mtd-20211231
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
(Mark One)
For the fiscal year ended December 31, 2021
OR
For the transition period from to
Commission file number 001-13595
Mettler-Toledo International Inc.
(Exact name of registrant as specified in its charter)
1900 Polaris Parkway
Columbus, OH43240
and
Im Langacher 44
CH 8606Greifensee, Switzerland
(Address of principal executive offices) (Zip Code)
1-614-438-4511 and +41-44-944-22-11
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class Trading Symbol Name of each exchange on which registered
Common Stock, $0.01 par value MTD New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: NONE
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yesý No ☐
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐Noý
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yesý No ☐
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yesý No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company” and "emerging growth company" in Rule 12b-2 of the Exchange Act. (Check one): Large accelerated filer.☒Accelerated filer☐ Non-accelerated filer ☐ Smaller reporting company ☐ Emerging growth company☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C.7262(b)) by the registered public accounting firm that prepared or issued its audit report. ý
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ý
As of January 27, 2022 there were 22,805,615 shares of the registrant’s Common Stock, $0.01 par value per share, outstanding. The aggregate market value of the shares of Common Stock held by non-affiliates of the registrant on June 30, 2021 (based on the closing price for the Common Stock on the New York Stock Exchange as of the last business day of the registrant’s most recently completed second fiscal quarter, June 30, 2021) was approximately $32.0 billion. For purposes of this computation, shares held by affiliates and by directors of the registrant have been excluded. Such exclusion of shares held by directors is not intended, nor shall it be deemed, to be an admission that such persons are affiliates of the registrant.
Documents Incorporated by Reference
Document Part of Form 10-K Into Which Incorporated
Certain Sections of the Proxy Statement for 2022 Part III
Annual Meeting of Shareholders
METTLER-TOLEDO INTERNATIONAL INC.
ANNUAL REPORT ON FORM 10-K
FOR THE FISCAL YEAR ENDED DECEMBER 31, 2021
Page
PART I
Item 1. Business 4
Item 1A. Risk Factors 14
Item 1B. Unresolved Staff Comments 27
Item 2. Properties 28
Item 3. Legal Proceedings 28
Executive Officers of the Registrant 28
PART II
Item 6. Reserved 31
Item 7A. Quantitative and Qualitative Disclosures about Market Risk 46
Item 8. Financial Statements and Supplementary Data 46
Item 9A. Controls and Procedures 47
Item 9B. Other Information 47
Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 47
PART III
Item 10. Directors, Executive Officers, and Corporate Governance 48
Item 11. Executive Compensation 49
Item 14. Principal Accounting Fees and Services 49
PART IV
Item 15. Exhibits and Financial Statement Schedules 49
SIGNATURES E-4
2
Table of Contents
FORWARD-LOOKING STATEMENTS DISCLAIMER
You should not rely on forward-looking statements to predict our actual results. Our actual results or performance may be materially different than reflected in forward-looking statements because of various risks and uncertainties, including statements about expected revenue growth and long-term impacts of COVID-19. You can identify forward-looking statements by terminology such as “may,” “will,” “could,” “would,” “should,” “expect,” “plan,” “anticipate,” “intend,” “believe,” “estimate,” “predict,” “potential,” or “continue.”
We make forward-looking statements about future events or our future financial performance, including earnings and sales growth, earnings per share, strategic plans and contingency plans, growth opportunities or economic downturns, our ability to respond to changes in market conditions, planned research and development efforts and product introductions, adequacy of facilities, access to and the costs of raw materials, shipping and supplier costs, gross margins, customer demand, our competitive position, pricing, capital expenditures, cash flow, tax-related matters, the impact of foreign currencies, compliance with laws, effects of acquisitions, and the impact of the COVID-19 pandemic on our business.
Our forward-looking statements may not be accurate or complete, and we do not intend to update or revise them in light of actual results. New risks also periodically arise. Please consider the risks and factors that could cause our results to differ materially from what is described in our forward-looking statements, including the uncertain duration and severity of the COVID-19 pandemic. See in particular “Factors Affecting Our Future Operating Results” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”
3
Table of Contents
PART I
Item 1.Business
We are a leading global supplier of precision instruments and services. We have strong leadership positions in all of our businesses and believe we hold global number-one market positions in most of them. We are recognized as an innovation leader and our solutions are critical in key research and development, quality control, and manufacturing processes for customers in a wide range of industries including life sciences, food, and chemicals. Our sales and service network is one of the most extensive in the industry. Our products are sold in more than 140 countries and we have a direct presence in approximately 40 countries. With proven growth strategies and a focus on execution, we have achieved a long-term track record of strong financial performance.
Our business is geographically diversified, with net sales in 2021 derived 29% from Europe, 38% from North and South America, and 33% from Asia and other countries. Our customer base is also diversified by industry and by individual end-customer.
Mettler-Toledo International Inc. was incorporated as a Delaware corporation in 1991 and became a publicly traded company with its initial public offering in 1997.
Business Segments
We have five reportable segments: U.S. Operations, Swiss Operations, Western European Operations, Chinese Operations, and Other. See Note 18 to the consolidated financial statements and Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations under “Results of Operations by Reportable Segment” for detailed results by segment and geographic region.
We manufacture a wide variety of precision instruments and provide value-added services to our customers. Our principal products and services are described below. We also describe our customers and distribution, sales and service, research and development, manufacturing, and certain other matters. These descriptions apply to substantially all of our products and related reportable segments.
Laboratory Instruments
We make a wide variety of precision laboratory instruments for sample preparation, synthesis, analytical bench top, material characterization, and in-line measurement. Our portfolio includes laboratory balances, liquid pipetting solutions, automated laboratory reactors including real-time analytics, titrators, pH meters, process analytics sensors and analyzer technology, physical value analyzers including density and refractometry instruments, thermal analysis systems, and other analytical instruments such as UV/VIS spectrophotometers and moisture analyzers. Our laboratory instruments have leading-edge embedded software and we also offer LabX, our laboratory software platform to manage and analyze data generated from our instruments. The laboratory instruments and related service business accounted for approximately 56% of our net sales in 2021, 54% in 2020, and 52% in 2019.
Laboratory Balances
Our laboratory balances have weighing ranges from one ten-millionth of a gram up to 64 kilograms. To respond to a wide range of customer needs and value/price points, we market our balances in a range of product tiers offering different levels of functionality. We also provide filter weighing and powder and liquid dosing automated systems. Based on the same weighing technology platform, we manufacture mass comparators, which are used by weights and measures officials as well as National Measurement Institute laboratories to ensure the accuracy of reference weights. Laboratory balances are primarily used in the pharmaceutical, biotechnology, testing labs, food, chemical, cosmetics, academia, and other industries.
4
Table of Contents
Pipettes
Pipettes are used in life science research laboratories for dispensing small volumes of liquids. We develop, manufacture, and distribute advanced pipettes, including single- and multi-channel manual and electronic pipettes. We also develop and produce high-value consumables such as pipette tips and tubes. We maintain service centers in key markets where customers periodically send their pipettes for certified recalibrations. These service centers, combined with our advanced asset management solutions, provide our customers with innovative solutions to maintain their instruments and meet regulatory compliance. Our principal end-markets are pharmaceutical, biotech, and academia.
Analytical Instruments
Titrators measure the chemical composition of samples and are used in environmental and research laboratories as well as in quality control labs in the pharmaceutical, testing lab, food and beverage, and other industries. Our high-end titrators are multi-tasking models, which can perform two determinations simultaneously on multiple vessels. Our offering includes robotics to automate routine work in quality control applications.
Thermal analysis systems measure material properties as a function of temperature, such as weight, dimension, energy flow, and viscoelastic properties. Thermal analysis systems are used in nearly every industry, but primarily in the plastics and polymer industries and academia and increasingly in the pharmaceutical industry.
pH meters measure acidity in laboratory samples. We also manufacture and sell density and refractometry instruments, which measure chemical concentrations in solutions. In addition, we manufacture and sell moisture analyzers, which precisely determine the moisture content of a sample by utilizing the loss on drying method, and UV/VIS spectrophotometers that optimize spectroscopic workflows.
Laboratory Software
LabX, our laboratory software platform, manages and analyzes data generated by our balances, titrators, pH meters, physical value analyzers, and other analytical instruments like UV/VIS spectrophotometers. LabX provides full network capability; assists with workflow automation; has efficient, intuitive protocols; and enables customers to collect and archive data in compliance with the U.S. Food and Drug Administration’s traceability and data integrity requirements for electronically stored data (also known as 21 CFR Part 11).
Automated Chemistry Solutions
Our automated chemistry solutions focus on select applications in the chemical and drug discovery process. Our automated lab reactors and in situ analysis systems are considered integral to the process development and scale-up activities of our customers. Our on-line measurement technologies, based on infrared and laser light scattering, enable customers to monitor chemical reactions and crystallization processes in real time in the lab and plant. In situ samples allow overnight sampling and testing. Additionally, we provide industry-leading software solutions that enable our customers to manage, optimize, and improve experiments as well as production scale-up. We believe that our portfolio of integrated technologies can bring significant efficiencies to the development process, enabling our customers to bring new drugs and chemicals to market faster.
Process Analytics
Our process analytics business provides instruments for the in-line measurement of liquid and gas parameters used primarily in the production process of pharmaceutical, biotech, beverage, micro-electronics, chemical, and refining companies, as well as power plants. More than half of our process
5
Table of Contents
analytics sales are to the pharmaceutical and biotech markets, where our customers need fast and secure scale-up and production that meet the validation processes required for GMP (Good Manufacturing Processes) and other regulatory standards like the USP (U.S. Pharmacopoeia) regulations for ultrapure water quality. We are a leading solution provider for liquid analytical measurement to control and optimize production processes. Our solutions include sensor and analyzer technology for measuring pH, dissolved oxygen, carbon dioxide, conductivity, turbidity, ozone, total organic carbons, pressure, bioburden, sodium, and silica, as well as laser analyzers for gas measurement. Intelligent sensor diagnostics capabilities enable improved asset management solutions for our customers to reduce process downtime and maintenance costs. Our instruments offer leading multi-parameter capabilities and plant-wide control system integration, which are key for integrated measurement of multiple parameters to secure production quality and efficiency. With a worldwide network of specialists, we support customers in critical process applications, compliance, and systems integration questions.
Industrial Instruments
We manufacture numerous industrial weighing instruments and related terminals and offer dedicated software solutions for the pharmaceutical, chemical, food, discrete manufacturing, and other industries. In addition, we manufacture metal detection, x-ray, checkweighing, and other end-of-line product inspection systems used in production and packaging. We supply automatic identification and data capture solutions, which integrate in-motion weighing, dimensioning, and identification technologies for transport, shipping, and logistics customers. We also offer heavy industrial scales and related software. The industrial instruments and related service business accounted for approximately 39% of our net sales in 2021, 40% in 2020, and 41% in 2019.
Industrial Weighing Instruments
We offer a comprehensive line of industrial scales and weighing devices, such as bench scales, floor scales, and weigh modules, for weighing loads from a few grams to several thousand kilograms in applications ranging from measuring materials in chemical production to quality completeness control in discrete manufacturing to weighing packages at the end of the line. Our products are used in a wide range of industrial applications, such as counting, formulating and mixing ingredients, and quality control.
Industrial Terminals
Our industrial scale terminals collect data and integrate it into manufacturing processes, helping to automate them. Our terminals allow users to remotely download formulation recipes or access setup data and can minimize downtime through predictive rather than reactive maintenance.
Transportation and Logistics
We supply automatic dimensional measurement and data capture solutions, which integrate in-motion weighing, dimensioning, and identification technologies. With these solutions, customers can measure the weight and cubic volume of packages for appropriate billing, load management, and quality control. Our solutions also integrate into customers’ information systems.
Vehicle Scale Systems
Our primary heavy industrial products are scales for weighing trucks or railcars (i.e., weighing bulk goods as they enter or leave a factory or at a toll station). Heavy industrial scales are capable of measuring weights up to 500 tons and permit accurate weighing under extreme environmental conditions. We also offer advanced computer software that can be used with our heavy industrial scales to facilitate a broad range of customer solutions and provides a complete system for managing vehicle transaction processing.
6
Table of Contents
Industrial Software
We offer software that can be used with our industrial instruments. Examples include FreeWeigh.Net, statistical quality control software; FormWeigh.Net, formulation/batching software; and DataBridge, which supports the operation of vehicle scales. FreeWeigh.Net and FormWeigh.Net provide full network capability and enable customers to collect and archive data in compliance with U.S. Food and Drug Administration requirements, 21 CFR Part 11.
Product Inspection
Increasing safety and consumer protection requirements are driving the need for more sophisticated end-of-line product inspection systems (e.g., for use in food processing and packaging, pharmaceutical, packaged consumer goods, and other industries). We are a leading global provider of metal detectors, x-ray systems, checkweighers, camera-based imaging equipment, and track-and-trace solutions that are used in these industries. Metal detectors are most commonly used to detect fine particles of metal that may be contained in raw materials or may be generated by the manufacturing process itself. X-ray inspection is used to detect metallic contamination in applications unsuited to metal detectors and many types of non-metallic contamination, such as glass, calcified bone, stones, and pits. Our x-ray systems are also used for mass control and for determining and controlling the fat content in meat. Checkweighers are used to control the filled weight of packaged goods such as food, pharmaceuticals, and cosmetics. Our camera-based vision inspection solutions provide in-line inspection of package quality, labels, and content, which are needs for food and beverage, consumer goods, and pharmaceutical companies. Vision inspection systems with associated specialist software enable our pharmaceutical customers to implement traceability and serialization tracking, as required by regulation. All of our technologies are integrated with material handling systems to ensure the correct presentation of the customer’s product to the device and the secure rejection of non-conforming product, and are frequently designed to comply with stringent hygiene standards. Our technologies may also be used together as components of integrated packaging lines. ProdX Inspect is our quality and productivity control software for helping customers comply with regulations and optimize process efficiency, either as a stand-alone solution or through integration with the customer’s manufacturing and enterprise systems.
Retail Weighing Solutions
Supermarkets, hypermarkets, and other food retail businesses make use of multiple weighing and food labeling solutions for handling fresh goods (such as meats, vegetables, fruits, or cheeses). We offer networked scales and software, which can integrate backroom, counter, self-service, and checkout functions and can incorporate fresh goods item data into a supermarket’s overall food item and inventory management system. In addition, we offer stand-alone scales for basic counter weighing and pricing, price finding, and printing. The customer benefits of our retail solutions are in the areas of enterprise-wide article and price management, merchandising, and regulatory compliance. In North America and select other markets, our offering also includes automated packaging and labeling solutions for the meat backroom, which are fully integrated with the scales in the store. The retail business accounted for approximately 5% of our net sales in 2021, 6% in 2020, and 7% in 2019.
Customers and Distribution
Our principal customers include companies in the following key end-markets: the life science industry (pharmaceutical and biotech companies, as well as independent research organizations and testing labs); food and beverage manufacturers; chemical, specialty chemicals, and cosmetics companies; the academic community; food retailers; the transportation and logistics industry; the metals industry; and the electronics industry.
7
Table of Contents
Our products are sold through a variety of distribution channels. Generally, more technically sophisticated products are sold through our direct sales force, while less complicated products are sold through indirect channels. Our sales through direct channels exceed our sales through indirect channels. A significant portion of our sales in the Americas is generated through indirect channels, including sales of our Ohaus-branded products. Ohaus-branded products target markets, such as the educational market, in which customers are interested in lower cost, a more limited set of features, and less comprehensive support and service.
We have a diversified customer base, with no single end-customer accounting for more than 1% of 2021 net sales.
Sales and Service
Market Organizations
We maintain geographically focused market organizations around the world that are responsible for all aspects of our sales and service. The market organizations are customer-focused, with an emphasis on building and maintaining value-added relationships with customers in our target market segments. Each market organization has the ability to leverage best practices from other units while maintaining the flexibility to adapt its marketing and service efforts to account for different cultural and economic conditions. Market organizations also work closely with our producing organizations (described below) by providing feedback on manufacturing and product development initiatives, new product and application ideas, and information about key market segments.
We have one of the largest and broadest global sales and service organizations among precision instrument manufacturers we compete against. At December 31, 2021, our sales and service group consisted of approximately 8,600 employees in sales, marketing and customer service (including related administration), and post-sales technical service, located in approximately 40 countries. This field organization has the capability to provide service and support to our customers and distributors in major markets across the globe. This is important because our customers increasingly seek to do business with a consistent global approach.
Service
Our service business continues to be successful with a focus on providing uptime and calibration services, as well as further expanding our offerings to provide value-added services for a range of market needs, including regulatory compliance, performance enhancements, application expertise and training, and remote services. We have a unique offering to our pharmaceutical customers in promoting the use of our instruments in compliance with FDA and other international regulations, and we can provide these services to most customers’ locations around the world. Our global service network is also an important factor in our ability to expand in emerging markets. We estimate that we have the largest installed base of weighing instruments in the world. Service (representing service contracts, on demand services, and replacement parts) accounted for approximately 20% of our net sales in 2021 and approximately 22% in both 2020 and 2019.
Beyond revenue opportunities, we believe service is a key part of our solution offering and helps significantly in customer retention. The close relationships and frequent contact with our large customer base allow us to be the trusted advisor of our customers, which provides us with high-quality sales opportunities as well as innovative product and application ideas.
8
Table of Contents
Research and Development and Manufacturing
Producing Organizations
Our research, product development, and manufacturing efforts are organized into a number of producing organizations. Our focused producing organizations help reduce product development time and costs, improve customer focus, and maintain technological leadership. The producing organizations work together to share ideas and best practices, and there is a close interface and coordinated customer interaction among marketing organizations and producing organizations. We also have regional logistics hubs to satisfy customer delivery requirements while optimizing our logistics processes.
Research and Development
We continue to invest in product innovation to provide technologically advanced products to our customers for existing and new applications. Over the last three years, we have invested $454 million in research and development ($170 million in 2021, $140 million in 2020, and $144 million in 2019), which is approximately 5% of net sales for each year. Our research and development efforts fall into three categories:
•technology advancements, which generate new products or features and increase the value of our products. These advancements may be in the form of enhanced or new functionality, new applications for our technologies, more accurate or reliable measurement, additional software capability, or automation through robotics or other means.
•applications development to complement our products and provide complete solutions to our customers.
•cost reductions, which reduce the manufacturing cost of our products through better overall design and/or improve the ease of serviceability.
We devote a substantial proportion of our research and development budget to software development. This includes software to process the signals captured by the sensors of our instruments, application-specific software, and software that connects our solutions into customers’ existing IT systems. We closely integrate research and development with marketing, manufacturing, and product engineering. We have approximately 1,500 employees in research and development and product engineering in countries around the globe.
Manufacturing
We are a worldwide manufacturer, with facilities principally located in China, Switzerland, the United States, Germany, the United Kingdom, and Mexico. We emphasize product quality in our manufacturing operations, and most of our products require very strict tolerances and exact specifications. We use an extensive quality control system that is integrated into each step of the manufacturing process. All major manufacturing facilities have achieved ISO 9001 certification. We believe that our manufacturing capacity is sufficient to meet our present and currently anticipated demand.
We generally manufacture critical components, which are components that contain proprietary technology. When outside manufacturing is more efficient, we contract with other manufacturers for certain nonproprietary components. We use a wide range of suppliers. We believe our supply arrangements are adequate and that there are no material constraints on the sources and availability of materials. From time to time, we may rely on a single supplier for all of our requirements of a particular component. Supply arrangements for electronic components are generally made globally.
9
Table of Contents
Backlog; Seasonality
Our manufacturing turnaround time is generally short, which permits us to manufacture orders to fill for most of our products. Backlog is generally a function of requested customer delivery dates and is typically not longer than one to two months.
Our business has historically experienced a slight amount of seasonal variation, particularly the high-end laboratory instruments business. Traditionally, sales in the first quarter are slightly lower than, and sales in the fourth quarter are slightly higher than, sales in the second and third quarters. Fourth quarter sales have historically generated approximately 28% to 30% of our net sales. This trend has a somewhat greater effect on earnings before taxes than on net sales because fixed costs are generally incurred evenly across all quarters.
Employees
Our total global workforce was 17,800, consisting of 15,600 employees and 2,200 temporary personnel, as of December 31, 2021, and includes approximately 6,200 in Europe, 5,500 in North and South America, and 6,100 in Asia and other countries.
We are proud of our corporate culture and our talented employees. We endeavor to continue to provide an attractive work environment and keep our employees fully engaged. We know that our future success depends on attracting, developing, and retaining the best employees. We promote equal opportunity and inclusiveness worldwide and value diversity in our global workforce, which reflects the diversity in the many communities in which we operate internationally. We employ people of more than 100 nationalities.
We promote diversity and we encourage all employees, inclusive of all our demographics, to take on more responsibilities and management positions. As of December 31, 2021, approximately 36% of our global employee headcount was female, with approximately 28% holding management positions. We place great emphasis on performance management, training, and developing our employees across all levels and regions. During 2021, approximately 13,900 employees completed one or more training courses. Lastly, we have local safety programs in place in all relevant units, and select locations have implemented a certified work safety management system. Severe workplace accidents are rare and we have had no fatalities from occupational incidents in the past five years.
We believe our employee relations are good, and we have not suffered any material employee work stoppage or strike during the last five years. Approximately 7,600 employees are represented by collective bargaining or another arrangement organized to represent employee interests.
Sustainability
Sustainability touches all aspects of our business, from designing, sourcing, and producing our products, to selling and delivering them to our customers, to handling them at the end of their lifecycle. A sustainable mindset helps guide us to make the right decisions for our customers, employees, suppliers, shareholders, and the communities in which we operate our business. We want to manage our business sustainably to position the Company for long-term growth. More than 10 years ago, we launched our GreenMT program to pursue environmental, social, and governance priorities where we can have a significant impact. We do this in five key areas: (1) keeping our operations sustainable over the long term by ensuring we use resources efficiently, (2) helping our customers to be sustainable in their businesses by offering sustainable products and services, (3) promoting responsible practices within our supply chain, (4) ensuring an engaged workforce through fair, attractive, safe, and development-minded workplaces, and (5) following corporate governance best practices.
We have set a number of goals relating to our GreenMT sustainability program, including reducing our carbon footprint and other environmental, social, and governance goals. As of 2020, we achieved carbon neutrality with respect to Scope 1 and Scope 2 CO2 emissions, and source 100% renewable
10
Table of Contents
electricity. We also broadened our goals relating to waste, including reducing our waste intensity by 20% and achieving zero waste to landfill, in each case by 2025. We are also committed to greenhouse gas emission reduction targets in line with what the latest climate science deems necessary to meet the goals of the 2015 Paris Agreement on climate change. Our commitment includes near-term, long-term, and net-zero targets consistent with the latest criteria issued by the Science Based Target initiative (SBTi). We are working toward validating our targets with SBTi and intend to share additional details on the specific targets as we progress through the validation process. We report annually on our progress related to sustainability topics in our Corporate Responsibility Report, available on www.mt.com/sustainability.
Blue Ocean Program
Blue Ocean refers to our program to establish a global operating model with standardized, automated, and integrated processes and high levels of global data transparency. It encompasses an enterprise architecture, with a global, single-instance ERP system. Within our IT systems, we continue to move toward integrated, homogeneous applications and common data structures. We are also largely standardizing our key business processes. The implementation of the systems and processes has been proceeding on a staggered basis over a multi-year period. We have implemented the Blue Ocean program in our U.S., China, Switzerland, Germany, U.K., Benelux, Spain, Japan, and Southeast Asia operations. We estimate that we have approximately 85% of our users on the program, and we will continue to implement additional locations and functionality over the coming years.
Intellectual Property
We hold over 5,000 patents and trademarks (including pending applications), primarily in the United States, Switzerland, China, the European Union, Germany, the United Kingdom, Italy, France, Japan, South Korea, Brazil, and India. Our products generally incorporate a wide variety of technological innovations, some of which are protected by patents of various durations. Products are generally not protected as a whole by individual patents, and as a result, no one patent or group of related patents is material to our business. We have numerous trademarks, including the Mettler-Toledo name and logo, which are material to our business. We regularly protect against infringement of our intellectual property.
Regulation
Our products are subject to various regulatory standards and approvals by weights and measures regulatory authorities. All of our electrical components are subject to electrical safety standards. We believe that we are in compliance in all material respects with applicable regulations.
Approvals are required to ensure our instruments do not impermissibly influence other instruments and are themselves not affected by other instruments. In addition, some of our products are used in “legal for trade” applications, in which prices based on weight are calculated and for which specific weights and measures approvals are required. Although there are a large number of regulatory agencies across our markets, there is an increasing trend toward harmonization of standards, and weights and measures regulation is harmonized across the European Union.
Our products may also be subject to special requirements depending on the end-user and market. For example, laboratory customers are typically subject to Good Laboratory Practices (GLP), industrial customers to Good Manufacturing Practices (GMP), pharmaceutical customers to U.S. Food and Drug Administration (FDA) regulations, and customers in food processing industries may be subject to Hazard Analysis and Critical Control Point (HACCP) regulations. Products used in hazardous environments may also be subject to special requirements.
11
Table of Contents
Environmental Matters
We are subject to environmental laws and regulations in the jurisdictions in which we operate. We own or lease a number of properties and manufacturing facilities around the world. Like many of our competitors, we have incurred, and will continue to incur, capital and operating expenditures and other costs in complying with such laws and regulations.
We are currently involved in, or have potential liability with respect to, the remediation of past contamination in certain of our facilities. A former subsidiary of Mettler-Toledo, LLC known as Hi-Speed Checkweigher Co., Inc. was one of two private parties ordered by the New Jersey Department of Environmental Protection, in an administrative consent order signed on June 13, 1988, to investigate and remediate certain ground water contamination at a property in Landing, New Jersey. After the other party under this order failed to fulfill its obligations, Hi-Speed became solely responsible for compliance with the order. Residual ground water contamination at this site is now within a Classification Exception Area which the Department of Environmental Protection has approved and within which the Company oversees monitoring of the decay of contaminants of concern. A concurrent Well Restriction Area also exists for the site. The Department of Environmental Protection does not view these vehicles as remedial measures, but rather as “institutional controls” that must be adequately maintained and periodically evaluated. We estimate that the costs of compliance associated with the site over the next several years will be approximately a total of $0.4 million.
In addition, certain of our present and former facilities have or had been in operation for many decades and, over such time, some of these facilities may have used substances or generated and disposed of wastes that are or may be considered hazardous. It is possible that these sites, as well as disposal sites owned by third parties to which we have sent wastes, may in the future be identified and become the subject of remediation. Although we believe that we are in substantial compliance with applicable environmental requirements and, to date, we have not incurred material expenditures in connection with environmental matters, it is possible that we could become subject to additional environmental liabilities in the future that could have a material adverse effect on our financial condition, results of operations, or cash flows.
Competition
Our markets are highly competitive. Many of the markets in which we compete are fragmented both geographically and by application, particularly the industrial and food retailing markets. As a result, we face numerous regional or specialized competitors, many of which are well established in their markets. For example, some of our competitors are divisions of larger companies with potentially greater financial and other resources than our own. In addition, some of our competitors are domiciled in emerging markets and may have a lower cost structure than ours. We are confronted with new competitors in emerging markets which, although relatively small in size today, could become larger companies in their home markets. Given the sometimes significant growth rates of these emerging markets, and in light of their cost advantage over developed markets, emerging market competitors could become more significant global competitors. Taken together, the competitive forces present in our markets can impair our operating margins in certain product lines and geographic markets.
We expect our competitors to continue to improve the design and performance of their products and to introduce new products with competitive prices. Although we believe that we have technological and other competitive advantages over many of our competitors, we may not be able to realize and maintain these advantages. These advantages include our worldwide market leadership positions; our global brand and reputation; our track record of technological innovation; our comprehensive, high-quality solution offering; our global sales and service offering; our large installed base of instruments; and the diversification of our revenue base by geographic region, product range, application, and customer. To remain competitive, we must continue to invest in research and development, sales and marketing,
12
Table of Contents
customer service and support, and operational excellence throughout our supply chain. We cannot be sure that we will have sufficient resources to continue to make these investments or that we will be successful in identifying, developing, and maintaining any competitive advantages.
We believe the principal competitive factors in developed markets for purchasing decisions are the product itself, application support, service support, and price. In emerging markets, where there is greater demand for less sophisticated products, price is a more important factor than in developed markets. Competition in the U.S. laboratory market is also influenced by the presence of large distributors that sell not only our products but those of our competitors as well.
Company Website and Information
You can find our website on the internet at www.mt.com. The website contains information about us and our operations. The information contained on our website is not included in, or incorporated by reference into, this annual report on Form 10-K. You can view and download free of charge copies of each of our filings with the SEC on Form 10-K, Form 10-Q, Form 8-K, and Schedule 14A and all amendments to those reports by accessing www.mt.com, clicking on About Us, Investor Relations, and then clicking on SEC Filings. The SEC maintains a website at https://www.sec.gov that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC.
Our website also contains copies of the following documents that you can download free of charge:
•Corporate Governance Guidelines
•Audit Committee Charter
•Compensation Committee Charter
•Nominating and Corporate Governance Committee Charter
•Code of Conduct
•Equal Employment Opportunity Policy
•Business Partner Code of Conduct
•Ethical, Social, and Quality Standards
•Corporate Responsibility Report
•Environmental Policy
•Political Participation Policy
•Conflict Mineral Report
•Statement on Slavery, Human Trafficking, and Transparency in the Supply Chain
You can also obtain in print, free of charge, any of the above documents and any of our reports on Form 10-K, Form 10-Q, Form 8-K, and Schedule 14A and all amendments to those reports by sending a written request to our Investor Relations Department:
Investor Relations
Mettler-Toledo International Inc.
1900 Polaris Parkway
Columbus, OH 43240 U.S.A.
Phone: +1 614 438 4748
Email: mary.finnegan@mt.com
13
Table of Contents
Item 1A.Risk Factors
Factors Affecting Our Future Operating Results
Operational Risks
The COVID-19 pandemic has adversely affected, and will likely continue to adversely affect, various aspects of our business, such as our workforce and supply chain, and make it more difficult and expensive to meet our obligations to our customers, and has adversely affected the global economy, which in turn can adversely affect our global business, results of operations, and financial condition.
Our global operations expose us to risks associated with public health crises that could have an adverse effect on our business results and financial condition.
For instance, since late 2019, the coronavirus pandemic (COVID-19) has spread globally in all countries where we conduct business. The COVID-19 pandemic is evolving and has led to the implementation of various responses, including government-imposed quarantines, stay-at-home orders and lockdowns, travel restrictions, vaccination and testing requirements, and other public health safety measures. These restrictions continue to change as COVID-19 evolves, variants are discovered, and vaccinations are distributed in each country and region.
The COVID-19 pandemic has resulted and may continue to result in significant disruptions to the global economy, as well as to businesses and capital markets around the world. COVID-19 has interfered and may continue to interfere with general commercial activity related to our supply chain and customer base. In addition, COVID-19 may negatively affect our customers’ businesses, which may result in delayed or reduced purchases from us. Some customers may also have difficulty meeting their payment obligations to us, resulting in late payments or an inability of some customers to make payments at all.
As the COVID-19 pandemic continues, we may experience volatility in our results, including reduced global sales volume from lower customer demand. Our operations could be negatively affected if our employees are subject to governmental COVID-19 curfews, stay-at-home orders, lockdowns, or facility closures, or if they are quarantined or become ill as a result of exposure to COVID-19.
Future impacts to the Company's business as a result of COVID-19 and its variants could also include disruptions to the Company's manufacturing operations caused by lockdowns, facility closures, reductions in operating hours, staggered shifts and other social distancing efforts, and labor shortages. The emergence of the Omicron variant of COVID-19 in late 2021 has presented particular challenges to the global economy given its high level of transmissibility, which can cause many people to be affected at the same time or over a short period of time, leading to potential disruptions to our business and supply chain. Our supply chain is currently facing wide-ranging global challenges, although we have been able to meet delivery requirements of our customers with some interruption. We continue to closely monitor risks associated with our supply chain, including the availability of certain components, material shortages, supplier delays, potential transportation delays, and higher transportation and material costs.
Global inflation also significantly increased during 2021 related to the COVID-19 economic recovery and associated disruptions in global demand, logistics, and labor markets. These inflationary conditions could have a negative impact on our operating results in future years. Disruptions in labor markets, including a new competitive landscape created by remote work capabilities, could also lead to higher attrition, increased compensation levels, and longer recruiting cycles.
Uncertainties and challenges related to COVID-19, including new variants (such as Omicron), lockdowns, and logistical and inflationary challenges, and the resulting impact to the economy continue in all regions of the world, and market conditions may change quickly. While it is difficult to estimate the
14
Table of Contents
extent and duration of any COVID-19 implications, the effects on our business, results of operations, and financial condition could be material.
We sell primarily to companies in developed countries. An economic downturn in these countries could hurt our operating results.
Most of our business is derived from companies in developed countries. Economic uncertainty in many parts of the world, including regional effects of the COVID-19 pandemic, international trade disputes, and sovereign debt levels in the European Union and the United States, are situations that we monitor closely. If developed countries were to experience slow growth or recession, we could see the following effects:
•a drop in demand for our products;
•companies being unable to finance their businesses;
•difficulty in obtaining materials and supplies;
•potential devaluation and/or impairment of assets;
•difficulty in collecting accounts receivables;
•an increase in accounts receivable write-offs; and
•greater foreign exchange rate volatility affecting our profitability and cash flow.
Economic downturns or recessions adversely affect our operating results because our customers often decrease or delay capital expenditures. Customers may also purchase lower-cost products made by competitors and not resume purchasing our products even after economic conditions improve. These conditions would reduce our revenues and profitability.
In addition, a potential financial crisis on financial institutions globally would likely have an adverse effect on the global capital markets and our business.
We are subject to certain risks associated with our international operations and have a significant concentration of business in China.
We conduct business in many countries, including emerging markets in Asia, Latin America, and Eastern Europe, and these operations represent a significant portion of our sales and earnings. For example, our Chinese operations accounted for 21% of sales to external customers, approximately 36% of our global production, and 35% of total segment profit during 2021. In addition to the currency risks discussed below, international operations pose other substantial risks and problems for us, including the following:
•local tariffs and trade barriers;
•additions or revisions to a country's legal and regulatory requirements;
•difficulties in staffing and managing local operations and/or mandatory salary increases;
•credit risks arising from financial difficulties facing local customers and distributors;
•difficulties in protecting intellectual property;
•nationalization of private enterprises which may result in the confiscation of assets, as we hold significant assets around the world in the form of property, plant, and equipment, inventory, and accounts receivable, as well as $59.0 million of cash at December 31, 2021 in our Chinese subsidiaries;
•restrictions on investments and/or limitations regarding foreign ownership;
•adverse tax consequences, including tax disputes and imposition or increase of withholding and other taxes on remittances and other payments by subsidiaries;
•the adoption of new or expansion of current travel restrictions or the intensification of trade wars;
•domestic purchasing requirements that could favor local competition;
15
Table of Contents
•other uncertain local economic, political, and social conditions, including inflation, hyper-inflation, and other decreases in purchasing power, or periods of low or no productivity growth; and
•credit tightening or reduction in credit availability for local customers.
We must also comply with regulations regarding the conversion and repatriation of funds earned in local currencies. For example, we need government approval to convert earnings from our operations in China into other currencies and to repatriate these funds. If we cannot comply with these or other applicable regulations or these regulations are amended to make it more difficult to repatriate the funds, we may face increased difficulties in using cash generated in China.
We are required to comply with various import, export control, and economic sanctions laws, which may affect our transactions with certain customers, business partners, and other persons, including in certain cases dealings with or between our employees and subsidiaries. In certain circumstances, export control and economic sanctions regulations may prohibit the export of certain products, services, and technologies, and in other circumstances, we may be required to obtain an export license before exporting a controlled item. While we continue to do business in Russia, we follow all relevant laws and regulations. Sanctions imposed on business in Russia may affect the economy and our business in Russia. In addition, failure to comply with any of these regulations could result in civil and criminal actions, monetary and non-monetary penalties, disruptions to our business, limitations on our ability to import and export products and services, and damage to our reputation.
Growth in emerging markets, especially China, can be volatile and change quickly.
Our business and financial performance may be adversely affected by a cybersecurity attack.
We rely on our technology infrastructure to interact with suppliers, sell our products and services, fulfill orders, support our customers, and bill, collect, and make payments. Our internally developed system and processes, as well as those provided by third-party vendors, may be susceptible to damage or interruption from cybersecurity incidents, such as terrorist or hacker attacks, the introduction of malicious computer viruses, ransomware, falsification of banking and other information, insider risk, or other security breaches. If there is a cybersecurity incident, we may suffer interruptions in service, loss of assets or data, or reduced functionality. Many of our systems are not redundant, and our disaster recovery planning is not sufficient for every eventuality a cybersecurity incident could cause. Security breaches of our systems which allow inappropriate access to or inadvertent transfer of information and misappropriation or unauthorized disclosure of confidential information belonging to us or to our employees, customers, or suppliers could result in our suffering significant financial and reputational damage.
Customers may use our products and/or software to generate or manage critical information. Though we take steps to ensure our products and/or software are secure, it is possible that a cyber attack could result in the loss or compromise of critical information. If a customer alleges that a cyber attack causes or contributes to a loss or compromise of critical information, whether or not caused by us, we could face harm to our reputation and financial condition.
While we attempt to mitigate cybersecurity risks by employing a number of proactive measures, including mandatory quarterly ongoing employee training and awareness, technical security controls, enhanced data protection, and maintenance of backup and protective systems, our systems remain potentially vulnerable to cybersecurity threats, any of which could have a material adverse effect on our business. We believe our mitigation measures reduce, but cannot eliminate, the risk of a cybersecurity incident. Despite any precautions we may take, a cybersecurity incident could harm our reputation and financial condition and cause us to incur legal liability and increased costs to respond to such events. Our cyber liability insurance may not be sufficient to compensate us for losses that may result from interruptions in our services or asset or data loss as a result of cybersecurity incidents.
16
Table of Contents
In addition, regulatory or legislative action related to cybersecurity, privacy, and data protection worldwide, such as the European General Data Protection Regulation which went into effect in May 2018, may increase the costs to develop, implement, or secure our products or services. We expect cybersecurity regulations to continue to evolve and be costly to implement. If we violate or fail to comply with such regulatory or legislative requirements, we could be fined or otherwise sanctioned, and such fines or penalties could have a material adverse effect on our business and operations.
We are vulnerable to system failures and data loss risks, which could harm our business.
We rely on our technology infrastructure to interact with suppliers, sell our products and services, support our customers, fulfill orders, and bill, collect, and make payments. Our systems are vulnerable to damage or interruption from natural disasters, power loss, telecommunication failures, malicious employees or employee negligence, computer viruses, and other events. When we upgrade or change systems, we may suffer interruptions in service, loss of data, or reduced functionality. A significant number of our systems are not redundant, and our disaster recovery planning is not sufficient for every eventuality. Despite any precautions we may take, such problems could result in interruptions in our services, fraudulent or negligent loss of assets, or unauthorized disclosure of confidential information, which could harm our reputation and financial condition. Our business interruption insurance may not be sufficient to compensate us for losses that may result from interruptions in our services or data loss as a result of system failures.
Customers may use our products and/or software to generate or manage confidential information. Though we take steps to ensure our products and/or software are secure, it is possible customers could lose confidential information stored on our products. If a customer alleges system failures in our products and/or software cause or contribute to a loss, whether or not caused by us, we could face harm to our reputation and our financial condition and legal liability.
We have also been implementing our Blue Ocean program to globalize our business processes and information technology systems that includes the implementation of a Company-wide enterprise resource planning system. This has been proceeding on a staggered basis over a multi-year period. We have implemented the program in our U.S., Chinese, Swiss, German, U.K., Benelux, Spain, Japan, and Southeast Asia operations. We estimate that we have approximately 85% of our users on the program and will continue to implement additional locations and functionality over the coming years. If our implementation is flawed, we could suffer interruptions in operations and customer-facing activities that could harm our reputation and financial condition or cause us to lose data, experience reduced functionality, or have delays in reporting financial information. It may take us longer to implement the program than we have planned, and the project may cost us more than we have estimated, either of which would negatively impact our ability to generate cost savings or other efficiencies. In addition, the program has increased our reliance on a single information technology system, which would have greater consequences should we experience a system disruption.
Our ability to manufacture and deliver products and services may be disrupted.
We have key manufacturing facilities located in China, Europe, and the United States. Many of our products are developed and manufactured at single locations, with limited alternate facilities. In addition, a large portion of our products and spare parts are distributed through regional logistics centers, in which certain logistics activities are outsourced to third parties. If we experience any significant disruption in these facilities for any reason, such as the COVID-19 pandemic described on page 14, global supply chain and production issues, strikes or other labor unrest, power interruptions, cybersecurity attacks, fire, earthquakes, hurricanes, floods, rising water levels, other weather events or natural disasters (including the potential impacts of climate change), or other events beyond our control, we may be unable to satisfy customer demand for our products or services resulting in lost sales. It may be expensive to resolve these
17
Table of Contents
issues, even though some of these risks are covered by insurance policies. More importantly, customers may switch to competitors and may not return to us even if we resolve the interruption.
Our business would suffer if we were unable to obtain supplies of material.
We purchase most of our raw materials, components, and supplies from multiple suppliers. Some items are purchased from a limited or single source of supply, and disruption of these sources whether as a result of issues with our suppliers' operation or the timely availability of shipments from freight carriers could affect our ability to manufacture products. The COVID-19 pandemic has caused numerous disruptions to supply chains, often resulting in delivery delays, inflated costs, and increases in shipping rates. Even where multiple sources of materials and components are available, the quality of the alternative materials, regulatory and contractual requirements to qualify materials for use in manufacturing, and the time required to establish new relationships with reliable suppliers could result in manufacturing delays and possible loss of sales. If we are unable to obtain materials or components for an extended time, this could damage our customer relationships and harm our financial condition or results of operations.
Our product development efforts may not produce commercially viable products in a timely manner.
If we do not introduce new products and enhancements, our products could become technologically obsolete over time, which would harm our operating results. To remain competitive, we must continue to make significant investments in research and development, sales and marketing, customer service and support, and operational excellence throughout our supply chain. We cannot be sure that we will have sufficient resources to continue to make these investments. In developing new products, we may be required to make substantial investments before we can determine their commercial viability. As a result, we may not be successful in developing new products and we may never realize the benefits of our research and development activities.
We face risks related to sales through distributors and other third parties that we do not control, which could harm our business.
We sell some products through third parties, including distributors and value-added resellers. This exposes us to various risks, including competitive pressure, concentration of sales volumes, credit risks, and compliance risks. We may rely on one or a few key distributors for a product or market, and the loss of these distributors could reduce our revenue and net earnings. Distributors may also face financial difficulties, including bankruptcy, which could harm our collection of accounts receivables. Violations of the FCPA or similar anti-bribery laws by distributors or other third-party intermediaries could materially impact our business. In addition to financial risk, actions of some of our distributors could cause reputational harm, especially if our products are involved. Risks related to our use of distributors may reduce sales, increase expenses, and weaken our competitive position.
Departures of key employees could impair our operations.
Key employees could leave the Company. If any key employees stopped working for us, our operations could be harmed. Important R&D personnel may leave and join competitors, which could substantially delay or hinder ongoing development projects. We have no key man life insurance policies with respect to any of our senior executives.
Our business involves certain operating risks, and our insurance may not be adequate to cover all insured losses of liabilities we might incur in our operations.
We have procured various insurance policies for certain types of insurance coverage and in varying coverage amounts. Our insurance may not be adequate to cover all losses or liabilities that we might incur
18
Table of Contents
in our operations. Furthermore, our insurance may not adequately protect us against liability from all of the hazards of our business. As a result of market conditions, premiums and deductibles for certain of our insurance policies may substantially increase. In some instances, certain insurance could become unavailable or available only for reduced amounts of coverage. We also are subject to the risk that we may be unable to maintain or obtain insurance of the type and amount we desire at a reasonable cost. If we were to incur a significant liability for which we were uninsured or for which we were not fully insured, it could have a material adverse effect on our financial position, results of operations, and cash flows.
Strategic Risks
A prolonged downturn or additional consolidation in the pharmaceutical, food and beverage, and chemical industries could adversely affect our operating results. A reduction in the capital resources or government funding of our customers could reduce our sales.
Our products are used extensively in the pharmaceutical, food and beverage, and chemical industries. Consolidation in these industries hurt our sales in prior years. In recent years, there has been an increase in consolidation within these industries. A prolonged global economic downturn, a downturn affecting one or more of these industries, or additional consolidation in any of these industries could adversely affect our operating results. In addition, the capital spending policies of our customers in these and other industries are based on a variety of factors we cannot control, including the resources available for purchasing equipment, the spending priorities among various types of equipment, and policies regarding capital expenditures. Any decrease or delay in capital spending by our customers would cause our revenues to decline and could harm our profitability. A decline in government funding of research or education could reduce some customers’ ability to purchase our products.
We operate in highly competitive markets, and it may be difficult for us to preserve operating margins, gain market share, and maintain a technological advantage.
Our markets are highly competitive. Many are fragmented both geographically and by application, particularly the industrial and food retailing markets. As a result, we face numerous regional or specialized competitors, many of which are well established in their markets. In addition, some of our competitors are divisions of larger companies with potentially greater financial and other resources than our own. There has also been an increase in the consolidation of precision instrument companies in recent years. Any consolidation within our market could result in competitors becoming larger and having greater financial and other resources than our own. Some of our competitors are domiciled or operate in emerging markets and may have a lower cost structure than ours. We are confronted with new competitors in emerging markets which, although relatively small in size today, could become larger companies in their home markets. Given the sometimes significant growth rates of these emerging markets, and in light of their cost advantage over developed markets, emerging market competitors could become more significant global competitors. Taken together, the competitive forces present in our markets could harm our operating margins. We expect our competitors to continue to improve the design and performance of their products and to introduce new products with competitive prices. Although we believe that our products and services have advantages over our competitors, we may not be able to realize and maintain these advantages.
19
Table of Contents
We may face risks associated with future acquisitions.
We may pursue acquisitions of complementary product lines, technologies, or businesses. Acquisitions involve numerous risks, including difficulties in integrating the acquired operations, technologies, and products; diversion of management’s attention from other business concerns; and potential departures of key employees of the acquired company. If we successfully identify acquisitions in the future, completing such acquisitions may result in new issuances of our stock that may be dilutive to current owners, increases in our debt and contingent liabilities, and additional amortization expense related to intangible assets. Any of these acquisition-related risks could have a material adverse effect on our profitability.
Larger companies have identified life sciences and instruments as businesses they will consider entering or expanding their presence, which could change the competitive dynamics of these markets. In addition, we may not be able to identify, successfully complete, or integrate potential acquisitions in the future. Even if we can do so, we cannot be sure that these acquisitions will have a positive impact on our business or operating results. We are also required to estimate the fair value of certain assets acquired or liabilities assumed. Such fair values may be based on valuation models which are subject to inherent uncertainties and our judgments regarding certain assumptions.
Financial Risks
Currency fluctuations affect our operating profits.
Our earnings are affected by changing exchange rates. We are particularly sensitive to changes in the exchange rates between the Swiss franc, euro, Chinese renminbi, and U.S. dollar. We have more Swiss franc expenses than we do Swiss franc sales because we develop and manufacture products in Switzerland that we sell globally and have a number of corporate functions located in Switzerland. When the Swiss franc strengthens against our other trading currencies, particularly the U.S. dollar and euro, our earnings go down. We also have significantly more sales in the euro than we do expenses. When the euro weakens against the U.S. dollar and Swiss franc, our earnings also go down. We estimate a 1% strengthening of the Swiss franc against the euro would reduce our earnings before tax by approximately $1.9 million to $2.1 million annually.
We also conduct business throughout the world, including Asia Pacific, the United Kingdom, Eastern Europe, Latin America, and Canada. Fluctuations in these currency exchange rates against the U.S. dollar can also affect our operating results. The most significant of these currency exposures is the Chinese renminbi. The impact on our earnings before tax of the Chinese renminbi weakening 1% against the U.S. dollar is a reduction of approximately $2.9 million to $3.1 million annually.
In addition to the effects of exchange rate movements on operating profits, our debt levels can fluctuate due to changes in exchange rates, particularly between the U.S. dollar, the Swiss franc, and euro. Based on our outstanding debt at December 31, 2021, we estimate that a 5% weakening of the U.S. dollar against the currencies in which our debt is denominated would result in an increase of $34.3 million in the reported U.S. dollar value of our debt.
We may experience impairments of goodwill or other intangible assets.
As of December 31, 2021, our consolidated balance sheet included goodwill of $648.6 million and other intangible assets of $307.5 million.
Our business acquisitions typically result in goodwill and other intangible assets, which affect the amount of future period amortization expense and possible impairment expense. We make estimates and assumptions in valuing such intangible assets that affect our consolidated financial statements.
20
Table of Contents
In accordance with U.S. GAAP, our goodwill and indefinite-lived intangible assets are not amortized, but are evaluated for impairment annually in the fourth quarter, or more frequently if events or changes in circumstances indicate that an asset might be impaired. The evaluation may be based on valuation models that estimate fair value. In preparing the valuation models, we consider a number of factors, including operating results, business plans, economic conditions, future cash flows, and transaction and market data. There are inherent uncertainties related to these factors and our judgment in applying them to the impairment analyses. The significant estimates and assumptions within our fair value models include sales growth, controllable cost growth, perpetual growth, effective tax rates, and discount rates. Our assessments to date have indicated that there has been no impairment of these assets.
Should any of these estimates or assumptions change, or should we incur lower-than-expected operating performance or cash flows, including from a prolonged economic slowdown, we may experience a triggering event that requires a new fair value assessment for our reporting units, possibly prior to the required annual assessment. These types of events and resulting analysis could result in impairment charges for goodwill and other indefinite-lived intangible assets if the fair value estimate declines below the carrying value.
Our amortization expense related to intangible assets with finite lives may materially change should our estimates of their useful lives change.
Concerns regarding the Eurozone debt levels and market perception related to the instability of the euro could affect our operating profits.
We conduct business in many countries that use the euro as their currency (the Eurozone). Concerns persist regarding the debt burden of certain Eurozone countries and their ability to meet future financial obligations. In addition, concerns in recent years have existed regarding the overall stability of the euro and the suitability of the euro as a single currency given the diverse economic and political circumstances in individual Eurozone countries.
These concerns could lead to the re-introduction of individual currencies in one or more Eurozone countries or, in more extreme circumstances, the possible dissolution of the euro currency entirely. Should the euro dissolve entirely, the legal and contractual consequences for holders of euro-denominated obligations would be determined by laws in effect at such time. These potential developments, or market perceptions concerning these and related issues, could adversely affect the value of our euro-denominated assets and obligations. In addition, concerns over the effect of this type of financial crisis on financial institutions in Europe and globally could have an adverse effect on the global capital markets and, more specifically, on the ability of our Company, our customers, suppliers, and lenders to finance their respective businesses and to access liquidity at acceptable financing costs, if at all, on the availability of supplies and materials, and on the demand for our products. For information on the impact of the United Kingdom's withdrawal from the European Union, see "Risk Factors — The United Kingdom's withdrawal from the European Union could adversely impact our results of operations."
Legal, Tax, Regulatory, and Other Risks
Unanticipated changes in our tax rates or additional income tax liabilities could impact our profitability.
We are subject to income taxes in the United States and various other jurisdictions, and our domestic and international tax liabilities are subject to allocation of expenses among different jurisdictions. Our effective tax rates and tax obligations could be adversely affected by changes in tax laws or rates (including the potential implementation of various U.S. tax proposals), changes in the mix of earnings by jurisdiction, changes in the valuation of deferred tax assets and liabilities, and material adjustments from tax audits.
21
Table of Contents
In particular, the carrying value of deferred tax assets, which are predominantly in the U.S., is dependent upon our ability to generate future taxable income in the U.S. In addition, the amount of income taxes we pay is subject to ongoing audits in various jurisdictions, and a material assessment by a governing tax authority could affect our profitability.
Our tax expense and tax obligations could increase as a result of changing application of tax law.
Governments are facing greater pressure on public finances, which could lead to their more aggressively applying existing tax laws and regulations. Governments also periodically change tax laws and regulations.
The Organization for Economic Co-Operation and Development (OECD) has recently proposed changes to the current transfer pricing arm’s length standard for allocating profit as well as a 15% minimum tax by jurisdiction. While the provision to alter the way profit is allocated by jurisdiction is not expected to impact the Company, the 15% minimum tax by jurisdiction may adversely impact the Company's global tax provision. Additionally, the U.S. has proposed certain changes in the way U.S. multinational companies are taxed, which may also result in higher tax obligations.
Any changes in corporate income tax rates or regulations, on repatriation of dividends, earnings, share repurchases, or capital, or on transfer pricing, as well as changes in the interpretation of existing tax laws and regulations in the jurisdictions in which we operate, could adversely affect our cash flow and increase our overall tax burden, which would negatively affect our profitability. Potential OECD changes impacting consumer businesses could also have an unfavorable effect on some of our key customer segments such as pharmaceutical and food and beverage, which could result in a decline or delay in capital spending by our customers and a resulting decline in our revenues and profitability.
We may be adversely affected by failure to comply with regulations of governmental agencies or by the adoption of new regulations. United States trade policy, including the imposition of tariffs and the resulting consequences, as well as other political policies in the United States, China, the U.K., and certain European countries, may also impact global trade or create uncertainty impacting our business.
Our products are subject to regulation by governmental agencies. These regulations govern a wide variety of activities relating to our products, including design and development, product safety, labeling, manufacturing, promotion, sales, and distribution. We also operate a global business and are subject to various laws and regulations in the many markets where we do business, including those relating to competition, employment and labor practices, international trade, and corruption. If we fail to comply with these regulations, or if new regulations are adopted that substantially change existing practice or impose new burdens, we may have to recall products and cease their manufacture and distribution. In addition, we could be subject to investigation costs, reputational harm, fines, criminal prosecution, and other damages that could impact our profitability.
Political policy in the United States, China, the U.K., and certain European countries may impact global trade and domestic purchasing or create uncertainty. The United States government has adopted a new approach to trade policy and in certain cases has sought to renegotiate, or possibly terminate, certain existing trade agreements. The United States government has also initiated tariffs on certain foreign goods, particularly those produced in China. As a result, certain foreign governments, including the Chinese government, have imposed retaliatory tariffs on goods that their countries import from the United States. Certain governments also have implemented domestic purchasing requirements that could favor local competition and result in reduced sales.
22
Table of Contents
These various trade policy and regulatory actions described above may restrict our access to lower-cost countries in certain circumstances or otherwise create uncertainty, negatively impact global markets, and make it more difficult or costly for us to import our products into certain countries. The adoption and expansion of trade restrictions or other governmental action related to tariffs or trade agreements or policies could also lead to an economic downturn and/or could create unfavorable fluctuations in currency exchange rates (see above description "Currency fluctuations affect our operating profits."). In times of uncertainty, some customers delay investments or defer normal replacement cycles, which could have an adverse impact on our sales. The adoption and expansion of trade restrictions or other governmental action related to tariffs or trade agreements or policies have the potential to adversely impact our business and financial performance.
The United Kingdom’s withdrawal from the European Union could adversely impact our results of operations.
On January 31, 2020, the U.K. formally left the E.U. (commonly referred to as Brexit). After a transition period, on December 24, 2020, the U.K. and E.U. agreed to a trade deal (the Trade and Cooperation Agreement), which was ratified by the U.K. on December 30, 2020. This Trade and Cooperation Agreement came into effect on May 1, 2021 after it was ratified by both the European Parliament and Council of the European Union. The Trade and Cooperation Agreement allows the U.K. and E.U. to continue trading without tariffs or quotas; however, the movement of goods between the U.K. and the remaining member states of the E.U. may be subject to additional inspections and documentation checks, leading to possible delays at ports of entry and departure.
In addition, there are still a number of areas of uncertainty in connection with the future of the U.K. and its relationship with the E.U. and the application and interpretation of the Trade and Cooperation Agreement, and Brexit-related matters may take several years to be clarified and resolved. In particular, the Trade and Cooperation Agreement only covers the trade of goods and, therefore, uncertainty remains over the U.K.'s long-term trading of services relationship with the E.U. At this time, we cannot predict the potential impact of Brexit on our business. However, Brexit could adversely affect our operating results and financial condition.
If we cannot protect our intellectual property rights, or if we infringe or misappropriate the proprietary rights of others, our operating results could be harmed.
Our success depends on our ability to obtain, maintain, and enforce patents on our technology, maintain our trademarks, and protect our trade secrets. Our patents may not provide complete protection or may expire, and competitors may develop similar products that are not covered by our patents. Our patents may also be challenged by third parties and invalidated or narrowed. We may experience a decline in sales and/or profitability if any of these things occur. Competitors sometimes seek to take advantage of our trademarks or brands in ways that may create customer confusion or weaken our brand. Improper use or disclosure of our trade secrets may still occur.
We may be sued for infringing on the intellectual property rights of others. The cost of any litigation could affect our profitability regardless of the outcome, and management attention could be diverted. If we are unsuccessful in such litigation, we may have to pay damages, stop the infringing activity, and/or obtain a license. If we fail to obtain a required license, we may be unable to sell some of our products, which could result in a decline in our revenues.
We may be adversely affected by environmental laws and regulations.
We are subject to various environmental laws and regulations and incur expenditures in complying with environmental laws and regulations. We have corporate programs in place to manage compliance and stakeholder expectations related to environmental matters, but increasing public interest in climate change
23
Table of Contents
topics may result in the enactment of additional governmental laws and regulations related to this subject area. We are currently involved in, or have potential liability with respect to, the remediation of past contamination in various facilities. In addition, some of our facilities are or have been in operation for many decades and may have used substances or generated and disposed of wastes that are hazardous or may be considered hazardous in the future. These sites and disposal sites owned by others to which we sent waste may in the future be identified as contaminated and require remediation. Accordingly, it is possible that we could become subject to additional environmental liabilities in the future that may harm our results of operations or financial condition.
We may be adversely affected by regulations and market expectations related to sourcing and our supply chain, including conflict minerals.
The SEC has adopted disclosures and reporting requirements for companies whose products contain certain minerals and their derivatives, namely tin, tantalum, tungsten, or gold, known as conflict minerals. Companies must report annually whether or not such minerals originate from the Democratic Republic of Congo (DRC) and adjoining countries. These requirements could adversely affect the sourcing, availability, and pricing of materials used in the manufacturing of our products. In addition, we have incurred additional costs to comply with the disclosure requirements, including cost related to determining the source of any of the relevant minerals used in our products. Since our supply chain is complex, due diligence procedures we have implemented to understand the origins of the minerals we use in our operations may not enable us to ascertain with sufficient certainty the origins for these minerals or determine that these minerals are DRC conflict free, which may harm our reputation. We may also face difficulties in satisfying customers and other stakeholders who may require that our products be certified as DRC conflict free, which could harm our relationships with these customers and/or lead to a loss of revenue. These requirements also could have the effect of limiting the pool of suppliers from which we source these minerals, and we may be unable to obtain conflict-free minerals at prices similar to the past, which could increase our costs and adversely affect our manufacturing operations and our profitability.
Future laws, regulations, or customers may make additional demands on supply chain transparency. These demands can include more transparency into the activities of our suppliers with regard to human rights and sustainable sourcing. We have significant protections in place to ensure we partner with responsible suppliers, but increased demands may cause us to incur increased supply chain costs. If we cannot satisfy customers’ demands, we may lose business, and if we cannot meet new regulatory requirements, we may have to alter our sourcing at increased expense.
Our ability to generate and repatriate cash depends in part on factors beyond our control.
Our ability to make payments on our debt and to fund our share repurchase program, planned capital expenditures, and research and development efforts depends on our ability to generate and repatriate cash in the future. This is subject to factors beyond our control, including general economic, financial, competitive, legislative, regulatory, governmental, and other factors described in this section.
We cannot ensure that our business will generate sufficient cash flows from operations or that future borrowings will be available to us under our credit facility in an amount sufficient to enable us to pay our debt or to fund our other liquidity needs. We may need to refinance all or a portion of our indebtedness on or before maturity. We cannot ensure that we will be able to refinance any of our debt, including our credit facility and the senior notes, on commercially reasonable terms or at all.
Our ability to fund our share repurchase program is also dependent on our ability to repatriate our international cash flows. Changes in governmental cash repatriation policies, restrictions, or tax laws could impair our ability to continue our share repurchase program.
24
Table of Contents
Risks Related to Our Debt
We have debt and we may incur substantially more debt, which could affect our ability to meet our debt obligations and may otherwise restrict our activities.
We have debt and we may incur substantial additional debt in the future. As of December 31, 2021, we had total indebtedness of approximately $1.6 billion, net of cash of $98.6 million. Our debt instruments allow us to incur substantial additional indebtedness.
The existence and magnitude of our debt could have important consequences. For example, it could make it more difficult for us to satisfy our obligations under our debt instruments; require us to dedicate a substantial portion of our cash flow to payments on our indebtedness, which would reduce the amount of cash flow available to fund working capital, capital expenditures, product development, and other corporate requirements; increase our vulnerability to general adverse economic and industry conditions, including changes in raw material costs; limit our ability to respond to business opportunities; limit our ability to borrow additional funds, which may be necessary; and subject us to financial and other restrictive covenants, which, if we fail to comply with these covenants and our failure is not waived or cured, could result in an event of default under our debt instruments.
The agreements governing our debt impose restrictions on our business.
The note purchase agreements governing our notes and the agreements governing our credit facility contain covenants imposing various restrictions on our business. These restrictions may affect our ability to operate our business and may limit our ability to take advantage of potential business opportunities. The restrictions these covenants place on us include limitations on our ability to incur liens and consolidate, merge, sell, or lease all or substantially all of our assets. Our credit facility and the note purchase agreements governing our senior notes also require us to meet certain financial ratios.
Our ability to comply with these agreements may be affected by events beyond our control, including economic, financial, and industry conditions. The breach of any covenants or restrictions could result in a default under the note purchase agreements governing the senior notes and/or under our credit facility. An event of default under the agreements governing our debt would permit holders of our debt to declare all amounts owed to them under such agreements to be immediately due and payable. Acceleration of our other indebtedness may cause us to be unable to make interest payments on the senior notes and repay the principal amount of the senior notes.
The lenders under our credit agreement may be unable to meet their funding commitments, reducing the amount of our borrowing capacity.
We have a revolving credit facility outstanding under which the Company and certain of its subsidiaries may borrow up to $1.25 billion. Our credit facility is provided by a group of 14 financial institutions, which individually have between 4% and 11% of the total funding commitment. At December 31, 2021, we had borrowings of $601.0 million outstanding under our credit facility. Our ability to borrow further funds under our credit facility is subject to the various lenders’ financial condition and ability to make funds available. Even though the financial institutions are contractually obligated to lend funds, if one or more of the lenders encounters financial difficulties or goes bankrupt, such lenders may be unable to meet their obligations. This could result in us being unable to borrow the full $1.25 billion amount available.
We are subject to risks associated with the discontinuation of LIBOR.
The U.K. Financial Conduct Authority announced in 2017 that it intended to phase out the London Interbank Offered Rate (LIBOR) by the end of 2021. On November 30, 2020, to facilitate an orderly LIBOR transition, the Office of the Comptroller of the Currency, the Federal Deposit Insurance
25
Table of Contents
Corporation, and the Board of Governors of the Federal Reserve jointly announced that entering into new contracts using LIBOR as a reference rate after December 31, 2021 would create a safety and soundness risk. On March 5, 2021, the Financial Conduct Authority announced that all LIBOR benchmarks will either no longer be provided by any administrator or no longer be representative after December 31, 2021 in the case of one-week and two-month U.S. dollar LIBOR, and after June 30, 2023 in the case of the remaining U.S. dollar LIBOR benchmarks. As mentioned in Note 2 to the consolidated financial statements, our current interest rate swap, cross currency swap, and credit agreements include fallback protocols when LIBOR is discontinued. Changes in the method of calculating LIBOR, or the replacement of LIBOR with an alternative rate or benchmark, may adversely affect interest rates and could result in higher borrowing costs. In addition, if changes are made to the method of calculating LIBOR or LIBOR ceases to exist, we may need to amend certain contracts, including our credit facility and swap arrangements, and we cannot predict what alternative rate or benchmark would be negotiated. This may also result in an increase in our interest expense.
General Risk Factors
We make forward-looking statements, and actual events or results may differ materially from these statements because assumptions we have made prove incorrect due to market conditions in our industries or other factors.
We provide forward-looking statements both in our filings with the SEC and orally in connection with our quarterly earnings calls, including guidance on anticipated sales growth and earnings per share. You should not rely on forward-looking statements to predict our actual results. Our actual results or performance may be materially different than reflected in forward-looking statements because of various risks and uncertainties.
Our forward-looking statements may not be accurate or complete, and we do not intend to update or revise them in light of actual results. New risks also periodically arise. Please consider the risks and factors that could cause our results to differ materially from what is described in our forward-looking statements. See in particular “Factors Affecting Our Future Operating Results” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”
In providing guidance on our future earnings, we evaluate our budgets, strategic plans, and other factors relating to our business. We make assumptions about external factors, including the following:
•the outlook for our end-markets and the global economy;
•the impact of external factors on our competition;
•the financial position of our customers and their willingness to pay for our products and services;
•the estimated costs of purchasing materials;
•the estimated costs of transportation and logistics;
•developments in personnel costs;
•our estimated income tax expense; and
•rates for currency exchange, particularly between the Swiss franc and the euro and between the Chinese renminbi and the U.S. dollar.
Some of these assumptions may prove to be incorrect over time. For example, although no single end-customer accounts for more than 1% of our revenues, if a number of our customers experienced significant deteriorations in their financial positions concurrently, it could have an impact on our results of operations.
26
Table of Contents
Some of our key internal assumptions include the following:
•our ability to implement our business strategy;
•our ability to implement price increases as forecasted;
•the effectiveness of our sales and marketing programs such as our Spinnaker, market penetration, and Field Turbo initiatives;
•the effectiveness of our programs to improve our service business, including growth, globalization, and productivity initiatives;
•our ability to develop and deliver innovative products and services;
•the continued growth of our sales in emerging markets; and
•the effectiveness of productivity and cost saving initiatives.
These internal assumptions may also prove to be incorrect over time. For example, with respect to our ability to realize our planned price increases without disturbing our customer base in core markets, in certain markets, such as emerging markets, price tends to be a more significant factor in customers’ decisions to purchase our products and services. Furthermore, we can have no assurance that our cost reduction programs will generate adequate cost savings. Additionally, it may become necessary to take additional restructuring actions resulting in additional restructuring costs.
We believe our current assumptions are reasonable and prudent for planning purposes. However, should any of these assumptions prove to be incorrect, or should we incur lower-than-expected operating performance or cash flows, we may experience results different than our projections.
Item 1B.Unresolved Staff Comments
None.
27
Table of Contents
Item 2.Properties
Our principal executive offices are located in Columbus, Ohio and Greifensee, Switzerland. The following table lists our principal facilities, indicating the location and whether the facility is owned or leased. The properties listed below serve primarily as manufacturing facilities or shared service centers and also typically have a certain amount of space for service, sales and marketing, and administrative activities. The facilities in Giessen, Germany, Viroflay, France, and Salford, United Kingdom are used primarily for sales and marketing. We believe our facilities are adequate for our current and reasonably anticipated future needs.
Location Owned/Leased Business Segment
Europe:
Greifensee/Nänikon, Switzerland Owned Swiss Operations
Urdorf, Switzerland Owned Swiss Operations
Manchester, England Leased Western European Operations
Royston, United Kingdom Owned Western European Operations
Salford, United Kingdom Leased Western European Operations
Viroflay, France Owned Western European Operations
Albstadt, Germany Owned Western European Operations
Giessen, (Hesse) Germany Owned Western European Operations
Giesen, (Lower Saxony) Germany Owned Western European Operations
Warsaw, Poland Leased Other Operations
Americas:
Columbus, Ohio Leased U.S. Operations
Worthington, Ohio (two facilities) Owned U.S. Operations
Oakland, California Owned U.S. Operations
Billerica, Massachusetts Owned U.S. Operations
Tampa, Florida Owned U.S. Operations
Tijuana, Mexico Leased U.S. Operations
Thorofare, New Jersey Owned U.S. Operations
Princeton, New Jersey Leased U.S. Operations
Other:
Shanghai, China (two facilities) Buildings Owned; Chinese Operations
Land Leased
Changzhou, China (two facilities) Buildings Owned; Chinese Operations
Land Leased
ChengDu, China Building Owned; Chinese Operations
Land Leased
Item 3.Legal Proceedings
We are not currently involved in any legal proceeding that we believe could have a material adverse effect upon our financial condition, results of operations, or cash flows. See the disclosure in Item 1 above under “Environmental Matters,” as well as Note 17 to the consolidated financial statements.
Executive Officers of the Registrant
See Part III, Item 10 of this annual report for information about our executive officers.
28
Table of Contents
PART II
Item 5.Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities
Market Information for Common Stock
Our common stock is traded on the New York Stock Exchange under the symbol “MTD.”
Holders
At January 27, 2022, there were 39 holders of record of common stock and 22,805,615 shares of common stock outstanding. We estimate we have approximately 173,699 beneficial owners of common stock.
Dividend Policy
Historically, we have not paid dividends on our common stock. However, we will evaluate this policy on a periodic basis taking into account our results of operations, financial condition, capital requirements including potential acquisitions, our share repurchase program, the taxation of dividends to our shareholders, and other factors deemed relevant by our Board of Directors.
29
Table of Contents
Share Performance Graph
The following graph compares the cumulative total returns (assuming reinvestment of dividends) on $100 invested on December 31, 2016 through December 31, 2021 in our common stock, the Standard & Poor’s 500 Composite Stock Index (S&P 500 Index), and the SIC Code 3826 Index — Laboratory Analytical Instruments.
Comparison of Cumulative Total Return Among Mettler-Toledo International Inc., the S&P 500 Index, and SIC Code 3826 Index — Laboratory Analytical Instruments(a)
(a) The Performance Graph will not be deemed to be incorporated by reference into any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934, except to the extent that the Company specifically incorporates it by reference. In addition, the Performance Graph will not be deemed to be "soliciting material" or to be "filed" with the SEC or subject to Regulation 14A or 14C, other than as provided in Regulation S-K, or to the liabilities of Section 18 of the Securities Exchange Act of 1934, except to the extent that the Company specifically requests that such information be treated as soliciting material or specifically incorporates it by reference into a filing under the Securities Act or the Securities Exchange Act.
30
Table of Contents
Purchases of Equity Securities by the Issuer and Affiliated Purchasers
Issuer Purchases of Equity Securities
Period
In November 2020, the Company’s Board of Directors authorized an additional $2.5 billion to the share repurchase program, which had $2.1 billion of remaining availability as of December 31, 2021. The share repurchases are expected to be funded from cash generated from operating activities, borrowings, and cash balances. Repurchases will be made through open market transactions, and the amount and timing of purchases will depend on business and market conditions, the stock price, trading restrictions, the level of acquisition activity, and other factors.
We have purchased 30.2 million common shares since the inception of the program in 2004 through December 31, 2021, at a total cost of $6.9 billion. During the years ended December 31, 2021 and 2020, we spent $1.0 billion and $775.0 million on the repurchase of 739,486 shares and 815,652 shares at an average price per share of $1,352.27 and $950.14, respectively. We reissued 110,748 shares and 162,176 shares held in treasury for the exercise of stock options and restricted stock units during 2021 and 2020, respectively.
Item 6.Reserved
Item 7.Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion and analysis of our financial condition and results of operations should be read together with our consolidated financial statements.
Changes in local currencies exclude the effect of currency exchange rate fluctuations. Local currency amounts are determined by translating current and previous year consolidated financial information at an index utilizing historical currency exchange rates. We believe local currency information provides a helpful assessment of business performance and a useful measure of results between periods. We do not, nor do we suggest that investors should, consider such non-GAAP financial measures in isolation from, or as a substitute for, financial information prepared in accordance with GAAP. We present non-GAAP financial measures in reporting our financial results to provide investors with an additional analytical tool to evaluate our operating results.
We also include in the discussion below disclosures of immaterial qualitative factors that are not quantified. Although the impact of such factors is not considered material, we believe these disclosures can be useful in evaluating our operating results.
31
Table of Contents
Overview
We operate a global business with sales that are diversified by geographic region, product range, and customer. We hold leading positions worldwide in many of our markets and attribute this leadership to several factors, including the strength of our brand name and reputation, our comprehensive offering of innovative instruments and solutions, our Spinnaker sales and marketing program, and the breadth and quality of our global sales and service network.
Net sales in U.S. dollars increased 21% in 2021 and 3% in 2020. Excluding the effect of currency exchange rate fluctuations, or in local currencies, net sales increased 18% in 2021 and 2% in 2020. In 2021, we experienced broad-based growth with robust customer demand in most businesses and regions as global economies recovered from COVID-19. We also benefited from excellent execution of our sales and marketing programs and effectively navigated supply chain challenges to meet heightened customer demand. Growth in China was particularly strong. We continue to benefit from our strong global leadership positions, diversified customer base, innovative product offering, investment in emerging markets, significant installed base, and the impact of our sophisticated global sales and marketing programs. Examples of these programs include identifying and investing in growth and market penetration opportunities, more effectively pricing our products and services, increasing our sales force effectiveness through improved guidance and redirecting resources to our most promising growth opportunities, increasing digitalization tools, and continuing to optimize our lead generation and lead nurturing processes.
During the past two years, we accelerated our ability to use advanced analytics to identify and pursue growth opportunities, while increasing the effectiveness of our digital tools to support our global sales organization. We have also successfully adapted to remote and hybrid work environments and increased engagement with our customers with our Go-to-Market and digital approaches. While global market conditions are currently favorable, challenges remain in the global supply chain and we will face difficult prior period comparisons in 2022 due to strong results in 2021. Uncertainties and challenges relating to COVID-19 also continue, including new variants (such as Omicron), lockdowns, logistical and inflationary challenges, and the potential impact on global economies, and market conditions may change quickly.
Our laboratory sales experienced excellent growth in 2021, particularly from life sciences and biotech customers, while other end-markets such as the chemical industry experienced a strong recovery. We also continue to support COVID-19 testing, development, treatment, and vaccine production activities in biopharma. We expect to continue to benefit from favorable biopharma market trends. We also believe we will benefit from increased customer demand for automation, digitalization, and safety; new facility investments; and continued focus on regulatory compliance including data integrity requirements. Overall, we believe we are well positioned to continue to capture growth and gain market share in our laboratory business.
Our industrial sales experienced strong growth in 2021 in both core industrial and product inspection. Core industrial experienced particularly strong growth, especially in China and the Americas. We continue to benefit from our strong product offering and focus on the more attractive, faster-growing segments of the market and strong execution of our growth initiatives in each region.We also continue to benefit from market trends in automation and digitalization. Emerging market economies, especially China, have historically been an important source of growth based upon the expansion of their domestic economies, and we expect this to be a continued source of future growth. Our core industrial-related products are also especially sensitive to changes in economic growth. Our product inspection business experienced improved customer demand during 2021 after being negatively impacted by COVID-19 in 2020. We
32
Table of Contents
expect our product inspection end-market to also benefit from our customers’ focus on brand protection, food safety, and productivity.
Our food retailing sales decreased during 2021 primarily due to weak market dynamics, the timing of project activity, and the negative impact of component shortages. Traditionally, the spending levels in this sector have experienced more volatility than our other end-markets due to the timing of customer project activity and new regulations.
In 2022, we will continue to pursue the overall business growth strategies which we have followed in recent years:
Gaining Market Share. Innovation is essential to gaining market share and is fundamental in all aspects of our business including sales and marketing and technology leadership. Our global sales and marketing initiative, Spinnaker, continues to be an important growth strategy. We aim to gain market share by implementing sophisticated sales and marketing programs, leveraging our extensive customer databases, and leveraging our product offering to larger customers through key account management. While this initiative is broad-based, efforts to improve these processes include the use of advanced data analytics to identify, prioritize, and pursue growth opportunities; the implementation of more effective pricing and value-based selling strategies and processes; improved sales force guidance, training and effectiveness; cross-selling; increased segment marketing; and leads generation and nurturing activities. We have also added field sales and service resources to pursue underpenetrated market opportunities and will make additional investments to front-end resources in 2022. We also continue to adapt our Go-to-Market approaches with additional inside and telesales resources, while also increasing digital customer interaction. We continue to benefit from digitalization tools to gain efficiencies and increase the effectiveness of our field sales force. In addition, our comprehensive service offerings, and our initiatives to globalize and harmonize these offerings, help us further penetrate developed markets. We estimate that we have the largest installed base of weighing instruments in the world, and we continue to leverage advanced data analytics and invest in sales and marketing activities to increase the proportion of our installed base that is under service contract, or sell new products that replace old products in our installed base. In addition to traditional repair and maintenance, our service offerings continue to expand into value-added services for a range of market needs, including regulatory compliance. We have also made adjustments to our service model to incorporate remote service, depot drop-off/pickup, and other approaches to ensure the safety of our technicians and customers.
Expanding Emerging Markets. Emerging markets, comprising Asia (excluding Japan), Eastern Europe, Latin America, the Middle East, and Africa, account for approximately 36% of our total net sales. We have a two-pronged strategy in emerging markets: first, to capitalize on long-term growth opportunities in these markets, and second, to leverage our low-cost manufacturing operations in China. We have nearly a 35-year track record in China, and our sales in Asia have grown more than 13% on a compound annual growth basis in local currencies since 1999. Over the years, we have also broadened our product offering to the Asian markets. India has also been a source of emerging market sales growth in past years due to increased life science research activities. Overall, versus the prior year, we experienced a 20% increase in emerging market local currency sales by destination during 2021, which included 25% local currency sales growth in China. Within China, we continue to redeploy resources and sales and marketing efforts to the faster-growing segments of pharma, food manufacturing, chemical, and environment. We believe the long-term growth of these segments will be favorably impacted by the Chinese government’s emphasis on science, high-value industries, product quality, and food safety. We expect our laboratory and product inspection businesses will particularly benefit from our focus on these segments. We also continue to invest and add sales and marketing resources to pursue growth in under-penetrated emerging markets. However, emerging market sales can be volatile. In particular, China has historically been volatile and market conditions may change unfavorably due to various factors.
33
Table of Contents
Extending Our Technology Lead. We continue to focus on product innovation. In the last three years, we spent approximately 5% of net sales on research and development. We seek to improve our product offerings and their capabilities with additional integrated technologies and software, which we believe supports our pricing differentiation and accelerates product replacement cycles. In addition, we aim to create value for our customers by having thorough knowledge of their processes via our significant installed product base.
Expanding Our Margins. During 2021, we experienced increased inflation in our cost structure, particularly regarding material product costs and transportation and logistics, and we expect our cost structure to further increase in 2022 due to these inflationary dynamics. However, despite these challenges to our cost structure, we continue to strive to improve our margins by more effectively pricing our products and services, optimizing our cost structure, and improving our mix in higher-margin businesses such as service. For example, sophisticated data analytic tools provide us new insights to further refine our price strategies and processes. We also focus on reallocating resources and better aligning our cost structure to support our investments in market penetration initiatives, higher-growth/profitable areas, and opportunities for margin improvement.
We have also initiated various cost reduction programs over the past few years, including temporary cost containment measures during 2020 in response to COVID-19. We have also implemented global procurement and supply chain management programs over the last several years aimed at lowering supply costs, and have increased our focus on these programs with our SternDrive initiative. SternDrive is our global operational excellence program for continuous improvement efforts within our supply chain, manufacturing, and back-office operations. Blue Ocean is also an important enabler of our various margin expansion initiatives. Our move to standardized business processes, systems, and data structures throughout our global organization provides greater data transparency and faster access to real-time data. Our cost leadership and productivity initiatives are also focused on continuously improving our invested capital efficiency, such as reducing our working capital levels, improving our order to cash cycle, and ensuring appropriate returns on our expenditures.
Pursuing Strategic Acquisitions. We seek to pursue "bolt-on" acquisitions that may leverage our global sales and service network, respected brand, extensive distribution channels, and technological leadership. We have identified life sciences, process analytics, and product inspection as three key areas for acquisitions. For example, in March 2021, we acquired all the membership interests of Mayfair Technology, LLC (PendoTECH), a manufacturer and distributor of single-use sensors, transmitters, control systems, and software for measuring, monitoring, and data collection primarily in bioprocess applications. PendoTECH serves biopharmaceutical manufacturers and life science laboratories and is located in the United States. The initial cash payment was $185.0 million and we made other post-closing payments of $7.4 million. We may be required to pay additional consideration of up to $20.0 million. In October 2021, we also acquired Scale-up Systems Inc., a leading software provider for scale-up and reaction modeling serving the biopharma and chemical markets. The initial cash payment was $20.2 million and we may be required to pay additional amounts up to EUR 3.0 million.
COVID-19
Since late 2019, the coronavirus pandemic (COVID-19) has spread globally in all countries where we conduct business. The COVID-19 pandemic is evolving and has led to the implementation of various responses, including government-imposed quarantines, stay-at-home orders and lockdowns, travel restrictions, vaccination and testing requirements, and other public health safety measures. These restrictions continue to change as COVID-19 evolves, variants are discovered, and vaccinations are distributed in each country and region. The emergence of the Omicron variant of COVID-19 in late 2021 has presented particular challenges to the global economy given its high level of transmissibility, which
34
Table of Contents
can cause many people to be affected at the same time or over a short period of time, leading to potential disruptions to our business and supply chain.
The health and safety of our employees and business partners have been our highest priority throughout the COVID-19 pandemic, and we have implemented several preventative and protective measures. We also have continued to support our customers with their essential businesses, such as life sciences, food manufacturing, chemicals (e.g., sanitizers, disinfectants, soaps, etc.), food retail, and transportation and logistics.
Our production and logistics facilities are currently operational, and our office-based employees continue to adhere to any applicable jurisdictional stay-at-home orders. Our supply chain is currently facing wide-ranging global challenges, although we have been able to meet delivery requirements of our customers with some interruption. We continue to closely monitor risks associated with our supply chain, including the availability of certain components, material shortages, supplier delays, potential transportation delays, and higher transportation and material costs, which could significantly adversely affect sales and/or profitability in future quarters. We also continue to leverage our digital and remote sales capabilities, and our service organization continues to provide on-site and remote customer support to facilitate uptime, productivity, and regulatory compliance.
COVID-19 presents several risks to our business as further described on page 14 in the Risk Factors section of this Form 10-K. Uncertainties related to COVID-19 and the resulting impact to the global economy continue in most regions of the world, and market conditions can change quickly. The longer-term effects on our business will be influenced by the global economy and any economic implications in different regions of the world.
Results of Operations — Consolidated
Net sales
Net sales were $3.7 billion for the year ended December 31, 2021, compared to $3.1 billion in 2020 and $3.0 billion in 2019. This represents an increase of 21% in 2021 and 3% in 2020 in U.S. dollars and an increase of 18% in 2021 and 2% in 2020 in local currencies. The PendoTECH acquisition contributed 1% to our net sales in 2021. In 2021, we experienced broad-based growth with robust customer demand in most businesses and regions, with particularly strong growth in China. We continue to benefit from the execution of our global sales and marketing programs, our innovative product portfolio, and investments in our field organization, particularly surrounding digital tools and techniques. However, uncertainties and challenges relating to COVID-19 continue, including new variants (such as Omicron), lockdowns, supply chain and inflationary challenges, and the potential impact on global economies, and market conditions may change quickly.
In 2021, our net sales by geographic destination increased in U.S. dollars compared to 2020 by 20% in the Americas, 15% in Europe, and 26% in Asia/Rest of World. In local currencies, our net sales by geographic destination increased in 2021 by 20% in the Americas, 12% in Europe, and 21% in Asia/Rest of World, with 25% growth in China. The PendoTECH acquisition contributed approximately 2% to net sales in the Americas and 1% to net sales in Europe during 2021. A discussion of sales by operating segment is included below.
As described in Note 3 to our consolidated financial statements, our net sales comprise product sales of precision instruments and related services. Service revenues are primarily derived from repair and other services, including regulatory compliance qualification, calibration, certification, preventative maintenance, and spare parts.
35
Table of Contents
Net sales of products increased 23% in U.S. dollars and 20% in local currencies during 2021 and increased 2% in both U.S. dollars and in local currencies in 2020. The PendoTECH acquisition contributed approximately 1% to our net sales of products during 2021. Service revenue (including spare parts) increased 11% in U.S. dollars and 8% in local currencies in 2021 and increased 3% in U.S. dollars and 2% in local currencies in 2020.
Net sales of our laboratory products and services, which represented approximately 56% of our total net sales in 2021, increased 25% in U.S. dollars and 22% in local currencies during 2021. The local currency increase in net sales of our laboratory-related products during 2021 includes very strong growth in most product categories, especially in pipettes and process analytics. Net sales of our laboratory products also benefited approximately 2% from the PendoTECH acquisition.
Net sales of our industrial products and services, which represented approximately 39% of our total net sales in 2021, increased 18% in U.S. dollars and 15% in local currencies during 2021. The local currency increase in net sales of our industrial-related products during 2021 includes strong growth in most product categories, with particularly strong growth in core industrial, especially in China and the Americas.
Net sales of our food retailing products and services, which represented approximately 5% of our total net sales in 2021, decreased 3% in U.S. dollars and 6% in local currencies during 2021. The decline in food retailing is primarily due to weak market dynamics, the timing of project activity, and the negative impact of component shortages.
Gross profit
Gross profit as a percentage of net sales was 58.4% for both 2021 and 2020 and 57.9% for 2019.
Gross profit as a percentage of net sales for products was 60.1% for 2021, compared to 60.3% for 2020 and 60.4% for 2019. Gross profit as a percentage of net sales for services (including spare parts) was 51.8% for 2021, compared to 51.6% for 2020 and 49.0% for 2019.
The gross profit as a percentage of net sales for 2021 reflects increased sales volume and favorable price realization, offset by higher material and transportation costs in 2021 and temporary cost savings in 2020.
Research and development and selling, general, and administrative expenses
Research and development expenses as a percentage of net sales were 4.6% for 2021, 4.5% for 2020, and 4.8% for 2019. Research and development expenses in U.S. dollars increased 21% in 2021 and decreased 3% in 2020, and in local currencies increased 17% in 2021 and decreased 5% in 2020. The increase during 2021 primarily relates to increased project activity and temporary savings in the prior year.
Selling, general, and administrative expenses as a percentage of net sales were 25.4% for 2021, compared to 26.6% for 2020 and 27.2% for 2019. Selling, general, and administrative expenses increased 15% in U.S. dollars and increased 12% in local currencies in 2021 and were flat in U.S. dollars and decreased 1% in local currencies in 2020. The increase during 2021 primarily includes higher cash incentive expense, temporary savings in the prior year, and increased sales and marketing investments.
Amortization expense
Amortization expense was $63.1 million in 2021, compared to $56.7 million and $49.7 million in 2020 and 2019, respectively. The increase in amortization expense primarily includes intangible assets related to the PendoTECH acquisition, as well as our investments in information technology, including our Blue Ocean program.
36
Table of Contents
Restructuring charges
During the past few years, we initiated various cost reduction measures. Restructuring charges were $5.2 million in 2021, compared to $10.5 million and $15.8 million in 2020 and 2019, respectively. Restructuring expenses are primarily comprised of employee-related costs.
Other charges (income), net
Other charges (income), net consisted of net income of $3.1 million, $13.8 million, and $6.2 million in 2021, 2020, and 2019, respectively. Other charges (income), net includes non-service pension costs (benefits), net (gains) losses from foreign currency transactions and hedging activities, interest income, and other items. Non-service pension benefits were $11.4 million, $12.2 million, and $4.8 million in 2021, 2020, and 2019, respectively. Other charges (income), net also includes $3.4 million of acquisition costs for the year ended December 31, 2021, as well as a $6.8 million charge to increase the PendoTECH acquisition contingent consideration and related obligations to the sellers.
Interest expense and taxes
Interest expense was $43.2 million for 2021, compared to $38.6 million for 2020 and $37.4 million for2019.
Our reported tax rate was 19% during 2021, compared to 19.5% and 17.7% during 2020 and 2019, respectively. The 2019 reported tax rate includes a net benefit of $15.8 million associated with Swiss tax reform described below.
In May 2019, a public referendum was held in Switzerland that approved Swiss federal tax reform proposals previously approved by the Swiss Parliament. Additional changes in Swiss cantonal law were enacted in October 2019. The changes in Swiss federal tax had an immaterial effect on our financial statements. We recognized a discrete non-cash net deferred tax benefit of $15.8 million as a result of the enactment of the cantonal law in the fourth quarter of 2019. A further description of Swiss tax reform is in Note 14 to our consolidated financial statements.
Results of Operations — by Operating Segment
The following is a discussion of the financial results of our operating segments. We currently have five reportable segments: U.S. Operations, Swiss Operations, Western European Operations, Chinese Operations, and Other. A more detailed description of these segments is outlined in Note 18 to our consolidated financial statements.
U.S. Operations (amounts in thousands)
Total net sales increased 21% in 2021 and 2% in 2020 and net sales to external customers increased 20% in 2021 and 1% in 2020. The increase during 2021 is driven by very strong growth in most product categories, especially laboratory and core industrial. These results were partially offset by a significant decline in food retailing that was impacted by weak market dynamics, the timing of customer project
37
Table of Contents
activity, and component shortages. Net sales to external customers in our U.S. Operations also benefited approximately 3% from the PendoTECH acquisition.
Segment profit increased $57.2 million in our U.S. Operations segment during 2021, compared to an increase of $34.8 million during 2020. The segment profit increase in 2021 includes higher sales volume and benefits from our margin expansion initiatives, offset in part by higher transportation and material costs and temporary cost savings in the prior year.
Swiss Operations (amounts in thousands)
(1)Represents U.S. dollar growth.
Total net sales in U.S. dollars increased 21% in 2021 and 3% in 2020, and in local currencies increased 19% in 2021 and decreased 2% in 2020. Net sales to external customers in U.S. dollars increased 19% in 2021 and increased 3% in 2020, and in local currencies increased 17% in 2021 and decreased 1% in 2020. Local currency net sales to external customers during 2021 includes strong growth in most product categories.
Segment profit increased $55.7 million in our Swiss Operations segment during 2021, compared to an increase of $12.2 million during 2020. The segment profit increase in 2021 includes higher sales volume, benefits from our productivity initiatives, and favorable foreign currency translation, offset in part by higher transportation and material costs and temporary cost savings in the prior year.
Western European Operations (amounts in thousands)
(1)Represents U.S. dollar growth.
Total net sales in U.S. dollars increased 17% in 2021 and 2% in 2020, and in local currencies increased 12% in 2021 and decreased 1% in 2020. Net sales to external customers in U.S. dollars increased 16% in 2021 and increased 2% in 2020, and in local currencies increased 12% in 2021 and were flat in 2020. Local currency net sales to external customers during 2021 includes strong growth in most product categories, especially in laboratory-related products.
Segment profit increased $24.7 million in our Western European Operations segment during 2021, compared to an increase of $23.7 million in 2020. The segment profit increase in 2021 is primarily due to higher sales volume, benefits from our margin expansion initiatives, and favorable currency translation, offset in part by higher transportation and material costs and temporary cost savings in the prior year.
38
Table of Contents
Chinese Operations (amounts in thousands)
(1)Represents U.S. dollar growth.
Total net sales in U.S. dollars increased 34% in 2021 and increased 3% in 2020, and in local currencies increased 26% in 2021 and 3% in 2020. Net sales by origin to external customers in U.S. dollars increased 33% in 2021 and 6% in 2020, and in local currencies increased 25% in 2021 and 6% in 2020. The increase in net sales to external customers during 2021 reflects particularly strong growth in both laboratory and industrial products. However, market conditions may change quickly and we will face difficult prior period comparisons in 2022.
Segment profit increased $99.3 million in our Chinese Operations segment during 2021, compared to an increase of $4.0 million in 2020. The increase in segment profit during 2021 primarily reflects increased sales volume, benefits from our margin expansion initiatives, and favorable foreign currency translation, offset in part by higher transportation and material costs and temporary cost savings in the prior year.
Other (amounts in thousands)
(1)Represents U.S. dollar growth.
Other includes reporting units in Southeast Asia, Latin America, Eastern Europe, and other countries. Net sales to external customers in U.S. dollars increased 14% in 2021 and 1% in 2020, and in local currencies increased 12% in 2021 and 2% in 2020. The increase in local currency growth in net sales to external customers during 2021 includes strong growth in most product categories.
Segment profit increased $22.1 million in our Other segment during 2021, compared to an increase of $6.4 million during 2020. The increase in segment profit during 2021 primarily relates to increased sales volume and favorable foreign currency translation.
Liquidity, Capital Resources, and Future Cash Requirements
Liquidity is our ability to generate sufficient cash to meet our obligations and commitments. Sources of liquidity include cash flows from operating activities, available borrowings under our Credit Agreement, the ability to obtain appropriate financing, and our cash and cash equivalent balances. Currently, our financing requirements are primarily driven by working capital requirements, capital expenditures, share repurchases, and acquisitions. Global market conditions can be uncertain, and our ability to generate cash flows could be reduced by a deterioration in global markets.
We currently believe that cash flows from operating activities, together with liquidity available under our Credit Agreement, local working capital facilities, and cash balances, will be sufficient to fund currently anticipated working capital needs and spending requirements for at least the foreseeable future.
39
Table of Contents
Cash provided by operating activities totaled $908.8 million in 2021, compared to $724.7 million in 2020 and $603.5 million in 2019. The increase in 2021 is primarily due to higher net earnings.
Capital expenditures are made primarily for investments in information systems and technology, machinery, equipment, and the purchase and expansion of facilities. Our capital expenditures totaled $107.6 million in 2021, $92.5 million in 2020, and $97.3 million in 2019. Capital expenditures are expected to increase in 2022 similarly as we experienced in 2021, subject to business and economic conditions.
In September 2021, the Company entered into an agreement with the U.S. Department of Defense to increase domestic production capacity of pipette tips and enhance manufacturing automation and logistics. The Company will receive funding of $35.8 million over the next two years, which will offset future capital expenditures.
We continue to explore potential acquisitions. In connection with any acquisition, we may incur additional indebtedness. In March 2021, we acquired all the membership interests of Mayfair Technology, LLC (PendoTECH), a manufacturer and distributor of single-use sensors, transmitters, control systems, and software for measuring, monitoring, and data collection primarily in bioprocess applications. PendoTECH serves biopharmaceutical manufacturers and life science laboratories and is located in the United States. The initial cash payment was $185.0 million and we made other post-closing payments of $7.4 million. We may be required to pay additional consideration of up to $20.0 million. In October 2021, the Company acquired Scale-up Systems Inc., a leading software provider for scale-up and reaction modeling serving the biopharma and chemical markets. The initial cash payment was $20.2 million and the Company may be required to pay additional amounts up to EUR 3.0 million. For additional information related to these acquisitions, refer to Note 4 to the consolidated financial statements.
In 2021, 2020, and 2019, we also incurred additional acquisition payments totaling $8.3 million, $6.2 million, and $2.0 million, respectively.
Cash flows used in financing activities during 2021 primarily comprised share repurchases. In accordance with our share repurchase program, we spent $1.0 billion in 2021 and $775 million in both 2020 and 2019 on the repurchase of 739,486 shares, 815,652 shares, and 1,094,648 shares, respectively. Our share repurchase program does not obligate us to acquire any specific number of shares; however, in 2022, we intend to spend a similar amount on the repurchase of shares as we spent in 2021, subject to business and economic conditions.
We plan to continue to repatriate earnings from China, Switzerland, Germany, the United Kingdom, and certain other countries in future years and expect the only additional cost associated with the repatriation of such foreign earnings will be withholding taxes. All other undistributed earnings are considered to be permanently reinvested. We believe the ongoing tax impact associated with repatriating our undistributed foreign earnings will not have a material effect on our liquidity.
40
Table of Contents
Senior Notes and Credit Facility Agreement
Our short-term borrowings and long-term debt consisted of the following at December 31, 2021:
U.S. Dollar Other PrincipalTrading Currencies Total
Senior Notes debt issuance costs, net (2,546) (1,569) (4,115)
(1) See Note 6 and Note 7 to our consolidated financial statements for additional disclosures on the financial instruments associated with the Credit Agreement.
As of December 31, 2021, approximately $649.0 million of additional borrowings were available under our Credit Agreement and we maintained $98.6 million of cash and cash equivalents. We expect to make interest payments of approximately $50 million during 2022 associated with our debt outstanding as of December 31, 2021.
Changes in exchange rates between the currencies in which we generate cash flow and the currencies in which our borrowings are denominated affect our liquidity. In addition, because we borrow in a variety of currencies, our debt balances fluctuate due to changes in exchange rates. Further, we do not have any downgrade triggers from rating agencies that would accelerate the maturity dates of our debt. We were in compliance with our debt covenants as of December 31, 2021.
Senior Notes
The Senior Notes listed above are senior unsecured obligations and interest is payable semi-annually. The Senior Notes each contain customary affirmative and negative covenants as further described in Note 10 to our consolidated financial statements.
In December 2021, we entered into an agreement to issue and sell $300 million 15-year Senior Notes in a private placement. We will issue $150 million with a fixed interest rate of 2.81% (2.81% Senior Notes) in March 2022, which will mature in March 2037, and we will issue $150 million with a fixed interest rate of 2.91% (2.91% Senior Notes) in September 2022, which will mature in September 2037. We will use the proceeds from the sale of the notes to refinance existing indebtedness and for other general corporate purposes.
In May 2021, we entered into an agreement to issue and sell $125 million 12-year Senior Notes with a fixed interest rate of 2.83%. The Senior Notes were issued in July 2021 and will mature in July 2033.
41
Table of Contents
We used the proceeds from the sale of the notes to refinance existing indebtedness and for other general corporate purposes.
Credit Agreement
On June 25, 2021, we entered into a $1.25 billion Credit Agreement (the Credit Agreement), which amended our $1.1 billion Amended and Restated Credit Agreement (the Prior Credit Agreement), which is further described in Note 10 to our consolidated financial statements.
Other Local Arrangements
In April 2018, two of our non-U.S. pension plans issued loans totaling $39.6 million (Swiss franc 38 million) to a wholly-owned subsidiary of the Company. The loans have the same terms and conditions, which include an interest rate of Swiss franc LIBOR plus 87.5 basis points. The loans were renewed for one year in April 2021.
Share Repurchase Program
In November 2020, the Company’s Board of Directors authorized an additional $2.5 billion to the share repurchase program which has $2.1 billion of remaining availability as of December 31, 2021. The share repurchases are expected to be funded from cash generated from operating activities, borrowings, and cash balances. Repurchases will be made through open market transactions, and the amount and timing of purchases will depend on business and market conditions, the stock price, trading restrictions, the level of acquisition activity, and other factors.
We have purchased 30.2 million common shares since the inception of the program in 2004 through December 31, 2021, at a total cost of $6.9 billion. During the years ended December 31, 2021 and 2020, we spent $1.0 billion and $775.0 million on the repurchase of 739,486 shares and 815,652 shares at an average price per share of $1,352.27 and $950.14, respectively. We reissued 110,748 shares and 162,176 shares held in treasury for the exercise of stock options and restricted stock units during 2021 and 2020, respectively.
Effect of Currency on Results of Operations
Our earnings are affected by changing exchange rates. We are particularly sensitive to changes in the exchange rates between the Swiss franc, euro, Chinese renminbi, and U.S. dollar. We have more Swiss franc expenses than we do Swiss franc sales because we develop and manufacture products in Switzerland that we sell globally and have a number of corporate functions located in Switzerland. When the Swiss franc strengthens against our other trading currencies, particularly the U.S. dollar and euro, our earnings go down. We also have significantly more sales in the euro than we do expenses. When the euro weakens against the U.S. dollar and Swiss franc, our earnings also go down. We estimate a 1% strengthening of the Swiss franc against the euro would reduce our earnings before tax by approximately $1.9 million to $2.1 million annually.
We also conduct business throughout the world, including Asia Pacific, the United Kingdom, Eastern Europe, Latin America, and Canada. Fluctuations in these currency exchange rates against the U.S. dollar can also affect our operating results. The most significant of these currency exposures is the Chinese renminbi. The impact on our earnings before tax of the Chinese renminbi weakening 1% against the U.S. dollar is a reduction of approximately $2.9 million to $3.1 million annually.
In addition to the effects of exchange rate movements on operating profits, our debt levels can fluctuate due to changes in exchange rates, particularly between the U.S. dollar, the Swiss franc, and euro. Based on our outstanding debt at December 31, 2021, we estimate that a 5% weakening of the U.S. dollar
42
Table of Contents
against the currencies in which our debt is denominated would result in an increase of $34.3 million in the reported U.S. dollar value of our debt.
Taxes
We are subject to taxation in many jurisdictions throughout the world. Our effective tax rate and tax liability will be affected by a number of factors, such as changes in law, the amount of taxable income in particular jurisdictions, the tax rates in such jurisdictions, tax treaties between jurisdictions, the extent to which we transfer funds between jurisdictions, and earnings repatriations between jurisdictions. Generally, the tax liability for each taxpayer within the Mettler-Toledo International Inc. group of companies is determined either (i) on a non-consolidated/non-combined basis or (ii) on a consolidated/combined basis only with other eligible entities subject to tax in the same jurisdiction, in either case without regard to the taxable losses of non-consolidated/non-combined affiliated legal entities.
Environmental Matters
We are subject to environmental laws and regulations in the jurisdictions in which we operate. We own or lease a number of properties and manufacturing facilities around the world. Like many of our competitors, we have incurred, and will continue to incur, capital and operating expenditures and other costs in complying with such laws and regulations.
We are currently involved in, or have potential liability with respect to, the remediation of past contamination in certain of our facilities. A former subsidiary of Mettler-Toledo, LLC known as Hi-Speed Checkweigher Co., Inc. was one of two private parties ordered by the New Jersey Department of Environmental Protection, in an administrative consent order signed on June 13, 1988, to investigate and remediate certain ground water contamination at a property in Landing, New Jersey. After the other party under this order failed to fulfill its obligations, Hi-Speed became solely responsible for compliance with the order. Residual ground water contamination at this site is now within a Classification Exception Area which the Department of Environmental Protection has approved and within which the Company oversees monitoring of the decay of contaminants of concern. A concurrent Well Restriction Area also exists for the site. The Department of Environmental Protection does not view these vehicles as remedial measures, but rather as “institutional controls” that must be adequately maintained and periodically evaluated. We estimate that the costs of compliance associated with the site over the next several years will approximate a total of $0.4 million.
In addition, certain of our present and former facilities have or had been in operation for many decades and, over such time, some of these facilities may have used substances or generated and disposed of wastes which are or may be considered hazardous. It is possible that these sites, as well as disposal sites owned by third parties to which we have sent wastes, may in the future be identified and become the subject of remediation. Although we believe that we are in substantial compliance with applicable environmental requirements and, to date, we have not incurred material expenditures in connection with environmental matters, it is possible that we could become subject to additional environmental liabilities in the future that could have a material adverse effect on our financial condition, results of operations, or cash flows.
Inflation
Inflation can affect the costs of goods and services that we use, including raw materials to manufacture our products, as well as transportation and logistical costs. The competitive environment in which we operate limits somewhat our ability to recover higher costs through increased selling prices. Global inflation significantly increased during 2021 related to the COVID-19 economic recovery and associated disruptions in global demand, logistics, and labor markets. These inflationary conditions could have a greater impact on our operating results in future years.
43
Table of Contents
Moreover, there may be differences in inflation rates between countries in which we incur the major portion of our costs and other countries in which we sell products, which may limit our ability to recover increased costs. We remain committed to operations in China, Eastern Europe, India, and Brazil, which have experienced inflationary conditions. To date, these inflationary conditions have not had a material effect on our operating results. However, as our presence in China, Eastern Europe, India, and Brazil increases, these inflationary conditions could have a greater impact on our operating results.
Quantitative and Qualitative Disclosures about Market Risk
We have only limited involvement with derivative financial instruments and do not use them for trading purposes.
We have entered into certain interest rate swap agreements. These contracts are more fully described in Note 6 to our consolidated financial statements. The fair value of these contracts was a net liability of $0.4 million at December 31, 2021. Based on our agreements outstanding at December 31, 2021, a 100-basis-point change in interest rates would result in a change in the net aggregate market value of these instruments of approximately $0.2 million. Any change in fair value would not affect our consolidated statement of operations unless such agreements and the debt they hedge were prematurely settled.
We have entered into certain cross currency swap agreements. The fair value of these contracts was a net liability of $3.4 million at December 31, 2021. Based on our agreements outstanding at December 31, 2021, a 100-basis-point change in interest rates and foreign currency exchange rates would result in a change in the net aggregate market value of these instruments by approximately $4.2 million. Any change in fair value would not affect our consolidated statement of operations unless such agreements and the debt they hedge were prematurely settled.
Critical Accounting Estimates
Management’s discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with U.S. GAAP. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to revenue, income taxes, inventories, goodwill and intangibles, leases, and pensions and other post-retirement benefits. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances. The results form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
We believe the following critical accounting estimates affect our more significant judgments used in the preparation of our consolidated financial statements. For a detailed discussion on the application of these and other accounting policies, see Note 2 to our consolidated financial statements.
44
Table of Contents
Income taxes
Income tax expense, deferred tax assets and liabilities, and reserves for unrecognized tax benefits reflect management’s assessment of estimated future taxes to be paid on items in the consolidated financial statements. We record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. The valuation allowance of $51.1 million as of December 31, 2021 is based on management’s estimates of future taxable income and application of relevant income tax law. In the event we were to determine that we would be able to realize our deferred tax assets in the future in excess of the net recorded amount, an adjustment to the valuation allowance would increase income or equity in the period such determination was made. Likewise, should we determine that we would not be able to realize all or part of the valuation allowance in the future, an adjustment to the net deferred tax asset would be charged to income in the period such determination was made.
We plan to repatriate earnings from China, Switzerland, Germany, the United Kingdom, and certain other countries in future years and expect the additional tax costs associated with the repatriation of such earnings will be non-U.S. withholding taxes, certain state taxes, and U.S. taxes on currency gains, if any. All other undistributed earnings are considered permanently reinvested.
The significant assumptions and estimates described in the preceding paragraphs are important contributors to our ultimate effective tax rate for each year in addition to our income mix from geographical regions. If any of our assumptions or estimates were to change, or should our income mix from our geographical regions change, our effective tax rate could be materially affected. Based on earnings before taxes of $949.4 million for the year ended December 31, 2021, each increase of $9.5 million in tax expense would increase our effective tax rate by 1%.
Employee benefit plans