UNITED
STATES
SECURITIES
AND EXCHANGE COMMISSION
Washington,
D.C. 20549
FORM
10-K
☒ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For
the fiscal year ended December 31, 2024
☐TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For
the transition period from ________ to _________
Commission
File Number: 001-41452
GREENWAVE
TECHNOLOGY SOLUTIONS, INC.
(Exact
name of registrant as specified in its charter)
(Address of principal executive offices) (Zip code)
(800)490-5020
(Registrant’s
telephone number, including area code)
Securities
registered pursuant to Section 12(b) of the Act: None
Securities
registered pursuant to Section 12(g) of the Act:
Title of each class Trading Symbol(s) Name of each exchange on which registered
Common Stock, par value $0.001 GWAV The Nasdaq Stock Market, LLC
Indicate
by check mark whether the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒
Indicate
by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒
Indicate
by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange
Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2)
has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐
Indicate
by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule
405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant
was required to submit such files). Yes ☒ No ☐
Indicate
by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting
company, or an emerging growth company. See definition of “large accelerated filer,” “accelerated filer,” “smaller
reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
Emerging Growth Company ☐
If
an emerging growth company, indicate by check mark if the Registrant has elected not to use the extended transition period for complying
with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate
by check mark whether the Registrant has filed a report on and attestation to its management’s assessment of the effectiveness
of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered
public accounting firm that prepared or issued its audit report. ☐
If
securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant
included in the fi ling reflect the correction of an error to previously issued financial statements. ☐
Indicate
by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation
received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐
Indicate
by check mark whether the Registrant is a shell company (as defined by Rule 12b-2 of the Exchange Act) Yes ☐ No ☒
The
aggregate market value of voting and non-voting common equity held by non-affiliates of the Registrant was $19,426,520 as of June 28,
2024, the last business day of the Registrant’s most recently completed second fiscal quarter.
The
number of shares of Registrant’s common stock outstanding was 57,169,509 as of April 11, 2025.
DOCUMENTS
INCORPORATED BY REFERENCE
Portions
of the Company’s Proxy Statement to be filed with the Securities and Exchange Commission within 120 days after the year covered
by this Annual Report on Form 10-K with respect to our 2025 Annual Meeting of Stockholders are incorporated by reference into Part III
of this report.
GREENWAVE
TECHNOLOGY SOLUTIONS, INC.
FORM 10-K ANNUAL REPORT
FOR THE FISCAL YEAR ENDED
DECEMBER 31, 2024
TABLE OF CONTENTS
Page
PART I 1
Item 1. Business 1
Item 1A. Risk Factors 7
Item 1B. Unresolved Staff Comments 20
Item 1C. Cybersecurity 20
Item 2. Properties 21
Item 3. Legal Proceedings 22
Item 4. Mine Safety Disclosures 22
Item 6. Reserved 23
Item 7A. Quantitative and Qualitative Disclosures About Market Risk 30
Item 8. Financial Statements and Supplementary Data 30
Item 9A. Controls and Procedures 30
Item 9B. Other Information 32
Item 9C. Disclosure Regarding Foreign Jurisdictions That Prevent Inspections 32
PART III 32
Item 10. Directors, Executive Officers and Corporate Governance 32
Item 11. Executive Compensation 32
Item 14. Principal Accountant Fees and Services 32
Item 15. Exhibits and Financial Statement Schedules 33
I
SPECIAL
NOTE REGARDING FORWARD-LOOKING STATEMENTS
Statements
in this Annual Report on Form 10-K (“Annual Report”) may be “forward-looking statements” within the meaning of
Section 27A of the Securities Act of 1933, as amended (the “Securities Act”) and Section 21E of the Securities Exchange Act
of 1934, as amended (the “Exchange Act”).
Forward-looking
statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or
any other statements relating to our future activities or other future events or conditions. These statements are often, but not always,
made through the use of words or phrases such as “believe,” “will,” “may,” “could,” “continue,”
“should,” “contemplate,” “expect,” “anticipate,” “estimate,” “intend,”
“target,” “forecast,” “outlook,” “guidance,” “project,” “potential,”
“plan” and “would,” and similar expressions that convey uncertainty of future events or outcomes are intended
to identify forward-looking statements. These statements are based on current expectations, estimates and projections about our business
based in part on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties
and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and are likely to, differ materially from
what is expressed or forecasted in the forward-looking statements due to numerous factors, including those set forth in “Item 1A.
Risk Factors” and elsewhere in this Annual Report on Form 10-K.
You
are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report
on Form 10-K. Any forward-looking statements speak only as of the date on which they are made, and we disclaim any obligation to publicly
update or release any revisions to these forward-looking statements, whether as a result of new information, future events or otherwise,
after the date of this Annual Report on Form 10-K or to reflect the occurrence of unanticipated events, except as required by law.
You
should read this Annual Report with the understanding that our actual future results, levels of activity, performance, and events and
circumstances may be materially different from what we expect.
PART
I
On
October 19, 2021, we changed our corporate name from MassRoots, Inc. to Greenwave Technology Solutions, Inc. We will not distinguish
between our prior and current corporate name and will refer to our current corporate name throughout this Annual Report on Form 10-K.
As such, unless expressly indicated or the content indicates otherwise, as used in this Annual Report on Form 10-K, the terms “Registrant,”
“Company,” “Greenwave,” “we,” “us,” and “our” refers to Greenwave Technology
Solutions, Inc., a Delaware corporation, and its subsidiaries taken as a whole, unless otherwise noted.
This
Annual Report contains additional trade names, trademarks, and service marks of other companies, which are the property of their respective
owners. We do not intend our use or display of other companies’ trade names, trademarks, or service marks to imply a relationship
with, or endorsement or sponsorship of us by, these other companies.
ITEM
1. BUSINESS
Overview
We
were formed on April 26, 2013 as a technology platform developer under the name MassRoots, Inc. In October 2021, we changed our corporate
name from “MassRoots, Inc.” to “Greenwave Technology Solutions, Inc.” On September 30, 2021, we closed our acquisition
of Empire Services, Inc. (“Empire”), which operates 13 metal recycling facilities in Virginia, North Carolina, and Ohio.
The acquisition was effective October 1, 2021 upon the effectiveness of the Certificate of Merger in Virginia.
Upon
the acquisition of Empire, we transitioned into the scrap metal industry which involves collecting, classifying and processing appliances,
construction material, end-of-life vehicles, boats, and industrial machinery. We process these items by crushing, shearing, shredding,
separating, and sorting, into smaller pieces and categorize these recycled ferrous, nonferrous, and mixed metal pieces based on density
and metal prior to sale. In cases of scrap cars, we remove the catalytic converters, aluminum wheels, and batteries for separate processing
and sale prior to shredding the vehicle. We have designed our systems to maximize the value of metals produced from this process.
We
operate two American Pulverizer 60x85 automotive shredders, one at our Kelford, North Carolina facility and a second at our Carrollton,
Virginia yard. Our shredders are designed to produce a denser product and, in concert with advanced separation equipment, more refined
recycled ferrous metals, which are more valuable as they require less processing to produce recycled steel products. In totality, this
process reduces large metal objects like auto bodies into baseball-sized pieces of shredded recycled metal.
The
shredded pieces are then placed on a conveyor belt under magnetized drums to separate the ferrous metal from the mixed nonferrous metal
and residue, producing consistent and high-quality ferrous scrap metal. The nonferrous metals and other materials then go through a number
of additional mechanical systems which separate the nonferrous metal from any residue. The remaining nonferrous metal is further processed
to sort the metal by type, grade, and quality prior to being sold as products, such as zorba (mainly aluminum), zurik (mainly stainless
steel), and shredded insulated wire (mainly copper and aluminum).
We
are headquartered in Chesapeake, Virginia and employ 180 people as of April 7, 2025.
Background
We
were incorporated in the state of Delaware on April 26, 2013 as a technology platform. Our principal executive office is located at 4016
Raintree Rd, Ste 300, Chesapeake, VA 23321, and our telephone number is (800) 490-5020.
Products
and Services
Our
main product is selling ferrous metal, which is used in the recycling and production of finished steel. It is categorized into heavy
melting steel, plate and structural, and shredded scrap, with various grades of each of those categorizations based on the content, size
and consistency of the metal. All of these attributes affect the metal’s value.
We
also process nonferrous metals such as aluminum, copper, stainless steel, nickel, brass, titanium, lead, alloys and mixed metal products.
Additionally, we sell the catalytic converters recovered from end-of-life vehicles to processors which extract the nonferrous precious
metals such as platinum, palladium and rhodium.
We
provide metal recycling services to a wide range of suppliers, including large corporations, industrial manufacturers, retail customers,
and government organizations.
Pricing
and Customers
Prices
for our ferrous and nonferrous products are based on prevailing market rates and are subject to market cycles, worldwide steel demand,
government regulations and policy, and supply of products that can be processed into recycled steel. Our main buyers adjust the prices
they pay for scrap metal products based on market rates usually on a monthly or bi-weekly basis. We are usually paid for the scrap metal
we deliver to customers within 14 days of delivery.
Based
on any price changes from our customers or our other buyers, we in turn adjust the price for unprocessed scrap we pay suppliers in order
to manage the impact on our operating income and cashflows.
The
spread we are able to realize between the sales prices and the cost of purchasing scrap metal is determined by a number of factors, including
transportation and processing costs. Historically, we have experienced sustained periods of stable or rising metal selling prices, which
allow us to manage or increase our operating income. When selling prices decline, we adjust the prices we pay customers to minimize the
impact to our operating income.
Sources
of Unprocessed Metal
Our
main sources of unprocessed metal we purchase are end-of-life vehicles, old equipment, appliances and other consumer goods, and scrap
metal from construction or manufacturing operations. We acquire this unprocessed metal from a wide base of suppliers including large
corporations, industrial manufacturers, retail customers, and government organizations who unload their metal at our facilities or we
pick it up and transport it from the supplier’s location. Currently, our operations and main suppliers are located in the Hampton
Roads and northeastern North Carolina markets, in addition to a facility in Cleveland, OH.
Our
supply of scrap metal is influenced by overall health of economic activity in the United States, changes in prices for recycled metal,
and, to a lesser extent, seasonal factors such as severe weather conditions, which may prohibit or inhibit scrap metal collection.
Technology
We
launched ScrapApp.com in September 2023 as a platform for buying end-of-life vehicles directly from individuals wishing to sell their
cars, rather than from third parties. As of March 27, 2025, Scrap App has facilitated the purchase of more than 1,200 vehicles from individuals,
primarily by Empire, its parent company. We believe Empire has generated positive cashflows from purchasing these vehicles. Scrap App
is currently available in 15 markets across Virginia, North Carolina, Ohio, Texas, Colorado, and Arizona, and South Carolina. Scrap App
has launched an AI agent in beta to quote cars, schedule pickups, and answer questions as it moves to automate its operations.
After
an exhaustive diligence process, Greenwave selected GreenSpark as its point of sale and enterprise resource planning platform in February
2025. The Company has invested significant time and resources into establishing a solid foundation and operating procedures utilizing
Greenspark and expects to roll it out across its 13 metal recycling facilities in Q2 2025. Greenwave’s adoption of GreenSpark positions
the Company alongside 500+ top-tier scrap yard locations already thriving on the platform. Serving the leading operators in metals recycling
and automotive industries, GreenSpark’s scalable ecosystem aligns perfectly with Greenwave’s aggressive growth plans.
Competition
We
compete with several large, well-financed recyclers of scrap metal, steel mills which own their own scrap metal processing operations,
and with smaller metal recycling companies. Demand for metal products is sensitive to global economic conditions, the relative value
of the U.S. dollar, and availability of material alternatives, including recycled metal substitutes. Prices for recycled metal are also
influenced by tariffs, quotas, and other import restrictions, and by licensing and government requirements.
Greenwave
believes the U.S. scrap metal industry is undergoing a fundamental transformation – the past few weeks have revealed that steel
producers/automakers have extreme exposure to tariffs and supply chain disruptions. Leading steel makers are moving decisively to lockdown
their supply chains to mitigate these fundamental risks – accelerating the already rapid consolidation of the U.S. scrap metal
market.
Toyota
announced it was acquiring Radius Recycling (f/k/a Schnitzer Steel) for $1.32 billion all-cash – a $757 million premium –
on March 13, 2025, despite massive loss and cash burned in operations. Until last week, Schnitzer was one of the largest independent
U.S. scrap metal companies — it appears Toyota did not base their valuation on Schnitzer’s current operations, but instead
on the value their supply of scrap metal would provide to Toyota’s manufacturing.
The
Company believes there are now fewer than 50 scrap yard chains with significant supply volume left in the U.S. –we believe Greenwave
is likely in the top 25 in the country, with an extensive footprint in a highly coveted market – Hampton Roads, VA.
Since
early February, domestic scrap steel prices are up 32% and demand is already far exceeding supply. These are the market conditions in
which Greenwave performs the best — and we’re moving quickly to expand our operations.
When
the dust settles, we expect the leading steel producers will likely own supply channels producing a significant portion of the raw material
required to operate – and there’s limited U.S. scrap metal chains remaining.
Recent
Developments
Registered
Direct Offering and Concurrent Private Placement
On
January 10, 2025, Greenwave and certain institutional and accredited investors (the “January Purchasers”) entered into a
securities purchase agreement (the “January Purchase Agreement”), pursuant to which the Company agreed to sell to such January
Purchasers an aggregate of 7,544,323 shares of the Company’s common stock, in a registered direct offering (the “January
Registered Direct Offering”), and accompanying warrants to purchase up to 7,544,323 shares of common stock (the “January
Warrants”) in a concurrent private placement (the “January Private Placement” and together with the Registered Direct
Offering, the “January Offering”), for gross proceeds of approximately $4 million, before deducting the placement agent’s
fees and other estimated offering expenses. The purchase price per share and the accompanying January Warrant to purchase one share of
common stock was $0.5302. The January Warrants will be exercisable upon the receipt of stockholder approval for the issuance of the January
Warrants and have an exercise price of $0.5302 per share. The January Warrants will expire five years from the date of stockholder approval.
At any time after the date that is 120 days following the closing of the January Offering, the January Warrants can be exercised on a
cashless basis if there is no effective registration statement registering, or no current prospectus available for, the resale of the
shares underlying the January Warrants.
Following
the later of receipt of approval of the Company’s stockholders and effectiveness of a registration statement registering the resale
of the shares underlying the January Warrants, the January Warrants may be redeemed by the Company if the price of the Company’s
common stock on Nasdaq is more than 200% of the exercise price of the January Warrants for 20 consecutive trading days and the Company
gives proper notice to the holders of such redemption. The January Purchase Agreement also prohibits each January Purchaser from conducting
any short sales while such January Purchaser owns any unexpired January Warrants.
Exchange
Offer
Concurrently
with the January Offering, on January 10, 2025, the Company entered into exchange agreements (collectively, the “Exchange Agreements”)
with holders (the “June Holders”) of certain warrants issued on or about June 12, 2024 to purchase the Company’s Common
Stock (the “June Warrants”) whereby the Company and the June Holders agreed to exchange the June Warrants for shares of common
stock equivalent to 96% of the shares of common stock issuable upon exercise of the June Warrants (the “Exchange”). Pursuant
to the Exchange, the Company issued 5,327,401 shares of common stock (the “Exchange Shares”) in exchange for the surrender
and termination of certain June Warrants to purchase up to 5,549,374 shares of common stock.
Warrants
Amendment
Concurrently
with the January Offering, on January 10, 2025, the Company and the holders (the “Existing Holders”) of certain warrants
issued on or about (a) March 18, 2024 (the “March Warrants”), (b) April 22, 2024 (the “April Warrants”), and
(c) May 16, 2024 (the “May Warrants” and together with the March Warrants and the April Warrants, the “Existing Warrants”),
agreed to amend the Existing Warrants (collectively, the “Warrant Amendment”). The Warrant Amendment amended the Existing
Warrants to (i) reduce the exercise price of the Existing Warrants from $2.91 to $1.50 per share, (ii) increase the number of shares
issuable upon exercise of the Existing Warrants by 250% (the “Quantity Adjustment”), and (iii) to remove certain adjustment
provisions in the Existing Warrants in the event of certain dilutive issuances or share combinations. Following the Warrant Amendment,
the Existing Warrants are exercisable for 11,346,743 shares of common stock. The shares of common stock issuable upon exercise of the
Existing Warrants pursuant to the Quantity Adjustment and the alternative cashless exercise provision pursuant to Section 2(c) of the
Existing Warrants are subject to stockholder approval.
Appointment
of Lisa Lucas-Burke to Board of Directors
On
January 28, 2025, the Company increased the number of directors comprising its Board of Directors (“Board”) from four to
five members and appointed Lisa Lucas-Burke as a member of the Board and as a member of the Audit Committee, Compensation Committee,
and Nomination and Corporate Governance Committee, effective immediately.
Registered
Direct Offering and Concurrent Private Placement
On
February 10, 2025, the Company and certain institutional and accredited investors (the “February Purchasers”) entered into
a securities purchase agreement (the “February Purchase Agreement”), pursuant to which the Company agreed to sell to such
February Purchasers an aggregate of 21,100,000 shares of common stock, in a registered direct offering (the “February Registered
Direct Offering”), and accompanying warrants to purchase up to 21,100,000 shares of common stock (the “February Warrants”)
in a concurrent private placement (the “February Private Placement” and together with the Registered Direct Offering, the
“February Offering”), for gross proceeds of approximately $7 million, before deducting the placement agent’s fees and
other estimated offering expenses. The purchase price per share and the accompanying February Warrant to purchase one share of common
stock was $0.3337. The February Warrants will be exercisable upon the receipt of stockholder approval for the issuance of the February
Warrants and have an exercise price of $0.3337 per share. The February Warrants will expire five years from the date of stockholder approval.
At any time after the date that is 120 days following the initial exercise date of the February Warrants, the February Warrants can be
exercised on a cashless basis if there is no effective registration statement registering, or no current prospectus available for, the
resale of the shares underlying the February Warrants.
Following
the later of receipt of approval of the Company’s stockholders and effectiveness of a registration statement registering the resale
of the shares underlying the February Warrants, the February Warrants may be redeemed by the Company if the price of the Company’s
common stock on Nasdaq is more than 200% of the exercise price of the February Warrants for 20 consecutive trading days and the Company
gives proper notice to the holders of such redemption. The February Purchase Agreement also prohibits each February Purchaser from: (a)
conducting any short sales while such February Purchaser owns any unexpired February Warrants and (b) selling any portion of the shares
prior to the earlier of (i) 8:00 p.m. on February 14, 2025, and (ii) the date on which the common stock is quoted at or above $0.50 per
share.
Henry
Sicignano III Resignation as Director
Effective
February 14, 2025, Henry Sicignano III, a Director of the Company, notified the Company that he will resign from the Board. Mr. Sicignano’s
resignation was not the result of a dispute or disagreement with the Company. Mr. Sicignano served as Chairman of the Company’s
Audit Committee and as a member of the Company’s Compensation Committee and Nominating and Corporate Governance Committee.
Nasdaq
Bid Price Deficiency
As
previously reported by the Company, on September 13, 2024, the Company received written notice (the “Notice”) from The Nasdaq
Listing Qualification Department (“Nasdaq”) notifying the Company that it was not in compliance with the $1.00 minimum bid
price requirement set forth in Nasdaq Listing Rule 5550(a)(2) for continued listing on the Nasdaq Capital Market (the “Minimum
Bid Price Requirement”), as the closing bid price of the Company’s common stock had been below $1.00 per share for 30 consecutive
business days. The Notice indicated that the Company has 180 calendar days, or until March 12, 2025, to regain compliance with the Minimum
Bid Price Requirement.
On
March 13, 2025, Nasdaq notified the Company that although the Company has not regained compliance with the Minimum Bid Price Requirement,
the Company is eligible to receive an additional 180 calendar day period or until September 8, 2025, to regain compliance with the Minimum
Bid Price Requirement, pursuant to Nasdaq Listing Rule 5810(a)(3)(A). If, at any time during this additional compliance period, the closing
bid price of the Company’s common stock is at least $1.00 per share for a minimum of 10 consecutive business days, Nasdaq will
provide written confirmation of compliance, and this matter will be closed. If compliance cannot be demonstrated by September 8, 2025,
Nasdaq will provide written notification that the Company’s securities will be delisted. At that time, the Company may appeal Nasdaq’s
determination to a Nasdaq Hearings Panel.
The
Company is currently monitoring the closing bid price of its common stock and will consider available options, including a reverse stock
split, if appropriate, to regain compliance with the Minimum Bid Price Requirement by September 8, 2025. There can be no assurance that
the Company will be able to regain compliance with the Minimum Bid Price Requirement, even if it maintains compliance with other listing
requirements of the Nasdaq Capital Market.
Intellectual
Property
None.
Employees
and Human Capital Resources
Greenwave
employs 180 people as of April 7, 2025.
We
view our diverse employee population and our culture as key to our success. Our company culture prioritizes learning, supports growth
and empowers us to reach new heights. We recruit employees with the skills and training relevant to succeed and thrive in their functional
responsibilities. We assess the likelihood that a particular candidate will contribute to the Company’s overall goals, and beyond
their specifically assigned tasks. Depending on the position, our recruitment reach can be local as well as national. We provide competitive
compensation and best in class benefits that are tailored specifically to the needs and requests of our employees. As appropriate, employees
are provided the option of working remotely or at our facilities with appropriate safeguards. We uphold our commitment to stockholders
by working hard and being thoughtful and deliberate in how we use resources.
Available
Information
We
file Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and other information with the Securities
and Exchange Commission (SEC). Our filings with the SEC are available free of charge on the SEC’s website at www.sec.gov
and on our website under the “Investors” tab as soon as reasonably practicable after we electronically file such material
with, or furnish it to, the SEC.
ITEM
1A. RISK FACTORS
An
investment in our securities involves a high degree of risk. This Annual Report on Form 10-K contains the risks applicable to an investment
in our securities. The risks and uncertainties we have described are not the only ones we face. Additional risks and uncertainties not
presently known to us or that we currently deem immaterial may also affect our operations. The occurrence of any of these known or unknown
risks might cause you to lose all or part of your investment in the offered securities.
Risk
Factors Summary
Risks
Relating to Our Business and Industry
● Climate change may adversely impact our facilities and our ongoing operations.
● We may need to obtain additional financing to fund our operations.
Risks
Relating to Government Laws and Regulations
● We may not realize our deferred tax assets in the future.
Risks
Relating to Intellectual Property
Risks
Related to our Common Stock
● You could lose some or all of your investment.
Risks
Relating to Our Business and Industry
We
operate in industries that are cyclical and sensitive to general economic conditions, which could have a material adverse effect on our
operating results, financial condition and cash flows.
Demand
for most of our products is cyclical in nature and sensitive to general economic conditions. The timing and magnitude of the cycles in
the industries in which our products are used, including global steel manufacturing and nonresidential and infrastructure construction
in the U.S., are difficult to predict. The cyclical nature of our operations tends to reflect and be amplified by changes in economic
conditions, both domestically and internationally, and foreign currency exchange fluctuations. Economic downturns or a prolonged period
of slow growth in the U.S. and foreign markets or any of the industries in which we operate could have a material adverse effect on our
results of operations, financial condition and cash flows.
Changing
conditions in global markets including the impact of sanctions and tariffs, quotas and other trade actions and import restrictions may
adversely affect our operating results, financial condition and cash flows.
A
significant portion of the metal we process is sold to end customers located outside the U.S., including countries in Asia, the Mediterranean
region and North, Central and South America. Our ability to sell our products profitably, or at all, is subject to a number of risks
including adverse impacts of political, economic, military, terrorist or major pandemic events; labor and social issues; legal and regulatory
requirements or limitations imposed by foreign governments including quotas, tariffs or other protectionist trade barriers, sanctions,
adverse tax law changes, nationalization, currency restrictions, or import restrictions for certain types of products we export; and
disruptions or delays in shipments caused by customs compliance or other actions of government agencies. The occurrence of such events
and conditions may adversely affect our operating results, financial condition and cash flows.
For
example, in fiscal 2017, regulators in China began implementing the National Sword Initiative involving inspections of Chinese industrial
enterprises, including recyclers, in order to identify rules violations with respect to discharge of pollutants or illegally transferred
scrap imports. Restrictions resulting from the National Sword Initiative include a ban on certain imported recycled products, lower contamination
limits for permitted recycled materials, and more comprehensive pre- and post-shipment inspection requirements. Disruptions in pre-inspection
certifications and stringent inspection procedures at certain Chinese destination ports have limited access to these destinations and
resulted in the renegotiation or cancellation of certain nonferrous customer contracts in connection with the redirection of such shipments
to alternate destinations. Commencing July 1, 2019, China imposed further restrictions in the form of import license requirements and
quotas on certain scrap products, including certain nonferrous products we sell. Chinese import licenses and quotas are issued to Chinese
scrap consumers on a quarterly basis for the importation of scrap products. Since the implementation of this program, the size of import
quotas has been steadily reduced on a quarter-over-quarter basis. We have continued to sell our recycled metal products into China; however,
additional or modified license requirements and quotas, as well as additional product quality requirements, may be issued in the future.
We believe that the potential impact on our recycling operations of the Chinese regulatory actions described above could include requirements
that would necessitate additional processing and packaging of certain nonferrous recycled scrap metal products, increased inspection
and certification activities with respect to exports to China, or a change in the use of our sales channels in the event of delays in
the issuance of licenses, restrictive quotas or an outright ban on certain or all of our recycled metals products by China. As regulatory
developments progress, we may need to make further investments in nonferrous processing equipment beyond existing planned investments
where economically justified, incur additional costs in order to comply with new inspection requirements, or seek alternative markets
for the impacted products, which may result in lower sales prices or higher costs and may adversely impact our business or results of
operations.
In
March 2018, the U.S. imposed a 25% tariff on certain imported steel products and a 10% tariff on certain imported aluminum products under
Section 232 of the Trade Expansion Act of 1962. In March 2025, the U.S. raised tariffs on all imported steel and aluminum products to
25% without exception or exclusion. These new tariffs, along with other U.S. trade actions, have triggered retaliatory actions by certain
affected countries, and other foreign governments have initiated or are considering imposing trade measures on other U.S. goods. For
example, China has imposed a series of retaliatory tariffs on certain U.S. products, including a 25% tariff on all grades of U.S. scrap
and an additional 25% on U.S. aluminum scrap. These tariffs and other trade actions could result in a decrease in international steel
demand beyond that already experienced and further negatively impact demand for our products, which would adversely impact our business.
Given the uncertainty regarding the scope and duration of these trade actions by the U.S. or other countries, the impact of the trade
actions on our operations or results remains uncertain, but this impact could be material.
Changes
in the availability or price of inputs such as raw materials and end-of-life vehicles could reduce our sales.
Our
businesses require certain materials that are sourced from third party suppliers. Industry supply conditions generally involve risks,
including the possibility of shortages of raw materials, increases in raw material and other input costs, and reduced control over delivery
schedules. We procure our scrap inventory from numerous sources. These suppliers generally are not bound by long-term contracts and have
no obligation to sell scrap metal to us. In periods of declining or lower scrap metal prices suppliers may elect to hold scrap metal
to wait for higher prices or intentionally slow their metal collection activities, tightening supply. If a substantial number of suppliers
cease selling scrap metal to us, we will be unable to recycle metal at desired levels, and our results of operations and financial condition
could be materially adversely affected. For instance, in the second quarter of fiscal 2020 a lower price environment for recycled metals
in combination with economic and other restrictions on suppliers relating to COVID-19 severely constricted the supply of scrap metal
including end-of-life vehicles, which resulted in significantly reduced processed volumes. A slowdown of industrial production in the
U.S. may also reduce the supply of industrial grades of metal to the metals recycling industry, resulting in less recyclable metal available
to process and market. Increased competition for domestic scrap metal, including as a result of overcapacity in the scrap recycling industry
in the U.S. and Canada, may also reduce the supply of scrap metal available to us. Failure to obtain a steady supply of scrap material
could both adversely impact our ability to meet sales commitments and reduce our operating margins. Failure to obtain an adequate supply
of end-of-life vehicles could adversely impact our ability to attract customers and charge admission fees and reduce our parts sales.
Failure to obtain raw materials and other inputs to steel production such as graphite electrodes, alloys and other required consumables,
could adversely impact our ability to make steel to the specifications of our customers.
Significant
decreases in scrap metal prices may adversely impact our operating results.
The
timing and magnitude of the cycles in the industries in which we operate are difficult to predict and are influenced by different economic
conditions in the domestic market, where we typically acquire our raw materials, and foreign markets, where we typically sell the majority
of our products. Purchase prices for scrap metal including end-of-life vehicles and selling prices for recycled scrap metal are subject
to market forces beyond our control. While we attempt to respond to changing recycled scrap metal selling prices through adjustments
to our metal purchase prices, our ability to do so is limited by competitive and other market factors. As a result, we may not be able
to reduce our metal purchase prices to fully offset a sharp reduction in recycled scrap metal sales prices, which may adversely impact
our operating income and cash flows. In addition, a rapid decrease in selling prices may compress our operating margins due to the impact
of average inventory cost accounting, which causes cost of goods sold recognized in the Consolidated Statements of Operations to decrease
at a slower rate than metal purchase prices.
Imbalances
in supply and demand conditions in the global steel industry may reduce demand for our products.
Economic
expansions and contractions in global economies can result in supply and demand imbalances in the global steel industry that can significantly
affect the price of commodities used and sold by our business, as well as the price of and demand for finished steel products. In a number
of foreign countries, such as China, steel producers are generally government-owned and may therefore make production decisions based
on political or other factors that do not reflect free market conditions. In the past, overcapacity and excess steel production in these
foreign countries resulted in the export of aggressively priced semi-finished and finished steel products. This led to disruptions in
steel-making operations within other countries, negatively impacting demand for our recycled scrap metal. Existing or new trade laws
and regulations may cause or be inadequate to prevent disadvantageous trade practices, which could have a material adverse effect on
our financial condition and results of operations. Although trade regulations restrict or impose duties on the importation of certain
products, if foreign steel production significantly exceeds consumption in those countries, global demand for our recycled scrap metal
products could decline and imports of steel products into the U.S. could increase, resulting in lower volumes and selling prices for
our recycled metal products and finished steel products.
Impairment
of long-lived assets and equity investments may adversely affect our operating results.
Our
long-lived asset groups are subject to an impairment assessment when certain triggering events or circumstances indicate that their carrying
value may be impaired. If the carrying value exceeds our estimate of future undiscounted cash flows of the operations related to the
asset group, an impairment is recorded for the difference between the carrying amount and the fair value of the asset group. The results
of these tests for potential impairment may be adversely affected by unfavorable market conditions, our financial performance trends,
or an increase in interest rates, among other factors. If, as a result of the impairment test, we determine that the fair value of any
of our long-lived asset groups is less than its carrying amount, we may incur an impairment charge that could have a material adverse
effect on our financial condition and results of operations.
Increases
in the value of the U.S. dollar relative to other currencies may reduce the demand for our products.
A
significant portion of our recycled scrap metal revenues is generated from sales to foreign customers, which are denominated in U.S.
dollars, including customers located in Asia, the Mediterranean region and North, Central and South America. A strengthening U.S. dollar,
as experienced during recent years including fiscal 2020, makes our products more expensive for non-U.S. customers, which may negatively
impact export sales. A strengthening U.S. dollar also makes imported metal products less expensive, which may result in an increase in
imports of steel products into the U.S. As a result, our finished steel products, which are made in the U.S., may become more expensive
for our U.S. customers relative to imported steel products thereby reducing demand for our products.
Equipment
upgrades, equipment failures and facility damage may lead to production curtailments or shutdowns.
Our
business operations and recycling and manufacturing processes depend on critical pieces of equipment, including information technology
equipment, shredders, nonferrous sorting technology, furnaces and a rolling mill, which may be out of service occasionally for scheduled
upgrades or maintenance or as a result of unanticipated failures. Our facilities are subject to equipment failures and the risk of catastrophic
loss due to unanticipated events such as fires, earthquakes, accidents or violent weather conditions. Interruptions in our processing
and production capabilities and shutdowns resulting from unanticipated events could have a material adverse effect on our financial condition,
results of operations and cash flows.
We
are subject to legal proceedings and legal compliance risks that may adversely impact our financial condition, results of operations
and liquidity.
We
spend substantial resources ensuring that we comply with domestic and foreign regulations, contractual obligations and other legal standards.
Notwithstanding this, we are subject to a variety of legal proceedings and compliance risks in respect of various matters, including
regulatory, safety, environmental, employment, transportation, intellectual property, contractual, import/export, international trade
and governmental matters that arise in the course of our business and in our industry. An outcome in an unusual or significant legal
proceeding or compliance investigation in excess of insurance recoveries could adversely affect our financial condition and results of
operations. For information regarding our current significant legal proceedings and contingencies, see “Legal Proceedings”
in Part I, Item 3 and “Contingencies – Other” within Note 11 – Commitments and Contingencies in the notes to
the financial statements.
Climate
change may adversely impact our facilities and our ongoing operations.
The
potential physical impacts of climate change on our operations are highly uncertain and depend upon the unique geographic and environmental
factors present, for example rising sea levels at deep water port facilities, changing storm patterns and intensities, and changing temperature
levels. As many of our recycling facilities are located near deep water ports, rising sea levels may disrupt our ability to receive scrap
metal, process the scrap metal through our shredders and ship products to our customers. Extreme weather events and conditions, such
as hurricanes, thunderstorms, tornadoes, wildfires and snow or ice storms, may increase our costs or cause damage to our facilities,
and any damage resulting from extreme weather may not be fully insured. Increased frequency and duration of adverse weather events and
conditions may also inhibit construction activity utilizing our products, scrap metal inflows to our recycling facilities, and retail
admissions and parts sales at our auto parts stores. Potential adverse impacts from climate change, including rising temperatures and
extreme weather events and conditions, may create health and safety issues for employees operating at our facilities and may lead to
an inability to maintain standard operating hours.
Catastrophic
events may disrupt our business and impair our ability to provide our platform to clients and consumers, resulting in costs for remediation,
client and consumer dissatisfaction, and other business or financial losses.
Our
operations depend, in part, on our ability to protect our facilities against damage or interruption from natural disasters, power or
telecommunications failures, criminal acts and similar events. Despite precautions taken at our facilities, the occurrence of a natural
disaster, an act of terrorism, vandalism or sabotage, spikes in usage volume or other unanticipated problems at a facility could result
in lengthy interruptions in the availability of our platform. Even with current and planned disaster recovery arrangements, our business
could be harmed. Also, in the event of damage or interruption, our insurance policies may not adequately compensate us for any losses
that we may incur. These factors in turn could further reduce revenue, subject us to liability and lead to decreased usage of our platform
and decrease sales of our advertising placements, any of which could harm our business.
We
depend on a small number of suppliers for the materials necessary to run our business. The loss of these suppliers, or their failure
to supply us with these materials, would materially and adversely affect our business.
We
depend on the availability of key materials for our business from a small number of third-party suppliers. Because there are a limited
number of suppliers for these materials, we may need to engage alternate suppliers to prevent a possible disruption. We do not have any
control over the availability of materials. If we or our manufacturers are unable to purchase these materials on acceptable terms, at
sufficient quality levels, or in adequate quantities, if at all, the successful operation of our business would be delayed or there would
be a shortage in supply, which would impair our ability to generate revenues from our business.
We
have substantial customer concentration, with a limited number of customers accounting for a substantial portion of our 2024 and 2023
revenues.
We
currently derive a significant portion of our revenues from three large corporate customers. The Company has a concentration of customers.
For the fiscal year ended December 31, 2024, two large customers individually accounted for $18,654,928 and $1,683,325, or approximately
55.99% and 5.05% of our revenues, respectively. For the fiscal year ended December 31, 2023, two large customers individually accounted
for $20,716,044 and $2,001,847, or approximately 58.08% and 5.61% of our revenues, respectively.
There
are inherent risks whenever a large percentage of total revenues are concentrated with a limited number of customers. It is not possible
for us to predict the future level of demand for our services that will be generated by this customer or the future demand for the products
and services of this customer in the end-user marketplace. In addition, revenues from larger customers, especially our largest customer
may fluctuate from time to time based on the commencement and completion of projects, the timing of which may be affected by market conditions
or other facts, some of which may be outside of our control. Further, some of our contracts with larger customers permit them to terminate
our relationship at any time (subject to notice and certain other provisions). If any of these customers experience declining or delayed
sales due to market, economic or competitive conditions, we could be pressured to reduce the prices we charge for our services which
could have an adverse effect on our margins and financial position and could negatively affect our revenues and results of operations
and/or trading price of our common stock. If our largest customer terminates our services, such termination would negatively affect our
revenues and results of operations and/or trading price of our common stock.
We
have a limited history upon which an evaluation of our prospects and future performance can be made and have no history of profitable
operations.
We
were incorporated in April 2013 and have a limited operating history and our business is subject to all of the risks inherent in the
establishment of a new business enterprise. Our likelihood of success must be considered in light of the problems, expenses, difficulties,
complications and delays frequently encountered in connection with development and expansion of a new business enterprise. We may sustain
losses in the future as we implement our business plan. There can be no assurance that we will operate profitably.
We
are highly dependent on the services of key executives, the loss of whom could materially harm our business and our strategic direction.
If we lose key management or significant personnel, cannot recruit qualified employees, directors, officers, or other personnel or experience
increases in our compensation costs, our business may materially suffer.
We
are highly dependent on our management team, specifically our Chief Executive Officer and Acting Chief Financial Officer, Danny Meeks. While we have an employment
agreement with Danny Meeks, such employment agreement permits Mr. Meeks to terminate such agreement upon notice. If we lose key
employees, our business may suffer. Furthermore, our future success will also depend in part on the continued service of our key
management personnel and our ability to identify, hire, and retain additional personnel. We carry “key-man” life
insurance on the life of our executive officer. We experience intense competition for qualified personnel and may be unable to
attract and retain the personnel necessary for the development of our business. Because of this competition, our compensation costs