LRMR US Equity☆

ITEM 1A. RISK FACTORS

You should consider carefully the following risks and uncertainties when reading this Annual Report on Form 10-K, as well as the other information contained herein, including our audited consolidated financial statements and the related notes and the section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operation.” If any of the following risks occur, our business, financial condition and results of operationscould be materially and adversely affected. Although we believe that we have identified and discussed below the key risk factors affecting our business, there may be additional risks and uncertainties that are not presently known or that are not currently believed to be significant that may adversely affect our performance or financial condition. In that event, the trading price of our common stock could decline.

Risks Related to Our Financial Position and Need for Capital

We have incurred significant losses since our inception and anticipate that we will incur continued losses for the foreseeable future.

Since our inception we have devoted substantially all of our resources to the development of CTI-1601. We have incurred significant losses in each year of operation since our inception in 2016. For the years ended December 31, 2022 and 2021, we had net losses of $35.4 million and $50.6 million, respectively, and, as of December 31, 2022, we had an accumulated deficit of $151.6 million and we expect to continue to incur significant expenses and net operating losses ("NOLs") for the foreseeable future.

We have devoted substantially all of our financial resources and efforts to research and development, including non-clinical studies, our clinical development program, the development of manufacturing processes as well as the manufacture of initial lots of clinical trial material. We expect to incur significant losses for the foreseeable future to further develop and commercialize our lead drug candidate, CTI-1601.

We expect that our expenses will increase substantially if and as we:

•

continue clinical development efforts for CTI-1601;

•

seek regulatory and marketing approvals in the United States and in foreign jurisdictions for our product candidates that successfully complete clinical trials, if any;

•

establish sales, marketing, distribution and other commercial infrastructure to commercialize various products for which we may obtain marketing approval, if any;

•

contract for the manufacture of larger quantities of product candidates for clinical development and potentially commercialization;

•

maintain, expand and protect our intellectual property portfolio;

•

hire and retain additional personnel, such as clinical, manufacturing, quality control, regulatory and finance personnel.

•

build out our sales, marketing and distribution infrastructure, assuming CT-1601 is approved for marketing; and

•

experience any delays or encounter issues with any of the above.

We currently have no sales, marketing. medical affairs infrastructure and have no experience in the sales, marketing, or distribution of pharmaceutical products. Assuming CTI-1601 ultimately is approved for marketing in the US and elsewhere, we will need to establish sales and marketing capabilities as well as customer service and support, logistics, and other related functions, or make arrangements with third parties to perform these services;

Net losses and negative cash flows have had, and will continue to have, an adverse effect on our liquidity and potentially the ability for us to raise capital due to our unfavorable operating results.

We have no commercial revenue and may never become profitable.

To date, we have not generated any commercial revenue. Our ability to generate revenue and become profitable depends upon our ability to obtain regulatory approval for, and to successfully commercialize, CTI-1601 or other product candidates that we may develop, in-license or acquire in the future.

32

This will require success in a range of challenging activities, including completing numerous clinical trials of CTI-1601 or any future product candidates, obtaining marketing approval for CTI-1601 and any future product candidates, manufacturing, marketing and selling those products for which we, or any future collaborators or partners, may obtain marketing approval, satisfying any post-marketing requirements and obtaining reimbursement for our products from private insurance and/or government payors. Even if we are able to successfully achieve the above, we do not know what the reimbursement status of CTI-1601 or any other future product candidates will be or when any of these products will generate revenue for us, if at all. We have not generated, and do not expect to generate, any product revenue for the foreseeable future, and expect to continue to incur significant operating losses for the foreseeable future due to the cost of research and development, non-clinical studies and clinical trials and the regulatory approval process for CTI-1601 and any future product candidates.

Our ability to generate revenue from CTI-1601 or any future product candidates also depends on a number of additional factors, including our ability to:

•

successfully complete development activities, including the remaining non-clinical studies and planned clinical trials for our product candidates;

•

complete and submit NDAs and BLAs to the FDA and MAAs to the EMA and obtain regulatory approval for indications for which there is a commercial market;

•

complete and submit applications to, and obtain regulatory approval from, other foreign regulatory authorities;

•

manufacture or have manufactured any approved products in commercial quantities and on commercially reasonable terms;

•

develop a commercial organization, or find suitable partners, to market, sell and distribute approved products in the markets in which we have retained commercialization rights;

•

achieve acceptance among patients, clinicians and advocacy groups for any products we develop;

•

obtain coverage and adequate reimbursement from third parties, including government payors; and

•

set a commercially viable price for any products for which we may receive approval.

Because of the uncertainties and risks associated with these activities, we are unable to accurately predict the timing and amount of increased expenses, and if or when we might achieve or maintain profitability. We and any future collaborators may never succeed in these activities and, even if we do, or any future collaborators do, we may never generate revenues that are large enough for us to achieve profitability. Even if we are able to complete the processes described above, we anticipate incurring significant costs associated with commercializing CTI-1601 or any of our future product candidates. Even if we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods. Our failure to become and remain profitable could decrease the value of our business and could impair our ability to raise capital, maintain our discovery and clinical development efforts, expand our business or continue our operations and may require us to raise additional capital that may dilute the ownership interest of shareholders. A decline in the value of our business could also cause shareholders to lose all or part of their investment.

We need to raise additional funding in order to continue our planned operations. This funding may not be available on acceptable terms, or at all. Failure to obtain this necessary capital when needed would force us to delay, limit or terminate our product development efforts or other operations.

We expect to continue to spend substantial and increasing amounts to conduct clinical trials of CTI-1601 and further research and development activities for CTI-1601, and for any additional product candidates that we may develop, in-license or acquire in the future. In addition, raising funds in the current economic environment may present substantial challenges, and our expenses will increase as we expand, through development, in-license or acquisition, our pipeline of product candidates. If we obtain marketing approval for any of our product candidates, we will likely incur significant commercialization expenses related to product sales, marketing, manufacturing and distribution to the extent that such sales, marketing, manufacturing and distribution are not the responsibility of a future collaborator. Accordingly, we will need to obtain additional funding in connection with our continuing operations.

As of December 31, 2022, our existing cash, cash equivalents and marketable securities were $118.4 million, excluding restricted cash of $1.3 million. This amount will not be sufficient to fund all of the efforts that we plan to

33

undertake or to fund the completion of the development of CTI-1601. Accordingly, we will be required to obtain further funding through public or private equity offerings, debt financings, collaborations and licensing arrangements or other sources. The incurrence of indebtedness would result in increased fixed payment obligations and we may be required to agree to certain restrictive covenants, such as limitations on our ability to incur additional debt, limitations on our ability to acquire, sell or license intellectual property rights and other operating restrictions that could adversely impact our ability to conduct our business. Any additional fundraising efforts may divert our management from their day-to-day activities, which may adversely affect our ability to develop and commercialize our product candidates.

There can be no assurance that we will be able to raise sufficient additional capital on acceptable terms or at all. If such additional financing is not available on satisfactory terms, or is not available in sufficient amounts, or we do not have sufficient authorized shares, we may be required to delay, limit, or eliminate the development of business opportunities and our ability to achieve our business objectives, our competitiveness, and our business, financial condition, and results of operations will be materially adversely affected. We could also be required to seek funds through arrangements with collaborative partners or otherwise at an earlier stage than otherwise would be desirable and we may be required to relinquish rights to some of our technologies or product candidates or otherwise agree to terms unfavorable to us, any of which may have a material adverse effect on our business, operating results, financial condition and prospects. In addition, geopolitical unrest including, for example, the broader impact of the Russian invasion of Ukraine, the possibility that the conflict could expand beyond eastern Europe, and the impact of a possible resurgence of vaccine resistant, more deadly or more contagious variant of COVID-19 or other health crisis or recent liquidity constraints, failures and instability in U.S. and international financial banking systems on the global financial markets may reduce our ability to access capital, which could negatively affect our liquidity.

If we are unable to obtain funding when needed and/or on acceptable terms, we may be required to significantly curtail, delay or discontinue one or more of our research and development programs, the manufacture of clinical and commercial supplies, product portfolio expansion or pre commercialization efforts, which could adversely affect our business prospects, or we may be unable to continue operations.

Raising additional capital may cause dilution to our existing stockholders, restrict our operations or require us to relinquish rights to our technologies, CTI-1601 or other product candidates that we may develop, in-license or acquire in the future.

We may seek additional capital through a combination of private or public equity offerings, debt financings, collaborations and licensing arrangements or other sources. To the extent we raise additional capital through the sale of equity or convertible debt securities, existing ownership interests will be diluted and the terms of such financings may include liquidation or other preferences that adversely affect the rights of existing stockholders. Debt or equity financings may be coupled with an additional equity component, such as warrants to purchase shares, which could also result in dilution of our existing stockholder’s ownership.

If we raise additional funds through strategic partnerships and alliances and licensing arrangements with third parties, we may have to relinquish valuable rights, including future revenue streams, to CTI-1601 or other product candidates that we may develop, in-license or acquire in the future, or grant licenses on terms that are not favorable to us.

Our ability to use our NOLs and certain other tax attributes may be limited.

As of December 31, 2022 we had NOL carryforwards that expire for U.S. federal income tax purposes of $167.4 million, a portion of which begin to expire in 2026. Our net operating losses ("NOLs") could expire unused and be unavailable to offset future income tax liabilities because of their limited duration or because of restrictions under U.S. tax law. NOLs generated in taxable years beginning before January 1, 2018 are permitted to be carried forward for 20 taxable years under applicable U.S. federal income tax law. Under current U.S. federal income tax law, NOLs arising in tax years beginning after December 31, 2020 may not be carried back. Moreover, NOLs generated in taxable years beginning after December 31, 2017 may be carried forward indefinitely. As of December 31, 2022, the Company had federal net operating loss carryforwards that were generated after December 31, 2017 of $128.7 million that do not expire, however these carryforwards are limited to 80% of the taxable income in any one tax period.

In general, under Section 382 of the Internal Revenue Code (the "Code") if a corporation undergoes an “ownership change,” generally defined as a greater than 50% change (by value) in its equity ownership over a three-year period, the corporation’s ability to use its pre-change NOLs and other pre-change tax attributes (such as

34

capitalized research and development costs and research tax credits) to offset its post-change income may be limited. We believe that as a result of our merger with Zafgen, our ability to utilize NOLs acquired in the transaction and our other NOLs is expected to be severely limited by Section 382 of the Code. Additionally, our July 2021 and September 2022 equity transactions could also limit our ability to utilize NOLs in the future. We may also experience ownership changes in the future as a result of subsequent shifts in our stock ownership. As a result, if we earn net taxable income, our ability to use our pre-change NOLs to offset U.S. federal taxable income may be subject to limitations, which could potentially result in increased future tax liability to us. In addition, at the state level, there may be periods during which the use of NOLs is suspended or otherwise limited, which could accelerate or permanently increase state taxes owed and would adversely affect our business, financial condition and results of operations.

Changes in tax laws and regulations may have a material adverse effect on our business, financial condition and results of operations.

New income, sales, use or other tax laws, statutes, rules, regulations or ordinances could be enacted at any time, which could affect the tax treatment of any of our future domestic and foreign earnings. Any new taxes could adversely affect our domestic and international business operations, and our business and financial performance. Further, existing tax laws, statutes, rules, regulations or ordinances could be interpreted, changed, modified or applied adversely to us. For example, under Section 174 of the code, in taxable years beginning after December 31, 2021, expenses that are incurred for research and development in the U.S. are capitalized and amortized, which may have an adverse effect on our cash flow. In addition, it is unclear how these U.S. federal income tax changes will affect state and local taxation. Generally, future changes in applicable U.S. tax laws and regulations, or their interpretation and application could have an adverse effect on our business, financial conditions and results of operations.

Risks Related to Our Product Development and Regulatory Approvals

The FDA has placed a partial clinical hold on CTI-1601 and there is uncertainty as to when, or if, the FDA will lift the partial clinical hold on our CTI-1601 program, if it will allow additional cohorts of the dose exploration study or if it will ever allow further clinical development of CTI-1601.

In May 2021, the FDA placed a clinical hold on our CTI-1601 clinical program after we notified the agency of mortalities at the two highest dose levels of the 26-week NHP toxicology study that was designed to support extended dosing of patients with CTI-1601. This NHP study included four dose groups in addition to vehicle and the mortalities were seen in the two highest dose groups. At the time the hold was placed, we had no interventional clinical trials with patients enrolling or enrolled.

In July 2021, we completed dosing in the NHP toxicology study. Data from the study were collected throughout the second half of 2021 and included in the complete response submitted to the FDA

In February 2022, in response to our complete response to the clinical hold discussed above, the FDA stated that it was maintaining the clinical hold and that additional data were needed to resolve the clinical hold.

We subsequently submitted a request to the FDA for a Type C meeting, which was granted and was held in July 2022. We submitted a complete response to the FDA incorporating additional information requested by the FDA at the meeting as well as information on a proposed dose exploration study in August 2022.

In September 2022, following the Type C meeting and the submission of our complete response, the FDA allowed the 25 mg cohort of a Phase 2, four-week, placebo-controlled, dose exploration trial of CTI-1601 in FA patients to proceed. In connection with this decision, the FDA lifted its full clinical hold on the CTI-1601 clinical development program and imposed a partial hold. We have since initiated the 25 mg cohort of the Phase 2 dose exploration trial. Initiation of the second cohort and/or other clinical trials is contingent on the FDA’s agreement based on its review of the trial's 25 mg cohort data and on review by the trial’s independent data monitoring committee. We anticipate that we will provide an update that will outline the next steps for the clinical trial in the second quarter of 2023 and anticipate reporting top-line data in the second half of 2023

Our business may be adversely affected if the FDA does not lift the partial clinical hold in a timely manner, if it places a full clinical hold on the development of CTI-1601, or, if additional non-clinical or clinical studies are required. This may cause significant delays or expense in developing CTI-1601.

35

Our success is currently dependent upon the success of our lead product candidate, CTI-1601, for which we have completed two Phase 1 clinical trials in patients with FA and are currently conducting a Phase 2 dose exploration study. We cannot be certain that data from the first cohort of our current dose exploration study will provide the FDA with adequate data to allow the CTI-1601 development program to proceed as planned in part or in full, or that we will ultimately be successful with our clinical development or that we will be ever able to obtain regulatory approval for CTI-1601.

We currently have no drug products for sale and our business is currently wholly dependent on our successful clinical development, regulatory approval and commercialization of CTI-1601, our lead product candidate and our only product candidate in clinical development, for which we have completed two Phase 1 clinical trials in patients with FA and are currently working to complete a Phase 2 dose exploration under an FDA partial clinical hold. The study’s first cohort (25 mg ) is proceeding in line with our planned timeline with dosing completed. Additional cohorts and/or other clinical trials are contingent on the review of the study’s 25 mg cohort data by the FDA and the data monitoring committee. We expect to provide an update on the study in the second quarter of 2023 and anticipate reporting top-line data in the second half of 2023.

If our efforts to develop and commercialize CTI-1601 for the treatment of FA are unsuccessful, or we experience significant delays in doing so, our business could also be substantially harmed. The success of CTI-1601 will depend on several factors, including the following:

•

maintaining our IND application with the FDA in order to continue to conduct clinical trials in the United States, including our ability to have the clinical hold lifted by the FDA on a timely basis, if at all;

•

successfully recruiting, enrolling and retaining patients in and completing any clinical trials, if allowed to continue, including trials in pediatric patients;

•

demonstrating safety, tolerability and efficacy profiles that are satisfactory to the FDA, EMA and other comparable regulatory authorities for marketing approval;

•

successfully completing all necessary toxicology studies to support clinical development and regulatory approval for CTI-1601;

•

receiving timely marketing approvals from applicable regulatory authorities;

•

managing the extent and cost of any required post-marketing approval commitments to applicable regulatory authorities;

•

establishing and maintaining arrangements with third-party manufacturers for CTI-1601, including developing, validating and maintaining a commercially viable manufacturing process that is compliant with cGMPs;

•

maintaining and growing an organization of scientists and business people who can develop our product candidates and technology;

•

obtaining, maintaining and protecting our patents, trade secrets and regulatory exclusivity in the United States and other countries;

•

successfully launching commercial sales following any marketing approval, including establishing a specialty sales organization, or successfully partnering with another organization, if applicable;

•

obtaining commercial acceptance of our product candidates, if approved, by patients, the medical community and third-party payors and obtaining and maintaining healthcare coverage and adequate reimbursement;

•

maintaining an acceptable safety profile following any marketing approval; and

•

competing with other therapies.

Many of these factors are outside of our control, including the clinical development and regulatory approval processes, results of non-clinical and toxicology studies and clinical trials, potential threats to our intellectual property rights and the manufacturing, marketing and sales efforts, respectively. The process of obtaining regulatory approval is expensive and time consuming. The FDA and foreign regulatory authorities may never approve CTI-1601 for sale and marketing, and even if CTI-1601 is ultimately approved, regulatory approval may be delayed or

36

limited in the United States or in other jurisdictions. Even if we are authorized to sell and market CTI-1601 in one or more markets, there is no assurance that we will be able to successfully market CTI-1601 or that CTI-1601 will achieve market acceptance sufficient to generate profits. If we are unable to successfully develop and commercialize CTI-1601 due to failure to obtain regulatory approval for CTI-1601, to successfully market CTI-1601, to generate profits from the sale of CTI-1601, or due to other risk factors outlined in this report, it would have material adverse effects on our business, financial condition, and results of operations as CTI-1601 is currently our sole product candidate.

Clinical development is a lengthy and expensive process with an uncertain outcome, and the results of non-clinical studies, toxicology studies or clinical trials may not be predictive of future non-clinical studies, toxicology studies or clinical trial results.

Clinical development is expensive and can take many years to complete, and its outcome is inherently uncertain. We cannot guarantee that any non-clinical studies, toxicology studies or clinical trials will be conducted as planned or completed on schedule, if at all, and failure can occur at any time during the non-clinical study, toxicology study or clinical trial process. Despite promising non-clinical, toxicology or clinical results, any product candidate can unexpectedly fail at any stage of non-clinical, toxicology or clinical development. The historical failure rate for product candidates in our industry is high, especially for products in early stages of development.

The results from non-clinical studies, toxicology studies or clinical trials of a product candidate may not predict the results of later non-clinical or clinical trials of the product candidate, or in clinical trials with different patient populations such as children and adolescents and interim results of a clinical trial are not necessarily indicative of final results. Product candidates in later stages of clinical trials may fail to show the desired safety and efficacy characteristics despite having progressed through non-clinical studies and initial clinical trials. It is not uncommon to observe results in clinical trials that are unexpected based on non-clinical studies and early clinical trials, and many product candidates fail in clinical trials despite very promising early results. Favorable safety and efficacy outcomes in adult clinical trials may not be seen in pediatric clinical trials.

Moreover, current and future non-clinical and clinical data may be susceptible to varying interpretations and analyses. A number of companies in the pharmaceutical and biotechnology industries have suffered significant setbacks in clinical development even after achieving promising results in earlier studies. Furthermore, we cannot provide assurance that we will be able to successfully progress any future non-clinical programs from candidate identification to Phase 1 clinical development. As is typical in candidate development, we have a program of ongoing toxicology studies in animals for CTI-1601 and cannot provide assurance that the findings from such studies or any ongoing or future clinical trials will not adversely affect the clinical development of CTI-1601. For the foregoing reasons, we cannot be certain that our ongoing and planned non-clinical studies and clinical trials will be successful. If non-clinical studies or clinical trials for CTI-1601 or any future product candidates or indications fail to demonstrate safety or efficacy to the satisfaction of the FDA or the equivalent regulatory authorities in other countries, the FDA or equivalent regulatory authority will not approve our product candidates in those and other indications, which could have a material adverse effect on our business, financial condition results of operations and prospects.

We do not know whether any ongoing or future clinical trials for CTI-1601 will be completed on schedule, if at all, as the commencement and completion of clinical trials can be delayed, prevented or terminated for a number of reasons, including as a result of safety concerns, or ambiguous or negative interim results. In addition, a clinical trial may be suspended or terminated by us, the FDA, other regulatory authorities, institutional review boards (IRBs") or ethics committees, an independent data monitoring committee, or safety review committee, overseeing the clinical trial at issue or other regulatory authorities due to a number of factors, including, among others:

•

failure to conduct the clinical trial in accordance with regulatory requirements or our clinical protocols;

•

inspection of the clinical trial operations or trial sites by the FDA, the EMA, or other applicable regulatory authorities that reveals deficiencies or violations that require us to undertake corrective action, including the imposition of a partial clinical hold or a full clinical hold;

•

unforeseen safety issues, including any that could be identified in our prior or future toxicology studies, adverse events or lack of effectiveness;

•

changes in government regulations or administrative actions;

37

•

problems with clinical supply materials;

•

lack of adequate funding to continue the clinical trial;

•

challenges in recruiting and enrolling patients to participate in clinical trials, including the size and nature of the patient population, such as pediatric patients, the proximity of patients to clinical trial sites, eligibility criteria for the clinical trial, the nature of the clinical trial protocol, the availability of approved effective treatments for the relevant disease and competition from FDA-approved therapeutics for FA, other clinical trial programs for similar indications, and the resurgence of vaccine resistant, more deadly or more contagious variants of COVID-19and the efforts to mitigate those effects;

•

difficulties in retaining or recruiting clinical investigators in our ongoing or future clinical trials;

•

difficulties retaining patients who have enrolled in a clinical trial but may be prone to withdraw due to rigors of the clinical trial, perceived lack of efficacy, side effects, screening and monitoring measures, personal issues or loss of interest;

•

severe, serious or unexpected drug-related adverse events experienced by patients in clinical trials;

•

the FDA, the EMA, or other applicable regulatory authorities may disagree with our clinical trial designs, our interpretation of data from clinical trials, or may change the requirements for approval even after it has reviewed and commented on the design for our clinical trials;

•

clinical sites and subjects may deviate from trial protocol or drop out of a trial; and

•

reports from non-clinical studies or clinical testing of other therapies that raise safety or efficacy concerns.

Failures or delays in the completion of our clinical trials could result in increased costs and could delay, prevent or limit our ability to generate revenue and continue our business.

For our lead product candidate CTI-1601, we have completed two Phase 1 clinical trials in patients with FA and are currently conducting the first cohort of a Phase 2, four-week, placebo-controlled, dose exploration trial of CTI-1601 in FA patients. Additional cohorts and/or the initiation of other clinical trials are contingent on agreement by the FDA based on its review of the data from the 25 mg cohort and on review by the study's independent data monitoring committee. We expect to provide an update that will outline the next steps for the study in the second quarter of 2023 and anticipate reporting top-line data in the second half of 2023. We do not know if, or when, the FDA will lift the partial clinical hold on our CTI-1601 program, if it will allow additional cohorts of this dose exploration study or if it will ever allow further clinical development of CTI-1601.

Clinical trials may also be delayed or terminated as a result of safety issues in non-clinical or clinical trials, ambiguous or negative interim results or events outside of our control.

If future clinical trials of CTI-1601 fail or further delays occur in the United States and or other countries, we may not be able to develop and commercialize CTI-1601 and could fail to realize the potential advantages of doing so, and it could materially adversely affect our business, financial condition and results of operations.

In addition, disruptions caused by health crises, such as the recent COVID-19 pandemic may increase the likelihood that we encounter such difficulties or delays in initiating, enrolling, conducting or completing our planned and ongoing clinical trials. Further, FA is a rare disease, there are a limited number of patients in close proximity to clinical trial sites and clinical trial patients may need to travel from other countries to the clinical trial sites in order to participate. In addition, given the limited number of FA patients, the recent approval of a competing therapy for the treatment of FA may make patients less likely to enroll in our clinical trials or less likely to be eligible for our clinical trials. Any inability to successfully initiate or complete clinical trials could result in additional costs to us or impair our ability to generate revenue from product sales. In addition, if we make manufacturing or formulation changes to our product candidates, we may be required to or we may elect to conduct additional studies to bridge our modified product candidates to earlier versions. Clinical trial delays could also shorten any periods during which our products have patent protection and may allow our competitors to bring products to market before we do, which could impair our ability to successfully commercialize our product candidates and may seriously harm our business.

38

We may not be successful in our efforts to identify, discover or acquire additional product candidates.

We currently only have one product candidate CTI-1601 in clinical development, although we have other product candidates in pre-clinical development. Therefore, the success of our business largely depends upon our ability to identify, develop, in-license or acquire and commercialize products targeting rare diseases. We may focus our efforts and resources on potential programs or product candidates that ultimately prove to be unsuccessful. In addition, our research methodology may be unsuccessful in identifying potential product candidates or our potential product candidates may be shown to have harmful side effects or may have other characteristics that may make the products unmarketable or unlikely to receive marketing approval.

Research programs to identify new product candidates require substantial technical, financial and human resources. We may focus our efforts and resources on potential programs or product candidates that ultimately prove to be unsuccessful. If any of these events occur, we may be forced to abandon our development efforts for a program or programs, which would have a material adverse effect on our business, financial condition and results of operations.

We have no marketed proprietary products and have not yet advanced a product candidate beyond Phase 2 clinical trials, which makes it difficult to assess our ability to develop CTI-1601 or any future product candidates and commercialize any resulting products independently.

We have no experience in later stage clinical development, and related regulatory requirements or the commercialization of products. As a result, we have not yet demonstrated our ability to independently and repeatedly conduct clinical development after Phase 1, successfully conduct an international multi-center clinical trial, conduct a pivotal clinical trial, obtain regulatory approval, manufacture drug product on a commercial scale or arrange for a third party to do so on our behalf, and commercialize therapeutic products. We will need to develop such abilities if we are to execute on our business strategy to develop and independently commercialize product candidates for orphan and niche indications. To execute on our business plan for the development of independent programs, we will need to successfully:

•

obtain the FDA's permission to continue with the clinical development of CTI-1601;

•

execute our clinical development plans for product candidates;

•

obtain required regulatory approvals in each jurisdiction in which we will seek to commercialize products;

•

build and maintain appropriate sales, distribution and marketing capabilities;

•

gain market acceptance, including reimbursement, for our future products, if any; and

•

manage our spending as costs and expenses increase due to clinical trials, regulatory approvals and commercialization activities.

If we are unsuccessful in accomplishing these objectives, we will not be able to develop and commercialize any product candidates independently and could fail to realize the potential advantages of doing so, and it would materially adversely affect our business, financial condition and results of operations.

We cannot be certain that we will be able to successfully complete clinical trials for CTI-1601 or any other product candidates.

We have advanced only one product candidate into clinical development, CTI-1601. Our business currently depends primarily on CTI-1601’s successful clinical development, regulatory approval and commercialization. We submitted our IND and it was accepted, permitting the conduct of clinical trials. We completed two Phase 1 clinical trials but, as a result of certain mortalities in a non-clinical study of NHPs, the FDA issued a clinical hold. We responded to the clinical hold in January 2022. Following review of our response, the FDA maintained the clinical hold.

In September 2022, following the Type C meeting and the submission of our complete response, the FDA allowed the 25 mg cohort of a Phase 2, four-week, placebo-controlled, dose exploration trial of CTI-1601 in FA patients to proceed. In connection with this decision, the FDA lifted its full clinical hold on the CTI-1601 clinical development program and imposed a partial hold. The dose exploration trial is designed to further characterize CTI-1601’s safety and PD and PK profiles to provide information about the preferred long-term dose and dose regimen. We have since initiated the 25 mg cohort of the Phase 2 dose exploration trial. Initiation of the second cohort and/or

39

other clinical trials is contingent on the FDA’s agreement based on its review of the trial's 25 mg cohort data and on review by the trial’s independent data monitoring committee. We anticipate that we will provide an update that will outline the next steps for the clinical trial in the second quarter of 2023 and anticipate reporting top-line data in the second half of 2023.

We do not know if, or when, the FDA will lift the partial clinical hold on our CTI-1601 program, if it will allow additional cohorts of the dose exploration study or if it will ever allow further clinical development of CTI-1601. If the FDA does not lift the clinical hold in a timely manner, or at all, our development timelines and our business may be adversely affected and our stock price may decline. Further, even if the FDA lifts the partial clinical hold, or if the FDA or other regulatory agencies continue to express safety concerns after the partial clinical hold is lifted, future CTI-1601 non-clinical or clinical studies may be required. In such instances, our progress in the development of CTI-1601 may be significantly slowed and the associated costs may be significantly increased, adversely affecting our business, which could impair our ability to ultimately obtain FDA or other regulatory approval for CTI-1601.

In clinical development of any product candidate, the outcome of toxicology studies and early clinical trials may not be positive and may not be predictive of the success of later non-clinical studies or clinical trials. Adverse toxicology or safety results could lead to clinical holds or other developmental delays. Interim results of clinical trials do not necessarily predict success in those or future clinical trials. Success in adult clinical trials may not predict the outcome of pediatric clinical trials.

Published clinical data or case reports from third parties or early clinical trial data of CTI-1601 or any future product candidates may not be predictive of the results of later-stage clinical trials. Interpretation of results from early, usually smaller, studies that suggest a clinically meaningful response in some patients, requires caution. Results from later stages of clinical trials enrolling more patients, or different patient populations, such as pediatric patients, may fail to show the desired safety or efficacy results or otherwise fail to be consistent with the results of earlier trials of the same product candidate. Later clinical trial results may not replicate earlier clinical trials for a variety of reasons, including differences in trial design, different trial endpoints (or lack of trial endpoints in exploratory studies), different patient population, number of patients, patient selection criteria, trial duration, drug dosage and formulation and lack of statistical power. These uncertainties are enhanced where the diseases under study lack established clinical endpoints, validated measures of efficacy, as is often the case with orphan diseases for which no drugs have been developed previously and where the product candidates target novel mechanisms. For example, to our knowledge, CTI-1601 is the only protein replacement therapy being developed for the treatment of FA and therefore non-clinical studies may not be adequate to predict efficacy in a clinical trial due to our novel protein replacement therapy platform.

In some instances, there can be significant variability in safety or efficacy results between different clinical trials of the same product candidate due to numerous factors, including changes in trial procedures set forth in protocols, differences in the size and type of the patient populations, such as pediatric patients, variability of the disease being studied, changes in and adherence to the dosing regimen and other clinical trial protocols and the rate of dropout among clinical trial participants. If we fail to ultimately receive positive results in clinical trials of CTI-1601, the development timeline and regulatory approval and commercialization prospects for CTI-1601, and, correspondingly, our business, financial prospects and results of operation would be negatively impacted.

Further, CTI-1601 or any future product candidates may not be approved even if they achieve their primary endpoint in clinical trials. The FDA, EMA or foreign regulatory authorities may disagree with our trial design and our interpretation of data from non-clinical studies and clinical trials. In addition, any of these regulatory authorities may change its requirements for the approval of a product candidate even after reviewing and providing comments or advice on a protocol for a pivotal clinical trial that, if successful, would potentially form the basis for an application for approval by the FDA, EMA or another regulatory authority. Furthermore, any of these regulatory authorities may also approve CTI-1601 or any future product candidates for a narrower indication than we may request or may grant approval contingent on the performance of costly post-marketing clinical trials.

40

We may experience difficulties identifying and enrolling patients in our clinical trials given the limited number of patients who have the disease for which CTI-1601 is being studied or for any other product candidate we may study in the future. Difficulty in enrolling patients could delay or prevent clinical trials of CTI-1601 or any future product candidate. There are also competing FA therapeutics, other competing studies and potentially other FA therapeutics that could be approvedthat may also limit the availability of prospective participants in CTI-1601 clinical trials.

Identifying and qualifying patients to participate in clinical trials of CTI-1601 is critical to our success. The timing of our clinical trials depends in part on the speed at which we can recruit patients to participate in testing CTI-1601, and we may experience delays in our clinical trials if we encounter difficulties in enrollment, such as difficulties with enrollment in pediatric clinical trials.

The conditions for which we are planning to evaluate CTI-1601 and any product candidates we may evaluate in the future, are rare genetic diseases. Accordingly, there are limited patient pools from which to draw for clinical trials. Arranging for investigative sites and recruiting patients for clinical trials in this disease may be very difficult. The recent FDA approval of a product for the treatment of FA may impact our ability to enroll patients in our clinical trials as patients using other FA treatments may be excluded from participation in our CTI-1601 studies or may be less likely to participate in our CTI-1601 clinical trials due to the availability of another FA therapy. If other companies are studying their investigational products in Friedreich’s ataxia and/or if other companies have their products approved for the treatment of FA, it may be more difficult to enroll eligible patients into our clinical trials. Competing priorities at sites and participation of subjects in other studies may limit our ability to execute clinical trials in a timely fashion, if at all.

In addition to the rarity of FA and other diseases that we are studying, the eligibility criteria of our clinical trials will further limit the pool of available study participants as it will require patients to have specific characteristics that we can measure to assure their disease is either severe enough or not too advanced to include them in a clinical trial. The process of finding and diagnosing patients may prove costly, especially since the diseases we are studying are rare. We also may not be able to identify, recruit, and enroll a sufficient number of appropriate patients to complete our clinical trials because of demographic criteria for prospective patients, the perceived risks and benefits of the product candidate under study, the proximity and availability of clinical trial sites for prospective patients, and the patient referral practices of physicians. The availability and efficacy of approved and competing therapies and clinical trials can also adversely impact enrollment. Furthermore, our inability to enroll a sufficient number of patients for our clinical trials, including pediatric clinical trials, could result in significant delays or may require us to abandon one or more clinical trials altogether. Enrollment delays in our clinical trials may result in increased development costs for CTI-1601 or any future product candidates, and jeopardize our ability to achieve our clinical development timeline and goals, including the dates by which we will commence, complete and receive results from clinical trials. If patients are unwilling to participate in our trials for any reason, the timeline for recruiting patients, conducting trials, and obtaining regulatory approval of potential products may be delayed. Enrollment delays in our clinical trials may also jeopardize our ability to commence sales of and generate revenues from CTI-1601, which could cause the value of our company to decline and limit our ability to obtain additional financing, if needed. Any of these occurrences may harm our business, financial condition, and prospects significantly.

FA has no FDA-approved therapies that address frataxin deficiency, which is the underlying cause of the disease, and clinical endpoints required to obtain approval are not well defined.

There are currently no FDA-approved products to treat FA that are designed to increase frataxin levels. We have concentrated our research and development efforts on developing a novel, FA therapy designed to address frataxin deficiency, which is the underlying cause of the disease, and our future success depends on the success of this therapeutic approach. The clinical trial requirements of the FDA and other comparable regulatory agencies and the criteria these regulators use to determine the safety and efficacy of any product candidate vary substantially according to the type, complexity, novelty and intended use and market of the potential product. Given the nature of FA, we may have to devise novel clinical endpoints to be tested in our clinical trials, which can lead to some subjectivity in interpreting trial results and could result in regulatory agencies not agreeing with the validity of our endpoints, or our interpretation of the clinical data, and therefore denying approval, which would materially adversely affect our business, financial condition and results of operations. As a result, the design and conduct of clinical trials for a therapeutic product candidate such as CTI-1601 that is intended to deliver FXN through a subcutaneously administered, recombinant fusion protein in FA patients are subject to unknown risks, and we may

41

experience setbacks with our planned clinical trials of CTI-1601 in FA because of the limited clinical experience with our mechanism of action in these patients.

In particular, regulatory authorities in the United States and the European Union have not issued definitive guidance as to how to measure and achieve efficacy in treatments for FA. As a result, the design and conduct of clinical trials of CTI-1601 may take longer, be more costly or be less effective as part of the novelty of development in FA. We may use new or novel endpoints or methodologies, and the FDA or other regulatory authorities may not consider the endpoints of our clinical trials to provide clinically meaningful results. Even if applicable regulatory authorities do not object to our proposed endpoints in an earlier stage clinical trial, such regulatory authorities may require evaluation of additional or different clinical endpoints in later-stage clinical trials.

CTI-1601 may cause adverse events or undesirable side effects in non-clinical or clinical trials that could delay or prevent its regulatory approval, limit the commercial profile of approved labeling, or result in significant negative consequences following regulatory approval, if any.

Any adverse events or undesirable side effects caused by, or other unexpected properties of, CTI-1601 in non-clinical or clinical studies could cause us, any future collaborators, an IRB or ethics committee or regulatory authorities to interrupt, delay or halt clinical trials of our product candidate and could result in a more restrictive label or the delay or denial of regulatory approval by the FDA or other regulatory authorities. Should the FDA permit us to continue with the clinical development of CTI-1601, it is possible that as we progress CTI-1601 through clinical trials and toxicology studies, or as the use of CTI-1601 becomes more widespread if it receives regulatory approval, illnesses, injuries, discomforts and other adverse events that were not observed in earlier trials, as well as conditions that did not occur or went undetected in previous trials, may be reported by patients. If such side effects become known later in development or after approval, such findings may harm our business, financial condition and prospects significantly. Further, if a serious safety issue is identified in connection with the use of CTI-1601 commercially or in third-party clinical trials elsewhere, such issues may adversely affect the development potential of CTI-1601 elsewhere or result in regulatory authorities restricting our ability to develop or commercialize CTI-1601, if approved.

Further, if CTI-1601 were to receive marketing approval and we or others identify undesirable side effects caused by the product (or any other product) after the approval, a number of potentially significant negative consequences could result, including:

•

regulatory authorities may request that we recall or withdraw the product from the market or may limit the approval of the product through labeling or other means;

•

regulatory authorities may require the addition of labeling statements, such as a “boxed” warning or a contraindication or a precaution, or labeling restrictions based on patient population;

•

we may be required to change the way the product is distributed or administered, conduct additional clinical trials or change the labeling of the product;

•

we may decide to recall or remove the product from the marketplace;

•

we could be sued or held liable for injury caused to individuals exposed to or taking our product candidates;

•

we could be required to conduct expensive post-marketing studies;

•

we could lose our commercial market opportunity and our revenues could decrease substantially;

•

damage to the public perception of the safety of CTI-1601; and

•

our reputation may suffer and physicians or patients might be less likely to use our product or may refer patients to products produced by our competitors.

Any of these events could prevent us from achieving or maintaining market acceptance of the affected product candidate and could substantially increase the costs of commercializing our product candidates and significantly impact our ability to successfully commercialize our product candidates and generate revenues, all of which would materially adversely affect our business, financial condition and results of operations.

42

Interim, “top-line,” and preliminary data from our clinical trials that we announce or publish from time to time may change as more patient data become available or as additional analyses are conducted, and as the data are subject to audit and verification procedures that could result in material changes in the final data.

From time to time, we may publish interim, “top-line” or preliminary data from our clinical trials. Interim data from clinical trials that we may complete are subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. Preliminary or “top-line” data also remain subject to audit and verification procedures that may result in the final data being materially different from the preliminary data we previously published. As a result, interim and preliminary data should be viewed with caution until the final data are available. Material adverse changes between preliminary, “top-line” or interim data and final data could significantly harm our business, financial condition, results of operations and prospects.

Our approach to discover and develop fusion proteins for delivering proteins is novel and may never lead to marketable products.

We have concentrated our efforts and research and development activities on delivering proteins (FXN or other) to intracellular targets. Our future success depends on the successful development and manufacturing of such therapeutics and the effectiveness of our platform. The scientific discoveries that form the basis for our research are relatively new.

CTI-1601 uses a novel and unproven approach and mechanism to treat FA and therefore its efficacy and safety are difficult to predict, and there is no guarantee that CTI-1601 will be approved by the FDA, the EMA, or any other regulatory authorities.

If CTI-1601 proves to be ineffective, unsafe or commercially unviable, it is possible that our platform and pipeline would have little, if any, value, which would substantially harm our business, financial condition, results of operations and prospects. In addition, our approach may expose us to additional financial risks and make it more difficult to raise additional capital than other, more advanced proven technologies, which would materially adversely affect our business, financial condition and results of operations.

Protein replacement therapies are novel, complex and difficult to manufacture. We could experience manufacturing problems that result in delays in the development or commercialization of our protein replacement therapy platform or product candidates or otherwise harm our business.

The manufacture of fusion proteins, such as CTI-1601 and any fusion protein candidates, is technically complex and necessitates substantial expertise and capital investment. Production difficulties caused by unforeseen events may delay the availability of material for clinical trials and commercial products for CTI-1601 or any fusion protein product that may receive regulatory approval in the future. Additionally, because biologic products are complex, the manufacture of such products and product candidates is more difficult and costly. We may not be able to have such products reliably manufactured in accordance with the applicable regulatory requirements in sufficient quantities to support our development programs and, if ultimately approved, commercial supply.

There are a limited number of contract manufacturers who specialize in the manufacture of biologic products and those that do may still be developing appropriate processes, controls and facilities for large-scale production. While we believe that there will be sufficient sources of supply that can satisfy our clinical and commercial requirements, we cannot be certain that we will be able to identify and establish additional relationships with such sources, if necessary, in a timely manner or at all, and what the terms and costs of such new arrangements would be, or that such suppliers would be able to supply our potential commercial needs. Furthermore, in the event our primary manufacturer cannot meet our needs, any switch to an alternative manufacturer, if available, would result in a significant delay, would require FDA approval, and cause material additional costs.

As further described in these risk factors, the manufacturers of biologic products must comply with strictly enforced cGMP requirements, state and federal regulations, as well as foreign requirements when applicable. Any failure by us or our contract manufacturing organizations to adhere to or document compliance to such regulatory requirements could lead to a delay or interruption in the availability of our program materials for clinical trials or commercial use, among other consequences. If we or our manufacturers fail to comply with the FDA, EMA, or other regulatory authorities, it could result in sanctions being imposed on us, including fines, injunctions, civil penalties, delays, suspension or withdrawal of approvals, clinical holds or termination of clinical trials, Form 483s, warning or untitled letters, regulatory communications warning the public about safety issues with a product, import or export

43

refusals, license revocation, seizures, detentions, or recalls of product candidates or product, operating restrictions, criminal prosecutions or debarment, suits under the civil False Claims Act, corporate integrity agreements, or consent decrees any of which could significantly and adversely affect supplies of our product candidates and our business, financial conditions and results of operations could be materially adversely affected.

Our current dependence upon others for the manufacture of our product candidates may also adversely affect our business, results of operations, financial condition, and our ability to commercialize any product candidates that receive regulatory approval on a timely and competitive basis.

Fast track designation by the FDA or any future designations may not lead to a faster development, regulatory review or approval process and it does not increase the likelihood that any of our product candidates will receive marketing approval.

We have received fast track therapy designation for CTI-1601 for the treatment of FA. We may, in the future, apply for other designations from the FDA (such as breakthrough therapy or accelerated approval) for CTI-1601 or future product candidates. Designation for these programs is within the discretion of the FDA. Accordingly, even if we believe CTI-1601 or a future product candidate meets the criteria for designation, the FDA may disagree. In any event, the receipt of a designation may not result in a faster development process, review or approval compared to products considered for approval under conventional FDA procedures and, in any event, does not assure ultimate approval by the FDA. In addition, even though CTI-1601 has obtained fast track designation, the FDA may later decide that it no longer meets the criteria for designation and revoke it. Approval of other therapies for the treatment Friedreich’s ataxia could negatively impact our continued fast track therapy designation for CTI-1601 for the treatment of FA. In addition, if we apply to the FDA for other designations for CTI-1601 or future product candidates, the FDA might not grant such designations. If we apply for any similar programs in foreign countries for CTI-1601 or future product candidates, those designations also might not be granted by the regulatory authorities of those countries. Any of the above could adversely affect our business, financial condition and results of operations.

If we decide to pursue accelerated approval for any of our product candidates, it may not lead to a faster development or regulatory review or approval process and does not increase the likelihood that it will receive marketing approval. If we are unable to obtain approval under an accelerated pathway, we may be required to conduct additional clinical trials beyond those that we contemplate, which could increase the expense of obtaining, reduce the likelihood of obtaining, and/or delay the timing of obtaining, necessary marketing approvals.

In the future, we may decide to pursue accelerated approval for one or more of our product candidates. Under the FDA’s accelerated approval program, the FDA may approve a drug or biologic for a serious or life-threatening illness that provides meaningful therapeutic benefit to patients over existing treatments based upon a surrogate endpoint that is reasonably likely to predict clinical benefit, or on a clinical endpoint that can be measured earlier than irreversible morbidity or mortality, that is reasonably likely to predict an effect on irreversible morbidity or mortality or other clinical benefit, taking into account the severity, rarity, or prevalence of the condition and the availability or lack of alternative treatments. Approval of other therapies for the treatment Friedreich’s ataxia, including the recent approval of omaveloxolone for the treatment of FA, could negatively impact our ability to demonstrate a benefit over existing treatments and therefore utilize the accelerated approval pathway. For drugs or biologics granted accelerated approval, post-marketing confirmatory trials are required to describe the anticipated effect on irreversible morbidity or mortality or other clinical benefit. These confirmatory trials must be completed with due diligence and, in some cases, the FDA may require that the trial be designed, initiated and/or fully enrolled prior to approval.

Moreover, the FDA may withdraw approval of any product candidate approved under the accelerated approval pathway if, for example:

•

the trial or trials required to verify the predicted clinical benefit of the product candidate fails to verify such benefit or do not demonstrate sufficient clinical benefit to justify the risks associated with such product;

•

other evidence demonstrates that the product candidate is not shown to be safe or effective under the conditions of use;

•

we fail to conduct any required post-approval trial of our product candidate with due diligence; or

•

we disseminate false or misleading promotional materials relating to the relevant product candidate.

44

In addition, the FDA may terminate the accelerated approval program or change the standards under which accelerated approvals are considered and granted in response to public pressure or other concerns regarding the accelerated approval program. Changes to or termination of the accelerated approval program could prevent or limit our ability to obtain accelerated approval of any of our clinical development programs. Recently, the accelerated approval pathway has come under scrutiny within the FDA and by Congress. The FDA has put increased focus on ensuring that confirmatory studies are conducted with diligence and, ultimately, that such studies confirm the benefit. In addition, Congress recently enacted the Food and Drug Omnibus Reform Act (“FDORA”), which included provisions related to the accelerated approval pathway. Pursuant to FDORA, the FDA is authorized to require a post-approval study to be underway prior to approval or within a specified time period following approval. FDORA also requires the FDA to specify conditions of any required post-approval study and requires sponsors to submit progress reports for required post-approval studies and any conditions required by the FDA. FDORA enables the FDA to initiate enforcement action for the failure to conduct with due diligence a required post-approval study, including a failure to meet any required conditions specified by the FDA or to submit timely reports.

If we fail to maintain orphan drug designation or other regulatory exclusivity for CTI-1601 or obtain such exclusivity for any of our other product candidates in the future, our competitive position would be harmed.

We received orphan drug designation from the FDA for CTI-1601 for the treatment of FA in July 2017. In the United States, orphan drug designation entitles a party to financial incentives such as tax advantages and user-fee waivers. In addition, if a product candidate that has orphan drug designation subsequently receives the first FDA approval for the disease for which it has such designation, the product is entitled to orphan drug exclusivity, which means that the FDA may not approve any other applications, including an NDA or BLA, to market the same drug for the same indication for seven years, except in limited circumstances, including if the FDA concludes that the later drug is clinically superior to the approved drug. A drug is clinically superior if it is safer, more effective, or makes a major contribution to patient care. In the case of a biological product, whether a drug is the same drug is based on the principal molecular structural features of the product. Orphan drug designation neither shortens the development time or regulatory review time of a drug nor gives the drug any advantage in the regulatory review or approval process.

Additionally, we may lose orphan drug exclusivity if we are unable to assure sufficient quantity of the drug to meet the needs of patients with the rare disease or condition. Moreover, orphan drug exclusivity may not effectively protect our product candidates from competition because different drugs can be approved for the same condition. Further, even after an orphan drug is approved, the FDA or comparable foreign regulatory authority can subsequently approve another drug for the same condition if such regulatory authority concludes that the later drug is clinically superior, if it is shown to be safer, more effective or makes a major contribution to patient care.

We have also received orphan drug designation for CTI-1601 in the European Union. In the European Union, the European Medicines Agency, or EMA’s Committee for Orphan Medicinal Products grants orphan drug designation to promote the development of products that are intended for the diagnosis, prevention or treatment of life threatening or chronically debilitating conditions affecting not more than five in 10,000 persons in the European Union. Additionally, designation is granted for products intended for the diagnosis, prevention or treatment of a life threatening, seriously debilitating or serious and chronic condition and when, without incentives, it is unlikely that sales of the drug in the European Union would be sufficient to justify the necessary investment in developing the drug. In the European Union, orphan drug designation also entitles a party to financial incentives such as reduction of fees or fee waivers and ten years of market exclusivity following drug approval. This period may be reduced to six years if the orphan drug designation criteria are no longer met, including where it is shown that the product is sufficiently profitable so that market exclusivity is no longer justified. Loss of orphan drug designation for CTI-1601 or the failure to obtain such designation in other countries or for any future product candidates could adversely affect our business, financial condition and results of operation.

If another product has received approval in the indications for which we have received orphan drug designation, we may still receive approval in that indication if we can demonstrate that our product candidate is clinically superior to the existing orphan product. This demonstration of clinical superiority may be done at the time of initial approval or in post-approval studies, depending on the type of marketing authorization granted. Having to comply with these additional requirements to obtain orphan drug exclusivity could adversely affect our business, financial condition and results of operation.

45

Although we have obtained rare pediatric disease designation for CTI-1601, we may not be eligible to receive a priority review voucher in the event the FDA determines we no longer meet the criteria for designation, revokes the designation or that FDA approval does not occur prior to September 30, 2026.

The sponsor of an application for a rare pediatric disease drug product may be eligible for a voucher that can be used or sold to obtain a priority review for a subsequent application submitted under section 505(b)(1) of the FDCA or section 351 of the PHS Act. The rare pediatric disease priority review voucher program was most recently reauthorized by Congress through September 30, 2024, with the potential for priority review vouchers to be granted through September 30, 2026. We received rare pediatric disease designation from the FDA for CTI-1601 in 2019. We may, in the future, apply for rare pediatric disease designation from the FDA for future product candidates that may qualify for designation. Vouchers for rare pediatric disease drugs are awarded for qualifying applications when the drug receives approval.

Although CTI-1601 has received rare pediatric disease designation, CTI-1601 may not receive a priority review voucher for a number of reasons: CTI-1601 may not receive approval; CTI-1601 may receive approval in adults, but not pediatric patients; CTI-1601 may not meet the eligibility requirements for a priority voucher at the time we seek approval for CTI-1601; or we may not meet the current deadline for receiving a priority review voucher (September 30, 2026), in which case we would not be able to obtain a voucher unless Congress further reauthorizes the program. Finally, a rare pediatric disease designation does not necessarily lead to faster development or regulatory review of the product or increase the likelihood that it will receive marketing approval. If we apply for designation for future product candidates as drugs for rare pediatric diseases, the FDA may not grant the designation. The failure to maintain rare pediatric disease designation for CTI-1601 or if FDA approval does not occur prior to September 30, 2026 could result in the inability to receive a priority review voucher which could adversely affect our business, financial condition and results of operations.

If we fail to maintain PRIME designation in the European Union for CTI-1601, our competitive position would be harmed.

The PRIME scheme is open to medicines under development and for which the applicant intends to apply for an initial MAA through the centralized procedure. Eligible products must target conditions for which where is an unmet medical need (there is no satisfactory method of diagnosis, prevention or treatment in the European Union or, if there is, the new medicine will bring a major therapeutic advantage) and they must demonstrate the potential to address the unmet medical need by introducing new methods or therapy or improving existing ones. Applicants will typically be at the exploratory clinical trial phase of development and will have preliminary clinical evidence in patients to demonstrate the promising activity of the medicine and its potential to address to a significant extent an unmet medical need. In exceptional cases, applicants from the academic sector or SMEs may submit an eligibility request at an earlier stage of development if compelling non-clinical data in a relevant model provide early evidence of promising activity, and first in man studies indicate adequate exposure for the desired pharmacotherapeutic effects and tolerability.

If a medicine is selected for the PRIME scheme, the EMA:

•

appoints a rapporteur from the CHMP or from the CAT to provide continuous support and to build up knowledge of the medicine in advance of the filing of an MMA;

•

issues guidance on the applicant’s overall development plan and regulatory strategy;

•

organizes a kick-off meeting with the rapporteur and experts from relevant EMA committees and working groups;

•

provides a dedicated EMA contact person; and

•

provides scientific advice at key development milestones, involving additional stakeholders, such as health technology assessment bodies and patients, as needed.

For SMEs who enter the scheme based on data showing proof of principle, the appointment of the rapporteur occurs once they have generated data confirming eligibility at proof of concept stage. They are required to submit relevant data and justification as the product development reaches this stage.

Medicines that are selected for the PRIME scheme are also expected to benefit from EMA’s accelerated assessment procedure at the time of application for marketing authorization. Where, during the course of

46

development, a medicine no longer meets the eligibility criteria, or if a medicine granted early access to the PRIME scheme cannot later demonstrate proof of concept, support under the PRIME scheme may be withdrawn. Approval of other therapies for the treatment Friedreich’s ataxia, including the recent approval of omaveloxolone could negatively impact our continued access to this and similar programs. Loss of PRIME designation for CTI-1601 or the failure to obtain such designation for any future product candidates could adversely affect our business, financial condition and results of operation.

Changes in regulatory requirements, FDA guidance, guidance from other regulatory authorities or unanticipated events during our non-clinical or clinical trials of CTI-1601 or future product candidates may result in changes to clinical trial protocols or additional non-clinical or clinical trial requirements, which could result in increased costs to us and could delay our development timeline.

Changes in regulatory requirements, FDA guidance or guidance from EMA or unanticipated events during our non-clinical or clinical trials may force us to terminate or adjust our clinical programs. The FDA, or other applicable regulatory authorities may impose additional clinical trial and/or non-clinical study requirements. Amendments to our clinical trial protocols would require resubmission to the FDA, or the applicable regulatory authorities as well as IRBs and ethics committees for review and approval, which may adversely impact the cost, timing or successful completion of a clinical trial. If we experience delays completing, or if we terminate, any of our clinical trials, or if we are required to conduct additional clinical trials, or non-clinical studies and/or post-market studies, the commercial prospects for CTI-1601 or any other potential product candidates may be harmed and our ability to generate product revenue will be delayed or eliminated, and it would materially adversely affect our business, financial condition and results of operations.

In order to market any product outside of the United States, we must comply with numerous and varying regulatory requirements of other countries regarding drug development and commercialization. The approval processes varies from country to country and can involve additional product testing and additional administrative review periods. The time required to obtain approval in other countries might differ from and be longer than that required to obtain FDA approval. Regulatory approval in one country does not ensure regulatory approval in another, but a failure or delay in obtaining regulatory approval in one country may negatively impact the regulatory process in others. Even if we receive marketing approval for CTI-1601 in the United States, we may never receive regulatory approval to market CTI-1601 outside of the United States.

Disruptions at the FDA and other government agencies caused by funding shortages or global health concerns could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, approved or commercialized in a timely manner or at all, which could negatively impact our business.

The ability of the FDA to review and/or approve new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory, and policy changes, the FDA’s ability to hire and retain key personnel, and accept the payment of user fees, and other events that may otherwise affect the FDA’s ability to perform routine functions. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable.

Disruptions at the FDA and other agencies may also slow the time necessary for new drugs to be reviewed and/or approved by necessary government agencies, which would adversely affect our business. For example, since March 2020 when foreign and domestic inspections of facilities were largely placed on hold, the FDA has been working to resume routine surveillance, bioresearch monitoring and pre-approval inspections on a prioritized basis. Since April 2021, the FDA has conducted limited inspections and employed remote interactive evaluations, using risk management methods, to meet user fee commitments and goal dates. Ongoing travel restrictions and other uncertainties continue to impact oversight operations both domestic and abroad and it is unclear when standard operational levels will resume. Regulatory authorities outside the United States may adopt similar restrictions or other policy measures in response to a resurgence of COVID-19, and/or other outbreaks of communicable diseases. If a prolonged government shutdown occurs, or if global health concerns prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

47

Regulatory requirements governing biologic products have changed frequently and may continue to change in the future. Such requirements may lengthen the regulatory review process, require us to perform additional non-clinical studies or clinical trials, and increase our costs, or may force us to delay, limit or terminate certain of our programs.

Regulatory requirements governing biologic drug products are evolving and may continue to change in the future. As a result, it is difficult to determine how long it will take or how much it will cost to obtain regulatory approvals for CTI-1601 for the treatment of FA or any other future protein replacement therapy product candidates in any indication, if at all. Regulatory review agencies and the new requirements and guidelines they promulgate may lengthen the regulatory review process, require us to perform additional or larger studies, increase our development costs, lead to changes in regulatory positions and interpretations, delay or prevent approval and commercialization of our product candidates or lead to significant post-approval studies, limitations or restrictions. Delays, failure or unexpected costs in obtaining, the regulatory approval necessary to bring our product candidates to market could have a material adverse effect on our business, results of operations, financial condition and prospects.

In addition, the clinical trial requirements of the FDA, the EMA and other regulatory authorities and the criteria these regulators use to determine the safety and efficacy of a product candidate vary substantially according to the type, complexity, novelty and intended use and market of such product candidates. The regulatory approval process for novel product candidates such as ours can be more expensive and take longer than for other, better known or more extensively studied product candidates.

The clinical trials of CTI-1601 and any future product candidates are, and the manufacturing and marketing of CTI-1601 and any future product candidates, will be subject to extensive and rigorous review and regulation by numerous government authorities in the United States and in other countries, such as within the European Union, where we intend to seek regulatory approval of, and market, any product candidates.

Before obtaining regulatory approvals for the commercial sale of any product candidate, we must demonstrate through non-clinical testing and clinical trials that the product candidate is safe and effective for use in each target indication. This process can take many years. In addition, approval policies, regulations, or the type and amount of clinical data necessary to gain approval may change during the course of a product candidate’s clinical development and may vary among jurisdictions, which may cause delays in the approval of or may result in the decision not to approve our product candidates. We have not obtained regulatory approval for CTI-1601, and it is possible that this product candidate or any product candidates we may seek to develop in the future will never obtain regulatory approval. If marketing approval is obtained, it will likely include post-marketing studies, and other post-marketing requirements, and surveillance such as REMS which will require the expenditure of substantial resources beyond the proceeds we currently have on hand.

Furthermore, we are not permitted to market CTI-1601 in the United States or the European Union until we receive approval of a BLA from the FDA or a MAA from the EMA, or in any other foreign countries until we receive the requisite marketing approval from such countries. The development of drugs for FA or other rare diseases may require initial non-clinical studies, early and usually smaller, clinical trials and randomized, double-blind placebo controlled long-term safety and efficacy trials in order to test the safety and efficacy of the drug.

CTI-1601 requires substantial further clinical development before we can submit a BLA to the FDA. Development and/or regulatory programs for CTI-1601 in any countries other than the United States (such as a MAA to the EMA) are only in very preliminary stages and may require substantial further development in those countries prior to regulatory submissions seeking regulatory approval for marketing.

Even after successful completion of clinical trials, there is a risk that the FDA or other regulatory agencies may request further information from us, disagree with our findings or otherwise undertake a lengthy review of our submission.

The FDA and certain European regulatory authorities may delay, limit or deny testing or approval of CTI-1601 for many reasons, including, among others:

•

we may not be able to demonstrate that CTI-1601 is safe and effective to the satisfaction of the FDA or the EMA;

•

the results of our clinical trials may not meet the level of statistical or clinical significance required by the FDA or the EMA for marketing approval;

48

•

the FDA or the EMA may disagree with the number, design, size, duration, conduct or implementation of our clinical trials;

•

the FDA or the EMA may require that we conduct additional non-clinical studies and/or clinical trials;

•

the FDA or the EMA may not approve the formulation, manufacturing, labeling or specifications of CTI-1601;

•

the CROs that we retain to conduct and/our clinical trials may take actions outside of our control that materially adversely impact our clinical trials;

•

the FDA or the EMA may find the data from non-clinical studies and clinical trials insufficient to demonstrate that CTI-1601’s clinical and other benefits outweigh its safety risks;

•

the FDA or the EMA may disagree with our interpretation of data from our non-clinical studies or clinical trials;

•

the FDA or the EMA may not accept data generated at our clinical trial sites;

•

if and when our BLA is submitted, the FDA could require an FDA advisory committee assessment, or the advisory committee may recommend against approval of our application or may recommend that the FDA require, as a condition of approval, additional non-clinical studies or clinical trials, limitations on approved labeling or distribution and use restrictions;

•

the FDA or the EMA could require development of a REMS as a condition of approval or post-approval, or may not agree with our proposed REMS, or may impose additional requirements, including requirements that limit the promotion, advertising, distribution, or sales of CTI-1601;

•

the FDA or the EMA may find deficiencies with or not approve the manufacturing processes or facilities of third-party manufacturers with which we contract; or

•

the FDA or the EMA may change their approval policies or adopt new regulations rendering our clinical data insufficient for approval.

Any of these factors, many of which are beyond our control, could jeopardize our ability to obtain and/or maintain regulatory approval for and successfully market CTI-1601. Any delay or failure in obtaining required approvals could have a material adverse effect on our business, financial condition and results of operations. This process can take many years and will likely require the expenditure of substantial resources. Of the large number of drugs in development in the United States, only a small percentage will successfully complete the FDA regulatory approval process and be commercialized. It is possible that the FDA or other regulatory agencies will not approve any application that we submit. It is possible that our product candidates may not obtain appropriate regulatory approvals necessary for us to commence clinical trials for our product candidates. Accordingly, even if we are able to obtain the requisite financing to continue to fund our development and clinical trials, we cannot ensure that CTI-1601, or any other of our potential product candidates will be successfully developed or commercialized.

We are subject to healthcare laws and regulations, and health information privacy and security laws, which could expose us to criminal sanctions, civil penalties, contractual damages, reputational harm and diminished profits and future earnings.

Healthcare providers, physicians and others will play a primary role in the recommendation and prescription of CTI-1601 or any potential product candidates, if approved. Our future arrangements with third-party payors will expose us broadly to applicable fraud and abuse and other healthcare laws and regulations that may constrain the business or financial arrangements and relationships through which we market, sell and distribute CTI-1601 or potential product candidates, if we obtain marketing approval. In addition, we may be subject to patient privacy regulation by both the federal government and the states or other countries in which we conduct our business. Restrictions under applicable federal and state healthcare laws and regulations include the following:

•

the federal Anti-Kickback Statute prohibits, among other things, persons from knowingly and willfully soliciting, offering, receiving or paying remuneration, directly or indirectly, in cash or in kind, to induce or reward either the referral of an individual for, or the purchase, order or recommendation of, any good or

49

service, for which payment may be made under federal healthcare programs such as Medicare and Medicaid;

•

the federal false claims laws impose criminal and civil penalties, including those from civil whistleblower or qui tam actions pursuant to the federal False Claims Act, against individuals or entities for knowingly presenting, or causing to be presented, to the federal government, claims for payment that are false or fraudulent or making a false statement to avoid, decrease, or conceal an obligation to pay money to the federal government;

•

HITECH imposes criminal and civil liability for executing a scheme to defraud any healthcare benefit program and also imposes obligations, including mandatory contractual terms, with respect to safeguarding the privacy, security and transmission of individually identifiable health information;

•

the federal false statements statute prohibits knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false statement in connection with the delivery of or payment for healthcare benefits, items or services;

•

the federal transparency requirements, sometimes referred to as the “Sunshine Act,” under the Affordable Care Act, require manufacturers of drugs, devices, biologics, and medical supplies to report to CMS information related to payments and other transfers of value provided to physicians (defined to include doctors, dentists, optometrists, podiatrists and chiropractors), physician assistants, nurse practitioners, clinical nurse specialists, certified nurse anesthetists, certified nurse-midwives and teaching hospitals, as well as ownership and investment interests held by physicians and their immediate family members;

•

federal consumer protection and unfair competition laws, which broadly regulate marketplace activities and activities that potentially harm consumers; and

•

analogous state laws and regulations, such as state anti-kickback and false claims laws and transparency laws, may apply to sales or marketing arrangements and claims involving healthcare items or services reimbursed by non-governmental third-party payors, including private insurers. Some state laws require pharmaceutical companies to comply with the pharmaceutical industry’s voluntary compliance guidelines and the relevant compliance guidance promulgated by the federal government in addition to requiring drug manufacturers to report information related to payments to physicians and other healthcare providers or marketing expenditures and drug pricing.

Ensuring that our future business arrangements with third parties comply with applicable healthcare laws and regulations could be costly. It is possible that governmental authorities will conclude that our business practices do not comply with current or future statutes, regulations or case law involving applicable fraud and abuse or other healthcare laws and regulations. If our operations, including anticipated activities to be conducted by our sales team, were found to be in violation of any of these laws or any other governmental regulations that may apply to us, we may be subject to significant civil, criminal and administrative penalties, damages, fines and exclusion from government funded healthcare programs, such as Medicare and Medicaid, any of which could substantially disrupt our operations and would materially adversely affect our business, financial condition and results of operations. If any of the physicians or other providers or entities with whom we expect to do business is found not to be in compliance with applicable laws, they may be subject to criminal, civil or administrative sanctions, including exclusions from government funded healthcare programs, which could have a material adverse effect on our business, results of operations, financial condition and prospects.

Healthcare legislation, including potentially unfavorable pricing regulations or other healthcare reform initiatives may increase the difficulty and cost for us to obtain marketing approval of and commercialize our product candidates.

The commercial potential for our approved products, if any, could be affected by changes in healthcare spending and policy in the United States and abroad. We operate in a highly regulated industry. New laws, regulations or judicial decisions or new interpretations of existing laws, regulations or decisions, related to healthcare availability, the method of delivery or payment for healthcare products and services could adversely affect our business, operations and financial condition. The United States and many foreign jurisdictions have enacted or proposed legislative and regulatory changes affecting the healthcare system that may affect our ability to profitably sell our product and product candidates, if approved. The United States government, state legislatures and foreign governments also have shown significant interest in implementing cost-containment programs to limit the

50

growth of government-paid healthcare costs, including price controls, restrictions on reimbursement and requirements for substitution of generic products for branded prescription drugs.

The Affordable Care Act was intended to broaden access to health insurance, reduce or constrain the growth of healthcare spending, enhance remedies against fraud and abuse, add transparency requirements for the healthcare and health insurance industries, impose new taxes and fees on the health industry and impose additional health policy reforms. There have been significant ongoing administrative, executive and legislative efforts to modify or eliminate the Affordable Care Act. For example, the Tax Act enacted on December 22, 2017, repealed the shared responsibility payment for individuals who fail to maintain minimum essential coverage under section 5000A of the Internal Revenue Code, commonly referred to as the individual mandate. Other legislative changes have been proposed and adopted since the passage of the Affordable Care Act. The Budget Control Act of 2011,and subsequent legislation triggered reductions to Medicare payments to healthcare providers of up to 2.0% per fiscal year, which will remain in effect through 2031 unless additional Congressional action is taken. The American Taxpayer Relief Act was signed into law in 2013, which, among other things, reduced Medicare payments to several types of providers, including hospitals, imaging centers and cancer treatment centers, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years.

Most recently, the IRA includes several provisions that will impact our business to varying degrees, including provisions that reduce the out-of-pocket cap for Medicare Part D beneficiaries to $2,000 starting in 2025; impose new manufacturer financial liability on certain drugs in Medicare Part D, allow the U.S. government to negotiate Medicare Part B and Part D price caps for certain high-cost drugs and biologics without generic or biosimilar competition, require companies to pay rebates to Medicare B and Part D for certain drug prices that increase faster than inflation, and delay the rebate rule that would limit the fees that pharmacy benefit managers can charge.

We expect that changes to the Affordable Care Act, the Medicare and Medicaid programs, changes allowing the federal government to directly negotiate drug prices and changes stemming from other healthcare reform measures, especially with regard to healthcare access, financing or other legislation in individual states, could have a material adverse effect on the healthcare industry.

At the state level, legislatures have increasingly passed legislation and implemented regulations designed to control pharmaceutical product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing.

We expect that additional federal, state and foreign healthcare reform measures will be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services, which could result in limited coverage and reimbursement and reduced demand for our products, once approved, or additional pricing pressures.

Even if approved, reimbursement policies could limit our ability to sell product candidates that we elect to sell on our own.

If approved by regulatory authorities, market acceptance and sales of product candidates that we elect to sell on our own will depend on reimbursement policies and may be affected by healthcare reform measures. Government authorities and third-party payors, such as private health insurers and health maintenance organizations, decide which medications they will pay for and establish reimbursement levels for those medications. Cost containment is a primary concern in the U.S. healthcare industry and elsewhere. Government authorities and these third-party payors have attempted to control costs by limiting coverage and the amount of reimbursement for particular medications. We cannot be sure that reimbursement will be available for CTI-1601, if approved, or future product candidates that we elect to sell on our own and, if reimbursement is available, the level of such reimbursement. Reimbursement may impact the demand for, or the price of, product candidates that we elect to. If reimbursement is not available or is available only at limited levels, we may not be able to successfully commercialize product candidates that we elect to sell.

In some foreign countries, particularly in Canada and European countries, the pricing of prescription pharmaceuticals is subject to strict governmental control. In these countries, pricing negotiations with governmental authorities can take six to 12 months or longer after the receipt of regulatory approval and product launch. To obtain favorable reimbursement for the indications sought or pricing approval in some countries, we may be required to conduct a clinical trial that compares the cost-effectiveness of product candidates that we elect to sell on our own with other available therapies. If reimbursement for product candidates that we elect to sell on our own is

51

unavailable in any country in which we seek reimbursement, if it is limited in scope or amount, if it is conditioned upon our completion of additional clinical trials, or if pricing is set at unsatisfactory levels, our business, financial conditions and results of operations could be materially adversely affected.

Even if we obtain regulatory and marketing approval for a product candidate, our product candidates will remain subject to regulatory oversight.

Even if we receive marketing and regulatory approval for CTI-1601 or a future product candidate, regulatory authorities may still impose significant restrictions on the indicated uses or marketing or impose ongoing requirements for potentially costly post-approval studies. CTI-1601 or future product candidates will also be subject to ongoing regulatory requirements for manufacturing, labeling, packaging, storage, advertising, promotion, sampling, record-keeping and submission of safety and other post-market information. The FDA has significant post-market authority, including, for example, the authority to require labeling changes based on new safety information and to require post-market studies or clinical trials to evaluate serious safety risks related to the use of a drug. An unsuccessful post-marketing study or failure to complete such a study could result in the withdrawal of marketing approval. Any regulatory approvals that we receive for CTI-1601 may also be subject to a REMS, limitations on the approved indicated uses for which the product may be marketed or to the conditions of approval, or contain requirements for potentially costly post-marketing testing, including post-approval clinical trials, and surveillance to monitor the quality, safety and efficacy of the product, all of which could lead to lower sales volume and revenue. For example, the holder of an approved BLA or NDA is obligated to monitor and report adverse events and any failure of a product to meet the specifications in the BLA or NDA. The holder of an approved BLA or NDA also must submit new or supplemental applications and obtain FDA approval for certain changes to the approved product, product labeling or manufacturing process. Advertising and promotional materials must comply with FDA rules and are subject to FDA review, in addition to other potentially applicable federal and state laws.

In addition, product manufacturers and their facilities are subject to payment of user fees and continual review and periodic inspections by the FDA and other regulatory authorities for compliance with cGMP requirements and adherence to commitments made in the BLA or NDA or foreign marketing application. If we, or a regulatory authority, discover(s) previously unknown problems with a product, such as adverse events of unanticipated severity or frequency, or problems with the facility where the product is manufactured or if a regulatory authority disagrees with the promotion, marketing or labeling of that product, a regulatory authority may impose restrictions relative to that product, the manufacturing facility or us, including requiring recall or withdrawal of the product from the market or suspension of manufacturing.

If we or our contractors fail to comply with applicable regulatory requirements following approval of CTI-1601, a regulatory authority may:

•

issue a warning letter, or untitled letter asserting that we are in violation of the law;

•

require us to enter into a consent decree, which can include imposition of various fines, reimbursements for inspection costs, required due dates for specific actions and penalties for non-compliance;

•

request voluntary product recalls;

•

seek an injunction or impose administrative, civil or criminal penalties or monetary fines;

•

suspend or withdraw regulatory approval;

•

suspend any ongoing clinical trials;

•

refuse to approve a pending BLA or NDA or comparable foreign marketing application (or any supplements thereto) submitted by us;

•

restrict the marketing or manufacturing of the product;

•

seize or detain the product or otherwise require the withdrawal of the product from the market;

•

refuse to permit the import or export of product candidates; or

•

refuse to allow us to enter into supply contracts, including government contracts.

Any government investigation of alleged violations of law could require us to expend significant time and resources in response and could generate negative publicity. The occurrence of any event or penalty described above

52

may inhibit our ability to commercialize CTI-1601, if approved, and adversely affect our business, financial condition, results of operations and prospects.

In addition, the FDA’s policies, and those of equivalent foreign regulatory agencies, may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of CTI-1601. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any marketing approval that we may have obtained and we may not achieve or sustain profitability, which would materially and adversely affect our business, financial condition, results of operations and prospects.

Even if we receive marketing approval for CTI-1601 in the United States, we may never receive regulatory approval to market CTI-1601 outside of the United States.

We may pursue marketing approval for CTI-1601 in the United States, the European Union and in other jurisdictions worldwide. In order to market any product outside of the United States, we must establish and comply with the numerous and varying safety, efficacy and other regulatory requirements of other jurisdictions, including potential additional clinical trials and/or non-clinical studies. Approval procedures vary among jurisdictions and can involve additional testing and additional administrative review periods. The time required to obtain approvals in other jurisdictions might differ from that required to obtain FDA approval. The marketing approval processes in other jurisdictions may implicate all of the risks detailed above regarding FDA approval in the United States as well as other risks. In particular, in many countries outside of the United States, products must receive pricing and reimbursement approval before the product can be commercialized. Obtaining this approval can result in substantial delays in bringing products to market in such countries. Marketing approval in one jurisdiction does not necessarily ensure marketing approval in another, but a failure or delay in obtaining marketing approval in one country may have a negative effect on the regulatory process or commercial activities in others. Failure to obtain marketing approval in other countries or any delay or other setback in obtaining such approval would impair our ability to market a product candidate in such foreign markets. Any such impairment would reduce the size of our potential market, which could have a material adverse impact on our business, financial condition, results of operations and prospects.

Our future growth depends, in part, on our ability to penetrate foreign markets, where we would be subject to additional regulatory burdens and other risks and uncertainties.

The prevalence of FA is estimated to be approximately three times greater in the European Union than in the United States, and, therefore, represents our largest potential market for CTI-1601. Our future profitability will depend, in part, on our ability to commercialize CTI-1601 and future product candidates in the European Union and other foreign markets for which we may rely on collaborations with third parties. If we commercialize a product candidate in foreign markets, we would be subject to additional risks and uncertainties, including:

•

our customers’ ability to obtain reimbursement for a product candidate in foreign markets;

•

compliance with the FCPA;

•

our inability to directly control commercial activities because we may need to rely on third parties;

•

the burden of complying with complex and changing foreign regulatory, tax, accounting and legal requirements;

•

different medical practices and customs in foreign countries affecting acceptance in the marketplace;

•

import or export licensing requirements;

•

longer accounts receivable collection times;

•

longer lead times for shipping;

•

language barriers for technical training;

•

reduced protection of intellectual property rights in some foreign countries;

•

foreign currency exchange rate fluctuations; and

53

•

the interpretation of contractual provisions governed by foreign laws in the event of a contract dispute.

Sales in the European Union and other foreign markets of a product candidate could also be adversely affected by the imposition of governmental controls, political and economic instability, trade restrictions and changes in tariffs.

If we are unable to establish sales and marketing capabilities or enter into agreements with third parties to market and sell CTI-1601, if approved, we may not be able to generate any revenue.

We do not currently have an established infrastructure for the sales, marketing and distribution of biologic or drug products in the United States or foreign countries. In order to market a product candidate, if approved by the FDA or any other regulatory authority, we must build our sales, marketing, managerial and other non-technical capabilities or make arrangements with third parties to perform these services. If we are unable to establish adequate sales, marketing and distribution capabilities, whether independently or with third parties, or if we are unable to do so on commercially reasonable terms, our business, results of operations, financial condition and prospects will be materially adversely affected.

Even if we receive marketing approval for CTI-1601, we may not achieve broad market acceptance, which would limit the revenue that we generate from our sales.

The commercial success of CTI-1601, if developed and approved for marketing by the FDA or EMA or other applicable regulatory authorities, will depend upon the market size for, and the awareness and acceptance of CTI-1601 among the medical community, including physicians, patients, advocacy groups and healthcare payors. Market acceptance of CTI-1601, if approved, will depend on a number of factors, including, among others:

•

if the actual number of patients with FA is lower than we believe;

•

the relative convenience and ease of subcutaneous injections as the necessary method of administration;

•

the prevalence and severity of any adverse side effects associated with CTI-1601;

•

limitations or warnings contained in the labeling approved for CTI-1601 by the FDA, EMA, or other regulatory authorities, such as a “boxed” warning or if any approval that we obtain is based on a narrower definition of possible patient populations;

•

availability of alternative treatments, including any competitive FA therapies approved or in development that have been or could be approved or commercially launched prior to approval of CTI-1601;

•

the willingness of the target patient population to try new therapies and of physicians to prescribe these therapies;

•

the strength of marketing and distribution support and timing of market introduction of competitive products;

•

publicity concerning our products or competing products and treatments;

•

pricing;

•

patient acceptance of the cost and inconvenience associated with refrigerated storage for CTI-1601;

•

payor acceptance;

•

increased political pressure on pharmaceutical pricing;

•

increased pressure on orphan drug pricing for affected patient groups;

•

the impact of any future changes in U.S. healthcare, including medical financial assistance or a transition to a single-payor system;

•

the effectiveness of our sales and marketing strategies;

•

our ability to increase awareness of CTI-1601 through marketing efforts;

54

•

our ability to obtain sufficient third-party coverage or reimbursement;

•

the willingness or ability of patients to pay out-of-pocket in the absence of third-party coverage; and

•

the likelihood that the FDA may require development of a REMS, as a condition of approval or post-approval or may not agree with our proposed REMS or may impose additional requirements that limit the promotion, advertising, distribution or sales of our product candidates.

If CTI-1601 is approved but does not achieve an adequate level of acceptance by patients, advocacy groups, physicians and payors, we may not generate sufficient revenue from CTI-1601 to become or remain profitable and our business, financial condition and results of operations could be materially adversely affected. Our efforts to educate the medical community and third-party payors about the benefits of CTI-1601 may require significant resources and may never be successful.

The FDA and other regulatory agencies actively enforce the laws and regulations prohibiting the promotion of off-label uses. If we are found to have improperly promoted off-label uses, we may become subject to significant liability.

The FDA and other regulatory agencies strictly regulate the promotional claims that may be made about prescription products, such as CTI-1601 or any potential product candidates, if approved. If we receive marketing approval for CTI-1601, or any potential product candidates, physicians may prescribe our product candidates to their patients in a manner that is inconsistent with the approved label. If we are found to have promoted such off-label uses, we may become subject to significant liability. The federal government has levied large civil and criminal fines against companies for alleged improper promotion and has enjoined several companies from engaging in off-label promotion and required that they enter into corporate integrity agreements with the Office of Inspector General of the Department of Health and Human Services. The FDA has also requested that companies enter into consent decrees or permanent injunctions under which specified promotional conduct is changed or curtailed. If we cannot successfully manage the promotion of CTI-1601 or any potential product candidates, if approved, we could become subject to significant liability, which would materially adversely affect our business, financial condition and results of operations.

Additional competing technologies could emerge, adversely affecting our opportunity to generate revenue from the sale of CTI-1601, if approved.

The biotechnology and pharmaceutical industries are intensely competitive and subject to rapid and significant technological change. For example, the FDA recently approved omaveloxolone for the treatment of FA in adults and adolescents aged 16 and older. CTI-1601 will compete with omaveloxolone and other new, future approved products and may need to demonstrate compelling advantages in efficacy, convenience, tolerability and safety to be commercially successful. Other competitive factors, including biosimilar and gene therapy competition, could force us to lower prices or could result in reduced sales. Many of our current or potential competitors, either alone or with strategic partners, have significantly greater financial resources and expertise in research and development, manufacturing, non-clinical testing, conducting clinical trials, obtaining regulatory approvals, and marketing approved products than we do. New products developed by others could emerge as competitors to CTI-1601 or any other potential product candidates, resulting in CTI-1601 or other product candidates being obsolete before we are able to recover expenses incurred in connection with their development or realize revenues from any commercialized product. The pricing of our current product candidate, if and when approved for marketing, will depend, in part, on the pricing strategies adopted by our competitors. If these or other companies enact pricing strategies that impact the price we can charge for our product candidate, if approved, we may reduce our prices and our revenue and results of operations could be affected. Any new product could also affect our ability to recruit and retain clinical trial patients, to obtain and maintain designations or eligibility for expedited regulatory pathways, and to commercialize current and future product candidates. Given that we are still in a relatively early phase of development for CTI-1601, the recent approval and commercialization of omaveloxolone and the approval of any future competing technologies could provide competitors with a significant competitive advantage and may create an additional barrier to market acceptance of CTI-1601. If we are not able to compete effectively against our current and future competitors, our business will not grow and our financial condition and results of operations will be adversely affected.

Mergers and acquisitions in the pharmaceutical and biotechnology industries may result in even more resources being concentrated among a smaller number of our competitors. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established

55

companies. These competitors also compete with us in recruiting and retaining qualified scientific and management personnel and establishing clinical trial sites and patient registration for clinical trials, as well as in acquiring technologies complementary to, or necessary for, our programs. Our commercial opportunity could be reduced or eliminated if our competitors develop and commercialize products that are safer, more effective, have fewer or less severe side effects, are more convenient, or are less expensive than any products that we may develop. Our competitors also may obtain FDA, EMA or other regulatory approval for their products more rapidly than we may obtain approval for ours and may obtain orphan product exclusivity from the FDA for indications our product candidates are targeting, which could result in our competitors establishing a strong market position before we are able to enter the market. Additionally, products or technologies developed by our competitors may render our potential product candidates uneconomical or obsolete, and we may not be successful in marketing any product candidates we may develop against competitors.

We may face competition from biosimilars and may face increasing competition over time.

We may face competition from biosimilars in both the United States and Europe, and over time we may face increasing biosimilar competition. To the extent that governments adopt more permissive approval frameworks and competitors are able to obtain broader or expedited marketing approval for biosimilars, the rate of increased competition for our biologic drug products could accelerate. Expiration or successful challenge of applicable patent rights could trigger such competition, and we could face more litigation regarding the validity and/or scope of our patents. Our products may also experience greater competition from lower cost biosimilars or generics that come to market when branded products that compete with our products lose their own patent protection.

In the European Union, the European Commission has granted marketing authorizations for biosimilars pursuant to a set of general and product class-specific guidelines for biosimilar approvals issued in 2005. In addition, in an effort to spur biosimilar utilization and/or increase potential healthcare savings, some countries in the European Union have adopted biosimilar uptake measures such as requiring physician prescribing quotas or promoting switching or pharmacy substitution of biosimilars for the corresponding reference products, and other countries may adopt similar measures. Some countries in the European Union may impose automatic price reductions upon market entry of the second or third biosimilar competitor.

In the United States, the Affordable Care Act authorized the FDA to approve biosimilars via a separate, abbreviated pathway. A growing number of companies have announced that they are in varying stages of development of biosimilar versions of existing biotechnology products. Some companies pursuing development of biosimilars may challenge our patents well in advance of the expiration of our material patents. The U.S. pathway includes the option for biosimilar products meeting certain criteria to be approved as interchangeable with their reference products. Some companies developing biosimilars may seek to register their products as interchangeable biologics, which could make it easier for prescribers or pharmacists to substitute those biosimilars for our products. In addition, critics of the 12-year exclusivity period in the biosimilar pathway law will likely continue to seek to shorten the data exclusivity period and/or to encourage the FDA to interpret narrowly the law’s provisions regarding which new products receive data exclusivity. While we are unable to predict the precise impact of biosimilars, we expect in the future for there to be greater competition in the United States as a result of biosimilars and downward pressure on product prices and sales. These biosimilars or generics may affect the tier designation by third party payors and may require prior authorization for use of CTI-1601, thereby adding barriers to access. This additional competition could have a material adverse effect on our business, financial condition and results of operations.

Risks Related to Our Business

If we are unable to manage expected growth in the scale and complexity of our operations, including attracting and hiring additional qualified management, our performance may suffer.

We are an early-stage clinical biotechnology company with a small number of employees, and our management systems currently in place are not likely to be adequate to support our future growth plans. As a result, we are highly dependent on our management and scientific personnel. The loss of the services of any of our executive officers, other key employees or consultants and other scientific advisors in the foreseeable future, might impede the achievement of our research, development and commercialization objectives. Competition for qualified personnel in the biopharmaceutical field is intense due to the limited number of individuals who possess the skills and experience required by our industry. We will need to hire additional personnel as we expand our clinical development and if we initiate commercial activities. We may not be able to attract and retain quality personnel on acceptable terms, or at all. In addition, to the extent we hire personnel from competitors, we may be subject to

56

allegations that they have been improperly solicited or that they have divulged proprietary or other confidential information, or that their former employers own their research output.

We rely on consultants and advisors, including scientific, non-clinical, manufacturing and clinical advisors, to assist us in formulating our development and commercialization strategy. These consultants and advisors may be employed by other employers and may have commitments under consulting or advisory contracts with other entities that may limit their availability to us. The loss of the services of our executive officers or other key employees could impede the achievement of our research, development and commercialization objectives and seriously harm our ability to successfully implement our business strategy. Furthermore, replacing executive officers and key employees may be difficult and may take an extended period of time because of the competition for talent, particularly with the limited number of individuals in our industry with the breadth of skills and experience required to successfully develop, gain regulatory approval of and commercialize products. In addition, a possible resurgence of vaccine resistant or more highly contagious or deadly variants of COVID-19 or other health epidemics may pose a risk to our ability to retain and rely on our executive officers and key employees, including the potential that one or more of such employees or members of their families may contract the virus, which could impact the ability of such employees to perform as expected, which in turn would adversely impact our current and planned operations.

Recruiting and retaining qualified scientific, medical clinical, manufacturing, quality assurance, regulatory, legal, public company financial, business, sales, marketing and commercial personnel and implementing and improving our operational, financial and management systems will be critical to our ability to grow and succeed. These demands also will require the hiring of additional executive or management-level personnel or the development of additional expertise by our senior management personnel. Hiring a significant number of additional employees, particularly those at the executive or management level, would increase our expenses significantly. In addition, we may not be able to attract and retain these personnel on acceptable terms given the competition among numerous pharmaceutical companies for similar personnel. A possible resurgence of vaccine resistant, more contagious or more highly contagious variants of COVID-19 or other health epidemics may pose may also affect our ability to attract and successfully recruit these personnel, for one or more reasons. We also experience competition for the hiring of scientific personnel from universities and research institutions. Moreover, delays or failures in clinical trials may also make it more challenging to recruit and retain qualified scientific personnel. If we are unable to continue to attract and retain high quality personnel, our ability to pursue our business strategy will be limited and our business, financial condition and results of operations would be adversely affected.

Further, if we fail to expand and enhance our operational, financial and management systems in conjunction with potential future growth, such failure could have a material adverse effect on our business, financial condition and results of operations. We may be unable to successfully implement these tasks on a larger scale and, accordingly, may not achieve our research, development, business and growth goals.

Our internal computer systems, or those of any vendors, contractors or consultants, may fail or suffer security breaches, which could result in a material disruption of our product development programs.

Despite the implementation of security measures, our internal computer systems and those of third parties with which we contract are vulnerable to damage from cyber-attacks, computer viruses, unauthorized access, natural disasters, terrorism, war and telecommunication and electrical failures. The prevalent use of mobile devices that access confidential information also increases the risk of lost or stolen devices, security incidents and data security breaches, which could lead to the loss of confidential information or other intellectual property. Any system failure, accident or security breach that causes interruptions in our operations could result in a material disruption of our product development programs and business operations, in addition to possibly requiring substantial expenditures of resources to remedy. For example, the loss of clinical trial data from completed clinical trials could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the data. To the extent that any disruption or security breach results in a loss or damage to our data or applications, or inappropriate disclosure of confidential or proprietary information, we may incur liabilities and the further development of our product candidates may be delayed. In addition, we may not have adequate insurance coverage to provide compensation for any losses associated with such events.

We could be subject to risks caused by misappropriation, misuse, leakage, falsification or intentional or accidental release or loss of information maintained in the information systems and networks of our company, including personal information of our employees. In addition, outside parties may attempt to penetrate our systems or those of our vendors or fraudulently induce our employees or employees of our vendors to disclose sensitive information in order to gain access to our data. Like other companies, we may experience threats to our data and

57

systems, including malicious codes and viruses, and other cyber-attacks. The number and complexity of these threats continue to increase over time. If a material breach of our security or that of one or more of our vendors, contractors or consultants occurs, the market perception of the effectiveness of our security measures could be harmed, we could lose business and our reputation and credibility could be damaged, all of which would materially adversely affect our business, financial condition and results of operations. We could be required to expend significant amounts of money and other resources to repair or replace information systems or networks. Although we develop and maintain systems and controls designed to prevent these events from occurring, the development and maintenance of these systems, controls and processes is costly and requires ongoing monitoring and updating as technologies change and efforts to overcome security measures become more sophisticated. Moreover, despite our efforts, the possibility of these events occurring cannot be eliminated entirely.

We may acquire businesses or products, or form strategic alliances, in the future, and we may not realize the benefits of such acquisitions or alliances.

We may acquire additional businesses or products, form strategic alliances or create joint ventures with third parties that we believe will complement or augment our existing business. If we acquire businesses with promising markets or technologies, we may not be able to realize the benefit of such transactions if we are unable to successfully integrate such businesses with our existing operations and company culture.

We may encounter numerous difficulties in developing, manufacturing and marketing any new products resulting from a strategic alliance or acquisition that delays or prevents us from realizing their expected benefits or enhancing our business. We cannot be certain that, following any such transaction, we will achieve the expected synergies to justify the transaction and it could adversely affect our business, financial condition and results of operations.

We may seek to establish collaborations and, if we are not able to establish them on commercially reasonable terms, we may have to alter our development and commercialization plans or expand our internal efforts and growth.

Our development programs and the potential commercialization of our product candidates will require substantial additional cash to fund expenses. For CTI-1601, and any future product candidates, we may decide to collaborate with pharmaceutical and/or biotechnology companies for the development and potential commercialization of those product candidates in some or all markets.

We face significant competition in seeking appropriate collaborators. Whether we reach a definitive agreement for a collaboration for CTI-1601 or other potential product candidates will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed collaborator’s evaluation of a number of factors. Those factors may include the design or results of clinical trials, the likelihood of approval by the FDA or similar regulatory authorities outside the United States, the potential market for the applicable product candidate, the costs and complexities of manufacturing and delivering such product candidate to patients, the potential of competing products, the existence of uncertainty with respect to our ownership of technology, which can exist if there is a challenge to such ownership without regard to the merits of the challenge and industry and market conditions generally. The collaborator may also consider alternative product candidates or technologies for similar indications that may be available to collaborate on and whether such collaboration could be more attractive than the one with us for our product candidate. The terms of any collaboration or other arrangement that we may establish may not be favorable to us.

We may also be restricted under existing license agreements from entering into future agreements on certain terms with potential collaborators. Collaborations are complex and time-consuming to negotiate and document. In addition, there have been a significant number of recent business combinations among large pharmaceutical companies that have resulted in a reduced number of potential future collaborators.

We may not be able to negotiate collaborations on a timely basis, on acceptable terms, or at all. If we are unable or unwilling to do so, we may have to curtail the development potential product candidates for which we are seeking to collaborate, reduce or delay our development program or one or more of our other development programs, delay potential commercialization in some or all markets or reduce the scope of any sales or marketing activities, or increase our expenditures and undertake development or commercialization activities at our own expense, including potentially increasing our infrastructure and investment outside the United States. If we elect to increase our expenditures to fund development or commercialization activities on our own, we will need to obtain additional capital, which may not be available to us on acceptable terms if at all. If we do not have sufficient funds,

58

we may not be able to further develop our product candidates or bring them to market and generate product revenue. In addition, such efforts may require diversion of a disproportionate amount of our attention away from other day-to-day activities and require devotion of a substantial amount of our time to managing these activities.

In addition, any future collaborations that we enter into may not be successful. The success of our collaboration arrangements will depend heavily on the efforts and activities of our collaborators. Collaborators generally have significant discretion in determining the efforts and resources that they will apply to these collaborations. Disagreements between parties to a collaboration arrangement regarding clinical development and commercialization matters can lead to delays in the development process or commercializing the applicable product candidate and, in some cases, termination of the collaboration arrangement. These disagreements can be difficult to resolve if neither of the parties has final decision-making authority. Collaborations with pharmaceutical or biotechnology companies and other third parties often are terminated or allowed to expire by the other party. Any such termination or expiration could adversely affect our business, financial condition, results of operations and could harm our business reputation.

We face risks related to health epidemics, and/or other outbreaks of communicable diseases, which could significantly disrupt our operations and may materially and adversely affect our business and financial conditions.

Our business could be adversely impacted by the effects of a global health epidemics, such as, for example, a possible resurgence of vaccine resistant or more highly contagious or deadly variants of COVID-19 and the efforts to mitigate such outbreaks. Such global outbreaks of communicable diseases globally could materially and adversely impact our operations, including without limitation, our manufacturing and supply chain for CTI-1601 and our planned clinical trials, which have faced, and could continue to face, enrollment difficulties as hospitals or clinical trials sites experience closures. Because FA is a rare disease, there are a limited number of patients in close proximity to clinical trial sites and clinical trial patients travel from throughout the United States to clinical trial sites to participate. Any travel advisories or infection risks could present increased risks to patients traveling to a clinical trial site for dosing if clinical trials are allowed to continue. These events could delay our clinical trials, increase the cost of completing our clinical trials and negatively impact the integrity, reliability or robustness of the data from our clinical trials. In addition, employee health and availability could be impacted, which may have a material and adverse effect on our business, financial condition and results of operations. Future pandemics could adversely affect global economies and financial markets resulting in an economic downturn that could have a material adverse effect on our business and prospects.

Compliance with global privacy and data security requirements could result in additional costs and liabilities to us or inhibit our ability to collect and process data globally, and the failure to comply with such requirements could expose us to criminal sanctions, civil penalties, contractual damages, reputational harm, administrative burdens and diminished profits and future earnings.

The regulatory framework for the collection, use, safeguarding, sharing, transfer and other processing of information worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. Globally, virtually every jurisdiction in which we may operate has established its own data security and privacy frameworks with which we must comply. For example, the European Union’s General Data Protection Regulation 2016/679 ("EU GDPR"), the UK General Data Protection Regulation (“UK GDPR”, together with the EU GDPR, the “GDPR”) and UK Data Protection Act 2018, which impose strict obligations on the processing of personal data, including personal health data, and the free movement of such data. The GDPR applies to any company established in the European Economic Area/ United Kingdom ("EEA/UK") as well as any company outside the EEA/UK Union that processes personal data in connection with the offering of goods or services to individuals in the EEA/UK or the monitoring of their behavior. The GDPR enhances data protection obligations for processors and controllers of personal data, including, for example, obligations relating to: processing health and other sensitive data; obtaining consent of individuals; providing notice to individuals regarding data processing activities; responding to data subject requests; taking certain measures when engaging third-party processors; notifying data subjects and regulators of data breaches; implementing safeguards to protect the security and confidentiality of personal data; and strict rules and restrictions on the international transfers of personal data.

The GDPR prohibits the transfer of personal data to countries outside the EEA/UK, which are not considered by the European Commission and UK government as providing an “adequate” protection of personal data, including the United States, unless a valid GDPR transfer mechanism (for example, the European Commission approved Standard Contractual Clauses (“SCCs”) and the UK International Data Transfer Agreement/Addendum (“UK

59

IDTA”)) has been put in place. Where relying on the SCCs /UK IDTA for data transfers, we may also be required to carry out transfer impact assessments to assess whether the recipient is subject to local laws which allow public authority access to personal data. The international transfer obligations under the EEA/UK data protection regimes will require significant effort and cost and may result in us needing to make strategic considerations around where EEA/UK personal data is transferred and which service providers we can utilize for the processing of EEA/UK personal data. Although the UK is regarded as a third country under the EU GDPR, the European Commission has issued a decision recognizing the UK as providing adequate protection under the EU GDPR (“Adequacy Decision”) and, therefore, transfers of personal data originating in the EEA to the UK remain unrestricted. The UK government has confirmed that personal data transfers from the UK to the EEA remain free flowing. The UK Government has also introduced a Data Protection and Digital Information Bill (“UK Bill”) into the UK legislative process. The aim of the UK Bill is to reform the UK’s data protection regime following Brexit. If passed, the final version of the UK Bill may have the effect of further altering the similarities between the UK and EEA data protection regime and threaten the UK Adequacy Decision from the EU Commission. This may lead to additional compliance costs and could increase our overall risk. The respective provisions and enforcement of the EU GDPR and UK GDPR may further diverge in the future and create additional regulatory challenges and uncertainties.

The GDPR imposes additional obligations and risks upon our business and substantially increases the penalties to which we could be subject in the event of any non-compliance, including fines of up to €20 million or 4% of total worldwide annual revenue, whichever is higher. The GDPR also confers a private right of action on data subjects and consumer associations to lodge complaints with supervisory authorities, seek judicial remedies and obtain compensation for damages. Given the breadth and depth of changes in data protection obligations, if we are required to comply with the GDPR’s requirements, we will be required to spend significant time and resources to review our technologies, systems and practices, as well as those of any third-party service providers, contractors or consultants that process or transfer personal data collected in the EEA/UK. The GDPR and other changes in laws or regulations associated with the enhanced protection of certain types of sensitive data, such as healthcare data or other personal information from our clinical trials, could require us to change our business practices or lead to government enforcement actions, private litigation or significant fines and penalties against us, reputational harm and could have a material adverse effect on our business, financial condition or results of operations.

Our computer systems, or those of any of our CROs, manufacturers, other contractors or consultants or potential future collaborators, may fail or suffer security or data privacy breaches or other unauthorized or improper access to, use of, or destruction of our proprietary or confidential data, employee data, or personal data, which could result in additional costs, loss of revenue, significant liabilities, harm to our brand and material disruption of our operations.

Despite the implementation of security measures in an effort to protect systems that store our information, given their size and complexity and the increasing amounts of information maintained on our internal information technology systems, and those of our third-party CROs, other contractors (including sites performing our clinical trials) and consultants, these systems are potentially vulnerable to breakdown or other damage or interruption from service interruptions, system malfunction, natural disasters, terrorism, war and telecommunication and electrical failures, as well as security breaches from inadvertent or intentional actions by our employees, contractors, consultants, business partners, and/or other third parties, or from cyber-attacks by malicious third parties (including supply chain cyber-attacks or the deployment of harmful malware, ransomware, denial-of-service attacks, social engineering and other means to affect service reliability and threaten the confidentiality, integrity and availability of information), which may compromise our system infrastructure or lead to the loss, destruction, alteration, prevention of access to, disclosure, or dissemination of, or damage or unauthorized access to, our data (including trade secrets or other confidential information, intellectual property, proprietary business information, and personal information) or data that is processed or maintained on our behalf, or other assets, which could result in financial, legal, business and reputational harm to us. Companies have, in general, experienced an increase in phishing and social engineering attacks from third parties, and the increase in remote working further increases security threats. To the extent that any disruption or security incident were to result in any loss, destruction, unavailability, alteration, disclosure, or dissemination of, or damage or unauthorized access to, our applications, any other data processed or maintained on our behalf or other assets, or for it to be believed or reported that any of these occurred, we could incur liability, financial harm and reputational damage and the development and commercialization of our product candidates could be delayed. We cannot ensure that our data protection efforts and our investment in information technology, or the efforts or investments of CROs, consultants or other third parties, will prevent significant breakdowns or breaches in systems or other cyber incidents that cause loss, destruction, unavailability, alteration or dissemination of, or damage

60

or unauthorized access to, our data and other data processed or maintained on our behalf or other assets that could have a material adverse effect upon our reputation, business, operations or financial condition. For example, if such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our programs and the development of our product candidates could be delayed. In addition, the loss of clinical trial data for our product candidates could result in delays in our marketing approval efforts and significantly increase our costs to recover or reproduce the data. Further, any such event that leads to loss, damage, or unauthorized access to, or use, alteration, or disclosure or dissemination of, personal information, including personal information regarding our clinical trial subjects or employees, could harm our reputation directly, compel us to comply with federal and/or state breach notification laws and foreign law equivalents, subject us to mandatory corrective action, and otherwise subject us to liability under laws and regulations that protect the privacy and security of personal information, which could result in significant legal and financial exposure and reputational damages that could potentially have an adverse effect on our business.

Notifications and follow-up actions related to a security incident could impact our reputation and cause us to incur significant costs, including legal expenses and remediation costs. For example, the loss of clinical trial data from completed or future clinical trials could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the lost data. We expect to incur significant costs in an effort to detect and prevent security incidents, and we may face increased costs and requirements to expend substantial resources in the event of an actual or perceived security incident. We also rely on third parties to manufacture our product candidates, and similar events relating to their computer systems could also have a material adverse effect on our business. To the extent that any disruption or security incident were to result in any loss, destruction, or alteration of, or damage or unauthorized access to, our data or other information that is processed or maintained on our behalf, or inappropriate disclosure of or dissemination of any such information, we could be exposed to litigation and governmental investigations, the further development and commercialization of our product candidates could be delayed, and we could be subject to significant fines or penalties for any noncompliance with certain state, federal and/or international privacy and security laws.

Our insurance policies may not be adequate to compensate us for the potential losses arising from any such disruption in or, failure or security breach of our systems or third-party systems where information important to our business operations or commercial development is stored. In addition, such insurance may not be available to us in the future on economically reasonable terms, or at all. Further, our insurance may not cover all claims made against us and could have high deductibles in any event, and defending a suit, regardless of its merit, could be costly and divert management attention.

We face potential product liability exposure, and, if claims are brought against us, we may incur substantial liability.

The use of CTI-1601 and other potential product candidates in clinical trials, if any, and the sale of CTI-1601 and other potential product candidates, if developed and approved, exposes us to the risk of product liability claims. Product liability claims might be brought against us by patients, healthcare providers or others selling or otherwise coming into contact with CTI-1601 or other potential product candidates. For example, we may be sued if any product we develop allegedly causes injury or death or is found to be otherwise unsuitable during product testing, manufacturing, marketing or sale. Physicians and patients may not comply with any warnings that identify known potential adverse effects and patients who should not use our products. If we cannot successfully defend ourselves against product liability claims, we may incur substantial liabilities or be required to stop development or, if approved, limit commercialization of our product candidates. Any such product liability claims may include allegations of defects in manufacturing, defects in design, a failure to warn of dangers inherent in the product, including as a result of interactions with alcohol or other drugs, negligence, strict liability and a breach of warranties. Claims could also be asserted under consumer protection acts in other jurisdictions. If we become subject to product liability claims and cannot successfully defend ourselves against them, we could incur substantial liabilities. In addition, regardless of merit or eventual outcome, product liability claims may result in, among other things:

•

withdrawal of patients or clinical investigators from our clinical trials;

•

delay or termination of clinical trials;

•

substantial monetary awards to patients or other claimants;

61

•

decreased demand for CTI-1601 or our other potential product candidates following marketing approval, if obtained;

•

damage to our reputation and exposure to adverse publicity;

•

increased FDA warnings on product labels;

•

initiation of investigations by regulators or ethics committees;

•

product recalls, withdrawals, or labeling, marketing or promotional restrictions;

•

litigation costs;

•

distraction of management’s attention from our primary business;

•

increased product liability costs;

•

loss of revenue; and

•

the inability to successfully commercialize CTI-1601 or other potential product candidates, if approved.