Item 1A. Risk Factors

Careful consideration should be given to the following risk factors, together with all other information set forth in this Annual Report on Form 10-K (“Annual Report”), including our consolidated financial statements and related notes, and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and in other documents that we file with the Securities and Exchange Commission (the “SEC”), in evaluating Scholar Rock Holding Corporation and our subsidiaries (collectively, the “Company”, “we”, or “our”) and our business, before investing in our common stock. Investing in our common stock involves a high degree of risk. If any of the following risks and uncertainties actually occurs, our business, prospects, financial condition and results of operations could be materially and adversely affected. The market price of our common stock could decline if one or more of these risks or uncertainties were to occur, which may cause you to lose all or part of the money you paid to buy our common stock. The risk factors described below disclose both material and other risks, and are not intended to be exhaustive and are not the only risks facing the Company. New risk factors can emerge from time to time, and it is not possible to predict the impact that any factor or combination of factors may have on our business, prospects, financial condition and results of operations. Certain statements below are forward-looking statements. See “Special Note Regarding Forward-Looking Statements” in this Annual Report.

Summary of the Material Risks Associated with Our Business

Our business is subject to numerous risks and uncertainties that you should be aware of before making an investment decision, including those highlighted in the section entitled “Risk Factors.” These risks include, but are not limited to, the following:

Risks Related to Product Development, Regulatory Approval and Commercialization

Table of Contents

Risks Related to Our Business and Operations

Risks Related to Intellectual Property

Risks Related to Our Financial Condition and Capital Requirements

Table of Contents

Risks Related to Our Common Stock

Risks Related to Product Development, Regulatory Approval and Commercialization

Product development involves a lengthy and expensive process, with an uncertain outcome. We may incur additional costs or experience delays in completing, or ultimately be unable to complete, the development and commercialization of apitegromab, SRK-181, SRK-439, or any future product candidates. Many of the factors that cause, or lead to, a delay in the initiation or completion of clinical trials may also ultimately lead to the denial of regulatory approval or limit market acceptance of our product candidates.

Before obtaining regulatory approvals for the commercial sale of any product candidates, we must demonstrate through extensive preclinical studies and clinical trials that our product candidates are safe and effective in humans. Clinical development is expensive and can take many years to complete, and its outcome is inherently uncertain, a clinical trial can fail at any stage of development. We may experience delays in initiating, progressing or completing our clinical trials. We may be unable to establish clinical endpoints that applicable regulatory authorities would consider clinically meaningful. Clinical trials may fail to meet their primary or secondary endpoints, raise safety concerns or generate mixed results. Differences in trial design between early-stage clinical trials and later-stage clinical trials make it difficult to extrapolate the results of earlier clinical trials to later clinical trials. Clinical data may not be sufficient to apply for and obtain regulatory approval on the timelines we expect or at all. Other decisions or actions of regulatory agencies may affect our plans, progress or results.

We also may experience numerous unforeseen events during, or as a result of, any clinical trials in process or any future clinical trials that we conduct that could delay or prevent our ability to receive marketing approval or commercialize apitegromab, SRK-181, SRK-439, or any future product candidates, including:

Table of Contents

● lack of adequate funding to complete a clinical trial.

Many of the factors that cause, or lead to, a delay in the initiation or completion of clinical trials may also ultimately lead to the denial of regulatory approval or limit market acceptance of our product candidates. For example, we anticipate some of our future trials to, in part, utilize an open-label trial design, and our ongoing Phase 1 DRAGON clinical trial for SRK-181 in cancer immunotherapy and our ongoing ONYX long-term extension study for apitegromab in patients from both the TOPAZ and SAPPHIRE trials, utilize an open-label trial design. An open-label trial is one where both the patient and investigator know whether the patient is receiving the test article or either an existing approved drug or placebo. Open-label trials are subject to various limitations that may exaggerate any therapeutic effect as patients in open-label studies are aware that they are receiving treatment. Open-label trials may be subject to a patient bias, for example, if patients perceive their symptoms to have improved merely due to their awareness of receiving an experimental treatment. Open-label trials also may be subject to an investigator bias where those assessing and reviewing the physiological outcomes of the clinical trials are aware of which patients have received treatment and may interpret the information of the treated group more favorably given this knowledge. The potential sources of bias in clinical trials as a result of open-label design may not be adequately mitigated and may cause any of our trials that utilize

Table of Contents

such design to fail and additional trials may be necessary to support future marketing applications. In addition, other types of trials (including randomized, double-blind, parallel arm studies), particularly if smaller in size or if limited to one study, are also subject to potential sources of bias and limitations that may exaggerate any therapeutic effect or falsely identify a positive efficacy signal, or conversely, fail to detect an efficacy signal when in fact there may actually be a positive therapeutic effect. Furthermore, we are conducting clinical trials with apitegromab in SMA, but by using apitegromab in a Phase 2 obesity clinical trial, we may become aware of safety information associated with apitegromab that we did not observe when we used apitegromab in our clinical trials in SMA. We, the FDA, the competent authorities and/or ethics committees of the EU Member States or other applicable regulatory authorities for their jurisdictions, or an IRB for their site(s) may suspend clinical trials of a product candidate at any time for various reasons, including a belief that subjects or patients in such trials are being exposed to unacceptable health risks or adverse side effects.

Our product development costs will increase if we experience delays in clinical testing or marketing approvals. We do not know whether any of our clinical trials will begin as planned, will need to be restructured or will be completed on schedule, or at all. Significant clinical trial delays could also shorten any periods during which we may have the exclusive right to commercialize our product candidates and may allow our competitors to bring products to market before we do, potentially impairing our ability to successfully commercialize our product candidates and harming our business and results of operations. Any delays in our clinical development programs may harm our business, financial condition and results of operations significantly.

Our clinical development strategy depends on the continued use and availability of certain third-party approved drug therapies.

Apitegromab and SRK-181 are our two clinical-stage product candidates. Patients in our Phase 3 SAPPHIRE clinical trial, and ONYX, our long-term extension study for patients from both the TOPAZ and SAPPHIRE studies, are receiving apitegromab in conjunction with an approved SMN therapy. These patients are reliant on the continued use and availability of such therapies. If access to an approved SMN therapy such as nusinersen or risdiplam becomes limited or is unavailable, we may be forced to pause or stop our SAPPHIRE or ONYX long-term extension trials, or the medical condition of patients may be affected which could negatively affect the efficacy and safety results for apitegromab in the trials or reduce the amount of data or confound the data from these trials. We plan to initiate a Phase 2 proof-of-concept trial of apitegromab in combination with approved GLP-1 RA in obesity. This study will rely upon the continued availability of such GLP-1 RA. Access to approved GLP-1 RAs are limited for use in clinical trials and may continue to be limited for such use. If GLP-1 RAs become more limited or unavailable, we may be unable to enroll, or may be delayed in enrolling patients, or may be forced to stop our Phase 2 study. While we have obtained substantial supply of an approved GLP-1 RA for use in this Phase 2 study, we cannot assure you that we will be able to obtain adequate supply for future studies of our product candidate in obesity. Patients in Part B of our ongoing Phase 1 DRAGON clinical trial of SRK-181 in patients with locally advanced or metastatic solid tumors that exhibit resistance to anti-PD-(L)1 antibody therapies are receiving SRK-181 in conjunction with an approved anti-PD-(L)1 therapy such as pembrolizumab. If access to the approved anti-PD-(L)1 therapy becomes limited or is unavailable, we may not be able to enroll, or may be delayed in enrolling patients or may be forced to pause or stop our Phase 1 DRAGON clinical trial, or the medical condition of patients may be affected which could negatively affect the efficacy and safety results for SRK-181 in the trial. Any delay or suspension of our clinical trials would significantly and delay our clinical development programs and harm our business, financial condition and results of operations.

The results or success of preclinical studies and early-stage clinical trials of our product candidates may not be predictive of future results or replicated in later preclinical studies or later-stage clinical trials. Preclinical studies and early-stage clinical trials are primarily designed to study PK and PD, understand the side effects of product candidates, and evaluate various doses and dosing schedules. Our current or future product candidates may demonstrate different chemical, biological and pharmacological properties in patients than they do in laboratory studies or may interact with human biological systems in unforeseen or harmful ways. Product candidates in later-stages of clinical trials may fail to show desired pharmacological properties or produce positive safety and efficacy results despite having progressed through

Table of Contents

preclinical studies and early-stage clinical trials. We completed a Phase 1 clinical trial for apitegromab in healthy adult volunteers and we completed the treatment period of our Phase 2 TOPAZ clinical trial for the treatment of patients with Type 2 and Type 3 SMA. In June 2023, we announced data from the Phase 2 TOPAZ trial extension period evaluating patient outcomes at 36 months of treatment with apitegromab. These data show that continued treatment with apitegromab over the extended period was associated with substantial and sustained improvement in motor function, and patient-reported outcomes in patients with nonambulatory Types 2 and 3 SMA receiving SMN therapy. Results on safety, efficacy and patient-reported outcomes such as fatigue, mobility and activities of daily living from TOPAZ were presented at the 2023 Cure SMA Research & Clinical Care Meeting. In January 2022, we initiated our Phase 3 SAPPHIRE clinical trial of apitegromab for the treatment of patients with Type 2 and Type 3 SMA and in September 2023, we announced completion of trial enrollment. We expect the top-line data readout for the SAPPHIRE trial in the fourth quarter of 2024. We also announced in October 2023 our plans to expand into cardiometabolic disorders based on preclinical data with SRK-439, and our intent to initiate a Phase 2 proof-of-concept trial of apitegromab in combination with a GLP-1 receptor agonist in obesity in mid-2024 with data readout expected in mid-2025. We cannot assure you that the Phase 3 SAPPHIRE clinical trial or any other future clinical trials of apitegromab, such as our planned Phase 2 clinical trial in obesity, or of SRK-439 will show positive results. Additionally, product candidates evaluated in one disease indication may interact in unforeseen or harmful ways in a patient population with a different disease indication than was previously studied. For example, we are evaluating apitegromab in SMA, and plan to initiate a Phase 2 clinical trial of apitegromab in obesity. Apitegromab may interact in unforeseen or different ways in the obesity population than in the SMA patient population. There can be no assurance that any of our current or planned clinical trials will ultimately be successful or support further clinical development of any of our product candidates. There can also be no assurance that any of our future clinical trials will show similar results to our earlier clinical trials or support further development or registration of any of our product candidates.

Interim, initial, or preliminary results from our clinical trials that we announce or publish from time to time may change (e.g. from positive safety or efficacy results to poor or negative safety or efficacy results) as more patient data become available and are subject to additional audit, validation and verification procedures that could result in material changes in the final data.

From time to time, we may publish interim, initial, or preliminary data, including interim top-line results or initial or preliminary results from our clinical trials. Any interim, initial or preliminary data and other results from our clinical trials may materially change as more patient data become available. Preliminary, initial, interim or top-line results also remain subject to audit, validation and verification procedures that may result in the final data being materially different from the interim, initial or preliminary data we previously published. As a result, interim, initial or preliminary data may not be predictive of final results and should be viewed with caution until the final data are available. We may also arrive at different conclusions, or considerations may qualify such results, once we have received and fully evaluated additional data. For example, clinical data from Part A and Part B of our Phase 1 DRAGON trial in cancer immunotherapy, including preliminary safety and efficacy results, were presented at the European Society for Medical Oncology Targeted Anticancer Therapies Congress in March 2023. Safety, efficacy and biomarker data were presented in November 2023 at the SITC 38th Annual Meeting, and we will continue to present data from our Phase 1 DRAGON trial while the trial is ongoing. Tumor response data is based on assessments by site investigators. Central reads for the tumor responses are also being conducted, with a comprehensive review of the central reads to be performed once completed within and/or across the cohorts. Differences between preliminary, initial or interim data and final data could adversely affect our business.

There is a high failure rate for drugs and biologics proceeding through clinical trials. A number of companies in the pharmaceutical and biotechnology industries have suffered significant setbacks in late-stage clinical development even after achieving promising results in earlier studies, and we cannot be certain that we will not face similar setbacks. Many drugs have failed to replicate efficacy and safety results in larger or more complex later stage trials. Moreover, preclinical and clinical data are often susceptible to varying interpretations and analyses, and many companies that believed their product candidates performed satisfactorily in preclinical studies and clinical trials nonetheless failed to obtain regulatory approval. If we fail to produce positive results in our ongoing and planned preclinical studies and clinical trials in apitegromab, SRK-181, SRK-439 or if a regulatory authority interprets and analyzes the results as not positive, the development timeline and regulatory approval and commercialization prospects for our product candidates, and, correspondingly, our business and financial prospects, may be materially adversely affected.

Table of Contents

If we encounter difficulties enrolling patients in our clinical trials, our clinical development activities could be delayed or otherwise adversely affected.

We may experience difficulties in patient enrollment in our clinical trials for a variety of reasons. The timely completion of clinical trials in accordance with their protocols depends, among other things, on our ability to enroll a sufficient number of patients who remain in the trial until its conclusion. The enrollment of patients depends on many factors, including:

● the patient eligibility and exclusion criteria defined in the protocol;

● the willingness or availability of patients to participate in our trials;

● the number and location of participating trial sites;

● the design of the trial;

● our ability to obtain and maintain patient consents; and

For example, we are initially developing apitegromab for the treatment of SMA, a rare disease, affecting an estimated 20,000 patients in the U.S. and Europe. As a result, we may encounter difficulties enrolling patients in our clinical trials for apitegromab due, in part, to the small size of this patient population. In addition, our clinical trials will compete with other clinical trials for product candidates that are in the same therapeutic areas as our product candidates, and this competition will reduce the number and types of patients available to us, because some patients who might have opted to enroll in our trials may instead opt to enroll in a trial being conducted by one of our competitors. Since the number of qualified clinical investigators is limited, we expect to conduct some of our clinical trials at the same clinical trial sites that some of our competitors use, which will reduce the number of patients who are available for our clinical trials in such clinical trial site. Additionally, patients may opt out of participation in clinical trials in favor of treatment with FDA-approved therapies, or therapies approved in the EU or other foreign jurisdictions.

Delays in patient enrollment may result in increased costs or may affect the timing or outcome of our future clinical trials, which could prevent completion of these trials and adversely affect our ability to advance the development of our product candidates.

We rely on third parties to conduct our clinical trials and certain aspects of our preclinical studies. If these third parties do not successfully carry out their contractual duties or meet expected deadlines or comply with legal and regulatory requirements, we may be delayed or unable to receive regulatory approval of or commercialize apitegromab, SRK-181, SRK-439, or any future product candidates, and our business could be materially harmed.

We depend upon third parties to conduct certain aspects of our preclinical studies and to conduct our clinical trials, under agreements with universities, medical institutions, CROs, strategic partners and others. We often have to negotiate

Table of Contents

budgets and contracts with such third parties, and if we are unsuccessful or if the negotiations take longer than anticipated, this could result in delays to our development timelines and increased costs.

We rely especially heavily on third parties over the course of our clinical trials, and, as a result, have limited control over the clinical investigators and limited visibility into their day-to-day activities, including with respect to their individual employment policies or compliance with the approved clinical protocol. Nevertheless, we are responsible for ensuring that each of our trials is conducted in accordance with the applicable protocol, legal and regulatory requirements and scientific standards, and our reliance on third parties does not relieve us of our regulatory responsibilities. We and these third parties are required to comply with Good Clinical Practice (“GCP”) requirements, which are regulations and guidelines enforced by the FDA and comparable foreign regulatory authorities for conducting, recording and reporting the results of clinical trials to assure that data and reported results are credible and accurate and that the rights, integrity and confidentiality of trial participants are protected. Regulatory authorities enforce these GCP requirements through periodic inspections of trial sponsors, clinical investigators and trial sites. If we or any of these third parties fail to comply with applicable GCP requirements, the clinical data generated in our clinical trials may be deemed unreliable and the FDA or comparable foreign regulatory authorities may require us to suspend or terminate these trials or perform additional preclinical studies or clinical trials before approving our marketing applications. We cannot be certain that, upon inspection, such regulatory authorities will determine that any of our clinical trials comply with the GCP requirements. We also are required to register ongoing clinical trials and post the results of completed clinical trials on a government-sponsored database, ClinicalTrials.gov, within specified timeframes. Failure to do so can result in civil monetary penalties, adverse publicity and civil and criminal sanctions. The FDA and National Institutes of Health have signaled the government’s willingness to begin enforcing these registration and reporting requirements against non-compliant clinical trial sponsors.

Our failure or any failure by these third parties to comply with these regulations would delay the regulatory approval process. Moreover, our business may be implicated if any of these third parties violate federal or state fraud and abuse or false claims laws and regulations or healthcare privacy and security laws.

Any third parties conducting aspects of our preclinical studies or clinical trials will not be our employees and, except for remedies that may be available to us under our agreements with such third parties, we cannot control whether they devote sufficient time and resources to our preclinical studies and clinical trials. The third party CROs and clinical trial sites that conduct our clinical trials have experienced staffing shortages and the inability of a CRO or clinical trial site to maintain appropriate levels of competent staffing to support the demands of our clinical trials could negatively impact the execution of our clinical trials. These third parties may also have relationships with other commercial entities, including our competitors, for whom they may also be conducting clinical trials or other product development activities, which could affect their performance on our behalf. If these third parties do not successfully carry out their contractual duties or obligations or meet expected deadlines if they need to be replaced or if the quality or accuracy of the preclinical or clinical data they obtain is compromised due to the failure to adhere to our protocols or regulatory requirements or for other reasons, our development timelines, including clinical development timelines, may be extended, delayed or terminated and we may not be able to complete development of, receive regulatory approval of or successfully commercialize our product candidates. As a result, our financial results and the commercial prospects for our product candidates would be harmed, our costs could increase and our ability to generate revenue could be delayed.

If any of our relationships with these third-party CROs or others terminate, we may not be able to enter into arrangements with alternative CROs or other third parties or to do so on commercially reasonable terms. Switching or adding additional CROs involves additional cost and requires management time and focus. In addition, there is a natural transition period when a new CRO begins work. As a result, delays may occur, which can materially impact our ability to meet our desired development timelines. Though we carefully manage our relationships with our CROs, there can be no assurance that we will not encounter similar challenges or delays in the future or that these delays or challenges will not have a material adverse impact on our business, financial condition and prospects.

Table of Contents

We have never commercialized a product and will need to build and scale our business for potential commercialization of apitegromab, including building our compliance, medical affairs and commercial organizations, which, if we are not able to do so successfully could negatively impact our business, including the potential for a successful commercialization of apitegromab.

Although we are preparing our commercialization capabilities in anticipation of a potential approval and commercial launch of apitegromab, we have no prior sales or distribution experience and limited capabilities for marketing and market access. We expect to invest significant financial and management resources over time to establish compliance, medical affairs and commercial organizations for the marketing, sales and distribution of apitegromab, if approved, and other capabilities and infrastructure to support commercial operations. If we are unable to establish these commercial capabilities and infrastructure in a timely manner or to enter into agreements with third parties to market, sell, and/or distribute apitegromab if approved, we may be unable to complete a successful commercial launch. To the extent we enter into agreements with third parties, the revenue we receive may depend upon the efforts of such third parties, over which we may have limited or no control, and our revenue from product sales may be lower than if we had commercialized the products ourselves. We also face competition in our search for third parties to assist us with the distribution, sales and marketing of our products.

Furthermore, we intend to commercialize apitegromab globally, if approved. In order to do so, we must build, on a territory-by-territory basis, marketing, sales, distribution, managerial and other capabilities or make arrangements with third parties to perform these services, and we may not be successful in doing so.

The regulatory approval process for our product candidates in the U.S., EU and other jurisdictions will be lengthy, time-consuming and inherently unpredictable and we may fail to receive or be delayed in receiving regulatory approval of apitegromab, SRK-181, SRK-439 and future product candidates.

The research, testing, manufacturing, labeling, approval, sale, import, export, marketing, promotion and distribution of drug products, including biologics, are subject to extensive regulation by the FDA in the U.S. and other regulatory authorities outside the U.S. We are not permitted to market any biological product in the U.S. until we receive a biologics license from the FDA. We have not previously submitted a BLA to the FDA or similar marketing application to comparable foreign authorities. A BLA must include extensive preclinical and clinical data and supporting information to establish that the product candidate is safe, pure and potent for each desired indication. FDA approval of a new biologic or drug generally requires dispositive data from two (and in some cases, one) adequate and well-controlled pivotal Phase 3 clinical trials of the biologic or drug in the relevant patient population. The FDA, EMA or comparable foreign regulatory authorities may disagree with the design or implementation of our clinical trials, the results of our clinical trials may not meet the level of statistical significance or amount of data required for approval, we may be unable to demonstrate that our product candidates’ clinical and other benefits outweigh their safety risks, or may disagree with our analysis or interpretation of data from preclinical studies or clinical trials. A BLA must also include significant information regarding the chemistry, manufacturing, and controls for the product, and the manufacturing facilities must complete a successful pre-license inspection as well as certain key clinical sites conducting our clinical trials. The FDA, EMA or comparable foreign regulatory authorities may fail to approve the manufacturing processes or facilities of third-party manufacturers with which we contract for clinical and commercial supplies.

The FDA may seek independent advice from a panel of experts, referred to as an Advisory Committee, on complex or novel issues that may be presented in an application, including issues related to the adequacy of the safety and efficacy data to support approval. The opinion of the Advisory Committee, although not binding, may have a significant impact on our ability to receive approval of any product candidates that we develop based on the completed clinical trials.

Further, a clinical trial may be suspended or terminated by us, the IRBs for the institutions at which such trials are being conducted, or the FDA, the competent authorities and/or ethics committees of the EU Member States or other regulatory authorities, or recommended for suspension or termination by the DSMB for such trial, due to a number of factors, including failure to conduct the clinical trial in accordance with regulatory requirements or our clinical protocols, inspection of the clinical trial operations or trial site by the FDA, EMA, competent authorities of the EU Member States or other regulatory authorities resulting in the imposition of a clinical hold, unforeseen safety issues or adverse side effects, failure to demonstrate a benefit from using a product candidate, changes in governmental regulations or

Table of Contents

administrative actions or lack of adequate funding to continue the clinical trial. If we experience termination of, or delays in the completion of, any clinical trial of our product candidates, the prospects for regulatory approval and commercial prospects for our product candidates will be harmed, and our ability to generate product revenue will be delayed. In addition, any delays in completing any clinical trials will increase our costs, slow down our product development and approval process and jeopardize our ability to commence product sales and generate revenue.

We have received Orphan Drug designation from the FDA for apitegromab for the treatment of SMA and the EC granted Orphan Medicinal Product designation to apitegromab for the treatment of SMA. We may seek Orphan Drug designation from regulatory authorities in other jurisdictions for apitegromab and Orphan Drug designation from the FDA, EC or regulatory authorities in other jurisdictions for our other product candidates. In any of these instances, we may not receive the requested designation or we may be unable to realize the benefits associated with Orphan Drug designation, including the potential for market exclusivity.

We have received Orphan Drug designation from the FDA for apitegromab for the treatment of SMA, and following the EMA’s COMP’s positive opinion, the EC designated apitegromab as an orphan medicinal product for the treatment of SMA. Even if we receive orphan drug exclusivity, the benefit of that exclusivity may be limited if we seek approval for an indication broader than the orphan-designated indication or could be revoked under certain circumstances, for example if the FDA later determines that the request for designation was materially defective or that we are unable to assure sufficient quantities of the product to meet the needs of patients with the rare disease or condition. Further, even if we receive orphan drug exclusivity for a product, that exclusivity may not effectively protect the product from competition during the exclusivity period because different drugs with different active moieties can be approved for the same condition, and the same product can be approved for different uses. Also, in the U.S., even after an orphan drug is approved and receives orphan drug exclusivity, the FDA may subsequently approve another drug for the same condition if the FDA concludes that the latter drug is not the same drug, including because it has been shown to be clinically superior to the drug with exclusivity because it is safer, more effective or makes a major contribution to patient care. In the EU, a marketing authorization may be granted to a similar medicinal product to an authorized orphan product for the same orphan indication if:

We have received Rare Pediatric Disease designation for apitegromab for the treatment of SMA. However, a marketing application for apitegromab, if approved, may not meet the eligibility criteria for a rare pediatric disease priority review voucher.

We have received Rare Pediatric Disease designation for apitegromab for the treatment of SMA. Designation of a biologic as a product for a rare pediatric disease does not guarantee that a BLA for such biologic will meet the eligibility criteria for a rare pediatric disease priority review voucher at the time the application is approved. Under the Federal Food, Drug, and Cosmetic Act (“FDCA”), we will need to request a rare pediatric disease priority review voucher in our original BLA for apitegromab. The FDA may determine that a BLA for apitegromab, if approved, does not meet the eligibility criteria for a rare pediatric disease priority review voucher, including for the following reasons:

● SMA no longer meets the definition of a rare pediatric disease;

Table of Contents

● the BLA is not deemed eligible for priority review;

The authority for the FDA to award rare pediatric disease priority review vouchers for biologics after September 30, 2024 is currently limited to biologics that receive Rare Pediatric Disease designation on or prior to September 30, 2024, and the FDA may only award rare pediatric disease priority review vouchers through September 30, 2026. If the BLA for apitegromab is not approved on or prior to September 30, 2026 for any reason, it will not be eligible for a priority review voucher. However, it is possible the authority for the FDA to award rare pediatric disease priority review vouchers will be further extended by Congress.

We have received Fast Track designation from the FDA and PRIME designation from the EMA for apitegromab for the treatment of SMA. We may seek Fast Track designation from the FDA, or Breakthrough Therapy designation or PRIME designation from the EMA for certain of our current and future product candidates, and we may not be successful in receiving such designations, or if received, such designation may not actually lead to a faster development or regulatory review or approval process.

We may seek Fast Track designation, Breakthrough Therapy designation or PRIME designation for certain of our product candidates.

In May 2021, the FDA granted Fast Track designation for apitegromab for the treatment of SMA. The FDA has broad discretion whether or not to grant this designation, so even if we believe a particular product candidate is eligible for this designation, we cannot assure that the FDA would decide to grant it. Although the FDA has granted Fast Track designation for apitegromab in SMA, we may not experience a faster development process, review or approval compared to conventional FDA procedures. The FDA may withdraw Fast Track designation if it believes that the designation is no longer supported by data from our clinical development program.

Designation as a breakthrough therapy is within the discretion of the FDA. Accordingly, even if we believe one of our product candidates meets the criteria for designation as a breakthrough therapy, the FDA may disagree and instead determine not to make such designation. In any event, the receipt of a Breakthrough Therapy designation for a product candidate may not result in a faster development process, review or approval compared to products considered for approval under conventional FDA procedures and does not assure ultimate approval by the FDA. In addition, even if one or more of our product candidates qualify as breakthrough therapies, the FDA may later decide that the products no longer meet the conditions for qualification and rescind the breakthrough designation. See the sections of this Annual Report on Form 10-K for the fiscal year ended December 31, 2023 entitled, “Business — Government Regulation — US Biological Product Development — Expedited Development and Review Programs.”

In March 2021, the EMA granted PRIME designation to apitegromab for the treatment of SMA. PRIME is a scheme provided by the EMA to enhance support for the development of medicines that target an unmet medical need. The receipt of PRIME designation for apitegromab for the treatment of SMA may not result in a faster development process, review or approval compared to products considered for approval under conventional regulatory agency procedures and does not assure ultimate approval by the EMA.

See the section of this Annual Report on Form 10-K for the fiscal year ended December 31, 2023 entitled, “Business – Government Regulation – European Union Drug Development — European Union Expedited Review and Development.”

Table of Contents

Receiving and maintaining regulatory approval of our product candidates in one jurisdiction does not mean that we will be successful in receiving or maintaining regulatory approval of our product candidates in other jurisdictions.

Receiving and maintaining regulatory approval of our product candidates in one jurisdiction does not guarantee that we will be able to receive or maintain regulatory approval in any other jurisdiction, but a failure or delay in receiving regulatory approval in one jurisdiction may have a negative effect on the regulatory approval process in other jurisdictions. Even if the FDA grants marketing approval of a product candidate, the EC, the competent authorities of EU Member States or comparable regulatory authorities in foreign jurisdictions may not approve the manufacturing, marketing and promotion of the product candidate in other countries. Approval procedures vary among jurisdictions and can involve requirements and administrative review periods different from, and greater than, those in the U.S., including additional preclinical studies or clinical trials, as clinical trials conducted in one jurisdiction may not be accepted by regulatory authorities in other jurisdictions. In many jurisdictions outside the U.S., a product candidate must be approved for reimbursement before it can be approved for sale in that jurisdiction. In some cases, the price that we intend to charge for our products is also subject to approval.

We may also submit marketing applications in other countries. Regulatory authorities in jurisdictions outside of the U.S. have requirements for approval of product candidates with which we must comply prior to marketing in those jurisdictions. Receiving foreign regulatory approvals and compliance with foreign regulatory requirements could result in significant delays, difficulties and costs for us and could delay or prevent the introduction of our products in certain countries. If we fail to comply with the regulatory requirements in international markets and/or receive applicable marketing approvals, our target market will be reduced and our ability to realize the full market potential of our product candidates will be harmed.

Even if we receive regulatory approval of any product candidates, we will be subject to ongoing regulatory obligations and continued regulatory review, which may result in significant additional expense and we may be subject to penalties if we fail to comply with regulatory requirements or experience unanticipated problems with our product candidates.

If any of our product candidates are approved, they will be subject to ongoing regulatory requirements, including requirements related to manufacturing, labeling, packaging, storage, advertising, promotion, sampling, record-keeping, import, export, conduct of post-marketing studies and submission of safety, efficacy and other post-marketing information. In addition, we will be subject to continued compliance with current Good Manufacturing Practice (“cGMP”) and GCP requirements for any clinical trials that we conduct post-approval.

Manufacturers and manufacturers’ facilities are required to comply with extensive FDA, EU and comparable foreign regulatory authority requirements, including ensuring that quality control and manufacturing procedures conform to cGMP regulations. As such, we and our contract manufacturers will be subject to periodic review and inspections to assess compliance with cGMP and adherence to commitments made in any BLA or other marketing application and previous responses to inspection observations. Accordingly, we and others with whom we work must continue to expend time, money, and effort in all areas of regulatory compliance, including manufacturing, production and quality control.

Any regulatory approvals that we receive for our product candidates may be subject to limitations on the approved uses for which the product may be marketed or contain requirements for potentially costly post-market testing, including Phase 4 clinical trials and surveillance to monitor the safety and efficacy of the product candidate. The FDA may also require a REMS program as a condition of approval of our product candidates, which could entail requirements for long-term patient follow-up, a medication guide, physician communication plans or additional elements to ensure safe use, such as restricted distribution methods, patient registries and other risk minimization tools.

Later discovery of previously unknown problems with our product candidates, including adverse events of unanticipated severity or frequency, or with our third-party manufacturers or manufacturing processes, or failure to comply with regulatory requirements may result in revisions to the approved labeling to add new safety information; imposition of post-market studies or clinical trials to assess new safety risks; or imposition of distribution restrictions or other restrictions under a REMS program. Other potential consequences include, among other things:

Table of Contents

● fines, warning letters, untitled letters or holds on clinical trials;

The FDA strictly regulates marketing, labeling, advertising, and promotion of products that are placed on the market. Products may be promoted only for their approved indications and in a manner consistent with their FDA-approved labeling. The FDA and other agencies actively enforce the laws and regulations prohibiting the promotion of unapproved uses and a company that is found to have improperly promoted unapproved uses may be subject to significant liability.

We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the U.S. or abroad. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may face enforcement action and our business may be harmed.

Even if a product candidate we develop receives marketing approval, it may fail to achieve the degree of market acceptance by physicians, patients, third-party payors and others in the medical community necessary for commercial success.

If apitegromab, SRK-181, SRK-439 or any future product candidate we develop receives marketing approval, whether as a single agent or in conjunction with other therapies, it may nonetheless fail to gain sufficient market acceptance by physicians, patients, third-party payors, and others in the medical community. For example, doctors may deem it sufficient to treat patients with SMA with an SMN therapy such as nusinersen or risdiplam, and therefore will not be willing to utilize apitegromab in conjunction with such SMN therapy. If the product candidates we develop do not achieve an adequate level of acceptance, we may not generate significant product revenues and we may not become profitable. The degree of market acceptance of any product candidate, if approved for commercial sale, will depend on a number of factors, including:

● efficacy and potential advantages compared to alternative treatments;

● convenience and ease of administration compared to alternative treatments;

● the strength of marketing and distribution support;

● the prevalence and severity of any side effects.

Table of Contents

Competing therapies may exist or could emerge that adversely affect the amount of revenue we are able to generate from the sale of apitegromab, if approved, or any of our future product candidates, if successfully developed and approved.

The biopharmaceutical industry is highly competitive. There are many public and private companies, universities, governmental agencies and other research organizations actively engaged in the research and development of products that may be similar to our product candidates or address similar markets. If we are successful in developing apitegromab, it is probable that the number of companies seeking to develop products and therapies similar to our products candidates or targeting similar indications will increase. Many of our potential competitors, alone or with their strategic partners, have substantially greater financial, technical and human resources than we do, and significantly greater experience in the discovery and development of product candidates, obtaining FDA and other regulatory approvals of treatments and the commercialization of those treatments. Mergers and acquisitions in the biotechnology and pharmaceutical industries may result in even more resources being concentrated among a smaller number of our competitors. We expect competition in the indications we are pursuing will focus on efficacy, safety, convenience, availability, and price. The commercial opportunity for apitegromab, if approved, could be reduced or eliminated if our competitors develop and commercialize products that are perceived to be safer, more effective, have fewer or less severe side effects, are more convenient or are less expensive than apitegromab. Our competitors also may obtain FDA or other regulatory approval for their products more rapidly than we may obtain approval for ours, which could result in our competitors establishing a strong market position before we are able to enter the market.

Preclinical development is uncertain. Our preclinical programs, such as SRK-439, may experience delays or may never advance to clinical trials, which would adversely affect our ability to develop our product pipeline and receive regulatory approvals or commercialize these programs on a timely basis or at all, which would have an adverse effect on our business.

Before we can commence clinical trials for any product candidate, we must complete extensive preclinical studies that support our planned INDs in the U.S., or similar applications in other jurisdictions. We cannot be certain of the timely completion or outcome of our preclinical studies or of the timing of any planned IND submission to the FDA or similar applications in other jurisdictions, and cannot predict if the FDA, EMA or other regulatory authorities will accept our proposed clinical programs or if the outcome of our preclinical studies will ultimately support the further development of our programs. As a result, we cannot be sure that we will be able to submit INDs or similar applications for the clinical development of our preclinical programs, such as our potential IND for SRK-439, on the timelines we expect, if at all, and we cannot be sure that submission of INDs or similar applications will result in the FDA, the competent authorities and/or ethics committees in the EU Member States or other regulatory authorities allowing clinical trials to begin.

Conducting preclinical testing can be a lengthy, time-consuming and expensive process. The time required for such testing may vary substantially according to the type, complexity and novelty of the program, and can be several years or more per program. Delays associated with programs for which we are conducting preclinical testing and studies may cause us to incur additional operating expenses. We also may be affected by delays associated with the preclinical testing and studies of certain programs that are the responsibility of our collaborators or our potential future collaborators over which we have limited or no control. The commencement and rate of completion of preclinical studies for a product candidate may be delayed by many factors, including, for example, challenges in reaching consensus with regulatory agencies regarding the scope of the necessary preclinical study program and/or appropriate preclinical study designs.

Table of Contents

Risks Related to Our Business and Operations

Because we rely on a limited number of third-party manufacturing and supply partners, our supply of research and development, preclinical and clinical development materials, and, if approved, commercial materials, may become limited or interrupted or may not be of satisfactory quantity or quality.

We rely on a limited number of third-party contract manufacturers to manufacture all of our clinical trial product supplies and, if approved, all of our commercial product supplies, including all of our drug substance, drug product, labeling, and packaging. We do not own our own manufacturing facilities for producing any clinical trial or commercial product supplies. There can be no assurance that our preclinical, clinical development, and, if approved, commercial product supplies will not be limited or interrupted due to impacts to our third-party contract manufacturers. For example, we rely on a single source supplier for the manufacture of apitegromab and SRK-181. Any replacement of our current drug substance contract manufacturer or drug product contract manufacturer would require significant resources, lead time and expertise because there may be a limited number of qualified replacements. In addition, our ability to procure sufficient supplies for the development of apitegromab, SRK-181, SRK-439 or future product candidates could be impacted by factors outside of our control such as current macroeconomic and geopolitical events and the changing rates of inflation and interest rates. In addition, we have no direct control over our contract manufacturers’ ability to maintain adequate quality control, quality assurance and qualified personnel. Furthermore, all of our third-party contract manufacturers supply and/or manufacture materials or products for other companies, which exposes our third-party contract manufacturers to regulatory risks for the production of such materials and products. As a result, failure to satisfy the regulatory requirements for the production of those materials and products may affect the regulatory clearance of our contract manufacturers’ facilities generally.

The manufacturing process for a product candidate is subject to FDA and foreign regulatory authority review. Suppliers and manufacturers must meet applicable manufacturing requirements and undergo rigorous facility and process validation tests required by regulatory authorities in order to comply with regulatory standards, such as cGMP. In the event that any of our manufacturers fails to comply with such requirements or to perform its obligations to us in relation to quality, timing or otherwise, or if our supply of components or other materials becomes limited or interrupted for other reasons, we may be forced to manufacture the materials ourselves, for which we currently do not have the capabilities or resources, or enter into an agreement with another third-party, which we may not be able to do on reasonable terms, if at all. In some cases, the technical skills or technology required to manufacture our product candidates may be unique or proprietary to the original manufacturer and we may have difficulty transferring such skills or technology to another third-party and a feasible alternative may not exist. These factors would increase our reliance on the original manufacturer or require us to obtain a license from such manufacturer in order to have another third-party manufacture our product candidates. If we must change manufacturers for any reason, we will be required to verify that the new manufacturer maintains facilities and procedures that comply with quality standards and with all applicable regulations and guidelines. We will also need to verify, such as through a manufacturing comparability study, that any new manufacturing process will produce our product candidate according to the specifications previously submitted to the FDA or another regulatory authority. The delays associated with the verification of a new manufacturer could negatively affect our ability to develop product candidates in a timely manner or within budget.

We expect to continue to rely on third-party manufacturers for commercial supplies of drug substance, drug product, and packaged and labeled product for apitegromab, if we receive regulatory approval. We will also rely on our contract manufacturers to manufacture sufficient quantities of apitegromab to produce validation batches. We do not have long-term supply agreements in place with any of our contract manufacturers, and each batch of our product candidates is individually contracted through a purchase order governed by master service and quality agreements. If our existing contract manufacturers for our product candidates are not willing to enter into long-term supply agreements, or are not willing or are unable to supply product candidate supplies to us, we could be required to engage new contract manufacturers who would need to scale up the manufacturing process before we would be able to use the product candidate supplies they manufacture, which could result in delays to our clinical trials or future commercialization plans, if we are successful and gain approval.

Table of Contents

To the extent that we have existing, or in the future enter into, manufacturing arrangements with third parties, we will depend on these third parties to perform their obligations in a timely manner consistent with contractual and regulatory requirements, including those related to quality control and assurance. If we are unable to obtain or maintain third-party manufacturing for product candidates, or to do so on commercially reasonable terms, we may not be able to develop and commercialize our product candidates successfully. Our or a third-party’s failure to execute on our manufacturing requirements and comply with cGMP could adversely affect our business in a number of ways, including:

● loss of the cooperation of an existing or future collaborator;

In addition, we contract with fill and finishing providers which we believe have the appropriate expertise, facilities and scale to meet our needs. Failure to maintain compliance with cGMP can result in a contractor receiving FDA sanctions, which can impact our ability to operate or lead to delays in any clinical development programs. We believe that our current fill and finish contractors are operating in accordance with cGMP, but we can give no assurance that the FDA, EMA, competent authorities of the EU Member States or other regulatory agencies will not conclude that a lack of compliance exists. In addition, any delay in contracting for fill and finish services, or failure of the contract manufacturer to perform the services as needed, may delay any clinical trials, registration and commercial launches, which could negatively affect our business.

Our reliance on third parties, such as manufacturers, may subject us to risks relating to manufacturing scale-up and may cause us to undertake substantial obligations, including financial obligations.

In order to continue to conduct later-stage clinical trials, or, if approved, produce commercial product, we will need to manufacture such product candidate in large quantities. In particular, we expect to rely on our contract manufacturers to scale our manufacturing processes for future clinical trials of apitegromab, and if our development efforts are successful and if apitegromab is approved, for commercial supply of apitegromab. We, or any manufacturing partners, may be unable to successfully increase the manufacturing capacity for apitegromab in a timely or cost-effective manner to meet our supply requirements. In addition, quality-control issues may arise during scale-up activities. If we, or any manufacturing partners, are unable to successfully scale-up the manufacture of our product candidates in sufficient quality and quantity, the development, testing, clinical trials, and if approved, commercial supply, of that product candidate may be delayed or infeasible, and regulatory approval, commercial launch or commercial supply of any resulting product may be delayed or not received, which could significantly harm our business.

We will need to continue to grow our organization in certain areas,including our personnel, systems and relationships with third parties, in order to develop our product candidates, and we may experience difficulties in managing this growth.

As our clinical development plans and commercialization strategies continue to develop and expand, we expect we will need to hire additional managerial, clinical development, scientific, regulatory, commercial, and administrative

Table of Contents

personnel. Our ability to compete in the highly competitive biotechnology industry depends upon our ability to attract and retain highly qualified specialized personnel. As apitegromab approaches commercialization, we will also need to hire sales, marketing and other commercial personnel. Future growth would impose significant added responsibilities on members of management, including:

Our future financial performance and our ability to commercialize apitegromab, SRK-181, SRK-439 and future product candidates, if approved, will depend, in part, on our ability to effectively manage any future growth, and our management may also have to divert a disproportionate amount of its attention away from day-to-day activities in order to devote a substantial amount of time to managing these growth activities.

We currently rely, and for the foreseeable future will continue to rely, in substantial part on third parties, advisors and consultants to provide certain services, including CROs, contract manufacturers and companies focused on antibody development and discovery activities. There can be no assurance that the services of third parties, advisors and consultants will continue to be available to us on a timely basis when needed, or that we can find qualified replacements. In addition, if we are unable to effectively manage our outsourced activities or if the quality, accuracy or quantity of the services provided is compromised for any reason, our preclinical studies and clinical trials may be extended, delayed or terminated, and we may not be able to receive, or may be substantially delayed in receiving, regulatory approval of apitegromab, SRK-181, SRK-439 or future product candidates or otherwise advance our business. There can be no assurance that we will be able to manage our existing consultants or find other competent outside contractors and consultants on economically reasonable terms, or at all.

We may not be able to attract or retain qualified management and scientific personnel in the future due to the intense competition for a limited number of qualified personnel in the biopharmaceutical space, especially those engaged in oncology and immuno-oncologyand cardiometabolic fields. In this highly competitive market, there may be increased costs to attract and retain qualified personnel. Many of the other pharmaceutical companies that we compete against for qualified personnel have greater financial resources, different risk profiles and a longer history in the industry than we do. They also may provide more diverse opportunities and better chances for career advancement. Some of these characteristics may be more appealing to high quality candidates than what we have to offer. If we are not able to offer competitive compensation or appealing opportunities for high quality candidates, we may not be able to attract or retain qualified candidates and personnel.If we are not able to effectively expand our organization by hiring new employees and expanding our groups of consultants and contractors, we may not be able to successfully implement the tasks necessary to further develop and commercialize apitegromab, SRK-181, SRK-439 or any future product candidates and, accordingly, may not achieve our research, development and commercialization goals.

Our executives and highly skilled technical and managerial personnel are critical to our business. If we have transition in management, lose key personnel, or if we fail to recruit additional highly skilled personnel, our ability to further develop apitegromab, SRK-181 and SRK-439 and identify and develop new or next generation product candidates may be impaired.

Our performance substantially depends on the performance of our management team. Any transition or loss of the services of any of our executives or highly skilled technical and managerial personnel could have a disruptive impact on our ability to implement our strategy and impede the achievement of our research, development and commercialization objectives. In addition, these transitions or departures could, cause us to incur increased operating expenses, divert senior management resources in searching for replacements, or otherwise have a material adverse effect on our business, internal controls, financial condition and results of operations. Management transition inherently causes some loss of institutional knowledge, which can negatively affect strategy and operational execution during this phase. If we have

Table of Contents

additional changes to our executives or highly skilled technical and managerial personnel, we may be unable to successfully manage and grow our business, and our results of operations, execution of corporate goals, internal controls and financial condition could suffer as a result. The unplanned loss of the services of our executives or other personnel also could harm our reputation.

Our internal computer systems, or those used by our contract research organizations, or other contractors or consultants, may fail or suffer security breaches.

We have outsourced significant parts of our IT and business infrastructure to third-party providers, and we currently use these providers to perform business critical IT and business services for us.Despite the implementation of security measures, our computer systems, whether they are managed by us directly or by the third parties with whom we contract, and those of our existing and future CROs, and other contractors and consultants are vulnerable to damage from computer viruses and unauthorized access. While we have not experienced any such material system failure or security breach to date, if such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our development programs and our business operations. Our increased reliance on personnel working from home may increase our cyber security risk, create data accessibility concerns, and make us more susceptible to workforce and communication disruptions, any of which could adversely impact our business operations or delay necessary interactions with local and federal regulators, ethics committees, manufacturing sites, research or clinical trial sites and other agencies and contractors. For example, the loss of preclinical or clinical data could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the data. Likewise, we rely on third parties for the manufacture of apitegromab, SRK-181 and SRK-439 and to conduct preclinical studies and clinical trials, and similar events relating to their computer systems could also have a material adverse effect on our business. To the extent that any disruption or security breach were to result in a loss of, or damage to, our data or applications, or inappropriate disclosure of confidential or proprietary information, we could incur liability and the further development and commercialization of apitegromab, SRK-181, SRK-439 and future product candidates could be delayed.

As a company that uses IT systems, our systems may be subject to cyber-attacks. Due to the nature of some of these attacks, there is a risk that they may remain undetected for a period of time. While we have invested in the protection of data and information technology, our efforts may not prevent service interruptions or security breaches (e.g., ransomware attacks). We maintain cyber liability insurance; however, this insurance may not be sufficient to cover the financial, legal, business, or reputational losses that may result from an interruption or breach of our systems.

Our employees, independent contractors, consultants, commercial partners and vendors may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk of employee fraud or other illegal activity by our employees, independent contractors, consultants, commercial partners and vendors. Misconduct by these parties could include intentional, reckless and/or negligent conduct that fails to comply with the laws and regulations of the FDA, EU Member States, EMA and other similar foreign regulatory bodies; provide true, complete and accurate information to the FDA, EMA and other similar foreign regulatory bodies; comply with manufacturing standards we have established; comply with healthcare fraud and abuse laws in the U.S. and similar foreign fraudulent misconduct laws; or report financial information or data accurately or to disclose unauthorized activities to us. If we receive FDA approval of apitegromab, SRK-181, SRK-439 or any future product candidates and begin commercializing those products in the U.S., our potential exposure under such laws will increase significantly, and our costs associated with compliance with such laws are also likely to increase. These laws may impact, among other things, our current activities with principal investigators and research patients, as well as proposed and future sales, marketing and education programs. We have adopted a code of business conduct and ethics, but it is not always possible to identify and deter misconduct by our employees, independent contractors, consultants, commercial partners and vendors, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to comply with these laws or regulations. If any actions are instituted against us and we are not successful in defending ourselves or asserting our rights, those actions could result in the imposition of civil, criminal and administrative penalties, damages, monetary fines, individual imprisonment, disgorgement, possible exclusion from participation in government healthcare programs, additional reporting obligations and oversight if we become subject to a corporate integrity agreement or other agreement to resolve allegations of non-compliance with

Table of Contents

these laws, contractual damages, reputational harm, diminished profits and future earnings and the curtailment of our operations, any of which could adversely affect our ability to operate our business, financial condition and results of operations.

Ongoing healthcare legislative and regulatory reform measures may have a material adverse effect on our business and results of operations.

Changes in statutes, regulations or the interpretation of existing statutes or regulations could impact our business in the future by requiring, for example: (i) changes to our manufacturing arrangements; (ii) additions or modifications to product labeling; (iii) the recall or discontinuation of our products; (iv) additional record-keeping requirements; or (v) changes to our pricing arrangements, or coverage of or reimbursement for our products. If any such changes were to be imposed, they could adversely affect the profitability and operation of our business. See the sections of this Annual Report on Form 10-K for the fiscal year ended December 31, 2023 entitled, “Business — Government Regulation — Current and Future Healthcare Reform Legislation” and “Business – Government Regulation – Coverage and Reimbursement.”

It is possible that the ACA, as currently enacted or as it may be amended or otherwise modified in the future, as well as other healthcare reform measures that may be adopted in the future, may result in additional reductions in Medicare or other healthcare funding, more rigorous coverage criteria, or new payment methodologies or otherwise affect the prices we may obtain for any of our product candidates for which we may receive regulatory approval. Any reduction in reimbursement from Medicare or other government programs may result in a similar reduction in payments from commercial payors. We cannot predict the reform initiatives that may be adopted in the future or whether initiatives that have been adopted will be modified or invalidated. The continuing health care reform initiatives efforts of the government, insurance companies, managed care organizations and other payers of health care services to contain or reduce costs of health care may adversely affect the demand for any product candidates for which we may obtain regulatory approval, our ability to set a price that we believe is fair for our products, our ability to obtain coverage and reimbursement approval for a product, our ability to generate revenues and achieve or maintain profitability; and the level of taxes that we are required to pay.

Our relationships with healthcare providers and physicians and third-party payors will be subject to applicable anti-kickback, fraud and abuse and other healthcare laws and regulations, which could expose us to criminal sanctions, civil penalties, contractual damages, reputational harm and diminished profits and future earnings.

Healthcare providers, physicians and third-party payors in the U.S. and elsewhere play a primary role in the recommendation and prescription of pharmaceutical products. Arrangements with third-party payors and customers can expose pharmaceutical manufacturers to broadly applicable fraud and abuse and other healthcare laws and regulations, including, without limitation, the federal Anti-Kickback Statute and the federal False Claims Act (“FCA”), which may constrain the business or financial arrangements and relationships through which such companies sell, market and distribute pharmaceutical products. In particular, the research of our product candidates, as well as the promotion, sales and marketing of healthcare items and services, as well as certain business arrangements in the healthcare industry, are subject to extensive laws designed to prevent fraud, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, structuring and commission(s), certain customer incentive programs and other business arrangements generally. Activities subject to these laws also involve the improper use of information received in the course of patient recruitment for clinical trials.See the section in this Annual Report on Form 10-K for the fiscal year ended December 31, 2023 entitled “Business – Government Regulation – Other Healthcare Laws.”

It is possible that governmental and enforcement authorities will conclude that our business practices may not comply with current or future statutes, regulations or case law interpreting applicable fraud and abuse or other healthcare laws and regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of civil, criminal and administrative penalties, damages, fines, disgorgement, individual imprisonment, possible exclusion from participation in federal and state funded healthcare programs, contractual damages and the curtailment or restricting of our operations, as well as additional reporting obligations and oversight if we become subject to a corporate integrity

Table of Contents

agreement or other agreement to resolve allegations of non-compliance with these laws. Any action for violation of these laws, even if successfully defended, could cause a pharmaceutical manufacturer to incur significant legal expenses and divert management’s attention from the operation of the business. Prohibitions or restrictions on sales or withdrawal of future marketed products could materially affect business in an adverse way.

Failure to comply with health care privacy and data protection laws and regulations could lead to government enforcement actions (which could include civil or criminal penalties), private litigation, and/or adverse publicity and could negatively affect our operating results and business.

We, our CROs, and any potential collaborators may be subject to strict and changing federal, state, and foreign data protection laws and regulations (i.e., laws and regulations that address privacy and data security) and policies and contractual obligations related to data privacy and security. In the U.S., numerous federal and state laws and regulations, including federal health information privacy laws, state data breach notification laws, state health information privacy laws, and federal and state consumer protection laws (e.g., Section 5 of the Federal Trade Commission Act), that govern the collection, use, disclosure and protection of health-related and other personal information could apply to our operations or the operations of our CROs and collaborators. In addition, we may obtain health information from third parties (including research institutions from which we obtain clinical trial data) that are subject to privacy and security requirements under HIPAA, as amended by HITECH. Depending on the facts and circumstances, we could be subject to civil, criminal, and administrative penalties if we knowingly obtain, use, or disclose individually identifiable health information maintained by a HIPAA-covered entity in a manner that is not authorized or permitted by HIPAA.

Compliance with U.S. and international data protection laws and regulations could require us to take on more onerous obligations in our contracts, restrict our ability to collect, use and disclose data, or in some cases, impact our ability to operate in certain jurisdictions. Failure to comply with these laws and regulations could result in government enforcement actions (which could include civil, criminal and administrative penalties), private litigation, and/or adverse publicity and could negatively affect our operating results and business. Moreover, clinical trial subjects, employees and other individuals about whom we or our potential collaborators obtain personal information, as well as the providers who share this information with us, may limit our ability to collect, use and disclose the information. Claims that we have violated individuals’ privacy rights, failed to comply with data protection laws, or breached our contractual obligations, even if we are not found liable, could be expensive and time-consuming to defend and could result in adverse publicity that could harm our business.

We have conducted our Phase 2 TOPAZ clinical trial of apitegromab in the European Economic Area (“EEA”), are conducting our Phase 3 SAPPHIRE clinical trial and ONYX, our long-term extension clinical trial of apitegromab, in the EEA and the UK, and may conduct future clinical trials in the EEA or the UK and therefore may be subject to additional privacy laws. The EU GDPR imposes a broad range of strict requirements on companies subject to the GDPR, including requirements relating to having legal bases for processing personal information relating to identifiable individuals and transferring such information outside the EEA or the UK, including to the U.S., providing details to those individuals regarding the processing of their personal information, keeping personal information secure, having data processing agreements with third parties who process personal information, responding to individuals’ requests to exercise their rights in respect of their personal information, where required reporting security breaches involving personal data to the competent national data protection authority and affected individuals, where required, appointing data protection officers, where required conducting data protection impact assessments, and record-keeping. The EU GDPR imposes penalties in the event of non-compliance, including fines of up to 10,000,000 Euros or up to 2% of our total worldwide annual turnover for certain comparatively minor offenses, or up to 20,000,000 Euros or up to 4% of our total worldwide annual turnover for more serious offenses. The EU GDPR also confers a private right of action on data subjects and consumer associations to lodge complaints with supervisory authorities, seek judicial remedies, and obtain compensation for damages resulting from violations of the EU GDPR.

Further to the UK’s exit from the EU on January 31, 2020, the EU GDPR ceased to apply in the UK but the UK incorporated the EU GDPR (as it existed on December 31, 2020 but subject to certain UK specific amendments) into UK law, referred to as the UK GDPR. The UK GDPR and the UK Data Protection Act 2018 set out the UK’s data protection regime, which is independent from but currently still aligned to the EU’s data protection regime. Non-compliance with the UK GDPR may result in monetary penalties of up to £17.5 million or 4% of worldwide revenue, whichever is higher.

Table of Contents

Although the UK is regarded as a third country under the EU’s GDPR, the UK is recognized as providing adequate protection under the EU GDPR (“UK Adequacy Decision”) and, therefore, transfers of personal data originating in the EU to the UK remain unrestricted. Likewise, personal data transfers from the UK to the EEA remain free flowing. The UK Government has introduced a Data Protection and Digital Information Bill (“UK Bill”) into the UK legislative process. The aim of the UK Bill is to reform the UK’s data protection regime following Brexit. If passed, the final version of the UK Bill may have the effect of further altering the similarities between the UK and EEA data protection regime and threaten the UK Adequacy Decision from the European Commission. This may lead to additional compliance costs and could increase our overall risk. The respective provisions and enforcement of the EU GDPR and UK GDPR may further diverge in the future and create additional regulatory challenges and uncertainties.

Adequate safeguards must be implemented to enable the transfer of personal data outside of the EEA or the UK in compliance with European and UK data protection laws. On June 4, 2021, the European Commission (EC) issued new forms of standard contractual clauses (“SCCs”) for data transfers from controllers or processors in the EEA (or otherwise subject to the EU GDPR) to controllers or processors established outside the EEA (and not subject to the EU GDPR). The new SCCs replace the SCCs that were adopted previously under the Data Protection Directive. The UK is not subject to the EC’s new SCCs but has published its own standard clauses, the International Data Transfer Agreement, which enables transfers from the UK. We will be required to implement these new safeguards when conducting restricted data transfers under the EU GDPR and UK GDPR and doing so will require significant effort and cost. Where relying on the SCCs or UK IDTA for data transfers, we may also be required to carry out transfer impact assessments to assess whether the recipient is subject to local laws which allow public authority access to personal data.

In July 2023, the European Commission adopted its adequacy decision for the EU-U.S. Data Privacy Framework (“Framework”), the successor of the EU-U.S. Privacy Shield framework, which the Court of Justice of the European Union invalidated in 2020. On the basis of the new adequacy decision, personal data can flow safely from the EU to U.S. companies participating in the Framework, without having to put in place additional data protection safeguards. However, the long term validity of the Framework, which has already been challenged in court, remains uncertain.

The EU GDPR and UK GDPR may increase our responsibility and liability in relation to personal data that we process where such processing is subject to the EU GDPR and UK GDPR, and we may be required to put in place additional mechanisms to ensure compliance with the EU GDPR and UK GDPR, including as implemented by individual countries. Given the new law, we face uncertainty as to the exact interpretation of the new requirements and we may be unsuccessful in implementing all measures required by data protection authorities or courts in interpretation of the law. Compliance with the EU GDPR and UK GDPR will be a rigorous and time-intensive process that may increase our cost of doing business or require us to change our business practices, and despite those efforts, there is a risk that we may be subject to fines and penalties, litigation, and reputational harm in connection with our European activities.

EU Member States have adopted implementing national laws to implement the EU GDPR which may partially deviate from the EU GDPR and the competent authorities in the EU Member States may interpret EU GDPR obligations slightly differently from country to country, so that we do not expect to operate in a uniform legal landscape in the EU. Also, as it relates to processing and transfer of genetic data, the EU GDPR specifically allows national laws to impose additional and more specific requirements or restrictions, and European laws have historically differed quite substantially in this field, leading to additional uncertainty.

We expect that we will continue to face uncertainty as to whether our efforts to comply with our obligations under European privacy laws will be sufficient. If we are investigated by a European or UK data protection authority, we may face fines and other penalties. Any such investigation or charges by European or UK data protection authorities could have a negative effect on our existing business and on our ability to attract and retain new clients or pharmaceutical partners. We may also experience hesitancy, reluctance, or refusal by European or multi-national clients or pharmaceutical partners to continue to use our products and solutions due to the potential risk exposure as a result of the current (and, in particular, future) data protection obligations imposed on them by certain data protection authorities in interpretation of current law, including the EU GDPR and UK GDPR. Such clients or pharmaceutical partners may also view any alternative approaches to compliance as being too costly, too burdensome, too legally uncertain, or otherwise objectionable and therefore decide not to do business with us. Any of the foregoing could materially harm our business, prospects, financial condition and results of operations.

Table of Contents

In addition, many states in which we operate have laws that protect the privacy and security of sensitive and personal information. Certain state laws may be more stringent or broader in scope, or offer greater individual rights, with respect to sensitive and personal information than federal, international or other state laws, and such laws may differ from each other, which may complicate compliance efforts. Where state laws are more protective than HIPAA, we must comply with the state laws we are subject to, in addition to HIPAA. In certain cases, it may be necessary to modify our planned operations and procedures to comply with these more stringent state laws. Further, in some cases where we process sensitive and personal information of individuals from numerous states, we may find it necessary to comply with the most stringent state laws applicable to any of the information. For example, California’s California Consumer Privacy Act (“CCPA”), creates comprehensive individual privacy rights for California consumers (as defined in the law) and places increased privacy and security obligations on entities handling personal data of consumers or households. While there are currently exceptions for protected health information that is subject to HIPAA and clinical trial regulations, as currently written, the CCPA, as amended by the California Privacy Rights Act (“CPRA”), and other enacted or proposed comprehensive state consumer privacy legislation may impact our business activities. We continue to monitor the impact that the state consumer privacy and protection laws, like the CCPA, may have on our business activities. See the section in this Annual Report on Form 10-K for the fiscal year ended December 31, 2023 entitled “Business – Government Regulation – European General Data Protection Regulation and “Business – Government Regulation – Other Healthcare and Privacy Laws.”

Artificial intelligence presents risks and challenges that can impact our business including by posing security risks to our confidential information, proprietary information, and personal data.

The potential use of new and evolving technologies, such as artificial intelligence, in our offerings to employees may result in additional spending and presents risks and challenges that can impact our business including by posing security and other risks to our confidential information, proprietary information and personal information, and as a result we may be exposed to reputational harm and liability.

We may build and integrate artificial intelligence into our offerings, and this innovation may present risks and challenges that could affect its adoption, and therefore our business. If we enable or offer solutions that draw controversy due to perceived or actual negative societal impact, we may experience brand or reputational harm, competitive harm or legal liability. The use of certain artificial intelligence technology can give rise to intellectual property risks, including compromises to proprietary intellectual property and intellectual property infringement. Additionally, we expect to see increasing government and supranational regulation related to artificial intelligence use and ethics, which may also significantly increase the burden and cost of research, development and compliance in this area. For example, the EU’s Artificial Intelligence Act (“AI Act”) — the world’s first comprehensive AI law — is anticipated to enter into force in Spring 2024 and, with some exceptions, become effective 24 months thereafter. This legislation imposes significant obligations on providers and deployers of high risk artificial intelligence systems, and encourages providers and deployers of artificial intelligence systems to account for EU ethical principles in their development and use of these systems. If we develop or use AI systems that are governed by the AI Act, it may necessitate ensuring higher standards of data quality, transparency, and human oversight, as well as adhering to specific and potentially burdensome and costly ethical, accountability, and administrative requirements. The rapid evolution of artificial intelligence will require the application of significant resources to design, develop, test and maintain our service offerings to help ensure that artificial intelligence is implemented in accordance with applicable law and regulation and in a socially responsible manner and to minimize any real or perceived unintended harmful impacts. Our vendors may in turn incorporate artificial intelligence tools into their own offerings, and the providers of these artificial intelligence tools may not meet existing or rapidly evolving regulatory or industry standards, including with respect to privacy and data security. Further, bad actors around the world use increasingly sophisticated methods, including the use of artificial intelligence, to engage in illegal activities involving the theft and misuse of personal information, confidential information and intellectual property. Any of these effects could damage our reputation, result in the loss of valuable property and information, cause us to breach applicable laws and regulations, and adversely impact our business.

Table of Contents

Additional laws and regulations governing international operations, including certain U.S. and foreign anti-corruption, anti-money laundering, export control, sanctions, and other trade laws and regulations, could negatively impact or restrict our operations.

If we further expand our operations outside of the U.S., we must dedicate additional resources to comply with numerous laws and regulations in each jurisdiction in which we plan to operate. The Foreign Corrupt Practices Act (“FCPA”) prohibits any U.S. individual or business from paying, offering, authorizing payment or offering of anything of value, directly or indirectly, to any foreign official, political party or candidate for the purpose of influencing any act or decision of the foreign entity in order to assist the individual or business in obtaining or retaining business. The FCPA also obligates companies whose securities are listed in the U.S. to comply with certain accounting provisions requiring the company to maintain books and records that accurately and fairly reflect all transactions of the corporation, including international subsidiaries, and to devise and maintain an adequate system of internal accounting controls for international operations.

Compliance with the FCPA is expensive and difficult, particularly in countries in which corruption is a recognized problem. In addition, the FCPA presents particular challenges in the pharmaceutical industry, because, in many countries, hospitals are operated by the government, and doctors and other hospital employees are considered foreign officials. Certain payments to hospitals in connection with clinical trials and other work have been deemed to be improper payments to government officials and have led to FCPA enforcement actions.

Various laws, regulations and executive orders also restrict the use and dissemination outside of the U.S., or the sharing with certain non-U.S. nationals, of information classified for national security purposes, as well as certain products and technical data relating to those products. If we expand our presence outside of the U.S., it will require us to dedicate additional resources to comply with these laws, and these laws may preclude us from developing, manufacturing, or selling certain products and product candidates outside of the U.S., which could limit our growth potential and increase our development costs.

The failure to comply with laws governing international business practices may result in substantial civil and criminal penalties and suspension or debarment from government contracting. The SEC also may suspend or bar issuers from trading securities on U.S. exchanges for violations of the FCPA’s accounting provisions.

If we fail to comply with environmental, health and safety laws and regulations, we could become subject to fines or penalties or incur costs that could have a material adverse effect on the success of our business.

We are subject to numerous environmental, health and safety laws and regulations, including those governing laboratory procedures and the handling, use, storage, treatment and disposal of hazardous materials and wastes. Our research and development activities involve the use of biological and hazardous materials and produce hazardous waste products. We generally contract with third parties for the disposal of these materials and wastes. We cannot eliminate the risk of contamination or injury from these materials, which could cause an interruption of our commercialization efforts, research and development efforts and business operations, environmental damage resulting in costly clean-up and liabilities under applicable laws and regulations governing the use, storage, handling and disposal of these materials and specified waste products. Although we believe that the safety procedures utilized by our third-party manufacturers for handling and disposing of these materials generally comply with the standards prescribed by these laws and regulations, we cannot guarantee that this is the case or eliminate the risk of accidental contamination or injury from these materials. In such an event, we may be held liable for any resulting damages and such liability could exceed our resources and state or federal or other applicable authorities may curtail our use of certain materials and/or interrupt our business operations. Furthermore, environmental laws and regulations are complex, change frequently and have tended to become more stringent. We cannot predict the impact of such changes and cannot be certain of our future compliance. In addition, we may incur substantial costs in order to comply with current or future environmental, health and safety laws and regulations. These current or future laws and regulations may impair our research, development or production efforts. Failure to comply with these laws and regulations also may result in substantial fines, penalties or other sanctions.

Although we maintain workers’ compensation insurance to cover us for costs and expenses we may incur due to injuries to our employees resulting from the use of hazardous materials or other work-related injuries, this insurance may not

Table of Contents

provide adequate coverage against potential liabilities, and as a result, may be subject to lengthy and expensive litigation and excessive damages and we may not have, or be able to obtain, sufficient capital to pay such amounts. We do not carry specific biological waste or hazardous waste insurance coverage, workers compensation or property and casualty and general liability insurance policies that include coverage for damages and fines arising from biological or hazardous waste exposure or contamination.

If product liability lawsuits are brought against us, we may incur substantial liabilities and may be required to limit commercialization of our product candidates.

We face an inherent risk of product liability as a result of testing apitegromab, SRK-181, SRK-439 and any of our future product candidates in clinical trials and will face an even greater risk if we commercialize any products, if approved. For example, we may be sued if our product candidates cause or are perceived to cause injury or are found to be otherwise unsuitable during clinical trials, manufacturing, marketing or sale. Any such product liability claims may include allegations of defects in manufacturing, defects in design, a failure to warn of dangers inherent in the product, negligence, strict liability or a breach of warranties. Claims could also be asserted under state consumer protection acts. If we cannot successfully defend ourselves against product liability claims, we may incur substantial liabilities or be required to limit commercialization of our product candidates. Even successful defense would require significant financial and management resources. Regardless of the merits or eventual outcome, liability claims may result in:

● inability to bring a product candidate to the market;

● decreased demand for our products;

● injury to our reputation;

● initiation of investigations by regulators;

● costs to defend the related litigation;

● diversion of management’s time and our resources;

● substantial monetary awards to trial participants;

● loss of revenue;

● exhaustion of any available insurance and our capital resources;

● the inability to commercialize any product candidate, if approved; and

● decline in our share price.

Our inability to obtain sufficient product liability insurance at an acceptable cost to protect against potential product liability claims could prevent or inhibit the commercialization of products we develop, alone or with collaborators. We may be unable to obtain, or may obtain on unfavorable terms, additional clinical trial insurance in amounts adequate to cover any liabilities from any of our clinical trials. Our insurance policies may also have various exclusions, and we may be subject to a product liability claim for which we have no coverage. We may have to pay any amounts awarded by a court or negotiated in a settlement that exceed our coverage limitations or that are not covered by our insurance, and we may not have, or be able to obtain, sufficient capital to pay such amounts. Even if our agreements with any future

Table of Contents

corporate collaborators entitle us to indemnification against losses, such indemnification may not be available or adequate should any claim arise.

Inadequate funding for the FDA, the SEC and other government agencies, including from government shut downs, or other disruptions to these agencies’ operations, could prevent new products and services from being developed or commercialized in a timely manner or otherwise prevent those agencies from performing normal business functions on which the operation of our business may rely, which could negatively impact our business.

The ability of the FDA to review and approve new products can be affected by a variety of factors, including government budget and funding levels and statutory, regulatory, and policy changes. Average review times at the agency have fluctuated in recent years as a result. In addition, government funding of other agencies on which our operations may rely, including those that fund research and development activities, is subject to the political process, which is inherently fluid and unpredictable.

If a prolonged government shutdown or other disruption occurs, it could significantly impact the ability of the FDA to timely review and process our regulatory submissions, which could have a material adverse effect on our business. Future shutdowns or other disruptions could also affect other government agencies such as the SEC, which may also impact our business by delaying review of our public filings, to the extent such review is necessary, and our ability to access the public markets.

Our current laboratory operations are concentrated in one location, and we or the third parties upon whom we depend, including our clinical trial sites and the manufacturing facilities of our third-party contract manufacturers, may experience business interruptions and our business continuity and disaster recovery plans may not adequately protect us from a serious disaster, including earthquakes, outbreak of disease or other natural disasters.

Our office and laboratory facilities are located in Cambridge, Massachusetts. Any unplanned event, such as flood, fire, explosion, earthquake, extreme weather condition, medical epidemics, power shortage, telecommunication failure or other natural or manmade accidents or incidents that result in us being unable to fully utilize our facilities, the facilities at any clinical trial site, or the manufacturing facilities of our third-party contract manufacturers, may have a material and adverse effect on our ability to operate our business, particularly on a daily basis, and have significant negative consequences on our financial and operating conditions. Loss of access to these facilities may result in increased costs, delays in the development of apitegromab, SRK-181, SRK-439 and future product candidates or interruption of our business operations. If a natural disaster, outbreak of disease, power outage or other event occurred that prevented us from using all or a significant portion of our headquarters, that damaged critical infrastructure, such as our research facilities, our clinical trial sites or the manufacturing facilities of our third-party contract manufacturers, or that otherwise disrupted operations, it may be difficult or, in certain cases, impossible, for us to continue our business for a substantial period of time.

Global events, including global health concerns could also result in social, economic, and labor instability in the countries in which we operate or where the third parties with whom we engage, including our clinical trial sites and manufacturing facilities of our third-party contract manufacturers, operate. Unforeseen global events, such as increasing inflation and interest, could adversely impact our business. For example, we are conducting SAPPHIRE, our Phase 3 clinical trial and, ONYX, our long-term extension clinical trial of apitegromab in the U.S. and EU, and regional instability caused by the 2022 Russian invasion of Ukraine could adversely affect the conduct of our clinical trials. Such conflicts could lead to sanctions, embargoes, supply shortages, regional instability, geopolitical shifts, cyberattacks, other retaliatory actions, and adverse effects on macroeconomic conditions, currency exchange rates, and financial markets, which could adversely impact our operations and financial results, as well as those of third parties with whom we conduct business.

The disaster recovery and business continuity plans we have in place may prove inadequate in the event of a serious disaster or similar event. We may incur substantial expenses as a result of the limited nature of our disaster recovery and business continuity plans, which could have a material adverse effect on our business. As part of our risk management policy, we maintain insurance coverage at levels that we believe are appropriate for our business. However, in the event of an accident or incident at our facilities, we cannot assure you that the amounts of insurance will be sufficient to satisfy

Table of Contents

any damages and losses. If our facilities, the manufacturing facilities of our third-party contract manufacturers, or the sites where we conduct clinical trials or preclinical studies, are unable to operate because of an accident or incident or for any other reason, even for a short period of time, our research and development programs may be harmed. Any business interruption may have a material and adverse effect on our business, financial condition, results of operations and prospects.

Coverage and reimbursement may be limited or unavailable in certain market segments for our product candidates, if approved, which could make it difficult for us to sell any product candidates profitably.

The success of our product candidates, apitegromab and SRK-181, and future product candidates such as SRK-439, if approved, depends on the availability of coverage and adequate reimbursement from third-party payors. We cannot be sure that coverage and reimbursement will be available for, or accurately estimate the potential revenue from, apitegromab, SRK-181, SRK-439 or future product candidates or assure that coverage and reimbursement will be available for any product that we may develop.See the sections in this Annual Report on Form 10-K for the fiscal year ended December 31, 2023 entitled “Business– Government Regulation – Coverage and Reimbursement” and “Business–Government Regulation–Current and Future Healthcare Reform Legislation.”

Patients who are provided medical treatment for their conditions generally rely on third-party payors to reimburse all or part of the costs associated with their treatment. Coverage and adequate reimbursement from governmental healthcare programs, such as Medicare and Medicaid or national payor bodies (such as in European countries), and commercial payors is critical to new product acceptance.

Government authorities and other third-party payors, such as private health insurers and health maintenance organizations, decide which drugs and treatments they will cover and the amount of reimbursement. Coverage and reimbursement by a third-party payor may depend upon a number of factors, including the third-party payor’s determination that use of a product is:

● a covered benefit under its health plan;

● safe, effective and medically necessary;

● appropriate for the specific patient;

● cost-effective; and

● neither experimental nor investigational.

In the U.S., no uniform policy of coverage and reimbursement for products existsamong third party payors, Coverage and reimbursement for products can differ significantly from payor to payor. One payor’s decision to cover a particular medical product or service does not ensure that other payors will also provide coverage for the medical product or service, or will provide coverage at an adequate reimbursement rate. Coverage and reimbursement for products may vary widely across national payors from country to country.

Payors are increasingly challenging the price and examining the medical necessity and cost-effectiveness of medical products and services, in addition to their safety and efficacy. In order to obtain and maintain coverage and reimbursement for any product, we may need to conduct expensive evidence generation studies in order to demonstrate the medical necessity and cost-effectiveness of such a product, in addition to the costs required to obtain regulatory approvals. If payors do not consider a product to be cost-effective compared to current standards of care, they may not cover the product as a benefit under their plans or, if they do, the level of payment may not be sufficient to allow a company to cover its costs or make a profit. Even if we obtain coverage for a given product, the resulting reimbursement payment rates might not be adequate for us to achieve or sustain profitability or may require co-payments that patients find unacceptably high. Additionally, third-party payors may not cover, or provide adequate reimbursement for, long-term follow-up evaluations required following the use of product candidates. Patients are unlikely to use our product

Table of Contents

candidates unless coverage is provided and reimbursement is adequate to cover a significant portion of the cost of our product candidates. There is significant uncertainty related to insurance coverage and reimbursement of newly approved products. It is difficult to predict at this time what third-party payors will decide with respect to the coverage and reimbursement for our product candidates.

Payment methodologies may be subject to changes in healthcare legislation and regulatory initiatives. Additional state and federal healthcare reform measures are expected to be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services, which could result in reduced demand for certain pharmaceutical products or additional pricing pressures.

Moreover, increasing efforts by governmental and third-party payors in the U.S. and abroad to cap or reduce healthcare costs may cause such organizations to limit both coverage and the level of reimbursement for newly approved products and, as a result, they may not cover or provide adequate payment for our product candidates. There has been increasing legislative and enforcement interest in the U.S. with respect to specialty drug pricing practices. Specifically, there have been several recent U.S. Congressional inquiries and proposed and enacted federal and state legislation designed to, among other things, bring more transparency to drug pricing, reduce the cost of prescription drugs under Medicare, review the relationship between pricing and manufacturer patient programs, and reform government program reimbursement methodologies for drugs. We expect to experience pricing pressures in connection with the sale of any of our product candidates due to the trend toward managed healthcare, the increasing influence of health maintenance organizations, cost containment initiatives and additional legislative changes.

EU drug marketing and reimbursement regulations may materially affect our ability to market and receive coverage for our products in the European Member States.

We intend to seek approval to market our product candidates in both the U.S. and in selected foreign jurisdictions. If we receive approval in one or more foreign jurisdictions for apitegromab, SRK-181, SRK-439 or future product candidates, we will be subject to rules and regulations in those jurisdictions. In some foreign countries, particularly those in the EU, the pricing of medicinal products is subject to governmental control and other market regulations which could put pressure on the pricing and usage of our product candidates. In these countries, pricing negotiations with governmental authorities can take considerable time after receiving marketing approval of a product candidate. In addition, market acceptance and sales of our product candidates will depend significantly on the availability of adequate coverage and reimbursement from third-party payors for our product candidates and may be affected by existing and future health care reform measures.

Much like the federal Anti-Kickback Statute prohibition in the U.S., the provision of benefits or advantages to physicians to induce or encourage the prescription, recommendation, endorsement, purchase, supply, order or use of medicinal products is also prohibited in the EU. The provision of benefits or advantages to physicians is governed by the national anti-inducement, advertising and anti-bribery laws of EU Member States. Infringement of these laws could result in substantial fines and imprisonment.

Payments made to physicians in certain EU Member States must be disclosed publicly. Moreover, agreements with physicians often must be the subject of prior notification and approval by the physician’s employer, his or her competent professional organization and/or the regulatory authorities of the individual EU Member States. These requirements are provided in the national laws, industry codes or professional codes of conduct, applicable in the EU Member States. EU Directive 2001/83/EC, which is the EU Directive governing medicinal products for human use, further provides that where medicinal products are being promoted to persons qualified to prescribe or supply them, no gifts, pecuniary advantages or benefits in kind may be supplied, offered or promised to such persons unless they are inexpensive and relevant to the practice of medicine or pharmacy. Failure to comply with these requirements could result in reputational risk, public reprimands, administrative penalties, fines or imprisonment.

In addition, in most foreign countries, including several EU Member States, the proposed pricing for a drug must be approved before it may be lawfully marketed. The requirements governing drug pricing and reimbursement vary widely from country to country. For example, the EU provides options for its Member States to restrict the range of medicinal products for which their national health insurance systems provide reimbursement and to control the prices of medicinal

Table of Contents

products for human use. Reference pricing used by various EU Member States and parallel distribution, or arbitrage between low-priced and high-priced Member States, can further reduce prices. A Member State may approve a specific price for the medicinal product or it may instead adopt a system of direct or indirect controls on the profitability of the company placing the medicinal product on the market. In some countries, we may be required to conduct a clinical study or other studies that compare the cost-effectiveness of any of our product candidates to other available therapies in order to obtain or maintain reimbursement or pricing approval. There can be no assurance that any country that has price controls or reimbursement limitations for pharmaceutical products will allow favorable reimbursement and pricing arrangements for any of our products. Historically, products launched in the EU do not follow price structures of the U.S. and generally prices tend to be significantly lower. Publication of discounts by third-party payors or authorities may lead to further pressure on the prices or reimbursement levels within the country of publication and other countries. If pricing is set at unsatisfactory levels or if reimbursement of our products is unavailable or limited in scope or amount, our revenues from sales by us or our strategic partners and the potential profitability of any of our product candidates in those countries would be negatively affected.

We may seek to enter into collaborations in the future with third parties, including for apitegromab, SRK-181, SRK-439 or potential product candidates. If we are unable to enter into such collaborations, or if these collaborations are not successful, our business could be adversely affected.

A part of our strategy is to evaluate and, as deemed appropriate, enter into additional collaborations or partnerships in the future when strategically attractive, including potentially with biotechnology or pharmaceutical companies. We have limited capabilities for product development and only recently have begun to build our capabilities to prepare for potential commercialization. Accordingly, we may enter into collaborations with other companies to provide us with important technologies, capabilities and funding for our programs and underlying technology.

Any future collaboration we enter into may pose a number of risks, including the following:

Table of Contents

If our future collaborations do not result in the successful discovery, development and commercialization of product candidates or if one of our collaborators terminates its agreement with us, we may not receive any future research funding or milestone or royalty payments under such collaboration. All of the risks relating to product development, regulatory approval and commercialization described in this Annual Report on Form 10-K also apply to the activities of potential therapeutic collaborators.

Additionally, if one of our collaborators terminates its agreement with us, we may find it more difficult to attract new collaborators and our perception in the biotechnology or pharmaceutical industry, including within the business and financial communities, could be adversely affected.

We face significant competition in seeking appropriate partners for our product candidates, and the negotiation process is time-consuming and complex. In order for us to successfully partner our product candidates, potential partners must view these product candidates as economically valuable in markets they determine to be attractive in light of the terms that we are seeking and other available products for licensing by other companies. Collaborations are complex and time-consuming to negotiate and document. In addition, there have been a significant number of recent business combinations among large pharmaceutical companies that have resulted in a reduced number of potential future collaborators. Our ability to reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed collaborator’s evaluation of a number of factors. If we are unable to reach agreements with suitable collaborators on a timely basis, on acceptable terms, or at all, we may have to curtail the development of a product candidate, reduce or delay its development program or one or more of our other development programs, delay its potential commercialization or reduce the scope of any sales or marketing activities, or increase our expenditures and undertake development or commercialization activities at our own expense. If we elect to increase our expenditures to fund development or commercialization activities on our own, we may need to obtain additional expertise and additional capital, which may not be available to us on acceptable terms, or at all. If we fail to enter into collaborations or do not have sufficient funds

Table of Contents

or expertise to undertake the necessary development and commercialization activities, we may not be able to further develop our product candidates, bring them to market and generate revenue from sales of drugs or continue to develop our technology, and our business may be materially and adversely affected. Even if we are successful in our efforts to establish new strategic collaborations, the terms that we agree upon may not be favorable to us, and we may not be able to maintain such strategic collaborations if, for example, development or approval of a product candidate is delayed or sales of an approved product are disappointing. Any delay in entering into new strategic collaboration agreements related to our product candidates could delay the development and commercialization of our product candidates and reduce their competitiveness even if they reach the market.

Risks Related to Our Intellectual Property

Our success depends in part on our ability to protect our intellectual property. It is difficult and costly to protect our proprietary rights and technology, and we may not be able to ensure their protection.

Our commercial success will depend in large part on obtaining and maintaining patent, trademark and trade secret protection of our proprietary technologies and our product candidates, their respective components, formulations, combination therapies, methods used to manufacture them and methods of treatment, as well as successfully defending these patents against third-party challenges. Our ability to stop unauthorized third parties from making, using, selling, offering to sell or importing our product candidates is dependent upon the extent to which we have rights under valid and enforceable patents that cover these activities. If we are unable to secure and maintain patent protection for any product or technology we develop, or if the scope of the patent protection secured is not sufficiently broad, our competitors could develop and commercialize products and technology similar or identical to ours, and our ability to commercialize any product candidates we may develop may be adversely affected.

The patenting process is expensive and time-consuming, and we may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. In addition, we may not pursue or obtain patent protection in all relevant markets. Unforeseen global events, and sanctions or actions relating to such events, could affect our ability to file, prosecute, maintain, and/or defend patents and applications in those markets. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection. Moreover, in some circumstances, we may not have the right to control the preparation, filing and prosecution of patent applications, or to maintain the patents, covering technology that we license from or license to third parties and are reliant on our licensors or licensees.

The strength of patents in the biotechnology and pharmaceutical field involves complex legal and scientific questions and can be uncertain. The patent applications that we own or in-license may fail to result in issued patents with claims that cover our product candidates or uses thereof in the U.S. and/or in other foreign countries. Even if the patents do successfully issue, third parties may challenge the validity, enforceability or scope thereof, which may result in such patents being narrowed, invalidated or held unenforceable. For example, Russia issued a decree in March of 2022, stating that patent owners who reside in a country “unfriendly” to Russia are not entitled to compensation in the event of patent infringement. Furthermore, even if they are unchallenged, our patents and patent applications may not adequately protect our intellectual property and/or prevent others from designing around our claims. If the breadth or strength of protection provided by the patent applications we hold with respect to our product candidates is threatened, it could dissuade companies from collaborating with us to develop, and threaten our ability to commercialize, our product candidates. Further, if we encounter delays in our clinical trials, the period of time during which we could market our product candidates under patent protection would be reduced.

We cannot be certain that we are the first to invent the inventions covered by pending patent applications and, if we are not, we may be subject to priority disputes. We may be required to disclaim part or all of the term of certain patents or all of the term of certain patent applications. There may be prior art of which we are not aware that may affect the validity or enforceability of a patent claim. There also may be prior art of which we are aware, but which we do not believe affects the validity or enforceability of a claim, which may, nonetheless, ultimately be found to affect the validity or enforceability of a claim. No assurance can be given that if challenged, our patents would be declared by a court to be valid or enforceable or that even if found valid and enforceable, a competitor’s technology or product would be found by a court to infringe our patents. We may analyze patents or patent applications of our competitors that we believe are

Table of Contents

relevant to our activities, and consider that we are free to operate in relation to our product candidates, but our competitors may achieve issued claims, including in patents we consider to be unrelated, which block our efforts or may potentially result in our product candidates or our activities infringing such claims. The possibility exists that others will develop products which have the same effect as our products on an independent basis which do not infringe our patents or other intellectual property rights, or will design around the claims of patents that we have had issued that cover our products.

In addition, periodic maintenance fees on any issued patent are due to be paid to the U.S. Patent Office (“USPTO”) and foreign patent agencies in several stages over the lifetime of the patent. The USPTO and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other provisions during the patent application process and following the issuance of a patent. While an inadvertent lapse can, in many cases, be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Noncompliance events that could result in abandonment or lapse of a patent or patent application include, but are not limited to, failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents. Moreover, complications due to global pandemics may result in inadvertent lapse due to, for example, unexpected closures of the USPTO or foreign patent offices, delays in delivery of notifications relating to deadlines, or failure to timely and/or properly obtain signatures on necessary documents. Additionally, due to the ongoing conflict in Ukraine, there remain uncertainties as to any potential impact on patent protection and/or enforcement in the region, including, for example, payments to the Russian Patent Office and other entities. In such an event, our competitors might be able to enter the market, which would have a material adverse effect on our business.

The degree of future protection for our proprietary rights is uncertain because legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep our competitive advantage. For example:

Table of Contents

● it is possible that others may circumvent our owned or in-licensed patents;

● the patents of others may have an adverse effect on our business.

Our current patents covering our proprietary technologies and our product candidates are expected to expire beginning in 2034, without taking into account any possible patent term adjustments or extensions. Our earliest patents may expire before, or soon after, our first product achieves marketing approval in the U.S. or foreign jurisdictions. Upon the expiration of our current patents, we may lose the right to exclude others from practicing these inventions. The expiration of these patents could also have a material adverse effect on our business, results of operations, financial condition and prospects. We own pending patent applications covering our proprietary technologies or our product candidates that if issued as patents are expected to expire from 2034 through 2045, without taking into account any possible patent term adjustments or extensions. However, we cannot be assured that the USPTO or relevant foreign patent offices will grant any of these patent applications.

We depend on intellectual property licensed from third parties. Failure to comply with our obligations under any of these licenses or termination of any of these licenses could result in the loss of significant rights, which would harm our business.

We are dependent on patents, know-how and proprietary technology, including intellectual property rights licensed from others. We may be a party to license agreements pursuant to which we in-license key patents and patent applications for our product candidates. These licenses impose various diligence, milestone payment, royalty, insurance and other obligations on us. If we fail to comply with these obligations, our licensors may have the right to terminate the license. Any termination of licenses by third parties could result in our loss of significant intellectual property rights and could harm our ability to commercialize our product candidates.

We may have limited control over the maintenance and prosecution of these in-licensed patents and patent applications, activities or any other intellectual property that may be related to our in-licensed intellectual property. For example, we cannot be certain that such activities by these licensors have been or will be conducted in compliance with applicable laws and regulations or will result in valid and enforceable patents and other intellectual property rights. We may have

Table of Contents

limited control over the manner in which our licensors initiate an infringement proceeding against a third-party infringer of the intellectual property rights, or defend certain of the intellectual property that is licensed to us. It is possible that the licensors’ infringement proceeding or defense activities may be less vigorous than had we conducted them ourselves.

Disputes may also arise between us and our licensors regarding intellectual property subject to a license agreement, including:

If disputes over intellectual property that we have licensed prevent or impair our ability to maintain our current licensing arrangements on acceptable terms, we may be unable to successfully develop and commercialize the affected product candidates.

We may not be successful in obtaining or maintaining necessary rights to develop any future product candidates on acceptable terms.

Because our programs may involve additional product candidates that may require the use of additional proprietary rights held by third parties, the growth of our business may depend in part on our ability to acquire, in-license or use these proprietary rights.

Our product candidates may also require specific formulations to work effectively and efficiently, and these rights may be held by others. We may develop products containing our compounds and pre-existing pharmaceutical compounds. We may be required by the FDA or comparable foreign regulatory authorities to provide a companion diagnostic test or tests with our product candidates. These diagnostic test or tests may be covered by intellectual property rights held by others. We may be unable to acquire or in-license any compositions, methods of use, processes or other third-party intellectual property rights from third parties that we identify as necessary or important to our business operations. We may fail to obtain any of these licenses at a reasonable cost or on reasonable terms, if at all, which would harm our business. We may need to cease use of the compositions or methods covered by such third-party intellectual property rights, and may need to seek to develop alternative approaches that do not infringe on such intellectual property rights which may entail additional costs and development delays, even if we were able to develop such alternatives, which may not be feasible. Even if we are able to obtain a license, it may be non-exclusive, thereby giving our competitors access to the same technologies licensed to us. In that event, we may be required to expend significant time and resources to develop or license replacement technology.

Additionally, we sometimes collaborate with academic institutions to accelerate our preclinical research or development under written agreements with these institutions. In certain cases, these institutions provide us with an option to negotiate a license to any of the institution’s rights in technology resulting from the collaboration. Regardless of such option, we may be unable to negotiate a license within the specified timeframe or under terms that are acceptable to us. If we are unable to do so, the institution may offer the intellectual property rights to others, potentially blocking our ability to pursue our program. If we are unable to successfully obtain rights to required third-party intellectual property or to maintain the existing intellectual property rights we have, we may have to abandon development of such program and our business and financial condition could suffer.

The licensing or acquisition of third-party intellectual property rights is a competitive area, and companies, which may be more established, or have greater resources than we do, may also be pursuing strategies to license or acquire third-

Table of Contents

party intellectual property rights that we may consider necessary or attractive in order to commercialize our product candidates. More established companies may have a competitive advantage over us due to their size, cash resources and greater clinical development and commercialization capabilities. There can be no assurance that we will be able to successfully complete such negotiations and ultimately acquire the rights to the intellectual property surrounding the additional product candidates that we may seek to acquire.

Changes in patent law in the U.S. and in ex-U.S. jurisdictions could diminish the value of patents in general, thereby impairing our ability to protect our products.

As is the case with other biopharmaceutical companies, our success is heavily dependent on intellectual property, particularly patents. Obtaining and enforcing patents in the biopharmaceutical industry involve both technological and legal complexity, and is therefore costly, time-consuming and inherently uncertain.

In addition, recent or future patent reform legislation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents. Under the enacted Leahy-Smith America Invents Act (the “America Invents Act”), enacted in 2013, the U.S. moved from a “first to invent” to a “first to file” system. Under a “first to file” system, assuming the other requirements for patentability are met, the first inventor to file a patent application generally will be entitled to a patent on the invention regardless of whether another inventor had made the invention earlier. The America Invents Act includes a number of other significant changes to U.S. patent law, including provisions that affect the way patent applications are prosecuted, redefine prior art and establish a new post-grant review system. The effects of these changes are currently unclear as the USPTO only recently developed new regulations and procedures in connection with the America Invents Act, and many of the substantive changes to patent law, including the “first to file” provisions, only became effective in March 2013. In addition, the courts have yet to address many of these provisions and the applicability of the act and new regulations on specific patents discussed herein have not been determined and would need to be reviewed. However, the America Invents Act and its implementation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents, all of which could have a material adverse effect on our business and financial condition.

Recent U.S. Supreme Court rulings have also narrowed the scope of patent protection available in certain circumstances and weakened the rights of patent owners in certain situations. In addition to increasing uncertainty with regard to our ability to obtain patents in the future, this combination of events has created uncertainty with respect to the value of patents, once obtained. As a consequence, issued patents may be found to contain invalid claims according to the newly revised eligibility and validity standards. Additionally, some of our owned or in-licensed patents may be subject to challenge and subsequent invalidation or significant narrowing of claim scope in proceedings before the USPTO, or during litigation, under the revised criteria which could also make it more difficult to obtain patents.

Depending on decisions by the U.S. Congress, the federal courts, and the USPTO, the laws and regulations governing patents could change in unpredictable ways that would weaken our ability to obtain new patents or to enforce our existing patents and patents that we might obtain in the future. For example, in the case Amgen Inc. v. Sanofi, the Federal Circuit held that a well characterized antigen is insufficient to satisfy the written description requirement of certain claims directed to a genus of antibodies that are solely defined by function. While the validity of a subset of patents at issue was subsequently upheld by a district court jury, uncertainty remains as to the legal question pertaining to the written description requirement under 35 USC §112 as it relates to functional antibodies. In the case of Assoc. for Molecular Pathology v. Myriad Genetics, Inc., the U.S. Supreme Court held that certain claims to DNA molecules are not patentable. We cannot predict how these decisions or any future decisions by the courts, the U.S. Congress or the USPTO may impact the value of our patents. Similarly, any adverse changes in the patent laws of other jurisdictions could have a material adverse effect on our business and financial condition. For example, Russia issued a decree in March of 2022, stating that patent owners who reside in a country “unfriendly” to Russia are not entitled to compensation in the event of patent infringement.

Table of Contents

Third-party claims of intellectual property infringement may prevent or delay our product discovery and development efforts.

Our commercial success depends in part on our ability to develop, manufacture, market and sell our product candidates and use our proprietary technologies without infringing the proprietary rights of third parties. There is a substantial amount of litigation involving patents and other intellectual property rights in the biotechnology and pharmaceutical industries, as well as administrative proceedings for challenging patents, including interference, derivation, inter partes review, post-grant review, and reexamination proceedings before the USPTO or oppositions and other comparable proceedings in foreign jurisdictions. We may be exposed to, or threatened with, future litigation by third parties having patent or other intellectual property rights alleging that our product candidates and/or proprietary technologies infringe their intellectual property rights. Numerous U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in the fields in which we are developing our product candidates. As the biotechnology and pharmaceutical industries expand and more patents are issued, the risk increases that our product candidates may give rise to claims of infringement of the patent rights of others. Moreover, it is not always clear to industry participants, including us, which patents cover various types of drugs, products or their methods of use or manufacture. Thus, because of the large number of patents issued and patent applications filed in our fields, there may be a risk that third parties may allege they have patent rights encompassing our product candidates, technologies or methods.

If a third-party claims that we infringe its intellectual property rights, we may face a number of issues, including, but not limited to:

Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations or could otherwise have a material adverse effect on our business, results of operations, financial condition and prospects.

Third parties may assert that we are employing their proprietary technology without authorization. Generally, conducting clinical trials and other development activities in the U.S. is protected under the Safe Harbor exemption as set forth in 35 U.S.C. § 271. If and when apitegromab, SRK-181, or another one of our product candidates is approved by the FDA, that certain third-party may then seek to enforce its patent by filing a patent infringement lawsuit against us. While we are not aware of any claims of such a patent that could otherwise materially adversely affect commercialization of our product candidates, we may be incorrect in this belief, or we may not be able to prove it in a litigation. In this regard, patents issued in the U.S. by law enjoy a presumption of validity that can be rebutted only with evidence that is “clear and convincing,” a heightened standard of proof. There may be third-party patents of which we are currently unaware with claims to materials, formulations, methods of manufacture or methods for treatment related to the use or manufacture of our product candidates. Because patent applications can take many years to issue, there may be currently

Table of Contents

pending patent applications which may later result in issued patents that our product candidates may infringe. In addition, third parties may obtain patents in the future and claim that use of our technologies infringes upon these patents. If any third-party patents were held by a court of competent jurisdiction to cover the manufacturing process of our product candidates, constructs or molecules used in or formed during the manufacturing process, or any final product itself, the holders of any such patents may be able to block our ability to commercialize the product candidate unless we obtained a license under the applicable patents, or until such patents expire or they are finally determined to be held invalid or unenforceable. Similarly, if any third-party patent were held by a court of competent jurisdiction to cover aspects of our formulations, processes for manufacture or methods of use, the holders of any such patent may be able to block our ability to develop and commercialize the product candidate unless we obtained a license or until such patent expires or is finally determined to be held invalid or unenforceable. In either case, such a license may not be available on commercially reasonable terms, or at all. If we are unable to obtain a necessary license to a third-party patent on commercially reasonable terms, or at all, our ability to commercialize our product candidates may be impaired or delayed, which could in turn significantly harm our business. Even if we obtain a license, it may be non-exclusive, thereby giving our competitors access to the same technologies licensed to us. In addition, if the breadth or strength of protection provided by our patents and patent applications is threatened, it could dissuade companies from collaborating with us to license, develop or commercialize current or future product candidates.

Parties making claims against us may seek and obtain injunctive or other equitable relief, which could effectively block our ability to further develop and commercialize our product candidates. Defense of these claims, regardless of their merit, would involve substantial litigation expense and would be a substantial diversion of employee resources from our business. In the event of a successful claim of infringement against us, we may have to pay substantial damages, including treble damages and attorneys’ fees for willful infringement, obtain one or more licenses from third parties, and/or pay royalties or redesign our infringing products, which may be impossible or require substantial time and monetary expenditure. We cannot predict whether any such license would be available at all or whether it would be available on commercially reasonable terms. Furthermore, even in the absence of litigation, we may need to obtain licenses from third parties to advance our research or allow commercialization of our product candidates. We may fail to obtain any of these licenses at a reasonable cost or on reasonable terms, if at all. In that event, we would be unable to further develop and commercialize our product candidates, which could harm our business significantly.

We may also choose to challenge the patentability of claims in a third-party’s U.S. patent by requesting that the USPTO review the patent claims in an ex-parte re-exam, inter partes review or post-grant review proceedings. These proceedings are expensive and may consume our time or other resources. We may choose to challenge the grant of a third-party’s patent in opposition proceedings in the European Patent Office (“EPO”) or other foreign patent office. The costs of these opposition proceedings could be substantial, and may consume our time or other resources. If we fail to obtain a favorable result at the USPTO, EPO or other patent office, then we may be exposed to litigation by a third-party alleging that the patent may be infringed by our product candidates or proprietary technologies.

Additionally, the Unified Patent/Unified Patent Court system in Europe became fully operational in June 2023.

We may incur substantial costs as a result of litigation or other proceedings relating to our patents or the patents of our licensors, and we may be unable to protect our rights to our products and technology.

Competitors may infringe our patents or the patents of our licensors. To counter infringement or unauthorized use, we may be required to file infringement claims against a third party(ies), which can be expensive and time-consuming. In addition, in an infringement proceeding, a court may decide that one or more of our patents is not valid or is unenforceable, or may refuse to stop the other party from using the technology at issue on the grounds that our patents do not cover the technology in question. There is also the risk that, even if the validity of our patents or the patents of our licensors is upheld, the court will refuse to stop the third-party on the ground that such third-party’s activities do not

Table of Contents

infringe our owned or in-licensed patents. An adverse result in any litigation or defense proceedings could put one or more of our patents at risk of being invalidated, held unenforceable, or interpreted narrowly and could put our patent applications at risk of not issuing. Defense of these claims, regardless of their merit, would involve substantial litigation expense and would be a substantial diversion of employee resources from our business.

Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments. If securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common stock.

In some situations, we or our licensor, may not be able to detect infringement against our owned or in-licensed patents, as the case may be, which may be especially difficult for manufacturing processes or formulation patents. Even if we or our licensors detect infringement by a third-party of our owned or in-licensed patents, we or our licensors, as the case may be, may choose not to pursue litigation against or settlement with the third-party. If we, or our licensors, later sue such third-party for patent infringement, the third-party may have certain legal defenses available to it, which otherwise would not be available except for the delay between when the infringement was first detected and when the suit was brought. Such legal defenses may make it impossible for us or our licensors to enforce our owned or in-licensed patents, as the case may be, against such third-party.

Issued patents covering our product candidates could be found invalid or unenforceable if challenged in court or the USPTO.

If we or one of our licensing partners initiate legal proceedings against a third-party to enforce a patent covering one of our product candidates, the defendant could counterclaim that the patent covering our product candidate, as applicable, is invalid and/or unenforceable. In patent litigation in the U.S., defendant counterclaims alleging invalidity and/or unenforceability are commonplace, and there are numerous grounds upon which a third-party can assert invalidity or unenforceability of a patent. Third parties may also raise similar claims before administrative bodies in the U.S. or abroad, even outside the context of litigation. Such mechanisms include inter parties review, ex parte re-examination, post-grant review, and equivalent proceedings in foreign jurisdictions (e.g., opposition proceedings). For example, EP3368069 and EP2981822 are currently subject to opposition proceedings. Such proceedings are expensive and could result in revocation or amendment to our patents in such a way that they no longer cover our product candidates. The outcome following legal assertions of invalidity and unenforceability is unpredictable. With respect to the validity question, for example, we cannot be certain that there is no invalidating prior art, of which we, our patent counsel and the patent examiner were unaware during prosecution. If a defendant were to prevail on a legal assertion of invalidity and/or unenforceability, or if we are otherwise unable to adequately protect our rights, we would lose at least part, and perhaps all, of the patent protection on our product candidates. Such a loss of patent protection could have a material adverse impact on our business and our ability to commercialize or license our technology and product candidates.

SRRK US Equity

SRRK · 10-K · period ended 2023-12-31

Item 1A. Risk Factors

SRRK US Equity☆

SRRK · 10-K · period ended 2023-12-31

Item 1A. Risk Factors

SRRK US Equity