Skip to content
KStart free
AI InfrastructureDefenseQuantumAll studies →

ACET US Equity

Adicet Bio, Inc.Health Care · Pharmaceutical Preparations · CIK 1720580 · FY ends Dec 26
$9.19
-0.19 (-2.03%)
USD · as of 2026-08-21 · marketstack

ACET · 10-K · period ended 2021-12-31

← all ACET documents
filed 2022-03-15 · EDGAR original ↗

Our rendering of the filing — original pagination and typography are not reproduced, and tables are reduced to their short label cells (the figures live on FA). Nothing is summarized: every line below is the filing's own text.

blocks 6631,151 of 2,404636k characters rendered

Item 1A. Risk Factors.

Investing in our common stock involves a high degree of risk. In evaluating the Company and our business, you should carefully consider the following risks and uncertainties, together with all other information in this Annual Report on Form 10-K, including our consolidated financial statements and related notes and “Management’s Discussion and Analysis of Results of Operations and Financial Condition,” as well as our other filings with the Securities and Exchange Commission (SEC), before investing in our common stock. Any of the risk factors we describe below could adversely affect our business, financial condition or results of operations. The market price of our common stock could decline if one or more of these risks or uncertainties actually occur, causing you to lose all or part of your investment in our common stock. The risks and uncertainties we describe below are not the only ones we face. Additional risks and uncertainties that we currently do not know about or that we currently believe to be immaterial may also impair our business. Certain statements below are forward-looking statements. See “Special Note Regarding Forward-Looking Statements and Industry Data” in this Annual Report on Form 10-K.

Risks Related to Our Business and Industry

Risks Related to Operating History

We have a limited operating history and face significant challenges and expense as we build our capabilities.

Biopharmaceutical product development is a highly speculative undertaking and involves a substantial degree of risk. We began operation in November 2014. We have a limited operating history upon which someone can evaluate our business and prospects and is subject to the risks inherent in any early stage company, including, among other things, risks that we may not be able to hire sufficient qualified personnel and establish operating controls and procedures. We currently do not have complete in-house resources to enable our gamma delta T cell platform. As we build our own capabilities, we expect to encounter risks and uncertainties frequently experienced by growing companies in new and rapidly evolving fields, including the risks and uncertainties described herein. Consequently, any predictions made about our future success or viability may not be as accurate as they could be if we had a history of successfully developing and commercializing biopharmaceutical products.

We have incurred net losses in every period since our inception and anticipate that we will incur substantial net losses in the future.

We are an early clinical stage biopharmaceutical company. Investment in biopharmaceutical product development is highly speculative because it entails substantial upfront capital expenditures and significant risk that any potential product candidate will fail to demonstrate adequate effect or an acceptable safety profile, gain regulatory approval and become commercially viable. We have no products approved for commercial sale and have not generated any revenue from product sales to date, and we will continue to incur significant research and development and other expenses related to our ongoing operations. As a result, we are not profitable and have incurred net losses in each period since our inception. To date, we have financed our operations primarily with proceeds from our license and collaboration agreements and the issuance and sale of our capital stock, including a follow-on public offering in December 2021 which raised net proceeds of approximately $94.2 million from the sale of our common stock. For the years ended December 31, 2021 and 2020, we reported net losses of $62.0 million and $36.7 million, respectively. As of December 31, 2021, we had an accumulated deficit of $168.3 million.

We expect to incur significant expenditures for the foreseeable future, and we expect these expenditures to increase as we continue our research and development of, and seek regulatory approvals for, product candidates based on our gamma delta T cell platform, including ADI-001. Even if we succeed in commercializing one or more of our product candidates, we will continue to incur substantial research and development and other expenditures to develop and market additional product candidates. We may encounter unforeseen expenses, difficulties, complications, delays and other unknown factors that may adversely affect our business. The size of our future net losses will depend, in part, on the rate of future growth of our expenses and our ability to generate revenue. Our prior losses and expected future losses have had and will continue to have an adverse effect on our stockholders’ equity and working capital. Further, even if we do achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual basis. Our failure to become and remain profitable would depress the value of our company and could impair our ability to raise capital, expand our business, maintain our research and development efforts, diversify our product candidates or even continue our operations, any of which could have a material adverse effect on our business, financial condition, results of operations, and prospects and cause investors to lose all or part of their investments.

46

Our history of recurring losses and anticipated expenditures could raise substantial doubts about our ability to continue as a going concern.

In our financial statements for the period ending to December 31, 2020, we concluded that our recurring losses from operations and need for additional financing to fund future operations raised substantial doubt about our ability to continue as a going concern. Similarly, our independent registered public accounting firm included an explanatory paragraph in its report on our financial statements for the period ended December 31, 2020 with respect to this uncertainty. As of December 31, 2021, we believe that with our existing cash and cash equivalents we are able to fund our expenses and capital expenditure requirements beyond twelve months from the issuance of these financial statements and into the second half of 2024. Our ability to continue as a going concern beyond this point will require us to obtain additional funding. If we are unable to obtain sufficient funding, our business, prospects, financial condition and results of operations will be materially and adversely affected, and we may be unable to continue as a going concern. If we are unable to raise capital when needed or on acceptable terms, we would be forced to delay, limit, reduce or terminate our product development or future commercialization efforts of one or more of our product candidates, or may be forced to reduce or terminate our operations. If we are unable to continue as a going concern, we may have to liquidate our assets and may receive less than the value at which those assets are carried on our audited financial statements, and it is likely that investors will lose all or a part of their investment. In our own future required quarterly assessments, we may again conclude that there is substantial doubt about our ability to continue as a going concern, and future reports from our independent registered public accounting firm may also contain statements expressing substantial doubt about our ability to continue as a going concern. If we seek additional financing to fund our business activities in the future and there exists substantial doubt about our ability to continue as a going concern, investors or other financing sources may be unwilling to provide additional funding to us on commercially reasonable terms, if at all.

Risks Related to Our Product Candidates

Our business is highly dependent on the success of ADI-001. If we are unable to obtain approval for ADI-001 and effectively commercialize ADI-001 for the treatment of patients in our approved indications, our business would be significantly harmed.

Our business and future success depends on our ability to obtain regulatory approval of, and then successfully commercialize, our most advanced product candidate, ADI-001. ADI-001 is in the early stages of development with an ongoing Phase 1 study to assess the safety and efficacy of ADI-001 in Non-Hodgkin's Lymphoma (NHL) patients that commenced in March 2021.

Our preclinical or clinical results to date may not predict results for our planned or ongoing trials or any future studies of ADI-001 or any other allogeneic gamma delta T cell product candidate. Because of the lack of evaluation of allogeneic products and gamma delta T cell therapy products in the clinic to date, any such product’s failure, or the failure of other allogeneic T cell therapies or gamma delta T cell therapies, may significantly influence physicians’ and regulators’ opinions in regards to the viability of our entire pipeline of allogeneic T cell therapies, which could have a material adverse effect on our reputation. If our gamma delta T cell therapy is viewed as less safe or effective than autologous therapies or other allogeneic T cell therapies, our ability to develop other allogeneic gamma delta T cell therapies may be significantly harmed.

All of our product candidates, including ADI-001 , will require additional clinical and non-clinical development, regulatory review and approval in multiple jurisdictions, substantial investment, access to sufficient commercial manufacturing capacity and significant marketing efforts before we can generate any revenue from product sales. In addition, because ADI-001 is our most advanced product candidate, and because our other product candidates are based on similar technology, if ADI-001 encounters safety or efficacy problems, manufacturing problems, developmental delays, regulatory issues or other problems, our development plans and business would be significantly harmed, which could have a material adverse effect on our business, reputation and prospects.

Our gamma delta T cell candidates represent a novel approach to cancer treatment that creates significant challenges for us.

We are developing a pipeline of gamma delta T cell product candidates and a novel antibody platform that are intended for use in patient with certain cancers. Advancing these novel product candidates creates significant challenges for us, including:

manufacturing our product candidates to our specifications and in a timely manner to support our future clinical trials, and, if approved, commercialization;

sourcing future clinical and, if approved, commercial supplies for the raw materials used to manufacture our product candidates;

understanding and addressing variability in the quality of a donor’s T cells, which could ultimately affect our ability to produce product in a reliable and consistent manner;

inability to achieve efficacy in cancer patients following treatment with our product candidates;

47

achieving a side effect profile, including graft-versus-host disease (GvHD), from our product candidates that makes them commercially attractive for further development;

educating medical personnel regarding the potential side effect profile of our product candidates, if approved;

using medicines to manage adverse side effects of our product candidates which may not adequately control the side effects and/or may have a detrimental impact on the efficacy of the treatment;

conditioning patients with chemotherapy or other lymphodepletion agents in advance of administering our product candidates, which may increase the risk of adverse side effects;

obtaining regulatory approval, as the U.S. Food and Drug Administration (FDA) and other regulatory authorities have limited experience with development of allogeneic T cell therapies for cancer; and

establishing sales and marketing capabilities upon obtaining any regulatory approval to gain market acceptance of a novel therapy.

The success of our business, including our ability to obtain financing and generate any revenue in the future, will primarily depend on the successful development, manufacturing, positive efficacy and safety profile in our clinical trials, regulatory approval and commercialization of our novel product candidates, which may never occur. We have not yet succeeded and may not succeed in demonstrating efficacy and safety for any of our product candidates in clinical trials or in obtaining marketing approval thereafter. Given our early stage of development, it may be several years, if at all, before we have demonstrated the safety and efficacy of a product candidate sufficient to warrant approval for commercialization. If we are unable to develop, or obtain regulatory approval for, or, if approved, successfully commercialize our product candidates, we may not be able to generate sufficient revenue to continue our business, which could have a material adverse effect on our results of operations and prospects.

Our product candidates are based on novel technologies, which makes it difficult to predict the likely success of such product candidates and the time and cost of product candidate development and obtaining regulatory approval.

We have concentrated our research and development efforts on our allogeneic gamma delta T cell therapy and our future success depends on the successful development of this therapeutic approach. We are in the early stages of developing our platform and product candidates and there can be no assurance that any development problems we have experienced or may experience in the future will not cause significant delays or result in unforeseen issues or unanticipated costs, or that any such development problems or issues can be overcome. We may also experience delays in developing a sustainable, reproducible and scalable manufacturing process or transferring that process to commercial partners, which may prevent us from completing our future clinical studies or commercializing our products on a timely or profitable basis, if at all. In addition, our expectations with regard to the advantages of an allogenic gamma delta T cell therapy platform relative to other therapies may not materialize or materialize to the degree we anticipate. Further, our scalability and costs of manufacturing may vary significantly as we develop our product candidates and understand these critical factors.

In addition, the clinical study requirements of the FDA, European Medicines Agency (EMA) and other regulatory agencies and the criteria these regulators use to determine the safety and efficacy of a product candidate are determined according to the type, complexity, novelty and intended use and market of the potential products. The regulatory approval process for novel product candidates such as ours can be more complex and consequently more expensive and take longer than for other, better known or extensively studied pharmaceutical or other product candidates. Approvals by the EMA and FDA for existing autologous CAR-T therapies, such as Kymriah® and Yescarta®, may not be indicative of what these regulators may require for approval of our therapies. Also, while we expect reduced variability in our products candidates compared to autologous products, we do not have significant clinical data supporting any benefit of lower variability. More generally, approvals by any regulatory agency may not be indicative of what any other regulatory agency may require for approval or what such regulatory agencies may require for approval in connection with new product candidates.

Our product candidates may also not perform successfully in clinical trials or may be associated with adverse events that distinguish them from the autologous CAR-T therapies that have previously been approved or alpha beta T cell therapies that may be approved in the future. Unexpected clinical outcomes could materially and adversely affect our business, results of operations and prospects.

48

Our product candidates may cause undesirable side effects or have other properties that could halt our clinical development, prevent our regulatory approval, limit our commercial potential or result in significant negative consequences.

Undesirable or unacceptable side effects caused by our product candidates could cause us or regulatory authorities to interrupt, delay or halt clinical trials and could result in a more restrictive label or the delay or denial of regulatory approval by the FDA or other comparable foreign regulatory authorities. Results of our clinical trials could reveal a high and unacceptable severity and prevalence of side effects or unexpected characteristics. Approved autologous CAR-T therapies and those under development have shown frequent rates of cytokine release syndrome and neurotoxicity, and adverse events have resulted in the death of patients. While we believe our gamma delta T cell approach may lessen such results, similar or other adverse events for our allogeneic gamma delta T cell product candidates may occur. In addition, while we anticipate our focus on gamma delta T cells may lessen the likelihood of GvHD relative to therapies relying on unrelated alpha beta T cells, similar or other adverse events for our allogeneic gamma delta T cell product candidates may occur.

If unacceptable toxicities arise in the development of our product candidates, we could suspend or terminate our trials or the FDA or comparable foreign regulatory authorities could order us to cease clinical trials or deny approval of our product candidates for any or all targeted indications. The data safety monitoring board may also suspend or terminate a clinical trial at any time on various grounds, including a finding that the research patients are being exposed to an unacceptable health risk, including risks inferred from other unrelated immunotherapy trials. Treatment-related side effects could also affect patient recruitment or the ability of enrolled subjects to complete the trial or result in potential product liability claims. Novel therapeutic candidates, such as those we are developing, may result in novel side effect profiles that may not be appropriately recognized or managed by the treating medical staff. We anticipate having to train medical personnel using our product candidates to understand the side effect profile of our product candidates for our clinical trials and upon any commercialization of any of our product candidates. Inadequate training in recognizing or managing the potential side effects of our product candidates could result in serious adverse events including patient deaths. Based on available preclinical data and on management’s clinical experience with other cell therapy agents, the safety profile of our pipeline product candidates is expected to include cytokine release syndrome, neurotoxicity, and possibly additional adverse events. Any of these occurrences may have a material adverse effect our business, financial condition and prospects.

Risks Related to Clinical Trials

Our clinical trials may fail to demonstrate the safety and efficacy of any of our product candidates, which would prevent or delay regulatory approval and commercialization.

Before obtaining regulatory approvals for the commercial sale of our product candidates, including ADI-001 and ADI-002, we must demonstrate through lengthy, complex and expensive preclinical testing and clinical trials that our product candidates are both safe and effective for use in each target indication. Clinical testing is expensive and can take many years to complete, and its outcome is inherently uncertain. Failure can occur at any time during the clinical trial process. The results of preclinical studies and early clinical trials of our product candidates may not be predictive of the results of later-stage clinical trials.

There is typically an extremely high rate of attrition from the failure of product candidates proceeding through clinical trials. Product candidates in later stages of clinical trials may fail to show the desired safety and efficacy profile despite having progressed through preclinical studies and initial clinical trials. A number of companies in the biopharmaceutical industry have suffered significant setbacks in advanced clinical trials due to lack of efficacy, insufficient durability of efficacy or unacceptable safety issues, notwithstanding promising results in earlier trials. Most product candidates that commence clinical trials are never approved as products.

In addition, for ADI-001 and ADI-002 and any future trials that may be completed, we cannot guarantee that the FDA or foreign regulatory authorities will interpret the results as we do, and more trials could be required before we submit our product candidates for approval. To the extent that the results of the trials are not satisfactory to the FDA or foreign regulatory authorities for support of a marketing application, approval of our product candidates may be significantly delayed, or we may be required to expend significant additional resources, which may not be available to us, to conduct additional trials in support of potential approval of our product candidates. Any of the foregoing could have a material adverse effect on our business, prospects and financial condition.

We may not be able to file investigational new drug (IND) applications to commence additional clinical trials on the timelines we expect, and even if we are able to, the FDA may not permit us to proceed.

In October 2020, the IND for our lead product candidate, ADI-001, to treat patients with NHL was cleared by the FDA. Even if such regulatory authorities agree with the design and implementation of the clinical trials set forth in an IND or clinical trial application, we cannot guarantee that such regulatory authorities will not change their requirements in the future. Moreover, we cannot be sure that submission of an IND for any of our other product candidates will result in the FDA allowing trials to begin, or that, once begun, issues will not arise that result in a decision by us, by independent Institutional Review Boards (IRBs) or independent ethics committees, or by the FDA or other regulatory authorities to suspend or terminate clinical trials. For

49

example, we may experience manufacturing delays or other delays with IND-enabling studies or the FDA or other regulatory authorities may require additional preclinical studies that we did not anticipate. Moreover, we cannot be assured that submission of an IND will result in the FDA allowing clinical trials to begin, or that, once begun, issues will not arise that result in a decision by us, by IRBs, or independent ethics committees or by the FDA or other regulatory authorities to suspend or terminate clinical trials, including as a result of a clinical hold. Additionally, even if such regulatory authorities agree with the design and implementation of the clinical trials set forth in an IND or clinical trial application, we cannot guarantee that such regulatory authorities will not change their requirements in the future. The inability to initiate clinical trials any of our product candidates on the timeline currently anticipated or at all could have a material adverse effect on our business, results of operations and prospects.

We may encounter substantial delays in our clinical trials, or may not be able to conduct our trials on the timelines we expect.

Clinical testing is expensive, time consuming and subject to uncertainty. We cannot guarantee that any clinical studies will be conducted as planned or completed on schedule, if at all. Even if these trials begin as planned, issues may arise that could suspend or terminate such clinical trials. A failure of one or more clinical studies can occur at any stage of testing, and our future clinical studies may not be successful. Events that may prevent successful or timely completion of clinical development include:

inability to generate sufficient preclinical, toxicology or other in vivo or in vitro data to support the initiation of clinical studies;

delays in sufficiently developing, characterizing or controlling a manufacturing process suitable for advanced clinical trials;

delays in developing suitable assays for screening patients for eligibility for trials with respect to certain product candidates;

delays in reaching a consensus with regulatory agencies on study design;

delays in reaching agreement on acceptable terms with prospective contract research organizations (CROs) and clinical study sites, the terms of which can be subject to extensive negotiation and may vary significantly among different CROs and clinical study sites;

delays in obtaining required IRB approval at each clinical study site;

imposition of a temporary or permanent clinical hold by regulatory agencies for a number of reasons, including after review of an IND application or amendment, or equivalent application or amendment; as a result of a safety finding that presents unreasonable risk to clinical trial participants; a negative finding from an inspection of our clinical study operations or study sites; developments on trials conducted by competitors for related technology that raises FDA concerns about risk to patients of the technology broadly; or if FDA finds that the investigational protocol or plan is clearly deficient to meet its stated objectives;

delays in recruiting suitable patients to participate in our clinical studies;

difficulty collaborating with patient groups and investigators;

failure by our CROs, other third parties or it to adhere to clinical study requirements;

failure to perform in accordance with the FDA’s Good Clinical Practice (GCP) requirements or applicable regulatory guidelines in other countries;

transfer of manufacturing processes to any new contract manufacturing organization (CMO) or our own manufacturing facilities or any other development or commercialization partner for the manufacture of product candidates;

delays in having patients’ complete participation in a study or return for post-treatment follow-up;

patients dropping out of a study;

occurrence of adverse events associated with the product candidate that are viewed to outweigh its potential benefits;

changes in regulatory requirements and guidance that require amending or submitting new clinical protocols;

50

changes in the standard of care on which a clinical development plan was based, which may require new or additional trials;

the cost of clinical studies of our product candidates being greater than we anticipate;

clinical studies of our product candidates producing negative or inconclusive results, which may result in us deciding, or regulators requiring us, to conduct additional clinical studies or abandon product development programs;

delays or failure to secure supply agreements with suitable raw material suppliers, or any failures by suppliers to meet our quantity or quality requirements for necessary raw materials; and

delays in manufacturing, testing, releasing, validating, or importing/exporting sufficient stable quantities of our product candidates for use in clinical studies or the inability to do any of the foregoing.

Our timing of filing on these product candidates is dependent on further preclinical and manufacturing success, which we work on with various third parties. We cannot be sure that we will be able to submit our INDs in a timely manner, if at all, or that submission of an IND or IND amendment will result in the FDA allowing testing and clinical trials to begin, or that, once begun, issues will not arise that suspend or terminate such clinical trials. Additionally, even if such regulatory authorities agree with the design and implementation of the clinical trials set forth in an IND or clinical trial application, we cannot guarantee that such regulatory authorities will not change their requirements in the future.

Any inability to successfully complete preclinical and clinical development could result in additional costs to us or impair our ability to generate revenue. In addition, if we make manufacturing or formulation changes to our product candidates, we may be required to or we may elect to conduct additional studies to bridge our modified product candidates to earlier versions. Clinical study delays could also shorten any periods during which our products have patent protection and may allow our competitors to bring products to market before we do, which could impair our ability to successfully commercialize our product candidates and may harm our business and results of operations.

Monitoring safety of patients receiving our product candidates is challenging, which could adversely affect our ability to obtain regulatory approval and commercialize.

In our planned clinical trials of our product candidates, we have contracted with and expect to continue to contract with academic medical centers and hospitals experienced in the assessment and management of toxicities arising during clinical trials. Nonetheless, these centers and hospitals may have difficulty observing patients and treating toxicities, which may be more challenging due to personnel changes, inexperience, shift changes, house staff coverage or related issues. This could lead to more severe or prolonged toxicities or even patient deaths, which could result in us or the FDA delaying, suspending or terminating one or more of our clinical trials, and which could jeopardize regulatory approval. Medicines used at centers to help manage adverse side effects of ADI-001 and ADI-002 may not adequately control the side effects and/or may have a detrimental impact on the efficacy of the treatment. Use of these medicines may increase with new physicians and centers administering our product candidates, any of which could have a material adverse effect on our ability to obtain regulatory approval and commercialize on the timelines anticipated or at all, which could have a material adverse effect on our business and results of operations.

If we encounter difficulties enrolling patients in our clinical trials, our clinical development activities could be delayed or otherwise adversely affected.

We may experience difficulties in patient enrollment in our clinical trials for a variety of reasons, including, without limitation, the impact of the ongoing COVID-19 pandemic. The timely completion of clinical trials in accordance with the protocols depends, among other things, on our ability to enroll a sufficient number of patients who remain in the study until the conclusion. The enrollment of patients depends on many factors, including:

the patient eligibility criteria defined in the protocol;

the size of the patient population required for analysis of the trial’s primary endpoints;

the proximity of patients to study sites;

the design of the trial;

Our ability to recruit clinical trial investigators with the appropriate competencies and experience;

Our ability to obtain and maintain patient consents; and

51

the risk that patients enrolled in clinical trials will drop out of the trials before the infusion of our product candidates or trial completion.

We intend to conduct a number of clinical trials for product candidates in the fields of cancer in different geographies, all of which have been affected to varying extents by the ongoing COVID-19 pandemic. We believe that the coronavirus pandemic will have an impact on various aspects of our future clinical trials. For example, investigators may not want to take the risk of exposing cancer patients to COVID-19 since the dosing of patients is conducted within an in-patient setting. Other potential impacts of the COVID-19 pandemic on our future various clinical trials include patient dosing and study monitoring, which may be paused or delayed due to changes in policies at various clinical sites, federal, state, local or foreign laws, rules and regulations, including quarantines or other travel restrictions, prioritization of healthcare resources toward pandemic efforts, including diminished attention of physicians serving as our clinical trial investigators and reduced availability of site staff supporting the conduct of our clinical trials, interruption or delays in the operations of the government regulators, or other reasons related to the COVID-19 pandemic. It is unknown how long these pauses or disruptions could continue.

In addition, our clinical trials will compete with other clinical trials for product candidates that are in the same therapeutic areas as our product candidates, and this competition will reduce the number and types of patients available to us because some patients who might have opted to enroll in our trials may instead opt to enroll in a trial being conducted by one of our competitors. Since the number of qualified clinical investigators is limited, some of our clinical trial sites are also being used by some of our competitors, which may reduce the number of patients who are available for our clinical trials in that clinical trial site.

Moreover, because our product candidates represent unproven methods for cancer treatment, potential patients and their doctors may be inclined to use conventional therapies, such as chemotherapy and hematopoietic cell transplantation or autologous CAR-T cell therapies, rather than enroll patients in our clinical trial. Patients eligible for allogeneic CAR-T cell therapies but ineligible for autologous CAR-T cell therapies due to aggressive cancer and inability to wait for autologous CAR-T cell therapies may be at greater risk for complications and death from therapy.

Delays in patient enrollment may result in increased costs or may affect the timing or outcome of our ongoing clinical trial and planned clinical trials, which could prevent completion of these trials and adversely affect our ability to advance the development of our product candidates.

Clinical trials are expensive, time-consuming and difficult to design and implement.

Human clinical trials are expensive and difficult to design and implement, in part because they are subject to rigorous regulatory requirements. Because our gamma delta T cell product candidates are based on new technologies and will require the creation of inventory of mass-produced, off-the-shelf products, we expect that we will require extensive research and development and have substantial manufacturing and processing costs. In addition, costs to treat patients with NHL cancer and to treat potential side effects that may result from our product candidates can be significant. Accordingly, our clinical trial costs are likely to be significantly higher than for more conventional therapeutic technologies or drug products, which is expected to have a material adverse effect on our financial position and ability to achieve profitability.

A variety of risks associated with conducting research and clinical trials abroad and marketing our product candidates internationally could materially adversely affect our business.

We plan to globally develop our product candidates. Accordingly, we expect that it will be subject to additional risks related to operating in foreign countries, including:

differing regulatory requirements in foreign countries;

unexpected changes in tariffs, trade barriers, price and exchange controls and other regulatory requirements;

increased difficulties in managing the logistics and transportation of storing and shipping product candidates produced in the United States and shipping the product candidate to the patient abroad;

import and export requirements and restrictions;

economic weakness, including inflation, or political instability in particular foreign economies and markets;

compliance with tax, employment, immigration and labor laws for employees living or traveling abroad;

foreign taxes, including withholding of payroll taxes;

52

foreign currency fluctuations, which could result in increased operating expenses and reduced revenue, and other obligations incident to doing business in another country;

difficulties staffing and managing foreign operations;

workforce uncertainty in countries where labor unrest is more common than in the United States;

differing payor reimbursement regimes, governmental payors or patient self-pay systems, and price controls;

potential liability under the Foreign Corrupt Practices Act or comparable foreign regulations;

challenges enforcing our contractual and intellectual property rights, especially in those foreign countries that do not respect and protect intellectual property rights to the same extent as the United States;

production shortages resulting from any events affecting raw material supply or manufacturing capabilities abroad; and

business interruptions resulting from geo-political actions, including war and terrorism.

These and other risks associated with our potential international operations may materially adversely affect our ability to attain or maintain profitable operations, which could have a material adverse effect on our business and results of operations.

Risks Related to Marketing Our Product Candidates

The market opportunities for our product candidates may be limited to those patients who are ineligible for or have failed prior treatments and may be small.

The FDA often approves new therapies initially only for use in patients who are currently not adequately treated with currently approved therapies. We expect to initially seek approval of ADI-001 and our other product candidates in this setting. Subsequently, for those products that prove to be sufficiently beneficial, if any, we would expect to seek approval in earlier lines of treatment and potentially as a first line therapy. There is no guarantee that our product candidates, even if approved, would be approved for earlier lines of therapy, and, prior to any such approvals, we will have to conduct additional clinical trials, including potentially comparative trials against approved therapies. We are also targeting a similar patient population as autologous CAR-T product candidates, including approved autologous CAR-T products. Our therapies may not be as safe and effective as autologous CAR-T therapies and may only be approved for patients who are ineligible for autologous CAR-T therapy.

Our projections of both the number of people who have the cancers we are targeting, as well as the subset of people with these cancers in a position to receive second or later lines of therapy and who have the potential to benefit from treatment with our product candidates, are based on our beliefs and estimates. These estimates have been derived from a variety of sources, including scientific literature, patient foundations, or market research and may prove to be incorrect. Further, new studies may change the estimated incidence or prevalence of these cancers. The number of patients may turn out to be lower than expected. Additionally, the potentially addressable patient population for our product candidates may be limited or may not be amenable to treatment with our product candidates. Even if we obtain significant market share for our product candidates, because the potential target populations are small, we may never achieve profitability without obtaining regulatory approval for additional indications.

If we fail to develop additional product candidates, our commercial opportunity will be limited.

One of our core strategies is to pursue clinical development of additional product candidates beyond ADI-001. Developing, obtaining regulatory approval and commercializing additional gamma delta T cell product candidates will require substantial additional funding and is prone to the risks of failure inherent in medical product development. We cannot provide you any assurance that it will be able to successfully advance any of these additional product candidates through the development process.

Even if we receive FDA approval to market additional product candidates for the treatment of cancer, we cannot assure you that any such product candidates will be successfully commercialized, widely accepted in the marketplace or more effective than other commercially available alternatives. If we are unable to successfully develop and commercialize additional product candidates, our commercial opportunity will be limited. Moreover, a failure in obtaining regulatory approval of additional product candidates may have a negative effect on the approval process of any other, or result in losing approval of any approved, product candidate which could have a material adverse effect on our business and prospects.

53

We currently have no marketing and sales organization and as a company have no experience in marketing products. If we are unable to establish marketing and sales capabilities or enter into agreements with third parties to market and sell our product candidates, we may not be able to generate product revenue.

We currently have no sales, marketing or distribution capabilities and as a company have no experience in marketing products. We may develop a marketing organization and sales force, which will require significant capital expenditures, management resources and time. We will have to compete with other pharmaceutical and biotechnology companies to recruit, hire, train and retain marketing and sales personnel.

If we are unable or decide not to establish internal sales, marketing and distribution capabilities, we will pursue collaborative arrangements regarding the sales and marketing of our products; however, there can be no assurance that we will be able to establish or maintain such collaborative arrangements, or if we are able to do so, that it will have effective sales forces. Any revenue we receive will depend upon the efforts of such third parties, which may not be successful. We may have little or no control over the marketing and sales efforts of such third parties and our revenue from product sales may be lower than if we had commercialized our product candidates ourselves. We also face competition in our search for third parties to assist us with the sales and marketing efforts of our product candidates.

There can be no assurance that we will be able to develop in-house sales and distribution capabilities or establish or maintain relationships with third-party collaborators to commercialize any product that receives regulatory approval in the United States or overseas. If we are unable to successfully market and distribute our products, our business, results of operations and prospects could be materially adversely affected.

We face significant competition from other biotechnology and pharmaceutical companies, and our operating results will suffer if we fail to compete effectively.

The biopharmaceutical industry, and the immuno-oncology industry specifically, is characterized by intense competition and rapid innovation. Our competitors may be able to develop other compounds or drugs that are able to achieve similar or better results. Our potential competitors include major multinational pharmaceutical companies, established biotechnology companies, specialty pharmaceutical companies and universities and other research institutions. Many of our competitors have substantially greater financial, technical and other resources, such as larger research and development staff and experienced marketing and manufacturing organizations and well-established sales forces. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large, established companies. Mergers and acquisitions in the biotechnology and pharmaceutical industries may result in even more resources being concentrated in our competitors. Competition may increase further as a result of advances in the commercial applicability of technologies and greater availability of capital for investment in these industries. Our competitors, either alone or with collaborative partners, may succeed in developing, acquiring or licensing on an exclusive basis drug or biologic products that are more effective, safer, more easily commercialized or less costly than our product candidates or may develop proprietary technologies or secure patent protection that we may need for the development of our technologies and products.

Specifically, engineered T cells face significant competition in both the chimeric antigen receptor (CAR) and T cell receptor (TCR) technology space from multiple companies. Even if we obtain regulatory approval of our product candidates, the availability and price of our competitors’ products could limit the demand and the price we are able to charge for our product candidates. We may not be able to implement our business plan if the acceptance of our product candidates is affected by price competition or the reluctance of physicians to switch from existing methods of treatment to our product candidates, or if physicians switch to other new drug or biologic products or choose to reserve our product candidates for use in limited circumstances.

Risks Related to Manufacturing

We do not currently operate our own manufacturing facility and currently depend on the ability of our third-party suppliers and manufacturers with whom we contract to perform adequately, particularly with respect to the timely production and delivery of our product candidates, including ADI-001. This reliance on third parties increases the risk that we will not have sufficient quantities of our product candidates or products or such quantities at an acceptable cost, which could delay, prevent or impair our development or commercialization efforts.

We do not currently own or operate any manufacturing facilities. We rely, and expect to continue to rely, on third parties for the manufacture of our product candidates for preclinical and clinical development. We may not be able to achieve clinical or commercial manufacturing and cell processing on our own or through our contract manufacturing organizations (CMOs), including timely supply of off-the-shelf product to satisfy demands to support clinical trials of any of our product candidates. Very few companies have experience in manufacturing gamma delta T cell therapy derived from blood of unrelated donors and gamma delta T cells require several complex manufacturing steps before being available as a mass-produced, off-the-shelf product. While we believe our manufacturing and processing approaches are appropriate to support our clinical product development, we have limited experience in managing the allogeneic gamma delta T cell engineering process, and our allogeneic

54

processes may be more difficult or more expensive than the approaches taken by our competitors. We cannot be sure that the manufacturing processes employed by or on our behalf will result in T cells that will be safe and effective.

Our operations remain subject to review and oversight by the FDA and the FDA could object to our use of any manufacturing facilities. We must first receive approval from the FDA prior to licensure to manufacture our product candidates, which we may never obtain. Even if approved, we would be subject to ongoing periodic unannounced inspection by the FDA and corresponding state agencies to ensure strict compliance with current Good Manufacturing Practices (cGMPs) and other government regulations. Our license to manufacture product candidates will be subject to continued regulatory review.

Our cost of goods development is at an early stage. The actual cost to manufacture and process our product candidates could be greater than we expect and could materially and adversely affect the commercial viability of our product candidates.

The manufacture of biopharmaceutical products is complex and requires significant expertise, including the development of advanced manufacturing techniques and process controls. Manufacturers of cell therapy products often encounter difficulties in production, particularly in scaling out and validating initial production and ensuring the absence of contamination. These problems include difficulties with production costs and yields, quality control, including stability of the product, quality assurance testing, operator error, shortages of qualified personnel, as well as compliance with strictly enforced federal, state and foreign regulations. Furthermore, if contaminants are discovered in our supply of product candidates or in the manufacturing facilities, such manufacturing facilities may need to be closed for an extended period of time to investigate and remedy the contamination. We cannot assure you that any stability or other issues relating to the manufacture of our product candidates will not occur in the future.

Our product candidates and any products that we may develop may compete with other product candidates and approved products for access to manufacturing facilities. There are a limited number of manufacturers that operate under cGMP regulations and that might be capable of manufacturing for us.

We may fail to manage the logistics of storing and shipping our product candidates. Storage failures and shipment delays and problems caused by us, our vendors or other factors not in our control, such as weather, could result in loss of usable product or prevent or delay the delivery of product candidates to patients.

We may also experience manufacturing difficulties due to resource constraints or as a result of labor disputes. If we were to encounter any of these difficulties, our ability to provide our product candidates to patients would be jeopardized, which could have a material adverse effect on our business, results of operations and prospects.

Risks Related to Our Operations

We are highly dependent on our key personnel, and if we are not successful in attracting and retaining highly qualified personnel, we may not be able to successfully implement our business strategy.

Our ability to compete in the highly competitive biotechnology and pharmaceutical industries depends upon our ability to attract and retain highly qualified managerial, scientific and medical personnel. We are highly dependent on our management, scientific and medical personnel. The loss of the services of any of our executive officers, other key employees, and other scientific and medical advisors, and our inability to find suitable replacements could result in delays in product development and harm our business.

We conduct substantially all of our operations at our facilities in the San Francisco Bay Area. This region is headquarters to many other biopharmaceutical companies and many academic and research institutions. Competition for skilled personnel in this market is intense and may limit our ability to hire and retain highly qualified personnel on acceptable terms or at all.

To induce valuable employees to remain at the company, in addition to salary and cash incentives, we have provided stock options and restricted stock units that vest over time. The value to employees of stock options that vest over time may be significantly affected by fluctuations in our stock price that are beyond our control and may at any time be insufficient to counteract more lucrative offers from other companies. Despite our efforts to retain valuable employees, members of our management, scientific and development teams may terminate their employment with us on short notice. Although we have employment agreements with our key employees, these employment agreements provide for at-will employment, which means that any of our employees could leave our employment at any time, with or without notice. We do not maintain “key person” insurance policies on the lives of these individuals or the lives of any of our other employees. Our success also depends on our ability to continue to attract, retain and motivate highly skilled junior, mid-level and senior managers as well as junior, mid-level and senior scientific and medical personnel.

55

We will need substantial additional financing to develop our products and implement our operating plans. If we fail to obtain additional financing, we may be unable to complete the development and commercialization of our product candidates.

We expect to spend a substantial amount of capital in the clinical development of our product candidates, including the ongoing Phase 1 clinical trial for ADI-001. We will need substantial additional financing to develop our products and implement our operating plans. In particular, we will require substantial additional financing to enable commercial production of our products and initiate and complete registration trials for multiple products. Further, if approved, we will require significant additional amounts in order to launch and commercialize our product candidates.

As of December 31, 2021, we believe that with our cash and cash equivalents we are able to fund our expenses and capital expenditure requirements beyond twelve months from the issuance date of the accompanying consolidated financial statements. However, changing circumstances may cause us to consume capital significantly faster than we currently anticipate, and we may need to spend more money than currently expected because of circumstances beyond our control. We may require additional capital for the further development and commercialization of our product candidates, including funding our internal manufacturing capabilities and may need to raise additional funds sooner if we choose to expand more rapidly than we presently anticipate.

We cannot be certain that additional funding will be available on acceptable terms, or at all. Other than the funding agreement and our loan agreement with Pacific Western Bank, we have no committed source of additional capital and if we are unable to raise additional capital in sufficient amounts or on terms acceptable to us, we may have to significantly delay, scale back or discontinue the development or commercialization of our product candidates or other research and development initiatives. Our license agreements may also be terminated if we are unable to meet the payment obligations under the agreements. We could be required to seek collaborators for our product candidates at an earlier stage than otherwise would be desirable or on terms that are less favorable than might otherwise be available or relinquish or license on unfavorable terms our rights to our product candidates in markets where we otherwise would seek to pursue development or commercialization themselves. Additionally, we may not be able to incur indebtedness if the ongoing macroeconomic effects of the COVID-19 pandemic, including certain actions taken by U.S. or other governmental authorities, such as decreases in short-term interest rates as announced by the Federal Reserve, cause the closure of banks for an extended period of time or a sudden increase in requests for indebtedness at one time by many potential borrowers, either or both of which could overwhelm the banking industry. Furthermore, the impact of geopolitical tension, such as a deterioration in the bilateral relationship between the United States and China or an escalation in conflict between Russia and Ukraine, including any resulting sanctions, export controls or other restrictive actions, also could lead to disruption, instability and volatility in the global markets, which may have an impact on our ability to obtain additional funding.

Any of the above events could significantly harm our business, prospects, financial condition and results of operations and cause the price of our common stock to decline.

We have grown rapidly and will need to continue to grow the size of our organization, and it may experience difficulties in managing this growth.

As our development and commercialization plans and strategies develop, and as we transition into operating as a public company, we have rapidly expanded our employee base and expect to continue to add managerial, operational, sales, research and development, marketing, financial and other personnel. Current and future growth imposes significant added responsibilities on members of management, including:

identifying, recruiting, integrating, maintaining and motivating additional employees;

managing our internal development efforts effectively, including the clinical and FDA review process for our product candidates, while complying with our contractual obligations to contractors and other third parties; and

improving our operational, financial and management controls, reporting systems and procedures.

Our future financial performance and our ability to commercialize our product candidates will depend, in part, on our ability to effectively manage our growth, and our management may also have to divert a disproportionate amount of our attention away from day-to-day activities in order to devote a substantial amount of time to managing these growth activities.

We currently rely, and for the foreseeable future will continue to rely, in substantial part on certain independent organizations, advisors and consultants, pursuant to arrangements which expire after a certain period of time, to provide certain services, including certain research and development as well as general and administrative support. There can be no assurance that the services of independent organizations, advisors and consultants will continue to be available to us on a timely basis when needed, or that we can find qualified replacements. In addition, if we are unable to effectively manage our outsourced activities or if the quality or accuracy of the services provided by consultants is compromised for any reason, our clinical trials may be extended, delayed or terminated, and we may not be able to obtain regulatory approval of our product candidates or otherwise

56

advance our business. There can be no assurance that we will be able to manage our existing consultants or find other competent outside contractors and consultants on economically reasonable terms, or at all.

If we are not able to effectively expand our organization by hiring new employees and expanding our groups of consultants and contractors, we may not be able to successfully implement the tasks necessary to further develop and commercialize our product candidates and, accordingly, may not achieve our research, development and commercialization goals, which could have a material adverse effect on our business, results of operations and prospects.

We may form or seek strategic alliances or enter into additional licensing arrangements in the future, and we may not realize the benefits of such alliances or licensing arrangements.

We may form or seek strategic alliances, create joint ventures or collaborations or enter into additional licensing arrangements with third parties that we believe will complement or augment our development and commercialization efforts with respect to our product candidates and any future product candidates that we may develop. Any of these relationships may require us to incur non-recurring and other charges, increase our near and long-term expenditures, issue securities that dilute our existing stockholders or disrupt our management and business. In addition, we face significant competition in seeking appropriate strategic partners and the negotiation process is time-consuming and complex. Moreover, we may not be successful in our efforts to establish a strategic partnership or other alternative arrangements for our product candidates because they may be deemed to be at too early of a stage of development for collaborative effort and third parties may not view our product candidates as having the requisite potential to demonstrate safety and efficacy. Any delays in entering into new strategic partnership agreements related to our product candidates could delay the development and commercialization of our product candidates in certain geographies for certain indications, which would harm our business prospects, financial condition and results of operations.

If we license products or businesses, we may not be able to realize the benefit of such transactions if we are unable to successfully integrate them with our existing operations and company culture. For instance, our License and Collaboration Agreement (the Regeneron Agreement) with Regeneron Pharmaceuticals, Inc. (Regeneron) requires significant research and development commitments that may not result in the development and commercialization of product candidates. We cannot be certain that, following a strategic transaction or license, we will achieve the results, revenue or specific net income that justifies such transaction, which could have a material adverse effect on our business and results of operations.

Risks Related to Business Disruptions

Business disruptions could seriously harm our future revenue and financial condition and increase our costs and expenses.

Our operations, and those of our CMO, CROs and other contractors and consultants, could be subject to earthquakes, power shortages, telecommunications failures, water shortages, floods, hurricanes, typhoons, fires, extreme weather conditions, medical epidemics, such as the COVID-19 pandemic, and other natural or man-made disasters or business interruptions. The occurrence of any of these business disruptions could seriously harm our operations and financial condition and increase our costs and expenses.

Our ability to manufacture our product candidates could be disrupted if our operations or those of our suppliers are affected by a man-made or natural disaster, the severity and frequency of which may be amplified by global climate change, or other business interruptions. We have facilities located in California near major earthquake faults and fire zones. The ultimate impact on us, our significant suppliers and our general infrastructure of being located near major earthquake faults and fire zones and being consolidated in certain geographical areas is unknown, but our operations and financial condition could suffer in the event of a major earthquake, fire or other natural disaster.

A pandemic, epidemic or outbreak of an infectious disease, such as the ongoing COVID-19 pandemic, may materially and adversely affect our business and operations.

Our business, financial position, results of operations or cash flows may be affected by the ongoing global COVID-19 pandemic and the resulting volatility and uncertainty it has caused, and is likely to continue to cause, in the United States and international markets, including as a result of prolonged economic downturn or recession. Since January 2020, the COVID-19 pandemic has spread around the world. The continued spread of COVID-19, despite progress in vaccination efforts, has resulted in significant governmental measures being implemented to control the spread of COVID-19 and its variants, including quarantines, travel restrictions, social distancing and business shutdowns. Such measures have had, and are likely to continue to have, adverse impacts on the United States economy of uncertain severity and duration and may negatively impact our operations and those of third parties on which we rely, including by causing disruptions in the supply of our product candidates and the conduct of current and future clinical trials. In addition, the COVID-19 pandemic has affected and may further affect the operations of the FDA and other health authorities, which could result in delays of reviews and approvals, including with respect to our product candidates. The ongoing COVID-19 pandemic is also likely to directly or indirectly impact the pace of enrollment in our future clinical trials as patients may avoid or may not be able to travel to healthcare facilities and physicians’ offices unless

57

due to a health emergency, and clinical trial sites may be less willing to enroll patients in clinical trials that may compromise a person’s immune system. Such facilities and offices may also be required to focus limited resources on non-clinical trial matters, including treatment of COVID-19 patients, and may not be available, in whole or in part, for clinical trial services related to ADI-001 or our other product candidates. Additionally, while the ultimate economic impact brought by, and the duration of the COVID-19 pandemic is difficult to assess or predict, the impact of the COVID-19 pandemic on the global financial markets may reduce our ability to access capital, which could negatively impact our short-term and long-term liquidity.

The extent to which the ongoing COVID-19 pandemic may continue to impact our business will depend on future developments, which are highly uncertain and cannot be predicted with confidence, such as the duration and severity of the pandemic, including the continued emergence of new variants, developments or perceptions regarding the safety of vaccines, or any additional preventative and protective actions taken to contain the pandemic or treat its impact. We do not yet know the full extent of potential delays or impacts on our business, financing, or clinical trial activities or on healthcare systems or the global economy as a whole. However, any of the foregoing risks, or other unforeseen risks related to the COVID-19 pandemic, could have a material impact on our liquidity, capital resources, operations, and business and those of the third parties on which it relies.

Inadequate funding for the FDA and other government agencies, or disruptions in their staffing levels related to the COVID-19 global pandemic, could hinder their ability to hire and retain key leadership and other personnel, prevent new products and services from being developed or commercialized in a timely manner or otherwise prevent those agencies from performing normal business functions on which the approval of our product candidates rely, which would negatively impact our business.

The ability of the FDA to review and approve new products can be affected by a variety of factors, including government budget and funding levels, adequate staffing, furloughs, ability to hire and retain key personnel and accept the payment of user fees, and statutory, regulatory, and policy changes. Average review times at the agency have fluctuated in recent years as a result. In addition, government funding of other government agencies on which our operations may rely, including those that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable.

Disruptions at the FDA and other agencies may also slow the time necessary for new drugs to be reviewed and/or approved by necessary government agencies, which would adversely affect our business. For example, over the last several years, including beginning on December 22, 2018, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA and other government employees and stop critical activities. Since March 2020 when foreign and domestic inspections of facilities were largely placed on hold, the FDA has been working to resume routine surveillance, bioresearch monitoring and pre-approval inspections on a prioritized basis. Since April 2021, the FDA has conducted limited inspections and employed remote interactive evaluations, using risk management methods, to meet user fee commitments and goal dates. Ongoing travel restrictions and other uncertainties continue to impact oversight operations both domestic and abroad and it is unclear when standard operational levels will resume. The FDA is continuing to complete mission-critical work, prioritize other higher-tiered inspectional needs (e.g., for-cause inspections), and carry out surveillance inspections using risk-based approaches for evaluating public health. Should FDA determine that an inspection is necessary for approval of a marketing application and an inspection cannot be completed during the review cycle due to restrictions on travel, and the FDA does not determine a remote interactive evaluation to be adequate, FDA has stated that it generally intends to issue, depending on the circumstances, a complete response letter or defer action on the application until an inspection can be completed. During the COVID-19 public health emergency, a number of companies announced receipt of complete response letters due to the FDA's inability to complete required inspections for their applications. Regulatory authorities outside the United States may adopt similar restrictions or other policy measures in response to the COVID-19 pandemic and may experience delays in their regulatory activities. If a prolonged government shutdown occurs, it could significantly impact the ability of the FDA to timely review and process our regulatory submissions, which could have a material adverse effect on our business, including our ability to access the public markets and obtain necessary capital in order to properly capitalize and continue our operations.

Risks Related to Healthcare Regulation

Our relationships with customers, physicians including clinical investigators, clinical research organizations and third-party payors are subject, directly or indirectly, to federal and state healthcare fraud and abuse laws, false claims laws, health information privacy and security laws, transparency laws, government price reporting and other healthcare laws and regulations. If we or our employees, independent contractors, consultants, commercial partners, vendors, or other agents violate these laws, we could face substantial penalties.

These laws may impact, among other things, our clinical research program, as well as our proposed and future sales, marketing, and education programs. In particular, the promotion, sales and marketing of healthcare items and services is subject to extensive laws and regulations designed to prevent fraud, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive and other business arrangements. We may also be subject to federal, state and foreign laws governing the privacy and

58

security of identifiable patient information. See the section entitled “Business – Government Regulation and Product Approval - Other United States Healthcare Laws and Compliance Requirements” elsewhere in this Annual Report on Form 10-K.

Because of the breadth of these laws and the narrowness of the statutory exceptions and regulatory safe harbors available, it is possible that some of our business activities, or our arrangements with physicians, could be subject to challenge under one or more of such laws. If we or our employees, independent contractors, consultants, commercial partners and vendors violate these laws, we may be subject to investigations, enforcement actions and/or significant penalties.

We have adopted a code of business conduct and ethics, but it is not always possible to identify and deter employee misconduct or business noncompliance, and the precautions we take to detect and prevent inappropriate conduct may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. Efforts to ensure that our business arrangements will comply with applicable healthcare laws may involve substantial costs. It is possible that governmental and enforcement authorities will conclude that our business practices may not comply with current or future statutes, regulations or case law interpreting applicable fraud and abuse or other healthcare laws and regulations. If any such actions are instituted against us, and we are not successful in defending themselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of civil, criminal and administrative penalties, damages, disgorgement, monetary fines, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, contractual damages, reputational harm, diminished profits and future earnings, additional reporting requirements and/or oversight if we become subject to a corporate integrity agreement or similar agreement to resolve allegations of non-compliance with these laws, and curtailment of our operations, any of which could adversely affect our ability to operate our business and our results of operations. In addition, the approval and commercialization of any of our product candidates outside the United States will also likely subject us to foreign equivalents of the healthcare laws mentioned above, among other foreign laws.

Data protection, privacy and similar laws restrict access, use, and disclosure of information, and failure to comply with or adapt to changes in these laws could materially and adversely harm our business.

We are subject to federal and state data privacy and security laws and regulations and Laws and expectations relating to privacy continue to evolve. Changes in these laws may limit our data access, use, and disclosure, and may require increased expenditures. In addition, data protection, privacy and similar laws protect more than patient information and, although they vary by jurisdiction, these laws can extend to employee information, business contact information, provider information, and other information relating to identifiable individuals. For example, the California Consumer Privacy Act requires covered businesses to, among other things, provide disclosures to California consumers regarding the collection, use and disclosure of such consumers’ personal information and afford such consumers new rights with respect to their personal information, including the right to opt out of certain sales of personal information. In addition, the CPRA as well as comprehensive privacy laws in Colorado and Virginia will become effective in 2023. Further, numerous other states have proposed similar privacy laws. We believe that further increased regulation in additional jurisdictions is likely in the area of data privacy. Any of the foregoing may have a material adverse effect on our ability to provide services to patients and, in turn, our results of operations

The collection and use of personal data in the European Union (EU) are governed by the GDPR. The GDPR imposes stringent requirements for controllers and processors of personal data, including, for example, more robust disclosures to individuals and a strengthened individual data rights regime, shortened timelines for data breach notifications, limitations on retention of information, increased requirements pertaining to special categories of data, such as health data, and additional obligations when we contract with third-party processors in connection with the processing of the personal data. The GDPR also imposes strict rules on the transfer of personal data out of the European Union to the United States and other third countries. In addition, the GDPR provides that EU member states may make their own further laws and regulations limiting the processing of personal data, including genetic, biometric or health data.

The GDPR applies extraterritorially, and we may be subject to the GDPR because of our data processing activities that involve the personal data of individuals located in the European Union, such as in connection with our EU clinical trials. Failure to comply with the requirements of the GDPR and the applicable national data protection laws of the EU member states may result in fines of up to €20,000,000 or up to 4% of the total worldwide annual turnover of the preceding financial year, whichever is higher, and other administrative penalties. GDPR regulations may impose additional responsibility and liability in relation to the personal data that our processes and we may be required to put in place additional mechanisms to ensure compliance with the new data protection rules. This may be onerous and may interrupt or delay our development activities, and adversely affect our business, financial condition, results of operations and prospects.

In addition, many jurisdictions outside of Europe are also considering and/or enacting comprehensive data protection legislation. We also continue to see jurisdictions imposing data localization laws. These regulations may interfere with our intended business activities, inhibit our ability to expand into those markets or prohibit us from continuing to offer services in those markets without significant additional costs. Because the interpretation and application of many privacy and data protection laws (including the GDPR), commercial frameworks, and standards are uncertain, it is possible that these laws, frameworks, and

59

standards may be interpreted and applied in a manner that is inconsistent with our existing data management practices and policies. If so, in addition to the possibility of fines, lawsuits, breach of contract claims, and other claims and penalties, we could be required to fundamentally change our business activities and practices or modify our solutions, which could have an adverse effect on our business. Any inability to adequately address privacy and security concerns, even if unfounded, or comply with applicable privacy and security or data security laws, regulations, and policies, could result in additional cost and liability to us, damage our reputation, inhibit our ability to conduct trials, and adversely affect our business

Data protection, privacy and similar laws protect more than patient information and, although they vary by jurisdiction, these laws can extend to employee information, business contact information, provider information, and other information relating to identifiable individuals. Failure to comply with these laws may result in, among other things, civil and criminal liability, negative publicity, damage to our reputation, and liability under contractual provisions. In addition, compliance with such laws may require increased costs to us or may dictate that wet not offer certain types of services in the future.

Risks Related to Litigation

If product liability lawsuits are brought against us, we may incur substantial liabilities and may be required to limit commercialization of our product candidates.

We face an inherent risk of product liability as a result of the future clinical testing of our product candidates and will face an even greater risk if we commercialize any products. For example, we may be sued if our product candidates cause or are perceived to cause injury or are found to be otherwise unsuitable during clinical testing, manufacturing, marketing or sale. Any such product liability claims may include allegations of defects in manufacturing, defects in design, a failure to warn of dangers inherent in the product, negligence, strict liability or a breach of warranties. Claims could also be asserted under state consumer protection acts. If we cannot successfully defend themselves against product liability claims, we may incur substantial liabilities or be required to limit commercialization of our product candidates. Even successful defense would require significant financial and management resources. Regardless of the merits or eventual outcome, liability claims may result in:

decreased demand for our product candidates;

injury to our reputation;

withdrawal of clinical trial participants;

initiation of investigations by regulators;

costs to defend the related litigation;

a diversion of management’s time and our resources;

substantial monetary awards to trial participants or patients;

product recalls, withdrawals or labeling, marketing or promotional restrictions;

loss of revenue;

exhaustion of any available insurance and our capital resources; and

the inability to commercialize any product candidate.

Our inability to obtain sufficient product liability insurance at an acceptable cost to protect against potential product liability claims could prevent or inhibit the commercialization of products we develop, alone or with corporate collaborators. Our insurance policies may also have various exclusions, and we may be subject to a product liability claim for which we have no coverage. Assuming we obtain clinical trial insurance for our clinical trials, we may have to pay amounts awarded by a court or negotiated in a settlement that exceeds our coverage limitations or that are not covered by our insurance, and we may not have, or be able to obtain, sufficient capital to pay such amounts. Even if our agreements with any future corporate collaborators entitle it to indemnification against losses, such indemnification may not be available or adequate should any claim arise.

60

Risks Related to Our Financial Position

Raising funds through lending arrangements may restrict our operations or produce other adverse results.

Our current Loan and Security Agreement with Pacific Western Bank, as amended on October 21, 2021 (the Loan Agreement), sets the interest rate of the term loans under the Loan Agreement at the greater of (i) 0.25% above the Prime Rate then in effect and (ii) 4.25%. The Loan Agreement contains a variety of affirmative and negative covenants, including required financial reporting, limitations on certain dispositions of assets, limitations on the incurrence of additional debt and other requirements. To secure our performance of our obligations under this Loan Agreement, we granted a security interest in substantially all of our assets, other than certain intellectual property assets, to Pacific Western Bank and issued a warrant to purchase our capital stock. Our failure to comply with the covenants in the Loan Agreement, the occurrence of a material impairment in our prospect of repayment operations, business or financial condition, our ability to repay the loan, or in the value, perfection or priority of Pacific Western Bank’s lien on our assets, as determined by Pacific Western Bank, or the occurrence of certain other specified events could result in an event of default that, if not cured or waived, could result in the acceleration of all or a substantial portion of our debt, potential foreclosure on our assets and other adverse results. Additionally, we are bound by certain negative covenants setting forth actions that are not permitted to be taken during the term of the Loan Agreement without consent of Pacific Western Bank, including, without limitation, incurring certain additional indebtedness, making certain asset dispositions, entering into certain mergers, acquisitions or other business combination transactions or incurring any non-permitted lien or other encumbrance on our assets. The foregoing prohibitions and constraints on our operations could result in our inability to: (a) acquire promising intellectual property or other assets on desired timelines or terms; (b) reduce costs by disposing of assets or business segments no longer deemed advantageous to retain; (c) stimulate further corporate growth or development through the assumption of additional debt; or (d) enter into other arrangements that necessitate the imposition of a lien on corporate assets. Moreover, if the conditions set forth in the consent provided by Pacific Western Bank are not satisfied, we would effectively need to terminate the Loan Agreement and repay any outstanding loan funds or refinance the facility with another lender. As of the date of this Annual Report on Form 10-K, no amounts have been drawn under the Loan Agreement.

Failure to achieve and maintain effective internal control over financial reporting could harm our business and negatively impact the value of our common stock.

Effective internal control over financial reporting is necessary for us to provide reliable financial reports and, together with adequate disclosure controls and procedures, are designed to prevent fraud. Any failure to implement required new or improved controls, or difficulties encountered in their implementation could cause us to fail to meet our reporting obligations. In addition, any testing by us conducted in connection with Section 404, or any subsequent testing by our independent registered public accounting firm, may reveal deficiencies in our internal control over financial reporting that are deemed to be material weaknesses or that may require prospective or retroactive changes to our financial statements, or may identify other areas for further attention or improvement. Inferior internal controls could also cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our stock.

We are required to disclose changes made in our internal controls and procedures on a quarterly basis and our management is required to assess the effectiveness of these controls annually. However, for as long as we are an emerging growth company (EGC) or a smaller reporting company (SRC), our independent registered public accounting firm will not be required to attest to the effectiveness of our internal control over financial reporting pursuant to Section 404. We will remain an EGC until the earliest to occur of: (1) the last day of the fiscal year in which we have more than $1.07 billion in annual revenue; (2) the date we qualify as a large accelerated filer, with at least $700.0 million of equity securities held by non-affiliates; (3) the date on which we have issued more than $1.0 billion in non-convertible debt securities during the prior three-year period; or (4) the last day of the fiscal year ending after the fifth anniversary of our initial public offering, which would be December 31, 2023.

We will qualify as a SRC if the market value of our common stock held by non-affiliates is below $250 million (or $700 million if our annual revenue is less than $100 million) as of June 30 in any given year. An independent assessment of the effectiveness of our internal control over financial reporting could detect problems that our management’s assessment might not. Undetected material weaknesses in our internal control over financial reporting could lead to financial statement restatements and require us to incur the expense of remediation.

We and our independent registered public accounting firm previously identified material weaknesses in our internal control over financial reporting, which have since been remediated. Nevertheless, if we experience additional material weaknesses or deficiencies in the future or otherwise fail to establish and maintain effective internal controls, we may be unable to produce timely and accurate financial statements, and we may conclude that our internal control over financial reporting is not effective, which could adversely impact our investors’ confidence and our stock price.

In our Annual Report on Form 10-K for the year ended December 31, 2020, we reported material weaknesses in our internal control over financial reporting related to deficiencies in our controls over the financial statement close process, including over complex accounting issues, expense classification and accrued research and development expenses, as well as the cash disbursement process. During 2021, we took a number of actions to improve our internal control over financial reporting to remediate these material weaknesses, including the hiring key personnel, implementing an Enterprise Resource Planning (ERP) system, and augmenting our controls to enhance our control environment. As a result of these efforts, management has concluded

61

that the previously disclosed material weaknesses have been remediated as of December 31, 2021.

We expect to continue our efforts to improve our control processes, though there can be no assurance that our efforts will ultimately be successful or avoid potential future material weaknesses, and we expect to continue incurring additional costs as a result of these efforts. If we are unable to successfully remediate any future material weaknesses in our internal control over financial reporting, or if we identify any additional material weaknesses, the accuracy and timing of our financial reporting may be adversely affected, we may be unable to maintain compliance with securities law requirements regarding timely filing of periodic reports in addition to applicable stock exchange listing requirements, investors may lose confidence in our financial reporting, and our stock price may decline as a result. We also could become subject to investigations by Nasdaq, the SEC or other regulatory authorities, which could harm our reputation and our financial condition, or divert financial and management resources from our core business.

Risks Related to Taxation

Our ability to utilize our net operating loss carryforwards and certain other tax attributes may be limited.

Under Section 382 and Section 383 of the Internal Revenue Code of 1986, as amended, or the IRC, if a corporation undergoes an “ownership change” (generally defined as a greater than 50 percentage point change (by value) in the ownership of its equity over a three year period), the corporation’s ability to use its pre-change net operating loss carryforwards and certain other pre-change tax attributes to offset its post-change income may be limited. We may have experienced such ownership changes in the past, and we may experience ownership changes in the future as a result of subsequent shifts in our stock ownership. As of December 31, 2021, we had federal net operating loss carryforwards of approximately $271.6 million, and our ability to utilize those net operating loss carryforwards could be limited by an “ownership change” as described above.

Comprehensive tax reform legislation could adversely affect our business and financial condition.

The rules dealing with U.S. federal, state and local income taxation are constantly under review by persons involved in the legislative process and by the Internal Revenue Service, or IRS, and the U.S. Treasury Department. Changes to tax laws (which changes may have retroactive application) could adversely affect us or holders of our common stock. In recent years, many changes have been made and changes are likely to continue to occur in the future.

Additional changes to U.S. federal income tax law are currently being contemplated, and future changes in tax laws could have a material adverse effect on our business, cash flow, financial condition or results of operations. It cannot be predicted whether, when, in what form, or with what effective dates, new tax laws may be enacted, or regulations and rulings may be enacted, promulgated or issued under existing or new tax laws, which could result in an increase in our or our stockholders’ tax liability or require changes in the manner in which we operate in order to minimize or mitigate any adverse effects of changes in tax law or in the interpretation thereof. You are urged to consult your tax advisor regarding the implications of potential changes in tax laws on an investment in our common stock.

Risks Related to Third Parties

If our collaboration with Regeneron is terminated, or if Regeneron materially breaches its obligations thereunder, our business, prospects, operating results, and financial condition would be materially harmed.

Our financial performance may be significantly affected by our Regeneron collaboration that we have entered into to develop next-generation engineered immune-cell therapeutics with fully human CARs and TCRs directed to disease-specific cell surface antigens in order to enable the precise engagement and killing of tumor cells. Under the Regeneron Agreement, Regeneron paid us a non-refundable upfront payment of $25.0 million and an aggregate of $20.0 million of additional payments for research funding as of December 31, 2021, and we will collaborate with Regeneron to identify and validate targets and develop a pipeline of engineered immune-cell therapeutics for selected targets. Regeneron has the option to obtain development and commercial rights for a certain number of the product candidates developed by the parties, subject to an option payment for each product candidate. On January 28, 2022, we received a payment of $20.0 million from Regeneron for exercise of its option to license exclusive rights to ADI-002. If Regeneron exercises its option on a given product candidate, we then have an option to participate in the development and commercialization for such product. If we do not exercise our option, we will be entitled to royalties on any future sales of such products by Regeneron. We did not exercise our option to participate in the development and commercialization of ADI-002. In addition to developing CARs and TCRs for use in novel immune-cell therapies as part of the collaboration, Regeneron will have the right to use these CARs and TCRs in our other antibody programs outside of the collaboration. Regeneron will also be entitled to royalties on any future sales of products developed and commercialized by us under the agreement. If Regeneron were to terminate our collaboration agreement with us, we may not have the resources or skills to replace those of our collaborator, which could require us to seek additional funding or another collaboration that might not be available on favorable terms or at all, and could cause significant delays in development and/or commercialization efforts and result in substantial additional costs to us. Termination of such collaboration agreement or the loss of rights provided to us under such agreement may create substantial new and additional risks to the successful development and commercialization of our products and could materially harm our financial condition and operating results.

62

Regeneron may change its strategic focus or pursue alternative technologies in a manner that results in reduced, delayed or no revenue to us under the agreement. Regeneron has a variety of marketed products and product candidates either by itself or under collaboration with other companies, including some of our competitors, and the corporate objectives of Regeneron may not be consistent with our best interests. Regeneron may change its position regarding its participation and funding of our and Regeneron joint activities, which may impact our ability to successfully pursue the program.

Our existing and future collaborations will be important to our business. If we are unable to maintain any of these collaborations, or if these collaborations are not successful, our business could be adversely affected.

We have entered, and plan to enter, into collaborations with other companies, including our collaboration agreement with Regeneron, that we believe can provide us with additional capabilities beneficial to our business. The collaboration with Regeneron provides us with important technologies, expertise and funding for our programs and technology, and we expect to receive additional technologies, expertise and funding under this and other collaborations in the future. Our existing therapeutic collaborations, and any future collaborations we enter into, may pose a number of risks, including the following:

collaborators have significant discretion in determining the efforts and resources that they will apply;

collaborators may not perform their obligations as expected;

collaborators may dispute the amounts of payments owed;

collaborators may not pursue development and commercialization of any product candidates that achieve regulatory approval or may elect not to continue or renew development or commercialization programs or license arrangements based on clinical trial results, changes in the collaborators’ strategic focus or available funding, or external factors, such as a strategic transaction that may divert resources or create competing priorities;

collaborators may delay clinical trials, provide insufficient funding for a clinical trial program, stop a clinical trial or abandon a product candidate, repeat or conduct new clinical trials or require a new formulation of a product candidate for clinical testing;

collaborators could develop independently, or with third parties, products that compete directly or indirectly with our products and product candidates if the collaborators believe that the competitive products are more likely to be successfully developed or can be commercialized under terms that are more economically attractive than ours;

product candidates discovered in collaboration with us may be viewed by our collaborators as competitive with our own product candidates or products, which may cause collaborators to cease to devote resources to the development or commercialization of our product candidates;

collaborators may dispute ownership or rights in jointly developed technologies or intellectual property;

collaborators may fail to comply with applicable legal and regulatory requirements regarding the development, manufacture, sale, distribution or marketing of a product candidate or product;

collaborators with sales, marketing, manufacturing and distribution rights to one or more of our product candidates that achieve regulatory approval may not commit sufficient resources to the sale, marketing, manufacturing and distribution of such product or products;

disagreements with collaborators, including disagreements over proprietary rights, contract interpretation, payment obligations or the preferred course of discovery, development, sales or marketing, might cause delays or terminations of the research, development or commercialization of product candidates, might lead to additional and burdensome responsibilities for us with respect to product candidates, or might result in litigation or arbitration, any of which would be time-consuming and expensive;

collaborators may not properly maintain or defend their or our relevant intellectual property rights or may use our proprietary information in such a way as to invite litigation that could jeopardize or invalidate our intellectual property or proprietary information or expose us to potential litigation and liability;

collaborators may infringe the intellectual property rights of third parties, which may expose us to litigation and potential liability;

if a collaborator of ours is involved in a business combination or cessation, the collaborator might deemphasize or terminate the development or commercialization of any product candidate licensed to it by us; and

63

collaborations may be terminated by the collaborator, and, if terminated, we could be required to raise additional capital to pursue further development or commercialization of the applicable product candidates, or potentially lose access to the collaborator’s intellectual property.

If our therapeutic collaborations do not result in the successful discovery, development and commercialization of products or if one of our collaborators terminates our agreement with us, we may not receive any future research funding or milestone or royalty payments under the collaboration. If we do not receive the funding we expect under these agreements, our development and commercialization of our technology and product candidates could be delayed and we may need additional resources to develop product candidates and our technology. All of the risks relating to product discovery, development, regulatory approval and commercialization described in these risk factors also apply to the activities of our therapeutic collaborators.

In addition to the Regeneron collaboration described above, for some of our programs, we may in the future determine to collaborate with pharmaceutical and biotechnology companies for discovery, development and potential commercialization of therapeutic products. We face significant competition in seeking appropriate collaborators because, for example, third parties also have rights to allogeneic T cell technologies. For example, in April 2020, Johnson & Johnson entered into a collaboration agreement with Fate Therapeutics, a company that is also using allogeneic T cell technologies, for up to four CAR Natural Killer (NK) and CAR-T cell therapies. Our ability to reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed collaborator’s evaluation of a number of factors. If we are unable to reach agreements with suitable collaborators on a timely basis, on acceptable terms, or at all, we may have to curtail discovery efforts or the development of a product candidate, reduce or delay our development program or one or more of our other development programs, delay our potential manufacture or commercialization, or reduce the scope of any sales or marketing activities, or increase our expenditures and undertake development or commercialization activities at our expense. If we elect to fund and undertake discovery, development, manufacturing or commercialization activities on our own, we may need to obtain additional expertise and additional capital, which may not be available to us on acceptable terms or at all. If we fail to enter into collaborations and do not have sufficient funds or expertise to undertake the necessary discovery, development, manufacturing and commercialization activities, we may not be able to further develop our product candidates, manufacture the product candidates, bring them to market or continue to develop our technology and our business may be materially and adversely affected.

We are subject to certain exclusivity obligations under our agreement with Regeneron.

During the five-year period following the effective date of the Regeneron agreement, with certain limited exceptions, we may not directly or indirectly research, develop, manufacture or commercialize a gamma delta immune cell product (ICP) or grant a license to do the foregoing, except pursuant to the terms of the Regeneron agreement. Both parties also have obligations not to research, develop, manufacture or commercialize an ICP with the same target as one being developed under a research program or commercialized by a party (and royalty bearing under the agreement), for so long as such activities are occurring. These exclusivity obligations are limited to engineered gamma delta immune cells to targets reasonably considered to have therapeutic relevance in oncology. If our collaboration with Regeneron is not successful, including any failure caused by the risks listed in the preceding paragraphs, and the agreement and research programs are not terminated, we may not be able to enter into collaborations with other companies with respect to ICP’s and our business could be adversely affected.

The exclusivity obligations under the Regeneron agreement expired on July 29, 2021. Prior to this expiration date, our ability to advance any gamma delta immune cell therapeutics outside of the scope of the research plan agreed on with Regeneron was limited. The restrictions on internal development under the Regeneron agreement could lead to delays in our ability to discover and develop gamma delta immune cell therapeutics for targets not covered by the collaboration with Regeneron and loss of opportunities to obtain additional research funding and advance our own technologies separately from the Regeneron collaboration. If we are delayed in our ability to advance our technologies due to the Regeneron agreement, our business could be harmed.

We rely and will continue to rely on third parties to conduct our clinical trials. If these third parties do not successfully carry out their contractual duties or meet expected deadlines, we may not be able to obtain regulatory approval of or commercialize our product candidates.

We currently depend and will continue to depend upon independent investigators and collaborators, such as universities, medical institutions, CROs and strategic partners to conduct our preclinical and clinical trials under agreements with us.

We negotiate budgets and contracts with CROs and study sites, which may result in delays to our development timelines and increased costs. We will rely heavily on these third parties over the course of our clinical trials, and we control only certain aspects of their activities. Nevertheless, we are responsible for ensuring that each of our studies is conducted in accordance with applicable protocol, legal, regulatory and scientific standards, and our reliance on third parties does not relieve us of our regulatory responsibilities. We and these third parties are required to comply with GCPs, which are regulations and guidelines enforced by the FDA and comparable foreign regulatory authorities for product candidates in clinical development. Regulatory authorities enforce these GCPs through periodic inspections of trial sponsors, principal investigators and trial sites. If we or any of these third parties fail to comply with applicable GCP regulations, the clinical data generated in our clinical trials may be

64

deemed unreliable and the FDA or comparable foreign regulatory authorities may require us to perform additional clinical trials before approving our marketing applications. We cannot assure you that, upon inspection, such regulatory authorities will determine that any of our clinical trials comply with the GCP regulations. In addition, our clinical trials must be conducted with biologic product produced under cGMPs and will require a large number of test patients. Our failure or any failure by these third parties to comply with these regulations or to recruit a sufficient number of patients may require us to repeat clinical trials, which would delay the regulatory approval process. Moreover, our business may be implicated if any of these third parties violates federal or state fraud and abuse or false claims laws and regulations or healthcare privacy and security laws.

Any third parties conducting our clinical trials are and will not be our employees and, except for remedies available to us under our agreements with such third parties, we cannot control whether or not they devote sufficient time and resources to our ongoing preclinical, clinical and nonclinical programs. These third parties may also have relationships with other commercial entities, including our competitors, for whom they may also be conducting clinical studies or other drug development activities, which could affect their performance on our behalf. If these third parties do not successfully carry out their contractual duties or obligations or meet expected deadlines, if they need to be replaced or if the quality or accuracy of the clinical data they obtain is compromised due to the failure to adhere to our clinical protocols or regulatory requirements or for other reasons, our clinical trials may be extended, delayed or terminated and we may not be able to complete development of, obtain regulatory approval of or successfully commercialize our product candidates. As a result, our financial results and the commercial prospects for our product candidates would be harmed, our costs could increase and our ability to generate revenue could be delayed.

If any of our relationships with trial sites, or any CRO that we may use in the future, terminates, we may not be able to enter into arrangements with alternative trial sites or CROs or do so on commercially reasonable terms. Switching or adding third parties to conduct our clinical trials will involve substantial cost and require extensive management time and focus. In addition, there is a natural transition period when a new third party commences work. As a result, delays occur, which can materially impact our ability to meet our desired clinical development timelines.

We currently rely on third parties to manufacture our clinical product supplies, and we may have to rely on third parties to produce and process our product candidates, if approved.

We currently utilize, and expect to continue to utilize, third parties to manufacture our product candidates. If the field of cell therapy continues to expand, we may encounter increasing competition and costs for these materials and services. Demand for third-party manufacturing in cell therapy may grow at a faster rate than existing capacity, which could disrupt our ability to find and retain third-party manufacturers capable of producing sufficient quantities of our product candidates at an acceptable cost or at all. We have also not yet caused our product candidates to be manufactured or processed on a commercial scale and may not be able to achieve manufacturing and processing at a commercial scale and therefore may be unable to create an inventory of mass-produced, off-the-shelf product to satisfy demands for any of our product candidates.

We do not yet have sufficient information to reliably estimate the cost of the commercial manufacturing and processing of our product candidates, and the actual cost to manufacture and process our product candidates could materially and adversely affect the commercial viability of our product candidates. As a result, we may never be able to develop a commercially viable product.

In addition, we anticipate reliance on a limited number of third-party manufacturers may adversely affect our operations and exposes us to the following risks:

We may be unable to identify manufacturers on acceptable terms or at all because the number of potential manufacturers is limited and the FDA may have questions regarding any replacement contractor. This may require new testing and regulatory interactions. In addition, a new manufacturer would have to be educated in, or develop substantially equivalent processes for, production of our products after receipt of FDA questions, if any.

Our third-party manufacturers might be unable to timely formulate and manufacture our product or produce the quantity and quality required to meet our clinical and commercial needs, if any.

Contract manufacturers may not be able to execute our manufacturing procedures appropriately.

Our future contract manufacturers may not perform as agreed or may not remain in the contract manufacturing business for the time required to supply our clinical trials or to successfully produce, store and distribute our products.

Manufacturers are subject to ongoing periodic unannounced inspection by the FDA, the Drug Enforcement Administration and corresponding state agencies to ensure strict compliance with cGMP and other government regulations and corresponding foreign standards. We do not have control over third-party manufacturers’ compliance with these regulations and standards.

65

We may not own, or may have to share, the intellectual property rights to any improvements made by our third-party manufacturers in the manufacturing process for our products.

Our third-party manufacturers could breach or terminate their agreement(s) with us.

If any CMO with whom we contract fails to perform its obligations, we may be forced to manufacture the materials ourselves, for which we may not have the capabilities or resources, or enter into an agreement with a different CMO, which we may not be able to do on reasonable terms, if at all. In either scenario, our clinical trials supply could be delayed significantly as we establish alternative supply sources. In some cases, the technical skills required to manufacture our product candidates may be unique or proprietary to the original CMO and we may have difficulty, or there may be contractual restrictions prohibiting us from, transferring such skills to a back-up or alternate supplier, or we may be unable to transfer such skills at all. In addition, if we are required to change CMOs for any reason, we will be required to verify that the new CMO maintains facilities and procedures that comply with quality standards and with all applicable regulations. We will also need to verify, such as through a manufacturing comparability study, that any new manufacturing process will produce our product candidates according to the specifications previously submitted to the FDA or another regulatory authority. The delays associated with the verification of a new CMO could negatively affect our ability to develop product candidates or commercialize our products in a timely manner or within budget. Furthermore, a CMO may possess technology related to the manufacture of our product candidates that such CMO owns independently. This would increase our reliance on such CMO or require us to obtain a license from such CMO in order to have another CMO manufacture our product candidates. In addition, changes in manufacturers often involve changes in manufacturing procedures and processes, which could require that we conduct bridging studies between our prior clinical supply used in our clinical trials and that of any new manufacturer. We may be unsuccessful in demonstrating the comparability of clinical supplies which could require the conduct of additional clinical trials.

Our contract manufacturers would also be subject to the same risks we face in developing our own manufacturing capabilities, as described above. Each of these risks could delay our clinical trials, the approval, if any, of our product candidates by the FDA or the commercialization of our product candidates or result in higher costs or deprive us of potential product revenue. In addition, we will rely on third parties to perform release tests on our product candidates prior to delivery to patients. If these tests are not appropriately done and test data are not reliable, patients could be put at risk of serious harm.

Cell-based therapies rely on the availability of specialty raw materials, which may not be available to us on acceptable terms or at all.

Our product candidates require many specialty raw materials, including viral vectors that deliver the targeting moiety and other genes to the product candidate. We currently manufacture through contract manufacturers, some of which have limited resources and experience supporting a commercial product, and such suppliers may not be able to deliver raw materials to our specifications. Those suppliers normally support blood-based hospital businesses and generally do not have the capacity to support commercial products manufactured under cGMP by biopharmaceutical firms. The suppliers may be ill-equipped to support our needs, especially in non-routine circumstances like an FDA inspection or medical crisis, such as widespread contamination. We also do not have contracts with many of these suppliers, and we may not be able to contract with them on acceptable terms or at all. Accordingly, we may experience delays in receiving key raw materials to support clinical or commercial manufacturing. Additionally, since the beginning of the COVID-19 pandemic, three vaccines for COVID-19 have received Emergency Use Authorization by the FDA, and one of those later received marketing approval. Additional vaccines may be authorized or approved in the future. The resultant demand for vaccines and potential for manufacturing facilities and materials to be commandeered under the Defense Production Act of 1950, or equivalent foreign legislation, may make it more difficult to obtain materials or manufacturing slots for the materials needed for our clinical trials, which could lead to delays in these trials.

In addition, some raw materials utilized in the manufacture of our candidates are currently available from a single supplier, or a small number of suppliers. We cannot be sure that these suppliers will remain in business or that they will not be purchased by one of our competitors or another company that is not interested in continuing to produce these materials for our intended purpose. Further, the lead time needed to establish a relationship with a new supplier can be lengthy, and we may experience delays in meeting demand in the event we must switch to a new supplier. The time and effort to qualify a new supplier could result in additional costs, diversion of resources or reduced manufacturing yields, any of which would negatively impact our operating results. We may be unable to enter into agreements with a new supplier on commercially reasonable terms, which could have a material adverse impact on our business.

If we or our third-party suppliers use hazardous, non-hazardous, biological or other materials in a manner that causes injury or violates applicable law, we may be liable for damages.

Our research and development activities involve the controlled use of potentially hazardous substances, including chemical and biological materials. We and our suppliers are subject to federal, state and local laws and regulations in the United States governing the use, manufacture, storage, handling and disposal of medical and hazardous materials. Although we believe that our and our suppliers’ procedures for using, handling, storing and disposing of these materials comply with legally prescribed standards, we and our suppliers cannot completely eliminate the risk of contamination or injury resulting from medical or

66

hazardous materials. As a result of any such contamination or injury, we may incur liability or local, city, state or federal authorities may curtail the use of these materials and interrupt our business operations. In the event of an accident, we could be held liable for damages or penalized with fines, and the liability could exceed our resources. Compliance with applicable environmental laws and regulations is expensive, and current or future environmental regulations may impair our research, development and production efforts, which could harm our business, prospects, financial condition or results of operations.

Our internal computer systems, or those used by our CROs or other contractors or consultants, may fail or suffer security breaches.

Our internal computer systems and the systems of our CROs, contractors and consultants are vulnerable to damage from computer viruses and unauthorized access. Additionally, as a result of the ongoing COVID-19 pandemic, we have transitioned certain of our workforce to a remote working model. As our employees and our business partners’ employees work from home and access our systems remotely, we may be subject to heightened security and privacy risks, including the risks of cyberattacks and privacy incidents. While we have not experienced any such material system failure or security breach to date, if such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our development programs and our business operations. For example, the loss of clinical trial data from future clinical trials could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the data. To the extent that any disruption or security breach were to result in a loss of, or damage to, our data or applications, or inappropriate disclosure of confidential or proprietary information, we could incur liability and the further development and commercialization of our product candidates could be delayed.

We may not realize the benefits of acquired assets or other strategic transactions.

We actively evaluate various strategic transactions on an ongoing basis. We may acquire other businesses, products or technologies as well as pursue joint ventures or investments in complementary businesses. The success of our strategic transactions, and any future strategic transactions depends on the risks and uncertainties involved including:

unanticipated liabilities related to acquired companies or joint ventures;

difficulties integrating acquired personnel, technologies, and operations into our existing business;

retention of key employees;

diversion of management time and focus from operating our business to management of strategic alliances or joint ventures or acquisition integration challenges;

increases in our expenses and reductions in our cash available for operations and other uses;

disruption in our relationships with collaborators or suppliers as a result of such a transaction; and possible write-offs or impairment charges relating to acquired businesses or joint ventures.

If any of these risks or uncertainties occur, we may not realize the anticipated benefit of any acquisition or strategic transaction. Additionally, foreign acquisitions and joint ventures are subject to additional risks, including those related to integration of operations across different cultures and languages, currency risks, potentially adverse tax consequences of overseas operations and the particular economic, political and regulatory risks associated with specific countries.

Future acquisitions or dispositions could result in potentially dilutive issuances of our equity securities, the incurrence of debt, contingent liabilities or amortization expenses or write-offs of goodwill, any of which could have a material adverse effect on our financial condition.

Risks Related to Government Regulation

Risks Related to Regulatory Approval

The FDA regulatory approval process is lengthy and time-consuming, and we may experience significant delays in the clinical development and regulatory approval of our product candidates.

The research, testing, manufacturing, labeling, approval, selling, import, export, marketing, and distribution of drug products, including biologics, are subject to extensive regulation by the FDA and other regulatory authorities in the United States. We are not permitted to market any biological drug product in the United States until we receive approval of a biologics license application (BLA) from the FDA. We have not previously submitted a BLA to the FDA, or similar approval filings to comparable

67

foreign authorities. A BLA must include extensive preclinical and clinical data and sufficient supporting information to establish the product candidate’s safety and effectiveness for each desired indication. The BLA must also include significant information regarding the chemistry, manufacturing and controls for the product.

We expect the novel nature of our product candidates to create further challenges in obtaining regulatory approval. For example, the FDA has limited experience with commercial development of allogeneic T cell therapies for cancer. We may also request regulatory approval of future product candidates by target, regardless of cancer type or origin, which the FDA may have difficulty accepting if our clinical trials only involved cancers of certain origins. The FDA may also require a panel of experts, referred to as an Advisory Committee, to deliberate on the adequacy of the safety and efficacy data to support licensure. The opinion of the Advisory Committee, although not binding, may have a significant impact on our ability to obtain licensure of the product candidates based on the completed clinical trials, as the FDA often adheres to the Advisory Committee’s recommendations. Accordingly, the regulatory approval pathway for our product candidates may be uncertain, complex, expensive and lengthy, and approval may not be obtained.

We may also experience delays in obtaining regulatory approvals, including but not limited to:

obtaining regulatory authorization to begin a trial, if applicable;

redesigning our study protocols and need to conduct additional studies as may be required by a regulator;

governmental or regulatory delays and changes in regulation or policy relating to the development and commercialization of our product candidate by the FDA or other comparable foreign regulatory authorities;

the outcome, timing and cost of meeting regulatory requirements established by the FDA, and other comparable foreign regulatory authorities;

the availability of financial resources to commence and complete the planned trials;

negotiating the terms of any collaboration agreements we may choose to initiate or conclude;

reaching agreement on acceptable terms with prospective CROs and clinical trial sites, the terms of which can be subject to extensive negotiation and may vary significantly among different CROs and trial sites;

failure of third-party contractors, such as CROs, or investigators to comply with regulatory requirements, including GCP standards;

clinical sites deviating from trial protocol or dropping out of a trial;

delay or failure in obtaining the necessary approvals from regulators or institutional review boards, or IRBs, in order to commence a clinical trial at a prospective trial site, or their suspension or termination of a clinical trial once commenced;

Inability to recruit and enroll suitable patients to participate in a trial;

having patients complete a trial, including having patients enrolled in clinical trials dropping out of the trial before the product candidate is manufactured and returned to the site, or return for post-treatment follow-up;

difficulty in having patients complete a trial or return for post-treatment follow-up;

addressing any patient safety concerns that arise during the course of a trial;

inability to add new clinical trial sites;

varying interpretations of the data generated from our preclinical or clinical trials;

the cost of defending intellectual property disputes, including patent infringement actions brought by third parties;

the effect of competing technological and market developments;

68

the cost and timing of establishing, expanding and scaling manufacturing capabilities;

inability to manufacture, or obtain from third parties, sufficient quantities of qualified materials under cGMPs, for the completion in preclinical and clinical studies;

problems with biopharmaceutical product candidate storage, stability and distribution resulting in global supply chain disruptions;

the cost of establishing sales, marketing and distribution capabilities for any product candidate for which we may receive regulatory approval in regions where we choose to commercialize our products on our own; or

potential unforeseen business disruptions or market fluctuations that delay our product development or clinical trials and increase our costs or expenses, such as business or operational disruptions, delays, or system failures due to malware, unauthorized access, terrorism, war, natural disasters, strikes, geopolitical conflicts, restrictions on trade, import or export restrictions, or public health crises, such as the ongoing COVID-19 pandemic.

We could also encounter delays if physicians encounter unresolved ethical issues associated with enrolling patients in clinical trials of our product candidates in lieu of prescribing existing treatments that have established safety and efficacy profiles. Further, a clinical trial may be suspended or terminated by us, the IRBs for the institutions in which such trials are being conducted or by the FDA or other regulatory authorities due to a number of factors, including failure to conduct the clinical trial in accordance with regulatory requirements or our clinical protocols, inspection of the clinical trial operations or trial site by the FDA or other regulatory authorities resulting in the imposition of a clinical hold, safety issues or adverse side effects, failure to demonstrate a benefit from using a product candidate, changes in governmental regulations or administrative actions, lack of adequate funding to continue the clinical trial, or based on a recommendation by the Data Safety Monitoring Committee. If we experience termination of, or delays in the completion of, any clinical trial of our product candidates, the commercial prospects for our product candidates will be harmed, and our ability to generate product revenue will be delayed. In addition, any delays in completing our clinical trials will increase our costs, slow down our product development and approval process and jeopardize our ability to commence product sales and generate revenue.

Many of the factors that cause, or lead to, a delay in the commencement or completion of clinical trials may ultimately lead to the denial of regulatory approval of our product candidates.

We expect the product candidates we develop will be regulated as biological products, or biologics, and therefore they may be subject to competition sooner than anticipated.

The Biologics Price Competition and Innovation Act (BPCIA) was enacted as part of the Affordable Care Act to establish an abbreviated pathway for the approval of biosimilar and interchangeable biological products. The regulatory pathway establishes legal authority for the FDA to review and approve biosimilar biologics, including the possible designation of a biosimilar as “interchangeable” based on its similarity to an approved biologic. Under the BPCIA, an application for a biosimilar product cannot be approved by the FDA until 12 years after the reference product was approved under a BLA. The law is complex and is still being interpreted and implemented by the FDA. As a result, its ultimate impact, implementation, and meaning are subject to uncertainty. While it is uncertain when such processes intended to implement the BPCIA may be fully adopted by the FDA, any such processes could have a material adverse effect on the future commercial prospects for our biological products.

We believe that any of the product candidates we develop that are approved in the United States as a biological product under a BLA should qualify for the 12-year period of exclusivity. However, there is a risk that this exclusivity could be shortened due to congressional action or otherwise, potentially creating the opportunity for generic competition sooner than anticipated. Moreover, the extent to which a biosimilar, once approved, will be substituted for any one of the reference products in a way that is similar to traditional generic substitution for non-biological products is not yet clear, and will depend on a number of marketplace and regulatory factors that are still developing.

The regulatory landscape that will govern our product candidates is uncertain; regulations relating to more established cell therapy products are still developing, and changes in regulatory requirements could result in delays or discontinuation of development of our product candidates or unexpected costs in obtaining regulatory approval.

Government authorities in the United States at the federal, state and local level and in other countries regulate, among other things, the research, development, testing, manufacture, quality control, approval, labeling, packaging, storage, record-keeping, promotion, advertising, distribution, post-approval monitoring and reporting, marketing and export and import of drug and biological products. Generally, before a new drug or biologic can be marketed, considerable data demonstrating its quality, safety and efficacy must be obtained, organized into a format specific for each regulatory authority, submitted for review and approved by the regulatory authority.

69

Because we are developing novel allogeneic cell immunotherapy product candidates, the regulatory requirements that we will be subject to are not entirely clear. Even with respect to more established products that fit into the category of cell therapies, the regulatory landscape is still developing. For example, regulatory requirements governing cell therapy products have changed frequently and may continue to change in the future. Moreover, there is substantial, and sometimes uncoordinated, overlap in those responsible for regulation of existing cell therapy products.

Complex regulatory environments exist in other jurisdictions in which we might consider seeking regulatory approvals for our product candidates, further complicating the regulatory landscape. For example, in the EU a special committee called the Committee for Advanced Therapies (CAT) was established within the EMA in accordance with Regulation (EC) No 1394/2007 on advanced-therapy medicinal products (ATMPs) to assess the quality, safety and efficacy of ATMPs, and to follow scientific developments in the field. ATMPs include somatic cell therapy products and tissue engineered products. These various regulatory review committees and advisory groups and new or revised guidelines that they promulgate from time to time may lengthen the regulatory review process, require us to perform additional studies, increase our development costs, lead to changes in regulatory positions and interpretations, delay or prevent approval and commercialization of our product candidates or lead to significant post-approval limitations or restrictions. Because the regulatory landscape for our gamma delta CAR-T cell product candidates is new, we may face even more cumbersome and complex regulations than those emerging for cell therapy products. Furthermore, even if our product candidates obtain required regulatory approvals, such approvals may later be withdrawn as a result of changes in regulations or the interpretation of regulations by applicable regulatory agencies.

Delay or failure to obtain, or unexpected costs in obtaining, the regulatory approval necessary to bring a potential product to market could decrease our ability to generate sufficient product revenue to maintain our business.

The FDA may disagree with our regulatory plan and we may fail to obtain regulatory approval of our product candidates.

The general approach for FDA approval of a new biologic or drug is for the sponsor to provide dispositive data from two well-controlled, Phase 3 clinical studies of the relevant biologic or drug in the relevant patient population. Phase 3 clinical studies typically involve hundreds of patients, have significant costs and take years to complete. We expect registrational trials for our product candidates to be designed to evaluate the efficacy of the product candidate in an open-label, non-comparative, two-stage, pivotal, multicenter, single-arm clinical trial in patients who have exhausted available treatment options. If the results are sufficiently compelling, we intend to discuss with the FDA submission of a BLA for the relevant product candidate. However, we do not have any agreement or guidance from the FDA that its regulatory development plans will be sufficient for submission of a BLA. In addition, the FDA may only allow us to evaluate patients that have failed or who are ineligible for autologous therapy, which are extremely difficult patients to treat and patients with advanced and aggressive cancer, and our product candidates may fail to improve outcomes for such patients.

The FDA may grant accelerated approval for our product candidates and, as a condition for accelerated approval, the FDA may require a sponsor of a drug or biologic receiving accelerated approval to perform post marketing studies to verify and describe the predicted effect on irreversible morbidity or mortality or other clinical endpoint, and the drug or biologic may be subject to withdrawal procedures by the FDA that are more accelerated than those available for regular approvals. In addition, the standard of care may change with the approval of new products in the same indications that we are studying. This may result in the FDA or other regulatory agencies requesting additional studies to show that our product candidate is superior to the new products.

Our clinical trial results may also not support approval. In addition, our product candidates could fail to receive regulatory approval for many reasons, including the following:

the FDA or comparable foreign regulatory authorities may disagree with the design or implementation of our clinical trials;

we may be unable to demonstrate to the satisfaction of the FDA or comparable foreign regulatory authorities that our product candidates are safe and effective for any of their proposed indications;

the results of clinical trials may not meet the level of statistical significance required by the FDA or comparable foreign regulatory authorities for approval, including due to the heterogeneity of patient populations;

we may be unable to demonstrate that our product candidates’ clinical and other benefits outweigh their safety risks;

the FDA or comparable foreign regulatory authorities may disagree with our interpretation of data from preclinical studies or clinical trials;

the data collected from clinical trials of our product candidates may not be sufficient to the satisfaction of the FDA or comparable foreign regulatory authorities to support the submission of a BLA or other comparable submission in foreign jurisdictions or to obtain regulatory approval in the United States or elsewhere;

70

the FDA or comparable foreign regulatory authorities will inspect our commercial manufacturing facility and may not approve our facility; and

the approval policies or regulations of the FDA or comparable foreign regulatory authorities may significantly change in a manner rendering our clinical data insufficient for approval.

We may seek orphan drug designation for some or all of our product candidates across various indications, but we may be unable to obtain such designations or to maintain the benefits associated with orphan drug designation, including market exclusivity, which may cause our revenue, if any, to be reduced.

Under the Orphan Drug Act, the FDA may grant orphan designation to a drug or biologic intended to treat a rare disease or condition, defined as a disease or condition with a patient population of fewer than 200,000 in the United States, or a patient population greater than 200,000 in the United States when there is no reasonable expectation that the cost of developing and making available the drug or biologic in the United States will be recovered from sales in the United States for that drug or biologic. In order to obtain orphan drug designation, the request must be made before submitting a BLA. In the U.S., orphan drug designation entitles a party to financial incentives such as opportunities for grant funding towards clinical trial costs, tax advantages, and user-fee waivers. After the FDA grants orphan drug designation, the generic identity of the drug and its potential orphan use are disclosed publicly by the FDA. Orphan drug designation does not convey any advantage in, or shorten the duration of, the regulatory review and approval process.

If a product that has orphan drug designation subsequently receives the first FDA approval of that particular product for the disease for which it has such designation, the product is entitled to orphan product exclusivity, which means that the FDA may not approve any other applications, including a BLA, to market the same biologic (meaning, a product with the same principal molecular structural features) for the same indication for seven years, except in limited circumstances such as a showing of clinical superiority to the product with orphan drug exclusivity or if FDA finds that the holder of the orphan drug exclusivity has not shown that it can assure the availability of sufficient quantities of the orphan drug to meet the needs of patients with the disease or condition for which the drug was designated. As a result, even if one of our product candidates receives orphan exclusivity, the FDA can still approve other biologics that do not have the same principal molecular structural features for use in treating the same indication or disease or the same biologic for a different indication or disease during the exclusivity period. Furthermore, the FDA can waive orphan exclusivity if we are unable to manufacture sufficient supply of our product or if a subsequent applicant demonstrates clinical superiority over our products.

We may seek orphan drug designation for some or all of our product candidates in specific orphan indications in which there is a medically plausible basis for the use of these products. Even if we obtain orphan drug designation, exclusive marketing rights in the United States may be limited if we seek approval for an indication broader than the orphan designated indication and may be lost if the FDA later determines that the request for designation was materially defective or if we are unable to assure sufficient quantities of the product to meet the needs of patients with the rare disease or condition, or if a subsequent applicant demonstrates clinical superiority over our products, if approved. In addition, although we may seek orphan drug designation for other product candidates, we may never receive such designations.

Regenerative Medicine Advanced Therapy (RMAT) designation, even if granted for any of our product candidates, may not lead to a faster development or regulatory review or approval process and it does not increase the likelihood that our product candidates will receive marketing approval.

We may seek RMAT designation for one or more of our product candidates. In 2017, the FDA established the RMAT designation to expedite review of a cell therapy, therapeutic tissue engineering product, human cell and tissue product, or any combination product using such therapies or products, with limited exceptions intended to treat, modify, reverse, or cure a serious or life-threatening disease or condition and for which preliminary clinical evidence indicates that the potential to address unmet medical needs for such a disease or condition. RMAT designation provides potential benefits that include more frequent meetings with FDA to discuss the development plan for the product candidate, and eligibility for rolling review and priority review. Products granted RMAT designation may also be eligible for accelerated approval on the basis of a surrogate or intermediate endpoint reasonably likely to predict long-term clinical benefit, or reliance upon data obtained from a meaningful number of sites, including through expansion to additional sites. There is no assurance that we will be able to obtain RMAT designation for any of our product candidates. RMAT designation does not change the FDA’s standards for product approval, and there is no assurance that such designation will result in expedited review or approval or that the approved indication will not be narrower than the indication covered by the designation. Additionally, RMAT designation can be revoked if the criteria for eligibility cease to be met as clinical data emerges.

71

Positive results from early preclinical studies and clinical trials are not necessarily predictive of the results of any future clinical trials of our product candidates, and may change as more patient data becomes available and is subject to audit and verification procedures that could result in material changes in the final data. If we cannot replicate the positive results from our earlier preclinical studies and clinical trials of our product candidates in our future clinical trials, we may be unable to successfully develop, obtain regulatory approval for and commercialize our product candidate.

From time to time, we may publish interim, top-line or preliminary results from our preclinical studies or clinical trials. Such clinical results are subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. Preliminary or top-line results also remain subject to audit and verification procedures that may result in the final data being materially different from the preliminary data we previously published. As a result, interim and preliminary data should be viewed with caution until the final data are available. Data from clinical trials that we may complete are subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. We also make assumptions, estimations, calculations and conclusions as part of our analyses of data, and we may not have received or had the opportunity to fully and carefully evaluate all data. Preliminary or “top line” data also remain subject to audit and verification procedures that may result in the final data being materially different from the preliminary data we previously announced. As a result, interim, “top-line,” and preliminary data should be viewed with caution until the final data are available. Adverse differences between preliminary or interim data and final data could significantly harm our business prospects. It is also difficult to predict the timing of announcing interim results.

Accordingly, any positive results from our preclinical studies and ongoing and future clinical trials of our product candidates may not necessarily be predictive of the results from required later clinical trials. Similarly, even if we are able to complete our planned preclinical studies or any future clinical trials according to our current development timeline, the positive results from such preclinical studies and clinical trials may not be replicated in subsequent preclinical studies or clinical trial results.

Many companies in the pharmaceutical and biotechnology industries have suffered significant setbacks in late-stage clinical trials after achieving positive results in early-stage development, and we cannot be certain that we will not face similar setbacks. These setbacks have been caused by, among other things, preclinical findings made while clinical trials were underway, or safety or efficacy observations made in preclinical studies and clinical trials, including previously unreported adverse events. Moreover, preclinical and clinical data are often susceptible to varying interpretations and analyses and many companies that believed their product candidate performed satisfactorily in preclinical studies and clinical trials nonetheless failed to obtain FDA or similar regulatory approval.

If the clinical updates, or the interim, "top-line", or preliminary data that we report differ from actual results, or if others, including regulatory authorities, disagree with the conclusions reached, our ability to obtain approval for and commercialize our product candidates, our business, operating results, prospects or financial condition may be harmed.

Obtaining and maintaining regulatory approval of our product candidates in one jurisdiction does not mean that we will be successful in obtaining regulatory approval of our product candidates in other jurisdictions.

Obtaining and maintaining regulatory approval of our product candidates in one jurisdiction does not guarantee that we will be able to obtain or maintain regulatory approval in any other jurisdiction, while a failure or delay in obtaining regulatory approval in one jurisdiction may have a negative effect on the regulatory approval process in others. For example, even if the FDA grants marketing approval of a product candidate, comparable regulatory authorities in foreign jurisdictions must also approve the manufacturing, marketing and promotion of the product candidate in those countries. Approval procedures vary among jurisdictions and can involve requirements and administrative review periods different from, and greater than, those in the United States, including additional preclinical studies or clinical trials as clinical studies conducted in one jurisdiction may not be accepted by regulatory authorities in other jurisdictions. In many jurisdictions outside the United States, a product candidate must be approved for reimbursement before it can be approved for sale in that jurisdiction. In some cases, the price that we intend to charge for our products is also subject to approval.

We may also submit marketing applications in other countries. Regulatory authorities in jurisdictions outside of the United States have requirements for approval of product candidates with which we must comply prior to marketing in those jurisdictions. Obtaining foreign regulatory approvals and compliance with foreign regulatory requirements could result in significant delays, difficulties and costs for us and could delay or prevent the introduction of our products in certain countries. If we fail to comply with the regulatory requirements in international markets and/or receive applicable marketing approvals, our target market will be reduced and our ability to realize the full market potential of our product candidates will be harmed.

Additionally, on June 23, 2016, the UK held a referendum in which a majority of voters approved an exit from the EU, or Brexit, and the UK formally left the EU on January 31, 2020. There was a transition period during which EU pharmaceutical laws continued to apply to the UK, which expired on December 31, 2020. However, the EU and the UK have concluded a trade and cooperation agreement, or TCA, which was provisionally applicable since January 1, 2021 and has been formally applicable since May 1, 2021. The TCA includes specific provisions concerning pharmaceuticals, which include the mutual recognition of GMP, inspections of manufacturing facilities for medicinal products and GMP documents issued, but does not foresee wholesale

72

Source: SEC EDGAR (public domain) · 10-K for the period ended 2021-12-31, filed 2022-03-15 · accession 0000950170-22-003753

Filing HTML rendered to line-structured narrative text by the shipped reducer (datafeeds.edgar_fulltext.visible_text, keep_table_headers=True): scripts and inline-XBRL headers are dropped, and table content is reduced to its short label cells — numeric table data is not rendered and is therefore not counted. The same rendering is used for every year, so a year-over-year comparison is like for like.

The text is our rendering of the filing, not a facsimile: original pagination, typography and tables are not reproduced, and the numbers live in the financial statements (FA).

The outline locates item HEADINGS in this document. Only Items 1A and 7 have certified boundaries elsewhere in the terminal (the redline and the narrative-overlap number); every span here runs from one heading found to the next heading found.

How the outline was chosen. It is the longest chain of item headings that runs forward through both the document and the standard item order: 22 headings are on that chain and 16 further heading-shaped lines are not — the table-of-contents echo of every item, cross-references and exhibit-list mentions. Each entry's length is measured from its heading to the next heading on the chain.