ipgp-20251231
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Mark One)
For the fiscal year endedDecember 31, 2025
OR
For the transition period from to .
Commission File Number: 001-33155
IPG PHOTONICS CORPORATION
(Exact name of registrant as specified in its charter)
377 Simarano Drive, Marlborough, Massachusetts 01752
(Address of principal executive offices) (Zip Code)
Registrant's telephone number, including area code: (508) 373-1100
Securities registered pursuant to Section 12(b) of the Act:
Title of Class Trading Symbol Name of Exchange on Which Registered
Common Stock, Par Value $0.0001 per share IPGP The Nasdaq Stock Market LLC
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes☑ No ☐
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐No☑
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes☑ No ☐
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes☑ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or emerging growth company. See the definitions of "large accelerated filer," "accelerated filer," "smaller reporting company" and "emerging growth company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer ☑ Accelerated filer ☐
Non-accelerated filer ☐ Smaller reporting company ☐
Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☑
If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☑
The aggregate market value of the registrant's common stock held by non-affiliates of the registrant was approximately $1.8 billion, calculated based upon the closing price as reported by the Nasdaq Global Select Market on June 30, 2025. For purposes of this disclosure, shares of common stock held by persons who own 5% or more of the outstanding common stock and shares of common stock held by each officer and director have been excluded in that such persons may be deemed to be "affiliates" as that term is defined under the Rules and Regulations of the Exchange Act. This determination of affiliate status is not necessarily conclusive.
As of February 20, 2026, 42,191,353 shares of the registrant's common stock were outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
None
Table of Contents
TABLE OF CONTENTS
PART I
ITEM 1. BUSINESS 3
ITEM 1A. RISK FACTORS 14
ITEM 1B. UNRESOLVED STAFF COMMENTS 30
ITEM 1C. CYBERSECURITY 30
ITEM 2. PROPERTIES 31
ITEM 3. LEGAL PROCEEDINGS 31
ITEM 4. MINE SAFETY DISCLOSURES 31
PART II
ITEM 6. RESERVED 33
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK 46
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA 47
ITEM 9A. CONTROLS AND PROCEDURES 47
ITEM 9B. OTHER INFORMATION 50
ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS 50
PART III
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE 51
ITEM 11. EXECUTIVE COMPENSATION 51
ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES 51
PART IV
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES 52
SIGNATURES 56
INDEX TO FINANCIAL STATEMENTS F-1
1
Table of Contents
This Annual Report on Form 10-K contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, and we intend that such forward-looking statements be subject to the safe harbors created thereby. For this purpose, any statements contained in this Annual Report on Form 10-K except for historical information are forward-looking statements. Without limiting the generality of the foregoing, words such as "may," "will," "expect," "believe," "anticipate," "intend," "target," "project," "intend," "plan," "seek," "strive," endeavor," goal," "could," "estimate," or "continue" or the negative or other variations thereof or comparable terminology are intended to identify forward-looking statements. In addition, any statements that refer to projections of our future financial performance, trends in our businesses, or other characterizations of future events or circumstances are forward-looking statements.
The forward-looking statements included herein are based on current expectations of our management based on available information and involve a number of risks and uncertainties, all of which are difficult or impossible to accurately predict and many of which are beyond our control. As such, our actual results may differ significantly from those expressed in any forward-looking statements. Factors that may cause or contribute to such differences include, but are not limited to, those discussed in more detail in Item 1 (Business) and Item 1A (Risk Factors) of Part I and Item 7 (Management's Discussion and Analysis of Financial Condition and Results of Operations) of Part II of this Annual Report on Form 10-K. Readers should carefully review these risks, as well as the additional risks described in other documents we file from time to time with the Securities and Exchange Commission (the "SEC"). In light of the significant risks and uncertainties inherent in the forward-looking information included herein, the inclusion of such information should not be regarded as a representation by us or any other person that such results will be achieved, and readers are cautioned not to rely on such forward-looking information. We undertake no obligation to revise the forward-looking statements contained herein to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.
2
Table of Contents
PART I
ITEM 1. BUSINESS
Our Company
IPG Photonics Corporation ("IPG", the "Company", the "Registrant", "we", "us" or "our") develops, manufactures and sells high-performance fiber lasers, fiber amplifiers, diode lasers and laser-based systems that are used for diverse applications in materials processing, medical and advanced applications. Fiber lasers combine the advantages of semiconductor diodes, such as long life and high efficiency, with the high amplification and precise beam qualities of specialty optical fibers to deliver superior performance, reliability and usability.
We sell our products globally to original equipment manufacturers ("OEMs"), system integrators and end users. We market our products internationally, primarily through our direct sales force. Our major manufacturing facilities are located in the United States and Germany. We have sales service offices and applications laboratories worldwide.
We are vertically integrated such that we design and manufacture most of the key components used in our finished products, from semiconductor diodes to optical fiber preforms, finished fiber lasers and amplifiers. We manufacture complementary products used with our lasers including optical delivery cables, fiber couplers, beam switches, optical processing heads, in-line sensors and chillers. Our vertically integrated operations allow us to control quality, rapidly develop and integrate advanced products and protect our proprietary technology.
We are listed on the Nasdaq Global Select Market (ticker: IPGP). We began operations in 1990, and we were incorporated in Delaware in 1998. Our principal executive offices are located at 377 Simarano Drive, Marlborough, Massachusetts 01752, and our telephone number is (508) 373-1100.
Industry Overview
Laser technology has revolutionized a broad range of applications and products in manufacturing, automotive, aerospace, medical, research, consumer electronics, semiconductors and communications. A laser converts electrical energy to optical energy that can be focused and shaped, creating a powerful, concentrated beam that causes materials to melt, vaporize or change their character. In a laser, an energy source excites or pumps a gain medium, which converts the energy from the source into an emission consisting of particles of light, called photons, at particular wavelengths. Lasers provide flexible, non-contact and high-speed ways to process and treat various materials and enable automated production, miniaturization and increasing product complexity.
Lasers are utilized in materials processing applications requiring very high power densities, such as cutting, welding, marking, engraving, additive manufacturing, ablation and cleaning, printing, drilling and cladding. Historically, machine tools such as grinding machines, mechanical saws, milling machines, lathes, presses, water jet cutters, plasma cutters and welding machines have been used to cut, join, form or otherwise process metal in the production of finished goods such as automobiles, consumer appliances, electronics and heavy machinery. Also, lasers are utilized in applications that require consistent and stable operation with lower power densities, such as heating, cleaning and drying. Laser-based systems are gaining share within the materials processing market because of the greater precision, processing speeds and flexibility enabled by this technology. Beyond materials processing, lasers are well-suited for imaging and inspection applications and the ability to confine laser light to narrow wavelengths makes them particularly effective in medical, non-destructive inspection and sensing applications.
Fiber Lasers
Fiber lasers use semiconductor diodes as the energy source to pump a gain medium consisting of specialty optical fibers, which are infused with rare earth ions. These fibers are called active fibers and are comparable in diameter to a human hair. The laser emission is created within optical fibers and delivered through a flexible optical fiber cable. As a result of their different design and components, fiber lasers are more reliable, efficient, robust, compact and easier to operate than gas, crystal and solid state lasers that were initially used in industrial applications. In addition, fiber lasers free the end users from fine mechanical adjustments and the high maintenance costs that are typical for other laser technologies.
Although low power fiber lasers were introduced four decades ago, their increased adoption in the last twenty years has been driven primarily by our improvements in their output power levels and cost, as well as their superior performance, lower cost of ownership and greater reliability compared with other laser and non-laser technologies. We successfully increased output power levels, efficiency and reliability by improving optical components such as diodes and active fibers that increased
3
Table of Contents
their power capacities and improved their performance. Fiber lasers now offer output powers that exceed those of other laser technologies in many categories. Our substantial advancements in diode technology, packaging design and other optical components together with increased production volumes over the last two decades reduced the cost and increased the reliability of our products. As a result, the average cost per watt of output power has decreased dramatically and our fiber lasers effectively compete in many applications that historically used other laser technologies and non-laser solutions. We believe that fiber lasers provide a combination of benefits that include: superior performance; enhanced end user productivity; lower cost of ownership and environmentally friendly operation; greater ease of use; a more compact footprint; and greater choice of wavelengths and more precise beam control. Our strategy is to target new applications where fiber lasers provide benefits compared to use of other laser technologies and non-laser solutions. Despite the benefits of fiber lasers, certain applications and processes continue to rely on other laser and non-laser technologies that deliver superior performance for particular features or uses.
Our Competitive Strengths
Our key strengths and competitive advantages include the following:
Leading Producer of Fiber Laser Technology. As a pioneer and technology leader in fiber lasers, we are able to leverage our expertise to drive the proliferation of fiber lasers in existing and new applications.
Vertically Integrated Development and Manufacturing. We develop and manufacture most of the critical high-value specialty components used in our lasers, as well as laser subsystems and systems, and certain complementary products such as optical heads and process measuring and monitoring technologies. We believe this vertically integrated approach enhances our ability to meet customer requirements, control quality and supply, and accelerate product development.
Manufacturing Scale. We have invested extensively in our production capabilities allowing us to efficiently manufacture and deliver large volumes of fiber lasers in short delivery cycles which provide us with a competitive advantage.
Breadth and Depth of Expertise. Our extensive know-how in materials sciences and experience in optical, electrical, mechanical and semiconductor engineering enable us to develop and manufacture proprietary components, products, accessories and systems and assist customers in improving their manufacturing using our fiber lasers.
Broad Product Portfolio and Ability to Meet Customer Requirements. Our broad range of standard and custom fiber lasers operating at various wavelengths and pulse durations allow us to meet varied customer requirements. Further, our vertically integrated manufacturing and broad technology expertise allow us to design, prototype and commence high-volume commercial production of our products rapidly.
Diverse Customer Base, End Markets and Applications. Our diverse customer base, end markets and applications provide us with many growth opportunities. In 2025, we shipped products to thousands of customers worldwide. Our principal end markets and representative applications for lasers within those markets include:
4
Table of Contents
Materials Processing Markets
End Market Applications Principal Products
Hardening and cladding CW Lasers (1-125 kW) and IPG systems
Heating and drying Diode lasers (1-100 kW)
Cutting of high-strength steel and aluminum CW lasers (1-30 kW)
Welding tailored blanks, frames and auto parts CW lasers (1-50 kW)
Seam welding and brazing CW lasers( 1-20 kW) and IPG systems
Cladding of turbine blades and drill bits CW lasers (1-20 kW)
Solar cell processing Green NS pulsed lasers
Percussion drilling of aerospace parts QCW lasers (1-2.4 kW)
5
Table of Contents
Other Markets
End Market Applications Principal Products
Target designation Erbium CW lasers
Dazzlers Green pulsed laser (1 kW)
IR countermeasures, thermal imaging Mid-IR NS pulsed lasers
Therapeutic procedures Diode lasers
Dental procedures Diode lasers
Diagnostic procedures Mid-infrared and FS lasers
Products
We design and manufacture a broad range of high-performance fiber lasers and amplifiers. We also make direct diode lasers, packaged semiconductor diodes, laser and non-laser systems and laser based medical systems. Many of our products are designed to be used as general-purpose energy or light sources, making them useful in diverse applications and markets.
Our laser products are based on a common proprietary technology platform using many of the same core components, such as semiconductor diodes and specialty fibers, which we configure to our customers' specifications. Our engineers and scientists work closely with OEMs, system integrators and end users to develop and customize our products for their needs. Because of our flexible and modular product architecture, we offer products in different configurations according to the desired application, including modules, rack-mounted units and tabletop units. Our engineers and other technical experts work directly with the customer in our application and development centers to develop and configure the optimal solution for such customer's requirements. We also manufacture certain complementary products that are used with our lasers, such as optical delivery cables, fiber couplers, beam switches, optical processing heads, process measuring and monitoring technologies and chillers.
Lasers
Our laser products include medium (1 to 999 watts) and high (1,000 watts and above) output power lasers from 0.148 to 20 microns in wavelength. These lasers may be CW, QCW or pulsed. Our pulsed line includes nanosecond, picosecond and femtosecond lasers. We offer lasers with different gain mediums and wavelengths. The gain mediums are ytterbium, erbium and thulium, as well as Raman and hybrid fiber-solid state lasers using our crystal technology. We produce hybrid fiber-solid state lasers at green and ultraviolet wavelengths for a range of micro processing applications and in the mid-IR spectrum for sensing, imaging and spectroscopy applications. We also sell fiber pigtailed packaged diodes as components for pumping applications, and fiber coupled direct diode laser systems that use semiconductor diodes rather than optical fibers as their gain medium. In addition, we offer high-energy pulsed lasers, multi-wavelength lasers, tunable lasers, single-polarization and single-frequency lasers, as well as other versions of our products.
We believe that we produce the highest power solid-state lasers in the industry. Our ytterbium fiber lasers reach power levels of up to 125,000 watts. We also make single-mode and low-mode output ytterbium fiber lasers with power levels of up to 20,000 watts and single-mode, erbium and thulium fiber lasers with power levels of up to 4,000 watts.
For 2025 fiscal year, high power continuous wave ("CW") lasers accounted for 31% of revenue and were 34% and 41% of revenue, in 2024 and 2023, respectively. Pulsed lasers accounted for 14%, 15%, and 14% of revenue in 2025, 2024 and 2023, respectively.
Accessories
6
Table of Contents
We manufacture and sell accessories that include high power optical fiber delivery cables, fiber couplers, beam switches, chillers and scanners for our fiber lasers. We are expanding our line of cutting and welding optical processing heads for use with our fiber lasers and sell devices for in-line coherent monitoring for welding.
Systems
In addition to selling laser sources, we also offer a range of integrated and custom-developed laser systems designed to meet specific customer manufacturing requirements. These systems include our LightWELD product line, which is a handheld laser welding system to provide fabricators a laser-based solution for welding, as well as high precision laser systems for the medical technology industry, multi‐axis Cartesian systems for fine welding, cutting, and drilling applications and 2D compact flat sheet cutting systems. Our subsidiary Genesis Systems Group, LLC also provides laser and non-laser robotic welding and automation solutions. We also develop and sell specialized laser systems for unique material processing applications for customers seeking complete, laser-based solutions. With the addition of our cleanLASER product line, we have expanded our system offerings to include laser-based surface preparation and cleaning systems, which provide a dry, media-free alternative to traditional abrasive or chemical-based cleaning methods for surface preparation and coating or contaminant removal. These surface cleaning and preparation solutions represent an complementary systems segment to our welding and cutting offerings. For the 2025, 2024 and 2023 fiscal years, laser and non-laser systems accounted for 15%, 14%, and 13%, respectively, of revenues.
Our Markets
We broadly classify our principal end markets as material processing, medical procedures and advanced applications. With the sale of our telecom transmission product lines in August 2022, we no longer intend to target communications as a principal market. The following table shows the allocation of our net sales (in thousands) among our principal markets:
Year Ended December 31,
% of Total % of Total % of Total
These estimates are based upon customer information and when customer information has not been provided, upon our best information and belief.
Materials Processing
The most significant materials processing applications for fiber lasers are welding and brazing and cutting. Other applications include marking and engraving, cleaning, additive manufacturing such as laser sintering and 3D printing, precision processing, drilling, heat treating, annealing and heating and drying.
Welding and Brazing Applications. Laser welding offers several important advantages compared to conventional welding technology as it is non-contact, precise, easy to automate, provides high process speed and results in narrow-seamed, high-quality welds that generally require little or no post-processing machining. The high beam quality of our fiber lasers coupled with high CW power offer deep penetration welding as well as shallow conduction mode welding. Adjustable mode beam (AMB) lasers allow for spatterless, precise high-quality welding and cutting. In addition, fiber lasers enable remote welding "on the fly," a flexible method of three-dimensional welding in which the laser beam is positioned by a robot-guided scanner. Remote welding stations equipped with fiber lasers are used for welding door panels, seat backs, spot and lap welds over the entire auto body frame ("body-in-white") and tailor welded blanks for automotive applications. We also offer a real-time weld monitoring system to determine weld quality in an integrated solution. Our LightWELD product line offers a handheld laser welding system that is easier to learn and operate than traditional solutions and offers high process consistency. Our products are used also for laser brazing of visible joints in automobiles such as tailgates, roof joints and columns. Brazing is a method of joining sheet metal by using a melted filler material similar to soldering but requiring higher temperatures.
Cutting Applications. Laser-based cutting technology has several advantages compared to alternative technologies. Laser cutting is fast, flexible and highly precise and can be used to cut complex contours on flat, tubular or three-dimensional materials. The laser source can be programmed to process many different kinds of materials such as steel, aluminum, brass, copper, glass, ceramic and plastic at various thicknesses. Laser cutting technology is a non-contact process that is easy to integrate into an automated production line and is not subject to wear of the cutting medium. We sell mid and high power
7
Table of Contents
ytterbium fiber lasers for laser cutting. Our high power pulsed lasers are used in thin foil cutting applications in electric vehicle battery production. High electrical efficiency, low maintenance and operating cost, excellent beam quality, wide operating power range, power stability and small spot size are some of the qualities offered by IPG fiber lasers for many cutting applications, which enable customers to cut a variety of materials faster.
Marking and Engraving Applications. Laser marking is a non-contact process that uses a focused beam of light to create a long lasting or permanent mark on a surface by transferring heat energy to the target material to generate visible markings on or just under the surface via controlled burning. ablation or photochemical changes. The high-precision and small spot size of focused laser beams enables the creation of complex and high-resolution marks which are often used for labeling, product tracking, machine vision, and regulatory compliance. Lasers can mark a wide variety of materials including metals and non-metals like polymers, ceramics, and glass. Our fiber lasers provide a fast, reliable, and cost‐effective source for marking and engraving across industries such as automotive, electronics, aerospace, semiconductor, and medical devices.
Additive Manufacturing. Laser additive manufacturing encompasses a range of processes, including selective laser melting and sintering, laser metal fusion and laser metal deposition. These technologies enable flexible, high-speed production and are used for both rapid prototyping and industrial manufacturing. Our lasers enable manufacturers to efficiently produce complete parts or add features to existing components.
Medical Procedures
We sell our complete medical laser systems, and commercial fiber and diode laser modules, subassemblies and delivery fibers to medical device manufacturers that sell our medical laser systems under their brand or incorporate our products into their devices. We manufacture complete medical laser systems and consumable fibers primarily for urology applications, including benign prostatic hyperplasia and lithotripsy, based on our thulium fiber laser technology. Our ultrafast, CW and QCW ytterbium, erbium, thulium fiber and hybrid lasers with average power from 1 to 200 watts, and diode laser systems can be used in various medical and biomedical applications. Aesthetic applications addressed by IPG laser modules include skin rejuvenation, hair removal, and treatment of pigmented and vascular lesions.
Advanced Applications
Our fiber lasers and amplifiers are utilized by commercial firms and by academic and government institutions worldwide for advanced and scientific applications. These markets may sell specialty products developed by us or our commercial products. Representative applications include directed energy, spectroscopy, optical trapping, remote sensing, LIDAR, semiconductor metrology and inspection, and materials characterization. Separately, we have developed and launched CROSSBOWTM, a counter-unmanned aircraft system (counter‐UAS) solution offered to government and other authorized parties as part of our advanced application offerings.
Technology
Our products are based on our proprietary technology platform that we have developed and refined since our formation. The following technologies are key elements in our products.
Specialty Optical Fibers
We have extensive expertise in the disciplines and techniques that form the basis for the multi-clad active and passive optical fibers used in our products. We believe that our large portfolio of specialty active and passive optical fibers has a number of advantages as compared to other commercially available optical fibers. Using our knowledge of optical fibers, we recently extended our product line by manufacturing fibers used as a consumable component with our proprietary medical laser systems.
Semiconductor Diode Laser Processing and Packaging Technologies
We use multiple multi-mode, or broad area, single-emitter diodes rather than diode bars or stacks as a pump source. We believe that multi-mode single-emitter diodes are the most efficient and reliable pumping source presently available, surpassing diode bars and stacks in efficiency, brightness and reliability. Single-emitter diodes have substantially reduced cooling requirements and typically have long lifetimes at high operating currents, compared to typical lifetimes of diode bars.
We developed advanced molecular beam epitaxy techniques to grow aluminum indium gallium arsenide wafers for our diodes. This method yields high-quality optoelectronic material for low-defect density and high uniformity of optoelectronic parameters. In addition, we have developed numerous proprietary wafer processes and testing and qualification procedures in order to create a high energy output in a reliable and high power diode. Our diode is packaged to dissipate heat produced by the diode and withstands vibration, shock, high temperature, humidity and other environmental conditions, enabling world-class reliability and efficiency of the products.
8
Table of Contents
Specialty Components and Combining Techniques
We developed a wide range of advanced optical components that are capable of handling high optical power levels and contribute to the superior performance, efficiency and reliability of our products. In addition to fibers and diodes, our optical component portfolio includes fiber gratings, couplers, isolators, combiners, and crystals. We also developed special methods and expertise in splicing fibers together with low optical energy loss and on-line loss testing. We believe that our internal development and manufacturing of key optical components allows us to lower our manufacturing costs and improve product performance and reliability.
Side Pumping of Fibers and Fiber Block Technologies
Our technology platform allows us to efficiently combine a large number of multi-mode single-emitter semiconductor diodes with our active optical fibers that are used in all of our products. A key element of this technology is that we pump our fiber lasers through the cladding surrounding the active core. We splice our specialty active optical fibers with other optical components and package them in a sealed box, which we call a fiber block. The fiber blocks are compact and are designed to eliminate the risk of contamination or misalignment due to mechanical vibrations and shocks as well as temperature or humidity variations. Our design is scalable and modular, permitting us to make products with high output power by coupling a large number of diodes with fiber blocks, which can be combined in parallel and serially.
High-Stress Testing
We employ high-stress techniques in testing components and final products that help increase reliability and accelerate product development. For example, we test all of our diodes with high current and temperatures to identify and eliminate potentially unreliable diodes. We also have built a large database of diode test results that allows us to predict the estimated lifetime of our diodes. This testing allows us to eliminate defective diodes prior to further assembly and thus increase reliability.
Research and Development
We perform research and development to develop new products or components, improve existing products or components, develop new applications for our products and improve our manufacturing processes.
We research, develop and manufacture most of the key components of our lasers. In addition to our cladding-pumped specialty fiber platform, we have core competencies in high power multi-mode and single-mode semiconductor diodes, diode packaging, specialty active and passive optical fibers, high-performance optical components, crystal growth and processing, fiber gain blocks and fiber modules, thin film optical coatings, as well as splicing and combining techniques and high-stress test methods. The strategy of developing our proprietary components has allowed us to leverage our optical experience and large volume requirements to lower the cost of our products.
Our research and development supports expanding and improving our product line by increasing power levels, improving beam quality and electrical efficiency, decreasing the size of our products and lowering the cost per watt. We are engaged in research projects to expand the spectral range of products that we offer. We are investing our research and development funds on laser systems and products for medical applications.
We have assembled a team of scientists and engineers with specialized experience and knowledge in fiber lasers and amplifiers, materials science, optics, critical components, testing and manufacturing process design, and laser application development. Our team of experienced scientists and engineers works closely with many of our customers to develop and introduce custom products and laser processing that address specific applications and performance requirements.
We incurred research and development costs of approximately $117.4 million, $109.8 million and $98.7 million for the years ended December 31, 2025, 2024 and 2023, respectively. We expect to continue our commitment to research and development and to introduce new products, systems and complementary products. See Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations."
Intellectual Property
We rely on the technical expertise, creativity, and knowledge of our personnel, and we utilize trade secret, patent, trademark, copyright and contractual protections to maintain our competitive position and protect our proprietary rights in our products and technology. While our intellectual property rights are important to our success, we believe that our business as a whole is not materially dependent on any particular patent, trademark, copyright or other intellectual property right. IPG has used, registered or applied to register a number of trademark registrations in the United States and in other countries.
As of December 31, 2025, we have over 900 patents issued and over 450 pending patent applications worldwide. Intellectual property rights, including those that we own, those that we license and those of others, involve significant risks. See Item 1A, "Risk Factors — We are subject to litigation alleging that we infringe third-party intellectual property rights.
9
Table of Contents
Intellectual property claims could result in costly litigation and harm our business." and "Risk Factors — Our inability to protect our intellectual property and proprietary technologies could result in the unauthorized use of our technologies by third parties, hurt our competitive position and adversely affect our operating results."
Manufacturing
Vertical integration is one of our core business strategies through which we control our proprietary processes and technologies as well as the supply of critical high-value specialty components and assemblies. Our vertically integrated manufacturing operations currently include the manufacturing or assembly of optical preforms, specialty fiber, semiconductor wafers, semiconductor diode chips and packaged semiconductor diodes, specialty optical components, fiber blocks, fiber laser modules, power supplies, circuit boards, electronics and control systems and software, crystals, chillers, housings and cabinets and final assembly of finished product. We nonetheless may utilize third‐party suppliers for certain components and subassemblies that we determine are not strategically critical or cost‐effective to manufacture internally. In addition, we make some of the automated production systems, tools and fixtures and testing systems that we use in our own manufacturing processes. Over the last several years, we added additional production capabilities, including multi-wafer growth reactors, diode test stations, fiber preform and fiber drawing equipment and mid and high power laser production and testing, in order to increase our capacity as well as reduce the risks associated with our production processes.
We operate our own semiconductor foundry for the production of multi-mode single-emitter diodes used as pump sources in our lasers. We also process, package and extensively test all our diodes. We developed proprietary components and accessories, manufacturing tools, equipment and techniques over many years in an effort to address the major issues that had been inhibiting the development of fiber laser technology and to provide products that differentiate us from our competitors. In addition, we have acquired the technology to produce additional components, such as volume Bragg gratings and crystals. Using our technology platform, we configure standard laser and amplifier products based upon each customer's specifications. We have developed proprietary testing methodologies that allow us to develop higher power components and products in short periods of time, enable us to introduce products to the market more quickly, capitalize on new opportunities and provide superior service to our customers. In our materials processing systems business, we manufacture standard configuration systems and also systems customized for specific customer requirements. We purchase common and specialized mechanical, electrical and optical parts and raw materials from vendors.
Sales, Marketing and Support
We market our products internationally primarily through our direct sales force. Our direct sales force sells to end users, OEMs and systems integrators. Once our fiber laser products are designed into an OEM system, the OEM's sales force markets its systems, allowing us to leverage our sales capability through the OEM sales channels because the OEMs typically have several salespersons in locations other than where our sales offices are located. We have sales and service offices and application development centers in the Americas, Europe and Asia. To a lesser extent, we market through agreements with independent sales representatives and distributors, but we do use such channels more widely for our LightWELD product. In 2023, we entered into a strategic partnership with Miller Electric Mfg. LLC, a leading worldwide manufacturer of arc welding products, to further promote laser solutions for handheld welding applications. We also sell complete medical laser systems and fibers to medical technology companies that sell and support our products under their names. We typically provide one to five-year parts and service warranties on lasers. Most of the Company's sales offices provide support to customers in their respective geographic areas.
Customers
We sell our products globally to OEMs, system integrators and end users in a wide range of diverse markets who have the in-house engineering capability to integrate our products into their own systems. We also sell complete laser and non-laser solutions to end users for their production needs. We have thousands of customers worldwide.
10
Table of Contents
Competition
Our markets are highly competitive and characterized by rapidly changing technology, continuously evolving customer requirements and reduced average selling prices over time. In the materials processing market, we compete with makers of fiber lasers and other lasers, such as Coherent, Inc., JPT Opto-Electronics Co. Ltd., Laserline GmbH, Lumentum Holdings Inc., Maxphotonics Co., Ltd., MKS Instruments, Inc., nLight, Inc., Trumpf GmbH + Co. KG and Wuhan Raycus Fiber Laser Technologies Co. Ltd., as well as other smaller competitors. Some of our customers have developed products for their own use which are competitive to our products. Such vertical integration by our customers could reduce the market opportunity for our products. Many of our fiber laser competitors are increasing the output powers of their fiber lasers and reducing sales prices to compete with our products.
We also compete with our customers that produce their own laser technology as well as with manufacturers of non-laser methods and tools, such as traditional non-laser welding, cutting dies, mechanical cutters and plasma cutters in the materials processing market.
Some of our competitors are larger than we are and have substantially greater financial, managerial and technical resources, more extensive distribution and service networks, greater sales and marketing capacity, and larger installed customer bases than we do.
Backlog
At December 31, 2025, our backlog of orders (generally scheduled for shipment within one year) was approximately $631.5 million compared to $636.2 million at December 31, 2024. At December 31, 2025, our backlog included $399.0 million of orders with firm shipment dates and $232.5 million of frame agreements that we expect to ship within one year, compared to $371.1 million of orders with firm shipment dates and $265.1 million of frame agreements at December 31, 2024. Frame agreements are non-binding indications of customer pricing and volume levels but are not firm customer purchase obligations with delivery dates. Orders used to compute backlog are generally cancellable without substantial penalties or any penalties. We anticipate shipping a substantial majority of the present backlog during fiscal year 2026. However, our backlog at any given date is not necessarily indicative of actual sales for any future period.
Employees and Human Capital Management
Our skilled and experienced employees within our manufacturing, sales, service, research and development and quality assurance departments are instrumental in driving operational execution and strong financial performance, advancing innovation and maintaining a strong quality and compliance program.
As of December 31, 2025, we had approximately 4,840 full-time employees, including 440 in research and development, 3,590 in manufacturing and service operations, 390 in sales and marketing, and 420 in general and administrative functions. As a global company, our employees are distributed throughout our more than thirty locations in twenty-four countries. Of our total full-time employees, approximately 2,070 were in the United States and 1,650 were in Germany. We have never experienced a work stoppage, and none of our employees at our principal manufacturing facilities are subject to a collective bargaining agreement.
The success and growth of IPG’s business is dependent in large part on our ability to attract, retain and develop a population of talented and high-performing employees at all levels of our organization. For our research, engineering and production management positions, we require employees with university and graduate-level degrees in physics, optics, electrical, mechanical and software engineering. Globally, the demand for employees with such levels of education is high and competitive.
To succeed in these conditions, IPG implements key recruitment and retention strategies, objectives and effectiveness measures as part of the overall management of our business. These core strategies are advanced through the following programs, policies and initiatives:
Competitive Pay and Benefits. IPG’s compensation programs are designed to align the compensation of our employees, who operate in a highly competitive and technologically challenging environment, with IPG’s business performance and to provide the proper incentives to attract, retain and motivate employees to achieve superior performance. The structure of our compensation programs balances incentive earnings for both short-term and long-term performance. Specifically:
•We provide employee wages that are competitive and consistent with employee’s positions, skill levels, experience, knowledge and geographic location.
•We provide competitive compensation programs designed to further align our employees' financial interests with the performance of the business and long-term value creation, including an annual cash bonus program, equity-based awards and an employee stock purchase program.
11
Table of Contents
•We generally provide annual increases and incentive compensation based on merit.
•We purchase compensation data from a compensation and benefits consulting firm to allow us to ensure we provide competitive compensation in the geographic locations in which we operate.
•We align our executives’ annual and long-term equity compensation with our stockholders’ interests by linking realizable pay with operating metrics and stock performance.
•We provide comprehensive benefit options designed to retain our employees and support their families in living healthier and more secure lives.
Employee recruitment, retention and development. IPG is committed to attracting the best talent from a broad array of sources to meet the current and future demands of our business. We have established relationships with trade schools, world-class universities, professional associations and industry groups to proactively attract talented and capable new hires. IPG sponsors formal apprentice and internship programs to build leadership capabilities for the future. IPG has a strong employee value proposition with a culture of innovation, driven by entrepreneurial spirit and collaboration embraced within an environment of individual respect, dignity and caring.
We monitor employee turnover rates as our success depends upon retaining and investing in our highly trained manufacturing and technical staff. IPG strives to decrease voluntary turnover rates and thereby increase employee tenure by ensuring a combination of competitive compensation, individual developmental opportunities and personal career enrichment and growth. Our retention at the technical, professional and executive levels is high.
Executive Officers of the Registrant
The following table sets forth certain information regarding our executive officers as of February 23, 2026:
Name Age Position with the Company
Mark Gitin, Ph.D. 59 Chief Executive Officer
Paulus Bucher, Ph.D. 59 Senior Vice President, Global Operations
Angelo Lopresti 62 General Counsel, Secretary and Senior Vice President
Timothy Mammen 56 Chief Financial Officer and Senior Vice President
Trevor Ness 53 Senior Vice President, Chief Revenue Officer
Igor Samartsev, Ph.D. 62 Senior Vice President, Chief Scientist
Mark M. Gitin, Ph.D. has served as the Chief Executive Officer of the company since June 2024. Previously, Dr. Gitin served in a number of positions at MKS Inc., including Executive Vice President and General Manager of MKS's Photonics Solutions Division since 2023. Prior to that, he served as Senior Vice President and General Manager of the Photonics Solutions Division from 2019 to 2023, and Vice President and General Manager of MKS's Photonics Business Unit from 2017 to 2019 and in 2018 he also assumed responsibility for the Instruments and Motion Business Unit. Prior to joining MKS, from March 1995 to September 2017, Dr. Gitin held various management positions covering a wide range of technologies at Coherent, Inc., including Vice President of Strategic Marketing, Vice President of Business Development, and Vice President and General Manager of the Diodes, Fibers and Systems Business Unit. Dr. Gitin holds a B.S. in Electrical Engineering from University of California, Davis and an M.Eng. and Ph.D. in Electrical Engineering from Cornell University.
Paulus Bucher, Ph.D. joined as Senior Vice President of Global Operations in June 2025. Prior to joining IPG, Dr. Bucher served as Senior Vice President of Global Operations at Adtran Holdings Inc. Earlier in his career, he held senior operations roles at ADVA, CommScope, and Ericsson. Dr. Bucher holds a Ph.D. in Aerospace Engineering from Princeton University and a Master of Science in Mechanical Engineering from Virginia Tech, where he studied under a Fulbright Scholarship. He also holds a Dipl.-Ing. (FH) from Fachhochschule Wiesbaden and earned his Fachhochschulreife at Waldorfschule Wahlwies in Germany.
Angelo P. Lopresti has served as our General Counsel, Secretary and Vice President since February 2001. He was promoted to Senior Vice President in February 2013. Prior to joining us, Mr. Lopresti was a partner at the law firm of Winston & Strawn LLP from 1999 to 2001. He was a partner at the law firm of Hertzog, Calamari & Gleason from 1998 to 1999 and an associate there from 1991 to 1998. He served on the board of Coastway Bancorp, Inc. from 2016 to 2018, prior to its acquisition by HarborOne Bancorp, Inc. Mr. Lopresti holds a B.A. in Economics from Trinity College and a J.D. from the New York University School of Law.
Timothy P.V. Mammen has served as our Chief Financial Officer since July 2000 and as Vice President since November 2000. He was promoted to Senior Vice President in February 2013. Between May 1999 and July 2000, Mr. Mammen served as the Group Finance Director and General Manager of the United Kingdom operations for IPFD. Mr. Mammen was Finance
12
Table of Contents
Director and General Manager of United Partners Plc, a commodities trading firm, from 1995 to 1999 and, prior to that, he worked in the finance department of E.I. du Pont de Nemours and Company. Mr. Mammen holds an Upper Second B.Sc. Honours degree in International Trade and Development from the London School of Economics and Political Science. He is a Chartered Accountant and a member of the Institute of Chartered Accountants of Scotland.
Trevor D. Ness has served as our Senior Vice President, Chief Revenue Officer since September 2025, with responsibility for leading the Company's global sales and service organizations, global go-to-market strategy and providing executive leadership to the company’s defense business. From February 2022 until September 2025, he served as IPG’s Senior Vice President, Sales and Strategic Business Development. From February 2013 until February 2022, Mr. Ness held the role of Senior Vice President, Worldwide Sales, and from January 2011 until February 2013, he served as Vice President, Asian Operations. Before joining IPG, Mr. Ness spent over a decade in Asia in progressive leadership roles with GSI Precision Technologies, including Director of China Operations and General Manager of Technical Sales in Japan and Taiwan. Earlier in his career, he held a range of service and commercial management roles in the United Kingdom. Mr. Ness holds a B.S. in Geology from Imperial College London, a Higher National Certificate from Bournemouth University, and an M.B.A. (Technology Management) from The Open University.
Igor Samartsev, Ph.D. has served as our Senior Vice President, Chief Scientist since February 2022. Prior to that, he was Chief Technology Officer from 2011 to 2022 and Deputy General Manager of one of our foreign subsidiaries from 2005 to 2011 after having served in technical leadership roles there. Dr. Samartsev holds a Ph.D. in Physics from the Imperial College London.
Seasonality
Our net sales can fluctuate from quarter to quarter with general economic trends, specific industry cycles, holidays in foreign countries such as Lunar New Year in the first quarter of our fiscal year and the timing of capital expenditures by our customers.
Government Regulation
Regulatory Compliance
The majority of our laser and amplifier products sold in the United States are classified as Class IV Laser Products under the applicable rules and regulations of the Center for Devices and Radiological Health ("CDRH") of the U.S. Food and Drug Administration ("FDA"). A similar classification framework applies in the European Union and other international markets. Safety rules are formulated with "Deutsche Industrie Norm" (i.e., German Industrial Standards) or International Organization for Standardization ("ISO") standards, which are internationally harmonized. CDRH regulations generally require a self-certification process, including submission of product reports for each product incorporating a laser device, periodic reporting of sales and purchases and compliance with product labeling standards, product safety and design features and informational requirements.
Our business activities are subject to various export controls and trade and economic sanctions laws and regulations, including, without limitation, the U.S. Commerce Department’s Export Administration Regulations ("EAR"), the U.S. Treasury Department’s Office of Foreign Assets Control’s trade and economic sanctions programs, the U.S. Department of State’s Nonproliferation Sanctions and International Traffic in Arms Regulations ("ITAR"), as well as comparable laws of the European Union, Germany and other jurisdictions, which we collectively refer to as Trade Controls. These requirements govern, among other things, the export, re‐export, transfer, sale, and provision of certain hardware, software, technology, and services. We further discuss the impact of such Trade Controls under "Risk Factors" in Item 1A "—We must comply with and could be impacted by various export controls and trade and economic sanctions laws and regulations that could negatively affect our business and may change due to diplomatic and political considerations outside of our control."
Our CROSSBOWTM products are also subject to additional regulatory regimes applicable to counter-unmanned aircraft systems (“counter-UAS”) and related sensing, tracking, or mitigation technologies. These regimes may include U.S. and non-U.S. laws restricting the sale, deployment, or export of counter-UAS capabilities, including evolving regulations applicable to government, critical infrastructure, and commercial end users.
Environmental Regulation
Our operations are subject to various federal, state, local and international laws governing the environment, including those relating to the storage, use, discharge, disposal, product composition and labeling of, human exposure to and hazardous and toxic materials. In the event of an accident involving such materials, we could be liable for damages and such liability could exceed the amount of our liability insurance coverage and the resources of our business.
13
Table of Contents
We face increasing complexity in our product design and procurement operations due to the evolving nature of environmental compliance regulations and standards, as well as specific customer compliance requirements. These regulations and standards have an impact on the material composition of our products entering specific markets. For example, the European Union ("EU") adopted the Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH), and China enacted the Management Methods for Controlling Pollution Caused by Electronic Information Products Regulation (China-RoHS). In addition to these regulations and directives, we may face costs and liabilities in connection with product take-back legislation.
Climate and Sustainability Reporting and Regulation
We operate in various jurisdictions around the world, including the U.S. and certain states, the European Union, and the United Kingdom, that have adopted or proposed laws related to climate and sustainability reporting. For example, the European Parliament adopted the Corporate Sustainability Reporting Directive (CSRD), which introduced additional due diligence and disclosure requirements addressing sustainability that we expect will apply to us in the coming years. These and future laws, regulations or policies could significantly increase our operational and compliance burdens and costs.
For further discussion of risks relating to the regulations to which we are subject, see Item 1A. Risk Factors.
Availability of Reports
Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to such reports are available free of charge on our website at www.ipgphotonics.com as soon as reasonably practicable after such reports are electronically filed with, or furnished to, the Securities and Exchange Commission ("SEC"). The SEC maintains an internet site that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at www.sec.gov. We will also provide electronic or paper copies of such reports free of charge, upon request made to our Corporate Secretary. The information included on our website is not a part of, nor is it incorporated by reference into, this annual report on Form 10-K.
ITEM 1A. RISK FACTORS
The factors described below are the principal risks that could materially adversely affect our operating results and financial condition. Other factors may exist that we do not consider significant based on information that is currently available. In addition, new risks may emerge at any time and we cannot predict those risks or estimate the extent to which they may affect us. You should carefully consider these factors, as well as the other information contained in this Annual Report on Form 10-K, when evaluating an investment in our securities.
Risks Relating to Economic Conditions
Uncertainty and adverse changes in the general economic conditions of markets in which we participate negatively affect our business.
Current and future conditions in the economy have an inherent degree of uncertainty. As a result, it is difficult to estimate the level of growth or contraction for the economy as a whole. It is even more difficult to estimate growth or contraction in various parts, sectors and regions of the economy, including the materials processing, medical procedures and advanced applications markets in which we participate. Because all components of our budgeting and forecasting are dependent upon estimates of growth or contraction in the markets and applications we serve and demand for our products, the prevailing economic uncertainties render estimates of future income and expenditures very difficult to make. A significant portion of our sales are to customers in China, which accounted for 29%, 25% and 28% of net sales in 2025, 2024 and 2023, respectively. Slowing economic growth or recession, tariff-trade wars or other adverse economic developments or uncertainty in any of our key markets, including in China, may result in a decrease in our sales. In addition, the U.S. presidential administration has implemented new tariff policies that substantially increased tariffs on foreign imports into the U.S. Other countries have responded with increased tariffs on U.S. goods. Additional tariffs will be considered and may be adopted by the U.S. government from time to time. New tariffs may have the effect of increasing our costs, reducing our sales, as well as slowing general economic activity. Adverse changes have occurred and may occur in the future as a result of declining or flat global or regional economic conditions, fluctuations in currency and commodity prices, wavering confidence, capital expenditure reductions, unemployment, declines in stock markets, contraction of credit availability, declines in real estate values, or other factors affecting economic conditions generally. These changes may negatively affect the sales of our products, increase exposure to losses from bad debts, increase the cost and decrease the availability of financing, increase the risk of loss on
14
Table of Contents
investments, or increase costs associated with manufacturing and distributing products. An economic downturn could have a material adverse effect on our business, financial condition and results of operations.
Downturns in the markets we serve, particularly materials processing, could have a material adverse effect on our sales and profitability.
Our business depends substantially upon capital expenditures by manufacturers in the materials processing market, which includes general manufacturing, automotive, aerospace, other transportation, heavy industry, electronics and photovoltaic industries. Approximately 86% of our revenues in 2025 were from customers in the materials processing market. Although applications in this market are broad, sales for these applications are cyclical and have historically experienced sudden and severe downturns and periods of oversupply, resulting in significantly reduced demand for capital equipment, including the products that we manufacture and market. For the foreseeable future, our operations will continue to depend upon capital expenditures by customers in these industries or markets, which, in turn, depend upon the demand, as well as forecasted demand, for their products or services. A softening of demand for our customers' products and services, whether caused by a weakening of the U.S. or global economies or other factors, may result in decreased revenue or growth for our customers and may lead to decreased demand for our products, which would reduce our sales and margins. We may not be able to respond by decreasing our expenses quickly enough or sufficiently, due in part, to our fixed overhead structure related to our vertically integrated operations and our commitments to continuing investment in research and development and infrastructure for long term growth.
Risks Relating to Industry Dynamics and Competition
The markets for our products are highly competitive and currently subject to significant price and technological competition, and if we are unable to compete successfully, it could result in reduced sales, reduced gross margins or the loss of market share.
We operate in industries that are characterized by significant price and technological competition. We compete with makers of fiber lasers, solid-state lasers, direct diode lasers, high power CO2, YAG and disc lasers. These include public and private companies such as Coherent, Inc., JPT Opto-Electronics Co. Ltd., Laserline GmbH, Lumentum Holdings Inc., Maxphotonics Co., Ltd., MKS Instruments, Inc., nLight, Inc., Trumpf GmbH + Co. KG, and Wuhan Raycus Fiber Laser Technologies Co. Ltd., as well as other smaller competitors. Several of these are larger and have substantially greater financial, managerial and technical resources, more extensive distribution and service networks, greater sales and marketing capacity, and larger installed customer bases than we do. Many of our fiber laser competitors are increasing the output powers, improving the quality of their fiber lasers and decreasing prices. Certain of our major global competitors are expanding their manufacturing, research and development, and sales capabilities in China, which may increase competitive pricing pressure, accelerate product innovation cycles, and strengthen their local customer relationships in that market. Many of our competitors in Asia are beginning to export their fiber lasers and fiber laser-based systems to non-Asia markets, which may impact our pricing and sales in such markets. Our current or potential customers may decide to develop and produce products for their own use which are competitive to our products. Such vertical integration could reduce the market opportunity for our products. We also compete in the materials processing, advanced and medical applications markets with end users that produce their own solid-state and gas lasers as well as with manufacturers of non-laser methods and tools, such as traditional non-laser welding, cutting dies mechanical cutters and plasma cutters in the materials processing market and other energy-based devices in the medical market.
We may not be able to successfully differentiate our current and proposed products from our competitors' products and current or prospective customers may not consider our products to be superior to competitors' products. To maintain our competitive position, we believe that we will be required to continue a high level of investment in research and development, application development, manufacturing facilities and customer service and support, and to react to market pricing conditions. As a result of the foregoing factors, competitive pressures have resulted in price reductions, reduced margins, loss of sales and loss of market share.
The laser industry is experiencing declining average selling prices, which could cause our gross margins to decline and harm our operating results.
Our products are experiencing and may in the future continue to experience a significant decline in average selling prices ("ASPs") as a result of increased competition, pressure to reduce prices from significant customers and new product and technology introductions. Market participants, particularly in China, have reduced and may continue to reduce, prices of competing products to gain market share. If the ASPs of our products decline further and we are unable to increase our unit volumes, introduce new or enhanced products with higher margins or reduce manufacturing costs to offset anticipated decreases
15
Table of Contents
in the prices of our existing products, our operating results may be adversely affected. In addition, because of our significant fixed costs, we are limited in our ability to reduce total costs quickly in response to any revenue shortfalls. Because of these factors, we have experienced and we may experience in the future material adverse fluctuations in our operating results on a quarterly or annual basis if the ASPs of our products continue to decline.
Our ability to maintain or increase sales depends upon our ability to develop new products, penetrate new applications and end markets for fiber lasers and maintain or increase our market share in existing applications.
Our level of sales will depend on our ability to generate sales of fiber lasers in new and developing markets including applications for lasers where they have not been used previously and in applications that use other lasers, such as CO2 and YAG lasers. Historically, a significant portion of our revenue growth has been derived from sales of fiber lasers primarily for applications where CO2 and YAG lasers historically have been used. We have made significant sales into the cutting, welding and marking and engraving applications, large applications where the use of other laser technologies was well established. As fiber lasers increase penetration in core materials processing applications and there is more competition in these core material processing applications, the development of new applications, end markets and products outside our core applications becomes more important to our ability to generate sales growth. In order to maintain or increase market demand for our products, we will need to devote substantial resources to:
•demonstrate the effectiveness of fiber lasers in new applications for materials processing, medical and advanced applications;
•successfully develop new product lines with competitive features;
•increase our direct and indirect sales efforts;
•effectively meet growing competition and pricing pressures; and
•continue to reduce our manufacturing costs and enhance our competitive position.
Potential customers may have substantial investments and know-how related to their existing laser and non-laser technologies and processes. They may perceive risks relating to the reliability, quality, usefulness and profitability of integrating fiber lasers in their systems when compared to other laser or non-laser technologies available in the market or that they manufacture themselves. Despite fiber lasers having better performance and prices compared to other lasers or tools, OEM customers may be reluctant to switch incumbent suppliers or we may miss the design cycles of our customers. Many of our target markets, such as the automotive, machine tool and other manufacturing, communications and medical industries, have historically adopted new technologies slowly. These markets often require long test and qualification periods or lengthy government approval processes before adopting new technologies.
If we are unable to successfully implement our strategy to develop new applications and end markets for our products or develop new products, our revenues, operating results and financial condition could be adversely affected. In addition, any newly developed or enhanced products may not achieve market acceptance or may be rendered obsolete or less competitive by the introduction of new products by other companies.
We depend on our OEM customers and system integrators to incorporate our products into their systems.
Our sales depend in part on our ability to maintain existing and secure new OEM customers. Our revenues also depend in part upon the ability of our current and potential OEM customers and system integrators to incorporate our laser and amplifier products. The commercial success of these systems depends to a substantial degree on the efforts of these OEM customers and system integrators to develop and market products that incorporate our technologies. Relationships and experience with traditional laser makers, limited marketing resources, reluctance to invest in research and development and other factors affecting these OEM customers and third-party system integrators could have a substantial impact upon our financial results. If OEM customers or integrators are not able to adapt existing tools or develop new systems to take advantage of the features and benefits of fiber lasers or if they perceive us to be an actual or potential competitor, then the opportunities to increase our revenues and profitability may be severely limited or delayed. Furthermore, if our OEM customers or third-party system integrators experience financial or other difficulties that adversely affect their operations, our financial condition or results of operations may also be adversely affected.
We may not successfully commercialize our CROSSBOWTM counter‐UAS laser systems.
We recently introduced integrated high‐energy laser systems designed to counter small unmanned aerial systems (UAS) under our CROSSBOWTM product line. These offerings differ from our historical participation in directed‐energy programs as a
16
Table of Contents
component supplier, as they are complete operational systems and represent a new area of potential growth for us. The commercial viability of this product line is uncertain, and it may not develop as we anticipate.
Adoption of counter‐UAS laser systems is still emerging. Defense and security procurement cycles can be long, unpredictable, and dependent on successful demonstrations, evaluations, and integration with existing architectures. Positive testing or customer interest may not lead to production contracts or sustained demand, and competing technologies from established defense contractors or alternative counter‐UAS providers could limit market opportunities.
If any of these risks materialize, our strategy to develop and commercialize the CROSSBOW product line may not be successful or generate the growth opportunities we anticipate.
Risks Relating to Our Operations
Our vertically integrated business results in high levels of fixed costs and inventory levels that may adversely impact our gross profits and our operating results in the event that demand for our products declines or we maintain excess inventory levels.
We have a high fixed cost base due to our vertically integrated business model. Approximately 74% of our approximately 4,840 employees as of December 31, 2025 were employed in our manufacturing operations. We may not adjust these fixed costs quickly enough or sufficiently to adapt to rapidly changing market conditions. Our gross profit, in absolute dollars and as a percentage of net sales, is impacted by our sales volume, the corresponding absorption of fixed manufacturing overhead expenses and manufacturing yields. In addition, because we are a vertically integrated manufacturer and design and manufacture our key specialty components, insufficient demand for our products may subject us to the risks of high inventory carrying costs and increased inventory obsolescence. If our capacity and production levels are not properly sized in relation to expected demand, we may need to record write-downs for excess or obsolete inventory. Because we are vertically integrated, the rate at which we turn inventory has historically been low when compared to our cost of sales. We do not expect this to change significantly in the future and believe that we will have to maintain a relatively high level of inventory compared to our cost of sales. As a result, we expect to have a significant amount of working capital invested in inventory. Changes in our level of inventory lead to an increase in cash generated from our operations when inventory is sold or a decrease in cash generated from our operations at times when the amount of inventory increases. Decreases in inventory may decrease our overhead absorption and decrease our gross margins and profitability.
Our manufacturing capacity and operations may not be appropriate for future levels of demand and may adversely affect our gross margins.
We have added manufacturing capacity at our facilities in the United States, Germany, Italy and Poland. Expansion of capacity was required to offset the loss of capacity at the factories we operated in Russia and Belarus due to sanctions. In connection with expansion projects, we may incur cost overruns, construction delays, project cancellations or regulatory issues which could cause our capital expenditures to be higher than what we currently anticipate, possibly by a material amount, which would in turn adversely impact our operating results. If our sales do not increase or if our revenue decreases from current levels, we may have significant excess manufacturing capacity and under-absorption of our fixed costs, which has adversely impacted and could adversely affect our gross margins and profitability.
A significant portion of our manufacturing facilities and production equipment, such as our semiconductor production and processing equipment, diode packaging equipment and diode burn-in stations, are special-purpose in nature. We may experience higher costs due to yield loss, production inefficiencies, equipment problems and lower margins until any operational issues associated with the opening of new manufacturing facilities are resolved.
Because we lack long-term purchase commitments from our customers, our sales can be difficult to predict, which could lead to excess or obsolete inventory and adversely affect our operating results.
We generally do not enter into long-term agreements with our customers obligating them to purchase our fiber lasers or amplifiers. Our business is characterized by short-term purchase orders and shipment schedules and, in some cases, orders may be canceled or delayed without significant penalty or any penalty. As a result, it is difficult to forecast our revenues and to determine the appropriate levels of inventory required to meet future demand. In addition, due to the absence of long-term volume purchase agreements, we forecast our revenues and plan our production and inventory levels based upon the demand forecasts of our OEM customers, end users and distributors, which are highly unpredictable and can fluctuate substantially. This could lead to increased inventory levels and increased carrying costs and risk of excess or obsolete inventory due to unanticipated reductions in purchases by our customers. In addition, provisions have been recorded as a result of changes in
17
Table of Contents
market prices of certain components, the value of those inventories that was realizable through finished product sales due to declines in certain end market demand and uncertainties related to the recoverability of the value of inventories due to technological and product changes, and excess quantities. If our OEM customers, end users or distributors fail to accurately forecast the demand for our products, fail to accurately forecast the timing of such demand, or are unable to consistently negotiate acceptable purchase order terms with customers, our results of operations may be adversely affected.
We depend upon internal production and on outside single or limited-source suppliers for many of our key components and raw materials, including cutting-edge optics and materials. Any interruption in the supply or availability of these key components and raw materials could adversely affect our results of operations.
We rely exclusively on our own production capabilities to manufacture certain of our key components, such as semiconductor diodes, specialty optical fibers and optical components. We do not have redundant production lines for some of our components, such as our diodes and some other components, which are made at a single manufacturing facility. These are not readily available from other sources at our current costs and may not be available at all. If our manufacturing activities were obstructed or hampered significantly, it could take a considerable length of time and capital investment, or it could increase our costs, to resume manufacturing or find alternative sources of supply. Many of the tools and equipment we use are custom-designed, and it could take a significant period of time to repair or replace them. Our primary manufacturing facilities are located in the United States and Germany, and we have added production in Italy and Poland. Despite our efforts to mitigate the impact of any flood, fire, natural disaster, political unrest, act of terrorism, war, trade sanctions, outbreak of disease or other similar event, our business could be adversely affected to the extent that we do not have redundant production capabilities if any of our major manufacturing facilities or equipment should become inoperable, inaccessible, damaged or destroyed.
We purchase certain raw materials used to manufacture our products and other components, such as semiconductor wafer substrates, diode packages, modulators, micro-optics, bulk optics and high power beam delivery products, from single or limited-source suppliers. We typically purchase our components and materials through purchase orders or agreed-upon terms and conditions and we do not have guaranteed supply arrangements with many of these suppliers. These suppliers are relatively small private companies that may discontinue their operations at any time and may be particularly susceptible to prevailing economic conditions. Some of our suppliers are also our competitors. Some of our suppliers may not be able to meet our requirements due to global demand for their components. As a result, we have experienced and may in the future experience longer lead times or delays in fulfillment of our orders. Furthermore, other than our current suppliers, there are a limited number of entities from whom we could obtain these supplies. We do not anticipate that we would be able to purchase these components or raw materials that we require in a short period of time or at the same cost from other sources in commercial quantities or that have our required performance specifications. Any interruption or delay in the supply of any of these components or materials, or the inability to obtain these components and materials from alternate sources at acceptable prices and within a reasonable amount of time, could adversely affect our business. If our suppliers face financial or other difficulties, if our suppliers do not maintain sufficient inventory on hand or if there are significant changes in demand for the components and materials we obtain from them, they could limit the availability of these components and materials to us, which in turn could adversely affect our business.
We must comply with and could be impacted by various export controls and trade and economic sanctions laws and regulations that could negatively affect our business and may change due to diplomatic and political considerations outside of our control.
A significant part of our business involves the export and import of components and products among many countries, including the U.S., Germany and China. Historically, we also exported and imported a limited number of components and products in Russia and Belarus with entities we operated in those regions, and our subsidiary in India imports a limited number of medical devices from our former Russian subsidiary pursuant to an agreement entered into in connection with the disposition of such subsidiary in 2024. The U.S. government and governments of other countries in which we do business have Trade Controls that impact our ability to export, re-export or transfer products, software and technology originating in those countries. Trade Controls may require that we obtain a license before we can export, re-export or transfer certain products, software or technology. The requirement to obtain a license could put us at a competitive disadvantage by restricting our ability to sell products to customers in certain countries or by giving rise to delays or expenses related to obtaining a license. We have experienced and, in the future, may experience delays in obtaining export licenses based on issues solely within the control of the applicable government agency. Licenses may also include conditions that limit the use, resale, transfer, re-export, modification, disassembly, or transfer of a product, software or technology after it is exported without first obtaining permission from the relevant government agency. Delays in obtaining or failure to obtain required export licenses may require us to defer shipments for substantial periods or cancel orders. Any of these circumstances could adversely affect our operations and, as a result, our financial results could suffer. Although we have implemented compliance measures designed to prevent transactions prohibited by current or future Trade Controls, we have previously identified, and may continue to identify, instances in which
18
Table of Contents
we exported products without obtaining the required export authorizations and/or submitting the required requests. As a result, we have submitted a limited number of voluntary self-disclosures regarding compliance with export control laws and regulations with the U.S. Department of Commerce’s Bureau of Industry and Security (“BIS”). BIS issued warning letters to the Company in response to the self-disclosures. Our failure to comply with these laws and regulations could result in costly government investigations, government sanctions, including substantial monetary penalties, civil or criminal penalties, denial of export privileges, debarment from government contracts, and a loss of revenues and reputational harm.
Our manufacturing facilities in the U.S. and Germany provide finished products to China, our largest market. Should the United States or the European Union implement targeted or broad-based Trade Controls, our production and/or deliveries as well as results of operations and/or financial condition could be affected.
In addition, Trade Controls and their implementation are fluid and may change due to diplomatic and political considerations outside of our control. While the Company has a trade compliance program, there is a risk that IPG may not be able to comply due to the number, complexity and fast-changing nature of sanctions. Trade Controls and other governmental responses to political escalations may require us to take certain actions, including increasing costs and abandoning operations or writing-down asset values, or respond to nationalization or expropriation of assets abroad, adversely affect prevailing market prices of our common stock, have a reputational impact, or otherwise have a material adverse impact on us, our business and financial results.
We may experience lower than expected manufacturing yields, which would adversely affect our gross margins.
The manufacture of semiconductor diodes and the packaging of them is a highly complex process. Manufacturers often encounter difficulties in achieving acceptable product yields from diode and packaging operations. We have from time to time experienced lower than anticipated manufacturing yields for our diodes and packaged diodes. This occurs during the production of new designs and the installation and start-up of new process technologies and new equipment. If we do not achieve planned yields, our product costs could increase resulting in lower gross margins, and key component availability would decrease.
We are highly dependent on the significant experience and specialized expertise of our senior management and scientific staff. The unavailability or loss of one or more of these key employees or our failure to attract other highly skilled personnel necessary to compete successfully could harm our business and results of operations.
Our future success is substantially dependent on the continued service and performance of our executive officers. Although the board engages in executive succession planning, our inability to effectively and immediately transition knowledge or responsibilities to successors in the event of an unexpected absence or departure could harm our business and disrupt our operations. We also rely on our highly trained team of scientists, many of whom have numerous years of experience and specialized expertise in optical fibers, semiconductors and optical component technology, and other key engineering, sales, marketing, manufacturing and support personnel, any of whom may depart for a variety of reasons, which could harm our business. Competition for qualified personnel in our industry is intense, particularly for physicists, software engineers and other technical staff. If we fail to attract, integrate and retain the necessary personnel, it could delay the development or introduction of new products, negatively impact our ability to market, sell or support our products, and significantly harm our business.
Risks Relating to Intellectual Property, Litigation, Information Systems and Regulations
We are subject to litigation alleging that we infringe third-party intellectual property rights. Intellectual property claims could result in costly litigation and harm our business.
There has been significant litigation involving intellectual property rights in many technology-based industries, including our own. We face risks and uncertainties in connection with such litigation, including the risk that patents issued to others may harm our ability to do business; that there could be existing patents of which we are unaware that could be pertinent to our business; and that it is not possible for us to know whether there are patent applications pending that our products might infringe upon. Moreover, the frequency with which new patents are granted and the diversity of jurisdictions in which they are granted make it impractical and expensive for us to monitor all patents that may be relevant to our business.
From time to time, we have been notified of allegations and claims that we may be infringing patents or intellectual property rights owned by third parties. We have defended against several patent infringement claims in the past and we engage in patent office opposition proceedings internationally for patents owned by others.
In December 2024, affiliates of Trumpf SE & Co. KG filed two different patent lawsuits in two different Unified Patent Courts ("UPC") located in Germany against IPG Laser GmbH & Co. KG, our German subsidiary, alleging infringement of two patents granted by the European Patent Office by our adjustable mode beam lasers. These lasers are used in certain welding and
19
Table of Contents
cutting applications. The patents asserted cover Germany, where we manufacture lasers, and other large countries in Europe. Hearings were held in January 2026 and we await the decisions of the two UPC panels on February 24 and March 16, 2026. There can be no assurance that the outcome of either case will be favorable to the Company, and an adverse finding that the Company infringed one or more of the patents‐in‐suit could have a material adverse effect on the Company and its business. The patents also have counterparts in the U.S., China and elsewhere, and there can be no assurance that Trumpf will not assert such patents in other jurisdictions.
There can be no assurance that we will be able to resolve any claims or other allegations made or asserted against us without them having a material impact on our results of operations. Even if we ultimately are successful on the merits of any such litigation or re-examination, legal and administrative proceedings related to intellectual property are typically expensive and time-consuming, generate negative publicity and divert financial and managerial resources. Some litigants may have greater financial resources than we have and may be able to sustain the costs of complex intellectual property litigation more easily than we can. The UPC, in which we currently have two pending litigations, is a relatively new patent court in Europe, and its procedures, jurisprudence and available remedies continue to evolve, creating additional uncertainty regarding patent interpretation, the application of prior European patent precedents, and the timing, scope, and outcome of proceedings.
If we do not prevail in any intellectual property litigation brought against us, it could affect our ability to sell our products and materially harm our business, financial condition and results of operations. These developments could adversely affect our ability to compete for customers and increase our revenues, or could decrease our revenues or profits or increase our costs. Plaintiffs in intellectual property cases often seek, and sometimes obtain, injunctive relief. Intellectual property litigation commenced against us, including the Trumpf litigation, could force us to take actions that could be harmful to our business, including the following:
•stop selling our products or using the technology that contains the allegedly infringing intellectual property;
•pay actual monetary damages, royalties, lost profits or increased damages and the plaintiff's attorneys' fees; and
•attempt to license the relevant intellectual property which may not be available on reasonable terms.
Further, we could incur increased engineering, qualification, logistics and customer transition costs in connection with patent litigation outcomes or risk mitigation. Even if sales are not enjoined by a court, customer uncertainty could delay orders, pressure pricing, or affect design‐wins, and mitigation measures may be costly, time‐consuming and not fully effective.
In addition, intellectual property lawsuits can be brought by third parties against OEMs and end users that incorporate our products into their systems or processes. In some cases, we indemnify OEMs against third-party infringement claims relating to our products and we often make representations affirming, among other things, that our products do not infringe the intellectual property rights of others. As a result, we may incur liabilities in connection with lawsuits against our customers. Any such lawsuits, whether or not they have merit, could be time-consuming to defend, damage our reputation or result in substantial and unanticipated costs. Adverse judgments and court remedies in the Trumpf litigation or similar proceedings could also increase indemnification claims from OEM customers or prompt follow‐on assertions by other patent holders.
Our inability to protect our intellectual property and proprietary technologies could result in the unauthorized use of our technologies by third parties, hurt our competitive position and adversely affect our operating results.
We rely on patents, trade secret laws, contractual agreements, technical know-how and other unpatented proprietary information to protect our products, product development and manufacturing activities from unauthorized copying by third parties. Our patents do not cover all of our technologies, systems, products and product components and may not prevent third parties from unauthorized copying of our technologies, products and product components. We have significant international operations and are subject to foreign laws which differ in many respects from U.S. laws. Policing unauthorized use of our trade secret technologies throughout the world and proving misappropriation of our technologies are particularly difficult, especially due to the number of our employees and operations in numerous foreign countries. The steps that we take to acquire ownership of our employees' inventions and trade secrets in foreign countries may not have been effective under all such local laws, which could expose us to potential claims or the inability to protect intellectual property developed by our employees. Furthermore, any changes in, or unexpected interpretations of, the trade secret and other intellectual property laws in any country in which we operate may adversely affect our ability to enforce our trade secret and intellectual property positions. Costly and time-consuming litigation could be necessary to determine the scope of our confidential information and trade secret protection. However, there can be no assurance that confidentiality agreements we enter into with consultants, suppliers, employees and others will not be breached, that we will be able to effectively enforce them or that we will have adequate remedies for any breach.
Given our reliance on trade secret laws, others may independently develop similar or alternative technologies or duplicate our technologies and commercialize discoveries that we have made. Therefore, our intellectual property efforts may be
20
Table of Contents
insufficient to maintain our competitive advantage or to stop other parties from commercializing similar products or technologies. Many countries outside of the United States afford little or no protection to trade secrets and other intellectual property rights. Intellectual property litigation can be time-consuming and expensive, and there is no guarantee that we will have the resources to fully enforce our rights. If we are unable to prevent misappropriation or infringement of our intellectual property rights, or the independent development or design of similar technologies, our competitive position and operating results could suffer.
Our information systems are subject to cyber-attacks, interruptions and failures. If unauthorized access is obtained to our information systems, we may incur significant legal and financial exposure and liabilities.
Like many multinational corporations, we maintain several information technology systems, including software products licensed from third parties. These systems vary from country to country. Any system, network or internet failures, misuse by system users, the hacking into or disruption caused by the unauthorized access by third parties or loss of license rights could disrupt our ability to timely and accurately manufacture and ship products or to report our financial information in compliance with the timelines mandated by the SEC. Any such failure, misuse, hacking, disruptions or loss would likely cause a diversion of management's attention from the underlying business and could harm our operations. In addition, a significant failure of our various information technology systems could adversely affect our ability to complete an evaluation of our internal controls and attestation activities pursuant to Section 404 of the Sarbanes-Oxley Act of 2002 under the updated framework issued in 2013.
As part of our day-to-day business, we store our data and certain data about our customers, employees and service providers in our information technology system. While our system is designed with access security, if a third party gains unauthorized access to our data or technology, including information regarding our customers, employees and service providers, such security breach could expose us to a risk of loss of this information, loss of business, litigation and possible liability. Our security measures may be breached as a result of third-party action, including intentional misconduct by computer hackers, employee error, malfeasance or otherwise. Additionally, third parties may attempt to fraudulently induce employees or customers into disclosing sensitive information such as usernames, passwords or other information in order to gain access to our customers' data or our data, including our intellectual property and other confidential business information, employee information or our information technology systems. Because the techniques used to obtain unauthorized access, or to sabotage systems, change frequently and generally are not recognized until launched against a target, we may be unable to anticipate or detect these techniques or to implement adequate preventative measures. Any unauthorized access could negatively impact our customers' products, result in a loss of confidence by our customers, damage our reputation, disrupt our business, result in a misappropriation of our assets (including cash), lead to legal liability and negatively impact our future sales. Additionally, such actions could result in significant costs associated with loss of our intellectual property, impairment of our ability to conduct our operations, rebuilding our network and systems, prosecuting and defending litigation, responding to regulatory inquiries or actions, paying damages or taking other remedial steps. In addition, we may incur significant costs designed to prevent or mitigate the damage related to cybersecurity incidents. For instance, we may retain additional employees or consultants, implement new policies and procedures, and install information technology to detect and prevent identity theft, data breaches, or system disruptions. We would incur any such costs with the intent that proactively preventing a cybersecurity incident ultimately helps to mitigate potential cybersecurity liability. As previously disclosed, on September 14, 2020, the Company detected a ransomware attack impacting certain of our operational and information technology systems that we do not believe had a material impact on the Company's business, operations or financial condition.
The costs to address the foregoing security problems and security vulnerabilities before or after a cyber-incident could be significant. Our remediation efforts may not be successful and could result in interruptions, delays, a cessation of service, and a loss of existing or potential customers, impeding our sales, manufacturing, distribution, and other critical functions.
We may face particular privacy, data security and data protection risks due to laws and regulations regulating the protection or security of personal and other sensitive data.
We may face particular privacy, data security and data protection risks due to laws and regulations regulating the protection or security of personal and other sensitive data,including in particular several laws and regulations that have recently been enacted or adopted or are likely to be enacted or adopted in the future. For instance, in 2018, the European General Data Protection Regulation (“GDPR”) imposed additional obligations and risk upon our business and substantially increased the penalties to which we could be subject in the event of any non-compliance. GDPR requires companies to satisfy requirements regarding the handling of personal data (generally, of EU residents), including its use, protection and the rights of affected persons regarding their data. Failure to comply with GDPR requirements could result in penalties of up to 4% of worldwide revenue. In addition, several other jurisdictions around the world have recently enacted privacy laws or regulations similar to GDPR. For instance, in 2020, California enacted the California Consumer Privacy Act (“CCPA”), giving consumers many of the same rights as those available under GDPR. Several laws similar to the CCPA have been approved in the United States at
21
Table of Contents
the state level and more are being proposed at the federal and state levels. GDPR and other similar laws and regulations, as well as any associated inquiries or investigations or any other government actions, may be costly to comply with, result in negative publicity, increase our operating costs, require significant management time and attention, and subject us to remedies that may harm our business. We are evaluating these requirements and taking measures to ensure compliance with all applicable privacy and data protection-related laws and regulations. Because there is limited interpretation and enforcement of many of these laws and regulations, some measures initially might not satisfy standard or best practices that will be established in the coming years.
Changes in tax rates, tax liabilities or tax accounting rules could affect future results.
As a global company, we are subject to taxation in the United States and various other countries and jurisdictions. Significant judgment is required to determine worldwide tax liabilities, particularly related to intercompany pricing we apply to products shipped between various tax jurisdictions, commonly referred to as transfer pricing. Our future tax rates could be affected by changes in the composition of earnings in countries or states with differing tax rates, transfer pricing rules, changes in the valuation of our deferred tax assets and liabilities, or changes in the tax laws. In addition, we are subject to regular examination of our income tax returns by the Internal Revenue Service ("IRS") and other tax authorities. From time to time the United States, foreign and state governments make substantive changes to tax rules and the application of rules to companies, including various announcements from the United States government potentially impacting our ability to defer taxes on international earnings. We regularly assess the likelihood of favorable or unfavorable outcomes resulting from these examinations to determine the adequacy of our provision for income taxes. Although we believe our tax estimates are reasonable, there can be no assurance that any final determination will not be materially different than the treatment reflected in our historical income tax provisions and accruals, which could materially and adversely affect our operating results and financial condition.
If we or our third-party vendors fail to comply with FDA regulations or similar legal requirements in foreign jurisdictions relating to the design, manufacture, labeling, marketing, distribution or post-market surveillance of our products or any component part, we may be subject to fines, injunctions, product recalls, penalties or other enforcement actions, and our ability to commercially distribute and sell our products may be negatively impacted.
We design, manufacture and commercialize fiber laser systems and related accessories for specific medical applications. Through IPG Medical Corporation, we are the legal manufacturer of certain of these products and hold FDA clearances for their marketing and sale in the United States. As the legal manufacturer, we are responsible for regulatory obligations across the product lifecycle, including establishment registration and device listing, compliance with applicable pre- and post-market requirements, submission of medical device reports for certain malfunctions and adverse events, and initiating corrections or recalls where necessary. We have distribution partners that market and distribute certain of these products on our behalf. We also continue to sell our commercial fiber and diode laser modules, subassemblies and systems to OEMs that incorporate them into their medical products. As a medical device manufacturer, we and certain of our facilities, as well as critical suppliers, are required to comply with the FDA’s Quality System Regulation and those of other countries (“QSR”), which sets forth minimum standards for the procedures, execution and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage, and shipping of the products we sell in the medical industry, and related regulations, including Medical Device Reporting (“MDR”) requirements regarding the reporting of certain malfunctions and adverse events potentially associated with our products. The FDA and other regulatory agencies may evaluate our compliance with the QSR, MDR and other regulations, among other ways, through periodic announced or unannounced inspections which could disrupt our operations and interrupt our manufacturing and sales. If in conducting an inspection of our manufacturing facilities, or the manufacturing facilities of any of our third-party component manufacturers or critical suppliers, an investigator from the FDA or another regulatory agency observes conditions or practices believed to violate the QSR, MDR or other applicable regulatory requirements, the investigator may document their observations on a Form FDA 483 which may be issued at the conclusion of the inspection. A manufacturer that receives an FDA 483 may respond in writing and explain or describe any corrective actions taken or planned to address the inspectional observations. The FDA will typically review the facility’s written response and may re-inspect or otherwise follow-up to determine the facility’s compliance with the QSR, MDR and other applicable regulatory requirements. Failure to take adequate and timely corrective actions to remedy objectionable conditions listed on an FDA 483 could result in the FDA taking administrative or enforcement actions. Among these may be the FDA’s issuance of a Warning Letter to a manufacturer, which informs it that the FDA considers the observed violations to be of “regulatory significance” that, if not corrected, could result in further enforcement action. On November 4, 2025, the FDA issued an inspectional observation on Form FDA 483 at the conclusion of an on-site Electronic Product Radiation Control inspection at IPG Medical Corporation (“IPGM”). IPGM submitted a written response to the FDA on November 14, 2025 addressing the inspectional observation. A FDA Form 483 is not a final agency determination. IPGM has received no further communication from the FDA regarding this matter, and there is no specific date or deadline by which the FDA is required to respond or make a determination. We cannot predict the timing or outcome of the FDA’s review, and there can be no assurance that the matter
22
Table of Contents
will be resolved without additional inquiry, corrective actions, or enforcement measures that could adversely affect our business.
FDA enforcement actions, which include the FDA's issuance of a Warning Letter, seizure, injunction, criminal prosecution, and civil penalties, could result in total or partial suspension of a facility’s production and/or distribution, product recalls, fines, suspension or delay of the FDA’s review of product applications, and/or the FDA’s issuance of adverse publicity. Thus, an adverse inspection could force a shutdown of our manufacturing operations for products servicing the medical industry or a recall of such products. Enforcement actions could also delay FDA clearance or approval of our products for use in the medical industry.
Failure to maintain effective internal controls may cause a loss of investor confidence in the reliability of our financial statements or to cause us to delay filing our periodic reports with the SEC and adversely affect our stock price.
The SEC, as directed by Section 404 of the Sarbanes-Oxley Act of 2002, adopted rules requiring public companies to include a report of management on internal control over financial reporting in their annual reports on Form 10-K that contain an assessment by management of the effectiveness of our internal control over financial reporting. In addition, our independent registered public accounting firm must attest to and report on the effectiveness of our internal control over financial reporting. We have extensive and complex international manufacturing and sales and service locations which may make us more vulnerable to weaknesses in our internal controls. Although we test our internal control over financial reporting in order to ensure compliance with the Section 404 requirements, our failure to maintain adequate internal controls over financial reporting could result in an adverse reaction in the financial marketplace due to a loss of investor confidence in the reliability of our financial statements or a delay in our ability to timely file our periodic reports with the SEC, which ultimately could negatively impact our stock price.
Our products could contain defects, which may reduce sales of those products, harm market acceptance of our fiber laser and other products or result in claims against us.
The manufacture of our products involves highly complex and precise processes. Despite testing by us and our customers, errors have been found, and may be found in the future, in our products. These defects may cause us to incur significant warranty, support and repair costs, incur additional costs related to a recall, divert the attention of our engineering personnel from our product development efforts and harm our relationships with our customers. These problems could result in, among other things, loss of revenues or a delay in revenue recognition, loss of market share, harm to our reputation or a delay or loss of market acceptance of our fiber laser products. Additionally, a recall, particularly in our products used or incorporated in medical devices, could result in significant costs and lost sales and customers, enforcement actions and/or investigations by state and federal governments or other enforcement bodies, as well as negative publicity and damage to our reputation that could reduce future demand for our products. The development and sale of medical devices and component products involves an inherent risk of product liability claims. Defects, integration issues or other performance problems in our fiber laser and other products could also result in personal injury or financial or other damages to our customers, which in turn could damage market acceptance of our products and result in significant product liability claims being brought against us. A product liability claim brought against us, even if unsuccessful, could be time-consuming and costly to defend. If a product liability action were determined against us, it could result in significant damages, including punitive damages, and our consolidated financial position, results of operations or cash flows could be materially adversely affected.
We are subject to government regulations, including tariffs and duties that could restrict our international sales and negatively affect our business.
The United States, Germany, the European Union, China, Japan, South Korea and many other foreign governments impose tariffs and duties on the import of products, including some of those which we sell. In recent years, the U.S. instituted changes in trade policies that included the negotiation or termination of trade agreements, the imposition of higher tariffs on imports into the United States, including, in particular, on Russian and Chinese-made goods, economic sanctions on individuals, corporations or countries and other government regulations affecting trade between the United States and other countries where we conduct our business. On February 20, 2026, the U.S. Supreme Court rendered a decision invalidating tariffs imposed under the International Emergency Economic Powers Act. This decision introduces uncertainty regarding potential refund processes and future trade policy actions.
Policy changes and proposals could require time-consuming and expensive alterations to our business operations and may result in greater restrictions and economic uncertainty and disincentives on international trade, which could negatively impact our competitiveness in jurisdictions around the world as well as lead to an increase in costs in our supply chain. We are a multinational corporation, with manufacturing located both in the United States and internationally and with approximately
23
Table of Contents
74% of our net sales arising from foreign customers. As such, we may be more susceptible to negative impacts from these tariffs or change in trade policies than other less internationally focused enterprises. In addition, new tariffs and other changes in U.S. trade policy could trigger retaliatory actions by affected countries, and certain foreign governments, including the Chinese government (which has imposed retaliatory tariffs on a range of U.S. goods including certain optical and electronic products and components), may impose trade sanctions on certain U.S. manufactured goods. Such changes by the United States and other countries have the potential to adversely impact U.S. and worldwide economic conditions, our industry and the global demand for our products, and as a result, could negatively affect our business, financial condition and results of operations.
Our CROSSBOW counter‐UAS activities are subject to complex, rapidly evolving, and stringent U.S. regulatory, export control, aviation, and procurement requirements, and changes in these regimes or our failure to comply with them could adversely affect our ability to develop, test, demonstrate, sell, or deploy these systems.
In the United States, counter‐UAS systems operate within a highly regulated and rapidly evolving legal environment. The federal statutory and regulatory framework governing the development, use, sale and operation of counter‐UAS technologies continues to develop at a significant pace and is subject to change. We cannot predict the impact of future legal, regulatory, or policy changes by U.S. governmental entities relating to counter‐UAS technologies. New or amended laws, regulations, or policies could increase our compliance costs or restrict market opportunities for the testing, demonstration, sale, or use of counter‐UAS systems, including our CROSSBOW system. Our activities relating to CROSSBOW are also subject to stringent export control and government procurement requirements, including ITAR, EAR, and other domestic and international restrictions governing the classification, transfer, sale, end‐use, and end‐users of defense‐related technologies. Changes in these regulations, delays or difficulties in obtaining or maintaining required licenses or approvals, or adverse jurisdiction, classification, or end‐user determinations could restrict our ability to sell, deploy, or service CROSSBOW systems, particularly outside the United States. The development, testing and use of certain counter‐UAS laser systems in the United States may fall under the regulatory oversight of the Federal Aviation Administration (“FAA”) or other government agencies, depending on factors such as the operating environment and the nature of the customer. Although many of our potential U.S. government and defense customers operate pursuant to military or other federal authorizations outside the FAA’s civil regulatory framework, certain testing or demonstration activities may still require coordination with, or authorization from, the FAA and other agencies. Changes in applicable FAA or other governmental policies or requirements, or the inability to obtain or comply with any authorizations that may be required for particular testing or demonstration scenarios, or for the sale or deployment of CROSSBOW, could delay, limit, or prevent our ability to conduct such activities. Any of the foregoing regulatory developments, enforcement actions, or compliance challenges could restrict our ability to advance the CROSSBOW product line and limit its potential future contribution to our business.
We are subject to various environmental laws and regulations that could impose substantial costs upon us and may adversely affect our business, operating results and financial condition.
Some of our operations use substances regulated under various federal, state, local and international laws governing the environment, including those relating to the storage, use, discharge, disposal, product composition and labeling of, and human exposure to, hazardous and toxic materials. We could incur costs, fines and civil or criminal sanctions, third-party property damage or personal injury claims, or could be required to incur substantial investigation or remediation costs, if we were to violate or become liable under environmental laws. Compliance with current or future environmental laws and regulations could restrict our ability to expand our facilities or require us to acquire additional expensive equipment, modify our manufacturing processes, or incur other significant expenses in order to remain in compliance with such laws and regulations. There can be no assurance that violations of environmental laws or regulations will not occur in the future as a result of the lack of, or failure to obtain, permits, human error, accident, equipment failure or other causes.
Risks Relating to Our Common Stock
Certain trusts and a company created by the late founder of the Company collectively control over 35% of our voting power and have a significant influence on the outcome of director elections and other matters requiring stockholder approval, including a change in corporate control.
IP Fibre Devices (UK) Ltd. ("IPFD"), together with trusts created by the late founder of the Company, Dr. Valentin P. Gapontsev, beneficially own approximately 36% of our common stock. Dr. Scherbakov, our former CEO and current director, is the sole managing director of IPFD. Trustees of the trusts include an executive officer of the Company, a third-party corporate trustee, and Dr. Scherbakov. Dr. Scherbakov, as managing director of IPFD, and the other trustees have significant influence on the outcome of matters requiring stockholder approval, including election of our directors, stockholder proposals and approval of significant corporate transactions. IPFD and the trusts may vote their shares of our common stock in ways that other stockholders may consider would be adverse to the interests of the other stockholders. These significant ownership
24
Table of Contents
interests could delay, prevent or cause a change in control of the Company and might affect the market price of our common stock.
Future sales of our common stock by our existing shareholders could cause our stock price to decline.
Sales of a substantial number of shares of our common stock by our existing stockholders (including the trusts established by our late founder, Dr. Gapontsev, and IPFD) in the public market or the perception that these sales might occur, could depress the market price of our common stock and could impair our ability to raise capital through the sale of additional equity securities or other securities convertible into or exchangeable for equity securities, regardless of whether there is any relationship between such sales and the performance of our business.
Provisions in our charter documents and Delaware law, and our severance arrangements, could prevent or delay a change in control of our company, even if a change in control would be beneficial to our stockholders.
Provisions of our certificate of incorporation and by-laws, including certain provisions that will take effect when the founder of the Company, the late Dr. Valentin P. Gapontsev, together with his affiliates and associates, ceases to beneficially own an aggregate of 25% or more of our outstanding voting securities, may discourage, delay or prevent a merger, acquisition or change of control, even if it would be beneficial to our stockholders. The existence of these provisions could also limit the price that investors might be willing to pay in the future for shares of our common stock. These provisions include:
•authorizing the issuance of "blank check" preferred stock;
•establishing a classified board effective at the next annual meeting of stockholders after Dr. Gapontsev, together with his affiliates and associates, ceases to beneficially own an aggregate of 25% or more of our outstanding voting securities, and providing that directors thereon may only be removed for cause;
•providing that directors fill board vacancies;
•prohibiting stockholder action by written consent after Dr. Gapontsev, together with his affiliates and associates, ceases to beneficially own an aggregate of 25% or more of our outstanding voting securities;
•limiting the ability of stockholders to call a special meeting of stockholders;
•establishing advance notice requirements for nominations for election to the board of directors and for proposing matters to be submitted to a stockholder vote;
•supermajority stockholder approval to change certificate of incorporation and by-laws and
•lack of cumulative voting for director elections.
Section 203 of the Delaware General Corporation Law, which will apply to the Company following such time as the late Dr. Gapontsev, together with his affiliates and associates, ceases to beneficially own 25% or more of the total voting power of our outstanding shares, may prohibit business combinations with stockholders owning 15% or more of our outstanding voting stock. The terms of our employment agreements and severance plan with executives include change-of-control severance provisions which provide for the payment of cash following a termination of employment following a change of control. These provisions may discourage, delay or prevent a merger or acquisition, make a merger or acquisition costlier for a potential acquirer, or make removal of incumbent directors or officers more difficult.
General Risk Factors
We have experienced, and expect to experience in the future, fluctuations in our quarterly operating results. These fluctuations may increase the volatility of our stock price and may be difficult to predict.
We have experienced, and expect to continue to experience, fluctuations in our quarterly operating results. We believe that fluctuations in quarterly results may cause the market price of our common stock to fluctuate, perhaps substantially. Factors which may have an influence on our operating results in a particular quarter include those below and others included in the Risk Factors:
•the increase, decrease, cancellation or rescheduling of significant customer orders;
•the timing of revenue recognition based on the installation or acceptance of certain products shipped to our customers;
•the timing of customer qualification of our products and commencement of volume sales of systems that include our products;
25
Table of Contents
•the gain or loss of a key customer;
•product or customer mix;
•competitive pricing pressures and new market entrants;
•our ability to design, manufacture and introduce new products on a cost-effective and timely basis;
•our ability to manage our inventory levels and any provisions for excess or obsolete inventory;
•our ability to collect outstanding accounts receivable balances;
•incurring expenses to develop and improve application and support capabilities, the benefits of which may not be realized until future periods, if at all;
•incurring expenses related to impairment of values for goodwill, intangibles and other long-lived assets;
•different capital expenditure and budget cycles for our customers, which affect the timing of their spending;
•expenses associated with acquisition-related activities;
•regional epidemics or a global pandemic, such as COVID-19; and
•our ability to control expenses.
These factors make it difficult for us to accurately predict our operating results. In addition, our ability to accurately predict our operating results is complicated by the fact that many of our products have long sales cycles, some lasting as long as twelve months or more. Once a sale is made, our delivery schedule typically ranges from four weeks to four months, and therefore our sales will often reflect orders shipped in the same quarter that they are received and will not enhance our ability to predict our results for future quarters. In addition, long sales cycles may cause us to incur significant expenses without offsetting revenues since customers typically expend significant effort in evaluating, testing and qualifying our products before making a decision to purchase them. Moreover, customers may cancel or reschedule shipments, and production difficulties could delay shipments. Accordingly, our results of operations are subject to significant fluctuations from quarter to quarter, and we may not be able to accurately predict when these fluctuations will occur.
Our inability to manage risks associated with our international customers and operations could adversely affect our business.
We have significant facilities in and our products are sold in numerous countries. A substantial majority of our revenues are derived from customers outside the United States. In addition, we have substantial tangible assets outside of the United States. We anticipate that foreign sales will continue to account for a significant portion of our revenues in the foreseeable future. Our operations and sales in these markets are subject to risks inherent in international business activities, including the following and others mentioned in the Risk Factors:
•fluctuations in the values of foreign currencies;
•changes, including recession, and other general economic uncertainties affecting the macroeconomic and local economic communities in which we and our customers operate or serve;
•longer accounts receivable collection periods and less developed credit assessment and collection procedures;
•compliance with domestic and foreign laws and regulations, unexpected changes in those laws and regulatory requirements, including uncertainties regarding taxes including transfer pricing, tariffs, quotas, export controls, export licenses, trade sanctions and other trade barriers, and any corresponding retaliatory actions by affected countries, including China and Russia;
•certification requirements;
•less effective protection of intellectual property rights in some countries;
•potentially adverse tax and transfer pricing consequences;
•different capital expenditure and budget cycles for our customers, which affect the timing of their spending;
•political, legal and economic instability, foreign conflicts, labor unrest and the impact of regional and global infectious illnesses in the countries in which we and our customers, suppliers, manufacturers and subcontractors are located;
•preference for locally produced products;
•difficulties and costs of staffing and managing international operations across different geographic areas and cultures;
26
Table of Contents
•seasonal reductions in business activities;
•fluctuations in freight rates and transportation disruptions;
•investment restrictions or requirements;
•repatriation restrictions or requirements;
•export and import restrictions; and
•limitations on the ability of our employees to travel without restriction to certain countries in which we operate.
Political, economic and monetary instability and changes in governmental regulations or policies, including trade tariffs and protectionism, could adversely affect both our ability to effectively operate our foreign sales offices and the ability of our foreign suppliers to supply us with required materials or services. Any interruption or delay in the supply of our required components, products, materials or services, or our inability to obtain these components, materials, products or services from alternate sources at acceptable prices and within a reasonable amount of time, could impair our ability to meet scheduled product deliveries to our customers and could cause customers to cancel orders.
We are subject to risks of doing business in Belarus, where our Belarusian subsidiary historically provided mechanical parts to our German subsidiary and former Russian subsidiary, but does not currently provide parts to our current subsidiaries outside of Belarus. We are also subject to risks of doing business in China, as approximately 29% of our sales in 2025 were to Chinese customers. The results of our operations, business prospects and facilities in China and Belarus are subject to the economic and political environment there and global geopolitical conditions. The future economic direction of these emerging market countries remains largely dependent upon the effectiveness of economic, financial and monetary measures undertaken by the government, together with tax, legal, regulatory and political developments. Sanctions imposed by or on countries in which we have operations or do business has and could disrupt our supply of critical components, including among our manufacturing facilities in the U.S., Germany, Italy, Poland, and Belarus, and has caused us to shift all work occurring in Belarus to other countries. In addition, sanctions targeting the banking sector have and may impact the transfer of cash to and from countries in which we operate, including our ability to fund operations or repatriate surplus liquidity. At December 31, 2025, we had $1.5 million cash in Belarus. Such disruptions could negatively affect our ability to provide critical components to affiliates or produce finished goods for customers, which could increase our costs, require capital expenditures and harm our results of operations and financial condition. Further, Belarus adopted rules that impose conditions on sale of assets by U.S. and western companies that could decrease the value of assets, as well as limit payments to sellers. Our failure to manage the risks associated with our operations in China and Belarus and our other existing and potential future international business operations could have a material adverse effect upon our results of operations.
Foreign currency risk may negatively affect our net sales, cost of sales and operating margins and could result in exchange losses.
We conduct our business and incur costs in the local currency of most countries in which we operate. In 2025 our net sales outside the United States represented a substantial majority of our total sales. We incur currency transaction risk whenever one of our operating subsidiaries enters into either a purchase or a sales transaction using a different currency from the currency in which it operates or holds assets or liabilities in currencies different than their functional currency. Changes in exchange rates can also affect our results of operations when the value of sales and expenses of foreign subsidiaries are translated to U.S. dollars. We cannot accurately predict the impact of future exchange rate fluctuations on our results of operations. Further, given the volatility of exchange rates, we may not be able to effectively manage our currency risks, and any volatility in currency exchange rates may increase the price of our products in local currency to our foreign customers or increase the manufacturing cost of our products, which may have an adverse effect on our financial condition, cash flows and profitability. We incurred a foreign exchange loss of $9.4 million in 2025 and a loss of $5.5 million in 2024.
We pursue acquisitions and investments in new businesses, products, patents or technologies. These involve risks which could disrupt our business and may harm our financial results and condition.
We may make acquisitions of and investments in new businesses, products, patents and technologies and expand into new geographic areas, or we may acquire operations, products or technologies that expand our current capabilities. Although we have pursued relatively small acquisitions in the past, we may pursue larger transactions in the future. Acquisitions present a number of potential risks and challenges that could, if not met, disrupt our business operations, increase our operating costs, reduce consolidated margins, cause us to incur impairment charges and reduce the value of the acquired company, asset or technology to us. We may not be able to effectively integrate acquired businesses, business cultures, products, patents or technologies into our existing business and products, or retain key employees. As a result of the rapid pace of technological change in our industry, we may misjudge the long-term potential of an acquired business, product, patent or technology, or the
27
Table of Contents
acquisition may not be complementary to our existing business. Furthermore, potential acquisitions and investments, whether or not consummated, may divert our management's attention, require considerable cash outlays at the expense of our existing operations, incur unanticipated costs or liabilities, including the costs associated with improving the internal controls of the acquired company. In addition, to complete future acquisitions, we may issue equity securities, incur debt, assume contingent liabilities or have amortization expenses and write-downs of acquired assets, which could adversely affect our profitability and result in dilution to our existing and future stockholders.
We may incur impairments to goodwill or long-lived assets, which would negatively affect our results of operations.
We review our goodwill for impairment annually and other long-lived assets, including intangible assets identified in business combinations whenever events or changes in circumstances indicate that the carrying amount of these assets may not be recoverable. Negative industry or economic trends, including reduced estimates of future cash flows, disruptions to our business including those from government regulations, sanctions or tariffs, slower growth rates, lack of growth in our relevant business units or differences in the estimated product acceptance rates could lead to impairment charges against our long-lived assets, including goodwill and other intangible assets.
Our valuation methodology for assessing impairment requires management to make significant judgments and assumptions based on historical experience and to rely heavily on projections of future operating performance at many points during the analysis. Also, the process of evaluating the potential impairment of long-lived assets is subjective. We operate in a highly competitive environment and projections of future operating results and cash flows may vary significantly from actual results. Additionally, if our analysis indicates potential impairment to long-lived assets in one or more of our reporting units, we may be required to record additional charges to earnings in our financial statements, which could negatively affect our results of operations. In 2022, long-lived asset impairments related to our Russian operations were $79.0 million. In 2024, long-lived asset impairments related to our Belarusian operations were $26.6 million.
We are exposed to credit risk and fluctuations in the market values of our cash, cash equivalents and marketable securities.
Given the global nature of our business, we have both domestic and international investments. At December 31, 2025, 78% of our cash, cash equivalents and marketable securities were in the United States and 22% were outside the United States. Credit ratings and pricing of our investments can be negatively affected by liquidity, credit deterioration, prevailing interest rates, financial results, economic risk, political risk, sovereign risk or other factors. Also, our investments may be negatively affected by events that impact the banks or depositories that hold our investments. As a result, the value and liquidity of our cash, cash equivalents and marketable securities may fluctuate substantially. Therefore, although we have not realized any significant losses on our cash, cash equivalents and marketable securities, future fluctuations in their value could result in a significant realized loss.
Our ability to access financial markets to raise capital or finance a portion of our working capital requirements and support our liquidity needs may be adversely affected by factors beyond our control and could negatively impact our ability to finance our operations, meet certain obligations, implement our operating strategy or complete acquisitions.
We occasionally borrow under our existing credit facilities to fund operations, including working capital investments. Our major credit line expires in 2030. Uncertainty or disruptions in financial markets may negatively impact our ability to access additional financing or to refinance our existing credit facilities or existing debt arrangements on favorable terms or at all, which could negatively affect our ability to fund current and future expansion as well as future acquisitions and development. These disruptions may include turmoil in the financial services industry, unprecedented volatility in the markets where our outstanding securities trade, changes in reference rates for interest such as the discontinuation of LIBOR in 2023 and general economic downturns in the areas where we do business. If we are unable to access funds at competitive rates, or if our short-term or long-term borrowing costs increase, our ability to finance our operations, meet our short-term obligations and implement our operating strategy could be adversely affected. We also may in the future be required to raise capital through public or private financing or other arrangements. Such financing may not be available on acceptable terms, or at all, and our failure to raise capital when needed could harm our business.
Our short-term and long-term investment portfolios and certain cash balances could experience a decline in market value or otherwise become illiquid, which could materially and adversely affect our financial results.
As of December 31, 2025, we had approximately $404 million of cash and cash equivalents, $436 million in short-term investments and $77 million in long-term investments. See Note 3, "Fair Value Measurements" in the Notes to Consolidated
28
Table of Contents
Financial Statements in Part IV, Annual Report for further information about our cash equivalents, short-term investments and long-term investments. We currently do not use derivative financial instruments to adjust our investment portfolio risk or income profile. These investments, as well as any cash deposited in bank accounts, are subject to general credit, liquidity, market and interest rate risks, which may be exacerbated by unusual events, such as the U.S. debt ceiling crisis, which affected various sectors of the financial markets and led to global credit and liquidity issues. For example, in March 2023, certain US banks were closed and the Federal Deposit Insurance Corporation (FDIC) was appointed as receiver. While we were not directly impacted by these closures and did not have any deposits with these banks, there can be no assurance that our current or future banks will not face similar risks, and that we would be able to recover in full our deposits in the event of similar closures. We regularly maintain cash balances that are not insured or are in excess of the FDIC’s insurance limit. If the global financial markets continue to experience volatility or deteriorate, our investment portfolio and cash balances may be impacted and some or all of our investments may become illiquid or otherwise experience loss which could adversely impact our financial results and position.
29
Table of Contents
ITEM 1B. UNRESOLVED STAFF COMMENTS
None.
ITEM 1C. CYBERSECURITY
The Company understands the importance of preventing, assessing, identifying and managing material risks associated with cybersecurity threats.
Cyber Risk Management and Strategy
We have implemented a number of technical and organizational safeguards designed to manage our risks from cybersecurity threats and to protect against, detect and prepare to respond to cybersecurity incidents. These include employee training, incident response capability reviews and exercises, cybersecurity insurance and business continuity mechanisms. Additionally, we engage a third-party cybersecurity firm to assist with security features such as network and endpoint monitoring, cloud system monitoring and assessment of our incident response procedures.
Our incident response plan coordinates the activities that we and our third-party cybersecurity provider take to prepare, to respond and to recover from cybersecurity incidents. We have processes designed to triage, assess severity, investigate, escalate, contain and remediate an incident. We also have processes to comply with potentially applicable legal obligations and mitigate brand and reputational damage. As part of the above processes, we engage with consultants to review our cybersecurity program to help identify areas for continued focus, improvement, and compliance.
We have adopted cybersecurity control principles based on the National Institute of Standards and Technology Cybersecurity Framework (NIST), the Center for Internet Security (CIS) and ISO 27001. Further, our cybersecurity controls are designed to comply with applicable laws concerning protection of private information, including the EU General Data Protection Regulation (GDPR), Brazil’s Lei General de Proteção de Dados Pessoais (LGPD) and the California Consumer Privacy Act of 2018 (CCPA).
Our processes include assessing cybersecurity risks associated with our use of third-party service providers in the normal course of business, including those in our supply chain or who have access to our customer and employee data or our systems. Additionally, we assess cybersecurity considerations in the selection and oversight of our third-party service providers, including due diligence on the third parties that have access to our systems and facilities that house systems and data.
Governance Related to Cybersecurity Risks
The Company’s Global Director, Information Security (Security Director) directs the Company’s cybersecurity team. He reports to the Company’s Global Director of Information Technologies (IT Senior Director), who reports to the Senior Vice President, Global Operations. The Security Director is responsible for assessing and managing the Company’s cyber risk management program, informing senior management, as appropriate, regarding the prevention, detection, mitigation and remediation of cybersecurity incidents and supervising such efforts generally by the cybersecurity team.Our Security Director is a Certified Information Systems Security Professional (CISSP) and has over 20 years of experience in cybersecurity in a broad range of industries. Our IT Senior Director has a master’s degree in information systems and has prior experience managing global security efforts. Our Security Director manages a team of cybersecurity professionals with relevant experience and expertise, including in cybersecurity threat assessments and detection, mitigation technologies, cybersecurity training, incident response, cyber forensics, insider threats and regulatory compliance.
In addition, the Company’s IT Steering Committee (ITSC) considers, among other IT matters, risks relating to cybersecurity and applicable mitigation plans to address such risks. The ITSC is comprised of certain members of the Company’s senior management. The IT Senior Director and Security Director attend each ITSC meeting. The ITSC generally meets quarterly during the year with the IT Senior Director and Security Director to review risk mitigation activities as well as updated status of global security operations and metrics, including the prevention, detection, mitigation and remediation of cyber incidents. The IT Senior Director, Security Director and ITSC monitor the prevention, mitigation, detection and remediation of cybersecurity incidents through their management of, and participation in the cybersecurity risk management and strategy processes, including the operation of the Company’s incident response plan. The Company has an established process led by our Security Director governing our assessment, response and notifications internally and externally upon the occurrence of a cybersecurity incident.
Our Board of Directors (the "Board") is responsible for overseeing our enterprise risk management activities in general, and each of our Board committees assists the Board in the role of risk oversight.The full Board receives an update on the Company’s risks, risk management process and the risk trends related to cybersecurity at least annually, which includes a
30
Table of Contents
review of key performance indicators, recent threats and the Company’s management of such threats. The Audit Committee specifically assists the Board in its oversight of risks related to cybersecurity.The Security Director and IT Director brief the Audit Committee on information security and cybersecurity annually and as necessary in response to certain incidents.
Although risks from cybersecurity incidents and threats have to date not materially impacted us, our business strategy, results of operations or financial condition, we have from time to time and will continue to experience threats to and security incidents related to our and our third party vendors’ data and systems. For more information, please see “Item 1A, Risk Factors.”
ITEM 2. PROPERTIES
Our significant facilities at December 31, 2025 include the following:
Minsk, Belarus Owned 410,900 Manufacturing
Davenport, Iowa Owned 99,300 Systems integration, sales, administration
Our corporate headquarters is in Marlborough, Massachusetts. As of December 31, 2025, we occupied more than 2.8 million square feet of facilities worldwide. Of this we own 2.4 million square feet and lease 0.4 million square feet of building space, of which the majority is used for manufacturing. Our major manufacturing facilities are located in the United States and Germany. We have ceased new investments in our Belarusian operations. We have and will continue to expand our manufacturing operations in Germany and the United States, in part to replace the lost capacity at our factories in Russia and Belarus due to sanctions, to meet the demand for our products and our sales and support needs. We conduct our major research and development activities in Oxford and Marlborough, Massachusetts and Burbach, Germany.
We own additional facilities and land for various purposes, such as sales and support and applications labs. We believe the existing facilities are in good operating condition and are suitable for the conduct of our operations.
ITEM 3. LEGAL PROCEEDINGS
For a discussion of legal matters, please see Note 13 to our consolidated financial statements entitled “Commitments and Contingencies - Legal Proceedings,” which is incorporated by reference into this item.
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.
31
Table of Contents
PART II
ITEM 5. MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is quoted on the Nasdaq Global Select Market under the symbol "IPGP." As of February 20, 2026, there were 42,191,353 shares of our common stock outstanding held by 29 holders of record, which does not include beneficial owners of common stock whose shares are held in the names of various securities brokers, dealers and registered clearing agencies.
Stock Price Performance Graph
The following Stock Price Performance Graph and related information includes comparisons required by the SEC. The graph does not constitute "soliciting material" and should not be deemed "filed" or incorporated by reference into any other filings under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, except to the extent that we specifically incorporate this information by reference into such filing.
The following graph presents the cumulative shareholder returns for our Common Stock compared with the Russell 3000 Index and the S&P Composite 1500 - Electronic Equipment, Instruments & Components Index. We include the Russell 3000 Index because we became a member of this index in 2022. We include the S&P Composite 1500 - Electronic Equipment, Instruments & Components Index due to our being an index member, industry similarities and the fact that it contains several direct competitors.
The above graph represents and compares the value, through December 31, 2025, of a hypothetical investment of $100 made at the closing price on December 31, 2020 in each of (i) our common stock, (ii) Russell 3000 Index, and (iii) the S&P Composite 1500 - Electronic Equipment, Instruments & Components Index, in each case assuming the reinvestment of dividends. The stock price performance shown in this graph is not necessarily indicative of, and not is intended to suggest, future stock price performance.
Base Period 5-Year Cumulative Total Return
32
Table of Contents
Dividends
We do not anticipate paying cash dividends in the foreseeable future. Any future determination related to our dividend policy will be made at the discretion of our Board, taking into account any contractual and legal restrictions on our payment of dividends.
Recent Sales of Unregistered Securities; Use of Proceeds from Registered Securities
None.
Issuer Purchases of Equity Securities
The following table shows repurchases of our common stock in the fiscal quarter ended December 31, 2025: