Item 1A. Risk Factors.

RISK FACTORS

Investing in our common stock involves a high degree of risk. You should carefully consider the following risks and all of the other information contained in this Annual Report on Form 10-K, including our financial statements and related notes and the section “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” before investing in our common stock. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that affect us. We cannot assure you that any of the events discussed below will not occur. If any of the following risks actually occur, our business, prospects, operating results and financial condition could suffer materially. Additionally, to the extent the ongoing COVID-19 pandemic adversely affects our business and financial results, it may also have the effect of heightening many of the other risks incorporated by reference or set forth below. In such event, the trading price of our common stock could decline and you might lose all or part of your investment.

Summary of Risk Factors

An investment in our common stock involves various risks, and prospective investors are urged to carefully consider the matters discussed in the section titled “Risk Factors” prior to making an investment in our common stock. These risks include, but are not limited to, the following:

Risks Related to Our Financial Position and Need For Additional Capital

We are a clinical-stage biopharmaceutical company with a limited operating history and no products approved. We have incurred significant losses since inception, and we expect to incur continued and increasing losses over the next several years and may never achieve or maintain profitability.

Since inception, we have incurred significant operating losses. Our net loss was $27.5 million and $37.0 million for the years ended December 31, 2020 and 2019. As of December 31, 2020 and 2019, we had an accumulated deficit of $133.4 million and $105.8 million, respectively. To date, we have financed our operations primarily through private placements of convertible preferred stock and convertible promissory notes and the issuance of common stock upon the Company’s IPO. We have devoted substantially all of our financial resources and efforts to research and development, including preclinical studies and clinical trials and general and

administrative costs to support such efforts. We expect to continue to incur significant expenses and operating losses for the foreseeable future. Our net losses may fluctuate significantly from quarter to quarter and year to year, such that a period-to-period comparison of our results of operations may not be a good indication of our future performance. Our independent registered public accounting firm included an explanatory paragraph in their audit report on our financial statements as of and for the years ended December 31, 2020 and 2019 stating that our recurring losses from operations and negative cash flows since inception and our need to raise additional funding to finance our operations raise substantial doubt about our ability to continue as a going concern.

We expect to continue to incur significant and increasingly higher expenses and operating losses for the foreseeable future. We anticipate that our expenses will increase substantially if and as we:

• commence clinical trials of our product candidates GB-401 and GB-103;

• continue the research and development of other product candidates;

• seek to identify and develop additional product candidates;

• maintain, expand and protect our intellectual property portfolio;

Because of the numerous risks and uncertainties associated with pharmaceutical product development, we are unable to accurately predict the timing or amount of increased expenses or when, or if, we will be able to achieve profitability. Our expenses will increase if:

We have no product sales. We do not expect sales of any product candidate in the near future. For us to become profitable, we will need to succeed in developing and commercializing products. This will require us to be successful in a range of challenging activities, including:

• obtaining marketing approval for these product candidates;

• protecting our rights to our intellectual property portfolio.

We may never succeed in these activities and may never generate revenue that is sufficient or great enough to achieve profitability. Even if we do achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual basis. Our failure to

become and remain profitable would reduce the value of our company and could impair our ability to raise capital, expand our business, maintain our research and development efforts, diversify our product offerings or even continue our operations. A decline in the value of our company could also cause you to lose all or part of your investment.

We will need substantial additional funding to support our operations and pursue our growth strategy. If we are unable to raise capital when needed, we could be forced to delay, reduce or eliminate our product development programs or commercialization efforts.

We expect to devote substantial financial resources to our ongoing and planned activities, particularly as we conduct clinical trials for our wet AMD product candidates, in particular, late-stage clinical trials for GB-102, preclinical studies and clinical trials for our other product candidates, and seek marketing approval for any such product candidate for which we obtain favorable clinical results. We also expect to devote significant financial resources to conducting research and development and potentially seeking regulatory approval for our other product candidates. In addition, we plan to devote substantial financial resources to our commercialization efforts, including product manufacturing, sales, marketing and distribution for any of our product candidates for which we obtain marketing approval. Accordingly, we will need to obtain substantial additional funding in connection with our continuing and planned operations. If we are unable to raise capital when needed or on attractive terms, we could be forced to delay, reduce or eliminate our research and development programs or any future commercialization efforts.

Our independent registered public accounting firm included an explanatory paragraph in their audit report on the financial statements and related notes as of and for the years ended December 31, 2020 and 2019 stating that our recurring losses from operations and negative cash flows since inception and our need to raise additional funding to finance our operations raise substantial doubt about our ability to continue as a going concern. See “Our recurring losses and negative cash flows have raised substantial doubt regarding our ability to continue as a going concern, and the report of our independent registered public accounting firm for the year ended December 31, 2020 includes an explanatory paragraph indicating the conditions that raise substantial doubt about our ability to continue as a going concern” below for additional information.

As of December 31, 2020, we had cash and cash equivalents of $33.4 million and short-term investments of $61.6 million, which we believe is insufficient to fund our operations as currently planned for the next 12 months. Our future funding requirements will depend on many factors, including:

• subject to receipt of marketing approval, revenue received from product sales;

• the effect of competing technological and market developments;

• the impact of the COVID-19 pandemic.

Conducting preclinical testing and clinical trials is a time-consuming, expensive and uncertain process that takes years to complete. We may never generate the necessary data or results required to obtain regulatory approval of products with the market potential sufficient to enable us to achieve profitability. We do not expect to generate sales of any commercial product for several years, if at all. Accordingly, we may need to obtain substantial additional financing to achieve our business objectives. Adequate additional financing may not be available to us on acceptable terms, or at all. In addition, we may seek additional capital due to favorable market conditions or strategic considerations, even if we believe we have sufficient funds for our current or future operating plans.

Our recurring losses and negative cash flows have raised substantial doubt regarding our ability to continue as a going concern, and the report of our independent registered public accounting firm for the year ended December 31, 2020 includes an explanatory paragraph indicating the conditions that raise substantial doubt about our ability to continue as a going concern.

Based on our cash balances, recurring losses and our projected spending, there is a substantial doubt about our ability to continue as a going concern. If we are unable to obtain sufficient capital, our business, financial condition and results of operations will be materially and adversely affected, and we will need to obtain alternative financing or significantly modify our operational plans to continue as a going concern. If we are unable to continue as a going concern, we might have to liquidate our assets, and the values we receive for our assets in liquidation or dissolution could be significantly lower than the values reflected in our financial statements. Furthermore, even if we successfully raise additional capital in the next 12 months, given our planned expenditures for the next several years, including expenditures in connection with our clinical trials of GB-102, GB-103 and GB-401 and other new compounds, we may conclude, in connection with the issuance of our financial statements for any subsequent period, that there is substantial doubt regarding our ability to continue as a going concern. In addition, our lack of cash resources and our potential inability to continue as a going concern may materially adversely affect the price of our common stock and our ability to raise new capital or to enter into critical contractual relations with third parties.

Further, our independent registered public accounting firm included an explanatory paragraph in their audit report on the financial statements as of and for the years ended December 31, 2020 and 2019 stating that our recurring losses from operations and negative cash flows since inception and our need to raise additional funding to finance our operations raise substantial doubt about our ability to continue as a going concern. The inclusion of a going concern explanatory paragraph by our auditors, our lack of cash resources and our potential inability to continue as a going concern may materially adversely affect our share price and our ability to raise new capital or to enter into critical contractual relations with third parties.

Our limited operating history may make it difficult for you to evaluate the success of our business to date and to assess our future viability.

We are an early-stage company. Our operations to date have been limited to organizing and staffing our company, acquiring rights to intellectual property, business planning, raising capital, developing our technology, identifying potential product candidates, undertaking preclinical studies and clinical trials and manufacturing initial quantities of our products and product candidates. Consequently, any predictions you make about our future success or viability may not be as accurate as they could be if we had a longer operating history.

In addition, as a new business, we may encounter unforeseen expenses, difficulties, complications, delays and other known and unknown factors. We will need to transition from a company with a research and development focus to a company capable of supporting commercial activities. We may not be successful in such a transition.

We expect our financial condition and operating results to continue to fluctuate significantly from quarter-to-quarter and year-to-year due to a variety of factors, many of which are beyond our control. Accordingly, you should not rely upon the results of any quarterly or annual period as an indication of future operating performance.

Risks Related to Product Development, Regulatory Approval and Commercialization

The ongoing COVID-19 pandemic may, directly or indirectly, adversely affect our business, results of operations and financial condition.

Our business could be materially adversely affected, directly or indirectly, by the widespread outbreak of contagious disease, including the ongoing COVID-19 pandemic, which has spread to many of the countries in which we and our suppliers do business. National, state and local governments in affected regions have implemented and may continue to implement safety precautions, including quarantines, border closures, increased border controls, travel restrictions, shelter in place orders and shutdowns, business closures, cancellations of public gatherings and other measures. Organizations, businesses and individuals are taking additional steps to avoid or reduce infection, including business and facility closures or suspensions, limitations on travel and remote working measures. These measures are disrupting normal business operations both in and outside of affected areas and have had significant negative impacts on businesses and financial markets worldwide.

The COVID-19 pandemic has caused us to modify our business practices (including but not limited to curtailing or modifying employee travel, moving to full remote work for many employees, and cancelling physical participation in meetings, events and conferences) and we may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, patients and business partners. Our office-based employees have been working from home since March 2020, while we ensure essential staffing levels in our physical operations remain in place, including maintaining key personnel in our laboratories. Further, given that a greater number of our employees are working remotely than usual in response to the COVID-19 pandemic and related government actions, we could be exposed to greater risks related to cybersecurity and our information technologies systems.

Notwithstanding these measures, the COVID-19 pandemic could affect the health and availability of our workforce as well as those of the third parties we rely on taking similar measures. If members of our management and other key personnel in critical functions across our organization are unable to perform their duties or have limited availability due to the COVID-19 pandemic, we may not be able to execute on our business strategy and/or our operations may be negatively impacted. We may also experience limitations in employee resources, including because of sickness of employees or their families or the desire of employees to avoid contact with individuals or large groups of people. In addition, we have experienced and will continue to experience disruptions to our business operations resulting from quarantines, self-isolations and other restrictions on the ability of our employees to perform their jobs.

Separately, in response to the COVID-19 pandemic, in March 2020, the FDA announced its intention to postpone most foreign inspections of manufacturing facilities and temporarily postpone routine surveillance inspections of domestic manufacturing facilities. In July 2020, the FDA announced that it intended to restart on-site inspections based on its determination of when and where it is safest to conduct prioritized domestic inspections. Regulatory authorities outside the United States may adopt similar restrictions or other policy measures in response to the COVID-19 pandemic. If a prolonged government shutdown occurs, or if global health concerns continue to prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

The COVID-19 pandemic has disrupted business operations. The extent and severity of the impact on our business and clinical trials will be determined largely by the extent of disruptions in the supply chains for GB-102 and our future product candidates and delays in the conduct of current and future clinical trials. Further, our ability to continue our clinical trials may be adversely affected, directly or indirectly, by the COVID-19 pandemic. Currently we are experiencing disruptions in our ability to monitor patients in person due to clinics and hospitals closing sites or diverting the resources that are necessary to conduct our clinical trials to care for COVID-19 patients. Further, our suppliers, vendors and manufacturing and clinical trial partners have been adversely affected by the COVID-19 pandemic, including by adversely impacting the ability of their employees to get to their places of work and maintain the continuity of their on-site operations. COVID-19 could potentially lead to the closure of our research lab and potentially delay IND-enabling activities, which could delay the start of clinical trials. In addition, the impact of the COVID-19 pandemic on the operations of the FDA and other health authorities may delay potential approvals of GB-102 and our future product candidates.

The COVID-19 pandemic has also impacted and may further impact the global economic and capital markets, including by negatively impacting capital markets, which may adversely affect our business, liquidity and access to capital. It is further possible that the COVID-19 pandemic will cause an economic slowdown of potentially extended duration, and it is possible it could cause a global recession.

While it is not possible at this time to estimate the entirety of the impact that the COVID-19 pandemic will have on our business, operations, employees, customers or suppliers, continued spread of COVID-19, measures taken by governments, actions taken to protect employees and the broad impact of the pandemic on all business activities may materially and adversely affect our business, results of operations and financial condition, and the nature and extent of such impact is highly uncertain and unpredictable.

Our approach to the treatment of retinal diseases is unproven, and we do not know whether we will be able to successfully develop any products.

GB-102 is designed to deliver therapeutic drug levels to the retinal tissue for up to six months from a single intravitreal injection. There are currently no FDA-approved therapies that treat retinal diseases with a six-month dosing regimen. Our future success depends on the successful development of product candidates, including GB-102, based on this novel therapeutic approach. We have not yet demonstrated efficacy and safety for GB-102 or any other product candidates in a pivotal trial or obtained marketing approval of any product candidate. GB-102 may not demonstrate in patients any or all of the pharmacological benefits we believe it may possess. If we are unsuccessful in our development efforts, we may not be able to advance the development of GB-102 or any other product candidate, commercialize products, raise capital, expand our business or continue our operations.

We have not yet successfully initiated or completed any Phase 3 clinical trials nor commercialized any pharmaceutical products, which may make it difficult to evaluate our future prospects.

Our operations to date have been limited to financing and staffing our company, developing our technology and conducting preclinical research and Phase 1 and Phase 2 clinical trials for our product candidates. We have not yet demonstrated an ability to successfully initiate or complete Phase 3 clinical trials, obtain marketing approvals, manufacture a commercial-scale product or arrange for a third party to do so on our behalf, or conduct sales and marketing activities necessary for successful product commercialization. Accordingly, you should consider our prospects in light of the costs, uncertainties, delays and difficulties frequently encountered by clinical-stage biopharmaceutical companies such as ours. Any predictions made about our future success or viability may not be as accurate as they could be if we had a longer operating history or a history of successfully developing and commercializing pharmaceutical products.

We may encounter unforeseen expenses, difficulties, complications, delays and other known or unknown factors in achieving our business objectives. We will eventually need to transition from a company with a development focus to a company capable of supporting commercial activities. We may not be successful in such a transition.

We depend heavily on the success of our wet AMD product candidates, in particular GB-102. Clinical trials of our product candidates may not be successful. If we are unable to successfully complete clinical development of, and obtain marketing approvals for, our product candidates, or experience significant delays in doing so, or if after obtaining marketing approvals, we fail to commercialize these product candidates, our business will be materially harmed.

We have devoted a significant portion of our financial resources and business efforts to the development of our product candidates for diseases and conditions of the eye. In particular, we are investing substantial resources to complete the development of GB-102 for wet AMD. We cannot accurately predict when or if any of our retinal disease product candidates will prove effective or safe in humans or whether these product candidates will receive marketing approval. Our ability to generate product revenues sufficient to achieve profitability will depend heavily on our obtaining marketing approval for and commercializing GB-102.

The success of GB-102 and other product candidates will depend on many factors, including:

• effectively competing with other therapies;

• protecting our rights in our intellectual property portfolio.

If we do not achieve one or more of these factors in a timely manner or at all, we could experience significant delays or an inability to successfully commercialize our product candidates, which would materially harm our business.

If clinical trials of GB-102 or any other product candidate that we develop fail to demonstrate safety and efficacy to the satisfaction of the FDA, the EMA or other regulatory authorities or do not otherwise produce favorable results, we may incur additional costs or experience delays in completing, or ultimately be delayed or unable to complete, the development and commercialization of such product candidate.

Before obtaining marketing approval from regulatory authorities for the sale of any product candidate, including GB-102, we must complete preclinical development and then conduct extensive clinical trials to demonstrate the safety and efficacy of our product candidates in humans. Clinical testing is expensive, difficult to design and implement, can take many years to complete and is uncertain as to outcome. A failure of one or more clinical trials can occur at any stage of testing.

We designed our Phase 1/2a, Phase 2a and Phase 2b clinical trials of GB-102 to assess safety and preliminary efficacy and did not power the trials to measure any efficacy endpoints with statistical significance. We expect that our Phase 3 clinical trials for GB-102 for the treatment of wet AMD will be the first clinical trial for GB-102 to be powered with an appropriate number of patients to allow us to measure with statistical significance the non-inferiority of GB-102 compared to the standard of care. As a result, favorable results from our Phase 1/2a, Phase 2a and Phase 2b clinical trials may not necessarily predict a likelihood of achieving statistical significance of our primary efficacy endpoint in the Phase 3 clinical trials, which will be required for us to obtain marketing approval of GB-102. Additionally, our clinical trials are only evaluating GB-102 against treatment with Eylea, and there may be current or future products that deliver better results in terms of safety and/or efficacy.

The success of our product candidates is dependent upon the drug-elution profile during the course of intended therapy. Our Phase 1/2a and our Phase 2a trials have been open label and have not been compared to any active treatments. The ongoing Phase 2b trial with GB-102 in wet AMD contains a control arm with Eylea, which is the current standard of care. It is possible that, compared to Eylea, GB-102 will not demonstrate sufficient efficacy, durability and safety. For example, in our Phase 2a clinical trial of GB-102, three of ten patients in the 1 mg dose and five out of 11 in the 2 mg dose experienced adverse events, or AEs, with the most common being presence of medication in the anterior chamber. We have since terminated the development of the 2 mg dose of GB-102 in all of our clinical trial programs. If we determine to make any future changes to the formulation, such changes could affect the outcome of any subsequent clinical trials. As a result of any of these therapeutic or formulation changes, the outcome of our Phase 2b clinical trial or Phase 3 clinical trials may differ from the outcome of our Phase 1/2a clinical trial. If the results of clinical trials with any potential new therapeutic or product formulation, including therapies that do not involve intravitreal delivery, differs from the Phase 1/2a results, we may not be able to obtain regulatory approvals or, even if approved, achieve market acceptance of our product candidates.

The outcome of preclinical testing and early clinical trials may not be predictive of the success of later-stage clinical trials.

Interim results of a clinical trial do not necessarily predict final results. In addition, successful results in preclinical or early clinical trials do not ensure that later-stage clinical trials will be successful. In January 2019, we completed our Phase 1/2a trial of GB-102 evaluating various doses of GB-102 in patients with wet AMD. Although the data indicated that GB-102 was well-tolerated and reduced the need for supportive anti-vascular endothelial growth factor, or anti-VEGF, treatments, these results may not be indicative of future clinical trials with different designs. Moreover, as is common for early trials, in our Phase 1/2a trial, we looked at a number of efficacy measures without accounting for multiplicity. Accordingly, it is possible that positive results, including nominally statistically significant results, observed in our Phase 1/2a trial will not be replicated in our ongoing Phase 2b trial with a different design or in other future trials.

Subsequently, we tested two doses of an optimized formulation of GB-102 in a Phase 2a clinical trial in patients with macular edema, or ME, secondary to either DME or branch/central retinal vein occlusion, or RVO, as well as in the ongoing Phase 2b clinical trial in wet AMD. In that Phase 2a trial, we observed that there were more incidences of medication present in the anterior chamber with the 2 mg dose of GB-102, which, in a single patient, resulted in two serious adverse events, or SAEs (severe vision loss due to presence of medication in anterior chamber and corneal edema as a result of wash-out of the anterior chamber). As a result, we paused enrollment in our Phase 2b wet AMD trial until an interim safety analysis of both trials could be performed. On the basis of the results of this safety analysis, we terminated the development of the 2 mg dose of GB-102 in all of our clinical trial programs.

Some of our clinical trials, including our Phase 1/2a clinical trial and our ongoing Phase 2b clinical trial of GB-102 for the treatment of wet AMD, had or have small patient populations, making it difficult to predict whether the favorable results from such trials will be repeatable in larger, more advanced clinical trials. Moreover, preclinical and clinical data are often susceptible to varying interpretations and analyses, and many companies that have believed their product candidates performed satisfactorily in preclinical studies and clinical trials have nonetheless failed to obtain marketing approval of their products.

Even if the results of future Phase 3 clinical trials are positive, we may have to commit substantial time and additional resources to conducting further preclinical studies and clinical trials before obtaining FDA approval for any of our drug candidates.

If serious adverse or unacceptable side effects are identified during the development of GB-102 or any other product candidates that we may develop, we may need to abandon or limit our development of such product candidates.

If GB-102 or any of our other product candidates are associated with SAEs or other undesirable side effects in clinical trials or have characteristics that are unexpected, we may need to abandon their development or limit development to more narrow uses or subpopulations in which the SAEs, undesirable side effects or other characteristics are less prevalent, less severe or more acceptable from a risk-benefit perspective.

Out of 32 patients enrolled in our Phase 1/2a trial, no GB-102 related non-ocular adverse events, or AEs, and no SAEs or dose limiting toxicities were reported. All drug-related AEs were mild or moderate and transient and resolved by the end of the trial. The most common AE observed in more than one patient was vitreous floaters (n=5). Most vitreous floaters are caused by age-related changes that occur as the vitreous becomes more liquid.

Microscopic fibers in the vitreous tend to clump and can cast tiny shadows on the retina, commonly referred to as floaters. Intravitreal injections can increase the number of floaters, and any other particle that similarly casts a shadow may also be referred to as a floater. For nine patients enrolled in the higher dose cohorts, medication presence was observed in the anterior chamber. All nine of those patients completed the trial. Overall, the medication presence in the anterior chamber appeared to be self-limited and reversible, with no long-term consequences.

In our Phase 2a clinical trial, there were no drug-related, non-ocular AEs. The patients in the 1 mg dose experienced nine drug related AEs, and seven out of ten patients demonstrated no AEs. One patient had only vitreous floaters and one patient had vitreous floaters, medication present in the vitreous, and reduction in vision. The other AEs occurred in a single patient with medication present in the anterior chamber. The 2 mg dose was associated with medication present in the anterior chamber in five out of 11 patients. The majority of AEs occurred in one patient. Two SAEs were reported in a single patient (severe vision loss due to presence of medication in the anterior chamber and corneal edema as a result of wash-out of the anterior chamber). We also conducted an interim safety analysis in the Phase 2b study. No drug related SAEs were reported in the Phase 2b study, but presence of medication in the anterior chamber was reported in four patients in the GB-102 2 mg dose group and one patient in the 1 mg dose group.

On the basis of this data, we terminated the development of the 2 mg dose of GB-102 in all of our clinical trial programs. We believe that the number of microparticles injected in the 2 mg dose (approximately 2 million) were too numerous to allow adequate aggregation. All patients in the Phase 2b trial having received GB-102 at either the 1 mg or 2 mg doses for the first six-month period of the study have now received the 1 mg dose as repeat therapy at month six. Notwithstanding the results from our clinical trials to date, the 1 mg dose of GB-102, as well as GB-102 for other indications and our other product candidates, may fail to demonstrate favorable efficacy, safety and tolerability.

There are potential side effects that are related to intravitreal injection procedures. These side effects are shared by any treatment that uses intravitreal injection as a means of delivering medication. These can include conjunctival hemorrhage, punctate keratitis, eye pain, conjunctival hyperemia, intraocular pressure rise, intraocular inflammation, retinal detachment and endophthalmitis.

Finally, clinical trials by their nature utilize a sample of the potential patient population. However, with a limited number of patients and limited duration of exposure, rare and severe side effects of our product candidates may only be uncovered when a significantly larger number of patients are exposed to the product. If safety problems occur or are identified after one of our products reaches the market, the FDA, the EMA or other regulatory authorities may require that we amend the labeling of our product, recall our product or even withdraw approval for our product.

If we experience any of a number of possible unforeseen events in connection with our clinical trials, potential marketing approval or commercialization of our product candidates could be delayed or prevented.

We may experience numerous unforeseen events during, or as a result of, clinical trials that could delay or prevent our ability to receive marketing approval or commercialize our retinal disease product candidates or any other product candidates that we may develop, including:

If we are required to conduct additional clinical trials or other testing of our product candidates beyond those that we currently contemplate, if we are unable to successfully complete clinical trials of our product candidates or other testing, if the results of these trials or tests are not favorable or are only modestly favorable or if there are safety concerns, we may:

• be subject to additional post-marketing testing requirements; or

• have the product removed from the market after obtaining marketing approval.

Our product development costs will also increase if we experience delays in testing or marketing approvals. We do not know whether any of our preclinical studies or clinical trials will begin as planned, will need to be restructured or will be completed on schedule, or at all. Significant preclinical or clinical trial delays also could shorten any periods during which we may have the exclusive right to commercialize our product candidates or allow our competitors to bring products to market before we do and impair our ability to successfully commercialize our product candidates.

If we experience delays or difficulties in the enrollment of patients in clinical trials, our receipt of necessary regulatory approvals could be delayed or prevented.

We may not be able to initiate or continue clinical trials for our wet AMD, DME, diabetic retinopathy, or DR, or glaucoma product candidates or our other product candidates that we may develop if we are unable to locate and enroll a sufficient number of eligible patients to participate in these trials as required by the FDA, the EMA or similar regulatory authorities outside the United States. Although there is a significant prevalence of disease in the areas of ophthalmology in which we are focused, we may nonetheless experience unanticipated difficulty with patient enrollment.

A variety of factors affect patient enrollment, including:

• the eligibility criteria for the study in question;

• the perceived risks and benefits of the product candidate under study;

• the efforts to facilitate timely enrollment in clinical trials;

• the patient referral practices of physicians;

• the ability to monitor patients adequately during and after treatment;

• the lack of adequate compensation for prospective patients.

Our inability to enroll a sufficient number of patients for our clinical trials would result in significant delays, could require us to abandon one or more clinical trials altogether and could delay or prevent our receipt of necessary regulatory approvals. Enrollment

delays in our clinical trials may result in increased development costs for our product candidates, which would cause the value of our company to decline and limit our ability to obtain additional financing.

We may not be successful in our efforts to develop product candidates based on our proprietary technology other than GB-102 or expand the use of our proprietary technology for treating additional eye diseases and conditions.

We are currently directing all of our development efforts towards applying our proprietary technology to product candidates that are designed to provide sustained delivery of therapeutic agents to the eye using active pharmaceutical ingredients that are currently used in FDA-approved drugs. We have a number of product candidates at various stages of development and are exploring the potential use of our proprietary technologies in other eye diseases and conditions. Our existing product candidates and any other potential product candidates that we identify may not be suitable for continued preclinical or clinical development, including as a result of being shown to have harmful side effects or other characteristics that indicate that they are unlikely to be products that will receive marketing approval and achieve market acceptance. If we do not successfully develop and commercialize our product candidates that we develop based upon our technological approach, we will not be able to obtain substantial product revenues in future periods.

Sunitinib, the active ingredient of GB-102 and GB-103, has a boxed warning regarding hepatotoxicity for its use in oncology indications.

Sunitinib, which was originally developed for the treatment of renal cell carcinoma and gastrointestinal stromal tumors, has been shown to cause liver damage, or hepatotoxicity, in some patients. As a result, in 2010, the prescribing information for orally administered sunitinib for its use in treating renal cell carcinoma and gastrointestinal stromal tumors was revised to include a boxed warning regarding hepatotoxicity. A boxed warning is a warning put in the labeling of a drug product that is designed to call attention to serious or life-threatening risks.

There is no approved therapy for retinal diseases using sunitinib. We have not seen any evidence of hepatotoxicity in our preclinical studies or clinical trials. Moreover, preclinical toxicity studies and the results of our Phase 1/2a clinical trials with GB-102 have not detected the presence of sunitinib in the systemic blood circulation at any time point. However, the boxed warning for orally administered sunitinib may make it more difficult for us to achieve widespread market acceptance or regulatory approval for our product candidates.

Moreover, there can be no assurance that comparable AEs and other side effects will not appear over the course of our trials, which could have a material adverse effect on our business and operating results.

We may expend our limited resources to pursue a particular product candidate or indication and fail to capitalize on product candidates or indications that may be more profitable or for which there is a greater likelihood of success.

Because we have limited financial and managerial resources, we focus on research programs and product candidates that we identify for specific indications. As a result, we may forego or delay pursuit of opportunities with other product candidates or for other indications that later prove to have greater commercial potential. Our resource allocation decisions may cause us to fail to capitalize on viable commercial products or profitable market opportunities. Our spending on current and future research and development programs and product candidates for specific indications may not yield any commercially viable products. If we do not accurately evaluate the commercial potential or target market for a particular product candidate, we may relinquish valuable rights to that product candidate through collaboration, licensing or other royalty arrangements in cases in which it would have been more advantageous for us to retain sole development and commercialization rights to such product candidate.

We intend to conduct, and may in the future conduct, clinical trials for product candidates at sites outside of the United States, and the FDA may not accept data from trials conducted in such locations.

Although the FDA may accept data from clinical trials conducted outside the United States, acceptance of this data is subject to conditions imposed by the FDA. For example, the clinical trial must be well-designed and conducted and performed by qualified investigators in accordance with ethical principles. The trial population must also adequately represent the U.S. population, and the data must be applicable to the U.S. population and U.S. medical practice in ways that the FDA deems clinically meaningful. In addition, while these clinical trials are subject to applicable local laws, FDA acceptance of the data will depend on its determination that the trials also complied with all applicable U.S. laws and regulations. If the FDA does not accept the data from any trial that we conduct outside the United States, it would likely result in the need for additional trials, which would be costly and time-consuming and delay or permanently halt our development of the applicable product candidates.

Other risks inherent in conducting international clinical trials include:

• foreign exchange fluctuations;

• diminished protection of intellectual property in some countries; and

• political and economic risks relevant to foreign countries.

Our business and operations would suffer in the event of computer system failures or security breaches.

In the ordinary course of our business, we collect, store and transmit confidential information, including intellectual property, proprietary business information, health information and personal information. Despite the implementation of security measures, our internal computer systems, and those of our contract research organizations, or CROs, and other third parties on which we rely, are vulnerable to damage from computer viruses, unauthorized access, cyberattacks, natural disasters, fire, terrorism, war and telecommunication and electrical failures. Cyberattacks are increasing in their frequency, sophistication and intensity. Cyberattacks could include the deployment of harmful malware, denial-of-service attacks, social engineering and other means to affect service reliability and threaten the confidentiality, integrity and availability of information. Significant disruptions of our information technology systems or security breaches could adversely affect our business operations and/or result in the loss, misappropriation, and/or unauthorized access, use or disclosure of, or the prevention of access to, confidential information (including trade secrets or other intellectual property, proprietary business information and personal information), and could result in financial, legal, business and reputational harm to us. If such disruptions were to occur and cause interruptions in our operations, it could result in a material disruption of our product development programs. For example, the loss of clinical trial data from completed, ongoing or planned clinical trials could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the data. Further, the COVID-19 pandemic has resulted in a significant number of our employees and partners working remotely, which increases the risk of a data breach or issues with data and cybersecurity. To the extent that any disruption or security breach results in a loss of, or damage to, our data or applications, or inappropriate disclosure of confidential or proprietary information, we could incur liability and the further development of our future product candidates could be delayed. In addition, our remediation efforts may not be successful. If we do not allocate and effectively manage the resources necessary to build and sustain the proper technology and cybersecurity infrastructure, we could suffer significant business disruption, including transaction errors, supply chain or manufacturing interruptions, processing inefficiencies, data loss or the loss of or damage to intellectual property or other proprietary information.

Moreover, if a computer security breach affects our systems or results in the unauthorized access, use or disclosure of personal information, our reputation could be materially damaged. In addition, such a breach may require notification to governmental agencies, the media and/or affected individuals pursuant to various federal, state and international privacy and security laws, if applicable, including HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, or HITECH, and its implementing rules and regulations, as well as regulations promulgated by the Federal Trade Commission and state breach notification laws. We would also be exposed to a risk of loss or litigation and potential liability under laws, regulations and contracts that protect the privacy and security of personal information. As described below in “We are subject to stringent and changing privacy laws, regulations and standards as well as contractual obligations related to data privacy and security. Our actual or perceived failure to comply with such obligations could harm our reputation, subject us to significant fines and liability, or otherwise adversely affect our business or prospects,” the California Consumer Privacy Act, or CCPA, provides a private right of action for security breaches, which could lead to some form of remedy including regulatory scrutiny, fines, private right of action settlements, and other consequences. The financial exposure from the events referenced above could either not be insured against or not be fully covered through any insurance that we may maintain, and there can be no assurance that the limitations of liability in any of our contracts would be enforceable or adequate or would otherwise protect us from liabilities or damages as a result of the events referenced above. Any of the foregoing could have a material adverse effect on our business, reputation, results of operations, financial condition and prospects.

Risks Related to Manufacturing

We could potentially contract with third parties for the production of our product candidates. This could increase the risk that we will not have sufficient quantities of our product candidates or such quantities at an acceptable cost, which could delay, prevent or impair our development or commercialization efforts.

We currently rely on third parties for the production of GB-102 and our product candidates for preclinical testing and clinical trials, including supply of active pharmaceutical ingredient drug substance, sunitinib, as well as polymers used in the formulations, such as poly(lactic-co-glycolic acid), or PLGA, and other raw materials and for sterilization of the finished product. We intend to build our own manufacturing capabilities, but could also decide to keep contracting with third parties if it is more advantageous. While we believe that our existing manufacturing partners have facilities that will be sufficient to meet our requirements for manufacturing GB-102 and any of our product candidates for which we obtain marketing approval, we may in the future need to rely on additional CMOs, for some aspects of the manufacture of our product candidates.

Reliance on third parties for aspects of the supply of our product candidates entails additional risks, including:

• lack of direct control over regulatory compliance and quality assurance;

• the possible breach of an agreement by the third party; and

We, or our third-party suppliers or CMOs, may not be able to comply with quality assurance standards, current good manufacturing practices regulations or similar regulatory requirements outside the United States. If we or our CMOs cannot successfully manufacture material that conforms to our specifications and the strict regulatory requirements of the FDA and comparable regulatory authorities in other jurisdictions, if the quality and accuracy of the manufacturing and quality control data is compromised due to failure to adhere to protocols or to regulatory requirements or if we or our CMOs fail to maintain a compliance status acceptable to the FDA or comparable regulatory authorities in other jurisdictions, we may not be able to secure and/or maintain regulatory approval for our product candidates. In addition, we or our CMOs must maintain adequate quality control, quality assurance and qualified personnel. If we or our CMOs cannot maintain a compliance status acceptable to the FDA or a comparable regulatory authority in another jurisdiction, we may need to find alternative manufacturing facilities, which would significantly impact our ability to develop, obtain regulatory approval for or market our product candidates, if approved.

Any failure to achieve and maintain compliance with these laws, regulations and standards could subject us to the risk that we may have to suspend the manufacturing of our product candidates and that obtained approvals could be revoked, which would adversely affect our business and reputation. Our failure, or the failure of our suppliers or CMOs, to comply with applicable regulations could result in sanctions being imposed on us, including clinical holds, fines, injunctions, civil penalties, delays, suspension or withdrawal of approvals, license revocation, seizures or recalls of product candidates or products, operating restrictions and criminal prosecutions, any of which could significantly and adversely affect supplies of our products and product candidates. The same risks, however, would also apply to any internal manufacturing facilities, should we in the future decide to build internal manufacturing capacity.

Our potential future dependence upon others for the manufacture of our product candidates may adversely affect our future profit margins and our ability to commercialize any products that receive regulatory approval on a timely and competitive basis.

The manufacture of our product development candidates requires outsourced, custom manufacturing and we may encounter difficulties in production, particularly with respect to formulation, process development or scaling up of our manufacturing capabilities. If we, or our CMOs, encounter such difficulties, our ability to provide supply of our product candidates for preclinical studies, clinical trials or our products for patients, if approved, could be delayed or stopped, or we may be unable to maintain a commercially viable cost structure.

As product candidates are developed, it is common that various aspects of the development program, such as manufacturing methods, are altered along the way in an effort to optimize processes and results. For example, due to adverse events related to presence of medication in the anterior chamber observed in some patients in the Phase 1/2a trial for GB-102, changes were made to the manufacturing process for GB-102. Such changes carry the risk that they will not achieve these intended objectives, and any of these changes could cause our product candidates to perform differently and affect the results of planned preclinical studies or future clinical trials.

Currently, GB-102 is manufactured by Lubrizol Life Science Health. Although we have secured sufficient quantities of drug substance and drug product to supply our trials, we will need to obtain additional supplies from our own manufacturing or from third-party manufacturers that we have engaged, or expect to engage. Although we are working to develop commercially viable manufacturing processes, doing so is a difficult and uncertain task, and there are risks associated with scaling to the level required for advanced clinical trials or commercialization, including, among others, cost overruns, potential problems with process scale up, formulation or formulation changes, process reproducibility, stability issues, lot consistency and timely availability of reagents or raw materials. Any of these challenges could delay completion of preclinical studies or clinical trials, require bridging studies or trials, or the repetition of one or more studies or trials, increase development costs, delay approval of our product candidates, impair commercialization efforts, increase our cost of goods and have an adverse effect on our business, financial condition, results of operations and growth prospects.

We have no experience manufacturing any of our product candidates at a commercial scale. We, or our CMOs, may be unable to successfully scale up manufacturing of our product candidates in sufficient quality and quantity, which would delay or prevent us from developing our product candidates and commercializing approved products, if any.

In order to conduct clinical trials of, and commercialize, our product candidates, we will need to manufacture them in large quantities. We may, in the future, establish and operate our own manufacturing facility, which will require significant amounts of

additional capital and adequate personnel infrastructure. We, or any manufacturing partners, may be unable to successfully increase the manufacturing capacity for any of our product candidates in a timely or cost-effective manner, or at all. In addition, quality issues may arise during scale-up activities. If we, or any manufacturing partners, are unable to successfully scale up the manufacture of our product candidates in sufficient quality and quantity, the development, testing and clinical trials of that product candidate may be delayed or infeasible, and regulatory approval or commercial launch of any resulting product may be delayed or not obtained, which could significantly harm our business.

Changes in methods of product candidate manufacturing, including changes introduced by building our own manufacturing capabilities, may result in additional costs or delay.

We currently rely on third parties for the production of GB-102 and our product candidates for preclinical testing and clinical trials, including supply of active pharmaceutical ingredient drug substance, sunitinib, as well as polymers used in the formulations, such as PLGA and other raw materials and for sterilization of the finished product. We intend to build our own manufacturing capabilities, and it is common that various aspects of the development program, such as manufacturing methods, may be altered in an effort to optimize yield, manufacturing batch size, minimize costs and achieve consistent quality and results. Such changes carry the risk that they will not achieve these intended objectives. Any of these changes could cause our product candidates to perform differently and affect the results of planned clinical trials or other future clinical trials conducted with the altered materials. This could delay completion of clinical trials, require the conduct of bridging clinical trials or the repetition of one or more clinical trials, increase clinical trial costs, delay approval of our product candidates and jeopardize our ability to commercialize our product candidates and generate revenue.

Our current operations are in two locations, and we or the third parties upon whom we depend may be adversely affected by earthquakes or other natural disasters and our business continuity and disaster recovery plans may not adequately protect us from a serious disaster.

Our current operations are located in Baltimore, Maryland and Redwood City, California, and our clinical trials are currently conducted at a limited number of other sites. Any unplanned event, such as earthquake, flood, fire, explosion, extreme weather condition, medical epidemic or pandemic, power shortage, telecommunication failure or other natural or manmade accidents or incidents that result in us being unable to fully utilize our facilities, or the manufacturing facilities of our CMOs, may have a material and adverse effect on our ability to operate our business, particularly on a daily basis, and have significant negative consequences on our financial and operating conditions. Loss of access to these facilities may result in increased costs, delays in the development of our product candidates or interruption of our business operations. Earthquakes or other natural disasters could further disrupt our operations and have a material and adverse effect on our business, financial condition, operating results and prospects. If a natural disaster, power outage or other event occurred that prevented us from using all or a significant portion of our headquarters, that damaged critical infrastructure, such as our research or manufacturing facilities or the manufacturing facilities of our CMOs, or that otherwise disrupted operations, it may be difficult or, in certain cases, impossible for us to continue our business for a substantial period of time. The disaster recovery and business continuity plans we have in place may prove inadequate in the event of a serious disaster or similar event. We may incur substantial expenses as a result of the limited nature of our disaster recovery and business continuity plans, which could have a material adverse effect on our business. As part of our risk management policy, we maintain insurance coverage at levels that we believe are appropriate for our business. However, in the event of an accident or incident at these facilities, we cannot assure you that the amounts of insurance will be sufficient to satisfy any damages and losses. If our facilities, or the manufacturing facilities of our CMOs, are unable to operate because of an accident or incident or for any other reason, even for a short period of time, any or all of our research and development programs may be harmed. Any business interruption could have a material and adverse effect on our business, financial condition, operating results and prospects.

Risks Related to Commercialization

Our products may fail to achieve the degree of market acceptance by physicians, patients, third-party payors and others in the medical community necessary for commercial success, and the market opportunity for these products may be smaller than we estimate.

GB-102 or any of our product candidates that receives marketing approval may fail to gain market acceptance by physicians, patients, third-party payors and others in the medical community. We have not received marketing approval and have not commercially launched GB-102 and cannot yet accurately predict whether it will gain market acceptance and become commercially successful.

The degree of market acceptance of GB-102 or any product candidate for which we obtain marketing approval will depend on a number of factors, including:

• the efficacy and potential advantages compared to alternative treatments;

• the clinical indications for which the product is approved;

• the strength of our marketing and distribution support;

• the timing of market introduction of competitive products;

• the availability of third-party coverage and adequate reimbursement;

• the prevalence and severity of any side effects; and

• any restrictions on the use of our products together with other medications.

For example, even though we believe that GB-102 will have a longer duration of effect compared to approved treatments for wet AMD, it is possible that the market acceptance of GB-102, if it is approved for marketing, could be less than anticipated.

Our assessment of the potential market opportunity for GB-102 and our other product candidates is based on industry and market data that we obtained from industry publications and research, surveys and studies conducted by third parties. Industry publications and third-party research, surveys and studies generally indicate that their information has been obtained from sources believed to be reliable, although they do not guarantee the accuracy or completeness of such information. While we believe these industry publications and third-party research, surveys and studies are reliable, we have not independently verified such data. If the actual market for GB-102 or any of our product candidates is smaller than we expect, our product revenue may be limited, and it may be more difficult for us to achieve or maintain profitability.

If we are unable to establish and maintain adequate sales, marketing and distribution capabilities, we may not be successful in commercializing GB-102 or any product candidates if and when they are approved.

We have no experience in the sales, marketing and distribution of drug and device products, or in building a commercial team to do so. To achieve commercial success for GB-102 and any product candidate for which we obtain marketing approval, we will need to establish and maintain adequate sales, marketing and distribution capabilities, either ourselves or through collaborations or other arrangements with third parties. If GB-102 is approved for marketing, we plan on commercializing GB-102 through our own specialty sales force. Alternatively, we may rely on a network of independent distributors across the United States to sell GB-102. We expect that a direct sales force will be required to effectively market and sell GB-102. We cannot be certain when, if ever, we will recognize revenue from commercialization of our product candidates in any international market. If we decide to commercialize our potential products outside of the United States, we expect to utilize a variety of collaboration, distribution and other marketing arrangements with one or more third parties. These may include independent distributors, pharmaceutical companies or our own direct sales organization.

There are risks involved with both establishing our own sales, marketing and distribution capabilities and with entering into arrangements with third parties to perform these services. We may not be successful in entering into arrangements with third parties to sell, market and distribute our products or may be unable to do so on terms that are most beneficial to us. We likely will have little control over such third parties, and any of them may fail to devote the necessary resources and attention to market, sell and distribute our products effectively. Our product revenues and our profitability, if any, under third-party collaboration, distribution or other marketing arrangements may also be lower than if we were to sell, market and distribute a product ourselves. On the other hand, recruiting and training a sales force is expensive and time-consuming and could delay any product launch. If the commercial launch of any product candidate for which we recruit a sales force and establish marketing capabilities is delayed or does not occur for any reason, we would have prematurely or unnecessarily incurred these commercialization expenses. This may be costly, and our investment would be lost if we cannot retain or reposition our sales and marketing personnel.

Other factors that may inhibit our efforts to commercialize products on our own include:

If we do not establish sales, marketing and distribution capabilities successfully, either on our own or in collaboration with third parties, we will not be successful in commercializing GB-102 or any of our product candidates.

We face substantial competition, which may result in others discovering, developing or commercializing products before or more successfully than we do.

The development and commercialization of new drug and device products is highly competitive. We face competition with respect to our product candidates that we may seek to develop or commercialize, from major pharmaceutical companies, specialty pharmaceutical companies and biotechnology companies worldwide. Potential competitors also include academic institutions, government agencies and other public and private research organizations that conduct research, seek patent protection and establish collaborative arrangements for research, development, manufacturing and commercialization.

The current standard of care for wet AMD is monotherapy administration of anti-VEGF drugs, principally Eylea, Avastin and Lucentis, which are well-established therapies and are widely accepted by physicians, patients and third-party payors, as well as Beovu, the most recently approved anti-VEGF drug. There are also several product candidates in late-stage clinical development, including those being developed by F. Hoffmann-La Roche AG, Kodiak Sciences Inc., Regeneron Pharmaceuticals, Inc., REGENXBIO, Inc., Chengdu Kanghong Pharmaceutical Group Co., Ltd and Opthea Limited. Physicians, patients and third-party payors may not accept the addition of GB-102 to their current treatment regimens for a variety of potential reasons, including:

• if they do not wish to incur the additional cost, if any, of GB-102;

• if sufficient coverage and reimbursement are not available; and

• if they do not perceive GB-102 to have a favorable risk-benefit profile.

We are developing GB-102 as an alternative to existing anti-VEGF drugs, including Eylea, Avastin, Lucentis, and Beovu. Accordingly, if approved, GB-102 would directly compete with these therapies. While we believe GB-102 will compete favorably with existing anti-VEGF drugs, future approved standalone or combination therapies for wet AMD with demonstrated improved efficacy over GB-102 or currently marketed therapies with a favorable safety profile and any of the following characteristics might pose a significant competitive threat to us:

• a mechanism of action that does not involve VEGF;

• a method of administration that effectively avoids intravitreal injection; and

We also expect that product candidates currently in clinical development, or that could enter clinical development in the near future, could represent additional competition, if approved. These product candidates may provide efficacy, safety, convenience and other benefits that are not provided by currently marketed therapies. Because there are a variety of means to treat wet AMD, our patents and other proprietary protections for GB-102 will not prevent development or commercialization of product candidates that are different from GB-102.

Our commercial opportunity could be reduced or eliminated if our competitors develop and commercialize products that are safer, more effective, have fewer or less severe side effects, are more convenient or are less expensive than our products. Our competitors also may obtain FDA or other regulatory approval for their products more rapidly than we may obtain approval for ours, which could result in our competitors establishing a strong market position before we are able to enter the market. In addition, certain of these products may be available on a biosimilar basis, and our product candidates may not demonstrate sufficient additional clinical benefits to physicians, patients or payors to justify a higher price compared to generic products. In many cases, insurers or other third-party payors, particularly Medicare, seek to encourage the use of biosimilar products.

Many of the companies against which we are competing or against which we may compete in the future have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, conducting clinical trials, obtaining regulatory approvals and marketing approved products than we do. Mergers and acquisitions in the pharmaceutical and biotechnology industries may result in even more resources being concentrated among a smaller number of our competitors. Smaller and other early stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies. These third parties compete with us in recruiting and retaining qualified scientific and management personnel, establishing clinical trial sites and patient registration for clinical trials, as well as in acquiring technologies complementary to, or necessary for, our programs.

Any product candidate for which we obtain marketing approval may become subject to unfavorable pricing regulations, third-party coverage or reimbursement practices or healthcare reform initiatives, which could harm our business.

Our ability to commercialize our product candidates that we may develop successfully will depend, in part, on the extent to which coverage and adequate reimbursement for these products and related treatments will be available from government healthcare programs, private health insurers, managed care plans and other organizations. Government authorities and third-party payors, such as private health insurers and health maintenance organizations, decide which medications they will pay for and establish reimbursement levels. A primary trend in the U.S. healthcare industry and elsewhere is cost containment. Government authorities and third-party payors have attempted to control costs by limiting coverage and the amount of reimbursement for particular medications. Increasingly, third-party payors are requiring that drug and device companies provide them with predetermined discounts from list prices and are challenging the prices charged for medical products. Coverage and reimbursement may not be available for GB-102 or any other product that we commercialize and, even if they are available, the level of reimbursement may not be satisfactory.

Inadequate reimbursement may adversely affect the demand for, or the price of, GB-102 or any product candidate for which we obtain marketing approval. Obtaining and maintaining adequate reimbursement for our products may be difficult. We may be required to conduct expensive pharmacoeconomic studies to justify coverage and reimbursement or the level of reimbursement relative to other therapies. If coverage and adequate reimbursement are not available or reimbursement is available only to limited levels, we may not be able to successfully commercialize GB-102 or any other product candidates for which we obtain marketing approval.

There may be significant delays in obtaining coverage and reimbursement for newly approved drugs, and coverage may be more limited than the indications for which the drug is approved by the FDA or similar regulatory authorities outside the United States. Moreover, eligibility for coverage and reimbursement does not imply that a drug will be paid for in all cases or at a rate that covers our costs, including research, development, manufacture, sale and distribution expenses. Interim reimbursement levels for new drugs, if applicable, may also not be sufficient to cover our costs and may not be made permanent. Reimbursement rates may vary according to the use of the drug and the clinical setting in which it is used, may be based on reimbursement levels already set for lower cost drugs and may be incorporated into existing payments for other services. Net prices for drugs may be reduced by mandatory discounts or rebates required by government healthcare programs or private payors and by any future relaxation of laws that presently restrict imports of drugs from countries where they may be sold at lower prices than in the United States. Third-party payors often rely upon Medicare coverage policy and payment limitations in setting their own reimbursement policies. Our inability to promptly obtain coverage and adequate reimbursement rates from both government-funded and private payors for any FDA-approved products that we develop would compromise our ability to generate revenues and become profitable.

Regulations that govern marketing approvals, pricing, coverage and reimbursement for new drug and device products vary widely from country to country. Current and future legislation may significantly change the approval requirements in ways that could involve additional costs and cause delays in obtaining approvals. Some countries require approval of the sale price of a drug before it can be marketed. In many countries, the pricing review period begins after marketing or product licensing approval is granted. In some foreign markets, prescription pharmaceutical pricing remains subject to continuing governmental control even after initial approval is granted. As a result, we might obtain marketing approval for a product in a particular country, but then be subject to price regulations that delay our commercial launch of the product, possibly for lengthy time periods, and negatively impact the revenues we are able to generate from the sale of the product in that country. To obtain reimbursement or pricing approval in some countries, we may be required to conduct a clinical trial that compares the cost-effectiveness of our product candidate to other available therapies. Adverse pricing limitations may hinder our ability to recoup our investment in one or more product candidates, even if our product candidates obtain marketing approval.

Any product candidate for which we obtain marketing approval in the United States or in other countries may not be considered medically reasonable and necessary for a specific indication, may not be considered cost-effective by third-party payors, coverage and an adequate level of reimbursement may not be available and reimbursement policies of third-party payors may adversely affect our ability to sell our product candidates profitably.

Product liability lawsuits against us could cause us to incur substantial liabilities and to limit commercialization of any products that we develop.

We face an inherent risk of product liability exposure related to the use of our product candidates that we develop in clinical trials. We face an even greater risk for any products we develop and sell commercially. If we cannot successfully defend ourselves against claims that our product candidates or products caused injuries, we will incur substantial liabilities. Regardless of merit or eventual outcome, liability claims may result in:

• decreased demand for any product candidates that we develop;

• injury to our reputation and significant negative media attention;

• withdrawal of clinical trial participants;

• significant costs to defend the related litigation;

• substantial monetary awards to trial participants or patients;

• loss of revenue;

• the inability to commercialize any products that we develop.

We currently hold $10 million in product liability insurance coverage, with a per incident limit of $250,000, which may not be adequate to cover all liabilities that we may incur. We will need to increase our insurance coverage as we expand our clinical trials and should we eventually realize sales of any product candidate for which we obtain marketing approval.

Insurance coverage is increasingly expensive. We may not be able to maintain insurance coverage at a reasonable cost or in an amount adequate to satisfy any liability that may arise.

Risks Related to Our Dependence on Third Parties

We may enter into collaborations with third parties for the development and commercialization of GB-102 or other product candidates. If our collaborations are not successful, we may not be able to capitalize on the market potential of these product candidates.

We may utilize a variety of types of collaboration arrangements with third parties to develop or commercialize any of our product candidates. We also may enter into arrangements with third parties to perform these services in the United States if we do not establish our own sales, marketing and distribution capabilities in the United States for our product candidates or if we determine that such arrangements are otherwise beneficial. We also may seek collaborators for development and commercialization of other product candidates. Our likely collaborators for any sales, marketing, distribution, development, licensing or broader collaboration arrangements include large and mid-size pharmaceutical companies, regional and national pharmaceutical companies and biotechnology companies. We are not currently party to any such arrangement. Our ability to generate revenues from these arrangements will depend on our collaborators’ abilities and efforts to successfully perform the functions assigned to them in these arrangements.

Collaborations that we enter into may pose a number of risks, including the following:

• collaborators may not perform their obligations as expected;

Collaboration agreements may not lead to development or commercialization of product candidates in the most efficient manner, or at all. If any collaborations that we enter into do not result in the successful development and commercialization of products or if one of our collaborators terminates its agreement with us, we may not receive any future research funding or milestone or royalty payments under the collaboration. If we do not receive the funding we expect under these agreements, our development of our product candidates could be delayed and we may need additional resources to develop our product candidates. All of the risks relating to product development, regulatory approval and commercialization described in this annual report on Form 10-K also apply to the activities of our collaborators.

Additionally, subject to its contractual obligations to us, if a collaborator of ours were to be involved in a business combination, it might deemphasize or terminate the development or commercialization of any product candidate licensed to it by us. If one of our collaborators terminates its agreement with us, we may find it more difficult to attract new collaborators and our perception in the business and financial communities could be harmed.

If we are not able to establish additional collaborations, we may have to alter our development and commercialization plans and our business could be adversely affected.

For some of our product candidates, we may decide to collaborate with pharmaceutical, biotechnology and medical device companies for the development and potential commercialization of those product candidates. We face significant competition in seeking appropriate collaborators. Whether we reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed collaborator’s evaluation of a number of factors. Those factors may include the design or results of clinical trials, the likelihood of approval by the FDA or similar regulatory authorities outside the United States, the potential market for the product candidate, the costs and complexities of manufacturing and delivering a product candidate to patients, the potential of competing products, the existence of uncertainty with respect to our ownership of technology, which can exist if there is a challenge to such ownership without regard to the merits of the challenge, and industry and market conditions generally. The collaborator may also consider alternative product candidates or technologies for similar indications that may be available to collaborate on and whether such a collaboration could be more attractive than the one with us for our product candidate. We may also be restricted under future license agreements from entering into agreements on certain terms with potential collaborators. Collaborations are complex and time-consuming to negotiate and document. In addition, there have been a significant number of recent business combinations among large pharmaceutical companies that have resulted in a reduced number of potential future collaborators.

If we are unable to reach agreements with suitable collaborators on a timely basis, on acceptable terms or at all, we may have to curtail the development of a product candidate, reduce or delay its development program or one or more of our other development programs, delay its potential commercialization or reduce the scope of any sales or marketing activities, or increase our expenditures and undertake development or commercialization activities at our own expense. If we elect to fund and undertake development or commercialization activities on our own, we may need to obtain additional expertise and additional capital, which may not be available to us on acceptable terms or at all. If we fail to enter into collaborations and do not have sufficient funds or expertise to undertake the necessary development and commercialization activities, we may not be able to further develop our product candidates or bring them to market or continue to develop our product platform.

We have relied, and may continue to rely, on third parties for certain aspects of our clinical development, and those third parties may not perform satisfactorily, including failing to meet deadlines for the completion of such trials.

We have relied and may continue to rely on third parties, such as CROs to conduct clinical trials of GB-102 and other product candidates. If we deem necessary, we may engage CROs, clinical data management organizations, medical institutions and clinical investigators to conduct or assist in our clinical trials or other clinical development work. If we are unable to enter into an agreement with a service provider when required, our product development activities would be delayed.

Our reliance on third parties for development activities reduces our control over these activities but does not relieve us of our responsibilities. For example, we remain responsible for ensuring that each of our clinical trials is conducted in accordance with the general investigational plan and protocols for the trial. Moreover, the FDA requires us to comply with standards, commonly referred to as good clinical practices, or GCPs, for conducting, recording and reporting the results of clinical trials to assure that data and reported results are credible and accurate and that the rights, integrity and confidentiality of trial participants are protected. We are also required to register ongoing clinical trials and post the results of completed clinical trials on a government-sponsored database, ClinicalTrials.gov, within specified timeframes. Failure to do so can result in fines, adverse publicity and civil and criminal sanctions. If we engage third parties and they do not successfully carry out their contractual duties, meet expected deadlines or conduct our clinical trials in accordance with regulatory requirements or our stated protocols, we will not be able to obtain, or may be delayed in obtaining, marketing approvals for our product candidates and will not be able to, or may be delayed in our efforts to, successfully commercialize our product candidates.

Risks Related to Our Intellectual Property

If our patent position does not adequately protect our product candidates, others could compete against us more directly, which would harm our business.

We own and exclusively license a number of U.S. issued patents, pending U.S. provisional and non-provisional patent applications, as well as pending Patent Cooperating Treaty applications and associated foreign patents and patent applications. Our success depends in large part on our ability to obtain and maintain patent protection both in the United States and in other countries for our product candidates. Our ability to protect our product candidates from unauthorized or infringing use by third parties depends in substantial part on our ability to obtain and maintain valid and enforceable patents. Due to evolving legal standards relating to the patentability, validity and enforceability of patents covering pharmaceutical inventions and the scope of claims made under these patents, our ability to maintain, obtain and enforce patents is uncertain and involves complex legal and factual questions. Accordingly, rights under any issued patents may not provide us with sufficient protection for our product candidates or provide sufficient protection to afford us a commercial advantage against competitive products or processes. We cannot guarantee that any patents will issue from any pending or future patent applications owned by or licensed to us.

The patent prosecution process is expensive and time-consuming. We may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. We may choose not to seek patent protection for certain innovations and may choose not to pursue patent protection in certain jurisdictions. Under the laws of certain jurisdictions, patents or other intellectual property rights may be unavailable or limited in scope. It is also possible that we will fail to identify patentable aspects of our research and development before it is too late to obtain patent protection.

We currently solely own or exclusively license patents and patent applications that encompass our proposed clinical assets. We do not control the prosecution of the exclusively licensed patents and patent applications from Johns Hopkins University, or JHU, although we have input into the prosecution. In the future, we may choose to license additional patents or patent applications from third parties that we conclude are useful or necessary for our business goals. We may not have the right to control the preparation, filing, prosecution or maintenance of such additional licensed patent applications. Therefore, if we do license additional patents or patent applications in the future, these patents and applications may not be prosecuted and enforced in a manner consistent with the best interests of our business.

Patent applications in the United States are maintained in confidence for up to 18 months after their filing. In some cases, however, patent applications remain confidential in the U.S. Patent and Trademark Office, or PTO, for the entire time prior to issuance as a U.S. patent. Similarly, publication of discoveries in the scientific or patent literature often lags behind actual discoveries. Consequently, we cannot be certain that we or our licensors were the first to invent, or the first to file patent applications on, our product candidates or their intended uses. Furthermore, we may not have identified all U.S. and foreign patents or published applications that affect our business either by blocking our ability to commercialize our products or by covering similar technologies that affect our product market or patentability, or all prior art that could be considered relevant to our patent claims.

The claims of any patents which have already issued or may issue in the future and are owned by or licensed to us, may not confer on us significant commercial protection against competing products. Additionally, our patents may be challenged by third parties, resulting in the patent being deemed invalid, cancelled, unenforceable or narrowed in scope, or the third party may circumvent any such issued patents.

Our patents may be challenged, for example, in a U.S. federal court or alternatively challenged in an adversarial proceeding at the Patent Trial and Appeals Board, or PTAB, at the PTO, using an Inter Partes Review or Post Grant Review process. The cost of these procedures is often substantial, and it is possible that our efforts would be unsuccessful resulting in a loss of our U.S. patent position. Further, even if a U.S. federal court or PTAB rules that a patent owned by us is valid and enforceable, if the other venue takes a contrary position, the patent can be considered invalid and not enforceable.

Therefore, a party seeking to invalidate a patent owned by or licensed to us in the United States has the procedural advantage of two alternative venues. To date, the PTAB has cancelled over 60% of the patent claims it has reviewed and is considered to be a forum of choice for infringers for patent cancellation.

Also, our pending patent applications may not issue, and we may not receive any additional patents. Our patents might not contain claims that are sufficiently broad to prevent others from utilizing our technologies. For instance, GB-102 and GB-103 use our proprietary aggregating microparticle technologies to deliver sunitinib for ocular treatment. If a competitor develops a product that uses a different particle or non-particle technology to deliver sunitinib to the eye, it may be able to compete with us without infringing our owned or licensed patents after the patents on sunitinib expire in August 2021. GB-401 includes our proprietary beta-adrenergic blocking agent prodrug molecule in our proprietary aggregating microparticle technology. If a competitor develops a product that uses a different prodrug of the same beta-blocker, or the beta-blocker itself, or uses a delivery system that is different from our proprietary aggregating microparticle technologies, then it may be able to compete with our GB-401 product without infringing our owned or licensed patent claims. Consequently, our competitors may independently develop competing products that do not infringe our patents or other intellectual property. To the extent a competitor can develop similar products using a different delivery system, microparticle or molecule, our patents may not prevent them from directly competing with us.

The Leahy-Smith America Invents Act, or America Invents Act, was signed into law in September 2011, and many of the substantive changes became effective in March 2013. The America Invents Act revised U.S. patent law in part by changing the standard for patent approval from a “first to invent” standard to a “first to file” standard and developing a post-grant review system. This legislation changes U.S. patent law in a way that may weaken our ability to obtain patent protection in the United States for those applications filed after March 2013. For example, if we were the first to invent a new product or its use, but another party is the first to file a patent application on this invention, under the new law the other party may be entitled to the patent rights on the invention.

The America Invents Act created for the first time new procedures to challenge issued patents in the United States, including post-grant review and inter partes review proceedings, which some third parties have been using to cause the cancellation of selected or all claims of issued patents of competitors. For a patent with a priority date of March 16, 2013 or later, a petition for post-grant review can be filed by a third party in a nine-month window from issuance of the patent. A petition for inter partes review can be filed immediately following the issuance of a patent if the patent was filed prior to March 16, 2013. A petition for inter partes review can be filed after the nine-month period for filing a post-grant review petition has expired for a patent with a priority date of March 16, 2013 or later. Post-grant review proceedings can be brought on any ground of challenge, whereas inter partes review proceedings can only be brought to raise a challenge based on published prior art. These adversarial actions at the PTO review patent claims without the presumption of validity afforded to U.S. patents in lawsuits in U.S. federal courts and use a lower burden of proof than used in litigation in U.S. federal courts. The PTO issued a Final Rule on November 11, 2018, announcing that it will now use the same claim construction currently used in the U.S. federal courts to interpret patent claims, which is the plain and ordinary meaning of words used. If any of our patents are challenged by a third party in such a PTO proceeding, there is no guarantee that we or our licensors will be successful in defending the patent, which would result in a loss of the challenged patent right to us.

The U.S. Supreme Court has issued opinions in patent cases in the last few years that many consider may weaken patent protection in the United States, either by narrowing the scope of patent protection available in certain circumstances, holding that certain kinds of innovations are not patentable or generally otherwise making it easier to invalidate patents in court. Additionally, there have been recent proposals for additional changes to the patent laws of the United States and other countries that, if adopted, could impact our ability to obtain patent protection for our proprietary technology or our ability to enforce our proprietary technology. Depending on future actions by the U.S. Congress, the U.S. courts, the PTO and the relevant law-making bodies in other countries, the laws and regulations governing patents could change in unpredictable ways that would weaken our ability to obtain new patents or to enforce our existing patents and patents that we might obtain in the future.

The laws of some foreign jurisdictions do not protect intellectual property rights to the same extent as in the United States and many companies have encountered significant difficulties in protecting and defending such rights in foreign jurisdictions. If we encounter such difficulties in protecting or are otherwise precluded from effectively protecting our intellectual property rights in foreign jurisdictions, our business prospects could be substantially harmed. For example, we could become a party to foreign opposition proceedings, such as at the European Patent Office, or patent litigation and other proceedings in a foreign court. If so, uncertainties resulting from the initiation and continuation of such proceedings could have a material adverse effect on our ability to compete in the market-place. The cost of foreign adversarial proceedings can also be substantial, and in many foreign jurisdictions, the losing party must pay the attorney fees of the winning party.

Because of the extensive time required for development, testing and regulatory review of a potential product, it is possible that, before any of our product candidates can be commercialized, any related patent may expire or remain in force for only a short period following commercialization of our product candidates, thereby reducing any advantages of the patent. To the extent our product candidates based on that technology are not commercialized significantly ahead of the date of any applicable patent, or to the extent we have no other patent protection on such product candidates, those product candidates would not be protected by patents, and we would then rely solely on other forms of exclusivity, such as regulatory exclusivity provided by the FDCA or trade secret protection.

Patents filed by our licensor, Johns Hopkins University, may have been discovered through government funded programs and thus may be subject to federal regulations such as “march-in” rights, certain reporting requirements and a preference for U.S.-based companies. Compliance with such regulations may limit our exclusive rights, and limit our ability to contract with non-U.S. manufacturers.

Any patents licensed from JHU that cover inventions generated in whole or part through the use of U.S. government funding are subject to certain federal regulations. As a result, the U.S. government may have certain rights to licensed patents embodied in our current or future product candidates pursuant to the Bayh-Dole Act of 1980, or Bayh-Dole Act. These U.S. government rights in certain inventions developed under a government-funded program include a non-exclusive, non-transferable, irrevocable worldwide license to use inventions for any governmental purpose. In addition, the U.S. government has the right, under certain limited circumstances, to require JHU, and thus us, to grant exclusive, partially exclusive or non-exclusive licenses to any of these inventions to a third party if it determines that: (i) adequate steps have not been taken to commercialize the invention; (ii) government action is necessary to meet public health or safety needs; or (iii) government action is necessary to meet requirements for public use under federal regulations (also referred to as “march-in rights”). The U.S. government also has the right to take title to these inventions if JHU fails to disclose the invention to the government or fails to file an application to register the patents within specified time limits. Patents generated under a government-funded program are also subject to certain reporting requirements, compliance with which may require us to expend substantial resources. In addition, the U.S. government requires that any products embodying the subject invention or produced through the use of the subject invention be manufactured substantially in the United States. The manufacturing preference requirement can be waived if the owner of the intellectual property can show that reasonable but unsuccessful efforts have been made to grant licenses on similar terms to potential licensees that would be likely to manufacture substantially in the United States or that under the circumstances domestic manufacture is not commercially feasible. This preference for U.S. manufacturers may limit our ability to contract with non-U.S. product manufacturers for products covered by such intellectual property. To the extent any of our current or future intellectual property is generated through the use of U.S. government funding, the provisions of the Bayh-Dole Act may similarly apply.

Sunitinib, the active ingredient in certain of our product candidates, is currently expected to lose patent protection in 2021, as a result, new competitors with similar products or treatments may challenge our business.

Sunitinib, the active ingredient in both GB-102 and GB-103, is currently under patent protection by Pfizer in the United States until August 2021 and in the European Union until July 2021, subject to any extensions that Pfizer may obtain. Although we separately own or license patents or patent applications relating to GB-102 and GB-103 that will not expire until dates ranging from 2031 to 2039, it is possible that new competing products utilizing sunitinib will be introduced for ocular diseases that could compete with our product candidates. We do not currently expect to commercialize any of our product candidates until after the expiration of Pfizer’s patent protection. As a result, it is possible that other products may impair our ability to successfully commercialize our product candidates or gain market acceptance, which could adversely affect our business and operating results.

If we infringe or are alleged to infringe intellectual property rights of third parties, our business could be harmed.

Our research, development or commercialization activities, including any product candidates or products resulting from these activities, may infringe or be claimed to infringe patents or other proprietary rights owned by third parties and to which we do not hold licenses or other rights. We may not be aware of third-party patents that a third party might assert against us. For example, there may be third-party applications that have been filed but not published that, if issued, could be asserted against us. If a patent infringement suit were brought against us, we could be forced to stop or delay research, development, manufacturing or sales of the product or product candidate that is the subject of the suit. Further, if we are found to have infringed a third-party patent, we could be obligated to pay

royalties and/or other payments to the third party for the sale of our product, which may be substantial, or we could be enjoined from selling our product. We could also incur substantial litigation costs.

Litigation regarding patents, intellectual property and other proprietary rights may be expensive and time-consuming. If we are involved in such litigation, it could cause delays in bringing product candidates to market and harm our ability to operate.

Our success will depend in part on our ability to operate without infringing the proprietary rights of third parties. Although we are not currently aware of any litigation or other proceedings or third-party claims of patent infringement against us related to our product candidates, the pharmaceutical industry is characterized by extensive litigation regarding patents and other intellectual property rights. Other parties may obtain patents in the future and allege that the use of our technologies infringes these patent claims or that we are employing their proprietary technology without authorization. Likewise, third parties may challenge or infringe upon our existing or future patents. Proceedings involving our patents or patent applications or those of others could result in adverse decisions regarding:

• the patentability of our inventions relating to our product candidates; and/or

Even if we are successful in these proceedings, we may incur substantial costs and divert management time and attention in pursuing these proceedings, which could have a material adverse effect on us. If we are unable to avoid infringing the patent rights of others, we may be required to seek a license, defend an infringement action or challenge the validity of the patents in court. Patent litigation is costly and time consuming. We may not have sufficient resources to bring these actions to a successful conclusion. In addition, if we do not obtain a license,

develop or obtain non-infringing technology, fail to defend an infringement action successfully or have infringed patents declared invalid, we may:

• incur substantial monetary damages;

Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. In addition, during the course of this kind of litigation, there could be public announcements of the results of hearings, motions or other interim proceedings or developments. If investors perceive these results to be negative, the market price for our common stock could be significantly harmed.

Because our clinical candidates incorporate small molecules, after commercialization they will be subject in the United States to the patent litigation process of the Hatch-Waxman Amendments, which allows a generic company to submit an Abbreviated New Drug Application, or ANDA, to the FDA to obtain approval to sell our drug using bioequivalence data only. Under the Hatch-Waxman Amendments, we will have the opportunity to list all of our patents that cover our drug product or its method of use in the FDA’s compendium of “Approved Drug Products with Therapeutic Equivalence Evaluation,” sometimes referred to as the FDA’s Orange Book. Currently, in the United States, the FDA may grant three years of exclusivity to a new formulation, for which our GB-102 and GB-103 products would qualify, and other changes to a drug, such as the addition of a new indication to the package insert, if the application contains reports of new clinical investigations (other than bioavailability studies) conducted or sponsored by the sponsor that were essential to the approval of the application. The FDA also may grant five years of exclusivity for new chemical entities, or NCEs, for which GB-401 would qualify. An NCE is a drug that contains no active moiety that has been approved by the FDA in any other NDA. A generic company can submit an ANDA to the FDA immediately after FDA approval of our GB-102 and GB-103 products and four years after approval of GB-401. The submission of the ANDA by a generic company is considered a technical act of patent infringement. The generic company can certify that it will wait until the natural expiration date of our listed patents to sell a generic version of our product or can certify that one or more of our listed patents are invalid, unenforceable or not infringed. If the latter, we will have 45 days to bring a patent infringement lawsuit against the generic company. This will initiate a challenge to one or more of our Orange Book listed patents based on arguments from the generic company that either our patent is invalid, unenforceable or not infringed. Under the Hatch-Waxman Amendments, if a lawsuit is brought, the FDA is prevented from issuing a final approval on the generic drug until 30 months after the end of the data exclusivity period, or a final decision of a court holding that our asserted patent claims are invalid, unenforceable or not infringed. If we do not properly list our relevant patents in the Orange Book, or timely file a lawsuit in response to a certification from a generic company under an ANDA, or if we do not prevail in the resulting patent litigation, we can lose our proprietary market, which can rapidly become generic. Further, even if we do correctly list our relevant patents in the Orange Book, bring a lawsuit in a timely manner and prevail in that lawsuit, it may be at a very significant cost to us of attorneys’ fees and employee time and distraction over a long period. Further, it is common for more than one generic company to try to sell an innovator drug at the same time, and so we may be faced with the cost and distraction of multiple lawsuits. We may also determine it is necessary

to settle the lawsuit in a manner that allows the generic company to enter our market prior to the expiration of our patent or otherwise in a manner that adversely affects the strength, validity or enforceability of our patent.

A number of pharmaceutical companies have been the subject of intense review by the U.S. Federal Trade Commission or a corresponding agency in another country based on how they have conducted or settled drug patent litigation, and certain reviews have led to an allegation of an anti-trust violation, sometimes resulting in a fine or loss of rights. We cannot be sure that we would not also be subject to such a review or that the result of the review would be favorable to us, which could result in a fine or penalty.

The U.S. Federal Trade Commission, or FTC, has brought a number of lawsuits in federal court in the past few years to challenge Hatch-Waxman ANDA litigation settlements between innovator companies and generic companies as anti-competitive. The FTC has taken an aggressive position that anything of value is a payment, whether money is paid or not. Under their approach, if an innovator as part of a patent settlement agrees not to launch or delay launch of an authorized generic during the 180-day period granted to the first generic company to challenge an Orange Book listed patent covering an innovator drug, or negotiates a delay in entry without payment, the FTC may consider it an unacceptable reverse payment. The biopharmaceutical industry has argued that such agreements are rational business decisions to dismiss risk and are immune from antitrust attack if the terms of the settlement are within the scope of the exclusionary potential of the patent. In 2013, the U.S. Supreme Court, in a five-to-three decision in FTC v. Actavis, Inc. rejected both the biopharmaceutical industry’s and the FTC’s arguments with regard to so-called reverse payments, and held that whether a “reverse payment” settlement involving the exchange of consideration for a delay in entry is subject to an anticompetitive analysis depends on five considerations: (a) the potential for genuine adverse effects on competition; (b) the justification of payment; (c) the patentee’s ability to bring about anticompetitive harm; (d) whether the size of the payment is a workable surrogate for the patent’s weakness; and (e) that antitrust liability for large unjustified payments does not prevent litigating parties from settling their lawsuits, for example, by allowing the generic to enter the market before the patent expires without the patentee’s paying the generic. Furthermore, whether a reverse payment is justified depends upon its size, its scale in relation to the patentee’s anticipated future litigation costs, its independence from other services for which it might represent payment, as was the case in Actavis, and the lack of any other convincing justification. The Court held that reverse payment settlements can potentially violate antitrust laws and are subject to the standard antitrust rule-of-reason analysis, with the burden of proving that an agreement is unlawful on the FTC and leaving to lower courts the structuring of such rule of reason analysis. If we are faced with drug patent litigation, including Hatch-Waxman litigation with a generic company, we could be faced with such an FTC challenge based on that activity, including how or whether we settle the case, and even if we strongly disagree with the FTC’s position, we could face a significant expense or penalty.

We may not be able to enforce our intellectual property rights throughout the world.

Filing, prosecuting and defending patents on our product candidates in all countries throughout the world would be prohibitively expensive. The requirements for patentability may differ in certain countries, particularly in developing countries. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and, further, may export otherwise infringing products to territories where we may obtain patent protection, but where patent enforcement is not as strong as that in the United States. These products may compete with our products in jurisdictions where we do not have any issued or licensed patents and any future patent claims or other intellectual property rights may not be effective or sufficient to prevent them from so competing.

Moreover, our ability to protect and enforce our intellectual property rights may be adversely affected by changes in foreign intellectual property laws. Additionally, laws of some countries outside of the United States and Europe do not afford intellectual property protection to the same extent as the laws of the United States and Europe. Many companies have encountered significant problems in protecting and defending intellectual property rights in certain foreign jurisdictions. The legal systems of some countries, including India, China and other developing countries, may not favor the enforcement of our patents and other intellectual property rights.

This could make it difficult for us to stop the infringement of our patents or the misappropriation of our other intellectual property rights in certain foreign countries. A number of foreign countries have stated that they are willing to issue compulsory licenses to patents held by innovator companies on approved drugs to allow the government or one or more third-party companies to sell the approved drug without the permission of the innovator patentee where the foreign government concludes it is in the public interest. India, for example, has used such a procedure to allow domestic companies to make and sell patented drugs without innovator approval. There is no guarantee that patents covering any of our drugs will not be subject to a compulsory license in a foreign country, or that we will have any influence over if or how such a compulsory license is granted. Further, Brazil allows its regulatory agency ANVISA to participate in deciding whether to grant a drug patent in Brazil, and patent grant decisions are made based on several factors, including whether the patent meets the requirements for a patent and whether such a patent is deemed in the country’s interest. In addition, several other countries have created laws that make it more difficult to enforce drug patents than patents on other kinds of technologies. Further, under the treaty on the Trade-Related Aspects of Intellectual Property, or TRIPS, as interpreted by the Doha Declaration, countries in which drugs are manufactured are required to allow exportation of the drug to a developing country that lacks adequate manufacturing capability. Therefore, our drug markets in the United States or foreign countries may be affected by the influence of current public policy on patent issuance, enforcement or involuntary licensing in the healthcare area.

In addition, in November 2015, members of the World Trade Organization, or WTO, which administers TRIPS, voted to extend the exemption against enforcing pharmaceutical drug patents in least developed countries until 2033. We currently have no patent applications filed in least developed countries, and our current intent is not to file in these countries in the future, at least in part due to this WTO pharmaceutical patent exemption.

Obtaining and maintaining our patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

Periodic maintenance fees, renewal fees, annuity fees and various other governmental fees on patents and/or applications will be due to be paid to the PTO and various governmental patent agencies outside of the United States in several stages over the lifetime of the patents and/or applications. We have systems in place to remind us to pay these fees, and we employ an outside firm and rely on our outside counsel to pay these fees due to non-U.S. patent agencies. We employ reputable law firms and other professionals to help us comply, and in many cases, an inadvertent lapse can be cured by payment of a late fee or by other means in accordance with the applicable rules. However, there are situations in which non-compliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, our competitors might be able to enter the market and this circumstance would have a material adverse effect on our business.

We rely on our ability to stop others from competing by enforcing our patents; however, some jurisdictions may require us to grant licenses to third parties. Such compulsory licenses could be extended to include some of our product candidates, which may limit our potential revenue opportunities.

Many foreign countries have compulsory licensing laws under which a patent owner must grant licenses to third parties, in certain circumstances. For example, compulsory licensing, or the threat of compulsory licensing, of life-saving products and expensive products is becoming increasingly popular in developing countries, either through direct legislation or international initiatives. Compulsory licenses could be extended to include some of our product candidates, if they receive marketing approval, which may limit our potential revenue opportunities. Consequently, we may not be able to prevent third parties from practicing our inventions in certain countries outside the United States and Europe. Competitors may also use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and, further, may export otherwise infringing products to territories where we have patent protection, if our ability to enforce our patents to stop infringing activities is inadequate. These products may compete with our products, and our patents or other intellectual property rights may not be effective or sufficient to prevent them from competing. Proceedings to enforce our patent rights in foreign jurisdictions, whether or not successful, could result in substantial costs and divert our efforts and resources from other aspects of our business. Furthermore, while we intend to protect our intellectual property rights in major markets for our products where such patent rights exist, we cannot ensure that we will be able to initiate or maintain similar efforts in all jurisdictions in which we may wish to market our products. Accordingly, our efforts to protect our intellectual property rights in such countries may be inadequate.

In addition, some countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may be limited to monetary relief and may be unable to enjoin infringement if a government is the infringer, which could materially diminish the value of the patent.

If we fail to comply with our obligations under the license agreement with JHU, we could lose license rights that are necessary for developing and commercializing our clinical assets.

Our exclusive license with JHU for technology relating to our clinical assets imposes various development, commercialization, royalty payment, diligence and other obligations on us. Specifically, we are required to:

• pay JHU a minimum royalty fee and potential milestone payments;

• use commercially reasonable efforts to bring products to market;

• provide royalty reports to JHU; and

• indemnify JHU against certain claims and maintain insurance coverage.

If we breach any of these obligations, JHU may have the right to terminate the license, which would result in our being unable to develop, manufacture and sell products that are covered by the licensed technology, or in a competitor’s gaining access to the licensed technology.

The rights we rely upon to protect our unpatented trade secrets may be inadequate.

We rely on unpatented trade secrets, know-how and technology, which are difficult to protect, especially in the pharmaceutical industry, where much of the information about a product must be made public during the regulatory approval process. We seek to protect trade secrets, in part, by entering into confidentiality agreements with employees, consultants and others. These parties may breach or terminate these agreements or may refuse to enter into such agreements with us, and we may not have adequate remedies for such breaches. Furthermore, these agreements may not provide meaningful protection for our trade secrets or other proprietary information or result in the effective assignment to us of intellectual property and may not provide an adequate remedy in the event of unauthorized use or disclosure of confidential information or other breaches of the agreements. Despite our efforts to protect our trade secrets, we or our collaboration partners, board members, employees, consultants, contractors or scientific and other advisors may unintentionally or willfully disclose our proprietary information to competitors.

If we fail to maintain trade secret protection, our competitive position may be adversely affected. Competitors may also independently discover our trade secrets. Enforcement of claims that a third party has illegally obtained and is using trade secrets is expensive, time consuming and uncertain. If our competitors independently develop equivalent knowledge, methods and know-how, we would not be able to assert our trade secrets against them and our business could be harmed.

Confidentiality agreements with employees and others may not adequately prevent disclosure of trade secrets and other proprietary information and may not adequately protect our intellectual property.

We rely on trade secrets to protect our technology, especially where we do not believe patent protection is appropriate or obtainable. However, trade secrets are difficult to protect. To protect our proprietary technology and processes, we also rely in part on confidentiality and intellectual property assignment agreements with our corporate partners, employees, consultants, outside scientific collaborators and sponsored researchers and other advisors. These agreements may not effectively prevent disclosure of confidential information nor result in the effective assignment to us of intellectual property and may not provide an adequate remedy in the event of unauthorized disclosure of confidential information or other breaches of the agreements. In addition, others may independently discover our trade secrets and proprietary information, and in such case, we could not assert any trade secret rights against such party. Enforcing a claim that a party illegally obtained and is using our trade secrets is difficult, expensive and time consuming, and the outcome is unpredictable. In addition, courts outside the United States may be less willing to protect trade secrets. Costly and time-consuming litigation could be necessary to seek to enforce and determine the scope of our proprietary rights, and failure to obtain or maintain trade secret protection could adversely affect our competitive business position.

Risks Related to Regulatory Approval of Our Product Candidates and Other Legal Compliance Matters

We may be required, or choose, to suspend, repeat or terminate our clinical trials if they are not conducted in accordance with regulatory requirements, the results are negative or inconclusive, the trials are not well-designed, or research participants experience adverse safety outcomes.

Regulatory agencies, institutional review boards, or IRBs, or data safety monitoring boards may at any time recommend the temporary or permanent discontinuation of our clinical trials or request that we cease using investigators in the clinical trials if they believe that the clinical trials are not being conducted in accordance with applicable regulatory requirements, or that they present an unacceptable safety risk to participants. Clinical trials must be conducted in accordance with GCPs and other applicable foreign regulatory authority guidelines. Clinical trials are subject to oversight by the FDA, foreign regulatory authorities and IRBs at the study sites where the clinical trials are conducted. In addition, clinical trials must be conducted with product candidates produced in accordance with applicable current good manufacturing practices. Clinical trials may be placed on a full or partial clinical hold by the FDA, foreign regulatory authorities, or us for various reasons, including, but not limited to: deficiencies in the conduct of the clinical trials, including failure to conduct the clinical trial in accordance with regulatory requirements or clinical protocols; deficiencies in the clinical trial operations or trial sites; deficiencies in the trial designs necessary to demonstrate efficacy; fatalities or other AEs arising during a clinical trial due to medical problems that may or may not be related to clinical trial treatments; the product candidates may not appear to be more effective than current therapies; or the quality or stability of the product candidates may fall below acceptable standards.

Although we have never been asked by a regulatory agency, IRB or data safety monitoring board to temporarily or permanently discontinue a clinical trial, if we elect or are forced to suspend or terminate a clinical trial of any of our current or future product candidates, the commercial prospects for that product may be harmed and our ability to generate product revenue from that product may be delayed or eliminated. Furthermore, any of these events could prevent us or our partners from achieving or maintaining market acceptance of the affected product and could substantially increase the costs of commercializing our product candidates and impair our ability to generate revenue from the commercialization of these products either by us or by our collaboration partners. In our Phase 2a trial of GB-102 for the treatment of ME secondary to DME or RVO, 16 of the 21 patients had at least one drug-related AE, with the majority of them in the 2 mg dosing arm. In addition, one patient in the 2 mg dosing arm experienced two ocular SAEs. As a result, we decided to pause enrollment of new patients in our Phase 2b wet AMD trial until we could collect more data on the Phase 2a trial. We subsequently conducted an interim safety analysis which led to the selection of the 1 mg dose for GB-102. As a result, we amended the Phase 2b protocol such that all patients having originally received the 2mg dose of GB-102 received the 1 mg dose as their repeat therapy at their six-month visit.

Any additional SAEs could result in the FDA delaying our clinical trials or denying or delaying clearance or approval of a product. Even though an AE may not be the result of the failure of our drug candidate, the FDA or an IRB could delay or halt a clinical trial for an indefinite period of time while an AE is reviewed, and likely would do so in the event of multiple such events. Any delay or termination of our current or future clinical trials as a result of the risks summarized above, including delays in obtaining or maintaining required approvals from IRBs, delays in patient enrollment, the failure of patients to continue to participate in a clinical trial, and delays or termination of clinical trials as a result of protocol modifications or AEs during the trials, may cause an increase in costs and delays in the submission of any New Drug Applications, or NDAs, to the FDA, delay the approval and commercialization of our products or result in the failure of the clinical trial, which could adversely affect our business, operating results and prospects. Lengthy delays in the completion of clinical trials of our products would adversely affect our business and prospects and could cause us to cease operations.

If preliminary data demonstrate that any of our product candidates has an unfavorable safety profile and is unlikely to receive regulatory approval or be successfully commercialized, we may voluntarily suspend or terminate future development of such product candidate. Any one or a combination of these events could prevent us from obtaining approval and achieving or maintaining market acceptance of the affected product or could substantially increase the costs and expenses of commercializing the product candidate, which in turn could delay or prevent us from generating significant revenues from the sale of the product.

If we are not able to obtain required regulatory approvals, we will not be able to commercialize our product candidates and our ability to generate significant revenue will be materially impaired. The regulatory approval process is expensive, time-consuming and uncertain. As a result, we cannot predict when or if we, or any collaborators we may have in the future, will obtain regulatory approval to commercialize our product candidates.

The activities associated with the development of our product candidates, including design, testing, manufacture, safety, efficacy, recordkeeping, labeling, storage, approval, advertising, promotion, sale and distribution, are subject to comprehensive regulation by the FDA and other regulatory agencies in the United States and by the EMA and similar regulatory authorities outside the United States. Failure to obtain regulatory approval for a product candidate will prevent us from commercializing a product candidate. We have not submitted for approval to market GB-102 or any other product candidate.

The process of obtaining regulatory approvals, both in the United States and abroad, is expensive and may take many years, especially if additional clinical trials are required, if approval is obtained at all. Securing regulatory approval requires the submission of extensive preclinical and clinical data and supporting information to regulatory authorities for each therapeutic indication to establish the product candidate’s safety and purity. The FDA’s and other regulatory agencies’ decision to grant us regulatory approval will depend on our ability to demonstrate with substantial clinical evidence through adequate well-controlled clinical trials, that the product candidates are effective, as measured statistically by comparing the overall improvement in actively-treated patients against improvement in the control group. However, there is a possibility that our data may fail to show a statistically significant difference from the placebo control or the active control. Alternatively, there is a possibility that our data may be statistically significant, but that the actual clinical benefit of the product candidates may not be considered to be clinically significant, clinically relevant or clinically meaningful. We cannot predict whether the regulatory agencies will find that our clinical trial results provide compelling data. Even if we believe that the data from our trials will support regulatory approval in the United States or in Europe, we cannot predict whether the agencies will agree with our analysis and approve our applications.

Securing regulatory approval also requires the submission of information about the product manufacturing process to, and inspection of manufacturing facilities by, the regulatory authorities. The FDA, the EMA or other regulatory authorities may determine that our product candidates are not safe or effective, are only moderately effective or have undesirable or unintended side effects, toxicities or other characteristics that preclude our obtaining regulatory approval or prevent or limit commercial use. In addition, while we have had general discussions with the FDA concerning the design of some of our clinical trials, we have not discussed with the FDA the specifics of the regulatory pathways for our product candidates. Any regulatory approval we ultimately obtain may be limited or subject to restrictions or post-approval commitments that render the approved product not commercially viable.

Approval of our product candidates may be delayed or refused for many reasons, including the following:

Even if our product candidates meet their safety and efficacy endpoints in clinical trials, the regulatory authorities may not complete their review processes in a timely manner, or we may not be able to obtain regulatory approval. Additional delays may result if an FDA Advisory Committee or other regulatory authority recommends non-approval or restrictions on approval. In addition, we may experience delays or rejections based upon additional government regulation from future legislation or administrative action, or changes in regulatory authority policy during the period of product development, clinical trials and the review process.

The regulatory process can vary substantially based upon a variety of factors, including the type, complexity and novelty of the product candidates involved. If we experience delays in obtaining approval, the commercial prospects for our product candidates may be harmed and our ability to generate revenues will be materially impaired.

Failure to obtain regulatory approval in international jurisdictions would prevent our product candidates from being marketed abroad.

In order to market and sell our product candidates in the European Union and many other jurisdictions, we or our third-party collaborators must obtain separate regulatory approvals and comply with numerous and varying regulatory requirements. The approval procedure varies among countries and can involve additional testing. The time required to obtain approval may differ substantially from that required to obtain FDA approval. The regulatory approval process outside the United States generally includes all of the risks associated with obtaining FDA approval. In addition, in many countries outside the United States, it is required that the product be approved for reimbursement before the product can be sold in that country. We or our collaborators may not obtain approvals from regulatory authorities outside the United States on a timely basis, if at all. Approval by the FDA does not ensure approval by regulatory authorities in other countries or jurisdictions, and approval by one regulatory authority outside the United States does not ensure approval by regulatory authorities in other countries or jurisdictions or by the FDA. However, a failure or delay in obtaining regulatory approval in one country may have a negative effect on the regulatory process in other countries. We may not be able to file for regulatory approvals and may not receive necessary approvals to commercialize our products in any market.

Additionally, on June 23, 2016, the electorate in the United Kingdom voted in favor of leaving the European Union, commonly referred to as Brexit. Following protracted negotiations, the United Kingdom left the European Union on January 31, 2020.. The United Kingdom and European Union entered into the Trade and Cooperation Agreement, effective January 1, 2021, which seeks to resolve some of the outstanding issues related to Brexit, including free trade and an overarching governance structure for business conducted between the jurisdictions. Under the Trade and Cooperation Agreement, there is a transition period of at least four (and up to six) months where the U.K. is not designated as a “third country” and, as a result, personal data can flow from the EU to the U.K. without any adequacy mechanisms (e.g., Standard Contractual Clauses, etc.). Further, during the transition period, the European Commission will be preparing its adequacy decision for the UK. The transition period will automatically terminate if the U.K. adequacy decision is adopted prior to the transition period ending. Because this Trade and Cooperation Agreement is still new, and the transition period may change, it is unclear how it may affect the regulatory framework for our products. Since the regulatory framework for pharmaceutical products in the United Kingdom covering quality, safety, and efficacy of pharmaceutical products, clinical trials, marketing authorization, commercial sales and distribution of pharmaceutical products is derived from European Union directives and regulations, Brexit could materially impact the future regulatory regime that applies to products and the approval of product candidates in the United Kingdom. Any delay in obtaining, or an inability to obtain, any marketing approvals, as a result of Brexit or otherwise, may force us to restrict or delay efforts to seek regulatory approval in the United Kingdom for our product candidates, which could significantly and materially harm our business.

Since the regulatory framework for pharmaceutical products in the United Kingdom covering quality, safety, and efficacy of pharmaceutical products, clinical trials, marketing authorization, commercial sales and distribution of pharmaceutical products is derived from European Union directives and regulations, Brexit could materially impact the future regulatory regime that applies to products

and the approval of product candidates in the United Kingdom. Any delay in obtaining, or an inability to obtain, any marketing approvals, as a result of Brexit or otherwise, may force us to restrict or delay efforts to seek regulatory approval in the United Kingdom for our product candidates, which could significantly and materially harm our business.

The terms of approvals, ongoing regulations and post-marketing restrictions for our products may limit how we manufacture and market our products, which could materially impair our ability to generate revenue.

Once regulatory approval has been granted, an approved product and its manufacturer and marketer are subject to ongoing review and extensive regulation. We, and any collaborators we may have in the future, must therefore comply with requirements concerning advertising and promotion for any of our products for which we or our collaborators obtain regulatory approval. Promotional communications with respect to drug products and medical devices are subject to a variety of legal and regulatory restrictions and must be consistent with the information in the product’s approved labeling. Thus, if any of our product candidates receives regulatory approval, the accompanying approved labeling may limit the promotion of our product, which could limit sales of the product.

In addition, manufacturers of approved products and those manufacturers’ facilities are required to comply with extensive FDA requirements, including ensuring that quality control and manufacturing procedures conform to current good manufacturing practices applicable to drug manufacturers or quality assurance standards applicable to medical device manufacturers, which include requirements relating to quality control and quality assurance as well as the corresponding maintenance of records and documentation and reporting requirements. We, any CMOs we may engage in the future, our future collaborators and their CMOs will also be subject to other regulatory requirements, including submissions of safety and other post-marketing information and reports, registration and listing requirements, requirements regarding the distribution of samples to physicians, recordkeeping and costly post-marketing studies or clinical trials and surveillance to monitor the safety or efficacy of the product such as the requirement to implement a risk evaluation and mitigation strategy.

If any of our product candidates receives regulatory approval and we or others later identify undesirable side effects caused by the product, our ability to market and derive revenue from the products could be compromised.

In the event any of our product candidates receive regulatory approval and we or others identify undesirable side effects, AEs or other problems caused by one of our products, any of the following adverse events could occur, which could result in the loss of significant revenue to us and materially and adversely affect our operating results and business:

• the product may become less competitive and sales may decrease; and

• our reputation may suffer both among clinicians and patients.

Any of these events could have a material and adverse effect on our operations and business. The commercial prospects for our product candidates may be harmed and our ability to generate revenues will be materially impaired.

If our product candidates receive regulatory approval, we will also be subject to ongoing FDA obligations and continued regulatory review, such as continued safety reporting requirements, and we may also be subject to additional FDA post-marketing obligations or new regulations, all of which may result in significant expense and limit our ability to commercialize our drugs.

Any regulatory approvals that we receive for our product candidates will require surveillance to monitor the safety and efficacy of the product candidate and may require us to conduct post-approval clinical studies. The FDA has significant post-market authority, including the authority to require labeling changes based on new safety information and to require post-market studies or clinical trials to evaluate safety risks related to the use of a product or to require withdrawal of the product from the market. The manufacturing facilities used to manufacture our product candidates will also be subject to periodic review and inspection by the FDA and other regulatory agencies, including for continued compliance with current good manufacturing practices requirements. The discovery of any new or previously unknown problems with our third-party manufacturers, manufacturing processes or facilities may result in restrictions on the product, manufacturer or facility, including withdrawal of the product from the market. Any product promotion and advertising will also be subject to regulatory requirements and continuing regulatory review. The FDA imposes stringent restrictions on manufacturers’ communications regarding use of their products. If we promote our product candidates in a manner inconsistent with FDA-approved labeling or otherwise not in compliance with FDA regulations, we may be subject to enforcement action.

In addition, if the FDA or a foreign regulatory authority approves our product candidates, the manufacturing processes, labeling, packaging, distribution, AE reporting, storage, advertising, promotion, import, export and recordkeeping for our product candidates will be subject to extensive and ongoing regulatory requirements. These requirements include submissions of safety and other post-marketing information and reports, registration, as well as continued compliance with current good manufacturing practices and GCPs, for any clinical trials that we conduct post-approval.

Moreover, if we obtain regulatory approval for our product candidates, we will only be permitted to market our products for the indication approved by the FDA or foreign regulatory authority, and such approval may involve limitations on the indicated uses or promotional claims we may make for our products, or otherwise not permit labeling that sufficiently differentiates our product candidates from competitive products with comparable therapeutic profiles. For example, we will not be able to claim that our products have fewer side effects, or improve compliance or efficacy as compared to other drugs unless we can demonstrate those attributes to the FDA or foreign regulatory authority in comparative clinical trials.

If we or our CMOs or service providers fail to comply with applicable continuing regulatory requirements in the United States or foreign jurisdictions in which we seek to market our products, we or they may be subject to, among other things, fines, warning or untitled letters, holds on clinical trials, delay of approval or refusal by the FDA or similar foreign regulatory bodies to approve pending applications or supplements to approved applications, suspension or withdrawal of regulatory approval, product recalls and seizures, administrative detention of products, refusal to permit the import or export of products, operating restrictions, injunction, civil penalties and criminal prosecution.

The FDA’s and foreign regulatory authorities’ policies may change, and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our product candidates. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any regulatory approval that we may have obtained, and we may not achieve or sustain profitability.

We may be subject to substantial penalties if we fail to comply with regulatory requirements or if we experience unanticipated problems with our products.

Violations of the FDCA relating to the promotion or manufacturing of drug products may lead to investigations by the FDA, the Department of Justice and state Attorneys General alleging violations of federal and state healthcare fraud and abuse laws, as well as state consumer protection laws. In addition, later discovery of previously unknown AEs or other problems with our products, manufacturers or manufacturing processes, or failure to comply with regulatory requirements, may yield various results, including:

• restrictions on such products, manufacturers or manufacturing processes;

• restrictions on the labeling or marketing of a product;

• restrictions on product distribution or use;

• requirements to conduct post-marketing studies or clinical trials;

• warning or untitled letters;

• withdrawal of the products from the market;

• recall of products;

• fines, restitution or disgorgement of profits or revenues;

• suspension or withdrawal of regulatory approvals;

• refusal to permit the import or export of our products;

• product seizure or detention; or

• injunctions or the imposition of civil or criminal penalties.

Non-compliance with European Union requirements regarding safety monitoring or pharmacovigilance, and with requirements related to the development of products for the pediatric population, can also result in significant financial penalties.

If the FDA does not conclude that our product candidates satisfy the requirements for the Section 505(b)(2) regulatory approval pathway, or if the requirements for such product candidates under Section 505(b)(2) are not as we expect, the approval pathway for those product candidates will likely take significantly longer, cost significantly more and entail significantly greater complications and risks than anticipated, and in either case may not be successful.

We plan to seek FDA approval through the Section 505(b)(2) regulatory pathway for each of our current product candidates. The Hatch-Waxman Amendments added Section 505(b)(2) to the FDCA. Section 505(b)(2) permits the submission of an NDA where at least some of the information required for approval comes from studies that were not conducted by or for the applicant and for which the applicant has not obtained a right of reference. Section 505(b)(2), if applicable to us under the FDCA, would allow an NDA to rely in part on data in the public domain or the FDA’s prior conclusions regarding the safety and effectiveness of approved drug products, which could expedite the development program for our product candidates by potentially decreasing the amount of preclinical or clinical data that we would need to generate in order to obtain FDA approval. For GB-102 and GB-103, we are seeking to rely on the FDA’s prior conclusions regarding the safety and effectiveness of sunitinib, which has previously been approved for the treatment of gastrointestinal stromal tumors, advanced renal cell carcinoma, and a certain type of pancreatic cancer. For GB-401, we intend to rely in part on the FDA’s prior findings for the previously approved active pharmaceutical ingredient, or API, as well as relevant publications, and to conduct additional good laboratory practice, or GLP, toxicology studies with GB-401, to support the GB-401 IND and any future 505(b)(2) NDA.

If we cannot pursue the Section 505(b)(2) regulatory pathway, we may need to conduct additional clinical trials, provide additional data and information, and meet additional standards for regulatory approval. If this were to occur, the time and financial resources required to obtain FDA approval for these product candidates, and complications and risks associated with these product candidates, would likely substantially increase.

Moreover, our inability to pursue the Section 505(b)(2) regulatory pathway would likely result in new competitive products reaching the market more quickly than GB-102, GB-103 or GB-401, which would likely adversely impact our competitive position and prospects. Even if we can pursue the Section 505(b)(2) regulatory pathway, we cannot assure you that GB-102, GB-103 or GB-401 will receive the requisite approvals for commercialization.

In addition, notwithstanding the approval of products by the FDA under Section 505(b)(2), certain pharmaceutical companies and others have objected to the FDA’s interpretation of Section 505(b)(2). If the FDA’s interpretation of Section 505(b)(2) is successfully challenged, the FDA may change its 505(b)(2) policies and practices, which could delay or even prevent the FDA from approving any NDA that we submit under Section 505(b)(2). In addition, the pharmaceutical industry is highly competitive, and Section 505(b)(2) NDAs are subject to special requirements designed to protect the patent rights of sponsors of previously approved drugs that are referenced in a Section 505(b)(2) NDA. These requirements may give rise to patent litigation and mandatory delays in approval of our NDAs for up to 30 months or longer depending on the outcome of any litigation. It is not uncommon for the owner of the NDA of an approved product to file a citizen petition with the FDA seeking to delay approval of, or impose additional approval requirements for, pending competing products. If successful, such petitions could significantly delay, or even prevent, the approval of a new product. However, even if the FDA ultimately denies such a petition, the FDA may substantially delay approval while it considers and responds to the petition. In addition, even if we are able to utilize the Section 505(b)(2) regulatory pathway, there is no guarantee this would ultimately lead to earlier approval.

Moreover, even if our product candidates are approved under Section 505(b)(2), the approval may be subject to limitations on the indicated uses for which the products may be marketed or to other conditions of approval, or may contain requirements for costly post-marketing testing and surveillance to monitor the safety or efficacy of the products.

Our relationships with customers and third-party payors may be subject, directly or indirectly, to applicable anti-kickback, fraud and abuse, false claims, transparency, health information privacy and security, and other healthcare laws and regulations, which could expose us to criminal sanctions, civil penalties, contractual damages, reputational harm, administrative burdens and diminished profits and future earnings.

CALC US Equity

CALC · 10-K · period ended 2020-12-31

Item 1A. Risk Factors.

CALC US Equity☆

CALC · 10-K · period ended 2020-12-31

Item 1A. Risk Factors.

CALC US Equity