TG US Equity☆

tg-20231231

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 2023

OR

For the transition period from to

Commission File Number 1-10258

TREDEGAR CORPORATION

(Exact name of registrant as specified in its charter)

1100 Boulders Parkway,

(Address of principal executive offices) (Zip Code)

Registrant’s telephone number, including area code: 804-330-1000

Securities registered pursuant to Section 12(b) of the Act:

Title of each class Trading Symbol Name of each exchange on which registered

Common Stock TG New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ̈Nox

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ̈Nox

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yesx No ̈

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yesx No ̈

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer o Accelerated filer x Smaller reporting company o

Non-accelerated filer o Emerging growth company o

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ̈

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. x

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ̈

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ̈

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ̈ No x

Aggregate market value of voting and non-voting common equity held by non-affiliates of the registrant as of June 30, 2023 (the last business day of the registrant’s most recently completed second fiscal quarter): $278,307,771*

Number of shares of Common Stock outstanding as of March 8, 2024: 34,430,769

Documents Incorporated By Reference

Portions of the Tredegar Corporation Proxy Statement for the 2024 Annual Meeting of Shareholders (the “Proxy Statement”) are incorporated by reference into Part III of this Form 10-K.

Index to Annual Report on Form 10-K

Year Ended December 31, 2023

Page

Part I

Item 1. Business 1

Item 1A. Risk Factors 5

Item 1B. Unresolved Staff Comments 10

Item 1C. Cybersecurity 10

Item 2. Properties 11

Item 3. Legal Proceedings 11

Item 4. Mine Safety Disclosures 12

Part II

Item 6. [RESERVED] 14

Item 7A. Quantitative and Qualitative Disclosures About Market Risk 27

Item 8. Financial Statements and Supplementary Data 32

Item 9A. Controls and Procedures 32

Item 9B. Other Information 33

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 34

Part III

Item 10. Directors, Executive Officers and Corporate Governance 35

Item 11. Executive Compensation 35

Item 14. Principal Accounting Fees and Services 36

Part IV

Item 15. Exhibits and Financial Statement Schedules 37

PART I

Item 1. BUSINESS

Description of Business

Tredegar Corporation (“Tredegar”) is engaged, through its subsidiaries, in the manufacture of aluminum extrusions, polyethylene (“PE”) plastic films and polyester (“PET”) films. Unless the context requires otherwise, all references herein to “Tredegar,” “the Company,” “we,” “us” or “our” are to Tredegar Corporation and its consolidated subsidiaries.

The Company's reportable business segments are Aluminum Extrusions, PE Films and Flexible Packaging Films (also referred to as “Terphane”).

On September 1, 2023, the Company announced that it had entered into a definitive agreement to sell Terphane to Oben Group (the “Contingent Terphane Sale”). Completion of the sale is contingent upon the satisfaction of customary closing conditions, including the receipt of certain competition filing approvals by authorities in Brazil and Columbia. For more information see “Status of Current Corporate Strategic Initiatives - Agreement to Sell Terphane” in Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of this Annual Report on Form 10-K for the year ended December 31, 2023 (“Form 10-K”).

Aluminum Extrusions

Aluminum Extrusions, also referred to as Bonnell Aluminum, produces high-quality, soft and medium strength alloyed aluminum extrusions, custom fabricated and finished, for the building and construction, automotive and transportation, consumer durables goods, machinery and equipment, electrical and renewable energy, and distribution markets. Bonnell Aluminum has manufacturing facilities located in the United States (“U.S.”).

Aluminum Extrusions manufactures mill (unfinished), machined, anodized and painted, and thermally improved aluminum extrusions for sale directly to fabricators and distributors. It also manufactures and sells branded product lines: Futura TransitionsTM by Bonnell Aluminum (flooring trims) and TSLOTSTM by Bonnell Aluminum (structural aluminum framing systems). Aluminum Extrusions competes primarily on the basis of product quality, service and price. Sales are made predominantly in the U.S. The end-use markets for Aluminum Extrusions are cyclical and seasonal in nature.

The end-uses in each of Aluminum Extrusions’ primary market segments include:

Major Markets End-Uses

1

Aluminum Extrusions’ net sales (sales less freight) by market segment for the years ended December 31, 2023, 2022 and 2021 is shown below:

% of Aluminum Extrusions Net Sales1 by Market Segment

B&C:

Specialty:

Consumer durables 8% 10% 10%

Machinery & equipment 9% 10% 8%

Electrical 6% 4% 6%

Distribution 3% 5% 8%

In 2023, 2022 and 2021, Aluminum Extrusions net sales accounted for approximately 70%, 71% and 67% of Tredegar’s consolidated net sales, respectively.

Open Orders. Overall open orders in Aluminum Extrusions were approximately $48.0 million, or 14 million pounds, at December 31, 2023 compared to approximately $136.0 million, or 41 million pounds, at December 31, 2022, a decrease of $88.0 million, or approximately 65%. This level is below the quarterly range of 21 to 27 million pounds in 2019 before pandemic-related disruptions that resulted in long lead times, driving a peak in open orders of approximately 100 million pounds during the first quarter of 2022. We believe that current open orders are below pre-pandemic levels due to higher interest rates, tighter lender requirements and the increase in remote working, which particularly impacts the non-residential B&C end-use market. In addition, data indicates that aluminum extrusion imports increased significantly in recent years, especially during the pandemic, and some of Aluminum Extrusions’ customers may have sourced, and continue to source, aluminum extrusions from producers outside the U.S. Sales volume for Aluminum Extrusions, which the Company believes is cyclical and seasonal in nature due to its end-use markets, was 138.5 million pounds in 2023, 174.7 million pounds in 2022 and 183.4 million pounds in 2021.

Raw Materials. The primary raw materials used by Aluminum Extrusions consist of aluminum ingot, aluminum scrap and various alloys, which are purchased from domestic and foreign producers in open-market purchases and under annual contracts. Refer to Item 7A. "Quantitative and Qualitative Disclosures About Market Risk” of this Form 10-K (“Item 7A”) for additional information on aluminum price trends. Aluminum Extrusions believes that it has adequate supply agreements for aluminum raw materials in 2024.

PE Films

PE Films produces surface protection films, polyethylene overwrap films and films for other markets. Tredegar’s Surface Protection unit produces single- and multi-layer surface protection films sold under the UltraMask®, ForceFieldTM, ForceField PEARL®, Pearl ATM and ObsidianTM brand names. These films, which are manufactured at facilities in the U.S. and China, support manufacturers of optical and other specialty substrates used in high-technology applications, most notably protecting high-value components of flat panel and flexible displays used in televisions, monitors, notebooks, smartphones, tablets, e-readers, digital signage, semiconductors and automobiles during the manufacturing and transportation process. The ObsidianTM series of products is designed for usage in automotive applications. In 2023, 2022 and 2021, PE Films accounted for approximately 11%, 11% and 15% of Tredegar’s consolidated net sales, respectively.

Raw Materials. The primary raw materials used by PE Films are polyethylene and polypropylene resins. These raw materials are obtained from domestic and foreign suppliers at competitive prices. Refer to Item 7A for additional information on resin price trends. PE Films believes that there will be an adequate supply of polyethylene and polypropylene resins in the foreseeable future.

2

Research and Development. Tredegar’s spending for research and development (“R&D”) activities in 2023, 2022 and 2021 was primarily related to PE Films. During the third quarter of 2023, the Company adopted a plan to close the PE Films technical center in Richmond, VA. Future R&D activities will be performed at the facility in Pottsville, PA. R&D spending by the PE Films was approximately $2.9 million, $5.3 million and $5.7 million in 2023, 2022 and 2021, respectively.

Customers. PE Films’ products are sold primarily in the U.S. and Asia, with the top four customers, collectively, comprising 87% of its net sales in 2023 and 88% in 2022 and 2021. No single PE Films customer exceeds 10% of Tredegar’s consolidated net sales. For additional information, see Item 1A. “Risk Factors” of this Form 10-K (“Item 1A”).

Flexible Packaging Films

Flexible Packaging Films produces PET-based films for use in packaging applications that have specialized properties, such as heat resistance, strength, barrier protection and the ability to accept high-quality print graphics. These differentiated, high-value films are primarily manufactured in Brazil and sold in Latin America and the U.S. under the Terphane®, Sealphane® and Ecophane® brand names. Major end uses include food packaging and industrial applications. Flexible Packaging Films competes in all of its markets on the basis of product quality, service and price. In 2023, 2022 and 2021, Terphane accounted for approximately 19%, 19% and 18% of Tredegar’s consolidated net sales, respectively.

Raw Materials. The primary raw materials used by Flexible Packaging Films to produce polyester resins are purified terephthalic acid (“PTA”) and monoethylene glycol (“MEG”). Flexible Packaging Films also purchases other polyester resins directly from suppliers. These raw materials are obtained from Brazilian and foreign suppliers at competitive prices. Terphane continues to monitor cost escalations to adjust selling prices as market dynamics permit and believes that there will be an adequate supply of polyester resins, PTA and MEG in the foreseeable future. Refer to Item 7A for additional information on resin price trends.

General

Intellectual Property. Tredegar considers patents, licenses and trademarks to be material to PE Films. On December 31, 2023, PE Films held 37 patents (including 6 U.S. patents), and 66 registered trademarks (including 4 U.S. registered trademarks). Flexible Packaging Films held 1 U.S. patent and 17 registered trademarks (including 4 U.S. registered trademarks). Aluminum Extrusions held no U.S. patents and 3 U.S. registered trademarks. As of December 31, 2023, these patents had remaining terms of 0.5 to 17 years.

Government Regulation. The Company’s operations are subject to various local, state, federal and foreign government regulations, including environmental, privacy and anti-corruption and anti-bribery laws and regulations.

U.S. laws concerning the environment to which the Company’s domestic operations are or may be subject to include the Clean Water Act, the Clean Air Act, the Resource Conservation and Recovery Act, the Occupational Safety and Health Act, the National Environmental Policy Act, the Toxic Substances Control Act, the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”), regulations promulgated under these acts, and other federal, state or local laws or regulations governing environmental matters. Compliance with these laws is an important consideration because Tredegar uses hazardous materials in some of its operations, is a generator of hazardous waste, and wastewater from the Company’s operations is discharged to various types of wastewater management systems. Under CERCLA and other laws, Tredegar may be subject to financial exposure for costs associated with waste management and disposal, even if the Company fully complies with applicable environmental laws.

The U.S. Environmental Protection Agency has adopted regulations under the Clean Air Act relating to emissions of carbon dioxide and other greenhouse gases (“GHG”), including mandatory reporting and permitting requirements. Several of the Company’s manufacturing operations result in emissions of carbon dioxide or GHG and are subject to the current GHG regulations. The Company’s compliance with environmental regulations has yet to require significant capital expenditures; however, environmental standards tend to become more stringent over time. Therefore, in order to comply with current or future environmental legislation or regulations, the Company may be subject to additional capital expenditures, operating expenses or other compliance costs, the amounts and timing of which are not presently determinable, but which could be significant, including constructing new facilities or modifying existing facilities.

Like environmental regulations, current or future privacy and anti-corruption and anti-bribery legislation or regulations may subject the Company to additional capital expenditures, operating expenses or other compliance costs, the amounts and timing of which are not presently determinable but could be significant. Any failure to comply with current or future laws and regulations, including environmental, privacy and anti-corruption and anti-bribery laws and regulations, could subject Tredegar to substantial penalties, fines, costs and expenses. For further discussion regarding certain environmental, privacy and anti-corruption and anti-bribery laws and regulations to which the Company is subject, see Item 1A below.

3

Human Capital Management.

Overview

Tredegar employed approximately 1,900 people at December 31, 2023 located in the U.S., Brazil, and Asia, of which 75% are located in the U.S. Approximately 15% of the Company’s employees are represented by labor unions located in the U.S. under various collective bargaining agreements with varying durations and expiration dates, none of which expire before 2025. All of Tredegar’s Brazilian employees are represented by a national labor union. Generally, the total number of employees of Tredegar does not significantly fluctuate throughout the year. However, acquisition or divestiture activity, or changes in the level of business activity may impact employee levels.

Health and Safety

Tredegar has continuously exceeded the industry standards for safety in each of its respective manufacturing sectors. The Company uses various forms of employee safety metrics to assess the health and safety performance of its Aluminum Extrusions, PE Films and Flexible Packaging operations, including employee safety data which is available on the Company’s website at www.tredegar.com/about-tredegar/our-broader-commitments/committed-to-our-employees/.

Additionally, Aluminum Extrusions has on-site health clinics at its Carthage and Clearfield facilities. These clinics allow Aluminum Extrusions to invest in its people, provide more personal and more thorough healthcare to employees, and enhance the employer-employee relationship. Collectively, the Carthage and Clearfield clinics serve over 600 employees.

Talent and Development

The Company believes its employees are its most valuable asset and are critical to the success of the Company. The Company seeks to retain employees by offering competitive wages, benefits and training opportunities. To assess and monitor employee retention and engagement, the Company surveys employees and takes actions to address areas of employee concern. The annual employee engagement survey results are presented to Tredegar’s Board of Directors (“Board”). Additionally, the objectives of our executive compensation programs are to attract, motivate and retain highly qualified executive officers. To accomplish these objectives, the Company relies on a pay strategy that emphasizes performance-based compensation through annual and long-term incentives. The Company believes that this pay strategy creates a strong link between pay and performance and aligns with our business strategy of generating strong operating results and shareholder value creation while controlling fixed costs.

The Company is committed to holistically supporting our employees both at work and in their communities by:

•Strictly following all applicable health, safety and non-discrimination laws in each country;

•Promoting the highest standards for employee health and safety through innovative programs; and

•Providing opportunities for community outreach and supporting programs that enhance the lives of children and families.

Inclusion and Diversity

Tredegar strictly complies with all applicable state, local and international laws governing nondiscrimination in employment in every location where Tredegar and its businesses have facilities to ensure healthy and positive working conditions. This applies to all terms and conditions of employment, including recruiting, hiring, job assignments, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. All applicants and employees are treated with the same high level of respect regardless of their race, creed, color, religion, sex, sexual orientation, gender identity, age, pregnancy, national origin, ethnicity, political affiliation, union membership, marital status, citizenship status, veteran status, disability or other protected category. Employees who experience or witness discriminatory behavior are encouraged to report such behavior to their supervisor, Human Resources or Tredegar’s toll-free anonymous reporting hotline. Additionally, the Company spends significant resources in developing its employees. Among the five core principles of the “The Tredegar Way” that the Company uses to guide its organization, the “Leadership” principle is focused on building a team of motivated and engaged leaders at every level of the Company. Each business unit has identified specific action plans to promote the Leadership principle among its employees. Action plans include talent development, skills training, reinforcement of strong cultural values, and robust systems to ensure a safe working environment.

Information About Our Executive Officers. See Item 10. “Directors, Executive Officers and Corporate Governance” of this Form 10-K.

Available Information and Corporate Governance Documents. Tredegar’s website address is www.tredegar.com. The Company makes available, through its website, its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as soon as reasonably practicable after such documents are electronically filed with, or furnished to, the Securities and Exchange Commission (“SEC”). Information filed electronically with the SEC can be accessed on its website at www.sec.gov. In addition, the Company’s Corporate Governance Guidelines, Code of Conduct, the

4

charters of the Audit, Executive Compensation, Nominating and Governance Committees and Climate Change Risk Assessment and many other corporate policies are available on Tredegar’s website and are available in print to any shareholder upon request by contacting Tredegar’s Corporate Secretary at 1100 Boulders Parkway, Richmond, Virginia 23225. The information on or that can be accessed through the Company’s website is not, and shall not be deemed to be, a part of this Form 10-K or incorporated into other filings it makes with the SEC.

Forward-looking and Cautionary Statements

Some of the information contained in this Form 10-K may constitute “forward-looking statements” within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. When the Company uses the words “believe,” “estimate,” “anticipate,” “appear to,” “expect,” “project,” “plan,” “likely,” “may” and similar expressions, it does so to identify forward-looking statements. Such statements are based on the Company's then current expectations and are subject to a number of risks and uncertainties that could cause actual results to differ materially from those addressed in the forward-looking statements. It is possible that the Company's actual results and financial condition may differ, possibly materially, from the anticipated results and financial condition indicated in or implied by these forward-looking statements. Accordingly, you should not place undue reliance on these forward-looking statements. For risks and important factors that could cause actual results to differ from expectations, refer to the reports that Tredegar files with or furnishes the SEC from time-to-time, including the risks and important factors set forth in Item 1A. Readers are urged to review and consider carefully the disclosures Tredegar makes in the reports Tredegar files with or furnishes to the SEC. Tredegar does not undertake, and expressly disclaims any duty, to update any forward-looking statement to reflect any change in management’s expectations or any change in conditions, assumptions or circumstances on which such statements are based, except as required by applicable law.

Item 1A. RISK FACTORS

There are a number of risks and uncertainties that could have a material adverse effect on the Company’s businesses and its consolidated financial condition, results of operations or cash flows. The following risk factors should be considered, in addition to the other information included in this Form 10-K, when evaluating Tredegar and its businesses.

Risks Related to Tredegar’s Corporate Strategic Initiatives and Indebtedness

•The planned divestiture of Terphane to Oben Group is subject to a number of conditions beyond our control. On September 1, 2023, the Company announced that it had entered into a definitive agreement to sell Terphane to Oben Group. Completion of the sale is contingent upon the satisfaction of customary closing conditions, including the receipt of certain competition filing approvals by authorities in Brazil and Colombia. On October 27, 2023, the Company filed the requisite competition forms with the Administrative Council for Economic Defense (“CADE”) in Brazil, which the Company views as the primary competition authority regarding this matter. This filing followed a pre-filing phase for CADE’s initial review. CADE’s maximum deadline for completing its review is no later than November 18, 2024. The merger review regarding the transaction was cleared by the Colombian authority in early February 2024.

As usual, it cannot be predicted with certainty whether all of the required closing conditions will be satisfied, waived or if other uncertainties may arise. While the regulatory review process is ongoing and in line with the Company’s expectations, regulators could impose additional requirements or obligations as conditions for their approval, which may be burdensome. If such closing conditions are not met or additional obligations are imposed, the proposed sale may not be consummated, encounter delays, or experience other issues that are not currently anticipated.

•The Company’s failure to successfully transition to the reporting requirements for its asset-based revolving credit facility (“ABL Facility”), which matures on June 30, 2026, or an unexpected downturn in the markets could adversely impact the Company’s financial position and results of operations. On December 27, 2023, the Company entered into the ABL Facility, which provides the Company with $180 million senior secured asset-based revolving credit facility that will expire on June 30, 2026. The ABL Facility amended the Company’s existing $200 million revolving, secured credit facility that was cash flow-based. Availability under the ABL Facility is governed by a borrowing base, determined by the application of specified advance rates against eligible assets, including a portion of trade accounts receivable, inventory, cash and cash equivalents, owned real properties, and owned machinery and equipment.

A number of factors could affect the Company’s ability to successfully complete its transition from its prior cash flow-based revolving credit facility to the current asset-based facility. These factors include:

•Failure to establish processes associated with the ABL Facility’s reporting requirements, which are currently on a monthly basis but could change to a weekly cadence if at any time the borrowing availability falls below 10% of the maximum aggregate principal amount. Failure to timely report could result in an Event of Default (as defined in the ABL Facility), which if not waived, would permit the lenders, at their option, to accelerate all outstanding debt under the ABL Facility. Should the lenders elect to accelerate the debt under the ABL Facility,

5

a cross-default would be triggered under the Terphane Brazil Loan (as defined below in Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of this Form 10-K (“Item 7”)).

•Because the Company is currently subject to a Cash Dominion Period (as defined in Item 7), it is required to borrow cash to fund working capital, capital expenditures, business development activity, and other general corporate purposes, which limits its financial flexibility;

•Advances on accounts receivable and inventory are subject to change based on periodic commercial finance examinations and appraisals, and the real property, machinery and equipment values included in the borrowing base are subject to change based on periodic appraisals, which could reduce borrowing availability under the ABL Facility; and

•If a Material Adverse Effect (as defined in the ABL Facility) has occurred, the Company will not be able to continue to borrow under the ABL Facility.

In addition, a significant deterioration in the Company’s accounts receivable or inventory levels due to depressed economic conditions, weak consumer spending, turmoil in the credit markets or other factors, could restrict its ability to service its indebtedness or borrow additional funds.

Upon the earlier of March 31, 2025 or the date the Company receives the proceeds from the Contingent Terphane Sale (the “ABL Adjustment Date”), borrowing availability under the ABL Facility will be reduced from $180 million to $125 million. If the Contingent Terphane Sale is not completed by the ABL Adjustment Date, the Company may have to undertake alternative financing plans, subject to the limitations imposed by the ABL Facility, including limitations on its ability to:

•refinance or restructure its indebtedness;

•sell assets; and

•raise additional capital.

The Company may be unable to implement alternative financing plans on commercially reasonable terms or at all, and any such alternative financing plans might be insufficient to allow it to make principal and interest payments on its indebtedness required as a result of the ABL Adjustment Date and the reduction of borrowing availability under the ABL Facility to $125 million. The Company’s ability to restructure or refinance its indebtedness will depend on, among other things, its existing financial condition, projections of business conditions, sales, Credit EBITDA, net cash flow, net leverage and the condition of the capital markets at such time. Any refinancing of the Company’s indebtedness could be at higher interest rates and could require it to comply with additional covenants, which could further restrict the Company’s business operations.

Noncompliance with any of the covenants of the ABL Facility could result int an Event of Default, which if not cured or waived, would permit the lenders, at their option, to accelerate all outstanding debt under the ABL Facility.

Risks Related to All Tredegar’s Businesses

•Recent macroeconomic factors, including inflation, high interest rates, recession risks and other lagging effects of the COVID-19 pandemic, have caused downturns in key markets and created other commercial disruptions, which have and could further adversely impact our businesses.Products sold to key end-use markets, including the B&C and consumer electronics markets, represent a significant portion of our revenue. Because these markets are tied closely to overall economic performance, macroeconomic factors have and could further cause changes to demand for our products. These factors include: (i) inflation; (ii) high interest rates; (iii) recession risks; (iv) disruptions to supply chains; (v) other interruptions of international and regional commerce; and (vi) other lagging effects of the COVID-19 pandemic. Price erosion may occur as competitors become more aggressive in pricing practices. To the extent that these factors reduce demand for our products, our business, financial position, results of operations and cash flows could be adversely impacted.

•Tredegar’s performance is influenced by costs incurred by its operating companies, including the cost of raw materials and energy. These costs include the cost of aluminum (the raw material on which Aluminum Extrusions primarily depends), resin (the raw material on which PE Films primarily depends), PTA and MEG (the raw materials on which Flexible Packaging Films primarily depends), natural gas (the principal fuel necessary for Aluminum Extrusions’ plants to operate), electricity, diesel fuel and paint. Aluminum, resin and natural gas prices are volatile as shown in the charts in Item 7A. The Company attempts to mitigate the effects of increased costs through price increases and contractual pass-through provisions, but there are no assurances that higher prices can effectively be passed through to customers or that Tredegar will be able to offset fully or on a timely basis the effects of higher costs. Further, the Company’s cost control efforts may not be sufficient to offset any increases in raw materials, energy or other costs.

6

•Our failure to continue to attract, develop and retain certain key officers or employees could adversely affect our businesses. Our success depends upon the efforts and abilities of key personnel, many of whom are longstanding employees. The loss of any of these key personnel could deplete our institutional knowledge base and negatively affect our ability to efficiently operate our businesses. Certain roles have experienced high turnover in recent years, and we are experiencing an increasingly competitive labor market. Increased employee turnover could hinder our ability to execute our business strategy and adversely affect our business, financial condition, results of operations and cash flows.

•Disruptions at one of the Company’s major manufacturing facilities could negatively impact financial results. Tredegar believes it has implemented measures to minimize the risks of disruption at its facilities. However, a disruption could occur as a result of any number of events: an equipment failure with repairs requiring long lead times, labor stoppages or shortages, cybersecurity attacks, utility disruptions, constraints on the supply or delivery of critical raw materials, and severe weather conditions, including potential flooding at the Aluminum Extrusions facility located in Carthage, TN, which is located in a 50-year flood plain. A material disruption in one of the Company’s operating locations could negatively impact production and the Company’s consolidated financial condition, results of operations and cash flows.

Risks Related to Aluminum Extrusions

•Sales volume and profitability of Aluminum Extrusions is cyclical and seasonal and highly dependent on economic conditions of end-use markets in the U.S., particularly in the construction sector. Aluminum Extrusions’ end-use markets can be cyclical and subject to seasonal swings in volume. In addition, changes in architectural design, demographic, and/or remote work trends could negatively impact the overall commercial construction industry. Because of the capital-intensive nature and level of fixed costs inherent in the aluminum extrusions business, the percentage drop in earnings before interest, taxes, depreciation and amortization (“EBITDA”) from ongoing operations in a cyclical downturn will likely exceed the percentage drop in volume. In addition, during an economic slowdown, excess industry capacity often drives increased pricing pressure in many end-use markets as competitors seek to protect their position with key customers. Any benefits associated with cost reductions and productivity improvements may not be sufficient to offset the adverse effects on profitability from pricing and margin pressure and higher bad debts (including a greater chance of loss associated with customers defaulting on fixed-price forward sales contracts) that usually accompany a downturn.

•Unfairly traded imports of aluminum extrusions could injure or threaten with injury America’s domestic aluminum extrusions industry, which could have an adverse effect on the financial condition, results of operations and cash flows of Aluminum Extrusions.

1.Failure to prevent foreign competitors from evading anti-dumping and countervailing duties, or failure to reinstate the Aluminum Tariff on aluminum extrusions, could adversely impact Aluminum Extrusions. In 2018, the U.S. imposed tariffs of 10% on aluminum ingot and semi-finished aluminum imported into the U.S. from certain countries; however, in December 2020, the Department of Commerce (“DOC”) introduced a tariff exclusion process, granting applicants with tariff exclusions. In response to large and increasing volumes of unfairly traded imports of extrusions associated with these tariff exclusions, a coalition of U.S. domestic producers filed petitions with the DOC and U.S. International Trade Commission (“ITC”). In November 2023, the ITC found that there is a reasonable indication that the American aluminum extrusions industry is materially injured or threatened with injury due to imports from 14 countries, including China. The ITC’s preliminary determination found that subject import volumes were significant and increasing, and that with regard to pricing, subject imports predominantly undersold the domestic product by volume in each year of the period of investigation. On March 5, 2024, the DOC announced its preliminary finding that the governments of China, Indonesia, Mexico and Turkey unfairly subsidize their aluminum extrusion industries. The DOC calculated a range of affirmative preliminary countervailing duties from each country. A preliminary anti-dumping determination for these four countries and the 10 other countries included in the initial petition is expected in May 2024. The Company expects the final ITC vote to occur in late 2024. A failure by, or the inability of, U.S. trade officials to restore the import tariff in its full format could have an adverse effect on the businesses, financial condition, results of operations and cash flows of Aluminum Extrusions.

2.The duty-free importation of goods allowed under the United States-Mexico-Canada Agreement (“USMCA”), or other free trade agreements or duty-preference regimes, could result in lower demand for aluminum extrusions made in the U.S. As noted above, in March 2018, the U.S. imposed tariffs of 10% on aluminum ingot and semi-finished aluminum imported into the U.S. from certain countries, including countries from which Aluminum Extrusions has historically sourced aluminum products. In September 2019, the U.S., Canada and Mexico entered into the USMCA. As a result of the 10% tariffs on aluminum ingot imported to the U.S. and the duty-free importation of goods allowed under USMCA, aluminum extrusions made in Canada and Mexico that are able to take advantage of duty-preference programs upon importation into the United States are free of the

7

10% tariff and can now be imported into and sold in the U.S. at very competitive prices. This could result in lower demand for aluminum extrusions made in the U.S., which could negatively affect Aluminum Extrusions’ business, results of operations, financial condition and cash flows.

•The markets for Aluminum Extrusions’ products are highly competitive with product quality, service, delivery performance and price being the principal competitive factors. Aluminum Extrusions has approximately 1,100 customers that are in a variety of end-use markets within the broad categories of building and construction, distribution, automotive and other transportation, machinery and equipment, electrical and consumer durables. No single Aluminum Extrusions’ customer exceeds 4% of consolidated net sales. Future success and prospects depend on Aluminum Extrusions’ ability to provide superior service, high quality products, timely delivery and competitive pricing to retain existing customers and participate in overall industry cross-cycle growth. Failure in any of these areas could lead to a loss of customers, which could have an adverse effect on the business, financial condition, results of operations and cash flows of Aluminum Extrusions.

•The failure to successfully implement the new enterprise resource planning and manufacturing execution systems could adversely impact the Aluminum Extrusions business and results of operations. InJanuary 2022, Aluminum Extrusions commenced the implementation of new enterprise resource planning and manufacturing execution systems (“ERP/MES”) across all locations of the Aluminum Extrusions business. The implementation of these systems is a major undertaking from a financial, management, and personnel perspective. The implementations have been more difficult, time consuming and costly (approximately $21 million of spending to date) than expected. This project, which was expected to be completed in 2024, has been reorganized with an extended implementation period, due to the implementation of stringent spending measures to control financial leverage. As a result, the earliest “go-live” date for the new ERP/MES is 2025. There can be no assurance that these systems will be beneficial to the extent anticipated. Any additional disruptions, delays or deficiencies in the design and implementation of the new systems could adversely affect our financial position, results of operations and cash flows.

Risks Related to PE Films

•PE Films is highly dependent on sales associated with relatively few large customers. PE Films’ top four customers comprised approximately 10%, 10% and 13% of Tredegar’s consolidated net sales in 2023, 2022 and 2021, respectively. The loss or significant reduction of sales associated with one or more of these customers without replacement by new business could have an adverse effect on the Company. Surface Protection sales have been adversely impacted by weak market demand and competitive pricing. Customer demand for electronics has continued to deteriorate since the third quarter of 2022, causing manufacturers in the supply chain to experience reduced capacity utilization and inventory corrections. Consequently, results of operations for PE Films have been adversely impacted by weak demand for Surface Protection products.

While PE Films is undertaking efforts to expand its customer base, there can be no assurance that such efforts will be successful, or that they will offset any loss of sales and profits associated with large customer declines.

•The failure of PE Films’ customers to achieve success or maintain market share could adversely impact PE Films’ sales and operating margins. PE Films’ plastic films are used in the production of various consumer products sold worldwide. Our customers’ ability to successfully develop, manufacture and market those products is integral to PE Films’ success. Cyclical downturns and changing consumer preferences, particularly those driven by changes in technology, may negatively affect businesses that use PE Films’ plastic film products, which could adversely affect sales and operating margins. Other factors that could adversely affect the business include (i) failure by a key customer to achieve success or maintain share in markets in which they sell products containing PE Films’ materials, including as a result of customer preferences for products other than plastics, (ii) key customers using products developed by others that replace PE Films’ business with such customers, (iii) delays in a key customer rolling out products utilizing new technologies developed by PE Films, and (iv) operational decisions by a key customer that result in component substitution, inventory reductions and similar changes.

•The Company’s inability to protect its intellectual property rights or its infringement of the intellectual property rights of others could have an adverse impact on PE Films. The continued success of PE Films’ business depends on its ability not only to protect its own technologies and trade secrets, but also to develop and sell new products that do not infringe upon existing patents. Intellectual property litigation is very costly and could result in substantial expense and diversions of Company resources, both of which could adversely affect its consolidated financial condition, results of operations and cash flows. In addition, there may be no effective legal recourse against infringement of the Company’s intellectual property by third parties, whether due to limitations on enforcement of rights in foreign jurisdictions or as a result of other factors.

•Rising trade tensions could cause an increase in the cost of PE Films’ products or otherwise negatively impact the Company. A portion of PE Film’s business involves imports to and from the U.S. and other countries where the

8

Company produces and sells its products. Trade tensions have been rising between the U.S. and other countries, particularly China. An increase in tariffs and other trade barriers between the U.S. and China, or between the U.S. and other countries, could cause an increase in the cost of PE Films’ products or otherwise negatively impact the production and sale of the Company’s products in world markets.

•Further impairment of the Surface Protection reporting unit’s goodwill could have a non-cash adverse impact on our results of operations. The Company assesses goodwill for impairment when events or circumstances indicate that the carrying value may not be recoverable, or, at a minimum, on an annual basis (December 1st of each year). The valuation of goodwill depends on a variety of factors, including macroeconomic conditions, industry and market considerations, cost factors and overall financial performance, as well as Company and reporting unit factors, and goodwill impairment valuations can be sensitive to assumptions associated with such factors. Failure to successfully achieve projections could result in future impairments.

Risks Related to Flexible Packaging Films

•Overcapacity in Latin American polyester film production and governmental failure to extend anti-dumping duties in Brazil on imported products or prevent competitors from circumventing such duties could adversely impact Flexible Packaging Films. In recent years, excess global capacity in the industry has led to increased competitive pressures from imports into Brazil. The Company believes that these conditions have shifted the competitive environment from a regional to a global landscape and have driven price convergence and lower product margins for Flexible Packaging Films. Favorable anti-dumping rulings or countervailing duties are in effect for products imported from China, Egypt, India, Mexico, United Arab Emirates, Peru and Bahrain. Competitors not currently subject to anti-dumping duties may choose to utilize their excess capacity by selling product in Brazil, which may result in pricing pressures that Flexible Packaging Films may not be able to offset with cost savings measures and/or manufacturing efficiency initiatives.

In May 2021, the Brazilian authorities concluded the sunset review relating to the anti-dumping process for polyester film imported from China, India and Egypt, and decided to extend duties for another five years. However, due to its doubts that films would continue to be imported from China and Egypt, the government immediately suspended the implementation of the tariffs for those countries but agreed that if in the future there were volumes imported from China or Egypt which were harming the Brazilian market, authorities may promptly reinstate tariffs. Importing from Egypt increased in Brazil during 2023; therefore, Terphane requested the application of anti-dumping tariffs for Egypt, which was accepted by the Brazilian Government. These tariffs went into effect starting in November 2023. For films imported from India, the Brazilian authorities also reviewed measures against countervailing duties and extended those for five years as well.

In February 2024, the Brazilian Government determined that the anti-dumping measures against Mexico and United Arab Emirates should be extended for a five-year period and anti-dumping measures against Turkey should be removed.

•A history of uncertain economic conditions in Brazil could adversely impact the financial condition, results of operations and cash flows of Flexible Packaging Films. For flexible packaging films produced in Brazil, selling prices and key raw material costs are principally determined in U.S. Dollars and are impacted by local economic conditions and local and global competitive dynamics. Flexible Packaging Films is exposed to foreign exchange translation risk (its functional currency is the Brazilian Real) because almost 90% of the sales of Flexible Packaging Films business unit in Brazil (“Terphane Ltda.”) and substantially all of its related raw material costs are quoted or priced in U.S. Dollars while its variable conversion, fixed conversion and sales, general and administrative costs before depreciation & amortization (collectively “Terphane Ltda. Operating Costs”) are quoted or priced in Brazilian Real. This mismatch, together with a variety of economic variables impacting currency exchange rates, causes volatility that could negatively or positively impact EBITDA from ongoing operations for Flexible Packaging Films. While Flexible Packaging Films hedges this exposure on a short-term basis with foreign exchange forward rate contracts, the exposure continues to exist beyond the hedging periods.

Other Business Risks

•A failure in the Company’s information technology systems as a result of cybersecurity attacks or other causes could negatively affect Tredegar’s business. The Company depends on information technology (“IT”) to record and process customer orders, manufacture and ship products in a timely manner, secure its production processes and know-how, maintain the financial accuracy of its business records and maintain personally identifiable information of its employees. An IT system failure due to computer viruses, internal or external security breaches, cybersecurity attacks or other malicious causes could disrupt our operations and prevent us from being able to process transactions with our customers, operate our manufacturing facilities and properly report transactions in a timely manner. Increased global IT security threats and cyber-crime pose a potential risk to the security and availability of the Company’s IT systems, networks and services, including those that are managed, hosted, provided or used by third parties, as well as to the confidentiality, availability and integrity of the Company’s data. Additionally, increased cybersecurity risk arises due to certain employees working remotely. To date, interruptions of the Company’s IT systems have been infrequent, and Tredegar

9

has not experienced a material cybersecurity incident. A significant prolonged failure of or security breach of the IT systems, networks or service providers the Company relies upon, or a loss or disclosure of business or other sensitive information, or personally identifiable information, as a result of a cybersecurity incident or other cause, could result in substantial costs to the Company, damage to the Company’s reputation, regulatory enforcement actions and lawsuits and could adversely affect the Company’s business, results of operations, financial condition or cash flows.

•The Company’s results of operations, financial condition and cash flows have been and could be impacted by the macroeconomic effects of a pandemic.The COVID-19 pandemic had multiple adverse effects on the global economy, including short-term impacts affecting labor supply and causing supply chain disruptions which led to inflationary pressures. In addition, the pandemic resulted in certain after-shocks and structural shifts, which have adversely impacted Tredegar’s markets.

In the event of a future pandemic, Tredegar’s businesses, our suppliers, contractors and third-party logistic providers could experience conditions similar to those associated with the COVID-19 pandemic, including facility closures, labor constraints, supply chain disruptions and other challenges. These challenges could impact our ability to maintain sufficient inventory and to accurately predict demand or lead times, which could inhibit our ability to service customer demand. Additionally, a future pandemic could heighten other risks described above.

•Tredegar is subject to current and future governmental regulations, including environmental laws and regulations, and could become exposed to liabilities and costs associated with such regulation. The Company is subject to regulation by local, state, federal and foreign governmental authorities. New laws and regulations, or changes to existing laws, including those relating to environmental matters (including global climate change and plastic products), and privacy matters, could subject Tredegar to significant additional capital expenditures, operating expenses or other compliance costs. Moreover, future developments in federal, state, local and international laws and regulations, including environmental laws, are difficult to predict. Environmental laws and privacy restrictions have become and are expected to continue to become increasingly strict. As a result, Tredegar expects to be subject to new environmental and privacy laws and regulations. However, any such changes are uncertain and, therefore, it is not possible for the Company to predict with certainty the amount of additional capital expenditures or operating expenses that could be necessary for compliance with respect to any such changes.

The Company is subject to the U.S. Foreign Corrupt Practices Act, Brazilian anti-corruption laws and similar anti-bribery laws in other jurisdictions, which generally prohibit companies and their intermediaries from making improper payments to foreign officials for the purpose of obtaining or retaining business. Although we have policies and procedures designed to facilitate compliance with these laws and regulations, our employees, contractors and agents may take actions in violation of our policies. Any such violation, even if prohibited by our policies, could adversely affect our business and/or our reputation.

Item 1B. UNRESOLVED STAFF COMMENTS

None.

Item 1C. CYBERSECURITY

Tredegar’s business model depends on the efficiency and reliability of its information systems, networks, and essential assets, with a portion of these systems and networks being administered by third-party service providers. Tredegar’s Cybersecurity Program (the “Program”), which was designed utilizing a risk-based approach, was developed to not only prevent, identify, investigate, resolve, and mitigate potential cybersecurity vulnerabilities within Tredegar but also to enhance the information security posture of Tredegar’s operations involving third-party service providers.

Tredegar entrusts the third-party service providers with the responsibility to institute security measure protocols that are appropriately and proportionally tailored to the corresponding risks. Additionally, Tredegar also periodically conducts assessments of the third-party service providers’ security frameworks to verify the implementation of adequate security measures, to safeguard Tredegar against potential vulnerabilities.

The Program leverages a blend of automated systems, manual operations, and external evaluations to proactively identify and mitigate potential cybersecurity threats. Key components of the program include Tredegar’s Cybersecurity Incident Response Plan and Cyber Crisis Management Plan. These plans encompass a strategic approach that includes detection of threats, thorough analysis of cybersecurity incidents to determine whether timely notification to the Board of Directors is necessary, containment of incidents, eradication or mitigation of threats, recovery processes, and a comprehensive post-incident review.

To further strengthen its cybersecurity posture, Tredegar employs third-party consultants who work with the internal audit and information technology (“IT”) departments to assess Tredegar’s information security program and practices, including incident management, service continuity, and information security compliance programs, and identify areas for improvement.

10

The results of such an assessment are regularly presented to the Audit Committee. Notably, these assessments include periodic penetration tests, which allow Tredegar to identify vulnerabilities, refine procedures, and enhance its crisis management and recovery capabilities. The Program is also supported by an organizational structure, involving collaboration across various business sectors and an interdisciplinary Global Data Protection and Cybersecurity Oversight Team that meets regularly to identify information security risks and appropriate risk mitigation strategies. Additionally, because Tredegar recognizes the significant role that its employees play in information security, it provides annual formal information security training to all of its employees that covers critical topics such as phishing and email security best practices.

Tredegar’s IT Director has over 10 years of cybersecurity expertise, including a robust history of similar roles, cybersecurity certifications from EC-Council and ODU Global and holds a degree in Computer Science from Universidade Catolica de Pernambuco and an MBA in IT Management from Universidade Federal de Pernambuco. Our IT Director is responsible for overseeing the Program, including the prevention, mitigation, detection, and remediation of cybersecurity incidents. Tredegar’s IT Director also regularly collaborates closely with key management, including the Chief Financial Officer, General Counsel, Compliance Manager, and Human Resources Executive Director, to foster effective communication within Tredegar.

The Board is responsible for risk management, with specific oversight of cybersecurity risks being delegated to the Audit Committee. The Audit Committee receives updates from the IT Director at each of its quarterly meetings. These updates encompass an assessment of Tredegar’s cybersecurity risk profile, including the efficacy of Tredegar’s cybersecurity policies, procedures, strategies, and areas of emerging risk. Additionally, the Board receives annual, but often more frequent, updates on Tredegar’s cybersecurity systems.

Item 2. PROPERTIES

General

Most of the improved real property and the other assets used in the Company’s operations are owned. Certain of the owned property is subject to an encumbrance under the ABL Facility. See Note 7 “Debt and Credit Agreements” to the Consolidated Financial Statements in Item 15 for more information.

Tredegar considers the manufacturing facilities, warehouses and other properties and assets that it owns or leases to be in generally good condition. Capacity utilization at its various manufacturing facilities can vary with product mix and normal fluctuations in sales levels. The Company believes that its Bonnell Aluminum, PE Films and Flexible Packaging Films manufacturing facilities have sufficient capacity to meet current production requirements. Tredegar’s corporate headquarters, which is leased, is located at 1100 Boulders Parkway, Richmond, Virginia 23225.

The Company’s principal manufacturing plants and facilities as of December 31, 2023 are listed below:

Aluminum Extrusions

Locations in the U.S. Locations Outside the U.S. Principal Operations

PE Films

Locations in the U.S. Locations Outside the U.S. Principal Operations

Pottsville, Pennsylvania Guangzhou, China Production of plastic films

Flexible Packaging Films

Locations in the U.S. Locations Outside the U.S. Principal Operations

Item 3. LEGAL PROCEEDINGS

The information required by this Item 3 is set forth in Note 16 "Contingencies" to the Consolidated Financial Statements in Item 15 and is hereby incorporated herein by reference.

11

Item 4. MINE SAFETY DISCLOSURES

None.

PART II

Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Tredegar’s common stock is traded on the New York Stock Exchange (“NYSE”) under the ticker symbol “TG”. There were 34,430,769 shares of common stock held by 1,559 shareholders of record on March 8, 2024.

Dividend Information

Prior to the third quarter of 2023, Tredegar paid a regular cash dividend every quarter since becoming a public company in July 1989. Under the ABL Facility, the Company is prohibited from making dividend payments during the fiscal quarters ending September 30, 2023 through December 31, 2024. See Note 7 “Debt and Credit Agreements” to the Consolidated Financial Statements in Item 15 for more information on the Company’s ABL Facility.

All decisions with respect to the declaration and payment of future dividends will be made by the Board in its sole discretion based upon earnings, financial condition, anticipated cash needs and other such considerations as the Board deems relevant.

Issuer Purchases of Equity Securities

On January 7, 2008, Tredegar announced that the Board approved a share repurchase program whereby management is authorized at its discretion to purchase, in the open market or in privately negotiated transactions, up to 5 million shares of the Company’s outstanding common stock. The authorization has no time limit. Tredegar did not repurchase any shares in the open market or otherwise in 2023, 2022 or 2021 under this standing authorization. The maximum number of shares remaining under this standing authorization was 1,732,003 at December 31, 2023. Under the ABL Facility, the Company is prohibited from making share repurchases during the fiscal quarters ending September 30, 2023 through December 31, 2024.

12

Stock Performance Graph

The following graph compares cumulative total shareholder returns for Tredegar, the S&P SmallCap 600 Stock Index (an index comprised of companies with market capitalizations similar to Tredegar) and the Russell 2000 Index for the five years ended December 31, 2023. Tredegar is part of both the S&P SmallCap 600 Index and Russell 2000 Index.

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*

Among Tredegar Corporation, the S&P SmallCap 600 Index, and the Russell 2000 Index

13

Item 6. [RESERVED]

Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion and analysis of our financial condition and results of operations focuses on and is intended to clarify the results of our operations, certain changes in our financial position, liquidity, capital structure and business developments for the periods covered by the consolidated financial statements included in this Form 10-K. This discussion should be read in conjunction with, and is qualified by reference to, the other related information including, but not limited to, the audited consolidated financial statements (including the notes thereto) and the description of our business, all as set forth in this Form 10-K, as well as the risk factors discussed above in Item 1A.

This section provides discussion and a year-to-year comparison for the years ended December 31, 2023 and 2022.

Business Overview

General

Tredegar Corporation is an industrial manufacturer with three primary businesses: custom aluminum extrusions for the North American B&C, automotive and specialty end-use markets through its Aluminum Extrusions segment; surface protection films for high-technology applications in the global electronics industry through its PE Films segment; and specialized polyester films primarily for the Latin American flexible packaging market through its Flexible Packaging Films segment. With approximately 1,900 employees, the Company operates manufacturing facilities in North America, South America, and Asia.

EBITDA from ongoing operations is the measure of segment profit and loss used by Tredegar’s chief operating decision maker (“CODM”) for purposes of assessing financial performance. The Company uses sales less freight (“net sales”) as its measure of revenues from external customers at the segment level. This measure is separately included in the financial information regularly provided to the CODM.

Earnings before interest and taxes (“EBIT”) from ongoing operations is a non-GAAP financial measure included in the reconciliation of segment financial information to consolidated results for the Company in Note 13 “Business Segments” to the Consolidated Financial Statements in Item 15. EBIT is not intended to represent the stand-alone results for Tredegar's ongoing operations under GAAP and should not be considered as an alternative to net income (loss) as defined by GAAP. We believe that EBIT is a widely understood and utilized metric that is meaningful to certain investors and that including this financial metric in the reconciliation of management’s performance metric, EBITDA from ongoing operations, provides useful information to those investors that primarily utilize EBIT to analyze the Company’s core operations.

Sales were $704.8 million in 2023 compared to $938.6 million in 2022. Net income (loss) was $(105.9) million ($(3.10) per diluted share) in 2023, compared with net income (loss) of $28.5 million ($0.84 per diluted share) in 2022.

2023 Financial Results Highlights

•EBITDA from ongoing operations for Aluminum Extrusions of $38.0 million was $28.8 million lower than the year of 2022.

•EBITDA from ongoing operations for PE Films of $11.2 million was $0.7 million lower than the year of 2022.

•EBITDA from ongoing operations for Flexible Packaging Films of $4.4 million was $23.1 million lower than the year of 2022.

Gains and losses associated with exit and disposal activities, plant shutdowns, asset impairments, restructurings and other items are described in Results of Operations below.

14

Results of Operations

2023 versus 2022

The following table presents a bridge of consolidated net income (loss) from the year of 2022 to the year of 2023 with related management’s discussion and analysis below the table.

(In thousands)

Net income (loss) for the year ended December 31, 2022 $ 28,455

Income tax expense (benefit) 4,389

Income (loss) before income taxes for the year ended December 31, 2022 32,844

Change in income (loss) from increases (decreases) in the following items:

Other income (expense), net (3,156)

Change in income (loss) from (increases) decreases in the following items:

Selling, general and administrative 2,583

Research and development 2,453

Interest expense (6,617)

Pension settlement loss (92,291)

Goodwill impairment (34,891)

Income (loss) before income taxes for the year ended December 31, 2023 (160,030)

Income tax expense (benefit) (54,125)

Net income (loss) for the year ended December 31, 2023 $ (105,905)

Sales in 2023 decreased by 24.9% compared with 2022. Net sales decreased 25.6% in Aluminum Extrusions primarily due to lower sales volume and the pass-through of lower metal costs. Net sales decreased 21.3% in PE Films primarily due to lower volume in Surface Protection, resulting from weak demand in the consumer electronics market and customer inventory corrections during 2023. Net sales decreased in Flexible Packaging Films by 24.9% primarily due to lower sales volume and lower margin that the Company believes are driven by excess global capacity and competition in Brazil from imports, partially offset by favorable product mix. For more information on changes in net sales and volume, see the Segment Operations Review section below.

Other income (expense), net was $(2.1) million in 2023 compared to $1.0 million in 2022. The change in other income (expense), net was primarily due a $2.0 million charge to adjust the initial purchase price of the nonparticipating single premium group annuity contract as a result of the routine administrative process to transition the pension plan. Also, there was cash consideration of $0.3 million received in January 2023 compared to $1.4 million received in May 2022 related to customary post-closing adjustments on the sale of the investment in kaleo, Inc., which was sold in December 2021. See Note 9 “Other Income (Expense), net” to the Consolidated Financial Statements in Item 15 for additional information.

Consolidated gross profit (sales minus cost of goods sold and freight) as a percentage of sales (gross profit margin) was 11.2% in 2023 versus 14.9% in 2022.

•The gross profit margin in Aluminum Extrusions decreased primarily due to: lower volume; higher labor and employee-related costs; lower labor productivity in the first half of 2023; higher supply expense (including higher paint expense associated with a shift to more painted product throughout 2023 and inflationary costs for other supplies); and higher freight rates; partially offset by higher pricing (primarily in the first quarter of 2023); lower utility costs; and favorable LIFO inventory adjustments in 2023 versus 2022. Additionally, the timing of the flow through under the first-in first-out method of aluminum raw material costs passed through to customers, previously acquired at higher prices in a quickly changing commodity pricing environment, resulted in a charge of $1.1 million in 2023 versus a benefit of $0.1 million in 2022.

•The gross profit margin in PE Films increased primarily due to higher overwrap films contribution margin associated with higher volume and favorable mix, cost improvements and favorable LIFO inventory adjustments for both Surface

15

Protection and overwrap films in 2023 versus 2022, partially offset by lower contribution margin for Surface Protection associated with a market slowdown, customer inventory corrections for non-transitioning products and for previously disclosed customer product transitions.

•The gross profit margin in Flexible Packaging Films decreased primarily due to lower sales volume, lower selling prices from the pass-through of lower resin costs and margin pressures and higher fixed and variable costs, partially offset by lower raw material costs.

For more information on changes in operating costs and expenses, see the Segment Operations Review section below.

As a percentage of sales, selling, general and administrative (“SG&A”) and R&D expenses were 11.3% in 2023 compared with 9.1% in 2022. While SG&A and R&D expenses decreased 3.3% and 39.5% year-over-year, sales decreased $233.7 million or 24.9% compared with the prior year period. Lower SG&A spending was primarily due to lower employee-related compensation and lower stock-based compensation, partially offset by higher professional fees associated with business development activities.

For more information on changes in interest expense, see the “Corporate Expenses, Interest and Other” section of the Segment Operations Review section below.

During 2023, the Company settled the pension plan, which resulted in a pre-tax pension settlement loss in the consolidated results of operation of $92.3 million. On November 3, 2023, the pension plan termination and settlement process was completed, and the Company’s relevant pension plan obligation was transferred to Massachusetts Mutual Life Insurance Company. See Note 8 “Retirement Plans and Other Postretirement Benefits” to the Consolidated Financial Statements in Item 15 for more information.

During 2023, a non-cash partial goodwill impairment of $34.9 million was recognized, see Note 1 “Nature of Operations and Summary of Significant Accounting Policies” to the Consolidated Financial Statements in Item 15 for more information.

The effective tax rate used to compute income taxes for the year of 2023 was 33.8%, compared to 13.4% in 2022. The increase in the effective tax rate is primarily due to tax benefits previously recorded in other comprehensive income (loss) that were released as a result of the pension plan termination, partially offset by a reduction in Brazilian tax incentives as a percentage of income. The stranded taxes released with the termination of the pension plan represent the effect of the change in federal and state tax rates on pension-related deferred tax items initially recorded in other comprehensive income. The related stranded taxes were released in full in 2023. See Note 12 “Income Taxes” to the Consolidated Financial Statements in Item 15 for additional information.

Pre-tax gains and losses associated with plant shutdowns, asset impairments, restructurings and other items in 2023 detailed below are shown in the statements of net sales and EBITDA from ongoing operations by segment table in Note 13 “Business Segments” to the Consolidated Financial Statements in Item 15 and are included in “Asset impairments and costs associated with exit and disposal activities, net of adjustments” in the consolidated statements of income, unless otherwise noted.

16

Aluminum Extrusions:

Other restructuring costs - severance $ — $ — $ 0.1 $ — $ 0.1

(Gains) losses from sale of assets, investment writedowns and other items:

Consulting expenses for ERP/MES project1 — — 1.2 0.6 1.8

Storm damage to the Newnan, Georgia plant1 0.6 (0.2) 0.1 — 0.5

Legal fees associated with the Aluminum Extruders Trade Case1 — — — 0.5 0.5

Total for Aluminum Extrusions $ 0.6 $ (0.2) $ 1.4 $ 1.1 $ 2.9

PE Films:

Richmond, Virginia Technical Center accelerated depreciation3 — — — 0.3 0.3

Richmond, Virginia Technical Center lease modification3 — — — (0.1) (0.1)

Flexible Packaging Films:

Other restructuring costs - severance $ 0.1 $ — $ — $ — $ 0.1

Total for Flexible Packaging Films $ 0.1 $ — $ — $ — $ 0.1

Corporate:

(Gain) losses from sale of assets, investment writedowns and other items:

Group annuity contract premium expense2 — — — 2.0 2.0

Average total debt outstanding and interest rates were as follows:

(In millions, except percentages) 2023 2022

Average total outstanding debt balance $ 152.3 $ 114.5

Average interest rate 7.2 % 3.5 %

17

Segment Operations Review

Aluminum Extrusions

A summary of results for Aluminum Extrusions is provided below:

Year Ended Favorable/

(In thousands, except percentages) December 31, (Unfavorable)

Ongoing operations:

Net sales in 2023 decreased 25.6% versus 2022 primarily due to lower sales volume and the pass-through of lower metal costs.

EBITDA from ongoing operations decreased $28.8 million in 2023 versus 2022, primarily due to:

•Lower volume ($29.6 million), higher labor and employee-related costs ($4.5 million), lower labor productivity in the first half of 2023 ($0.9 million), higher supply expense, including higher paint expense associated with a shift to more painted product throughout 2023 and inflationary costs for other supplies ($1.2 million), higher freight rates ($0.8 million) and higher SG&A expenses ($1.5 million); partially offset by higher pricing, primarily in the first quarter of 2023 ($4.0 million), and lower utility costs ($2.3 million);

•The timing of the flow-through under the FIFO method of aluminum raw material costs passed through to customers, previously acquired at higher prices in a quickly changing commodity pricing environment, resulted in a charge of $1.1 million in 2023 versus a benefit of $0.1 million in 2022; and

•Inventories accounted for under the last in, first out (“LIFO”)method resulted in a benefit of $1.2 million in 2023 versus a charge of $2.9 million in 2022. In addition, the Company recorded an unfavorable out-of-period adjustment of $0.6 million related to inventory and accrued labor costs in the third quarter and fourth quarters of 2022.

Aluminum Extrusions believes that it has adequate supply agreements for aluminum raw materials in 2024. See discussion of quantitative and qualitative disclosures about market risk in Item 7A in this Form 10-K for additional information on aluminum price trends.

Projected Capital Expenditures and Depreciation & Amortization

Capital expenditures for Bonnell Aluminum are projected to be $9 million in 2024, including $4 million for productivity projects and $5 million for capital expenditures required to support continuity of operations. The projected spending reflects stringent spending measures that the Company has implemented to control its financial leverage (see the Liquidity and Capital Resources section for more information). The multi-year implementation of the new ERP/MES has been reorganized with an extended implementation period. As a result, the earliest “go-live” date for the new ERP/MES is 2025. The ERP/MES project commenced in 2022, with spending to-date of approximately $21 million. Depreciation expense is projected to be $16 million in 2024. Amortization expense is projected to be $2 million in 2024.

18

PE Films

A summary of results for PE Films is provided below:

Year Ended Favorable/

(In thousands, except percentages) December 31, (Unfavorable)

Ongoing operations:

Depreciation & amortization (6,522) (6,280) (3.9) %

Net sales in 2023 decreased 21.3% versus 2022, primarily due to lower volume in Surface Protection, resulting from weak demand in the consumer electronics market and customer inventory corrections during 2023. Sales volume in 2023 for surface protection films declined 22% and increased 2% for overwrap films versus 2022.

EBITDA from ongoing operations in 2023 decreased $0.7 million versus 2022 primarily due to:

•A $5.7 million decrease from Surface Protection:

◦Lower contribution margin for non-transitioning products associated with a market slowdown and customer inventory corrections ($11.1 million) and for previously disclosed customer product transitions ($0.7 million), partially offset by favorable pricing ($0.5 million), operating efficiencies ($2.6 million) and cost improvements ($3.2 million);

◦The pass-through lag associated with resin costs ($0.3 million charge in 2023 versus a benefit of $0.5 million in 2022);

◦A foreign currency transaction gain of $0.2 million in 2023 versus a gain of $0.8 million in 2022; and

◦Inventories accounted for under the LIFO method resulted in a benefit of $1.0 million in 2023 versus a charge of $0.1 million in 2022.

•A $5.0 million increase from overwrap films primarily due:

◦Higher contribution margin associated with higher volume and favorable mix ($1.3 million), cost improvements ($3.1 million) and lower SG&A ($0.4 million);

◦The pass-through lag associated with resin costs (a charge of $0.2 million in 2023 versus a benefit of $0.4 million in 2022); and

◦Inventories accounted for under the LIFO method resulted in a benefit of $0.3 million in 2023 versus a charge of $0.4 million in 2022.

In August 2023, the Company adopted a plan to close the PE Films technical center in Richmond, VA and reduce its efforts to develop and sell films supporting the semiconductor market. Future research and development activities for PE Films will be performed at the facility in Pottsville, PA. PE Films continues to have new business opportunities primarily relating to surface protection films that protect components of flat panel and flexible displays. The Company anticipates all activities to cease at the PE Films technical center in Richmond, VA, by the end of the first quarter of 2024. The Company recognized total expense incurred through December 31, 2023 associated with exit activities of $1.3 million for: (i) severance and related costs ($0.9 million) and (ii) building closure costs ($0.4 million). In addition, the Company recognized a non-cash asset impairment ($3.5 million), accelerated depreciation ($0.3 million) and a gain on the lease modification ($0.1 million). Net annual cash savings of $3.4 million are anticipated, which began in the fourth quarter of 2023.

Projected Capital Expenditures and Depreciation & Amortization

Capital expenditures for PE Films are projected to be $2 million in 2024, including $1 million for productivity projects and $1 million for capital expenditures required to support continuity of current operations. Depreciation expense is projected to be $6 million in 2024. There is no amortization expense for PE Films.

19

Flexible Packaging Films

A summary of results for Flexible Packaging Films is provided below:

Year Ended Favorable/(Unfavorable)% Change

(In thousands, except percentages) December 31,

Ongoing operations:

Net sales in 2023 decreased 24.9% compared to 2022, primarily due to lower sales volume and lower margin that the Company believes were driven by excess global capacity and competition in Brazil from imports, partially offset by favorable product mix.

EBITDA from ongoing operations in 2023 decreased by $23.1 million versus 2022, primarily due to:

•Lower selling prices from the pass-through of lower resin costs and margin pressures ($17.6 million), lower sales volume ($9.7 million), higher fixed costs ($1.0 million, primarily due to under absorption from lower production volumes) and higher variable costs ($1.3 million, including higher costs resulting from quality issues), partially offset by lower raw material costs ($5.9 million) and lower SG&A expenses ($2.3 million);

•Foreign currency transaction losses ($0.3 million) in 2023 compared to foreign currency transaction losses ($0.2 million) in 2022; and

•Net unfavorable foreign currency translation of Real-denominated operating costs ($1.4 million) in 2023 versus 2022.

Projected Capital Expenditures and Depreciation & Amortization

Capital expenditures are projected to be $4 million in 2024, for capital expenditures required to support continuity of current operations. Depreciation expense is projected to be $3 million in 2024. Amortization expense is projected to be $0.1 million in 2024.

Corporate Expenses, Interest and Other

Corporate expenses, net in 2023 decreased by $1.8 million compared to 2022, primarily due to lower pension expense as a result of the pension plan termination completed in 2023 ($3.7 million), lower accruals for employee-related compensation ($2.1 million) and lower stock-based compensation ($1.4 million), partially offset by higher professional fees associated with business development activities ($3.2 million) and a charge to adjust the initial purchase price of the nonparticipating single premium group annuity contract as a result of the routine administrative process to transition the pension plan ($2.0 million).

Interest expense was $11.6 million in 2023 in comparison to $5.0 million in 2022, primarily due to higher weighted average total debt outstanding, higher interest rates and the write-off of $1.1 million of deferred financing fees.

Status of Current Corporate Strategic Initiatives

The status of current corporate strategic initiatives is as follows:

Agreement to Sell Terphane

On September 1, 2023, the Company announced that it had entered into a definitive agreement to sell Terphane to Oben Group (the “Contingent Terphane Sale”). Completion of the sale is contingent upon the satisfaction of customary closing conditions, including the receipt of certain competition filing approvals by authorities in Brazil and Colombia. On October 27, 2023, the Company filed the requisite competition forms with the Administrative Council for Economic Defense (“CADE”) in Brazil. The regulatory review process is ongoing and in line with the Company’s expectations. CADE’s maximum deadline for completing its review is no later than November 18, 2024. The merger review regarding the transaction was cleared by the Colombian authority in early February 2024.

As of December 31, 2023, the Company has reported results for Terphane as a continuing operation, given the early stage of the approval process by authorities. If the Contingent Terphane Sale transaction is completed, the Company expects to realize after-tax cash proceeds of $85 million after deducting projected Brazil withholding taxes, escrow funds, U.S. capital

20

gains taxes and transaction costs. Actual after-tax net proceeds may differ from this estimate due to possible changes in deductions and the Company's tax situation during the potentially lengthy interim period to the closing date.

Pension Plan Termination

On September 27, 2023, the Company borrowed $30 million under the Prior Credit Agreement (as defined below) in anticipation of the final funding expected for terminating its defined benefit pension plan obligation. OnOctober 31, 2023, the Company used this cash to contribute $27.7 million to fully fund the pension plan with the amount necessary to purchase from Massachusetts Mutual Life Insurance Company a nonparticipating single premium group annuity contract for $157.5 million, subject to final premium adjustments. On November 3, 2023, the pension plan termination and settlement process was completed, and the Company’s relevant pension plan obligation was transferred to Massachusetts Mutual Life Insurance Company. This completed the pension plan termination process that began in February 2022. During 2023, the Company recognized a pre-tax pension settlement loss of $92.3 million.

Liquidity and Capital Resources

The Company continuously focuses on working capital management. Measures such as days sales outstanding (“DSO”), days inventory outstanding (“DIO”) and days payables outstanding (“DPO”) are used to evaluate changes in working capital. Changes in operating assets and liabilities from December 31, 2022 to December 31, 2023 are summarized below.

•Accounts and other receivables decreased $16.6 million or 19.6%.

◦Accounts and other receivables in Aluminum Extrusions decreased $15.4 million primarily due to lower sales volume and the pass-through of lower metal costs. DSO (computed using trailing 12 months net sales and a rolling 12-month average of accounts and other receivables balances) was approximately 45.1 days in 2023 and 48.7 days in 2022.

◦Accounts and other receivables in PE Films increased $0.6 million primarily due to higher sales volume in overwrap films, partially offset by lower sales volume in Surface Protection. DSO was approximately 26.3 days in 2023 and 30.3 days in 2022.

◦Accounts and other receivables in Flexible Packaging Films decreased $1.9 million primarily due to lower sales. DSO was approximately 38.1 days in 2023 and 41.1 days in 2022.

•Inventories decreased $45.7 million or 35.8%.

◦Inventories in Aluminum Extrusions decreased $24.1 million primarily due to decreased raw material levels which align to lower demand and strict working capital targets, partially offset by a LIFO inventory benefit of $1.2 million in 2023 versus a charge of $2.9 million in 2022. DIO (computed using trailing 12 months costs of goods sold calculated on a FIFO basis and a rolling 12-month average of inventory balances calculated on the FIFO basis) was approximately 51.6 days in 2023 and 53.6 days in 2022.

◦Inventories in PE Films decreased $1.9 million due to lower raw materials costs, partially offset by a LIFO inventory benefit of $1.3 million in 2023 versus a charge of $0.5 million in 2022. The DIO was approximately 57.2 days in 2023 and 66.8 days in 2022.

◦Inventories in Flexible Packaging Films decreased $19.7 million primarily due to lower raw material purchases, lower work-in-process and finished goods levels as a result of lower sales volume. DIO of approximately 117.7 days in 2023 was higher compared to 108.0 days for 2022 due to the lower 12-month average of costs of goods sold as a result of lower sales volume and lower margin that the Company believes are driven by excess global capacity and competition in Brazil from imports.

•Net property, plant and equipment decreased by $3.0 million or 1.6% primarily due to depreciation expense ($25.8 million) and the impairment of assets from the closure of the Richmond, VA technical center ($3.5 million), partially offset by capital expenditures ($25.6 million).

•Identifiable intangible assets, net decreased by $1.8 million or 15.7% primarily due to amortization expense.

•Deferred income tax assets increased $11.1 million or 80.1% primarily due to an increase in net operating loss, tax credit and interest limitation carryforwards. Deferred tax liabilities related to intangible amortization and depreciation decreased $11.8 million while deferred taxes assets related to pension, employee benefits and inventory decreased $10.6 million. See Note 12 “Income Taxes” to the Consolidated Financial Statements in Item 15 for additional information.

•Accounts payable decreased by $19.9 million or 17.3%.

◦Accounts payable in Aluminum Extrusions decreased $15.7 million, primarily due to lower raw material purchases to align with demand and strict working capital targets. DPO (computed using trailing 12 months costs of goods sold calculated on a FIFO basis and a rolling 12-month average of accounts payable balances) was approximately 49.8 days in 2023 and 64.2 days in 2022.

21

◦Accounts payable in PE Films remained relatively flat. DPO of approximately 43.4 days in 2023 was lower compared to 51.0 days for 2022 due to lower raw materials associated with overwrap films.

◦Accounts payable in Flexible Packaging Films decreased $3.9 million, primarily due to lower raw material purchases, lower work-in-process, and finished goods levels as a result of lower sales volume. DPO was approximately 61.7 days in 2023 and 72.4 days in 2022.

Net cash provided by operating activities was $24.0 million in 2023 compared to net cash used in operating activities of $20.8 million in 2022. The change in operating activities is primarily due to pension plan contributions of $27.7 million in 2023 compared to $50 million in 2022 and improved working capital due to factors discussed earlier in this section relating to accounts and other receivables, inventories and accounts payable.

Net cash used in investing activities was $26.2 million in 2023 compared to $35.5 million in 2022. The change in investing activities is primarily due to lower capital expenditure spending ($10.4 million).

Net cash used in financing activities was $4.5 million in 2023 compared to net cash provided by financing activities of $45.4 million in 2022. The change in financing activities is primarily due to lower net borrowings ($55.6 million) under the ABL Facility and the Prior Credit Agreement and Terphane Brazil Loan (defined below), higher deferred financing costs ($2.8 million), partially offset by lower dividends paid in 2023 ($8.1 million).

At December 31, 2023, Tredegar had cash, cash equivalents and restricted cash of $13.5 million, including funds held in locations outside the U.S. of $9.8 million.

Debt and Credit Agreements

ABL Facility

On August 3, 2023, the Company entered into Amendment No. 2 to the Second Amended and Restated Credit Agreement (collectively the “Prior Credit Agreement”), which amended the financial covenants and decreased aggregate borrowings from $375 million to $200 million.

On December 27, 2023, the Company entered into Amendment No. 3 (the “ABL Facility”) to the Prior Credit Agreement, which provides the Company with $180 million senior secured asset-based revolving credit facility that will expire on June 30, 2026. The ABL Facility is secured by substantially all assets of the Company and its domestic subsidiaries, including equity in certain material first-tier foreign subsidiaries. Availability for borrowings under the ABL Facility is governed by a borrowing base, determined by the application of specified advance rates against eligible assets, including a portion of trade accounts receivable, inventory, cash and cash equivalents, owned real properties, and owned machinery and equipment. Upon the earlier of March 31, 2025 or the date the Company receives the proceeds from the sale of Terphane (the “ABL Adjustment Date”), the $180 million ABL Facility will be reduced to $125 million. As of December 31, 2023, availability under the ABL Facility was $22.9 million, after reducing the availability by the aggregate outstanding borrowings of $126.3 million, standby letters of credit of $13.1 million and the Minimum Liquidity (as defined in the ABL Facility) financial covenant.

Under the terms of the ABL Facility, certain domestic bank accounts are subject to blocked account agreements, each of which contains a springing feature whereby the lenders may exercise control over those accounts during a cash dominion period (any such period, a “Cash Dominion Period”). A Cash Dominion Period was implemented on the date of the closing of the ABL Facility and will remain in effect at all times prior to the ABL Adjustment Date. After the ABL Adjustment Date, a Cash Dominion Period goes into effect if availability under the ABL Facility falls below 12.5% or an Event of Default (as defined in the ABL Facility) occurs. The Company would then be subject to the Cash Dominion Period until the Event of Default is waived or ABL Facility availability is above 12.5% of the $125 million aggregate commitment for 30 consecutive days. Receipts that have not yet been applied to the ABL Facility are classified as restricted cash in the Company’s consolidated balance sheets.

22

The financial covenants in the ABL Facility, which are reported to lenders on a monthly basis, include:

•Until the ABL Adjustment Date, the Company is required to maintain (i) minimum Credit EBITDA (as defined in the ABL Facility), as of the end of each fiscal month for the 12-month period then ended (presented below) and (ii) a Minimum Liquidity (as defined in the ABL Facility) of $10.0 million.

Minimum Credit EBITDA (In thousands)

•Following the ABL Adjustment Date, the foregoing financial covenants will cease to exist and will be replaced with a minimum fixed charge coverage ratio of 1.00:1.00 that will be triggered in the event that availability is less than 10% of $125 million commitment amount and continuing thereafter until availability is greater than 10% of the $125 million commitment amount for 30 consecutive days.

23

The computation of Credit EBITDA, as defined in the ABL Facility, is presented below.

Plus:

After-tax losses related to discontinued operations —

Total income tax expense for continuing operations —

Depreciation and amortization expense for continuing operations 27,683

Losses related to the application of the equity method of accounting —

Fees, costs and expenses incurred in connection with the amendment process —

Terphane sale transaction costs in an amount not to exceed $10,000 5,038

Minus:

After-tax income related to discontinued operations —

Total income tax benefits for continuing operations (54,125)

Interest income (522)

Income related to the application of the equity method of accounting —

24

The computation of the ABL Facility availability and Minimum Liquidity covenant, as defined in the ABL Facility, is presented below.

Year Ended

(In thousands, except percentages) December 31,

Maximum aggregate principal $ 180,000

ABL Facility outstanding debt (matures on June 30, 2026) 126,322

Outstanding standby letters of credit 13,080

ABL Facility availability $ 32,884

Minimum Liquidity covenant 10,000

ABL Facility availability in excess of Minimum Liquidity covenant $ 22,884

In addition to the financial covenants, the ABL Facility contains restrictive covenants, including covenants that restrict the Company’s ability to pay dividends and repurchase shares of its common stock.

As of December 31, 2023, the Company was in compliance with all debt covenants.

Terphane Brazil Loan

On October 26, 2023, Terphane Ltda., the Company’s wholly owned subsidiary in Brazil, borrowed $20 million secured by certain of its assets (“Terphane Brazil Loan”). This U.S. Dollar borrowing matures on October 30, 2028. The Company expects that the Terphane Brazil Loan will be repaid (and collateral released) upon the closing of the Contingent Terphane Sale. On October 26, 2023, the Company borrowed $20 million from Terphane Brazil (the “Intercompany Loan”) at the same interest rate as the Terphane Brazil Loan, thereby transferring the funds to the U.S. The Company will repay the Intercompany Loan in conjunction with the closing of the Contingent Terphane Sale.

For more information on the ABL Facility and the Terphane Brazil Loan, see Note 7 “Debt and Credit Agreements” to the Consolidated Financial Statements in Item 15.

The Company believes that existing borrowing availability, current cash balances and cash flow from operations will be sufficient to satisfy short term material cash requirements related to working capital, capital expenditure, and debt repayments for at least the next 12 months. In the longer term, liquidity will depend on many factors, including the results of operations, the timing and extent of capital expenditures, changes in operating plans, or other events that would cause the Company to seek additional financing in future periods. In addition, the completion of the Contingent Terphane Sale would provide additional liquidity.

Material Cash Requirements for Known Contractual and Other Obligations

The Company’s material cash requirements from known contractual and other obligations as of December 31, 2023 were as follows:

Debt and interest payments

As of December 31, 2023, the Company had outstanding debt from the ABL Facility of $126.3 million with contractual payments due in June 2026. Estimated future interest payments associated with the ABL Facility total $28.6 million, with $11.5 million payable within the next 12 months.

As of December 31, 2023, Terphane Ltda., the Company’s wholly owned subsidiary in Brazil, had outstanding debt of $20.0 million under the Terphane Brazil Loan. Estimated future interest payments associated with the Terphane Brazil Loan total $7.9 million, with $2.3 million payable within the next 12 months.

Capital expenditure commitments

See “Projected Capital Expenditures and Depreciation & Amortization” within “Segment Operations Overview” above in this Item 7 for discussion of the Company’s planned investment in capital expenditures in 2024, of which $1.2 million are contractual commitments that existed as of December 31, 2023.

Operating Leases

The Company enters into various operating leases primarily for real estate, office equipment and vehicles. See Note 4 “Leases” to the Consolidated Financial Statements in Item 15 for additional information.

25

Uncertain Tax Positions

As of December 31, 2023, unrecognized tax benefits on uncertain tax positions were $0.7 million. Tax payments resulting from the successful challenge by the taxing authority on uncertain tax positions taken by Tredegar would possibly result in the payment of estimated interest and penalties of $0.2 million if tax payments were made as a result of a successful challenge by the taxing authority on uncertain tax positions. Due to uncertainties in the timing of potential tax audits, the timing of the resolution of these positions is uncertain. Therefore, the Company is unable to make a reasonably reliable estimate of the timing of payments beyond 12 months. See Note 12 “Income Taxes” to the Consolidated Financial Statements in Item 15 for additional information.

Off-Balance Sheet Arrangements

The Company has no material off-balance sheet arrangements that have had or are reasonably likely to have a material current or future effect on its financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.

From time to time, the Company enters into transactions with third parties in connection with the sale of assets or businesses in which it agrees to indemnify the buyers or third parties involved in the transaction, or the sellers or third parties involved in the transaction agree to indemnify Tredegar, for certain liabilities or risks related to the assets or business. Also, in the ordinary course of business, the Company may enter into agreements with third parties for the sale of goods or services that may contain indemnification provisions. In the event that an indemnification claim is asserted, liability for indemnification would be subject to an assessment of the underlying facts and circumstances under the terms of the applicable agreement. Further, any indemnification payments may be limited or barred by a monetary cap, a time limitation, or a deductible or basket. For these reasons, the Company is unable to estimate the maximum potential amount of the potential future liability under the indemnity provisions of these agreements. Tredegar does, however, accrue for losses for any known contingent liability, including those that may arise from indemnification provisions, when future payment is probable and the amount is reasonably estimable. The Company discloses contingent liabilities if the probability of loss is reasonably possible and material.

Critical Accounting Policies and Estimates

The preparation of financial statements in accordance with GAAP requires the Company to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosures. Certain accounting policies, as described below, are considered "critical accounting policies" because they are particularly dependent on estimates made by management about matters that are inherently uncertain and could have a material impact on the Company’s consolidated financial statements. Estimates and judgments are based on historical experience, forecasted events and various other assumptions that management believes are reasonable under the circumstances. Actual results could differ significantly from those estimates under different assumptions and conditions. A summary of all of our significant accounting policies is included in Note 1 “Nature of Operations and Summary of Significant Accounting Policies” to the Consolidated Financial Statements in Item 15.

Impairment of Goodwill

The Company assesses goodwill for impairment when events or circumstances indicate that the carrying value may not be recoverable, or, at a minimum, on an annual basis (December 1st of each year). When assessing goodwill for impairment, accounting guidance allows the Company to first perform a qualitative assessment (“Step 0 analysis”), which evaluates certain qualitative factors, including macroeconomic conditions, industry and market considerations, cost factors and overall financial performance, as well as company and reporting unit factors. If the Company's Step 0 analysis indicates that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, then the Company would perform a quantitative impairment test (“Step 1 analysis”).

During 2023, uncertainty about the timing of a recovery in the consumer electronics market persisted, and manufacturers in the supply chain for consumer electronics continued to experience reduced capacity utilization and inventory corrections. In light of the limited visibility on the timing of a recovery and the expected adverse future impact to the Surface Protection business, coupled with a cautious outlook on new product development opportunities, the Company performed a Step 1 goodwill impairment analysis, as of June 30, 2023 and September 30, 2023, of the Surface Protection component of PE Films. The analyses concluded that the fair value of Surface Protection was less than its carrying value, thus a non-cash partial goodwill impairment of $34.9 million ($27.0 million after deferred income tax benefits) was recognized during 2023.

The Company estimated the fair value of Surface Protection by: (i) computing an estimated enterprise value (“EV”) utilizing the discounted cash flow method (the “DCF Method”), (ii) applying adjustments for any surplus or deficient working capital, (iii) adding cash and cash equivalents, and (iv) subtracting interest-bearing debt. The DCF Method was used, incorporating Surface Protection’s latest projections, which reflect updated expected market recovery levels, feasibility of launching new product applications, competitive pricing and cash flows associated with production efficiencies, as well as consideration of cost savings and inventory corrections.

26

Key financial assumptions utilized to determine the fair value of the reporting unit include revenue growth projections and a weighted average cost of capital assumption. At September 30, 2023, the effect of a ten percent decrease in the revenue growth projections and a one percent increase to the weighted average cost of capital assumption would further decrease the fair value of the reporting unit’s fair value by approximately $1 million. Further impairment to the Surface Protection reporting unit’s goodwill may be caused by factors outside the Company’s control, such as increasing competitive pricing pressures, weak consumer electronic market demand, lower than expected sales and profit growth rates, and various other factors. Given the uncertain demand for Surface Protections products, it is reasonably possible that the cash flow estimates used in deriving such fair value measurements may change in the future.

As of December 1, 2023, the Company’s reporting units with goodwill were Surface Protection in PE Films and Futura in Aluminum Extrusions. Both of these reporting units have separately identifiable operating net assets (operating assets including goodwill and identifiable intangible assets net of operating liabilities). The Company's Step 0 analysis of these reporting units concluded that it is more likely than not that the fair value of each reporting unit was greater than its carrying value. Therefore, the Step 1 quantitative goodwill impairment tests for these reporting units were not necessary. The Surface Protection and Futura reporting units had goodwill in the amounts of $22.4 million and $13.3 million, respectively, at December 31, 2023. See Note 1 “Nature of Operations and Summary of Significant Accounting Policies” to the Consolidated Financial Statements in Item 15 for additional information on the analysis of goodwill impairment.

Income Taxes

Current tax liabilities and assets are recognized for the estimated taxes payable or refundable, respectively, on the tax returns for the current year. Deferred tax assets and liabilities are determined based on differences between financial reporting and tax bases of assets and liabilities and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. Accordingly, accounting for income taxes represents the Company’s best estimate of various events and transactions. Tax laws are often complex and may be subject to differing interpretations by the taxpayer and the relevant governmental taxing authorities. In establishing a provision for income tax expense, Tredegar must make judgments and interpretations about the application of tax laws. The Company must also make estimates about when in the future certain items will affect taxable income in the various taxing jurisdictions.

A valuation allowance is recorded in the period when the Company determines that it is more likely than not that all or a portion of deferred income tax assets may not be realized. The establishment and removal of a valuation allowance requires the Company to consider all positive and negative evidence and make a judgmental decision regarding the amount of valuation allowance required as of a reporting date.

Tredegar may be required to change its provision for income taxes when estimates used in determining valuation allowances on deferred tax assets significantly change, or when new information indicates the need for adjustment in valuation allowances. Additionally, future events, such as changes in tax laws, tax regulations, or interpretations of such laws or regulations, could have an impact on the provision for income tax and the effective tax rate. Any such changes could significantly affect the amounts reported in the financial statements in the year these changes occur.

See Note 12 “Income Taxes” to the Consolidated Financial Statements in Item 15 for additional information on income taxes.

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Tredegar has exposure to the volatility of interest rates, polyethylene and polypropylene resin prices, PTA and MEG prices, aluminum ingot and scrap prices, energy prices, foreign currencies and emerging markets. See Liquidity and Capital Resources regarding interest rate exposures related to borrowings under the ABL Facility.

Profit margins in Aluminum Extrusions are sensitive to fluctuations in aluminum ingot and scrap prices as well as natural gas prices (natural gas is the principal energy source used to operate its casting furnaces). Changes in polyethylene resin prices and the timing of those changes could have a significant impact on profit margins in PE Films. Changes in polyester resin, PTA and MEG prices, and the timing of those changes, could have a significant impact on profit margins in Flexible Packaging Films. There is no assurance of the Company’s ability to pass through higher raw material and energy costs to its customers.

The purchase price of raw materials fluctuates on a monthly basis; therefore, Aluminum Extrusions pricing policies generally allow the Company to pass the underlying index cost of aluminum and certain alloys through to the vast majority of our customers so that we remain substantially neutral to metal pricing. In the normal course of business, Aluminum Extrusions enters into fixed-price forward sales contracts with certain customers for the sale of fixed quantities of aluminum extrusions at scheduled intervals. In order to hedge its exposure to aluminum price volatility (see the chart below) under these fixed-price arrangements, which generally have a duration of not more than 12 months, the Company enters into a combination of forward purchase commitments and futures contracts to acquire or hedge aluminum, based on the scheduled deliveries. See Note 10 “Derivatives” to the Consolidated Financial Statements in Item 15 for additional information.

27

The volatility of quarterly average aluminum prices is shown in the chart below.

The volatility of quarterly average natural gas prices is shown in the chart below.

28

The volatility of average quarterly prices of polyethylene resin in the U.S. (a primary raw material for PE Films products) is shown in the chart below:

The price of resin is driven by several factors, including supply and demand and the price of oil, ethylene and natural gas. Selling prices to customers are set considering numerous factors, including the expected volatility of resin prices. In certain situations, PE Films has index-based pass-through raw material cost arrangements with customers. However, under certain agreements, changes in resin prices are not passed through for a period of 90 days or more. In response to unprecedented cost increases and supply issues for polyethylene and polypropylene resin, Tredegar Surface Protection implemented a quarterly resin cost pass-through mechanism, effective July 1, 2021, for all products and customers not previously covered by such arrangements. Pricing on the remainder of the business is based upon raw material costs and supply/demand dynamics within the markets in which the Company competes.

29

Polyester resins, MEG and PTA used in flexible packaging films produced in Brazil are primarily purchased domestically, with other sources available mostly from Asia and the U.S. Given the nature of these products as commodities, pricing is derived from Asian pricing indexes. The volatility of the average quarterly prices for polyester fibers in Asia, which is representative of polyester resin (a primary raw material for Flexible Packaging Films) pricing trends, is shown in the chart below:

The volatility of average quarterly prices of PTA and MEG in Asia (raw materials used in the production of polyester resins produced by Flexible Packaging Films) is shown in the chart below:

30

The Company sells to customers in foreign markets through its foreign operations and through exports from U.S. plants. The percentage of sales and total assets for manufacturing operations related to foreign markets for 2023, 2022 and 2021 are as follows:

Net Sales Net Sales Net Sales

Canada 2 — — 2 — — 2 — —

Europe — — — — — — 1 — —

Tredegar attempts to match the pricing and cost of its products in the same currency and generally views the volatility of foreign currencies and the corresponding impact on earnings and cash flow as part of the overall risk of operating in a global environment (for additional information, see trends for the Brazilian Real and Chinese Yuan in the charts on the following page). Exports from the U.S. are generally denominated in U.S. Dollars. The Company’s foreign currency exposure on income from continuing foreign operations relates to the Chinese Yuan and the Brazilian Real.

PE Films is generally able to match the currency of its sales and costs for its product lines. For flexible packaging films produced in Brazil, selling prices and key raw material costs are principally determined in U.S. Dollars and are impacted by local economic conditions and local and global competitive dynamics. Flexible Packaging Films is exposed to foreign exchange translation risk (its functional currency is the Brazilian Real) because almost 90% of the sales of Terphane Ltda. and substantially all of its related raw material costs are quoted or priced in U.S. Dollars while its variable conversion, fixed conversion and sales, general and administrative costs before depreciation and amortization (collectively “Terphane Ltda. Operating Costs”) are quoted or priced in Brazilian Real. This mismatch, together with a variety of economic variables impacting currency exchange rates, causes volatility that could negatively or positively impact EBITDA from ongoing operations for Flexible Packaging Films.

The Company estimates annual net costs of R$139 million for the net mismatch translation exposure between Terphane Ltda.’s U.S. Dollar quoted or priced sales and raw material costs and underlying Brazilian Real quoted or priced Terphane Ltda. Operating Costs. Terphane Ltda. has outstanding foreign exchange average forward rate contracts to purchase Brazilian Real and sell U.S. Dollars to hedge its exposure. See Note 10 “Derivatives” to the Consolidated Financial Statements in Item 15 for more information on outstanding hedging contracts and this hedging program.

Tredegar estimates that the change in the value of foreign currencies relative to the U.S. Dollar on PE Films had an unfavorable impact on EBITDA from ongoing operations in PE Films of $0.6 million in 2023 compared to 2022.

31

Trends for the Brazilian Real and Chinese Yuan are shown in the chart below:

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The information required by this Item 8 is set forth in Item 15 and is hereby incorporated herein by reference.

Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

Item 9A.CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

In connection with the preparation of this Form 10-K, pursuant to Rule 13a-15(b) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), the Company carried out an evaluation with the participation of its management, including its Chief Executive Officer (principal executive officer) and Chief Financial Officer (principal financial officer), of the effectiveness of the design and operation of the Company’s disclosure controls and procedures (as defined under Rule 13a-15(e) and 15d-15(e) under the Exchange Act) as of December 31, 2023.

Based on the evaluation of our disclosure controls and procedures as of December 31, 2023, the Company’s Chief Executive Officer and Chief Financial Officer concluded that, as of such date, our disclosure controls and procedures were effective.

Management’s Report on Internal Control over Financial Reporting

The Company’s management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. The Company’s internal control over financial reporting is a process designed by or under the supervision of the Company’s Chief Executive Officer and Chief Financial Officer, and overseen by the Board of Directors, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with GAAP and includes policies and procedures that:

•Pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the Company’s assets;

•Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with GAAP, and that the Company’s receipts and expenditures are being made only in accordance with the authorization of its management and directors; and

32

•Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting is not intended to provide absolute assurance that a misstatement of the Company’s consolidated financial statements would be prevented or detected. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management conducted an evaluation of the effectiveness of the Company’s internal control over financial reporting using the criteria in Internal Control - Integrated Framework 2013 issued by the Committee of Sponsoring Organizations of the Treadway Commission (the “2013 COSO Framework”).Based on management’s assessment, the Company’s Chief Executive Officer and Chief Financial Officer concluded that the Company’s internal control over financial reporting was effective as of December 31, 2023.

The effectiveness of the Company’s internal control over financial reporting as of December 31, 2023, has been audited by KPMG LLP, an independent registered public accounting firm, as stated in their report, which is included in Item 15 “Exhibits and Financial Statement Schedules”.

Remediation of Previously Disclosed Material Weaknesses

As previously disclosed under “Item 9a – Controls and Procedures” in our annual report on Form 10-K for the period ended December 31, 2022, the Company did not sufficiently attract, develop, and retain competent resources to fulfill internal control responsibilities and did not have an effective information and communication process that identified and assessed the source of and controls necessary to ensure the reliability of information used in financial reporting.As a consequence of these material weaknesses, the Company did not effectively design, implement and operate process-level controls across its financial reporting processes.A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis.

During the year ended December 31, 2023, the Company, with the oversight of the Audit Committee of our Board of Directors, continued to design and implement measures pursuant to management’s overall internal controls over financial reporting remediation plan and also completed testing of the design and operating effectiveness of all remediated controls. The remediation efforts to date included the following:

•Performed walkthroughs of the Company’s financial reporting processes including identifying all information used within the Company’s control environment;

•Completed a comprehensive review of, and update to, the documentation of relevant processes with respect to the Company’s internal control over financial reporting;

•Developed internal control remediation plans to enhance controls for deficiencies associated with the material weaknesses above, including an assessment of personnel skills and experience related to the design and operation of internal control activities;

•Implemented all new and revised internal controls to address the previously identified deficiencies associated with the material weaknesses above;

•Expanded the internal control compliance department with personnel who have appropriate internal control experience and identified resources for control owner positions that had previously experienced turnover; and

•Executed a targeted training program to educate control owners on the requirements of internal control activities, including maintaining adequate documentary evidence for internal control activities.

Based on management’s evaluation of the effectiveness of the Company’s internal controls as of December 31, 2023, including newly remediated controls, management concluded that the Company’s internal control over financial reporting framework was effectively designed and operated effectively for a sufficient period of time to enable us to conclude that all previously identified material weaknesses have been remediated as of December 31, 2023.

Changes in Internal Control Over Financial Reporting

Except as noted above with respect to the completion of the steps in the remediation plan, there has been no change in the Company’s internal control over financial reporting during the year ended December 31, 2023, that has materially affected, or is reasonably likely to materially affect, its internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act).

Item 9B. OTHER INFORMATION

None.

33

Item 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS

None.

34

PART III

Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information concerning directors and persons nominated to become directors of Tredegar to be included in the Proxy Statement under the headings “Proposal 1: Election of Directors” and “Tredegar’s Board of Directors” is incorporated herein by reference.

The information concerning corporate governance to be included in the Proxy Statement under the headings “Board Meetings, Meetings of Independent Directors and Board Committees” and “Corporate Governance and Risk Oversight” is incorporated herein by reference.

Set forth below are the names, ages and titles of the Company’s executive officers:

Name Age Title

John M. Steitz 65 President and Chief Executive Officer

D. Andrew Edwards 65 Executive Vice President and Chief Financial Officer

Kevin C. Donnelly 49 Vice President, General Counsel and Corporate Secretary

John M. Steitz. Mr. Steitz was elected President and Chief Executive Officer effective March 19, 2019. He previously served as President and Chief Executive Officer of Addivant Corporation, a leading global supplier of antioxidants, intermediates, inhibitors, modifiers, UV stabilizers and other additives to the plastic and rubber industries, from March 2015 until January 2019, as President and Chief Operating Officer of PQ Corporation, a leading worldwide producer of specialty inorganic performance chemicals and catalysts, from October 2013 until March 2015, as President and Chief Executive Officer of Avantor Performance Materials, a global supplier of ultra-high-purity life sciences materials with strict regulatory and performance specifications, from September 2012 through September 2013, as President and Chief Operating Officer of Albemarle Corporation, a global specialty chemicals company, from March 2012 through August 2012, and as Chief Operating Officer and Executive Vice President of Albemarle from April 2007 until March 2012.

D. Andrew Edwards. Mr. Edwards was named Executive Vice President and Chief Financial Officer effective August 6, 2020. Mr. Edwards served as Vice President and Chief Financial Officer from July 20, 2015 until August 2020. He previously served as the Chief Financial Officer of United Sporting Companies, Inc., a wholesale distributor of outdoor sporting goods, from February 2013 until July 2015 and as Vice President, Controller and Chief Accounting Officer of Owens & Minor, Inc., a distributor of acute medical products, from April 2010 to February 2013 and as Acting Chief Financial Officer of Owens & Minor, Inc. from March 2012 to February 2013. Mr. Edwards also served as Vice President, Finance, of Owens & Minor, Inc. from December 2009 until April 2010. Mr. Edwards previously served as the Company’s Vice President, Chief Financial Officer and Treasurer from August 2003 to December 2009 and as the Company’s Vice President, Finance from November 1998 to August 2003. Mr. Edwards also served as the Company’s Treasurer from May 1997 to December 2009 and as the Company’s Controller from October 1992 until July 2000.

Kevin C. Donnelly. Mr. Donnelly was elected Vice President, General Counsel and Corporate Secretary effective January 1, 2021. He joined Tredegar in 2010 and served as its Associate General Counsel from 2013 to 2020. Prior to joining Tredegar, Mr. Donnelly was an associate at Hunton & Williams LLP (now Hunton Andrews Kurth LLP). He received a B.A. degree from the University of Richmond and a J.D. from the University of Virginia.

Tredegar has a Code of Conduct that applies to all of its directors, officers and employees (including its chief executive officer, chief financial officer and principal accounting officer) and has posted the Code of Conduct on its website. All amendments to or waivers from any provision of the Company’s Code of Conduct applicable to the chief executive officer, chief financial officer and principal accounting officer will be disclosed on the Company’s website. The Company’s internet address is www.tredegar.com.

Item 11. EXECUTIVE COMPENSATION

The information to be included in the Proxy Statement under the headings “Compensation of Directors,” “Compensation Discussion and Analysis,” “Executive Compensation Committee Report” and “Compensation of Executive Officers” is incorporated herein by reference.

Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT ANDRELATED STOCKHOLDER MATTERS

The information to be included in the Proxy Statement under the heading “Equity Compensation Plan Information” is incorporated herein by reference.

35

Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information to be included in the Proxy Statement under the headings “Certain Relationships and Related Transactions,” “Tredegar’s Board of Directors” and “Board Meetings, Meetings of Independent Directors and Board Committees” is incorporated herein by reference.

Item 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

Our independent registered public accounting firm is KPMG LLP, Richmond, Virginia, Audit Firm ID: 185.

The following is incorporated herein by reference:

•Information on accounting fees and services to be included in the Proxy Statement under the heading “Audit and Non-Audit Fees;” and

•Information on the Audit Committee’s procedures for pre-approving certain audit and non-audit services to be included in the Proxy Statement under the heading “Board Meetings, Meetings of Non-Management Directors and Board Committees—Audit Committee Matters.”

36

PART IV

Item 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(a) List of documents filed as a part of the report:

(1) Financial statements:

Tredegar Corporation

Index to Financial Statements and Supplementary Data

Page

Auditors’ Opinions:

Report of Independent Registered Public Accounting Firm 38

Opinion on Internal Control Over Financial Reporting 40

Financial Statements:

Consolidated Balance Sheets 41

Consolidated Statements of Income (Loss) 42

Consolidated Statements of Comprehensive Income (Loss) 43

Consolidated Statements of Cash Flows 44

Consolidated Statements of Shareholders' Equity 45

Notes to Financial Statements 46

(2) Financial statement schedules:

None

(3) Exhibit Index 74

37

Report of Independent Registered Public Accounting Firm

To the Shareholders and Board of Directors

Tredegar Corporation:

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of Tredegar Corporation and subsidiaries (the Company) as of December 31, 2023 and 2022, the related consolidated statements of income (loss), comprehensive income (loss), cash flows, and shareholders’ equity for each of the years in the three-year period ended December 31, 2023, and the related notes (collectively, the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2023 and 2022, and the results of its operations and its cash flows for each of the years in the three-year period ended December 31, 2023, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 31, 2023, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission, and our report dated March 15, 2024 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of a critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Goodwill impairment in the Surface Protection reporting unit

As discussed in Notes 1 and 5 to the consolidated financial statements, the Company’s goodwill balance as of December 31, 2023 was $35.7 million, including $22.4 million related to the Surface Protection reporting unit, within the PE Films reportable segment. The Company assesses goodwill for impairment when events or circumstances indicate that the carrying value may not be recoverable, or, at a minimum, on an annual basis (December 1st of each year). During the three months ended June 30, 2023 and September 30, 2023, events and circumstances indicated that the Surface Protection reporting unit might be impaired. The Company performed quantitative impairment tests of the Surface Protection reporting unit as of June 30, 2023 and September 30, 2023, and concluded that an impairment existed as of June 30, 2023 and September 30, 2023. Management estimated the fair value of the Surface Protection reporting unit utilizing the discounted cash flow method.

We identified the assessment of goodwill impairment of the Surface Protection reporting unit as a critical audit matter. The estimation of fair value of the reporting unit is complex and includes estimation uncertainties that required a higher level of subjective auditor judgment. Specifically, the revenue growth projections used in the discounted cash flow method required subjective and challenging auditor judgment as they represented subjective determinations of market and economic conditions. Additionally, the audit effort associated with the discount rate and the revenue growth projections required specialized skills

38

and knowledge. Changes to those assumptions could have had a significant effect on the Company’s estimate of the fair value of the reporting unit.

The following are the primary procedures we performed to address this critical audit matter. We evaluated the design and tested the operating effectiveness of certain internal controls related to the Company’s goodwill impairment assessment process, including controls over the selection of the discount rate and development of the revenue growth projections. We assessed the revenue growth projections by considering correspondence with customers, as well as the underlying business strategies and growth plans of the Company. We also evaluated the revenue growth projections by comparing them to third-party market data and to historical actual results. In addition, we involved valuation professionals with specialized skills and knowledge, who assisted in:

•evaluating the Company’s discount rate by comparing it to a discount rate that was independently developed using publicly available third-party market data for comparable entities

•evaluating the Company’s revenue growth projections by comparing them to projections that were independently developed using external market and industry data.

/s/ KPMG LLP

We have served as the Company’s auditor since 2018.

Richmond, Virginia

March 15, 2024

39

Report of Independent Registered Public Accounting Firm

To the Shareholders and Board of Directors

Tredegar Corporation:

Opinion on Internal Control Over Financial Reporting

We have audited Tredegar Corporation and subsidiaries' (the Company) internal control over financial reporting as of December 31, 2023, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2023, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 2023 and 2022, the related consolidated statements of income (loss), comprehensive income (loss), cash flows, and shareholders’ equity for each of the years in the three-year period ended December 31, 2023, and the related notes (collectively, the consolidated financial statements), and our report dated March 15, 2024 expressed an unqualified opinion on those consolidated financial statements.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control Over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ KPMG LLP

Richmond, Virginia

March 15, 2024

40

CONSOLIDATED BALANCE SHEETS

Tredegar Corporation and Subsidiaries

December 31

(In thousands, except share data)

Assets

Current assets:

Restricted cash 3,795 —

Property, plant and equipment, at cost:

Identifiable intangible assets, net 9,851 11,690

Liabilities and Shareholders’ Equity

Current liabilities:

Pension and other postretirement benefit obligations, net 6,643 35,046

Other non-current liabilities 4,119 5,834

Contingencies (Note 16)