KLIC · Read the filing

Item 1A. RISK FACTORS

Semiconductor Industry and Macroeconomic Risks

Our operating results and financial condition could be adversely impacted by volatile worldwide economic conditions and unpredictable spending by our customers due to uncertainties in the macroeconomic environment.

Though the semiconductor industry's cycle can be independent of the general economy, global economic conditions may have a direct impact on demand for semiconductor units and ultimately demand for semiconductor capital equipment and tools. Accordingly, our business and financial performance is impacted, both positively and negatively, by fluctuations in the macroeconomic environment. Expenditures by our customers depend on the current and anticipated market demand for semiconductors and products that use semiconductors, LEDs and batteries, including mobile devices, personal computers, consumer electronics, telecommunications equipment, automotive components, electric vehicles and other industrial products. Reductions or other fluctuations in our customers' spending as a result of uncertain conditions in the macroeconomic environment, including from government, economic or fiscal instability, global health crises and pandemics, restricted global credit conditions, reduced demand, unbalanced inventory levels, fluctuations in interest rates, higher energy prices, or other conditions, could adversely affect our business, financial condition and operating results. Further, our profitability can be affected by volatility because we incur a certain amount of fixed costs that we cannot modulate up and down to meet increases or decreases in demand. The impact of general economic slowdowns could also make our customers cautious and delay orders until the economic environment becomes clearer. Significant downturns in the market for semiconductor devices or in general economic conditions reduce demand for our products and can materially and adversely affect our business, financial condition and operating results. Our visibility into future demand is generally limited and forecasting is difficult. There can be no assurances regarding levels of demand for our products and we believe historic, industry-wide volatility will persist.

The COVID-19 pandemic has adversely affected our business, and may in the future materially and adversely affect our results of operations and financial condition.

The ongoing COVID-19 pandemic has significantly impacted the global economy, disrupted global supply chains, created significant volatility and disruption in financial markets, and initially significantly increased unemployment levels. As a result of the pandemic, many countries have suspended or restricted travel to and from affected countries and imposed quarantines. In addition, the pandemic has resulted in temporary closures and failures of many businesses and the institution of social distancing and sheltering-in-place requirements in many jurisdictions. As these measures begin to be relaxed, in certain jurisdictions there has been a resurgence of illnesses, potentially leading to more severe restrictions in the future.

While we are currently operating at full capacity in all of our manufacturing locations, work-from-home practices have been instituted from time-to-time across every office worldwide, which have impacted our non-manufacturing productivity, including our research & development.

The COVID-19 pandemic has caused disruptions to our supply chain, including materials, equipment, engineering support and services, due to efforts to contain the spread of COVID-19. It has also caused more difficult and more expensive travel and transportation of our supplies and products, ultimately affecting the sales of our products. In addition, the costs of logistics have increased, and labor shortages have further contributed to rising costs across the supply chain, further exacerbating the impact the pandemic has had on the supply chain.

Other effects of the COVID-19 pandemic on our business will depend on future developments that cannot be accurately predicted at this time, but may include the following:

•a decrease in short-term and/or long-term demand for our products resulting from widespread business shutdowns and slowdowns, quarantines, travel and logistics restrictions and other actions taken by governments, businesses, and the general public in an effort to limit exposure to and spread of COVID-19;

•negative impacts to our operations, technology development, new product introduction and customer qualifications resulting from our efforts to mitigate the impact of COVID-19 through execution of our BCP;

•increased volatility in the semiconductor and electric vehicle industries due to heightened uncertainty, including our inability to keep pace relative to our competitors during a post-COVID-19 market recovery should that occur; and

•reduced sales volume to or loss of customers, or cancellation, delay or reduction of backlogged customer orders.

The ultimate significance of COVID-19 on our business will depend on, among other things: the extent and duration of the pandemic, the severity of the disease and the number of people infected with the virus; the emergence of new variants or strains of the virus; the distribution and effectiveness of available vaccines and the rates at which they are administered; the effects on

Table of Contents

the economy of the pandemic and of the measures taken by governmental authorities and other third parties restricting day-to-day life, international travel and border crossings, and the length of time that such measures remain in place; and governmental programs implemented to assist businesses impacted by the COVID-19 pandemic. At this time, we cannot estimate the short- or long-term impacts of COVID-19 on our business, liquidity, results of operations or financial condition due to the unprecedented and rapidly changing social and economic impacts associated with the COVID-19 pandemic.

We depend on our suppliers, including sole source suppliers, for critical raw materials, components and subassemblies. If our suppliers do not deliver their products to us, or deliver non-compliant or defective products, we would be unable to deliver our products to our customers.

Our products are complex and require raw materials, components and subassemblies having a high degree of reliability, accuracy and performance. We rely on subcontractors to manufacture many of these components and subassemblies and we rely on sole source suppliers for certain key technology parts and raw materials. As a result, we are exposed to a number of significant risks, including:

•decreased control over the manufacturing process for components and subassemblies;

•changes in our manufacturing processes in response to changes in the market, which may delay our shipments;

•our inadvertent use of defective or contaminated raw materials;

•the relatively small operations and limited manufacturing resources of some of our suppliers, which may limit their ability to manufacture and sell subassemblies, components or parts in the volumes we require and at acceptable quality levels and prices;

•restrictions on our ability to rely on suppliers due to changes in trade regulation as well as laws and regulations enacted in response to concerns related to climate change, conflict minerals, or responsible sourcing practices;

•the inability of suppliers to meet our or other customer demand requirements;

•reliability or quality issues with certain key subassemblies provided by single source suppliers as to which we may not have any short-term alternative;

•shortages caused by disruptions at our suppliers and subcontractors for a variety of reasons, including health pandemics (such as the current COVID-19 pandemic), regional or localized stay-at-home orders, work stoppage or fire, earthquake, flooding or other natural disasters;

•delays in the delivery of raw materials or subassemblies, which, in turn, may delay shipments to our customers;

•loss of suppliers as a result of consolidation of suppliers in the industry; and

•loss of suppliers because of their bankruptcy or insolvency.

If any of these risks were to materialize, we might be unable to deliver our products to our customers on time and at expected cost, or at all. For example, during fiscal year 2021 and in the first quarter of fiscal 2022, as demand for many of our products surged to unprecedented levels, some of our suppliers were not able to timely meet our full demand. In some cases, the shortfalls were exacerbated by COVID-19 related disruptions. In particular, at times we were not able to obtain all our chip requirements as the global semiconductor industry suffered broad shortages. To date, these shortages and our resulting inability to deliver our products to some of our customers have not had a material impact on our results of operations or financial condition. However, if demand for our products remains high or increases, or if other challenges in the supply chain continue, our suppliers may again be unable to fulfill all our needs.

If we persistently remain unable to deliver our products to our customers for these or any other reasons, or we are unable to meet customer expectations as to cycle time, or we are unable to maintain acceptable product quality or reliability, we may lose customers as a result or otherwise experience a reduction in the demand for our products, as a result of which our business, financial condition and operating results would be materially and adversely affected.

The semiconductor industry is volatile with sharp periodic downturns and slowdowns. Cyclical industry downturns are made worse by volatile global economic conditions.

The semiconductor industry is volatile, with periods of rapid growth followed by industry-wide retrenchment. These periodic downturns and slowdowns have in the past adversely affected our business, financial condition and operating results.

Table of Contents

Downturns have been characterized by, among other things, diminished product demand, excess production capacity, and accelerated erosion of selling prices. Historically these downturns have severely and negatively affected the industry's demand for capital equipment, including assembly equipment and, to a lesser extent, tools. There can be no assurances regarding levels of demand for our products. In any case, we believe the historical volatility of our business, both upward and downward, will persist.

Difficulties in forecasting demand for our product lines may lead to periodic inventory shortages or excesses.

We typically operate our business with limited visibility of future demand. We do not have long-term contracts with many of our customers. As a result, demand for our products in future periods is difficult to predict and we sometimes experience inventory shortages or excesses. We generally order supplies and otherwise plan our production based on internal forecasts for demand. We have in the past failed, and may again in the future fail, to accurately forecast demand for our products. This has led to, and may in the future lead to, delays in product shipments or, alternatively, an increased risk of inventory obsolescence. If we fail to accurately forecast demand for our products, our business, financial condition and operating results may be materially and adversely affected.

Our quarterly operating results fluctuate significantly and may continue to do so in the future.

In the past, our quarterly operating results have fluctuated significantly. We expect that our quarterly results will continue to fluctuate. Although these fluctuations are partly due to the cyclical and volatile nature of the semiconductor industry, they also reflect other factors, many of which are outside of our control.

Some of the factors that may cause our net revenue and operating margins to fluctuate significantly from period to period are:

•market downturns;

•industry inventory levels;

•the mix of products we sell because, for example:

◦certain lines of equipment within our business segments are more profitable than others; and

◦some sales arrangements have higher gross margins than others;

•canceled or deferred orders;

•seasonality;

•competitive pricing pressures may force us to reduce prices;

•higher than anticipated costs of development or production of new equipment models;

•the availability and cost of the components for our products;

•delays in the development and manufacture of our new products and upgraded versions of our products and market acceptance of these products when introduced;

•customers' delay in purchasing our products due to anticipation that we or our competitors may introduce new or upgraded products; and

•our competitors' introduction of new products.

Many of our expenses, such as research and development, selling, general and administrative expenses, and interest expense, do not vary directly with our net revenue. Our research and development efforts include long-term projects lasting a year or more, which require significant investments. In order to realize the benefits of these projects, we believe that we must continue to fund them even during periods when our revenue has declined. As a result, a decline in our net revenue would adversely affect our operating results as we continue to make these expenditures. In addition, if we were to incur additional expenses in a quarter in which we did not experience comparable increased net revenue, our operating results would decline. In a downturn, we may have excess inventory, which could be written off. Some of the other factors that may cause our expenses to fluctuate from period-to-period include:

•timing and extent of our research and development efforts;

•severance, restructuring, and other costs of relocating facilities;

•inventory write-offs due to obsolescence or other causes; and

•an increase in the cost of labor or materials.

Because our net revenue and operating results are volatile and difficult to predict, we believe consecutive period-to-period or year-over-year comparisons of our operating results may not be a good indication of our future performance.

Table of Contents

Competitive Risks

Our average selling prices usually decline over time and may continue to do so.

Typically, our average selling prices have declined over time due to continuous price pressure from our customers and competitive cost reductions in our industry’s supply chains. We seek to offset this decline by continually reducing our cost structure by consolidating operations in lower cost areas, reducing other operating costs, by pursuing product strategies focused on product performance and customer service, and developing new products for which we are able to charge higher prices. These efforts may not enable us to fully offset price declines, and if they do not, our financial condition and operating results may be materially and adversely affected.

We may not be able to rapidly develop, manufacture and gain market acceptance of new and enhanced products required to maintain or expand our business.

We believe our continued success depends on our ability to continuously develop and manufacture new products and product enhancements on a timely and cost-effective basis. We must introduce these products and product enhancements into the market in a timely manner in response to customers' demands for higher performance assembly equipment and leading-edge materials customized to address rapid technological advances in integrated circuits, and capital equipment designs. Our competitors may develop new products or enhancements to their products that offer improved performance and features, or lower prices which may render our products less competitive. The development and commercialization of new products require significant capital expenditures over an extended period of time, and some products we seek to develop may never become profitable. In addition, we may not be able to develop and introduce products incorporating new technologies in a timely manner that will satisfy our customers' future needs or achieve market acceptance. If we are not able to develop and sell our products that meet the demands of our customers, it would result in lower net revenues and our operating results would be adversely affected.

We may be unable to continue to compete successfully in the highly competitive semiconductor equipment and packaging materials industries.

The semiconductor equipment and packaging materials industries are very competitive. In the semiconductor equipment industry, significant competitive factors include price, speed/throughput, production yield, process control, delivery time, innovation, quality and customer support. In the semiconductor packaging materials industry, competitive factors include price, delivery and quality.

In each of our markets, we face competition and the threat of competition from established competitors and potential new entrants. In addition, established competitors may combine to form larger, better-capitalized companies. Some of our competitors have or may have significantly greater financial, engineering, manufacturing and marketing resources than we do. Some of these competitors are Asian and European companies that have had, and may continue to have, an advantage over us in supplying products to local customers who appear to prefer to purchase from local suppliers.

We expect our competitors to improve their current products' performance, and to introduce new products and materials with improved price and performance characteristics. Our competitors may independently develop technology similar to or better than ours. They may also appropriate our technology and our intellectual property to compete against us and we may not have adequate legal recourse. New product and material introductions by existing competitors or by new market entrants could hurt our sales. If a semiconductor manufacturer or subcontract assembler selects a competitor's product or materials for a particular assembly operation, we may not be able to sell products or materials to that manufacturer or assembler for a significant period of time. Manufacturers and assemblers sometimes develop lasting relationships with suppliers and assembly equipment providers in our industry and often go years without requiring replacement. In addition, we may have to lower our prices in response to price cuts by our competitors, which may materially and adversely affect our business, financial condition and operating results. If we cannot compete successfully, we could lose customers and experience reduced margins and profitability.

Geographic, Trade and Customer Risks

Substantially all of our sales, distribution channels and manufacturing operations are located outside of the U.S., which subjects us to risks, including risks from changes in trade regulations, currency fluctuations, political instability and conflicts.

Over 90% of our net revenue is for shipments to customers located outside of the U.S., primarily in the Asia/Pacific region. In the Asia/Pacific region, our customer base has and continues to become more geographically concentrated in China as a result of economic and industry conditions. Approximately 55.6%, 51.6% and 46.7% of our net revenue for fiscal 2021, 2020, and 2019, respectively, was for shipments to customers located in China.

Table of Contents

We expect our future performance to depend on our ability to continue to compete in foreign markets, particularly in the Asia/Pacific region. Some of these economies have been highly volatile, resulting in significant fluctuation in local currencies, and political and economic instability. These conditions may continue or worsen, which may materially and adversely affect our business, financial condition and operating results.

We also rely on non-U.S. suppliers for materials and components used in our products, and substantially all of our manufacturing operations are located in countries other than the U.S. We manufacture our ball, wedge and APAMA bonders in Singapore, our Hybrid and Electronic Assembly solutions in the Netherlands, our dicing blades, capillaries and bonding wedges in China, and our capillary blanks in Israel and China. We also rely on independent foreign distribution channels for certain of our product lines. As a result, a major portion of our business is subject to the risks associated with international, and particularly Asia/Pacific, commerce, such as:

•stringent and frequently changing trade compliance regulations;

•less protective foreign intellectual property laws;

•longer payment cycles in foreign markets;

•foreign exchange restrictions and capital controls, monetary policies and regulatory requirements;

•restrictions or significant taxes on the repatriation of our assets, including cash;

•tariff and currency fluctuations;

•difficulties of staffing and managing dispersed international operations, including labor work stoppages and strikes in our factories or the factories of our suppliers;

•changes in our structure or tax incentive arrangements;

•possible disagreements with tax authorities;

•episodic events outside our control such as, for example, outbreaks of coronaviruses, influenza or other illnesses;

•natural disasters such as earthquakes, fires or floods;

•risks of war and civil disturbances or other events that may limit or disrupt manufacturing and markets;

•act of terrorism that impact our operations, customers or supply chain or that target U.S. interests or U.S. companies;

•seizure of our foreign assets, including cash;

•changing political conditions; and

•legal systems which are less developed and may be less predictable than those in the U.S.

In addition, there is a potential risk of conflict and instability in the relationship between Taiwan and China which could disrupt the operations of our customers and/or suppliers in both Taiwan and China and our manufacturing operations in China.

Our international operations also depend on favorable trade relations between the U.S. and those foreign countries in which our customers, subcontractors and materials suppliers have operations. A protectionist trade environment in either the U.S. or those foreign countries in which we do business, such as a change in the current tariff structures, export compliance or other trade policies, may materially and adversely affect our ability to sell our products in foreign markets.

Catastrophic events, such as pandemics and extreme weather events as a result of climate change, can have a material adverse effect on our operations and financial results.

Our operations and business, and those of our customers and suppliers, can be disrupted by natural disasters, public health issues (including the COVID-19 pandemic), cybersecurity incidents, interruptions of service from utilities, or other catastrophic events. For example, we have at times experienced temporary disruptions in our manufacturing processes as a result of power outages. Global climate change can result in natural disasters occurring more frequently, with greater intensity and with less predictability. For example, in February 2021, Texas experienced historic cold weather, resulting in prolonged power outages, which impacted our components suppliers who operate there. The long-term effects of climate change on the global economy and the semiconductor industry in particular are unclear but could be severe. Catastrophic events could make it difficult or impossible to manufacture or deliver products to our customers, receive materials from our suppliers, or perform critical

Table of Contents

functions, whether on a timely basis or at all, which could adversely affect our revenue and operations. Some of the systems we maintain as part of our business recovery plans cannot guarantee us protection from such disruptions. Furthermore, even if our operations are unaffected or recover quickly, if our customers or suppliers cannot timely resume their own operations due to a catastrophic event, we may be unable to fulfil our customers' orders, and experience reduced or cancelled orders or other disruptions to our supply chain that may adversely affect our results of operations.

We are subject to export restrictions that may limit our ability to sell to certain customers and the U.S.-China trade war could adversely affect our business.

The U.S. and several other countries levy tariffs on certain goods and impose other trade restrictions that may impact our customers’ investment in manufacturing equipment, reduce the competitiveness of our products, or inhibit our ability to sell products or purchase necessary equipment and supplies. In particular, trade tensions between the U.S. and China have been escalating since 2018, with U.S. tariffs on Chinese goods and retaliatory Chinese tariffs on U.S. goods. We cannot predict what further actions may ultimately be taken with respect to tariffs or trade relations between the U.S. and other countries, what products may be subject to such actions, or what actions may be taken by other countries in response. Further changes in trade policy, tariffs, additional taxes, restrictions on exports or other trade barriers, or restrictions on supplies, equipment, and raw materials, may limit our ability to produce products, increase our selling and/or manufacturing costs, reduce the competitiveness of our products, or inhibit our ability to sell products or purchase necessary equipment and supplies, which could have a material adverse effect on our business, results of operations, or financial condition.

Though nearly all of our manufacturing activities take place outside of the U.S., certain of our advanced packaging products are subject to the EAR because they are based on U.S. technology or contain more than a de minimis amount of controlled U.S. content. The EAR require licenses for, and sometimes prohibit, the export of certain products. The CCL sets forth the types of goods and services controlled by the EAR, including civilian science, technology, and engineering dual use items. For products listed on the CCL, a license may be required as a condition to export depending on the end destination, end use or end user and any applicable license exceptions.

In 2020, the BIS amended the EAR to expand controls on certain foreign products based on U.S. technology and sold to Huawei and certain other companies. This amendment impacts some of our advanced packaging products, which are based on U.S. technology and are within the scope of the expanded EAR controls on Huawei. Therefore, these products cannot be sold to Huawei, and are subject to certain end-use restrictions. To date, this amendment to the EAR has not had a material direct impact on our business, financial condition or results of operations and we do not expect that it will, although it could have indirect impacts, including increasing tensions in U.S. and Chinese trade relations, potentially leading to negative sentiments towards U.S.-based companies among Chinese consumers. Additionally, some end users may prefer to avoid the U.S. supply chain to avoid the application of these regulations.

Future changes in, and responses to, U.S. trade policy could reduce the competitiveness of our products and cause our sales to decline, and therefore could have a material adverse effect on our business, financial condition or results of operations.

Because a small number of customers account for most of our sales, our net revenue could decline if we lose a significant customer.

The semiconductor manufacturing industry is highly concentrated, with a relatively small number of large semiconductor manufacturers and their subcontract assemblers and vertically integrated manufacturers of electronic systems purchasing a substantial portion of our semiconductor assembly equipment and packaging materials. Sales to a relatively small number of customers have historically accounted for a significant percentage of our net revenue. There was one customer with sales representing more than 10% of net revenue in fiscal 2021. Sales to our ten largest customers comprised 62.0% and 50.0% of our net revenue for fiscal 2021 and fiscal 2020, respectively.

We expect a small number of customers will continue to account for a high percentage of our net revenue for the foreseeable future. Thus, our business success depends on our ability to maintain strong relationships with our customers. Any one of a number of factors could adversely affect these relationships. If, for example, during periods of escalating demand for our equipment, we were unable to add inventory and production capacity quickly enough to meet the needs of our customers, or if because of supply chain constraints we are not able to fulfil our customers' orders, they may turn to other suppliers making it more difficult for us to retain their business. We may also make commitments from time-to-time to our customers regarding minimum volumes and performance standards, and if we are unable to meet those commitments, we may incur liabilities to our customers. If we lose orders from a significant customer that we are not able to replace, if a significant customer reduces its orders substantially, or if we incur liabilities for not meeting customer commitments, these losses, reductions or liabilities may materially and adversely affect our business, financial condition and operating results.

Table of Contents

We maintain a backlog of customer orders that is subject to cancellation, reduction or delay in delivery schedules, which may result in lower than expected revenues.

We manufacture products primarily pursuant to purchase orders for current delivery or to forecast, rather than pursuant to long-term supply contracts. As a result, we must commit resources to the manufacture of products without binding purchase commitments from customers. The semiconductor industry is occasionally subject to double-booking and rapid changes in customer outlooks or unexpected build ups of inventory in the supply channel as a result of shifts in end market demand and macro-economic conditions. Accordingly, many of these purchase orders or forecasts may be revised or canceled without penalty. Even in cases where our standard terms and conditions of sale or other contractual arrangements do not permit a customer to cancel an order without penalty, we may from time to time accept cancellations to maintain customer relationships or because of industry practice, custom or other factors. Our inability to sell products after we devote significant resources to them could have a material adverse effect on our levels of inventory, revenues and profitability. While we currently believe our inventory levels are appropriate for the current economic environment, continued global economic uncertainty may result in lower than expected demand.

Human Capital Risks

Increased labor costs and competition for qualified personnel may reduce the efficiency of our flexible manufacturing model and adversely impact our operating results.

There is some uncertainty with respect to the pace of rising labor costs in the various countries in which we operate. In addition, there is substantial competition in China, Singapore, Israel and the Netherlands for qualified and capable manufacturing personnel, which may make it difficult for us to recruit and retain qualified employees. For example, the Singapore border restrictions related to COVID-19 have made hiring and retaining qualified direct labor for our Singapore manufacturing operations in particular more difficult. If we are unable to staff sufficient personnel at our China, Singapore, Israel and the Netherlands facilities or if there are increases in labor costs that we are unable to recover in our pricing to our customers, we may experience increased manufacturing costs, which would adversely affect our operating results.

Our business depends on attracting and retaining management, sales and technical employees as well as on the succession of senior management.

Our future success depends on our ability to hire and retain qualified management, sales, finance, accounting and technical employees, including senior management. Experienced personnel with the relevant and necessary skill sets in our industry are in high demand and competition for their talents is intense, especially in Asia, where most of the Company’s key personnel are located. If we are unable to continue to attract and retain the managerial, marketing, finance, accounting and technical personnel we require, our business, financial condition and operating results may be materially and adversely affected.

Effective succession planning is also important to our long-term success. Failure to ensure effective transfer of knowledge and smooth transitions involving senior management could hinder our strategic planning and execution. From time to time, senior management or other key employees may leave our company. While we strive to reduce the negative impact of such changes, the loss of any key employee could result in significant disruptions to our operations, including adversely affecting the timeliness of product releases, the successful implementation and completion of company initiatives, the effectiveness of our disclosure controls and procedures and our internal control over financial reporting, and the results of our operations. In addition, hiring, training, and successfully integrating replacement critical personnel could be time consuming, may cause additional disruptions to our operations, and may be unsuccessful, which could negatively impact future revenues.

Product Risks

Alternative packaging technologies may render some of our products obsolete and materially and adversely affect our overall business and financial results.

Alternative packaging technologies have emerged that may improve device performance or reduce the size of an integrated circuit package, as compared to traditional wire bonding. These technologies include flip chip and wafer-level packaging. Some of these alternative technologies eliminate the need for wires to establish the electrical connection between a die and its package. The semiconductor industry may, in the future, shift a significant part of its volume into alternative packaging technologies which do not employ our products. If a significant shift to alternative packaging technologies or to another technology not offered by us were to occur, demand for our equipment and related packaging materials may be materially and adversely affected. Given that a majority of our revenue comes from wire bonding, a reduced demand for our wire bonding equipment could materially and adversely affect our financial results.

Table of Contents

We send products and equipment to customers or potential customers for trial, evaluation or other purposes which may result in retrofit charges, impairments or write-down of inventory value if the products and equipment are not subsequently purchased by the customers.

From time to time we send certain products and equipment to customers or potential customers for testing, evaluation or other purposes in advance of receiving any confirmation of purchase or purchase orders. Such equipment may be at the customer location for an extended period of time per the agreements with these customers and potential customers. The customer may refuse to buy all or partial quantities of such product or equipment and return this back to us. As a result, we may incur charges to retrofit the machines or sell the machines as second hand at a lower price, and accordingly may have to record impairments on the returned inventory, all of which would adversely affect our operating results.

Undetected problems in our products could directly impair our financial results.

If errata (deviations from product specifications) or flaws in design, production, assembly or testing of our products (by us or our suppliers) were to occur, we could experience a rate of failure in our products that would result in materially adverse consequences, including:

•incurring warranty expenses;

•writing off the value of inventory;

•disposing of products that cannot be fixed;

•retrofitting products that have been shipped;

•providing product replacements or modifications; and

•defending against litigation.

Continued improvement in manufacturing capabilities, control of material and manufacturing quality and costs and product testing are critical factors in our future growth. There can be no assurance that our efforts to monitor, develop, modify and implement appropriate tests and manufacturing processes for our products will be sufficient to permit us to avoid a rate of failure in our products that results in substantial delays in shipment, significant repair or replacement costs, potential damage to our reputation or general customer dissatisfaction with our products. We may also not be able to obtain product liability or other insurance to fully cover such risks. Any of the foregoing risks, if they were to materialize, could have a material adverse effect on our business, results of operations or financial condition.

Operations and Supply Chain Risks

We may not be able to continue to consolidate manufacturing and other facilities or entities without incurring unanticipated costs and disruptions to our business.

As part of our ongoing efforts to drive further efficiency, we may consolidate our manufacturing and other facilities or entities. Should we consolidate, we may experience unanticipated events, including the actions of governments, suppliers, employees or customers, which may result in unanticipated costs and disruptions to our business. We may also incur restructuring charges, severance costs, asset impairments and other effects that could negatively impact our financial condition and results of operations.

We may be materially and adversely affected by environmental and safety laws and regulations, including laws and regulations implemented in response to climate change.

We are subject to various federal, state, local and foreign laws and regulations governing, among other things, the generation, storage, use, emission, discharge, transportation and disposal of hazardous material, investigation and remediation of contaminated sites and the health and safety of our employees. Increasingly, public attention has focused on the environmental impact of manufacturing operations and the risk to neighbors of chemical releases from such operations. Regulations in response to climate change could result in increased manufacturing costs (for us and for our suppliers) associated with air pollution requirements and increased compliance and energy costs.

Proper waste disposal plays an important role in the operation of our manufacturing plants. In many of our facilities we maintain wastewater treatment systems that remove metals and other contaminants from process wastewater. These facilities operate under permits that must be renewed periodically. A violation of those permits may lead to revocation of the permits, fines, penalties or the incurrence of capital or other costs to comply with the permits, including potential shutdown of operations.

Table of Contents

Compliance with existing or future land use, environmental, climate-related and health and safety laws and regulations may: (1) result in significant costs to us for additional capital equipment or other process requirements, (2) restrict our ability to expand our operations and/or (3) cause us to curtail our operations. We also could incur significant costs, including cleanup costs, fines or other sanctions and third-party claims for property damage or personal injury, as a result of violations of or liabilities under such laws and regulations. To the extent that higher costs result in higher prices for our products, we may experience a reduction in the demand for those products, which could negatively affect our results of operations. Conversely, we may not be able to pass these increased costs onto our customers in the form of higher prices, as a result of which our results of operations may also be adversely affected.

We may acquire or divest businesses or enter into joint ventures or strategic alliances, which may materially affect our business, financial condition and operating results.

We continually evaluate our portfolio of businesses and may decide to buy or sell businesses or enter into joint ventures or other strategic alliances. We may be unable to successfully integrate acquired businesses with our existing businesses and successfully implement, improve and expand our systems, procedures and controls to accommodate these acquisitions. These transactions place additional demands on our management and current labor force. Additionally, these transactions require significant resources from our legal, finance and business teams. In addition, we may divest existing businesses, which would cause a decline in revenue or profitability and may make our financial results more volatile.If we fail to integrate and manage acquired businesses successfully or to mitigate the risks associated with divestitures, joint ventures or other alliances, our business, financial condition and operating results may be materially and adversely affected.

Intellectual Property Risks

Our success depends in part on our intellectual property, which we may be unable to protect.

Our success depends in part on our proprietary technology. To protect this technology, we rely principally on contractual restrictions (such as nondisclosure and confidentiality provisions) in our agreements with employees, subcontractors, vendors, consultants and customers and on the common law of trade secrets and proprietary “know-how.” We also rely, in some cases, on patent and copyright protection, although this protection may in some cases be insufficient due to the rapid development of technology in our industry. We may not be successful in protecting our technology for a number of reasons, including the following:

•employees, subcontractors, vendors, consultants and customers may violate their contractual agreements, and the cost of enforcing those agreements may be prohibitive, or those agreements may be unenforceable or more limited than we anticipate;

•foreign intellectual property laws may not adequately protect our intellectual property rights; and

•our patent and copyright claims may not be sufficiently broad to effectively protect our technology; our patents or copyrights may be challenged, invalidated or circumvented; or we may otherwise be unable to obtain adequate protection for our technology.

Also, competitors may copy or misappropriate our trade secrets, products or designs either through lawful means of reverse engineering or through unlawful means that we are unable to prove, in either case eroding our market share. In addition, our partners and alliances may have rights to technology developed by us. We may incur significant expense to protect or enforce our intellectual property rights. If we are unable to protect our intellectual property rights, our competitive position may be weakened.

Third parties may claim we are infringing on their intellectual property, which could cause us to incur significant litigation costs or other expenses, or prevent us from selling some of our products.

The semiconductor industry is characterized by rapid technological change, with frequent introductions of new products and technologies. Industry participants often develop products and features similar to those introduced by others, creating a risk that their products and processes may give rise to claims they infringe on the intellectual property of others. We may unknowingly infringe on the intellectual property rights of others and incur significant liability for that infringement. If we are found to have infringed on the intellectual property rights of others, we could be enjoined from continuing to manufacture, market or use the affected product, or be required to obtain a license to continue manufacturing or using the affected product. A license could be very expensive to obtain or may not be available at all. Similarly, changing or re-engineering our products or processes to avoid infringing the rights of others may be costly, impractical or time consuming.

Table of Contents

Occasionally, third parties assert that we are, or may be, infringing on or misappropriating their intellectual property rights. In these cases, we defend, and will continue to defend, against claims or negotiate licenses where we consider these actions appropriate. Intellectual property cases are uncertain and involve complex legal and factual questions. If we become involved in this type of litigation, it could consume significant resources and divert our attention from our business.

Information Technology and Enterprise System Risks

We may be subject to disruptions or failures in our information technology systems and network infrastructures that could have a material adverse effect on us.

We maintain and rely extensively on information technology systems and network infrastructures for the effective operation of our business. We also hold large amounts of data in data center facilities around the world, primarily in Singapore and the U.S., on which our business depends. A disruption, infiltration or failure of our information technology systems or any of our data centers as a result of software or hardware malfunctions, computer viruses, cyber-attacks, employee theft or misuse, power disruptions, natural disasters or accidents could cause breaches of data security and loss of critical data, which in turn could materially adversely affect our business. Our security procedures, such as virus protection software and our business continuity planning, such as our disaster recovery policies and back-up systems, may not be adequate or implemented properly to fully address the adverse effect of such events, which could adversely impact our operations. In addition, our business could be adversely affected to the extent we do not make the appropriate level of investment in our technology systems as our technology systems become out-of-date or obsolete and are not able to deliver the type of data integrity and reporting we need to run our business. Furthermore, when we implement new systems and/or upgrade existing systems, we could be faced with temporary or prolonged disruptions that could adversely affect our business.

We have experienced, and expect to continue to be subject to, cybersecurity threats and incidents, ranging from employee error or misuse, to individual attempts to gain unauthorized access to information systems, to sophisticated and targeted measures known as advanced persistent threats, none of which have been material to the Company to date. We devote significant resources to network security and other measures to protect our systems and data from unauthorized access or misuse. However, depending on the nature and scope, cybersecurity incidents could result in business disruption; the misappropriation, corruption or loss of confidential information and critical data (of the Company or that of third parties); reputational damage; litigation with third parties; diminution in the value of our investment in research, development and engineering; data privacy issues; and increased cybersecurity protection and remediation costs.

We are implementing a new enterprise resource planning system. Our failure to implement it successfully, on time and on budget could have a material adverse effect on us.

We are currently implementing a new enterprise resource planning (“ERP”) system and will be implementing the new system over the next two years. ERP implementations are complex, time-consuming, and involve substantial expenditures on system software and implementation activities. The ERP system will be critical to our ability to provide important information to our management, obtain and deliver products, provide services and customer support, send invoices and track payments, fulfill contractual obligations, accurately maintain books and records, provide accurate, timely and reliable reports on our financial and operating results, and otherwise operate our business. ERP implementations also require transformation of business and financial processes in order to reap the benefits of the ERP system. Any such implementation involves risks inherent in the conversion to a new computer system, including loss of information and potential disruption to our normal operations. The implementation and maintenance of the new ERP system has required, and will continue to require, the investment of significant financial and human resources and the implementation may be subject to delays and cost overruns. In addition, we may not be able to successfully complete the implementation of the new ERP system without experiencing difficulties. Any disruptions, delays or deficiencies in the design and implementation or the ongoing maintenance of the new ERP system could adversely affect our ability to process orders, ship products, provide services and customer support, send invoices and track payments, fulfill contractual obligations, accurately maintain books and records, provide accurate, timely and reliable reports on our financial and operating results, including reports required by the SEC, andotherwise operate our business. Additionally, if we do not effectively implement the ERP system as planned or the system does not operate as intended, the effectiveness of our internal control over financial reporting could be adversely affected or our ability to assess it adequately could be delayed.

Currency and Tax Risks

We are exposed to fluctuations in currency exchange rates that could negatively impact our financial results and cash flows.

Because most of our foreign sales are denominated in U.S. dollar or Euro, an increase in value of the U.S. dollar or the Euro against foreign currencies will make our products more expensive than those offered by some of our foreign competitors. In addition, a weakening of the U.S. dollar against other currencies other than the Euro could make our costs in non-U.S. locations

Table of Contents

more expensive to fund. Our ability to compete overseas may therefore be materially and adversely affected by the fluctuations of the U.S. dollar or the Euro against other currencies.

Because nearly all of our business is conducted outside the U.S., we face exposure to adverse movements in foreign currency exchange rates which could have a material adverse impact on our financial results and cash flows. Historically, our primary exposures have related to net working capital exposures denominated in currencies other than the foreign subsidiaries' functional currency, and remeasurement of our foreign subsidiaries' net monetary assets from the subsidiaries' local currency into the subsidiaries' functional currency. In general, an increase in the value of the U.S. dollar could require certain of our foreign subsidiaries to record translation and remeasurement gains. Conversely, a decrease in the value of the U.S. dollar could require certain of our foreign subsidiaries to record losses on translation and remeasurement. An increase in the value of the U.S. dollar could increase the cost to our customers of our products in those markets outside the U.S. where we sell in U.S. dollars, and a weakened U.S. dollar could increase the cost of local operating expenses and procurement of raw materials, both of which could have an adverse effect on our cash flows. Our primary exposures include the Singapore Dollar, Chinese Yuan, Japanese Yen, Swiss Franc, Philippine Peso, Thai Baht, Taiwan Dollar, South Korean Won, Israeli Shekel and Euro. Although we from time to time have entered into foreign exchange forward contracts to hedge certain foreign currency exposure of our operating expenses, our attempts to hedge against these risks may not be successful and may result in a material adverse impact on our financial results and cash flows.

Changes to our existing tax incentive in Singapore may materially reduce our reported results of operations in future periods.

Our existing tax incentive, scheduled to expire in our fiscal 2025, allows certain classes of income to be subject to reduced income tax rates in Singapore provided we meet certain employment and investment conditions. If we cannot, or elect not to, comply with these conditions, we could be required to refund material tax benefits previously realized with respect to this tax incentive. Subsequent renewals are at the discretion of the Singapore government and we may not be able to extend the tax incentive arrangement beyond its expiration date or we may also elect not to renew this tax incentive arrangement. In the absence of the tax incentive, the income tax rate in Singapore that would otherwise apply is 17%, which would result in a significant increase in our provision for (benefit from) income taxes in future periods.

Changes in tax legislation could adversely impact our future profitability.

We are subject to income taxes in the U.S. and many foreign jurisdictions. Tax laws and regulations are continuously evolving with corporate tax reform, base-erosion efforts, and increased transparency continuing to be high priorities in many tax jurisdictions in which we operate.Although the timing and methods of implementation may vary, many countries, including those in the Asia/Pacific region in which we have significant operations, have implemented, or are in the process of implementing, legislation or practices inspired by the base erosion and profit shifting project undertaken by the Organization for Economic Co-operation and Development ("OECD"). Also, while too early to predict the outcome, if the tax regulation changes contemplated by the Biden administration and the recent OECD agreement on global minimum tax of 15% were to be enacted, they could materially increase future tax expense. Further, the increased scrutiny on international tax and continuous changes to countries’ tax legislation may also affect the policies and decisions of tax authorities with respect to certain income tax and transfer pricing positions taken by the Company in prior or future periods. We continue to monitor new tax legislation or other developments since significant changes in tax legislation, or in the interpretation of existing legislation, could materially and adversely affect our financial condition and operating results.

Other changes in taxation could materially impact our future effective tax rate.

Additionally, our future effective tax rate could be affected by numerous other factors including higher or lower than anticipated foreign earnings in various jurisdictions where we are subjected to tax rates that differ from the U.S. federal statutory tax rate, by changes in the valuation allowances recorded against certain deferred tax balances, or by changes in accounting principles and reporting requirements, or interpretations and application thereof. Changes in our assertion for foreign earnings permanently or non-permanently reinvested as a result of changes in facts and circumstances and challenges by tax authorities to our historic or future tax positions and transfer pricing policies could also significantly adversely impact our future effective tax rate.

Risks Related to Our Shares and Corporate Law

We have the ability to issue additional equity securities, which would lead to dilution of our issued and outstanding common shares.

We may from time to time issue additional equity securities or securities convertible into equity securities, which would result in dilution of our existing shareholders' equity interests in us. Our board of directors has the authority to issue, without vote or

Table of Contents

action of shareholders, preferred shares in one or more series, and has the ability to fix the rights, preferences, privileges and restrictions of any such series. Any such series of preferred shares could contain dividend rights, conversion rights, voting rights, terms of redemption, redemption prices, liquidation preferences or other rights superior to the rights of holders of our common shares. In addition, we are authorized to issue, without shareholder approval, up to an aggregate of 200 million common shares, of which approximately 61.9 million shares were outstanding as of October 2, 2021. We are also authorized to issue, without shareholder approval (except as required by the rules of the Nasdaq stock market), securities convertible into either common shares or preferred shares. We may issue such shares in connection with financing transactions, joint ventures, mergers and acquisitions or other purposes. In addition, our shareholders will experience additional dilution when performance or restricted share units vest and settle, when we issue equity awards to our employees under our equity incentive plans, or when we otherwise issue additional equity.

Anti-takeover provisions in our articles of incorporation and bylaws and under Pennsylvania law may discourage other companies from attempting to acquire us.

Some provisions of our articles of incorporation and bylaws as well as Pennsylvania law may discourage some transactions where we would otherwise experience a fundamental change. For example, our articles of incorporation and bylaws contain provisions that:

•classify our board of directors into four classes, with one class being elected each year;

•permit our board to issue “blank check” preferred shares without shareholder approval; and

•prohibit us from engaging in some types of business combinations with a holder of 20% or more of our voting securities without super-majority board or shareholder approval.

Further, under the Pennsylvania Business Corporation Law, because our shareholders approved bylaw provisions that provide for a classified board of directors, shareholders may remove directors only for cause. These provisions and some other provisions of the Pennsylvania Business Corporation Law could delay, defer or prevent us from experiencing a fundamental change and may adversely affect our common shareholders' voting and other rights.

Item 1B. UNRESOLVED STAFF COMMENTS

None.

Table of Contents

Item 2. PROPERTIES

The following table reflects our major facilities as of October 2, 2021:

Facility (1) Approximate Size Function Business Segment Lease Expiration Date

(1)Each of the facilities listed in this table is leased other than the facility in Suzhou, China and Fort Washington, Pennsylvania

(2)Includes lease extension periods at the Company's option. Initial lease expires in November 2023.

(3)Includes lease extension periods at the Company's option. Initial lease expires in September 2025.

(4)Includes lease extension periods at the Company's option. Initial lease expires in August 2026.

(5)Includes lease extension periods at the Company's option. Initial lease expires in October 2027.

In addition, the Company rents space for sales support, customer support, services and administrative functions in China, Germany, Japan, Malaysia, South Korea, Switzerland, Taiwan, Thailand, Vietnam and the Philippines. The Company believes the facilities are generally in good condition and suitable to the extent of utilization needed.

Item 3.LEGAL PROCEEDINGS

From time to time, we may be a plaintiff or defendant in cases arising out of our business. We are party to ordinary, routine litigation incidental to our business. We cannot be assured of the results of any pending or future litigation, but we do not believe resolution of any currently pending matters will materially or adversely affect our business, financial condition or operating results.

Item 4.MINE SAFETY DISCLOSURES

Not applicable.

Table of Contents

PART II

Item 5.MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock is traded on The Nasdaq Global Market (“Nasdaq”) under the symbol “KLIC.” On November 12, 2021, there were approximately 170 holders of record of the shares of outstanding common stock.

On August 26, 2021, May 28, 2021, March 5, 2021 and December 10, 2010, the Board of Directors declared a quarterly dividend $0.14 per share of common stock. During the fiscal year ended October 2, 2021, the Company declared dividends of $0.56 per share of common stock. The declaration of any future cash dividend is at the discretion of the Board of Directors and will depend on the Company's financial condition, results of operations, capital requirements, business conditions and other factors, as well as a determination that such dividends are in the best interests of the Company's stockholders.

For the purpose of calculating the aggregate market value of shares of our common stock held by non-affiliates, as shown on the cover page of this report, we have assumed all of our outstanding shares were held by non-affiliates except for shares held by our directors and executive officers. However, this does not necessarily mean that all directors and executive officers of the Company are, in fact, affiliates of the Company, or there are no other persons who may be deemed to be affiliates of the Company. Further information concerning the beneficial ownership of our executive officers, directors and principal shareholders will be included in our Proxy Statement for the 2022 Annual Meeting of Shareholders to be filed with the Securities and Exchange Commission on or about January 14, 2022.

Recent Sales of Unregistered Securities and Use of Proceeds

None.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

The following table summarizes the repurchases of common stock during the three months ended October 2, 2021 (in thousands, except per share amounts):

For the three months ended October 2, 2021 62 62

(1)On August 15, 2017, the Company's Board of Directors authorized a program (the "Program") to repurchase up to $100 million in total of the Company's common stock on or before August 1, 2020. In 2018 and 2019, the Board of Directors increased the share repurchase authorization under the Program to $200 million and $300 million, respectively. On July 3, 2020, the Board of Directors increased the share repurchase authorization under the Company’s existing share repurchase program by an additional $100 million to $400 million, and extended its duration through August 1, 2022. The Company may purchase shares of its common stock through open market and privately negotiated transactions at prices deemed appropriate by management. The Company has entered into a written trading plan under Rule 10b5-1 of the Exchange Act to facilitate repurchases under the Program. The Program may be suspended or discontinued at any time and will be funded using the Company's available cash, cash equivalents and short-term investments. The timing and amount of repurchase transactions under the Program depend on market conditions as well as corporate and regulatory considerations.

Item 6. [Reserved]

Not applicable.

Table of Contents

Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

In addition to historical information, this filing contains statements relating to future events or our future results. These statements are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, as amended (the “Securities Act”) and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and are subject to the safe harbor provisions created by statute. Such forward-looking statements include, but are not limited to, statements with respect to our future revenue, increasing, continuing or strengthening, or decreasing or weakening, demand for our products, replacement demand, our research and development efforts, our ability to identify and realize new growth opportunities, our ability to control costs and our operational flexibility as a result of (among other factors):

•our expectations regarding the potential impacts on our business of the COVID-19 pandemic, including supply chain disruptions, the economic and public health effects, and of governmental and other responses to these impacts;

•projected growth rates in the overall semiconductor industry, the semiconductor assembly equipment market, and the market for semiconductor packaging materials; and

•projected demand for ball bonder, wedge bonder, advanced packaging and electronic assembly equipment and for tools, spare parts and services.

Generally, words such as “may,” “will,” “should,” “could,” “anticipate,” “expect,” “intend,” “estimate,” “plan,” “continue,” “goal” and “believe,” or the negative of or other variations on these and other similar expressions identify forward-looking statements. These forward-looking statements are made only as of the date of this filing. We do not undertake to update or revise the forward-looking statements, whether as a result of new information, future events or otherwise.

Forward-looking statements are based on current expectations and involve risks and uncertainties. Our future results could differ significantly from those expressed or implied by our forward-looking statements. These risks and uncertainties include, without limitation, those described below and under the heading “Risk Factors” in this Annual Report on Form 10-K and our other reports and registration statements filed from time to time with the Securities and Exchange Commission. This discussion should be read in conjunction with our audited financial statements included in this Annual Report.

We operate in a rapidly changing and competitive environment. New risks emerge from time to time and it is not possible for us to predict all risks that may affect us. Future events and actual results, performance and achievements could differ materially from those set forth in, contemplated by or underlying the forward-looking statements, which speak only as of the date on which they were made. Except as required by law, we assume no obligation to update or revise any forward-looking statement to reflect actual results or changes in, or additions to, the factors affecting such forward-looking statements. Given those risks and uncertainties, investors should not place undue reliance on forward-looking statements as predictions of actual results.

This section of this Form 10-K generally discusses fiscal 2021 and 2020 items and year-to-year comparisons between fiscal 2021 and 2020. Discussions of fiscal 2019 items and year-to-year comparisons between fiscal 2020 and 2019 that are not included in this Form 10-K can be found in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Part II, Item 7 of the Company’s Annual Report on Form 10-K for the fiscal year ended October 3, 2020.

Our Management's Discussion and Analysis ("MD&A") is provided in addition to the accompanying consolidated financial statements and notes to assist readers in understanding our results of operations, financial condition, and cash flows. The MD&A is organized as follows:

•Overview: Introduction of our operations, key events, business environment, technology leadership, products and services

•Critical Accounting Policies

•Recent Accounting Pronouncements

•Results of Operations

•Liquidity and Capital Resources

•Other Obligations and Contingent Payments

Overview

For an overview of our business, see "Part I – Item 1. – Business".

Table of Contents

Critical Accounting Policies

The preparation of consolidated financial statements requires us to make assumptions, estimates and judgments that affect the reported amounts of assets and liabilities, net revenue and expenses during the reporting periods, and disclosures of contingent assets and liabilities as of the date of the consolidated financial statements. On an ongoing basis, we evaluate estimates, including, but not limited to, those related to accounts receivable, reserves for excess and obsolete inventory, carrying value and lives of fixed assets, goodwill and intangible assets, income taxes, equity-based compensation expense and warranties. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable. As a result, we make judgments regarding the carrying values of our assets and liabilities that are not readily apparent from other sources. Authoritative pronouncements, historical experience and assumptions are used as the basis for making estimates, and on an ongoing basis, we evaluate these estimates. Actual results may differ from these estimates.

We believe the following critical accounting policies, which have been reviewed with the Audit Committee of our Board of Directors, reflect our more significant judgments and estimates used in the preparation of our consolidated financial statements.

Revenue Recognition

In accordance with ASC No. 606, Revenue from Contracts with Customers, the Company recognizes revenue when we satisfy performance obligations as evidenced by the transfer of control of our products or services to customers. In general, the Company generates revenue from product sales, either directly to customers or to distributors. In determining whether a contract exists, we evaluate the terms of the agreement, the relationship with the customer or distributor and their ability to pay.

The Company recognizes revenue from sales of our products, including sales to our distributors, at a point in time, generally upon shipment or delivery to the customer or distributor, depending upon the terms of the sales order. Control is considered transferred when title and risk of loss pass, when the customer becomes obligated to pay and, where applicable, when the customer has accepted the products or upon expiration of the acceptance period. For sales to distributors, payment is due on our standard commercial terms and is not contingent upon resale of the products.

Our business is subject to contingencies related to customer orders, including:

•Right of Return: A large portion of our revenue comes from the sale of equipment used in the semiconductor assembly process. Other product sales relate to consumable products, which are sold in high-volume quantities, and are generally maintained at low stock levels at the customer's facility. Customer returns have historically represented a very small percentage of customer sales on an annual basis.

•Warranties: Our equipment is generally shipped with a one-year warranty against manufacturing defects. We establish reserves for estimated warranty expense when revenue for the related equipment is recognized. The reserve for estimated warranty expense is based upon historical experience and management's estimate of future expenses, including product parts replacement, freight charges and labor costs expected to be incurred to correct product failures during the warranty period.

•Conditions of Acceptance: Sales of our consumable products generally do not have customer acceptance terms. In certain cases, sales of our equipment have customer acceptance clauses which may require the equipment to perform in accordance with customer specifications or when installed at the customer's facility. In such cases, if the terms of acceptance are satisfied at our facility prior to shipment, the revenue for the equipment will be recognized upon shipment. If the terms of acceptance are satisfied at our customers' facilities, the revenue for the equipment will not be recognized until acceptance, which is typically obtained after installation and testing, is received from the customer.

Service revenue is generally recognized over time as the services are performed.

The Company measures revenue based on the amount of consideration we expect to be entitled to in exchange for products or services. Any variable consideration such as sales incentives are recognized as a reduction of net revenue at the time of revenue recognition.

The length of time between invoicing and payment is not significant under our payment terms. In instances where the timing of revenue recognition differs from the timing of invoicing, we have determined our contracts generally do not include a significant financing component. Shipping and handling costs billed to customers are recognized in net revenue.

Shipping and handling costs paid by the Company are included in cost of sales.

Allowance for Doubtful Accounts

We maintain allowances for doubtful accounts for estimated losses resulting from our customers' failure to make required payments. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make

Table of Contents

payments, additional allowances may be required. We are subject to concentrations of customers and sales to a few geographic locations, which could also impact the collectability of certain receivables. If global or regional economic conditions deteriorate or political conditions were to change in some of the countries where we do business, it could have a significant impact on our results of operations, and our ability to realize the full value of our accounts receivable.

Inventories

Inventories are stated at the lower of cost (on a first-in, first-out basis) or net realizable value. We generally provide reserves for obsolete inventory and for inventory considered to be in excess of demand. Demand is generally defined as 18 months forecasted future consumption for equipment, 24 months forecasted future consumption for spare parts, and 12 months forecasted future consumption for tools. Forecasted consumption is based upon internal projections, historical sales volumes, customer order activity and a review of consumable inventory levels at customers' facilities. We communicate forecasts of our future consumption to our suppliers and adjust commitments to those suppliers accordingly. If required, we reserve the difference between the carrying value of our inventory and the lower of cost or net realizable value, based upon projections about future consumption, and market conditions. If actual market conditions are less favorable than projections, additional inventory reserves may be required.

Inventory reserve provision for certain subsidiaries is determined based on management's estimate of future consumption for equipment and spare parts. This estimate is based on historical sales volumes, internal projections and market developments and trends.

Accounting for Impairment of Goodwill

ASC No. 350, Intangibles-Goodwill and Other requires goodwill and other intangible assets with indefinite lives to be reviewed for impairment annually, or more frequently if circumstances indicate a possible impairment. We assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying value. If, after assessing the qualitative factors, a company determines that it is not more likely than not that the fair value of a reporting unit is less than its carrying value, then performing the impairment test is unnecessary. However, if a company concludes otherwise, then it is required to perform the goodwill impairment test. The Company's impairment test is performed by comparing the fair value of a reporting unit with its carrying value, and determining if the carrying amount exceeds its fair value.

As part of the annual evaluation, the Company performs an impairment test of its goodwill in the fourth quarter of each fiscal year to coincide with the completion of its annual forecasting and refreshing of its business outlook processes. On an ongoing basis, the Company monitors if a “triggering” event has occurred that may have the effect of reducing the fair value of a reporting unit below its respective carrying value. Adverse changes in expected operating results and/or unfavorable changes in other economic factors used to estimate fair values could result in a non-cash impairment charge in the future.

Impairment assessments inherently involve judgment as to the assumptions made about the expected future cash flows and the impact of market conditions on those assumptions. Future events and changing market conditions may impact the assumptions as to prices, costs, growth rates or other factors that may result in changes in the estimates of future cash flows. Although the Company believes the assumptions that it has used in testing for impairment are reasonable, significant changes in any one of the assumptions could produce a significantly different result. Indicators of potential impairment, including significant and unforeseen customer losses, a significant adverse change in legal factors or in the business climate, a significant adverse action or assessment by a regulator, a significant stock price decline or unanticipated competition, may lead the Company to perform interim goodwill impairment assessments.

For further information on goodwill and other intangible assets, see Note 4 to our consolidated financial statements in Item 8.

Income Taxes

In accordance with ASC No. 740, Income Taxes, deferred income taxes are determined using the balance sheet method. The Company records a valuation allowance to reduce its deferred tax assets to the amount expected, on a more likely than not basis, to be realized. While the Company has considered future taxable income and ongoing tax planning strategies in assessing the need for the valuation allowance, if it were to determine that it would be able to realize its deferred tax assets in the future in excess of its net recorded amount, an adjustment to deferred tax assets would increase income in the period when such determination is made. Likewise, should the Company determine that it would not be able to realize all or part of its deferred tax assets in the future, an adjustment to deferred tax assets would decrease income in the period when such determination is made.

The Company determines the amount of unrecognized tax benefit with respect to uncertain tax positions taken or expected to be taken on its income tax returns in accordance with ASC No. 740 Topic 10, Income Taxes, General (“ASC 740.10”). Under ASC 740.10, the Company utilizes a two-step approach for evaluating uncertain tax positions. Step one, or recognition,

Table of Contents

requires a company to determine if the weight of available evidence indicates a tax position is more likely than not to be sustained upon examination solely based on its technical merit. Step two, or measurement, is based on the largest amount of benefit, which is more likely than not to be realized on settlement with the taxing authority, including resolution of related appeals or litigation processes, if any.

Equity-Based Compensation

The Company accounts for equity-based compensation under the provisions of ASC No. 718, Compensation - Stock Compensation (“ASC 718”). ASC 718 requires the recognition of the fair value of the equity-based compensation in net income. Compensation expense associated with Relative TSR Performance Share Units is determined using a Monte-Carlo valuation model, and compensation expense associated with time-based and Growth Performance Share Units is determined based on the number of shares granted and the fair value on the date of grant. See Note 11 to our consolidated financial statements in Item 8 for a summary of the terms of these performance-based awards. The fair value of the Company's stock option awards are estimated using a Black-Scholes option valuation model. The fair value of equity-based awards is amortized over the vesting period of the award and the Company elected to use the straight-line method for awards granted after the adoption of ASC 718.

RECENT ACCOUNTING PRONOUNCEMENTS

See Note 1 to our consolidated financial statements in Item 8 for a description of certain recent accounting pronouncements, including the expected dates of adoption and effects on our consolidated results of operations and financial condition.

RESULTS OF OPERATIONS

Results of Operations for fiscal 2021 and 2020

The following table reflects our income from operations for fiscal 2021 and 2020:

Fiscal

(dollar amounts in thousands) 2021 2020 $ Change % Change

Bookings and Backlog

Our backlog consists of customer orders scheduled for shipment within the next twelve months. A booking is recorded when a customer order is reviewed and it is determined that all specifications can be met, production (or service) can be scheduled, a delivery date can be set, and the customer meets our credit requirements. We use bookings to evaluate the results of our operations, generate future operating plans and assess the performance of our company. While we believe that this measure is useful in evaluating our business, this information should be considered as supplemental in nature and is not meant as a substitute for revenue recognized in accordance with GAAP. In addition, other companies, including companies in our industry, may calculate bookings differently or not at all, which reduces its usefulness as a comparative measure. Reconciliation of bookings to net revenue is not practicable. A majority of our orders are subject to cancellation or deferral by our customers with limited or no penalties. Also, customer demand for our products can vary dramatically without prior notice. Because of the volatility of customer demand, possibility of customer changes in delivery schedules or cancellations and potential delays in product shipments, our backlog as of any particular date may not be indicative of net revenue for any succeeding period.

Table of Contents

The following tables reflect our bookings and backlog for fiscal 2021 and 2020:

Fiscal

As of

The semiconductor industry is volatile and our operating results are adversely impacted by volatile worldwide economic conditions. Though the semiconductor industry's cycle can be independent of the general economy, global economic conditions may have a direct impact on demand for semiconductor units and ultimately demand for semiconductor capital equipment and expendable tools. Accordingly, our business and financial performance is impacted, both positively and negatively, by fluctuations in the macroeconomic environment. Our visibility into future demand is generally limited and forecasting is difficult. There can be no assurances regarding levels of demand for our products and we believe historical industry-wide volatility will persist.

The U.S. and several other countries have levied tariffs on certain goods. In particular, trade tensions between the U.S. and China have been escalating since 2018, with U.S. tariffs on Chinese goods and retaliatory Chinese tariffs on U.S. goods. These have resulted in uncertainties in the semiconductor, LED, memory and automotive markets. While the Company anticipates long-term growth in semiconductor consumption, we observed trade-related adverse impacts in demand from China from the fourth quarter of fiscal 2018 through fiscal 2020, and such impacts may arise again in fiscal 2022 and/or beyond.

Net Revenue

Our net revenues for fiscal 2021 increased as compared to our net revenues for fiscal 2020. The increase in net revenue is primarily due to higher volume in both Capital Equipment and APS.

The following table reflects net revenue by business segment for fiscal 2021 and 2020:

Fiscal

(dollar amounts in thousands) 2021 2020 $ Change % Change

Net revenue % of total net revenue Net revenue % of total net revenue

Capital Equipment

For fiscal 2021, the higher Capital Equipment net revenue as compared to fiscal 2020 was driven by growing demand in the general semiconductor end market for consumer applications and 5G transition, automotive end market, memory end market and in the LED end market for both the adoption of the advanced LED display and sequential improvements for general lighting LED.

APS

For fiscal 2021, the higher APS net revenue as compared to fiscal 2020 was primarily due to higher volume in spares, services and bonding tools.

Table of Contents

Gross Profit Margin

The following table reflects gross profit as a percentage of net revenue by business segment for fiscal 2021 and 2020:

Fiscal

Capital Equipment

For fiscal 2021, the lower Capital Equipment gross profit margin as compared to fiscal 2020 was primarily driven by an increased gross margin in fiscal 2020 due to a warranty reserve revision, partially offset by more favorable product mix.

APS

For fiscal 2021, the higher APS gross profit margin as compared to fiscal 2020 was primarily driven by favorable product mix in spares and services.

Income from Operations

For fiscal 2021, total income from operations was higher as compared to fiscal 2020. This was primarily due to increased revenue in fiscal 2021, partially offset by higher operating expenses.

The following tables reflect income from operations by business segment for fiscal 2021 and 2020:

Fiscal

(dollar amounts in thousands) 2021 2020 $ Change % Change

Capital Equipment

For fiscal 2021, the higher Capital Equipment income from operations as compared to fiscal 2020 was primarily due to higher demand as explained under 'Net Revenue' above. This was partially offset by higher operating expenses as explained under 'Operating Expenses' below.

APS

For fiscal 2021, the higher APS income from operations as compared to fiscal 2020 was primarily due to higher demand as explained under 'Net Revenue' above. This was partially offset by higher operating expenses as explained under 'Operating Expenses' below.

Operating Expenses

The following table reflects operating expenses for fiscal 2021 and 2020:

Fiscal

(dollar amounts in thousands) 2021 2020 $ Change % Change

Table of Contents

Selling, General and Administrative (“SG&A”)

For fiscal 2021, the higher SG&A expenses as compared to fiscal 2020 were primarily due to $22.1 million higher staff costs related to an increase in incentive compensation and headcount, and $9.5 million in sales representative commissions.

Research and Development (“R&D”)

For fiscal 2021, the higher R&D expenses as compared to fiscal 2020 were primarily due to higher staff costs related to an increase in incentive compensation and headcount, and increased engineering services. These were partially offset by lower spending on prototype materials.

Interest Income and Expense

The following table reflects interest income and interest expense for fiscal 2021 and 2020:

Fiscal

(dollar amounts in thousands) 2021 2020 $ Change % Change

Interest income

For fiscal 2021, the lower interest income as compared to fiscal 2020 was primarily due to lower weighted average interest rates on cash, cash equivalents and short-term investments.

Interest expense

For fiscal 2021, the lower interest expense as compared to fiscal 2020 was primarily due to lower levels of average short-term debt outstanding. Please refer to Note 10: Debt and Other Obligations to our consolidated financial statements in Item 8 for a discussion of the Overdraft Facility.

Provision for Income Taxes

The following table reflects the provision for income taxes and the effective tax rate for fiscal 2021 and 2020:

Fiscal

(dollar amounts in thousands) 2021 2020 Change

For fiscal 2021, the effective tax rate differed from the U.S. federal statutory tax rate primarily due to tax benefits from tax incentives, foreign earnings subject to a lower statutory tax rate than the U.S. federal statutory tax rate, tax credits generated during the fiscal year, and the net release of valuation allowances recorded against certain loss and credit carryforwards, partially offset by tax expense related to deemed income and undistributed foreign earnings.

For fiscal 2020, the effective tax rate differed from the U.S. federal statutory tax rate primarily due to tax benefits from tax incentives, foreign earnings subject to a lower statutory tax rate than the U.S. federal statutory tax rate, and tax credits generated during the fiscal year net of a $3.5 million out of period adjustment, partially offset by tax expense related to deemed income, net increase of valuation allowances recorded against certain deferred tax assets, undistributed foreign earnings, and other non-deductible items. The $3.5 million out of period adjustment was to correct previously unrecorded income tax expense related to prior years jurisdictional adjustments. The Company determined that the out of period adjustment to the provision of income taxes and income taxes payable was not material to its fiscal 2020 or prior period consolidated financial statements.

Please refer to Note 15: Income Taxes to our consolidated financial statements in Item 8.

Table of Contents

LIQUIDITY AND CAPITAL RESOURCES

The following table reflects total cash, cash equivalents and short-term investments as of October 2, 2021 and October 3, 2020:

As of

(dollar amounts in thousands) October 2, 2021 October 3, 2020 Change

Percentage of total assets 46.2 % 50.3 %

The following table reflects summary Consolidated Statement of Cash Flow information for fiscal 2021 and 2020:

Fiscal

Net cash provided by operating activities $ 300,032 $ 94,412

Net cash used in investing activities (81,707) (125,957)

Net cash used in financing activities (44,258) (145,809)

Effect of exchange rate changes on cash and cash equivalents 594 1,297

Cash and cash equivalents, beginning of period 188,127 364,184

Fiscal 2021

Net cash provided by operating activities consisted of net income of $367.2 million, non-cash adjustments of $21.2 million and a net unfavorable change in operating assets and liabilities of $88.3 million.The net change in operating assets and liabilities was primarily driven by an increase in accounts and notes receivable of $221.9 million, inventories of $52.7 million, and prepaid expenses and other current assets of $4.6 million. This was partially offset by an increase in accounts payable and accrued expenses and other current liabilities of $182.0 million, and income tax payable of $7.7 million.

The increase in accounts payable and accrued expenses and other current liabilities was primarily due to higher purchases due to higher manufacturing activities. The increase in inventories was due to increased manufacturing activities in fiscal 2021 in response to increased sales. The increase in accounts receivable was due to higher sales.

The net cash used in investing activities was primarily due to net purchases of short-term investments of $35.0 million, the Uniqarta acquisition of $26.3 million, and capital expenditures of $22.8 million, partially offset by proceeds from the sale of an equity-method investment of $2.1 million.

The net cash used in financing activities was primarily due to dividend payments of $33.5 million, and common stock repurchases of $10.4 million.

Fiscal 2020

Net cash provided by operating activities consisted of net income of $52.3 million, non-cash adjustments of $34.9 million and a net favorable change in operating assets and liabilities of $7.2 million. The net change in operating assets and liabilities was primarily driven by an increase in accounts payable and accrued expenses and other current liabilities of $38.1 million. This was partially offset by an increase in inventories of $26.2 million, and prepaid expenses and other current assets of $3.6 million, and an increase in accounts and notes receivable of $1.9 million.

The increase in accounts payable and accrued expenses and other current liabilities was primarily due to higher purchases due to higher manufacturing activities. The increase in inventories was due to increased manufacturing activities in fiscal 2020 in response to increased sales. The increase in accounts receivable was due to higher sales.

The net cash used in investing activities was primarily due to net purchases of short-term investments of $113.0 million, capital expenditures of $11.7 million and an equity investment of $1.3 million.

The net cash used in financing activities was primarily due to a net repayment of short-term debt of $60.9 million, common stock repurchases of $54.5 million, and dividend payments of $30.2 million.

Table of Contents

Fiscal 2022 Liquidity and Capital Resource Outlook

We expect our fiscal 2022 capital expenditures to be between $38.0 million and $42.0 million. The actual amounts for fiscal 2022 will vary depending on market conditions. Expenditures are anticipated to be primarily used for R&D projects, enhancements to our manufacturing operations, improvements to our information technology security, implementation of an enterprise resource planning system and leasehold improvements for our facilities.

We believe that our existing cash and investments and anticipated cash flows from operations will be sufficient to meet our liquidity and capital requirements for at least the next twelve months from the date of filing. Our liquidity is affected by many factors, some based on normal operations of our business and others related to global economic conditions and industry uncertainties, which we cannot predict. We also cannot predict economic conditions and industry downturns or the timing, strength or duration of recoveries. We intend to continue to use our cash for working capital needs and for general corporate purposes.

We may seek, as we believe appropriate, additional debt or equity financing which would provide capital for corporate purposes, working capital funding, additional liquidity needs or to fund future growth opportunities, including possible acquisitions and investments. The timing and amount of potential capital requirements cannot be determined at this time and will depend on a number of factors, including our actual and projected demand for our products, semiconductor and semiconductor capital equipment industry conditions, competitive factors, and the condition of financial markets.

As of October 2, 2021 and October 3, 2020, approximately $724.5 million and $492.0 million of cash, cash equivalents, and short-term investments were held by the Company's foreign subsidiaries, respectively, with a large portion of the cash amounts expected to be available for use in the U.S. without incurring additional U.S. income tax.

The Company’s international operations and capital requirements are funded primarily by cash generated by foreign operating activities and cash held by foreign subsidiaries. Most of the Company's operations and liquidity needs are outside the U.S. In fiscal 2021, the Company’s U.S. operations and capital requirements have been funded primarily by cash generated from U.S. operating activities, repatriation of cash generated by foreign operating activities, and by a Facility Agreement with MUFG Bank, Ltd. In the future, the Company may repatriate additional cash held by foreign subsidiaries that has already been subject to U.S. tax. We believe these future repatriations of cash and our U.S. sources of cash and liquidity are sufficient to meet our other business needs in the U.S. for the foreseeable future including funding of U.S. operations, capital expenditures, repayment of outstanding balances under the Facility Agreement with MUFG Bank, Ltd., dividend program, and the share repurchase program as approved by the Board of Directors. Should the Company’s U.S. cash needs exceed its funds generated by U.S. and foreign operations due to changing business conditions or transactions outside the ordinary course, such as acquisitions of large capital assets, businesses or any other capital appropriation in the U.S., the Company may require additional financing in the U.S. In this event, the Company could seek U.S. borrowing alternatives.

Share Repurchase Program

On August 15, 2017, the Company's Board of Directors authorized the Program to repurchase up to $100 million of the Company’s common stock on or before August 1, 2020. In 2018 and 2019, the Board of Directors increased the share repurchase authorization under the Program to $200 million and $300 million, respectively. On July 3, 2020, the Board of Directors increased the share repurchase authorization under the Company's existing share repurchase program by an additional $100 million to $400 million, and extended its duration through August 1, 2022. The Company has entered into a written trading plan under Rule 10b5-1 of the Exchange Act to facilitate repurchases under the Program. The Program may be suspended or discontinued at any time and is funded using the Company's available cash, cash equivalents and short-term investments. Under the Program, shares may be repurchased through open market and/or privately negotiated transactions at prices deemed appropriate by management. The timing and amount of repurchase transactions under the Program depend on market conditions as well as corporate and regulatory considerations.

During the fiscal year ended October 2, 2021, the Company repurchased a total of approximately 215.0 thousand shares of common stock at a cost of approximately $10.2 million. As of October 2, 2021, our remaining share repurchase authorization under the Program was approximately $132.0 million.

Dividends

On August 26, 2021, May 28, 2021, March 5, 2021 and December 10, 2020, the Board of Directors declared a quarterly dividend $0.14 per share of common stock. During the fiscal year ended October 2, 2021, the Company declared dividends of $0.56 per share of common stock. The declaration of any future cash dividend is at the discretion of the Board of Directors and will depend on the Company's financial condition, results of operations, capital requirements, business conditions and other factors, as well as a determination that such dividends are in the best interests of the Company's stockholders.

Table of Contents

Other Obligations and Contingent Payments

In accordance with U.S. generally accepted accounting principles, certain obligations and commitments as of October 2, 2021 are appropriately not included in the Consolidated Balance Sheets and Statements of Operations in this Form 10-K. However, because these obligations and commitments are entered into in the normal course of business and because they may have a material impact on our liquidity, we have disclosed them in the table below.

Additionally, as of October 2, 2021, the Company had deferred tax liabilities of $32.8 million and unrecognized tax benefit recorded within the income tax payable for uncertain tax positions of $15.0 million, including related accrued interest of $1.7 million. These amounts are not included in the contractual obligation table below because we are unable to reasonably estimate the timing of these payments at this time.

The following table presents certain payments due by the Company under contractual obligations with minimum firm commitments as of October 2, 2021:

Payments due in

(in thousands) Total Less than 1 year 1 - 3 years 3 - 5 years More than 5 years

(1)We order inventory components in the normal course of our business. A portion of these orders are non-cancellable and a portion may have varying penalties and charges in the event of cancellation.

(2)Associated with the U.S. one-time transition tax on certain earnings and profits of our foreign subsidiaries in relation to the U.S. Tax Cuts and Jobs Act of 2017.

Off-Balance Sheet Arrangements

Credit Facilities

On February 15, 2019, the Company entered into a Facility Letter and Overdraft Agreement (collectively, the “Facility Agreements”) with MUFG Bank, Ltd., Singapore Branch (the “Bank”). The Facility Agreements provide the Company and one of its subsidiaries with an overdraft facility of up to $150.0 million (the “Overdraft Facility”) for general corporate purposes. Amounts outstanding under the Overdraft Facility, including interest, are payable upon thirty days written demand by the Bank. Interest on the Overdraft Facility is calculated on a daily basis, and the applicable interest rate is calculated at the overnight U.S. Dollar LIBOR rate plus a margin of 1.5% per annum. The Overdraft Facility is an unsecured facility per the terms of the Facility Agreements. The Facility Agreements contain customary non-financial covenants, including, without limitation, covenants that restrict the Company’s ability to sell or dispose of its assets, cease owning at least 51% of two of its subsidiaries (the "Subsidiaries"), or encumber its assets with material security interests (including any pledge of monies in the Subsidiaries' cash deposit account with the Bank). The Facility Agreements also contain typical events of default, including, without limitation, non-payment of financial obligations when due, cross defaults to other material indebtedness of the Company and any breach of a representation or warranty under the Facility Agreements. As of October 2, 2021, there were no outstanding amounts under the Overdraft Facility.

As of October 2, 2021, other than the bank guarantee disclosed in Note 10, we did not have any other off-balance sheet arrangements, such as contingent interests or obligations associated with variable interest entities.

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Interest Rate Risk

Our available-for-sale securities, if applicable, may consist of short-term investments in highly rated debt instruments of the U.S. Government and its agencies, financial institutions, and corporations. We continually monitor our exposure to changes in interest rates and credit ratings of issuers with respect to any available-for-sale securities and target an average life to maturity of less than 18 months. Accordingly, we believe that the effects to us of changes in interest rates and credit ratings of issuers are limited and would not have a material impact on our financial condition or results of operations.

Table of Contents

Foreign Currency Risk

Our international operations are exposed to changes in foreign currency exchange rates due to transactions denominated in currencies other than the location's functional currency. Our international operations are also exposed to foreign currency fluctuations that impact the remeasurement of net monetary assets of those operations whose functional currency, the U.S. dollar, differs from their respective local currencies, most notably in Israel, Singapore and Switzerland. Our U.S. operations also have foreign currency exposure due to net monetary assets denominated in currencies other than the U.S. dollar. In addition to net monetary remeasurement, we have exposures related to the translation of subsidiary financial statements from their functional currency, the local currency, into its reporting currency, the U.S. dollar, most notably in the Netherlands, China, Taiwan, Japan and Germany.

Based on our foreign currency exposure as of October 2, 2021, a 10.0% fluctuation could impact our financial position, results of operations or cash flows by $2.0 to $3.0 million. Our attempts to hedge against these risks may not be successful and may result in a material adverse impact on our financial results and cash flow.

We enter into foreign exchange forward contracts to hedge a portion of our forecasted foreign currency-denominated expenses in the normal course of business and, accordingly, they are not speculative in nature. These instruments generally mature within twelve months. We have foreign exchange forward contracts with a notional amount of $57.7 million outstanding as of October 2, 2021.

Table of Contents

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The consolidated financial statements of Kulicke and Soffa Industries, Inc. listed in the index appearing under Item 15(a)(1) herein are filed as part of this Report under this Item 8.

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Shareholders of Kulicke and Soffa Industries, Inc.

Opinions on the Financial Statements and Internal Control over Financial Reporting

We have audited the accompanying consolidated balance sheets of Kulicke and Soffa Industries, Inc. and its subsidiaries(the “Company”) as of October 2, 2021and October 3, 2020,and the related consolidated statements of operations, of comprehensive income, of changes in shareholders’ equity and of cash flowsfor each of the three years in the period ended October 2, 2021, including the related notes and schedule of valuation and qualifying accounts for each of the three years in the period ended October 2, 2021 appearing under Item 15(a)(2) (collectively referred to as the “consolidated financial statements”).We also have audited the Company's internal control over financial reporting as of October 2, 2021, based on criteria established in Internal Control - Integrated Framework(2013)issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

In our opinion, the consolidatedfinancial statements referred to above present fairly, in all material respects, the financial position of the Company as of October 2, 2021 and October 3, 2020, and the results of itsoperations and itscash flows for each of the three years in the period ended October 2, 2021 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of October 2, 2021, based on criteria established in Internal Control - Integrated Framework(2013)issued by the COSO.

Basis for Opinions

The Company's management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control Over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on the Company’s consolidatedfinancial statements and on the Company's internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidatedfinancial statements are free of material misstatement, whether due to error or fraud, and whether effective internal control over financial reporting was maintained in all material respects.

Our audits of the consolidatedfinancial statements included performing procedures to assess the risks of material misstatement of the consolidatedfinancial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidatedfinancial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidatedfinancial statements. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and

Table of Contents

expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Critical Audit Matters

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that (i) relates to accounts or disclosures that are material to theconsolidated financial statements and (ii) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on theconsolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Realizability of deferred income taxes

As described in Notes 1 and 15 to the consolidated financial statements, as of October 2, 2021, the Company's gross deferred tax assets balance of $45.0 million was partially offset by valuation allowances of $34.1 million. The net release of valuation allowances charged to the consolidated statement of operations during the year was $11.6 million. As disclosed, management recorded a valuation allowance to reduce its deferred tax assets to the amount expected, on a more likely than not basis, to be realized. Management has considered future taxable income in assessing the need for the valuation allowance.

The principal considerations for our determination that performing procedures relating to the realizability of deferred tax assets is a critical audit matter are (i) our assessment that this is an area of significant judgment by management in determining the realizability of deferred tax assets; and (ii) a high degree of auditor judgment, subjectivity, and effort in performing procedures to evaluate management's forecasted future taxable income for certain foreign jurisdictions.

Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements.These procedures included testing the effectiveness of controls relating to the realizability of deferred tax assets, including controls over management's process for developing forecasted future taxable income for certain foreign jurisdictions. These procedures also included, among others, testing management's process for determining the realizability of deferred tax assets for certain foreign jurisdictions, and evaluating management's forecasted future taxable income for certain foreign jurisdictions, which considered (i) current and past results; (ii) consistency with external market and industry data; (iii) availability of objectively verifiable data; (iv) a comparison of the prior year estimates to actual results in the current year; and (v) whether these forecasts were consistent with evidence obtained in other areas of the audit.

/s/ PricewaterhouseCoopers LLP

Singapore

November 18, 2021

We have served as the Company’s auditor since 2011.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands, except per share amount)

As of

ASSETS

Current assets:

Prepaid expenses and other current assets 23,586 19,620

LIABILITIES AND SHAREHOLDERS' EQUITY

Current liabilities:

Accrued expenses and other current liabilities 161,570 76,762

Commitments and contingent liabilities (Note 17)

SHAREHOLDERS' EQUITY:

Preferred stock, without par value:

Authorized 5,000 shares; issued - none $ — $ —

Common stock, no par value:

Accumulated other comprehensive loss (3,022) (2,521)

The accompanying notes are an integral part of these consolidated financial statements.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except per share data)

Fiscal

Share of results of equity-method investee, net of tax 94 36 124

Net income per share:

Weighted average shares outstanding:

The accompanying notes are an integral part of these consolidated financial statements.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(in thousands)

Fiscal

Other comprehensive income / (loss):

Foreign currency translation adjustment 672 7,755 (6,534)

Unrecognized actuarial (loss) / gain on pension plan, net of tax — (1,490) 22

Derivatives designated as hedging instruments:

Unrealized gain / (loss) on derivative instruments, net of tax 24 358 (741)

Total other comprehensive (loss) / income (501) 7,419 (6,038)

The accompanying notes are an integral part of these consolidated financial statements.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY

(in thousands)

Shares Amount

Issuance of stock for services rendered 37 834 — — — 834

Exercise of stock options 2 14 — — — 14

Issuance of shares for equity-based compensation 667 — — — — —

Cumulative effect of accounting changes — — — 534 — 534

Components of comprehensive income:

Other comprehensive loss — — — — (6,038) (6,038)

Issuance of stock for services rendered 37 491 359 — — 850

Issuance of shares for equity-based compensation 834 (9,037) 9,037 — — —

Cumulative effect of accounting changes — — — (769) — (769)

Components of comprehensive income:

Other comprehensive loss — — — — 7,419 7,419

Issuance of stock for services rendered 23 616 202 — — 818

Issuance of shares for equity-based compensation 565 (4,385) 4,385 — — —

Components of comprehensive income:

Other comprehensive gain — — — — (501) (501)

The accompanying notes are an integral part of these consolidated financial statements.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

Fiscal

CASH FLOWS FROM OPERATING ACTIVITIES:

Adjustment for doubtful accounts (248) 371 212

Change in the estimation of warranty reserve — (5,417) —

Loss on disposal of property, plant and equipment 259 953 20

Gain on disposal of equity-method investments (1,046) — —

Unrealized foreign currency translation (378) 874 (3,325)

Share of results of equity-method investee 94 36 124

Changes in operating assets and liabilities:

Prepaid expenses and other current assets (4,573) (3,561) (490)

CASH FLOWS FROM INVESTING ACTIVITIES:

Acquisition of business, net of cash acquired (26,338) — —

Proceeds from sales of property, plant and equipment 291 50 210

Purchase of equity investments — (1,288) (5,000)

Disposal of equity-method investments 2,115 — —

CASH FLOWS FROM FINANCING ACTIVITIES:

Proceeds from exercise of common stock options — — 14

Payment for finance leases (379) (123) —

Effect of exchange rate changes on cash and cash equivalents 594 1,297 919

CASH PAID FOR:

The accompanying notes are an integral part of these consolidated financial statements.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

NOTE 1: BASIS OF PRESENTATION

These consolidated financial statements include the accounts of Kulicke and Soffa Industries, Inc. and its subsidiaries (the “Company”), with appropriate elimination of intercompany balances and transactions.

Fiscal Year

Each of the Company's first three fiscal quarters ends on the Saturday that is 13 weeks after the end of the immediately preceding fiscal quarter. The fourth quarter of each fiscal year ends on the Saturday closest to September 30. In fiscal years consisting of 53 weeks, the fourth quarter will consist of 14 weeks. The 2021, 2020, and 2019 fiscal years ended on October 2, 2021, October 3, 2020 and September 28, 2019, respectively.

Nature of Business

The Company designs, manufactures and sells capital equipment and tools as well as services, maintains, repairs and upgrades equipment, all used to assemble semiconductor devices. The Company's operating results depend upon the capital and operating expenditures of semiconductor device manufacturers, integrated device manufacturers, outsourced semiconductor assembly and test providers (“OSATs”), and other electronics manufacturers, including automotive electronics suppliers, worldwide which, in turn, depend on the current and anticipated market demand for semiconductors and products utilizing semiconductors. The semiconductor industry is highly volatile and experiences downturns and slowdowns which can have a severe negative effect on the semiconductor industry's demand for semiconductor capital equipment, including assembly equipment manufactured and sold by the Company and, to a lesser extent, tools, including those sold by the Company. These downturns and slowdowns have in the past adversely affected the Company's operating results. The Company believes such volatility will continue to characterize the industry and the Company's operations in the future.

Use of Estimates

The preparation of consolidated financial statements requires management to make assumptions, estimates and judgments that affect the reported amounts of assets and liabilities, net revenue and expenses during the reporting periods, and disclosures of contingent assets and liabilities as of the date of the consolidated financial statements. On an ongoing basis, management evaluates estimates, including but not limited to, those related to accounts receivable, reserves for excess and obsolete inventory, carrying value and lives of fixed assets, goodwill and intangible assets, the valuation estimates and assessment of impairment and observable price adjustments, income taxes, equity-based compensation expense, and warranties. Management bases its estimates on historical experience and on various other assumptions believed to be reasonable. As a result, management makes judgments regarding the carrying values of the Company's assets and liabilities that are not readily apparent from other sources. Authoritative pronouncements, historical experience and assumptions are used as the basis for making estimates, and on an ongoing basis, management evaluates these estimates. Actual results may differ from these estimates.

Due to the coronavirus (“COVID-19”) pandemic, there has been uncertainty and disruption in the global economy and financial markets. The Company is not aware of any specific event or circumstance that would require an update to its estimates or judgments or a revision of the carrying value of its assets or liabilities as of October 2, 2021. While there was no material impact to our consolidated financial statements as of and for the year ended October 2, 2021, these estimates may change, as new events occur and additional information is obtained, as well as other factors related to COVID-19 that could result in material impacts to our consolidated financial statements in future reporting periods.

The Company reviews its warranty reserve balances as part of its ongoing policy review. At the start of fiscal 2020, the Company determined there was a need to obtain granular data given uncertainty in sales demand. Accordingly, the Company commenced the collection of granular data over the four fiscal quarters in 2020 to establish a more precise estimate of its warranty reserve. This collection was finalized and the information incorporated in the fourth quarter of fiscal 2020. This resulted in a decrease to the reserve for warranty and an increase in net income by $5.4 million for the fiscal year 2020, as well as an increase to net income per share, basic and diluted, by $0.09 and $0.09, respectively. For further information on warranty reserve, see Notes 14 and 17 below.

Vulnerability to Certain Concentrations

Financial instruments which may subject the Company to concentrations of credit risk as of October 2, 2021 and October 3, 2020 consisted primarily of trade receivables. The Company manages credit risk associated with investments by investing its excess cash in highly rated debt instruments of the U.S. government and its agencies, financial institutions, and corporations. The Company has established investment guidelines relative to diversification and maturities designed to maintain safety and liquidity. These guidelines are periodically reviewed and modified as appropriate. The Company does not have any exposure to sub-prime financial instruments or auction rate securities.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - (Continued)

The Company's trade receivables result primarily from the sale of semiconductor equipment, related accessories and replacement parts, and tools to a relatively small number of large manufacturers in a highly concentrated industry. Write-offs of uncollectible accounts have historically not been material. The Company actively monitors its customers' financial strength to reduce the risk of loss, including as a result of COVID-19.

The Company's products are complex and require raw materials, components and subassemblies having a high degree of reliability, accuracy and performance. The Company relies on subcontractors to manufacture many of these components and subassemblies and it relies on sole source suppliers for some important components and raw material inventory.

Foreign Currency Translation and Remeasurement

The majority of the Company's business is transacted in U.S. dollars; however, the functional currencies of some of the Company's subsidiaries are their local currencies. In accordance with ASC No. 830, Foreign Currency Matters (“ASC 830”), for a subsidiary of the Company that has a functional currency other than the U.S. dollar, gains and losses resulting from the translation of the functional currency into U.S. dollars for financial statement presentation are not included in determining net income, but are accumulated in the cumulative translation adjustment account as a separate component of shareholders' equity (accumulated other comprehensive income / (loss)). The tax effect of currency translation adjustments related to unremitted foreign earnings no longer deemed to be indefinitely reinvested outside the U.S. is reflected in the determination of the Company's net income or other comprehensive income ("OCI"). Gains and losses resulting from foreign currency transactions are included in the determination of net income.

The Company's operations are exposed to changes in foreign currency exchange rates due to transactions denominated in currencies other than the location's functional currency. The Company is also exposed to foreign currency fluctuations that impact the remeasurement of net monetary assets of those operations whose functional currency, the U.S. dollar, differs from their respective local currencies, most notably in Israel, Singapore and Switzerland. In addition to net monetary remeasurement, the Company has exposures related to the translation of subsidiary financial statements from their functional currency, the local currency, into its reporting currency, the U.S. dollar, most notably in the Netherlands, China, Taiwan, Japan and Germany. The Company's U.S. operations also have foreign currency exposure due to net monetary assets denominated in currencies other than the U.S. dollar.

Derivative Financial Instruments

The Company’s primary objective for holding derivative financial instruments is to manage the fluctuation in foreign exchange rates and accordingly is not speculative in nature. The Company’s international operations are exposed to changes in foreign exchange rates as described above. The Company has established a program to monitor the forecasted transaction currency risk to protect against foreign exchange rate volatility. Generally, the Company uses foreign exchange forward contracts in these hedging programs. These instruments, which have maturities of up to twelve months, are recorded at fair value and are included in prepaid expenses and other current assets, or accrued expenses and other current liabilities.

Our accounting policy for derivative financial instruments is based on whether they meet the criteria for designation as a cash flow hedge. A designated hedge with exposure to variability in the functional currency equivalent of the future foreign currency cash flows of a forecasted transaction is referred to as a cash flow hedge. The criteria for designating a derivative as a cash flow hedge include the assessment of the instrument’s effectiveness in risk reduction, matching of the derivative instrument to its underlying transaction, and the assessment of the probability that the underlying transaction will occur. For derivatives with cash flow hedge accounting designation, we report the after-tax gain / (loss) from the effective portion of the hedge as a component of accumulated other comprehensive income / (loss) and reclassify it into earnings in the same period in which the hedged transaction affects earnings and in the same line item on the consolidated statement of operations as the impact of the hedged transaction. Derivatives that we designate as cash flow hedges are classified in the consolidated statement of cash flows in the same section as the underlying item, primarily within cash flows from operating activities.

The hedge effectiveness of these derivative instruments is evaluated by comparing the cumulative change in the fair value of the hedge contract with the cumulative change in the fair value of the forecasted cash flows of the hedged item.

If a cash flow hedge is discontinued because it is no longer probable that the original hedged transaction will occur as previously anticipated, the cumulative unrealized gain or loss on the related derivative is reclassified from accumulated other comprehensive income / (loss) into earnings. Subsequent gain / (loss) on the related derivative instrument is recognized into earnings in each period until the instrument matures, is terminated, is re-designated as a qualified cash flow hedge, or is sold. Ineffective portions of cash flow hedges, as well as amounts excluded from the assessment of effectiveness, are recognized in earnings.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - (Continued)

Cash Equivalents

The Company considers all highly liquid investments with original maturities of three months or less when purchased to be cash equivalents. Cash equivalents are measured at fair value based on Level 1 measurement, or quoted market prices, as defined by ASC No. 820, Fair Value Measurements and Disclosures.

Equity Investments

The Company invests in equity securities in companies to promote business and strategic objectives. Equity investments are measured and recorded as follows:

•Equity method investments are equity securities in investees that provide the Company with the ability to exercise significant influence in which it lacks a controlling financial interest. Our proportionate share of the income or loss is recognized on a one-quarter lag and is recorded as share of results of equity-method investee, net of tax.

•Non-marketable equity securities are equity securities without readily determinable fair value that are measured and recorded using a measurement alternative that measures the securities at cost minus impairment, if any, plus or minus changes resulting from qualifying observable price changes.

Allowance for Doubtful Accounts

The Company maintains allowances for doubtful accounts for estimated losses resulting from its customers' failure to make required payments. If the financial condition of the Company's customers were to deteriorate, resulting in an impairment of their ability to make payments, including as a result of COVID-19, additional allowances may be required. If global or regional economic conditions deteriorate or political conditions were to change in some of the countries where the Company does business, including as a result of COVID-19, it could have a significant impact on the results of operations, and the Company's ability to realize the full value of its accounts receivable.

Inventories

Inventories are stated at the lower of cost (on a first-in, first-out basis) or net realizable value. The Company generally provides reserves for obsolete inventory and for inventory considered to be in excess of demand. Demand is generally defined as 18 months forecasted future consumption for equipment, 24 months forecasted future consumption for spare parts, and 12 months forecasted future consumption for tools. Forecasted consumption is based upon internal projections, historical sales volumes, customer order activity and a review of consumable inventory levels at customers' facilities. The Company communicates forecasts of its future consumption to its suppliers and adjusts commitments to those suppliers accordingly. If required, the Company reserves the difference between the carrying value of its inventory and the lower of cost or net realizable value, based upon projections about future consumption, and market conditions. If actual market conditions are less favorable than projections, additional inventory reserves may be required.

Property, Plant and Equipment

Property, plant and equipment are carried at cost. The cost of additions and those improvements which increase the capacity or lengthen the useful lives of assets are capitalized while repair and maintenance costs are expensed as incurred. Depreciation and amortization are provided on a straight-line basis over the estimated useful lives as follows: buildings 25 years; machinery, equipment, furniture and fittings 3 to 10 years; toolings 1 year; and leasehold improvements are based on the shorter of the life of lease or life of asset. Purchased computer software costs related to business and financial systems are amortized over a five-year period on a straight-line basis. Land is not depreciated.

Valuation of Long-Lived Assets

In accordance with ASC No. 360, Property, Plant & Equipment ("ASC 360"), the Company's definite lived intangible assets and property, plant and equipment are tested for impairment based on undiscounted cash flows when triggering events occur, and if impaired, written-down to fair value based on either discounted cash flows or appraised values. ASC 360 also provides a single accounting model for long-lived assets to be disposed of by sale and establishes additional criteria that would have to be met to classify an asset as held for sale. The carrying amount of an asset or asset group is not recoverable to the extent it exceeds the sum of the undiscounted cash flows expected to result from the use and eventual disposition of the asset or asset group. Estimates of future cash flows used to test the recoverability of a long-lived asset or asset group must incorporate the entity's own assumptions about its use of the asset or asset group and must factor in all available evidence.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - (Continued)

ASC 360 requires that long-lived assets be tested for recoverability whenever events or changes in circumstances indicate that their carrying amount may not be recoverable. Such events include significant under-performance relative to historical internal forecasts or projected future operating results; significant changes in the manner of use of the assets; significant negative industry or economic trends; or significant changes in market capitalization. During the fiscal years ended October 2, 2021 and October 3, 2020, no "triggering" events occurred.

Accounting for Impairment of Goodwill

ASC No. 350, Intangibles - Goodwill and Other requires goodwill and other intangible assets with indefinite lives to be reviewed for impairment annually, or more frequently if circumstances indicate a possible impairment. We assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying value. If, after assessing the qualitative factors, a company determines that it is not more likely than not that the fair value of a reporting unit is less than its carrying value, then performing the impairment test is unnecessary. However, if a company concludes otherwise, then it is required to perform the goodwill impairment test. The Company's impairment test is performed by comparing the fair value of a reporting unit with its carrying value, and determining if the carrying amount exceeds its fair value.

Impairment assessments inherently involve judgment as to the assumptions made about the expected future cash flows and the impact of market conditions on those assumptions. Future events and changing market conditions may impact the assumptions as to prices, costs, growth rates or other factors that may result in changes in the estimates of future cash flows. Although the Company believes the assumptions that it has used in testing for impairment are reasonable, significant changes in any one of the assumptions could produce a significantly different result. Indicators of potential impairment, including significant and unforeseen customer losses, a significant adverse change in legal factors or in the business climate, a significant adverse action or assessment by a regulator, a significant stock price decline or unanticipated competition may lead the Company to perform interim goodwill impairment assessments.

For further information on goodwill and other intangible assets, see Note 4 below.

Revenue Recognition

Our business is subject to contingencies related to customer orders, including:

•Right of Return: A large portion of our revenue comes from the sale of equipment used in the semiconductor assembly process. Other product sales relate to consumable products, which are sold in high-volume quantities, and are generally maintained at low stock levels at the customers' facility. Customer returns have historically represented a very small percentage of customer sales on an annual basis.

Table of Contents

KULICKE AND SOFFA INDUSTRIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - (Continued)

acceptance are satisfied at our facility prior to shipment, the revenue for the equipment will be recognized upon shipment. If the terms of acceptance are satisfied at our customers' facilities, the revenue for the equipment will not be recognized until acceptance, which is typically obtained after installation and testing, is received from the customer.

Service revenue is generally recognized over time as the services are performed. For fiscal 2021 and 2020, the service revenue is not material.

KLIC US Equity

KLIC · 10-K · period ended 2021-10-02

Item 1A. RISK FACTORS

Item 1B. UNRESOLVED STAFF COMMENTS

Item 2. PROPERTIES

Item 3.LEGAL PROCEEDINGS

Item 4.MINE SAFETY DISCLOSURES

Item 5.MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Item 6. [Reserved]

Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

KLIC US Equity☆

KLIC · 10-K · period ended 2021-10-02

Item 1A. RISK FACTORS

Item 1B. UNRESOLVED STAFF COMMENTS

Item 2. PROPERTIES

Item 3.LEGAL PROCEEDINGS

Item 4.MINE SAFETY DISCLOSURES

Item 5.MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Item 6. [Reserved]

Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

KLIC US Equity