Item 1A. Risk Factors
RISK FACTORS
Investing in our common stock involves a high degree of risk. Before making your decision to invest in shares of our common stock, you should carefully consider the risks described below, together with the other information contained in this annual report, including our financial statements and the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that affect us. We cannot assure you that any of the events discussed below will not occur. These events could have a material and adverse impact on our business, financial condition, results of operations and prospects. If that were to happen, the trading price of our common stock could decline, and you could lose all or part of your investment.
Summary of Risk Factors
Our business is subject to a number of risks and uncertainties, including those highlighted in the section titled “Risk Factors” immediately following this summary. Some of these risks are:
Risks Related to Our Business
The outbreak of the novel strain of coronavirus,SARS-CoV-2, which causes COVID-19 is having an impact on our business.
Public health crises such as pandemics or similar outbreaks could adversely impact our business. In December 2019, a novel strain of coronavirus, SARS-CoV-2, which causes coronavirus disease 2019, or COVID-19, surfaced in Wuhan, China. Since then, COVID-19 has spread to multiple countries, including the United States, and has been declared by the World Health Organization to be a pandemic, impacting worldwide economic activity. A pandemic, including COVID-19, or other public health epidemic poses the risk that we or our employees, contractors, suppliers, and other partners may be prevented from conducting business activities in whole or in part for an indefinite period of time, including due to spread of the disease within these groups or due to shutdowns that may be requested or mandated by governmental authorities. In response to the spread of COVID-19, we have modified operations in our executive offices with our administrative employees primarily continuing their work outside of those offices, restricted on-site research, development and manufacturing staff to only those required to execute their job responsibilities on-site for prioritized activities, limited the number and proximity of staff in any given laboratory or in our manufacturing facility (except as necessary for particular activities), and implemented multiple work place safety, social distancing and disinfection protocols.
We are beginning to experience the impact of the COVID-19 outbreak on our business, including due to delays in the availability of materials routinely used in biologic therapeutic development and manufacturing, which may cause delays in our research, development and/or manufacturing activities,but overall patient enrollment and treatment remains on track. Most notably, certain consumables used in our development and manufacturing processes have been allocated, based on the Defense Priorities and Allocations System, or DPAS, rules currently in effect, first to production of COVID-19 therapeutic and prophylactic products and then next to production of approved products, with production of products under clinical investigation taking last priority. For example, we have not been able to procure certain filters used for GMP manufacture of our and our partners’ product candidates in the time frame we were expecting, placing the timeline for manufacture of such product candidates at risk. Further, routine materials such as disposable bags, filters, and chromatography resins have become limited in supply and placed the timeline for development of the process to manufacture another one of our partners’ projects at risk. We are attempting to mitigate these risks by ordering sufficient materials to provide a safety stock in reserve and by sourcing some of these materials from our partners’ safety stock. These impacts and any future impacts from the COVID-19 pandemic may adversely affect our research, development and/or manufacturing activities, which could negatively impact our business, financial condition and operations.
As a result of the COVID-19 outbreak, or similar pandemics, we may experience disruptions that could severely impact our business, clinical trials and preclinical studies, including:
These and other factors arising from the COVID-19 pandemic could worsen in countries that are already afflicted with COVID-19, could continue to spread to additional countries, or could return to countries where the pandemic has been partially contained, each of which could further adversely impact our ability to conduct clinical trials and our business generally, and could have a material adverse impact on our operations and financial condition and results.
In addition, the trading prices for our common stock and other biopharmaceutical companies, as well as the broader equity and debt markets, have been highly volatile as a result of the COVID-19 pandemic and the resulting impact on economic activity. As a result, we may face difficulties raising capital when needed, and any such sales may be on unfavorable terms to us. Further, to the extent we raise additional capital through the sale of equity or convertible debt securities, the ownership interest of existing stockholders will be diluted.
The COVID-19 outbreak continues to rapidly evolve. The extent to which the outbreak may impact our business, clinical trials, research activities, preclinical studies and manufacturing activities will depend on future developments, which are highly uncertain and cannot be predicted with confidence, such as the ultimate geographic spread of COVID-19, the duration of the outbreak, travel restrictions and actions to contain the outbreak or treat its impact, such as social distancing and quarantines or lock-downs in the United States and other countries, business closures or business disruptions and the effectiveness of actions taken in the United States and other countries to contain and treat the disease,including emergency use authorizations by the FDA for specified use of certain vaccines believed to be potentially beneficial against certain strains of COVID-19.
We are a clinical stage biopharmaceutical company with a limited operating history and no products approved for commercial sale. We have a history of significant losses, expect to continue to incur significant losses for the foreseeable future and may never achieve or maintain profitability, which could result in a decline in the market value of our common stock.
We are a clinical stage biopharmaceutical company with a limited operating history on which to base your investment decision. Biotechnology product development is a highly speculative undertaking and involves a substantial degree of risk.
To date, we have enrolled a limited number of patients in our initial clinical trials, have no products approved for commercial sale, have not generated any revenue from commercial product sales and, as of December 31, 2020, had an accumulated deficit of $227.9 million. For the years ended December 31, 2020 and December 31, 2019, our net loss was $32.1 million and $55.7 million, respectively. Substantially all of our losses have resulted from expenses incurred in connection with our research and development programs and from general and administrative costs associated with our operations. The net loss for the year ended December 31, 2020 included the benefit from the non-operating, unrealized gain of $41.5 million related to our holdings of Vaxcyte common stock. Our technologies and product candidates are in early stages of development, and we are subject to the risks of failure inherent in the development of product candidates based on novel technologies. In addition, we have limited experience as a clinical stage company and have not yet demonstrated an ability to successfully overcome many of the risks and uncertainties frequently encountered by companies in new and rapidly evolving fields, particularly in the biotechnology industry. Furthermore, we do not expect to generate any revenue from commercial product sales for the foreseeable future, and we expect to continue to incur significant operating losses for the foreseeable future due to the cost of research and development, preclinical studies and clinical trials and the regulatory approval process for our product candidates. We expect our net losses to increase substantially as we progress further into clinical development of our lead programs and create additional infrastructure to support operations as a public company. However, the amount of our future losses is uncertain. Our ability to achieve profitability, if ever, will depend on, among other things, our, or our existing or future collaborators’, successful development of product candidates, evaluating the related commercial opportunities, obtaining regulatory approvals to market and commercializing product candidates, manufacturing any approved products on commercially reasonable terms, establishing a sales and marketing organization or suitable third-party alternatives for any approved product and raising sufficient funds to finance business activities. If we, or our existing or future collaborators, are unable to develop our technologies and commercialize one or more of our product candidates or if sales revenue from any product candidate that receives approval is insufficient, we will not achieve profitability, which could have a material and adverse effect on our business, financial condition, results of operations and prospects. Even if we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods.
We will need substantial additional funds to advance development of our product candidates. This additional financing may not be available on acceptable terms, or at all. Failure to obtain this necessary capital when needed may force us to delay, limit or terminate our product development programs, commercialization efforts or other operations.
The development of biopharmaceutical product candidates is capital-intensive. If our product candidates enter and advance through preclinical studies and clinical trials, we will need substantial additional funds to expand our development, regulatory, manufacturing, marketing and sales capabilities. We have used substantial funds to develop our technology and product candidates and will require significant funds to conduct further research and development and preclinical testing and clinical trials of our product candidates, to seek regulatory approvals for our product candidates and to manufacture and market products, if any, which are approved for commercial sale. In addition, we expect to incur additional costs associated with operating as a public company.
Since our inception, we have invested a significant portion of our efforts and financial resources in research and development activities for our two proprietary clinical-stage product candidates STRO-001 and STRO-002, and the development of our in-house manufacturing capabilities. Clinical trials for our product candidates will require substantial funds to complete. As of December 31, 2020, we had $326.5 million in cash, cash equivalents and marketable securities. We expect to incur substantial expenditures in the foreseeable future as we seek to advance STRO-001 and STRO-002 and any future product candidates through clinical development, manufacturing, the regulatory approval process and, if approved, commercial launch activities, as well as in connection with the continued development of our manufacturing capabilities. Based on our current operating plan, we believe that our available cash, cash equivalents and marketable securities will be sufficient to fund our operations through at least the next 12 months. However, our future capital requirements and the period for which we expect our existing resources to support our operations may vary significantly from what we expect and we may need to seek additional funds sooner than planned. Our monthly spending levels vary based on new and ongoing research and development and other corporate activities. Because the length of time and activities associated with successful research and development of our product candidates is highly uncertain, we are
unable to estimate the actual funds we will require for development and any marketing and commercialization activities for approved products. The timing and amount of our operating expenditures will depend largely on:
• the timing and progress of preclinical and clinical development activities;
• the number and scope of preclinical and clinical programs we decide to pursue;
• the cost and timing of regulatory approvals;
If we are unable to obtain funding on a timely basis or on acceptable terms, we may have to delay, reduce or terminate our research and development programs and preclinical studies or clinical trials, limit strategic opportunities or undergo reductions in our workforce or other corporate restructuring activities. We also could be required to seek funds through arrangements with collaborators or others that may require us to relinquish rights to some of our technologies or product candidates that we would otherwise pursue on our own. We do not expect to realize revenue from sales of commercial products or royalties from licensed products in the foreseeable future, if at all, and, in no event, before our product candidates are clinically tested, approved for commercialization and successfully marketed. To date, we have primarily financed our operations through payments received under our collaboration agreements, the sale of equity securities and debt financing. We will be required to seek additional funding in the future and currently intend to do so through additional collaborations and/or licensing agreements, public or private equity offerings or debt financings, credit or loan facilities, or a combination of one or more of these funding sources. Our ability to raise additional funds will depend on financial, economic and other factors, many of which are beyond our control. Additional funds may not be available to us on acceptable terms or at all. Subject to limited exceptions, the Loan and Security Agreement we entered into with Oxford and SVB in February 2020, under which we borrowed $25.0 million, prohibits us from incurring indebtedness without the prior written consent of Oxford or SVB. If we raise additional funds by issuing equity securities, our stockholders will suffer dilution and the terms of any financing may adversely affect the rights of our stockholders. If we raise additional funds through licensing or collaboration arrangements with third parties, we may have to relinquish valuable rights to our product candidates, or grant licenses on terms that are not favorable to us. In addition, as a condition to providing additional funds to us, future investors may demand, and may be granted, rights superior to those of existing stockholders. Our current debt financing involves, and future debt financings, if available, are likely to involve, restrictive covenants limiting our flexibility in conducting future business activities, and, in the event of insolvency, debt holders would be repaid before holders of our equity securities receive any distribution of our corporate assets. Failure to obtain capital when needed on acceptable terms may force us to delay, limit or
terminate our product development and commercialization of our current or future product candidates, which could have a material and adverse effect on our business, financial condition, results of operations and prospects.
Our product candidates are in early stages of development and may fail in development or suffer delays that materially and adversely affect their commercial viability. If we or our collaborators are unable to complete development of or commercialize our product candidates or experience significant delays in doing so, our business will be materially harmed.
We have no products on the market and all of our product candidates for cancer therapy are in early stages of development. In particular, our product candidates, STRO-001 is in the dose escalation phase and STRO-002 is in the dose escalation and dose expansion phase of their respective Phase 1 clinical trials, and enrollment began in the second half of 2019 for patients in the Phase 1 clinical trial for CC-99712, a BCMA ADC candidate resulting from our BMS collaboration, and a Phase 1 clinical trial was initiated in the first quarter of 2021 for M1231, a MUC1-EGFR bispecific ADC resulting from our EMD Serono collaboration. Additionally, we have programs that are in earlier stages of discovery and preclinical development and may never advance to clinical-stage development. Our ability to achieve and sustain profitability depends on obtaining regulatory approvals for and successfully commercializing our product candidates, either alone or with third parties, and we cannot guarantee you that we will ever obtain regulatory approval for any of our product candidates. We have limited experience in conducting and managing the clinical trials necessary to obtain regulatory approvals, including approval by the FDA. Before obtaining regulatory approval for the commercial distribution of our product candidates, we or an existing or future collaborator must conduct extensive preclinical tests and clinical trials to demonstrate the safety and efficacy in humans of our product candidates.
We may not have the financial resources to continue development of, or to modify existing or enter into new collaborations for, a product candidate if we experience any issues that delay or prevent regulatory approval of, or our ability to commercialize, product candidates, including:
• delays in enrolling patients in our clinical trials;
• high drop-out rates of our clinical trial patients;
• greater than anticipated costs of our clinical trials;
We or our collaborators’ inability to complete development of or commercialize our product candidates or significant delays in doing so due to one or more of these factors, could have a material and adverse effect on our business, financial condition, results of operations and prospects.
Our business is dependent on the success of our product candidates based on our proprietary XpressCF® Platform and, in particular, our proprietary product candidates, STRO-001 and STRO-002. Existing and future preclinical studies and clinical trials of our product candidates may not be successful. If we are unable to commercialize our product candidates or experience significant delays in doing so, our business will be materially harmed.
We have invested a significant portion of our efforts and financial resources in the development of our proprietary XpressCF® Platform and our proprietary product candidates, STRO-001 and STRO-002. Our ability to generate commercial product revenues, which we do not expect will occur for many years, if ever, will depend heavily on the successful development and eventual commercialization of STRO-001 and STRO-002. We have not previously submitted a new drug application, or NDA, or a biologics license application, or BLA, to the FDA, or similar regulatory approval filings to comparable foreign authorities, for any product candidate, and we cannot be certain that our product candidates will be successful in clinical trials or receive regulatory approval. Further, our product candidates may not receive regulatory approval even if they are successful in clinical trials. If we do not receive regulatory approvals for our product candidates, we may not be able to continue our operations. Even if we successfully obtain regulatory approvals to market our product candidates, our revenues will be dependent, in part, upon the size of the markets in the territories for which we gain regulatory approval and have commercial rights. If the markets for patient subsets that we are targeting are not as significant as we estimate, we may not generate significant revenues from sales of such products, if approved.
We plan to seek regulatory approval to commercialize our product candidates both in the United States and in selected foreign countries. While the scope of regulatory approvals generally is similar in other countries, in order to obtain separate regulatory approvals in other countries, we must comply with numerous and varying regulatory requirements of such countries regarding safety and efficacy. Other countries also have their own regulations
governing, among other things, clinical trials and commercial sales, as well as pricing and distribution of our product candidates, and we may be required to expend significant resources to obtain regulatory approval and to comply with ongoing regulations in these jurisdictions.
The success of STRO-001 and STRO-002 and our other future product candidates will depend on many factors, including the following:
• enforcing and defending our intellectual property rights and claims;
• effectively competing with other therapies; and
If we do not achieve one or more of these factors in a timely manner or at all, we could experience significant delays or an inability to successfully commercialize our product candidates, which would materially harm our business, financial condition, results of operations and prospects.
Additionally, we have in the past and may in the future create benchmark molecules for comparative purposes. For example, we have created a benchmark folate receptor-alpha, or FolRα targeting antibody-drug conjugate, or ADC, using conventional technology that results in a heterogeneous ADC mixture. We have compared STRO-002 to this benchmark molecule in multiple preclinical models. We believe the results of these tests help us understand how the therapeutic index of STRO-002 compares to competitors’ product candidates. However, we cannot be certain that any benchmark molecule that we create is the same as the molecule we are attempting to recreate, and the results of the tests comparing any such benchmark molecule to any other potential or current product candidate may be different than the actual results of a head-to-head test of any such other potential or current product candidate against a competitor molecule. Additional preclinical and clinical testing will be needed to evaluate the therapeutic index of our potential or current product candidates, and to understand their therapeutic potential relative to other product candidates in development. While we believe our ADCs may be superior to other investigative agents in development, without head-to-head comparative data, we will not be able to make claims of superiority to other products in our promotional materials, if our product candidates are approved.
If we do not achieve our projected development goals in the time frames we announce and expect, the commercialization of our products may be delayed and our stock price may decline.
From time to time, we estimate the timing of the anticipated accomplishment of various scientific, clinical, regulatory and other product development goals, which we sometimes refer to as milestones. These milestones may include the commencement or completion of scientific studies and clinical trials and the submission of regulatory filings. From time to time, we may publicly announce the expected timing of some of these milestones. All of these milestones are and will be based on numerous assumptions. The actual timing of these milestones can vary dramatically compared to our estimates, in some cases for reasons beyond our control. If we do not
meet these milestones as publicly announced, or at all, the commercialization of our products may be delayed or never achieved and, as a result, our stock price may decline.
Our approach to the discovery and development of our therapeutic treatments is based on novel technologies that are unproven and may not result in marketable products.
We are developing a pipeline of product candidates using our proprietary XpressCF® Platform. We believe that product candidates identified with our product discovery platform may offer an improved therapeutic approach by taking advantage of precision design and rapid empirical optimization, thereby reducing the dose-limiting toxic effects associated with existing products. However, the scientific research that forms the basis of our efforts to develop product candidates based on our XpressCF® Platform is ongoing. Further, the scientific evidence to support the feasibility of developing therapeutic treatments based on our XpressCF® Platform is both preliminary and limited.
To date, we have tested our first clinical stage product candidates, STRO-001 and STRO-002, our partner BMS has tested CC-99712,and our partner EMD has tested M1231 in a limited number of clinical trial patients. We may ultimately discover that our XpressCF® Platform and any product candidates resulting therefrom do not possess certain properties required for therapeutic effectiveness. XpressCF® product candidates may also be unable to remain stable in the human body for the period of time required for the drug to reach the target tissue or they may trigger immune responses that inhibit the ability of the product candidate to reach the target tissue or that cause adverse side effects in humans. We currently have only limited data, and no conclusive evidence, to suggest that we can introduce these necessary properties into these product candidates derived from our XpressCF® Platform. We may spend substantial funds attempting to introduce these properties and may never succeed in doing so. In addition, product candidates based on our XpressCF® Platform may demonstrate different chemical and pharmacological properties in patients than they do in laboratory studies. Although our XpressCF® Platform and certain product candidates have produced successful results in animal studies, they may not demonstrate the same chemical and pharmacological properties in humans and may interact with human biological systems in unforeseen, ineffective or harmful ways. Further, in our oncology clinical trials to date, we have used achievement of stable disease as evidence for disease control (stable disease, partial response or complete response) by our product candidates; however, the FDA does not view stable disease as an objective response for the purposes of FDA approval.
We presented updated data from our STRO-001 Phase 1 trial in December 2020. As of October 30, 2020, most treatment emergent adverse events were grade 1 or 2, with the most common grade 1-2 treatment emergent adverse events of nausea, fatigue, chills, anemia, headache, dyspnea, abdominal pain, vomiting, decreased appetite and pyrexia, and no ocular or neuropathy toxicity signals have been observed. Two grade 3 and no grade 4 treatment emergent adverse events were observed, one instance each of anemia and dyspnea. Subsequent to a previously announced protocol amendment in 2019 requiring pre-treatment screening imaging for patients at risk for thromboses, no thromboembolic events have been observed.
We presented updated data from our STRO-002 Phase 1 trial in December 2020. Based on data from the trial through October 30, 2020, STRO-002 was generally well tolerated and was mostly associated with mild adverse events. Eighty-six percent (86%) of observed adverse events were grade 1 or grade 2 and prophylactic corticosteroid eyedrops have not been necessary. The most common Grade 3 and 4 treatment-emergent adverse events were reversible neutropenia. Grade 3 arthralgia (15.4%) and neuropathy (7.7%) were observed and managed with standard medical treatment, including dose reductions or delays without evidence of compromised efficacy.
If product candidates based on our XpressCF® Platform are unable to demonstrate sufficient safety and efficacy data to obtain marketing approval, we may never succeed in developing a marketable product, we may not become profitable and the value of our common stock will decline. The regulatory approval process for novel product candidates such as ours can be more expensive and take longer than for other, better known or extensively studied product candidates. We are not aware of any company currently developing a therapeutic using our approach to ADC development and no regulatory authority has granted approval for such a therapeutic. We believe the FDA has limited experience with therapeutics in oncology or other disease areas developed in cell-free-based synthesis systems, which may increase the complexity, uncertainty and length of the regulatory approval process for our product candidates. For example, our XpressCF® ADC product candidates contain cleavable or non-cleavable linker-warhead combinations or novel warheads that may result in unforeseen events when administered in a human. We and our existing or future collaborators may never receive approval to market and commercialize any product candidate. Even if we or an existing or future collaborator obtains regulatory approval, the approval may be for targets, disease indications or patient populations that are not as broad as we intended or desired or may require labeling that includes significant use or distribution restrictions or safety warnings. We or an existing or future collaborator may be required to perform additional or unanticipated clinical trials to obtain approval or be subject to post-marketing testing requirements to maintain regulatory approval. If
the products resulting from our XpressCF® Platform prove to be ineffective, unsafe or commercially unviable, our entire platform and pipeline would have little, if any, value, which would have a material and adverse effect on our business, financial condition, results of operations and prospects.
Results of preclinical studies and early clinical trials may not be predictive of results of future clinical trials.
The outcome of preclinical studies and early clinical trials may not be predictive of the success of later clinical trials, and interim results of clinical trials do not necessarily predict success in future clinical trials. Many companies in the pharmaceutical and biotechnology industries have suffered significant setbacks in late-stage clinical trials after achieving positive results in earlier development, and we could face similar setbacks. The design of a clinical trial can determine whether its results will support approval of a product, and flaws in the design of a clinical trial may not become apparent until the clinical trial is well advanced. While certain relevant members of our company have significant clinical experience, we in general have limited experience in designing clinical trials and may be unable to design and execute a clinical trial to support marketing approval. In addition, preclinical and clinical data are often susceptible to varying interpretations and analyses. Many companies that believed their product candidates performed satisfactorily in preclinical studies and clinical trials have nonetheless failed to obtain marketing approval for the product candidates. Even if we, or future collaborators, believe that the results of clinical trials for our product candidates warrant marketing approval, the FDA or comparable foreign regulatory authorities may disagree and may not grant marketing approval of our product candidates.
In some instances, there can be significant variability in safety or efficacy results between different clinical trials of the same product candidate due to numerous factors, including changes in trial procedures set forth in protocols, differences in the size and type of the patient populations, changes in and adherence to the dosing regimen and other clinical trial protocols and the rate of dropout among clinical trial patients. If we fail to receive positive results in clinical trials of our product candidates, the development timeline and regulatory approval and commercialization prospects for our most advanced product candidates, and, correspondingly, our business and financial prospects would be negatively impacted.
The market may not be receptive to our product candidates based on a novel therapeutic modality, and we may not generate any future revenue from the sale or licensing of product candidates.
Even if regulatory approval is obtained for a product candidate, we may not generate or sustain revenue from sales of the product due to factors such as whether the product can be sold at a competitive cost, competition in the therapeutic area(s) we have received or may receive approval for, and whether it will otherwise be accepted in the market. Historically, there have been concerns regarding the safety and efficacy of ADCs, and an ADC drug was voluntarily withdrawn from the market for an extended period of time. These historical concerns may negatively impact the perception market participants have on ADCs, including our product candidates. Additionally, the product candidates that we are developing are based on our proprietary XpressCF® Platform, which is a new technology. Market participants with significant influence over acceptance of new treatments, such as physicians and third-party payors, may not adopt an ADC product, or a product or treatment based on our novel cell-free production technologies, and we may not be able to convince the medical community and third-party payors to accept and use, or to provide favorable reimbursement for, any product candidates developed by us or our existing or future collaborators. Market acceptance of our product candidates will depend on, among other factors:
• the timing of our receipt of any marketing and commercialization approvals;
• the terms of any approvals and the countries in which approvals are obtained;
• the safety and efficacy of our product candidates;
• relative convenience and ease of administration of our product candidates;
• the willingness of patients to accept any new methods of administration;
• the success of our physician education programs;
Because our product candidates are based on new technology, we expect that they will require extensive research and development and have substantial manufacturing and processing costs. In addition, our estimates regarding potential market size for any indication may be materially different from what we discover to exist at the time we commence commercialization, if any, for a product, which could result in significant changes in our business plan and have a material adverse effect on our business, financial condition, results of operations and prospects. Moreover, if any product candidate we commercialize fails to achieve market acceptance, it could have a material and adverse effect on our business, financial condition, results of operations and prospects.
We have entered, and may in the future seek to enter, into collaborations with third parties for the development and commercialization of our product candidates using our XpressCF® Platform. If we fail to enter into such collaborations, or such collaborations are not successful, we may not be able to capitalize on the market potential of our XpressCF® Platform and resulting product candidates.
Since 2014, we have entered into collaborations with Merck Sharp & Dohme Corp., a subsidiary of Merck & Co., Inc., or Merck, Celgene Corporation, or Celgene, a wholly owned subsidiary of Bristol Myers Squibb Company, or BMS, and Merck KGaA, Darmstadt Germany (operating in the United States under the name “EMD Serono”, the biopharmaceutical business of Merck KGaA, Darmstadt, Germany in the US) to develop certain cancer and other therapeutics. In addition, we may in the future seek third-party collaborators for research, development and commercialization of other therapeutic technologies or product candidates. Biopharmaceutical companies are our prior and likely future collaborators for any marketing, distribution, development, licensing or broader collaboration arrangements. With respect to our existing collaboration agreements, and what we expect will be the case with any future collaboration agreements, we have and would expect to have limited control over the amount and timing of resources that our collaborators dedicate to the development or commercialization of our product candidates. Moreover, our ability to generate revenues from these arrangements will depend on our collaborators’ abilities to successfully perform the functions assigned to them in these arrangements.
Collaborations involving our product candidates currently pose, and will continue to pose, the following risks to us:
As a result of the foregoing, our current and any future collaboration agreements may not lead to development or commercialization of our product candidates in the most efficient manner or at all. Moreover, if a collaborator of ours were to be involved in a business combination, the continued pursuit and emphasis on our product development or commercialization program could be delayed, diminished or terminated. Any failure to successfully develop or commercialize our product candidates pursuant to our current or any future collaboration agreements could have a material and adverse effect on our business, financial condition, results of operations and prospects.
To date, no product developed on a cell-free manufacturing platform has received approval from the FDA, so the requirements for the manufacturing of products using our XpressCF® Platform are uncertain.
We have invested in our own current Good Manufacturing Practices, or cGMP, compliant manufacturing facility in San Carlos, California. In this facility, we are developing and implementing novel cell-free production technologies to supply our planned preclinical and clinical trials. However, before we may initiate a clinical trial or commercialize any of our product candidates, we must demonstrate to the FDA that the chemistry, manufacturing and controls for our product candidates meet applicable requirements, and in the European Union, or EU, a manufacturing authorization must be obtained from the appropriate EU regulatory authorities. The FDA has allowed Phase 1 clinical trial use of our product candidates STRO-001 and STRO-002 and our partner BMS’s CC-99712 product candidate, and our partner EMD Serono’s M1231 product candidate, portions of which are manufactured in our San Carlos manufacturing facility; however, because no product manufactured on a cell-free manufacturing platform has yet been approved in the United States, there is no manufacturing facility that has demonstrated the ability to comply with FDA requirements for later stage clinical development or commercialization, and, therefore, the time frame for demonstrating compliance to the FDA’s satisfaction is uncertain. Delays in establishing that our manufacturing process and facility comply with cGMPs or disruptions in our manufacturing processes, implementation of novel in-house technologies or scale-up activities, may delay or disrupt our development efforts.
We expect that development of our own manufacturing facility will provide us with enhanced control of material supply for preclinical studies, clinical trials and the commercial market, enable the more rapid implementation of process changes and allow for better long-term margins. However, we have limited experience as a company in establishing and operating a manufacturing facility and there exist only a small number of contract manufacturing organizations, or CMOs, with the experience necessary to manufacture our product candidates. We may have difficulty hiring experts for internal manufacturing or finding and maintaining relationships with external CMOs and, accordingly, our production capacity could be limited.
Our existing collaborations with Merck, BMS and EMD Serono are important to our business. If our collaborators cease development efforts under our existing or future collaboration agreements, or if any of those agreements are terminated, these collaborations may fail to lead to commercial products and we may never receive milestone payments or future royalties under these agreements.
We have entered into collaborations with other biotechnology companies to develop several of our product candidates, and such collaborations currently represent a significant portion of our product pipeline and discovery and preclinical programs. Substantially all of our revenue to date has been derived from our existing collaboration agreements with Merck, BMS and EMD Serono, and a significant portion of our future revenue and cash resources is expected to be derived from these agreements or other similar agreements into which we may enter in the future. Revenue from research and development collaborations depends upon continuation of the collaborations, payments for research and development and other services and product supply, and the achievement of milestones, contingent payments and royalties, if any, derived from future products developed from our research. If we are unable to successfully advance the development of our product candidates, achieve milestones or earn contingent payments under our collaboration agreements, future revenue and cash resources will be substantially less than expected.
We are unable to predict the success of our collaborations and we may not realize the anticipated benefits of our strategic collaborations. Our collaborators have discretion in determining and directing the efforts and resources, including the ability to discontinue all efforts and resources, they apply to the development and, if approval is obtained, commercialization and marketing of the product candidates covered by such collaborations. As a result, our collaborators may elect to de-prioritize our programs, change their strategic focus or pursue alternative technologies in a manner that results in reduced, delayed or no revenue to us. For example, Celgene, now BMS, was advancing four preclinical collaboration programs, one of which is CC-99712, an ADC targeting B-cell maturation antigen, or BCMA, for the treatment of multiple myeloma. BMS has worldwide development and commercialization rights with respect to this BCMA ADC, for which the FDA cleared the IND application and a Phase 1 clinical trial has commenced enrolling patients. In 2019, Celgene, now BMS, decided to not exercise the option to acquire U.S. clinical development and commercialization rights to a second collaboration program. Therefore, Celgene did not pay us the $12.5 million option maintenance fee due on IND clearance for the first collaboration program described above. Additionally, while BMS had ex-U.S. rights to three additional collaboration programs (BCMA-CD3, PD1-LAG3, and PD1-TIM3), since certain program milestones were not achieved by BMS by September 26, 2020, the ex-U.S. rights to those collaboration programs automatically reverted to us at no cost to us. Therefore, we now solely hold worldwide rights to the three programs. EMD Serono has advanced a collaboration program, M1231, a MUC1-EGFR bispecific ADC, into a Phase 1 clinical trial in the first quarter of 2021. EMD Serono has worldwide rights to M1231 and sole discretion in the clinical development and commercialization of this product. Our collaborators may have other marketed products and product candidates under collaboration with other companies, including some of our competitors, and their corporate objectives may not be consistent with our best interests. Our collaborators may also be unsuccessful in developing or commercializing our products. If our collaborations are unsuccessful, our business, financial condition, results of operations and prospects could be adversely affected. In addition, any dispute or litigation proceedings we may have with our collaborators in the future could delay development programs, create uncertainty as to ownership of intellectual property rights, distract management from other business activities and generate substantial expense.
Moreover, to the extent that any of our existing or future collaborators were to terminate a collaboration agreement, we may be forced to independently develop these product candidates, including funding preclinical studies or clinical trials, assuming marketing and distribution costs and defending intellectual property rights, or, in certain instances, abandon product candidates altogether, any of which could result in a change to our business plan and have a material adverse effect on our business, financial condition, results of operations and prospects.
We may not successfully engage in strategic transactions, including any additional collaborations we seek, which could adversely affect our ability to develop and commercialize product candidates, impact our cash position, increase our expenses and present significant distractions to our management.
From time to time, we may consider strategic transactions, such as additional collaborations, acquisitions of companies, asset purchases and out- or in-licensing of product candidates or technologies that we believe will complement or augment our existing business. In particular, we will evaluate and, if strategically attractive, seek to enter into additional collaborations, including with major biotechnology or biopharmaceutical companies. The competition for collaborators is intense, and the negotiation process is time-consuming and complex. Any new collaboration may be on terms that are not optimal for us, and we may not be able to maintain any new collaboration if, for example, development or approval of a product candidate is delayed, sales of an approved product candidate do not meet expectations, or the collaborator terminates the collaboration. In addition, there have been a significant
number of recent business combinations among large pharmaceutical companies that have resulted in a reduced number of potential future strategic partners. Our ability to reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the strategic partner’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed strategic partner’s evaluation of a number of factors. These factors may include the design or results of clinical trials, the likelihood of approval by the FDA or similar regulatory authorities outside the United States, the potential market for the subject product candidate, the costs and complexities of manufacturing and delivering such product candidate to patients, the potential of competing products, the existence of uncertainty with respect to our ownership of technology, which can exist if there is a challenge to such ownership, without regard to the merits of the challenge, and industry and market conditions generally. Moreover, if we acquire assets with promising markets or technologies, we may not be able to realize the benefit of acquiring such assets due to an inability to successfully integrate them with our existing technologies and may encounter numerous difficulties in developing, manufacturing and marketing any new products resulting from a strategic acquisition that delay or prevent us from realizing their expected benefits or enhancing our business.
We cannot assure you that following any such collaboration, or other strategic transaction, we will achieve the expected synergies to justify the transaction. For example, such transactions may require us to incur non-recurring or other charges, increase our near- and long-term expenditures and pose significant integration or implementation challenges or disrupt our management or business. These transactions would entail numerous operational and financial risks, including exposure to unknown liabilities, disruption of our business and diversion of our management’s time and attention in order to manage a collaboration or develop acquired products, product candidates or technologies, incurrence of substantial debt or dilutive issuances of equity securities to pay transaction consideration or costs, higher than expected collaboration, acquisition or integration costs, write-downs of assets or goodwill or impairment charges, increased amortization expenses, difficulty and cost in facilitating the collaboration or combining the operations and personnel of any acquired business, impairment of relationships with key suppliers, manufacturers or customers of any acquired business due to changes in management and ownership and the inability to retain key employees of any acquired business. Also, such strategic alliance, joint venture or acquisition may be prohibited. For example, our Loan and Security Agreement, in the absence of the related lenders’ prior written consent, restricts our ability to pursue certain mergers, acquisitions, amalgamations or consolidations that we may believe to be in our best interest.
Accordingly, although there can be no assurance that we will undertake or successfully complete any transactions of the nature described above, any transactions that we do complete may be subject to the foregoing or other risks and would have a material and adverse effect on our business, financial condition, results of operations and prospects. Conversely, any failure to enter any additional collaboration or other strategic transaction that would be beneficial to us could delay the development and potential commercialization of our product candidates and have a negative impact on the competitiveness of any product candidate that reaches market.
We expect to rely on third parties to conduct certain of our preclinical studies or clinical trials. If those third parties do not perform as contractually required, fail to satisfy regulatory or legal requirements or miss expected deadlines, our development program could be delayed with potentially material and adverse effects on our business, financial condition, results of operations and prospects.
We have relied in some cases and intend to rely in the future on third-party clinical investigators, clinical research organizations, or CROs, clinical data management organizations and consultants to assist or provide the design, conduct, supervision and monitoring of preclinical studies and clinical trials of our product candidates. Because we intend to rely on these third parties and will not have the ability to conduct all preclinical studies or clinical trials independently, we will have less control over the timing, quality and other aspects of preclinical studies and clinical trials than we would have had we conducted them on our own. These investigators, CROs and consultants will not be our employees and we will have limited control over the amount of time and resources that they dedicate to our programs. These third parties may have contractual relationships with other entities, some of which may be our competitors, which may draw time and resources from our programs. The third parties with which we may contract might not be diligent, careful or timely in conducting our preclinical studies or clinical trials, resulting in the preclinical studies or clinical trials being delayed or unsuccessful.
If we cannot contract with acceptable third parties on commercially reasonable terms, or at all, or if these third parties do not carry out their contractual duties, satisfy legal and regulatory requirements for the conduct of preclinical studies or clinical trials or meet expected deadlines, our clinical development programs could be delayed and otherwise adversely affected. In all events, we will be responsible for ensuring that each of our preclinical studies and clinical trials are conducted in accordance with the general investigational plan and protocols for the trial. The FDA requires preclinical studies to be conducted in accordance with good laboratory practices and clinical trials to be conducted in accordance with good clinical practices, including for designing, conducting, recording and reporting the results of preclinical studies and clinical trials to assure that data and reported results are credible and accurate and that the rights, integrity and confidentiality of clinical trial participants are protected. Our reliance on third parties that we do not control will not relieve us of these responsibilities and requirements. Any adverse development or delay in our preclinical studies or clinical trials as a result of our reliance on third parties could have a material and adverse effect on our business, financial condition, results of operations and prospects.
If we are unable to obtain sufficient raw and intermediate materials on a timely basis or if we experience other manufacturing or supply difficulties, our business may be adversely affected.
The manufacture of certain of our product candidates requires the timely delivery of sufficient amounts of raw and intermediate materials. We work closely with our suppliers to ensure the continuity of supply, but cannot guarantee these efforts will always be successful. Further, while efforts are made to diversify our sources of raw and intermediate materials, in certain instances we acquire raw and intermediate materials from a sole supplier. While we believe that alternative sources of supply exist where we rely on sole supplier relationships, there can be no assurance that we will be able to quickly establish additional or replacement sources for some materials. A reduction or interruption in supply, and an inability to develop alternative sources for such supply, could adversely affect our ability to manufacture our product candidates in a timely or cost-effective manner.
We currently manufacture a portion of our product candidates internally and also rely on third-party manufacturing and supply partners to supply components of our product candidates. Our inability to manufacture sufficient quantities of our product candidates, or the loss of our third-party suppliers, or our or their failure to comply with applicable regulatory requirements or to supply sufficient quantities at acceptable quality levels or prices, or at all, would materially and adversely affect our business.
Manufacturing is a vital component of our business strategy. To ensure timely and consistent product supply we currently use a hybrid product supply approach wherein certain elements of our product candidates are manufactured internally at our manufacturing facilities in San Carlos, California, and other elements are manufactured at qualified third-party CMOs. Since our own manufacturing facilities may be limited or unable to manufacture certain of our preclinical and clinical trial product materials and supplies, we rely on third-party contract manufacturers to manufacture such clinical trial product materials and supplies for our or our collaborator’s needs. There can be no assurance that our preclinical and clinical development product supplies will not be limited, interrupted, or of satisfactory quality or continue to be available at acceptable prices. In particular, any replacement of our manufacturer could require significant effort and expertise because there may be a limited number of qualified replacements. In addition, replacement of a manufacturer may require a technology transfer to the new manufacturer, which involves technical risk that the transfer may not succeed or may be delayed, and which can incur significant costs.
The manufacturing process for a product candidate is subject to FDA and foreign regulatory authority review. We, and our suppliers and manufacturers, must meet applicable manufacturing requirements and undergo rigorous facility and process validation tests required by regulatory authorities in order to comply with regulatory standards, such as cGMPs. If we or our contract manufacturers cannot successfully manufacture material that conforms to our specifications and the strict regulatory requirements of the FDA or comparable foreign regulatory authorities, we may not be able to rely on our or their manufacturing facilities for the manufacture of elements of our product candidates. Moreover, we do not control the manufacturing process at our contract manufacturers and are completely dependent on them for compliance with current regulatory requirements. In the event that any of our manufacturers fails to comply with such requirements or to perform its obligations in relation to quality, timing or otherwise, or if our supply of components or other materials becomes limited or interrupted for other reasons, we may be forced to manufacture the materials ourselves or enter into an agreement with another third party, which we may not be able to do on reasonable terms, if at all. In some cases, the technical skills or technology required to manufacture our product candidates may be unique or proprietary to the original manufacturer and we may have difficulty applying such skills or technology ourselves, or in transferring such to another third party. These factors would increase our reliance on such manufacturer or require us to obtain a license from such manufacturer in order to enable us, or to have another third party, manufacture our product
candidates. If we are required to change manufacturers for any reason, we will be required to verify that the new manufacturer maintains facilities and procedures that comply with quality standards and with all applicable regulations and guidelines; and we may be required to repeat some of the development program. The delays associated with the verification of a new manufacturer could negatively affect our ability to develop product candidates in a timely manner or within budget.
We expect to continue to rely on third-party manufacturers if we receive regulatory approval for any product candidate. To the extent that we have existing, or enter into future, manufacturing arrangements with third parties, we will depend on these third parties to perform their obligations in a timely manner consistent with contractual and regulatory requirements, including those related to quality control and assurance. If we are unable to obtain or maintain third-party manufacturing for product candidates, or to do so on commercially reasonable terms, we may not be able to develop and commercialize our product candidates successfully. Our or a third party’s failure to execute on our manufacturing requirements and comply with cGMPs could adversely affect our business in a number of ways, including:
• loss of the cooperation of an existing or future collaborator;
Additionally, we and our contract manufacturers may experience manufacturing difficulties due to resource constraints or as a result of labor disputes, unstable political environments, or epidemics, pandemics, or contagious diseases, such as the COVID-19 outbreak. If we or our contract manufacturers were to encounter any of these difficulties, our ability to provide our product candidates to patients in clinical trials, or to provide product for treatment of patients once approved, would be jeopardized.
We, or third-party manufacturers, may be unable to successfully scale-up manufacturing of our product candidates in sufficient quality and quantity, which would delay or prevent us from developing our product candidates and commercializing approved products, if any.
In order to conduct clinical trials of our product candidates, we will need to manufacture them in large quantities. We, or any manufacturing partners, may be unable to successfully increase the manufacturing capacity for any of our product candidates in a timely or cost-effective manner, or at all. In addition, quality issues may arise during scale-up activities. If we, or any manufacturing partners, are unable to successfully scale up the manufacture of our product candidates in sufficient quality and quantity, the development, testing, and clinical trials of that product candidate may be delayed or infeasible, and regulatory approval or commercial launch of any resulting product may be delayed or not obtained, which could significantly harm our business.
The manufacture of biologics is complex and we or our third-party manufacturers may encounter difficulties in production. If we or any of our third-party manufacturers encounter such difficulties, our ability to provide supply of our product candidates for clinical trials, our ability to obtain marketing approval, or our ability to provide supply of our products for patients, if approved, could be delayed or stopped.
Our product candidates are considered to be biologics and the process of manufacturing biologics is complex, time-consuming, highly regulated and subject to multiple risks. We and our contract manufacturers must comply with cGMPs, regulations and guidelines for the manufacturing of biologics used in clinical trials and, if approved, marketed products. To date, we and our contract manufacturers have limited experience in the manufacturing of cGMP batches of our product candidates.
Manufacturing biologics is highly susceptible to product loss due to contamination, equipment failure, improper installation or operation of equipment, vendor or operator error, inconsistency in yields, variability in product characteristics and difficulties in scaling the production process. Even minor deviations from normal manufacturing processes could result in reduced production yields, product defects and other supply disruptions. If microbial, viral or other contaminations are discovered at our manufacturing facilities or those of our third-party manufacturers, such facilities may need to be closed for an extended period of time to investigate and remedy the contamination, which could delay clinical trials and adversely harm our business. Moreover, if the FDA determines that our manufacturing facilities or those of our third-party manufacturers are not in compliance with FDA laws and regulations, including those governing cGMPs, the FDA may deny BLA approval until the deficiencies are corrected or we replace the manufacturer in our BLA with a manufacturer that is in compliance.
In addition, there are risks associated with large scale manufacturing for clinical trials or commercial scale including, among others, cost overruns, potential problems with process scale-up, process reproducibility, stability issues, compliance with cGMPs, lot consistency, timely availability of raw materials and other technical challenges. Even if we or our collaborators obtain regulatory approval for any of our product candidates, there is no assurance that manufacturers will be able to manufacture the approved product to specifications acceptable to the FDA or other regulatory authorities, to produce it in sufficient quantities to meet the requirements for the potential launch of the product or to meet potential future demand. If our manufacturers are unable to produce sufficient quantities for clinical trials or for commercialization, commercialization efforts would be impaired, which would have an adverse effect on our business, financial condition, results of operations and prospects.
Scaling up a biologic manufacturing process is a difficult and uncertain task, and we may not be successful in transferring our production system or our third-party manufacturers may not have the necessary capabilities to complete the implementation and development process. If we are unable to adequately validate or scale-up the manufacturing process at our own manufacturing facilities or those of our current manufacturers, we will need to transfer to another manufacturer and complete the manufacturing validation process, which can be lengthy. If we are able to adequately validate and scale-up the manufacturing process for our product candidates at our manufacturing facility or with a contract manufacturer, we will still need to negotiate with such contract manufacturer an agreement for commercial supply and it is not certain we will be able to come to agreement on terms acceptable to us.
We cannot assure you that any stability or other issues relating to the manufacture of any of our product candidates or products will not occur in the future. If we or our third-party manufacturers were to encounter any of these difficulties, our ability to provide any product candidates to patients in planned clinical trials and products to patients, once approved, would be jeopardized. Any delay or interruption in the supply of clinical trial supplies could delay the completion of planned clinical trials, increase the costs associated with maintaining clinical trial programs and, depending upon the period of delay, require us to commence new clinical trials at additional expense or terminate clinical trials completely. Any adverse developments affecting clinical or commercial manufacturing of our product candidates or products, such as epidemics, pandemics or contagious diseases, may result in shipment delays, inventory shortages, lot failures, product withdrawals or recalls, or other interruptions in the supply of our product candidates or products. We may also have to take inventory write-offs and incur other charges and expenses for product candidates or products that fail to meet specifications, undertake costly remediation efforts or seek more costly manufacturing alternatives. Accordingly, failures or difficulties faced at any level of our supply chain could adversely affect our business and delay or impede the development and commercialization of any of our product candidates or products, if approved, and could have an adverse effect on our business, prospects, financial condition and results of operations.
As part of our process development efforts, we also may make changes to our manufacturing processes at various points during development, for various reasons, such as controlling costs, achieving scale, decreasing processing time, increasing manufacturing success rate or other reasons. Such changes carry the risk that they will not achieve their intended objectives, and any of these changes could cause our product candidates to perform differently and affect the results of our ongoing clinical trials or future clinical trials. In some circumstances, changes in the manufacturing process may require us to perform ex vivo comparability studies and to collect additional data from patients prior to undertaking more advanced clinical trials. For instance, changes in our process during the course of clinical development may require us to show the comparability of the product used in earlier clinical phases or at earlier portions of a trial to the product used in later clinical phases or later portions of the trial.
We may not be successful in our efforts to use our XpressCF® Platform to expand our pipeline of product candidates and develop marketable products.
The success of our business depends in large part upon our ability to identify, develop and commercialize products based on our XpressCF® Platform. STRO-001 and STRO-002 are our most advanced clinical stage programs and our preclinical and research programs may fail to identify other potential product candidates for clinical development for a number of reasons. Our research methodology may be unsuccessful in identifying potential product candidates or our potential product candidates may be shown to have harmful side effects or may have other characteristics that may make the products unmarketable or unlikely to receive marketing approval. If any of these events occur, we may be forced to abandon our development efforts for a program or for multiple programs, which would materially harm our business and could potentially cause us to cease operations. Research programs to identify new product candidates require substantial technical, financial and human resources. We may focus our efforts and resources on potential programs or product candidates that ultimately prove to be unsuccessful.
We may expend our limited resources to pursue a particular product candidate and fail to capitalize on product candidates that may be more profitable or for which there is a greater likelihood of success.
Because we have limited financial and managerial resources, we focus our research and development efforts on certain selected product candidates. As a result, we may forgo or delay pursuit of opportunities with other product candidates that later prove to have greater commercial potential. Our resource allocation decisions may cause us to fail to capitalize on viable commercial products or profitable market opportunities. Our spending on current and future research and development programs and product candidates for specific indications may not yield any commercially viable product candidates. If we do not accurately evaluate the commercial potential or target market for a particular product candidate, we may relinquish valuable rights to that product candidate through collaboration, licensing or other royalty arrangements in cases in which it would have been more advantageous for us to retain sole development and commercialization rights to such product candidate.
Failure to successfully validate, develop and obtain regulatory approval for companion diagnostics for our product candidates could harm our drug development strategy and operational results.
If companion diagnostics are developed in conjunction with clinical programs, the FDA may require regulatory approval of a companion diagnostic as a condition to approval of the product candidate. For example, if we use a diagnostic test to determine which patients are most likely to benefit from STRO-001 for the treatment of multiple myeloma and non-Hodgkin lymphoma by designing our pivotal trial or trials of STRO-001 in that indication to require that clinical trial patients have elevated CD74 expression as a criterion for enrollment, then we will likely be required to obtain FDA approval or clearance of a companion diagnostic, concurrent with approval of STRO-001, to test for elevated CD74 expression; we may also be required to demonstrate to the FDA the predictive utility of the companion diagnostic—namely, that the diagnostic selects for patients in whom the biologic therapy will be effective or more effective compared to patients not selected for by the diagnostic. Similarly, as we are developing STRO-002 for a potential indication in patients with elevated FolRα expression levels, we may be required to obtain FDA approval or clearance of a companion diagnostic, concurrent with approval of STRO-002, to test for elevated FolRα expression. We do not have experience or capabilities in developing or commercializing diagnostics and plan to rely in large part on third parties to perform these functions. We recently entered into an agreement to develop diagnostic assays suitable for use as a companion diagnostic for STRO-002. Companion diagnostics are subject to regulation by the FDA and foreign regulatory authorities as medical devices and require separate regulatory approval or clearance prior to commercialization. In addition, our partner BMS may be required to develop and obtain regulatory clearance for a companion diagnostic to assess BCMA expression in patients in connection with their development of CC-99712. Similarly, our partner EMD Serono may be required to develop and obtain regulatory clearance for companion diagnostics to assess MUC1 and EGFR expression in patients in connection with their development of M1231.
If we or our collaborators, or any third party, are unable to successfully develop companion diagnostics for our product candidates, or experience delays in doing so:
In addition, although we believe genetic testing is becoming more prevalent in the diagnosis and treatment of various diseases and conditions, our product candidates may be perceived negatively compared to alternative treatments that do not require the use of companion diagnostics, either due to the additional cost of the companion diagnostic or the need to complete additional procedures to identify genetic markers prior to administering our product candidates. If any of these events were to occur, our business would be harmed, possibly materially.
We face competition from entities that have developed or may develop product candidates for cancer, including companies developing novel treatments and technology platforms. If these companies develop technologies or product candidates more rapidly than we do or their technologies are more effective, our ability to develop and successfully commercialize product candidates may be adversely affected.
The development and commercialization of drugs and therapeutic biologics is highly competitive. Our product candidates, if approved, will face significant competition and our failure to effectively compete may prevent us from achieving significant market penetration. Most of our competitors have significantly greater resources than we do and we may not be able to successfully compete. We compete with a variety of multinational biopharmaceutical companies, specialized biotechnology companies and emerging biotechnology companies, as well as with technologies and product candidates being developed at universities and other research institutions. Our competitors have developed, are developing or will develop product candidates and processes competitive with our product candidates and processes. Competitive therapeutic treatments include those that have already been approved and accepted by the medical community and any new treatments, including those based on novel technology platforms, that enter the market. We believe that a significant number of products are currently under development, and may become commercially available in the future, for the treatment of conditions for which we are trying, or may try, to develop product candidates. There is intense and rapidly evolving competition in the biotechnology, biopharmaceutical and antibody and immunoregulatory therapeutics fields. While we believe that our XpressCF® Platform, associated intellectual property and our scientific and technical know-how give us a competitive advantage in this space, competition from many sources exists or may arise in the future. Our competitors include larger and better funded biopharmaceutical, biotechnological and therapeutics companies, including companies focused on cancer immunotherapies, such as AstraZeneca PLC, BMS, GlaxoSmithKline PLC, Merck, Novartis AG, Pfizer Inc., or Pfizer, Roche Holding Ltd, Sanofi S.A and companies focused on ADCs, such as Pfizer, GlaxoSmithKline PLC, Daiichi Sankyo Company, Limited, ImmunoGen, Inc., Seagen, Inc., Genentech, Inc., or Genentech, Immunomedics, Inc., Mersana Therapeutics, Inc., and ADC Therapeutics SA, as well as numerous small companies. Moreover, we also compete with current and future therapeutics developed at universities and other research institutions.
We are aware of several companies that are developing ADCs, cytokine derivatives, bispecific antibodies and cancer immunotherapies. Many of these companies are well-capitalized and, in contrast to us, have significant clinical experience, and may include our existing or future collaborators. In addition, these companies compete with us in recruiting scientific and managerial talent.
Our success will depend partially on our ability to develop and protect therapeutics that are safer and more effective than competing products. Our commercial opportunity and success will be reduced or eliminated if competing products are safer, more effective, or less expensive than the therapeutics we develop.
If our most advanced product candidates are approved, they will compete with a range of therapeutic treatments that are either in development or currently marketed. Currently marketed oncology drugs and therapeutics range from monoclonal antibodies such as Genentech’s Herceptin; ADCs, such as Genentech’s Kadcyla; to immune checkpoint inhibitors such as BMS’s Opdivo;to T cell-engager immunotherapies such as Amgen, Inc.’s Blincyto; and to CAR-T cell therapies such as Gilead’s Yescarta. In addition, numerous compounds are in clinical development for cancer treatment. With respect to B cell-based malignancies, such as multiple myeloma, the most common treatments are chemotherapeutic compounds, radiation therapy, stem cell transplantation, corticosteroids, immunomodulating agents, and targeted therapy. The clinical development pipeline for cancer includes small molecules, antibodies, vaccines, cell therapies and immunotherapies from a variety of companies and institutions.
Many of our competitors,either alone or with strategic partners,have significantly greater financial, technical, manufacturing, marketing, sales, supply, and human resources or experience than we have. If we successfully obtain approval for any product candidate, we will face competition based on many different factors, including the safety and effectiveness of our products, the ease with which our products can be administered and the extent to which patients accept relatively new routes of administration, the timing and scope of regulatory approvals for these products, the availability and cost of manufacturing, marketing and sales capabilities, price, reimbursement coverage and patent position. Competing products could present superior treatment alternatives, including by being more effective, safer, less expensive, or marketed and sold more effectively than any products we may develop. Competitive products may make any products we develop obsolete or noncompetitive before we recover the expense of developing and commercializing our product candidates. Such competitors could also recruit our employees, which could negatively impact our level of expertise and our ability to execute our business plan.
Any inability to attract and retain qualified key management and technical personnel would impair our ability to implement our business plan.
Our success largely depends on the continued service of key management, advisors and other specialized personnel, including William J. Newell, our chief executive officer, Edward Albini, our chief financial officer, Trevor J. Hallam, Ph.D., our chief scientific officer, Arturo Molina, M.D., our chief medical officer and Shabbir T. Anik, Ph.D., our chief technical operations officer. The loss of one or more members of our management team or other key employees or advisors could delay our research and development programs and have a material and adverse effect on our business, financial condition, results of operations and prospects. The relationships that our key managers have cultivated within our industry make us particularly dependent upon their continued employment with us. We are dependent on the continued service of our technical personnel because of the highly technical nature of our product candidates and XpressCF® Platform technologies and the specialized nature of the regulatory approval process. Because our management team and key employees are not obligated to provide us with continued service, they could terminate their employment with us at any time without penalty. Our future success will depend in large part on our continued ability to attract and retain other highly qualified scientific, technical and management personnel, as well as personnel with expertise in clinical testing, manufacturing, governmental regulation and commercialization. We face competition for personnel from other companies, universities, public and private research institutions, government entities and other organizations. If we are unable to continue to attract and retain high-quality personnel, the rate and success at which we can discover and develop product candidates will be limited, which could have a material and adverse effect on our business, financial condition, results of operations and prospects.
We will need to grow our organization, and we may experience difficulties in managing our growth and expanding our operations.
As of December 31, 2020, we had 191 full-time employees. As our development and commercialization plans and strategies develop, we expect to expand our employee base for managerial, operational, financial and other resources. In addition, we have limited experience in product development and began our first clinical trials for our first two product candidates in 2018 and 2019. As our product candidates enter and advance through preclinical studies and clinical trials, we will need to expand our development, regulatory and manufacturing capabilities or contract with other organizations to provide these capabilities for us. In the future, we expect to have to manage additional relationships with collaborators or partners, suppliers and other organizations. Our ability to manage our operations and future growth will require us to continue to improve our operational, financial and management controls, reporting systems and procedures. We may not be able to implement improvements to our management information and control systems in an efficient or timely manner and may discover deficiencies in existing systems and controls. Our inability to successfully manage our growth and expand our operations could have a material and adverse effect on our business, financial condition, results of operations and prospects.
If any of our product candidates are approved for marketing and commercialization and we are unable to develop sales, marketing and distribution capabilities on our own or enter into agreements with third parties to perform these functions on acceptable terms, we will be unable to commercialize successfully any such future products.
We currently have no sales, marketing or distribution capabilities or experience. If any of our product candidates are approved, we will need to develop internal sales, marketing and distribution capabilities to commercialize such products, which would be expensive and time consuming, or enter into collaborations with third parties to perform these services. If we decide to market our products directly, we will need to commit
significant financial and managerial resources to develop a marketing and sales force with technical expertise and supporting distribution, administration and compliance capabilities. If we rely on third parties with such capabilities to market our products or decide to co-promote products with collaborators, we will need to establish and maintain marketing and distribution arrangements with third parties, and there can be no assurance that we will be able to enter into such arrangements on acceptable terms or at all. In entering into third-party marketing or distribution arrangements, any revenue we receive will depend upon the efforts of the third parties and there can be no assurance that such third parties will establish adequate sales and distribution capabilities or be successful in gaining market acceptance of any approved product. If we are not successful in commercializing any product approved in the future, either on our own or through third parties, our business, financial condition, results of operations and prospects could be materially and adversely affected.
Our future growth may depend, in part, on our ability to operate in foreign markets, where we would be subject to additional regulatory burdens and other risks and uncertainties.
Our future growth may depend, in part, on our ability to develop and commercialize our product candidates in foreign markets, for which we may rely on collaboration with third parties. We are not permitted to market or promote any of our product candidates before we receive regulatory approval from the applicable regulatory authority in that foreign market, and may never receive such regulatory approval for any of our product candidates. To obtain separate regulatory approval in many other countries, we must comply with numerous and varying regulatory requirements of such countries regarding safety and efficacy and governing, among other things, clinical trials and commercial sales, pricing and distribution of our product candidates, and we cannot predict success in these jurisdictions. If we fail to comply with the regulatory requirements in international markets and do not receive applicable marketing approvals, our target market will be reduced and our ability to realize the full market potential of our product candidates will be harmed and our business will be adversely affected. We may not obtain foreign regulatory approvals on a timely basis, if at all. Our failure to obtain approval of any of our product candidates by regulatory authorities in another country may significantly diminish the commercial prospects of that product candidate and our business, financial condition, results of operations and prospects could be materially and adversely affected. Moreover, even if we obtain approval of our product candidates and ultimately commercialize our product candidates in foreign markets, we would be subject to the risks and uncertainties, including the burden of complying with complex and changing foreign regulatory, tax, accounting and legal requirements and reduced protection of intellectual property rights in some foreign countries.
Price controls imposed in foreign markets may adversely affect our future profitability.
In some countries, particularly member states of the EU, the pricing of prescription drugs is subject to governmental control. In these countries, pricing negotiations with governmental authorities can take considerable time after receipt of marketing approval for a product. In addition, there can be considerable pressure by governments and other stakeholders on prices and reimbursement levels, including as part of cost containment measures. Political, economic and regulatory developments may further complicate pricing negotiations, and pricing negotiations may continue after reimbursement has been obtained. Reference pricing used by various EU member states and parallel distribution, or arbitrage between low-priced and high-priced member states, can further reduce prices. In some countries, we or current or future collaborators may be required to conduct a clinical trial or other studies that compare the cost-effectiveness of our therapeutic candidates to other available therapies in order to obtain or maintain reimbursement or pricing approval. Publication of discounts by third-party payors or authorities may lead to further pressure on the prices or reimbursement levels within the country of publication and other countries. If reimbursement of any product candidate approved for marketing is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, our business, financial condition, results of operations and prospects could be materially and adversely affected.
Price controls imposed in the U.S. may affect our future profitability.
Recently there has been heightened governmental scrutiny over the manner in which manufacturers set prices for their marketed products, which has resulted in recent Executive Orders, several Congressional inquiries and proposed and enacted federal and state legislation designed to, among other things, bring more transparency to product pricing, review the relationship between pricing and manufacturer patient programs, and reform government program reimbursement methodologies for drug products. Current and future presidential budget proposals and future legislation may contain further drug price control measures that could be enacted. Congress and current and future U.S. presidential administrations may continue to seek new legislative and/or
administrative measures to control drug costs. At the state level, legislatures are increasingly passing legislation and implementing regulations designed to control pharmaceutical and biological product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing. If such pricing controls are enacted and are set at unsatisfactory levels, our business, financial condition, results of operations and prospects could be materially and adversely affected.
Our business entails a significant risk of product liability and our ability to obtain sufficient insurance coverage could have a material and adverse effect on our business, financial condition, results of operations and prospects.
As we are conducting clinical trials of our product candidates, we may be exposed to significant product liability risks inherent in the development, testing, manufacturing and marketing of therapeutic treatments. Product liability claims could delay or prevent completion of our development programs. If we succeed in marketing products, such claims could result in an FDA investigation of the safety and effectiveness of our products, our manufacturing processes and facilities or our marketing programs and potentially a recall of our products or more serious enforcement action, limitations on the approved indications for which they may be used or suspension or withdrawal of approvals. Regardless of the merits or eventual outcome, liability claims may also result in decreased demand for our products, injury to our reputation, costs to defend the related litigation, a diversion of management’s time and our resources, substantial monetary awards to trial participants or patients and a decline in our stock price. While we currently have product liability insurance that we believe is appropriate for our stage of development, we may need to obtain higher levels prior to later stages of clinical development or marketing any of our product candidates. Any insurance we have or may obtain may not provide sufficient coverage against potential liabilities. Furthermore, clinical trial and product liability insurance is becoming increasingly expensive. As a result, we may be unable to obtain sufficient insurance at a reasonable cost to protect us against losses caused by product liability claims that could have a material and adverse effect on our business, financial condition, results of operations and prospects.
Our employees may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.
As with all companies, we are exposed to the risk of employee fraud or other misconduct. Misconduct by employees could include intentional failures to comply with FDA regulations, provide accurate information to the FDA, comply with manufacturing standards we may establish, comply with federal and state healthcare fraud and abuse laws and regulations, inappropriately share confidential and proprietary information externally, report financial information or data accurately or disclose unauthorized activities to us. In particular, sales, marketing and business arrangements in the healthcare industry are subject to extensive laws and regulations intended to prevent fraud, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs and other business arrangements. Employee misconduct could also involve the improper use of information obtained in the course of clinical trials, which could result in regulatory sanctions and serious harm to our reputation. It is not always possible to identify and deter employee misconduct, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a material and adverse effect on our business, financial condition, results of operations and prospects, including the imposition of significant civil, criminal and administrative penalties, damages, fines, disgorgement, imprisonment, the curtailment or restructuring of our operations, loss of eligibility to obtain approvals from the FDA, exclusion from participation in government contracting, healthcare reimbursement or other government programs, including Medicare and Medicaid, integrity oversight and reporting obligations, or reputational harm.
Moreover, our employees are increasingly utilizing social media tools and our website as a means of communication. Despite our efforts to monitor social media communications, there is risk that the unauthorized use of social media by our employees to communicate about our products or business, or any inadvertent disclosure of material, nonpublic information through these means, may result in violations of applicable laws and regulations, which may give rise to liability and result in harm to our business. In addition, there is also risk of inappropriate disclosure of sensitive information, which could result in significant legal and financial exposure and reputational damages that could potentially have a material adverse impact on our business, financial condition and results of operations.
We depend on our information technology systems, and any failure of these systems, or those of our CROs, third-party vendors, or other contractors or consultants we may utilize, could harm our business. Security breaches, cyber-attacks, loss of data, and other disruptions could compromise sensitive information related to our business or other personal information or prevent us from accessing critical information and expose us to liability, which could adversely affect our business, reputation, results of operations, financial condition and prospects.
We collect and maintain information in digital form that is necessary to conduct our business, and we are increasingly dependent on information technology systems and infrastructure to operate our business. In the ordinary course of our business, we collect, store and transmit large amounts of confidential information, including intellectual property, proprietary business information health information, and personal information. It is critical that we do so in a secure manner to maintain the confidentiality and integrity of such confidential information. We have established physical, electronic and organizational measures to safeguard and secure our systems to prevent a data compromise, and rely on commercially available systems, software, tools, and monitoring to provide security for our information technology systems and the processing, transmission and storage of digital information. We have also outsourced elements of our information technology infrastructure, and as a result a number of third-party vendors may or could have access to our confidential information. Our internal information technology systems and infrastructure, and those of our current and any future collaborators, CROs, third-party vendors, contractors and consultants and other third parties on which we rely, are vulnerable to damage from computer viruses, malware, natural disasters, terrorism, war, telecommunication and electrical failures, cyber-attacks or cyber-intrusions over the Internet, attachments to emails, persons inside our organization, or persons with access to systems inside our organization.
The risk of a security breach or disruption or data loss, particularly through cyber-attacks or cyber intrusion, including by computer hackers, foreign governments and cyber terrorists, has generally increased as the number, intensity and sophistication of attempted attacks and intrusions from around the world have increased. In addition, the prevalent use of mobile devices that access confidential information increases the risk of data security breaches, which could lead to the loss of confidential information or other intellectual property. The costs to us orour CROs or other contractors or consultants we may utilize to mitigate network security problems, bugs, viruses, worms, phishing attempts, malicious software programs and security vulnerabilities could be significant, and while we have implemented security measures to protect our data security and information technology systems, our efforts to address these problems may not be successful, and these problems could result in unexpected interruptions, delays, cessation of service and other harm to our business and our competitive position. We have incurred successful phishing attempts in the past, and although believe that these attempts were detected and neutralized prior to any significant impact to our business and we have implemented additional measures to prevent such attacks, we may still be subject to similar attacks in the future. We are also aware of publicly disclosed security breaches at certain third-parties on which we rely, although we have not been informed of any resulting breach to our data. If such an event were to occur, whether to us or a third-party on which we rely, and cause interruptions in our operations, it could result in a material disruption of our product development programs. For example, the loss of clinical trial data from completed or ongoing or planned clinical trials could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the data. Moreover, if a computer security breach affects our systems or results in the unauthorized release of personally identifiable information, our reputation could be materially damaged. In addition, such a breach may require notification to governmental agencies, the media or individuals pursuant to various federal and state privacy and security laws, if applicable, including the Health Insurance Portability and Accountability Act of 1996, or HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, or HITECH, and its implementing rules and regulations, as well as regulations promulgated by the Federal Trade Commission and state breach notification laws. We would also be exposed to a risk of loss or litigation and potential liability under laws, regulations and contracts that protect the privacy and security of personal information. For example, the California Consumer Privacy Act of 2018, or the CCPA, imposes a private right of action for security breaches that could lead to some form of remedy including regulatory scrutiny, fines, private right of action settlements, and other consequences. We would also be exposed to a risk of loss or litigation and potential liability, which could materially adversely affect our business, reputation, results of operations, financial condition and prospects.
Our information technology systems could face serious disruptions that could adversely affect our business.
Our information technology and other internal infrastructure systems, including corporate firewalls, servers, leased lines and connection to the Internet, face the risk of systemic failure that could disrupt our operations. A significant disruption in the availability of our information technology and other internal infrastructure systems could cause interruptions and delays in our research and development and manufacturing work.
The terms of our Loan and Security Agreement require us to meet certain covenants and place restrictions on our operating and financial flexibility. If we raise additional capital through debt financing, the terms of any new debt could further restrict our ability to operate our business.
The Loan and Security Agreement is secured by a lien covering all of our assets, excluding our intellectual property. Subject to the terms of the Loan and Security Agreement, we have the option to prepay all, but not less than all, of the amounts borrowed under the Loan and Security Agreement, subject to certain penalty payments, prior to the March 1, 2024 maturity date, at which time all amounts borrowed will be due and payable.
The Loan and Security Agreement we entered into in February 2020 with Oxford and SVB contains customary affirmative and negative covenants, indemnification provisions and events of default. The affirmative covenants include, among others, covenants requiring us to maintain our legal existence and governmental approvals, deliver certain financial reports and maintain certain intellectual property rights. The negative covenants include, among others, restrictions on transferring or licensing our assets, changing our business, incurring additional indebtedness, engaging in mergers or acquisitions, paying dividends or making other distributions, and creating other liens on our assets, in each case subject to customary exceptions. If we default under the Loan and Security Agreement, the lenders will be able to declare all obligations immediately due and payable and take control of our collateral, potentially requiring us to renegotiate our agreement on terms less favorable to us or to immediately cease operations. Further, if we are liquidated, the rights of Oxford and SVB to repayment would be senior to the rights of the holders of our common stock to receive any proceeds from the liquidation. Oxford, acting as collateral agent for the lenders, could declare a default under the Loan and Security Agreement upon the occurrence of any event that Oxford and SVB interpret as a material adverse change as defined under the Loan and Security Agreement, thereby requiring us to repay the loan immediately or to attempt to reverse the declaration of default through negotiation or litigation. Any declaration by the collateral agent of an event of default could significantly harm our business, financial condition, results of operations and prospects and could cause the price of our common stock to decline. If we raise any additional debt financing, the terms of such additional debt could further restrict our operating and financial flexibility.
If we do not comply with laws regulating the protection of the environment and health and human safety, our business could be affected adversely.
Our research, development and manufacturing involve the use of hazardous chemicals and materials, including radioactive materials. We maintain quantities of various flammable and toxic chemicals in our facilities in South San Francisco and San Carlos, California that are required for our research, development and manufacturing activities. We are subject to federal, state and local laws and regulations governing the use, manufacture, storage, handling and disposal of these hazardous chemicals and materials. We believe our procedures for storing, handling and disposing these materials in our South San Francisco and San Carlos facilities comply with the relevant guidelines of the two municipalities, the county of San Mateo, the state of California and the Occupational Safety and Health Administration of the U.S. Department of Labor. Although we believe that our safety procedures for handling and disposing of these materials comply with the standards mandated by applicable regulations, the risk of accidental contamination or injury from these materials cannot be eliminated. If an accident occurs, we could be held liable for resulting damages, which could be substantial. We are also subject to numerous environmental, health and workplace safety laws and regulations, including those governing laboratory procedures, exposure to blood-borne pathogens and the handling of animals and biohazardous materials. Although we maintain workers’ compensation insurance to cover us for costs and expenses we may incur due to injuries to our employees resulting from the use of these materials, this insurance may not provide adequate coverage against potential liabilities. While we maintain pollution legal liability insurance for our manufacturing facility in San Carlos, California, we do not maintain insurance for environmental liability or toxic tort claims that may be asserted against us in connection with our storage or disposal of biological or hazardous materials in our other locations. Additional federal, state and local laws and regulations affecting our
operations may be adopted in the future. We may incur substantial costs to comply with, and substantial fines or penalties if we violate, any of these laws or regulations.
Our current operations are in two cities in the San Francisco Bay Area, and we, or the third parties upon whom we depend, may be adversely affected by earthquakes or other natural disasters and our business continuity and disaster recovery plans may not adequately protect us from a serious disaster.
Our current operations are located in our facilities in South San Francisco and San Carlos, California. Any unplanned event, such as earthquake, flood, fire, explosion, extreme weather condition, epidemic, pandemic or contagious disease, power shortage, telecommunication failure or other natural or man-made accidents or incidents that result in us being unable to fully utilize our facilities, or the manufacturing facilities of our third-party contract manufacturers, may have a material and adverse effect on our ability to operate our business, particularly on a daily basis, and have significant negative consequences on our financial and operating conditions. Loss of access to these facilities may result in increased costs, delays in the development of our product candidates or interruption of our business operations. Earthquakes, epidemics, pandemics or contagious diseases, or other natural disasters could further disrupt our operations, and have a material and adverse effect on our business, financial condition, results of operations and prospects. If a natural disaster, power outage, epidemics, pandemics or contagious disease, or other events occurred that prevented us from using all or a significant portion of our headquarters, that damaged critical infrastructure, such as our research or manufacturing facilities or the manufacturing facilities of our third-party contract manufacturers, or that otherwise disrupted operations, it may be difficult or, in certain cases, impossible, for us to continue our business for a substantial period of time. The disaster recovery and business continuity plans we have in place may prove inadequate in the event of a serious disaster or similar event. We may incur substantial expenses as a result of the limited nature of our disaster recovery and business continuity plans, which could have a material adverse effect on our business. As part of our risk management policy, we maintain insurance coverage at levels that we believe are appropriate for our business. However, in the event of an accident or incident at these facilities, we cannot assure you that the amounts of insurance will be sufficient to satisfy any damages and losses. If our facilities, or the manufacturing facilities of our third-party contract manufacturers, are unable to operate because of an accident or incident or for any other reason, even for a short period of time, any or all of our research and development programs may be harmed. Any business interruption could have a material and adverse effect on our business, financial condition, results of operations and prospects.
Changes in tax laws or regulations that are applied adversely to us or our customers may have a material adverse effect on our business, cash flows, financial condition or results of operations.
New income, sales, use or other tax laws, statutes, rules, regulations or ordinances could be enacted at any time, which could adversely affect our business and financial condition. Further, existing tax laws, statutes, rules, regulations or ordinances could be interpreted, changed, modified or applied adversely to us. For example, legislation enacted in 2017, informally titled the Tax Cuts and Jobs Act, or the 2017 Tax Act, enacted many significant changes to the U.S. tax laws. Future guidance from the Internal Revenue Service and other tax authorities with respect to the 2017 Tax Act may affect us, and certain aspects of the 2017 Tax Act may be repealed or modified in future legislation. For example, the Coronavirus Aid, Relief, and Economic Security Act, or the CARES Act, modified certain provisions of the 2017 Tax Act. In addition, it is uncertain if and to what extent various states will conform to the 2017 Tax Act or any newly enacted federal tax legislation. Changes in corporate tax rates, the realization of net deferred tax assets relating to our operations, the taxation of foreign earnings, and the deductibility of expenses under the 2017 Tax Act or future reform legislation could have a material impact on the value of our deferred tax assets, could result in significant one-time charges, and could increase our future U.S. tax expense.
Our ability to use net operating loss carryforwards to offset taxable income could be limited.
We plan to use our current year operating losses to offset taxable income from any revenue generated from operations, including revenue from corporate collaborations. To the extent that our taxable income exceeds any current year operating losses, we plan to use our net operating loss carryforwards to offset income that would otherwise be taxable. Our net operating loss carryforwards generated in tax years ending on or prior to December 31, 2017, are only permitted to be carried forward for 20 years under applicable U.S. tax law. Under the 2017 Tax Act, as modified by the CARES Act, our federal net operating losses generated in tax years beginning after December 31, 2017, may be carried forward indefinitely, but the deductibility of such federal net operating losses generated in tax years beginning after December 31, 2020, is limited to 80% of taxable income. Net operating losses generated in taxable years beginning after December 31, 2017 and beginning on or prior to December 31, 2020 may be carried back up to five years. Net operating losses arising in taxable years beginning after December 31,
2020 may not be carried back under current law. It is uncertain if and to what extent various states will conform to the 2017 Tax Act or the CARES Act.
In addition, under Section 382 of the U.S. Internal Revenue Code of 1986, as amended, and corresponding provisions of state law, if we experience an “ownership change” which is generally defined as a greater than 50% change, by value, in its equity ownership over a three-year period, our ability to use our pre-change net operating loss carryforwards to offset our post-change income may be limited. Based on Section 382 studies performed for certain prior periods, it is more likely than not that we experienced an ownership change on November 20, 2019, and may have experienced other ownership changes in the past, and may experience ownership changes in the future as a result of equity offerings or other shifts in our stock ownership, some of which are outside our control. As a result, our use of federal NOL carryforwards could be limited. State net operating loss carryforwards may be similarly limited. In addition, at the state level, there may be periods during which the use of net operating losses is suspended or otherwise limited, which could accelerate or permanently increase state taxes owed. Any such limitations may result in greater tax liabilities than we would incur in the absence of such limitations and any increased liabilities could adversely affect our business, results of operations, financial position and cash flows.
Our investment in Vaxcyte is subject to risk
As of December 31, 2020, we held Vaxcyte common stock with a fair value of $41.6 million. Vaxcyte common stock is publicly traded and therefore subject to the various risk factors associated with any publicly traded company, including risks associated with Vaxcyte’s business, its business outlook, cash flow requirements and financial performance, the state of the market and the general economic climate, including the impact of the COVID-19 pandemic. Vaxcyte common stock has been subject to substantial volatility, and the change in fair value of our interests in Vaxcyte will materially impact our reported net income or net loss in our financial statements.
Our financial results may be adversely affected by changes in accounting principles generally accepted in the United States.
Generally accepted accounting principles in the United States, or U.S. GAAP, are subject to interpretation by the Financial Accounting Standards Board, or the FASB, the American Institute of Certified Public Accountants, the SEC and various bodies formed to promulgate and interpret appropriate accounting principles. For example, in May 2014, the FASB issued accounting standards update No. 2014-09 (Topic 606), Revenue from Contracts with Customers, which supersedes nearly all existing revenue recognition guidance under U.S. GAAP. We adopted this new accounting standard as of January 1, 2019. Any difficulties in implementing this guidance could cause us to fail to meet our financial reporting obligations, which could result in regulatory discipline and harm investors’ confidence in us. Additionally, the implementation of this guidance or a change in other principles or interpretations could have a significant effect on our financial results, and could affect the reporting of transactions completed before the announcement of a change. Furthermore, we have adopted Topic 606 through the modified retrospective method. This will impact the comparability of our financial results, which might lead investors to draw incorrect conclusions that could harm investor interest in holding or purchasing our equity.
Risks Related to Intellectual Property
If we are not able to obtain and enforce patent protection for our technologies or product candidates, development and commercialization of our product candidates may be adversely affected.
Our success depends in part on our ability to obtain and maintain patents and other forms of intellectual property rights, including in-licenses of intellectual property rights of others, for our product candidates, methods used to manufacture our product candidates and methods for treating patients using our product candidates, as well as our ability to preserve our trade secrets, to prevent third parties from infringing upon our proprietary rights and to operate without infringing upon the proprietary rights of others. We may not be able to apply for patents on certain aspects of our product candidates in a timely fashion or at all. Further, we may not be able to prosecute all necessary or desirable patent applications, or maintain, enforce and license any patents that may issue from such patent applications, at a reasonable cost or in a timely manner. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection. We may not have the right to control the preparation, filing and prosecution of all patent applications that we license from third parties, or to maintain the rights to patents licensed to third parties. Therefore, these patents and applications may not be prosecuted and enforced in a manner consistent with the best interests of our business.
Our existing issued and granted patents and any future patents we obtain may not be sufficiently broad to prevent others from using our technology or from developing competing products and technology. There is no guarantee that any of our pending patent applications will result in issued or granted patents, that any of our issued or granted patents will not later be found to be invalid or unenforceable or that any issued or granted patents will include claims that are sufficiently broad to cover our product candidates or to provide meaningful protection from our competitors. Moreover, the patent position of biotechnology and biopharmaceutical companies can be highly uncertain because it involves complex legal and factual questions. We will be able to protect our proprietary rights from unauthorized use by third parties only to the extent that our current and future proprietary technology and product candidates are covered by valid and enforceable patents or are effectively maintained as trade secrets. If third parties disclose or misappropriate our proprietary rights, it may materially and adversely affect our position in the market.
The U.S. Patent and Trademark Office, or USPTO, and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other provisions during the patent process. There are situations in which noncompliance can result in abandonment or lapse of a patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, competitors might be able to enter the market earlier than would otherwise have been the case. The standards applied by the USPTO and foreign patent offices in granting patents are not always applied uniformly or predictably. For example, there is no uniform worldwide policy regarding patentable subject matter or the scope of claims allowable in biotechnology and biopharmaceutical patents. As such, we do not know the degree of future protection that we will have on our proprietary products and technology. While we will endeavor to try to protect our product candidates with intellectual property rights such as patents, as appropriate, the process of obtaining patents is time consuming, expensive and sometimes unpredictable.
Once granted, patents may remain open to opposition, interference, re-examination, post-grant review, inter partes review, nullification or derivation action in court or before patent offices or similar proceedings for a given period after allowance or grant, during which time third parties can raise objections against such initial grant. In the course of such proceedings, which may continue for a protracted period of time, the patent owner may be compelled to limit the scope of the allowed or granted claims thus attacked, or may lose the allowed or granted claims altogether. In addition, there can be no assurance that:
• we may develop additional proprietary technologies that are patentable;
If we or our licensors or collaborators fail to maintain the patents and patent applications covering our product candidates, our competitors might be able to enter the market, which could have a material and adverse effect on our business, financial condition, results of operations and prospects.
If we are unable to protect the confidentiality of our trade secrets, our business and competitive position would be harmed.
In addition to seeking patent protection for certain aspects of our product candidates, we also consider trade secrets, including confidential and unpatented know-how important to the maintenance of our competitive position. We protect trade secrets and confidential and unpatented know-how, in part, by entering into non-disclosure and confidentiality agreements with parties who have access to such knowledge, such as our employees, corporate collaborators, outside scientific collaborators, CROs, contract manufacturers, consultants, advisors and other third parties. We also enter into confidentiality and invention or patent assignment agreements with our employees and consultants that obligate them to maintain confidentiality and assign their inventions to us. Despite these efforts, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret is difficult, expensive and time- consuming, and the outcome is unpredictable. In addition, some courts in the United States and certain foreign jurisdictions are less willing or unwilling to protect trade secrets. If any of our trade secrets were to be lawfully obtained or independently developed by a competitor, we would have no right to prevent them from using that technology or information to compete with us. If any of our trade secrets were to be disclosed to or independently developed by a competitor, our competitive position would be harmed which could have a material and adverse effect on our business, financial condition, results of operations and prospects.
Other companies or organizations may challenge our or our licensors’ patent rights or may assert patent rights that prevent us from developing and commercializing our products.
Therapeutics in oncology or other disease areas developed in cell-free-based synthesis systems are a relatively new scientific field. We have obtained grants and issuances of, and have obtained a license from a third party on an exclusive basis to, patents related to our proprietary XpressCF® Platform. The issued patents and pending patent applications in the United States and in key markets around the world that we own or license claim many different methods, compositions and processes relating to the discovery, development, manufacture and commercialization of antibody-based and other therapeutics.
As the field of antibody-based therapeutics continues to mature, patent applications are being processed by national patent offices around the world. There is uncertainty about which patents will issue and, if they do, as to when, to whom, and with what claims. In addition, third parties may attempt to invalidate our intellectual property rights. Even if our rights are not directly challenged, disputes could lead to the weakening of our intellectual property rights. Our defense against any attempt by third parties to circumvent or invalidate our intellectual property rights could be costly to us, could require significant time and attention of our management and could have a material and adverse effect on our business, financial condition, results of operations and prospects or our ability to successfully compete.
We may not be able to protect our intellectual property rights throughout the world.
Obtaining a valid and enforceable issued or granted patent covering our technology in the United States and worldwide can be extremely costly, and our or our licensors’ or collaborators’ intellectual property rights may not exist in some countries outside the United States or may be less extensive in some countries than in the United States. In jurisdictions where we or our licensors or collaborators have not obtained patent protection, competitors may seek to use our or their technology to develop their own products and further, may export otherwise infringing products to territories where we or they have patent protection, but where it is more difficult to enforce a patent as compared to the United States. Competitor products may compete with our future products in jurisdictions where we do not have issued or granted patents or where our or our licensors’ or collaborators’ issued or granted patent claims or other intellectual property rights are not sufficient to prevent competitor activities in these jurisdictions. The legal systems of certain countries, particularly certain developing countries, make it difficult to enforce patents and such countries may not recognize other types of intellectual property protection, particularly relating to biopharmaceuticals. This could make it difficult for us or our licensors or collaborators to prevent the infringement of our or their patents or marketing of competing products in violation of our or their proprietary rights generally in certain jurisdictions. Proceedings to enforce our patent rights in foreign jurisdictions could result in substantial cost and divert our and our licensors’ or collaborators’ efforts and attention from other aspects of our business, could put our and our licensors’ or collaborators’ patents at risk of being invalidated or interpreted narrowly and our and our licensors’ or collaborators’ patent applications at risk of not issuing and could provoke third parties to assert claims against us or our licensors or collaborators. We or our licensors or collaborators may not prevail in any
lawsuits that we or our licensors or collaborators initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful.
We generally file a provisional patent application first (a priority filing) at the USPTO. An international application under the Patent Cooperation Treaty, PCT, is usually filed within twelve months after the priority filing. Based on the PCT filing, national and regional patent applications may be filed in the United States, EU, Japan, Australia and Canada and, depending on the individual case, also in any or all of, inter alia, Brazil, China, Hong Kong, India, Israel, Mexico, New Zealand, Russia, South Africa, South Korea and other jurisdictions. We have so far not filed for patent protection in all national and regional jurisdictions where such protection may be available. In addition, we may decide to abandon national and regional patent applications before grant. Finally, the grant proceeding of each national or regional patent is an independent proceeding which may lead to situations in which applications might in some jurisdictions be refused by the relevant registration authorities, while granted by others. It is also quite common that depending on the country, various scopes of patent protection may be granted on the same product candidate or technology.
The laws of some jurisdictions do not protect intellectual property rights to the same extent as the laws in the United States, and many companies have encountered significant difficulties in protecting and defending such rights in such jurisdictions. If we or our licensors or collaborators encounter difficulties in protecting, or are otherwise precluded from effectively protecting, the intellectual property rights important for our business in such jurisdictions, the value of these rights may be diminished and we may face additional competition from others in those jurisdictions. Many countries have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, many countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of such patent. If we or any of our licensors or collaborators are forced to grant a license to third parties with respect to any patents relevant to our business, our competitive position in the relevant jurisdiction may be impaired and our business, financial condition, results of operations and prospects may be adversely affected.
We, our licensors or collaborators, or any future strategic partners may need to resort to litigation to protect or enforce our patents or other proprietary rights, all of which could be costly, time consuming, delay or prevent the development and commercialization of our product candidates, or put our patents and other proprietary rights at risk.
Competitors may infringe our patents or other intellectual property. If we were to initiate legal proceedings against a third party to enforce a patent covering one of our products or our technology, the defendant could counterclaim that our patent is invalid or unenforceable. In patent litigation in the United States, defendant counterclaims alleging invalidity or unenforceability are commonplace. Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, for example, lack of novelty, obviousness or non-enablement. Grounds for an unenforceability assertion could be an allegation that an individual connected with prosecution of the patent withheld relevant information from the USPTO, or made a misleading statement, during prosecution. The outcome following legal assertions of invalidity and unenforceability during patent litigation is unpredictable. With respect to the validity question, for example, we cannot be certain that there is no invalidating prior art, of which we and the patent examiner were unaware during prosecution. If a defendant were to prevail on a legal assertion of invalidity or unenforceability, we would lose at least part, and perhaps all, of the patent protection on one or more of our products or certain aspects of our platform technology. Such a loss of patent protection could have a material and adverse effect on our business, financial condition, results of operations and prospects. Interference or derivation proceedings provoked by third parties or brought by us or declared by the USPTO may be necessary to determine the priority of inventions with respect to our patents or patent applications. An unfavorable outcome could require us to cease using the related technology or to attempt to license rights to it from the prevailing party. Our business could be harmed if the prevailing party does not offer us a license on commercially reasonable terms or at all, or if a non-exclusive license is offered and our competitors gain access to the same technology. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. There could also be public announcements of the results of hearings, motions, or other interim proceedings or developments. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of our common stock. Patents and other intellectual property rights also will not protect our technology if competitors design around our protected technology without legally infringing our patents or other intellectual property rights.
Intellectual property rights of third parties could adversely affect our ability to commercialize our product candidates, and we, our licensors or collaborators, or any future strategic partners may become subject to third party claims or litigation alleging infringement of patents or other proprietary rights or seeking to invalidate patents or other proprietary rights. We might be required to litigate or obtain licenses from third parties in order to develop or market our product candidates. Such litigation or licenses could be costly or not available on commercially reasonable terms.
We, our licensors or collaborators, or any future strategic partners may be subject to third-party claims for infringement or misappropriation of patent or other proprietary rights. There is a substantial amount of litigation, both within and outside the United States, involving patent and other intellectual property rights in the biotechnology and pharmaceutical industries, including patent infringement lawsuits, interferences, oppositions and inter partes review proceedings before the USPTO, and corresponding foreign patent offices. There are many issued and pending patents that might claim aspects of our product candidates and modifications that we may need to apply to our product candidates. There are also many issued patents that claim antibodies, portions of antibodies, cytokines, half-life extending polymers, linkers, cytotoxins, or other warheads that may be relevant for the products we wish to develop. Thus, it is possible that one or more organizations will hold patent rights to which we will need a license. If those organizations refuse to grant us a license to such patent rights on reasonable terms, we may not be able to market products or perform research and development or other activities covered by these patents which could have a material and adverse effect on our business, financial condition, results of operations and prospects. We are obligated under certain of our license and collaboration agreements to indemnify and hold harmless our licensors or collaborators for damages arising from intellectual property infringement by use. For example, we are obligated under the Stanford Agreement to indemnify and hold harmless Stanford for damages arising from intellectual property infringement by us resulting from exercise of the license from Stanford. If we, our licensors or collaborators, or any future strategic partners are found to infringe a third-party patent or other intellectual property rights, we could be required to pay damages, potentially including treble damages, if we are found to have infringed willfully. In addition, we, our licensors or collaborators, or any future strategic partners may choose to seek, or be required to seek, a license from a third party, which may not be available on acceptable terms, if at all. Even if a license can be obtained on acceptable terms, the rights may be non-exclusive, which could give our competitors access to the same technology or intellectual property rights licensed to us. If we fail to obtain a required license, we or our existing or future collaborators may be unable to effectively market product candidates based on our technology, which could limit our ability to generate revenue or achieve profitability and possibly prevent us from generating revenue sufficient to sustain our operations. In addition, we may find it necessary to pursue claims or initiate lawsuits to protect or enforce our patent or other intellectual property rights. The cost to us in defending or initiating any litigation or other proceeding relating to patent or other proprietary rights, even if resolved in our favor, could be substantial, and litigation could divert our management’s attention. Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could delay our research and development efforts and limit our ability to continue our operations.
Because the antibody-based therapeutics landscape is still evolving, it is difficult to conclusively assess our freedom to operate without infringing on third-party rights. There are numerous companies that have pending patent applications and issued patents broadly covering antibodies generally, covering antibodies directed against the same targets as, or targets similar to, those we are pursuing, or covering linkers and cytotoxic warheads similar to those that we are using in our product candidates. For example, we are aware of an issued patent, expected to expire in 2023, which has claims relating to methods of treating CD74-positive multiple myeloma with an ADC targeting CD74. If valid and not yet expired when, and if, we receive marketing approval for STRO-001, we may need to seek a license to this patent, which may not be available on commercially reasonable terms or at all. As another example, we are aware of another issued patent, expected to expire in 2031, that relates to strained alkyne reagents that can be used as synthetic precursors for certain of our linker-warheads. Failure to receive a license could delay commercialization of STRO-001. Our competitive position may suffer if patents issued to third parties or other third-party intellectual property rights cover our products or product candidates or elements thereof, or our manufacture or uses relevant to our development plans. In such cases, we may not be in a position to develop or commercialize products or product candidates until such patents expire or unless we successfully pursue litigation to nullify or invalidate the third-party intellectual property right concerned, or enter into a license agreement with the intellectual property right holder, if available on commercially reasonable terms. There may be issued patents of which we are not aware, held by third parties that, if found to be valid and enforceable, could be alleged to be infringed by our XpressCF® Platform and related technologies and product candidates. There also may be pending patent applications of which we are not aware that may result in issued patents, which could be alleged to be infringed by our XpressCF® Platform and related technologies and product candidates. If such an infringement claim should be brought and be successful, we may be required to pay substantial damages, including potentially treble damages and attorneys’ fees for willful infringement, and we may
be forced to abandon our product candidates or seek a license from any patent holders. No assurances can be given that a license will be available on commercially reasonable terms, if at all.
It is also possible that we have failed to identify relevant third-party patents or applications. For example, U.S. applications filed before November 29, 2000 and certain U.S. applications filed after that date that will not be filed outside the United States remain confidential until patents issue. Patent applications in the United States and elsewhere are published approximately 18 months after the earliest filing for which priority is claimed, with such earliest filing date being commonly referred to as the priority date. Therefore, patent applications covering our products or platform technology could have been filed by others without our knowledge. Additionally, pending patent applications that have been published can, subject to certain limitations, be later amended in a manner that could cover our platform technology, our products or the use of our products. Third-party intellectual property right holders may also actively bring infringement claims against us. We cannot guarantee that we will be able to successfully settle or otherwise resolve such infringement claims. If we are unable to successfully settle future claims on terms acceptable to us, we may be required to engage in or continue costly, unpredictable and time-consuming litigation and may be prevented from or experience substantial delays in marketing our products. Parties making claims against us may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation or administrative proceedings, there is a risk that some of our confidential information could be compromised by disclosure. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have material adverse effect on our ability to raise additional funds or otherwise have a material adverse effect on our business, results of operations, financial condition and prospects. If we fail in any such dispute, in addition to being forced to pay damages, we may be temporarily or permanently prohibited from commercializing any of our product candidates that are held to be infringing. We might, if possible, also be forced to redesign product candidates so that we no longer infringe the third-party intellectual property rights. Any of these events, even if we were ultimately to prevail, could require us to divert substantial financial and management resources that we would otherwise be able to devote to our business and could have a material and adverse effect on our business, financial condition, results of operations and prospects.
Intellectual property litigation could cause us to spend substantial resources and distract our personnel from their normal responsibilities.
Litigation or other legal proceedings relating to intellectual property claims, with or without merit, is unpredictable and generally expensive and time consuming and is likely to divert significant resources from our core business, including distracting our technical and management personnel from their normal responsibilities. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common stock. Moreover, such litigation or proceedings could substantially increase our operating losses and reduce the resources available for development activities or any future sales, marketing or distribution activities.
We may not have sufficient financial or other resources to adequately conduct such litigation or proceedings. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their greater financial resources and more mature and developed intellectual property portfolios. Accordingly, despite our efforts, we may not be able to prevent third parties from infringing upon or misappropriating or from successfully challenging our intellectual property rights. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our ability to compete in the marketplace.
If we fail to comply with our obligations under any license, collaboration or other agreements, we may be required to pay damages and could lose intellectual property rights that are necessary for developing and protecting our product candidates or we could lose certain rights to grant sublicenses.
Our current licenses impose, and any future licenses we enter into are likely to impose, various development, commercialization, funding, milestone, royalty, diligence, sublicensing, insurance, patent prosecution and enforcement and/or other obligations on us. If we breach any of these obligations, or use the intellectual property licensed to us in an unauthorized manner, we may be required to pay damages and the licensor may have the right to terminate the license, which could result in us being unable to develop, manufacture and sell any future products that are covered by the licensed technology or enable a competitor to gain access to the licensed technology. Moreover, our licensors may own or control intellectual property that has not been licensed to us and, as a result, we may be subject to claims, regardless of their merit, that we are infringing or otherwise violating the licensor’s rights. In addition, while we cannot determine currently the amount of the royalty obligations we would be required to pay on sales of future products, if any, the amounts may be significant. The amount of our future royalty obligations will depend on the technology and intellectual property we use in products that we successfully develop and commercialize, if any. Therefore, even if we successfully develop and commercialize products, we may be unable to achieve or maintain profitability.
Moreover, disputes may arise regarding intellectual property subject to a licensing agreement, including:
• the priority of invention of patented technology.
In addition, the agreements under which we currently license intellectual property or technology from third parties are complex, and certain provisions in such agreements may be susceptible to multiple interpretations. The resolution of any contract interpretation disagreement that may arise could narrow what we believe to be the scope of our rights to the relevant intellectual property or technology, or increase what we believe to be our financial or other obligations under the relevant agreement, either of which could have a material adverse effect on our business, financial condition, results of operations, and prospects. Moreover, if disputes over intellectual property that we have licensed prevent or impair our ability to maintain our current licensing arrangements on commercially acceptable terms, we may be unable to successfully develop and commercialize the affected product candidates, which could have a material adverse effect on our business, financial conditions, results of operations, and prospects.
We may be subject to claims that we or our employees or consultants have wrongfully used or disclosed alleged trade secrets of our employees’ or consultants’ former employers or their clients. These claims may be costly to defend and if we do not successfully do so, we may be required to pay monetary damages and may lose valuable intellectual property rights or personnel.
Many of our employees were previously employed at universities or biotechnology or biopharmaceutical companies, including our competitors or potential competitors. Although no claims against us are currently pending, we may be subject to claims that these employees or we have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their former employers. Litigation may be necessary to defend against these claims. If we fail in defending such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel. A loss of key research personnel or their work product could hamper our ability to commercialize, or prevent us from commercializing, our product candidates, which could severely harm our business. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management.
Patent terms may be inadequate to protect our competitive position on our product candidates for an adequate amount of time.
Patents have a limited lifespan. In the United States, if all maintenance fees are timely paid, the naturalexpiration of a patent is generally 20 years from its earliest U.S. non-provisional filing date. Various extensions may be available, but the life of a patent, and the protection it affords, is limited. Even if patents covering our product candidates are obtained, once the patent life has expired, we may be open to competition from competitive products, including generics or biosimilars. Given the amount of time required for the development, testing and regulatory review of new product candidates, patents protecting such candidates might expire before or shortly after such candidates are commercialized. As a result, our owned and licensed patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to ours.
Obtaining and maintaining our patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.
Periodic maintenance fees, renewal fees, annuity fees and various other governmental fees on patents and/or applications will be due to be paid to the USPTO and various governmental patent agencies outside of the United States in several stages over the lifetime of the patents and/or applications. We have systems in place to remind us to pay these fees, and we employ an outside firm and/or rely on our outside counsel to pay these fees due to non-U.S. patent agencies. The USPTO and various non-U.S. governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. We employ reputable law firms and other professionals to help us comply, and in many cases, an inadvertent lapse can be cured by payment of a late fee or by other means in accordance with the applicable rules. However, there are situations in which non-compliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, our competitors might be able to enter the market and this circumstance would have a material adverse effect on our business.
Changes in U.S. patent and ex-U.S. patent laws could diminish the value of patents in general, thereby impairing our ability to protect our products.