Item 1A.Risk Factors.

You should carefully consider the risks described below, as well as the other information in this Annual Report, including our audited consolidated financial statements and the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The occurrence of any of the events or developments described below could adversely affect our business, financial condition, results of operations and growth prospects. In such an event, the market price of our Class A ordinary shares could decline. Additional risks and uncertainties not presently known to us or that we currently deem immaterial also may impair our business operations.

Risks Related to Commercialization

We may not be able to continue to commercialize ARCALYST or be successful in commercializing any future products, potentially impairing the commercial potential for our current and future products to generate any revenue.

Since our commercial launch of ARCALYST, we have focused on establishing and expanding our internal capabilities, including but not limited to, sales, marketing, distribution, access and patient support services as well as contracting with third parties to perform certain services. Each aspect of commercialization on its own can be complex, expensive and time consuming, and, collectively, the required effort for coordination is intensive. While we have realized revenues from such efforts, there is no guarantee that we will be able to maintain the trajectory of growth or significant and sustained revenues in the long-term.

In addition, our continued commercialization of ARCALYST or successful commercialization of any of our current or future product candidates, if approved, could be materially adversely impacted by a number of foreseen and unforeseen factors, including:

●any delays in our ability to produce sufficient quantities of ARCALYST, or any of our future products, at an acceptable cost or quality, including such delays arising out of quality assurance concerns or changes in regulatory guidance, or those caused by our reliance on our third party manufacturers;

Table of Contents

●our inability to recruit, train and retain adequate numbers of effective sales, marketing, access, and payor and patient support personnel;

●the inability of sales personnel to obtain access to prescribers and accounts;

●an inadequate number of prescribers or accounts prescribing our current and future products;

●the lack of complementary products to be supported by sales personnel, which may put us at a competitive disadvantage relative to companies with more extensive product lines;

●an absence or reduction in strong scientific-based relationships to drive disease awareness and education;

●our inability to establish the unmet medical need for a given disease;

●our inability to provide acceptable evidence of safety and efficacy;

●our inability to enable our products to be viewed as the product of choice within any indications for which they are approved;

●the prevalence and severity of side effects associated with any future product;

●our inability to compete with current or future competitor products and/or biosimilars;

●the convenience and ease of administration of our products relative to alternative therapies, if any;

●our inability or delay in gaining or maintaining reimbursement and broad patient access at a price that reflects the value of ARCALYST or any of our future products;

●our inability to address product labeling or product insert requirements, including any changes mandated by regulatory authorities after initial approval;

●our inability to equip customer-facing personnel with effective materials, including medical and sales literature to help them educate physicians and other healthcare professionals regarding applicable diseases relevant to ARCALYST or any of our future products;

●any delays in the ongoing technology transfer of the process for manufacturing ARCALYST drug substance;

●our inability to provide prescribers and patients adequate support and training to build comfort around the preparation and administration process to initiate and continue to use ARCALYST or any of our future products;

●our inability to develop or sustain robust patient support programs to optimize the patient and customer experience with ARCALYST or any of our future products;

●publications of scientific literature, consensus papers and treatment guidelines unfavorable to the administration of our products and product candidates and/or the positioning of the class of drugs to which each of our products and product candidates belongs;

●our inability to develop or obtain and sustain sufficient operational functions and infrastructure to support our commercial activities;

Table of Contents

●our inability to establish and maintain patent and trade secret protection or regulatory exclusivity for our products;

●our inability to enforce and defend our intellectual property rights and claims; and

●unforeseen costs and expenses associated with creating and maintaining a sales, marketing, and access organization.

If we experience any such factors that inhibit our efforts to commercialize ARCALYST or any of our product candidates, if approved, our business, results of operations, financial condition and prospects may be materially adversely affected.

We rely on a select network of third party specialty pharmacies to market and sell ARCALYST that may not meet our or our patients’ needs.

We rely on a select network of third party specialty pharmacies to distribute ARCALYST and expect to use a similar strategy for our current and future product candidates, if approved. We rely on such specialty pharmacies to effectively distribute products in a timely manner, provide certain patient support services, manage prescription intake, collect accurate patient and inventory data and collect payments from payors. While we have entered into agreements with each of these specialty pharmacies, they may not perform as agreed, our strategic priorities may change or they may terminate their agreements with us. Further, an inability of our specialty pharmacies to meet our patients’ needs may lead to reputational harm or patient loss. In the event that such network fails to properly meet our or our patients’ needs, we may need to partner with other specialty pharmacies to replace or supplement our current network and there is no guarantee that we will be able to do so on commercially reasonable terms or at all. In addition, there is a risk that patients may discontinue or suspend their ARCALYST treatment in the process of transitioning between specialty pharmacies, and it may take time to re-integrate such patients into our network, if at all. In such an event our business, results of operations, financial condition and prospects may be materially affected.

The successful commercialization of our current and future products, if any, will depend in part on the extent to which third party payors, including governmental authorities and private health insurers, provide funding, establish and maintain favorable coverage and pricing policies and set adequate reimbursement levels.

Our ability to continue to commercialize ARCALYST in its approved indications or any of our future products, if any, particularly in orphan or rare disease indications, will depend in part on the availability of favorable coverage, the adequacy of reimbursement (including affordability of patient cost-sharing obligations) for ARCALYST or the future product and alternative treatments from third party payors (e.g., governmental authorities, private health insurers and other organizations). We currently enjoy largely favorable coverage and reimbursement from third party payors for ARCALYST in the approved recurrent pericarditis indication and seek to maintain such favorable coverage and reimbursement. We cannot be certain we will continue to effectively execute our coverage and reimbursement strategy in the markets we pursue, which could limit the future commercial potential of ARCALYST in the approved recurrent pericarditis indication or any of our product candidates, if approved.

Governmental authorities, private health insurers and other third party payors have attempted to control costs through a number of efforts, including by delaying the time to reimbursement, by restricting the breadth of coverage, implementing utilization management controls such as requiring prior authorization, limiting the amount of reimbursement for particular products and increasing the proportion of the cost for which the patient is responsible. There may be significant delays in obtaining reimbursement for newly approved products or product indications, coverage may be limited to a subset of the patient population for which the treatment is approved by the FDA or similar regulatory authorities outside the United States including health technology assessment bodies in the EU and United Kingdom, and reimbursement rates may vary according to the use of the product and the clinical setting in which it is used. Coverage and reimbursement barriers by payors may materially impact the demand for, or the price at which we can sell, ARCALYST and any product candidate for which we obtain marketing approval, if any. If coverage and reimbursement are not available, or available only at limited levels, or if such coverage will require patient out-of-pocket costs that are unacceptably high, our ability to successfully commercialize ARCALYST or any of the product candidates

Table of Contents

for which we obtain marketing approval may be adversely affected. Moreover, any coverage or reimbursement that may be obtained may be decreased or eliminated in the future. For example, in January 2023, one of the large private health insurers that currently covers ARCALYST placed ARCALYST on its exclusion list for the CAPS indication, which could create hurdles for new patients seeking coverage for their prescriptions in all indications. In addition, obtaining and maintaining favorable coverage and adequate reimbursement may require us to offer pricing concessions to third party payors.

We may also be unable to adequately satisfy a third party payor’s value/benefit assessment on an ongoing basis. It is possible that third party payors will select low-cost clinical comparators that serve as benchmarks for determining relative value, including biosimilars and lower costs brands with or without the same approved indication. The result of such a change would be a more challenging value/benefit assessment and the potential for a worse relative outcome, including such payors refusing to provide coverage and reimbursement entirely, or finding the evidence not sufficiently compelling to support our desired pricing and reimbursement. Similarly, payors may implement coverage criteria that further restrict the use of ARCALYST or any of our product candidates, if approved, beyond the approved label, which could adversely affect their commercial potential, including, for example, situations where a patient must be proven to not adequately respond to the lower-cost comparator before the payer will cover the use of ARCALYST or any of our product candidates, if approved.

We may be unable to sustain any favorable coverage and reimbursement on an ongoing basis. Third party payors may also revisit their previously established coverage policies from time to time including their assessment of the relative value/benefit provided by a drug product compared to clinical alternatives, such as any competitive products with the same or similar indications and biosimilars. It is possible that a third party payor may consider our products and product candidates, if approved, as substitutable and only be willing to cover the cost of the alternative product. Even if we show improved efficacy, safety or improved convenience of administration with ARCALYST or any of our product candidates, if approved, pricing of competitive products may limit the amount we will be able to charge. Third party payors often introduce more challenging price negotiation methodologies when competitors exist or enter into the market. Third party payors may deny or revoke the reimbursement status of a given product or establish prices for new or existing marketed products at levels that are too low to enable us to realize an appropriate return on our investment in our product candidates. In some cases, when new competitor biosimilar products enter the market, there are mandatory price reductions for the innovator product. In other cases, payors employ “therapeutic category” price referencing and seek to lower the reimbursement levels for all treatment in the respective therapeutic category. Additionally, new competitor brand drugs can trigger therapeutic category reviews in the interest of modifying coverage and/or reimbursement levels. The potential of third party payors to introduce more challenging price negotiation methodologies could have a negative impact on our ability to continue to commercialize ARCALYST or successfully commercialize any of our product candidates, if approved. Third party payors may also employ challenging price negotiation tactics in the event of a proposed price increase of our current and future products. See “Risk Factors—Risks Related to Commercialization – It may be difficult for us to realize the benefit of increasing the price of certain of our commercialized products.”

It may be difficult for us to realize the benefit of increasing the price of certain of our commercialized products.

We have and may continue to periodically increase the price of ARCALYST and may implement similar pricing practices for future products, if approved, and may be unable to realize commercial benefits from such price increases due to unfavorable actions that third party payors (including governmental authorities and private health insurers) may take in response. Even if price increases lie below contractual price protection clauses, payors may request price concessions in exchange for covering our products or may opt to change coverage or reimbursement policies with respect to such products. If we cannot successfully negotiate with such payors, we may be forced to provide significant price concessions or, if we fail to arrive at a satisfactory resolution, lose favorable coverage or reimbursement for patients served by such payor. In such an event, patients may have difficulty obtaining access to, or affording, such products and we may see materially negative impacts on our business operations.

Any price concessions will reduce our overall revenue generation and may impair the benefit of any price increases we may take. Price concessions that reduce our product revenue may require us to rely on potentially dilutive capital-raising efforts to fund our operations, which may impact the price of our ordinary shares. Even comparatively

Table of Contents

small discounts, if aggregated across payors, may cause materially lower revenue generation in the long-term, which may offset the increased revenue we hoped to realize through a price increase.

Further, granting price concessions to one or more payors may limit our ability to negotiate prices with other payors or in other territories. Payors, including governmental payors, negotiate drug prices by reference to the prices we have set with other payors. Should payors become aware of price concessions that we have granted, they may request similar concessions. If enough payors request and receive price concessions, our ability to generate revenue may be materially impacted, harming our business, financial condition and results of operations. Further, this may limit our ability to secure acceptable prices in potential new territories, which may materially limit our overall commercial growth. A limitation on our ability to commercialize in new and existing territories may also reduce our access to the patient populations we seek to serve, harming our ability to deliver therapeutics to patients with unmet medical need.

In the event that we cannot successfully negotiate with payors requesting price concessions in connection with a price increase or otherwise, such payors may choose to not cover our current and future products at all or may impose onerous reimbursement policies that limit patient access. We cannot assure you that current payor coverage and reimbursement policies for ARCALYST will continue. The loss of any payor, especially a large payor, or limitations on access to our drugs affecting a sizeable number of patients may materially harm our ability to generate revenue and execute on our commercial strategy. Further, as a company targeting patients with significant unmet medical need, the loss of access to our products may materially harm our targeted patient populations who cannot source adequate alternative therapies.

We are also required to provide discounts or rebates under government healthcare programs or to certain government and private purchases in order to obtain coverage under federal healthcare programs. In addition, price increases that outpace inflation may also trigger additional rebate obligations, including under the Medicaid Drug Rebate Program.

The incidence and prevalence for target patient populations of our products or product candidates have not been established with precision. If the market opportunities for our products and product candidates are smaller than we estimate, or if any approval that we obtain is based on a narrower definition of our targeted patient population, our revenue and ability to achieve profitability may be materially adversely affected.

The precise incidence and prevalence for all the conditions we aim to address with our programs are not known with specificity. Our projections of both the number of people who have these diseases, as well as the subset of people with these diseases who have the potential to benefit from treatment with our products and product candidates, if approved, are based largely on our extrapolation from available population studies and estimates. These estimates have been derived from a variety of sources, including scientific literature, surveys of clinics, patient foundations, pharmacy claims analyses, large national surveillance databases or market research, and may prove to be incorrect. Further, new trials and therapeutic options may lead to changes in the estimated incidence or prevalence of these diseases, or relevant subpopulations thereof. As a result, the number of patients who may benefit from our products or product candidates, if approved, may turn out to be lower than expected.

The total addressable market for ARCALYST and any other of our current or future product candidates, if approved, will ultimately depend upon, among other things, the diagnostic criteria and applicable patient population included in the final label for the product or product candidate approved for sale for its indication; the efficacy, safety and tolerability demonstrated by the product candidate in our clinical trials; acceptance by the medical community; and patients, pricing, access and reimbursement. The number of addressable patients in the United States and other major markets outside of the United States may turn out to be lower than expected, patients may not be otherwise amenable to treatment with our products or new patients may become increasingly difficult to identify or gain access to, all of which would adversely affect our results of operations and our business. Further, even if we obtain significant market share for our product candidates, because the potential target populations are small for many of our approved and targeted indications, we may never achieve significant and sustained profitability.

Table of Contents

Evolving health policy and associated legislative changes related to coverage and reimbursement aimed at lowering healthcare expenditures could impact the commercialization of our product candidates. Pharmaceutical pricing has been, and likely will continue to be, a central component of these efforts.

The regulations that govern regulatory approvals, pricing and reimbursement for new pharmaceutical products vary widely from country to country. In markets of some of the countries we may pursue outside of the United States, our products and product candidates, if approved, may be subject to extensive governmental price control or other price regulations. Some countries require approval of the sale price of a drug before it can be marketed. In many countries, the pricing review period begins after marketing approval is granted. In some markets, prescription pharmaceutical pricing remains subject to continuing governmental control even after initial approval is granted. As a result, we might obtain marketing approval for a product candidate in a particular country but then be subject to price negotiations that delay our commercial launch of the product candidate in that country, possibly for lengthy time periods, which may negatively impact the revenues we are able to generate from the sale of the product candidate in that country.

Net prices for products may be reduced by mandatory discounts or legislated rebates that must be paid in order to participate in government healthcare programs or paid to other third party payors. Mandatory discounts can be legislated at any time in any market. Similarly, some markets currently have pricing legislation that sets the price of a pharmaceutical product in their market by referencing the price of that product in other markets, known as international reference pricing. International reference pricing has the potential to impact price cut decisions in individual countries and the countries that reference the pricing of certain other individual countries.

Drug importation and cross-border trade, both sanctioned and unsanctioned, occurs when a pharmaceutical product from a market where the official price is set lower is shipped and made commercially available in a market where the official price is set higher. Any future relaxation of laws that presently restrict or limit drug importation or cross-border trade, including in the United States, could have a material negative impact on our ability to commercialize ARCALYST or any of our product candidates, if approved.

As a result of the foregoing, we may not be able to achieve or sustain favorable pricing for ARCALYST or any of our product candidates, if approved, and adequate reimbursement, which may hinder our ability to recoup our investment in such drugs.

For more information, see “Risk Factors – General Risk Factors – Enacted and future healthcare legislation may have a material adverse effect on our business and results of operations.”

Product liability lawsuits against us could cause us to incur substantial liabilities and could limit commercialization of ARCALYST and any product candidates that we may develop, if approved.

We face an inherent risk of product liability exposure related to the commercialization of ARCALYST and the testing of our product candidates in clinical trials and other research activities. If we cannot successfully defend ourselves against claims that our products or product candidates caused injuries, we could incur substantial liabilities. Regardless of merit or eventual outcome, liability claims may result in:

●decreased demand for any products we commercialize;

●injury to our reputation and significant negative media attention;

●regulatory investigations that could require costly recalls or product modifications;

●difficulty in enrolling participants in clinical trials or withdrawal of clinical trial participants;

●significant costs to defend the related litigation;

●substantial monetary awards to trial participants;

Table of Contents

●loss of potential revenue;

●the diversion of management’s attention away from managing our business; and

●the inability to commercialize any product candidates that we may develop, if approved.

Although we maintain product liability insurance coverage, it may not be adequate to cover all liabilities that we may incur and is subject to deductibles and coverage limitations. Insurance coverage is increasingly expensive. We may not be able to maintain insurance coverage at a reasonable cost or in an amount adequate to satisfy any liability that may arise. If we are unable to obtain insurance at acceptable cost or otherwise protect against potential product liability claims, we will be exposed to significant liabilities, which may materially and adversely affect our business and financial position. These liabilities could prevent or interfere with our commercialization efforts.

Any future growth outside of the United States would be subject to additional regulatory burdens and other risks and uncertainties.

Our future growth may depend, in part, on our ability to commercialize our current and future products in markets outside of the United States either on our own or through collaborations with third parties.

We continue to evaluate the opportunities for the development and commercialization of our product candidates in certain markets outside of the United States, including through our Managed Access Program and collaborations with third parties, including Huadong. We and our collaborators are not permitted to market or promote any of our product candidates before we receive regulatory approval from the applicable regulatory authority in that market, and we may never receive such regulatory approval for any of our product candidates. To obtain separate regulatory approval in many other countries, we, or our collaborators, must comply with numerous and varying regulatory requirements of such countries regarding safety and efficacy and governing, among other things, clinical trials, manufacturing and commercial sales, pricing and distribution of our product candidates, and we cannot predict success in these jurisdictions. If we obtain approval, and ultimately commercialize, our product candidates in markets outside of the United States, we would be subject to additional risks and uncertainties, including:

●our ability to obtain reimbursement for our product candidates in such markets;

●our inability to directly control commercial activities because we may rely on third parties;

●the burden of complying with complex and changing regulatory, tax, accounting and legal requirements of such countries;

●exposure to increased regulatory risk, including those arising under the FCPA (as defined below);

●different medical practices and customs in such countries affecting acceptance in the marketplace;

●import or export licensing requirements;

●longer accounts receivable collection times;

●longer lead times for shipping;

●language barriers for technical training and the need for language translations;

●reduced protection of intellectual property rights in certain countries;

●the existence of additional potentially relevant third party intellectual property rights; and

Table of Contents

●foreign currency exchange rate fluctuations.

In some countries, particularly countries in Europe, the pricing of prescription pharmaceuticals is subject to governmental control. In these countries, price negotiations with governmental authorities can take considerable time after the receipt of marketing approval for a drug. To obtain adequate reimbursement or favorable pricing approval in some countries, we may be required to conduct a potentially costly clinical trial that compares our product candidate to other available therapies or in population groups not previously observed. Failure to demonstrate sufficiently desirable results to such parties may result in adverse pricing or reimbursement decisions. If reimbursement of our products is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, our business could be harmed, possibly materially.

We may also be subject to burdensome pricing requirements. See “Risk Factors – Risks Related to Commercialization –Evolving health policy and associated legislative changes related to coverage and reimbursement aimed at lowering healthcare expenditures could impact the commercialization of our product candidates. Pharmaceutical pricing has been, and likely will continue to be, a central component of these efforts.”

We are subject to ongoing obligations, regulatory requirements and continued regulatory review, which may result in significant additional expense. Additionally, our current and future products could be subject to unfavorable regulatory changes and other restrictions and market withdrawal, and we may be subject to penalties if we fail to comply with regulatory requirements or experience unanticipated problems with our products.

We are subject to ongoing regulatory requirements for a number of our activities, including manufacturing, packaging, labeling, storage, distribution, advertising, promotion, sampling, record-keeping, adverse event reporting, conduct of post-marketing trials and submission of safety, efficacy and other post-market information for our products in the United States. Such obligations, along with continued regulatory review, may result in significant additional expense. In addition, approvals may come with potentially burdensome conditions. Furthermore, if we seek and receive approval from regulatory authorities outside of the United States for products or any of our product candidates in the future, we will be subject to such authorities’ requirements, which may be more stringent than our obligations in the United States. See “Business – Government Regulation – BLA Review and Approval” and “Business – Government Regulation – Post-Approval Requirements”

Any regulatory approvals that we receive may be subject to limitations on the approved indicated uses for which the product may be marketed or to the conditions of approval or contain requirements for potentially costly post-marketing testing, including Phase 4 clinical trials, and surveillance to monitor safety and efficacy. If we fail to comply with such requirements; if a regulatory agency discovers previously unknown problems with any of our current or future products, such as adverse events of unanticipated severity or frequency; if problems arise with the facility where a product is manufactured; or if a regulatory agency disagrees with the promotion, marketing or labeling of a product, such regulatory agency may impose restrictions on that product or us, including requiring suspension of sales and withdrawal of the product from the market. If we discover previously unknown problems with a product or product candidate, including adverse events of unanticipated severity or frequency, or with our manufacturing processes; fail to comply with regulatory requirements; or a regulatory agency or enforcement authority disagrees with the promotion, marketing or labeling of our products, such regulatory agency or enforcement authority may, among other things:

●issue warning letters;

●impose civil or criminal penalties;

●suspend or withdraw regulatory approval;

●suspend any of our ongoing clinical trials;

●refuse to approve pending applications or supplements to approved applications submitted by us;

Table of Contents

●impose restrictions on our operations, including closing our CDMOs’ facilities;

●require us to withdraw or correct our marketing materials; or

●seize or detain products or require a product recall.

Any government investigation of alleged violations of law and regulations could require us to expend significant time, cost and resources in response, and could generate negative publicity or reputational harm. Any failure to comply with ongoing regulatory requirements may significantly and adversely affect our ability to commercialize and generate revenue from our products. If regulatory sanctions are applied or if regulatory approval is withdrawn, the value of our company and our operating results will be adversely affected.

If there are changes in the application of legislation or regulatory policies, or if problems are discovered with a product or the manufacture of a product, or if we or one of our distributors, licensees, co-marketers or other third parties operating on our behalf fails to comply with regulatory requirements, regulatory authorities could impose fines on us, impose restrictions on such product or its manufacture or require us to recall or remove such product from the market, in addition to withdrawing our marketing authorizations, or requiring us to conduct additional clinical trials, change our product labeling or submit additional applications for marketing authorization. If any of these events occur, our ability to sell an affected product may be impaired, and we may incur substantial additional expense to comply with such regulatory requirements.

The policies of the FDA and other regulatory authorities may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our product candidates. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative or executive action, either in the United States, Europe or in other jurisdictions. In addition, if we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may be subject to potentially significant enforcement actions.

Our business operations are subject to extensive healthcare regulation and enforcement by various government entities, and our failure to strictly adhere to these regulatory requirements could have a detrimental impact on our business.

The development and marketing of pharmaceutical products and related arrangements with healthcare professionals, third party payors, patients, and other third parties in the healthcare industry are subject to a wide range of healthcare laws and regulations that may constrain the business or financial arrangements and relationships through which we market, sell and distribute our current and future products. See “Business – Government Regulation”.

Given the broad scope and evolving government interpretation and enforcement of these laws, our business activities could be subject to challenge under one or more of such laws. We have entered into consulting and advisory board agreements with physicians and other healthcare professionals and could be adversely affected if regulatory authorities determine our financial relationships with such prescribers violate applicable laws or create a conflict of interest. For example, investigators for our clinical trials may serve as scientific advisors or consultants to us from time to time and receive compensation in connection with such services. Regulatory authorities may conclude that a financial relationship between us and a principal investigator or a clinical trial site has created a conflict of interest or otherwise affected interpretation of a study. Regulatory authorities may therefore question the integrity of the data generated at the applicable clinical trial site and the utility of the clinical trial itself may be jeopardized, which could result in a delay in approval, or rejection, of our marketing applications by regulatory authorities and may ultimately lead to the denial of marketing approval of our product candidates. Furthermore, investigators for our clinical trials may become debarred by regulatory authorities, which may impact the integrity of our studies and the utility of the clinical trial itself may be jeopardized.

Ensuring that our business arrangements with third parties comply with applicable healthcare laws and regulations may involve substantial costs. Any action against us for violation of these laws, even if we successfully defend against it, could cause us to incur significant legal expenses and divert our management’s attention from the

Table of Contents

operation of our business. If our operations, including activities conducted by our sales team, were to be found to be in violation of any of these laws or any other governmental regulations that may apply to us, we may be subject to the imposition of civil, criminal and administrative penalties, damages, disgorgement, monetary fines, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, individual imprisonment, contractual damages, reputational harm, diminished profits and future earnings, additional reporting requirements or oversight if we become subject to a corporate integrity agreement or similar agreement to resolve allegations of non-compliance with these laws, and curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our results of operations. Further, defending against any such actions can be costly, time consuming and may require significant personnel resources. Therefore, even if we are successful in defending against any such actions that may be brought against us, our business may be impaired.

Risks Related to Product Development

If we are unable to advance our product candidates in clinical development and obtain regulatory approval, or experience significant delays in doing so, our business may be significantly harmed.

Our product candidates are in various stages of clinical development. We base our projections about the future development and potential approval of our product candidates on indirect data from other companies and the results of our preclinical and clinical trials, but ultimate success is uncertain and involves significant risk.

We cannot be certain that any of our product candidates will be successful in their clinical trials. We also cannot be certain that they will receive regulatory approval, even after completing a successful pivotal clinical trial. We may also choose to cease development of a product candidate prior to conducting a pivotal trial for any reason, including capital conservation purposes. We may also choose not to commercialize a product candidate that has completed a pivotal trial or received regulatory approval, for a number of reasons, including commercial viability. Such decisions may be for a particular indication or be for the product candidate entirely. In the event that a product candidate is unsuccessful in its clinical trials, fails to receive regulatory approval or is unviable for another reason, our business may be materially harmed by limiting our ability to recoup our development expenses through a successful commercial launch.

Each of our product candidates requires substantial preclinical or clinical development and manufacturing support as part of our product development strategy. The clinical success of our current and future product candidates depends upon several factors, including, but not limited to, the following:

●submission to and authorization to proceed with clinical trials by the FDA under INDs and CTAs to applicable authorities outside of the United States for our product candidates to commence planned clinical trials or future clinical trials;

●successful completion of nonclinical studies, including toxicology studies, pharmacological, and biodistribution studies, as conducted, where applicable, under GLP;

●successful site activation for, enrollment in, and completion of clinical trials, including the ability of our CROs to successfully conduct such trials within our planned budget and timing parameters without adversely impacting our trials, and our ability to successfully oversee CRO activities;

●positive data from our clinical programs, including post-marketing trials and those intended to satisfy regulatory commitments or for label expansion, with sufficient quality to support an acceptable risk-benefit profile of our products and product candidates for the targeted indications in the intended populations to the satisfaction of the applicable regulatory authorities;

●timely receipt, if at all, of approvals from applicable regulatory authorities and maintenance of any such approvals;

Table of Contents

●as applicable, acceptance of pediatric study plans by regulatory authorities, and the follow through of any pediatric study commitments, such as development of pediatric formulations, if required;

●establishment and maintenance of arrangements with third party manufacturers, as applicable, for continued clinical supply and commercial manufacturing;

●successful development of our manufacturing processes and transfer to third party CDMO facilities to support our development and commercialization activities in a manner compliant with all regulatory requirements;

●successful manufacture of sufficient supply of our product candidates within approved specifications for purity, efficacy and cGMP requirements from our facility and from our CDMOs or other sole-source manufacturers in order to meet clinical or commercial demand, as applicable, for ourselves and for our partners;

●continued compliance with any post-marketing requirements imposed by regulatory authorities, including any required post-marketing clinical trial commitments or REMS or similar risk management measures; and

●maintenance of a continued acceptable safety profile of our product candidates before and following approval.

If we do not accomplish one or more of these factors in a timely manner or at all we could experience significant delays in, or an inability to, timely or successfully commercialize our product candidates. Failure to generate sufficient revenue from the commercialization of our current and future products, whether as a result of failing to obtain regulatory approvals or unsuccessfully commercializing such products may harm our ability to continue our operations by limiting our potential commercial prospects. In such an instance, we may need to seek capital elsewhere. See “Risk Factors – General Risk Factors – We have a history of operating losses and may require substantial additional financing in the future.”

Clinical drug development is a lengthy and expensive process with uncertain timelines and outcomes. We may encounter substantial delays in our clinical trials, or we may fail to demonstrate safety and efficacy to the satisfaction of applicable regulatory authorities. We may therefore be unable to obtain required regulatory approvals and be unable to successfully commercialize our product candidates on a timely basis, if at all.

Before obtaining marketing approval from regulatory authorities for the sale of our product candidates, we must conduct extensive clinical trials to demonstrate the safety and efficacy of our product candidates in humans. Clinical testing is expensive, time consuming and uncertain as to the outcome.

Not all of our clinical trials have been conducted as initially planned or completed on our initial projected schedule, and accordingly, we cannot guarantee that any of our current or future clinical trials will be conducted as initially planned or completed on our initial projected schedule, if at all. Further, even if conducted on time, a clinical trial may result in unfavorable or statistically insignificant results, leading us to abandon our pursuit of a particular indication or the development of a product candidate entirely. Clinical trials are a lengthy process that require the expenditure of significant money and human capital. Failing to achieve desired efficacy or identifying of a novel safety hazard in turn represents an inability to successfully recoup such expense via a potential commercialization of the product candidate, if approved. Sufficient inability to recoup clinical trial expenses via successful development could pose material risks to our business. See “Risk Factors – Risks Related to Product Development –If we are unable to advance our product candidates in clinical development and obtain regulatory approval, or experience significant delays in doing so, our business may be significantly harmed.”

Commencing a clinical trial is subject to acceptance by the FDA of an IND or IND amendments, acceptance by competent authorities of the EU member states of a CTA under the CTR or acceptance by other applicable regulatory

Table of Contents

authorities, and finalizing the trial design based on discussions with the FDA, competent authorities of the EU member states or other applicable regulatory authorities. We have and may in the future receive feedback or guidance from regulatory authorities on our clinical trial design and protocols and, even after we incorporate such feedback or guidance from these regulatory authorities, such regulatory authorities may impose other requirements for our clinical trials; disagree that we have satisfied their requirements to commence our clinical trials; disagree with our interpretation of data from the relevant preclinical studies, clinical trials or CMC data; or disagree or change their position on the acceptability of our trial designs, including the proposed dosing level or schedule, treatment duration, our definitions of the patient populations or the clinical endpoints selected. Any of the foregoing may require us to complete additional preclinical studies, clinical trials, CMC development, other studies or impose stricter approval conditions than we currently expect.

Commencing our planned clinical trials is also subject to approval by an institutional review board (an “IRB”), an ethics committee and/or other applicable committees for each clinical trial site before a trial may be initiated, which approval could be delayed, rejected or suspended. IRBs, regulatory authorities or other applicable safety committees may impose a suspension or termination of our clinical trials even after approval and initiation of trial sites due to a number of factors, including failure to conduct the clinical trial in accordance with regulatory requirements or our clinical protocols, inspection of the clinical trial operations or trial site by regulatory authorities, unforeseen safety issues or adverse side effects that arise in the trial, or failure to demonstrate a benefit from using a drug, any of which could result in the imposition of a clinical hold, as well as changes in governmental regulations or administrative actions or lack of adequate funding to continue the clinical trial.

Successful completion of our clinical trials is a prerequisite to submitting a BLA or certain supplemental BLAs (“sBLA”) to the FDA, an MAA to the European Medicines Agency (the “EMA”) or national competent authorities of the EU member states, or other applicable regulatory authorities in other countries for each product candidate and, consequently, is a prerequisite to us obtaining approval and initiating commercial marketing of our current and any future product candidates. A failure of one or more of our current or future clinical trials can occur at any stage of testing, and our clinical trials may not be successful. We have experienced and may continue to experience delays in our ongoing clinical trials, and we do not know whether planned clinical trials will begin on time, be allowed by regulatory authorities, require redesign, have timely site activation and participant enrollment or be completed on schedule, if at all. Events that have and may in the future delay or prevent commencement or successful completion of clinical development of our product candidates as planned and on schedule, if at all, include but are not limited to:

●inability to generate sufficient preclinical, toxicology or other in vivo or in vitro data to support the initiation of human clinical trials;

●delays or failure in reaching a consensus with regulatory agencies on trial design or implementation, including the appropriate dosage levels, frequency of dosing, or treatment period in clinical trials;

●delays or failure in reaching agreement on acceptable terms with prospective CROs, and clinical trial sites, the terms of which can be subject to extensive negotiation and may vary significantly among different CROs and clinical trial sites;

●difficulties in obtaining required IRB, ethics committee approval or positive opinion at each clinical trial site;

●delays or failure in obtaining regulatory approval to commence a trial, or imposition of a clinical hold by regulatory authorities;

●difficulty in identifying and enrolling suitable participants in a particular trial, including due to competition from other companies’ clinical trials for a particular indication, which may reduce the power of a clinical trial to detect statistically significant results;

●amendments to clinical trial protocols impacting study criteria, endpoints or design, including amendments that either we initiate or are requested by regulatory authorities;

Table of Contents

●difficulty collaborating with patient groups and investigators;

●failure by our CROs, medical institutions, or other third parties we contract with in connection with our clinical trials to adhere to clinical trial requirements or to perform their obligations in a timely manner or in compliance with all applicable laws and regulations, including the FCPA;

●failure to perform in accordance with GCPs or applicable comparable regulatory guidelines in other countries;

●participants not completing a clinical trial or not returning for post-treatment follow-up, including as a result of trial demands on participants;

●clinical trial sites withdrawing from or being unable to conduct activities, or participants withdrawing from clinical trials, including as a result of a pandemic or other outbreak of disease and global conflict;

●participants experiencing serious adverse events or undesirable side effects or being exposed to unacceptable health risks;

●participants failing to experience confirmed pre-specified events during the clinical trial within an expected timeframe, if at all;

●safety issues, including occurrence of adverse events associated with a product candidate, that are viewed to outweigh its potential benefits;

●changes in regulatory requirements, policies and guidance that require amending or submitting new clinical protocols;

●the cost of clinical trials being greater than we anticipate;

●strategic decisions regarding clinical study priority for capital preservation purposes;

●failure by us, our CROs, or other third parties with whom we contract to properly collect, analyze, and/or assess clinical data, including the performance of assays, analyses and other activities;

●clinical trials of our product candidates producing negative, inconclusive or uncompetitive results, which may result in us deciding, or regulatory authorities requiring us, to conduct additional clinical trials or modify or cease development programs for our product candidates;

●failure to replicate safety, efficacy or other data from earlier preclinical studies and clinical trials conducted by us or third parties, including the companies from whom we have licensed or acquired or may in the future license or acquire our product candidates, in our later clinical trials;

●the occurrence of adverse or other events not observed in earlier studies;

●suspensions or terminations of our clinical trials by us or the IRBs of the institutions in which our clinical trials are being conducted, the Data Safety Monitoring Board for such trials or the FDA or comparable regulatory authorities;

●failure of manufacturers, or us, to produce sufficient quantities of or phase-appropriate supplies of our product candidates for use in our clinical trials in accordance with applicable cGMP requirements and regulations or applicable comparable regulatory guidelines in other countries;

Table of Contents

●delays in manufacturing, testing, releasing, validating or importing/exporting sufficient stable quantities of our product candidates for use in clinical trials or the inability to do any of the foregoing either as a result of quality assurance or due to our reliance on third party manufacturers; and

●disruptions to our business operations, including our manufacturing operations, and the business operations of our third party manufacturers, CROs upon whom we rely to conduct our clinical trials, or other third parties with whom we conduct business or otherwise engage, as well as disruptions in supply chain distribution in the countries in which we conduct our clinical trials, our manufacturers produce our product candidates or we otherwise conduct business or engage with other third parties, now or in the future.

Delays in the commencement or completion of our planned and ongoing clinical trials have occurred and may continue to occur. Consequences of delays have increased and may in the future increase our costs of developing our product candidates, slow down the development and approval of our product candidates, delay or jeopardize our ability to commence product sales and generate revenue, if any, from our product candidates and harm their commercial prospects. In addition, many of the factors that cause, or lead to, difficulties and delays in the commencement or completion of clinical trials may also ultimately lead to the denial of regulatory approval of our product candidates or us deciding to modify or cease development of our product candidates.

Clinical trial delays could also shorten any periods during which our products have patent protection or shorten any periods during which we have the exclusive right to commercialize our product candidates and may allow our competitors to bring products to market before we do, which could impair our ability to obtain orphan exclusivity for our products that potentially qualify for this designation and to successfully commercialize our product candidates, and may harm our business and results of operations. Any inability to successfully complete preclinical and clinical development could result in additional costs to us or impair our ability to generate revenue and harm our business, financial condition and prospects significantly.

Furthermore, clinical trials must be conducted in accordance with the laws, rules and regulations, guidelines and other requirements of the FDA, EU national competent authorities, the EMA, the UK Medicines and Healthcare products Regulatory Agency (the “MHRA”) and other applicable regulatory authorities outside of those jurisdictions and are subject to oversight by these regulatory authorities and IRBs or ethics committees at the medical institutions where such clinical trials are conducted. Further, conducting global clinical trials, as we do for certain of our product candidates, may require that we coordinate among the legal requirements and guidelines of regulatory authorities across a number of jurisdictions, including the United States, the EU, the United Kingdom and countries outside of those jurisdictions, which could require that we amend clinical trial protocols or determine not to conduct a trial in one or more jurisdictions or to run separate trials in various jurisdictions due to the inability, cost or delay in harmonizing divergent requests from such regulatory authorities, all of which could increase costs. In addition, clinical trials that are conducted in countries outside the United States, the EU and the United Kingdom may subject us to risks associated with the engagement of non-United States, non-EU and non-United Kingdom CROs who are unknown to the FDA, the EMA or the EU national component authorities or the MHRA and may have different standards of diagnosis, screening and medical care. Such trial sites may also incur risks associated with further delays and expenses as a result of increased shipment costs (including as a result of local quality release or in-country testing of a product candidate supply produced in a different jurisdiction for our clinical trials) and political and economic risks relevant to such countries outside the United States, the EU and the United Kingdom.

In addition, the FDA’s and other regulatory authorities’ policies with respect to clinical trials may change and additional government regulations may be enacted. Such changes may require us to dedicate time, resources and capital to comply and, if we are unable to do so effectively or on a timely basis, our development plans may be impacted and our business may suffer material harm.

Table of Contents

We may find it difficult to enroll participants in our clinical trials in a timely manner given the limited number of patients who have the diseases for which our product candidates are being studied, our particular enrollment criteria or competing clinical studies in the same patient population.

The timely completion of clinical trials in accordance with their protocols depends, among other things, on our ability to enroll a sufficient number of patients who remain in the trial until its conclusion, particularly given that many of the conditions for which we are evaluating our current product candidates or may evaluate in the future are in small disease populations. Accordingly, when we encounter difficulties in enrollment, we have experienced and may in the future experience delays, or we may be prevented from completing our clinical trials. Participant enrollment depends on many factors, including:

●the size and nature of the patient population;

●the severity of the disease being studied;

●participant referral practices of prescribers;

●participant eligibility criteria for the clinical trial and evolving standards of care;

●the proximity of participants to clinical sites;

●the complexity of the design and nature of the clinical protocol and trial;

●the fact that our product candidates modulate the immune system and carry unique risks associated with immunosuppression, including the risk of serious infections, potential interference with vaccines and other potential serious health risks;

●the availability and nature of competing clinical trials;

●the availability of standard of care or new drugs approved for the indication the clinical trial is investigating;

●failure to obtain, maintain and/or timely amend participant consents;

●our ability to recruit clinical trial investigators with applicable competencies and experience;

●the risk that participants enrolled in clinical trials will withdraw from the trials before completion of their treatment or follow-up period (in either case including as a result of trial demands on participants among other things);

●clinicians’ and participants’ perceptions as to the safety and potential advantages of the product candidate being studied in relation to other available therapies; and

●the occurrence of adverse events or undesirable side effects attributable to our product candidates.

The process of finding and enrolling participants may prove costly, especially since we are looking to identify a subset of the participants eligible for our studies from a relatively small patient population for many of the diseases we are studying. If participants are unable or unwilling to participate in our clinical trials for any reason, or we experience difficulties in participant enrollment for any other reason, our costs may significantly increase and the timeline for recruiting participants, conducting trials and obtaining regulatory approval of our product candidates may be significantly delayed or prevented, the commercial prospects of our product candidates may be harmed, and our ability to commence product sales and generate product revenue from any of these product candidates, if approved, could be delayed or prevented. Any of these occurrences may harm our business, financial condition, and prospects significantly.

Table of Contents

Our products and product candidates may cause undesirable side effects or have other safety risks that could delay or prevent their regulatory approval, limit the commercial profile of an approved label or result in significant negative consequences, including withdrawal of approval, following any potential marketing approval.

Treatment with our products and product candidates may produce undesirable side effects or adverse reactions or events. Undesirable side effects caused by our product candidates could cause us or regulatory authorities to interrupt, delay or halt clinical trials and could result in more restrictive labels or the delay or denial of regulatory approvals by regulatory authorities.

Our products and product candidates modulate the immune system and carry risks associated with immunosuppression, including the risk of serious infections and other potential serious health risks.

If the results of our clinical trials, including clinical trials evaluating our current products in new indications, or clinical trials conducted by collaboration partners, reveal an unacceptable severity and prevalence of certain side effects, the FDA or applicable regulatory authority outside of the United States may suspend or terminate our clinical trials, or not authorize us to initiate further trials. In addition, if other molecules in the same or related class being developed or commercialized by third parties show the same or similar side effects as those we observed in our trials but to a greater degree or report new previously-unreported side effects, it could have an impact on the entire class of molecules, and the applicable regulatory authority may modify, suspend, or terminate our clinical trials; not authorize further clinical trials; require post-marketing clinical trial commitments or safety monitoring (e.g., REMS); or even suspend commercialization of any products or product candidates, as applicable, that contain a molecule within such class. Further, third parties may have rights to independently develop and commercialize our current and future products and product candidates, which may increase the likelihood of adverse safety results. For example, Regeneron retains worldwide rights to develop and commercialize ARCALYST for local administration to the eye and ear and oncology, and Huadong holds rights to develop and commercialize ARCALYST in the Huadong Territory. The development of our product candidates and, if approved, commercialization of our products for new indications or new patient populations by these third parties may increase the possibility of uncovering adverse safety results not previously discovered during our own clinical development process or United States commercialization. Such effects, if uncovered by such third parties, may lead to regulatory authorities ordering us to cease further development of, deny or withdraw any approval of any of our products or product candidates, or require onerous label changes, for any or all targeted indications.

In addition, the compassionate use of our products and product candidates, or evaluation of our products and product candidates by third parties via scientific collaborations (e.g., our collaborative study agreement exploring ARCALYST as a treatment for cardiac sarcoidosis) or investigator initiated studies could increase the possibility of generating adverse safety results that impact our commercialization of such products or our development of such product candidates. Such adverse safety results, when reported to regulatory authorities, may negatively impact the safety profile of the drug studied as a class effect and could result in the imposition of clinical holds on all clinical trials involving such product candidate regardless of the indication studied.

Further, clinical trials by their nature utilize a sample of the potential patient population. Certain rare and severe side effects associated with our products or product candidates may only be uncovered after use by a significantly larger number of patients, including patients with different demographic characteristics than those that participated in our clinical trials. If we or others later identify undesirable side effects caused by our products or product candidates, if approved, a number of potentially significant negative consequences could result, including but not limited to:

●regulatory authorities may withdraw approvals of such product and require us to take it off the market;

●regulatory authorities may require the addition of labeling statements, specific warnings, contraindications or field alerts to prescribers and pharmacies;

●we may be required to create a registry or a REMS plan or similar risk management measures, which could include a medication guide outlining the risks of such side effects for distribution to patients, a communication plan for healthcare professionals or other elements to assure safe use;

Table of Contents

●we may be required to change the way the product is administered, conduct additional clinical trials or change the labeling of the product;

●we may be subject to limitations on how we promote the product, or sales of the product may decrease significantly;

●we could be sued and held liable for harm caused to patients;

●the product may become less competitive; and

●our reputation may suffer.

Any of these events could prevent us from achieving or maintaining market acceptance of the particular product or product candidate, if approved, and could significantly harm our business, results of operations and prospects.

Interim, preliminary, and “top-line” data from our clinical trials that we announce or publish from time to time may change as more participant data become available following the release of the interim data; preliminary data are subject to audit and verification procedures, and deeper analysis of the data beyond the topline data may provide more color and context to the data, all of which could result in material or other changes that are reflected in the final data.

From time to time, we may disclose interim data from our preclinical studies or clinical trials, which are based on an interim analysis of then-available data from ongoing studies or trials. Interim data from our preclinical studies and clinical trials are subject to the risk that one or more of the clinical observations may materially change as participant enrollment continues and more participant data become available from the particular study or trial. As a result, interim data should be viewed with caution until final data are available. Adverse differences between interim data and final data could significantly harm the development of our product candidates and our business prospects with respect thereto.

Further, from time to time we may announce or publish topline or preliminary data from our preclinical studies or clinical trials, which are based on a preliminary analysis of data from a completed study. Preliminary and topline data from our clinical trials are subject to change following a more comprehensive review of the data from the particular clinical trial. We also make assumptions, estimations, calculations and conclusions as part of our preliminary analyses of the data, and we may not have received, or had the opportunity to evaluate fully and carefully, all of the data. As a result, preliminary and topline data remain subject to audit and verification procedures that may result in the final data being different from the preliminary data we previously announced or published.

Third parties, including regulatory agencies, may not accept or agree with our assumptions, estimates, calculations, conclusions or analyses or may interpret or weigh the importance of data differently, which could impact the value of the particular program, the approvability or commercialization of the particular product candidate and our business prospects. In addition, the information we announce or publish regarding a particular preclinical study or clinical trial may represent only a portion of extensive information generated from that study or trial, and our shareholders or other third parties may not agree with what we determine is material, important or otherwise appropriate information to include in our disclosure.

If the interim, preliminary, or topline data that we report differ materially from final results, or if third parties, including regulatory authorities, disagree with the conclusions reached, our ability to obtain approval for, and commercialize, our product candidates may be harmed, which could harm our business prospects, operating results or financial condition. Further, announcement of preliminary, interim or top-line data by us or differences between that data and the final data could result in volatility in the price of our Class A ordinary shares.

Table of Contents

Risks Related to Marketing Approval and Regulatory Matters

Regulatory approval processes are lengthy, time consuming and inherently unpredictable. If we are not able to obtain, or if there are delays in obtaining, required regulatory approvals for our current or future product candidates or if we fail or otherwise cease to advance their development, we will be delayed in commercializing or will not be able to commercialize, our current or future product candidates and our ability to generate additional revenue will be materially impaired.

Before we can commercialize any of our current or future product candidates, we must obtain marketing approval from regulatory authorities. We may not be able to receive approval to market any of our current or future product candidates from regulatory authorities in our desired indications in any jurisdiction, and it is possible that none of our product candidates or any product candidates we may seek to develop in the future will ever obtain regulatory approval. We may need to rely on third party CROs and regulatory consultants to assist us in this process. Securing regulatory approval requires the submission of extensive preclinical and clinical data and supporting information to the various regulatory authorities for each therapeutic indication to establish a product candidate’s safety and efficacy. Securing regulatory approval also requires the submission of information about the biologic manufacturing process to, and inspection of manufacturing facilities by, the relevant regulatory authorities, who may deny approval based on the results of such submissions and inspections. Our current or future product candidates may not be effective, may be only moderately effective or may prove to have undesirable or unintended side effects, toxicities or other characteristics that may preclude our obtaining marketing approval or prevent or limit commercial use. The FDA and other regulatory authorities have substantial discretion in the approval process, including determining when or whether regulatory approval will be obtained for a product candidate. Even if we believe the data collected from clinical trials are promising, such data may not be sufficient to support approval by the FDA or any other regulatory authority or such authorities may request additional information that may be difficult to generate or provide. Further, following approval, the FDA may conduct additional inspections and, based on the results of such inspections, deem the inspected manufacturing facilities to be deficient, suspending our ability to manufacture our product candidates until we can secure satisfactory alternative manufacturing facilities.

In addition to the United States, we may seek regulatory approval to commercialize our product candidates in other jurisdictions. While the scope of regulatory approval is similar in many countries, to obtain separate regulatory approval in multiple countries will require us to comply with numerous and varying regulatory requirements of each such country or jurisdiction regarding safety and efficacy and governing, among other things, clinical trials, commercial sales, pricing and distribution, and we cannot predict success in any such jurisdictions.

The process of obtaining regulatory approvals, both in the United States and in other countries, is time consuming, expensive, may take many years, if approval is obtained at all, and can vary substantially based upon a variety of factors, including the type, complexity and novelty of the product candidates involved. Changes in legislation, regulation or policy governing the development, approval and marketing of biological products may cause delays in our plans for submitting marketing applications and obtaining approvals for such applications, or we may be unable to obtain marketing approvals. For instance, comprehensive proposals have been made for the complete overhaul of the existing EU pharmaceutical legislation, in the context of the Pharmaceutical Strategy for Europe initiative, launched by the European Commission in November 2020. The European Commission’s proposal for revision of several legislative instruments related to medicinal products (potentially reducing the duration of regulatory data protection, revising eligibility for expedited pathways, etc.) was published in April 2023. The proposed revisions received a positive first reading of the European Parliament and European Council has yet to consider the legislative proposal. It is unlikely that the new law will be adopted through the EU legislative process before 2026. When adopted, the new law may have a significant impact on the biopharmaceutical industry in the long-term.

Regulatory authorities have substantial discretion in the approval process and may refuse to accept any application or may decide that our data are insufficient for approval and require additional preclinical studies or clinical or other trials for our current or future product candidates. Our current and future product candidates could be delayed in receiving, or fail to receive, regulatory approval or we may fail or cease to advance their development for many reasons, including the following:

Table of Contents

●regulatory authorities may disagree with the number, design or implementation of our clinical trials to support further development or approval;

●we may be unable to demonstrate to the satisfaction of regulatory authorities that a product candidate is safe and effective for its proposed indication or that its clinical and other benefits outweigh its safety risks;

●regulatory authorities could require us to collect additional data or conduct additional clinical trials, which could include a requirement to compare our products or product candidates to other therapies for the treatment of the same indication;

●regulatory authorities, following the discovery of adverse safety signals or side effects from approved therapeutics or therapeutics in development in the same or related class as our products or product candidates, could require us to collect additional data or conduct additional clinical trials;

●the results of clinical trials may produce negative, inconclusive or uncompetitive results, which may result in us deciding, or regulatory authorities requiring us, to conduct additional clinical trials or to modify or cease development programs for our product candidates;

●the results of clinical trials may not meet the primary or secondary endpoints of the applicable trial or the level of statistical significance required by regulatory authorities;

●regulatory authorities may disagree with our interpretation of data from preclinical studies or clinical trials;

●the data collected from clinical trials of our product candidates may not be sufficient to support the submission of a BLA, sBLA, MAA or other submission or to obtain regulatory approval in the United States, Europe or elsewhere;

●the number of participants required for clinical trials may be larger than we anticipate, enrollment in these clinical trials may be slower than we anticipate, participants may drop out of these clinical trials at a higher rate than we anticipate or we may fail to recruit suitable participants for a trial;

●our third party contractors may fail to comply with data quality and regulatory requirements or meet their contractual obligations to us in a timely manner, or at all;

●regulatory authorities may believe that we have not sufficiently demonstrated our ability to manufacture our candidates to the requisite level of quality standards, including that such material is sufficiently comparable to material used in previous clinical trials, or they may fail to approve our manufacturing processes or facilities, or the manufacturing processes or facilities of third party manufacturers with which we contract for clinical and commercial supplies;

●regulatory authorities may conclude that on-site inspections and data audits have not sufficiently demonstrated the quality and integrity of the clinical trial conduct and of data submitted to regulatory authorities in support of our new product approvals and marketing applications;

●the supply or quality of our product candidates or other materials necessary to conduct clinical trials of our product candidates may be insufficient or inadequate;

●our product candidates may have undesirable side effects, toxicities or other unexpected characteristics, causing us or our investigators, regulatory authorities or IRBs to reject, suspend or terminate the clinical trials; and

●the policies, regulations and guidelines of regulatory authorities regarding the development, approval and marketing of biologic products may significantly change, including in the United States, as a result of the

Table of Contents

2025 change in presidential administration, which may render our clinical data, biologic manufacturing process and other supporting information insufficient for approval or restrict us from marketing our product candidates in the manner in which we anticipate.

In addition, even if we were to obtain approval for one or more of our current or future product candidates, regulatory authorities may approve such product candidates for fewer indications or more limited patient populations than we request. Furthermore, regulatory authorities or payers may not approve the price we intend to charge, may grant approval contingent on the performance of costly postmarketing clinical trials, may impose certain postmarketing requirements that impose limits on our marketing and distribution activities, or may approve a product candidate with a label that does not include the labeling claims necessary or desirable for the successful commercialization of that product candidate. Any of the foregoing scenarios could materially harm the commercial prospects for our current or future product candidates.

If we experience delays in obtaining approval or if we fail to obtain approval of or to advance our current or future product candidates, the commercial prospects for our product candidates may be harmed and our ability to generate additional revenue will be materially impaired.

Our products, current product candidates and any of our future product candidates regulated as biologics in the United States may face biosimilar competition sooner than anticipated.

In the United States, the BPCIA created an abbreviated approval pathway for biological products that are biosimilar to or interchangeable with an FDA licensed reference biological product. Under the BPCIA, an application for a biosimilar product may not be submitted to the FDA until four years following the date that the reference product was first approved under a BLA by the FDA. In addition, the approval of a biosimilar product may not be made effective by the FDA until 12 years from the date on which the reference product was first licensed. During this 12 year period of exclusivity, another company may still market a competing version of the reference product for the same therapeutic indication if the FDA approves a full BLA for the competing product containing the sponsor’s own preclinical data and data from adequate and well controlled clinical trials to demonstrate the safety, purity and potency of their product. The law is complex and is still being interpreted and implemented by the FDA. As a result, its ultimate impact, implementation and meaning are subject to uncertainty.

For example, although ARCALYST was approved as a biological product under a BLA for the treatment of CAPS in February 2008, and we believe it qualified for the 12 year period of exclusivity against any biosimilars, such 12 year period of exclusivity has lapsed. The FDA approved ARCALYST for the treatment of recurrent pericarditis and reduction in risk of recurrence in adults and children 12 years of age and older in March 2021. However, the 12 year exclusivity period does not attach to the approval of an sBLA, potentially creating the opportunity for biosimilar competition, subject to any Orphan Drug exclusivity under the United States Orphan Drug Act.See “Risk Factors — Risks Related to Marketing Approval and Regulatory Matters — We may seek Orphan Drug designation for our product candidates in the United States, as well as for any of our product candidates in the EU, and we may be unsuccessful, or may be unable to maintain the benefits associated with Orphan Drug designation, including the potential for market exclusivity, for any product candidate for which we obtain Orphan Drug designation.” If we obtain FDA approval for any of our other biological product candidates, we expect any such product candidates to qualify for the 12 year period of exclusivity under the BPCIA. However, there is a risk that this exclusivity could be shortened due to Congressional action or otherwise, or that the FDA will not consider any such approved product candidates to be reference products for competing products, potentially creating the opportunity for biosimilar competition sooner than anticipated.

Even if we obtain marketing authorization of our current or future product candidates in a major pharmaceutical market such as the United States, or the EU, we may not seek or obtain approval or commercialize our current products or product candidates in other markets, which would limit our ability to realize their full market potential.

In order to market any products in a country or territory, we must establish and comply with numerous and varying regulatory requirements of such country or territory regarding safety and efficacy. Regulatory requirements can vary widely from country to country, and clinical trials conducted in one country may not be accepted by regulatory authorities in other countries, and regulatory approval in one country does not mean that regulatory approval will be

Table of Contents

obtained in any other country. Approval procedures vary among countries and can involve additional product testing and validation, additional administrative review periods, and additional preclinical studies or clinical trials, which would be costly and time consuming and could delay or prevent the introduction of our current or future product candidates, or ARCALYST, in those countries. Satisfying these and other regulatory requirements is costly, time consuming, uncertain and subject to unanticipated delays. In addition, our failure to obtain regulatory approval in any country may delay or have negative effects on the process for regulatory approval in other countries.

We may seek Orphan Drug designation for our product candidates in the United States, as well as for any of our product candidates in the EU, and we may be unsuccessful, or may be unable to maintain the benefits associated with Orphan Drug designation, including the potential for market exclusivity, for any product candidate for which we obtain Orphan Drug designation.

We have received Orphan Drug exclusivity and designation in the United States for ARCALYST for the treatment of pericarditis. In addition, we have received Orphan Drug designation in the EU for ARCALYST for the treatment of idiopathic pericarditis. In the future, we may seek Orphan Drug designation for certain of our other product candidates in the United States or the EU. We may be unsuccessful in obtaining such designation for any of our other product candidates or unable to maintain the associated benefits for any of our other current or future product candidates that are granted Orphan Drug designation, if any. Even if we obtain Orphan Drug designation for certain product candidates for a particular orphan indication in the United States or the EU, we may not be the first to obtain marketing approval for such orphan indication due to the uncertainties associated with developing pharmaceutical products. In such case, subject to applicable laws in those jurisdictions, Orphan Drug exclusivity may no longer be available for our product candidates, if approved, unless we can show a significant benefit over the already approved orphan drug. Moreover, in the event our drug is deemed similar to the first approved orphan drug, we may be denied regulatory approval for our drug in such orphan indication for the duration of the Orphan Drug exclusivity period.

Regulatory authorities in some jurisdictions, including the United States and the EU, may designate drugs or biologics intended to treat small patient populations as Orphan Drug products, which are subject to a number of region-specific (e.g., tax credits, user fee exemptions and potential market exclusivity) rules and regulations. See “Business – Government Regulation – Orphan Drug Designation” and “Business – Government Regulation – Regulatory Framework in the European Union – Orphan Medicinal Products” for more information on applicable rules and regulations.

In connection with the FDA’s approval of ARCALYST in the recurrent pericarditis indication, we received seven years of Orphan Drug exclusivity for ARCALYST for the treatment of recurrent pericarditis and reduction in risk of recurrence in adults and pediatric patients 12 years and older. Even if we obtain Orphan Drug exclusivity for any of our product candidates, that exclusivity may not effectively protect those product candidates from competition because different drugs can be approved for the same disease or condition. Even after an Orphan Drug is approved, the FDA can subsequently approve a later application for the same drug for the same disease or condition if the FDA concludes that the later drug is clinically superior in that it is shown to be safer in a substantial portion of the target populations, more effective or makes a major contribution to patient care. In addition, a designated Orphan Drug may not receive Orphan Drug exclusivity if it is approved for a use that is broader than the indication for which it received orphan designation. Moreover, Orphan Drug exclusive marketing rights in the United States may be lost if the FDA later determines that the request for designation was materially defective or if we are unable to manufacture sufficient quantities of the product to meet the needs of patients with the rare disease or condition. Foreign regulatory authorities may also make the same determination. Orphan Drug designation neither shortens the development time or regulatory review time of a drug nor gives the drug any advantage in the regulatory review or approval process.

We may seek Breakthrough Therapy designation or Fast Track designation by the FDA, for one or more of our product candidates, which we may not receive. Such designation may not lead to a faster development or regulatory review or approval process and does not increase the likelihood that our product candidates will receive marketing approval.

We may seek Breakthrough Therapy or Fast Track designation for one or more of our product candidates, which, if granted, offers the potential for a rolling review of a BLA if a number of conditions are met, which would allow data to be submitted and reviewed as they become available rather than waiting for the full data package to

Table of Contents

become available to be submitted. Rolling review is often faster than the FDA’s standard review process. See “Business – Government Regulation – Expedited Review and Approval” for more information on applicable rules and regulations. The FDA has broad discretion whether or not to grant Fast Track and Breakthrough Therapy designations, and even if we believe a particular product candidate is eligible for such designations, we cannot be certain that the FDA would decide to grant them. Even if we obtain such designations for one or more of our product candidates, we may not experience a faster development process, review or approval compared to non-expedited FDA review procedures. In addition, the FDA may withdraw Fast Track or Breakthrough Therapy designations if it believes that such designations are no longer supported. Although product candidates receiving Fast Track and Breakthrough Therapy designation are generally eligible for the FDA’s priority review procedures, receiving such designations does not guarantee that the BLA for such product candidates will receive priority review.

We may seek a PRIME designation from the EMA, a conditional MA or other designations, schemes or tools for one or more of our product candidates, which we may not receive. Such designations may not lead to a faster development or regulatory review or approval process and do not increase the likelihood that our product candidates will receive marketing authorization.

We may seek a PRIME (Priority Medicines) designation from the EMA, a conditional MA or other designations, schemes or tools for one or more of our product candidates, each of which offer incentives similar to a United States Breakthrough Therapy designation. See “Business – Government Regulation – Regulatory Framework in the European Union – PRIME Designation” and “Business – Government Regulation – Regulatory Framework in the European Union – Marketing Authorization” for more information on the applicable rules and regulations.

Even if we believe one of our product candidates is eligible for PRIME, the EMA may disagree and instead determine not to make such designation. The PRIME scheme or other schemes, designations, or tools, even if obtained or used for any of our product candidates may not lead to a faster development, regulatory review or approval process compared to therapies considered for approval under conventional procedures and do not assure ultimate approval. In addition, even if one or more of our product candidates is eligible to the PRIME scheme, the EMA may later decide that such product candidates no longer meet the conditions for qualification or decide that the time period for review or approval will not be shortened.

The regulatory authorities in the EU have broad discretion whether to grant such an accelerated assessment, conditional marketing authorization or marketing authorization under exceptional circumstances, and, even if such assessment or authorization is granted, we may not experience a faster development process, review or authorization compared to conventional procedures. Moreover, the removal or threat of removal of such marketing authorizations may create uncertainty or delay in the clinical development of our product candidates and threaten the commercialization prospects of our products and product candidates, if approved. Such an occurrence could materially impact our business, financial condition and results of operations.

Due to the recent change in presidential administration, we face substantial uncertainty regarding potential regulatory developments in the United States that may adversely affect our business.

We face substantial uncertainty regarding the potential for changes in the regulatory environment in the United States following the change in presidential administration in January 2025. While many of the Trump Administration’s proposed policies appear to be focused on deregulation, the new administration and federal government could adopt legislation, regulation or policies that adversely affect our business, including by making it more difficult to continue to market ARCALYST or by creating a more challenging and costly environment to pursue the development and commercialization of our current or future product candidates. For example, the federal government, including the FDA, may implement legislative, regulatory or policy changes regarding the standards for approving biologic products that we may be unable to satisfy or changes regarding the marketing of approved biologics that may limit or prohibit the advertising and promotion of ARCALYST and, if approved, our current or future product candidates. The impending uncertainty could present new challenges or potential opportunities as we navigate the clinical development and approval process for our product candidates.

Table of Contents

Additionally, because one objective of the current Trump administration appears to be to decrease spending in the federal government, the FDA could face staff reductions, which could impact the FDA’s ability to engage in routine regulatory and oversight activities and result in delays or limitations on our ability to proceed with clinical development programs and obtain regulatory approvals. It is difficult to predict how executive actions that may be taken by the Trump administration may affect the FDA’s ability to exercise its regulatory authority. If such executive actions impose constraints on the FDA’s ability to engage in routine oversight and product review activities in the normal course, our business may be negatively impacted.

Risks Related to Manufacturing and Our Reliance on Third Parties

We contract with third parties for manufacturing our commercial supply of ARCALYST and clinical supply for our product candidates and for certain research and other preclinical development, which is highly regulated and complex, and expect that we will continue to do so in the future. This reliance on third parties increases the risk that we may not have sufficient quantities of ARCALYST or our product candidates or such quantities at an acceptable cost, which could delay, prevent or impair our research and development or commercialization efforts.

We do not currently own or operate any late-stage or commercial manufacturing facilities. Although we have built a development and manufacturing facility to produce drug substance to support certain research, preclinical and other clinical development for our product candidates, we rely, and expect to continue to rely, on third parties for the manufacture of our late-stage product candidates and certain early-stage product candidates for the majority of our clinical development efforts; the commercial manufacture of our current and future products; and labeling and packaging activities for our current and future products. We rely on these third parties to produce, package and ship our products and product candidates at sufficient quality and quantity to support our and our collaboration partners’ commercialization and research and development efforts.

The manufacture of our current and future products and product candidates is highly regulated, complex and difficult, requiring a multi-step and controlled process, and even minor problems or deviations could result in ARCALYST or our product candidates failing to meet approved specifications, failed batches or other failures, such as defective products or manufacturing failures. Due to the highly technical requirements of manufacturing our current and future products and product candidates and the strict quality and control specifications, we and our third party providers may be unable to manufacture or supply ARCALYST or our product candidates despite our and their efforts. Failure to produce sufficient quantities of our products and product candidates could delay their development, result in supply shortages for our patients, result in lost revenue, if any, and diminish our potential profitability, as applicable, which may lead to lawsuits or could delay the introduction of our product candidates to the market.

Our reliance increases the risk that we will have insufficient quantities of ARCALYST and our product candidates or that ARCALYST and our product candidates are not produced at an acceptable cost or quality, or not in a timely manner due to, for example, deviations in operations or manufacturing facility control, or production interruptions caused by equipment failure and an inability to source adequate replacement parts and equipment, which could delay, prevent or impair our commercialization or research and development efforts. From time to time, we have identified events in the ARCALYST manufacturing process that prevented distribution of ARCALYST material as planned, though this has yet to materially impact our ability to source sufficient ARCALYST material to cover our needs. If, in the future, we are unable to source sufficient finished material, we may stock out or otherwise be unable to meet patient demand for ARCALYST, adversely affecting our business, results of operations and financial condition. In addition, equipment used in the ARCALYST manufacturing process may no longer be supported by vendors in the event of equipment failure. Such equipment may also not be repaired, replaced or qualified in a timely manner. Further, reagents used for the analytical testing of ARCALYST have and may in the future become outdated, requiring qualification before new reagents may be used. These issues may be exacerbated by increased clinical or commercial demand by us or our collaboration partners, or if we decide to develop ARCALYST in one or more additional indications or in additional territories.

We may be unable to adequately address current and future issues with the ARCALYST manufacturing process, which could prevent additional finished material from being distributed in a timely manner or within specifications. If we are unable to source additional commercial supply of ARCALYST, if needed, we may be unable to

Table of Contents

adequately meet patient demand for ARCALYST or may be required to effect a recall, any of which would adversely affect our business, results of operations and financial condition.

Regeneron is the sole manufacturer of ARCALYST drug substance and will remain so until we complete the technology transfer of the manufacturing process for ARCALYST drug substance to Samsung. Regeneron is not obligated to accept our forecasts or purchase orders that are not in line with accepted forecasts and Regeneron may not have sufficient manufacturing capacity to meet our commercial or clinical demand for ARCALYST (including increased demand arising from our need to replace material lost to manufacturing issues). Regeneron, in turn, relies upon CDMOs or other third parties to conduct fill/finish operations for ARCALYST. In the event that a particular batch of ARCALYST fails to meet specifications, whatever the cause, we are nonetheless obligated to pay for such material pursuant to the terms of the Supply Agreement. Further, we rely on a third party CDMO to package and label ARCALYST. Our reliance on Regeneron (including its respective CDMOs) and our other CDMO as our sole manufacturers and/or service providers means that we do not have control over ARCALYST manufacturing operations and scheduling, which may impact our ability to meet commercial or clinical demand for ARCALYST. We may also be subject to unexpected costs arising from any manufacturing or supply chain disruptions, which may materially impact our business, results of operations and financial condition. Many of these risks may still be present after successful completion of the technology transfer of ARCALYST drug substance manufacturing and there is no guarantee that such technology transfer will materially diminish our ARCALYST manufacturing risk profile.

We have qualified or engaged, as applicable, CDMOs to produce our clinical product candidates. While we have manufacturing capabilities to support early development for our product candidates, we and our CDMOs may not be able to produce sufficient quantities of our product candidates or produce them at an acceptable quality, including as a result of global supply chain issues, which could delay, prevent or impair our development or commercialization efforts and increase costs.

We are party to a collaboration agreement with Huadong for ARCALYST. Until such time as Huadong is able to manufacture ARCALYST, either on its own or through a third party CDMO, we are its only source of drug supply. If our current supplier of drug substance and drug product for ARCALYST cannot produce sufficient quantities to satisfy our needs and Huadong’s needs, then this may have an adverse impact on our and Huadong’s business and operations.

If we make manufacturing or formulation changes to our products or product candidates or change manufacturers or manufacturing processes, we may be unsuccessful in producing products or product candidates comparable to existing commercial supply or those used in prior clinical trials. Therefore, we may need to conduct additional process development or additional clinical trials to bridge our prior clinical results to those resulting from the new manufacturing process or new manufacturers, which could impact the timing and subsequent success of our planned commercial supply or clinical trials. In addition, as we plan to produce clinical trial and commercial material at a CDMO, the CDMO may be required to adopt different manufacturing protocols or processes. For example, in March 2023, Regeneron formally initiated a technology transfer with respect to the manufacturing process for ARCALYST drug substance. Our replacement CDMO, Samsung, will utilize a modified manufacturing process from that used by Regeneron, which could require lengthy development, regulatory review and approval. For more information see “Risk Factors — Risks Related to Manufacturing and Our Reliance on Third Parties — We are conducting a technology transfer with respect to the manufacturing process of ARCALYST drug substance from Regeneron to Samsung and the analytical testing methods of ARCALYST drug substance and drug product to new CTLs. Such technology transfer will be subject to significant risks and uncertainties.”

The facilities used by our CDMOs to manufacture, label and package ARCALYST and our current and future product candidates may be inspected by regulatory authorities in connection with the submission of our MAs to, and review by, regulatory authorities or based on their work for other clinical trial sponsors. While we provide oversight of such activities, we do not and will not control the manufacturing process of, and will be completely dependent on, our CDMOs for compliance with cGMPs and other regulatory requirements in connection with the manufacturing, labeling, and packaging of current and future products and product candidates. If our CDMOs cannot successfully perform such functions in conformity with our specifications and the strict regulatory requirements of regulatory authorities, they will not be able to secure or maintain regulatory approval for their facilities. While we review the compliance history and performance of our CDMOs and have the ability to audit their compliance and performance, we have no direct control

Table of Contents

over the ability of our CDMOs to maintain adequate quality control, quality assurance and qualified personnel other than through quality monitoring in accordance with our agreements with the CDMOs. If regulatory authorities do not approve these facilities for the manufacturing, labeling and packaging of our product candidates or if they withdraw any such approval in the future, we may need to find alternative facilities or CDMOs, which would significantly impact our ability to develop, obtain regulatory approval for or market ARCALYST or our current or future product candidates, if approved. Further, our failure, or the failure of our third party CDMOs, to comply with applicable regulations could result in sanctions being imposed on us, including clinical holds, fines, injunctions, civil penalties, delays, suspension or withdrawal of approvals, license revocation, seizures or recalls of products or product candidates, if approved, operating restrictions and criminal prosecutions, any of which could significantly and adversely affect our business and supplies of our products or product candidates.

Many additional factors could cause production interruptions at our facilities or at the facilities of our third party providers, as well as disruptions in travel, shipping or delivery capabilities into and within the countries in which we or our manufacturers produce ARCALYST or our product candidates or disruptions to production capabilities, including due to the impact of natural disasters, accidents, boycotts, labor disputes, political and economic instability, such as acts of terrorism or war and an epidemic, pandemic or other outbreak of disease. The occurrence of any such event could adversely affect our ability to satisfy the required supply for any of ARCALYST or our product candidates or successfully complete preclinical and clinical development, which would result in additional costs to us or impair our ability to generate revenue and would harm our business, financial condition and prospects significantly.

Supply chain issues related to important ancillary products may also adversely affect our business. For example, we contract with a select network of specialty pharmacies who distribute ARCALYST as well as peripheral supplies that are required to reconstitute and self-administer ARCALYST, such as sterile water for injection, syringes and needles. A delay or shortage in the supply or the distribution of the peripheral supplies required to administer ARCALYST may impact patient access to ARCALYST and could cause us to lose potential revenue, reduce our potential profitability, and damage our reputation.

We also contract with third parties to source specialized placebo for use in our clinical trials which cannot be easily replaced as it must be nearly indistinguishable from our product candidates to ensure proper clinical trial blinding. If we encounter shortages of such placebo, our clinical trials may be substantially delayed unless and until we can source suitable replacements.

Our products and product candidates may also compete with other product candidates and approved products for access to and capacity within manufacturing, packaging, and labeling facilities. There are a limited number of CDMOs that operate under cGMP regulations and that might be capable of performing such functions for us. Furthermore, given the limited capacity at such CDMOs and the long lead times needed to reserve capacity, CDMOs may require monetary commitments in connection with such reservations as well as fees for changes or cancellations or additional fees to accommodate expediting of manufacturing, packaging, and labeling . For our product candidates, we may wait to reserve capacity until we can be informed by data from the clinical trials of our product candidates, which may take several months. Any significant delay in the supply of clinical materials for our product candidates could considerably delay conducting our clinical trials and potential regulatory approval of our product candidates. Alternatively, we may project when we may need additional clinical material for our product candidates and reserve capacity “at-risk” prior to our product candidates having generated data from their then current clinical trials.

In addition, given the lead times we must provide to Regeneron or Samsung, following the technology transfer of ARCALYST drug substance manufacturing, with respect to the commercial supply of ARCALYST, we must place purchase orders based on projected demand. Such projections involve risks and uncertainties. For example, we may be unable to swiftly accommodate for unforeseen increases in commercial demand for ARCALYST given the lead times we must provide to Regeneron and limitations on Regeneron’s manufacturing capacity for ARCALYST. We may also be required to estimate and order safety stock as part of our planned technology transfer of the manufacturing process for ARCALYST drug substance, which will be subject to a number of the same risks and uncertainties. These risks may result in additional costs or delays in manufacturing clinical materials for our product candidates when and if we actually need them and commercial materials for ARCALYST and may result in having too little or too much of our product candidates or ARCALYST in inventory to meet actual demand.

Table of Contents

Any performance failure on the part of our existing or future CDMOs could delay, as applicable, clinical development or marketing approval or commercialization efforts for our current and future products. If our current CDMOs cannot perform as agreed, we may be required to replace them. Although we believe that there are several potential alternative CDMOs who could provide the services we currently contract for, we may incur added costs and delays in identifying and qualifying any such replacement. In addition, we may not be able to establish new agreements on acceptable terms, if at all, with such alternative manufacturers. Further, establishing replacement CDMOs for ARCALYST or our product candidates, if required, is unlikely to be accomplished in a timely or cost-effective manner, if at all. Furthermore, despite our efforts, we may be unable to procure a replacement contractor or do so on commercially reasonable terms, which could have a material adverse impact upon our business, results of operations and financial condition. If we or our CDMOs are able to find a replacement contractor, such replacement contractor would need to be qualified and may require additional regulatory approval, which could result in further delay.

We are conducting a technology transfer with respect to the manufacturing process of ARCALYST drug substance from Regeneron to Samsung and the analytical testing methods of ARCALYST drug substance and drug product to new CTLs. Such technology transfer will be subject to significant risks and uncertainties.

In March 2023, Regeneron, our sole supplier of ARCALYST drug substance, initiated a technology transfer related to the manufacturing process of ARCALYST drug substance and the analytical testing methods of ARCALYST drug substance and drug product. Since then, we have worked to qualify Samsung who will serve as the new manufacturer of ARCALYST drug substance and new CTLs who will serve as the new testing labs of ARCALYST drug substance and drug product. We have also contracted with Samsung to document the technology transfer and enable the commercial manufacturing of ARCALYST drug substance should the technology transfer succeed.

Pharmaceutical development, manufacture and analytical testing requires significant expertise and capital investment, and the manufacture and testing of biologics, in particular, can be complex and difficult. While we have selected Samsung as our replacement CDMO and have selected replacement CTLs, we are still in the early stages of the technology transfer process and still must determine whether Samsung and such CTLs can meet our requirements regarding production costs and yields, process controls, quality control, quality assurance, data integrity and cGMP compliance, among other factors. We would also need to source sufficient raw materials to facilitate new manufacturing and analytical testing, which may be affected by supply chain disruptions, materials shortages or an inability to negotiate satisfactory terms with suppliers. The technology transfer process is a time-consuming and difficult task that may require significant time and focus from our management and technical teams. Further, because of the complexities of this process, the technology transfer may be subject to substantial delay, which could materially harm our business and operations.

Because Samsung will be manufacturing ARCALYST drug substance at a new manufacturing site and with a potentially different manufacturing process, and such CTLs will be testing ARCALYST drug substance and drug product at new testing sites and potentially with different testing methods, we expect that the FDA will need to approve such changes before we are able to complete the technology transfer. The FDA generally requires that any replacement CDMO be able to manufacture drug substance at sufficient levels of comparability with the materials produced by the original manufacturer. We are still in the process of confirming comparability between the drug substance produced by Samsung and the drug substance produced by Regeneron. Failure to provide sufficient evidence of comparability may result in the FDA requesting a bioequivalence or pharmacokinetic study, which would delay our expected technology transfer timeline. Even if such study were to be performed, there is no guarantee that the FDA would accept our findings and approve any new facilities for the manufacture of ARCALYST drug substance.

In addition, because the Samsung manufacturing facility is located in South Korea, unlike Regeneron’s United States-based manufacturing facility, we may face new risks arising from tariffs, import/export restrictions, customs proceedings, product being lost or damaged during international shipping, differing regulations, supply chain interruptions and other risks inherent to international operations. These risks, should they occur, could increase our costs and affect our ability to meet clinical and commercial demand for ARCALYST, which could materially impact our business, financial condition and results of operations.

Table of Contents

Regeneron is contractually obligated to continue manufacturing ARCALYST drug substance for at least a portion of the time that it will take us to qualify Samsung as a replacement CDMO. During such time, Regeneron will remain subject to many of the risks described elsewhere in this “Risk Factors” section, including the risk that it is unable to manufacture sufficient quantities of ARCALYST and at sufficient quality to meet ours and our patients’ and collaborators’ needs. Further, because we expect the timeline for any successful technology transfer to extend beyond Regeneron’s contractual obligations, our ability to meet patient demand will depend significantly on whether we can secure sufficient safety stock from Regeneron, negotiate continued ARCALYST drug substance manufacture by Regeneron beyond its contractual obligations or some combination thereof. Purchasing significant amounts of safety stock would require substantial upfront capital investment and, if the technology transfer process is delayed beyond our expectation, such safety stock may expire or be depleted before Samsung can begin manufacturing ARCALYST drug substance. Regeneron may also disagree with our forecasted safety stock requirements and manufacture less ARCALYST drug substance than we request, exposing us to risks if the technology transfer process is significantly delayed. Any arrangement that we negotiate with Regeneron to manufacture ARCALYST beyond their contractual obligations may not be on as favorable terms as our current relationship, which could materially increase our costs and as a result negatively impact our financial condition and results of operations. A failure to secure sufficient safety stock or negotiate satisfactory manufacturing terms with Regeneron could result in supply shortages for our patients and collaborators while we work to complete the technology transfer.

A failure to either complete our planned technology transfer on our expected timeline or at an acceptable cost and/or secure sufficient supply of ARCALYST through the technology transfer process would have a material impact on our business, financial condition and results of operations.

The third parties upon whom we rely for the supply of our products and product candidates are our sole source of supply, and the loss of any of these suppliers could significantly harm our business or the business of our partners.

The drug substance and drug product used in ARCALYST and KPL-387 are supplied to us from single-source suppliers and we obtain the drug substance and drug product used in abiprubart from a limited number of sources. For KPL-1161, we plan to manufacture drug substance in our in-house manufacturing facility and use a single supplier to manufacture drug product. While our in-house manufacturing capabilities have the limited capabilities to produce pre-clinical and early-stage clinical drug supply, we lack internal large-scale manufacturing capabilities necessary to support commercial requirements. Regeneron is currently our sole source manufacturer of ARCALYST drug substance and will remain so until we qualify Samsung as a replacement CDMO. We expect that Samsung will be our sole source manufacturer of ARCALYST drug substance following such qualification. For more information see “Risk Factors — Risks Related to Manufacturing and Our Reliance on Third Parties — We are conducting a technology transfer with respect to the manufacturing process of ARCALYST drug substance from Regeneron to Samsung and the analytical testing methods of ARCALYST drug substance and drug product to new CTLs. Such technology transfer will be subject to significant risks and uncertainties.” Further, we have historically outsourced all ARCALYST packaging and labeling activities to a single CDMO and expect to do so for any future approved products. Our ability to continue to commercialize ARCALYST, to develop our product candidates, and to ultimately supply our commercial products in quantities sufficient to meet market demand, depends in part on our ability to obtain the drug substance and drug product for ARCALYST and these product candidates and package and label such drugs, as applicable, in each case in accordance with regulatory requirements and in sufficient quantities for commercialization and clinical testing. Successful completion of a technology transfer of the manufacturing process for ARCALYST drug substance will be integral to our ability to meet such requirements. With respect to ARCALYST, we do not currently have arrangements in place for a redundant or second-source manufacturer of drug substance or drug product, or a redundant or second-source packager and labeler, in the event any of our current vendors cease or have a substantial delay in their operations or stop offering us sufficient quantities of these materials for any reason, as applicable. With respect to abiprubart, KPL-387 and KPL-1161, while we anticipate having more than one source for drug substance now or in the future, as applicable, such sources are nonetheless limited and subject to similar risks as our other products and product candidates.

We are not certain that our suppliers will be able to meet our demand for our products and product candidates, because of the nature of our agreements with those suppliers, our limited experience with those suppliers or our relative importance as a customer to those suppliers given their manufacturing capacity constraints. It may be difficult for us to assess their ability to timely meet our demand in the future based on past performance. While our suppliers have

Table of Contents

generally met our demand on a timely basis in the past, they may subordinate our needs in the future to their other customers.

In addition to manufacturing our products and product candidates in the quantities that we believe would be required to meet anticipated market demand, our third party manufacturers may need to increase manufacturing capacity and, in some cases, alternative sources of commercial supply may need to be secured, which could involve significant challenges and may require additional regulatory approvals. In addition, the development of commercial-scale manufacturing capabilities may require us and our third party manufacturers to invest substantial additional funds and hire and retain the technical personnel who have the necessary manufacturing experience. Neither we nor our third party manufacturers may successfully complete any required increase to existing manufacturing capacity in a timely manner, or at all.

Moreover, our ability to progress our preclinical and clinical programs or successfully commercialize our products could be materially and adversely impacted if any of the third party suppliers upon which we rely for raw materials and preclinical and clinical stage product candidate and commercial stage product supply were to experience a significant business challenge, disruption or failure due to issues such as financial difficulties or bankruptcy, issues relating to other customers such as regulatory or quality compliance issues, or other financial, legal, regulatory or reputational issues. Additionally, any damage to or destruction of our manufacturing facilities or equipment or those of our third party manufacturers’ or suppliers’ facilities or equipment may significantly impair our ability to manufacture our products and product candidates on a timely basis.

In addition to the above, we have entered into, and may, in the future, enter into collaboration and other agreements requiring us to provide commercial or clinical drug supply to third party partners. A failure by our CDMOs to supply sufficient quantities of drug supply may cause us to breach our contractual obligations, triggering potential penalties under our agreements, including termination of such agreements, if we fail to adequately cure such breach.

Establishing additional or replacement suppliers for the drug substance and drug product used in ARCALYST or our product candidates, if required, is unlikely to be accomplished quickly and can take several years, if at all. Furthermore, despite our efforts, we may be unable to procure a replacement supplier or do so on commercially reasonable terms, which could have a material adverse impact upon our business. If we or our CDMOs are able to find a replacement supplier, such replacement supplier would need to be qualified and may require additional regulatory approval, which could result in further delay. While we and our CDMOs may seek to maintain adequate inventory of the drug substance and drug product used in ARCALYST or our product candidates, any interruption or delay in the supply of components or materials, or our inability to obtain such drug substance and drug product from alternate sources of comparable quality at acceptable prices in a timely manner could impede, delay, limit or prevent our development or commercialization efforts, which could harm our business, results of operations, financial condition and prospects.

Certain of the materials required in the manufacture and the formulation of our products and product candidates are derived from biological sources. Such materials are difficult to procure and may be subject to contamination or recall. Access to and supply of sufficient quantities of raw materials which meet the technical specifications for the production process is challenging, and often limited to single-source suppliers. Finding an alternative supplier could take a significant amount of time and involve significant expense due to the nature of the products and the need to obtain regulatory approvals. If we or our manufacturers are unable to purchase the materials necessary for the manufacture of ARCALYST or our product candidates on acceptable terms, in a timely manner, at sufficient quality levels, or in adequate quantities, if at all, our ability to produce sufficient quantities of such drugs for clinical or commercial requirements would be negatively impacted. A material shortage, contamination, recall or restriction on the use of certain biologically derived substances or any other material used in the manufacture of our products and product candidates could adversely impact or disrupt manufacturing, which would increase costs and impair our ability to generate revenue from the sale of ARCALYST or our product candidates, if approved.

Table of Contents

Our business involves the use of hazardous materials, and we and our third party manufacturers and suppliers must comply with environmental laws and regulations, which can be expensive and restrict how we do business.

Our research and development activities and our third party manufacturers’ and suppliers’ activities involve the controlled storage, use and disposal of hazardous materials owned by us, including the components of ARCALYST or our product candidates and other hazardous compounds. We and our manufacturers and suppliers are subject to laws and regulations governing the use, manufacture, storage, handling and disposal of these hazardous materials. In some cases, these hazardous materials and various wastes resulting from their use are stored at our and our manufacturers’ and suppliers’ facilities pending their use and disposal. We cannot eliminate the risk of contamination, which could cause an interruption of our commercialization efforts, research and development efforts and business operations, environmental damage resulting in costly cleanup and liabilities under applicable laws and regulations governing the use, storage, handling and disposal of these materials and specified waste products. Although we believe that our safety procedures and the safety procedures utilized by our third party manufacturers and suppliers for handling and disposing of these materials generally comply with the standards prescribed by these laws and regulations, we cannot guarantee that this is the case or eliminate the risk of accidental contamination or injury from these materials. In such an event, we may be held liable for any resulting damages and such liability could exceed our resources, and state or federal or other applicable authorities may curtail our use of certain materials or interrupt our business operations. Furthermore, environmental laws and regulations are complex, change frequently and have tended to become more stringent. We cannot predict the impact of such changes and cannot be certain of our future compliance. We do not currently carry biological or hazardous waste insurance coverage.

We rely, and expect to continue to rely, on third parties, including independent investigators and CROs, to activate sites, conduct and otherwise support our research activities, preclinical studies, clinical trials and other trials for our product candidates. If these third parties do not successfully carry out their contractual duties, comply with regulatory requirements or meet expected deadlines, we may not be able to obtain regulatory approval for or commercialize our product candidates, and our business could be substantially harmed.

We rely on medical institutions, clinical investigators, contract laboratories and other third parties, such as CROs, to activate sites, conduct or otherwise support our preclinical studies and clinical trials for our product candidates properly and on time. We also rely on third parties to conduct other research related to our product candidates. We expect to rely heavily on these parties for such site activation, execution of and otherwise supporting clinical trials for our product candidates. While we have agreements governing their activities and we review the compliance history and performance of our CROs as well as have the ability to audit such activities, we have no direct control over their activities and have limited influence over their actual performance other than through quality monitoring in accordance with our agreements with the CROs. The third parties with whom we contract for execution of our preclinical studies and our clinical trials play a significant role in the conduct of these studies and trials and the subsequent collection and analysis of data. Except for restrictions imposed by our contracts with such third parties, we have limited ability to control the amount or timing of resources that they devote to our programs. Although we rely on these third parties to conduct our preclinical studies and clinical trials in accordance with applicable GLP or GCP requirements, we remain responsible for ensuring that each of our clinical trials is conducted in accordance with the applicable protocol, legal and regulatory requirements and scientific standards, and our reliance on these third parties does not and will not relieve us of our regulatory responsibilities. For any violations of laws and regulations during the conduct of our preclinical studies or clinical trials, we could be subject to warning letters or enforcement actions that may include civil penalties and criminal prosecution.

We and our CROs are required to comply with regulations, including GCPs, for conducting, monitoring, recording and reporting the results of clinical trials to ensure that the data and results are scientifically credible and accurate, and that the trial participants are adequately informed of the potential risks of participating in clinical trials and their rights are protected. If we or our CROs fail to comply with applicable GCPs, the clinical data generated in our clinical trials may be deemed unreliable, and regulatory authorities may require us to perform additional clinical trials before approving our marketing applications. In addition, our clinical trials must be conducted with product candidates produced under cGMPs or similar foreign regulations. Our failure or the failure of our CROs to comply with these regulations may require us to repeat clinical trials, which would delay the regulatory approval process and could also subject us to enforcement action. We also are required to register certain clinical trials and post the results of completed

Table of Contents

clinical trials on a government-sponsored database within certain timeframes. Failure to do so when required can result in fines, adverse publicity and civil and criminal sanctions.

Although we have and intend to continue to design the clinical trials for our product candidates, CROs will activate sites and conduct and oversee all of the clinical trials together with the various clinical trial sites that we engage to conduct the studies. As a result, many important aspects of our development programs for our product candidates, including their conduct and timing, will be outside of our direct control. Our reliance on third parties to activate sites and conduct future clinical trials will also result in less direct control over the management of data developed through clinical trials than would be the case if we were relying entirely upon our own staff. Communicating with outside parties can also be challenging, potentially leading to mistakes as well as difficulties in coordinating activities. Outside parties may:

●have staffing difficulties;

●have disruptions to their business and operations, including as a result of the impact from a pandemic or other outbreak of disease or as the result of war, conflict or terrorism;

●fail to comply with contractual obligations;

●have difficulty controlling the performance of their subcontractors;

●experience regulatory compliance issues;

●undergo changes in priorities or become financially distressed; or

●form relationships with other entities, some of which may be our competitors.

These factors may materially adversely affect the willingness or ability of third parties to activate sites and conduct and oversee our clinical trials and may subject us to unexpected cost increases that are beyond our control. If the CROs, their subcontractors or the clinical trial sites do not perform clinical trials in a satisfactory manner, breach their obligations to us or fail to comply with regulatory requirements, the development, regulatory approval and commercialization of our product candidates may be delayed or unsuccessful. In addition, if we are unable to rely on clinical data collected by our CROs, their subcontractors or the clinical trial sites, we could be required to repeat, extend the duration of or increase the size of any clinical trials we conduct, and this could significantly delay commercialization and require significantly greater expenditures.

Further, if our CROs, their subcontractors or the clinical trial sites fail to devote sufficient resources to the development of our product candidates, or if their performance is substandard, it may delay or compromise the prospects for approval and commercialization of our product candidates. In addition, the use of third party service providers requires us to disclose our proprietary information to these parties, which could increase the risk that this information is misappropriated.

If the third parties conducting our preclinical studies or our clinical trials do not perform their contractual duties or obligations, experience significant business challenges, disruptions or failures, do not meet expected deadlines, terminate their agreements with us or need to be replaced, or if the quality or accuracy of the data they obtain is compromised due to their failure to adhere to our protocols or to GCPs, or for any other reason, we may need to enter into new arrangements with alternative third parties. This could be difficult, costly or impossible, and our preclinical studies or clinical trials may need to be extended, delayed, terminated or repeated. As a result, we may not be able to obtain regulatory approval in a timely fashion, or at all, for the applicable product candidate, our financial results and the commercial prospects for our product candidates would be harmed, our costs could increase, and our ability to generate revenues could be delayed.

Table of Contents

Risks Related to Competition, Executing our Strategy and Managing Growth

We face substantial competition, which may result in others discovering, developing or commercializing drugs before or more successfully than we do.

The development and commercialization of new drugs and biologics is highly competitive. ARCALYST currently faces competition in its CAPS and DIRA indications and is facing potential future competition in its recurrent pericarditis indication. KPL-387 is being developed for recurrent pericarditis and we believe, if commercialized, would likely face additional competition from drugs that may offer either more convenient dosing methods or frequencies than what is currently available. We have not yet announced an indication for KPL-1161, but expect that it will compete with a number of drugs that inhibit IL-1 or other mechanisms. Competition may come from major pharmaceutical companies, specialty pharmaceutical companies and biotechnology companies worldwide, each of whom may market and sell drugs or biologics or pursue the development of therapies in the fields in which we are interested. Some of these competitive products and therapies are based on scientific approaches that are the same as or similar to our approach, and others are based on entirely different approaches. Potential competitors also include academic institutions, government agencies and other public and private research organizations that conduct research, seek patent protection and establish collaborative arrangements for research, development, manufacturing and commercialization. See “Business – Competition” for a list of our principal competition.

Many of the companies against which we are competing or against which we may compete in the future have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, conducting clinical trials, obtaining regulatory approvals and marketing approved products than we do. Mergers and acquisitions in the pharmaceutical and biotechnology industries may result in even more resources being concentrated among a smaller number of our competitors. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies. These competitors also compete with us in recruiting and retaining qualified scientific and management personnel and establishing clinical trial sites and participant registration for clinical trials, as well as in acquiring technologies complementary to, or necessary for, our programs.

Our commercial opportunity could be reduced or eliminated if our competitors develop and commercialize products that are safer, more effective, have fewer or less severe side effects, are more convenient or are less expensive than any drugs that we may develop. Further, a competitor conducting a clinical trial in a rare disease indication for which we market a product may reduce the number of patients on our commercial therapy by recruiting such patients to be trial participants. Our competitors also may obtain FDA or other regulatory approval and/or marketing exclusivity for their products more rapidly than we may obtain for ours, which could result in our competitors establishing a strong market position before we are able to enter the market. Further, our clinical trials may need to compete for participants and trial sites against other drugs in clinical development for the same indication. We believe the key competitive factors affecting the success of ARCALYST and any product candidates that we successfully develop and commercialize, are their efficacy, safety, convenience, price, the effectiveness of companion diagnostics in guiding the use of related products, market acceptance by prescribers and patients, the level of biosimilar competition and the availability of reimbursement from government and other third party payors.

We may not be successful in executing our growth strategy to identify, discover, develop, in-license or acquire additional product candidates or technologies, and our growth strategy may not deliver the anticipated resultsor we may refine or otherwise alter our growth strategy. We may seek to acquire businesses or undertake business combinations, collaborations or other strategic transactionswhich may not be successful or on favorable terms, if at all, and we may not realize the intended benefits of such transactions.

We have acquired or in-licensed certain of our existing product candidates, and as part of our strategy we plan to identify new product candidates or technologies that we believe are complementary to our existing portfolio. We may do this through our internal discovery program, or by acquiring the rights to product candidates and technologies through a variety of transaction types, including in-licensing, strategic transactions, mergers or acquisitions. If we are unable to identify, discover, develop, in-license or otherwise acquire and integrate product candidates, or their related companies, in accordance with this strategy, our ability to pursue this component of our growth strategy would be limited and we

Table of Contents

may need to refine or otherwise alter this strategy. We cannot be certain that we will be successful in such efforts, and even if we are successful in such efforts, we cannot be certain that such discovery or transaction will be on favorable terms, or that, following any such discovery or transaction, we will be able to realize the intended benefits of it.

Research programs and business development efforts to identify new product candidates and technologies require substantial technical, financial and human resources. We may focus our efforts and resources on potential product candidates, technologies or businesses that ultimately prove to be unsuccessful. In-licensing and acquisitions of product candidates, technology or businesses often require significant payments and expenses and consume additional resources. We will need to continue to devote a substantial amount of time and personnel to research, develop and commercialize any such in-licensed or acquired product candidate or technology, or integrate any new business, and we may decide to reprioritize our efforts even after having expended resources on a particular prospect. Our research programs and business development efforts, including businesses or technology acquisitions, collaborations or licensing attempts, may fail to yield additional complementary or successful product candidates for clinical development and commercialization or successful business combinations for a number of reasons, including, but not limited to, the following:

●we may be unsuccessful in identifying potential product candidates or businesses with a high probability of success for development progression;

●we may not be able or willing to assemble sufficient resources or expertise to in-license, acquire or discover additional product candidates or acquire businesses or undertake business combinations, collaborations, or other strategic transactions;

●we may not be able to agree to acceptable terms with potential licensors, partners or acquisition targets;

●we may incur substantial liabilities as part of an acquisition or merger that may not be offset by the benefits of the acquired assets or the synergies we hope to realize; and

●any product candidates or technologies to which we acquire the rights or that we discover may not allow us to leverage our expertise and our development and commercial infrastructure as currently expected.

If any of these events occurs, we may not be successful in executing our growth strategy to identify, discover, develop, in-license or acquire additional product candidates or technologies or to acquire businesses or undertake business combinations, collaborations, or other strategic transactions, or our growth strategy or strategic transactions may not deliver the anticipated results or we may refine or otherwise alter this strategy.

The consummation or performance of any acquisition, business combination, collaboration or other strategic transaction we may undertake in furtherance of our growth strategy or any refined or otherwise altered strategy, may involve additional risks, such as difficulties in assimilating different workplace cultures; retaining personnel and integrating operations, which may be geographically dispersed; increased costs; exposure to liabilities; incurrence of indebtedness; use of a substantial portion of our available cash for all or a portion of the consideration; or causing dilution to our existing shareholders if we issue equity securities for all or a portion of the consideration. If any of these events occurs or we are unable to meet our strategic objectives for any such transaction, we may not be able to achieve the expected benefits from the transaction and our business may be materially harmed.

We have entered into and may seek to enter into collaboration, licensing or other strategic transactions or arrangements to further develop, commercialize or otherwise attempt to realize value from our products and product candidates, and any such transactions or arrangements that we enter into may not be successful or be on favorable terms, which could adversely affect our ability to develop, commercialize or attempt to realize value from our products and product candidates.

We have entered into and may seek to enter into collaboration, licensing or other strategic transactions or arrangements to further develop, commercialize or otherwise attempt to realize value from one or more of our products and product candidates instead of developing or commercializing our products and product candidates ourselves. For

Table of Contents

example, in February 2022, we granted Huadong exclusive rights to develop and commercialize ARCALYST in the Asia Pacific region, excluding Japan. In August 2022, we entered into a license agreement with Genentech where we granted exclusive worldwide rights to develop and commercialize vixarelimab. To the extent that we decide to enter into such transactions or arrangements, we may face significant competition in seeking appropriate collaborators, licensees or other strategic partners. Moreover, these transactions and arrangements are complex and time consuming to negotiate, document, implement and to close or maintain. We may not be successful in our efforts to establish collaborations, licenses or other strategic transactions or arrangements should we choose to do so. The terms of any such transactions or arrangements that we may establish may have unfavorable tax consequences for our shareholders in the United States. Further, granting territory-specific rights for our products and product candidates may reduce their attractiveness for subsequent business development activity. In addition, our right to grant a sublicense of intellectual property licensed to us under certain of our current agreements requires the consent of the applicable licensor.

Any current or future collaborations, licenses or other strategic transactions or arrangements that we enter into may not be successful. The success of these potential collaborations, license arrangements and other strategic transactions or arrangements may depend heavily on the efforts and activities of our collaborators, sublicensees or other strategic partners. We have experienced collaboration failure in the past and may experience similar failures in the future. Collaborations, licenses or other strategic transactions or arrangements are subject to numerous risks, which may include risks that the collaborator, licensee or other strategic partner, as applicable:

●may not pursue development and commercialization of the applicable licensed drugs or may elect not to continue or renew development or commercialization programs based on clinical trial results, changes in their strategic focus due to their acquisition of competitive products or product candidates or their internal development of competitive products and product candidates, availability of funding or other external factors, such as a business combination that diverts resources or creates competing priorities;

●raise disputes with respect to the ownership or inventorship of any intellectual property developed pursuant to our collaborations or licenses;

●may not properly prosecute, maintain or defend our intellectual property rights or may use our intellectual property or proprietary information in a way that gives rise to actual or threatened litigation that could jeopardize or invalidate our intellectual property or proprietary information or expose us to potential liability;

●may own or co-own intellectual property covering products that results from our arrangement with them, that is not properly prepared, prosecuted, maintained or defended in a way that could impact that patentability of the intellectual property or validity for any granted patent, which could shorten the term during which we are owed royalties on such intellectual property;

●may own or co-own intellectual property covering products that results from our arrangement with them, and in such cases, we would not have the exclusive right to develop or commercialize such intellectual property, and even if we are able to license such exclusive rights, we may have to enter into a license agreement that includes obligations to make milestone, royalty or other payments under such agreement;

●may not achieve applicable development, regulatory, or commercial milestones, which may materially impact the collaboration revenue that we expect to realize from such relationship;

●raise disputes that cause the delay or termination of the research, development or commercialization of our current or future products and product candidates or that results in costly litigation or arbitration that diverts management attention and resources;

●cause us to be named defendants in lawsuits due to their improper use of the licensed intellectual property and not indemnify us against losses in such lawsuits;

Table of Contents

●enforce licensed intellectual property rights against third parties that lead such third parties to challenge the validity or enforceability of the licensed intellectual property and potentially cause the licensed intellectual property to become invalid or rendered unenforceable;

●fail to maintain issued licensed patents that are under their control, or prosecute licensed patent applications in ways that diminish their value, all of which actions may adversely affect our business if our agreements with them terminate and the rights to the licensed intellectual property return to us or an upstream licensor; may delay, dispute or refuse to pay milestone and royalty payments, which may impact our ability to satisfy upstream payment obligations, if applicable; and

●may conduct sales and marketing activities or other operations that may not comply with applicable laws, resulting in civil or criminal proceedings.

In addition, disputes may arise with respect to the ownership of any intellectual property developed pursuant to these arrangements. These arrangements may also be terminated, and, if terminated, may result in a need for additional capital to pursue further development or commercialization of the applicable product candidates.

We need to continue to develop our company and expand our scope of operations, and we may encounter difficulties in managing this development and expansion, which could disrupt our operations.

KNSA US Equity

KNSA · 10-K · period ended 2024-12-31

Item 1A.Risk Factors.

KNSA US Equity☆

KNSA · 10-K · period ended 2024-12-31

Item 1A.Risk Factors.

KNSA US Equity