and $1.1 million of other exit costs associated with the closure and downsizing of facilities as part of the manufacturing transitions of the Company's force sensors products to facilities in India and China.
We are evaluating plans to further reduce our costs by consolidating additional manufacturing operations. These plans may require us to incur restructuring and severance costs in future periods. While streamlining and reducing fixed overhead, we are exercising caution so that we will not negatively impact our customer service or our ability to further develop products and processes.
Foreign Currency
We are exposed to foreign currency exchange rate risks, particularly due to transactions in currencies other than the functional currencies of certain subsidiaries. U.S. GAAP requires that entities identify the “functional currency” of each of their subsidiaries and measure all elements of the financial statements in that functional currency. A subsidiary’s functional currency is the currency of the primary economic environment in which it operates. In cases where a subsidiary is relatively self-contained within a particular country, the local currency is generally deemed to be the functional currency. However, a foreign subsidiary that is a direct and integral component or extension of the parent company’s operations generally would have the parent company’s currency as its functional currency. We have subsidiaries that fall into each of these categories.
Foreign Subsidiaries which use the Local Currency as the Functional Currency
Our operations in Europe, Canada, and certain locations in Asia primarily generate and expend cash using local currencies, and accordingly, these subsidiaries utilize the local currency as their functional currency. For those subsidiaries where the local currency is the functional currency, assets and liabilities in the consolidated balance sheets have been translated at the rate of exchange as of the balance sheet date. Translation adjustments do not impact the results of operations and are reported as a separate component of equity.
For those subsidiaries where the local currency is the functional currency, revenues and expenses are translated at the average exchange rate for the year. While the translation of revenues and expenses into U.S. dollars does not directly impact the consolidated statements of operations, the translation effectively increases or decreases the U.S. dollar equivalent of revenues generated and expenses incurred in those foreign currencies.
Foreign Subsidiaries which use the U.S. Dollar as the Functional Currency
Our operations in Israel and certain locations in Asia primarily generate cash in U.S. dollars, and accordingly, these subsidiaries utilize the U.S. dollar as their functional currency. For those foreign subsidiaries where the U.S. dollar is the functional currency, all foreign currency financial statement amounts are remeasured into U.S. dollars. Exchange gains and losses arising from remeasurement of foreign currency-denominated monetary assets and liabilities are included in the results of operations. While these subsidiaries transact most business in U.S. dollars, they may have significant costs, particularly related to payroll, which are incurred in the local currency and significant lease assets and liabilities.
Effects of Foreign Exchange Rate on Operations
For the year ended December 31, 2021, exchange rate impacts increased net revenues by $5.3 million and increased costs of products sold and selling, general, and administrative expenses by $8.7 million. For the year ended December 31, 2020, exchange rate impacts increased net revenues by $0.9 million and increased costs of products sold and selling, general, and administrative expenses by $2.8 million.
Critical Accounting Policies and Estimates
Our significant accounting policies are summarized in Note 1 to our consolidated financial statements. We identify here a number of policies that entail significant judgments or estimates by management.
- 32 -
Inventories
We value our inventories at the lower of cost or market, with cost determined under the first-in, first-out method, and market based upon net realizable value. The valuation of our inventories requires management to make costing and market estimates. For work in process goods, we are required to estimate the cost to completion of the products and the prices at which we will be able to sell the products. For finished goods, we must assess the prices at which we believe the inventory can be sold. Inventories are also adjusted for estimated obsolescence and written down to net realizable value based upon estimates of future demand, technology developments, and market conditions.
Business Combinations
The Company allocates the purchase price of an acquired company, including when applicable, the fair value of contingent consideration between tangible and intangible assets acquired and liabilities assumed from the acquired businesses based on estimated fair values, with any residual of the purchase price recorded as goodwill. Third party appraisal firms and other consultants are engaged to assist management in determining the fair values of certain assets acquired and liabilities assumed. Different valuations approaches are used to value different types of intangible assets. The Company primarily uses the income approach in the valuation of intangible assets. The income approach to valuation is based on the present value of future cash flows attributable to each identifiable intangible asset. This approach to valuation requires management to make significant estimates and assumptions including but not limited to: discount rates, future cash flows and the economic lives of trade names, technology, and customer relationships. These estimates are based on historical experience and information obtained from the management of the acquired companies, and are inherently uncertain.
Goodwill and Other Indefinite-lived Intangible Assets
Goodwill and indefinite-lived trademarks are tested for impairment at least annually, and whenever events or changes in circumstances occur indicating that it is "more likely than not" impairment may have been incurred. We have the option to first assess qualitative factors to determine whether it is "more likely than not" that the fair value of a reporting unit is less than its carrying amount as a basis for determining if it is necessary to perform the quantitative goodwill impairment test. However, if we conclude otherwise, then we are required to perform the quantitative impairment test by calculating the fair value of the reporting unit and comparing it against its carrying amount.
At the beginning of 2021, we had five reporting units to which goodwill was allocated: steel, on-board weighing, instrumentation, DSI, and DTS. For the steel and on-board weighing goodwill reporting units, we performed the qualitative assessment, which included assessment of macroeconomic conditions, industry and market considerations, cost factors, overall financial performance, and other entity specific events which could impact the reporting unit. Based on this review, it was determined that the fair value of each of those reporting units was in excess of its carrying value and therefore no quantitative impairment test was required.
During the second quarter of 2021, due to updated financial projections, we performed a quantitative impairment test on our instrumentation reporting unit's goodwill and indefinite-lived intangible trade name. Based on this review, we recorded an impairment charge which eliminated that remaining goodwill associated with this reporting unit and reduced the value of the indefinite-lived trade-name.
For the DSI goodwill reporting unit, the Company performed the quantitative impairment test. In estimating the fair value of our DSI reporting unit the Company used the income approach. The income approach to valuation requires management to make significant estimates and assumptions related to future revenues, profitability, working capital requirements and selection of discount rate and long term growth rate. Changes in these estimates and assumptions could have a significant impact on the fair value of the reporting units. If the fair value exceeds the carrying value, no further evaluation is required and no impairment loss is recognized. An impairment charge would be recognized to the extent the carrying amount of goodwill exceeds the reporting unit fair value. The goodwill and indefinite-lived trade name allocated the DTS goodwill reporting unit is still provisional as of December 31, 2021 and therefore will be tested in the following year's annuals impairment test.
The indefinite-lived trade names are tested for impairment either by employing the qualitative approach outlined above, or by comparing the carrying value to the fair value based on current revenue projections of the related operations, under the relief from royalty method. Any excess carrying value over the applicable fair value is recognized as impairment. Any impairment would be recognized in the reporting period in which it has been identified.
Pension and Other Postretirement Benefits
Accounting for defined benefit pension and other postretirement plans involves numerous assumptions and estimates. The discount rate at which obligations could effectively be settled and the expected long-term rate of return on plan assets are two
- 33 -
critical assumptions in measuring the cost and benefit obligations of our pension and other postretirement benefit plans. Other important assumptions include the anticipated rate of future increases in compensation levels, estimated mortality, and for postretirement medical plans, increases or trends in health care costs. Management reviews these assumptions at least annually. We use independent actuaries to assist us in formulating assumptions and making estimates. These assumptions are updated periodically to reflect the actual experience and expectations on a plan-specific basis, as appropriate.
Our defined benefit plans are concentrated in the United States, Japan and the United Kingdom. Plans in these countries comprise approximately 88% of our retirement obligations at December 31, 2021. We utilize published long-term high-quality bond indices to determine the discount rate at the measurement date. We utilize bond yields at various maturity dates to reflect the timing of expected future benefit payments. We believe the discount rates selected are the rates at which these obligations could effectively be settled.
For benefit plans which are funded, we establish strategic asset allocation percentage targets and appropriate benchmarks for significant asset classes with the aim of achieving a prudent balance between return and risk. We set the expected long-term rate of return based on the expected long-term average rates of return to be achieved by the underlying investment portfolios. In establishing this rate, we consider historical and expected returns for the asset classes in which the plans are invested, advice from pension consultants and investment advisors, and current economic and capital market conditions. The expected return on plan assets is incorporated into the computation of pension expense. The difference between this expected return and the actual return on plan assets is deferred.
We believe that the current assumptions used to estimate plan obligations and annual expense are appropriate in the current economic environment. However, if economic conditions change, we may be inclined to change some of our assumptions, and the resulting change could have a material impact on the consolidated statements of operations and on the consolidated balance sheets.
Income Taxes
We are subject to income taxes in the United States and numerous foreign jurisdictions. Our annual effective tax rate is based on pre-tax earnings, statutory tax rates and enacted tax laws. Significant judgments and estimates must be made in determining our consolidated income tax expense as presented in our financial statements.
We must assess the likelihood that we will realize deferred tax assets which requires significant judgment. If we determine that deferred tax assets are not "more likely than not" to be realized, we record a valuation allowance to reduce deferred tax assets to a level that is expected to be realized. If we subsequently determine that realization of a deferred tax asset becomes "more likely than not", the valuation allowance will be reversed. Any change in valuation allowances could have a significant impact on our financial results.
The calculation of our tax liabilities involves an assessment of uncertainties in the application of complex tax laws and regulations in multiple jurisdictions. We record a benefit from an uncertain tax position when it is "more likely than not" that a tax return position will be sustained upon examination, including resolutions of any related appeals or litigation based on the technical merits of the position. If the position is not "more likely than not" to be sustained, a liability for the tax return position is established. We adjust the liability when our judgment changes as a result of the evaluation of new information. The ultimate tax due in a jurisdiction may result in a payment that is materially different from our most recent estimate of the liability. Further judgment is required in determining whether an uncertain tax position is effectively settled. Any change in the analysis will impact income tax expense.
We consider the earnings of most of our non-U.S. subsidiaries to be indefinitely invested outside the United States based on our estimates that future domestic cash generation will be sufficient to meet future domestic cash needs and our plans for reinvestment of foreign subsidiary earnings. As a result of the Tax Cut and Jobs Act, in 2017 the Company had recorded a deferred tax liability of approximately $1.8 million of withholding tax associated with a planned distribution of approximately $25.5 million of previously unremitted earnings. As of December 31, 2021, the planned distribution amount is approximately $14.1 million with a remaining deferred tax liability of approximately $1.5 million. In addition, we estimate that additional withholding taxes of approximately $22.5 million would be payable upon the distribution of the balance of our previously unremitted earnings at December 31, 2021. If we decide to distribute any portion of the balance of our unremitted earnings to the United States from a foreign country, we would adjust our income tax provision in the period we determine that the earnings are no longer indefinitely invested outside the United States.
Additional information about income taxes is included in Note 6 to our consolidated financial statements.
- 34 -
Results of Operations – Years Ended December 31, 2021, 2020, and 2019
Results of operations by reporting segments for the years ended December 31, 2020 and 2019 have been recast to reflect the new reporting segments as described under Item 7. Overview of Financial Results.
Statement of operations’ captions as a percentage of net revenues and the effective tax rates were as follows:
Years ended December 31,
Selling, general, and administrative expenses 30.0 % 29.0 % 28.0 %
Income before taxes 8.2 % 6.8 % 9.3 %
Net earnings attributable to VPG stockholders 6.4 % 4.0 % 7.8 %
Net Revenues
Net revenues were as follows (dollars in thousands):
Years ended December 31,
Percentage change versus prior year 17.8 % (5.0) %
Changes in net revenues were attributable to the following:
Change attributable to:
Change in volume 7.8 % (10.0) %
Change in average selling prices 0.5 % 0.3 %
Foreign currency effects 2.4 % 0.2 %
Acquisitions 7.1 % 4.5 %
During the year ended December 31, 2021, net revenues increased 17.8% over the prior year. Volume increased across all reporting segments, with the most significant increase coming from the industrial weighing, transportation, and other markets in the Weighing Solutions reporting segment. Net revenues in the Measurement Systems segment increased mainly due to the acquisition of DTS on June 1, 2021.
During the year ended December 31, 2020, net revenues decreased 5.0% over the prior year. Volume decreased across all reporting segments, with the most significant declines coming from the industrial weighing market in the Weighing Solutions reporting segment, the transportation market and KELK for the steel market in the Measurement Systems reporting segment, and the precision resistor foil for the test and measurement market in the Sensors reporting segment.This was partially offset by an increase in revenues attributable to the addition of DSI in the Measurement Systems reporting segment.
- 35 -
Gross Profit Margin