SYPR · Read the filing

sypr20251231_10k.htm

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark one)

Commission file number 0-24020

SYPRIS SOLUTIONS, INC.

(Exact name of registrant as specified in its charter)

(State or other jurisdiction (I.R.S. Employer

of incorporation or organization) Identification No.)

(Address of principal executive (Registrant’s telephone number,

offices, including zip code) including area code)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class Trading Symbol Name of each exchange on which registered

Common Stock SYPR Nasdaq

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐ Yes ☒ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐ Yes ☒ No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☒ Yes ☐ No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ☒ Yes ☐ No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” or an “emerging growth company” in Rule 12b-2 of the Exchange Act.

☐ Emerging Growth Company

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Exchange Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to § 240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). ☐ Yes ☒ No

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold as of the last business day of the registrant’s most recently completed second fiscal quarter (June 29, 2025) was $28,274,420.

There were 23,029,970 shares of the registrant’s common stock outstanding as of March 10, 2026.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive Proxy Statement to be delivered to stockholders in connection with the Annual Meeting of Stockholders to be held June 16, 2026 are incorporated by reference into Part III to the extent described therein.

Table of Contents

Page

Part I

Item 1. Business 1

Item 1A. Risk Factors 8

Item 1B. Unresolved Staff Comments 18

Item 1C. Cybersecurity 18

Item 2. Properties 20

Item 3. Legal Proceedings 21

Item 4. Mine Safety Disclosures 21

Part II

Item 6. [Reserved] 22

Item 7A. Quantitative and Qualitative Disclosures About Market Risk 31

Item 8. Financial Statements and Supplementary Data 32

Item 9A. Controls and Procedures 64

Item 9B. Other Information 64

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 64

Part III

Item 10. Directors, Executive Officers and Corporate Governance 65

Item 11. Executive Compensation 65

Item 14. Principal Accounting Fees and Services 66

Part IV

Item 15. Exhibits and Financial Statement Schedules 67

Signature Page 70

In this Annual Report on Form 10-K, “Sypris,” “the Company,” “we,” “us” and “our” refer to Sypris Solutions, Inc. and its subsidiaries and predecessors, collectively. “Sypris Solutions” and “Sypris” are our trademarks. All other trademarks, servicemarks or trade names referred to in this Annual Report on Form 10-K are the property of their respective owners.

Forward-Looking Statements

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for forward-looking statements made by or on behalf of Sypris Solutions, Inc. (“Sypris”, the “Company”, “we”, “our”, or “us”). These statements are based on management's beliefs, as well as assumptions made by and information currently available to management. Forward-looking statements may be identified by words like “expect,” “anticipate,” “believe,” “plan,” “project,” “could,” “estimate,” “intend,” “may,” “will”, “in our view” and similar expressions, or the negative of such terms, or other comparable terminology. All forward-looking statements involve risks and uncertainties that are difficult to predict. In particular, any statement contained in this Annual Report on Form 10-K or in other documents filed with the Securities and Exchange Commission, in press releases, or in the Company's communications and discussions with investors and analysts in the normal course of business through meetings, phone calls, or conference calls regarding, among other things, the consummation and benefits of transactions, joint ventures, business combinations, divestitures and acquisitions, expectations with respect to future sales, financial performance, operating efficiencies, or product expansion, are subject to known and unknown risks, uncertainties, and contingencies, many of which are beyond the control of the Company. Various factors may cause actual results, performance, or achievements to differ materially from anticipated results, performance, or achievements expressed or implied by forward-looking statements. Briefly, we currently believe that such risks also include the following: the fees, costs and supply of, or access to, debt, equity capital, or other sources of liquidity; the termination or non-renewal of existing contracts by customers; our failure to achieve and maintain profitability on a timely basis by steadily increasing our revenues from profitable contracts with a diversified group of customers, which would cause us to continue to use existing cash resources or require us to sell assets to fund operating losses; volatility of our customers’ forecasts and our contractual obligations to meet current scheduling demands and production levels, which may negatively impact our operational capacity and our effectiveness to integrate new customers or suppliers, and in turn cause increases in our inventory and working capital levels; cost, quality and availability or lead times of raw materials such as steel, component parts (especially electronic components), natural gas or utilities including increased cost relating to inflation, as well as the impact of proposed or imposed tariffs by the U.S. government on imports to the U.S. and/or the imposition of retaliatory tariffs by foreign countries; our reliance on a few key customers, third party vendors and sub-suppliers; significant delays or reductions due to a prolonged continuing resolution or U.S. government shutdown reducing the spending on products and services that Sypris Electronics provides; risks of foreign operations, including foreign currency exchange rate risk exposure, which could impact our operating results; the cost, quality, timeliness, efficiency and yield of our operations and capital investments, including the impact of inflation, tariffs, product recalls or related liabilities, employee training, working capital, production schedules, cycle times, scrap rates, injuries, wages, overtime costs, freight or expediting costs; inventory valuation risks including excessive or obsolescent valuations or price erosions of raw materials or component parts on hand or other potential impairments, non-recoverability or write-offs of assets or deferred costs; our failure to successfully complete final contract negotiations with regard to our announced contract “orders”, “wins” or “awards”; our failure to successfully win new business or develop new or improved products or new markets for our products; adverse impacts of new technologies or other competitive pressures which increase our costs or erode our margins; the costs and supply of insurance on acceptable terms and with adequate coverage; unanticipated or uninsured product liability claims, disasters, public health crises, losses or business risks; breakdowns, relocations or major repairs of machinery and equipment, especially in our Toluca Plant; the costs of compliance with our auditing, regulatory or contractual obligations; pension valuation, health care or other benefit costs; dependence on, retention or recruitment of key employees and highly skilled personnel and distribution of our human capital; our reliance on revenues from customers in the oil and gas and automotive markets, with increasing consumer pressure for reductions in environmental impacts attributed to greenhouse gas emissions and increased vehicle fuel economy; war, geopolitical conflict, terrorism, or political uncertainty, or disruptions resulting from military hostilities between Russia and Ukraine, Israel and Hamas, and the U.S., Israel and Iran, or other tensions in the Middle East, including arising out of international sanctions, foreign currency fluctuations and other economic impacts; labor relations; strikes; union negotiations; disputes or litigation involving governmental, supplier, customer, employee, creditor, stockholder, premises liability, personal injury, product liability, warranty or environmental claims; failure to adequately insure or to identify product liability, environmental or other insurable risks; costs associated with environmental or other claims relating to properties previously owned; our inability to patent or otherwise protect our inventions or other intellectual property rights from potential competitors or fully exploit such rights which could materially affect our ability to compete in our chosen markets; changes in licenses, security clearances, or other legal rights to operate, manage our work force or import and export as needed; cybersecurity threats and disruptions, including ransomware attacks on our systems and the systems of third-party vendors and other parties with which we conduct business, all of which may become more pronounced in the event of geopolitical conflicts and other uncertainties, such as the conflict in Ukraine; our ability to maintain compliance with the Nasdaq listing standards minimum closing bid price; risks related to owning our common stock, including increased volatility; possible public policy response to a public health emergency, including U.S. or foreign government legislation or restrictions that may impact our operations or supply chain; or unknown risks and uncertainties. We undertake no obligation to update our forward-looking statements, except as may be required by law.

PART I

Item 1. Business

General

We were formed as a Delaware corporation in 1997. We provide products and engineering, design, and manufacturing services for a variety of critical infrastructure sectors, including energy, space, communications, defense, transport, chemical, and water. Sypris serves its customers globally through its operations located in North America. We produce a wide range of manufactured products, often under multi-year, sole-source contracts.

We focus on those markets where we believe we have the expertise, qualifications and leadership position to sustain a competitive advantage. We target our resources to support the needs of industry participants that embrace technological innovation and flexibility, coupled with multi-year contractual relationships, as a strategic component of their supply chain management. These contracts, many of which are sole-source by part number, have historically created opportunities to invest in leading-edge processes or technologies to help our customers remain competitive. The productivity and innovation that can result from such investments helps to differentiate us from our competition when it comes to cost, quality, reliability and customer service.

Our manufacturing processes frequently involve the fabrication or assembly of a product or subassembly according to specifications provided by our customers. We strive to enhance our manufacturing capabilities by advanced quality and manufacturing techniques, lean manufacturing, continuous flow manufacturing, six sigma, total quality management, stringent and real-time engineering change control routines and total cycle time reduction techniques. At the same time, we are working to develop new designs and product innovations by re-engineering traditional solutions to eliminate cost without reducing durability or quality.

Business Division Summary

We are organized into two business segments, Sypris Technologies and Sypris Electronics. Sypris Technologies, which is comprised of Sypris Technologies, Inc. and its subsidiaries, generates revenue primarily from the sale of forged, machined, welded and heat-treated steel components primarily for the heavy commercial vehicle and high-pressure energy pipeline applications. Sypris Electronics, which is comprised of Sypris Electronics, LLC, generates revenue primarily through circuit card and full “box build” manufacturing, high reliability manufacturing, systems assembly and integration, design for manufacturability and design to specification work.

Sypris Technologies. Through Sypris Technologies, we are a significant supplier of forged and machined components, serving the commercial vehicle, off highway vehicle, recreational vehicle, automotive, industrial and energy markets in North America. We have the capacity to produce drive train components including axle shafts, transmission shafts, gear sets, steer axle knuckles, and other components for ultimate use by the leading automotive, truck and recreational vehicle manufacturers, including General Motors Company (GM), Freightliner LLC (Freightliner), Mack Truck (Mack), Navistar International Corporation (Navistar), PACCAR, Inc. (PACCAR), Volvo Truck Corporation (Volvo) and Bombardier Recreational Products (BRP). We support our customers’ strategies to outsource non-core operations by supplying additional components and providing additional value added operations for drive train assemblies. We also design and manufacture high-pressure closures and other fabricated products for oil and gas, water pipelines and miscellaneous industrial applications.

Our manufacturing contracts for the truck components and assemblies markets are often sole-source by part number. Part numbers may be specified for inclusion in a single model or a range of models. Where we are the sole-source provider by part number, we are generally the exclusive provider to our customer of those specific parts for the duration of the manufacturing contract.

Sypris Technologies also manufactures energy-related products such as pressurized closures, insulated joints and other specialty products, primarily for oil and gas pipelines and related energy markets. These products are an important source of diversified revenues, which has become an area of greater focus for the Company. We are committed to exploring new product developments and potential new markets for our energy-related products, which will also be an increasing area of focus for the Company going forward.

Sypris Technologies represented approximately 43% of our net revenues in 2025.

Sypris Electronics. Sypris Electronics generates revenue primarily through circuit card and full box build manufacturing, high reliability manufacturing, systems assembly and integration, design for manufacturability and design to specification, for customers in the aerospace, defense, space and other high-reliability electronics markets. This includes circuit card assemblies for electronic sensors and systems including radar systems, tactical ground stations, navigation systems, weapons systems, targeting and warning systems and those used in the nation’s high priority space programs.

We provide our customers with a broad variety of value-added solutions, from low-volume prototype assembly to high-volume turnkey manufacturing. Our manufacturing contracts for the aerospace and defense electronics market are generally sole-source by part number. Our customers include large aerospace and defense companies such as Northrop Grumman Corporation (Northrop Grumman), Lockheed Martin (Lockheed), L3Harris Technologies (L3Harris), Collins Aerospace Systems (RTX Corporation), BAE Systems (BAE) and Analog Devices, Inc. (ADI). We serve as a subcontractor on U.S. government programs and do not serve as a prime contractor to the U.S. government.

The engineering and manufacturing of highly complex components for the aerospace and defense industries is a fragmented industry with no dominant player in the market. The industry has continued to grow with more companies developing printed circuit board assembly capabilities and others entering the market via mergers and acquisitions of smaller companies. The competitive business environment, together with evolving U.S. federal spending and Department of War (“DoW”) funding priorities, has influenced Sypris Electronics’ operating environment, even as demand across key defense and space markets has strengthened in recent periods.

During 2024 and 2025, we announced new program awards and releases for Sypris Electronics, with certain programs continuing into 2026. In addition to contract awards from DoW prime contractors related to weapons systems, electronic warfare and infrared countermeasures in our traditional aerospace and defense markets, we have also been awarded subcontracts for manufacturing services to the communication and navigation markets, which require our advanced capabilities for delivering products for complex, high cost of failure platforms.

The Administration published its FY 2026 budget request in June 2025. The budget request includes $848.3 billion in the base budget (discretionary) funding, and $113.3 billion in reconciliation (mandatory) funding for the DoW. The One Big Beautiful Bill Act passed the Senate and House and was signed by the President on July 4, 2025. The bill provides more than $150 billion in mandatory funding (inclusive of the $113.3 billion) for DoW available until September 30, 2029.

The National Defense Authorization Act (NDAA) for FY2026 was signed into law on December 18, 2025. This legislation authorizes $901 billion for defense spending which includes an $8 billion increase over the President’s DoW budget request. On November 12, 2025, the President signed into law a continuing resolution funding the DoW through January 30, 2026. On January 20, 2026, Congress unveiled its final appropriations package, which includes the Defense Appropriations Act conference report. This legislation provides $839.2 billion in funding for the DoW representing an $8.4 billion increase over the topline in the President’s DoW budget request. On February 3, 2026, the Consolidated Appropriations Act of 2026 was passed, which further extended government funding through September 30, 2026.

While the U.S. presidential administration has announced their proposal for a significant increase in defense spending in FY 2027, we anticipate the federal budget, debt ceiling and regulatory environment will continue to be subject to debate and compromise shaped by, among other things, the new U.S. presidential administration and Congress, heightened political tensions, the global security environment, inflationary pressures, and macroeconomic conditions. The result may be shifting funding priorities, which could have material impacts on defense spending broadly, and the effect on individual programs or our results cannot be predicted at this time. Additionally, the U.S. presidential administration continues to take steps to evaluate government-wide and defense-specific staffing and procurement, which includes assessing mission priorities, procurement methods, program performance, and other factors and then potentially taking action based on those assessments. The impact on demand for our products and services and our business are difficult to predict.

We expect to compete for follow-on business opportunities as a subcontractor on future builds of several existing government programs. However, the federal budget and debt ceiling are expected to continue to be the subject of considerable uncertainty and the impact on demand for our products and services and our business are difficult to predict.

Sypris Electronics accounted for approximately 57% of net revenue in 2025.

Our Markets

Sypris Technologies. The industrial manufacturing markets of this segment include automotive, truck and off-highway components and assemblies and specialty closures. The automotive, truck and off-highway components and assemblies market consists of the original equipment manufacturers, or OEMs, including FCA, Freightliner, GM, Mack, Navistar, PACCAR and Volvo, and an extensive supply chain of companies of all types and sizes that are classified into different levels or tiers. Tier 1 companies represent the primary suppliers to the OEMs and include Cummins Inc., Meritor, Detroit Diesel Corporation (Detroit Diesel), American Axle & Manufacturing Holdings, Inc. (America Axle) and Transmisiones y Equipos Mecanicos, S.A. de C.V. (Tremec), among others. Below this group of companies reside numerous suppliers that either supply the OEMs directly or supply the Tier I companies. In all segments of the truck components and assemblies market, however, suppliers are under intense competitive pressure to improve product quality and to reduce capital expenditures, production costs and inventory levels. The customers for our specialty closure products consists primarily of operators and builders of oil and gas pipelines, which are also facing significant pressures to improve quality, reduce costs and defer capital expenditures.

Sypris Electronics. Although we believe that our programs are well aligned with national defense and other priorities, shifts in domestic and international spending and tax policy, changes in security, defense and intelligence priorities, the affordability of our products, changes in or preferences for new or different technologies, general economic conditions, tariffs and other factors may affect the level of funding for existing or proposed programs.

Market conditions for our electronic manufacturing business are characterized by a number of factors. The nature of providing manufactured products to the aerospace and defense electronics industry as well as other regulated markets differs substantially from the commercial electronics manufacturing industry. The cost of failure can be significant, the manufacturing requirements are typically complex and products are produced in relatively small quantities. Companies within this industry are required to maintain and adhere to a number of strict and comprehensive certifications, security clearances and traceability standards.

Supply chain volatility has been the primary driver for disruptions in the electronics manufacturing market for the past several years. Certain electronic component price increases and extensive lead-time issues are prevalent in many of the segments in the electronic manufacturing industry that we serve. These increases and extended lead times are expected to continue for the foreseeable future. We are working with our customers to qualify alternative components or suppliers to mitigate the impact on our business. The majority of our aerospace and defense programs require specific components that are sole-sourced from specific suppliers; therefore, the resolution of supplier constraints requires coordination with our customers or the end-users of the products.

Our Business Strategy

Our objective is to improve our position in each of our core markets by increasing the number of multi-year relationships with customers and investing in highly innovative and efficient production capacity to remain competitive on a global scale. We intend to serve our customers and achieve this objective by continuing to:

Concentrate on our Core Markets. We are a significant supplier of forged, machined, welded and heat-treated components and subassemblies, serving the commercial vehicle, off highway vehicle, light truck and energy markets in North America. We have been an established supplier to major aerospace and defense companies and agencies of the U.S. Government for over 40 years. We will continue to focus on those markets where we have the expertise, capacity and qualifications to achieve a competitive advantage.

Dedicate our Resources to Support Strategic Partnerships. We will continue to prioritize our resources to support the needs of industry leaders that embrace multi-year contractual relationships as a strategic component of their supply chain management and have the potential for long-term growth. We prefer contracts that are sole-source by part number so we can work closely with the customer to the mutual benefit of both parties.

Pursue the Strategic Acquisition of Assets. Over the long-term, we may consider the strategic acquisition of assets to consolidate our position in our core markets, expand our presence outside the U.S., create or strengthen our relationships with leading companies and expand our range of products in return for multi-year supply agreements. We will consider assets that can be integrated with our core businesses and that can be used to support other customers, thereby improving asset utilization and achieving greater productivity, flexibility and economies of scale.

Grow Through the Addition of New Value-Added Manufacturing Capabilities. We hope to grow through the addition of new value-added manufacturing capabilities and the introduction of additional components in the supply chain that enable us to provide a more complete solution by improving quality and reducing product cost, inventory levels and cycle times for our customers. In many instances, we offer a variety of state-of-the-art machining capabilities to our customers in the industrial manufacturing markets that enable us to reduce labor and shipping costs and minimize cycle times for our customers over the long-term, which we believe will provide us with additional growth opportunities in the future.

We believe that the number and duration of our strategic customer relationships should grow to enable us to invest in our business with greater certainty and with less risk. The investments we make in support of these relationships are targeted to provide us with the productivity, flexibility, technological edge and economies of scale that we believe will help to differentiate us from the competition in the future when it comes to cost, quality, reliability and customer service.

Customer Concentration

Our five largest customers in 2025 were Northrop Grumman, Detroit Diesel, SubCom, LLC (SubCom), ADI and Sistemas Automotrices de Mexico, S.A de C.V. (Sistemas), which in the aggregate accounted for 63% of net revenue. Our five largest customers in 2024 were Northrop Grumman, Sistemas, Detroit Diesel, SubCom and ADI, which in the aggregate accounted for 70% of net revenue. In 2025, Northrop Grumman, Detroit Diesel and SubCom, represented approximately 23%, 13% and 11% of our net revenue, respectively. In 2024, Northrop Grumman, Sistemas, and Detroit Diesel, represented approximately 23%, 21% and 11% of our net revenue, respectively. No other customer accounted for more than 10% of our net revenue in 2025 or 2024.

Geographic Areas and Currency Fluctuations

Our operations are located in the U.S. and Mexico. Our Mexican subsidiary is a part of Sypris Technologies and manufactures and sells a number of products similar to those Sypris Technologies produces or previously produced in the U.S. In addition to normal business risks, operations outside the U.S. may be subject to a greater risk of changing political, economic and social environments, changing governmental laws and regulations, currency revaluations and market fluctuations. Fluctuations in foreign currency exchange rates have primarily impacted our earnings only to the extent of remeasurement gains or losses related to U.S. dollar denominated accounts of our foreign subsidiary, because the vast majority of our transactions are denominated in U.S. dollars. For each of the years ended December 31, 2025 and 2024, “other (income) expense, net” included foreign currency translation losses of less than $0.3 million.

Net revenues from our Mexican operations were $31.7 million, or 26%, and $53.3 million, or 38%, of our consolidated net revenues in 2025 and 2024, respectively. In 2025, net loss from our Mexican operations was $0.1 million, as compared to our consolidated net loss of $6.3 million. In 2024, net income from our Mexican operations was $2.6 million, as compared to our consolidated net loss of $1.7 million. You can find more information about our regional operating results, including our export sales, in Note 21 to our consolidated financial statements included in Item 8 of this Annual Report on Form 10-K.

Sales and Business Development

Our principal sources of new business originate from the expansion of existing relationships, referrals and direct sales through senior management, direct sales personnel, domestic and international sales representatives, distributors and market specialists. We supplement these selling efforts with a variety of sales literature, advertising in trade media and participating in trade shows. We also utilize engineering specialists to facilitate the sales process by working with potential customers to reduce the cost of the products they need. Our specialists achieve this objective by working with the customer to improve their product’s design for ease of manufacturing or by reducing the amount of set-up time or material that may be required to produce the product. The award of contracts or programs can be a lengthy process, which in some circumstances can extend well beyond 24 months. Upon occasion, we commit resources to potential contracts or programs that we ultimately do not win.

Our objective is to increase the value we provide to the customer on an annual basis beyond the contractual terms that may be contained in a supply agreement. To achieve this objective, we commit to the customer that we will continuously look for ways to reduce the cost, improve the quality, reduce the cycle time and improve the life span of the products we supply the customer. Our ability to deliver on this commitment over time is expected to have a significant impact on customer satisfaction, loyalty and follow‐on business.

We have signed long-term supply agreements with Detroit Diesel, Volvo, Tremec and Sistemas. We have launched the Sypris Ultra® axle shaft with Detroit Diesel and have strong interest from others within the customer base who are interested in this patented product. We are continuing to explore other opportunities as they arise and have a significant number of outstanding quotations in progress, but there can be no assurances that our efforts to develop new sources of revenues will be successful.

Competition

The markets that we serve are highly competitive, and we compete against numerous domestic and international companies in addition to the internal capabilities of some of our customers. In the industrial manufacturing markets, we compete primarily against other component suppliers such as Ramkrishna Forgings Limited, Mid-West Forge, Inc., GNA Axles Limited, Brunner International, Inc., Bharat Forge, Commercial Forged Products, Spencer Forge and Machine, Inc., Traxle, T.D. Williamson Inc. and National Oilwell Varco, Inc., certain of which serve as suppliers to many Tier I and smaller companies. In the aerospace and defense electronics market, we compete primarily against other component suppliers such as Celestica Inc., Jabil Circuit, Inc. and Spartronics. We may face new competitors in the future as the outsourcing industry evolves and existing or start-up companies develop capabilities similar to ours. In addition, we will face new competitors as we attempt to increase and expand our business.

We believe that the principal competitive factors in our markets include the availability of capacity, currency exchange rates (especially in low-cost countries), technological capability, flexibility, financial strength and timeliness in responding to design and schedule changes, and the price, quality and delivery requirements of our customers. Although we believe that we generally compete favorably with respect to many of these factors, some of our competitors, as compared to us, are larger and have greater financial and operating resources, greater geographic breadth and range of products, customer bases and brand recognition than we do. We also face competition from manufacturing operations of our current and potential customers that continually evaluate the relative benefits of internal manufacturing compared to outsourcing.

Suppliers

For portions of our business, we purchase raw materials and component parts from our customers or from suppliers chosen by our customers, at prices negotiated by our customers. When these suppliers increase their prices, cause delays in production schedules or fail to meet our customers’ quality standards, these customers have typically agreed to reimburse us for the costs associated with such price increases and not to charge us for costs caused by such delays or quality issues. Accordingly, our risks are largely limited to accurate inspections of such materials, timely communications and the collection of such reimbursements or charges, along with any additional costs incurred by us due to delays in, interruptions of, or non-optimal scheduling of production schedules. However, for a meaningful part of our business, we arrange our own suppliers and assume the additional risks of price increases, quality concerns and production delays.

Raw steel and fabricated steel parts are a major component of our cost of sales and net revenue for the industrial manufacturing business. We purchase a portion of our steel for use in this business at the direction of our customers, with periodic changes in the price of steel being reflected in the prices we are paid for our products. Increases in the costs of steel or other supplies can increase our working capital requirements, scrap expenses and borrowing costs.

The Company has encountered a greater number of electronic component shortages and extended lead time issues due to shortages of certain components in the marketplace for the Sypris Electronics business. These shortages and extended lead times are expected to continue for the foreseeable future. This may result in increased prices, extension of our product delivery dates, and increased inventory levels for these components as we secure the necessary components from our suppliers or alternative suppliers.

There can be no assurance that supply interruptions, tariffs or price increases will not slow production, delay shipments to our customers or increase costs in the future, any of which could adversely affect our financial results. Delays, interruptions or non-optimal scheduling of production related to disruptions in raw materials supplies can be expected to increase our costs.

Patents, Trademarks and Licenses

We own or license a number of patents and trademarks, but our business as a whole is not materially dependent upon any one patent, trademark, license or technologically related group of patents or licenses.

We regard our manufacturing processes and certain designs as proprietary trade secrets and confidential information. We rely largely upon a combination of trade secret laws, non-disclosure agreements with customers, suppliers and consultants, and our internal security systems, confidentiality procedures and employee confidentiality agreements to maintain the trade secrecy of our designs and manufacturing processes.

Government Regulation

Our operations are subject to compliance with regulatory requirements of federal, state and local authorities, in the U.S. and Mexico, including regulations concerning financial reporting and controls, labor relations, minimum pension funding levels, export and import matters, health and safety matters and protection of the environment. While compliance with applicable regulations has not adversely affected our operations in the past, there can be no assurance that we will continue to be in compliance in the future or that these regulations will not change or that the costs of compliance will not be material to us.

We must comply with detailed government procurement and contracting regulations and with U.S. Government security regulations, certain of which carry substantial penalty provisions for nonperformance or misrepresentation in the course of negotiations. Our failure to comply with our government procurement, contracting or security obligations could result in penalties or our suspension or debarment from government contracting, which would have a material adverse effect on our consolidated results of operations.

We are required to maintain U.S. Government security clearances in connection with certain activities of Sypris Electronics. These clearances could be suspended or revoked if we were found not to be in compliance with applicable security regulations. Any such revocation or suspension would delay our delivery of products to customers. Although we have adopted policies designed to ensure compliance with applicable regulations, there can be no assurance that the approved status of our facilities or personnel will continue without interruption.

We are also subject to comprehensive and changing federal, state and local environmental requirements, both in the U.S. and in Mexico, including those governing discharges to air and water, the handling and disposal of solid and hazardous wastes and the remediation of contamination associated with releases of hazardous substances. We use hazardous substances in our operations and, as is the case with manufacturers in general, if a release of hazardous substances occurs on or from any properties that we may own or operate, we may be held liable and may be required to pay the cost of remedying the condition. The amount of any resulting liability could be material.

Human Capital

As of December 31, 2025, we had a total of 548 employees, of which 406 were engaged in manufacturing, 14 were engaged in sales and marketing, 62 were engaged in engineering and 66 were engaged in administration. Approximately 224 of our employees were covered by collective bargaining agreements with various unions that expire on various dates through 2028. Our ability to maintain our workforce depends on our ability to attract and retain new and existing customers. Although we believe overall that relations with our labor unions are positive, there can be no assurance that present and future issues with our unions will be resolved favorably, that negotiations will be successful or that we will not experience a work stoppage, which could adversely affect our consolidated results of operations.

Throughout our Company’s history, we always recognized that people drive the strength of our business and our ability to effectively serve our customers and sustain our competitive position. We are focused on harmonizing our approach to talent to provide seamless opportunities and better experiences to our employees.

We have a Code of Conduct (“Code of Conduct”) applicable to all of our employees, our officers and directors and others (such as contractors) performing services for the Company. The Code of Conduct creates expectations and provides guidance on how to carry out our activities in accordance with our purpose, values and ethics, as well in compliance with applicable laws and Company policies. Our Code of Conduct includes topics such as anti-corruption, conflict of interest, discrimination, environmental responsibility, harassment, privacy, political activities, appropriate use of Company assets, protecting confidential information, and reporting Code of Conduct violations. It is used to reinforce our passion for operating in a fair, honest, responsible and ethical manner. The Code of Conduct also emphasizes the importance of having an open, welcoming environment in which all employees feel empowered to do what is right and are encouraged to voice concerns should violations of the Code of Conduct be observed. All employees are required to complete training on the Code of Conduct annually.

In an effort to ensure business continuity of our operations during events where senior leadership personnel is impacted, we endeavor each year to examine the top roles within our corporate and subsidiary organizations and identify individuals who could step into those positions if called upon to do so and to identify a set of individuals who could do so with additional time, experience and development. This succession planning exercise is conducted annually and reviewed with the Board of Directors.

Through our safety and health program we seek to optimize our operations with targeted safety, health and wellness opportunities designed to provide safe work conditions, and a healthy work environment. The health and wellness of our employees are critical to our success.

For information on the risks related to our human capital resources, see Item 1A – Risk Factors.

Internet Access

Copies of our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available free of charge through our website (www.sypris.com) as soon as reasonably practicable after we electronically file the material with, or furnish it to, the Securities and Exchange Commission (“SEC”). The SEC maintains an internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, including us, at www.sec.gov. The references to these website addresses do not constitute incorporation by reference of the information contained on the websites, which should not be considered part of this document.

Item 1A.Risk Factors

A number of significant risk factors could materially affect our business operations and cause our performance to differ materially from any future results projected or implied by our prior statements, including those described below. Many of these risk factors are also identified in connection with the more specific descriptions of our business and results of operations contained throughout this report.

Customers and Revenue Growth Risks

We seek to generate new business revenues to support our ongoing operations.

We had net losses of $6.3 million and $1.7 million in 2025 and 2024, respectively. We believe that we need to increase our revenues through new business generation in order to operate profitably. We are working to increase our revenues with new and existing customers. However, if we are not successful in maintaining or increasing our revenues, we may be unable to maintain the critical mass of capital investments or talented employees that are needed to succeed in our chosen markets or to maintain our existing facilities, which could result in restructuring or exit costs. As we work to expand our customers and our products, we must also effectively manage a more diverse production schedule to avoid slowing our production output. As we are awarded new products with new customers, we must onboard new operational processes in an effective and efficient manner. We cannot assure you that we will be successful in maintaining or increasing our revenues with new and existing customers to a level necessary to support our working capital requirements or to achieve profitability.

Even when we are chosen by a new or existing customer for new business, there can be no assurance that we will be able to successfully complete final contract negotiations on acceptable terms or at all. In many cases, we announce significant contract “orders”, “wins” or “awards” before final contract negotiations are complete, and there is a chance that these new announced contract orders, wins or awards may not result in a definitive agreement or the expected amount of revenues or profits. We cannot guarantee that any particular contract with a customer will result in the anticipated level of revenue or profitability.

We depend on a few key customers in challenging industries for most of our revenues.

Our five largest customers in 2025 were Northrop Grumman, Detroit Diesel, SubCom, ADI, and Sistemas, which in the aggregate accounted for 63% of net revenue. The loss of any of these customers or any other significant customer, or the renewal of business on less favorable terms, would have a material adverse impact on our business and results of operations. Due to our customer concentration, if one or more of our major customers were to experience difficulties in fulfilling their obligations to us, cease doing business with us, significantly reduce the amount of their purchases from us, favor competitors or new entrants or change their purchasing patterns, our business may be harmed.

The truck components and assemblies industry has experienced consolidation, credit risk, highly cyclical market demand, labor unrest, rising steel costs, extensive raw material lead-times, bankruptcies and other obstacles. The demand for our energy-related products lines, historically, has risen and fallen with the prices of oil and/or natural gas, as our customers’ capital expenditures budgets tend to be dependent upon energy prices. We depend on the continued growth and financial stability of customers in these industries and our core markets, as well as general economic conditions. Adverse changes affecting these customers, markets or economic conditions could harm our operating results.

The aerospace and defense electronics industry has experienced consolidation, increased competition, disruptive new technologies and uncertain funding levels. The aerospace and defense industry is also pressured by cyclicality, component obsolescence and shortages, rapid technological change, shortening product life cycles, decreasing margins, and government procurement and certification processes. Our aerospace and defense business must continue to replenish key legacy programs with new technologies if we are to successfully maintain or expand our market share. Our failure to address any of these factors could impair our ability to grow and diversify our base of customers in this segment.

There can be no assurance that any of our customers will not default on, delay or dispute payment of, or seek to reject our outstanding invoices in bankruptcy or otherwise. In addition, the existence of these factors may result in fewer customers in our target markets due to consolidation, bankruptcy, competitive or other market reasons, making it more difficult to obtain new clients and diversify our customer base in the near future.

The Company’s operating results can be adversely affected by inflation, changes in the cost or availability of labor, raw materials, energy, transportation and other necessary supplies and services, as well as the impact of proposed or imposed tariffs by the U.S. government on imports to the U.S. and/or the imposition of retaliatory tariffs by foreign countries.

We are currently experiencing inflationary pressures on our operating costs. Competition for labor is becoming more acute and we have experienced increased labor costs as a result. For significant portions of our business, we purchase raw materials and component parts which have been designated or specified by our customers, at prices negotiated by our customers. Raw material price fluctuations and volatility in the commodity markets, including tariffs and trade restriction could impact prices in the future. In any event, for a growing part of our business, we arrange our own suppliers and we could be impacted by the risks of any price increases, trade restrictions or production delays. Increases in the costs of steel or other supplies could also increase our working capital requirements and scrap expenses. In addition, we have experienced increased costs for the transportation of our products. We may not be able to fully offset any cost increases through cost reduction programs or price increases of our products, especially given the competitive environment. If we are not able to sufficiently increase our pricing to offset these increased costs or if increased costs and prolonged inflation continue, it could materially and adversely affect our business, operating results and profitability. Sustained price increases may lead to declines in volume. While we seek to project tradeoffs between price increases and volume, our projections may not accurately predict the volume impact of price increases. In addition, volatility in certain commodity markets could significantly affect our production cost.

Our business benefits from free trade agreements, such as the United States-Mexico-Canada Agreement and efforts to withdraw from, or substantially modify such agreement in addition to the implementation of more restrictive trade policies, such as more detailed inspections, higher tariffs, import or export licensing requirements and exchange controls or new barriers to entry, could limit our ability to capitalize on current and future growth opportunities in international markets, impair our ability to expand the business by offering new technologies, products and services, and could adversely impact our production costs, customer demand and our relationships with customers and suppliers. Any of these consequences could have a material adverse effect on our results of operations, financial condition and cash flows.

The executive branch of the U.S. government is granted broad authority under Section 232 of the Trade Expansion Act of 1962, as amended, to restrict imports in the interest of national security by imposing tariffs. Tariffs imposed on imported steel and other goods and raw materials could raise the costs associated with manufacturing our products. In general, there can be no assurance that any price fluctuations relating to tariffs or trade restrictions will not reduce demand, slow production, delay shipments to our customers or increase our costs in the future, any of which could adversely affect our financial results. If tariffs are imposed on the products we manufacture or on our customers’ goods containing components sourced from us, our sales could be negatively impacted. Although we strive to collaborate with our customers to recover part of any increased costs and with our suppliers to mitigate costs related to tariffs, there's no guarantee that our financial performance will not be impacted by proposed or imposed tariffs or changes in trade policies.

Customer contracts could be less profitable than expected.

We generally bear the risk that our contracts could be unprofitable or less profitable than planned, despite our estimates of revenues and future costs to complete such contracts.

A material portion of our business, historically, has been conducted under multi-year contracts, which generally include fixed prices or periodic price reductions without minimum purchase requirements. Over time, our revenues may not cover any increases in our operating costs which could adversely impact our results. Our financial results are at greater risk when we accept contractual responsibility for raw material or component prices, when we cannot offset price reductions, freight penalties, importation fees and cost increases with operating efficiencies or other savings, when we must submit contract bid prices before all key design elements are finalized or when we are subjected to other competitive pressures which erode our margins. The profitability of our contracts also can be adversely affected by unexpected start-up costs on new programs, inability to negotiate milestone billings, operating inefficiencies, scheduling constraints, ineffective capital investments, inflationary pressures or inaccurate forecasts of future unit costs.

Unexpected changes in our customers’ demand levels and our inability to execute our production efficiently have harmed our operating results in the past and could do so in the future. Many of our customers will not commit to firm production or delivery schedules. Inaccurate forecasting of our customers’ requirements can disrupt the efficient utilization of our manufacturing capacity, inventories or workforce and can cause increases in our inventory and working capital levels. If we receive unanticipated orders or rapid increases in demand, these incremental volumes could be unprofitable due to the higher costs of operating above our optimal capacity. Disagreements over pricing, quality, delivery, capacity, exclusivity or trade credit terms could disrupt order schedules. Orders may also fluctuate due to changing global capacity and demand, new products, changes in market share, reorganizations or bankruptcies, material shortages, labor disputes, freight costs, tariffs or other factors that discourage outsourcing. Unanticipated interruptions in our production schedule may limit our ability to satisfy customers’ contractual requirements and we could be responsible for lost profits or penalties for delays in delivery. These forces could increase, decrease, accelerate, delay or cancel our delivery schedules and could have a material adverse effect on our results of operations, financial condition and cash flows.

Congressional budgetary constraints or reallocations could reduce our government related sales.

Sypris Electronics serves as a contractor for large aerospace and defense companies such as Northrop Grumman, BAE Systems and Collins Aerospace, typically under federally funded programs, which represented approximately 45% and 36% of net revenue in 2025 and 2024, respectively.

Budget uncertainty, the potential for U.S. Government shutdowns, the use of continuing resolutions, and the federal debt ceiling can adversely affect our industry and the funding for our programs. If appropriations are delayed or a government shutdown were to occur and were to continue for an extended period of time, we could be at risk of program cancellations and other disruptions and nonpayment. When the U.S. Government operates under a continuing resolution, new contract and program starts are restricted and funding for our programs may be unavailable, reduced or delayed. Shifting funding priorities or federal budget compromises, also could result in reductions in overall defense spending on an absolute or inflation-adjusted basis, which could adversely impact our business.

Trends in oil and natural gas prices could adversely affect the level of exploration, development and production activity of certain of our customers and the demand for our services and products.

Demand for our services and products is sensitive to the level of exploration, development and production activity of, and the corresponding capital spending by, oil and natural gas companies, including national oil companies, regional exploration and production providers, and related service providers. The level of exploration, development and production activity is directly affected by trends in oil and natural gas prices, which historically have been volatile and are likely to continue to be volatile.

Prices for oil and natural gas are subject to large fluctuations in response to relatively minor changes in the supply of and demand for oil and natural gas, market uncertainty, and a variety of other economic factors that are beyond our control. Any prolonged reduction in oil and natural gas prices will depress the immediate levels of exploration, development and production activity, which could have an adverse effect on our business, results of operations and financial condition. Even the perception of longer-term lower oil and natural gas prices by oil and natural gas companies and related service providers can similarly reduce or defer major expenditures by these companies and service providers given the long-term nature of many large-scale development projects. Oil prices are particularly sensitive to actual and perceived threats to global political stability and to changes in production from OPEC member states. The outbreak or escalation of military hostilities, including between Russia and Ukraine, Israel and Hamas, the U.S., Israel and Iran, continued instability in the Middle East, and the potential destabilizing effect such conflicts may pose for the global oil and natural gas markets could impact demand for our products and adversely affect our profitability. Additionally, potential climate change regulation, including a potential carbon tax, could adversely affect the level of exploration, development and production activity of certain of our customers and the demand for our services and products.

Competition Risks

Increasing competition could limit or reduce our market share.

As an outsourced manufacturer, we operate in highly competitive environments that often include our customers’ internal capabilities. We believe that the principal competitive factors in our markets include the availability of manufacturing capacity, increasingly unfavorable currency exchange rates (especially in low-cost countries), technological strength, speed and flexibility in responding to design or schedule changes, price, quality, delivery, cost management and financial strength. Our earnings could decline if our competitors or customers can provide comparable speed and quality at a lower cost, or if we fail to adequately invest in the range and quality of products and manufacturing capabilities our customers require.

Most of our competitors are larger and have greater financial and organizational resources, geographic breadth and range of products, customer bases and brand recognition than we do. As a result, our competitors may respond more quickly to technological changes or customer needs, consume lower fixed and variable unit costs, negotiate reduced component prices, and obtain better terms for financing growth. If we fail to compete in any of these areas, we may lose market share and our business could be seriously harmed. There can be no assurance that we will not experience increased competition or that we will be able to achieve profitability as these new challenges arise.

Our technologies could become obsolete, reducing our revenues and profitability.

The markets for our products are characterized by changing technology and continuing process development. The future of our business will depend in large part upon the continuing relevance of our technological capabilities. We could fail to make required capital investments, develop or successfully market products that meet changing customer needs and anticipate or respond to technological changes in a cost-effective and timely manner. Our inability to successfully launch or sustain new or next generation programs or product features, especially in accordance with budgets or committed delivery schedules, could materially adversely affect our financial results. We could encounter competition from new or developing technologies that render our technologies and equipment less profitable or obsolete in our chosen markets and our operating results may suffer. In particular, the Company is currently ramping production on certain programs and also continuing to pursue new programs in an attempt to increase Sypris Electronics’ revenues. However, the initial production phase of new programs and substantial increases in production volumes may be costly and can be slower than anticipated. Increasing production volumes to meet customer demand within Sypris Electronics may not be successful.

Execution Risks

Contract terminations or delays could harm our business.

We often provide products under contracts that contain detailed specifications, quality standards and other terms. If we are unable to perform in accordance with such terms, our customers might seek to terminate such contracts, demand price concessions or other financial consideration or downgrade our performance ratings or eligibility for new business. Moreover, many of our contracts are subject to termination for convenience or upon default. These provisions could provide only limited recoveries of certain incurred costs or profits on completed work and could impose liabilities for our customers’ costs in procuring undelivered items from another source. If any of our significant contracts were to be repudiated, terminated or not renewed, we could lose substantial revenues, and our operating results as well as prospects for future business opportunities could be adversely affected.

We are subject to various audits, reviews and investigations, including private party “whistleblower” lawsuits, relating to our compliance with federal and state laws. Should our business be charged with wrongdoing, or determined not to be a “presently responsible contractor,” we could be temporarily suspended or debarred from receiving new government-approved subcontracts.

We must operate more efficiently.

If we are unable to improve the cost, efficiency and yield of our operations, and if we are not able to control costs, our financial results could suffer and we could be forced to sell assets, take on additional debt at higher costs or take other measures to restructure our operations or capital structure. A number of major obstacles could include:

● increased borrowing due to declines in sales;

● the need to identify and eliminate our root causes of scrap;

Our management or systems could be inadequate to support our existing or future operations. New customers or new contracts, particularly with new product offerings, could require us to invest in additional equipment or other capital expenditures which exceed our budgeted plans. We may have limited experience or expertise in installing or operating such equipment, which could negatively impact our ability to deliver products on time or with acceptable costs. In addition, a material portion of our manufacturing equipment requires significant ongoing maintenance to operate effectively, and we may experience maintenance and repair issues. Access to necessary supplies and component parts to support our equipment maintenance programs and repairs may not be available due to the age or complexity of the machinery and the timing or access to those supplies could impact our ability to meet production demands. The risk of technical failures, nonconformance with customer specifications, an inability to deliver next generation products or other quality concerns could materially impair our operating results. Similarly, expanding production for our energy-related products without effective process or quality controls could materially increase scrap rates and may impact the safety of our operating environment or expose our business to warranty risks and contractual violations.

Cybersecurity and artificial intelligence risks could negatively affect operations and result in increased costs.

Sypris Electronics, as a U.S. defense subcontractor, and our Company overall, face cybersecurity threats, threats to the physical security of our facilities and employees and terrorist or criminal acts, as well as the potential for business disruptions associated with information technology failures and natural disasters.

We routinely experience cybersecurity threats, threats to our information technology infrastructure and attempts to gain access to our sensitive information, as do our customers, vendors, suppliers and subcontractors, including the threat of ransomware attacks on our systems and the systems of third-party vendors and other parties with which we conduct business, all of which may become more pronounced in the event of geopolitical events and other uncertainties, such as the military hostilities between Russia and Ukraine, Israel and Hamas, and the U.S., Israel and Iran. Prior cyber attacks directed at us have resulted in security breaches, but to date have not had a material impact on our financial results. We have robust measures in place to address and mitigate cyber-related risks. However, we expect we will continue to experience additional attempted attacks in the future, including from nation states and criminal actors. We continue to invest in the cybersecurity and resiliency of our networks and products and to enhance our internal controls and processes, which are designed to help protect our systems and infrastructure, and the information they contain. The techniques used to obtain unauthorized access, disable or degrade service or sabotage systems are constantly evolving and often are not recognized until launched against a target, or even some time after. For example, the evolving use of artificial intelligence (“AI”) increases the risk of cyberattacks and data breaches, which themselves can evolve more rapidly when artificial intelligence is used to facilitate the attack. Despite our network and application security, threat intelligence services, internal control measures, and physical security procedures we employ to safeguard our systems, we may still be vulnerable to a security breach, intrusion, or loss or theft of confidential client data, transaction data, or proprietary company information, which may harm our business, reputation and future financial results. Use of artificial intelligence by our team members, whether authorized or unauthorized, could increase the risk that our intellectual property and other proprietary information may be unintentionally disclosed. We may be unable to anticipate these techniques, implement adequate preventative measures or remediate any intrusion on a timely or effective basis even if our security measures are appropriate, reasonable, and/or comply with applicable legal requirements. Certain efforts may be state-sponsored and supported by significant financial and technological resources, making them even more sophisticated and difficult to detect. Insider or employee cyber and security threats are also a significant concern for all companies, including ours. Use of artificial intelligence by team members, whether authorized or unauthorized, could increase the risk that intellectual property or other proprietary information is unintentionally disclosed. We depend on our customers, suppliers, and other business partners to implement adequate controls and safeguards to protect against and report cyber incidents. If they fail to deter, detect or report cyber incidents in a timely manner, we may suffer financial and other harm, including to our information, operations, performance, employees and reputation. Although we implement various measures and controls to monitor and mitigate risks associated with these threats and to increase the cyber resiliency of our infrastructure and products, there can be no assurance that these processes will be sufficient. Moreover, business policies and internal controls may not keep pace with rapidly evolving AI enabled threats. Successful attacks could lead to losses or misuse of sensitive information or capabilities; theft or corruption of data; harm to personnel, infrastructure or products; financial costs and liabilities and protracted disruptions in our operations and performance.

Although we work cooperatively with our customers and our suppliers, subcontractors, vendors and other partners to seek to minimize the impacts of cyber threats, other security threats or business disruptions, we must rely on the safeguards put in place by those entities, and those safeguards might not be effective.

The costs related to cybersecurity or other security threats or disruptions may not be fully insured or indemnified by other means. Additionally, obtaining external providers with expertise for assisting with the recovery from or defense against a cyber incident may not be obtainable on acceptable terms. Occurrence of any of these events could adversely affect our internal operations, the products we provide to customers, loss of competitive advantages derived from our research and development efforts, early obsolescence of our products, our future financial results, our reputation or our stock price.

Supplier Risks

Interruptions in the supply of key components and quality systems could disrupt production.

Some of our products require one or more components that are available from a limited number of providers or from sole-source providers. In the past, some of the materials we use, including steel, certain forgings or castings, capacitors and memory and logic devices, have been subject to industry-wide shortages or capacity allocations. As a result, suppliers have been forced to allocate available quantities among their customers, and we have not been able to obtain all of the materials desired. Some of our suppliers have struggled to implement reliable quality control systems which can negatively impact our operating efficiency and financial results. In downward business cycles, the tightening of credit markets has threatened the financial viability of an increasing number of suppliers of key components and raw materials and forced unanticipated shutdowns. Our inability to reliably obtain these or any other materials when and as needed has in the past and could in the future slow production or assembly, delay shipments to our customers, cause noncompliance with product certifications, impair the recovery of our fixed costs and increase the costs of recovering to customers’ schedules, including overtime, expedited freight, equipment maintenance, operating inefficiencies, higher working capital and the obsolescence risks associated with larger buffer inventories. Each of these factors could adversely affect operating results.

As discussed below, the Company experienced a liquidity shortfall beginning in the fourth quarter of 2023 and at various times during 2024, 2025 and into 2026. Suppliers may not sell to us given our liquidity position. If we are unable to purchase components from our suppliers, we may not be able to continue to service our customers which could adversely affect our financial position, results of operations and/or cash flows.

Shortages or increased costs of utilities could harm our business and our customers.

We and our customers depend on a constant supply of electricity and natural gas from utility providers for the operation of our respective businesses and facilities. In the past, we have experienced power outages which reduced our ability to deliver products and meet our customers’ demand for those products. If we or our customers experience future interruptions in service from these providers, our production and/or delivery of products could be negatively affected. We have experienced increased costs due to the heavy consumption of energy in our production process, which have been offset through revised production schedules. However, if the cost of energy continues to increase, our results of operations and those of certain customers could be negatively impacted.

Access to Capital and Liquidity Risks

We may require additional financing to conduct our operations and to repay our outstanding debt obligations. We cannot be certain that additional capital will be available on terms acceptable to us, or at all.

As reflected in the consolidated financial statements, the Company reported a net loss of $6.3 million and $1.7 million for the year ended December 31, 2025, and 2024, respectively, and cash used in operations of $5.7 million for the year ended December 31, 2025. The Company’s net inventory increased significantly in 2023 primarily related to contracts with Sypris Electronics’ aerospace and defense customers. Shipments to customers on certain of these contracts were delayed beyond the initial delivery dates, which negatively impacted the cycle time to convert inventory to cash. As a result, the Company experienced a liquidity shortfall beginning in the fourth quarter of 2023 and is continuing to aggressively manage working capital to improve liquidity. The shipment delays also contributed to an increase in trade payable balances with certain suppliers during 2023 and 2024. The Company successfully negotiated amended payment and other terms on the past due balances with certain suppliers and is continuing to work with suppliers to improve terms and maintain consistency in its supply chain relationships. The Company received the benefit of additional loans of $2.5 million during year ended December 31, 2024, and $3.0 million during the year ended December 31, 2025 from Gill Family Capital Management, Inc. (“GFCM”), an entity controlled by the Gill family that beneficially owns approximately 14.2% of our common stock, to help the Company manage its liquidity during those periods. Additionally, during the first quarter of 2026, the Company and GFCM amended the secured promissory note (the “Note”) to extend the maturity dates for $2.0 million of the obligation to April 1, 2027, $2.0 million to April 1, 2028, $5.0 million to April 1, 2029 and $3.0 million to April 1, 2030 (see Note 12 to the consolidated financial statements in this Annual Report on Form 10-K).

Our ability to service our current liabilities and satisfy our debt obligations will require a significant amount of cash. If we are unable to achieve our forecasted revenue, or if our costs are higher than expected, we may be required to revise our plans to provide for additional cost-cutting measures, seek additional financing or to consider other strategic alternatives. We may not be able to secure additional financing on favorable terms, if at all.

Until we have returned to sustained levels of consistent profitability, our access to capital may be limited.

Until the Company is able to achieve and maintain consistent profitability, we may not be able to obtain financing. If we are unable to achieve and maintain profitability, we will need to use existing cash resources or liquidate other assets to fund operating losses. While we have borrowed from GFCM on acceptable terms in the past, there can be no assurances that any additional debt financing from GFCM will be available in the future.

Potential inquiries into or audits of our Paycheck Protection Program loan, as well as the results of any such inquiries or audits, could have a significant adverse effect on us and our financial condition.

The Company entered into a promissory note with BMO Harris Bank National Association (“BMO”), effective May 1, 2020, that provided for a loan in the amount of $3.6 million (the “PPP Loan”) pursuant to expansion of the Small Business Administration (“SBA”) 7(a) loan program (the “Paycheck Protection Program” or “PPP”), established under the Coronavirus Aid, Relief, and Economic Security Act.

The U.S. Department of the Treasury and SBA have announced that SBA will conduct audits for PPP loans that exceed $2 million. Should we be audited or reviewed by the U.S. Department of the Treasury or the SBA as a result of the PPP Loan or filing an application for forgiveness or otherwise, such audit or review could result in the diversion of management’s time and attention, generate negative publicity and cause us to incur legal and reputational costs. If we were to be audited and receive an adverse outcome in such an audit, we could be required to return the full amount of the PPP Loan and may potentially be subject to civil and criminal fines and penalties. We may not have the resources to repay the PPP Loan if required to do so by the federal government.

On November 24, 2020, the Company submitted an application for forgiveness of the entire amount due on the PPP Loan. On June 28, 2021, the Company received notice from BMO that BMO had received confirmation from the SBA that the application for forgiveness of the PPP Loan had been approved. If it is subsequently determined that it must be repaid, we may be required to use a substantial portion of our cash flows from operations or proceeds from the sale of our assets to pay interest and principal on the PPP Loan. Any such repayment of the PPP Loan will reduce the funds available to us for working capital and other corporate purposes and may limit our ability to obtain additional financing for working capital or divert funds that are otherwise necessary to run our business. We cannot assure that our business will generate sufficient cash flow from operations or that future financing will be available to us in amounts sufficient to enable us to make required and timely repayments on our indebtedness, or to fund our operations. Additionally, though we believe we were eligible recipients of the PPP Loan under the PPP and our use of PPP Loan proceeds was in compliance with PPP rules and guidance, our receipt of the PPP Loan and the use of PPP Loan proceeds could result in negative publicity, or expose us to claims or potential liability under the federal False Claims Act, which prohibits the known filing of a false claim or the known use of false statements to obtain payment from the federal government, if it is determined that we were in fact not eligible to take the PPP Loan in the first instance.

Our ability to finance expansion or new business opportunities may be limited.

Our future liquidity and capital requirements depend on numerous factors other than bank borrowings or debt financing, including the pace at which we can effectively cut costs, increase revenues or successfully launch new products. We have pursued strategies that rely on research and development efforts to develop and commercialize our new products. We may not have the financial resources or be able to raise funds necessary to pursue these strategies under any future debt agreements which could further limit our ability to replace the loss of revenues. We may be unable fully to exploit or adequately to protect intellectual property rights resulting from our development efforts, which could materially affect our ability to compete, our reputation and our financial position, results of operations and/or cash flows.

Labor Relations Risks

We must attract and retain qualified employees while successfully managing related costs.

Our future success in a changing business environment, including during rapid changes in the size, complexity or skills required of our workforce, will depend to a large extent upon the efforts and abilities of our executive, managerial and technical employees. The loss of key employees could have a material adverse effect on our operations. Our future success will also require an ability to attract and retain qualified employees, especially those with engineering or production expertise in our core business lines.

Changes in our labor costs such as salaries, wages and benefits, or the cost of providing pension and other employee benefits, changes in health care costs, investment returns on plan assets and discount rates used to calculate pension and related liabilities or other requirements to accelerate the level of our pension fund contributions to reduce or eliminate underfunded liabilities, could lead to increased costs or disruptions of operations in any of our business units.

Disputes with labor unions could disrupt our business plans.

As of December 31, 2025, we had collective bargaining agreements covering approximately 224 employees (all of which were in Sypris Technologies), or 41% of our total employees. Excluding certain Mexico employees covered under an annually ratified agreement, there are no collective bargaining agreements expiring within the next twelve months. Certain Mexico employees are covered by an annually ratified collective bargaining agreement. These employees in Mexico represented approximately 36% of the Company’s workforce, or 200 employees as of December 31, 2025. Our ability to maintain our workforce depends on our ability to attract and retain new and existing customers as well as maintain good relations with our employees and labor unions. We could experience a work stoppage or other disputes which could disrupt our operations or the operations of our customers and could harm our operating results.

Regulatory Risks

Environmental, natural disasters, health and safety risks could expose us to potential liability.

We are subject to a variety of environmental regulations relating to the use, storage, discharge and disposal of hazardous chemicals and substances used in our operations. If we fail to comply with present or future regulations, we could be forced to alter, suspend or discontinue our manufacturing processes and pay substantial fines or penalties.

Groundwater and other contamination has occurred at certain of our current and former facilities during the operation of those facilities by their former owners, and this contamination may occur at future facilities we operate or acquire. There is no assurance that environmental indemnification agreements we have secured from the former owners of certain of these properties will be adequate to protect us from liability. Additionally, certain property we sold which was designated as Brownfields is under development by the current owners and could expose us to future costs.

Our business is also subject to potential liabilities with respect to health and safety matters. We are required to comply with federal, state, local and foreign laws and regulations governing the health and safety of our workforce, and we could be held liable for damages arising out of human exposure to hazardous substances or other dangerous working conditions. Health and safety laws and regulations are complex and change frequently. As a result, our future costs to comply with such laws or the liabilities incurred in the event of any violations may increase significantly.

A natural disaster could disrupt our operations, or our customers’ or suppliers’ operations and could adversely affect our results of operations and financial condition. Although we have plans designed to mitigate the impact of natural disasters on our operations, those plans may be insufficient, and any catastrophe may disrupt our ability to manufacture and deliver products to our customers, resulting in an adverse impact on our business and results of operations. In addition, our global operations expose us to risks associated with public health crises, such as pandemics, epidemics, and quarantines or shutdowns related to public health crisis and other catastrophic events, which could harm our business and cause our operating results to suffer.

Changes in interest rates and asset returns could increase our pension funding obligations and reduce our profitability.

We have unfunded obligations under certain of our defined benefit pension plans. The valuation of our future payment obligations under the plans and the related plan assets are subject to significant adverse changes if the credit and capital markets cause interest rates and projected rates of return to decline. Such declines could also require us to make significant additional contributions to our pension plans in the future. A material increase in the unfunded obligations of these plans could also result in a significant increase in our pension expense in the future.

We may incur additional tax expense or become subject to additional tax exposure.

Our provision for income taxes and the cash outlays required to satisfy our income tax obligations in the future could be adversely affected by numerous factors. These factors include changes in the level of earnings in the tax jurisdictions in which we operate, changes in the valuation of deferred tax assets and liabilities, changes in our plans to repatriate the earnings of our non-U.S. operations to the U.S. and changes in tax laws and regulations.

Our income tax returns are subject to examination by federal, state and local tax authorities in the U.S. and tax authorities outside the U.S. The results of these examinations and the ongoing assessments of our tax exposures could also have an adverse effect on our provision for income taxes and the cash outlays required to satisfy our income tax obligations.

Adverse regulatory developments or litigation could harm our business.

Our businesses operate in heavily regulated environments. We must successfully manage the risk of changes in or adverse actions under applicable law or in our regulatory authorizations, licenses and permits, governmental security clearances or other legal rights to operate our businesses, to manage our work force or to import and export goods and services as needed. Our business activities expose us to the risks of litigation with respect to our customers, suppliers, creditors, stockholders or from warranty claims or product liability, environmental or asbestos-related matters. We also face the risk of other adverse regulatory actions, compliance costs or governmental sanctions, as well as the costs and risks related to our ongoing efforts to design and implement effective internal controls. While we maintain insurance coverage with respect to certain product liability claims or other legal claims, we may not be able to obtain such insurance on acceptable terms in the future, if at all, and any such insurance may not provide adequate coverage against product liability claims. In addition, product liability claims can be expensive to defend and can divert the attention of management and other personnel for significant periods of time, regardless of the ultimate outcome. Furthermore, even if we are successful in defending against a claim relating to our products, claims of this nature could cause our customers to lose confidence in our products and us.

General Risks

Fluctuations in foreign currency exchange rates have increased, and could continue to increase, our operating costs.

We have manufacturing operations located in Mexico. Excluding the cost of steel used in production, a significant portion of our operating expenses are denominated in the Mexican Peso. Currency exchange rates fluctuate daily as a result of a number of factors, including changes in a country's political and economic policies. Volatility in the currencies of our entities and the United States dollar, as well as inflationary costs, could seriously harm our business, operating results and financial condition. The primary impact of currency exchange fluctuations is on the cash, payables and expenses of our Mexican operating entities. Additionally, unexpected losses have occurred from increases in the value of the Mexican Peso relative to the United States dollar and further unexpected losses could occur, which could be material to our business, financial results, or operations.

Risks associated with climate change and other environmental impacts, and increased focus and evolving views of our customers, shareholders and other stakeholders on climate change issues, could negatively affect our business and operations.

The effects of climate change create short and long-term financial risks to our business, both in the U.S. and Mexico. We have significant operations located in regions that have been, and may in the future be, exposed to significant weather events and other natural disasters. Climate related changes can increase variability in or otherwise impact natural disasters, including weather patterns, with the potential for increased frequency and severity of significant weather events (e.g., flooding, hurricanes and tropical storms), natural hazards (e.g., increased wildfire risk), rising mean temperature and sea levels, and long-term changes in precipitation patterns (e.g., drought, desertification, and/or poor water quality). We expect climate change will continue to affect our facilities, operations, employees and communities in the future, particularly our Sypris Electronics facility. Our suppliers are also subject to natural disasters that could affect their ability to deliver or perform under our contracts, including as a result of disruptions to their workforce and critical infrastructure. Disruptions also impact the availability and cost of materials needed for manufacturing and could increase insurance and other operating costs.

Increased worldwide focus on climate change has led to legislative and regulatory efforts to combat both potential causes and adverse impacts of climate change, including regulation of greenhouse gas emissions. New or more stringent laws and regulations related to greenhouse gas emissions and other climate change related concerns may adversely affect us, our suppliers and our customers. Some of our facilities are, for example, engaged in manufacturing processes that produce greenhouse gas emissions, including carbon dioxide, or rely on products from others that do so. New and evolving laws and regulations could mandate different or more restrictive standards, could require capital investments to transition to low carbon technologies, could adversely impact our ongoing operations, and could require changes on a more accelerated time frame. Our suppliers may face similar challenges and incur additional compliance costs that are passed on to us. These direct and indirect costs may adversely impact our results.

The market price for our common stock has been volatile.

The market price of our common stock has been subject to wide price fluctuations in the past and could be subject to fluctuations in the future, in response to various factors, many of which are beyond our control and may be unrelated to our financial condition, operating performance, prospects or other indicators of value. These factors may include technical factors in the public trading market for our stock that may produce price movements that may or may not comport with macro, industry or company-specific fundamentals, including, without limitation, the sentiment of retail investors (including as it may be expressed on financial trading and other social media sites), the amount and status of short interest in our securities, access to margin debt, trading in options and other derivatives on our common stock, fractional share trading and other technical trading factors or strategies.

Our insurance coverage may be inadequate to cover all significant risk exposures.

We carry a range of insurance policies intended to protect our assets and operations, including general liability insurance and property damage insurance. While we endeavor to purchase insurance coverage appropriate to our risk assessment, we are unable to predict with certainty the frequency, nature or magnitude of claims for direct or consequential damages, and as a result our insurance program may not fully cover us for losses we may incur. In addition, as a result of a number of catastrophic weather and other events in the United States, insurance companies have incurred substantial losses and accordingly in many cases they have substantially reduced the nature and amount of insurance coverage available to the market, have broadened exclusions, and/or have substantially increased the cost of such coverage. It is likely that the tight insurance market will continue into the foreseeable future. Our business requires that we maintain various types of insurance. If such insurance is not available or not available on economically acceptable terms, our business could be materially and adversely affected.

Our insurance coverage, customer indemnifications or other liability protections may be unavailable or inadequate to cover all of our significant risks, which could adversely affect our profitability and overall financial position. We endeavor to obtain insurance from financially solid, responsible, highly rated counterparties in established markets to cover significant risks and liabilities (including, for example, natural disasters, space launches and on-orbit operations, cybersecurity, hazardous operations, energetics and products liability). Not every risk or liability can be insured, and insurance coverage is not always reasonably available. The policy limits and terms of coverage reasonably obtainable may not be sufficient to cover actual losses or liabilities. Even if insurance coverage is available, we are not always able to obtain it at a price or on terms acceptable to us or without increasing exclusions. Disputes with insurance carriers over the availability of coverage, and the insolvency of one or more of our insurers has affected and may continue to affect the availability or timing of recovery, as well as our ability to obtain insurance coverage at reasonable rates in the future. In some circumstances we may be entitled to certain legal protections or indemnifications from our customers through contractual provisions, laws or otherwise. However, these protections are not always available, are difficult to negotiate and obtain, are typically subject to certain terms or limitations, including the availability of funds, and may not be sufficient to cover our losses or liabilities. If insurance coverage, customer indemnifications and/or other legal protections are not available or are not sufficient to cover risks or losses, it could have a material adverse effect on our financial position, results of operations and/or cash flows.

We face other factors which could seriously disrupt our operations.

Many other risk factors beyond our control could seriously disrupt our operations, including: risks relating to war, future terrorist activities, or political uncertainties; risks relating to another pandemic, natural disasters or other casualties which could shut down our domestic or foreign facilities, disrupt transportation of products or supplies, increase the costs under our self-insurance program or change the timing and availability of funding in our aerospace and defense electronics markets; risks inherent in operating abroad, including foreign currency exchange rates, adverse regulatory developments, and miscommunications or errors due to inaccurate foreign language translations or currency exchange rates; or our failure to anticipate or to adequately insure against other risks and uncertainties present in our businesses including unknown or unidentified risks.

Item 1B.Unresolved Staff Comments

None.

Item 1C. Cybersecurity

Risk Management and Strategy

We maintain a cybersecurity and information security program, which leverages the National Institute of Standards and Technology (“NIST”) 800-171. Risks from cybersecurity threats are regularly evaluated as part of our broader risk management activities and as a fundamental component of our internal control system. The scope of our evaluation encompasses risks that may be associated with both our internally managed IT systems and key business functions and sensitive data operated or managed by third-party service providers.

Key personnel receive cybersecurity training regularly. Our IT team engages third-party vendors to assist with providing timely cybersecurity threat alerts in addition to monitoring cybersecurity threats and our defenses against cyberattacks. This monitoring includes the proactive identification of vulnerabilities in our systems with threat intelligence. The employees within our IT team who specialize in cybersecurity operations are responsible for coordinating and overseeing the activities of these third-party vendors.

Sypris has a managed service provider (MSP) for incident response of cybersecurity threats and cybersecurity incidents and is managed by the Chief Information Security Officer (“CISO”), who coordinates activities and monitors response performance. The CISO reports to the VP of Administration who prepares briefings to the Board of Directors, and other relevant committees. Our IT team evaluates security alerts received from our MSP, and any alert or threat that the MSP or the IT team identifies as a cybersecurity incident (such as a data security breach) is promptly escalated for further assessment and immediate remediation. Upon confirmation that a cybersecurity incident has occurred, our IT team will coordinate with our MSP and representatives from other internal departments, the VP of Administration, legal counsel and other service providers as needed. The VP of Administration directs the development of a coordinated response strategy, entailing risk containment, notification processes, system restoration, incident documentation and assessment.

The VP of Administration will notify the other members of our senior management team and the Chairman of the Finance and Audit Committee and the Independent Directors of our Board of Directors as needed.

Cybersecurity threats, including as a result of any previous cybersecurity incidents, have not materially affected and we believe are not reasonably likely to affect us, including our business strategy, results of operations or financial condition. We and our third-party service providers have frequently been the target of cybersecurity threats and expect them to continue, and for an additional description of these cybersecurity risks and potential related impacts on us, see “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K.

Governance

Board of Directors and Board Committees.In accordance with our Guidelines on Corporate Governance, the Board of Directors, both directly and through its committees, oversees the proper functioning of our risk management process. In particular, the Audit and Finance Committee assists the Board in its oversight of management’s responsibility to assess, manage and mitigate risks associated with the Company’s business and operational activities, including data privacy and cybersecurity concerns. The Board and Committee each meet at regularly scheduled and special meetings throughout the year at which meetings management reports to the Board concerning the results of its risk management activities, as well as external factors that may change the levels of business risk to which we are exposed. Specifically, the Audit and Finance Committee receives regular updates from the VP of Administration, as often as necessary but at least once per year, with respect to our cybersecurity threats and responses to any cybersecurity incidents.

Management’s Responsibilities.Management has implemented risk management structures, policies and procedures, and manages our risk exposure on a day-to-day basis. Accordingly, management assesses and responds to cybersecurity threats as part of our ongoing risk assessment and as an internal control over financial reporting. The VP of Administration directs our cybersecurity operations and risk responses. The CISO, who has 30 years of IT architecture, infrastructure and operations experience working directly with the MSP. The CISO reports to the VP of Administration who has 30 years of experience in all facets of IT, business process and controls. The VP of Administration reports to the President, CEO and Chairman of the Board of the Company and reports regularly to the Audit Committee and to the full Board of Directors, providing insights into our cybersecurity posture, incidents, and remediation efforts. VP of Administration meets with the MSP at least once every quarter to review and assess cybersecurity incidents and non-incident threats (and response measures undertaken) to determine if any adjustment to our cybersecurity managed services is required.

Item 2. Properties

Our principal manufacturing operations are engaged in electronics manufacturing for our aerospace and defense customers and industrial manufacturing for our truck components and assemblies and oil and gas pipeline component customers. The following chart indicates the significant facilities that we own or lease, the location and size of each such facility and the manufacturing certifications that each facility possesses. The facilities listed below (other than the corporate office) are used principally as manufacturing facilities.

Corporate Office:

Manufacturing Facilities:

Below is a listing and description of the various manufacturing certifications or specifications that we utilize at various of our facilities.

Certification/Specification Description

Item 3. Legal Proceedings

Groundwater and other contamination has occurred at certain of our current and former facilities during the operation of those facilities by their former owners, and this contamination may occur at future facilities we operate or acquire. There is no assurance that environmental indemnification agreements we have secured from the former owners of certain of these properties will be adequate to protect us from liability. No administrative or judicial proceedings with respect to these or any other environmental regulations or conditions are pending against the Company or known by the Company to be contemplated by Government authorities.

The Company is subject to other legal proceedings and claims that have not been fully resolved and that have arisen in the ordinary course of business. In the opinion of management, the final disposition of such matters will not have a material adverse effect on our consolidated financial position, cash flows or results of operations.

The information set forth in Note 15 to the consolidated financial statements in this Annual Report on Form 10-K is incorporated by reference into this Item 3.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

We are a smaller reporting company as defined in Item 10(f)(1) of Regulation S-K and thus are not required to provide the performance graph required in paragraph (e) of Item 201 of Regulation S-K.

Our common stock is traded on the Nasdaq Global Market under the symbol “SYPR.”

As of March 20, 2026, there were 434 holders of record of our common stock. No cash dividends were declared during 2025 or 2024.

Dividends may be paid on common stock only when, as and if declared by our Board of Directors in its sole discretion. We do not anticipate paying dividends in 2026.

There were no shares of common stock repurchased during the three months ended December 31, 2025.

Item 6. [Reserved]

The following discussion of our consolidated results of operations and financial condition should be read together with the other financial information and consolidated financial statements included in this Annual Report on Form 10-K. This discussion contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from the results anticipated in the forward-looking statements as a result of a variety of factors, including those discussed in “Item 1A. Risk Factors” and elsewhere in this Annual Report on Form 10-K.

Overview

We provide products and engineering, design, and manufacturing services for a variety of critical infrastructure sectors, including energy, space, communications, defense, transport, chemical, and water. Sypris serves its customers globally through its operations located in North America. We produce a wide range of manufactured products, often under multi-year, sole-source contracts.

Economic Conditions

Our operations are impacted by global economic conditions, including inflationary increases of certain raw materials, as well as logistics, tariffs, transportation, utilities and labor costs, supply chain constraints and increased interest rates. While we have taken pricing actions and implemented transformation initiatives that we expect to improve productivity and offset these cost increases, we expect supply chain pressures and inflationary cost increases to continue throughout 2026, which may continue thereafter and could negatively impact our results of operations.

Sypris Technologies Outlook

The North American Class 8 commercial vehicle market experienced a downturn in 2025, in addition to the automotive and sport utility vehicle markets also served by Sypris Technologies. New heavy-duty truck demand has historically been cyclical and is particularly sensitive to the industrial sector of the economy, which generates a significant portion of the freight tonnage hauled by commercial vehicles. During 2025, production of Class 8 trucks in North America decreased 24% from 2024. According to industry publications, the outlook for 2026 and 2027 is forecasting a slight increase in production over 2025, before increasing 27% in 2028. We believe that the market diversification Sypris Technologies has accomplished over recent years by adding new programs in the automotive, sport-utility and off-highway markets has benefited and will continue to benefit the Company as the demand cycles for our products in these markets differs from the Class 8 commercial vehicle market, thereby reducing volatility in our revenue profile.

The oil and gas markets served by our Tube Turns® brand of engineered products continues to be shaped largely by geopolitical factors, macroeconomic variables such as high interest rates and rising material costs, evolving policies and regulations and the emergence of new technologies. Sales in this market are dependent on, among other things, the level of worldwide oil and natural gas demand, the price of crude oil and natural gas and capital spending by exploration and production companies and drilling contractors. The conflicts in the Middle East, including military hostilities between Israel and Hamas and the U.S., Israel and Iran, the war between Russia and Ukraine and inflationary pressures have also led to disruption, instability and volatility in global markets and industries that could negatively impact our operations.

We will continue to pursue new business in a wide variety of markets from light automotive to new pressure vessel and pipeline applications to achieve a more balanced portfolio across our customers, markets and products.

Sypris Electronics Outlook

Ongoing demand in the electronic circuit card assembly industry across multiple manufacturing sectors continues to create shortages and extended lead times. In some instances, waiting times for certain components approach a year or more. We factor supplier-provided lead times into internal planning schedules and new customer quotations. From time to time, we encounter part obsolescence which requires us to identify an alternate part suitable for use. We continue to work with our customers on strategies to mitigate any adverse impact upon our ability to service their requirements. Factors which arise after the placement of the customer’s order may cause us to miss projected delivery dates. Inflationary costs are expected to continue through 2026.

The electronic circuit card assembly industry is highly competitive, and demand can be volatile from period to period. Increasing demand for advanced technologies, supply chain diversification, and continued strong government defense spending along with geopolitical factors, including ongoing U.S.-China trade tensions and regulatory shifts, are prompting companies to adopt supply chain resilience strategies, such as "friendshoring", nearshoring and onshoring that benefit domestic suppliers. Additionally, OEMs are expected to continue the trend of outsourcing lower-level electronic assemblies, while focusing on their core competencies of design and system integration. However, challenges such as labor cost fluctuations, raw material constraints, and evolving trade policies may impact operational efficiency and cost structures. Overall, the sector is positioned for growth, with companies focusing on technological innovation, strategic partnerships, and supply chain optimization to maintain competitiveness in a rapidly evolving defense and aerospace market. During 2024 and 2025, we announced new program awards and releases for Sypris Electronics, with certain programs continuing into 2026. In addition to contract awards from DoW prime contractors related to weapons systems, electronic warfare and infrared countermeasures in our traditional aerospace and defense markets, we have also been awarded subcontracts for manufacturing services to the communication and navigation markets, which require our advanced capabilities for delivering products for complex, high cost of failure platforms.

While we do not serve as a prime contractor to the U.S. government, we serve as a subcontractor on various U.S. government programs. Funding for U.S. Government programs is subject to a variety of factors that can affect our business, including the U.S. presidential administration’s budget requests and procurement priorities and policies, annual congressional budget authorization and appropriation processes, and other U.S. government domestic and international priorities. U.S. government spending levels, particularly defense spending, and timely funding thereof can affect our financial performance over the short and long term.

The U.S. presidential administration published its FY 2026 budget request in June 2025. The budget request includes $848.3 billion in the base budget (discretionary) funding, and $113.3 billion in reconciliation (mandatory) funding for the DoW. The One Big Beautiful Bill Act passed the Senate and House and was signed by the President on July 4, 2025. The bill provides more than $150 billion in mandatory funding (inclusive of the $113.3 billion) for DoW available until September 30, 2029.

While the U.S. presidential administration has announced their proposal for a significant increase in defense spending in FY 2027, we anticipate the federal budget, debt ceiling and regulatory environment will continue to be subject to debate and compromise shaped by, among other things, the U.S. presidential administration and Congress, heightened political tensions, the global security environment, inflationary pressures, and macroeconomic conditions. The result may be shifting funding priorities, which could have material impacts on defense spending broadly, and the effect on individual programs or our results cannot be predicted at this time. Additionally, the U.S. presidential administration continues to take steps to evaluate government-wide and defense-specific staffing and procurement, which includes assessing mission priorities, procurement methods, program performance, and other factors and then potentially taking action based on those assessments. The impact on demand for our products and services and our business are difficult to predict.

Critical Accounting Policies and Estimates

The preparation of the consolidated financial statements and accompanying notes in conformity with U.S. generally accepted accounting principles requires that we make estimates and assumptions that affect the amounts reported. Changes in facts and circumstances could have a significant impact on the resulting estimated amounts included in our consolidated financial statements. We believe the following critical accounting estimates are those estimates made in accordance with generally accepted accounting principles that involve a significant level of estimation uncertainty and have had or are reasonably likely to have a material impact on our financial condition or results of operations. We also have other policies that we consider to be key accounting policies, such as our policies for revenue recognition for Sypris Technologies, including cost of sales; however, these policies do not meet the definition of critical accounting estimates because they do not generally require us to make estimates or judgments that involve a significant level of estimation uncertainty. The following discussion of accounting estimates is intended to supplement the Summary of Significant Accounting Policies presented as Note 1 to our consolidated financial statements in Item 8.

Net Revenue and Cost of Sales. The Company recognizes revenue when it satisfies a performance obligation by transferring control of a promised product or rendering a service to a customer. The amount of revenue recognized reflects the consideration the Company expects to be entitled to in exchange for the product or service (the “transaction price”). The Company’s transaction price in its contracts with customers is generally fixed; no payment discounts, rebates or refunds are included within its contracts. The Company does not provide service-type warranties, nor does it allow customer returns. In connection with the sale of various parts to customers, the Company is subject to typical assurance warranty obligations covering the compliance of the electronics parts produced to agreed-upon specifications (See Note 1 to the consolidated financial statements in this Annual Report on Form 10-K). Customer returns, when they occur, relate to quality rework issues and are not connected to any repurchase obligation of the Company.

A performance obligation is a promise in a contract to transfer a distinct product or render a service to a customer and is the unit of account to which the transaction price is allocated under ASC 606, Revenue from Contracts with Customers. When a contract contains multiple performance obligations, we allocate the transaction price to the individual performance obligations using the price at which the promised goods or services would be sold to customers on a standalone basis. For most sales within our Sypris Technologies segment and a portion of sales within Sypris Electronics, control transfers to the customer at a point in time. Indicators that control has transferred to the customer include the Company having a present right to payment, the customer obtaining legal title and the customer having the significant risks and rewards of ownership. The Company’s principal terms of sale are FOB Shipping Point, or equivalent, and, as such, the Company primarily transfers control and records revenue for product sales upon shipment.

For contracts where Sypris Electronics serves as a subcontractor for aerospace and defense companies under federally funded programs, we generally recognize revenue over time as we perform due to the continuous transfer of control to the customer. This continuous transfer of control to the customer is supported by clauses in the contracts that allow the customer to unilaterally terminate the contract for convenience, pay us for costs incurred plus a reasonable profit and take control of any work in process. Because control is transferred over time, revenue and gross profit is recognized based on the extent of progress towards completion of the performance obligation. We use labor hours incurred as a measure of progress for these contracts because it best depicts the Company’s performance of the obligation to the customer, which occurs as we incur labor on our contracts. Under this measure of progress, the extent of progress towards completion is measured based on the ratio of labor hours incurred to date to the total estimated labor hours at completion of the performance obligation.

Long-lived asset impairment. We perform periodic impairment analysis on our long-lived amortizable assets whenever events or circumstances indicate that the carrying amount of such assets may not be recoverable. When indicators are present, we compare the estimated future undiscounted net cash flows of the operations to which the assets relate to their carrying amount. If the operations are unable to recover the carrying amount of their assets, the long-lived assets are written down to their estimated fair value. Fair value is determined based on discounted cash flows, third party appraisals or other methods that provide appropriate estimates of value. A considerable amount of management judgment and assumptions are required in performing the impairment test, principally in determining whether an adverse event or circumstance has triggered the need for an impairment review. The Company did not have any long-lived assets measured at fair value on a nonrecurring basis as of December 31, 2025 or 2024.

Pension Plan Funded Status. Our U.S. defined benefit pension plans are closed to new entrants and there were no participants still accruing benefits under any of the plans in 2025. Changes in our net obligations are principally attributable to changing discount rates and the performance of plan assets. Pension obligations are valued using discount rates established annually in consultation with our outside actuarial advisers using a theoretical bond portfolio, adjusted according to the timing of expected cash flows for our future obligations. Plan liabilities at December 31, 2025 are based upon a discount rate of 5.20% which reflects the Above Mean Mercer Yield Curve rate as of December 31, 2025 rounded to the nearest 5th basis point. Declining discount rates increase the present value of future pension obligations; a 25 basis point decrease in the discount rate would increase our U.S. pension liability by about $0.4 million. As indicated above, when establishing the expected long-term rate of return on our U.S. pension plan assets, we consider historical performance and forward-looking return estimates reflective of our portfolio mix and investment strategy. Based on the most recent analysis of projected portfolio returns, we concluded that the use of 3.95% for the Louisville Hourly Plan, 4.65% for the Marion Plan and 4.45% for the Louisville Salaried Plan as the expected return on our U.S. pension plan assets for 2025 was appropriate. A change in the assumed rate of return on plan assets of 100 basis points would result in a $0.2 million change in the estimated 2026 pension expense.

At December 31, 2025, we have $6.2 million of unrecognized losses relating to our U.S. pension plans. Actuarial gains and losses, which are primarily the result of changes in the discount rate and other assumptions and differences between actual and expected asset returns, are deferred in Accumulated Other Comprehensive Loss and amortized to expense following the corridor approach. We use the average remaining service period of active participants unless almost all of the plan’s participants are inactive, in which case we use the average remaining life expectancy for all active and inactive participants.

Based on the current funded status of our U.S. plans, we expect to contribute $0.3 million during 2026, which represents the minimum funding amounts required by federal law.

Reserve for Excess, Obsolete and Scrap Inventory. We record inventory at the lower of cost, determined under the first-in, first-out method, or net realizable value, and we reserve for excess, obsolete or scrap inventory. These reserves are primarily based upon management’s assessment of the salability of the inventory, historical usage of raw materials, historical demand for finished goods and estimated future usage and demand. An improper assessment of salability or improper estimate of future usage or demand, or significant changes in usage or demand could result in significant changes in the reserves and a positive or a negative impact on our consolidated results of operations in the period the change occurs.

Stock-based Compensation. We account for stock option based compensation in accordance with the fair value recognition provisions using the Black-Scholes option-pricing method, which requires the input of several subjective assumptions. The Company uses historical Company and industry data to estimate the expected price volatility. Due to the lack of sufficient historical exercise data to provide a reasonable basis upon which to otherwise estimate the expected term of the stock options, the Company uses the simplified method to estimate the expected term. Under the simplified method, the expected term of an option is presumed to be the mid-point between the vesting date and the end of the contractual term. The dividend yield is assumed to be zero as we have not paid dividends nor do we anticipate paying any dividends in the foreseeable future. The risk-free rate is based on the U.S. Treasury yield curve in effect at the time of grant for the estimated life of the option. Forfeitures are recorded as they occur. Changes in the subjective assumptions can materially affect the fair value estimate of stock-based compensation and consequently, the related expense recognized in the consolidated statements of operations.

Income Taxes. We account for income taxes as required by the provisions of ASC 740, Income Taxes, under which deferred tax assets and liabilities are recognized for the tax effects of temporary differences between the financial reporting and tax bases of assets and liabilities measured using enacted tax rates.

Management judgment is required in determining income tax expense and the related balance sheet amounts. In addition, under ASC 740-10, Accounting for Uncertainty in Income Taxes, judgments are required concerning the ultimate outcome of uncertain income tax positions. Actual income taxes paid may vary from estimates, depending upon changes in income tax laws, actual results of operations and the final audit of tax returns by taxing authorities. Tax assessments may arise several years after tax returns have been filed. We believe that our recorded income tax liabilities adequately provide for the probable outcome of these assessments.

Deferred tax assets are also recorded for operating losses and tax credit carryforwards. However, ASC 740 requires that a valuation allowance be recorded when it is more likely than not that some portion or all of the deferred tax assets will not be realized. This assessment is largely dependent upon projected near-term profitability including the effects of tax planning. Deferred tax assets and liabilities are determined separately for each tax jurisdiction in which we conduct our operations or otherwise incur taxable income or losses. The Company evaluates its deferred tax position on a quarterly basis and valuation allowances are provided as necessary. During this evaluation, the Company reviews its forecast of income in conjunction with other positive and negative evidence surrounding the realizability of its deferred tax assets to determine if a valuation allowance is needed. Based on its current forecast, the Company believes it will have sufficient future taxable income to realize the deferred tax assets recorded by its Mexican subsidiary.

Based on its current forecast, the Company has established a valuation allowance against all U.S. deferred tax assets. Until an appropriate level and characterization of profitability is attained, the Company expects to continue to maintain a valuation allowance on its net deferred tax assets related to future U.S. tax benefits. If we determine that we would be able to realize our deferred tax assets in the future in excess of the net recorded amount, an adjustment to reduce the valuation allowance would increase net income in the period that such determination is made.

Results of Operations

We operate in two segments, Sypris Technologies and Sypris Electronics. The table presented below compares our segment and consolidated results of operations from 2025 to 2024. The table presents the results for each year, the change in those results from one year to another in both dollars and percentage change and the results for each year as a percentage of net revenue.

In addition, as used in the table, “NM” means “not meaningful.”

Year Ended December 31, 2025 Compared to Year Ended December 31, 2024

Year Over Results as Percentage of

Year Over Year Net Revenue for the

Year Ended Year Percentage Year Ended

December 31, Change Change December 31,

Favorable Favorable

(in thousands, except percentage data)

Net revenue:

Cost of sales:

Gross profit:

Net Revenue. Sypris Technologies derives its revenue from the sale of forged and finished steel components and subassemblies and high-pressure closures and other fabricated products. Net revenue for Sypris Technologies decreased $23.5 million from the prior year to $51.7 million in 2025. The net revenue decrease was primarily attributable to the cyclical decline in the commercial vehicle market. During 2025, production of Class 8 trucks in North America decreased 24% from 2024. Additionally, during the first quarter of 2025, Sypris Technologies began operating under a sub-maquiladora services agreement with one of its customers in Mexico. As a result, the customer retains ownership of the inventory, and revenue is recognized on the value-add portion only, resulting in a decrease of $4.8 million for the year ended December 31, 2025 as compared to the prior year. Energy product sales decreased $1.9 million as compared to the prior year due to the impact of tariffs on sales volumes. Revenue for Sypris Technologies is expected to decrease slightly in 2026, due to the anticipated decline in the commercial vehicle market during the first half of 2026, partially offset by higher energy component sales and new program expansion with existing customers in the commercial vehicle market.

Sypris Electronics derives its revenue primarily from circuit card and full “box build” manufacturing, high reliability manufacturing and systems assembly and integration. Net revenue for Sypris Electronics increased $3.2 million to $68.1 million in 2025. The increase in revenue for the year ended December 31, 2025 was primarily related to the ramping of production during the year on several new programs. This was partially offset by the completion of shipments under one of its long-term contracts. The order backlog for Sypris Electronics is expected to support an increase in revenue during 2026.

Gross Profit. Sypris Technologies’ gross profit decreased $6.4 million to $6.4 million in 2025 as compared to $12.8 million in the prior year due to the significant decrease in volumes and lower absorption of fixed overhead costs as a result of lower production.

Sypris Electronics’ gross profit decreased $4.1 million to $3.0 million as compared to $7.1 million in the prior year. The decrease in gross profit for the year ended December 31, 2025 was primarily a result of an unfavorable mix of programs and delays of certain customer deliveries, which has limited our ability to ramp up production to the levels anticipated and resulted in increased costs and decreased operational efficiency. Additionally, Sypris Electronics incurred additional engineering costs for scope modifications on new contracts during 2025. Furthermore, Sypris Electronics recorded charges of $1.2 million related to excess and obsolete inventory during the year as a result of changes in estimated future demand on various programs. The expected increase in revenue during 2026 attributable to order backlog is expected to favorably impact overhead absorption, and the contribution margin from higher volumes is further expected to generate gross profit expansion.

Selling, General and Administrative. Selling, general and administrative expense decreased $1.0 million to $16.0 million in 2025 as compared to $17.0 million in 2024. The decrease in selling, general and administrative expense for the year ended December 31, 2025 was primarily as a result of lower consulting costs, reduced headcount and favorable medical claims. Selling, general and administrative expense increased as a percentage of revenue to 13.3% for the year ended December 31, 2025 from 12.1% for the year ended December 31, 2024.

Interest Expense, Net. Interest expense for the year ended December 31, 2025 decreased $0.1 million due to the reduction in interest incurred on extended terms on certain accounts payable for Sypris Electronics, partially offset by an increase in the weighted average debt outstanding. The weighted average debt outstanding under the Note increased to $11.4 million during 2025 from $8.7 million in 2024.

Other (Income) Expense, Net. Other (income) expense, net, was income of $2.0 million in 2025 as compared to expense of $1.2 million for 2024. During the year ended December 31, 2025, the Company closed on a sale leaseback transaction with an unrelated third party. Under this transaction, the Company sold its facility located in Louisville, Kentucky, with a net book value of $0.4 million for net cash proceeds of approximately $2.9 million. The Company recognized a gain of $2.5 million on this transaction, which is included in other income (expense), net in the consolidated statements of operations. This gain was partially offset by pension expense of $0.6 million. Foreign currency related expenses were not material for the year ended December 31, 2025.

During the year ended December 31, 2024, the Company recognized pension related expense of $0.8 million. Foreign currency related expenses were not material for the year ended December 31, 2024.

Income Taxes. The 2025 income tax provision consists of a current tax benefit of $0.1 million and deferred tax expense of $0.1 million. The 2024 income tax provision consists of current tax expense of $1.5 million and deferred tax expense of $0.2 million. The current tax expense in 2025 and 2024 includes taxes accrued by our Mexican subsidiary and domestic state income taxes and adjustments. The 2025 and 2024 deferred tax expense includes net changes in the foreign deferred tax assets during the year.

Deferred tax assets and liabilities are determined separately for each tax jurisdiction in which we conduct our operations or otherwise incur taxable income or losses. The Company evaluates its deferred tax position on a quarterly basis and valuation allowances are provided as necessary. During this evaluation, the Company reviews its forecast of income in conjunction with other positive and negative evidence surrounding the realizability of its deferred tax assets to determine if a valuation allowance is needed. Based on its current forecast, the Company believes it will have sufficient future taxable income to realize the deferred tax assets recorded by its Mexican subsidiary.

Liquidity and Capital Resources

As reflected in the consolidated financial statements, the Company reported a net loss of $6.3 million and $1.7 million for the year ended December 31, 2025 and 2024, respectively, and cash used in operating activities of $5.7 million for the year ended December 31, 2025. The Company’s net inventory increased significantly in 2023, primarily related to contracts with Sypris Electronics’ aerospace and defense customers. Shipments to customers on certain of these contracts were delayed beyond the initial delivery dates, which negatively impacted the cycle time to convert inventory to cash. Additionally, the Company experienced a significant drop in volumes within the Sypris Technologies business attributable to the cyclical decline in the commercial vehicle market in 2025, which led to a corresponding decrease in gross profit. As a result, the Company experienced a liquidity shortfall beginning in the fourth quarter of 2023 and at various times during 2024, 2025 and into 2026. The shipment delays also contributed to an increase in trade payable balances with certain suppliers during 2023 and 2024, The Company successfully negotiated amended payment and other terms on the past due balances with certain suppliers and is continuing to work with suppliers to improve terms and maintain consistency in its supply chain relationships.

The Company received the benefit of additional loans of $3.0 million and $2.5 million during the years ended December 31, 2025 and 2024, respectively from Gill Family Capital Management, Inc. (“GFCM”) to help the Company manage its liquidity during those periods. This additional $5.5 million loaned to the Company by GFCM in 2024 and 2025 was approved by the Audit Committee and provided the Company with necessary liquidity. Additionally, during the first quarter of 2026, the Company and GFCM amended the Note to extend the maturity dates for $2.0 million of the obligation to April 1, 2027, $2.0 million to April 1, 2028, $5.0 million to April 1, 2029 and $3.0 million to April 1, 2030 (see Note 12 to the consolidated financial statements in this Annual Report on Form 10-K).

Our ability to service our current liabilities will require a significant amount of cash. Management has evaluated our ability to generate this cash to meet our obligations for the next twelve months. Our primary sources of funds to meet our liquidity and capital requirements include cash on hand, funds generated through revenue growth from the Company’s consolidated operations and reductions in the Company’s investment in working capital. Based upon our current forecast, we believe that we will have sufficient liquidity to finance our operations for the next twelve months.

Although we believe the assumptions underlying our current forecast are reasonable, management is also prepared to implement contingency plans that include other cost reduction initiatives to improve profitability and cash flow, or management can take additional steps such as adjusting the timing and amount of certain operating expenses as well as capital expenditures or the issuance of new debt. If we are unable to achieve our forecasted revenue, or if our costs are higher than expected, we may be required to revise our plans to provide for additional cost-cutting measures, seek additional financing or to consider other strategic alternatives. We may not be able to secure additional financing on favorable terms, if at all.

Cash Balance. At December 31, 2025, we had approximately $6.8 million of cash and cash equivalents, of which $1.8 million was held in jurisdictions outside of the U.S. that, if repatriated, could result in withholding taxes. We expect existing cash and cash flows from operations to continue to be sufficient to fund our operating activities and cash commitments for investing and financing activities, such as capital expenditures, for at least the next twelve months. Significant changes from our current forecasts, including, but not limited to: (i) meaningful shortfalls in our projected revenues, (ii) unexpected costs or expenses, and/or (iii) operating difficulties which cause unexpected delays in scheduled shipments, could require us to seek additional financing or force us to make further reductions in spending, extend payment terms with suppliers, liquidate assets where possible and/or suspend or curtail planned programs. Any of these actions could materially harm our business, results of operations and future prospects. And as noted above, additional financing may not be available to us.

Material Cash Requirements

Gill Family Capital Management Note. The Company has received the benefit of loans from GFCM in the form of secured promissory note obligations totaling $12.0 million in principal as of December 31, 2025 and $9.0 million as of December 31, 2024. GFCM is an entity controlled by the Company’s Chairman, President and Chief Executive Officer, Jeffrey T. Gill and one of our directors, R. Scott Gill. GFCM, Jeffrey T. Gill and R. Scott Gill are significant beneficial stockholders of the Company.

During the year ended December 31, 2025, the Company and GFCM amended the Note to, among other things: (i) increase the principal amount by $3.0 million to $12.0 million, (ii) extend the maturity dates for $2.0 million of the obligation to April 1, 2026, $2.0 million to April 1, 2027, $5.0 million on April 1, 2028 and the balance of $3.0 million on April 1, 2029, and (iii) allow for the deferral of payment for up to 100% of the interest due on the Note to April 1, 2026. During the first quarter of 2026, the Company further amended the Note to extend the maturity dates on all tranches by one year and allow for the continued deferral of payment for up to 100% of the interest due on the Note to April 1, 2027. Interest on the Note is payable quarterly, unless the deferral option is elected, and the rate is reset on April 1 of each year at the greater of 8% or 500 basis points above the five-year Treasury note average during the previous 90-day period. The additional amounts loaned to the Company in 2024 and 2025 and the Note modification in 2026, were approved by the Audit Committee and provided the Company with necessary liquidity.

The Note provides for a first security interest in substantially all of the Company’s assets, including those in Mexico (see Note 12 to the consolidated financial statements in this Annual Report on Form 10-K).

Finance Lease Obligations. As of December 31, 2025, the Company had $4.6 million outstanding under finance lease obligations for both property and machinery and equipment with maturities through 2031 and a weighted average interest rate of 13.1%.

Equipment Financing Obligations. As of December 31, 2025, the Company had $1.4 million outstanding under equipment financing facilities, with payments due through 2030, and a weighted average interest rate of 6.9%.

Purchase Commitments. We had purchase commitments totaling approximately $25.2 million at December 31, 2025, primarily for inventory.

Cash Flows from Operating, Investing and Financing Activities

Operating Activities. Net cash used in operating activities was $5.7 million in 2025, as compared to cash provided of $2.0 million in 2024. The aggregate decrease in accounts receivable in 2025 resulted in a source of cash of cash of $0.7 million as a result of the timing of shipments during the period. The decrease in inventory in 2025 resulted in a source of cash of $13.3 million. The decrease in inventory was primarily as a result of a ramp up of shipments within Sypris Electronics and the reflection of our strategic inventory management efforts. A significant portion of the inventory had been purchased in previous periods and was funded through prepayments from customers, which was recorded as contract liabilities. As shipments have increased with Sypris Electronics during the year, these contract liabilities have also decreased, which is the primary component of the $10.0 million change in accrued and other liabilities during 2025. Accounts payable decreased during 2025, resulting in a use of cash of $8.2 million. This change in accounts payable was driven by an effort within Sypris Electronics to pay down past due payables and reduce inventory purchases during the period. Prepaid expenses and other assets decreased during 2025 resulting in cash provided of $0.6 million primarily as a result of decreased contract assets and capitalized costs associated with programs in the startup phase of production at Sypris Electronics.

Investing Activities. Net cash provided by investing activities was $2.2 million during the year ended December 31, 2025. During 2025, the Company closed on a sale leaseback transaction with an unrelated third party. Under this transaction, the Company sold its facility located in Louisville, Kentucky, with a net book value of $0.4 million for net cash proceeds of approximately $2.9 million. Partially offsetting this was capital expenditures during the same period of $0.8 million.

Net cash used in investing activities for the year ended December 31, 2024 was comprised of capital expenditures of $1.1 million.

Financing Activities. Net cash provided by financing activities was $0.8 million in 2025 and was comprised of proceeds from the Note of $3.0 million, partially offset by payments on finance leases and equipment financing obligation of $2.1 million and $0.1 million for minimum statutory tax withholdings on stock-based compensation. Net cash used in financing activities in 2024 was comprised of proceeds from the Note of $2.5 million and proceeds from equipment financing obligations of $0.4 million, partially offset by payments on finance leases and equipment financing obligations of $2.0 million and payments of $0.1 million for minimum statutory tax withholdings on stock-based compensation.

Recent Accounting Pronouncements

See Note 1 to our consolidated financial statements for a full description of recent accounting pronouncements, including the respective dates of adoption and effects on our results of operations and financial condition.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

We are a smaller reporting company as defined in Item 10(f)(1) of Regulation S-K and thus are not required to provide the quantitative and qualitative disclosures about market risk specified in Item 305 of Regulation S-K.

Item 8. Financial Statements and Supplementary Data

SYPRIS SOLUTIONS, INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Report of Independent Registered Public Accounting Firm (PCAOB ID 173) 33

Consolidated Statements of Operations 35

Consolidated Statements of Comprehensive Loss 36

Consolidated Balance Sheets 37

Consolidated Statements of Cash Flows 38

Consolidated Statements of Stockholders’ Equity 39

Notes to Consolidated Financial Statements 40

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Stockholders and the Board of Directors of Sypris Solutions, Inc.

Louisville, Kentucky

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Sypris Solutions, Inc. (the "Company") as of December 31, 2025 and 2024, the related consolidated statements of operations, comprehensive loss, stockholders’ equity, and cash flows for the years then ended, and the related notes (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2025 and 2024, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Net revenue and gross profit recognized over time

As more fully described in Notes 1 and 3 to the financial statements, for contracts where the Company serves as a contractor for aerospace and defense companies under federally funded programs, revenue and gross profit is recognized over time due to the continuous transfer of control to the customer based upon the extent of progress towards completion of the performance obligation. The Company uses labor hours incurred as the measure of progress as it best depicts the Company’s performance of the obligation to the customer. Under this measure of progress, the extent of progress towards completion is measured based on the ratio of labor hours incurred to date to the total estimated labor hours to complete the performance obligation. Revenue and gross profit are recognized based on the extent of progress towards completion of the performance obligation.

Sypris Solutions Inc SYPR US Equity

SYPR · 10-K · period ended 2025-12-31

Item 1. Business

Item 1A.Risk Factors

Item 1B.Unresolved Staff Comments

Item 1C. Cybersecurity

Item 2. Properties

Item 3. Legal Proceedings

Item 4. Mine Safety Disclosures

Item 6. [Reserved]

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Item 8. Financial Statements and Supplementary Data

Sypris Solutions Inc SYPR US Equity☆

SYPR · 10-K · period ended 2025-12-31

Item 1. Business

Item 1A.Risk Factors

Item 1B.Unresolved Staff Comments

Item 1C. Cybersecurity

Item 2. Properties

Item 3. Legal Proceedings

Item 4. Mine Safety Disclosures

Item 6. [Reserved]

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Item 8. Financial Statements and Supplementary Data

Sypris Solutions Inc SYPR US Equity