BHE · Read the filing

10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2021

For the transition period fromto

Commission File Number 1-10560

BENCHMARK ELECTRONICS, INC.

(Exact name of registrant as specified in its charter)

(State or other jurisdiction of (I.R.S. Employer

incorporation or organization) Identification Number)

56 South Rockford Drive

Tempe, Arizona85281

(623) 300-7000

(Address, including zip code, and telephone number, including area code, of principal executive offices)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class Trading Symbol Name of each exchange on which registered

Common Stock, par value $0.10 per share BHE The New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☑ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☑ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☑ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and "emerging growth company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☑ Accelerated filer ☐

Non-accelerated filer ☐ Smaller reporting company ☐

Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☑

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b–2 of the Act). Yes ☐ No ☑

As of June 30, 2021, the number of outstanding common shares was 35,565,789. As of such date, the aggregate market value of the common shares held by non-affiliates, based on the closing price of the common shares on the New York Stock Exchange on such date, was approximately $1.0 billion.

As of February 23, 2022, there were 35,198,317 common shares of Benchmark Electronics, Inc., par value $0.10 per share, outstanding.

Documents Incorporated by Reference:

Portions of the registrant's Proxy Statement for the 2022 Annual Meeting of Shareholders, to be filed with the Securities and Exchange Commission not later than 120 days after the end of the registrant’s fiscal year ended December 31, 2021, are incorporated herein by reference (Part III, Items 10-14 of this Annual Report on Form 10-K).

TABLE OF CONTENTS

Page

PART I

Item 1. Business 1

Item 1A. Risk Factors 14

Item 1B. Unresolved Staff Comments 27

Item 2. Properties 27

Item 3. Legal Proceedings 27

Item 4. Mine Safety Disclosures 27

PART II

Item 6. [Reserved] 29

Item 7A. Quantitative and Qualitative Disclosures about Market Risk 39

Item 8. Financial Statements and Supplementary Data 40

Item 9A. Controls and Procedures 69

Item 9B. Other Information 70

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 70

PART III

Item 10. Directors, Executive Officers and Corporate Governance 71

Item 11. Executive Compensation 71

Item 14. Principal Accountant Fees and Services 71

PART IV

Item 15. Exhibits and Financial Statement Schedules 72

SIGNATURES 76

PART I

Item 1. Business.

This Annual Report on Form 10-K (Report) contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended (Exchange Act). These forward-looking statements are identified as any statement that does not relate strictly to historical or current facts and may include words such as “anticipate,” “believe,” “intend,” “plan,” “project,” “forecast,” “strategy,” “position,” “continue,” “estimate,” “expect,” “may,” “will,” “could,” “predict,” and similar expressions or the negative or other variations thereof. In particular, statements, express or implied, concerning the estimated financial impact of the COVID-19 (COVID) pandemic, the company’s anticipated plans and responses to the COVID pandemic, the company’s expectations relating to current supply chain and labor constraints, future operating results or margins, the ability to generate sales and income or cash flow, expected revenue mix, the company’s business strategy and strategic initiatives, the company’s repurchases of shares of its common stock and the company’s intentions concerning the payment of dividends, among others, are forward-looking statements. Although the company believes these statements are based on and derived from reasonable assumptions, they involve risks, uncertainties and assumptions that are beyond the company’s ability to control or predict, relating to operations, markets and the business environment generally, including those discussed under Part I, Item 1A of this Report and in any of the company’s subsequent reports filed with the Securities and Exchange Commission (SEC). In particular, these statements also depend on the duration, severity and evolution of the COVID pandemic and related risks, including the emergence and severity of its variants, the availability of vaccines and potential hesitancy to utilize them, government and other third-party responses to the crisis and the consequences for the global economy, the company’s business and the businesses of its suppliers and customers. Events relating to or resulting from the COVID pandemic, including the possibility of customer demand fluctuations, supply chain constraints, or the ability to utilize the company’s manufacturing facilities at sufficient levels to cover its fixed operating costs, may have resulting impacts on the company’s business, financial condition, results of operations, and the company’s ability (or inability) to execute on its plans to respond to the COVID pandemic. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual outcomes, including the future results of our operations, may vary materially from those indicated. Undue reliance should not be placed on any forward-looking statements. Forward-looking statements are not guarantees of performance. All forward-looking statements included in this document are based upon information available to the company as of the date of this document, and the company assumes no obligation to update.

Our fiscal year ends on December 31. Consequently, references to 2021 relate to the calendar year ended December 31, 2021; references to 2020 relate to the calendar year ended December 31, 2020, etc.

General

Benchmark Electronics, Inc. (Benchmark) is a Texas corporation that began operations in 1979 and is today a worldwide provider of innovative product design services, engineering services, technology solutions and advanced manufacturing services (both electronic manufacturing services (EMS) and precision technology services). In this Report, references to Benchmark, the Company or use of the words “we”, “our” and “us” include Benchmark’s subsidiaries unless otherwise noted.

From initial product concept to volume production, including direct order fulfillment and aftermarket services, Benchmark has been providing integrated services and solutions to original equipment manufacturers (OEMs) since 1979. Today, Benchmark proudly serves the following industries: aerospace and defense (A&D), medical technologies, complex industrials, semiconductor capital equipment (semi-cap), next-generation telecommunications and advanced computing.

Our customer engagement focuses on three principal areas:

•

Design & Engineering Services, which include design for manufacturability, manufacturing process and test development, concurrent and sustaining engineering, turnkey product design and regulatory services. Our engineering services may be for systems, sub-systems, printed circuit boards and assemblies, and components. We provide these services across all the industries we serve, but focus primarily in regulated industries such as medical, complex industrials, A&D, and semi-cap.

•

Technology Solutions, which involve developing a library of building blocks or reference designs primarily in defense solutions, surveillance systems, radio frequency (RF) and high-speed design, and front-end managed connectivity data collection systems. We often merge these technology solutions with engineering services to provide turnkey product development from requirements through to volume production that we support with our manufacturing services. Our building blocks can be utilized across a variety of industries

but we have significant capabilities in the A&D and the complex industrials markets. We have also developed differentiated capabilities in RF and high-speed design for both components and substrates. The need to reduce size, weight, and power (SWaP) to accommodate high frequency electronics communications is important to customers in the A&D, medical and next generation telecommunications markets.

•

Manufacturing Services, which include printed circuit board assemblies (PCBAs) using both traditional surface mount technologies (SMT) and microelectronics, subsystem assembly, system build and integration. System builds and integration often involve building a finished assembly that includes PCBAs, complex subsystem assemblies, mechatronics, displays, optics, and other components. These final products may be configured to order and delivered directly to the end-customer across all the industries we serve. Manufacturing services also includes precision technology services comprised of precision machining, advanced metal joining, assembly and functional testing primarily for the semi-cap market (serving semiconductor capital equipment customers) and A&D market.

Our core strength lies in our ability to provide concept-to-production solutions in support of our customers. Our global manufacturing presence increases our ability to respond to our customers’ needs by providing accelerated time-to-market and time-to-volume production of high-quality products – especially for complex products with lower volume and higher mix in regulated markets with higher reliability requirements. These capabilities enable us to build strong strategic relationships with our customers and to become an integral part of their business.

We believe our primary competitive advantages are our leading edge technical capabilities in engineering services (including product design in which we can take a product idea from concept to design to volume manufacturing), technology solutions (especially high frequency RF solutions, microelectronics, and miniaturization), and manufacturing services (including electronics and complex precision machining capabilities) provided by highly skilled personnel. We also have diversified end market and regulated market experience in our targeted higher-value markets. To support customers in these markets, we have invested in strategic global supply chain design and execution.

In addition, we believe that a strong focus on human capital through the talent we hire and retain is critical to maintaining our competitiveness. We are driving a customer-centric organization with a high degree of accountability and ownership to develop processes necessary to exceed customer expectations and deliver financial performance aligned to our goals. Through our employee feedback process, we solicit and act upon information to improve our company and better support our customers and business processes in the future. We have taken steps to attract the best leaders and are accelerating our efforts to increase our diversity and inclusion in our employee and management ranks as we seek to develop an innovative and forward thinking workforce for the future.

Our Industry

Outsourcing engineering and manufacturing services enable OEMs to concentrate on their core strengths, such as research and development, branding, and marketing and sales. In an outsourcing model, OEMs also benefit from improved efficiencies and reduced production costs, volume purchasing leverage, reduced fixed capital investments, improved inventory management, and access to global engineering and manufacturing resources. OEMs continue to turn to outsourcing partners to reduce time-to-market and time-to-volume production through utilization of their service providers’ product design and engineering services, technology solutions and manufacturing services.

Outsourcing rates fluctuate periodically, and not all industries we serve are outsourcing at the same growth rates. The traditional markets of computing and telecommunications have used the outsourcing model for a number of years and have a lower outsourcing growth potential than the less-outsourced medical, complex industrials, A&D, and semi-cap markets, which we identify as our higher-value markets. The higher-value markets typically provide the opportunity for increased value-add which leads to higher profitability than the traditional markets and in some cases provide the potential for stable growth. The higher-value markets also align well with our expertise in more complex and highly regulated products, and we believe we are well-positioned to capitalize on increased outsourcing in these markets.

Our Strategy

Our goal is to be the solutions provider of choice to leading OEMs that we believe offer the greatest potential for profitable growth. To meet this goal, we have implemented the following strategies:

•

Focus on More Complex Products for Customers. EMS providers serve a wide range of OEMs in different industries, offering scalable electronics assembly as a service. The product scope ranges from

easy-to-assemble, low-cost, high-volume products targeted for the consumer market to complicated, state-of-the-art, mission-critical products. Higher-volume manufacturing customers in the more traditional markets of computing and telecommunications often compete on price with short product life cycles and require less value-add from EMS providers. We focus on lower-volume manufacturing customers in the A&D, medical, and industrial markets, which are often in highly regulated industries where they are increasingly outsourcing higher value-added services to their EMS providers to meet stringent regulatory and time-to-market requirements. In the traditional markets, we focus on customers with more complex requirements such as high-performance computing and next generation telecommunications. In the higher-value markets where outsourcing growth rates are increasing and product life cycles are longer, we focus on customers where there is a strong match between our capabilities and their needs. Our objective is to achieve annual sales from higher-value market customers around 80% of total revenue which may fluctuate from period-to-period based on the mix of revenue between sectors.

•

Lead with Design & Engineering Services and Leverage Advanced Technology Solutions. In addition to strength in manufacturing complex high-density PCBAs, complex mechanical systems, and full systems integration, we offer customers specialized and tailored advanced design solutions, including technology building blocks and engineering services. We provide this engineering expertise through our design centers in the United States and Mexico (Americas), Asia and Europe. Leading with engineering is important to our strategy to increase sales to customers in our targeted higher-value markets where products require high quality, extreme reliability and low product failure rates. By leveraging our advanced technology and engineering solutions, customers can focus on core branding and marketing initiatives while we focus on bringing their products to market faster and more efficiently.

•

Maintain and Develop Close, Long-Term Relationships with our Customers. Our strategy is focused on establishing long-term relationships with leading OEMs in growth industries by becoming an integral part of their concept-to-production and full product life cycle requirements. To accomplish this, we rely on our business development executives, account managers, site program managers and general management teams to respond with speed and flexibility to frequently changing customer design specifications and production requirements. We focus on caring for our customers and ensuring that their needs are consistently met or exceeded.

•

Deliver Complete Manufacturing Solutions Globally. OEMs increasingly require a wide range of specialized design engineering and manufacturing services from EMS providers in order to reduce costs and accelerate their time-to-market and time-to-volume production. Building on our integrated engineering and manufacturing capabilities, we offer services from initial product design and test to final product assembly and distribution to OEM customers. Our precision technology services and complex mechanical manufacturing, along with our systems integration assembly and direct order fulfillment services, allow our customers the potential to reduce product cost and risk of product obsolescence by reducing their total work-in-process and finished goods inventory. These services are available at many of our manufacturing locations and allow us to offer customers the flexibility to move quickly from design and initial product introduction to production and distribution. We also offer our customers the opportunity to combine the benefits of low-cost manufacturing with the benefits and capabilities of our higher complexity support in Americas, Asia and Europe.

•

Continue to Seek Cost Savings and Operational Excellence. We seek to optimize our network of facilities to provide cost-efficient services for our customers. We have a global culture of continuous improvement, sharing best practices and implementing lean principles. We will continue to drive lean and operational excellence initiatives with common global processes that allow us to optimize our cost structure and capacity. Our customers benefit from these initiatives by sharing in the cost savings and knowing that their manufacturing partner can scale to meet their growth needs.

•

Optimize our Global Footprint. We will continue to evaluate our global footprint to ensure we are improving the utilization of our facilities, expanding in the regional locations where customers would like to do business with us, and investing capital in new capabilities that match identified market needs. This effort has led to some site closures and site expansion across our network as appropriate.

•

Pursue Strategic Acquisitions. Our capabilities have continued to expand through acquisitions, and we will continue to selectively seek acquisitions which expand our core technology capabilities and expand the value of our services to new and existing customers.

•

Capital Allocation. In support of our financial goals, we will continue a strong focus on cash conversion and appropriate capital management. We continue to be focused on effective capital deployment by balancing appropriate investments to support ongoing business and driving organic growth while providing returns to our shareholders through dividends and share repurchases. Future investments may include augmenting internal technical capabilities complemented by targeted acquisitions.

Services We Provide

Through the Benchmark network, we offer a wide range of design, engineering, automation, test, manufacturing and fulfillment solutions that support our customers’ products from initial concept and design through prototyping, design validation, testing, ramp-to-volume production, worldwide distribution and aftermarket support. With our balanced footprint, we have the ability to serve global and regional customers. We support all of our service offerings with supply chain management systems, superior quality program management and integrated information technology systems. Our comprehensive service offerings enable us to provide a complete solution for our customers’ outsourcing requirements. All of our services are supported through a strong quality management system designed to globally provide the process discipline to reliably deliver high quality services, solutions and products to our customers.

Design & Engineering Services and Technology Solutions:

Our approach is to coordinate and integrate our concept, design, prototype and other engineering capabilities in support of our customers’ go-to-market and product life cycle requirements. These services strengthen our relationships with our manufacturing customers and help attract new customers that require specialized design and engineering services. Early engagement with engineering-led solutions is key to our strategy of focusing on products with greater complexity in our targeted verticals.

•

New Product Design, Prototype, Testing and Related Engineering Services. We offer a full spectrum of new product design, automation, test development, prototype and related engineering services for projects contracted by our customers who pay for and own the resulting designs in our contract design services business. We employ a proven seven-step process for concept-to-production in our design services model that enables a shorter product development cycle and gives our customers a competitive advantage in time-to-market and time-to-profit. Our multi-disciplined engineering teams provide expertise in a number of core competencies critical to serving OEMs in our target markets, including award-winning industrial design, mechanical and electrical hardware, firmware, software and systems integration and support. We create specifications, designs and quick-turn prototypes, then validate and ramp our customers’ products into volume manufacturing.

•

Custom Testing and Automation Equipment Design and Build Services. We provide our customers a comprehensive range of custom circuit and functional test equipment, process automation and replication solutions. We have expertise in tooling design, test solutions, equipment control and process, systems planning, process automation, systems integration, replication and programming. Our custom test solutions, process automation and replication services are available to our customers as part of our full-service product design and manufacturing solutions package or on a stand-alone basis for products designed elsewhere. We also provide custom test equipment and automation system solutions to OEMs, which pay for and own the designs. Our ability to provide these solutions allows us to capitalize on OEMs’ increasing needs for custom manufacturing solutions and provides an additional opportunity for us to introduce these customers to our comprehensive engineering and manufacturing services.

•

Technology Solutions. We are investing in building blocks and solutions such as secure defense turnkey design and reference platforms in avionics, ground vehicle electronics, munitions, and soldier platforms that require ruggedization for harsh environments and secure communications. We are developing advanced manufacturing capabilities and processes for RF microwave and photonics designs that utilize highly accurate micro-electronics and photonics equipment, complementing our engineering expertise in these areas. We are focused on the high frequency and SWaP requirements resulting from the challenges in the defense and telco 5G markets.

Manufacturing Services (Electronics Manufacturing and Testing Services):

As OEMs seek to provide greater functionality in smaller products, they increasingly require sophisticated manufacturing technologies and processes. Our investment in advanced manufacturing equipment and process development, as well as our experience in innovative packaging and interconnect technologies, enable us to offer a variety of advanced manufacturing solutions. These packaging and interconnect technologies include but are not limited to:

•

Printed Circuit Board Assembly (PCBA) & Test. We offer our customers expertise in a wide variety of traditional and advanced manufacturing technologies. Our technical expertise supports complex, PCBA

and test solutions, assembly of subsystems, circuitry and functionality testing of printed assemblies, environmental and stress testing and component reliability testing.

We provide our customers with a comprehensive set of PCBA manufacturing technologies and solutions, which include:

•

Surface Mount Technology

Micro-Ball Grid Array

Land Grid Array

Quad Flat No-Leads

Package-on-Package

01005 Chip Components

Circuit Design and Fabrication of Hybrid interconnect and CCDs

•

Substrate Technology; Rigid Epoxy, Flex, Ceramic, Glass, Rigid-Flex;

•

Plated Through Hole Technology;

•

Pin-in-Paste Technology;

•

Hybrid RoHS Soldering Processes;

•

Wafer-Level CSP (WLCSP);

•

Flip Chip;

•

Chip-on-Board and Wire-Bonding;

•

In-Circuit Test;

•

Microelectronics, and

Mixed SMT and Microelectronics Assembly

•

Inspection and Test Solutions

Automated Optical Inspection (2D & 3D)

Automated X-ray Inspection

Flying Probe

Boundary Scan Test

In-Circuit Test

Board Level Functional Testing

Device/System Integration Functional Test

Electrical Safety Test

Microelectronics Test

Vibration, ESS, HASS and HALT

We also provide specialized solutions in support of our customers’ components, products and systems, which include:

•

Conformal Coating and Potting;

•

Underfill and Encapsulation;

•

Ultrasonic Welding;

•

Automation Solutions;

•

Complex Final Assembly;

•

Configure | Build to Order;

•

Fluidics Assembly;

•

Splicing and Connectorization for Optical Applications;

•

Hybrid Optical/Electrical Printed Circuit Board Assembly and Testing; and

•

Sub-Micron Alignment of Optical Sub-Assemblies.

•

Component Engineering Services. We provide support to our customers to understand the evolving international environmental laws and regulations on content, packaging, labeling and similar issues concerning the environmental impact of their products, including: “RoHS” (EU Directive 2011/65/EC on Restriction of certain Hazardous Substances); “WEEE” (EU Directive 2002/96/EC on Waste Electrical and

Electronic Equipment); “REACH” (EC Regulation No 1907/2006 on Registration, Evaluation and Authorization of Chemicals); EU Member States’ Implementation of the foregoing; “Conflict Minerals” as defined in the U.S. Dodd-Frank Wall Street Reform and Consumer Protection Act § 1502(b), implementing legislation and rules; and the People’s Republic of China (PRC) Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. Manufacturing sites in the Americas, Asia and Europe regions are experienced with both water soluble and no-clean processes.

•

Systems Assembly & Test. We offer a full spectrum of subsystem and system integration services. These include assembly, configuration and testing for all industries we service. We design, develop and build product-specific manufacturing processes utilizing manual, mechanized or fully automated lines to meet our customers’ product volume and quality requirements. We work with our customers to develop product-specific test strategies. Our test capabilities include manufacturing defect analysis, in-circuit tests to check the circuitry of the board and functional tests to confirm that the board or assembly operates in accordance with its final design and manufacturing specifications. We either custom design test equipment and software ourselves or use test equipment and software provided by our customers. We also offer our own internally designed functional test solutions for greater cost savings and flexibility and provide environmental stress tests of assemblies of boards or systems. We also provide product life cycle testing services, such as ongoing reliability testing where units are continuously cycled for extended periods while monitoring for early-life failures.

•

Failure Analysis. We offer an array of analytical solutions and expertise to help our customers address their most challenging engineering and business issues. This includes focused techniques for failure mode, failure mechanism, and root cause determination. Specialized analytical skill sets associated with electrical, mechanical, and metallurgical disciplines are used in conjunction with a vast array of equipment such as ion chromatography, x-ray florescence, and scanning electron microscopy. Our state-of-the-art lab facilities provide customers with detailed reporting and support in an unbiased, timely and cost-effective manner. Mastering emerging technologies, coupled with an understanding of potential failure mechanisms, positions us to exceed customer expectations and maintain our technological diversity.

Precision TechnologyServices (Precision Machining and Complex Vertically Integrated Assemblies):

In addition to traditional EMS, we offer complex precision technology services including full electromechanical assembly and testing services. Benchmark Precision Technologies delivers critical tolerance to metal fabrication and assembly, building components, sub-assemblies, and full module assemblies for highly regulated industries, including semi-conductor capital equipment, aerospace & defense, medical, and complex industrials. Benchmark Precision Technologies’ capabilities go well beyond the typical machine shop in that they can design and engineer a prototype, transition it to an accelerated manufacturing protocol (AMP) center to prepare for full volume production, and then shift it to any of Benchmark’s global manufacturing facilities.

•

Precision Technologies Group. We provide vertically integrated precision mechanical components and complex electromechanical assemblies. The processes supporting these include:

Complex Small / Medium / Large Precision Machining;

Advanced metal joining including vacuum chamber welding, electron beam laser and brazing;

Multi-Axis Robotic Grinding for demanding applications such as turbine blades and scientific instruments;

Complex Clean Room Assembly and Functional Test;

Major Electromechanical Assemblies;

Large precision and industrial frames; and

Sheet metal and paint.

Our global network of operations includes manufacturing facilities in eight countries, which are strategically located to support full product life cycle services for our customers. We have domestic facilities in Alabama, Arizona, California, Minnesota, New Hampshire and Texas and international facilities in China, Malaysia, Mexico, Netherlands, Romania, Singapore and Thailand. Our network also includes engineering centers that lead customer engagements and provide solutions to customers in the Americas, Asia and Europe. Additionally, we are compliant with and/or hold the following accreditations, certifications and registrations by geography:

Americas Europe Asia

FDA/QSR Compliant – Medical √ √

ISO 14971 – Medical Risk Management √

MedAccred √ √

AS9100 – Aerospace √ √ √

ITAR (International Traffic and Arms) √ √

Nadcap (National Aerospace & Defense Assoc. Program) √ √

FAA Approved Parts Manufacturer – Aviation √

IATF 16949 – Automotive √ √

TL9000 – Telecommunications √

ANSI ESD S20:20 √ √ √

ISO 9001 – Quality √ √ √

ISO 14001 – Environmental Health and Safety √ √ √

OHSAS 18001/ISO 45001 – Occupational Health and Safety √ √ √

Supply Chain, Order Fulfillment, and Aftermarket Support Services:

Our customers often face challenges in designing supply chains, demand planning, procuring materials and managing their inventories efficiently due to fluctuations in their customer demand, product design changes, short product life cycles and component price fluctuations.

We employ enterprise resource planning (ERP) systems and lean manufacturing principles to manage procurement and manufacturing processes in an efficient and cost-effective manner so that, where possible, components arrive on a just-in-time, as-and-when-needed basis. Because we are a significant purchaser of electronic components and other raw materials, we are generally able to capitalize on the economies of scale associated with our relationships with suppliers to negotiate price discounts, obtain components and other raw materials that are in short supply, and return excess components. Utilizing our agility and expertise in supply chain management and our relationships with suppliers across the supply chain, we strive to help reduce our customers’ cost of goods sold and inventory exposure. However, due to the COVID pandemic, as well as global labor and supply disruptions, we continue to see component supply chain constraints across all commodity categories that are constraining our ability to produce the full demand forecasts we are receiving from customers.

In support of our engineering services, technology solutions and manufacturing services, we offer our customers a wide array of capabilities from early supply chain design, to order fulfillment, to aftermarket services.

•

Value-Added Support Systems. We support our engineering, manufacturing, distribution and aftermarket support services with an efficient supply chain management system and a superior quality management program. Our value-added support services are primarily implemented and managed through a web-based information technology system that enables us to collaborate with our customers throughout all stages of the engineering, manufacturing and order-fulfillment processes.

•

Supply Chain Management. We offer full end-to-end supply chain design, inventory-management and volume-procurement capabilities to provide assurance of supply, optimized cost, and reduced total cycle time. Our materials strategy focuses on leveraging our procurement volume company-wide while providing local execution for maximum flexibility. We employ a full complement of electronic data interchange transactions with our suppliers to coordinate forecasts, orders, reschedules, and inventory and component lead times. Our ERP systems provide product and production information to our supply chain management, engineering change management and floor control systems. Our information systems include a proprietary module that controls serialization, production and quality data for all of our facilities around the world using state-of-the-art statistical process control techniques for continuous process improvements. To enhance our ability to rapidly respond to changes in our customers’ requirements by effectively managing changes in our supply chain, we utilize web-based interfaces and real-time supply chain management software products, which allow for scaling operations to meet customer needs, shifting capacity in response to product demand fluctuations, reducing materials costs and effectively distributing products to our customers or their end-customers.

•

Direct Order Fulfillment. We provide direct order fulfillment for some of our OEM customers. Direct order fulfillment involves receiving customer orders, configuring products to quickly fill the orders and delivering the products either to the OEM, a distribution channel or directly to the end customer. We manage our direct order fulfillment processes using a core set of common systems and processes that receive order information from the customer and provide comprehensive supply chain management, including procurement and production planning. These systems and processes enable us to process orders for multiple system configurations and varying production quantities, including single units. Our direct order fulfillment services include build-to-order (BTO) and configure-to-order (CTO) capabilities. BTO involves building a complete system in real-time to a highly customized configuration ordered by the OEM’s end customer. CTO involves configuring systems to an end customer’s specifications at the time the product is ordered. The end customer typically places this order by choosing from a variety of possible system configurations and options. We are capable of meeting a 2- to 24-hour turnaround time for BTO and CTO fulfillment. We support our direct order fulfillment services with logistics that include delivery of parts and assemblies to the final assembly site, distribution and shipment of finished systems, and processing of customer returns.

•

Aftermarket Non-Warranty Services. We provide our customers a range of aftermarket non-warranty services, including repair, replacement, refurbishment, remanufacturing, exchange, systems upgrade and spare part manufacturing throughout a product’s life cycle. These services are tracked and supported by specific information technology systems that can be tailored to meet our customers’ individual requirements.

Marketing and Customers

We market our services and solutions primarily through a direct sales force organized by market sector. In addition, our engineering, operational, and executive management teams are an integral part of our sales and marketing approach. We generally enter into master supply agreements with our customers. These arrangements generally govern the conduct of our business with customers relating to, among other things, the design and manufacturing of products that in some cases were previously produced by the customer. The arrangements also generally identify the specific products to be designed and manufactured, quality and production requirements, product pricing and materials management. There can be no assurance that these arrangements will remain in effect or be renewed, but we focus intently on customer care in an effort to anticipate and meet the current and future needs of our customers.

Our key customer accounts are supported by dedicated teams directly responsible for account management. These teams coordinate activities across the Benchmark global network to effectively satisfy customer requirements and have direct access to leadership and executive management to quickly address customer concerns. Local program managers and customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure. In addition, our executive management is heavily involved in customer relations and devotes significant attention to broadening existing and developing new customer relationships.

The following table sets forth the percentages of our sales by sector for 2021, 2020 and 2019.

Computing 9 % 8 % 16 %

A substantial percentage of our sales are made to a small number of customers and the loss of a major customer, if not replaced, would adversely affect us. Sales to our ten largest customers represented 47%, 41% and 38% of our sales in 2021, 2020 and 2019, respectively. Sales to Applied Materials represented 16% and 12% of our total sales in 2021 and 2020, respectively. In 2019, no single customer represented 10% or more of our total sales.

Seasonality

Seasonality in our business has historically been driven by customer complexity and product mix, particularly the industries that our customers serve. Although we have historically experienced higher sales during the fourth quarter, this pattern does not repeat itself every year. In addition, we typically experience our lowest sales volume in the first quarter of each year.

Suppliers

We maintain a network of suppliers of components and other materials used in our operations. We procure components when a purchase order or forecast is received from a customer and occasionally utilize components or other materials for which a supplier is the single source of supply. If any of these single-source suppliers were unable to provide these materials, a shortage of components could temporarily interrupt our operations and lower our profits until an alternate component could be identified and qualified for use. For additional information, see “Risk Factors—Shortages or price increases of components specified by our customers have delayed and are expected to continue delaying shipments and may adversely affect our profitability” in Part I, Item 1A of this Report. Although we have experienced component shortages and longer lead times for various components, particularly with regard to supply disruptions due to COVID, we continually strive to reduce the impact of component shortages by working with customers to reschedule deliveries and with suppliers to provide the needed components using just-in-time inventory programs, or by purchasing components at slightly higher prices from distributors rather than directly from manufacturers. In addition, by developing long-term relationships with suppliers, we endeavor to minimize the effects of component shortages compared to manufacturers without such relationships. The goal of these procedures is to reduce our inventory risk. However, due to the COVID pandemic, as well as global labor and supply disruptions, we continue to see component supply chain constraints across all commodity categories that are constraining our ability to produce the full demand forecasts we are receiving from customers.

Competition

The services we provide are available from many independent sources as well as from the in-house manufacturing capabilities of current and potential customers. Our competitors include Celestica Inc., Flex Ltd., Jabil Inc., Plexus Corp and Sanmina Corporation. We believe that the principal competitive factors in our targeted markets are engineering solutions capabilities, product quality, flexibility, cost and timeliness in responding to design and schedule changes, reliability in meeting product delivery schedules, pricing, technological sophistication and geographic location.

In addition, original design manufacturers (ODMs) that provide design and manufacturing services to OEMs have significantly increased their share of outsourced manufacturing services provided to OEMs in traditional markets, such as computing and telecommunication. Competition from ODMs may increase if our business in these markets grows or if ODMs expand further into or beyond these markets.

Environmental, Social & Governance (ESG) & Sustainability

Benchmark continues to evolve and improve upon its ESG strategy and is implementing and managing long-term, strategic sustainability initiatives. The Nominating, Sustainability and Governance Committee of our Board of Directors is sponsoring this effort and in 2020, Benchmark established an ESG/Sustainability Council. The ESG/Sustainability Council is currently chaired by Stephen J. Beaver, SVP, General Counsel & Chief Legal Officer, who is a member of our senior executive leadership team and provides regular updates to the Nominating, Sustainability and Governance Committee on ESG initiatives and progress. The Council also includes a cross-functional team of leaders representing operations, human resources, supply chain, regulatory compliance, finance, marketing communications, investor relations, facilities and the legal department. The team performed an assessment in 2020 of ESG topics aligned with the Sustainability Accounting Standards Board (SASB) with the goal of developing future reporting that will include other frameworks such as the Global Reporting Initiative (GRI), United Nations Sustainable Development Goals (SDG) and the Task Force on Climate-Related Financial Disclosures (TCFD). We expect to publish and release our inaugural 2021 Sustainability Report at or around the time of the filing of our proxy statement for our 2022 Annual Meeting of Shareholders. Our most current sustainability information is posted on our website at https://www.bench.com/sustainability.

Benchmark’s long-term commitment to sustainability is comprehensive, placing increased focus and emphasis on environmental consciousness, social responsibility, ethics and corporate governance, and supply chain ecosystem

responsibility. Our goal is to do our part in contributing to a more sustainable world, while providing value to our shareholders consistent with our business objectives. Our sustainability priorities include:

Environmental Responsibility:

•

We are committed to protecting the natural environment and our community by complying with all applicable legal and regulatory requirements.

•

We engage our employees to accomplish this by conserving energy; reducing consumption of natural resources; preserving air, soil, and water quality, managing waste properly and encouraging reuse or recycling; reducing use of toxic substances and applying an ethical approach to source reduction and disposal efforts.

•

All Benchmark manufacturing facilities are either currently certified or undergoing certification to ISO 14001, which is a set of standards related to environmental management and systems. The ISO 14001 standards help organizations minimize adverse impacts to the environment, comply with applicable laws, regulations and other requirements, and achieve continual improvement in these areas.

•

Benchmark has launched a number of global initiatives designed to reduce energy consumption in our facilities, including upgrades and or retrofits in LED and motion detector lighting, solar panels, cooling towers, compressed air and vacuum systems, and exhaust fans.

Care for Our People:

•

We believe in upholding the principle of human rights, worker safety and observing fair labor practices within our organization and our supply chain.

•

We embrace diverse viewpoints and perspectives, recognizing that greater inclusion fosters innovation and achieves better decision making and financial results. Thus, we are strengthening our diversity, equity and inclusion programs with a planned set of actions around organizational training, refreshed company values, and a revitalized recruitment strategy. For additional information, see "—Human Capital Management" below.

•

We are committed to ensuring that proper working conditions exist for the safety of our employees, such as the implementation of 6S lean management concepts (sort, set, shine, standardize, sustain, and safety) and visual management practices, developing, implementing and continuously improving our Occupational Health and Safety Management System, and providing appropriate education, reporting and controls.

•

We are committed to participating in the development of our surrounding communities and supporting diversity.

•

In the fall of 2019, a strategic customer presented a Benchmark operation with a “Supplier ESG Excellence Award” for their “participation, leadership and superiority during the Forced and Bonded Labor Prevention Program.”

Ethics & Corporate Responsibility:

•

We are committed to ensuring ethical organizational governance, promoting business ethics and integrity, and embracing diversity, equity and inclusion in the boardroom and throughout the organization.

•

We are committed to observing fair, transparent and accountable operating practices.

•

Benchmark believes that its ultimate responsibility is to help create and foster the best possible work environment for everyone in our organization. To this end, we implemented a “Speak Up!” campaign designed to promote a positive and ethical organizational culture. We believe that each team member, regardless of position, shares in this responsibility, and we encourage all of them to “Speak Up!” with questions or concerns about actual or potential ethical issues, questions about company policies, suggestions about how we can make our organization better and to address any other concerns.

•

To facilitate open and honest communication, in 2018 we upgraded our whistleblower Helpline to include global local phone numbers, together with language support, that allows reporters to “Speak Up!” in over 150 native languages. In addition, we added a web portal that allows online reporting of concerns, a place to ask questions, or quickly access ethics and compliance policies.

•

We believe these efforts strengthen our enterprise ethics and compliance efforts and foster the environment where employees and stakeholders can express and have concerns resolved.

Supply Chain Responsibility:

•

We are committed to sourcing with suppliers willing to support our sustainability initiatives.

•

Benchmark endorses the Responsible Business Alliance (RBA)(formerly the Electronics Industry Citizenship Coalition or EICC) Code of Conduct, which provides guidance in five critical areas of corporate social responsibility (CSR) performance, including labor, health and safety, environment, management systems, and ethics. Benchmark also seeks the same endorsement from our business partners, requesting that each business partner adhere to the RBA Code of Conduct or its equivalent at initial engagement and flowing these requirements through our commercial contracts to our business partners and supply chain. Benchmark also conducts a supply chain monitoring system to assess adherence in these areas with regard to our supply chain partners.

•

Benchmark also endorses EcoVadis, a provider of sustainability ratings, intelligence and collaborative performance improvement tools for global supply chains. The EcoVadis methodology evaluates criteria across four themes: environment, fair labor practices, ethics/fair business practices and supply chains. In 2021, Benchmark was again awarded the EcoVadis Silver Medal-Sustainability rating, placing it in the upper quartile of EcoVadis rated companies.

•

Benchmark also supports Rule 13p-1 under the Exchange Act (Conflict Minerals Law) and efforts to avoid sourcing conflict minerals that directly or indirectly finance or benefit armed groups in the Democratic Republic of Congo (DRC) and in adjoining countries. Consistent with the Conflict Minerals Law and the OECD Due Diligence Guidance concerning conflict minerals, Benchmark adopted the Conflict Free Sourcing Initiative Due Diligence reporting process and seeks to obtain conflict minerals content declarations from its suppliers, all in an effort to promote supply chain transparency. Benchmark does not directly source tin, tantalum, tungsten or gold (3TG) from mines, smelters or refiners, and is in most cases several or more levels removed from these supply chain participants. Benchmark therefore expects:

our suppliers to source 3TG only from smelters and refiners validated as being conflict free and that do not directly or indirectly benefit or finance armed groups in the DRC or other covered country;

our suppliers to fully-comply with the Conflict Minerals Law and provide all necessary declarations;

our suppliers to pass these requirements through to their supply chain and determine the source and chain of custody of specified minerals, including 3TG; and any suppliers not willing to comply with these requirements shall be reviewed by our global procurement team with regard to future business and sourcing declarations. This conflict minerals policy encourages our suppliers to respect and protect human rights throughout the world.

Human Capital Management

Our employees are an indispensable contributor to our success. Only an inspired community of talented employees enable us to realize our Company Vision to “positively impact lives by solving complex challenges with our customers, creating innovative products that no one imagined were possible.”

We believe we have a responsibility to foster the best possible work environment for everyone in our organization through sound ethical and organizational governance, by promoting business ethics and integrity, and by embracing equality, diversity and inclusion throughout our organization. For additional information, see “—Environmental, Social & Governance (ESG) & Sustainability—Ethics & Corporate Responsibility,” above.

Purpose and Culture

Benchmark focuses on delivering an engaging employee experience for our team members, creating a workplace where they can build the career of their dreams. Through encouragement, our desire is to have our team members unleash their full potential to drive industry leading business results, while making a lasting difference in the lives of others. We embrace diverse viewpoints and perspectives, recognizing that greater inclusion fosters innovation and improves decision-making and financial results. In 2021, the Company published a refreshed set of values that drive our culture. These values include:

•

We act with integrity by doing what we say we are going to do, exhibiting accountability, and building trust at all times.

•

We value inclusion by respecting diverse opinions to collaborate effectively.

•

We are committed to customers both internally and externally, with a dedication to excellence in every encounter.

•

We promote ingenuity by proactively attacking challenges, creating innovative solutions, and constantly learning to drive continuous improvement.

•

We genuinely care for each other, our customers, and our communities.

As mentioned above, we established an ESG/Sustainability Council in 2020 with Board oversight to drive the five tenets of our long-term ESG strategy: Environmental Responsibility, Our People, Our Community, Governance and Our COVID Response. Our commitment to ESG and these tenets is a strategic and operational imperative as we build a sustainable infrastructure across the Company. In partnership with our employees, we are committed to protecting the natural environment and our community through pollution prevention, conservation, responsible use and sustainable practices. Through our sustainability initiatives, we further engage our employees to ensure that our business practices support diversity, equity and inclusion to build an innovative workforce and to strive toward having our organization reflect the diversity of our customers and suppliers.

Our Human Capital and Compensation Committee is responsible for overseeing the Company’s human capital practices and management compensation philosophy, including the incentive compensation and equity-based plans for executives. Our Chief Human Resources Officer reports on important human capital management topics to this committee every quarter, including the Company’s all-important diversity, equity and inclusion initiatives.

Diversity, Equity and Inclusion

Benchmark’s Diversity, Equity and Inclusion (DEI) strategy is focused on creating a culture of belonging where team members can be their authentic selves and cultivate a workplace where everyone can succeed.

Our commitment to DEI starts at the top with the Company’s Board of Directors. In early 2021, the Board’s Nominating, Sustainability and Governance Committee committed to adding more diversity to our Board with the goal of adding continued female representation, as well as a racially and/or ethnically diverse member as we continue to evolve our Board structure. In June 2021, the Company welcomed Lynn Wentworth as our latest female director. In October 2021, Benchmark appointed a new independent director, Ramesh Gopalakrishnan, to fill a vacant board position. Mr. Gopalakrishnan is a native of India and brings diverse perspectives and thought leadership to the Board based on his significant global operational and strategy experience at several multinational companies. We will continue to keep diversity in mind as we refresh our Board in the future.

In January 2022, the senior executive team selected 16 Benchmark team members to serve on the Company’s inaugural Inclusion Council. The Inclusion Council, which includes our Chief Executive Officer and our Chief Human Resources Officer, meet regularly to discuss the Company’s role in DEI and provide advice to integrate, inform and shape the DEI strategy at Benchmark. Our aim is to ensure that the Company is a place where diverse thinking, experiences and ideas are encouraged, presented and celebrated in order to see the best ideas come to life. To advance these objectives, the Company increased the availability of training on topics such as anti-harassment, anti-discrimination and unconscious bias. The Company is also training our talent acquisition team and hiring managers on how to work to eliminate bias in the interview process. The Company also conducted a global engagement and inclusion survey in the fall of 2021 to elicit feedback from employees, and is developing action plans for continuous improvement in the areas of leadership, communication, culture, inclusion, growth and development. The Human Capital and Compensation Committee of our Board of Directors reviews these initiatives and results with our Chief Human Resources Officer quarterly to track progress on our DEI strategy.

Career Development

Benchmark is committed to developing a qualified and motivated workforce to power our continued innovation and growth. We provide opportunities for employees to gain the skills and knowledge they need to advance in the Company and fulfill their personal career goals.

We are on a journey to transform and modernize our talent management practices at Benchmark. In 2020, the Company began implementing a new Human Capital Management (HCM) system to establish a foundation and common database upon which the Company can centralize people-related data and standardize people management processes across the globe. The HCM system provides an operating framework to enable leaders to better hire talent and manage teams, including setting goals, performance evaluations, succession planning, and learning and

development. The HCM system will also provide visibility for the Company to monitor employee retention rates, employee promotions and other data to help ensure that we focus on giving employees opportunities to advance within the Company. The Company also offers competency-based training on leadership and development through our online learning platform.

We offer competitive compensation and benefits packages that reflect the needs of our workforce. In the U.S., we offer medical, dental, and vision benefits, disability coverage, survivor benefits, and a wellness program. We also offer competitive retirement benefits including a 401(k) match program at 100% of eligible employee contributions up to 4%, as well as similar retirement financial tools in other countries in which we operate. In addition to base salary, Benchmark employees participate in a Quarterly Incentive Plan or Annual Incentive Plan that supports our organizational philosophy of allowing employees to share in the Company’s performance and success. These plans align employee efforts to achieve the Company’s strategic objectives through cash bonus payouts based primarily on performance results achieved against plan performance measures. Our executive compensation program is designed to attract, retain, and reward performance and align incentives with achievement of the Company’s strategic plan and both short- and long-term operating objectives. In accordance with our compensation philosophy established by the Human Capital and Compensation Committee and the Board, we believe our executive pay is well-aligned with performance, creating a positive relationship between our operational performance and shareholder returns. Benchmark utilizes equity grants as part of at-risk incentive compensation for Named Executive Officers using a combination of performance-based restricted stock units and time-based restricted stock units to align their compensation with the creation of shareholder value.

Our Chief Human Resources Officer, and other key leaders in our organization, update the Human Capital and Compensation Committee on our strategy for talent development and retention, including succession planning for key positions in the Company.

Health and Safety

The safety of our employees is also of paramount concern to us. We are committed to ensuring that proper working conditions exist for the safety of our employees, such as the implementation of 6S and visual management practices, developing, implementing and continuously improving our Occupational Health and Safety Management System, and providing appropriate education, reporting and controls. We engage our employees to participate in decision-making as part of our Occupational Health and Safety Management System to ensure that we are developing, implementing and continuously improving our health and safety ecosystem and performance to prevent injury and illness. From the onset of the COVID pandemic, we established a COVID Task Force, a cross-functional advisory team of Company leaders committed to promoting the health and safety of our employees in accordance with Centers for Disease Control and Prevention (CDC) guidelines and ensuring that our employees’ safety remains a constant focal point. The COVID Task Force has promulgated policies, procedures, protocols and guidelines relating to symptom awareness and contact tracing, remote work requirements, effective hygiene practices, travel restrictions, temperature screening, visitor protocols, social distancing, facial mask requirements, enhanced cleaning protocols and decontamination procedures.

As of December 31, 2021, we employed approximately 10,900 people, approximately 340 of whom were engaged in design and development engineering. None of our domestic employees are represented by a labor union. In certain international locations, our employees are represented by labor unions and by works councils. Some European countries also often have mandatory legal provisions regarding terms of employment, severance compensation and other conditions of employment that are more restrictive than U.S. laws. We have never experienced a strike or similar work stoppage, and we believe that our employee and labor relations are strong.

Segments and International Operations

We have manufacturing facilities in the Americas (United States and Mexico), Asia (China, Malaysia, Singapore and Thailand) and Europe (Netherlands and Romania) to serve our customers. Benchmark is operated and managed geographically, and management evaluates performance and allocates resources on a geographic basis. During 2021, 2020 and 2019, 55%, 52% and 47%, respectively, of our sales were from our international operations. See Note 8 and Note 13 to consolidated financial statements in Part II, Item 8 of this Report for segment and geographical information.

Governmental Regulation

Our operations, and the operations of businesses that we acquire, are subject to foreign, federal, state and local regulatory requirements relating to security clearance, trade compliance, anticorruption, environmental, waste management, and health and safety matters. We are committed to operating in compliance with all applicable requirements. Significant costs and liabilities may arise from these requirements or from new, modified or more stringent requirements, which could affect our earnings and competitive position. In addition, our past, current and future operations, and those of businesses we acquire, may give rise to claims of exposure by employees or the public or to other claims or liabilities relating to environmental, waste management or health and safety concerns.

We periodically generate and temporarily handle limited amounts of materials that are considered hazardous waste under applicable law. We contract for the off-site disposal of these materials and have implemented a waste management program to address related regulatory issues. For additional information, see “Risk Factors—Compliance or the failure to comply with environmental regulations could cause us significant expense” in Part I, Item 1A of this Report.

Available Information

Our website may be viewed at http://www.bench.com. Reference to our website is for informational purposes only and the information contained therein is not incorporated by reference into this Report. We make available free of charge through our internet website our filings with the SEC, including our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after electronically filing such material with, or furnishing it to, the SEC. All reports we file with the SEC are also available free of charge via EDGAR through the SEC’s website at http://www.sec.gov.

Item 1A.Risk Factors.

The following risk factors should be read carefully when reviewing the Company’s business, the forward-looking statements contained in this Report, and the other statements the Company or its representatives make from time to time. Any of the following factors could materially and adversely affect the Company’s business, operating results, financial condition and the actual results of the matters addressed by the forward-looking statements.

Operational Risks

Our business, financial condition and results of operations have been and are expected to continue to be adversely affected by the COVID pandemic, the extent of which is uncertain and difficult to predict. The widespread outbreak of any other health epidemics could also adversely affect our business, financial condition and results of operations.

Any outbreaks of contagious diseases and other adverse public health developments, particularly in countries where we operate, could have a material and adverse effect on our business, financial condition and results of operations. In late 2019, there was an outbreak of a new strain of coronavirus (COVID) first identified in Wuhan, Hubei Province, China, which has since spread globally. On March 11, 2020, the World Health Organization declared COVID a pandemic. Further, the COVID outbreak has resulted in government authorities around the world implementing numerous measures to try to reduce the spread of COVID, such as travel bans and restrictions, quarantines, “shelter-in-place,” “stay-at-home,” total lock-down orders, business limitations or shutdowns and similar orders. As a result, the COVID pandemic has negatively impacted the global economy, disrupted global supply chains and workforce participation, and created significant volatility and disruption of financial markets.

More recently, more contagious variants of COVID, such as the Delta and Omicron variants, have emerged and spread globally, which has caused some governments to reimplement various measures, or impose new restrictions, in an effort to lessen the spread of COVID and its variants.

Benchmark provides critical infrastructure products and essential services in each of our locations. However, as a result of the COVID pandemic, including the related responses from government authorities, the Company’s operations were impacted worldwide starting in the first quarter of 2020. For example, the Company’s facilities worldwide, to varying degrees, were affected in 2021 and 2020 by government enacted plant shut-downs, stay-at-home or shelter-in-place or similar restrictions, which resulted in reduced productivity levels throughout our facilities that negatively impacted our operations. Additionally, the Company has experienced a challenging supply chain environment and labor constraints in 2020, and 2021, which are expected to continue throughout 2022, as well as increased direct costs and under absorption of fixed costs, due to the COVID pandemic. For additional information see “—COVID Pandemic Update” in Part II, Item 7 of this Report.

Additionally, our business, financial condition and results of operations have been and may be further impacted in several ways, including, but not limited to, the following:

•

further disruptions to our operations, including due to additional facility closures, restrictions on our operations and sales, marketing and distribution efforts and/or interruptions to our engineering and design processes and other important business activities;

•

reduced demand for our products and services, particularly due to disruptions to the businesses and operations of our customers;

•

interruptions, availability or delays in global shipping to transport our products;

•

further disruptions, slowdowns or stoppages in the supply chain for our products, in addition to higher costs;

•

limitations on employee resources and availability, including due to sickness, government restrictions, labor supply shortages, the desire of employees to avoid contact with large groups of people, mass transit disruptions or a shortage of available vaccinations;

•

greater difficulty in collecting customer receivables;

•

a continuation or worsening of general economic conditions, including increased inflation;

•

a fluctuation in foreign currency exchange rates or interest rates could result from market uncertainties;

•

an increase in the cost or the difficulty to obtain debt or equity financing could affect our financial condition or our ability to fund operations or future investment opportunities;

•

any breach of financial covenants contained in our credit agreement;

•

current or near future trends may cause certain inventory to be slow-moving and trigger the need to review for excess and obsolete inventory or the valuation of inventory;

•

changes to the carrying value of our goodwill and intangible assets; and

•

an increase in regulatory restrictions or continued market volatility could hinder our ability to execute strategic business activities, as well as negatively impact our stock price.

The spread of COVID has caused us to modify our business practices (including employee travel, employee work locations, and cancellation of physical participation in meetings, events and conferences), and we may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, customers, partners, and suppliers. There is no certainty that such measures will be enough to mitigate the risks posed by the virus, and our ability to perform critical functions could be harmed.

The emergence of the significantly more contagious Delta and Omicron variants of COVID and the prevalence of breakthrough cases of infection among fully vaccinated people adds additional uncertainty and could result in further impacts to our business and operations, including those discussed above.

Any of the foregoing could adversely affect our business, financial condition and results of operations. The potential effects of COVID may also impact many of our other risk factors discussed in this Report. The exact extent of the impact of the COVID pandemic on our business, financial condition and results of operations will depend on future developments, which are highly uncertain, continuously evolving and cannot be predicted, including, but not limited to, the duration and spread of the COVID pandemic and its severity; the emergence and severity of its variants, including the Delta and Omicron variants; the actions to contain the virus or treat its impact, including the availability and efficacy of vaccinations (particularly with respect to emerging strains of the virus) and the rate of inoculations; general economic factors, such as increased inflation; global supply chain constraints and shortages;

labor supply issues; and how quickly and to what extent normal economic and operating conditions can resume, which may not return fully to pre-pandemic levels.

Shortages or price increases of components specified by our customers have delayed and are expected to continue delaying shipments and may adversely affect our profitability.

Substantially all of our sales are derived from manufacturing services in which we purchase components specified by our customers. Currently, supply shortages for components and commodity categories used in manufacturing have resulted in industry-wide shortages of electronic components and have curtailed production of assemblies, primarily as a result of the ongoing COVID pandemic, including due to related labor and supply disruptions. In some instances, such component shortages have resulted in delayed shipments. Because of the continued increase in demand for surface mount components, we anticipate component shortages and longer lead times for certain components to occur. Also, we have and may continue to bear the risk of component price increases that occur between periodic re-pricings of products during the term of a customer contract. If shortages or delays in component products persist, the price of certain components may increase further, we may be exposed to quality issues, or the components may not be available at all. Further, we may not be able to secure enough components at reasonable prices or of acceptable quality to build products or provide services in a timely manner in the quantities needed or according to customer specifications. Accordingly, our business, cash flows, results of operations and financial condition could suffer if we lose time-sensitive sales, incur additional freight costs or are unable to pass on price increases to our customers due to such component shortages or delays.

We are dependent on the success of our customers and the markets in which they operate. When our customers or the markets in which they operate experience declines or grow at a significantly slower pace than anticipated, we may be adversely affected.

We are dependent on the continued growth, viability and financial stability of our customers. Our customers are OEMs of:

•

industrial equipment,

•

equipment for the A&D industries;

•

telecommunication equipment;

•

computers and related products for business enterprises;

•

medical devices; and

•

semi-cap equipment.

These markets are subject to rapid technological change, vigorous competition, short product life cycles and consequent product obsolescence. When our customers are adversely affected by these factors, we may be similarly affected. For example, the declines in demand in the aerospace market in 2020 and 2021 had a significant impact on us for those fiscal years.

The loss of a major customer would adversely affect us.

A substantial percentage of our sales are made to a small number of customers, and the loss of a major customer, if not replaced, would adversely affect us. Further, developments adverse to our major customers or their products, or the failure of a major customer to pay for components or services, could have an adverse effect on us. Sales to our ten largest customers represented 47%, 41% and 38% of our sales in 2021, 2020 and 2019, respectively.

We expect to continue to depend on sales to our largest customers, and any material delay, cancellation or reduction of orders from these customers or other significant customers would have a material adverse effect on our results of operations. In addition, we generate significant accounts receivable in connection with providing services to our customers. If one or more of our customers were to become insolvent or otherwise unable to pay for the services provided by us, our operating results and financial condition would be adversely affected.

Most of our customers do not commit to long-term production schedules, which makes it difficult for us to schedule production and achieve maximum efficiency of our manufacturing capacity.

The volume and timing of sales to our customers vary due to:

•

changes in demand for their products;

•

their attempts to manage their inventory;

•

design changes;

•

changes in their manufacturing strategies; and

•

acquisitions of, or consolidations among, customers.

Due in part to these factors, most of our customers do not commit to firm production schedules for more than one quarter in advance. Our inability to forecast the level of customer orders with certainty makes it difficult to schedule production and maximize utilization of manufacturing capacity. In the past, we have been required to increase staffing and other expenses in order to meet the anticipated demand of our customers. Anticipated orders from many of our customers have, in the past, failed to materialize or delivery schedules have been deferred as a result of changes in our customers’ business needs, thereby adversely affecting our results of operations. On other occasions, our customers have required rapid increases in production, which have placed an excessive burden on our resources. Such customer order fluctuations and deferrals have had a material adverse effect on us in the past, and may again in the future. A business downturn resulting from any of these external factors could have a material adverse effect on our operating income.

Winning business is subject to lengthy, competitive bid selection processes that often require us to incur significant expense, from which we may ultimately generate no revenue.

Our business is dependent on us winning competitive bid selection processes. These selection processes are typically lengthy and can require us to dedicate significant development expenditures and scarce engineering resources in pursuit of a single customer opportunity. Failure to obtain a particular design win may prevent us from obtaining design wins in subsequent generations of a particular product. This can result in lost revenue and could weaken our position in future competitive bid selection processes.

Our customers may cancel their orders, change production quantities, delay production or change their sourcing strategies.

EMS providers must provide increasingly rapid product turnaround for their customers. We generally do not obtain firm, long-term purchase commitments from our customers, and we continue to experience reduced lead-times in customer orders. Customers may cancel their orders, change production quantities, delay production or change their sourcing strategy for a number of reasons. Cancellations, reductions, delays or changes in the sourcing strategy by a significant customer or by a group of customers could negatively impact our operating income.

In addition, we make significant decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs, capital expenditures and other resource requirements, based on our estimate of customer requirements. The short-term nature of our customers’ commitments and the possibility of rapid changes in demand for their products impede our ability to accurately estimate the future requirements of those customers.

The degree of success or failure of our customers’ products in the market also affects our business. On occasion, customers require rapid increases in production, which can stress our resources and reduce operating margins. In addition, because many of our costs and operating expenses are relatively fixed, a reduction in customer demand can harm our gross profits and operating results.

We may encounter significant delays or defaults in payments owed to us by customers for products we have manufactured or components that are unique to particular customers.

We structure our agreements with customers to mitigate our risks related to obsolete or unsold inventory. However, enforcement of these contracts may result in material expense and delay in payment for inventory. If any of our significant customers become unable or unwilling to purchase such inventory, our business may be materially harmed.

Our financial results depend, in part, on our ability to perform on our U.S. government contracts, which are subject to uncertain levels of funding, timing and termination.

We provide services both as a prime contractor and subcontractor for the U.S. government. Consequently, a portion of our financial results depends on our performance under these contracts. Delays, cost overruns or product failures in connection with one or more contracts, could lead to their termination and negatively impact our results of operations, financial condition or liquidity. We can give no assurance that we would be awarded new contracts to offset the revenues lost as a result of such a termination.

U.S. government programs require congressional appropriations, which are typically made for a single fiscal year even though a program may extend over several years. Programs often are only partially funded, and additional funding requires further congressional appropriations. The programs in which we participate compete with other

programs for consideration and funding during the budget and appropriations process, which can be impacted by shifting and often competing political priorities.

Our government contracts often involve the development, application and manufacture of advanced defense and technology systems and products aimed at achieving challenging goals. New technologies used for these contracts may be untested or unproven and product requirements and specifications may be modified. Consequently, technological and other performance difficulties may cause delays, cost overruns or product failures. Moreover, there can be no assurance that the amounts we spend to develop new products or solutions to compete for a government contract will be recovered since we may not be awarded the contract.

Our international operations are subject to certain risks.

During 2021, 2020 and 2019, 55%, 52% and 47%, respectively, of our sales were from our international operations. These international operations are subject to a number of risks, including:

•

public health crises, such as the COVID pandemic, which can result in varying impacts to our business, employees, customers, suppliers, vendors and partners internationally as discussed elsewhere in this “Risk Factors” section;

•

difficulties in staffing and managing foreign operations;

•

coordinating communications and logistics across geographic distances and multiple time zones;

•

less flexible employee relationships, which complicate meeting demand fluctuations and can be difficult and expensive to terminate;

•

political and economic instability (including acts of terrorism and outbreaks of war), which could impact our ability to ship and/or receive product;

•

changes in foreign or domestic government policies, regulatory requirements and laws, which could impact our business;

•

longer customer payment cycles and difficulty collecting accounts receivable;

•

export duties, import controls, tariffs, and trade barriers (including quotas and border taxes);

•

governmental restrictions on the transfer of funds;

•

risk of governmental expropriation of our property;

•

burdens of complying with a wide variety of foreign laws and labor practices, including various and changing minimum wage regulations;

•

fluctuations in currency exchange rates, which could affect foreign taxes due, component costs, local payroll, utility and other expenses; and

•

inability to utilize net operating losses incurred by our foreign operations which would increase our overall effective tax rate.

Changes made that impact the way we operate internally could have a negative impact on us and reduce the demand for our foreign manufacturing facilities. Moreover, any regulatory actions by other countries where we operate could also negatively impact our financial performance. In addition, changes in policies by the U.S. or other governments could negatively affect our operating results due to trade wars, changes in duties, tariffs or taxes, currency exchange rate fluctuations, or limitations on currency or fund transfers, as well as government-imposed restrictions on producing certain products in, or shipping them to, specific countries. Also, our current facilities in Mexico operate under the Mexican Maquiladora (IMMEX) program. This program provides for reduced tariffs and eased import regulations. We could be adversely affected by changes in the IMMEX program or our failure to comply with its requirements. Additionally, increasing tariffs and other trade protection measures between the U.S. and China may affect the cost of our products originating in China as well as the demand for our products manufactured in China in the event our customers reduce operations in China as a result of such tariffs or trade protection measures. These actions could also affect the cost and/or availability of components that we procure from suppliers in China.

In addition, several of the countries where we operate have emerging or developing economies, which may be subject to greater currency volatility, negative growth, high inflation, limited availability of foreign exchange and other risks. Certain events, including natural disasters, can impact the infrastructure of a developing country more severely than they would impact the infrastructure of a developed country. A developing country can also take longer to recover from such events, which could lead to delays in our ability to resume full operations. These factors may harm our results of operations, and any measures that we may implement to reduce the effect of volatile currencies and other risks of our international operations may not be effective. In our experience, entry into new international markets requires considerable management time as well as start-up expenses for market development,

hiring and establishing office facilities before any significant revenues are generated. As a result, initial operations in a new market may operate at low margins or may be unprofitable.

Certain foreign jurisdictions, as well as the U.S. government, restrict the amount of cash that can be transferred to the U.S. or impose taxes and penalties on such transfers of cash. To the extent we have excess cash in foreign locations that could be used in, or is needed by, our operations in the United States, we may incur penalties and/or taxes to repatriate these funds.

Another significant legal risk resulting from our international operations is compliance with the U.S. Foreign Corrupt Practices Act (FCPA). In many foreign countries, particularly in those with developing economies, it may be a local custom that businesses operating in such countries engage in business practices that are prohibited by the FCPA, other U.S. laws and regulations, or similar laws of host countries and related anti-bribery conventions. Although we have implemented policies and procedures designed to comply with the FCPA and similar laws, there can be no assurance that all of our employees, agents, or those companies to which we outsource certain of our business operations, will not take actions in violation of our policies. Any such violation, even if prohibited by our policies, could have a material adverse effect on our business.

Start-up costs and inefficiencies related to new or transferred programs can adversely affect our operating results and such costs may not be recoverable if the new programs or transferred programs are cancelled.

Start-up costs, the management of labor and equipment resources in connection with the establishment of new programs and new customer relationships, and the need to estimate required resources in advance can adversely affect our gross margins and operating results. These factors are particularly evident in the early stages of the life cycle of new products and new programs or program transfers and in the opening of new facilities. These factors also affect our ability to efficiently use labor and equipment. We are currently managing a number of new programs. If any of these new programs or new customer relationships were terminated, our operating results could be harmed, particularly in the short-term. We may not be able to recoup these start-up costs or replace anticipated new program revenues.

Our business may be adversely impacted by natural disasters.

Some of our facilities are located in areas that may be impacted by hurricanes, earthquakes, water shortages, tsunamis, floods, typhoons, fires, extreme weather conditions and other natural or manmade disasters. For example, our facilities in Thailand experienced extensive flooding in 2011. Our insurance coverage for natural disasters is limited and is subject to deductibles and coverage limits. This coverage may not be adequate or may not continue to be available at commercially reasonable rates and terms. See “—Operational Risks—We bear the risk of uninsured losses.”

In addition, some of our facilities possess certifications necessary to work on specialized products that our other locations lack. If work is disrupted at one of these facilities, it may be impractical, or we may be unable, to transfer such specialized work to another facility without significant costs and delays. Thus, any disruption in operations at a facility with specialized certifications could adversely affect our ability to provide products and services to our customers, and thus negatively affect our relationships and financial results.

We bear the risk of uninsured losses.

As a result of extensive 2011 flooding in Thailand, we have been unable to obtain cost-effective flood insurance to adequately cover assets at our facilities in Thailand. We continue to monitor the insurance market in Thailand; however, we have made physical alterations to help mitigate a similar natural disaster. We maintain insurance on all our properties and operations for risks and in amounts customary in the industry. While such insurance includes general liability, property & casualty, cybersecurity and directors & officers liability coverage, not all losses are insured, and we retain certain risks of loss through deductibles, limits and self-retentions. In the event we experience a significant uninsured loss, it could have a material adverse effect on our business, financial condition and results of operations.

Energy price increases may negatively impact our results of operations.

Some of the components that we use in our manufacturing activities are petroleum-based. In addition, we, along with our suppliers and customers, rely on various energy sources (including oil) in our transportation activities. While significant uncertainty exists about the future levels of energy prices, a significant increase is possible.

Increased energy prices could cause an increase in our raw material and transportation costs. In addition, increased costs of our suppliers or customers could be passed along to us, and we may not be able to increase our product prices enough to offset them. Moreover, any increase in our product prices may reduce our future customer orders and profitability.

Introducing programs requiring implementation of new competencies, including new process technology within our mechanical operations, could affect our operations and financial results.

The introduction of programs requiring implementation of new competencies, including new process technology within our mechanical operations, presents challenges in addition to opportunities. Deployment of such programs may require us to invest significant resources and capital in facilities, equipment and/or personnel. We may not meet our customers’ expectations or otherwise execute properly or in a cost-efficient manner, which could damage our customer relationships and result in remedial costs or the loss of our invested capital and anticipated revenues and profits. In addition, there are risks of market acceptance and product performance that could result in less demand than anticipated and our having excess capacity. The failure or inability to reflect the anticipated costs, risks and rewards of such an opportunity in our customer contracts could adversely affect our profitability. If we do not meet one or more of these challenges, our operations and financial results could be adversely affected.

Customer relationships with start-up or emerging companies may present more risks than with established companies.

Customer relationships with start-up or emerging companies present special risks because these companies do not have an extensive product history. As a result, there is less demonstration of market acceptance of their products, making it harder for us to anticipate needs and requirements than with established customers. In addition, funding for such companies may be more difficult to obtain and these customer relationships may not continue or materialize to the extent we plan or previously experienced. This tightening of financing for start-up customers, together with many start-up customers’ lack of prior operations and unproven product markets increase our credit risk, especially in trade accounts receivable and inventories. Although we perform ongoing credit evaluations of our customers and adjust our allowance for doubtful accounts receivable for all customers, including start-up customers and emerging companies, based on the information available, these allowances may not be adequate. This risk may exist for any new start-up or emerging company customers in thefuture.

We face risks arising from the restructuring of our operations.

Over the past several years, we have undertaken initiatives to restructure our business operations with the intention of improving utilization and realizing cost savings. These initiatives have included changing the number and location of our production facilities, largely to align our capacity and infrastructure with current and anticipated customer demand. The process of restructuring entails, among other activities, moving production between facilities, transferring programs from higher cost geographies to lower cost geographies, closing facilities, reducing the level of staff, realigning our business processes and reorganizing our management.

Restructurings could adversely affect us, including a decrease in employee morale, delays encountered in finalizing the scope of, and implementing, the restructurings, failure to achieve targeted cost savings, and failure to meet operational targets and customer requirements due to the restructuring process. These risks are further complicated by our extensive international operations, which subject us to different legal and regulatory requirements that govern the extent and speed of our ability to reduce our manufacturing capacity and workforce.

Industry Risks

We operate in a highly competitive industry; if we are not able to compete effectively in the EMS industry, our business could be adversely affected.

We compete against many providers of electronics manufacturing services. Some of our competitors have substantially greater financial, manufacturing or marketing resources than we do and have more geographically diversified international operations than we do. Our competitors include Celestica Inc., Flex Ltd., Jabil Inc., Plexus Corp and Sanmina Corporation. In addition, we may in the future encounter competition from other large electronic manufacturers that are selling, or may begin to sell, electronics manufacturing services.

We also face competition from the manufacturing operations of our current and future customers, who are continually evaluating the merits of manufacturing products internally against the advantages of outsourcing to EMS

providers. In addition, in recent years, ODMs that provide design and manufacturing services to OEMs, have significantly increased their share of outsourced manufacturing services provided to OEMs in several markets, such as notebook and desktop computers, personal computer motherboards, and consumer electronic products. Competition from ODMs may increase if our business in these markets grows or if ODMs expand further into or beyond these markets.

During periods of recession in the electronics industry, our competitive advantages in the areas of quick turnaround manufacturing and responsive customer service may be of reduced importance to electronics OEMs, who may become more price sensitive. We may also be at a competitive disadvantage with respect to price when compared to manufacturers with lower cost structures, particularly those with more offshore facilities located where labor and other costs are lower.

The availability of excess manufacturing capacity at many of our competitors creates intense pricing and competitive pressure on the EMS industry as a whole. To compete effectively, we must continue to provide technologically advanced manufacturing services, maintain strict quality standards, respond flexibly and rapidly to customers’ design and schedule changes, deliver products globally on a reliable basis at competitive prices and seek to create enhanced relationships with our customers with our advanced technology and engineering solutions. Our inability to do so could have an adverse effect on us.

We may be affected by consolidation in the electronics industry, which could create increased pricing and competitive pressures on our business.

Consolidation in the electronics industry could result in a decrease in manufacturing capacity as companies seek to close plants or take other steps to increase efficiencies and realize synergies of mergers, creating increased pricing and competitive pressures for the EMS industry as a whole and our business in particular. In addition, consolidation could also result in an increasing number of very large electronics companies offering products in multiple sectors of the electronics industry. The growth of these large companies, with significant purchasing and marketing power, could also result in increased pricing and competitive pressures for us. Accordingly, industry consolidation could harm our business. We may need to increase our efficiencies to compete and may incur additional restructuring charges.

Regulatory, Compliance and Litigation Risks

Government contracts are subject to significant regulation, including rules related to bidding, billing, kickbacks and false claims, and any non-compliance could subject us to fines and penalties or debarment.

Like all government contractors, we are subject to risks associated with this contracting. These risks include substantial civil and criminal fines and penalties if we were to fail to follow procurement integrity and bidding rules or cost accounting standards, employ improper billing practices, receive or pay kickbacks or file false claims. We have been, and expect to continue to be, subjected to audits and investigations by U.S. and foreign government agencies and authorities. The failure to comply with the terms of our government contracts could result in progress payments being withheld, our suspension or debarment from future government contracts or harm to our business reputation.

Regulatory, legislative or self-regulatory/standard developments regarding privacy and data security matters could adversely affect our ability to conduct our business.

U.S. privacy and data security laws apply to our various businesses. We also do business globally in countries that have more stringent data protection laws than those in the United States that may be inconsistent across jurisdictions and are subject to evolving and differing interpretations. Governments, privacy advocates and class action attorneys are increasingly scrutinizing how companies collect, process, use, store, share and transmit personal data. In Europe, the General Data Protection Regulation (GDPR) requires us to protect the privacy of certain personal data of European Union (EU) citizens. The California Consumer Privacy Act (CCPA), which went into effect January 1, 2020, has similar protections. While we have implemented processes and controls to comply with GDPR and CCPA requirements, we could incur significant fines, individual damages and reputational risks if our controls and processes are ineffective and we fail to comply.

Unanticipated changes in our tax position, the adoption of new tax legislation or exposure to additional tax liabilities could adversely affect our financial results.

We base our tax position upon the anticipated nature and conduct of our business and upon our understanding of the tax laws of the various countries in which we have assets or conduct activities. Our tax position, however, is subject to review and possible challenge by taxing authorities and to possible changes in law. We cannot determine in advance the extent to which some jurisdictions may assess additional tax or interest and penalties on such additional taxes.

Several countries where we operate allow for tax holidays or provide other tax incentives to attract and retain business. We have obtained holidays or other incentives where available. Our taxes could increase if certain tax holidays or incentives were retracted, or if they were not renewed upon expiration, such as the nonrenewal of our tax holiday in Malaysia in 2021, or tax rates applicable to us in such jurisdictions were otherwise increased. In addition, further acquisitions may cause our effective tax rate to increase. Given the scope of our international operations and our international tax arrangements, changes to the manner in which U.S. based multinational companies are taxed in the U.S. could have a material impact on our financial results and competitiveness.

Based on current and future tax policy in Washington D.C., our effective tax rates and overall cash taxes may change in the future and could have an impact on our financial results.

Any litigation, even where a claim is without merit, could result in substantial costs and diversion of resources.

In the past, we have been notified of claims relating to various matters including intellectual property rights, contractual matters, labor issues or other matters arising in the ordinary course of business. In the event of any such claim, we may be required to spend a significant amount of money and resources, even where the claim is without merit. Accordingly, the resolution of such disputes, even those encountered in the ordinary course of business, could have a material adverse effect on our business, consolidated financial conditions and results of operations. See Part I, Item 3. Legal Proceedings.

Compliance or the failure to comply with environmental regulations could cause us significant expense.

We are subject to a variety of federal, state, local and foreign environmental laws and regulations relating to environmental, waste management, and health and safety concerns, including the handling, storage, discharge and disposal of hazardous materials used in or derived from our manufacturing processes. If we or companies we acquire have failed or fail in the future to comply with such laws and regulations, then we could incur liabilities and fines and our operations could be suspended. Such laws and regulations could also restrict our ability to modify or expand our facilities, could require us to acquire costly equipment, or could impose other significant expenditures. In addition, our operations may give rise to claims of property contamination or human exposure to hazardous chemicals or conditions.

Our worldwide operations are subject to local laws and regulations. Some of our operations are subject to various environmental laws and related regulations, including: the “RoHS” (EU Directive 2011/65/EC on Restriction of certain Hazardous Substances); “WEEE” (EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment); “REACH” (EC Regulation No 1907/2006 on Registration, Evaluation and Authorization of Chemicals); EU Member States’ Implementation of the foregoing; “Conflict Minerals” as defined in the U.S. Dodd-Frank Wall Street Reform and Consumer Protection Act § 1502(b), implementing legislation and rules; and the People’s Republic of China (PRC) Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products; and other environmental laws and regulations. These laws and regulations impose administrative burdens on and restrict the sourcing and distribution of products containing certain substances, including lead, within applicable geographies and require a manufacturer or importer to recycle products containing those substances.

These directives affect the worldwide electronics and electronics components industries as a whole. If we or our customers fail to comply with such laws and regulations, we could incur liabilities and fines and our operations could be suspended.

In addition, as climate change concerns become more prevalent, the U.S. and foreign governments have sought to limit the effects of any such changes. This increasing governmental focus on climate change may result in new environmental regulations that may negatively affect us, our suppliers and our customers. This could cause us to

incur additional direct costs or obligations in complying with any new environmental regulations and reporting requirements, as well as increased indirect costs resulting from our customers, suppliers or both incurring additional compliance costs that get passed on to us. These costs may adversely impact our operations and financial condition.

If our manufacturing processes and services do not comply with applicable regulatory requirements, or if we manufacture products containing design or manufacturing defects, demand for our services may decline and we may be subject to liability claims.

We predominantly manufacture and design products to our customers’ specifications; in some cases, our processes and facilities must comply with applicable regulatory requirements. For example, medical devices that we manufacture or design, as well as the facilities and manufacturing processes that we use to produce them, are regulated by the U.S. Food and Drug Administration or non-U.S. counterparts of this agency. Similarly, items we manufacture for customers in the A&D industries, as well as the processes we use to produce them, are regulated by the Department of Defense and the Federal Aviation Authority, which have increased their focus and penalties related to counterfeit materials. In addition, our customers’ products and the manufacturing processes or documentation that we use to produce them often are highly complex. As a result, products that we manufacture may at times contain manufacturing or design defects, and our manufacturing processes may be subject to errors or noncompliant with applicable statutory and regulatory requirements. Defects in the products we manufacture or design, whether caused by a design, manufacturing or component failure or error, or deficiencies in our manufacturing processes, may result in delayed shipments to customers or reduced or cancelled customer orders. If these defects or deficiencies are significant, our business reputation could also be damaged. The failure of our products, manufacturing processes or facilities to comply with applicable statutory and regulatory requirements could subject us to fines or penalties and, in some cases, require us to shut down or incur considerable expense to correct a product, process or facility. In addition, these defects may result in liability claims against us or expose us to liability to pay for the recall of a product. The magnitude of any such claim may increase as we expand our medical and aerospace and defense manufacturing services, as defects in medical, aerospace or defense devices or systems could seriously harm or kill users of these products and others. Even if our customers are responsible for the defects, they may not, or may not have resources to, assume responsibility for any costs or liabilities arising from these defects, which could expose us to additional liability claims.

Technology Risks

If we are unable to maintain our technological and manufacturing process expertise, our business could be adversely affected.

The market for our manufacturing and engineering services is characterized by rapidly changing technology and continuing process development. We are continually evaluating the advantages and feasibility of new manufacturing processes. We believe that our future success will depend upon our ability to develop and provide manufacturing services that meet our customers’ changing needs. This requires that we maintain technological leadership and successfully anticipate or respond to technological changes in manufacturing processes on a cost-effective and timely basis. Our failure to maintain our technological and manufacturing process expertise could have a material adverse effect on our business.

Our operations are subject to cyberattacks that could have a material adverse effect on our business.

We are increasingly dependent on digital technologies and services to conduct our business. We use these technologies for internal purposes, including data storage, processing and transmissions, as well as in our interactions with customers and suppliers. Examples of these digital technologies include ERP, shop floor control, test equipment, and other similar business applications, our global infrastructure and networks as well as external systems, analytics, automation, and cloud services. Digital technologies and services are subject to the risk of cyberattacks and, given the nature of such attacks, some incidents can remain undetected for a period of time despite our efforts to detect and respond to them in a timely manner. In particular, as discussed further below, our operations have been, and may in the future be, subject to ransomware or cyber-extortion attacks, which could significantly disrupt our operations. Generally, such attacks involve restricting access to computer systems or vital data.

We routinely monitor our systems for cyber threats and have processes in place to detect and remediate vulnerabilities. Nevertheless, we have experienced cyberattacks and attempted breaches, including phishing emails and other targeted attacks. In the fourth quarter of fiscal 2019, a ransomware incident encrypted information on our systems and disrupted customer and employee access to our systems and services, which resulted in the Company incurring costs relating to this event, including to retain third party consultants and forensic experts to assist with the restoration and remediation of systems and, with the assistance of law enforcement, to investigate the attack, as well as increased expenditures for our information technology (IT) infrastructure, systems and network. This ransomware

incident also adversely affected our operations and the Company’s fourth quarter 2019 revenue. See Note 18 to the consolidated financial statements in Part II, Item 8 of this Report for additional information.

Future cybersecurity incidents could result in the misappropriation of confidential information of the Company or that of its customers, employees, business partners or others; litigation and potential liability; enforcement actions and investigations by regulatory authorities; loss of customers and contracts; damage to the Company’s reputation and/or otherwise harm its business. We also expect to incur substantial costs in the future to satisfy customer requirements (including costs arising from the U.S. government’s Cybersecurity Maturity Model Certification (CMMC) program) and to mitigate against cybersecurity attacks as threats are expected to continue to become more persistent and sophisticated. If our systems for protecting against cybersecurity risks prove not to be sufficient, we could be adversely affected by, among other things: loss of or damage to intellectual property, proprietary or confidential information, or customer, supplier, or employee data; interruption of our business operations; and increased costs required to prevent, respond to, or mitigate cybersecurity attacks. These risks could harm our reputation and our relationships with customers, suppliers, employees and other third parties, and may result in claims against us. These risks could have a material adverse effect on our business, consolidated results of operations and consolidated financial condition.

Any delay in the upgrade of our information systems could disrupt our operations and cause unanticipated increases in our costs.

We are currently upgrading our IT infrastructure and enterprise resource planning system, which we anticipate taking several years. Failure to complete the upgrade timely or at all could leave us with sites without the systems capability to flexibly support future customer requirements for manufacturing capabilities and data driven analytics, as well as result in unanticipated increases in costs.

Financial Risks

Our level of indebtedness may limit our flexibility in operating our business and reacting to changes in our business or industry, or prevent us from making payments on our debt or obtaining additional financing.

As of December 31, 2021, our total outstanding debt (excluding unamortized debt issuance costs and finance leases) was $131.3 million, all of which represented borrowings under our term loan facility (the Term Loan). Our level of indebtedness could have important consequences. For example, it could:

•

increase our vulnerability to general adverse economic and industry conditions;

•

impair our ability to obtain additional debt or equity financing in the future for working capital, capital expenditures, acquisitions or other purposes;

•

require us to dedicate a material portion of our cash flows from operations to the payment of principal and interest on our indebtedness, thereby reducing the availability of our cash flows to fund working capital needs, capital expenditures, acquisitions and other purposes;

•

expose us to the risk of increased interest rates since the Term Loan has a variable rate;

•

limit our flexibility in planning for, or reacting to, changes in our business or industry;

•

place us at a disadvantage compared to our competitors that have less debt; and

•

make it more difficult for us to satisfy our debt obligations.

Any of these risks could materially impact our ability to fund our operations or limit our ability to expand our business, which could have a material adverse effect on our business, financial condition and results of operations.

We are exposed to intangible asset risk; our goodwill may become impaired.

We have recorded intangible assets, including goodwill, in connection with business acquisitions. We are required to assess goodwill and intangible assets for impairment at least on an annual basis and whenever events or circumstances indicate that the carrying value may not be recoverable from estimated future cash flows. A significant and sustained decline in our market capitalization could result in material charges in future periods that could be adverse to our operating results and financial position. As of December 31, 2021, we had $192.1 million in goodwill and $64.2 million of identifiable intangible assets. See Note 1(i) to the consolidated financial statements in Part II, Item 8 of this Report.

We may be exposed to interest rate fluctuations.

We have exposure to interest rate risk on our outstanding borrowings under our variable rate credit agreement. These borrowings’ interest rates are based on the spread, at our option, over the London interbank offered rate

(LIBOR), the bank’s prime rate or the federal funds rate. We are also exposed to interest rate risk on our invested cash balances.

The elimination of LIBOR could adversely affect our business, results of operations or financial condition. Borrowings under our credit facilities use LIBOR as a benchmark for establishing the applicable interest rate. The UK’s Financial Conduct Authority announced that sometime after 2021 it would no longer persuade or compel panel banks to submit the rates required to calculate LIBOR. The consequences of these developments with respect to LIBOR cannot be entirely predicted but could result in an increase in the cost of our variable rate indebtedness causing a negative impact on our financial position, liquidity and results of operations. Specifically, the use of an alternative reference rate could result in increased costs, including increased interest expense on our borrowings, and increased borrowing costs in the future. Management continues to evaluate the LIBOR exposure risks.

Risks Related to the Ownership of Our Common Shares

We may experience fluctuations in quarterly results.

Our quarterly results may vary significantly depending on various factors, many of which are beyond our control. These factors include:

•

the volume of customer orders relative to our capacity;

•

customer introduction and market acceptance of new products;

•

changes in demand for customer products;

•

seasonality in demand for customer products;

•

pricing and other competitive pressures;

•

the timing of our expenditures in anticipation of future orders;

•

our effectiveness in managing manufacturing processes;

•

changes in cost and availability of labor and components, including due to recent labor and supply constraints;

•

changes in our product mix;

•

changes in tax laws in the jurisdictions in which we operate;

•

changes in tariffs, trade agreements and other trade protection measures;

•

fluctuations in currency exchange rates;

•

changes in political and economic conditions;

•

disruptions caused by computer malfunctions or cybersecurity incidents; and

•

local factors and events that may affect our production volume, such as local holidays, pandemics or natural disasters.

Additionally, as is the case with many high technology companies, a significant portion of our shipments typically occur in the last few weeks of a given quarter. Accordingly, sales shifts from quarter to quarter may not be readily apparent until the end of a given quarter and may have a significant effect on projected and reported results. Further, the price of our common shares may experience volatility in response to fluctuating quarterly results.

Provisions in our governing documents and state law may make it harder for others to obtain control of the Company.

BHE US Equity

BHE · 10-K · period ended 2021-12-31

Item 1. Business.

Item 1A.Risk Factors.

BHE US Equity☆

BHE · 10-K · period ended 2021-12-31

Item 1. Business.

Item 1A.Risk Factors.

BHE US Equity