Item 1A. Risk Factors.
Each reader should carefully consider the risks, uncertainties and other factors described below, in addition to the other information set forth in this report, because they could materially and adversely affect the Company’s business, operating results, financial condition, cash flows, prospects, and the value of an investment in IS&S common stock.
Summary
An investment in our common stock involves various risks, including risks related to the items listed below. However, you are urged to carefully consider all of the matters discussed in this Part I, Item 1A of this Report under the caption “Risk Factors” (not just those discussed in this summary) in considering our business and prospects.
IS&S-Specific Risk Factors
The Company faces risks relating to:
15
Table of Contents
● the possibility that IS&S may lose one or more key customers;
● the self-insured portion of IS&S’ employee medical insurance program;
● our lack of substantial backlog;
● the ability to service the international market; and
● intense competition with key competitors.
General Risk Factors
The Company faces risks relating to:
● the ongoing COVID-19 pandemic;
● the ability to respond to technological change;
● delays in receiving components from third-party suppliers;
● challenges associated with the complexity of our products;
● our ability to protect our intellectual property rights;
● failure to retain/recruit key personnel;
● succession planning;
● variations in our revenue and operating results over time;
● a cyber security incident;
● potential litigation;
● the costs of compliance with present and future laws and regulations;
● the efficacy of our internal control over financial reporting.
IS&S-Specific Risk Factors
Growth of the Company’s customer base could be limited by delays or difficulties in completing development and introduction of planned products or product enhancements. If IS&S fails to enhance existing products, or to develop and achieve market acceptance for flat panel displays, flight management systems, autothrottle technology and other new products that meet customer requirements, its business, reputation and statements of income may be affected adversely.
Currently, IS&S spends a large portion of its R&D efforts in developing and marketing the FPDS, FMS, ThrustSense® Autothrottle and complementary products. The Company’s ability to grow and diversify its operations through introduction and sale of new products is dependent upon its continued success in product development and engineering activities, its sales and marketing efforts, and its ability to obtain necessary regulatory approvals to sell such products. Sales growth will depend in part on market acceptance of and demand for the FPDS, FMS, ThrustSense® Autothrottle and future products. IS&S cannot be certain that it will be able to develop, introduce or market its FPDS, FMS, ThrustSense® Autothrottle or other new products or product enhancements in a timely or cost-effective manner, or that any new products or product enhancements will receive market acceptance or necessary regulatory approval. In addition, the Company’s business is dependent upon maintaining its reputation and relationships with existing customers. If the Company’s performance does not meet its customers’ expectations, the Company’s reputation and its relationships could be damaged, which may have a material adverse impact on the Company’s business and statements of income, including reductions in sales.
In seeking new customers, the Company may have difficulty in displacing the products of incumbent competitors. IS&S cannot be assured that potential customers will accept its products or that existing customers will not abandon them.
16
Table of Contents
Contracts can be terminated by many of the Company’s customers at any time and, therefore, may not result in sales.
IS&S’s contracts, including contracts with government agencies, includes various terms and conditions that impose certain requirements on IS&S, including the ability of the government agency or general contractor to alter the price, quantity or delivery schedule of the products. Additionally, government agencies and general contractors typically retain the right to terminate the contract at any time at their convenience. Upon alteration or termination of these contracts, IS&S is entitled typically to an equitable adjustment to the contract price so that it would be compensated for delivered items and allowable costs incurred. However, because these contracts can be terminated for convenience, the Company cannot be assured that its backlog will result in sales.
The Company enters into fixed-price contracts or service arrangements to perform specified design and EDC services related to its products that could subject IS&S to losses in the event the Company incurs cost overruns on its projects.
During fiscal year 2022, approximately 2% percent of the Company’s total sales were from fixed-price EDC arrangements with customers to perform specified design and EDC services related to its products. These arrangements allow IS&S to benefit by recovering some of its product development costs, but it carries the risk of potential cost overruns. If the Company’s initial cost estimates are incorrect, it can incur potentially large one time charges and losses on these contracts. These EDC arrangements can expose the Company to potential losses because the customer may compel IS&S to complete a project or, in the event of a termination for default, pay the incremental cost of its replacement by another provider. Because some of these projects involve new technologies and applications, and can last for more than a year, unforeseen events such as technological difficulties, fluctuations in the price of raw materials, problems with subcontractors, and cost overruns can result in the contractual price becoming less favorable or even unprofitable to IS&S over time. Furthermore, if the Company does not meet project deadlines or if its products do not meet customer specifications, it may need to renegotiate contracts on less favorable terms, be forced to pay penalties or liquidated damages, or suffer losses if the customer exercises its right to terminate. The Company’s results of operations are dependent on its ability to maximize earnings from the EDC service arrangements. Lower earnings caused by cost overruns could have a negative impact on the Company’s financial condition, operating results, and cash flows.
A portion of IS&S sales come from government contracts, which could be adversely affected by continued high U.S. federal budget deficits. Government contracts are also subject to special risks as a result of the U.S. government’s audit practices.
A portion of IS&S sales has been, and is expected to continue to be, from defense contractors or government agencies in connection with government aircraft retrofit or OEM contracts. Sales to government contractors and government agencies could decline as a result of DoD spending cuts and general budgetary constraints which may become more severe as the federal budget deficit remains high.
In addition, the U.S. government regularly conducts investigations, inquiries and audits into its suppliers’ compliance with procurement regulations and performance under the relevant government contracts. If an investigation reveals or an audit finds that the Company violated applicable law or regulations, its government contracts could be terminated and it could be restricted from future procurement activities. Moreover, if an investigation, inquiry or audit finds that the Company acted improperly or was involved in illegal activities, the Company could be subject to civil penalties, criminal penalties, and administrative sanctions. As a result, the Company’s reputation could be harmed even if the allegations were later determined to be false.
Reductions in government expenditures could adversely affect IS&S business.
Reductions in funding of the DoD and U.S. defense spending could have significant consequences to the Company’s business and industry. While the full impact of such reductions is not determinable, the impact of any resulting reductions in defense appropriations, and/or reductions in U.S. defense spending could result in delays in procurement of products and services due to lack of funding, and negatively affect the IS&S’s revenues, financial condition and results of operations.
17
Table of Contents
The loss of a key customer or a significant deterioration in the financial condition of a key customer could have a material adverse effect on the Company’s results of operations.
The Company’s revenue is concentrated with a limited number of customers. During fiscal year 2022 IS&S derived 58% of revenue from the top five customers. IS&S expects a relatively small number of customers to account for a majority of its revenues for the foreseeable future. As a result of the concentrated customer base, a loss of one or more of these customers or a dispute or litigation with one of these key customers could affect adversely its revenue and results of operations. The Company monitors and evaluates the credit status of its customers and attempts to adjust sales terms as appropriate. Despite these efforts, a significant deterioration in the financial condition or bankruptcy filing of a key customer could affect adversely the Company’s business, results of operations, and financial condition.
In addition, the Company is subject to credit risk associated with the concentration of accounts receivable from its key customers. If any of the Company’s top customers were to become bankrupt or insolvent or otherwise were unable to pay for the products and services provided by the Company, including as a result of the impact of the COVID-19 pandemic on their businesses or financial conditions, then the Company may incur significant write-offs of accounts receivable, incur other impairment charges or result in a significant loss of expected revenues, which may have a material adverse effect on the Company’s results of operations.
We self-insure a significant portion of our employee medical insurance program, which may expose us to unpredictable costs and negatively affect our financial performance.
We self-insure a significant portion of our employee medical insurance program and related benefit claims. The estimated liability for the self-funded portion of our insurance program is determined actuarially, based on claims filed historically, demographic factors and an estimate of claims incurred but not yet reported. We maintain stop loss insurance coverage to limit our exposure for the self-funded portion of our health insurance program both on a per employee and aggregate basis, and liabilities associated with these losses include estimates of both claims filed and losses incurred but not yet reported. Unanticipated changes in any applicable actuarial assumptions or management estimates underlying our recorded liabilities for these losses could result in materially different amounts of expense than expected under these programs, which could have a material adverse effect on our financial condition and results of operations. In addition, the premiums for this coverage could increase in the future, or we could be forced to raise our self-insured retention amounts. If these expenses increase, or if we experience a claim in excess of our reserve and/or coverage limits, it could also have a material adverse effect on our financial condition and results of operation.
We currently operate without a substantial backlog.
During periods of economic uncertainty, the rate of customer orders can quickly decrease, and a substantial backlog may help promote greater efficiency in production, facilitate business planning and improve revenue visibility. As of September 30, 2022, 16% of the Company’s backlog was expected to be filled beyond fiscal 2023, which is below the Company’s historical expectations and may result in lower revenues in future periods. As a result, future revenue will be dependent on orders booked and shipped in that quarter, and may not be predictable with any degree of certainty. Furthermore, certain contracts may represent a significant portion of our revenue and profits for a quarter such that the loss or deferral of even one such contract could adversely affect our revenue and profitability.
The Company has limited experience in marketing and distributing its products internationally.
IS&S plans to derive increasing revenues from sales outside the United States, particularly in Europe and Asia. Risks inherent in doing business internationally include:
● differing regulatory requirements;
● legal uncertainty regarding liability and the enforceability of agreements;
● tariffs, trade and investment barriers, and other regulatory barriers;
● political and economic instability, including changes in government budgets;
● changes in diplomatic and trade relationships;
● difficulty with staffing and managing widespread operations;
● the impact of recessions in economies outside the United States; and
● variances and unexpected changes in local laws and regulations.
18
Table of Contents
Currently, all of the Company’s international sales are denominated in U.S. dollars. An increase in the dollar’s value compared to other currencies could render the Company’s products less competitive in the international markets. In the future, IS&S may be required to conduct sales in the foreign country’s local currency, thus exposing it to fluctuations and volatility in exchange rates that could adversely affect its operating results. Further, as we pursue customers in Asia and other less developed markets throughout the world, our potential inability to ensure the creditworthiness of counterparties could impose additional risks and affect our overall profitability. Emerging market operations in particular can present many risks, including cultural differences (such as employment and business practices), volatility in gross domestic product, economic and government instability, and the imposition of exchange controls and capital controls.
While these factors and their impact are difficult to predict, any one or more of them could have a material adverse effect on our competitive position, results of operations, cash flows or financial condition.
The Company’s competition includes other manufacturers of air data systems and flight information displays against whom it may not be able to compete successfully.
The markets for the Company’s products are intensely competitive and subject to rapid technological change. Competitors include Honeywell International Inc., Collins Aerospace, Thales Defense & Security, Inc., Garmin Ltd. and GE Aviation Systems. All these competitors have substantially greater financial, technical, and human resources than does IS&S. In addition, these competitors have much greater experience in and resources for marketing their products. As a result, these competitors may be able to respond more quickly to new or emerging technologies and customer preferences, or to devote greater resources to development, promotion and sale of their products than IS&S can. The Company’s competitors may have greater name recognition and more extensive customer bases. Such competition could result in price reductions, fewer customer orders, reduced gross margins, and loss of market share.
General Risk Factors
The ongoing COVID-19 pandemic may adversely affect IS&S.
The Company has not yet seen a material impact from the COVID-19 pandemic on its business, financial position, liquidity, or ability to service customers or maintain critical operations. However, some parts of the world are continuing to see a rise in COVID-19 cases and hospitalizations, and it is possible that new, more virulent strains and variants of COVID-19 may emerge and lead governments and private sectors to re-institute quarantine and trade restrictions, which could adversely impact market conditions. IS&S will continue to monitor the impact of the COVID-19 pandemic on its business, including how it has impacted and will impact the Company’s employees, customers, suppliers and distribution channels. The Company could face liquidity shortages, weaker product demand from its customers, disruptions in its supply chain, and/or staffing shortages in its workforce in the future due to the direct and indirect effects of the COVID-19 pandemic.
If IS&S is unable to respond to rapid technological change, its products could become obsolete and its reputation could suffer.
Future generations of flat panel displays, air data systems, engine and fuel displays, flight management systems and autothrottle technology which embody new technologies or new industry standards could render the Company’s products obsolete. The market for aviation products is subject to rapid technological change, new product introductions, changes in customer preferences, and evolving industry standards and government regulations. The Company’s future success will depend on its ability to:
● embrace rapidly changing technologies;
If IS&S fails to modify or improve its products in response to evolving industry standards and government regulations, its products could rapidly become obsolete.
19
Table of Contents
The Company’s products are currently subject to direct regulation by the FAA and other equivalent organizations. The Company’s products, as they relate to aircraft applications, must be approved by the FAA, EASA, or other equivalent organizations before they can be installed in an aircraft. To be certified, IS&S must demonstrate that its products are accurate and able to maintain certain levels of repeatability over time. Although the certification requirements of the FAA and EASA are substantially similar, no formal reciprocity exists between the two regulators. Accordingly, even though the Company’s products are FAA approved, the Company may need to obtain approval from EASA or other appropriate organizations to have them certified for installation outside the United States.
Significant delay in receiving certification for newly developed products or enhancements to the Company’s products, or the loss of certification for its existing products, could result in lost sales or delays in sales. Furthermore, new regulations or product standards, and changes to existing product standards could require IS&S to change its products and underlying technology. IS&S cannot ensure that it will receive regulatory approval on a timely basis or at all.
IS&S relies on third-party suppliers for components of its products, including any necessary raw materials, and any interruption in the supply of these components could hinder its ability to deliver products on a timely basis.
The Company’s manufacturing process consists primarily of assembling components purchased from its supply chain. The suppliers may not continue to be available to IS&S, including as a result of the impact of the COVID-19 pandemic on their businesses or financial conditions. If the Company is unable to maintain relationships with key third-party suppliers, the development and distribution of its products could be delayed until equivalent components can be obtained and integrated into the products. In addition, substitution of certain components from other manufacturers may require product redesign or FAA, EASA or other approvals, which could delay the Company’s ability to ship products, and any increase in component costs, including the costs of any necessary raw materials, in the Company’s supply chain could adversely affect the Company’s results of operations.
Inasmuch as the Company’s products utilize sophisticated technology and are deployed in complex aircraft cockpit environments, problems with these products may arise that could harm the Company’s reputation for quality assurance and, consequently, its business prospects.
The Company’s products use complex system designs and components that may contain errors, omissions, or defects, particularly when the Company incorporates new technologies into its products or when it releases new versions or enhancements of its existing products. Despite the Company’s quality assurance process, errors, omissions or defects could occur in its current products, in new products, or in new versions or enhancements of existing products. IS&S may be required to redesign or recall those products or pay damages. Such an event could result in the following:
● delay or loss of revenues;
● cancellation of customer contracts;
● diversion of development resources;
● damage to the Company’s reputation;
● increased service and warranty costs; or
● litigation costs.
Although IS&S carries product liability insurance, this insurance may not be adequate to cover its losses in the event of a large product liability claim. In addition, IS&S may not be able to maintain such insurance in the future.
The Company’s success depends on its ability to protect its proprietary rights against potential risk of infringement. If IS&S is unable to protect and enforce its intellectual property rights, it may be unable to compete effectively.
The Company’s success and ability to compete will depend in part on its ability to obtain and maintain patent or other protection for its technology and products, both in the United States and internationally. In addition, IS&S must operate without infringing the proprietary rights of others.
20
Table of Contents
As of September 30, 2022, IS&S holds 14 U.S. patents and has 3 U.S. patent applications pending relating to its technology. In addition, the Company holds 40 international patents and has 2 international patent applications pending. IS&S cannot be certain that patents will be issued on any of its present or future applications. In addition, existing patents or future patents may not adequately protect the Company’s technology if they are not broad enough or are successfully challenged, or if other entities are able to develop competing methods without violating its patents. If IS&S is not successful in protecting its intellectual property, competitors could begin to offer products that incorporate its technology. Patent protection involves complex legal and factual questions, and, therefore, is highly uncertain. Litigation relating to intellectual property is often very time consuming and expensive. If a successful claim of patent infringement were made against IS&S, and if the Company were unable to develop non-infringing technology, or to license the infringed or similar technology on a timely and cost-effective basis, the Company might not be able to produce and sell some of its products. Further, IS&S has incurred, and may continue to incur, significant legal and other costs in defense of its intellectual property.
IS&S depends on key personnel to manage its business effectively, and an inability to retain its key employees and plan for management succession could adversely impact the Company’s ability to compete.
The Company’s success depends on the efforts, abilities, and expertise of its senior management and other key personnel. There can be no assurance IS&S will be able to retain such employees, and the loss of some could damage its ability to execute its business strategy. The Company intends to continue hiring key management, engineering, and sales and marketing personnel. Competition for skilled personnel is intense, and IS&S may not be able to attract or retain additional qualified personnel.
The Company’s future success will depend in part on its ability to implement and improve its operational, administrative and financial systems and controls and to manage, train and expand its employee base. IS&S cannot provide assurance that current and planned personnel levels, systems, procedures, and controls will be adequate to support its current and future customer base. In such a circumstance, the Company may not be able to fully capitalize on existing and potential market opportunities. Any delays or difficulties encountered could impair the Company’s ability to attract new customers or maintain its relationships with existing customers. In addition, effective succession planning is important to our long-term success. Failure to ensure effective transfer of knowledge and smooth transitions involving senior management and other key personnel could hinder our strategic planning and execution.
The Company’s revenue and operating results may vary significantly from quarter to quarter, which may cause its stock price to decline.
The Company’s revenue and operating results may vary significantly from quarter to quarter because of a number of factors, including, but not limited to:
● demand for products and/or delivery schedule changes by its customers;
● delays in introducing or obtaining government approval for new products;
● new product introductions by competitors;
● changes in IS&S pricing policies or pricing policies of competitors; and
● costs related to possible acquisition of technologies or businesses.
21
Table of Contents
A cyber security incident or other technology disruption could have a negative impact on our business.
We face certain security threats and technology disruptions, including threats to our information technology (“IT”) infrastructure, attempts to gain access to our or our customers’ proprietary or classified information, threats of terrorism events, and failures of our technology tools and systems. Our IT networks and related systems are critical to the operation of our business and essential to our ability to successfully perform day-to-day operations. We are also involved with IT systems for certain customers and other third parties, for which we face similar security threats as for our own, in particular the DoD. In particular, cybersecurity threats—which include, but are not limited to, computer viruses, spyware and malware, attempts to access information, denial of service attacks and other electronic security breaches—are persistent and evolve quickly. In general, such threats have increased in frequency, scope and potential impact in recent years. Further, a variety of technological tools and systems, including both company-owned IT and technological services provided by outside parties, support our critical functions. These technologies, as well as our products, are subject to failure and the user’s inability to have such technologies properly supported, updated, expanded or integrated into other technologies and, in certain cases, may contain open source and third-party software which may unbeknownst to us contain defects or viruses that pose unintended risks. These risks, if not effectively mitigated or controlled, could materially harm our business or reputation. While we believe that we have implemented appropriate measures and controls, there can be no assurance that such actions will be sufficient to prevent disruptions to critical systems, unauthorized release of confidential information or corruption of data.
The security measures we have implemented may become subject to third-party security breaches, employee error, malfeasance, faulty password management or other irregularities. For example, third parties may attempt to fraudulently induce employees or customers into disclosing user names, passwords or other sensitive information, which may in turn be used to access our IT systems. These security systems cannot provide absolute security. To the extent we were to experience a breach of our systems and were unable to protect sensitive data, such a breach could materially damage business partner and customer relationships, and curtail or otherwise impact the use of our IT systems. Moreover, if a security breach of our IT systems affects our computer systems or results in the release of personally identifiable or other sensitive information of customers, business partners, employees and other third parties, our reputation and brand could be materially damaged, use of our products and services could decrease, and we could be exposed to a risk of loss, litigation and potential liability.
Such an event could require significant management attention and resources, negatively impact our reputation among our customers and the public and challenge our eligibility for future work on sensitive or classified systems, which could have a material adverse effect on our business, financial condition and results of operations.
Litigation with customers, employees and others could harm our reputation and impact operating results.
In the ordinary course of business, we may be involved in lawsuits and regulatory actions with customers, employees and others. Additionally, we may be subject to employment-related claims alleging discrimination, harassment, wrongful termination and wage issues, including those relating to overtime compensation. We are susceptible to claims filed by customers alleging responsibility for breaches of contract or from product defects, and we are also subject to lawsuits filed by patent holders alleging patent infringement. These types of claims, as well as other types of lawsuits to which we are subject from time to time, can distract management’s attention from core business operations and impact operating results, particularly if a lawsuit results in an unfavorable outcome, or could harm the Company’s reputation with customers, employees, investors and others.
Tax changes could affect the Company’s effective tax rate and future profitability.
The Company’s future results could be affected negatively by changes in the effective tax rate as a result of changes in the overall profitability and changes to statutory tax rates in the United States and in other jurisdictions, changes in tax legislation, and the results of audits and examinations of previously filed tax returns. In addition, adverse changes in the underlying profitability and financial outlook of our operations or future changes in tax law could lead to changes in the value of tax assets or liabilities that we currently or in the future may hold, which could materially affect our results of operations. Further, the nature and impact of any future changes to tax law, and the resulting impact on our business, financial condition and results of operations, are uncertain.
22
Table of Contents
The Company is subject to various laws and regulations. Changes to, or failure by the Company to comply with, these laws and regulations could have a significant impact on the Company’s business and operations.
The Company is subject to, and must comply with, various laws and regulations, including, but not limited to, the product-related and other regulations of the FAA and the EASA, U.S. government procurement regulations, the rules and regulations of the SEC, and local, state, federal, and international tax codes, import and export controls and customs laws, employment and employment-related laws, environmental laws, intellectual property laws, and consumer protection statutes. Failure to comply with all applicable laws could result in investigation and remediation costs to the Company and could adversely impact the operations and profits of the Company. In addition, the evolving and at times overlapping regulatory regimes to which the Company is subject may change at any time, including as a result of the upcoming change in the U.S. presidential administration. Any changes to existing laws or regulations, or the adoption of new laws or regulations, could increase our compliance costs and operating costs. In addition, failure to timely comply with regulatory changes could cause payments to be withheld and/or an impact on future business.
Volatility and weakness in capital markets may adversely affect credit availability and related financing costs, which could adversely affect IS&S.
Bank and capital markets can experience periods of volatility and disruption. During these periods of volatility and disruption, risks to IS&S include:
● reduced access to credit sources; and
If the Company fails to maintain an effective system of internal control over financial reporting, it may not be able to accurately report its financial condition, results of operations or cash flows, which may adversely affect investor confidence in the Company and, as a result, the value of the Company’s common stock.
The Sarbanes-Oxley Act of 2002, as amended (the “Sarbanes-Oxley Act”) requires, among other things, that the Company maintain effective internal control over financial reporting and disclosure controls and procedures. Under Section 404 of the Sarbanes-Oxley Act, the Company is required to furnish a report by management on, among other things, the effectiveness of the Company’s internal control over financial reporting. This assessment must include disclosure of any material weaknesses identified by management in the Company’s internal control over financial reporting. A material weakness is a control deficiency, or combination of control deficiencies, in internal control over financial reporting that results in more than a reasonable possibility that a material misstatement of annual or interim financial statements will not be prevented or detected on a timely basis. Section 404 of the Sarbanes-Oxley Act also generally requires an attestation from the Company’s independent registered public accounting firm on the effectiveness of the Company’s internal control over financial reporting.
The Company’s compliance with Section 404 requires that it compile the system and process documentation necessary to perform an appropriate evaluation. During the evaluation and testing process, if the Company identifies one or more material weaknesses in its internal control over financial reporting, it will be unable to assert that its internal control over financial reporting is effective. The Company cannot assure you that there will not be material weaknesses or significant deficiencies in its internal control over financial reporting in the future. Any failure to maintain internal control over financial reporting could severely inhibit the Company’s ability to accurately report its financial condition, results of operations or cash flows. If the Company is unable to conclude that its internal control over financial reporting is effective, or if its independent registered public accounting firm determines the Company has a material weakness or significant deficiency in its internal control over financial reporting once that firm begin its reviews, the Company could lose investor confidence in the accuracy and completeness of its financial reports, the market price of its common stock could decline, and it could be subject to sanctions or investigations by NASDAQ, the Securities and Exchange Commission or other regulatory authorities. Failure to remedy any material weakness in the Company’s internal control over financial reporting, or to implement or maintain other effective control systems required of public companies, could also restrict the Company’s future access to the capital markets.
Item 1B. Unresolved Staff Comments.
None
23
Table of Contents
Item 2. Properties.
In fiscal 2001, IS&S purchased 7.5 acres of land in the Eagleview Corporate Park in Exton, Pennsylvania. Shortly thereafter, the Company constructed a 45,000 square foot design, manufacturing and office facility on this site. Land development approval allows for expansion of up to 20,400 square feet. Such expansion would provide for a 65,400 square foot facility which the Company believes is adequate to meet the needs of the Company for the foreseeable future.
The Company had occupied approximately 8,358 square feet of office and warehouse space in Exton, Pennsylvania under a lease that expired March 2021. The Company’s fiscal year ended September 30, 2021 lease expense for this property was approximately $34,000.
The Company leased two separate hangars to house the Company’s airplanes in New Castle County, Delaware under month-to-month leases. One hangar lease expired with the sale of the Pilatus PC-12 airplane during the quarter ended September 30, 2022. The annual lease expense for both hangars was approximately $52,000.
Item 3. Legal Proceedings.
In the ordinary course of business, IS&S is at times subject to various legal proceedings and claims. The Company does not believe any such matters that are currently pending will, individually or in the aggregate, have a material effect on the results of operations or financial position.
Item 4. Mine Safety Disclosures.
Not applicable.
PART II
Item 5. Market for the Registrant’s Common Equity, Related Stockholder Matters, and Issuer purchases of Equity Securities.
The Company’s common stock has been traded on the NASDAQ Global Select Market(R) tier of the NASDAQ Stock Market, LLC under the symbol “ISSC” since its initial public offering on August 4, 2000.
Many of our shares of common stock are held by brokers and other institutions on behalf of stockholders, as a result, we are unable to estimate the total number of stockholders represented by these record holders.
The Company did not pay cash dividends in fiscal 2022. The declaration and payment of any dividend in the future will be at the discretion of the Company’s Board of Directors.
On September 4, 2020, the Company’s Board of Directors declared a special cash dividend in the amount of $0.65 per share, payable on October 1, 2020 to shareholders of record as of the close of business on September 15, 2020. The total dividend payment was approximately $11.2 million.
On December 10, 2020, the Company’s Board of Directors declared a special cash dividend in the amount of $0.50 per share, payable on December 30, 2020 to shareholders of record as of the close of business on December 21, 2020. The total dividend payment was approximately $8.6 million.
24
Table of Contents
Item 6. Selected Consolidated Financial Data.
The following tables present portions of the Company’s consolidated financial statements. The following selected consolidated financial data set forth below should be read together with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes to the consolidated financial statements appearing elsewhere herein. The selected statement of operations data for the fiscal years ended September 30, 2022, 2021 and 2020 and the balance sheet data as at September 30, 2022 and 2021 are derived from the Company’s audited consolidated financial statements included elsewhere in this Annual Report on Form 10-K. The selected statements of operations data for the fiscal years ended September 30, 2019 and 2018 and the balance sheet data as at September 30, 2020, 2019 and 2018 are extracted from the Company’s audited consolidated financial statements that are not included in this Annual Report on Form 10-K.
Fiscal year ended September 30,
Statements of Operations Data:
Net income (loss) per common share:
Cash dividends declared per common share $ — $ 0.50 $ 0.65 $ — $ —
Weighted average shares outstanding:
As of September 30,
Balance Sheet Data:
Restricted Cash — — 11,180,900 — —
25
Table of Contents
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
Objective
The following discussion provides an analysis of the Company’s financial condition, cash flows and results of operations from management’s perspective and should be read in conjunction with “Selected Consolidated Financial Data” and the consolidated financial statements and related notes included in this report. Our objective is to also provide discussion of events and uncertainties known to management that are reasonably likely to cause reported financial information not to be indicative of future operating results or of future financial condition and to offer information that provides understanding of our financial condition, cash flows and results of operations.
Overview
Innovative Solutions and Support, Inc. (the “Company,” “IS&S”, “we” or “us”) was incorporated in Pennsylvania on February 12, 1988. The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells, and services, air data equipment, engine display systems, standby equipment, primary flight guidance, autothrottles and cockpit display systems for retrofit applications and original equipment manufacturers (“OEMs”). The Company supplies integrated Flight Management Systems (“FMS”), Flat Panel Display Systems (“FPDS”), FPDS with Autothrottle, air data equipment, Integrated Standby Units (“ISU”), ISU with Autothrottle and advanced GPS receivers that enable reduced carbon footprint navigation.
The Company has continued to position itself as a system integrator, which provides the Company with the capability and potential to generate more substantive orders over a broader product base. This strategy, as both a manufacturer and integrator, is designed to leverage the latest technologies developed for the computer and telecommunications industries into advanced and cost-effective solutions for the general aviation, commercial air transport, United States Department of Defense (“DoD”)/governmental, and foreign military markets. This approach, combined with the Company’s industry experience, is designed to enable IS&S to develop high-quality products and systems, to reduce product time to market and to achieve cost advantages over products offered by its competitors.
The Company sells to both the OEM and the retrofit markets. Customers include various OEMs, commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers, government agencies, and foreign militaries. Occasionally, IS&S sells its products directly to DoD; however, the Company sells its products primarily to commercial customers for end use in DoD programs. Sales to defense contractors are generally made on commercial terms, although some of the termination and other provisions of government contracts are applicable to these contracts. The Company’s retrofit projects are generally pursuant to either a direct contract with a customer or a subcontract with a general contractor to a customer (including government agencies).
Cost of sales related to product sales comprises material, components and third-party avionics purchased from suppliers, direct labor, and overhead costs. Many of the components are standard, although certain parts are manufactured to meet IS&S specifications. The overhead portion of cost of sales primarily comprises salaries and benefits, building occupancy costs, supplies, and outside service costs related to production, purchasing, material control, and quality control. Cost of sales includes warranty costs.
Cost of sales related to Engineering Development Contracts (“EDC”) sales comprises engineering labor, consulting services, and other costs associated with specific design and development projects. These costs are incurred pursuant to contractual arrangements and are accounted for typically as contract costs within cost of sales, with the reimbursement accounted for as a sale in accordance with the percentage-of-completion method or completed contract method of accounting. Company funded research and development (“R&D”) expenditures relate to internally-funded efforts for the development of new products and the improvement of existing products. These costs are expensed as incurred and reported as R&D expenses. The Company intends to continue investing in the development of new products that complement current product offerings and to expense associated R&D costs as they are incurred.
Selling, general and administrative expenses consist of sales, marketing, business development, professional services, salaries and benefits for executive and administrative personnel, facility costs, recruiting, legal, accounting and other general corporate expenses.
26
Table of Contents
IS&S sells its products to agencies of the United States and foreign governments, aircraft operators, aircraft modification centers, and OEMs. Customers have been and may continue to be affected by changes in economic conditions both in the United States and abroad. Such changes may cause customers to curtail or delay their spending on both new and existing aircraft. Factors that can impact general economic conditions and the level of spending by customers include, but are not limited to, the impact of the ongoing COVID-19 pandemic, general levels of consumer spending, increases in fuel and energy costs, conditions in the real estate and mortgage markets, labor and healthcare costs, access to credit, consumer confidence, and other macroeconomic factors that affect spending behavior. Furthermore, spending by government agencies may be reduced in the future if tax revenues decline. If customers curtail or delay their spending or are forced to declare bankruptcy or liquidate their operations because of adverse economic conditions, the Company’s revenues and results of operations would be affected adversely. For example, earlier in the 2020 fiscal year, certain of the Company’s customers temporarily suspended product deliveries as a result of the COVID-19 pandemic, and while these deliveries subsequently resumed, there is a possibility that the COVID-19 pandemic will result in other suspensions, delays or order cancellations by the Company’s customers or suppliers.
In particular, the ongoing COVID-19 pandemic is a significant event, driver of market trends, and source of uncertainty that may ultimately have a direct or indirect material impact on the Company’s business, financial position, liquidity, or ability to service customers or maintain critical operations. In direct response to the COVID-19 pandemic, the Company has taken specific actions to seek to ensure the safety of its employees, including temperature monitoring, frequent sanitization of workspaces, observance of social distancing protocols, and other increased safety measures.
Results of Operations
The following table sets forth statements of operations data expressed as a percentage of total net sales for the fiscal years indicated:
Twelve Months Ending September 30,
Engineering development contracts 1.7 % 1.2 % 3.7 %
Cost of sales:
Engineering development contracts 0.6 % 0.3 % 1.0 %
Operating expenses:
Research and development 9.8 % 11.4 % 13.7 %
Selling, general and administrative 24.3 % 27.1 % 28.2 %
Total operating expenses 34.1 % 38.5 % 41.9 %
Interest income 0.2 % 0.0 % 0.7 %
Other income 0.2 % 0.3 % 0.3 %
Income before income taxes 26.4 % 17.3 % 13.8 %
Income tax expense (benefit) 6.5 % (4.7) % (1.3) %
27
Table of Contents
Fiscal Year Ended September 30, 2022 Compared to Fiscal Year Ended September 30, 2021
Net sales. Net sales for fiscal 2022 increased $4.7 million, or 20.4%, to $27.7 million from $23.0 million for fiscal 2021. For fiscal 2022, product sales increased $3.7 million and customer service sales increased $0.8, or 20.8% from fiscal 2021. This increase in product sales primarily reflects increased shipments of aftermarket retrofit displays to commercial customers. OEM sales to general aviation customers were relatively flat compared to fiscal 2021 at $10.4 million. Military sales were up slightly from fiscal 2021 at $2.8 million, which was up $0.3 million or 13.5%. The increase in customer service revenue was mainly due to increases in repair work from the Department of Defense.
Cost of sales. Cost of sales was $11.1million or 39.9% of net sales, for fiscal 2022 compared to $10.3 million, or 44.5% of net sales, in fiscal 2021. The increase in cost of sales was primarily the result of an increase in product sales volume. The Company’s overall gross margin in fiscal 2021 was 60.1% compared to 55.5% in fiscal 2021. The fiscal 2022 gross margin percentage increase was attributable to operating leverage achieved due to increased sales that resulted in increased cost absorption, as well as a favorable product mix.
Research and development. R&D expense was $2.7 million for fiscal 2022 and $2.6 million for fiscal 2021. R&D expense decreased to 9.8% of net sales in fiscal 2022 compared to 11.4% of net sales in fiscal 2021. This decrease in R&D expense as a percent of net sales was due to lower salaries and benefits due to lower headcount, along with fewer R&D related projects, including STC certifications.
Selling, general, and administrative (“SG&A”). SG&A expense increased $0.5 million or 7.9% to $6.8 million from $6.3 million in fiscal 2021. The increase in SG&A expense was primarily the result of increased legal, and professional fees, with an offset due to the sale of a PC-12 aircraft.
Interest income. Interest income of $61,051 in fiscal 2022 increased by $59,817 as compared to fiscal 2021 interest income of $1,234. The increase in interest income was primarily the result of the increase in the cash balance in fiscal 2022 and a general increase in interest rates as compared to fiscal 2021.
Other income. Other income was flat at $0.1 million for both fiscal 2022 and fiscal 2021.
Income taxes. Income tax expense of $1.8 million for fiscal 2022 as compared to income tax benefit of $1.1 million in fiscal 2021. The effective tax rate benefit for fiscal 2021 was 27.4% and differs from the statutory rate primarily due to the release of the valuation allowance for all federal and state deferred tax assets. This release both increased the deferred tax asset and removed the valuation allowance. Fiscal 2022 income tax expense of $1.8 million represents income taxes due based on an effective tax rate of 24.7% with no related allowances.
Net income. As a result of the factors described above, the Company’s net income for fiscal 2022 was $5.5 million compared to net income of $5.1 million for fiscal 2021. On a fully diluted basis, net income per share was $0.32 for fiscal 2022, compared to a net income of $0.29 per share for fiscal 2021.
28
Table of Contents
Fiscal Year Ended September 30, 2021 Compared to Fiscal Year Ended September 30, 2020
Net sales. Net sales for fiscal 2021 increased $1.4 million, or 6.7%, to $23.0 million from $21.6 million for fiscal 2020. For fiscal 2021, product sales increased $1.9 million and EDC sales decreased $0.5 million, in each case, compared to fiscal 2020. This increase in product sales primarily reflects increased shipments for OEM programs to general aviation customers and displays for retrofit programs to commercial transport customers. These increases were partially offset by reduced shipments under the U.S. Navy F-5 production contract and displays for retrofit programs to other military customers compared to fiscal 2020. The decrease in EDC sales was primarily the result of the completion of a modification contract with the U.S. Navy in 2020.
Cost of sales. Cost of sales was $10.3 million or 44.5% of net sales, for fiscal 2021 compared to $9.8 million, or 45.3% of net sales, in fiscal 2020. The increase in cost of sales was primarily the result of an increase in product sales volume. The Company’s overall gross margin in fiscal 2021 was 55.5% compared to 54.7% in fiscal 2020. The fiscal 2021 gross margin percentage increase was attributable to product mix as well as the favorable leverage achieved by the growth in revenues.
Research and development. R&D expense was $2.6 million for fiscal 2021 and $3.0 million for fiscal 2020. R&D expense decreased to 11.4% of net sales in fiscal 2021 compared to 13.7% of net sales in fiscal 2020. This decrease in R&D expense was primarily the result of a decrease in third party costs related to STC certifications offset by an increase in payroll and payroll related benefits.
Selling, general, and administrative (“SG&A”). SG&A expense increased $0.2 million or 2.6% to $6.3 million or 27.2% of net sales, for fiscal 2021 from $6.1 million, or 28.2%, for fiscal 2020. The increase in SG&A expense was primarily the result of an increase in employee stock compensation, payroll and payroll related benefits.
Interest income, net. Net interest income of $1,234 in fiscal 2021 decreased by $153,716 as compared to fiscal 2020 interest income of $154,950. The decrease in interest income was primarily the result of decreased cash balance and lower interest rates in fiscal 2021 as compared to fiscal 2020.
Other income. Other income is primarily composed of royalties earned and increased by $14,409, to $74,906 in fiscal 2021 from $60,497 in fiscal 2020.
Income taxes. Income tax benefit for fiscal 2021 was $1,087,783 as compared to income tax benefit of $308,882 for fiscal 2020. The effective tax rate benefit for fiscal 2021 was 27.4% and differs from the statutory rate primarily due to the release of the valuation allowance for all federal and state deferred tax assets with the exception of certain state net operating losses for jurisdictions in which the Company does not believe these net operating losses are more likely than not to be realized. This release both increased the deferred tax asset and removed the valuation allowance.
Net income. As a result of the factors described above, the Company’s net income for fiscal 2021 was $5.1 million compared to net income of $3.3 million for fiscal 2020. On a fully diluted basis, net income per share was $0.29 for fiscal 2021, compared to a net income of $0.19 per share for fiscal 2020.
29
Table of Contents
Liquidity and Capital Resources
The following table highlights key financial measurements of the Company:
September 30, September 30,
Twelve Months Ended September 30,
Cash flow activities:
(1) Excludes contract liability
(3) Calculated as: current assets divided by current liabilities
The Company’s principal source of liquidity has been cash flows from current year operations and cash accumulated from prior years’ operations. Cash is used principally to finance inventory, accounts receivable, contract assets, and payroll, as well as the Company’s known contractual and other commitments (including those described in Note 16, “Lease Recognition”. The Company’s existing cash balances and anticipated cash flows from operations are expected to be adequate to satisfy the Company’s liquidity needs for at least the next 12 months. Apart from what has been disclosed above, management is not aware of any trends, events or uncertainties that have had or are likely to have a material impact on our liquidity, financial condition and capital resources.
The Company did not pay cash dividends in fiscal 2022. The declaration and payment of any dividend in the future will be at the discretion of the Company’s Board of Directors.
On September 4, 2020, the Company’s Board of Directors declared a special cash dividend in the amount of $0.65 per share, payable on October 1, 2020 to shareholders of record as of the close of business on September 15, 2020. The total dividend payment was approximately $11.2 million.
On December 10, 2020, the Company’s Board of Directors declared a special cash dividend in the amount of $0.50 per share, payable on December 30, 2020 to shareholders of record as of the close of business on December 21, 2020. The total dividend payment was approximately $8.6 million.
The ongoing COVID-19 pandemic is a significant event, driver of market trends, and source of uncertainty that may have a material impact on the Company’s liquidity, financial condition, capital resources, cash flows or operating results. In direct response to the COVID-19 pandemic, the Company has taken specific actions to seek to ensure the safety of its employees, including temperature monitoring, frequent sanitization of workspaces, observance of social distancing protocols, and other increased safety measures.
30
Table of Contents
Operating Activities
The Company generated $6.1 million of cash from operating activities during fiscal 2022 as compared to cash generated of $4.6 million during fiscal 2021. The cash generated by operating activities for the year ended September 30, 2022 was primarily generated by net income of $5.5 million, increase in accrued expenses of $1.3 million and a decrease in deferred income tax assets of $1.0 million, partially offset by the gain on sale of the Company’s Pilatus PC-12 airplane of $1.2 million and an increase in inventories of $0.7 million.
The Company generated $4.6 million of cash in operating activities during fiscal 2021 as compared to cash generated of $2.2 million during fiscal 2020. The cash generated by operating activities for the year ended September 30, 2021 was primarily generated by net income of $5.1 million, depreciation and amortization of $0.4 million and a decrease in accounts receivable of $0.3 million, partially offset by an increase in deferred income tax assets of $1.2 million.
Investing Activities
Cash provided by investing activities was $2.6 million for fiscal year 2022 and consisted primarily of proceeds from the sale of the Company’s Pilatus PC-12 airplane offset by spending of $0.2 million primarily for quality test equipment and computer hardware. The Company plans to continue investing in capital equipment to support engineering development efforts and operations.
Cash used in investing activities was $0.3 million for fiscal year 2021 and consisted of spending for manufacturing facility and laboratory test equipment. The Company plans to continue investing in capital equipment to support engineering development efforts and operations.
Financing Activities
Cash provided by financing activities was $0.3 million for fiscal year 2022 and consisted of proceeds from employees’ exercise of stock options. Cash used by financing activities was $19.8 million for fiscal year 2021 and consisted primarily of dividends paid.
Summary
Future capital requirements depend upon numerous factors, including market acceptance of the Company’s products, the timing and rate of expansion of business, acquisitions, joint ventures, and other factors. IS&S has experienced increases in expenditures since its inception and anticipates that expenditures will remain relatively constant with the levels experienced in fiscal 2022 and fiscal 2021. The Company believes that its cash and cash equivalents will provide sufficient capital to fund operations for at least the next twelve months. Further, IS&S may need to develop and introduce new or enhanced products, to respond to competitive pressures, to invest in or acquire businesses or technologies, or to respond to unanticipated requirements or developments. If insufficient funds are available, the Company may not be able to introduce new products or to compete effectively.
Inflation
IS&S does not believe inflation had a material effect on its financial position or results of operations during the past three years; however, it cannot predict future effects of inflation.
31
Table of Contents
Impact of the COVID-19 Pandemic
The Company has not yet seen a material impact from the COVID-19 pandemic on its business, financial position, liquidity, or ability to service customers or maintain critical operations. However, some parts of the world are continuing to see a rise in COVID-19 cases and hospitalizations and it is possible that new, more virulent strains and variants of COVID-19 may emerge and lead governments and private sectors to re-institute quarantine and trade restrictions, which could adversely impact market conditions. IS&S will continue to monitor the impact of the COVID-19 pandemic on its business, including how it has impacted and will impact the Company’s employees, customers, suppliers and distribution channels. The Company could face liquidity shortages, weaker product demand from its customers, disruptions in its supply chain, and/or staffing shortages in its workforce in the future due to the direct and indirect effects of the COVID-19 pandemic.
Environmental, Social and Governance Considerations
In recent years, environmental, social and governance (“ESG”) issues have become an increasing area of focus for some of our shareholders, customers and suppliers. Management and the Company’s Board of Directors are committed to identifying, assessing, and understanding the potential impact of ESG issues and related risks on the Company’s business model, as well as potential areas of improvement.
We are committed to recruiting, motivating and developing a diversity of talent. We are an equal opportunity employer and a Vietnam Era Veterans’ Readjustment Assistance Act federal contractor. All qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law.
The nature of our business also supports long-term sustainability. Historically, a majority of the Company’s sales have come from the retrofit market, in which the Company, by making upgrades to improve the functionality and safety of existing machinery, facilitates the re-use and recycling of aircraft and equipment that might otherwise be scrapped as obsolete. The Company’s GPS receivers also facilitate reduced carbon footprint navigation. The Company also plans to enhance its focus on the environmental impact of its operations.
Critical Accounting Policies and Estimates
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (“GAAP”) requires management to make estimates and assumptions that affect reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenues and expenses during the reporting period. The Company’s most critical accounting policies are revenue recognition, income taxes and inventory valuation.
Revenue recognition
The Company enters into sales arrangements with customers that, in general, provide for the Company to design, develop, manufacture and deliver large flat-panel display systems, flight information computers, autothrottles and advanced monitoring systems that measure and display critical flight information, including data relative to aircraft separation, airspeed, altitude, and engine and fuel data measurements.
Revenue from Contracts with Customers
The Company accounts for revenue in accordance with ASC 606, Revenue from Contracts with Customers (“ASC 606”). The core principle of ASC 606 is that an entity recognizes revenue when a customer obtains control of promised goods or services. The amount of revenue recognized reflects the consideration to which the Company expects to be entitled to receive in exchange for these goods or services. To achieve this core principle, the Company applies the following five steps:
32
Table of Contents
1) Identify the contract with a customer
The Company’s contract with its customers typically is the form of a purchase order issued to the Company by its customers and, to a lesser degree, in the form of a purchase order issued in connection with a formal contract executed with a customer. For the purpose of accounting for revenue under ASC 606, a contract with a customer exists when (i) the Company enters into an enforceable contract with a customer that defines each party’s rights regarding the goods or services to be transferred and identifies the payment terms related to these goods or services, (ii) the contract has commercial substance and, (iii) the Company determines that collection of substantially all consideration for goods or services that are transferred is probable based on the customer’s intent and ability to pay the promised consideration. Payment terms are defined by when payment is typically due. The Company applies judgment in determining the customer’s ability and intention to pay, which is based on a variety of factors including the customer’s historical payment experience or, in the case of a new customer, published credit and financial information pertaining to the customer.
2) Identify the performance obligations in the contract
Performance obligations promised in a contract are identified based on the goods or services that will be transferred to the customer that are both capable of being distinct, whereby the customer can benefit from the good or service either on its own or together with other resources that are readily available from third parties or from the Company, and are distinct in the context of the contract, whereby the transfer of the goods or services is separately identifiable from other promises in the contract. Most of our revenue is derived from purchases under which we provide a specific product or service and, as a result, there is only one performance obligation. In the event that a contract includes multiple promised goods or services, such as an EDC contract which includes both engineering services and a resulting product shipment, the Company must apply judgment to determine whether promised goods or services are capable of being distinct in the context of the contract. In these cases, the Company considers whether the customer could, on its own, or together with other resources that are readily available from third parties, produce the physical product using only the output resulting from the Company’s completion of engineering services. If the customer cannot produce the physical product, then the promised goods or services are accounted for as a combined performance obligation.
3) Determine the transaction price
The transaction price is determined based on the consideration to which the Company will be entitled in exchange for transferring goods or services to the customer. To the extent the transaction price includes variable consideration, the Company estimates the amount of variable consideration that should be included in the transaction price utilizing either the expected value method or the most likely amount method depending on the nature of the variable consideration. Variable consideration is included in the transaction price if, in the Company’s judgment, it is probable that a significant future reversal of cumulative revenue under the contract will not occur.
4) Allocate the transaction price to performance obligations in the contract
If the contract contains a single performance obligation, the entire transaction price is allocated to the single performance obligation. The Company determines standalone selling price based on the price at which the performance obligation is sold separately. If the standalone selling price is not observable through past transactions, the Company estimates the standalone selling price by taking into account available information such as market conditions as well as the cost of the goods or services and the Company’s normal margins for similar performance obligations.
5) Recognize revenue when or as the Company satisfies a performance obligation
The Company satisfies performance obligations either over time or at a point in time as discussed in further detail below. Revenue is recognized at the time the related performance obligation is satisfied by transferring a promised good or service to a customer. Historically, the Company has also recognized revenue from EDC contracts and is recognized over time using an input measure (e.g., costs incurred to date relative to total estimated costs at completion) to measure progress. Contract costs include material, components and third-party avionics purchased from suppliers, direct labor, and overhead costs.
Contract Balances
Contract assets consist of the right to consideration in exchange for product offerings that we have transferred to a customer under the contract. Contract liabilities primarily relate to consideration received in advance of performance under the contract.
33
Table of Contents
Customer Service Revenue
The Company enters into sales arrangements with customers for the repair or upgrade of its various products that are not under warranty. The Company’s customer service revenue and cost of sales are included in product sales and product cost of sales, respectively, on the accompanying consolidated statements of operations.
Income taxes
Income taxes are recorded in accordance with ASC Topic 740, “Income Taxes” (“ASC Topic 740”), which utilizes a balance sheet approach to provide for income taxes. Under this method, the Company recognizes deferred tax assets and liabilities for temporary differences between the financial reporting basis and the tax basis of the Company’s assets, liabilities, and expected benefits of utilizing NOLs and tax credit carry-forwards. The impact on deferred taxes of changes in tax rates and laws, if any, are applied to the years during which temporary differences are expected to be settled, and are reflected in the consolidated financial statements in the period of enactment. At the end of each interim reporting period, the Company prepares an estimate of the annual effective income tax rate and applies that annual effective income tax rate to ordinary year-to-date pre-tax income for the interim period. Specific tax items discrete to a particular quarter are recorded in income tax expense for that quarter. The estimated annual effective tax rate used in providing for income taxes on a year-to-date basis may change in subsequent periods.
Deferred tax assets are reduced by a valuation allowance if, based on the consideration of all available evidence, it is more likely than not that some portion of the deferred tax asset will not be realized. Significant weight is given to evidence that can be verified objectively, and significant management judgment is required in determining any valuation allowance recorded against net deferred tax assets. The Company evaluates deferred income taxes on a quarterly basis to determine if a valuation allowance is required by considering available evidence. Deferred tax assets are recognized when expected future taxable income is sufficient to allow the related tax benefits to reduce taxes that would otherwise be payable. The sources of taxable income that may be available to realize the benefit of deferred tax assets are future reversals of existing taxable temporary differences, future taxable income exclusive of reversing temporary differences and credit carryforwards, taxable income in carry-back years, and tax planning strategies which are both prudent and feasible. For the year ended September 30, 2021, the valuation allowance was released against all federal and state deferred tax assets with the exception of certain state net operating losses due to positive evidence that the assets are more likely than not to be realized in future years. The Company will continue to assess all available evidence during future periods to evaluate any changes to the realization of its deferred tax assets. If the Company were to determine that it would be able to realize additional state deferred tax assets in the future, it would make an adjustment to the valuation allowance which would reduce the provision for income taxes.
The accounting for uncertainty in income taxes requires a more likely than not threshold for financial statement recognition and measurement of tax positions taken or expected to be taken in a tax return. The Company records a liability for the difference between the (i) benefit recognized and measured for financial statement purposes and (ii) the tax position taken or expected to be taken on the Company’s tax return. To the extent that the Company’s assessment of such tax positions changes, the change in estimate is recorded in the period in which the determination is made. The Company has elected to record any interest or penalties associated with uncertain tax positions as income tax expense.
The Company files a consolidated U.S. federal income tax return. The Company prepares and files tax returns based on the interpretation of tax laws and regulations, and records estimates based on these judgments and interpretations. In the normal course of business, the tax returns are subject to examination by various taxing authorities. Such examinations may result in future tax and interest assessments by these taxing authorities, and the Company records a liability when it is probable that there will be an assessment. The Company adjusts the estimates periodically as a result of ongoing examinations by and settlements with the various taxing authorities, and changes in tax laws, regulations and precedent. The consolidated tax provision of any given year includes adjustments to prior years’ income tax accruals that are considered appropriate, and any related estimated interest. Management believes that it has made adequate accruals for income taxes. Differences between estimated and actual amounts determined upon ultimate resolution, individually or in the aggregate, are not expected to have a material effect on the Company’s consolidated financial position but could possibly be material to its consolidated results of operations or cash flow of any one period.
34
Table of Contents
In March 2020, in response to the COVID-19 pandemic, the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) was signed into law to provide emergency assistance to affected individuals, families, and businesses. The CARES Act provides numerous tax provisions and other stimulus measures, including temporary changes regarding the prior and future utilization of NOLs. The CARES Act amends the NOL provisions of the Tax Act, allowing for the carryback of losses arising in tax years beginning before December 31, 2017, to each of the two taxable years preceding the taxable year of loss. Approximately $1,500,000 of pre-tax NOL was carried back two years to fully offset taxable income. This carryback frees up previously utilized R&D credits, resulting in an estimated increase in R&D credit carryforward of $196,000. The carryback created approximately $16,000 of AMT tax, which was refunded. The cash impact of this carryback was $309,412. A receivable was setup for this amount as of March 31, 2020 and the cash has since been received.
In December 2020, the Consolidations Appropriations Act of 2020 (the “CAA”) was enacted as a supplement to the CARES Act legislation providing additional financial relief to taxpayers adversely impacted by restrictions put into place in response to the COVID-19 pandemic. In addition, the CCA provides funding for public health initiatives in response to the pandemic. This legislation did not have a material impact on the Company’s tax position.
In March 2021, the American Rescue Plan Act of 2021 (the “ARPA”), which includes certain business tax provisions, was signed into law. This legislation did not have a material impact on the Company’s tax position.
In August 2022, the U.S government enacted the Inflation Reduction Act (the “IRA”). The IRA makes the following changes to the U.S tax code: imposes a corporate alternative minimum tax of 15% on corporations with an average annual Adjusted Financial Statement Income over a three year period in excess of $1 billion, increases the amount of R&D credit that qualified businesses can apply against payroll taxes to $500,000, imposes an excise tax equal to one percent of the fair market value of stock of a publicly traded U.S. corporation that is repurchased by the company. These changes predominately apply to tax years beginning after December 31, 2022. It does not appear that this legislation will have a material impact on the Company’s tax position.
Inventory valuation
The Company values inventory at the lower of cost (first-in, first-out) or net realizable value. Inventories are written down for estimated obsolescence equal to the difference between inventory cost and estimated net realizable value based on a combination of historical usage and assumptions based on expected usage related to estimated future customer and market demands. The Company’s method of valuing inventory contains uncertainties because the calculation requires management to consider inventory aging, to make assumptions regarding expected usage, and to apply judgments on forecasted future demand, market conditions, and technological obsolescence. If actual future demand or market conditions are less favorable than those projected by management, additional inventory write-down may be required.
New Accounting Pronouncements
In June 2016, FASB issued ASU 2016-13, Financial Instruments – Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instrument (“ASU 2016-13”). ASU 2016-13 replaces the incurred loss impairment methodology in current U.S. GAAP with a methodology that reflects expected credit losses and requires consideration of a broader range of reasonable and supportable information to inform credit loss estimates. ASU 2016-13 is effective for SEC small business filers for fiscal years beginning after December 15, 2022. The adoption of this standard is not expected to have a material impact on our condensed consolidated financial statements or related disclosures.
In December 2019, the FASB issued ASU 2019-12, “Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes” (“ASU 2019-12”), which simplifies the accounting for income taxes, eliminates certain exceptions within Accounting Standards Codification Topic 740, “Income Taxes” (“ASC 740”), and clarifies certain aspects of ASC 740 to promote consistency among reporting entities. We adopted this update effective October 1, 2021. The adoption of this standard did not have a material impact on our condensed consolidated financial statements or related disclosures.
As new accounting pronouncements are issued, we will adopt those that are applicable.
35
Table of Contents
Business Segments
The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells, and services flight guidance and cockpit display systems for OEMs and retrofit applications. Customers include various OEMs, commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers, government agencies, and foreign militaries. The Company currently derives the majority of its revenues from the sale of this equipment and related EDC services. Most of the Company’s sales, operating results and identifiable assets are generated in the United States. In fiscal years 2022, 2021 and 2020 net sales outside the United States amounted to $11.1 million, $8.4 million and $9.4 million, respectively.
Item 7A. Quantitative and qualitative disclosures about market risk.
The Company’s operations are exposed to market risks primarily as a result of changes in interest rates. The Company does not use derivative financial instruments for speculative or trading purposes. The Company’s exposure to market risk for changes in interest rates relates to its cash equivalents. The Company’s cash equivalents consist of funds invested in money market funds, which bear interest at a variable rate. The Company does not participate in interest rate hedging. A change in interest rates earned on the Company’s cash equivalents would impact interest income and cash flows but would not impact the fair market value of the underlying instruments. Assuming that the balances during fiscal 2022 were to remain constant and that the Company did not act to alter the existing interest rate sensitivity, a hypothetical 1% increase in variable interest rates would have affected interest income by approximately $88,000. This would result in a net impact on cash of approximately $88,000 for fiscal 2022.
Item 8. Financial statements and supplementary data.
The financial statements of Innovative Solutions and Support, Inc. listed in the index appearing under Item 8 herein are filed as part of this Report.
36
Table of Contents
Innovative Solutions and Support, Inc.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Page
Report of Independent Registered Public Accounting Firm PCAOB ID Number 248 38
Consolidated Balance Sheets 39
Consolidated Statements of Operations 40
Consolidated Statements of Shareholders’ Equity 41
Consolidated Statements of Cash Flows 42
Notes to Consolidated Financial Statements 43-60
37
Table of Contents
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
Board of Directors and Shareholders
Innovative Solutions & Support, Inc.
Opinion on the financial statements
We have audited the accompanying consolidated balance sheets of Innovative Solutions & Support, Inc. (a Pennsylvania corporation) and subsidiaries (the “Company”) as of September 30, 2022 and 2021, the related consolidated statements of operations, shareholders’ equity, and cash flows for each of the three years in the period ended September 30, 2022, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of September 30, 2022 and 2021, and the results of its operations and its cash flows for each of the three years in the period ended September 30, 2022, in conformity with accounting principles generally accepted in the United States of America.
Basis for opinion
These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.
Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical audit matters
Critical audit matters are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. We determined that there are no critical audit matters.
/s/ GRANT THORNTON LLP
We have served as the Company’s auditor since 2014.
Philadelphia, Pennsylvania
December 16, 2022
38
Table of Contents
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED BALANCE SHEETS
September 30, September 30,
ASSETS
Current assets
LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities
Commitments and contingencies (See Note 14)
Shareholders’ equity
The accompanying notes are an integral part of these statements.
39
Table of Contents
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
For the Fiscal Year Ended September 30,
Cost of sales:
Operating expenses:
Net income per common share:
Weighted average shares outstanding:
The accompanying notes are an integral part of these statements.
40
Table of Contents
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
(Accumulated
Additional Deficit)
Common Paid-In Retained Treasury
Stock Capital Earnings Stock Total
Share-based compensation — 17,337 — — 17,337
Share-based compensation — 181,350 — — 181,350
Exercise of stock options 5 17,005 — — 17,010
Share-based compensation — 166,617 — — 166,617
Issuance of stock to directors 27 173,298 — — 173,325
The accompanying notes are an integral part of these statements.
41
Table of Contents
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
For the Fiscal Year Ended September 30,
CASH FLOWS FROM OPERATING ACTIVITIES:
Share-based compensation expense
Gain on disposal of property and equipment (1,191,743) — —
Excess and obsolete inventory cost — (100,446) 66,511
(Increase) decrease in:
Other non-current assets — — (96,269)
Increase (decrease) in:
CASH FLOWS FROM INVESTING ACTIVITIES:
Proceeds from the sale of property and equipment 2,750,576 — —
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds from paycheck protection program — — 1,203,900
Repayment of paycheck protection program — — (1,203,900)
Dividend paid — (19,788,092) —
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION
Cash received from income tax refund — — 309,712
SUPPLEMENTAL DISCLOSURE OF NONCASH INFORMATION
Cashless exercise of stock options — — 1,635,000
Accrual of dividends payable — — 11,180,900
The accompanying notes are an integral part of these statements.
42
Table of Contents
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. Background
Innovative Solutions and Support, Inc. (the “Company,” “IS&S,” “we” or “us”) was incorporated in Pennsylvania on February 12, 1988. The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells, and services air data equipment, engine display systems, standby equipment, primary flight guidance and cockpit display systems for retrofit applications and original equipment manufacturers (“OEMs”). The Company supplies integrated Flight Management Systems (“FMS”), Flat Panel Display Systems (“FPDS”), FPDS with Autothrottle, air data equipment, Integrated Standby Units (“ISU”), ISU with Autothrottle and advanced GPS receivers that enable reduced carbon footprint navigation.
The Company has continued to position itself as a system integrator, which provides the Company with the capability and potential to generate more substantive orders over a broader product base. This strategy, as both a manufacturer and integrator, is designed to leverage the latest technologies developed for the computer and telecommunications industries into advanced and cost-effective solutions for the general aviation, commercial air transport, DoD/governmental, and foreign military markets. This approach, combined with the Company’s industry experience, is designed to enable IS&S to develop high-quality products and systems, to reduce product time to market, and to achieve cost advantages over products offered by its competitors. Customers include various OEMs, commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers, government agencies, and foreign militaries.
2. Concentrations
Major Customers and Products
In fiscal 2022, 2021 and 2020, the Company derived 58%, 59% and 63%, respectively, of total sales from five customers, although not all the same customers in each year. Accounts receivable and contract assets related to those top five customers was $3.3 million, $2.1 million and $3.4 million as of September 30, 2022, 2021 and 2020, respectively.
In fiscal year 2022, the three largest customers, Pilatus, ATSG and Textron accounted for 22%, 11% and 11% of total revenue, respectively. In fiscal year 2021, the two largest customers, Pilatus and Textron accounted for 20% and 17% of total revenue, respectively. In fiscal year 2020, the three largest customers, Pilatus, Dayton T. Brown, Inc., and Kalitta Air accounted for 33%, 12% and 10% of total revenue, respectively.
Flat panel sales were 98%, 88% and 80% of total sales in the years ended September 30, 2022, 2021 and 2020, respectively. Sales of air data systems and components were 2%, 12% and 20% of total sales for the years ended September 30, 2022, 2021 and 2020, respectively. Sales to government contractors and agencies accounted for approximately 21%, 18% and 32% of total sales during fiscal years 2022, 2021 and 2020, respectively. The government agency or general contractor typically retains the right to terminate the contract at any time at its convenience. Upon alteration or termination of these contracts, IS&S is typically entitled to an equitable adjustment to the contract price so that it would be compensated for delivered items and allowable costs incurred. Accordingly, because these contracts can be terminated, the Company cannot be assured that its backlog will result in sales.
Major Suppliers
The Company buys several of its components from sole source suppliers. Although there are a limited number of suppliers of particular components, management believes other suppliers could provide similar components on comparable terms.
During fiscal 2022 the Company had three suppliers that accounted for 33.7% of the Company’s total inventory related purchases. During fiscal 2021 the Company had one supplier that accounted for 14.9% of the Company’s total inventory related purchases.
43
Table of Contents
Concentration of Credit Risk
Financial instruments that potentially subject the Company to concentration of credit risk consist principally of cash balances and accounts receivable. The Company invests its excess cash where preservation of principal is the major consideration. Cash balances are maintained with two major banks. Balances on deposit with certain money market accounts and operating accounts may exceed the Federal Deposit Insurance Corporation limits. The Company’s customer base consists principally of companies within the aviation industry. The Company requests advance payments and/or letters of credit from customers that it considers to be credit risks.
3. Summary of Significant Accounting Policies
Principles of Consolidation
The Company’s condensed consolidated financial statements include the accounts of its wholly-owned subsidiaries. All intercompany balances and transactions have been eliminated in consolidation.
Impact of the COVID-19 Pandemic
The Company has not yet seen a material impact from the COVID-19 pandemic on its business, financial position, liquidity, or ability to service customers or maintain critical operations. However, some parts of the world are continuing to see a rise in COVID-19 cases and hospitalizations, and it is possible that new, more virulent strains or variants of COVID-19 may emerge and lead governments and private sectors to re-institute quarantine and trade restrictions, which could adversely impact market conditions. IS&S will continue to monitor the impact of the COVID-19 pandemic on its business, including how it has impacted and will impact the Company’s employees, customers, suppliers and distribution channels. The Company could face liquidity shortages, weaker product demand from its customers, disruptions in its supply chain, and/or staffing shortages in its workforce in the future due to the direct and indirect effects of the COVID-19 pandemic.
Use of Estimates
The financial statements of the Company have been prepared in accordance with accounting principles generally accepted in the United States of America, which require management to make estimates and assumptions that affect the amounts reported in the financial statements. Actual results could differ from those estimates. Estimates are used in accounting for, among other items, long term contracts, allowances for doubtful accounts, inventory obsolescence, product warranty cost liabilities, income taxes, engineering and material costs on EDC programs, percentage of completion on EDC contracts, recoverability of long-lived assets and contingencies. Estimates and assumptions are reviewed periodically and the effects of changes, if any, are reflected in the consolidated statements of operations in the period they are determined.
Cash and Cash Equivalents
Highly liquid investments, purchased with an original maturity of three months or less, are classified as cash equivalents. Cash equivalents at September 30, 2022 and 2021 consist of cash on deposit and cash invested in money market funds with financial institutions.
Inventory Valuation
Inventories are stated at the lower of cost (first-in, first-out) or net realizable value, net of write-downs for excess and obsolete inventory, and consist of the following:
September 30, September 30,
44
Table of Contents
Property and Equipment
Property and equipment are stated at cost. Depreciation is provided using an accelerated method over the estimated useful lives of the assets (the lesser of three to seven years or over the lease term), except for the manufacturing facility and the corporate airplanes, which are depreciated using the straight-line method over their estimated useful lives of thirty-nine years and ten years, respectively. Major additions and improvements are capitalized, while maintenance and repairs that do not improve or extend the life of assets are charged to expense as incurred.
Long-Lived Assets
The Company assesses the impairment of long-lived assets in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 360-10, “Property, Plant and Equipment.” This statement requires that long-lived assets be reviewed for impairment whenever events or changes in circumstances indicate the carrying amount of an asset may not be recoverable. In addition, long-lived assets to be disposed of should be reported at the lower of the carrying amount or fair value less cost to sell. The Company considers historical performance and future estimated results in its evaluation of potential impairment and then compares the carrying amount of the asset to estimated future cash flows expected to result from use of the asset. If the carrying amount of the asset exceeds the estimated expected undiscounted future cash flows, the Company measures the amount of the impairment by comparing the carrying amount of the asset to its fair value. The estimation of fair value is generally measured by discounting expected future cash flows. No impairment charges were recorded in fiscal years 2022, 2021 or 2020.
Revenue Recognition
The Company enters into sales arrangements with customers that, in general, provide for the Company to design, develop, manufacture and deliver large flat-panel display systems, flight information computers, autothrottles and advanced monitoring systems that measure and display critical flight information, including data relative to aircraft separation, airspeed, altitude, and engine and fuel data measurements.
Revenue from Contracts with Customers
The Company accounts for revenue in accordance with ASC 606, Revenue from Contracts with Customers (“ASC 606”). The core principle of ASC 606 is that an entity recognizes revenue when a customer obtains control of promised goods or services. The amount of revenue recognized reflects the consideration to which the Company expects to be entitled to receive in exchange for these goods or services. To achieve this core principle, the Company applies the following five steps:
1)Identify the contract with a customer
The Company’s contract with its customers typically is the form of a purchase order issued to the Company by its customers and, to a lesser degree, in the form of a purchase order issued in connection with a formal contract executed with a customer. For the purpose of accounting for revenue under ASC 606, a contract with a customer exists when (i) the Company enters into an enforceable contract with a customer that defines each party’s rights regarding the goods or services to be transferred and identifies the payment terms related to these goods or services, (ii) the contract has commercial substance and, (iii) the Company determines that collection of substantially all consideration for goods or services that are transferred is probable based on the customer’s intent and ability to pay the promised consideration. The Company applies judgment in determining the customer’s ability and intention to pay, which is based on a variety of factors including the customer’s historical payment experience or, in the case of a new customer, published credit and financial information pertaining to the customer.
45
Table of Contents
2)Identify the performance obligations in the contract
Performance obligations promised in a contract are identified based on the goods or services that will be transferred to the customer that are both capable of being distinct, whereby the customer can benefit from the good or service either on its own or together with other resources that are readily available from third parties or from the Company, and are distinct in the context of the contract, whereby the transfer of the goods or services is separately identifiable from other promises in the contract. Most of our revenue is derived from purchases under which we provide a specific product or service and, as a result, there is only one performance obligation. In the event that a contract includes multiple promised goods or services, such as an EDC contract which includes both engineering services and a resulting product shipment, the Company must apply judgment to determine whether promised goods or services are capable of being distinct in the context of the contract. In these cases, the Company considers whether the customer could, on its own, or together with other resources that are readily available from third parties, produce the physical product using only the output resulting from the Company’s completion of engineering services. If the customer cannot produce the physical product, then the promised goods or services are accounted for as a combined performance obligation.
3)Determine the transaction price
The transaction price is determined based on the consideration to which the Company will be entitled in exchange for transferring goods or services to the customer. To the extent the transaction price includes variable consideration, the Company estimates the amount of variable consideration that should be included in the transaction price utilizing either the expected value method or the most likely amount method depending on the nature of the variable consideration. Variable consideration is included in the transaction price if, in the Company’s judgment, it is probable that a significant future reversal of cumulative revenue under the contract will not occur.
4)Allocate the transaction price to performance obligations in the contract
If the contract contains a single performance obligation, the entire transaction price is allocated to the single performance obligation. The Company determines standalone selling price based on the price at which the performance obligation is sold separately. If the standalone selling price is not observable through past transactions, the Company estimates the standalone selling price by taking into account available information such as market conditions as well as the cost of the goods or services and the Company’s normal margins for similar performance obligations.
5)Recognize revenue when or as the Company satisfies a performance obligation
The Company satisfies performance obligations either over time or at a point in time as discussed in further detail below. Revenue is recognized at the time the related performance obligation is satisfied by transferring a promised good or service to a customer. Historically, the Company has also recognized revenue from EDC contracts and is recognized over time using an input measure (e.g., costs incurred to date relative to total estimated costs at completion) to measure progress. Contract costs include material, components and third-party avionics purchased from suppliers, direct labor, and overhead costs.
Contract Estimates
Accounting for performance obligations in long-term contracts that are satisfied over time involves the use of various techniques to estimate progress towards satisfaction of the performance obligation. The Company typically measures progress based on costs incurred compared to estimated total contract costs. Contract cost estimates are based on various assumptions to project the outcome of future events that often span more than a single year. These assumptions include the amount of labor and labor costs, the quantity and cost of raw materials used in the completion of the performance obligation, and the complexity of the work to be performed.
As a significant change in one or more of these estimates could affect the profitability of our contracts, we review and update our contract-related estimates regularly. We recognize adjustments in estimated profit on contracts under the cumulative catch-up method. Under this method, the impact of the adjustment on profit recorded to date is recognized in the period the adjustment is identified. Revenue and profit in future periods of contract performance is recognized using the adjusted estimate. If at any time the estimate of contract profitability indicates an anticipated loss on the contract, we recognize the total loss in the quarter it is identified.
The impact of adjustments in contract estimates on our operating earnings can be reflected in either operating costs and expenses or revenue. The aggregate impact of adjustments in contract estimates did not change our revenue and operating earnings (and diluted earnings per share) for the fiscal years ended September 30, 2022 and 2021. Therefore, no adjustment on any contract was material to our consolidated financial statements for the fiscal years ended September 30, 2022 and 2021.
46
Table of Contents
Contract Balances
Contract assets consist of the right to consideration in exchange for product offerings that we have transferred to a customer under the contract. Contract liabilities primarily relate to consideration received in advance of performance under the contract. The following table reflects the Company’s contract assets and liabilities:
Contract Contract
Assets Liabilities
Amount transferred to receivables from contract assets — —
Contract asset additions 162,742 —
Customer Service Revenue
The Company enters into sales arrangements with customers for the repair or upgrade of its various products that are not under warranty. The Company’s customer service revenue and cost of sales are included in product sales and product cost of sales, respectively, on the accompanying consolidated statements of operations. The Company’s customer service revenue and cost of sales for the fiscal years ended 2022, 2021 and 2020 are as follows:
For the Fiscal Year Ended September 30,
Lease Recognition