STRT US Equity☆

10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the fiscal year ended June 29, 2025.

☐ Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

Commission File Number 0-25150

STRATTEC SECURITY CORPORATION

(Exact name of registrant as specified in its charter)

(State of Incorporation) (I.R.S. Employer Identification No.)

3333 West Good Hope Road, Milwaukee, WI53209

(Address of principal executive offices)

Registrant’s telephone number, including area code:(414) 247-3333

Securities registered pursuant to Section 12(b) of the Act:

Title of each class Trading Symbol Name of exchange on which registered

Common Stock, $.01 par value STRT The NASDAQ Stock Market

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐Yes ☒No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐Yes ☒No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☒Yes ☐No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ☒Yes ☐No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

Large accelerated filer ☐ Accelerated filer ☒

Non-accelerated filer ☐ Smaller Reporting Company ☒

Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management's assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the Registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the Registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). ☐Yes ☒No

The aggregate market value of the voting Common Stock held by non-affiliates of the registrant as of December 27, 2024 (the last business day of the Registrant’s most recently completed second quarter), was approximately $135,807,533(based upon the last reported sale price of the Common Stock at December 27, 2024 on the NASDAQ Global Market).

On August 1, 2025, there were outstanding 4,161,334 shares of the Registrant’s $.01 par value Common Stock (which includes any unvested restricted shares previously awarded).

Documents Incorporated by Reference

Part III of this report incorporates information by reference from Registrant's Proxy Statement for the annual meeting of its shareholders to be held on October 15, 2025.

STRATTEC SECURITY CORPORATION

TABLE OF CONTENTS

June 29, 2025

Page

PART I

Item 1. Business 2

Item 1A. Risk Factors 8

Item 1B. Unresolved Staff Comments 14

ITEM 1C. Cybersecurity 14

Item 2. Properties 14

Item 3. Legal Proceedings 14

Item 4. Mine Safety Disclosures 15

PART II

Item 6. [Reserved] 16

Item 7A. Quantitative and Qualitative Disclosures about Market Risk 21

Item 8. Financial Statements and Supplementary Data 22

Item 9A. Controls and Procedures 45

Item 9B. Other Information 47

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 47

PART III

Item 10. Directors, Executive Officers, and Corporate Governance 48

Item 11. Executive Compensation 48

Item 14. Principal Accounting Fees and Services 48

PART IV

Item 15. Exhibits and Financial Statement Schedules 49

Signatures 53

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

In this Annual Report on Form 10-K for Strattec Security Corporation ("Strattec," "the Company," "we," "us," or "our"), statements that are not reported financial results or other historic information are "forward-looking statements." These forward-looking statements relate to, among other things, the Company's future financial position, business strategy, targets, projected sales, costs, income, capital expenditures, debt levels and cash flows, and plans and objectives of management for future operations. The use of words such as "may," "will," "expect," "intend," "estimate," "anticipate," "believe," "should," "project" or "plan" or similar terminology are generally intended to identify forward-looking statements. These forward-looking statements by their nature address matters that are, to different degrees, uncertain and are subject to risks, assumptions, and other factors, some of which are beyond the Company's control, that could cause actual results to differ materially from those expressed or implied by such forward-looking statements.

The Company’s operations and financial performance are subject to certain risks and uncertainties, including:

•

an uncertain economic environment and inflationary conditions coupled with the cyclical nature of the automotive industry may adversely affect global vehicle production and demand for our products;

•

we operate in a highly competitive market and technological developments within our sphere of offerings are rapidly evolving;

•

changes in customer purchasing actions, warranty provisions and product recall policies could adversely affect our business, results of operations and financial condition;

•

work stoppages within our operations or at the location of our key customers as a result of labor disputes could adversely impact our business, results of operations and financial condition;

•

labor cost inflation or unionization efforts in Mexico, coupled with a shortage of skilled laborers in the United States, could increase our manufacturing expenses and impact production efficiency;

•

changes in tariffs or international trade policies could adversely affect our results, particularly with respect to goods imported into the United States or produced under U.S. trade agreements such as the USMCA;

•

delays and restrictions impacting the import of goods and components stemming from heightened security procedures or changes in policies implemented by the U.S. Government related to U.S.-Mexico border crossings could have a negative effect on our business;

•

an increase in the volume and scope of product returns or customer cost reimbursement actions could adversely impact our business, results of operations and financial condition;

•

our ability to manage changes in the costs of operations, warranty claims, adverse business and operational issues could be affected by a material global supply chain and logistics disruption;

•

future shortages in the supply of semiconductor chips and other matters adversely impacting the timing, availability and costs of material component parts and raw materials for the production of our products could adversely affect our business, results of operations and financial condition;

•

macroeconomic and geopolitical conditions, including regional conflicts, could adversely affect our business, results of operations and financial condition;

•

interruptions to our information security management systems and cybersecurity incidents could adversely affect our business, results of operations and financial condition; and

•

other matters including, but not limited to, the factors listed in the “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K.

Shareholders, potential investors and other readers are urged to consider these factors carefully in evaluating the forward-looking statements and are cautioned not to place undue reliance on such forward-looking statements. The forward-looking statements made herein are only made as of the date of this Form 10-K and the Company undertakes no obligation to update such forward-looking statements.

1

PART I

ITEM 1. BUSINESS

Overview

Strattec, which has a history serving the automotive industry for over 100 years, was incorporated as a stand-alone company in 1995. Our Milwaukee, Wisconsin headquarters oversees operations in the United States and Mexico for a global customer base. Since the Company’s inception, we have partnered with our customers to design and manufacture highly engineered products and solutions creating a broad range of innovative automotive access products. While primarily focused on key North American automotive original equipment manufacturers (“OEM”), we also provide our products globally to customers in both OEM and aftermarket channels. We believe that our engineering expertise, ability to deliver customized solutions and our quality and delivery performance are key advantages that differentiate the Company from its competitors and allow us to be a premier partner to our customers.

Products

As automotive vehicle security and safety demands continue to strengthen, our product portfolio is well positioned to meet our customers’ evolving needs. Our product offerings primarily relate to security and authorization solutions, as well as vehicle access systems.

Security and authorization products include mechanical and electronically enhanced locks and keys, fobs, passive entry passive start systems, digital key, steering column and instrument panel ignition lock housings and related solutions. We established our leading market position with North American automotive customers initially with our legacy mechanical locks and keys. Our flexible and responsive service and our deep relationships with our customers have allowed us to deliver these products both directly to our OEM customers and through our differentiated service in the aftermarket channel.

Our vehicle access product portfolio was derived from an acquisition in fiscal 2009 and includes power sliding doors, power tailgates and lift gate systems, as well as power deck lid systems. The products included in these highly-engineered systems include drivetrain mechanisms, complex latching mechanisms and electronic control units. These system offerings work together to provide our customers optimal performance through a deep understanding of mechanical, electrical and software architectures.

We have leveraged our know-how between our lock and key products and our vehicle access solutions to also develop user-interface control products, which include steering wheel switches, controllers, e-shifters and paddle switches.

We also provide door handles through our joint venture. These products leverage our deep manufacturing knowledge and understanding of automotive requirements to deliver high quality components, bringing together world-class injection mold and assembly capability with high quality paint processes.

All of our products are safety critical, powertrain agnostic and are applicable for internal combustion, plug-in/hybrid or electric vehicles. Applications we serve require robust engineering partnership during the vehicle design cycle, which is typically three to five years ahead of start of production. Our engineering team works closely with our customers during the design phase to ensure our products meet specific vehicle platform requirements. Once our products are designed into an application, we are well positioned as the incumbent supplier for the life of the vehicle due to the high degree of customization and vehicle platform certification. We believe this is one of the reasons our products are rarely changed during a platform lifecycle which, in the case of the North American automotive industry, typically lasts five to seven years.

Across our product lines, we have built strong platform and system competencies, including software development. This approach enables us to leverage our software and component technical capabilities to move with speed and agility and provide better package flexibility for easier integration into a variety of platforms for our customers. For example, we have elevated our key fob business with our digital key product which leverages our system and software capability to meet increasing security, software and packaging architecture needs. Our power access solutions products are designed from a core platform approach that allows us to leverage carry-over components within a system to move faster through the design phase and provide optimal package flexibility while meeting increasing vehicle safety and security needs.

We believe we are at the forefront of emerging technology, collaborating with OEM product development and purchasing groups to provide cost-effective innovative solutions to the challenges facing our customers.

2

Customers

We are a direct supplier to automotive and light truck OEMs, as well as other transportation industry OEMs. Our product mix varies by customer, with most customers sourcing multiple product categories from us.

Direct sales to various OEMs (including Tier 1 suppliers) represented approximately 90% of our total sales for both fiscal 2025 and 2024. The remainder of our sales are to the OEM service channels, the aftermarket and sales of certain products to non-automotive customers.

A significant portion of our annual sales are to General Motors Company, Ford Motor Company, and Stellantis. The products sold to these customers are model specific, fitting only certain defined applications. As such, we are highly dependent on these customers' ability to produce and sell vehicles which utilize our products.

Sales to our customers are coordinated through direct sales personnel and supported by our program managers, application engineers and other product engineering personnel. In addition, we distribute our components and security products to the automotive aftermarket through authorized wholesale distributors, as well as other marketers and users of component parts. Our sales are generally based upon purchase orders issued by the OEMs and updated for volume adjustments through production releases. As such, we do not have a firm and definitive backlog of orders. Once awarded to supply products for a particular platform, we typically support those products for the life of the vehicle, which is normally five to seven years, though this term is not guaranteed. When we are the incumbent supplier for a given platform, we believe we have a competitive advantage in winning the replacement platform, although, future awards are not guaranteed.

Product Engineering Focus

Our product engineering activities, including research and development, are an essential part of our efforts to develop new or improved innovative products. Our product engineering, including the development of customized customer solutions, is accomplished in both the United States and Mexico. The development of new products, or enhancements to existing products, are the result of collaboration with customers. Our engineers and program managers follow a formalized product development process to streamline development and identify market requirements. Our advanced design and engineering capabilities contribute to the development of innovative and highly engineered products, maintain our technological leadership and enhance our ability to provide customers with unique customized solutions and products. We specialize in system, mechanical, electrical and software engineering and have advanced modeling and testing capabilities that allow us to meet the design and timing requirements from our customers.

Patents, Tradename and Other Intellectual Property

The development of new or improved technologies is critical to the execution of our business strategy. Currently-owned patents and patents obtained for new or improved technologies form an important basis for the Company's success and underpin the success of our research and development efforts. We have a policy of seeking patents on new products and improvements when appropriate.

We also rely upon trade secret protection for our confidential and proprietary information. We maintain confidentiality agreements with our customers and key executives. In addition, we enter into confidentiality agreements with select suppliers, consultants and employees as appropriate to evaluate new products or business relationships relevant to our success.

Intellectual property is of considerable importance to the manufacturing, marketing and sale of our products. However, we do not consider any single patent, trademark or other intellectual property to be material to our business as a whole, except for the Strattec tradename.

Operations

Substantially all of our products are manufactured at the facilities we own in the United States and Mexico. Many of the components used in our products are manufactured in our facility in Milwaukee, Wisconsin, which specializes in die casting, stamping and plating operations. We also operate in three production facilities in Juarez, Mexico. These facilities assemble finished products and have plastic injection molding capabilities, as well as printed circuit board manufacturing capability. Finally, our operations in our Leon, Mexico facility include plastic injection molding operations, a custom paint system and assembly operations.

3

Seasonal Nature of the Business

Our principal operations are directly related to the automotive industry. Consequently, we have historically experienced seasonal fluctuations to the extent that automotive vehicle production slows, such as in the summer months when many customer plants close for model year changeovers and in December when many customer plants close for the holidays. Fluctuation has also occurred, in recent years when global light vehicle production, inventory and consumer demand all experienced extreme dislocations from historic norms due to the global COVID-19 pandemic. Post-pandemic, global light vehicle production has continued to be negatively impacted by widespread supply chain disruptions, limiting new vehicle manufacturing. Seasonality of production has normalized since 2023, however total production volume has remained below pre-pandemic levels.

4

Served Customer Vehicles

Our product solutions can be found on over 90 different customer vehicles, including electric (EV), plug-in/hybrid, and internal combustion engine platforms. Key vehicle platforms include, but are not limited to, the following:

Acura MDX Chevrolet Express Van Hyundai Staria

Acura RDX Chevrolet S-10 Jeep Commander

Acura ZDX Chevrolet Silverado & Silverado HD Jeep Compass

Aston Martin AMR24 Chevrolet Spin Jeep Gladiator

Aston Martin DB 12 Chevrolet Suburban Jeep Grand Cherokee

Aston Martin DBS Chevrolet Tahoe Jeep Meridian

Aston Martin DBX Chevrolet Trail Blazer Jeep Recon

Aston Martin Valhalla Chevrolet Traverse Jeep Wagoneer

Aston Martin Valkyrie Chevrolet Trax Jeep Wrangler/Wrangler Unlimited

Aston Martin Valour Chrysler Pacifica Kia Carnival

Aston Martin Vantage Dodge Charger Lincoln Aviator

Audi Q5 Dodge Durango Lincoln Corsair

BMW X7 Dodge Hornet Lincoln Navigator

Brightdrop EV400 Ford Bronco Sport Ram 1500 Classic Pickup

Brightdrop EV600 Ford Escape Ram 1500 Pickup

Buick Enclave Ford Expedition Ram HD Pickup

Buick Envista Ford Explorer Ram REV Pickup

Cadillac ATS Ford F-150 Lightning Volkswagen Jetta

Cadillac Celestiq Ford Focus Volkswagen Tiguan

Cadillac CT4 Ford F-Series Pickup Volvo EX90

Cadillac CT5 Ford F-Series Super Duty Pickup Volvo Heavy Truck

Cadillac Escalade Ford Maverick Pickup Volvo Polestar 3

Cadillac Escalade IQ Ford Mustang

Cadillac Lyriq Ford Mustang Mach-E

Cadillac Optiq Ford Ranger Pickup

Cadillac Vistiq GMC Acadia

Cadillac XT4 GMC Canyon

Cadillac XT5 GMC Hummer

Cadillac XT6 GMC Savana

Chevrolet Blazer GMC Sierra & Sierra HD

Chevrolet Bolt GMC Sierra Pickup

Chevrolet Cobalt GMC Terrain

Chevrolet Colorado GMC Yukon and Yukon XL

Chevrolet Corvette Honda Odyssey

Chevrolet Corvette E-Ray Honda Passport

Chevrolet Equinox Honda Prologue

5

Raw Material Costs and Availability

We source materials and components from a network of global suppliers. Our primary raw materials are high-grade zinc, brass, nickel silver, steel, aluminum, plastic resins, semiconductor chips and other electronics. These materials are generally available from a number of suppliers and are subject to price fluctuations. We believe our sources for raw materials are reliable and adequate for our needs. In the normal course of business, we do not carry substantial inventories of these raw materials in excess of levels reasonably required to meet our near-term production requirements.

Competition

We compete with domestic and foreign competitors based on product design, engineering support, quality, delivery and price. While the number of direct competitors in our product markets is currently relatively small, automotive OEMs actively encourage competition between potential suppliers. We compete for business principally based on of quality, technical support, program management, innovation and aftermarket support.

Our competitors include Aisin, Alpha-Tech, Brose, Continental, Edscha, Gecom, Honda Lock, Huf North America, Inteva, JNS Auto Parts, Kiekert, Magna, Marquardt, MinbeaMitsumi, Mitsuba, Novares, Ohi, PHA Automotive, Shin Chang, Stabilus, Tokai-Rika, Ushin, and Valeo.

Human CapitalManagement

Our employees, coupled with our ability to attract, retain and develop talent, are critical to our business strategy and success. Our human capital strategy is focused on developing a creative and open working environment and developing the right skill sets to advance our culture and unlock innovation and growth. We also strive to develop talent for critical roles and leadership positions, reward and support associates through competitive compensation and benefits, and promote the health and safety of our employees. At June 29, 2025, we had 2,848 associates including 417 in the United States, 2,425 in Mexico and 6 in other countries. We have two facilities with union representation, which covers 9.4% of our employees, including our Milwaukee, Wisconsin location (contract expires November 1, 2025) and Leon, Mexico location (contract expires April 8, 2026). In recent years, we have not experienced any significant work slowdowns, stoppages or other labor disruptions.

Executive Officers of Registrant

Our executive officers as of June 29, 2025, together with their ages, positions, and business experience are below:

Name Age Current Position

Jennifer Slater 51 President and Chief Executive Officer

Matthew Pauli 47 Senior Vice President, Chief Financial Officer

Rolando Guillot 57 Senior Vice President, Chief Operating Officer

Richard Messina 58 Senior Vice President, Chief Technology Officer

Chey Varto 55 Senior Vice President, Chief Commercial Officer

Jennifer Slater has served as our President and Chief Executive Officer, and as a Director, since July 2024. Prior to joining Strattec, Ms. Slater was Executive Vice President and General Manager, Performance Sensing, of Sensata Technologies, Inc. (NYSE: ST), a global industrial technology company, from April 2024 through June 2024. She also held the position of Senior Vice President, Automotive & Aftermarket, at Sensata from April 2023 to April 2024; and Vice President and General Manager of Sensata's Heavy Duty and Off-Road business from September 2022 through March 2023. Prior to her time with Sensata, Ms Slater held the position of Group Vice President and General Manager, Global OE and Products, at Clarios, LLC from 2019 to September 2022. Ms. Slater serves as a director of Valvoline Inc. (NYSE: VVV), a retail automotive services company; she was first elected in July 2022.

Matthew Pauli has served as our Senior Vice President, Chief Financial Officer since November 2024. With over 25 years of financial expertise, he previously served as Chief Financial Officer of CentroMotion, a global manufacturer of highly engineered products serving

6

the transportation and other industrial markets. Earlier in his career, Mr. Pauli held senior finance roles at Enerpac (NYSE: EPAC), including Corporate Controller/Chief Accounting Officer, and VP of Finance after starting his career at Ernst & Young.

Rolando Guillot has served as our Chief Operating Officer since March 2023. Prior to that he was Senior Vice President - Operations since 2016. Mr. Guillot joined Strattec in September 1996 and will be retiring in September 2025.

Richard Messina has served as our Senior Vice President - Global Engineering since January 2020 and Chief Technology Officer since May 2023. Prior to that, Mr. Messina served as our Vice President - Global Sales and Access Control Products from 2013 until 2023. Mr. Messina began his career with Strattec in August 2008 and has held various management positions overseeing engineering and product development. Prior to joining Strattec, Mr. Messina was a Chief Engineer for Delphi Corporation.

Chey Varto has served as our Senior Vice President, Chief Commercial Officer since November 2024. She previously served as Chief Commercial Officer at Vayan Group, a leading provider of quality assurance solutions for automotive OEMs. Prior to that, she held leadership roles at Clarios, JD Norman Industries, and GST AutoLeather. She began her career at Lear Corporation where she advanced through roles of increasing responsibility.

Available Information

We maintain our corporate website at www.strattec.com and make available, free of charge, our Code of Business Ethics, and reports that we file with the Securities and Exchange Commission. We are not including all the information contained on or made available through our website as a part of, or incorporating such information by reference into, this Annual Report on Form 10-K.

7

ITEM 1A. RISK FACTORS

Investors and readers should carefully consider each of the risks, assumptions, uncertainties and other factors described below and elsewhere in this Annual Report, as well as any amendments or updates reflected in subsequent filings with the Securities and Exchange Commission. We believe these risks, assumptions, uncertainties and other factors, individually or in the aggregate, could cause our actual results to differ materially from expected and historical results and could materially and adversely affect our business operations, results of operations, financial condition and liquidity.

Business Risks

Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share

In fiscal 2025, our three largest customers, General Motors Company, Ford Motor Company and Stellantis, accounted for 29%, 23% and 12%, respectively, of our annual sales, compared to 30%, 21% and 14%, respectively, in fiscal 2024. The contracts with these customers provide for meeting the customer’s requirements for a particular vehicle model with our products. The contracts do not specify a quantity of parts to be supplied over the life of the vehicle, which averages approximately four to five years. Components for certain customer models may also be “market tested” annually. Therefore, the loss of any one of these customers, the early cancellation or breach by either party of a contract for a specific vehicle model, a reduction in vehicle content, the early cancellation of a specific vehicle model, technological changes or a significant reduction in demand for certain models could occur, and if so, could have a material adverse effect on our existing and future revenue, operating results, financial condition and cash flows.

We also make investments in machinery and equipment used exclusively to manufacture products for specific customer programs. This machinery and equipment is capitalized and depreciated over the expected useful life of each respective asset. Therefore, the loss of any one of our major customers, the loss of specific vehicle models or the early cancellation of a vehicle model could result in impairment in the value of these assets.

Production Slowdowns by Customers

Our business depends on, and is directly affected by, the global automobile industry. Our major customers and many of their suppliers can be significantly impacted by unfavorable global economic and industry conditions. In the past, many of our major customers have instituted production cuts and shuttered plants in light of these unfavorable conditions which adversely impacts demand for our products during these slowdowns and shutdowns. While production has increased and plants have reopened after these events, any additional economic slowdowns, global conflicts, pandemics or part supply shortages could bring about new production cuts which could have a material adverse effect on our revenue, operating results, financial condition and cash flows. Furthermore, uncertain economic conditions and inflation may contribute to a reduction in consumer demand, which may reduce vehicle production over at least the next several quarters.We cannot be certain of the severity and length of the continued volatility in the global automotive market, and the extent of the adverse effect that such volatility could have on our results of operations, financial condition, and business in the long term.

Cross-border Trade Issues and Tariffs

Our operations are impacted by international or cross-border trade dynamics, particularly the import and export of products and goods into and out of the United States. The shipping of goods across national borders is often more expensive and complicated than domestic shipping. Customs and duty procedures and reviews, including duty-free thresholds in various key markets, the application of tariffs, and security-related governmental processes at international borders, may increase costs, discourage cross-border purchases, delay transit and create shipping uncertainties. The imposition of non-tariff barriers, including localized content rules and government procurement restrictions, may further limit our ability to operate efficiently across borders.

We manufacture our products in Mexico and rely on a global supply chain to provide raw materials and components that we need to manufacture our products. Our business benefits from certain free trade agreements, such as the United States-Mexico-Canada Agreement ("USMCA"). However, recent shifts in trade policy have resulted in new or higher tariffs on goods imported from numerous countries, and some countries have imposed retaliatory tariffs on imports from the United States, which has created meaningful uncertainty. These changes may result in significantly increased production costs, pricing volatility and administrative complexity in determining country-of-origin compliance for automotive components.

In addition to potential increases in customs duties and tariffs in the United States and other countries, the USMCA is subject to renewal in 2026. There can be no assurance that the USMCA will be renewed or, if renewed, any newly negotiated terms in the USMCA will not adversely affect our business. Also, China presents unique risks to U.S. automotive manufacturers due to the strain in U.S.-China

8

relations and the level of integration with key components in our global supply chain. It remains unclear what additional actions the current U.S. administration may take with respect to trade issues involving China and other countries.

Changes in U.S. trade relations with foreign countries involved in our business, including but not limited to Mexico, Canada, China, and European countries, could have a material effect on global economic conditions and significantly decrease global trade, which could adversely impact our production costs, purchased material costs, ability to compete, customer demand, short-term vehicle production levels and relationships with suppliers and customers. The ultimate impact of changes to tariffs and trade barriers will depend on a number of factors that are not yet known or are subject to change, including the timing, amount, scope and nature of any tariffs and trade barriers that are implemented.

Highly Competitive Automotive Supply Industry

The automotive component supply industry is highly competitive. New business is typically awarded to the supplier offering the most favorable combination of technological innovation, quality, delivery and price. There can be no assurance that we will be able to compete successfully with the products of our competitors. Our competitors' efforts to grow market share could exert downward pressure on our product pricing and margins. Vertical integration by competitors and customers, as well as within our supply chain, could complicate and impact sourcing decisions by our customers and adversely affect our sales. Some of our competitors may have larger customer bases and significantly greater financial, technical, and marketing resources than we do. These factors may allow our competitors to respond more quickly than we can to new or emerging technologies and changes in customer requirements by devoting greater resources than we can to the development, promotion and sale of automotive aftermarket products. Increased competition could put additional pressure on us to reduce prices or take other actions, which may have an adverse effect on our business, sales, financial condition and results of operations. We may also lose significant customers or lines of business to competitors.

Cyclicality and Seasonality in the Automotive Market

Historically, our operating results have fluctuated by quarter based on the ebbs and flows of automotive vehicle production levels. The automotive market is cyclical and is dependent on consumer spending, on the availability of consumer credit, interest rates, fuel prices, consumer preference and confidence, and to a certain extent, on customer sales incentives. Economic factors adversely affecting consumer demand for automobiles and automotive production, could adversely impact our financial results.

Market Acceptance of New or Enhanced Products

The growth of the Company's business will be dependent on the demand for innovative products. In order to increase sales in current markets and gain entry into new markets, the Company must innovate to maintain and improve existing products while successfully developing and introducing distinctive new and enhanced products that anticipate changing customer and consumer preferences and capitalize upon emerging software technologies, including hybrid and electric vehicle advances. We principally compete for new business at the beginning of the development of new models and upon the redesign of existing models by our customers. New model development generally begins two to five years prior to the marketing of such new models. The failure to obtain new business on new vehicle models or to retain or increase business on redesigned existing models could result in reduced net sales. In addition, we may incur significant product development expenses in preparing to meet anticipated customer requirements which may not be recovered.

Joint Ventures

Certain of our operations are conducted through a joint venture with ADAC Automotive. With respect to our joint venture, we may share ownership and management responsibilities with a partner that may not share our goals and objectives. Operating a joint venture requires us to manage the business pursuant to the terms of the agreement that we entered into in fiscal 2007 with our partner, which may require additional organizational formalities, as well as the sharing of information and decision making. Additional risks associated with joint ventures include one or more partners failing to satisfy contractual obligations, the ability to enforce such obligations, conflicts arising between us and our partner, a change in the ownership of any of our partners and a reduced ability to control compliance with applicable rules and regulations. Additionally, our ability to sell our interest in a joint venture may be subject to contractual and other limitations. Accordingly, any such occurrence could adversely affect our financial condition, operating results and cash flows.

Operational Risks

Shortages, Increases in Costs, or Other Restrictions on the Availability of Raw Materials or Components Supply

If any of our customers experience a material supply shortage, either directly or as a result of supply shortages at another supplier, that customer may halt or limit the purchase of our products. Similarly, if we or one of our own suppliers experiences a supply shortage, we may become unable to produce the affected products if we cannot procure the components from another source. Such disruptions may

9

arise due to any number of issues including catastrophic events such as natural disasters, global pandemics, war, rapid increases in demand, or unforeseen economic challenges like prolonged inflation or elevated interest rates. These shortages could impact our ability to meet production schedules for key products and could have a material adverse effect on our business, results of operations, financial condition and cash flows.

During recent fiscal years, we have experienced higher costs on raw materials and purchased components, as well as freight costs. The continuation or renewal of these cost increases could have a material adverse effect on our future revenue, financial results, financial condition and cash flows.

In order to manage and reduce the costs of purchased goods and services, we have been rationalizing and consolidating our supply base. As a result, there is greater dependence on fewer sources of supply for certain components and materials used in our products. We consider the production capacities and financial condition of suppliers in our selection process, and expect them to meet our delivery requirements. However, there can be no assurance that strong demand, capacity limitations, shortages of raw materials, labor disputes or other problems will not result in any shortages, cost increases, or other restrictions on the availability of raw materials or components supplied to us.

Foreign Operations

We operate manufacturing operations in Mexico. As these operations continue to expand, their success will depend, in part, on our ability to anticipate and effectively manage certain risks inherent in international operations, including: enforcing agreements and collecting receivables through certain foreign legal systems, payment cycles of foreign customers, compliance with foreign tax laws, general economic and political conditions in these countries and compliance with foreign laws and regulations.

Cyber Vulnerability

In the ordinary course of business, we collect and store sensitive data, including our proprietary business information and that of our customers, suppliers and business partners, as well as personally identifiable information of our customers and employees, in our internal data centers, cloud services and on our networks. The secure processing, maintenance and transmission of this information is critical to our operations and business strategy. Cybersecurity attacks are becoming more sophisticated and include, but are not limited to, malicious software attempts to gain unauthorized access to data, and other electronic security breaches that could lead to disruptions in critical systems, unauthorized release of confidential or otherwise protected information, corruption or destruction of data and other manipulation or improper use of systems or networks. Cybercriminals have increasingly demonstrated advanced capabilities, such as use of zero-day vulnerabilities, and rapid integration of new technology such as generative artificial intelligence. Despite our security measures, our information technology and infrastructure, as well as that of our partners, customers and suppliers, may be vulnerable to malicious attacks, breaches or system failures due to employee error, malfeasance or other disruptions, including as a result of rollouts of new systems. Any such breach or operation failure would compromise our networks or that of our business partners, customers or suppliers, and the information stored could be accessed, publicly disclosed, lost or stolen, cause transaction processing errors, processing inefficiencies, delays or cancellation of customer orders, the loss of customers, impediments to the manufacturing or shipment of products, or other business disruptions. Such access or other loss of information could result in legal claims or proceedings, regulatory fines or penalties, disruption in our operations, damage to our reputation, loss of confidence in our products and services, increased costs, or the loss of assets, any of which could have a negative impact on our business, results of operations, financial condition and cash flows.

In addition, as security threats, cybersecurity, data privacy and protection laws and regulations continue to evolve and increase in terms of sophistication, we may be required to or choose to invest additional resources in the security of our systems. Any such increased level of investment could adversely affect our financial condition or results of operations.

Qualified Personnel

Our business success depends, to a significant degree, on attracting and retaining qualified personnel. Our ability to sustain and grow our business requires us to hire, retain, develop and motivate a highly skilled and diverse management team and workforce. These types of employees are in high demand and often have competing employment opportunities. The labor market for skilled employees is highly competitive and we may lose key employees or be forced to increase their compensation to retain these types of employees. Failure to ensure that we have the leadership capacity with the necessary skill set and experience could impede our ability to deliver our growth objectives and execute our strategic plan. Organizational and reporting changes resulting from any future leadership transition or corporate initiatives could result in increased turnover. Additionally, any unplanned turnover or inability to attract and retain key employees could have a negative effect on our results of operations, including by significantly increasing our recruitment, training and other related employee costs. Moreover, the loss of key personnel, or the failure to attract qualified personnel, could have a material adverse effect on our business, results of operations, financial condition and cash flows.

10

Disruptions Due to Work Stoppages and Other Labor Matters

Our major customers and many of their suppliers have unionized workforces. Work stoppages or slowdowns experienced by our customers or their suppliers could result in slowdowns or closures of assembly plants where our products are included in assembled vehicles. A material work stoppage experienced by one or more of our customers or suppliers could have an adverse effect on our business and financial results.

In addition, all production associates at our Milwaukee facility are unionized. The current contract with our Milwaukee unionized associates is effective through November 1, 2025. We also have unionized associates at our Leon, Mexico facility. The current contract with our Leon unionized associates is effective through April 8, 2026. We may encounter labor disruption and we may also encounter unionization efforts in our other plants or other types of labor conflicts, any of which could have an adverse effect on our business, financial results, financial condition and cash flows.

Climate Change and Environmental, Social, and Governance (ESG) Matters

Natural disasters or extreme weather conditions resulting from global climate change could lead us, our customers or our suppliers to experience disruptions in operations or disruptions in the availability of key components, which could lead to a material adverse impact on our results of operations, financial condition and cash flows. We could also experience adverse impacts to our financial condition due to volatility in the cost or availability of capital, difficulty obtaining new business or entering into new supplier relationships, a possible loss of market share on our current product portfolio, fines and penalties or difficulty attracting and retaining a skilled workforce.

Further, various stakeholders, including customers, suppliers, lenders, regulators, investors and those in the workforce, are increasing their expectations for businesses to do more to combat global climate change and its impact, and to conduct their operations in an environmentally sustainable manner with appropriate oversight by senior leadership. A failure to respond to the expectations and initiatives of our stakeholders could result in damage to our reputation and relationships with various stakeholders.

In addition to the increased stakeholder focus on climate change, customer, investor, and employee expectations in sustainability have been rapidly evolving and increasing. The enhanced stakeholder focus on sustainability requires continuous monitoring of various and evolving regulations and standards and their associated requirements. Our failure, or that of our supply base, to adequately meet stakeholder expectations may result in, among other things, the loss of business, diluted market valuation, an inability to attract customers or an inability to attract and retain top talent that could adversely affect our business, financial condition or results of operations.

Financial Risks

Financial Distress of Automotive Supply Base

Unfavorable global, economic or industry conditions could result in the financial distress of the automotive supply base. Severe distress could lead to automotive suppliers filing for bankruptcy protection or ceasing operations. Such conditions may require us to provide financial assistance or other measures to ensure uninterrupted production. These conditions could have a material adverse effect on our existing and future revenues, financial results, financial condition and cash flows.

Cost Reduction

There is continuing pressure from our major customers to reduce the prices we charge for our products. This requires us to continually generate cost reductions, including reductions in the cost of components purchased from outside suppliers. If we are unable to generate sufficient production cost savings in the future to offset pre-programmed price reductions or additional price reduction demands, our gross margin and profitability will be adversely affected.

Currency Exchange Rate Fluctuations

We have manufacturing operations in Mexico, and as a result, a portion of our manufacturing costs are incurred in Mexican pesos. Therefore, fluctuations in the U.S. dollar/Mexican peso exchange rate may have a material effect on our profitability, cash flows and financial position and may significantly affect the comparability of our results between financial periods. Any depreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will adversely affect the cost of our Mexican operations when translated into U.S. dollars.

11

Program Volume and Pricing Fluctuations

We incur costs and make capital expenditures for new program awards based upon certain estimates of production volumes over the anticipated program life for certain vehicles. While we attempt to establish the price of our products to account for variations in production volumes, if the actual production of certain vehicle models is significantly less than planned, our net sales and net income may be adversely affected. We cannot predict our customers’ demands for the products we supply either in the aggregate or for particular reporting periods.

Existing Indebtedness and Ability to Access Capital Markets

From time to time we have relied on our existing credit facilities to provide us with adequate working capital to operate our business and fund our capital expenditures, including any expansion initiatives. Escalation of any global inflationary pressures on our operating results may impact our ability to satisfy our lending covenants in the short term. Additionally, we cannot provide assurance that we will be able to refinance, extend the maturity of, or otherwise amend the terms of our existing credit facilities, or that any refinancing, extension, or amendment will be on terms favorable to us or even on commercially reasonable terms. If our lenders reduce or terminate our access to amounts under our credit facilities, we may not have sufficient capital to fund our working capital needs and/or we may need to secure additional capital or financing to fund our working capital requirements or to repay outstanding debt under our credit facilities. Moreover, new credit facilities resulting from any refinancing of our existing facilities could have a significantly higher rate of interest and greater borrowing costs than our existing facilities. We can make no assurance that we will be successful in ensuring our availability of amounts under our credit facilities or in connection with raising additional capital and that any amount, if raised, will be sufficient to meet our cash flow requirements. If we are not able to maintain our borrowing availability under our credit facilities it may have a negative impact on our business, results of operations, financial condition and cash flows.

Legal and Regulatory Risks

Intellectual Property

We own intellectual property, including patents, trademarks, copyrights, and trade secrets, that are of importance to our business, in the aggregate. Our intellectual property plays an important role in maintaining our competitive position in the markets we serve. We may directly or through a supplied component utilize intellectual property in its products that requires a license from a third-party. While we believe that such licenses generally can be obtained by us, or supplier if a supplied component, we may not be able to obtain the necessary licenses on commercially acceptable terms or at all. Failure by us or our suppliers to obtain the right to use third-party intellectual property could preclude us from selling certain products, and developments or assertions by or against us relating to intellectual property rights, could have materially adverse effects on our business, operating results, financial condition, and cash flow.

Environmental, Safety and Other Regulations

We are subject to federal, state, local and foreign laws and other legal requirements related to the generation, storage, transport, treatment and disposal of materials as a result of our manufacturing and assembly operations. These laws include, among others, the Resource Conservation and Recovery Act (as amended), the Clean Air Act (as amended) and the Comprehensive Environmental Response, Compensation and Liability Act (as amended). We believe that our existing environmental management system is adequate for current and anticipated operations.

An environmental liability was established in 1995 for estimated costs to remediate an environmental matter impacting a portion of our Milwaukee facility. The contamination occurred in 1985 and, after initial remediation, is being monitored in accordance with federal, state and local requirements. Failure to comply with environmental regulations could result in fines, penalties, and legal liabilities, as well as damage to our reputation. Additionally, changes in environmental laws and regulations or in the enforcement of existing laws and regulations could result in increased compliance costs in excess of our existing liability or additional operating restrictions, which could adversely affect our business, financial condition, and results of operations.

Income Taxes

We are a U.S.-based multinational company subject to tax in multiple U.S. and foreign tax jurisdictions. Significant judgment is required in determining our global provision for income taxes, deferred tax assets or liabilities and in evaluating our tax positions on a worldwide basis. While we believe our tax positions are consistent with the tax laws in the jurisdictions in which we conduct our business, it is possible that these positions may be overturned by jurisdictional tax authorities, which may have a significant impact on our global provision for income taxes. We are also subject to ongoing tax audits. These audits can involve complex issues, which may require an extended period of time to resolve and can be highly subjective. Tax authorities may disagree with certain tax reporting positions taken by us and, as a result, assess additional taxes. Failure to comply with these tax laws and regulations could result in significant penalties,

12

fines, and interest charges. Additionally, changes in tax legislation or tax rates, including changes in the interpretation or enforcement of existing tax laws, could adversely affect our financial condition and results of operations.

Warranty Claims

We are exposed to warranty claims in the event that our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. We are engaged in ongoing discussions with our customers regarding warranty information and potential claims. The results of these discussions could result in additional warranty costs in future periods. Depending on the nature of and the volume of vehicles involved in the potential warranty claims, these costs could be material to our financial statements. As additional information becomes available, actual warranty results may differ from recorded reserves or we may need to record additional warranty provisions. If our customers demand higher warranty-related cost recoveries, or if our products fail to perform as expected, it could have a material adverse impact on our results of operations, financial condition and cash flows.

Other Legal Proceedings

We are involved in various legal and regulatory proceedings and claims that, from time to time, may be significant. These are typically claims that arise in the normal course of business, including, without limitation, commercial or contractual disputes, including disputes with our customers, suppliers or competitors, intellectual property matters, personal injury claims, environmental matters, tax matters, employment matters and antitrust matters. No assurances can be given that such proceedings and claims will not adversely affect our financial condition, operating results and cash flows.

Other Risks

Pandemics, Epidemics and Infectious Disease Outbreaks

Pandemics or disease outbreaks have disrupted, and may continue to disrupt, the global economy. Because we and our suppliers manufacture products in facilities around the world, we may be vulnerable to an outbreak of infectious disease in the regions in which we, or our customers or suppliers, operate. The effects of infectious disease outbreaks have included and may continue to include disruptions or restrictions on our ability to travel, our ability to manufacture our affected products and our ability to ship these affected products to customers as well as disruptions that have and may continue to affect our key customers and suppliers, including those in these regions or other affected regions of the world, including in the United States, Mexico, China and neighboring countries. Current and future disruption of our ability to manufacture or distribute our products or of the ability of our customers to take orders of our products or our suppliers to deliver key raw materials on a timely basis could have a material adverse effect on our sales levels, pricing for raw materials and components and our operating results. In addition, future outbreaks of contagious diseases in the human population could result in a widespread health crisis that adversely affects the economies and financial markets of many countries (including those where we operate or where our products are ultimately used), resulting in an economic downturn that could affect demand for our products and impact our operating results.

Geopolitical Instability

We are currently operating in a period of geopolitical instability, which has significantly contributed to economic uncertainty, capital market disruption and supply chain interruptions in the U.S. and global markets. While the length and impact of the ongoing global conflicts are unpredictable, they could lead to further market disruptions, including supply chain interruptions and significant volatility in commodity prices, and in credit and capital markets. The ongoing conflicts have led to sanctions and other penalties being levied by the U.S., the EU, and other countries. Additional potential sanctions and penalties have also been proposed. These global conflicts, as well as future geopolitical conflicts, could adversely affect the global economy and financial markets and lead to instability and lack of liquidity in capital markets, potentially further disrupting the supply chain for necessary components and raw materials used by us or our customers in producing product. Any of the foregoing factors could have a material adverse effect on our business, operating results, financial condition and cash flows.

13

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 1C. CYBERSECURITY

Governance

The Company conducts regular assessments of cybersecurity risks both internally and with third party assistance Information Technology Director reports on the results of these assessments and corresponding recommendations to the full Board of Directors at least annually.We use the National Institute of Standards and Technology ("NIST") framework to regularly assess the threat landscape and support a cybersecurity strategy based on prevention, detection and mitigation. In general, the Company seeks to address cybersecurity risks through a cross-functional approach that is focused on preserving confidentiality, managing data security and availability and effectively responding to cybersecurity incidents when they occur.Management's philosophy on cybersecurity is to be vigilant in protecting the Company through investments in tools and employee awareness to aid in the prevention, detection and mitigation of cyber threats, while recognizing that not all threats are preventable.

The Company's Information Technology Director and Chief Financial Officer, along with cybersecurity personnel on their respective teams, are responsible for developing cybersecurity programs, as may be required by applicable law or regulation. Our cybersecurity personnel have the appropriate expertise in IT and cybersecurity, which generally has been gained from a combination of education, including relevant degrees and/or certifications, and prior work experience.

Risk Management and Strategy

Among other best practices, we use multi-factor authentication wherever possible for external access to systems, assess and update current versions of security solutions, perform annual cybersecurity training and email phishing campaigns for employees, use third parties to perform external penetration testing, and maintain disaster recovery and incident response plans.We employ a combination of methods to monitor for new or developing cybersecurity risks.Incidents, if any, are escalated to management and the Board according to our incident response policy. Through these processes, we did not identify risks from current or past cybersecurity incidents that have materially affected or are reasonably likely to materially affect our business strategy, results of operations, or financial condition. However, despite our efforts, we cannot eliminate all risks from cybersecurity threats, or provide assurances that we have not experienced undetected cybersecurity incidents.

ITEM 2. PROPERTIES

We have five manufacturing plants, one warehouse, and two sales offices. We believe these facilities are well maintained and in good operating condition and are sufficient to meet our current needs. These facilities are described as follows:

Location Type Sq. Ft. Owned orLeased

Milwaukee, Wisconsin Corporate headquarters and manufacturing 345,123 Owned

Juarez, Chihuahua Mexico Manufacturing 169,926 Owned

Juarez, Chihuahua Mexico Manufacturing 77,527 Owned

Juarez, Chihuahua Mexico Manufacturing 114,841 Owned

Leon, Mexico Manufacturing 130,532 Owned

El Paso, Texas Distribution warehouse 114,715 Leased **

Auburn Hills, Michigan Sales and engineering 62,736 Owned

Seoul, South Korea Sales and engineering 2,859 Leased **

** Leased unit within a complex.

ITEM 3. LEGAL PROCEEDINGS

In the normal course of business we may be involved in various legal proceedings. We do not believe we are currently involved in any claim, action or proceeding of which the ultimate disposition would have a material adverse effect on our financial condition, results of operations or cash flows.

14

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

15

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock is traded on the NASDAQ Global Market under the symbol “STRT.”

Registered shareholders of record at June 29, 2025, were 756. The number of stockholders of record is based upon the actual number of holders registered on this date and does not include holders of common stock in “street name” by brokers or other entities on behalf of stockholders.

ITEM 6. [RESERVED]

16

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following Management's Discussion and Analysis should be read in conjunction with the accompanying audited consolidated financial statements and notes.

Business Overview

Strattec Security Corporation is a leading global manufacturer and provider of highly engineered advanced automotive access and security products and solutions. Products include locks & locksets, vehicle start systems, engineered latches, power access solutions, door handles, keys & fobs and other vehicle access products. While the Company serves major automotive OEMs globally, the majority of sales are to the three largest automobile original equipment manufacturers in North America.

Current Business Update

Our financial results for fiscal 2025 represented a significant improvement over prior year and included $565.1 million in sales (+5.1% increase year-over-year) and $18.7 million in net income attributable to Strattec (or $4.58 per share compared to $4.07 per share in the prior year). Cash flow from operations also increased year-over-year from $12.2 million in fiscal 2024 to $71.7 million in fiscal 2025. As we look forward and navigate macroeconomic challenges and fluctuating OEM production volumes, our operational discipline, product portfolio refinement, and cost control measures position us to continue to drive long-term shareholder value.

Market Demand

Volatility in the North American automotive industry is driven by supply chain disruptions, global inflation, thinning labor availability, rising global commodity costs and a changing global trade and geopolitical climate. These macro conditions, coupled with changes in production volumes by OEMs in response to new vehicle consumer demand, impact our sales and profitability levels. We delivered 5% sales growth in fiscal 2025, the result of new program launches, pricing actions and increased volumes on the platforms we serve. However, based on recent third party industry projections, it is expected that North American light vehicle production will be flat over the next several years with fiscal 2026 OEM production levels forecasted to be down approximately 5-6%, with a recovery in fiscal 2027 and 2028. Lower near term North American light vehicle production estimates, which are subject to change, are a result of recent tariff uncertainties and related demand impacts, coupled with a lower number of scheduled new platform launches by our addressable customers.

Trade Environment & Tariffs

In the second half of fiscal 2025 the United States government announced broad tariffs on goods imported into the U.S. from numerous countries, with certain exemptions such as USMCA-compliant imports. In response, multiple nations have countered with reciprocal tariffs and other actions. Since that time, reciprocal tariffs have continued to evolve and the fact pattern remains uncertain. Like other automotive suppliers, we source raw materials and components from a global supply chain with final assembly for our products completed in our Mexico operations. We ship approximately 65% of our sales (the majority of which are USMCA compliant) to customer production sites in the United States, with the balance shipped to other countries. We continue to monitor the dynamic global trade environment and are taking actions to mitigate the cost impact of additional tariffs and understand any associated changes in customer demand and production build schedules. Prior to mitigation efforts, we estimate that the annual impact of the recently enacted tariffs as of August 2025 is a $5 -$7 million increase in our cost of goods sold. We have already mitigated a majority of the cost increase through changes in our global supply chain, pass through of costs to customers and changes in our logistics processes. We will continue to pursue commercial recoveries in an effort to fully offset the cost increase.

Global Conditions

Due to our operations in Mexico, our financial results are impacted by labor inflation, the result of government mandated minimum wages, and we have exposure to changes in foreign currency exchange rates. We strive to mitigate the impact of these cost increases through supply chain and manufacturing efficiencies, strategic pricing and peso forward contracts. During fiscal 2025 we have taken actions to improve our cost structure, including a restructuring of our Milwaukee and Mexico operations. The restructuring activities are expected to generate approximately $5 million of annual cost reductions.

Business Transformation

Our strategic priority is to execute on a business transformation to strengthen the Company’s profitability and deliver sustainable sales growth. We expect to improve our business with upgraded systems and processes, modernization of our support functions and a focus

17

on productivity and efficiencies in our manufacturing operations. We believe this will result in an optimized cost structure and consistent cash generation through improved working capital velocity and efficient asset utilization. In the short term, cash generated from our operations will be reinvested in our business to fund our transformational efforts and growth initiatives. To drive organic growth, we will leverage our technical engineering expertise, market-leading positions and strong customer relationships to generate innovative solutions and capture more content on current platforms, win new platforms with current customers, gain new customers both domestically and abroad and build opportunities in the broader transportation industry.

Analysis of Results of Operations

Year ended June 29, 2025 (fiscal 2025) compared with the year ended June 30, 2024 (fiscal 2024)

The Company's consolidated results of operations for the years ended June 29, 2025 and June 30, 2024 were as follows:

Years Ended Change

Operating margin 4.0 % 3.3 % 70 bp

Net income attributable to non-controlling interest 234 115 119 103 %

Earnings per share attributable to Strattec:

Net sales in fiscal 2025 totaled $565.1 million, representing an increase of $27.3 million, or 5%, compared to fiscal 2024 net sales of $537.8 million. The year-over-year increase was driven by $15.9 million of net new program launches as well as favorable mix. Additionally, higher production volumes on existing platforms and customer inventory builds increased sales by $13.9 million. Sales growth was broad based across most product categories. Sales volume increases more than offset a year-over-year reduction in pricing of $2.6 million. The reduction in pricing is a result of the prior year period including $9.7 million of one-time retroactive pricing recoveries, which was partially offset by current year margin accretive pricing.

Material costs increased $13.7 million on higher production levels while labor and overhead costs declined $5.5 million. Reduced conversion costs reflect a $13.6 million benefit from changes in foreign currency exchange rates a $1.4 million reduction in depreciation expense, $1.5 million of incremental tooling gains and a $1.4 million benefit from completed restructuring actions in the second half of fiscal 2025. These benefits were partially offset by incremental conversion costs due to higher sales volumes, a $6.2 million increase in Mexico labor costs, $2.5 million of tariff costs and additional provisions for annual bonus expense of $1.6 million.

Gross profit was $84.5 million in fiscal 2025, compared to $65.5 million in the comparable prior year period. Gross profit margin improved year-over-year from 12.2% to 15.0% as a result of the strengthening of the U.S. dollar, improved leverage of our fixed cost structure on higher sales volumes and the benefits of pricing and restructuring actions.

Selling, administrative, and engineering expenses increased $14.1 million year-over-year. The prior year included a one-time $4.8 million recovery of engineering, design and development costs. Increased costs in the current year were the result of continued investments in the business, a $5.2 million increase in incremental incentive compensation and $1.0 million in business transformation

18

related costs. Both fiscal years included non-recurring executive transition expenses related to leadership changes, totaling $2.1 million in fiscal 2025 and $1.1 million in fiscal 2024.

Interest income increased $1.5 million due to increased levels of cash and cash equivalents, which are invested in overnight money market funds.

Other income, net decreased from $2.7 million in fiscal 2024 to $0.8 million in fiscal 2025, the result of changes in foreign currency exchange rates and increased non-service post-employment costs.

The effective income tax rate was 23.2% and 18.7% for fiscal 2025 and 2024, respectively. The effective rate for both periods differs from the statutory rate because of the foreign rate differential, state income taxes, research and development tax credits, limitations on the utilization of foreign tax credits and non-deductible items. Additionally, the 2024 effective tax rate was favorably impacted by changes in the estimate of our 2023 foreign tax credits associated with the sale of our interest in a prior joint venture.

Fiscal 2025 net income attributable to Strattec increased $2.4 million, or 15% from fiscal 2024, driven primarily by net sales growth and gross margin enhancement, partially offset by higher selling, administrative and engineering expenses due to investments in the business, incentive compensation costs and prior year favorable recoveries on engineering, design and development costs.

Liquidity and Capital Resources

At June 29, 2025, we had $84.6 million of cash and cash equivalents, of which $4.8 million was held by our foreign subsidiaries and $79.8 million was held domestically. Excess cash is held in money market funds. The following table summarizes our cash flows provided by (used in) operating, investing and financing activities (in millions):

Years Ended

Cash flows from:

Operating activities $ 71.7 $ 12.3

Investing activities (7.2 ) (7.8 )

Financing activities (4.9 ) —

Effect of exchange rate changes on cash (0.4 ) 0.3

Net increase in cash and cash equivalents $ 59.2 $ 4.8

Cash flow from operations improved to $71.7 million, from $12.3 million in the prior year. The increase in cash provided by operating activities was due to reduced purchasing levels on higher sales, collection of accounts receivable and the recovery of pre-production costs. Net cash used in investing activities was $7.2 million during fiscal 2025 compared to $7.8 million in the prior year period. Capital expenditures to support new product programs and the upgrade and replacement of existing equipment were $7.2 million in the current year period compared to $9.8 million in the prior year period. The prior year also included $2.0 million in proceeds received from the sale of our interest in a previous joint venture. Net cash used in financing activities resulted from the repayment of $5 million under our joint venture revolving credit agreement during fiscal 2025.

Primary Working Capital Management

We use primary working capital as a percentage of sales (PWC %) as a key metric of working capital management. We define this metric as the sum of net accounts receivable and net inventory less accounts payable, divided by the past three months sales annualized. The following table shows a comparison of primary working capital (dollars in millions):

Accounts payable (66 ) (11 %) (55 ) (10 %)

Cash Requirements and Contractual Obligations

Future Capital Expenditures

We anticipate capital expenditures will be approximately $13 million in fiscal 2026 in support of requirements for new product programs

19

and the upgrade and replacement of existing equipment.

Stock Repurchase Program

Our Board of Directors authorized a stock repurchase program on October 16, 1996, to buy back outstanding shares of our common stock. Shares authorized for buyback under the program totaled 3,839,395 at June 29, 2025. A total of 3,655,322 shares have been repurchased over the life of the program through June 29, 2025, at a cost of approximately $136.4 million or an average price of $37.32 per share. Currently, 184,073 shares remain available to be repurchased under the program. No shares were repurchased during fiscal 2025 or 2024. Additional repurchases may occur from time to time and are expected to be funded by cash flow from operations and current cash balances.

Credit Facilities

The Company has a $40 million secured revolving credit facility (the “Strattec Credit Facility”) with BMO Harris Bank N.A., while the joint venture has a $20 million secured revolving credit facility (the “ADAC-Strattec Credit Facility”) with BMO Harris Bank N.A., which is guaranteed by the Company. Availability under the ADAC-Strattec Credit Facility is reduced to $18 million on August 1, 2025.

There were no outstanding borrowings and no interest due on the Strattec Credit Facility and $8 million drawn on the ADAC-Strattec Credit Facility as of June 29, 2025. Any balance drawn on these facilities and the related interest payment obligations are expected to be funded by cash flow from operations and current cash balances.

Income Taxes

We may be required to make cash outlays related to our unrecognized tax benefits, including interest and penalties. As of June 29, 2025, we had unrecognized tax benefits, including interest and penalties, of $1.9 million. However, due to the uncertainty of the timing of future cash flows associated with our unrecognized tax benefits, we are unable to make reasonably reliable estimates of the period of cash settlement, if any, with the respective taxing authorities. For further information related to our unrecognized tax benefits, see Note 6, "Income Taxes," for additional information.

Other Cash Requirements

We anticipate payments of $10.0 million to associates in connection with our incentive bonus plan during the first quarter of fiscal 2026 related to bonuses earned in fiscal 2025.

We have an operating lease for our El Paso, Texas distribution warehouse, which has a term in excess of one year. Refer to required future payments under the lease in Note 5, "Leases".

Critical Accounting Estimates

We prepare our consolidated financial statements in conformity with U.S. GAAP. This requires management to make estimates and assumptions that affect reported amounts and related disclosures. Actual results could differ from those estimates. The following estimates are considered by management to be the most critical in understanding judgments involved in the preparation of our consolidated financial statements and uncertainties that could impact our results of operations, financial position and cash flow.

Revenue Recognition

We enter into contracts with our customers generally at the beginning of a vehicle's lifecycle. Typically, these contracts do not provide for a specified quantity of products, but once entered into, we are often expected to fulfill our customers' purchasing requirements for the life of the vehicle. These contracts may be terminated by our customers at any time. Historically, terminations of these contracts have been infrequent.

Throughout a vehicle's lifecycle, we receive purchase orders from our customers, which provide the commercial terms for a sale transaction. Revenue is typically recognized at a point in time based on the transaction price and the quantity of parts shipped to the customer. Discrete price adjustments may occur during the vehicle production period in order for the Company to remain competitive with market prices or based on changes in product specifications or based on changes in significant input costs for the products. In the event the Company concludes that a portion of the revenue for a given product may vary from the purchase order, the Company records

20

consideration at the most likely amount to which the Company expects to be entitled based on historical experience and input from customer negotiations.

Warranty

We have a warranty reserve recorded related to our exposure to warranty claims in the event our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. The recorded warranty reserve balance involves judgment and estimates. Our reserve estimate is based on an analysis of historical warranty data as well as current trends and information. Actual warranty costs might differ from estimates due to the level of actual claims varying from our historical claims experience and estimates and final negotiations and settlements reached with our customers. Therefore, future actual claims experience could result in changes in our estimates of the required reserve. Sensitivity of potential warranty claims is dependent on the respective customer platform, volumes, production years and product content.

Income Tax

Judgment is required to determine the annual effective income tax rate, deferred tax assets and liabilities, reserves for unrecognized tax benefits and any valuation allowances recorded against net deferred tax assets. Our effective income tax rate is based on annual income, statutory tax rates, tax planning opportunities available in the various jurisdictions in which we operate and other adjustments. Tax regulations require items to be included in our tax returns at different times than these same items are reflected in our consolidated financial statements.

As a result, these differences and the interplay in tax laws between jurisdictions may cause the Company's estimates of income tax liabilities to differ from actual payments or assessments. Some of these differences are permanent, such as expenses that are not tax deductible, while others are temporary differences, such as amortization and depreciation expenses. Temporary differences create deferred tax assets and liabilities, which are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. We establish valuation allowances for our deferred tax assets when the amount of expected future taxable income is not large enough to utilize the entire deduction or credit. Relevant factors in determining the realizability of deferred tax assets include future taxable income, the expected timing of the reversal of temporary differences, tax planning strategies and the expiration dates of the various tax attributes. At June 29, 2025 and June 30, 2024, the valuation allowance related to deferred tax assets was $3.9 million and $2.6 million, respectively.

While the Company has support for the positions it takes on tax returns, taxing authorities may assert different interpretations of laws and facts and may challenge cross-jurisdictional transactions. We assess our income tax positions and record tax liabilities for all years subject to examination based upon management’s evaluation of the facts and circumstances and information available at the reporting dates. For those tax positions which do not meet the more-likely-than-not threshold regarding the ultimate realization of the related tax benefit, no tax benefit has been recorded in the financial statements. As of June 29, 2025 and June 30, 2024, our liability for unrecognized tax benefits was $1.9 million and $1.6 million, respectively.

Post-employment Benefits

We have post-employment liabilities, including a supplemental executive retirement plan, termination indemnity plans and seniority premium obligations that are developed from actuarial valuations. These valuations include key assumptions regarding discount rates, expected return on plan assets and rate of compensation increases. We consider current market conditions in selecting these assumptions. While the Company believes that these assumptions are appropriate, significant differences in actual experience or significant changes in assumptions may materially affect the Company’s liability or future expense.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable.

21

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the Board of Directors of Strattec Security Corporation

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Strattec Security Corporation and subsidiaries (the "Company") as of June 29, 2025 and June 30, 2024, the related consolidated statements of income and comprehensive income, shareholders' equity, and cash flows, for the fiscal years ended June 29, 2025 and June 30, 2024, and the related notes (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of June 29, 2025 and June 30, 2024, and the results of its operations and its cash flows for the fiscal years ended June 29, 2025 and June 30, 2024, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of June 29, 2025, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated August 25, 2025, expressed an unqualified opinion on the Company's internal control over financial reporting.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Specific Warranty Reserve – Refer to Note 2 to the Financial Statements

Critical Audit Matter Description

The Company records a specific warranty reserve for known warranty claims when its products fail to perform as expected and when it is probable that they will participate in the repair costs incurred by its customers for such products.

The specific warranty reserve is estimated based on management’s analysis of historical warranty data, current trends and information, known and projected claims for products sold, and the terms of specific agreements. The specific warranty reserve requires management to apply significant judgment to develop its estimate. Actual warranty costs may differ from management’s estimated costs as a result of, but not limited to, negotiation with customers, changes to the assumptions of repair and/or replacement costs, and repair rate. Such matters may require future adjustments to the reserve which could be material.

22

We identified a certain specific warranty reserve as a critical audit matter because estimating future warranty costs requires significant judgment by management. Auditing management’s assumptions about management’s estimated future warranty costs involves a high degree of auditor judgment and an increased extent of effort to evaluate the reasonableness of management’s estimates.

How the Critical Audit Matter Was Addressed in the Audit

Our audit procedures related to the determination of the certain specific warranty reserve included the following, among others:

- We tested the effectiveness of internal controls relating to management’s process for developing the assumptions and inputs used to estimate the certain specific warranty reserve.

- We evaluated the methods and significant assumptions, including the frequency and average cost of warranty claims, used by management to estimate the certain specific warranty reserve by:

o Evaluating the methodology used to determine the certain specific warranty reserve in order to understand how key assumptions were developed.

o Testing the accuracy of the underlying data that served as the basis for the analysis, including the historical claims, potential disputes, and settlements paid on those claims.

o Testing the completeness of the certain specific warranty reserve by conducting inquiries of operational and executive management regarding knowledge of known product warranty claims or product issues and evaluating whether they were appropriately considered in the determination of the certain specific warranty reserve.

o Testing the mathematical accuracy of management’s calculation of the certain specific warranty reserve.

/s/ Deloitte & Touche LLP

Milwaukee, Wisconsin

August 25, 2025

We have served as the Company's auditor since 2023.

23

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the Board of Directors of Strattec Security Corporation

Opinion on Internal Control over Financial Reporting

We have audited the internal control over financial reporting of Strattec Security Corporation and subsidiaries (the "Company") as of June 29, 2025, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of June 29, 2025, based on criteria established in Internal Control — Integrated Framework (2013) issued by COSO.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated financial statements as of and for the year ended June 29, 2025 of the Company and our report dated August 25, 2025 expressed an unqualified opinion on those financial statements.

Basis for Opinion

The Company's management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management's Annual Report on Internal Controls over Financial Reporting. Our responsibility is to express an opinion on the Company's internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control over Financial Reporting

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ Deloitte & Touche LLP

Milwaukee, Wisconsin

August 25, 2025

24

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF INCOME

(in thousands, except per share amounts)

Years Ended

Selling, administrative and engineering expenses 61,793 47,654

Income before income taxes and non-controlling interest 24,636 20,203

Net income attributable to non-controlling interest 234 115

Net income attributable to Strattec $ 18,685 $ 16,313

Earnings per share attributable to Strattec

The accompanying notes are an integral part of these Consolidated Financial Statements.

25

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(in thousands)

Years Ended

Other comprehensive (loss) income, net of tax:

Currency translation adjustments (1,170 ) (2,794 )

Pension and postretirement plans 281 193

Total other comprehensive loss, net of tax (889 ) (2,601 )

Comprehensive loss attributable to non-controlling interest (231 ) (991 )

Comprehensive income attributable to Strattec $ 18,261 $ 14,818

The accompanying notes are an integral part of these Consolidated Financial Statements.

26

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(in thousands, except share amounts and per share amounts)

ASSETS

Current Assets:

Inventories:

Noncurrent Assets:

Property, plant and equipment:

LIABILITIES AND SHAREHOLDERS' EQUITY

Current Liabilities:

Noncurrent Liabilities:

Borrowings under credit facilities 8,000 13,000

Shareholders' Equity:

Accumulated other comprehensive loss (16,113 ) (15,689 )

Total Liabilities and Shareholders' Equity $ 391,454 $ 364,289

27

The accompanying notes are an integral part of these Consolidated Financial Statements.

28

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

(in thousands, except per share amounts)

Currency translation adjustments — — — (1,688 ) — (1,106 ) (2,794 )

Purchase of former joint venture non-controlling interest — (775 ) — — - (775 )

Stock-based compensation — 1,467 — — — - 1,467

Employee stock purchases 1 23 — — 48 - 72

Currency translation adjustments — — — (705 ) — (465 ) (1,170 )

Stock-based compensation — 2,725 — — — — 2,725

Employee stock purchases — 35 — — 26 — 61

The accompanying notes are an integral part of these Consolidated Financial Statements.

29

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

Years Ended

OPERATING ACTIVITIES:

Foreign currency transaction loss (gain) 591 (2,153 )

Stock-based compensation expense 2,725 1,467

Unrealized gain on peso contracts (2,314 ) —

Change in operating assets and liabilities:

Net cash provided by operating activities 71,677 12,265

INVESTING ACTIVITIES:

Proceeds from sale of interest in joint ventures — 2,000

Purchase of property, plant and equipment (7,156 ) (9,788 )

Net cash used in investing activities (7,156 ) (7,788 )

FINANCING ACTIVITIES:

Borrowings under credit facilities 3,000 2,000

Repayments under credit facilities (8,000 ) (2,000 )

Employee stock purchases 61 72

Net cash (used in) provided by financing activities (4,939 ) 72

Foreign currency impact on cash (413 ) 290

NET INCREASE IN CASH AND CASH EQUIVALENTS 59,169 4,839

CASH AND CASH EQUIVALENTS:

SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION:

Cash paid during the period for:

Non-cash investing activities:

Change in capital expenditures in accounts payable $ (422 ) $ 171

The accompanying notes are an integral part of these Consolidated Financial Statements.

30

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

NOTE 1. ORGANIZATION AND NATURE OF BUSINESS

Strattec Security Corporation ("the Company," "Strattec," "we," or "us"), headquartered in Milwaukee, Wisconsin, is a leading global provider of advanced automotive security, access and user interface solutions. While the Company serves major automotive OEMs globally, the majority of sales are to the three largest automobile original equipment manufacturers (“OEMs”) in North America.

NOTE 2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Principles of Consolidation and Basis of Presentation

The accompanying consolidated financial statements of the Company have been prepared in accordance with United States generally accepted accounting principles (U.S. GAAP) and reflect the consolidated results of Strattec. All significant intercompany transactions and balances have been eliminated in consolidation. The Company's fiscal year ends on the Sunday nearest June 30. The years ended June 29, 2025 and June 30, 2024 are each comprised of 52 weeks.

Use of Estimates

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue and expenses for the periods presented. These estimates and assumptions could also affect the disclosure of contingencies. Actual results and outcomes may differ from management’s estimates and assumptions.

Recently Issued Accounting Standards

In fiscal 2025, we adopted the guidance in Accounting Standards Codification (ASC) 280-10 as updated by Accounting Standards Update (ASU) 2023-07, Improvements to Reportable Segment Disclosures, which requires companies -- even for entities with a single reportable segment -- to disclose their significant segment expenses that are regularly provided to the Chief Operating Decision Maker (CODM), details of the composition of other segment items, and the title and position of the CODM along with an explanation of how the CODM uses the reported measures in assessing performance. Refer to Note 14, "Segment Information" for additional information.

In December 2023, the Financial Accounting Standards Board (FASB) issued ASU 2023-09, Income Taxes (Topic 740): Improvements to Income Tax Disclosures. This ASU is intended to enhance the transparency and decision usefulness of income tax disclosures to provide information to better assess how an entity's operations and related tax risks and tax planning and operational opportunities affect its tax rate and prospects for future cash flows. For the Company, this ASU is effective for annual periods beginning after December 15, 2024 (fiscal 2026). The Company is currently evaluating the impact the adoption of this standard will have on its consolidated financial statements.

In November 2024, the FASB issued ASU 2024-03, Income Statement – Reporting Comprehensive Income – Expense Disaggregation Disclosures (Subtopic 220-40): Disaggregation of Income Statement Expenses. This ASU requires more detailed information about specified categories of expenses (purchases of inventory, employee compensation, depreciation, intangible asset amortization and depletion) included in certain expense captions presented on the face of the income statement. The ASU is effective for fiscal years beginning after December 15, 2026 (fiscal 2028) and for interim periods beginning after December 15, 2027 (fiscal 2029). The Company is currently evaluating the impact the adoption of this standard will have on its consolidated financial statements.

Cash and Cash Equivalents

Cash and cash equivalents include all short-term investments with an original maturity of three months or less due to the short-term nature of the instruments. Excess cash balances are invested in money market funds.

Receivables

Receivables are stated net of an allowance for credit losses. The collectability of receivables is evaluated on an ongoing basis. An allowance for credit losses is recorded for estimated amounts of receivables not expected to be collected based upon factors such as age of the outstanding receivables, historical payment experience, customer creditworthiness and general economic conditions.

31

Inventories

Inventories are comprised of material, direct labor and manufacturing overhead, and are stated at lower of cost or market, with market determined based on estimated net realizable value using the first-in, first-out (“FIFO”) cost method.

Excess and obsolete inventory reserves are recorded based on historical and estimated future demand and market conditions. The reserve level is determined by comparing inventory levels of individual raw materials, components and finished goods to historical usage and assessing the age of the inventory and likelihood of future sales. Technical obsolescence and other known factors are also considered in evaluating the reserve level. The increase in the reserve in fiscal 2025 was driven by changes in the inventory profile and resulting revisions to estimates of excess and obsolete inventory. The excess and obsolete reserve balance was $11.2 million at June 29, 2025 compared with $7.8 million at June 30, 2024.

Pre-production Costs

The Company incurs costs related to tooling used in the manufacture of products sold to its customers and engineering development. In some cases, the Company enters into contracts with its customers whereby the Company incurs the costs to design, develop and purchase tooling and is then reimbursed by the customer under a reimbursement contract. In addition, certain customer contracts include reimbursement of engineering development costs. Tooling costs and engineering development costs that will be reimbursed by customers are included in other Pre-production Costs in the accompanying consolidated balance sheets at lower of accumulated cost or the customer reimbursable amount. To the extent that costs incurred exceed the contractual reimbursement, amounts are recognized as expense in the accompanying consolidated income statement when incurred.

Value-Added Tax

The Company's Mexican subsidiaries are subject to value-added tax (“VAT”). VAT is paid on goods and services and collected on sales. A VAT certification generally allows for relief from VAT tax for temporarily imported goods. A temporary suspension of the Company's VAT tax certification during fiscal 2024 resulted in an increase in the value-added tax recoverable balance. During fiscal 2025, a portion of the value-added tax recoverable was collected. Remaining amounts are subject to an audit by the Mexican tax authority before VAT refunds will be received.

Property, Plant and Equipment

Property, plant and equipment are stated at cost. Plant and equipment are depreciated on a straight-line basis over the estimated useful lives of the assets. Land improvements have an estimated useful life of 20 years, while buildings and improvements range from 15 to 35 years, and machinery and equipment range from 3 to 15 years.

Long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. If such indicators are present, the recoverability of assets is assessed by a comparison of the carrying amount of an asset to future net undiscounted cash flows expected to be generated by the asset. If an asset is determined to not be recoverable, the impairment recognized is calculated as the excess of the carrying amount of the asset over the fair value of the asset.

Leases

The Company determines whether a contractual arrangement is or contains a lease at contract inception. A lease liability and corresponding right-of-use asset are measured and recognized based on the present value of lease payments. To determine the present value of lease payments, the Company uses its incremental borrowing rate as of the lease commencement date, unless there is a rate implicit in the lease agreement. The incremental borrowing rate is based on the Company's credit rating, determined on a fully collateralized loan basis from information available at commencement date, and the duration of the lease term.

Operating lease assets are included in operating lease right-of-use assets and the related liabilities are included in current lease liabilities and non-current lease liabilities in the accompanying consolidated balance sheets. For all classes of underlying assets, the Company accounts for leases that contain separate lease and non-lease components as containing a single lease component. The Company does not recognize lease right-of-use assets and lease liabilities from leases with an original lease term of twelve months or less and, instead, recognizes rent payments on a straight-line basis over the lease term in the consolidated statements of income. Refer to Note 5, "Leases," for additional information.

32

Research and Development Costs

Expenditures relating to the development of new products and processes, including significant improvements and refinements to existing products, are expensed as incurred. Research and development expenditures were $21.7 million in 2025 and $14.8 million in 2024.

Derivative Instruments

Derivative financial instruments are recognized as either assets or liabilities at fair value. The accounting for changes in the fair value of each derivative financial instrument depends on whether it has been designated and qualifies as an accounting hedge, as well as the type of hedging relationship identified. Cash flows for all derivative financial instruments are typically classified in cash flows from operating activities. Derivative instruments are not used for trading or speculative purposes.

During both fiscal 2025 and 2024, the Company entered into currency forward contracts covering a portion of peso denominated operating costs. The objective in entering into these contracts was to minimize earnings volatility resulting from changes in foreign currency exchange rates, specifically the Mexican peso / U.S. dollar exchange rate. These currency forward contracts are not designated as hedges and changes in fair value are recognized in Other income, net on the consolidated income statement.

Fair Value

The Company assesses the inputs used to measure the fair value of financial assets and liabilities using a three-tier hierarchy:

•

Level 1 -- Observable inputs that reflect quoted prices for identical assets or liabilities in active markets that we have the ability to access at the measurement date.

•

Level 2 -- Observable inputs, other than quoted prices included in Level 1, for the asset or liability or prices for similar assets and liabilities.

•

Level 3 -- Unobservable inputs that include management’s own judgments about the assumptions market participants would use in pricing an asset or liability.

The fair value of the Company's cash and cash equivalents, accounts receivable, post-employment plan assets, accounts payable and variable rate borrowings under revolving credit agreements approximated the book value at June 29, 2025 and June 30 2024, due to their short-term nature and the fact that the interest rates, as applicable, approximated market rates. The fair value of all derivative instruments were based on quoted inactive market prices and therefore are classified as Level 2 within the valuation hierarchy.

Warranty Reserve

The Company generally offers its customers an assurance warranty on products sold, although warranty periods may vary by product type and application. The Company has a warranty reserve related to known and potential exposure to warranty claims in the event products fail to perform as expected and in the event the Company may be required to participate in the repair costs incurred by customers for such products. The estimation of the warranty reserve involves judgment and assumptions and is based on an analysis of historical warranty data as well as current trends and information. Changes in estimates related to pre-existing warranties are included in provision charged to expense in the table below. Changes in the warranty reserve were as follows (in thousands):

Years Ended

Provision charged to expense (376 ) 2,608

33

Revenue from Contracts with Customers

The Company enters into contracts with customers to provide production parts generally at the beginning of a vehicle's lifecycle. Typically, these contracts do not provide for a specified quantity of products, but once entered into, the Company is often expected to fulfill our customers' purchasing requirements for the production life of the vehicle. Many of these contracts may be terminated by our customers at any time. However, terminations of these contracts have been infrequent, historically.

Revenue is recognized at a point in time when control of the product is transferred to the customer under the terms of the contract, which is when parts are shipped or delivered. The amount of revenue recognized is based on the transaction price and the quantity of parts specified in the contract. Discrete price adjustments may occur during the vehicle production period in order for the Company to remain competitive with market prices or based on changes in product specifications. Some of these price adjustments require estimation. In the event the Company concludes that a portion of the revenue for a given part may vary from the purchase order, the Company records consideration at the most likely amount to which the Company expects to be entitled based on historical experience and input from customer negotiations. The Company's customers pay for products received in accordance with payment terms that are customary within the industry.

Income Taxes

The Company records income tax expense using the liability method which specifies that deferred tax assets and liabilities be measured each year based on the difference between the financial statement and tax base of assets and liabilities at the applicable enacted tax rates. A valuation allowance is provided for deferred tax assets when management considers it more likely than not that the asset will not be realized. At June 29, 2025 and June 30, 2024, a valuation allowance has been provided for certain deferred tax assets which the Company has concluded are more likely than not to not be realized. If future annual taxable income were to be significantly less than current and projected levels, there is a risk that certain of our deferred tax assets not already provided for by the valuation allowance would expire prior to utilization.

The Company recognizes the financial statement benefit of a tax position only after determining that the relevant tax authority would more likely than not sustain the position following an audit. For tax positions meeting the more-likely-than-not threshold, the amount recognized in the financial statements is the largest benefit that has a greater than fifty percent likelihood of being realized upon ultimate settlement with the relevant tax authority. The Company recognizes the interest and penalties related to income tax matters in income tax expense.

Foreign Currency Translation

The financial statements of the Company's foreign subsidiaries are translated into U.S. dollars using the exchange rate at each balance sheet date for assets and liabilities and the average exchange rate for each applicable period for sales, costs and expenses. Foreign currency translation adjustments are included as a component of accumulated other comprehensive loss.

Stock-Based Compensation

The Company recognizes the cost of equity-based compensation awards based on the fair value estimated in accordance with ASC 718, Stock Based Compensation. The Company records equity compensation expense for awards with only a service vesting condition based on the fair value of such awards at the grant date and recognizes compensation expense on a straight-line basis over the requisite service period. Equity compensation expense for awards with performance vesting conditions is recorded based on the probable outcome of those performance conditions over the requisite service period.

Earnings per Share

Basic earnings per share is computed by dividing net income by the weighted average number of shares of the Company's common stock, ("Common Stock") outstanding during the respective period. The Company's diluted earnings per share gives effect to all potential shares of Common Stock outstanding during a period that do not have an anti-dilutive impact to the calculation. In computing the number of diluted shares outstanding, the treasury stock method is used in order to arrive at a net number of shares assumed issued upon the conversion of Common Stock equivalents.

34

NOTE 3. CREDIT FACILITIES

The Company has a $40 million secured revolving credit facility (the “Strattec Credit Facility”) with BMO Harris Bank N.A., while its joint venture has a $20 million secured revolving credit facility (the “ADAC-Strattec Credit Facility”) with BMO Harris Bank N.A., which is guaranteed by Strattec. Availability under the ADAC-Strattec Credit Facility is reduced to $18 million on August 1, 2025. The credit facilities both expire August 1, 2026and are secured by U.S. cash balances, accounts receivable, inventory, and fixed assets located in the U.S.

Interest on borrowings under the Strattec Credit Facility were at varying rates based, at our option, on the bank's prime rate or SOFR plus 1.35% prior to September 5, 2023 and SOFR plus 1.85% subsequent to September 5, 2023. Interest on borrowings under the ADAC-Strattec Credit Facility were at varying rates based, at our option, on the bank's prime rate with a 2% interest rate margin or SOFR plus 1.35% prior to May 30, 2024 and SOFR plus 3.10% subsequent to May 30, 2024. Both credit facilities contain a restrictive financial covenant that requires the applicable borrower to maintain a minimum net worth level. The ADAC-Strattec Credit Facility includes an additional restrictive financial covenant that requires the maintenance of a minimum fixed charge coverage ratio. As of June 29, 2025, we were in compliance with all financial covenants.

Outstanding borrowings under the credit facilities were as follows (in thousands):

StrattecCredit Facility ADAC-StrattecCredit Facility

Outstanding borrowings $ — $ — $ 8,000 $ 13,000

Average outstanding borrowings and the weighted average interest rate under each such credit facility were as follows (in thousands, except percentages):

StrattecCredit Facility ADAC-StrattecCredit Facility

Years Ended Years Ended

Weighted average interest rate — 8.5% 7.9 % 6.8%

NOTE 4. DERIVATIVE INSTRUMENTS

A portion of the Company's manufacturing costs are incurred in Mexican pesos, which causes earnings and cash flows to fluctuate with changes in the U.S. dollar/Mexican peso exchange rate. During both fiscal 2025 and 2024, the Company entered into contracts with a creditworthy counterparty that provide for monthly Mexican peso currency forward contracts for a portion of peso denominated operating costs. The following table quantifies the outstanding forward contracts as of June 29, 2025 (in thousands, except with respect to the average forward contractual exchange rate):

NOTE 5. LEASES

As of June 29, 2025, the Company has one operating lease for its El Paso, Texas finished goods and service parts distribution warehouse. Operating lease expense totaled $951,000 for the year ended June 29, 2025 and $989,000 for the year ended June 30, 2024. The operating lease asset and obligation related to our operating lease included in the accompanying consolidated balance sheets are presented below (in thousands):

35

Right-of-use asset:

Lease liability:

Other current liabilities $ 808 $ 744

Cash flow information related to the operating lease is shown below (in thousands):

Years Ended

Operating Cash Flows:

Cash paid related to operating lease obligation $ 941 $ 769

The weighted average remaining lease term and discount rate for our operating lease are shown below:

Weighted average remaining lease term, (in years) 3.5 4.5

Weighted average discount rate 6.2 % 6.2 %

Future minimum lease payments, by fiscal year, including options to extend that are reasonably certain to be exercised, under our non-cancelable lease are as follows as of June 29, 2025 (in thousands):

Thereafter —

Total future minimum lease payments 3,672

Less: imputed interest (386 )

Total lease obligations $ 3,286

NOTE 6. INCOME TAXES

Income tax expense is summarized as following (in thousands):

Years Ended

Current: