IRON US Equity☆

ITEM 1A.RISK FACTORS

Set forth below are the risks that we believe are material to our investors and they should be carefully considered. If any of the following risks and uncertainties actually occurs, our business, prospects, financial condition and results of operations could be materially and adversely affected. The risks described below are not intended to be exhaustive and other factors not presently known to us or that we currently believe are immaterial may affect our business, prospects, financial condition and results of operations if they occur. This section contains forward-looking statements. You should refer to the explanation of the qualifications and limitations on forward-looking statements beginning on page ii of this Annual Report on Form 10-K.

Risks Related to Our Limited Operating History, Financial Position and Capital Requirements

Our limited operating history may make it difficult for you to evaluate the success of our business to date and to assess our future viability.

We commenced operations in 2017 and are a clinical-stage biopharmaceutical company with a limited operating history. Biopharmaceutical product development is a highly speculative undertaking and involves a substantial degree of risk. Since our inception in October 2017, we have devoted substantially all of our efforts to organizing and staffing our company, business planning, capital raising, establishing and maintaining our intellectual property portfolio, building our pipeline of product candidates, conducting drug discovery activities, undertaking preclinical studies, conducting clinical trials, preparing for the potential commercialization of bitopertin, if approved, and providing general and administrative support for these operations. We have not yet demonstrated our ability to successfully develop any product candidate, obtain regulatory approvals, manufacture a commercial-scale product or arrange for a third party to do so on our behalf, or conduct sales and marketing activities necessary for successful product commercialization. Consequently, any predictions you make about our future success or viability may not be as accurate as they could be if we had a longer operating history or a history of successfully developing and commercializing products.

In addition, as our business grows, we may encounter unforeseen expenses, difficulties, complications, delays and other known and unknown factors. We will need to transition at some point from a company with a research and development focus to a company capable of supporting commercial activities. We may not be successful in such a transition.

We have incurred significant net losses since our inception and anticipate that we will continue to incur losses for the foreseeable future.

Our net losses were $212.2 million, $109.4 million and $76.4 million for the years ended December 31, 2025, 2024 and 2023, respectively. We had an accumulated deficit of $510.2 million as of December 31, 2025. Substantially all of our net losses have resulted from costs incurred in connection with our research and development programs and from selling, general and administrative costs associated with our operations. We expect our research and development expenses to continue to increase significantly in connection with the commencement and continuation of clinical trials of our product candidates. In addition, if we obtain regulatory approval for our product candidates, we will incur significant sales, marketing and manufacturing expenses. We also will continue to incur additional costs associated with operating as a public company and expect to continue to incur significant and increasing operating losses over the next several years and for the foreseeable future. Because of the numerous risks and uncertainties associated with developing pharmaceutical products, we are unable to predict the extent of any future losses or when we will become profitable, if at all. Even if we do become profitable, we may not be able to sustain or increase our profitability on a quarterly or annual basis.

The amount of our future losses is uncertain and our quarterly and annual operating results may fluctuate significantly in the future due to a variety of factors, many of which are outside of our control and may be difficult to predict, including the following:

•

the timing and success or failure of preclinical studies and clinical trials for our product candidates or competing product candidates, or any other change in the competitive landscape of our industry, including consolidation among our competitors or partners;

•

our ability to successfully open clinical trial sites and recruit and retain subjects for clinical trials and any delays caused by difficulties in such efforts;

•

our ability to obtain regulatory approval for our product candidates, and the timing and scope of any such approvals we may receive;

•

the timing and cost of, and level of investment in, research and development activities relating to our product candidates, which may change from time to time;

•

the cost of manufacturing our product candidates and products, should they receive regulatory approval, which may vary depending on the quantity of production and the terms of our agreements with manufacturers;

•

our ability to attract, hire and retain qualified personnel;

46

•

expenditures that we will or may incur to develop additional product candidates;

•

the level of demand for our products should they receive regulatory approval, which may vary significantly;

•

the risk/benefit profile, cost and reimbursement policies with respect to our product candidates, if approved, and existing and potential future therapeutics that compete with our product candidates;

•

the changing and volatile U.S. and global economic environments; and

•

future accounting pronouncements or changes in our accounting policies.

The cumulative effects of these factors could result in large fluctuations and unpredictability in our quarterly and annual operating results. As a result, comparing our operating results on a period-to-period basis may not be meaningful. This variability and unpredictability could also result in us failing to meet the expectations of industry or financial analysts or investors for any period. If our revenue or operating results fall below the expectations of analysts or investors or below any forecasts we may provide to the market, or if the forecasts we provide to the market are below the expectations of analysts or investors, the price of our common stock could decline substantially. Such a stock price decline could occur even if we have met any previously publicly stated guidance we may provide.

We have no products approved for commercial sale and have not generated any revenue from product sales.

Our ability to become profitable depends upon our ability to generate revenue. To date, we have not generated collaborative revenue from our product candidates and have not generated revenue from product sales. We do not expect to generate significant revenue unless and until we obtain regulatory approval of, and begin to sell, one or more of our product candidates, which may take longer than we anticipate, or may not occur at all. Our ability to generate revenue depends on a number of factors, including, but not limited to, our ability to:

•

successfully complete our ongoing and planned preclinical studies for our current and future product candidates;

•

timely file and receive acceptance of our Investigational New Drug applications, or INDs, in order to commence our planned clinical trials or future clinical trials;

•

successfully enroll subjects in and complete, our ongoing and planned clinical trials;

•

initiate and successfully complete all safety and efficacy studies necessary to obtain U.S. and foreign regulatory approval for our product candidates;

•

successfully address the prevalence, duration and severity of potential side effects or other safety issues experienced with our product candidates, if any;

•

timely file New Drug Applications, or NDAs, and Biologics License Applications, or BLAs, and receive regulatory approvals for our product candidates from the U.S. Food and Drug Administration, or the FDA, and comparable foreign regulatory authorities;

•

establish and maintain clinical and commercial manufacturing capabilities or make arrangements with third-party manufacturers for clinical supply and commercial manufacturing;

•

obtain and maintain patent and trade secret protection or regulatory exclusivity for our product candidates;

•

launch commercial sales of our products, if and when approved, whether alone or in collaboration with others;

•

obtain and maintain acceptance of our products, if and when approved, by patients, the medical community and third-party payors;

•

position our product candidates to effectively compete with other therapies;

•

obtain and maintain healthcare coverage and adequate reimbursement, if and when our product candidates are approved;

•

enforce and defend intellectual property rights and claims; and

•

maintain a continued acceptable safety profile of our products following approval.

If we do not achieve one or more of these factors in a timely manner or at all, we could experience significant delays or an inability to successfully commercialize our product candidates, which would materially harm our business. If we do not receive regulatory approvals for our product candidates, we may not be able to continue our operations.

47

Our existing and any future indebtedness could adversely affect our ability to operate our business.

In November 2024, we entered into a Loan and Security Agreement, or the Hercules Loan Agreement, with the lenders party thereto, or the Lenders, and Hercules Capital, Inc., as administrative agent and collateral agent, or the Agent. The Hercules Loan Agreement provides for up to $200.0 million of senior secured term loans, or the Term Loan, available to us in multiple tranches. The Term Loan will mature on December 1, 2029. Our obligations under the Hercules Loan Agreement are secured, subject to customary permitted liens and other agreed-upon exceptions, by a first-priority perfected security interest in all of our tangible and intangible assets, other than intellectual property.

The Hercules Loan Agreement contains customary affirmative and negative covenants that could prevent us from taking certain actions without the consent of the Lenders. These covenants may limit our flexibility in operating our business and our ability to take actions that might be advantageous to us and our stockholders. Affirmative covenants include, among others, a financial covenant requiring us to maintain a minimum amount of qualified cash. Negative covenants include, among others: restrictions on transferring any part of our business or intellectual property; incurring additional indebtedness; engaging in mergers or acquisitions; paying dividends or making other distributions; making investments; and creating other liens on our assets, in each case subject to customary exceptions.

The Hercules Loan Agreement also contains customary events of default, including the occurrence of a Material Adverse Effect (as defined in the Hercules Loan Agreement), and failure to make payments when due or comply with other covenants therein. We intend to satisfy our current and future debt service obligations with our then-existing cash and cash equivalents. However, we may not have sufficient funds, and may be unable to arrange for additional financing, to pay the amounts due under Hercules Loan Agreement or any other debt instruments. Upon the occurrence and continuance of an event of default, the Lenders may accelerate all of our repayment obligations and take control of our pledged assets, potentially requiring us to renegotiate our agreement on terms less favorable to us or to immediately cease operations. Any declaration by the Lenders of an event of default would therefore significantly harm our business and prospects and could cause the price of our common stock to decline.

If we raise any additional debt financing, the terms of such additional debt could further restrict our operating and financial flexibility.

We may need to raise substantial additional funding. If we are unable to raise capital when needed or on terms acceptable to us, we may be forced to delay, reduce or eliminate some of our product development programs or commercialization efforts.

The development of pharmaceutical products is capital-intensive. We are currently advancing our hematologic disease programs through preclinical and clinical development. We expect our expenses to significantly increase in connection with our ongoing activities, particularly as we continue the research and development of, initiate and complete clinical trials of, and seek regulatory approval for, our product candidates. In addition, if we obtain regulatory approval for any of our product candidates, we expect to incur significant commercialization expenses related to product sales, marketing, manufacturing and distribution. We may also need to raise additional funds sooner if we choose to pursue additional indications and/or geographies for our current or future product candidates or otherwise expand more rapidly than presently anticipated. Furthermore, we expect to continue to incur costs associated with operating as a public company. Accordingly, we may need to obtain substantial additional funding in connection with our continuing operations. If we are unable to raise capital when needed or on attractive terms, we may be forced to delay, reduce or eliminate certain of our research and development programs or future commercialization efforts.

We believe that our cash, cash equivalents and marketable securities will be sufficient to fund our current operating and capital expenditure plans and our debt service obligations into 2029, without taking into account any potential net cash inflows from bitopertin or any other marketed product, if approved during such period. However, we have based this estimate on assumptions that may prove to be wrong, and we could exhaust our available capital resources sooner than expected. Our future capital requirements will depend on and could increase significantly as a result of many factors, including:

•

the timing and progress of preclinical and clinical development activities;

•

the number and scope of preclinical and clinical programs we decide to pursue;

•

our ability to raise additional funds to the extent necessary to complete clinical development of and commercialize our product candidates;

•

our ability to establish new and maintain existing licensing or collaboration arrangements and the progress of the development efforts of third parties with whom we may enter into such arrangements;

•

our ability to maintain our current research and development programs and to establish new programs;

•

the successful initiation, enrollment and completion of clinical trials with safety, tolerability and efficacy profiles that are satisfactory to the FDA or any comparable foreign regulatory authority;

•

the receipt and related terms of regulatory approvals from applicable regulatory authorities for any product candidates;

48

•

the availability of raw materials for use in production of our product candidates;

•

the terms of agreements with third-party manufacturers for supply of product candidate components for our clinical trials;

•

our ability to obtain and maintain patents, trade secret protection and regulatory exclusivity, both in the United States and internationally;

•

our ability to protect our other rights in our intellectual property portfolio;

•

commercializing product candidates, if and when approved, whether alone or in collaboration with others; and

•

obtaining and maintaining third-party insurance coverage and adequate reimbursement for any approved products.

Identifying potential product candidates and conducting preclinical development testing and clinical trials is a time-consuming, expensive and uncertain process that takes years to complete, and we may never generate the necessary data or results required to obtain regulatory approval and achieve product sales. In addition, our product candidates, if approved, may not achieve commercial success. Our commercial revenue, if any, will be derived from sales of products that may take longer than we anticipate to become commercially available, if they become commercially available at all. Accordingly, we may need to continue to rely on additional financing to achieve our business objectives.

Any additional fundraising efforts may divert our management from their day-to-day activities, which may adversely affect our ability to develop and commercialize our product candidates. Disruptions in the financial markets in general may make equity and debt financing more difficult to obtain and may have a material adverse effect on our ability to meet our fundraising needs. We cannot guarantee that future financing will be available in sufficient amounts or on terms acceptable to us, if at all.

If we are unable to obtain funding on a timely basis or on acceptable terms, we may be required to significantly curtail, delay or discontinue one or more of our research or development programs or the commercialization of any product that has received regulatory approval or be unable to expand our operations or otherwise capitalize on our business opportunities as desired, which could materially affect our business, financial condition and results of operations.

Raising additional capital may cause dilution to our stockholders, restrict our operations or require us to relinquish rights to our technologies or product candidates.

Until such time, if ever, we can generate substantial product revenue, we expect to finance our cash needs through a combination of private and public equity offerings, debt financings, collaborations, strategic alliances and licensing arrangements. Other than up to $80.0 million of additional advances that may be drawn at our option under the Hercules Loan Agreement, we do not have any committed external source of funds. The terms of any financing may adversely affect the holdings or the rights of our stockholders and the issuance of additional securities, whether equity or debt, by us, or the possibility of such issuance, may cause the market price of our shares to decline. To the extent that we raise additional capital through the sale of common stock or securities convertible or exchangeable into common stock, your ownership interest will be diluted, and the terms of those securities may include liquidation or other preferences that may materially adversely affect your rights as a common stockholder. Additional debt financing, if available, would increase our fixed payment obligations and may involve agreements that include covenants limiting or restricting our ability to take specific actions, such as incurring additional debt, acquiring, selling or licensing intellectual property rights, and making capital expenditures, declaring dividends or other operating restrictions that could adversely impact our ability to conduct our business. We could also be required to meet certain milestones in connection with debt financing and the failure to achieve such milestones by certain dates may force us to relinquish rights to some of our technologies or product candidates or otherwise agree to terms unfavorable to us which could have a material adverse effect on our business, operating results and prospects.

We also could be required to seek funds through arrangements with collaborators or otherwise at an earlier stage than otherwise would be desirable. If we raise funds through collaborations, strategic alliances or licensing arrangements with third parties, we may have to relinquish valuable rights to our intellectual property, future revenue streams, research programs or product candidates, grant licenses on terms that may not be favorable to us or grant rights to develop and market product candidates that we would otherwise prefer to develop and market ourself, any of which may have a material adverse effect on our business, operating results and prospects.

49

Risks Related to the Discovery and Development of Our Product Candidates

We have not yet progressed any product candidates through a Phase 3 clinical trial and may be unable to successfully complete any additional clinical trials for any product candidates we develop. Certain of our programs are still in preclinical development and may never advance to clinical development.

We currently have only three product candidates in clinical development, none of which has yet progressed through a completed Phase 3 clinical trial. As such, we have not yet demonstrated our ability to successfully complete large-scale, pivotal clinical trials, obtain regulatory approvals, manufacture a commercial scale product or arrange for a third party to do so on our behalf or conduct sales and marketing activities necessary for successful commercialization. The majority of our programs are still in preclinical and early to mid-stage clinical development. Our clinical programs may not advance to the next stage of clinical development, and our preclinical programs may never advance to clinical development or through clinical development, as applicable. We may not initiate any clinical trial of our product candidates until we have submitted an IND to the FDA or comparable submissions with equivalent regulatory authorities and received regulatory clearance. We may not be able to submit INDs or other regulatory filings for any of our product candidates on the timelines we expect, if at all. For example, we may experience manufacturing delays or other delays with IND-enabling studies. Moreover, we cannot be sure that submission of regulatory filings with the FDA or other regulatory authorities will result in such regulatory authorities allowing clinical trials to begin on a timely basis or at all, or that, once begun, such trials will be completed on schedule, if at all, or that issues will not arise that require us to revise, postpone, suspend or terminate our clinical trials. For example, we filed an IND in April 2022 with the FDA to initiate the AURORA Phase 2 trial of bitopertin in EPP patients, but the FDA initially placed the initiation of this trial on clinical hold; we received clearance to initiate the study in July 2022 after the study design was finalized with the FDA, and we initiated the study in October 2022. Commencing any of our clinical trials is subject to finalizing the trial design based on discussions with the FDA and other regulatory authorities. Any guidance we receive from the FDA or other regulatory authorities is subject to change. The outcomes of our interactions with these regulatory authorities, including interactions critical to successfully advancing through the different phases of clinical development, such as end-of-phase 2 meetings with the FDA, may be difficult to predict ahead of time. In particular, regulatory authorities could change their position, including on the acceptability of our trial designs or the clinical endpoints selected, which may require us to complete additional clinical trials or result in the composition of stricter approval conditions than currently expected. Our ability to successfully advance from preclinical studies through the different phases of clinical development is therefore subject to significant uncertainty. Successful completion of our clinical trials is a prerequisite to submitting an NDA or a BLA to the FDA, a Marketing Authorisation Application, or MAA, to the European Medicines Agency, or EMA, or other marketing applications to regulatory authorities in other jurisdictions, for each product candidate and, consequently, the regulatory approval of each product candidate.

A single well-controlled clinical trial may not be sufficient for approval. Historically, the FDA has generally required two well-controlled clinical trials to support registration of a new drug or biologic, although exceptions have been made in cases of a severe disease with few treatment options, and in principle this exception may appear applicable to many of the diseases that we seek to treat, such as EPP, XLP, anemia of MF, DBA and others. More recently, the FDA has indicated that its default position will be that one well-controlled clinical trial, combined with confirmatory evidence, will serve as the basis of marketing authorization of novel products. Nonetheless, the FDA and other regulators may always require additional clinical trials to support regulatory approval.

If we are required to conduct additional preclinical studies or clinical trials or other testing of our product candidates beyond those that are currently contemplated, if we are unable to successfully complete clinical trials of our product candidates or other testing, if the results of these trials or tests are not positive or are only modestly positive or if there are safety concerns, we may:

•

be delayed in obtaining regulatory approval for our product candidates;

•

not obtain regulatory approval at all;

•

obtain regulatory approval for indications or patient populations that are not as broad as intended or desired;

•

continue to be subject to post-marketing testing requirements; or

•

experience having the product removed from the market after obtaining regulatory approval.

Our programs are focused on the development of therapeutics for patients with hematologic diseases, which is a rapidly evolving area of science, and the approach we are taking to discover and develop product candidates is novel and may never lead to approved or marketable products.

The discovery and development of therapeutics for patients with hematologic diseases is an emerging field, and the scientific discoveries that form the basis for our efforts to discover and develop product candidates are relatively new. The scientific evidence to support the feasibility of developing product candidates based on these discoveries is both preliminary and limited. Although we believe, based on our preclinical work and clinical results to date, that our programs have the potential to provide disease-modifying therapies, future clinical results may not confirm this hypothesis or may only confirm it for certain alterations or certain indications. The patient populations for our product candidates are limited to those with specific hematologic diseases. We cannot be certain that the patient populations for each specific disease will be large enough to allow us to successfully obtain approval for and

50

commercialize our product candidates and achieve profitability.

Clinical development involves a lengthy and expensive process, with an uncertain outcome.

Our preclinical studies and future and ongoing clinical trials may not be successful. Currently, the majority of our programs are in preclinical and early to mid-stage clinical development. It is impossible to know when or if any of our product candidates will prove effective and safe in humans or will receive regulatory approval. Before obtaining regulatory approval from regulatory authorities for the sale of any product candidate, we must complete preclinical studies and then conduct extensive clinical trials to demonstrate the safety and efficacy of our product candidates or the safety, purity and potency of our biological product candidates in humans. There is no guarantee that our product candidates will advance in accordance with the timelines we anticipate, if at all. Clinical testing is expensive, difficult to design and implement, can take many years to complete and outcomes are uncertain. A failure of one or more clinical trials can occur at any stage of testing. The outcome of preclinical development testing and early clinical trials may not be predictive of the success of later clinical trials, and interim, top-line, initial or preliminary results of a clinical trial do not necessarily predict final results. Moreover, preclinical and clinical data are often susceptible to varying interpretations and analyses, and many companies that have believed their product candidates performed satisfactorily in preclinical studies and clinical trials have nonetheless failed to obtain regulatory approval of their product candidates. Our preclinical studies and future and ongoing clinical trials may not be successful.

Additionally, some of the clinical trials we conduct, such as our completed BEACON Phase 2 clinical trial of bitopertin, our ongoing RALLY-MF Phase 2 clinical trial of DISC-0974, and our ongoing clinical trials of DISC-3405, may be open-label in study design and may be conducted at a limited number of clinical sites on a limited number of patients. An “open-label” clinical trial is one where both the patient and investigator know whether the patient is receiving the investigational product candidate or either an existing approved drug or placebo. Most typically, open-label clinical trials test only the investigational product candidate and sometimes may do so at different dose levels. Open-label clinical trials are subject to various limitations that may exaggerate any therapeutic effect as patients in open-label clinical trials are aware when they are receiving treatment. Open-label clinical trials may be subject to a “patient bias” where patients perceive their symptoms to have improved merely due to their awareness of receiving an experimental treatment. In addition, open-label clinical trials may be subject to an “investigator bias” where those assessing and reviewing the physiological outcomes of the clinical trials are aware of which patients have received treatment and may interpret the information of the treated group more favorably given this knowledge. The results from an open-label clinical trial may not be predictive of future clinical trial results when studied in a controlled environment with a placebo or active control.

In May 2021, we entered into a license agreement with Roche, or the Roche Agreement, pursuant to which, among other things, Roche granted us an exclusive and sublicensable (subject to Roche’s consent, except with respect to affiliates) worldwide license under certain of Roche’s patent rights and know-how to develop and commercialize bitopertin. Although bitopertin was originally evaluated by Roche in over 4,000 individuals, Roche did not evaluate bitopertin in EPP or XLP, so the safety data generated from Roche’s clinical trials of bitopertin may not be predictive or indicative of the results of our clinical trials. We may face similar challenges with respect to our other product candidates, for which preclinical results or prior clinical trial results may not be indicative or predictive of future clinical trial results.

Because we are developing some of our product candidates for the treatment of diseases in which there is little clinical experience and, in some cases, using new endpoints or methodologies, the FDA or other regulatory authorities may not consider the endpoints of our clinical trials to predict or provide clinically meaningful results.

Many of our product candidates are designed to treat diseases for which there are few available therapeutic options. For example, in the United States there are currently no therapies approved to treat anemia of MF and there is only one approved therapy to treat EPP. As a result, the design and conduct of clinical trials of product candidates for the treatment of these diseases may take longer, be more costly or be less effective as part of the novelty of development in these diseases. In some cases, we may use new or novel endpoints or methodologies. The FDA or other regulatory authorities may not consider the endpoints of our clinical trials to be validated or clinically meaningful and we may need to conduct proof-of-concept studies or additional work to refine our endpoints and inform the design of future studies before initiating pivotal studies of our product candidates. Even if applicable regulatory authorities do not object to our proposed endpoints in an earlier stage clinical trial, such regulatory authorities may require evaluation of additional or different clinical endpoints in later-stage clinical trials.

Even if the FDA does find our clinical trial success criteria to be sufficiently supported and clinically meaningful at the time, we may not achieve the pre-specified endpoint to a degree of statistical significance in any pivotal or other clinical trials we may conduct for our product candidates. Further, even if we do achieve the pre-specified criteria, our trials may produce results that are unpredictable or inconsistent with the results of the more traditional efficacy endpoints in the trial. For example, in the Complete Response Letter, or CRL, that the FDA issued in February 2026 with respect to our NDA for accelerated approval of bitopertin in EPP and XLP, the FDA agreed that clinical data from our AURORA and BEACON clinical trials provided sufficient evidence that bitopertin significantly lowers whole blood metal-free PPIX, but concluded that the trials did not show evidence of association between percent change in PPIX and sunlight exposure-based endpoints as measured in the trials. As such, the FDA determined that there is uncertainty regarding whether bitopertin’s effect on PPIX is reasonably likely to predict clinical benefit, despite the

51

strong mechanistic and biological plausibility supporting the use of the PPIX biomarker in protoporphyria. As a result, the FDA did not approve our NDA and indicated instead that we would need to provide evidence of clinical benefit from an additional trial, such as our ongoing APOLLO trial, to support a potential traditional approval. The FDA also could change its view or give overriding weight to other efficacy endpoints over a primary endpoint, even if we achieve statistically significant results on that primary endpoint, if for example we do not do so on our secondary efficacy endpoints. The FDA also weighs the benefits of a product candidate against its risks and the FDA may view the efficacy results in the context of safety as not being supportive of approval. Other regulatory authorities in Europe and other countries may make similar findings with respect to these endpoints.

Interim, top-line, initial and preliminary data from our clinical trials that we announce or publish from time to time may change as more patient data become available and are subject to confirmation, audit and verification procedures that could result in material changes in the final data.

From time to time, we may publicly disclose interim, top-line, initial or preliminary data from our clinical trials, which is based on a preliminary analysis of then-available data, and the results and related findings and conclusions are subject to change following a more comprehensive review of the data. For example, we announced initial data from our RALLY-MF Phase 2 DISC-0974 trial in patients with anemia of MF in December 2025. We also may make assumptions, estimations, calculations and conclusions as part of our analyses of data, and may not have received or had the opportunity to fully and carefully evaluate all data. As a result, the interim, top-line, initial or preliminary results that we report may differ from future results of the same trials, or different conclusions or considerations may qualify such results, once additional data have been received and fully evaluated. Interim, top-line, initial and preliminary data from clinical trials are subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. Interim, top-line, initial and preliminary data also remain subject to audit and verification procedures that may result in the final data being materially different from the interim, top-line, initial or preliminary data we previously published. As a result, interim, top-line, initial and preliminary data should be viewed with caution until the final data are available. Adverse differences between interim, top-line, initial or preliminary data and final data could significantly harm our business prospects and may cause the price of our common stock to fluctuate or decline.

Further, regulatory agencies and others, may not accept or agree with our assumptions, estimates, calculations, conclusions or analyses or may interpret or weigh the importance of data differently, which could adversely impact the potential of the particular program, the likelihood of obtaining regulatory approval of the particular product candidate, commercialization of any approved product and the business prospects of the company in general. In addition, the information we choose to publicly disclose regarding a particular study or clinical trial is derived from information that is typically extensive, and you or others may not agree with what we determine is material or otherwise appropriate information to include in our disclosure.

If the interim, top-line, initial or preliminary data that we report differs from actual results, or if regulatory authorities or others, disagree with the conclusions reached, our ability to obtain approval for, and commercialize, our product candidates may be significantly impaired, which could materially harm our business, operating results, prospects or financial condition.

We may incur additional costs or experience delays in initiating or completing, or ultimately be unable to complete, the development and commercialization of our product candidates.

We may experience delays in initiating or completing our preclinical studies or clinical trials, including as a result of delays in obtaining, or failure to obtain, the FDA’s authorization to initiate clinical trials under future INDs. Additionally, we cannot be certain that preclinical studies or clinical trials for our product candidates will not require redesign, will enroll an adequate number of subjects on time, or will be completed on schedule, if at all. We may experience numerous unforeseen events during, or as a result of, preclinical studies and clinical trials that could delay or prevent our ability to receive regulatory authorizations, regulatory approval or commercialize our product candidates, including:

•

we may receive feedback from regulatory authorities that requires us to modify the design or implementation of our preclinical studies or clinical trials or to delay or terminate a clinical trial;

•

regulators or institutional review boards, or IRBs, or ethics committees may delay or may not authorize us or our investigators to commence a clinical trial or conduct a clinical trial at a prospective trial site;

•

we may experience delays in reaching, or fail to reach, agreement on acceptable terms with prospective trial sites and prospective clinical research organizations, or CROs, the terms of which can be subject to extensive negotiation and may vary significantly among different CROs and trial sites;

•

preclinical studies or clinical trials of our product candidates may fail to show safety or efficacy or otherwise produce negative or inconclusive results, and we may decide, or regulators may require us, to conduct additional preclinical studies or clinical trials, or we may decide to abandon product research or development programs;

•

preclinical studies or clinical trials of our product candidates may not produce differentiated or clinically significant results across indications;

52

•

the number of patients required for clinical trials of our product candidates may be larger than anticipated, enrollment in these clinical trials may be slower than anticipated or participants may drop out of these clinical trials or fail to return for post-treatment follow-up at a higher rate than anticipated;

•

our third-party contractors may fail to comply with regulatory requirements, fail to maintain adequate quality controls, be unable to provide us with sufficient product supply to conduct or complete preclinical studies or clinical trials, fail to meet their contractual obligations to us in a timely manner, or at all, or may deviate from the clinical trial protocol or drop out of the trial, which may require that we add new clinical trial sites or investigators;

•

we may elect to, or regulators or IRBs or ethics committees may require us or our investigators to, suspend or terminate clinical research for various reasons, including noncompliance with regulatory requirements or a finding that the participants in our clinical trials are being exposed to unacceptable health risks;

•

the cost of clinical trials of our product candidates may be greater than anticipated;

•

the supply or quality of our product candidates or other materials necessary to conduct clinical trials of our product candidates may be insufficient or inadequate, and any transfer of manufacturing activities may require unforeseen manufacturing or formulation changes;

•

our product candidates may have undesirable side effects or other unexpected characteristics, causing us, regulators or IRBs or ethics committees to suspend or terminate the trials, or reports may arise from preclinical or clinical testing of other hematologic disease therapies that raise safety or efficacy concerns about our product candidates;

•

any future collaborators may conduct clinical trials in ways they view as advantageous to them but that are suboptimal for us; and

•

regulators may revise the requirements for approving our product candidates, or such requirements may not be as anticipated.

We could encounter delays if a clinical trial is suspended or terminated by us, by the IRBs or ethics committees of the institutions at which such trials are being conducted or by the FDA or other regulatory authorities, or if the Data Safety Monitoring Board, or DSMB, for such trial recommends suspension or termination of the trial. Such authorities may impose or recommend such a suspension or termination or clinical hold due to a number of factors, including failure to conduct the clinical trial in accordance with regulatory requirements or our clinical protocols, adverse findings upon an inspection of the clinical trial operations or trial site by the FDA or other regulatory authorities, unforeseen safety issues or adverse side effects, failure to demonstrate a benefit from using a product, changes in governmental regulations or administrative actions or lack of adequate funding to continue the clinical trial. For example, we filed an IND in April 2022 with the FDA to initiate the AURORA Phase 2 trial of bitopertin in EPP patients, but the FDA initially placed the initiation of this trial on clinical hold; we received clearance to initiate the study in July 2022 after the study design was finalized with the FDA and initiated the study in October 2022. Many of the factors that cause, or lead to, a delay in the commencement or completion of clinical trials may also ultimately lead to the denial of regulatory approval of our product candidates. Further, the FDA may disagree with our clinical trial design or our interpretation of data from clinical trials or may change the requirements for approval even after it has reviewed and commented on the design for our clinical trials.

Moreover, principal investigators for our current and future clinical trials may serve as scientific advisors or consultants to us from time to time and receive compensation in connection with such services. Under certain circumstances, we may be required to report some of these relationships to the FDA or comparable foreign regulatory authorities. The FDA or comparable foreign regulatory authority may conclude that a financial relationship between us and a principal investigator has created a conflict of interest or otherwise affected the interpretation of the trial. The FDA or comparable foreign regulatory authority may therefore question the integrity of the data generated at the applicable clinical trial site, and the utility of the clinical trial itself may be jeopardized. This could result in a delay in approval, or rejection, of our marketing applications by the FDA or comparable foreign regulatory authority, as the case may be, and may ultimately lead to the denial of regulatory approval of one or more of our product candidates.

Our product development costs will also increase if we experience delays in testing or regulatory approvals. We do not know whether any of our future clinical trials will begin as planned, or whether any of our current or future clinical trials will need to be restructured or will be completed on schedule, if at all. Significant preclinical study or clinical trial delays also could shorten any periods during which we may have the exclusive right to commercialize our product candidates or allow our competitors to bring products to market before we do, which would impair our ability to successfully commercialize our product candidates and may significantly harm our business, operating results, financial condition and prospects.

If we experience delays or difficulties in the enrollment of patients in clinical trials, our receipt of necessary regulatory approvals could be delayed or prevented.

We may not be able to initiate or continue clinical trials for our product candidates if we are unable to locate and enroll a sufficient number of eligible patients to participate in these trials as required by the FDA or comparable foreign regulatory authorities, or as

53

needed to provide appropriate statistical power for a given trial. In particular, because we are focused on patients with specific rare hematologic diseases for the development of our product candidates, our ability to enroll eligible patients may be limited or may result in slower enrollment than we anticipate.

We may experience difficulties with identifying specific patient populations for any defined trial cohorts. The patient eligibility criteria defined in our trial protocols may limit the patient populations eligible for our clinical trials. We will also rely on the willingness and ability of clinicians to screen their patients, such as for specific genetic hematologic conditions, to indicate which patients may be eligible for enrollment in our clinical trials.

In addition, some of our competitors have ongoing clinical trials for product candidates that are intended to treat the same indications as our product candidates, and patients who would otherwise be eligible for our clinical trials may choose instead to enroll in clinical trials of our competitors’ product candidates.

Additionally, the process of finding patients may prove costly. We also may not be able to identify, recruit or enroll a sufficient number of patients to complete our clinical trials because of the small patient populations with rare hematologic diseases, the perceived risks and benefits of the product candidates under study, the availability and efficacy of competing therapies and clinical trials, the proximity and availability of clinical trial sites for prospective patients, and the patient referral practices of physicians. If patients are unwilling to participate in our studies for any reason, the timeline for recruiting patients, conducting studies and obtaining regulatory approval of potential products may be delayed.

Patient enrollment may be affected by other factors, including:

•

the severity of the disease under investigation;

•

the efforts to obtain and maintain patient consents and facilitate timely enrollment in clinical trials;

•

the ability to monitor patients adequately during and after treatment;

•

the risk that patients enrolled in clinical trials will drop out of the clinical trials before clinical trial completion;

•

the ability to recruit clinical trial investigators with the appropriate competencies and experience;

•

reporting of the preliminary results of any of our clinical trials; and

•

factors we may not be able to control, including the impacts of any public health crises, that may limit patients, principal investigators or staff or clinical site availability.

Results from early preclinical studies and clinical trials of our programs and product candidates are not necessarily predictive of the results of later preclinical studies and clinical trials of our programs and product candidates. If we cannot replicate the results from earlier preclinical studies and clinical trials of our programs and product candidates in our later preclinical studies and clinical trials, we may be unable to successfully develop, obtain regulatory approval for and commercialize our product candidates.

Any results from early preclinical studies and clinical trials of bitopertin, DISC-0974, DISC-0998, DISC-3405 or our other product candidates or programs may not necessarily be predictive of the results from later preclinical studies and clinical trials. For example, we previously announced positive data from our Phase 2 BEACON and AURORA clinical trials of bitopertin in patients with EPP, but there can be no assurance that our Phase 3 APOLLO clinical trial of bitopertin in patients with EPP will be successful or that the results of our APOLLO clinical trial will support a traditional approval of bitopertin for EPP. In addition, we previously announced positive initial data from our RALLY-MF Phase 2 clinical trial of DISC-0974 in patients with anemia of MF. However, there can be no assurance that DISC-0974 will achieve the desired effects in this indication. Further, we announced positive results from a Phase 1 clinical trial of DISC-3405 in healthy adult volunteers in December 2024 and June 2025, which may not be indicative or predictive of future clinical trial results. Similarly, even if we are able to complete our planned preclinical studies and clinical trials of our product candidates according to our current development timeline, the results from such preclinical studies and clinical trials of our product candidates may not be replicated in subsequent preclinical studies or clinical trial results.

Many companies in the biopharmaceutical and biotechnology industries have suffered significant setbacks in late-stage clinical trials after achieving positive results in early-stage development, and we cannot be certain that we will not face similar setbacks. These setbacks have been caused by, among other things, preclinical findings made while clinical trials were underway, or safety or efficacy observations made in preclinical studies and clinical trials, including previously unreported adverse events. Moreover, preclinical and clinical data are often susceptible to varying interpretations and analyses and many companies that believed their product candidates performed satisfactorily in preclinical studies and clinical trials nonetheless failed to obtain regulatory approval.

54

Our clinical trials or those of our future collaborators may reveal significant adverse events not seen in prior preclinical studies or clinical trials and may result in a safety profile that could inhibit regulatory approval or market acceptance of any of our product candidates.

Before obtaining regulatory approvals for the commercial sale of any products, we must demonstrate through lengthy, complex and expensive preclinical studies and clinical trials that our product candidates regulated as drugs are safe and effective and our product candidates regulated as biologics are safe, pure and potent for use in each target indication. Clinical testing is expensive and can take many years to complete, and outcomes are inherently uncertain. Failure can occur at any time during the clinical trial process. Because the majority of our programs and product candidates are in an early or intermediate stage of development, there is a high risk of failure, and we may never succeed in developing any marketable products. There is typically an extremely high rate of attrition from the failure of product candidates proceeding through clinical trials. Product candidates in later stages of clinical trials also may fail to show the desired safety and efficacy profile despite having progressed through preclinical studies and initial clinical trials. For example, Roche had previously developed bitopertin as a potential therapy for certain symptoms of schizophrenia and obsessive-compulsive disorder, but discontinued the program for lack of efficacy in those indications after completing over 30 clinical trials in over 4,000 individuals. If the results of our ongoing or future preclinical studies and clinical trials are inconclusive with respect to the safety and efficacy of our programs and product candidates, if we do not meet the clinical endpoints with statistical and clinically meaningful significance, or if there are safety concerns associated with our product candidates, we may be prevented from, or delayed in, obtaining regulatory approval for such product candidates. In some instances, there can be significant variability in safety or efficacy results between different clinical trials of the same product candidate due to numerous factors, including changes in trial procedures set forth in protocols, differences in the size and type of the patient populations, changes in and adherence to the clinical trial protocols and the rate of dropout among clinical trial participants. Results of our trials could reveal a high and unacceptable severity and prevalence of side effects. In such an event, our trials could be suspended or terminated, and the FDA or comparable foreign regulatory authorities could order us to cease further development of or deny approval of our product candidates for any or all targeted indications. Treatment-related side effects could also affect patient recruitment or the ability of enrolled patients to complete the trial or result in potential product liability claims.

Further, our product candidates could cause undesirable side effects in clinical trials related to on-target toxicity. If on-target toxicity is observed, or if our product candidates have characteristics that are unexpected, we may need to abandon their development or limit development to more narrow uses or subpopulations in which the undesirable side effects or other characteristics are less prevalent, less severe or more acceptable from a risk-benefit perspective. In addition, our product candidates could cause undesirable side effects that have not yet been observed. For example, bitopertin may demonstrate toxicities in patients with hematologic diseases not previously observed by Roche when it was studied in different indications. Many compounds that initially showed promise in early-stage testing have later been found to cause side effects that prevented further development of the compound. Most product candidates that commence clinical trials are never approved as products, and there can be no assurance that any of our current or future clinical trials will ultimately be successful or support further clinical development or regulatory approval of any of our product candidates.

As is the case with many treatments for hematologic and rare diseases, it is likely that there may be side effects associated with the use of our product candidates. If significant adverse events or other side effects are observed in any of our current or future clinical trials, we may have difficulty recruiting patients to our clinical trials, patients may drop out of our trials, or we may be required to abandon the trials or development efforts of one or more product candidates altogether. We, the FDA or other applicable regulatory authorities, or an IRB may suspend or terminate clinical trials of a product candidate at any time for various reasons, including a belief that subjects in such trials are being exposed to unacceptable health risks or adverse side effects. Further, undesirable side effects in one of our clinical trials for a product candidate in one indication could adversely affect enrollment in clinical trials, regulatory approval and commercialization of such product candidate in other indications. Even if the side effects do not preclude the product from obtaining or maintaining regulatory approval, undesirable side effects may inhibit market acceptance of the approved product due to its tolerability versus other therapies. Any of these developments could materially harm our business, operating results, financial condition and prospects.

Some of our product candidates modulate pathways for which there are currently no approved or effective therapies, which may result in greater research and development expenses, regulatory issues that could delay or prevent approval or discovery of unknown or unanticipated adverse effects on safety or efficacy.

Some of our product candidates modulate pathways for which there are currently no approved or effective therapies, which may result in uncertainty. We select programs for targets based on compelling biological rationale, including evidence of expected biological effects in humans. We explore new programs based on extensive preclinical data analysis which sometimes cannot predict efficacy or safety in humans. Regulatory approval of novel product candidates such as ours can be more expensive, riskier and take longer than for other, more well-known or extensively studied pharmaceutical or biopharmaceutical product candidates due to our and regulatory agencies’ lack of experience with them. The novelty of the mechanism of action of any of our product candidates may lengthen the regulatory review process, require us to conduct additional studies or clinical trials, increase our development costs, lead to changes in regulatory positions and interpretations, delay or prevent approval and commercialization of our product

55

candidates or lead to significant post-approval limitations or restrictions. The novel mechanism of action also means that fewer people are trained in or experienced with product candidates of this type, which may make it more difficult to find, hire and retain personnel for research, development and manufacturing positions. If our product candidates utilize a novel mechanism of action that has not been the subject of extensive study compared to more well-known product candidates, there is also an increased risk that we may discover previously unknown or unanticipated adverse effects during our preclinical studies and clinical trials. Our product candidates may achieve lower efficacy in patients than expected. Any such events could adversely impact our business prospects, operating results and financial condition.

We have conducted and are currently conducting clinical trials for bitopertin, and may in the future conduct additional clinical trials of our product candidates, outside the United States, and the FDA and comparable foreign regulatory authorities may not accept data from such trials.

We conducted BEACON, our Phase 2 open-label, parallel-dose clinical trial of bitopertin in EPP and XLP patients, at sites in Australia. All participants who completed BEACON were eligible to participate in HELIOS, an open-label, long-term extension study of bitopertin in EPP and XLP patients, that we are also conducting in Australia. We are also conducting APOLLO, a Phase 3, randomized, double-blind, placebo-controlled clinical trial of bitopertin in EPP and XLP patients, in Canada, Europe and Australia, as well as the United States. We may in the future choose to conduct additional clinical trials of our product candidates outside the United States, including in Europe, Australia, or other foreign jurisdictions. The acceptance of trial data from clinical trials conducted outside the United States by the FDA may be subject to certain conditions. In cases where data from clinical trials conducted outside the United States are intended to serve as the sole basis for regulatory approval in the United States, the FDA will generally not approve the application on the basis of foreign data alone unless (i) the data are applicable to the United States population and United States medical practices, (ii) the trials were performed by clinical investigators of recognized competence and (iii) the data may be considered valid without the need for an on-site inspection by the FDA or, if the FDA considers such an inspection to be necessary, the FDA is able to validate the data through an on-site inspection or other appropriate means. Additionally, the FDA’s clinical trial requirements, including sufficient size of patient populations and statistical powering, must be met. Many foreign regulatory bodies have similar approval requirements. In addition, such foreign trials will be subject to the applicable local laws of the foreign jurisdictions where the trials are conducted. There can be no assurance that the FDA or any comparable foreign regulatory authority, will accept data from trials conducted outside of the United States or the applicable jurisdiction. If the FDA or any comparable foreign regulatory authority does not accept such data, it would result in the need for additional trials, which would be costly and time-consuming and delay aspects of our business plan, and which may result in our product candidates not receiving regulatory approval or clearance for commercialization in the applicable jurisdiction.

Although we intend to explore other therapeutic opportunities in addition to the programs and product candidates that we are currently developing, we may fail to identify viable new product candidates for clinical development for a number of reasons. If we fail to identify additional product candidates, our business could be materially harmed.

Research programs to pursue the development of our existing and planned product candidates for additional indications and to identify new product candidates and disease targets require substantial technical, financial and human resources whether or not they are ultimately successful. Our research programs may initially show promise in identifying potential indications and/or product candidates, yet fail to yield results for clinical development for a number of reasons, including:

•

the research methodology used may not be successful in identifying potential indications and/or product candidates;

•

potential product candidates may, after further study, be shown to have harmful adverse effects or other characteristics that indicate they are unlikely to be effective products; or

•

it may take greater human and financial resources than we will possess to identify additional therapeutic opportunities for our product candidates or to develop suitable potential product candidates through internal research programs, thereby limiting our ability to develop, diversify and expand our product portfolio.

Because we have limited financial and human resources, we intend to initially focus on research programs and product candidates for a limited set of indications. As a result, we may forego or delay pursuit of opportunities with other product candidates or for other indications that later prove to have greater commercial potential or a greater likelihood of success. Our resource allocation decisions may cause us to fail to capitalize on viable commercial products or profitable market opportunities.

Accordingly, there can be no assurance that we will ever be able to identify additional therapeutic opportunities for our product candidates or to develop suitable product candidates through internal research programs, which could materially adversely affect our future growth and prospects. We may focus our efforts and resources on potential product candidates or other potential programs that ultimately prove to be unsuccessful.

If we are not able to obtain, or if there are delays in obtaining, required regulatory approvals for any of our product candidates, we will not be able to commercialize, or will be delayed in commercializing, such product candidates, and our ability to generate revenue will be materially impaired.

56

Our product candidates and the activities associated with their development and commercialization, including their design, testing, manufacture, safety, efficacy, recordkeeping, labeling, storage, approval, advertising, promotion, sale, distribution, import and export are subject to comprehensive regulation by the FDA and other regulatory agencies in the United States and by comparable foreign regulatory authorities. Before we can commercialize any of our product candidates, we must obtain regulatory approval. Currently, all of our product candidates are in discovery, preclinical or clinical development, and we have not received approval to market any of our product candidates from regulatory authorities in any jurisdiction. It is possible that our product candidates, including any product candidates we may seek to develop in the future, will never obtain regulatory approval. We have limited experience in filing and supporting the applications necessary to gain regulatory approvals and rely on third-party CROs and/or regulatory consultants to assist us in this process. Securing regulatory approval requires the submission of extensive preclinical and clinical data and supporting information to the various regulatory authorities for each therapeutic indication to establish the product candidate’s safety and efficacy. Securing regulatory approval also requires the submission of information about the product manufacturing process to, and inspection of manufacturing facilities by, the relevant regulatory authority. Our product candidates may not be effective, may be only moderately effective or may prove to have undesirable or unintended side effects, toxicities or other characteristics that may preclude us from obtaining regulatory approval or prevent or limit commercial use. In addition, regulatory authorities may find fault with our manufacturing process or facilities or that of third-party contract manufacturers. We may also face greater than expected difficulty in manufacturing our product candidates.

The process of obtaining regulatory approvals, both in the United States and abroad, is expensive and often takes many years. If the FDA or a comparable foreign regulatory authority requires that we perform additional preclinical studies or clinical trials, approval may be delayed, if obtained at all. The length of such a delay varies substantially based upon a variety of factors, including the type, complexity and novelty of the product candidate involved. Changes in regulatory approval policies during the development period, changes in or enactment of additional statutes or regulations, or changes in regulatory review policies for each submitted NDA, BLA, or equivalent application types, may cause delays in the approval or rejection of an application. The FDA and comparable foreign regulatory authorities have substantial discretion in the approval process and may refuse to accept any application for review. Even if the FDA or a comparable foreign regulatory authority accepts an application for review, we can provide no assurance that an accepted application will ultimately result in an approval. Any guidance we receive from the FDA or other comparable regulatory authorities during the development or marketing application review processes is subject to change. As such, the outcomes of our interactions with such regulatory authorities during such review processes, such as pre-NDA or Type A meetings with the FDA, and the ultimate approval decision, are subject to significant uncertainty. Among other things, the FDA or a comparable foreign regulatory authority may decide that our data is insufficient for approval and require additional preclinical, clinical or other studies. Our product candidates could be delayed in receiving, or fail to receive, regulatory approval for many reasons, including the following:

•

the FDA or comparable foreign regulatory authorities may disagree with the design or implementation of our clinical trials;

•

we may not be able to enroll a sufficient number of patients in our clinical trials;

•

we may be unable to demonstrate to the satisfaction of the FDA or comparable foreign regulatory authorities that a product candidate is safe and effective for its proposed indication;

•

the results of clinical trials may not meet the level of statistical significance required by the FDA or comparable foreign regulatory authorities for approval;

•

we may be unable to demonstrate that a product candidate’s clinical and other benefits outweigh its safety risks;

•

the FDA or comparable foreign regulatory authorities may disagree with our interpretation of data from preclinical studies or clinical trials;

•

the data collected from clinical trials of our product candidates may not be sufficient to support the submission of an NDA, BLA or other submission or to obtain regulatory approval in the United States or elsewhere;

•

the FDA or comparable foreign regulatory authorities may find deficiencies with or fail to approve the manufacturing processes or facilities of third-party manufacturers with which we contract for clinical and commercial supplies; and

•

the approval policies or regulations of the FDA or comparable foreign regulatory authorities may significantly change such that our clinical data are insufficient for approval.

For example, we submitted an NDA for accelerated approval of bitopertin in EPP and XLP in the United States in September 2025. In February 2026, the FDA issued a CRL. Although the FDA agreed that clinical data from our AURORA and BEACON clinical trials provided sufficient evidence that bitopertin significantly lowers whole blood metal-free PPIX, the FDA concluded that the trials did not show evidence of association between percent change in PPIX and sunlight exposure-based endpoints as measured in the trials. As such, the FDA determined that there is uncertainty regarding whether bitopertin’s effect in PPIX is reasonably likely to predict clinical benefit despite the strong mechanistic and biological plausibility supporting the use of the PPIX biomarker in

57

protoporphyria. As a result, the FDA did not approve our NDA and indicated instead that we would need to provide evidence of a clinical benefit from an additional clinical trial, such as our ongoing APOLLO trial, to support a potential traditional approval.

Even if we were to obtain regulatory approval, regulatory authorities may approve any of our product candidates for fewer or more limited indications than we request, thereby narrowing the commercial potential of the product candidate. In addition, regulatory authorities may grant approval contingent on the performance of costly post-marketing clinical trials, or may approve a product candidate with a label that does not include the labeling claims necessary or desirable for the successful commercialization of that product candidate. Any of the foregoing scenarios could materially harm the commercial prospects for our product candidates.

If we experience delays in obtaining, or if we fail to obtain, approval of our product candidates, the commercial prospects for our product candidates may be harmed and our ability to generate revenue will be materially impaired.

A public health crisis, pandemic, epidemic, or outbreak of an infectious or highly contagious disease, may materially and adversely affect our business and financial results and could cause a disruption to the development of our product candidates.

Public health crises such as pandemics or similar outbreaks could adversely impact our business. The extent to which an outbreak of highly infectious or contagious diseases impacts our operations or those of our third-party partners, including our preclinical studies or clinical trial operations, will depend on future developments, which are highly uncertain and cannot be predicted with confidence, including the scope, severity and duration of the outbreak, actions taken to contain the outbreak or mitigate its impact, and the direct and indirect economic effects of the outbreak and containment measures, among others.

In addition, the patient populations that our product candidates target may be particularly susceptible to highly infectious or contagious diseases, which may make it more difficult for us to identify patients able to enroll in our current and future clinical trials and may impact the ability of enrolled patients to complete any such trials.

Risks Related to Commercialization

We face substantial competition, which may result in others discovering, developing or commercializing products before or more successfully than we do.

The development and commercialization of new products in the biopharmaceutical and related industries is highly competitive. We compete in the segments of the pharmaceutical, biotechnology, and other related markets that develop therapies in the field of hematologic diseases. There are other companies focusing on developing therapies in the field of hematologic diseases. We also compete more broadly across the market for cost-effective and reimbursable treatments. Some of these competitive products and therapies are based on scientific approaches that are the same as or similar to our approach, and others are based on entirely different approaches. These companies include divisions of large pharmaceutical companies and biotechnology companies of various sizes. We face competition with respect to our current product candidates, and will face competition with respect to any product candidates that we may seek to develop or commercialize in the future, from major pharmaceutical companies, specialty pharmaceutical companies and biotechnology companies worldwide. Potential competitors also include academic institutions, government agencies and other public and private research organizations that conduct research, seek patent protection and establish collaborative arrangements for research, development, manufacturing and commercialization. See “Business - Competition” for examples of the competition that our product candidates face.

Any product candidates that we successfully develop and commercialize will compete with currently approved therapies and new therapies that may become available in the future from segments of the pharmaceutical, biotechnology and other related markets. Key product features that would affect our ability to effectively compete with other therapeutics include the efficacy, safety and convenience of our products. We believe principal competitive factors to our business include, among other things, our ability to successfully transition research programs into clinical development, ability to raise capital and the scalability of the platform, pipeline and business.

Many of the companies that we compete against or which we may compete against in the future have significantly greater financial resources and expertise in research and development, manufacturing, preclinical and clinical testing, obtaining regulatory approvals and marketing approved products than we do. Mergers and acquisitions in the pharmaceutical and biotechnology industries may result in even more resources being concentrated among a smaller number of our competitors. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies. These competitors also compete with us in recruiting and retaining qualified scientific and management personnel and establishing clinical trial sites and patient registration for clinical trials, as well as in acquiring technologies complementary to, or necessary for, our programs. If these or other barriers to entry do not remain in place, other companies may be able to more directly or effectively compete with us.

Our commercial opportunity could be reduced or eliminated if our competitors develop and commercialize products that are safer, more effective, have fewer or less severe side effects, are more convenient or are less expensive than any products that we or our collaborators may develop. Our competitors also may obtain FDA or other regulatory approval for their products sooner than we may obtain approval for our product candidates, which could result in our competitors establishing a strong market position before

58

we or our collaborators are able to enter the market. The key competitive factors affecting the success of all of our product candidates, if approved, are likely to be their efficacy, safety, convenience, price, level of generic competition and availability of reimbursement from government and other third-party payors.

If the market opportunities for our programs and product candidates are smaller than we estimate or if any regulatory approval that we obtain is based on a narrower definition of the patient population, our revenue and ability to achieve profitability could be materially adversely affected.

The incidence and prevalence for the target patient populations of our programs and product candidates have not been established with precision. Our lead heme biosynthesis modulation product candidate, bitopertin, is an oral, selective inhibitor of GlyT1. We are initially focused on developing bitopertin for the treatment of EPP and XLP, which are both diseases marked by severe photosensitivity and damage to the hepatobiliary system caused by the accumulation of PPIX. We are initially focused on developing DISC-0974 for anemia of MF and anemia of inflammatory bowel disease, or IBD. We are initially focused on developing DISC-3405 for the treatment of PV and sickle cell disease, or SCD. Our projections of both the number of people who have these diseases, as well as the subset of people with these diseases who have the potential to benefit from treatment with our programs and product candidates, are based on our estimates.

The total addressable market opportunity will ultimately depend upon, among other things, the diagnosis criteria included in the final label, the indications for which our product candidates are approved for sale, acceptance by the medical community and patient access, product pricing and reimbursement. The number of patients with EPP, XLP, anemias of MF or IBD, PV, SCD, or other indications for which our product candidates may be approved as treatment may turn out to be lower than expected, patients may not be otherwise amenable to treatment with our products, or new patients may become increasingly difficult to identify or gain access to, all of which would adversely affect our results of operations and our business. We may not be successful in our efforts to identify additional product candidates. Due to our limited resources and access to capital, we must prioritize development of certain product candidates, which may prove to be the wrong choice and may adversely affect our business.

We cannot be certain that the patient populations for each specific disease will be large enough to allow us to successfully obtain approval for our product candidates, or successfully commercialize any of our product candidates, if approved, and achieve profitability.

If our current product candidates or any future product candidates do not achieve broad market acceptance, the revenue that we generate from our sales may be limited, and we may never become profitable.

We have never commercialized a product candidate for any indication. Even if our current product candidates and any future product candidates are approved by the appropriate regulatory authorities for marketing and sale, they may not gain acceptance among physicians, patients, third-party payors, and others in the medical community. If any product candidates for which we may obtain regulatory approval do not gain an adequate level of market acceptance, we may not generate significant revenue and may not become profitable or may be significantly delayed in achieving profitability. Market acceptance of our current product candidates and any future product candidates by the medical community, patients and third-party payors will depend on a number of factors, some of which are beyond our control. For example, physicians are often reluctant to switch their patients, and patients may be reluctant to switch, from existing therapies even when new and potentially more effective or safer treatments enter the market. If public perception is influenced by claims that the use of heme biosynthesis modulation therapies or hepcidin-targeted agents is unsafe, whether related to our or our competitors’ products, our products may not be accepted by the general public or the medical community. Future adverse events in the hematologic diseases or the biopharmaceutical industry could also result in greater governmental regulation, stricter labeling requirements and potential regulatory delays in the testing or approvals of our product candidates.

In the United States and markets in other countries, patients generally rely on third-party payors to reimburse all or part of the costs associated with their treatment. Adequate coverage and reimbursement from governmental healthcare programs, such as Medicare and Medicaid, and commercial payors is critical to new product acceptance. Our ability to successfully commercialize our product candidates will depend in part on the extent to which coverage and adequate reimbursement for these products and related treatments will be available from government health administration authorities, private health insurers and other organizations. Even if coverage is provided, the approved reimbursement amount may not be high enough to allow us to establish or maintain pricing sufficient to realize a sufficient return on our investment. Government authorities and third-party payors, such as private health insurers and health maintenance organizations, decide which medications they will pay for and establish reimbursement levels.

Efforts to educate the medical community and third-party payors on the benefits of our current product candidates and any future product candidates may require significant resources and may not be successful. If our current product candidates or any future product candidates are approved but do not achieve an adequate level of market acceptance, we could be prevented from or significantly delayed in achieving profitability. The degree of market acceptance of any of our current product candidates and any future product candidates will depend on a number of factors, including:

•

the efficacy of our current product candidates and any future product candidates;

59

•

the prevalence and severity of adverse events associated with our current product candidates and any future product candidates;

•

the clinical indications for which our product candidates are approved and the approved claims that we may make for the products;

•

limitations or warnings contained in the product’s FDA-approved labeling or those of comparable foreign regulatory authorities, including potential limitations or warnings for our current product candidates and any future product candidates that may be more restrictive than other competitive products;

•

changes in the standard of care for the targeted indications for our current product candidates and any future product candidates, which could reduce the marketing impact of any claims that we could make following FDA approval or approval by comparable foreign regulatory authorities, if obtained;

•

the relative convenience and ease of administration of our current product candidates and any future product candidates;

•

the cost of treatment compared with the economic and clinical benefit of alternative treatments or therapies;

•

the availability of adequate coverage or reimbursement by third-party payors, including government healthcare programs such as Medicare and Medicaid and other healthcare payors;

•

the price concessions required by third-party payors to obtain coverage;

•

the willingness of patients to pay out-of-pocket in the absence of adequate coverage and reimbursement;

•

the extent and strength of our marketing and distribution of our current product candidates and any future product candidates;

•

the safety, efficacy, and other potential advantages over, and availability of, alternative treatments already used or that may later be approved;

•

distribution and use restrictions imposed by the FDA or comparable foreign regulatory authorities with respect to our current product candidates and any future product candidates or to which we agree as part of a Risk Evaluation and Mitigation Strategy, or REMS, or voluntary risk management plan;

•

the timing of market introduction of our current product candidates and any future product candidates, as well as competitive products;

•

our ability to offer our current product candidates and any future product candidates for sale at competitive prices;

•

the willingness of the target patient population to try new therapies and of physicians to prescribe these therapies;

•

the extent and strength of our third-party manufacturer and supplier support;

•

the approval of other new products;

•

adverse publicity about our current product candidates and any future product candidates or favorable publicity about competitive products; and

•

potential product liability claims.

There is also significant uncertainty related to the insurance coverage and reimbursement of newly approved products and coverage may be more limited than the purposes for which the medicine is approved by the FDA or comparable foreign regulatory authorities. In the United States, the principal decisions about reimbursement for new medicines are typically made by the Centers for Medicare & Medicaid Services, or CMS, an agency within the U.S. Department of Health and Human Services, or HHS. CMS decides whether and to what extent a new medicine will be covered and reimbursed under Medicare and private payors tend to follow CMS to a substantial degree.

We may not be successful in addressing these or other factors that might affect the market acceptance of our product candidates. Failure to achieve widespread market acceptance of our product candidates would materially harm our business, financial condition and results of operations.

60

Even if we receive regulatory approval for any of our product candidates, we will be subject to ongoing regulatory obligations and continued regulatory review, which may result in significant additional expense. Additionally, our product candidates, if approved, could be subject to post-market study requirements, marketing and labeling restrictions and even recall or market withdrawal if unanticipated safety issues are discovered following approval. In addition, we may be subject to penalties or other enforcement action if we fail to comply with regulatory requirements.

If the FDA or a comparable foreign regulatory authority approves any of our product candidates, the manufacturing processes, labeling, packaging, distribution, import, export, adverse event reporting, storage, advertising, promotion, monitoring and recordkeeping for the product will be subject to extensive and ongoing regulatory requirements. These requirements include submissions of safety and other post-marketing information and reports, establishment registration and listing, as well as continued compliance with cGMPs and GCPs for any clinical trials that we conduct post-approval. Any regulatory approvals that we receive for our product candidates may also be subject to limitations on the approved indicated uses for which the product may be marketed or to the conditions of approval, or contain requirements for potentially costly post-marketing studies, including Phase 4 clinical trials, and surveillance to monitor the safety and efficacy of the product. The FDA may also require a REMS in order to approve our product candidates, which could entail requirements for a medication guide, physician communication plans or additional elements to ensure safe use, such as restricted distribution methods, patient registries and other risk minimization tools. For certain commercial prescription drug and biological products, manufacturers and other parties involved in the supply chain must also meet chain of distribution requirements and build electronic, interoperable systems for product tracking and tracing and for notifying the FDA of counterfeit, diverted, stolen and intentionally adulterated products or other products that are otherwise unfit for distribution in the United States. Additionally, under the Food and Drug Omnibus Reform Act of 2022, or FDORA, sponsors of approved drugs and biologics must provide 6 months’ notice to the FDA of any changes in marketing status, such as the withdrawal of a drug, and failure to do so could result in the FDA placing the product on a list of discontinued products, which would revoke the product’s ability to be marketed. Later discovery of previously unknown problems with a product, including adverse events of unanticipated severity or frequency, or with our third-party manufacturers or manufacturing processes, or failure to comply with regulatory requirements, may result in, among other things:

•

restrictions on the marketing or manufacturing of the product, withdrawal of the product from the market or voluntary or mandatory product recalls;

•

manufacturing delays and supply disruptions where regulatory inspections identify observations of noncompliance requiring remediation;

•

revisions to the labeling, including limitation on approved uses or the addition of additional warnings, contraindications or other safety information, including boxed warnings;

•

imposition of a REMS which may include distribution or use restrictions;

•

requirements to conduct additional post-market clinical trials to assess the safety of the product;

•

clinical trial holds;

•

fines, warning letters or other regulatory enforcement action;

•

refusal by the FDA to approve pending applications or supplements to approved applications filed by us or suspension or revocation of approvals;

•

product seizure or detention, or refusal to permit the import or export of products; and

•

injunctions or the imposition of civil or criminal penalties.

The FDA’s and other regulatory authorities’ policies may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our product candidates. In addition, the U.S. Supreme Court’s July 2024 decision to overturn established case law giving deference to regulatory agencies’ interpretations of ambiguous statutory language has introduced uncertainty regarding the extent to which the FDA’s regulations, policies and decisions may become subject to increasing legal challenges, delays, and/or changes. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any regulatory approval that we may have obtained, which would adversely affect our business, prospects and ability to achieve or sustain profitability.

61

Product liability lawsuits brought against us could cause us to incur substantial liabilities and could limit commercialization of any product candidates that we may develop.

We face an inherent risk of product liability lawsuits related to the testing of any product candidates in human clinical trials and will face an even greater risk if we commercially sell such product candidates. If we cannot successfully defend ourselves against any such claims, we may incur substantial liabilities. Regardless of merit or eventual outcome, liability claims may result in:

•

decreased demand for our product candidates;

•

injury to our reputation;

•

withdrawal of clinical trial participants;

•

termination of clinical trial sites or entire trial programs;

•

significant litigation costs;

•

substantial monetary awards to or costly settlements with patients or other claimants;

•

product recalls or a change in the indications for which products may be used;

•

loss of revenue;

•

diversion of management and scientific resources from our business operations; and

•

the inability to commercialize our product candidates.

We are highly dependent upon consumer perceptions of us and the safety and quality of any product candidate we commercialize. We could be adversely affected if we are subject to negative publicity. We could also be adversely affected if any of our future products or any similar products distributed by other companies prove to be, or are asserted to be, harmful to patients. Although we maintain product liability insurance coverage, it may not be adequate to cover all liabilities that we may incur. We anticipate that we may need to further increase our insurance coverage as we begin additional clinical trials or if we successfully commercialize additional product candidates. Insurance coverage is increasingly expensive. We may not be able to maintain insurance coverage at a reasonable cost or in an amount adequate to satisfy any liability that may arise.

Risks Related to Our Reliance on Third Parties

We rely on third parties to conduct our clinical trials for our product candidates, as well as potential investigator-sponsored clinical trials of our product candidates. If these third parties do not successfully carry out their contractual duties, comply with regulatory requirements, or meet expected deadlines, we may not be able to obtain regulatory approval for or commercialize our product candidates and our business could be substantially harmed.

We do not have the ability to independently conduct clinical trials. We have relied on and expect to continue to rely on medical institutions, clinical investigators, contract laboratories and other third parties, such as CROs, to conduct or otherwise support the Phase 3 APOLLO clinical trial of bitopertin in EPP and XLP, as well as clinical trials for our other product candidates. As a result, many important aspects of our development programs, including their conduct and timing, are outside of our direct control. Our reliance on third parties to conduct future clinical trials also results in less direct control over the management of data developed through clinical trials than would be the case if we were relying entirely upon our own staff.

Nevertheless, we are responsible for ensuring that each of our clinical trials is conducted in accordance with the applicable protocol, legal and regulatory requirements and scientific standards, and our reliance on CROs or other third parties will not relieve us of our regulatory responsibilities. For any violations of laws and regulations during the conduct of our clinical trials, we could be subject to warning letters or enforcement action that may include civil penalties up to and including criminal prosecution. For example, we, our principal investigators and our CROs are required to comply with regulations, including GCPs, for conducting, monitoring, recording and reporting the results of clinical trials to ensure that the data and results are scientifically credible and accurate, and that the trial patients are adequately informed of the potential risks of participating in clinical trials and their rights are protected. These regulations are enforced by the FDA, the Competent Authorities of the Member States of the European Economic Area, or the EEA, and comparable foreign regulatory authorities for any products in clinical development. The FDA enforces GCP regulations through periodic inspections of clinical trial sponsors, principal investigators and trial sites. If we, our principal investigators or our CROs fail to comply with applicable GCPs, the clinical data generated in our clinical trials may be deemed unreliable and the FDA or comparable foreign regulatory authorities may require us to perform additional clinical trials before approving our marketing applications. We cannot assure you that, upon inspection, the FDA will determine that any of our future clinical trials will comply with GCPs. In addition, our clinical trials must be conducted with product candidates produced under current Good Manufacturing Practice, or cGMP, regulations. Our failure or the failure of our principal investigators or CROs to comply with these regulations may require us to repeat clinical trials, which would delay the regulatory approval process, significantly increase our expenditures and could also subject us to enforcement action. We also are required to register ongoing

62

clinical trials and post the results of completed clinical trials on a government-sponsored database, ClinicalTrials.gov, within certain timeframes. Failure to do so can result in fines, adverse publicity and civil and criminal sanctions.

Communicating with outside parties can also be challenging, potentially leading to mistakes as well as difficulties in coordinating activities. Outside parties may:

•

have staffing difficulties;

•

fail to comply with contractual obligations;

•

experience regulatory compliance issues;

•

undergo changes in priorities or become financially distressed; or

•

form relationships with other entities, some of which may be our competitors.

These factors may materially adversely affect the willingness or ability of third parties to conduct our clinical trials and may subject us to unexpected cost increases that are beyond our control. If the principal investigators or CROs do not perform clinical trials in a satisfactory manner, breach their obligations to us or fail to comply with regulatory requirements, or if any of our relationships with these third-party principal investigators or CROs terminate, the development, regulatory approval and commercialization of our product candidates may be delayed, we may not be able to obtain regulatory approval and commercialize our product candidates or our development program may be materially and irreversibly harmed. If we are unable to rely on clinical data collected by our principal investigators or CROs, we could be required to repeat, extend the duration of, or increase the size of any clinical trials we conduct and this could significantly delay commercialization and require significantly greater expenditures.

We may also rely on academic and private non-academic institutions to conduct and sponsor clinical trials relating to our product candidates, such as the clinical trial of bitopertin in DBA, which is being conducted by NIH under a collaborative research and development agreement. We will not control the design or conduct of any investigator-sponsored trials, and it is possible that the FDA or non-U.S. regulatory authorities will not view these investigator-sponsored trials as providing adequate support for future clinical trials, whether controlled by us or third parties, for any one or more reasons, including elements of the design or execution of the trials or safety concerns or other trial results. Such arrangements will likely provide us certain information rights with respect to the investigator-sponsored trials, including access to and the ability to use and reference the data, including for our own regulatory filings, resulting from the investigator-sponsored trials. However, we would not have control over the timing and reporting of the data from investigator-sponsored trials, nor would we own the data from the investigator-sponsored trials. If we are unable to confirm or replicate the results from the investigator-sponsored trials or if negative results are obtained, we would likely be further delayed or prevented from advancing further clinical development of our product candidates. Further, if investigators or institutions breach their obligations with respect to the clinical development of our product candidates, or if the data proves to be inadequate compared to the first-hand knowledge we might have gained had the investigator-sponsored trials been sponsored and conducted by us, then our ability to design and conduct any future clinical trials ourself may be adversely affected.

We might not realize the anticipated benefits of our current collaborations with Mabwell or NIH, or any other collaborations we enter into in the future.

Research, development, commercialization and/or strategic collaborations, including those that we have with Mabwell and NIH, are subject to numerous risks, which include the following:

•

collaborators may have significant control or discretion in determining the efforts and resources that they will apply to a collaboration, and might not commit sufficient efforts and resources or might misapply those efforts and resources;

•

we may have limited influence or control over the approaches to research, development and/or commercialization of product candidates in the territories in which our collaboration partners lead research, development and/or commercialization;

•

collaborators might not pursue research, development and/or commercialization of collaboration product candidates or might elect not to continue or renew research, development and/or commercialization programs based on preclinical studies and/or clinical trial results, changes in their strategic focus, availability of funding or other factors, such as a business combination that diverts resources or creates competing priorities;

•

collaborators might delay, provide insufficient resources to, or modify or stop research or clinical development for collaboration product candidates or require a new formulation of a product candidate for clinical testing;

•

collaborators with sales, marketing and distribution rights to one or more product candidates might not commit sufficient resources to sales, marketing and distribution or might otherwise fail to successfully commercialize those product candidates;

63

•

collaborators might not properly maintain or defend our intellectual property rights or might use our intellectual property improperly or in a way that jeopardizes our intellectual property or exposes us to potential liability;

•

collaboration activities might result in the collaborator having intellectual property covering our activities or product candidates, which could limit our rights or ability to research, develop and/or commercialize our product candidates;

•

collaborators might not be in compliance with laws applicable to their activities under the collaboration, which could impact the collaboration and us;

•

disputes might arise between a collaborator and us that could cause a delay or termination of the collaboration or result in costly litigation that diverts management attention and resources; and

•

collaborations might be terminated, which could result in a need for additional capital to pursue further research, development and/or commercialization of our product candidates.

In addition, funding provided by a collaborator might not be sufficient to advance product candidates under the collaboration. If a collaborator terminates a collaboration or a program under a collaboration, including by failing to exercise a license or other option under the collaboration, whether because we fail to meet a milestone or otherwise, any potential revenue from the collaboration would be significantly reduced or eliminated. In addition, we will likely need to either secure other funding to advance research, development and/or commercialization of the relevant product candidate or abandon that program, the development of the relevant product candidate could be significantly delayed, and our cash expenditures could increase significantly if we are to continue research, development and/or commercialization of the relevant product candidates.

Any one or more of these risks, if realized, could reduce or eliminate future revenue from product candidates under our collaborations, and could have a material adverse effect on our business, financial condition, results of operations and/or growth prospects.

We have established collaborations with Mabwell and NIH and may seek to establish additional collaborations, and, if we are not able to establish them on commercially reasonable terms, or at all, we may have to alter our development and commercialization plans.

Our product development programs and the potential commercialization of our product candidates will require substantial additional cash to fund expenses. For some of our product candidates, we may decide to collaborate with pharmaceutical and biotechnology companies, such as our collaborations with Mabwell and NIH, for the development and potential commercialization of those product candidates.

We face significant competition in seeking appropriate collaborators. Whether we reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed collaborator’s own evaluation of a potential collaboration. Such factors a potential collaborator will use to evaluate a collaboration may include the design or results of clinical trials, the likelihood of approval by the FDA or comparable foreign regulatory authorities, the potential market for the subject product candidate, the costs and complexities of manufacturing and delivering such product candidate to patients, the potential of competing products, the existence of uncertainty with respect to our ownership of technology, which can exist if there is a challenge to such ownership without regard to the merits of the challenge and industry and market conditions generally. The collaborator may also consider alternative product candidates or technologies for similar indications that may be available to collaborate on and whether such a collaboration could be more attractive than the one with us for our product candidate. The terms of any additional collaborations or other arrangements that we may establish may not be favorable to us.

We are also restricted by Roche’s right of first negotiation under our current license agreement with them and may in the future be restricted under other license or collaboration agreements from entering into future agreements on certain terms with potential collaborators. Collaborations are complex and time-consuming to negotiate and document. In addition, there have been a significant number of recent business combinations among large pharmaceutical companies that have resulted in a reduced number of potential future collaborators.

We may not be able to negotiate collaborations on a timely basis, on acceptable terms, or at all. If we are unable to do so, we may have to curtail the development of the product candidate for which we are seeking to collaborate, reduce or delay our development program or one or more of our other development programs, delay our potential commercialization or reduce the scope of any sales or marketing activities, or increase our expenditures and undertake development or commercialization activities at our own expense. If we elect to increase our expenditures to fund development or commercialization activities on our own, we may need to obtain additional capital, which may not be available to us on acceptable terms or at all. If we do not have sufficient funds, we may not be able to further develop our product candidates or bring them to market and generate product revenue.

In addition, any future collaborations that we enter into may not be successful. The success of our collaboration arrangements will depend heavily on the efforts and activities of our collaborators. Collaborators generally have significant discretion in determining

64

the efforts and resources that they will apply to these collaborations. Disagreements between parties to a collaboration arrangement regarding clinical development and commercialization matters can lead to delays in the development process or commercializing the applicable product candidate and, in some cases, termination of the collaboration arrangement. These disagreements can be difficult to resolve if neither of the parties has final decision-making authority. Collaborations with pharmaceutical or biotechnology companies and other third parties often are terminated or allowed to expire by the other party. Any such termination or expiration would adversely affect us financially and could harm our business reputation.

We contract with third parties for the manufacture of our product candidates for preclinical development and clinical testing and expect to continue to do so for commercialization. This reliance on third parties increases the risk that we will not have sufficient quantities of our product candidates or products or such quantities at an acceptable cost, which could delay, prevent, or impair our development or commercialization efforts.

We do not currently own or operate, nor do we have any plans to establish in the future, any manufacturing facilities. As such, we rely, and expect to continue to rely, on third parties such as contract development and manufacturing organizations, or CDMOs, for the manufacture of our product candidates for preclinical development and clinical testing. We also expect to rely on third parties for the commercial manufacture of our products if any of our product candidates receive regulatory approval. This reliance on third parties increases the risk that we will not have sufficient quantities of our product candidates or products or such quantities at an acceptable time, cost or quality, which could delay, prevent or impair our development or commercialization efforts.

The facilities used by our CDMOs to manufacture our product candidates must be inspected by the FDA pursuant to pre-approval inspections that will be conducted after we submit our marketing applications to the FDA. We do not control the manufacturing process of, and will be completely dependent on, our CDMOs for compliance with cGMPs in connection with the manufacture of our product candidates. If our CDMOs cannot successfully manufacture material that conforms to our specifications and the strict regulatory requirements of the FDA or others, they will not be able to pass regulatory inspections and/or maintain regulatory compliance. In addition, we have no control over the ability of our CDMOs to maintain adequate quality control, quality assurance and qualified personnel. If the FDA or a comparable foreign regulatory authority finds deficiencies with or does not approve these facilities for the manufacture of our product candidates or if it finds deficiencies or withdraws any such approval in the future, we may need to find alternative manufacturing facilities, which would significantly impact our ability to develop, obtain regulatory approval for or market our product candidates, if approved.

If any CDMO with whom we contract fails to perform its obligations, we may be forced to enter into an agreement with a different CDMO, which we may not be able to do on reasonable terms, if at all. In such a scenario, our clinical trials supply could be delayed significantly as we establish alternative supply sources. In some cases, the technical skills required to manufacture our product candidates may be unique or proprietary to the original CDMO and we may have difficulty, or there may be contractual restrictions prohibiting us from, transferring such skills to a back-up or alternate supplier, or we may be unable to transfer such skills at all. In addition, if we are required to change CDMOs for any reason, we will be required to verify that the new CDMO maintains facilities and procedures that comply with quality standards and with all applicable regulations. We will also need to verify, such as through a manufacturing comparability study, that any new manufacturing process will produce our product candidate according to the specifications previously submitted to the FDA or another regulatory authority. The delays associated with the verification of a new CDMO could negatively affect our ability to develop product candidates or commercialize our products in a timely manner or within budget. In addition, changes in manufacturers often involve changes in manufacturing procedures and processes, which could require that we conduct bridging studies between our prior supply used in our clinical trials and that of any new manufacturer. We may be unsuccessful in demonstrating the comparability of clinical supplies which could require the conduct of additional clinical trials.

Further, our failure, or the failure of our CDMOs, to comply with applicable regulations could result in sanctions, including clinical holds, fines, injunctions, civil penalties, delays, suspension or withdrawal of approvals, license revocation, seizures or recalls of product candidates or products, if approved, operating restrictions and criminal prosecutions, any of which could significantly and adversely affect our business and supplies of our product candidates.

We may be unable to establish any additional agreements with CDMOs or do so on acceptable terms. Reliance on CDMOs entails additional risks, including:

•

reliance on the third party for regulatory compliance and quality assurance;

•

the possible breach of the manufacturing agreement by the third party;

•

the possible misappropriation of our proprietary information, including our trade secrets and know-how; and

•

the possible termination or nonrenewal of the agreement by the third party at a time that is costly or inconvenient for us.

Our product candidates and any products that we may develop may compete with other product candidates and approved products for access to manufacturing facilities. There are a limited number of CDMOs that operate under cGMP regulations and that might be capable of manufacturing for us.

65

Any performance failure on the part of our existing or future manufacturers could delay clinical development or regulatory approval. If our current CDMOs cannot perform as agreed, we may be required to replace such CDMOs. In addition, there has been increased governmental focus in the U.S. on contracting with Chinese companies for the development or manufacturing of pharmaceutical products. For example, legislation pending in Congress would prohibit U.S. federal funding in connection with biotechnology equipment or services produced or provided by certain named Chinese “biotechnology companies of concern” and loans and grants to, and federal contracts with any entity that uses biotechnology equipment or services from one of these entities. The legislation would also give the federal government the authority to name additional “biotechnology companies of concern” that are engaged in research activities with the Chinese government and that pose a risk of U.S. national security. In addition, in 2025, the United States imposed substantial tariffs on imports from China as well as on other trading partners, including Canada, Mexico, and the EU. We currently rely on certain foreign or foreign-owned third-party vendors to manufacture certain materials used in clinical trials of our product candidates or to provide services in connection with certain clinical trials or certain discovery activities. Our engagement with these foreign and foreign-owned vendors may be subject to additional U.S. legislation, investigations, sanctions, further escalation of tariffs, trade restrictions and other foreign regulatory requirements, which could cause us to need to identify alternate service providers, increase the cost or reduce the supply of materials available to us, delay the procurement or supply of these materials, delay or impact clinical trials, or have an adverse effect on our ability to secure significant commitments from governments to purchase our potential therapies, any of which could adversely affect our financial condition and business prospects. We continue to assess the legislation and the tariffs as they develop to determine the effect, if any, on our contractual relationships.

Our current and anticipated future dependence upon others for the manufacture of our product candidates or products may adversely affect our future profit margins and our ability to commercialize any products that receive regulatory approval on a timely and competitive basis.

The third parties upon whom we rely for the supply of the active pharmaceutical ingredients used in our product candidates are our sole sources of supply, and the loss of any of these suppliers could significantly harm our business.

The active pharmaceutical ingredients, or API, used in certain of our product candidates are supplied to us from single-source suppliers. Our ability to successfully develop such product candidates, and to ultimately supply any resulting commercial products in quantities sufficient to meet the market demand, depends in part on our ability to obtain the API for these products in accordance with regulatory requirements and in sufficient quantities for clinical testing and commercialization. We do not currently have arrangements in place for a redundant or second-source supply of any such API in the event any of our current suppliers of such API cease their operations for any reason. We are also unable to predict how changing global economic conditions or potential global health concerns or crises will affect our third-party suppliers and manufacturers. Regional issues may in some cases accentuate these risks. For example, the pharmaceutical industry generally, and in some instances we or other third parties on which we rely, depend on China-based suppliers or service providers for certain raw materials, products and services, or other activities. Our ability or the ability of our collaborators or such other third parties to continue to engage these China-based suppliers or service providers for certain preclinical research programs and clinical development programs could be restricted due to geopolitical developments between the United States and China, including as a result of the further escalation of tariffs or other trade restrictions or if the proposed federal legislation that would prohibit U.S. federal funding in connection with biotechnology equipment or services produced or provided by certain named Chinese “biotechnology companies of concern” or a similar law were to be enacted. Any negative impact of such matters on our third-party suppliers and manufacturers may also have an adverse impact on our results of operations or financial condition.

For all of our product candidates, we intend to identify and qualify additional manufacturers to provide such API. We are not certain, however, that our single-source suppliers will be able to meet our demand for their products, either because of the nature of our agreements with those suppliers, our limited experience with those suppliers or our relative importance as a customer to those suppliers. It may be difficult for us to assess our ability to timely meet our demand in the future based on past performance. While our suppliers have generally met our demand for their products on a timely basis in the past, they may subordinate our needs in the future to their other customers.

Establishing additional or replacement suppliers for the API used in our product candidates, if required, may not be accomplished quickly. If we are able to find a replacement supplier, such replacement supplier would need to be qualified and may require additional regulatory inspection or approval, which could result in further delay. While we seek to maintain adequate inventory of the API used in our product candidates, any interruption or delay in the supply of components or materials, or our inability to obtain such API from alternate sources at acceptable prices in a timely manner could impede, delay, limit or prevent our development and commercialization efforts, which could harm our business, results of operations, financial condition and prospects.

The manufacture of biologics is complex and our third-party manufacturers may encounter difficulties in production. If any of our third-party manufacturers encounter such difficulties, our ability to provide supply of product candidates for clinical trials or products for patients, if approved, could be delayed or prevented.

DISC-0974, DISC-0998, and DISC-3405 are monoclonal antibodies. Manufacturing biologics, like monoclonal antibodies, especially in large quantities, is often complex and may require the use of innovative technologies to handle living cells. Each lot

66

of an approved biologic must undergo thorough testing for identity, strength, quality, purity and potency. Manufacturing biologics requires facilities specifically designed for and validated for this purpose, and sophisticated quality assurance and quality control procedures are necessary. Slight deviations anywhere in the manufacturing process, including filling, labeling, packaging, storage and shipping and quality control and testing, may result in lot failures, product recalls or spoilage. When changes are made to the manufacturing process, we may be required to provide preclinical and clinical data showing the comparable identity, strength, quality, purity or potency of the products before and after such changes. If microbial, viral or other contaminations are discovered at the facilities of our manufacturers, such facilities may need to be closed for an extended period of time to investigate and remedy the contamination, which could delay clinical trials and adversely harm our business.

If any third-party manufacturer of any of our product candidates is unable to increase the scale of its production of such product candidates or increase the product yield of its manufacturing, then our costs to manufacture such product or product candidate may increase and any commercialization may be delayed.

There are risks associated with large scale manufacturing for clinical trials or commercial scale including, among others, cost overruns, potential problems with process scale-up, process reproducibility, stability issues, compliance with good manufacturing practices, lot consistency and timely availability of components and raw materials. Even if we obtain regulatory approval for any of our current product candidates or any future product candidates, there is no assurance that our manufacturers will be able to manufacture the approved product to specifications acceptable to the FDA or other comparable foreign regulatory authorities, to produce it in sufficient quantities to meet the requirements for the potential commercial launch of such product or to meet potential future demand. If our manufacturers are unable to produce sufficient quantities for clinical trials or for commercialization, our development and commercialization efforts would be impaired, which would have an adverse effect on our business, financial condition, results of operations and growth prospects.

Risks Related to Our Intellectual Property

If we are unable to obtain and maintain patent and other intellectual property protection for our technology and product candidates, or if the scope of the intellectual property protection obtained is not sufficiently broad, our competitors could develop and commercialize technology and drugs similar or identical to ours, and our ability to successfully commercialize our technology and drugs may be impaired, and we may not be able to compete effectively in our market.

Our commercial success depends in part on our ability to obtain and maintain proprietary or intellectual property protection in the U.S. and other countries for our current or future product candidates, including our current lead product candidates, bitopertin, DISC-0974 and DISC-3405, and our other current or future programs, including DISC-0998, as well as for their respective compositions, formulations, methods used to manufacture them and methods of treatment, in addition to successfully defending these patents against third-party challenges. We seek to protect our proprietary and intellectual property position by, among other methods, filing patent applications in the U.S. and abroad related to our proprietary technology, inventions, and improvements that are important to the development and implementation of our business. Our ability to stop unauthorized third parties from making, using, selling, offering to sell, or importing our product candidates is dependent upon the extent to which we have rights under valid and enforceable patents or trade secrets that cover these activities. We also rely on trade secrets, know-how and continuing technological innovation to develop and maintain our proprietary and intellectual property position.

We have in-licensed, and may in the future in-license, a portion of our intellectual property, and, if we fail to comply with our obligations under these license arrangements, we could lose such intellectual property rights or owe damages to the licensor of such intellectual property. In particular, we have exclusively licensed intellectual property rights from Roche to develop and commercialize bitopertin, including certain back-up compounds and derivatives, for all prophylactic and therapeutic uses. The Roche license covers know-how, and certain specified Roche patent rights, including a composition of matter patent for bitopertin that expires in 2026. We also have exclusively licensed intellectual property rights from AbbVie Deutschland GmbH & Co. KG, or AbbVie, to develop and commercialize DISC-0974 and DISC-0998. The AbbVie license covers know-how, and certain specified AbbVie patent rights, including composition of matter and methods of use patents and patent applications for DISC-0974 and DISC-0998. We also have exclusively licensed intellectual property rights from Mabwell to develop and commercialize antibody products containing Mabwell’s MWTX-001, MWTX-002, and MWTX-003 antibodies. The Mabwell license covers know-how and certain specified Mabwell patent rights, including composition of matter and methods of use patents and patent applications for MWTX-001, MWTX-002 and MWTX-003.

The patent position of biotechnology and pharmaceutical companies generally is highly uncertain, involves complex legal and factual questions and has in recent years been the subject of much litigation. The degree of patent protection we require to successfully commercialize our current or future product candidates may be unavailable or severely limited in some cases and may not adequately protect our rights or permit us to gain or keep any competitive advantage. We cannot provide any assurances that any of our patents have, or that any of our pending patent applications that mature into issued patents will include, claims with a scope sufficient to protect bitopertin, DISC-0974, DISC-3405 or our other current or future product candidates. In addition, if the breadth or strength of protection provided by our patent applications or any patents we may own or in-license is threatened, we could dissuade companies from collaborating with us to license, develop or commercialize current or future product candidates.

67

In addition, the laws of foreign countries may not protect our rights to the same extent as the laws of the U.S. For example, in jurisdictions outside the U.S., a license may not be enforceable unless all the owners of the intellectual property agree or consent to the license. Accordingly, any actual or purported co-owner of our patent rights could seek monetary or equitable relief requiring us to pay it compensation for, or refrain from, exploiting these patents due to such co-ownership. Furthermore, patents have a limited lifespan. In the U.S., and most other jurisdictions in which we have undertaken patent filings, the natural expiration of a patent is generally twenty years after it is filed, assuming all maintenance fees are paid. Various extensions may be available, on a jurisdiction-by-jurisdiction basis; however, the life of a patent, and thus the protection it affords, is limited. Additionally, our product candidates may or may not be eligible for such extensions or we may not be able to obtain such protections due to procedural or other reasons. Given the amount of time required for the development, testing and regulatory review of new product candidates, patents protecting such candidates might expire before or shortly after such candidates are commercialized. As a result, patents we may own or in-license may not provide us with adequate and continuing patent protection sufficient to exclude others from commercializing drugs similar or identical to our current or future product candidates, including generic versions of such drugs.

Other parties have developed technologies that may be related or competitive to our own, and such parties may have filed or may file patent applications, or may have received or may receive patents, claiming inventions that may overlap or conflict with those claimed in our own patent applications or issued patents, with respect to either the same compounds, methods, formulations or other subject matter, in either case that we may rely upon to dominate our patent position in the market. Publications of discoveries in the scientific literature often lag behind the actual discoveries, and patent applications in the U.S. and other jurisdictions are typically not published until at least 18 months after the earliest priority date of the patent filing, or, in some cases, not at all. Therefore, we cannot know with certainty whether we were the first to make the inventions claimed in patents we may own or in-license patents or pending patent applications, or that we were the first to file for patent protection of such inventions. As a result, the issuance, scope, validity, enforceability and commercial value of our patent rights cannot be predicted with any certainty.

In addition, the patent prosecution process is expensive and time-consuming, and we may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. Further, with respect to certain pending patent applications covering our current or future product candidates, prosecution has yet to commence. Patent prosecution is a lengthy process, during which the scope of the claims initially submitted for examination by the relevant patent office(s) may be significantly narrowed by the time they issue, if they ever do. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection. Prosecution could require that claim scope narrow such that a clinical or product candidate or program is not adequately protected by the patent. Moreover, in some circumstances, we may not have the right to control the preparation, filing and prosecution of patent applications, or to maintain the patents, covering technology that we license from or to third parties. Therefore, these patents and applications may not be prosecuted and enforced in a manner consistent with the best interests of our business.

Even if we acquire patent protection that we expect should enable us to establish and/or maintain a competitive advantage, third parties may challenge the validity, enforceability or scope thereof, which may result in such patents being narrowed, invalidated or held unenforceable. The issuance of a patent is not conclusive as to its inventorship, scope, validity or enforceability, and our patents may be challenged in the courts or patent offices in the U.S. and abroad. We may become involved in post-grant proceedings such as opposition, derivation, reexamination, inter partes review, post-grant review, invalidation, or interference proceedings challenging our patent rights or the patent rights of others from whom we may in the future obtain licenses to such rights, in the U.S. Patent and Trademark Office, or USPTO, the European Patent Office, or EPO, or in other countries. In addition, we may be subject to a third-party submission to the USPTO, the EPO, or elsewhere, that may reduce the scope or preclude the granting of claims from our pending patent applications. Competitors may allege that they invented the inventions claimed in our issued patents or patent applications prior to us, or may file patent applications before we do. Competitors may also claim that we are infringing their patents and that we therefore cannot practice our technology as claimed under our patents or patent applications. Competitors may also contest our patents by claiming to an administrative patent authority or judge that the invention was not patent-eligible, was not original, was not novel, was obvious, and/or lacked inventive step, and/or that the patent application filing failed to meet relevant requirements relating to description, basis, enablement, clarity, and/or support; in litigation, a competitor could claim that our patents, if issued, are not valid or are unenforceable for a number of reasons. If a court or administrative patent authority agrees, we would lose our protection of those challenged patents.

In addition, we may in the future be subject to claims by our former employees or consultants asserting an ownership right in our patents or patent applications, as a result of the work they performed on our behalf. Although we generally require all of our employees, consultants and advisors and any other third parties who have access to our proprietary know-how, information or technology to assign or grant similar rights to their inventions to us, we cannot be certain that we have executed such agreements with all parties who may have contributed to our intellectual property, nor can we be certain that our agreements with such parties will be upheld in the face of a potential challenge, or that they will not be breached, for which we may not have an adequate remedy.

An adverse determination in any such submission or proceeding may result in loss of exclusivity or freedom to operate or in patent claims being narrowed, invalidated or held unenforceable, in whole or in part, which could limit our ability to stop others from using or commercializing similar or identical technology and drugs, without payment to it, or could limit the duration of the patent

68

protection covering our technology and current or future product candidates. Such challenges may also result in our inability to manufacture or commercialize our current or future product candidates without infringing third-party patent rights. In addition, if the breadth or strength of protection provided by our patents and patent applications is threatened, it could dissuade companies from collaborating with us to license, develop or commercialize current or future product candidates.

Even if they are unchallenged, our issued patents and our pending patent applications, if issued, may not provide us with any meaningful protection or prevent competitors from designing around our patent claims to circumvent patents we may own or in-license by developing similar or alternative technologies or products in a non-infringing manner. For example, a third-party may develop a competitive product that provides benefits similar to one or more of our current or future product candidates but that has a different composition that falls outside the scope of our patent protection. If the patent protection provided by the patents and patent applications we hold or pursue with respect to our current or future product candidates is not sufficiently broad to impede such competition, our ability to successfully commercialize our current or future product candidates could be negatively affected, which would harm our business.

Furthermore, even if we are able to issue patents with claims of valuable scope in one or more jurisdictions, we may not be able to secure such claims in all relevant jurisdictions, or in a sufficient number to meaningfully reduce competition. Our competitors may be able to develop and commercialize their products, including products identical to ours, in any jurisdiction in which we are unable to obtain, maintain or enforce such patent claims. Furthermore, generic manufacturers may develop, seek approval for and launch generic versions of our products, and may challenge the scope, validity or enforceability of our patents, requiring us to engage in complex, lengthy and costly litigation or other proceedings.

We also intend to rely on regulatory exclusivity for protection of our product candidates, if approved for commercial sale. Implementation and enforcement of regulatory exclusivity, which may consist of regulatory data protection and market protection, varies widely from country to country. Failure to qualify for regulatory exclusivity or failure to obtain or to maintain the extent or duration of such protections that we expect for our product candidates, if approved, could affect our decision on whether to market the products in a particular country or countries or could otherwise have an adverse impact on our revenue or results of operations.

Obtaining and maintaining our patent protection depends on compliance with various procedural, document submission, deadlines, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated if we fail to comply with these requirements. We may miss a filing deadline for patent protection on these inventions.

The USPTO and foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process and after issuance of any patent. In addition, periodic maintenance fees, renewal fees, annuity fees and/or various other government fees are required to be paid periodically. While an inadvertent lapse can, in some cases, be cured by payment of a late fee, or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Noncompliance events that could result in abandonment or lapse of a patent include, but are not limited to, failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents. In such an event, our competitors might be able to enter the market with similar or identical products or platforms, which could have a material adverse effect on our business prospects and financial condition.

If our trademarks and trade names for our products or company name are not adequately protected in one or more countries where we intend to market our products, we may delay the launch of product brand names, use different trademarks or tradenames in different countries, or face other potentially adverse consequences to building our product brand recognition.

Our trademarks or trade names may be challenged, infringed, diluted, circumvented or declared generic or determined to be infringing on other marks. We intend to rely on both registration and common law protection for our trademarks. We may not be able to protect our rights to these trademarks and trade names or may be forced to stop using these names, which we need for name recognition by potential partners or customers in our markets of interest. During the trademark registration process, we may receive Office Actions from the USPTO or from comparable agencies in foreign jurisdictions objecting to the registration of our trademark. Although we would be given an opportunity to respond to those objections, we may be unable to overcome such rejections. In addition, in the USPTO and in comparable agencies in many foreign jurisdictions, third parties are given an opportunity to oppose pending trademark applications and/or to seek the cancellation of registered trademarks. Opposition or cancellation proceedings may be filed against our trademark applications or registrations, and our trademark applications or registrations may not survive such proceedings. If we are unable to obtain a registered trademark or establish name recognition based on our trademarks and trade names, we may not be able to compete effectively and our business may be adversely affected.

If we are unable to adequately protect and enforce our trade secrets, our business and competitive position would be harmed.

In addition to the protection afforded by patents we may own or in-license, we seek to rely on trade secret protection, confidentiality agreements, and license agreements to protect proprietary know-how that may not be patentable, processes for which patents are

69

difficult to enforce and any other elements of our product discovery and development processes that involve proprietary know-how, information or technology that may not be covered by patents. Although we require all of our employees, consultants, advisors and any third parties who have access to our proprietary know-how, information, or technology to enter into confidentiality agreements, trade secrets can be difficult to protect and we have limited control over the protection of trade secrets used by our collaborators and suppliers. We cannot be certain that we have or will obtain these agreements in all circumstances and we cannot guarantee that we have entered into such agreements with each party that may have or have had access to our trade secrets or proprietary information.

Moreover, any of these parties might breach the agreements and intentionally or inadvertently disclose our trade secret information and we may not be able to obtain adequate remedies for such breaches. In addition, competitors may otherwise gain access to our trade secrets or independently develop substantially equivalent information and techniques. Furthermore, the laws of some foreign countries do not protect proprietary rights and trade secrets to the same extent or in the same manner as the laws of the U.S. As a result, we may encounter significant problems in protecting and defending our intellectual property both in the U.S. and abroad. If we are unable to prevent unauthorized material disclosure of our intellectual property to third parties, we will not be able to establish or maintain a competitive advantage in our market, which could materially adversely affect our business, financial condition, results of operations and future prospects.

Enforcing a claim that a party illegally disclosed or misappropriated a trade secret is difficult, expensive and time-consuming, and the outcome is unpredictable. If we choose to go to court to stop a third party from using any of our trade secrets, we may incur substantial costs. These lawsuits may consume our time and other resources even if we are successful. Although we take steps to protect our proprietary information and trade secrets, including through contractual means with our employees and consultants, third parties may independently develop substantially equivalent proprietary information and techniques or otherwise gain access to our trade secrets or disclose our technology. If any of our trade secrets were to be lawfully obtained or independently developed by a competitor or other third party, we would have no right to prevent them from using that technology or information to compete with us.

Thus, we may not be able to meaningfully protect our trade secrets. It is our policy to require our employees, consultants, outside scientific collaborators, sponsored researchers and other advisors to execute confidentiality agreements upon the commencement of employment or consulting relationships with us. These agreements provide that all confidential information concerning our business or financial affairs developed or made known to the individual or entity during the course of the party’s relationship with us is to be kept confidential and not disclosed to third parties except in specific circumstances. In addition, we take other appropriate precautions, such as physical and technological security measures, to guard against misappropriation of our proprietary technology by third parties. In the case of employees, the agreements provide that all inventions conceived by the individual, and which are related to our current or planned business or research and development or made during normal working hours, on our premises or using our equipment or proprietary information, are our exclusive property. Although we require all of our employees to assign their inventions to us, we may be unsuccessful in executing such an agreement with each party who, in fact, conceives or develops intellectual property that we regard as our own. The assignment of intellectual property rights may not be self-executing, or the assignment agreements may be ineffective or breached, and we may be forced to bring claims against third parties, or defend claims that they may bring against us, to determine the ownership of what we regard as our intellectual property. Such claims could have a material adverse effect on our business, financial condition, results of operations, and prospects.

We may initiate, become a defendant in or otherwise become party to lawsuits to protect or enforce our intellectual property rights, which could be expensive, time-consuming, and unsuccessful.

Competitors may infringe any patents we may own or in-license. In addition, any patents we may own or in-license also may become involved in inventorship, priority, validity or unenforceability disputes. To counter infringement or unauthorized use, we may be required to file infringement claims, which can be expensive and time-consuming. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful. In addition, in an infringement proceeding, a court may decide that one or more of any patents we may own or in-license is not valid or is unenforceable or that the other party’s use of our technology that may be patented falls under the safe harbor to patent infringement under 35 U.S.C. § 271(e)(1). There is also the risk that, even if the validity of these patents is upheld, the court may refuse to stop the other party from using the technology at issue on the grounds that any patents we may own or in-license do not cover the technology in question or that such third-party’s activities do not infringe our patent applications or any patents we may own or in-license. An adverse result in any litigation or defense proceedings could put one or more of any patents we may own or in-license at risk of being invalidated, held unenforceable, or interpreted narrowly and could put our patent applications at risk of not issuing. Such litigation or proceedings could substantially increase our operating losses and reduce the resources available for development activities or any future sales, marketing, patient support or distribution activities. We may not have sufficient financial or other resources to conduct such litigation or proceedings adequately. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than we can because of its greater financial resources and more mature and developed intellectual property portfolios. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our ability to compete in the marketplace.

70

Post-grant proceedings provoked by third parties or brought by or before the USPTO or other patent granting authority may be necessary to determine the validity or priority of inventions with respect to our patent applications or any patents we may own or in-license. These proceedings are expensive and an unfavorable outcome could result in a loss of our current patent rights and could require us to cease using the related technology or to attempt to license rights to us from the prevailing party. Our business could be harmed if the prevailing party does not offer us a license on commercially reasonable terms. In addition to potential USPTO post-grant proceedings, we may become a party to patent opposition proceedings in the EPO, or similar proceedings in other foreign patent offices or courts where our patents may be challenged. The costs of these proceedings could be substantial, and may result in a loss of scope of some claims or a loss of the entire patent. An unfavorable result in a post-grant challenge proceeding may result in the loss of our right to exclude others from practicing one or more of our inventions in the relevant country or jurisdiction, which could have a material adverse effect on our business. Litigation or post-grant proceedings within patent offices may result in a decision adverse to our interests and, even if we are successful, may result in substantial costs and distract our management and other employees. We may not be able to prevent, misappropriation of our trade secrets or confidential information, particularly in countries where the laws may not protect those rights as fully as in the U.S.

Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments. If securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common stock.