ITEM 1A. RISK FACTORS

Risk Factor Summary

Below is a summary of material factors that make an investment in our common stock speculative or risky. Importantly, this summary does not address all the risks and uncertainties that we face. Additional discussion of the risks and uncertainties summarized in this risk factor summary, as well as other risks and uncertainties that we face, can be found under “Cautionary Note Regarding Forward-Looking Statements” and “Risk Factors” in this Annual Report on Form 10-K. The below summary is qualified in its entirety by those more complete discussions of such risks and uncertainties.

•We have a limited operating history, have incurred significant losses since our inception, and anticipate that we will continue to incur significant losses in the foreseeable future;

•We have never generated revenue from product sales and may never achieve or maintain profitability;

•We are early in our development efforts and our business is dependent on our ability to advance our current and future product candidates through preclinical studies and clinical trials, obtain marketing approval and ultimately commercialize our current and future product candidates;

•We are highly dependent on the success of our lead product candidate, CNTY-101, which is currently undergoing a phase I clinical trial, and our other product candidates;

•We are highly dependent on our strategic relationships and collaborations and any termination or loss of significant rights under such arrangements with our strategic partners could seriously harm our business;

•The COVID-19 pandemic, or a similar global health crisis may materially and adversely affect our business and our financial results and could cause a disruption to the development of our product candidates;

•Utilizing CAR-iNK and CAR-iT cells represents a novel approach to immuno-oncology treatment of cancer, and we must overcome significant challenges in order to develop, commercialize, and manufacture our product candidates;

•Gene-editing is a rapidly developing technology, and our success is dependent upon our ability to effectively utilize this technology in our product candidates and implement future technological advancements in gene-editing;

•Preclinical and clinical development involve a lengthy and expensive process with an uncertain outcome. We may incur additional costs or experience delays in completing, or ultimately be unable to complete, the development and commercialization of our current product candidates or any future product candidates;

•As an organization, we have limited experience designing or implementing clinical trials. Failure to adequately design a trial, or incorrect assumptions about the design of the trial, could adversely affect the ability to initiate the trial, enroll patients, complete the trial, or obtain regulatory approval on the basis of the trial results, as well as lead to increased or unexpected costs;

•The manufacture and distribution of our iPSC-derived cell product candidates is complex and subject to a multitude of risks;

•We currently utilize our own manufacturing facility as well third parties for the manufacture of our product candidates for development. Operational issues with our own facility or with third party facilities could delay our development plans and thereby limit our ability to generate revenue;

Table of Contents

•We could become dependent on Bristol-Myers Squibb Company, or Bristol-Myers Squibb, for development and commercialization activities with respect to certain of our product candidates pursuant to our collaboration with Bristol-Myers Squibb and cannot control whether Bristol-Myers Squibb will devote sufficient attention or resources to this collaboration or proceed in an expeditious manner;

•If we are unable to successfully commercialize CNTY-101 or any of our other product candidates for which we receive regulatory approval, or experience significant delays in doing so, our business will be materially harmed;

•We face significant competition, and if our competitors develop product candidates more rapidly than we do or their product candidates are more effective, our ability to develop and successfully commercialize products may be adversely affected;

•We may face difficulties in obtaining, protecting, maintaining, and enforcing our intellectual property rights, including intellectual property rights that are licensed to us;

•We do not currently own any issued patents relating to our product candidates;

•Unstable market and economic conditions, including inflation and political unrest, may have serious adverse consequences on our business, financial condition, and stock price;

•The trading price of the shares of our common stock could be highly volatile, and purchasers of our common stock could incur substantial losses; and

•Our executive officers, directors, principal stockholders, and affiliates continue to exercise significant control over our company, which limits the ability of our other stockholders to influence corporate matters and could delay or prevent a change in corporate control.

Risk Factors

The following risk factors and other information included in this Annual Report on Form 10-K should be carefully considered. The risks described below are not the only ones facing us. The occurrence of any of the following risks, or of additional risks and uncertainties not presently known to us or that we currently believe to be immaterial, could significantly harm our business, financial condition, results of operations and growth prospects.

Risks related to our financial position and capital requirements

Our limited operating history may make it difficult for you to evaluate the success of our business to date and to assess our future viability.

We are an early stage biopharmaceutical company with a limited operating history. Our operations to date have been limited raising capital, conducting discovery and research activities, filing patent applications, identifying potential product candidates, undertaking preclinical studies, in-licensing intellectual property, establishing manufacturing processes and initiating a phase I clinical trial. All but one of our product candidates are still in the discovery and preclinical testing phase, and in February 2023, we began dosing patients in our first phase I clinical trial, ELiPSE-1, evaluating CNTY-101. We have not yet demonstrated our ability to successfully complete a clinical trial, or submit a biologics license application, or BLA, for a product candidate, obtain regulatory approval for any product candidate, manufacture a product at a commercial-scale or arrange for a third party to do so on our behalf, or conduct sales, marketing, and distribution activities necessary for successful product commercialization. Consequently, any assumptions you make about our future success or viability may not be as informed as they could be if we had a longer operating history.

Table of Contents

We have incurred significant operating losses since our inception and expect to incur significant losses for the foreseeable future.

We have incurred significant operating losses since our inception. If our product candidates are not successfully developed and approved, we may never generate any revenue. Our net losses for the years ended December 31, 2022 and 2021 were $130.9 million and $95.8 million, respectively. As of December 31, 2022, we had an accumulated deficit of $519.1 million.

Substantially all of our losses have resulted from expenses incurred in connection with our research and development programs, the preparation and inception of our phase I clinical trial, ELiPSE-1, the acquisition of IPR&D and from general and administrative costs associated with our operations. All of our product candidates will require the expenditure of substantial additional development time and resources before we would be able to apply for or receive regulatory approvals and begin realizing product sales. We expect to continue to incur losses for the foreseeable future, and we anticipate these losses will increase as we continue our development of, seek regulatory approval for, and potentially commercialize any of our product candidates and seek to identify, assess, acquire, in-license, or develop additional product candidates. Our prior losses, combined with expected future losses, have had and will continue to have a negative effect on our stockholders’ deficit and working capital.

We expect that it will be several years, if ever, before we have a commercialized product. We anticipate that our expenses will increase substantially if, and as, we:

●continue to advance our induced pluripotent stem cells, or iPSC-derived allogeneic, cell therapy platforms;

●continue the clinical development of CNTY-101 and the preclinical and clinical development of our other product candidates;

●seek to discover and develop additional product candidates;

●establish and validate our own clinical-scale current good manufacturing practices, or cGMP, facilities;

●seek regulatory approvals for any of our other product candidates that successfully complete clinical trials;

●maintain, expand, protect, and enforce our intellectual property portfolio;

●acquire or in-license other product candidates and technologies;

●incur additional costs associated with operating as a public company, such as operational, financial, and management information systems and personnel, including personnel to support our drug development, any future commercialization efforts; and

●increase our employee headcount and related expenses to support these activities.

We may never succeed in any or all of these activities and, even if we do, we may never generate revenue.

We have never generated revenue from product sales and may never achieve or maintain profitability.

Table of Contents

We have one product candidate in clinical development and no product candidates approved for commercial sale and have not generated any revenue. To become and remain profitable, we must develop and eventually commercialize product candidates with significant market potential, which will require us to be successful in a range of challenging activities. These activities can include completing preclinical studies and initiating and completing clinical trials of our product candidates, obtaining marketing approval for these product candidates, manufacturing, marketing, and selling those products that are approved and satisfying any post-marketing requirements. We may never succeed in any or all of these activities and, even if we do, we may never generate sufficient revenues to achieve profitability. Because of the numerous risks and uncertainties associated with biologics product development, we are unable to accurately predict the timing or amount of increased expenses or when, or if, we will be able to achieve profitability.

Even if we do achieve profitability, we may not be able to sustain or increase profitability. Our failure to become and remain profitable would decrease the value of our company and could impair our ability to raise capital, maintain our research and development efforts, expand our business, or continue our operations.

We will require additional funding in order to finance operations. If we are unable to raise capital when needed, or on acceptable terms, we could be forced to delay, reduce, or eliminate our product development programs or commercialization efforts.

Developing biopharmaceutical products, including conducting preclinical studies and clinical trials, is a very time-consuming, expensive, and uncertain process that takes years to complete. Our operations have consumed substantial amounts of cash since inception, and we expect our expenses to increase in connection with our ongoing activities, particularly as we conduct preclinical activities and clinical trials of, and seek regulatory and marketing approval for, our product candidates. Even if one or more of our product candidates is approved for commercial sale, we anticipate incurring significant costs associated with commercializing any approved product candidate. We have financed our operations primarily through private placements of our securities and our initial public offering of common stock, or IPO, which closed in June 2021. Our research and development expenses increased from $75.7 million for the year ended December 31, 2021 to $97.2 million for the year ended December 31, 2022. As of December 31, 2022, we had cash, and cash equivalents of $84.3 million and investments of $283.1 million. Based on our research and development plans, we believe our existing cash, cash equivalents and investments will be sufficient to fund our operating expenses and capital expenditures requirements into 2026.

Attempting to secure additional financing will divert our management from our day-to-day activities, which may impair or delay our ability to develop our product candidates. In addition, demands on our cash resources may change as a result of many factors currently unknown to us including, but not limited to, any unforeseen costs we may incur as a result of preclinical study or clinical trial delays, and we may need to seek additional funds sooner than planned. If we are unable to obtain funding on a timely basis or at all, we may be required to significantly curtail or stop one or more of our research or development programs.

Raising additional capital may cause dilution to our stockholders, restrict our operations or require us to relinquish rights to our technologies or product candidates.

Table of Contents

Until and unless we can generate substantial product revenue, we expect to finance our cash needs through a combination of equity offerings and debt financings, and potentially through additional license and development agreements or strategic partnerships or collaborations with third parties. Financing may not be available in sufficient amounts or on reasonable terms. In addition, market volatility resulting from inflation, pandemics, political unrest and hostilities, or other factors could adversely impact our ability to access capital as and when needed. We have no commitments for any additional financing, and will likely be required to raise such financing through the sale of additional securities. If we sell equity or equity-linked securities, our current stockholders may be diluted, and the terms may include liquidation or other preferences that are senior to or otherwise adversely affect the rights of our stockholders. In July 2022, we entered into a sales agreement with Cowen and Company, LLC, or Cowen, pursuant to which we may offer and sell shares of our common stock having an aggregate offering price of up to $150 million from time to time through Cowen acting as our sales agent, or the 2022 ATM Facility. There have been no sales of shares of our common stock under the 2022 ATM Facility through the date of the filing of this Annual Report on Form 10-K. Moreover, if we issue debt, we may need to dedicate a substantial portion of our operating cash flow to paying principal and interest on such debt and we may need to comply with operating restrictions, such as limitations on incurring additional debt, which could impair our ability to acquire, sell, or license intellectual property rights and impede our ability to conduct our business. Furthermore, the issuance of additional securities, whether equity or debt, by us, or the possibility of such issuance, may cause the market price of our common stock to decline.

If we raise funds through additional licensing or collaboration arrangements with third parties, we may have to relinquish valuable rights to our product candidates or grant licenses under our intellectual property on terms that are not favorable to us. In addition, we may seek additional capital due to favorable market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans. Because of the numerous risks and uncertainties associated with product development, we are unable to predict the timing or amount of increased expenses or when or if we will be able to achieve or maintain profitability.

Our ability to utilize our net operating loss carryforwards and certain other tax attributes may be limited.

To the extent that we continue to generate taxable losses, subject to certain limitations, unused losses will carryforward to offset future taxable income, if any, until such unused losses expire. Under Section 382 of the Internal Revenue Code of 1986, as amended, or the Code, if a corporation undergoes an ownership change (generally defined as a greater than 50 percentage points change (by value) in its equity ownership over a rolling three-year period), the corporation’s ability to use its pre-change net operating losses and other pre-change tax attributes to offset its post-change income may be limited. We were formed in 2018 as Century Therapeutics, Inc., or Prior Century. In 2019, in connection with our investment from Bayer Prior Century contributed substantially all of its operating assets and cash to a newly formed entity, Century Therapeutics, LLC. Our business was operated through Century Therapeutics, LLC, until February 2021, at which time we converted into a Delaware C corporation. Upon completion of this conversion, Prior Century, whose only significant asset was its equity investment in Century Therapeutics, LLC, merged with the C corporation, and in connection therewith the C corporation changed its name to “Century Therapeutics, Inc.” We believe that Prior Century or we may have experienced an ownership change in the past, which may affect our ability to utilize our net operating loss carryforwards. In addition, we may experience ownership changes in the future as a result of shifts in our stock ownership, some of which are outside our control. Similar limitations will apply to our ability to carry forward any unused tax credits to offset future taxable income.

Changes in tax law may adversely affect us or our investors.

The rules dealing with U.S. federal, state and local income taxation are constantly under review by persons involved in the legislative process and by the Internal Revenue Service and the U.S. Treasury Department. Changes to tax laws (which changes may have retroactive application) could adversely affect us or holders of our common stock. For example, under Section 174 of the Code, in taxable years beginning after December

Table of Contents

31, 2021, expenses that are incurred for research and development in the U.S. will be capitalized and amortized, which may have an adverse effect on our cash flow. In recent years, many such changes have been made, and changes are likely to continue to occur in the future. It cannot be predicted whether, when, in what form or with what effective dates tax laws, regulations and rulings may be enacted, promulgated or issued, which could result in an increase in our or our shareholders’ tax liability or require changes in the manner in which we operate in order to minimize or mitigate any adverse effects of changes in tax law.

Table of Contents

Our Option Agreement with Bayer HealthCare LLC may require us to sell certain of our product candidates, which may limit the value we could generate from our product candidates.

We are party to an option agreement, or the Option Agreement, with Bayer HealthCare LLC, or Bayer, pursuant to which Bayer was granted certain bidding rights relating to the potential transfer of rights with respect to certain product candidates being researched and developed by us which are comprised of allogeneic iPSC-derived natural killer cells, macrophages or dendritic cells, which we refer to as the Research Products. Under the Option Agreement, Bayer was granted a right of first refusal, or ROFR, to submit bids for the transfer or license of rights to research, develop and/or commercialize certain Research Products, which we refer to as the Research Product Rights.. While CNTY-101 is no longer included in the Bayer option rights, any other wholly owned product candidate comprised of iNK cells that we develop in the future are subject to the terms of the Option Agreement. Bayer may exercise its ROFR for up to four of the first ten Research Products for which an IND is submitted, subject to certain limitations.

If Bayer exercises its ROFR for one of our Research Products, we may be required to transfer such Research Product (by sale, license, or other structure to be negotiated) to Bayer for a market value as determined by our board of directors, and such determination of market value may ultimately prove to be lower than the actual realizable value of applicable Research Product. There can be no guarantee that we will utilize the proceeds received in connection with the exercise of Bayer’s ROFR in a manner which will provide us with greater value than if we had retained the Research Product or sold such Research Product to another party. Any failure to realize or utilize the full value of our Research Products due to the Option Agreement could have a material adverse effect on our business, financial condition, and results of operation.

Unstable market and economic conditions may have serious adverse consequences on our business, financial condition, and stock price.

The global credit and financial markets have experienced extreme volatility and disruptions in the past several years, including severely diminished liquidity and credit availability, declines in consumer confidence, declines in economic growth, increases in unemployment rates and uncertainty about economic stability. We cannot assure you that further deterioration in credit and financial markets and confidence in economic conditions will not occur. Our general business strategy and ability to raise capital may be adversely affected by any such economic downturn, volatile business environment, or continued unpredictable and unstable market conditions, including as a result of liquidity constraints, failures and instability in U.S. and international financial banking systems. If the current equity and credit markets deteriorate further, or fail to improve, it may make any necessary debt or equity financing more difficult, more costly, and more dilutive. Failure to secure any necessary financing in a timely manner and on favorable terms could have a material adverse effect on our growth strategy, financial performance, and stock price and could require us to delay or abandon clinical development plans. In addition, there is a risk that one or more of our current service providers, manufacturers, and other partners may not survive these difficult economic times, which could directly affect our ability to attain our operating goals on schedule and on budget.

In addition, the stock markets have experienced extreme price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies, including in connection with the COVID-19 pandemic, which has resulted in decreased stock prices for many companies notwithstanding the lack of a fundamental change in their underlying business models or prospects. These fluctuations have often been unrelated or disproportionate to the operating performance of those companies. Further, the impacts of political unrest, including as a result geopolitical tension, such as a deterioration in the relationship between the United States and China or the conflict between Russia and Ukraine, including any additional sanctions, export controls or other restrictive actions that may be imposed by the United States and/or other countries against governmental or other entities could lead to disruption, instability and volatility in the global markets, which may have an adverse impact on our business or ability to access the capital markets. Broad market and industry factors, including potentially worsening economic conditions and other adverse effects, or developments relating to pandemics, political, regulatory, and other market conditions, may negatively affect the market price of shares of our common stock, regardless of our actual operating performance.

Table of Contents

Adverse developments affecting the financial services industry, such as actual events or concerns involving liquidity, defaults or non-performance by financial institutions or transactional counterparties, could adversely affect our current and projected business operations and financial condition and results of operations.

Events involving limited liquidity, defaults, non-performance or other adverse developments that affect financial institutions, transactional counterparties or other companies in the financial services industry or the financial services industry generally, or concerns or rumors about any events of these kinds or other similar risks, have in the past and may in the future lead to market-wide liquidity problems. Most recently, on March 10, 2023, Silicon Valley Bank (“SVB”) was closed by the California Department of Financial Protection and Innovation, which appointed the Federal Deposit Insurance Corporation (“FDIC”) as receiver. Similarly, on March 12, 2023, Signature Bank and Silvergate Capital Corp. were each swept into receivership. Although a statement by the Department of the Treasury, the Federal Reserve and the FDIC indicated that all depositors of SVB would have access to all of their money after only one business day of closure, including funds held in uninsured deposit accounts, borrowers under credit agreements, letters of credit and certain other financial instruments with SVB, Signature Bank or any other financial institution that is placed into receivership by the FDIC may be unable to access undrawn amounts thereunder. Even though we assess our banking and customer relationships as we believe necessary or appropriate, our access to funding sources and other credit arrangements in amounts adequate to finance or capitalize our current and projected future business operations could be significantly impaired by factors that affect us, the financial services industry or economy in general. These factors could include, among others, events such as liquidity constraints or failures, the ability to perform obligations under various types of financial, credit or liquidity agreements or arrangements, disruptions or instability in the financial services industry or financial markets, or concerns or negative expectations about the prospects for companies in the financial services industry.

Table of Contents

In addition, investor concerns regarding the U.S. or international financial systems could result in less favorable commercial financing terms, including higher interest rates or costs and tighter financial and operating covenants, or systemic limitations on access to credit and liquidity sources, thereby making it more difficult for us to acquire financing on acceptable terms or at all. Any decline in available funding or access to our cash and liquidity resources could, among other risks, adversely impact our ability to meet our operating expenses, financial obligations or fulfill our other obligations, result in breaches of our contractual obligations or result in violations of federal or state wage and hour laws. Any of these impacts, or any other impacts resulting from the factors described above or other related or similar factors not described above, could have material adverse impacts on our liquidity and our business, financial condition or results of operations.

Risks related to our business and industry

We are very early in our development efforts. Our business is dependent on our ability to advance our current and future product candidates through preclinical studies and clinical trials, obtain marketing approval, and ultimately commercialize them.

We are very early in our development efforts and we have only recently initiated out first Phase 1 clinical trial for CNTY-101. Additionally, we are actively engaged in a number of earlier stage discovery programs that may never advance to clinical-stage development. Our ability to generate product revenue, which we do not expect will occur for many years, if ever, will depend heavily on the successful development and eventual commercialization of our product candidates, which may never occur. We currently generate no revenue from product sales and we may never be able to develop or commercialize a marketable product.

Each of our product candidates will require additional preclinical and/or clinical development, regulatory approval in multiple jurisdictions, obtaining manufacturing supply, capacity and expertise, building a commercial organization, or successfully outsourcing commercialization, substantial investment, and significant marketing efforts before we generate any revenue from product sales. Our product candidates must be authorized for marketing by the U.S. Food and Drug Administration, or the FDA, or certain other foreign regulatory agencies before we may commercialize our product candidates.

The clinical and commercial success of our product candidates will depend on several factors, including the following:

●timely and successful completion of preclinical studies, including toxicology studies, biodistribution studies, and minimally efficacious dose studies in animals, where applicable, and in accordance with Good Laboratory Practices, or GLPs;;

●effective INDs or comparable foreign applications that allow commencement of our planned clinical trials or future clinical trials for our product candidates;

●successful enrollment and completion of clinical trials, including under the FDA’s current Good Clinical Practices, or cGCPs, and GLPs;

●positive results from our ongoing, planned and future clinical programs that support a finding of safety and effectiveness and an acceptable risk-benefit profile of our product candidates in the intended populations;

●receipt of marketing approvals from applicable regulatory authorities;

●establishment of arrangements with CMOs for clinical supply and, where applicable, commercial manufacturing capabilities;

●establishment and maintenance of patent and trade secret protection, and/or regulatory exclusivity for our product candidates

Table of Contents

●commercial launch of our product candidates, if approved, whether alone or in collaboration with others;

●acceptance of the benefits and use of our product candidates, including method of administration, if and when approved, by patients, the medical community, and third-party payors;

●effective competition with other therapies;

●establishment and maintenance of healthcare coverage and adequate reimbursement and patients’ willingness to pay out-of-pocket in the absence of such coverage and adequate reimbursement;

●establishment of a physician training system and network for administration of our product candidates;

●enforcement and defense of intellectual property rights and claims; and

●maintenance of a continued acceptable safety, tolerability, and efficacy profile of our product candidates following approval.

If we do not succeed in one or more of these factors in a timely manner or at all, we could experience significant delays or an inability to successfully commercialize our product candidates, if approved, which would materially harm our business. If we are unable to advance our product candidates to clinical development, obtain regulatory approval, and ultimately commercialize our product candidates, or experience significant delays in doing so, our business will be materially harmed.

Our business is highly dependent on the success of our lead product candidate, CNTY-101 and our other product candidates.

While we have successfully initiated the clinical development of CNTY-101, we cannot guarantee that an IND application will be cleared to proceed after submission to the FDA for any of our other product candidates or that CNTY-101 or our other product candidates will be approved for commercialization, on a timely basis or at all. Although certain of our employees have prior experience with clinical trials and regulatory approvals, we have not previously completed any clinical trials or submitted a BLA to the FDA, or similar regulatory approval filings to comparable foreign authorities, for any product candidate, and we cannot be certain that CNTY-101 or our other product candidates will be successful in clinical trials or receive regulatory approval. The FDA and other comparable global regulatory authorities can delay, limit, or deny approval of a product candidate for many reasons. Any delay in obtaining, or inability to obtain, applicable regulatory approval will delay or harm our ability to successfully develop and commercialize CNTY-101 or our other product candidates and materially adversely affect our business, financial condition, results of operations, and growth prospects.

Furthermore, if our clinical trials of CNTY-101 or our other product candidates encounter safety, efficacy, or manufacturing problems, development delays, regulatory issues, or other problems, our development plans for such product candidates in our pipeline could be significantly impaired, which could materially adversely affect our business, financial condition, results of operations, and growth prospects.

We may also evaluate our product candidates in combination with one or more other cancer therapies that have not yet been approved for marketing by the FDA or similar regulatory authorities outside of the United States. If the FDA or similar regulatory authorities outside of the United States do not approve these other drugs or revoke their approval of, or if safety, efficacy, manufacturing, or supply issues arise with, the drugs we choose to evaluate in combination with any product candidate we develop or combination therapy, we may be unable to obtain approval of or market our product candidates.

Table of Contents

Our business depends upon the success of our iPSC-derived allogeneic cell therapy platforms.

Our success depends on our ability to utilize our iPSC-derived allogeneic cell therapy platforms to generate chimeric antigen receptors, or CAR-iNK and CAR-iT cell product candidates, to obtain regulatory approval for product candidates derived from it, and to then commercialize our product candidates addressing one or more indications. Though iPSC-derived cell therapy product candidates have been evaluated by others in clinical trials, our product candidates have never been evaluated in human clinical trials, and we may experience unexpected or adverse results in the future. We are exposed to a number of unforeseen risks and it is difficult to predict the types of challenges and risks that we may encounter during development of our product candidates. All of our product candidates developed from our iPSC allogeneic cell therapy platforms will require significant clinical and non-clinical development, review and approval by the FDA or other regulatory authorities in one or more jurisdictions, substantial investment, access to sufficient commercial manufacturing capacity, and significant marketing efforts before they can be successfully commercialized. If any of our product candidates encounter safety or efficacy problems, developmental delays, or regulatory issues or other problems, such problems could impact the development plans for our other product candidates because all of our product candidates are based on the same core iPSC technology.

Additionally, a key element of our strategy is to use and expand our iPSC allogeneic cell therapy platforms to build a pipeline of product candidates and progress those product candidates through clinical development for the treatment of a variety of different types of diseases. Although our research and development efforts to date have been focused on identifying a pipeline of product candidates, we may not be able to develop product candidates that a regulatory agency, such as the FDA, will consider safe and effective. Even if we are successful in building our pipeline, the potential product candidates that we identify may not be suitable for clinical development, including as a result of being shown to have harmful side effects or other characteristics that indicate that they are unlikely to be approvable or marketable and achieve market acceptance. If we do not successfully develop, obtain approval for, and begin to commercialize any product candidates for which we receive approval, we will face difficulty in obtaining product revenue in future periods, which could result in significant harm to our financial position and adversely affect our share price.

Utilizing CAR-iNK and CAR-iT cells represents a novel approach to immuno-oncology treatment of cancer, and we must overcome significant challenges in order to develop, commercialize, and manufacture our product candidates.

We have concentrated our research and development efforts on developing CAR-iNK and CAR-iT cell therapies. The processes and requirements imposed by the FDA or other applicable regulatory authorities may cause delays and additional costs in obtaining approvals for our product candidates. Because our iPSC-derived allogeneic cell therapy platforms are novel, and cell-based therapies are relatively new, regulatory agencies may lack experience in evaluating our product candidates utilizing CAR-iNK and CAR-iT cells. This novelty may lengthen the regulatory review process, including the time it takes for the FDA to review our IND applications, if and when submitted, increase our development costs, and delay or prevent commercialization of our iPSC-derived allogeneic cell therapy platform products. Additionally, advancing novel immuno-oncology cell therapies creates significant challenges for us, including:

●developing and sustaining a manufacturing process to produce our cells on a large scale and in a cost-effective manner;

●educating medical personnel regarding the potential side-effect profile of our cells and, as the clinical program progresses, on any observed side effects with the therapy;

●unanticipated technical limitations of our CRISPR-MAD7 gene editing technology; and

●establishing sales and marketing capabilities, as well as developing a distribution network to support the commercialization of any approved products.

Table of Contents

We must be able to overcome these challenges in order for us to successfully develop, commercialize, and manufacture our product candidates utilizing CAR-iNK and CAR-iT cells.

We have not yet demonstrated long-term stability of cryopreserved CAR-iNK cells.

We have not yet demonstrated long-term stability of cryopreserved CAR-iNK cells and, therefore, do not know if we will be able to store the cryopreserved cells for extended periods of time. If we are unable to demonstrate long-term stability, we will need to reduce the manufacturing batch size to ensure that the material we produce will be used before it expires. In that case, the scaling of our production processes will not deliver the efficiencies we expect, and the cost per dose of our product candidates will be substantially higher. We may also encounter difficulties not only in developing freezing and thawing methodologies for large-scale use, but also in obtaining the necessary regulatory approvals for using such methodologies in treatment. If we cannot adequately demonstrate similarity of our frozen product to the unfrozen form to the satisfaction of the FDA, we could face substantial delays in our regulatory approvals.

Gene-editing is a rapidly developing technology, and our success is dependent upon our ability to effectively utilize this technology in our product candidates and implement future technological advancements in gene-editing.

We use CRISPR-based nuclease to enable precise editing of the iPSC genome. For CNTY-101, we used the nuclease Cpf-1 but have shifted to CRISPR-MAD7 for all subsequent product candidates, and we may utilize CRISPR-MAD7 for CNTY-101 in the future. We decided to shift to CRISPR-MAD7 because we entered into a license agreement with Inscripta, Inc. and obtained a non-exclusive, royalty-free, irrevocable license to a patent portfolio covering the composition, production and use of CRISPR-MAD7. We have optimized the protocols to produce CRISPR-MAD7 and have achieved similar cutting and HDR efficiencies compared to Cpf-1, but we don’t have as much experimental data with CRISPR-MAD7 as we do with Cpf1. We may encounter technical liabilities associated with CRISPR-MAD7 that could force us to use a different CRISPR nuclease which could delay our programs and require us to enter into a license agreement for additional technology, which may not be available on commercially reasonable terms or at all.

Our gene-editing technology may create unintended changes to the DNA such as a non-target site gene-edit, a large deletion, or a DNA translocation, any of which could impact timelines for new product generation. We have developed various genome characterization assays to identify deletions/insertions that can occur as a result of gene editing.

Although we believe CAR-iNK and CAR-iT based therapies do not require further modification to avoid the risk of graft versus host disease, or GvHD, the gene-editing of our product candidates utilizing CAR-iNK and CAR-iT cells may not be successful in limiting the risk of GvHD or premature rejection by patients.

In addition, the cell therapy industry is rapidly developing, and our competitors may introduce new gene-editing technologies that render our technology less attractive. Competitive pressures may force us to implement new gene-editing technologies at a substantial cost or delay in our clinical development process. In addition, our competitors may have greater financial, technical and personnel resources that allow them to implement new gene-editing technologies before we can. We cannot be certain that we will be able to implement new gene-editing technologies on a timely basis or at a cost that is acceptable to us. If we are unable to implement technological advancements consistent with industry standards, our operations and financial condition may be adversely affected.

Table of Contents

Our product candidates for which we intend to seek approval as biologic products may face competition sooner than anticipated.

The Affordable Care Act, or the ACA, includes a subtitle called the Biologics Price Competition and Innovation Act of 2009, or BPCIA, which created an abbreviated approval pathway for biological products that are biosimilar to or interchangeable with an FDA-licensed reference biological product. Under the BPCIA, an application for a highly similar or “biosimilar” product may not be submitted to the FDA until four years following the date that the reference product was first approved by the FDA. In addition, the approval of a biosimilar product may not be made effective by the FDA until 12 years from the date on which the reference product was first approved. During this 12-year period of exclusivity, another company may still market a competing version of the reference product if the FDA approves a full BLA for the competing product containing the sponsor’s own preclinical data and data from adequate and well-controlled clinical trials to demonstrate the safety, purity, and potency of their product. The law is complex and is still being interpreted and implemented by the FDA. As a result, its ultimate impact, implementation, and meaning are subject to uncertainty. In addition, complexities associated with the larger, and often more complex, structures of biological products such as cell and gene products we are developing, as well as the processes by which such products are manufactured, pose significant hurdles to implementation of the abbreviated approval pathway that are still being worked out by the FDA.

We believe that any of our product candidates approved as a biological product under a BLA should qualify for the 12-year period of exclusivity. However, there is a risk that this exclusivity could be shortened due to congressional action or otherwise, or that the FDA will not consider our product candidates to be reference products for competing products, potentially creating the opportunity for competition sooner than anticipated. Other aspects of the BPCIA, some of which may impact the BPCIA exclusivity provisions, have also been the subject of recent litigation. Moreover, the extent to which a biosimilar, once approved, will be substituted for any one of our reference products in a way that is similar to traditional generic substitution for non-biological products is not yet clear, and will depend on a number of marketplace and regulatory factors that are still developing.

Jurisdictions in addition to the United States have established abbreviated pathways for regulatory approval of biological products that are biosimilar to earlier approved reference products. For example, the European Union has had an established regulatory pathway for biosimilars since 2004. However, biosimilars can only be authorized once the period of data exclusivity on the reference biological medicine has expired.

The increased likelihood of biosimilar competition has increased the risk of loss of innovators’ market exclusivity. Due to this risk, and uncertainties regarding patent protection, if our product candidates are approved for marketing, it is not possible to predict the length of market exclusivity for any particular product with certainty based solely on the expiration of the relevant patent(s) or the current forms of regulatory exclusivity. It is also not possible to predict changes in United States regulatory law that might reduce biological product regulatory exclusivity. The loss of market exclusivity for a product would likely materially and negatively affect revenues and we may not generate adequate or sufficient revenues from them or be able to reach or sustain profitability.

Preclinical and clinical development involve a lengthy and expensive process with an uncertain outcome. We may incur additional costs or experience delays in completing, or ultimately be unable to complete, the development and commercialization of our current product candidates or any future product candidates.

Table of Contents

All but one of our product candidates are in preclinical development and the risk of failure for all of our product candidates is high. It is impossible to predict when or if any of our discovery or product candidates will receive regulatory approval. To obtain the requisite regulatory approvals to commercialize any product candidates, we must demonstrate through extensive preclinical studies and lengthy, complex, and expensive clinical trials that our product candidates are safe and effective in humans. Clinical testing can take many years to complete, and its outcome is inherently uncertain. Failure can occur at any time during the clinical trial process.

The results of preclinical studies and early clinical trials or early cohorts of our clinical trials of our product candidates may not be predictive of the results of later-stage clinical trials or later cohorts of our clinical trials. Our initial clinical trials will begin with relatively small cohorts before expanding in size in subsequent cohorts. The initial cohorts of early-stage clinical trials often involve enrollment of a small number of patients and may not be as predictive as trials with larger cohorts. Additionally, if safety issues arise in an early cohort, we may be delayed or prevented from subsequently expanding into larger trial cohorts. We may be unable to establish clinical endpoints that applicable regulatory authorities would consider clinically meaningful, and a clinical trial can fail at any stage of testing. Differences in trial design between early-stage clinical trials and later-stage clinical trials make it difficult to extrapolate the results of earlier clinical trials to later clinical trials.

Moreover, clinical data is often susceptible to varying interpretations and analyses, and many companies that have believed their product candidates performed satisfactorily in clinical trials have nonetheless failed to obtain marketing approval of their products. A number of companies in the biopharmaceutical industry have suffered significant setbacks in advanced clinical trials due to lack of efficacy or unfavorable safety profiles, notwithstanding promising results in earlier trials. There is typically a high rate of failure of product candidates proceeding through clinical trials. Most product candidates that commence clinical trials are never approved as products and there can be no assurance that any of our current clinical trials or future clinical trials, if allowed to proceed, will ultimately be successful or support clinical development of our current or any of our future product candidates.

We may experience delays in initiating or completing clinical trials. We also may experience numerous unforeseen events during, or as a result of, any of our current clinical trials or future clinical trials that we could conduct that could delay or prevent our ability to receive marketing approval or commercialize our lead product candidates or any future product candidates, including:

●regulators or institutional review boards, or IRBs, the FDA, or ethics committees may not authorize us or our investigators to commence a clinical trial or conduct a clinical trial at a prospective trial site;

●we may experience delays in reaching, or fail to reach, agreement on acceptable terms with prospective trial sites and prospective CROs as the terms of which can be subject to extensive negotiation and may vary significantly among different CROs and trial sites;

●clinical trial sites deviating from trial protocol or dropping out of a trial;

●clinical trials of any product candidates may fail to show safety or efficacy, produce negative or inconclusive results and we may decide, or regulators may require us, to conduct additional preclinical studies or clinical trials or we may decide to abandon product development programs;

●the number of subjects required for clinical trials of any product candidates may be larger than we anticipate, enrollment in these clinical trials may be slower than we anticipate, or subjects may drop out of these clinical trials or fail to return for post-treatment follow-up at a higher rate than we anticipate;

●our third-party contractors may fail to comply with regulatory requirements or meet their contractual obligations to us in a timely manner, or at all, or may deviate from the clinical trial protocol or drop out of the trial, which may require that we add new clinical trial sites or investigators;

Table of Contents

●we may elect to, or regulators, IRBs, or ethics committees may require that we or our investigators, suspend or terminate clinical research or trials for various reasons, including noncompliance with regulatory requirements or a finding that the participants in our trials are being exposed to unacceptable health risks;

●the cost of clinical trials of any of our product candidates may be greater than we anticipate;

●the quality of our product candidates or other materials necessary to conduct clinical trials of our product candidates may be inadequate to initiate or complete a given clinical trial;

●our inability to manufacture sufficient quantities of our product candidates for use in clinical trials;

●reports from clinical testing of other therapies may raise safety or efficacy concerns about our product candidates;

●our failure to establish an appropriate safety profile for a product candidate based on clinical or preclinical data for such product candidate as well as data emerging from other studies or trials in the same class as our product candidate; and

●the FDA or applicable foreign regulatory agencies may require us to submit additional data such as long-term toxicology studies, or impose other requirements before permitting us to initiate a clinical trial.

Patient enrollment, a significant factor in the timing of clinical trials, is affected by many factors including the size and nature of the patient population, the number and location of clinical sites we enroll, the proximity of patients to clinical sites, the eligibility and exclusion criteria for the trial, the design of the clinical trial, the inability to obtain and maintain patient consents, the risk that enrolled participants will drop out before completion, competing clinical trials, and clinicians’ patients’ perceptions as to the potential advantages of the product candidate being studied in relation to other available therapies, including any new drugs or therapeutic biologics that may be approved for the indications being investigated by us, and other factors, such as the COVID-19 pandemic, over which we have no control. Furthermore, we are relying and expect to continue to rely on our collaborators, CROs, and clinical trial sites to ensure the proper and timely conduct of our current and future clinical trials, including the patient enrollment process, and we have limited influence over their performance. Additionally, we could encounter delays if treating physicians encounter unresolved ethical issues associated with enrolling patients in our current and future clinical trials of our product candidates in lieu of prescribing existing treatments that have established safety and efficacy profiles.

We could also encounter delays if a clinical trial is suspended or terminated by us, the IRBs of the institutions in which such trials are being conducted, or the FDA or other regulatory authorities, or if a clinical trial is recommended for suspension or termination by the Data Safety Monitoring Board for such trial. A suspension or termination may be imposed due to a number of factors, including failure to conduct the clinical trial in accordance with regulatory requirements or our clinical protocols, inspection of the clinical trial operations or trial site by the FDA or other regulatory authorities resulting in the imposition of a clinical hold, unforeseen safety issues or adverse side effects, failure to demonstrate a benefit from using a product or treatment, failure to establish or achieve clinically meaningful trial endpoints, changes in governmental regulations or administrative actions, or lack of adequate funding to continue the clinical trial. Clinical studies may also be delayed or terminated as a result of ambiguous or negative interim results. Many of the factors that cause, or lead to, a delay in the commencement or completion of clinical trials may also ultimately lead to the denial of regulatory approval of our product candidates. Further, the FDA or other regulatory authorities may disagree with our clinical trial design and our interpretation of data from clinical trials, or may change the requirements for approval even after they have reviewed and commented on the design for our clinical trials.

Table of Contents

Our product development costs will increase if we experience delays in clinical testing or marketing approvals. We do not know whether any of our clinical trials will begin as planned, will need to be restructured or will be completed on schedule, or at all. Significant clinical trial delays also could shorten any periods during which we may have the exclusive right to commercialize our product candidates and may allow our competitors to bring products to market before we do, potentially impairing our ability to successfully commercialize our product candidates and harming our business and results of operations. Any delays in our clinical development programs may harm our business, financial condition, and results of operations significantly.

As an organization, we have limited experience designing and implementing clinical trials. Failure to adequately design a trial, or incorrect assumptions about the design of the trial, could adversely affect the ability to initiate the trial, enroll patients, complete the trial, or obtain regulatory approval on the basis of the trial results, as well as lead to increased or unexpected costs.

The design and implementation of clinical trials is a complex process. While the employees who will implement our clinical trials have experience in the field, we, as an organization, have only recently initiated our first clinical trial. We have limited experience designing and no experience implementing clinical trials, and we may not successfully or cost-effectively design and implement clinical trials that achieve our desired clinical endpoints efficiently, or at all. A clinical trial that is not well designed may delay or even prevent initiation of the trial, can lead to increased difficulty in enrolling patients, may make it more difficult to obtain regulatory approval for the product candidate on the basis of the study results, or, even if a product candidate is approved, could make it more difficult to commercialize the product successfully or obtain reimbursement from third-party payors. Additionally, a trial that is not well-designed could be inefficient or more expensive than it otherwise would have been, or we may incorrectly estimate the costs to implement the clinical trial, which could lead to a shortfall in funding.

Table of Contents

Interim, topline, or preliminary data from our clinical trials that we announce or publish from time to time may change as more patient data becomes available and are subject to audit and verification procedures that could result in material changes in the final data.

From time to time, we may publicly disclose interim, topline, or preliminary data from our preclinical studies and clinical trials, which is based on a preliminary analysis of then-available data, and the results and related findings and conclusions are subject to change following a more comprehensive review of the data related to the particular study or trial. We also make assumptions, estimations, calculations, and conclusions as part of our analyses of data, and we may not have received or had the opportunity to fully and carefully evaluate all data. Further, modifications or improvements to our manufacturing processes for a therapy may result in changes to the characteristics or behavior of the product candidate that could cause our product candidates to perform differently and affect the results of our ongoing clinical trials. As a result, the topline results that we report may differ from future results of the same studies, or different conclusions or considerations may qualify such results, once additional data has been received and fully evaluated. Topline data also remains subject to audit and verification procedures that may result in the final data being materially different from the preliminary data we previously published. As a result, topline data should be viewed with caution until the final data is available.

Preliminary or interim data from clinical trials is subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. Adverse differences between preliminary or interim data and final data could significantly harm our business prospects. Additionally, disclosure of preliminary or interim data by us or by our competitors could result in volatility in the price of our common stock.

Further, others, including regulatory agencies, may not accept or agree with our assumptions, estimates, calculations, conclusions, or analyses or may interpret or weigh the importance of data differently, which could impact the value of the particular program, the approvability or commercialization of the particular product candidate, and our company in general. If the interim, topline, or preliminary data that we report differs from actual results, or if others, including regulatory authorities, disagree with the conclusions reached, our ability to obtain approval for, and commercialize, any of our potential product candidates may be harmed, which could harm our business, operating results, prospects, or financial condition.

Beyond CNTY-101, we may not be able to file our INDs to commence clinical trials on the timelines we expect, and even if we are able to, the FDA may not permit us to proceed.

We expect our pipeline to yield multiple additional INDs, including INDs for CNTY-102, CNTY-104, CNTY-106 and CNTY-107 product candidates from our iPSC-derived allogeneic cell therapy platforms. We cannot be sure that submission of an IND will result in the FDA allowing testing and clinical trials to begin, or that, once begun, issues will not arise that result in suspension or termination of such clinical trials. The manufacturing of our product candidates remains an emerging and evolving field. Accordingly, we expect chemistry, manufacturing and control related topics, including product specifications, will be a focus of IND reviews, and unfavorable findings may delay or prevent the FDA from allowing us to proceed with clinical trials. Additionally, even if such regulatory authorities agree with the design and implementation of the clinical trials set forth in an IND or clinical trial application, or CTA, we cannot guarantee that such regulatory authorities will not change their requirements in the future.

We are pursuing multiple programs and product candidates in our novel cell therapy development pipeline using an approach that is designed to enable rapid incorporation of new product features. If we elect to incorporate these new features into next-generation product candidates, this may render our existing product candidates obsolete, and we may devote our limited resources in pursuit of a particular program for which there is a greater potential for success and fail to capitalize on development opportunities or product candidates including those which may be more advanced in development.

Table of Contents

We focus on the development of programmed cellular immunotherapies for patients with cancer, including off-the-shelf NK- and T-cell product candidates derived from clonal master engineered iPSC lines. Because our iPSC-derived allogeneic cell therapy platforms are designed to enable rapid incorporation of novel functional product features in an evolving clinical setting, we may elect to incorporate these discoveries into next-generation product candidates that render our existing product candidates, including product candidates under clinical development, obsolete. Additionally, because we have limited financial and personnel resources, we may elect or be required to abandon or delay the pursuit of opportunities with existing or future product candidates, including those that may be more advanced in development than those we ultimately elect to pursue. Due to these factors, our spending on current and future research and development programs and product candidates and the scientific innovation arising from these expenditures may not yield commercially viable product candidates.

We intend to study our product candidates in patient populations with significant comorbidities that may result in deaths or serious adverse events or unacceptable side effects and require us to abandon or limit our clinical development activities.

Patients we intend to treat with our product candidates may also receive chemotherapy, radiation, and/or other cell therapy treatments in the course of treatment of their disease, and may therefore experience side effects or adverse events, including death, that are unrelated to our product candidates. While these side effects or adverse events may be unrelated to our product candidates, they may still affect the success of our clinical studies. The inclusion of critically ill patients in our clinical studies may result in deaths or other adverse medical events due to underlying disease or to other therapies or medications that such patients may receive. Any of these events could prevent us from advancing our product candidates through clinical development, and from obtaining regulatory approval, and would impair our ability to commercialize our product candidates, if approved. Any inability to advance our existing product candidates or any other product candidate through clinical development would have a material adverse effect on our business.

We may experience difficulties identifying and enrolling patients in our clinical trials. Difficulty in enrolling patients could delay or prevent clinical trials of CNTY-101 or our other product candidates.

Identifying and qualifying patients to participate in clinical trials of CNTY-101 is critical to our success. The timing of our clinical trials depends in part on the speed at which we can recruit patients to participate in testing CNTY-101, and we may experience delays in our clinical trials if we encounter difficulties in enrollment. The eligibility criteria of our clinical trials may limit the pool of available study participants as it will require patients to have specific characteristics that we can measure to ensure their disease is either severe enough or not too advanced to include them in a clinical trial. The process of finding and diagnosing patients may prove costly. We also may not be able to identify, recruit, and enroll a sufficient number of appropriate patients to complete our clinical trials because of demographic criteria for prospective patients, the perceived risks and benefits of the product candidate under study, the proximity and availability of clinical trial sites for prospective patients, and the patient referral practices of physicians. The availability and efficacy of competing therapies and clinical trials can also adversely impact enrollment. If patients are unwilling to participate in our trials for any reason, the timeline for recruiting patients, conducting trials, and obtaining regulatory approval of potential products may be delayed, the commercial prospects of CNTY-101 or our other product candidates will be harmed, and our ability to generate product revenue from any of these product candidates could be delayed or prevented. Furthermore, our inability to enroll a sufficient number of patients for our clinical trials could result in significant delays or may require us to abandon one or more clinical trials altogether. Enrollment delays in our clinical trials may result in increased development costs and jeopardize our ability to achieve our clinical development timeline and goals, including the dates by which we will commence, complete, and receive results from clinical trials. Enrollment delays in our clinical trials may also jeopardize our ability to commence sales of and generate revenues from CNTY-101 or our other product candidates. Any of these occurrences may harm our business, financial condition, and prospects significantly.

Table of Contents

CNTY-101 and our other product candidates may cause adverse events or undesirable side effects that could delay or prevent its regulatory approval, limit the commercial profile of an approved label, or result in significant negative consequences following marketing approval, if any.

Cell therapy is still a relatively new approach to disease treatment and adverse side effects could develop. There also is the potential risk of delayed adverse events following exposure to cell therapy products due to persistent biologic activity of the genetic material or other components of products used to carry the genetic material.

We have been collecting data about CNTY-101 in preclinical studies and will continue to do so in clinical trials including Elipse-1. We began dosing patients in February 2023 in our Elipse-1 clinical trial. Prior to the first-in-human study, we have only evaluated CNTY-101 in preclinical mouse models and we therefore do not know the side effect profile of our products in humans. Accordingly, we may experience unexpected side effects and/or higher levels of known side effects in clinical trials, including adverse events known in cell therapies. These include the potential for, among others, cytokine release syndrome, or CRS, and neurotoxicity, or immune effector cell-associated neurotoxicity syndrome. B-cell directed therapies may also demonstrate infusion reactions/hypersensitivity, serious infections, prolonged cytopenias, hypogammaglobulinemia/B-cell aplasia, and secondary malignancies.

Any adverse events or undesirable side effects caused by, or other unexpected properties of, CNTY-101 or our other product candidates could cause us, any future collaborators, an IRB, or ethics committee or regulatory authorities to interrupt, delay, or halt clinical trials of our product candidates and could result in a more restrictive label or the delay or denial of regulatory approval by the FDA or other regulatory authorities. It is possible that as we progress CNTY-101 or our other product candidates through preclinical and clinical development, or as the use of CNTY-101 or our other product candidates become more widespread if it receives regulatory approval, illnesses, injuries, discomforts, and other adverse events that were not observed in preclinical studies or clinical trials, as well as conditions that did not occur or went undetected, will be reported by patients. If such side effects become known later in development or after approval, such findings may harm our business, financial condition, and prospects significantly. Further, if a serious safety issue is identified in connection with the use of CNTY-101 or our other product candidates commercially or in third-party clinical trials elsewhere, such issues may adversely affect the development potential of CNTY-101 or our other product candidates or result in regulatory authorities restricting our ability to develop or commercialize CNTY-101 or our other product candidates.

Further, if CNTY-101 or any of our other product candidates were to receive regulatory approval and we or others identify undesirable side effects caused by the product (or any other product) after the approval, a number of potentially significant negative consequences could result, including:

●regulatory authorities may request that we recall or withdraw the product from the market or may limit the approval of the product through labeling or other means;

●regulatory authorities may require the addition of labeling statements, such as a “black box” warning or a contraindication or a precaution;

●we may be required to change the way the product is distributed or administered, conduct additional clinical trials, or change the labeling of the product;

●we may decide to recall or remove the product from the marketplace;

●we could be sued and/or held liable for injury caused to individuals exposed to or taking our product candidates;

●damage to the public perception of the safety of CNTY-101 or our other product candidates; and

Table of Contents

●our reputation may suffer.

Any of these events could prevent us from achieving or maintaining market acceptance of the affected product candidate and could substantially increase the costs of commercializing our product candidates and significantly impact our ability to successfully commercialize our product candidates, if approved, and generate revenues, all of which would materially adversely affect our business, financial condition, and results of operations.

Public opinion and scrutiny of cell-based immuno-oncology therapies for treating cancer, or negative clinical trial results from our cell-based therapy competitors, may impact public perception of our company and product candidates, or impair our ability to conduct our business.

Our iPSC-derived allogeneic cell therapy platforms utilize a relatively novel technology involving the genetic modification of iPSC’s and utilization of those modified cells in other individuals, and no iNK cell-based immunotherapy has been approved to date. Public perception may be influenced by claims, such as claims that cell-based immunotherapy is unsafe, unethical, or immoral and, consequently, our approach may not gain the acceptance of the public or the medical community. Negative public reaction to cell-based immunotherapy in general, or negative clinical trial results from our cell-based therapy competitors, could result in greater government regulation and stricter labeling requirements of cell-based immunotherapy products, including any of our product candidates, and could cause a decrease in the demand for any products we may develop. Adverse public attitudes may adversely impact our ability to enroll clinical trials. More restrictive government regulations or negative public opinion could have an adverse effect on our business or financial condition and may delay or impair the development and commercialization of our product candidates or demand for any products we may develop.

Our research and development activities could be affected or delayed as a result of possible restrictions on animal testing.

Certain laws and regulations require us to test our product candidates on animals before initiating clinical trials involving humans. Animal testing activities have been the subject of controversy and adverse publicity. Animal rights groups and other organizations and individuals have attempted to stop animal testing activities by lobbying for legislation and regulation in these areas and by disrupting these activities through protests and other means. To the extent the activities of these groups are successful, our research and development activities may be interrupted, delayed, or become more expensive.

If we do not achieve our projected development goals in the time frames we announce and expect, the commercialization of our product candidates, if approved, may be delayed.

From time to time, we estimate the timing of the accomplishment of various scientific, clinical, regulatory, manufacturing and other product development goals, which we sometimes refer to as milestones. These milestones may include the commencement or completion of preclinical studies and clinical trials and the submission of regulatory filings, including IND and BLA submissions. From time to time, we may publicly announce the expected timing of some of these milestones. All of these milestones are, and will be, based on a variety of assumptions. The actual timing of these milestones can vary significantly compared to our estimates, in some cases for reasons beyond our control. We may experience numerous unforeseen events during, or as a result of, any clinical trials that we conduct that could delay or prevent our ability to receive marketing approval or commercialize our product candidates.

Table of Contents

Changes in regulatory requirements, guidance from the FDA and other regulatory authorities, or unanticipated events during our clinical trials of CNTY-101 or our other product candidates may result in changes to preclinical studies or clinical trials or additional preclinical or clinical trial requirements, which could result in increased costs to us and could delay our development timeline.

Regulatory requirements governing biologic drug products, including cell therapy products, are still evolving and it is difficult to determine how long it will take or how much it will cost to obtain regulatory approvals for CNTY-101 or our other product candidates. Changes in regulatory requirements, FDA guidance or guidance from other regulatory agencies, or unanticipated events during our preclinical studies or clinical trials may force us to terminate or adjust our development program.

In addition, the clinical trial requirements of the FDA and foreign regulatory authorities and the criteria these regulators use to determine the safety and efficacy of a product candidate vary substantially according to the type, complexity, novelty, intended use, and market of such product candidates. The regulatory approval process for novel product candidates such as ours can be more expensive and take longer than for other, better known or more extensively studied product candidates. The FDA, or the applicable regulatory authorities, may impose additional preclinical or clinical trial requirements. Amendments to clinical trial protocols would require resubmission to the FDA, or the applicable regulatory authorities as well as IRBs and ethics committees for review and approval, which may adversely impact the cost, timing, or successful completion of a clinical trial. If we experience delays completing, or if we terminate, any of our clinical trials, or if we are required to conduct additional preclinical or clinical trials, the commercial prospects for CNTY-101 or our other product candidates may be harmed and our ability to generate product revenue will be delayed, and it would materially adversely affect our business, financial condition, and results of operations.

In order to market any product outside of the United States, we must comply with numerous and varying regulatory requirements of other countries regarding biologic development and commercialization. The approval process varies from country to country and can involve additional product testing and additional administrative review periods. The time required to obtain approval in other countries might differ from and be longer than that required to obtain FDA approval. Regulatory approval in one country does not ensure regulatory approval in another, but a failure or delay in obtaining regulatory approval in one country may negatively impact the regulatory process in others.

Disruptions at the FDA and other government agencies caused by funding shortages or global health concerns could hinder their ability to hire, retain, or deploy key leadership and other personnel, or otherwise prevent new or modified products from being advanced, developed, cleared or approved, or commercialized in a timely manner or at all, which could negatively impact our business.

The ability of the FDA to review and approve new products or regulatory submissions can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory, and policy changes, the FDA’s ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect the FDA’s ability to perform routine functions. Average review times at the agency have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA and other agencies may also slow the time necessary for new biologics or modifications to cleared or approved biologics to be reviewed and/or approved by necessary government agencies, which would adversely affect our business. For example, over the last several years, including for 35 days beginning on December 22, 2018, the United States government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities.

Table of Contents

Separately, in response to the COVID-19 pandemic, the FDA postponed most inspections at domestic and foreign manufacturing facilities from March 2020 until July 2021. Even though the FDA has since resumed standard inspection operations of domestic facilities where feasible, the FDA has continued to monitor and implement changes to its inspectional activities to ensure the safety of its employees and those of the firms it regulates, and any resurgence of the virus may lead to further inspectional delays. Regulatory authorities outside the United States have adopted similar restrictions or other policy measures in response to the COVID-19 pandemic. If a prolonged government shutdown occurs, or if global health concerns prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

We rely, and expect to continue to rely, on third parties to conduct, supervise, and monitor our preclinical studies and clinical trials for our product candidates.

We rely on third-party CROs, study sites, and others to conduct, supervise, and monitor our preclinical studies and clinical trials for our product candidates. We expect to continue to rely on third parties, such as CROs, clinical data management organizations, medical institutions, and clinical investigators, to conduct our preclinical studies and clinical trials of our product candidates. Although we have agreements with these third parties governing their activities, we have limited influence over their actual performance and control only certain aspects of their activities. The failure of these third parties to successfully carry out their contractual duties or meet expected deadlines, could substantially harm our business because we may be delayed in completing or unable to complete the preclinical studies and clinical trials required to support future approval of CNTY-101 and our other product candidates, or we may not obtain marketing approval for, or commercialize, CNTY-101 and our other product candidates in a timely manner or at all. Moreover, these agreements might terminate for a variety of reasons, including a failure to perform by the third parties. If we need to enter into alternative arrangements, our product development activities would be delayed and our business, financial condition, results of operations, and prospects may be materially harmed.

Our reliance on these third parties for development activities reduces our control over these activities. Nevertheless, we are responsible for ensuring that each of our studies is conducted in accordance with the applicable protocol, legal, regulatory, and scientific standards and our reliance on third parties does not relieve us of our regulatory responsibilities. For example, we will remain responsible for ensuring that each of our preclinical studies and clinical trials is conducted in accordance with the general investigational plan and protocols for such trial. We must also ensure that our preclinical studies and clinical trials are conducted in accordance with cGLP regulations, as appropriate. Moreover, the FDA and comparable foreign regulatory authorities require us to comply with cGCPs for conducting, recording, and reporting the results of clinical trials to ensure that data and reported results are credible and accurate and that the rights, integrity, and confidentiality of trial participants are protected. Regulatory authorities enforce these requirements through periodic inspections of trial sponsors, clinical investigators, and trial sites. If we or any of our third parties fail to comply with applicable cGCPs or other regulatory requirements, we or they may be subject to enforcement or other legal actions, the data generated in our preclinical studies and clinical trials may be deemed unreliable and the FDA, or comparable foreign regulatory authorities may require us to perform additional studies.

In addition, we will be required to report certain financial interests of our third-party investigators if these relationships exceed certain financial thresholds or meet other criteria. The FDA or comparable foreign regulatory authorities may question the integrity of the data from those clinical trials conducted by investigators who may have conflicts of interest.

We cannot assure you that upon inspection by a given regulatory authority, such regulatory authority will determine that any of our clinical trials will comply with the applicable regulatory requirements. In addition, our clinical trials must be conducted with product candidates that were produced under cGMP regulations.

100

Table of Contents

Failure to comply with these regulations may require us to repeat clinical trials, which would delay the regulatory approval process. We also are required to register certain clinical trials and post the results of certain completed clinical trials on a government-sponsored database, www.clinicaltrials.gov, within specified timeframes. Failure to do so can result in enforcement actions and adverse publicity.

The third parties with which we work may also have relationships with other entities, some of which may be our competitors, for whom they may also be conducting trials or other therapeutic development activities that could harm our competitive position. In addition, such third parties are not our employees, and except for remedies available to us under our agreements with such third parties we cannot control whether or not they devote sufficient time and resources to our ongoing developmental and preclinical programs. If these third parties do not successfully carry out their contractual duties, meet expected deadlines, or conduct our preclinical studies or clinical trials in accordance with regulatory requirements or our stated protocols, if these parties are adversely impacted by macroeconomic or other factors limiting or materially affecting their ability to carry out their contractual duties, if they need to be replaced or if the quality or accuracy of the data they obtain is compromised due to the failure to adhere to our protocols, regulatory requirements or for other reasons, our preclinical studies and clinical trials may be repeated, extended, delayed, or terminated; we may not be able to obtain, or may be delayed in obtaining, marketing approvals for CNTY-101 and our other product candidates; we may not be able to, or may be delayed in our efforts to, successfully commercialize CNTY-101 or our other product candidates; or we or they may be subject to regulatory enforcement actions. As a result, our results of operations and the commercial prospects for CNTY-101 and our other candidates would be harmed, our costs could increase and our ability to generate revenues could be delayed. To the extent we are unable to successfully identify and manage the performance of third-party service providers in the future, our business, financial condition, results of operations, and prospects may be materially harmed.

If any of our relationships with these third parties terminate, we may not be able to enter into arrangements with alternative providers or to do so on commercially reasonable terms. Switching or adding additional third parties involves additional cost and requires management’s time and focus. In addition, there is a natural transition period when a new third party commences work. As a result, delays could occur, which could compromise our ability to meet our desired development timelines.

We may expend our limited resources to pursue a particular product candidate or indication and fail to capitalize on product candidates or indications that may be more profitable or for which there is a greater likelihood of success.

Because we have limited financial and managerial resources, we focus on research programs, therapeutic platforms, and product candidates that we identify for specific indications. As a result, we may forego or delay our pursuit of opportunities with other therapeutic platforms or product candidates or for other indications that later prove to have greater commercial potential. Our resource allocation decisions may cause us to fail to capitalize on viable commercial products or profitable market opportunities. Our spending on current and future research and development programs, therapeutic platforms, and product candidates for specific indications may not yield any commercially viable products. If we do not accurately evaluate the commercial potential or target market for a particular product candidate, we may relinquish valuable rights, including intellectual property rights, to that product candidate through collaboration, licensing, or other royalty arrangements in cases in which it would have been more advantageous for us to retain sole development and commercialization rights.

We are party to a Collaboration Agreement with Bristol-Myers Squibb, and pursuant to the terms of that agreement, could become dependent on Bristol-Myers Squibb for development and commercialization activities with respect to certain of our product candidates.

We are party to a Research, Collaboration and License Agreement with Bristol-Myers Squibb, or the Collaboration Agreement, pursuant to which we agreed to collaborate on the research, development and commercialization of iNK and iT cell programs for hematologic malignancies and solid tumors. Pursuant to the Collaboration Agreement, Bristol-Myers Squibb will initially collaborate with us on two collaboration programs

101

Table of Contents

and has the option to add up to two additional collaboration programs, for an additional fee. We are responsible for generating development candidates for the collaboration programs with Bristol-Myers Squibb. Once a development candidate meets certain criteria, Bristol-Myers Squibb has the option to exclusively license the development candidates for pre-clinical development, clinical development and commercialization on a worldwide basis. Upon the exercise by Bristol-Myers Squibb of its option for a development candidate, Bristol-Myers Squibb will be responsible for all regulatory, clinical, manufacturing (after a proof of concept clinical trial) and commercialization activities with respect to that development candidate, subject to the terms of the Collaboration Agreement. Bristol-Myers Squibb may elect not to exercise its option and we may not obtain all the intellectual property rights required to develop the product candidates on our own. We cannot control whether Bristol-Myers Squibb will devote sufficient attention or resources to this collaboration or will proceed in an expeditious manner. Even if the FDA or other regulatory agencies approve any of the licensed product candidates, Bristol-Myers Squibb may elect not to proceed with the commercialization of the resulting product in one or more countries.

Under the Collaboration Agreement, Bristol-Myers Squibb paid us an upfront payment of $100 million. In addition to the upfront payment, we may receive development and regulatory milestone payments of up to an additional $235 million. We will also be eligible to receive up to an additional $500 million in payments upon the achievement of certain sales milestones. We will also be entitled to receive, subject to certain reductions, tiered royalties ranging from high-single digits up to low-teens as percentages net sales, if any, on any licensed product generated pursuant to the Collaboration Agreement. The milestones that trigger a payment or royalties under the Collaboration Agreement may never be reached and failure to do so could harm our business and financial condition.

Bristol-Myers Squibb has customary rights to terminate the Collaboration Agreement and if Bristol-Myers Squibb terminates the Collaboration Agreement, it will result in a delay in or could prevent us from developing or commercializing the product candidates subject to the Collaboration Agreement. Further, disputes may arise between us and Bristol-Myers Squibb, which may delay or cause the termination of this collaboration, result in significant litigation, cause Bristol-Myers Squibb to act in a manner that is not in our best interest or cause us to seek another collaborator or proceed with development, commercialization and funding on our own. If we seek a new collaborator but are unable to do so on acceptable terms, or at all, or do not have sufficient funds to conduct the development or commercialization of such development candidates we may have to curtail or abandon that development or commercialization, which could harm our business.

We may explore strategic collaborations that may never materialize or we may be required to relinquish important rights to and control over the development and commercialization of our product candidates to any future collaborators.

Our business strategy includes leveraging our strategic partnership with Bristol-Myers Squibb and FUJIFILM Cellular Dynamics Inc., or FCDI, and may include additional future partnerships for product development, product commercialization, manufacturing or other strategic objectives. As a result, we may in the future determine to collaborate with additional companies for development and potential commercialization of one or more therapeutic products. At the current time however, we cannot predict what form such a strategic collaboration might take. We are likely to face significant competition in seeking appropriate strategic collaborators, and strategic collaborations can be complicated and time-consuming to negotiate and document.

We may not be able to negotiate strategic collaborations on acceptable terms, if at all. Our ability to reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed collaborator’s evaluation of a number of factors. If we are unable to reach agreements with suitable collaborators on a timely basis, on acceptable terms, or at all, we may have to curtail the development of a product candidate, reduce or delay one or more of our other development programs, delay our potential commercialization or reduce the scope of any sales or marketing activities, or increase our expenditures and undertake development or commercialization activities at our own expense. If we elect to fund and undertake

102

Table of Contents

development or commercialization activities on our own, we may need to obtain additional expertise and additional capital, which may not be available to us on acceptable terms or at all. If we fail to enter into collaborations and do not have sufficient funds or expertise to undertake the necessary development and commercialization activities, we may not be able to further develop our product candidates or bring them to market or continue to develop our technology platforms and our business may be materially and adversely affected.

If and when we collaborate with a third party for development and commercialization of a product candidate, we can expect to relinquish some or all of the control over the future success of that product candidate to the third party. We are unable to predict when, if ever, we will enter into any strategic partnerships because of the numerous risks and uncertainties associated with establishing them, including:

●expenditure of substantial operational, financial and management resources;

●dilutive issuances of our securities;

●substantial actual or contingent liabilities; and

●termination or expiration of the arrangement, which would delay the development and may increase the cost of developing our product candidates.

Strategic partners may also delay clinical trials, experience financial difficulties, provide insufficient funding, terminate a clinical trial, or abandon a product candidate, which could negatively impact our development efforts. Additionally, strategic partners may not properly maintain, enforce, or defend our intellectual property rights or may use our proprietary information in a manner that could jeopardize or invalidate our proprietary information or expose us to potential litigation, any of which could adversely affect our business, financial position, and operations.

If our collaborations do not result in the successful development and commercialization of products or if one of our collaborators terminates its agreement with us, we may not receive any future research funding or milestone or royalty payments under the collaboration. All of the risks relating to product development, regulatory approval, and commercialization described in this Annual Report on Form 10-K also apply to the activities of our program collaborators. Additionally, subject to its contractual obligations to us, if one of our collaborators is involved in a business combination, the collaborator may deemphasize or terminate the development or commercialization of any product candidate licensed to it by us. If our collaborator terminates its agreement with us, it may find it more difficult to attract new collaborators.

Risks related to manufacturing

The manufacture and distribution of our iPSC-derived cell product candidates is complex and subject to a multitude of risks. These risks could substantially increase our costs and limit the clinical and commercial supply of our product candidates.

The manufacture and supply of our product candidates involve novel processes that are more complex than those required for most drugs, biologics and other cellular immunotherapies and, accordingly, present significant challenges and are subject to multiple risks. These complex processes include reprogramming human somatic cells to obtain iPSCs, genetically engineering these iPSCs, and differentiating the iPSCs to obtain the desired product candidate. As a result of the complexities in manufacturing biologics and distributing cell therapies, the cost to manufacture and distribute biologics and cell therapies in general, and our cell product candidates in particular, is generally higher than traditional small molecule chemical compounds. In addition, our cost of goods development is at an early stage. The actual cost to manufacture and process our product candidates could be greater than we expect and could materially and adversely affect the commercial viability of our product candidates.

103

Table of Contents

We have limited experience in the manufacture of cell-based therapies. We are still developing optimized and reproducible manufacturing processes for clinical and commercial-scale manufacturing of our product candidates, and none of our manufacturing processes have been validated for commercial production of our product candidates. In addition, we are still optimizing our protocols for the supply and transport of our product candidates for distribution to clinical trial sites. Although we are working to develop reproducible and commercially viable manufacturing processes for our product candidates, and effective protocols for the supply and transport of our product candidates, doing so is a difficult and uncertain task.

We may make changes as we continue to develop and refine the manufacturing and distribution processes for our product candidates for clinical trials and commercialization, and we cannot be sure that even minor changes in these processes will not cause our product candidates to perform differently and affect the results of our ongoing and planned clinical trials or the performance of the product once commercialized. In some circumstances, changes in our manufacturing operations, including to our protocols, processes, materials, or facilities used, may require us to perform additional preclinical or comparability studies, or to collect additional clinical data from patients prior to undertaking additional clinical studies or filing for regulatory approval for a product candidate. These requirements may lead to delays in our clinical development and commercialization plans for our product candidates, and may increase our development costs substantially.

Cell-based therapies depend on the availability of reagents and specialized materials and equipment which in each case are required to be acceptable to the FDA and foreign regulatory agencies, and such reagents, materials, and equipment may not be available to us on acceptable terms or at all. We rely on third-party suppliers for various components, materials, and equipment required for the manufacture of our product candidates and do not have supply arrangements for certain of these components.

Manufacturing our product candidates requires many reagents and other specialty materials and equipment, some of which are manufactured or supplied by small companies with limited resources and experience to support commercial biologics production. To date, we and our clinical cell processing facilities and CMOs have purchased equipment, materials, and disposables, such as automated cell washing devices, automated cell warming units, commercially available media, and cell transfer and wash sets, used for the manufacture of our existing product candidates from third-party suppliers. Some of these suppliers may not have the capacity to support commercial products manufactured under cGMP by biopharmaceutical firms or may otherwise be ill-equipped to support our needs. Reagents and other key materials from these suppliers may have inconsistent attributes and introduce variability into our manufactured product candidates, which may contribute to variable patient outcomes and possible adverse events. We rely on the general commercial availability of materials required for the manufacture of our product candidates, and do not have supply contracts with many of these suppliers and may not be able to obtain supply contracts with them on acceptable terms or at all. Even if we are able to enter into such contracts, we may be limited to a sole third party for the supply of certain required components, including our pharmacologic modulators and components for our cell processing media. As a result of the lingering effects of the recent COVID-19 pandemic and other factors, the business and operations of our suppliers may be disrupted or delayed, and we in turn may experience disruptions or delays in our supply chain. An inability to continue to source product from any of these suppliers, which could be due to the impacts of global pandemics, macroeconomic factors, recent regulatory actions, or requirements affecting the supplier, adverse financial or other strategic developments experienced by a supplier, labor disputes or shortages, unexpected demands, or quality issues, could adversely affect our ability to satisfy demand for our product candidates, which could adversely and materially affect our product sales and operating results or our ability to conduct clinical trials, either of which could significantly harm our business.

104

Table of Contents

If we are required to change suppliers, or modify the components, equipment, materials, or disposables used for the manufacture of our product candidates, we may be required to change our manufacturing operations or clinical trial protocols or to provide additional data to regulatory authorities in order to use any alternative components, equipment, materials, or disposables, any of which could set back, delay, or increase the costs required to complete our clinical development and commercialization of our product candidates. Additionally, any such change or modification may adversely affect the safety, efficacy, stability, or potency of our product candidates, and could adversely affect our clinical development of our product candidates and harm our business.

We rely on third parties for the manufacture of some of our product candidates for development, and we are beginning to operate our own manufacturing facility for the production of certain of our product candidates.

We are now operating our own manufacturing facilities and but still rely on FCDI for the manufacture of some of our product candidates and CMOs for the manufacture of related raw materials for clinical and preclinical development. It is uncertain whether we will be able to utilize our own manufacturing facilities for commercial manufacturing of our products and therefore, we may need to rely on third parties for commercial manufacturing if any of our product candidates receive marketing approval. We have partnered with FCDI for the manufacture and supply of some of our product candidates for future clinical development, as well as to establish commercial supplies of our product candidates, if approved. If either of our Manufacturing Agreement or Master Collaboration Agreement with FCDI terminates, and if we need to enter into alternative arrangements, our product development activities could be delayed and our business, financial condition, results of operations, and prospects may be materially harmed. We completed construction of our own 53,000 square foot cGMP manufacturing facility in Branchburg, New Jersey as well as the fit-out and qualifications for the facility in 2022 and the facility is operational. However, we are only beginning to gain operational experience in the facility and there can be no assurance that we will be able to reliably manufacture our product candidates in this facility in a timely manner, or at all.

The facilities used by us, FCDI, and any other manufacturers with which we may collaborate must be approved by the FDA pursuant to inspections that will be conducted after we submit a BLA to the FDA. For manufacturing facilities in which we do not operate, we do not control the manufacturing process of, and are completely dependent on, CMOs for compliance with cGMP requirements for the manufacture of biologic products. If these CMOs cannot successfully manufacture material that conforms to our specifications and the strict regulatory requirements of the FDA or others, they will not be able to secure and/or maintain regulatory approval for their manufacturing facilities. In addition, we have no control over the ability of CMOs to maintain adequate quality control, quality assurance, and qualified personnel. If the FDA or a comparable foreign regulatory authority does not approve these facilities for the manufacture of our product candidates or if it withdraws any such approval in the future, we may need to find alternative manufacturing facilities, which would significantly impact our ability to develop, obtain regulatory approval for or market our product candidates, if approved. Our failure, or the failure of our CMO, to comply with applicable regulations could result in sanctions being imposed on us, including clinical holds, fines, injunctions, civil penalties, delays, suspension or withdrawal of approvals, seizures or recalls of product candidates or products, operating restrictions, and criminal prosecutions, any of which could significantly and adversely affect supplies of our product candidates.

Our or a CMO’s failure to execute on our manufacturing requirements, to do so on commercially reasonable terms and comply with cGMP could adversely affect our business in a number of ways, including:

●an inability to initiate or continue clinical trials of CNTY-101 or our other product candidates under development;

●delay in submitting regulatory applications, or receiving marketing approvals, for our product candidates;

105

Table of Contents

●subjecting third-party manufacturing facilities or our manufacturing facilities to additional inspections by regulatory authorities;

●requirements to cease development or to recall batches of our product candidates; and

●in the event of approval to market and commercialize CNTY-101 or our other product candidates, an inability to meet commercial demands for CNTY-101 or our other product candidates.

Any performance failure on the part of us or our existing or future CMOs could delay clinical development or marketing approval, and any related remedial measures may be costly or time-consuming to implement. If our current CMOs cannot perform as agreed or if our own cGMP manufacturing facility in Branchburg, New Jersey does not operate as expected, we may be required to replace such manufacturers and we may be unable to replace them on a timely basis or at all.

Our current and anticipated future dependence upon CMOs for the manufacture of our product candidates or products may adversely affect our future profit margins and our ability to commercialize any products that receive marketing approval on a timely and competitive basis.

Delays in commissioning and receiving regulatory approvals for our manufacturing facilities could delay our development plans and thereby limit our ability to generate revenues.

We believe that internal cGMP manufacturing is important to facilitate clinical product supply, lower the risk of manufacturing disruptions, and enable more cost-effective manufacturing. We believe our Branchburg, New Jersey facility will allow us to supply certain of our product candidates needed for our early-stage clinical trials and preclinical studies. The operation and maintenance, and regulatory approvals for such facilities, require substantial capital and technical expertise and any delay could limit our development activities and our opportunities for growth, or negatively impact our financial results.

Furthermore, our manufacturing facility will be subject to ongoing, periodic inspection by the FDA and other comparable regulatory agencies to ensure compliance with cGMP. Our failure to follow and document our adherence to these regulations or other regulatory requirements may lead to significant delays in the availability of products for clinical use or may result in the termination of or a hold on a clinical study. Failure to comply with applicable regulations could also result in sanctions being imposed on us, including fines, injunctions, civil penalties, a requirement to suspend or put on hold one or more of our clinical trials, failure of regulatory authorities to grant marketing approval of our product candidates, delays, suspension or withdrawal of approvals, license revocation, seizures or recalls of product candidates, operating restrictions, and criminal prosecutions, any of which could materially adversely affect our business, financial condition, results of operations, and growth prospects.

We also may encounter problems with the following:

●complying with regulations regarding donor traceability, manufacturing, release of product candidates and other requirements from regulatory authorities outside the United States;

●achieving adequate or clinical-grade materials that meet regulatory agency standards or specifications with consistent and acceptable production yield and costs;

●bacterial, fungal, or viral contamination in our manufacturing facility; and

●shortages of qualified personnel, raw materials, or key contractors.

Our product candidates, if approved by applicable regulatory authorities, may require significant commercial supply to meet market demand. In these cases, we may need to increase, or “scale up,” the production process by a significant factor over the initial level of production. If we fail to develop sufficient manufacturing

106

Table of Contents

capacity and experience, whether internally or with a third party, are delayed in doing so, or fail to manufacture our product candidates economically or on reasonable scale or volumes, or in accordance with cGMP, or if the cost of this scale-up is not economically feasible, our development programs and commercialization of any approved products will be materially adversely affected and we may not be able to produce our product candidates in a sufficient quantity to meet future demand and our business, financial condition, results of operations, and growth prospects may be materially adversely affected.

We cryogenically store our CAR-iNK and CAR-iT cells and master and working cell banks of the engineered iPSC cells at both our own manufacturing facility and at third party facilities

The CAR-iNK and CAR-iT cells and the master and working cell banks of the engineered iPSC cells are stored in freezers at both third-party biorepositories and in our freezers at our manufacturing facility. If these materials are damaged at either or both our or these third party facilities, including by the loss or malfunction of these freezers or our back-up power systems, as well as by damage from fire, power loss or other natural disasters, we may need to establish replacement CAR-iNK and CAR-iT cells and master and working cell banks of the engineered iPSC cells, which would impact clinical supply and delay patient treatment. If we are unable to establish replacement materials, we could incur significant additional expenses and liability to patients whose treatment is delayed, and our business could suffer.

Risks related to commercialization of our product candidates

If we are unable to successfully commercialize CNTY-101 or any of our other product candidates for which we receive regulatory approval, or experience significant delays in doing so, our business will be materially harmed.

If we are successful in obtaining marketing approval from applicable regulatory authorities for CNTY-101 or any of our other product candidates, our ability to generate revenues from such product candidates will depend on our success in:

●launching commercial sales of our product candidates, whether alone or in collaboration with others;

●receiving an approved label with claims that are necessary or desirable for successful marketing, and that does not contain safety or other limitations that would impede our ability to market our product candidates;

●creating market demand for our product candidates through marketing, sales, and promotion activities;

●hiring, training, and deploying a sales force or contracting with third parties to commercialize our product candidates;

●manufacturing, either on our own or through third parties, product candidates in sufficient quantities and at acceptable quality and cost to meet commercial demand at launch and thereafter;

●establishing and maintaining agreements with wholesalers, distributors, and group purchasing organizations on commercially reasonable terms;

●creating partnerships with, or offering licenses to, third parties to promote and sell product candidates in foreign markets where we receive marketing approval;

●obtaining, maintaining, protecting, and enforcing patent and trade secret protection and regulatory exclusivity for our product candidates;

107

Table of Contents

●achieving market acceptance of our product candidates by patients, the medical community, and third-party payors;

●achieving appropriate reimbursement for our product candidates, if approved;

●effectively competing with other therapies; and

●maintaining an acceptable tolerability profile of our product candidates following launch.

To the extent we are not able to do any of the foregoing, our business, financial condition, results of operations, and prospects will be materially harmed.

We face significant competition, and if our competitors develop product candidates more rapidly than we do or their product candidates are more effective, our ability to develop and successfully commercialize products may be adversely affected.

The biopharmaceutical and pharmaceutical industries are characterized by rapid innovation, intense and dynamic competition and a strong emphasis on proprietary and novel products and product candidates. While we believe that our technology, scientific knowledge, and experience in the field of cellular immunotherapy provide us with competitive advantages, we face potential competition from many different sources, including major pharmaceutical, specialty pharmaceutical and biopharmaceutical companies, academic institutions, governmental agencies, and public and private research institutions, as well as standard-of-care treatments, and new products undergoing development and combinations of existing and new therapies. Any product candidates that we successfully develop and commercialize will compete with existing therapies and new therapies, including combinations thereof, that may become available in the future. We compete with these organizations to recruit management, scientists, and clinical development personnel, which could negatively affect our level of expertise and our ability to execute our business plan. We will also face competition in establishing clinical trial sites, enrolling subjects for clinical trials, and in identifying and in-licensing new product candidates. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies.

We are developing off-the-shelf cell therapies by differentiating engineered iPSC into NK-, T-, or other immune cells for the treatment of various cancers. While we believe our genetically-engineered immune effector cell therapies derived from iPSC are highly differentiated, a number of companies are currently focused on the development of cellular immunotherapies for the treatment of cancer. In addition, because reprogramming technology and gene editing technology are available on a non-exclusive basis, the number of companies developing iPSC-derived products and products using gene editing technology is expected to increase, which will increase competitive pressure on us. Moreover, the reprogramming technology licensed to us from FCDI and the gene editing technology licensed to us from Inscripta, Inc. are each licensed to us on a non-exclusive basis, and therefore third parties may obtain licenses to the same technology to compete with us.

108

Table of Contents

Large pharmaceutical companies that have commercialized or are developing immunotherapies to treat cancer include AstraZeneca, Bristol-Myers Squibb, Gilead Sciences, Merck, Novartis, Pfizer, and Roche/Genentech. Companies that compete with us directly on the level of the development of product candidates targeting B-cell lymphomas include Gilead Sciences, Novartis, Roche, Genmab, Abbvie and Bristol-Myers Squibb, among others. On the technology level, other emerging biopharmaceutical companies which can potentially develop competing cell therapy candidates to treat cancer include Fate Therapeutics, Allogene Therapeutics, CRIPSR Therapeutics, Caribou Biosciences, Shoreline Biosciences, Sana Biotechnology and Nkarta Therapeutics.

Many of our competitors have significantly greater financial, technical, manufacturing, marketing, sales, and supply resources or experience than we do. If we successfully obtain approval for any product candidate, we will face competition based on many different factors, including the safety and effectiveness of our products, the ease with which our products can be administered and the extent to which patients accept relatively new routes of administration, the timing and scope of regulatory approvals for these products, the availability and cost of manufacturing, marketing and sales capabilities, price, reimbursement coverage, and patent position. Competing products could present superior treatment alternatives, including by being more effective, safer, more convenient, less expensive, or marketed and sold more effectively than any products we may develop. Our competitors also may obtain FDA or other regulatory approval for their products more rapidly than we may obtain approval for ours, which could result in our competitors establishing a strong market position before we are able to enter the market. Competitive products may make any products we develop obsolete or noncompetitive before we recover the expense of developing and commercializing our product candidates. If we are unable to compete effectively, our opportunity to generate revenue from the sale of our products we may develop, if approved, could be adversely affected.

We expect to face uncertainty regarding the pricing of our existing product candidates and any other product candidates that we may develop, and for which we may receive approval.

Due to the novel nature of our product candidates, we face significant uncertainty as to the pricing of any such products for which we may receive marketing approval. While we anticipate that pricing for any product candidates that we develop will be relatively high due to their anticipated use in the prevention or treatment of life-threatening diseases where therapeutic options are limited, the biopharmaceutical industry has recently experienced significant pricing pressures, including in the area of orphan drug products. In particular, drug pricing and other healthcare costs continue to be subject to intense political and societal pressures, which we anticipate will continue and escalate on a global basis. These pressures may result in harm to our business and reputation, cause our stock price to decline or experience periods of volatility, and adversely affect results of operations and our ability to raise funds.

In addition, we expect to experience pricing pressures in connection with the pricing of any of our product candidates due to the trend toward managed healthcare, the increasing influence of health maintenance organizations, and additional legislative changes. The downward pressure on healthcare costs in general, particularly prescription medicines, medical devices and surgical procedures and other treatments, has become very intense. As a result, increasingly high barriers are being erected to the successful commercialization of new products. Further, the adoption and implementation of any future governmental cost containment or other health reform initiative may result in additional downward pressure on the price that we may receive for any approved product.

The insurance coverage and reimbursement status of newly-approved products is uncertain. Failure to obtain or maintain adequate coverage and reimbursement for new products could limit our product revenues.

Our ability to commercialize any of our product candidates successfully will depend in part on the extent to which reimbursement for these products and related treatments will be available from government health administration authorities, private health insurers, and other organizations. In the United States, the principal decisions about reimbursement for new therapies are typically made by Centers for Medicare and Medicaid

109

Table of Contents

Services, or CMS, an agency within the United States Department of Health and Human Services. CMS decides whether and to what extent a new therapy will be covered and reimbursed under Medicare, and private payors tend to follow CMS determinations to a substantial degree. The availability and extent of reimbursement by governmental and private payors is essential for most patients to be able to afford expensive treatments, such as cellular immunotherapy. There is significant uncertainty related to the insurance coverage and reimbursement of newly approved products by government and third-party payors. In particular, there is no body of established practices and precedents for reimbursement of cellular immunotherapies, and it is difficult to predict what the regulatory authority or private payor will decide with respect to reimbursement levels for novel products such as ours. Our products may not qualify for coverage or direct reimbursement, or may be subject to limited reimbursement. If reimbursement or insurance coverage is not available, or is available only to limited levels, we may not be able to successfully commercialize our product candidates, if approved. Even if coverage is provided, the approved reimbursement amount may not be sufficient to allow us to establish or maintain pricing to generate income.

In addition, reimbursement agencies in foreign jurisdictions may be more conservative than those in the United States. Accordingly, in markets outside the United States, the reimbursement for our product candidates, if approved, may be reduced compared with the United States and may be insufficient to generate commercially reasonable revenues and profits. Moreover, increasing efforts by governmental and third-party payors, in the United States and abroad, to cap or reduce healthcare costs may cause such organizations to limit both coverage and level of reimbursement for new products approved, and as a result, they may not cover or provide adequate payment for our product candidates. Failure to obtain or maintain adequate reimbursement for any products for which we receive marketing approval will adversely affect our ability to achieve commercial success, and could have a material adverse effect on our operating results, our ability to raise capital needed to commercialize products, and our overall financial condition.

Even if we obtain regulatory and marketing approval for a product candidate, our product candidates will remain subject to regulatory oversight.

Even if we receive marketing and regulatory approval for CNTY-101 or any of our other product candidates, regulatory authorities may still impose significant restrictions on the indicated uses or marketing or impose ongoing requirements for potentially costly post-approval studies. CNTY-101 and our other product candidates will also be subject to ongoing regulatory requirements for manufacturing, labeling, packaging, storage, advertising, promotion, sampling, record-keeping, and submission of safety and other post-market information. The FDA has significant post-market authority, including, for example, the authority to require labeling changes based on new safety information and to require post-market studies or clinical trials to evaluate serious safety risks related to the use of a biologic. Any regulatory approvals that we receive for CNTY-101 or our other product candidates may also be subject to a risk evaluation and mitigation strategy, or REMS, limitations on the approved indicated uses for which the product may be marketed or to the conditions of approval, or contain requirements for potentially costly post-marketing testing, including post-approval clinical trials, and surveillance to monitor the quality, safety, and efficacy of the product, all of which could lead to lower sales volume and revenue. For example, the holder of an approved BLA is obligated to monitor and report adverse events and any failure of a product to meet the specifications in the BLA. The holder of an approved BLA also must submit new or supplemental applications and obtain FDA approval for certain changes to the approved product, product labeling, or manufacturing process. Advertising and promotional materials must comply with FDA rules and are subject to FDA review, in addition to other potentially applicable federal and state laws.

In addition, product manufacturers and their facilities are subject to payment of user fees and continual review and periodic inspections by the FDA and other regulatory authorities for compliance with cGMP requirements and adherence to commitments made in the BLA or foreign marketing application. If we, or a regulatory authority, discover(s) previously unknown problems with a product, such as adverse events of unanticipated severity or frequency, or problems with the facility where the product is manufactured or disagrees with the promotion, marketing or labeling of that product, a regulatory authority may impose restrictions relative to that product, the manufacturing facility or us, including requiring recall or withdrawal of the product from the

110

Table of Contents

market or suspension of manufacturing. Additionally, under FDORA, sponsors of approved drugs and biologics must provide 6 months’ notice to the FDA of any changes in marketing status, such as the withdrawal of a drug, and failure to do so could result in the FDA placing the product on a list of discontinued products, which would revoke the product’s ability to be marketed.

If we or our contractors fail to comply with applicable regulatory requirements following approval of CNTY-101 or our other product candidates, a regulatory authority may:

●issue a warning letter, untitled letter, or Form 483, asserting that we are in violation of the law;

●request voluntary product recalls;

●seek an injunction or impose administrative, civil, or criminal penalties or monetary fines;

●suspend or withdraw regulatory approval;

●suspend any ongoing clinical trials;

●refuse to approve a pending BLA or comparable foreign marketing application (or any supplements thereto);

●restrict the marketing or manufacturing of the product;

●seize or detain the product or otherwise require the withdrawal of the product from the market;

●refuse to permit the import or export of product candidates; or

●refuse to allow us to enter into supply contracts, including government contracts.

Any government investigation of alleged violations of law could require us to expend significant time and resources in response and could generate negative publicity. The occurrence of any event or penalty described above may inhibit our ability to commercialize CNTY-101 or our other product candidates and adversely affect our business, financial condition, results of operations, and prospects.

Even if we receive marketing approval for CNTY-101 or our other product candidates, we may not achieve broad market acceptance.

The commercial success of CNTY-101 or our other product candidates, if developed and approved for marketing by the FDA or comparable foreign regulatory authority, will depend upon the awareness and acceptance of CNTY-101 or such other product candidate among the medical community, including physicians, patients, advocacy groups, and healthcare payors. Market acceptance of our product candidates, if approved, will depend on a number of factors, including, among others:

●the prevalence and severity of any adverse side effects associated with our product candidates;

●limitations or warnings contained in the labeling approved for our product candidates by the FDA or comparable foreign regulatory authority, such as a “black box” warning;

●availability of alternative treatments, including any competitive therapies in development that could be approved or commercially launched prior to approval of our product candidates;

111

Table of Contents

●the willingness of the target patient population to try new therapies and of physicians to prescribe these therapies;

●the strength of marketing and distribution support and timing of market introduction of competitive products;

●pricing;

●payor acceptance;

●the impact of any future changes to the United States healthcare system;

●the effectiveness of our sales and marketing strategies; and

●the likelihood that the FDA may require development of a REMS, as a condition of approval or post-approval or may not agree with our proposed REMS or may impose additional requirements that limit the promotion, advertising, distribution, or sales of our product candidates.

If CNTY-101 or any of our other product candidates are approved but do not achieve an adequate level of acceptance by patients, advocacy groups, physicians and payors, we may not generate sufficient revenue to become or remain profitable and our business, financial condition, and results of operations could be materially adversely affected. Our efforts to educate the medical community and third-party payors about the benefits of CNTY-101 and our other product candidates may require significant resources and may never be successful.

Even if we receive marketing approval for CNTY-101 or our other product candidates in the United States, we may never receive regulatory approval to market CNTY-101 or our other product candidates outside of the United States.

In order to market any product outside of the United States, we must establish and comply with the numerous and varying safety, efficacy, and other regulatory requirements of other jurisdictions, including potential additional clinical trials and/or preclinical studies. Approval procedures vary among jurisdictions and can involve additional testing and additional administrative review periods. The time required to obtain approvals in other jurisdictions might differ from that required to obtain FDA approval. The marketing approval processes in other jurisdictions may implicate all of the risks detailed above regarding FDA approval in the United States as well as other risks. In particular, in many jurisdictions outside of the United States, products must receive pricing and reimbursement approval before the product can be commercialized. Obtaining this approval can result in substantial delays in bringing products to market in such jurisdictions. Marketing approval in one jurisdiction does not necessarily ensure marketing approval in another, but a failure or delay in obtaining marketing approval in one country may have a negative effect on the regulatory process or commercial activities in others. Failure to obtain marketing approval in other jurisdictions or any delay or other setback in obtaining such approval would impair our ability to market a product candidate in such foreign markets. Any such impairment would reduce the size of our potential market, which could have a material adverse impact on our business, financial condition, results of operations, and prospects.

We may be unable to establish effective marketing, sales and distribution capabilities or enter into agreements with third parties to market and sell CNTY-101 or our other product candidates, if approved.

We currently do not have a commercial infrastructure for the marketing, sale, and distribution of CNTY-101, or our other product candidates. If CNTY-101 or our other product candidates receive marketing approval, we intend to commercialize such product candidates in the United States and potentially in other geographies. In order to commercialize our products, we must build our marketing, sales, and distribution capabilities or make arrangements with third parties to perform these services. We may not be successful in doing so. Should we

112

Table of Contents

decide to move forward in developing our own marketing capabilities, we may incur expenses prior to product launch or even approval in order to recruit a sales force and develop a marketing and sales infrastructure. If a commercial launch is delayed as a result of the FDA’s or comparable foreign regulatory authority’s requirements or for other reasons, we would incur these expenses prior to being able to realize any revenue from sales of CNTY-101 and our other product candidates. Even if we are able to effectively hire a sales force and develop a marketing and sales infrastructure, our sales force and marketing teams may not be successful in commercializing CNTY-101 or our other product candidates. This may be costly, and our investment would be lost if we cannot retain or reposition our sales and marketing personnel.

We may also or alternatively decide to collaborate with third-party marketing and sales organizations to commercialize any approved product candidates in the United States, in which event, our ability to generate product revenues may be limited. To the extent we rely on third parties to commercialize any products for which we obtain regulatory approval, we may receive less revenues than if we commercialized these products ourselves, which could materially harm our prospects. In addition, we would have less control over the sales efforts of any other third parties involved in our commercialization efforts, and could be held liable if they failed to comply with applicable legal or regulatory requirements.

We have no prior experience in the marketing, sale, and distribution of biopharmaceutical products, and there are significant risks involved in building and managing a commercial infrastructure. The establishment and development of commercial capabilities, including compliance plans, to market any products we may develop will be expensive and time-consuming and could delay any product launch, and we may not be able to successfully develop this capability. We will have to compete with other biopharmaceutical and pharmaceutical companies to recruit, hire, train, manage, and retain marketing and sales personnel, which is expensive and time-consuming and could delay any product launch. Developing our sales capabilities may also divert resources and management attention away from product development.

In the event we are unable to develop a marketing and sales infrastructure, we may not be able to commercialize CNTY-101 or our other product candidates, if approved, in the United States or elsewhere, which could limit our ability to generate product revenues and materially harm our business, financial condition, results of operations, and prospects.

If the market opportunities for our product candidates for which we receive marketing approval are smaller than we believe they are, our revenue may be adversely affected, and our business may suffer.

Cancer therapies are sometimes characterized as first-line, second-line, or third-line, and the FDA often approves new therapies initially only for third-line use. When cancer is detected early enough, first-line therapy, usually chemotherapy, hormone therapy, surgery, radiation therapy, or a combination of these, is sometimes adequate to cure the cancer or prolong life without a cure. Second- and third-line therapies are administered to patients when prior therapy is not effective. Initial planned clinical trials are expected to enroll patients who have received other available therapies in order to first evaluate whether the product is safe and whether there is any activity. Although we have initiated our first clinical trial of CNTY-101 in patients that have received prior lines of therapy, we have limited data, to date, on the side effect profile of our product candidate in humans and we do not know at this time whether any of our other product candidates will be safe for use in humans or whether they will demonstrate any anti-cancer activity. Subsequently, we plan to conduct additional clinical trials depending on the activity we note in the initial clinical trials. If the activity is sufficient, we may initially seek approval of any product candidates we develop as a therapy for patients who have received one or more prior treatments. Subsequently, for those products that prove to be sufficiently beneficial, if any, we would expect to seek approval potentially in earlier lines of therapy, but there is no guarantee that product candidates we develop, even if approved for later lines of therapy, would be approved for earlier lines of therapy, and, prior to any such approvals, we may have to conduct additional clinical trials.

We focus our research and product development on differentiating engineered iPSC into NK-, T-, or other immune cells for the treatment of various cancers. Our projections of both the number of people who have

113

Table of Contents

these cancers, as well as the subset of people with these cancers who have the potential to benefit from treatment with our product candidates, are based on beliefs and estimates. These estimates have been derived from a variety of sources, including the scientific literature, surveys of clinics, patient foundations or market research, and may prove to be incorrect. Further, new trials may change the estimated incidence or prevalence of such cancers. The total addressable market across all of our product candidates will ultimately depend upon, among other things, the diagnosis criteria included in the final label for each of our product candidates approved for sale for these indications, the availability of alternative treatments and the safety, convenience, cost, and efficacy of our product candidates relative to such alternative treatments, acceptance by the medical community and patient access, drug and biologic pricing, and reimbursement. The number of patients in the United States and other major markets and elsewhere may turn out to be lower than expected, patients may not be otherwise amenable to treatment with our product candidates, for which we receive marketing approval, or new patients may become increasingly difficult to identify or gain access to, all of which would adversely affect our results of operations and our business.

Our operating results may fluctuate significantly, which makes our future operating results difficult to predict and could cause our operating results to fall below expectations or any guidance we may provide.

Our quarterly and annual operating results may fluctuate significantly, which makes it difficult for us to predict our future operating results. These fluctuations may occur due to a variety of factors, many of which are outside of our control, including, but not limited to:

●the timing and cost of, and level of investment in, research, development, regulatory approval, and commercialization activities relating to CNTY-101 and our other product candidates, which may change from time to time;

●coverage and reimbursement policies with respect to CNTY-101 and our other product candidates, if approved, and potential future drugs or biologics that compete with our products;

●the cost of manufacturing CNTY-101 and our other product candidates, which may vary depending on the quantity of production and the terms of our agreements with CMOs;

●the timing and amount of the milestone or other payments we must make to the licensors and other third parties from whom we have in-licensed or acquired our product candidates;

●the level of demand for any approved products, which may vary significantly;

●future accounting pronouncements or changes in our accounting policies; and

●any other change in the competitive landscape of our industry, including consolidation among our competitors or partners.

The cumulative effects of these factors could result in large fluctuations and unpredictability in our quarterly and annual operating results. As a result, comparing our operating results on a period-to-period basis may not be meaningful. Investors should not rely on our past results as an indication of our future performance.

This variability and unpredictability could also result in our failing to meet the expectations of industry or financial analysts or investors for any period. If our revenue or operating results fall below the expectations of analysts or investors or below any forecasts we may provide to the market, or if the forecasts we provide to the market are below the expectations of analysts or investors, the price of our common stock could decline substantially. Such a stock price decline could occur even when we have met any previously publicly stated revenue or earnings guidance we may provide.

114

Table of Contents

Risks related to employee matters, managing growth and other risks related to our business

We are dependent on the services of our management and other clinical and scientific personnel, and if we are not able to retain these individuals or recruit additional management or clinical and scientific personnel, our business will suffer.

Our success depends in part on our continued ability to attract, retain, and motivate highly qualified management, clinical, and scientific personnel, many of whom have been instrumental for us and have substantial experience with our iPSC-derived allogeneic cell therapy platforms, underlying technologies, and related product candidates. Given the specialized nature of our iPSC-derived allogeneic cell therapy platforms and the fact that ours is a novel and emerging field, there is an inherent scarcity of experienced personnel in this field. As we continue developing our product candidates in our pipeline, we will require personnel with medical, scientific, or technical qualifications specific to each program.

We are highly dependent upon our senior management, particularly Osvaldo Flores, Ph.D., our Chief Executive Officer, as well as our senior scientists and other members of our executive team. The loss of services of any of these individuals could delay or prevent the successful development of our product pipeline, initiation or completion of our planned clinical trials, or the commercialization of CNTY-101 and our other product candidates. We have executed employment agreements or offer letters with each member of our senior management team, these agreements are terminable at will with or without notice and, therefore, we may not be able to retain their services as expected. We do not currently maintain “key person” life insurance on the lives of our executives or any of our employees. This lack of insurance means that we may not have adequate compensation for the loss of the services of these individuals.

Our research and development programs, clinical operations, and sales and marketing efforts depend on our ability to attract and retain highly skilled scientists, engineers, and sales professionals. The competition for qualified personnel in the biotechnology and pharmaceutical industries is intense, and we have from time to time experienced, and we expect to continue to experience, difficulty in hiring and retaining employees with appropriate qualifications on acceptable terms, or at all. Many of the companies with which we compete for experienced personnel have greater resources than we do, and any of our employees may terminate their employment with us at any time. If we hire employees from competitors or other companies, their former employers may attempt to assert that these employees or we have breached legal obligations, resulting in a diversion of our time and resources, and potentially, damages. In addition, job candidates and existing employees often consider the value of the stock awards they receive in connection with their employment. If the perceived benefits of our stock awards decline, it may harm our ability to recruit and retain highly skilled employees. If we fail to attract new personnel or fail to retain and motivate our current personnel, our business and future growth prospects would be harmed.

We will need to increase the size and capabilities of our organization, and we may experience difficulties in managing our growth.

As of March 2, 2023, we had 184 employees and consultants and most of our employees are full-time. As our development and commercialization plans and strategies develop, and as we transition into operating as a public company, we must add a significant number of additional managerial, operational, financial, and other personnel. Future growth will impose significant added responsibilities on members of management, including:

●identifying, recruiting, integrating, maintaining, and motivating additional employees;

●managing our internal development efforts effectively, including additional clinical and FDA or other comparable authority review process for CNTY-101 and our other product candidates, while complying with our contractual obligations to contractors and other third parties; and

115

Table of Contents

●improving our operational, financial, and management controls, reporting systems, and procedures.

Our future financial performance and our ability to commercialize CNTY-101 and our other product candidates, if approved, will depend, in part, on our ability to effectively manage any future growth, and our management may also have to divert a disproportionate amount of its attention away from day-to-day activities in order to devote a substantial amount of time to managing these growth activities. In addition, we expect to incur additional costs in hiring, training, and retaining such additional personnel.

If we are not able to effectively expand our organization by hiring new employees and expanding our groups of consultants and contractors, we may not be able to successfully implement the tasks necessary to further develop and commercialize CNTY-101 and our other product candidates and, accordingly, may not achieve our research, development, and commercialization goals.

The COVID-19 pandemic, or a similar pandemic, epidemic, or outbreak of an infectious disease, may materially and adversely affect our business and our financial results and could cause a disruption to the development of our product candidates.

Public health crises, such as pandemics or similar outbreaks, could adversely impact our business. The impact of the COVID-19 pandemic and the efforts to mitigate it, resulted in and will likely continue to result in disruptions to the global economy, as well as businesses and capital markets around the world. We experienced modest delays in our discovery and development activities as a result of the COVID-19 pandemic, primarily due to temporary and partial shutdowns at certain of our CROs and academic institutions that have since resumed operations, and due to governmental responses to the pandemic. We implemented a mandatory vaccination policy for all employees and have taken other precautionary measures, including testing of any employees displaying symptoms of COVID-19. While the vaccines have proven effective in reducing the severity and mortality of COVID-19 including the variants that have evolved to date, the emergence of new variants, which could prove resistant to existing vaccines, could again result in major disruptions to businesses and markets worldwide. The extent to which the COVID-19 pandemic will continue to impact our operations or those of our consultants and collaborators, will depend on future developments, including the global macroeconomic effects of the virus.

IPSC US Equity

IPSC · 10-K · period ended 2022-12-31

ITEM 1A. RISK FACTORS

IPSC US Equity☆

IPSC · 10-K · period ended 2022-12-31

ITEM 1A. RISK FACTORS

IPSC US Equity