WAT · Read the filing

10-K

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

☑ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2021

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

Commission File Number:

01-14010

Waters Corporation

(Exact name of registrant as specified in its charter)

34 Maple Street

Milford, Massachusetts01757

(Address, including zip code, of principal executive offices)

(508) 478-2000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class Trading Symbol(s) Name of each exchange on which registered

Common Stock, par value $0.01 per share WAT New York Stock Exchange, Inc.

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes

☑ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No

☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days

. Yes

☑ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation

S-T

(§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files

Yes

☑ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a

non-accelerated

filer, a smaller reporting company, or emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company”, and “emerging growth company” in

Rule 12b-2

of the Exchange Act. (Check one):

Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit

report.

☑

Indicate by check mark whether the registrant is a shell company (as defined in

Rule 12b-2

of the Act). Yes ☐

☑

State the aggregate market value of the registrant’s common stock held by

non-affiliates

of the registrant as of July 3, 202

: $21,855,696,546.

Indicate the number of shares outstanding of the registrant’s common stock as of February 18, 2022: 60,515,620

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive proxy statement that will be filed for the 2022 Annual Meeting of Stockholders are incorporated by reference in Part III.

Table of Contents

WATERS CORPORATION AND SUBSIDIARIES

ANNUAL REPORT ON FORM

10-K

INDEX

Item No. Page

PART I

1. Business 3

1A. Risk Factors 16

1B. Unresolved Staff Comments 25

2. Properties 26

3. Legal Proceedings 27

4. Mine Safety Disclosures 27

PART II

7A. Quantitative and Qualitative Disclosures About Market Risk 48

8. Financial Statements and Supplementary Data 51

Report of Independent Registered Public Accounting Firm (PCAOB ID 238) 52

9A. Controls and Procedures 102

9B. Other Information 102

9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 102

PART III

10. Directors, Executive Officers and Corporate Governance 102

Information About Our Executive Officers 102

11. Executive Compensation 104

14. Principal Accountant Fees and Services 105

PART IV

15. Exhibits and Financial Statement Schedules 106

Table of Contents

PART I

Item 1:

Business

General

Waters Corporation (the “Company,” “Waters

,” “we,” “our,” or “us”) is a specialty measurement company that operates with a fundamental underlying purpose to advance the science that enables our customers to enhance human health and well-being. Waters has pioneered analytical workflow solutions involving liquid chromatography, mass spectrometry and thermal analysis innovations serving the life, materials and food sciences for more than 60 years. The Company primarily designs, manufactures, sells and services high performance liquid chromatography (“HPLC”), ultra-performance liquid chromatography (“UPLC

” and together with HPLC, referred to as “LC”) and mass spectrometry (“MS”) technology systems and support products, including chromatography columns, other consumable products and comprehensive post-warranty service plans. These systems are complementary products that are frequently employed together

(“LC-MS”)

and sold as integrated instrument systems using common software platforms. In addition, the Company designs, manufactures, sells and services thermal analysis, rheometry and calorimetry instruments through its TA Instruments

(“TA”) product line. The Company is also a developer and supplier of advanced software-based products that interface with the Company’s instruments, as well as other manufacturers’ instruments.

The Company’s products are used by pharmaceutical, biochemical, industrial, nutritional safety, environmental, academic and governmental customers working in research and development, quality assurance and other laboratory applications. LC is a standard technique and is utilized in a broad range of industries to detect, identify, monitor and measure the chemical, physical and biological composition of materials, and to purify a full range of compounds. MS technology, principally in conjunction with chromatography, is employed in drug discovery and development, including clinical trial testing, the analysis of proteins in disease processes (known as “proteomics”), nutritional safety analysis and environmental testing.

LC-MS

instruments combine a liquid phase sample introduction and separation system with mass spectrometric compound identification and quantification. The Company’s thermal analysis, rheometry and calorimetry instruments are used in predicting the suitability and stability of fine chemicals, pharmaceuticals, water, polymers, metals and viscous liquids for various industrial, consumer goods and healthcare products, as well as for life science research.

Waters Corporation, organized as a Delaware corporation in 1991, is a holding company that owns all of the outstanding common stock of Waters Technologies Corporation, its operating subsidiary. Waters Corporation became a publicly-traded company with its initial public offering (“IPO”) in November 1995. Since the IPO, the Company has added two significant and complementary technologies to its range of products with the acquisitions of TA Instruments in May 1996 and Micromass Limited in September 1997.

Business Segments

The Company’s business activities, for which discrete financial information is available, are regularly reviewed and evaluated by the chief operating decision maker. As a result of this evaluation, the Company determined that it has two operating segments: Waters and TA. The Waters operating segment is primarily in the business of designing, manufacturing, selling and servicing LC and MS instrument systems, columns and other precision chemistry consumables that can be integrated and used along with other analytical instruments. The TA operating segment is primarily in the business of designing, manufacturing, selling and servicing thermal analysis, rheometry and calorimetry instruments. The Company’s two operating segments have similar economic characteristics; product processes; products and services; types and classes of customers; methods of distribution; and regulatory environments. Because of these similarities, the two segments have been aggregated into one reporting segment for financial statement purposes.

Information concerning revenues and long-lived assets attributable to each of the Company’s products, services and geographic areas is set forth in Note 18 in the Notes to the Consolidated Financial Statements, which is incorporated herein by reference.

Table of Contents

Waters Products and Markets

High Performance and Ultra Performance Liquid Chromatography

HPLC is a standard technique used to identify and analyze the constituent components of a variety of chemicals and other materials. The Company believes that HPLC’s performance capabilities enable it to separate, identify and quantify a high proportion of all known chemicals. As a result, HPLC is used to analyze substances in a wide variety of industries for research and development purposes, quality control and process engineering applications.

The most significant

end-use

markets for HPLC are those served by the pharmaceutical and life science industries. In these markets, HPLC is used extensively to understand diseases, identify new drugs, develop manufacturing methods and assure the potency and purity of new pharmaceuticals. HPLC is also used in a variety of other applications, such as analyses of foods and beverages for nutritional labeling and compliance with safety regulations and the testing of water and air purity within the environmental testing industry, as well as applications in other industries, such as chemical and consumer products. Waters also has in vitro diagnostic (IVD) labelled products that are used as general-purpose instruments for clinical diagnostic applications, such as newborn screening and therapeutic drug management, in countries where these products are registered. HPLC is also used by universities, research institutions and governmental agencies, such as the United States Food and Drug Administration (“FDA”) and the United States Environmental Protection Agency (“EPA”) and their foreign counterparts that mandate safety and efficacy testing.

In 2004, Waters introduced a novel technology that the Company describes as ultra performance liquid chromatography that utilizes a packing material with small, uniform diameter particles and a specialized instrument, the ACQUITY UPLC

, to accommodate the increased pressure and narrower chromatographic bands that are generated by these small and tightly packed particles. By using the ACQUITY UPLC, researchers and analysts are able to achieve more comprehensive chemical separations and faster analysis times in comparison with many analyses previously performed by HPLC. In addition, in using the ACQUITY UPLC, researchers have the potential to extend the range of applications beyond that of HPLC, enabling them to uncover more levels of scientific information. While offering significant performance advantages, the ACQUITY UPLC is also compatible with the Company’s software products and the general operating protocols of HPLC. For these reasons, the Company’s customers and field sales and support organizations are well positioned to utilize this innovative technology and instrument. In 2018, the Company introduced the ACQUITY ARC

Bio System, a versatile,

iron-free, bio-inert, quaternary

liquid chromatograph specifically engineered to improve bioseparation analytical methods. The Company also introduced the ACQUITY UPLC PLUS series in 2018, consisting of

the H-Class

PLUS, H-Class PLUS

Bio

and I-Class PLUS

systems, which incorporate foundational enhancements into the legacy systems.

Waters manufactures LC instruments that are offered in configurations that allow for varying degrees of automation, from component configured systems for academic teaching and research applications to fully automated systems for regulated and high sample throughput testing, and that have a variety of detection technologies, from optical-based ultra-violet (“UV”) absorbance, refractive index and fluorescence detectors to a suite of

MS-based

detectors, optimized for certain analyses.

In 2019, the Company introduced the ACQUITY

Advanced Polymer Chromatography

System, which is the first fully solvent-compatible UPLC system to perform size exclusion, gradient polymer elution and solvent compatible reversed-phase liquid chromatographic separations on a single platform. The

all-in-one

system gives research scientists greater analytical versatility and speed when conducting research on next-generation polymers. In 2020, the Company introduced the Waters Arc

HPLC System, a new HPLC system for routine testing in the pharmaceutical, food, academic and materials markets. A key target application is quality control in laboratories performing batch release tests on small molecule pharmaceuticals. In 2021, the Company introduced the new ACQUITY PREMIER LC solution and the Arc Premier System both featuring Waters’ MaxPeak

High Performance Surface (“HPS”) technology. MaxPeak

HPS technology, which was first introduced with the

Table of Contents

Company’s introduction of ACQUITY

PREMIER Columns in 2020, is a surface technology that forms a barrier between the sample and the metal surfaces of both the system and column, eliminating the need for system passivation, mitigating the loss of metal-sensitive analytes and yielding higher quality data in less time and effort.

The primary consumable products for LC are chromatography columns. These columns are packed with separation media used in the LC testing process and are typically replaced at regular intervals. The chromatography column contains one of several types of packing material, typically stationary phase particles made from silica or polymeric resins. As a pressurized sample is introduced to the column inlet and permeates through the packed column, it is separated into its constituent components.

Waters HPLC columns can be used on Waters-branded and competitors’ LC systems. The Company believes that it is one of a few suppliers in the world that manufactures silica and polymeric resins, packs columns and distributes its own products. In doing so, the Company believes it can better ensure product consistency, a key attribute for its customers in quality control laboratories, and can react quickly to new customer requirements. The Company believes that its ACQUITY UPLC lines of columns are used primarily on its ACQUITY UPLC instrument systems and, furthermore, that its ACQUITY UPLC instruments primarily use ACQUITY UPLC columns. In 2019, the Company introduced the BioResolv SCX mAb Columns and VanGuard

FIT Cartridge technologies. These new cation exchange column lines with specialized consumables are designed to simplify and improve the characterization and monitoring of monoclonal antibody (mAb) therapeutics, as well as enable mAb charge-variant analyses as required by the World Health Organization, the FDA and the International Conference on Harmonization for confirming the efficacy and safety of biologics and biosimilars with discovery, development and manufacturing applications. In 2020, Waters introduced ACQUITY

PREMIER Columns, a new family of premium

sub-2-micron

columns featuring MaxPeak

HPS technology. The columns are for use with any brand of UPLC system and can measurably improve data quality by mitigating the loss of sample analytes due to

analyte-to-surface

interactions.

The Company’s precision chemistry consumable products also include environmental and nutritional safety testing products, including Certified Reference Materials (“CRM”s) and Proficiency Testing (“PT”) products. Laboratories around the world and across multiple industries use these products for quality control and proficiency testing and also purchase product support services required to help with their federal and state mandated accreditation requirements or with quality control over critical pharmaceutical analysis.

In 2020, the Company acquired all of the outstanding stock of Andrew Alliance, S.A. and its two operating subsidiaries, Andrew Alliance USA, Inc. and Andrew Alliance France, SASU (collectively, “Andrew Alliance”), for $80 million, net of cash acquired. Andrew Alliance offers lab workflow automation solutions with the combination of its software platform and smart, connected laboratory equipment and accessories. The Company expects the acquisition to positively impact our customers’ workflows by improving the repeatability, performance and speed of laboratory operations and chemistry workflows.

Mass Spectrometry and Liquid Chromatography-Mass Spectrometry

MS is a powerful analytical technology that is used to identify unknown compounds, to quantify known materials and to elucidate the structural and chemical properties of molecules by measuring the masses of molecules that have been converted into ions.

The Company is a technology and market leader in the development, manufacture, sale and service of MS instruments and components. These instruments are typically integrated and used along with other complementary analytical instruments and systems, such as LC, chemical electrophoresis and gas chromatography. A wide variety of instrumental designs fall within the overall category of MS instrumentation, including devices that incorporate quadrupole, ion trap,

time-of-flight

(“Tof”), magnetic sector and ion mobility technologies. Furthermore, these technologies are often used in tandem

(MS-MS)

to maximize the speed and/or efficacy of certain experiments.

Table of Contents

Currently, the Company offers a wide range of MS instrument systems utilizing various combinations of quadrupole, Tof and ion mobility designs. These instrument systems are used in drug discovery and development, as well as for environmental, clinical and nutritional safety testing. The overwhelming majority of mass spectrometers sold by the Company are designed to utilize an LC system and a liquid compatible interface (such as an electrospray ionization source) as the sample introduction device. These products supply a diverse market with a strong emphasis on the pharmaceutical, biomedical, clinical, food and beverage and environmental market segments worldwide.

MS is an increasingly important detection technology for LC. The Company’s

smaller-sized

mass spectrometers, such as the single quadrupole detector (“SQD”) and the tandem quadrupole detector (“TQD”), are often referred to as LC “detectors” and are typically sold as part of an LC system or as an LC system upgrade. Larger quadrupole systems, such as the Xevo

TQ and Xevo

TQ-S

instruments, are used primarily for experiments performed for late-stage drug development, including clinical trial testing. Quadrupole

time-of-flight

(“Q-Tof”) instruments, such as the Company’s SYNAPT

G2-S,

are often used to analyze the role of proteins in disease processes, an application sometimes referred to as “proteomics”.

LC and MS are typically embodied within an analytical system tailored for either a dedicated class of analyses or as a general purpose analytical device. An increasing percentage of the Company’s customers are purchasing LC and MS components simultaneously and it has become common for LC and MS instrumentation to be used within the same laboratory and operated by the same user. The descriptions of LC and MS above reflect the historical segmentation of these analytical technologies and the historical categorization of their respective practitioners. Increasingly in today’s instrument market, this segmentation and categorization is becoming obsolete as a high percentage of instruments used in the laboratory embody both LC and MS technologies as part of a single device. In response to this development and to further promote the high utilization of these hybrid instruments, the Company has organized its Waters operating segment to develop, manufacture, sell and service integrated

LC-MS

systems.

In 2019, the Company introduced the BioAccord

system, a liquid chromatography-mass spectrometry solution that expands access to high-resolution

time-of-flight

mass spectrometry capabilities. The system provides new levels of user experience with automated setup and self-diagnosis delivered through an intuitive user interface. Also in 2019, the Company introduced the Cyclic IMS system, which seamlessly integrates cyclic ion mobility technology into a high-performance research-grade

time-of-flight

mass spectrometer. In addition, the Company introduced the SYNAPT XS, a new highly flexible, high-resolution mass spectrometer for research and development labs focused on discovery applications. The Company also reinforced its tandem quadrupole mass spectrometry portfolio during the current year with upgrades to the Xevo

TQ-S

micro and the introduction of the new Xevo

TQ-S

cronos. The Xevo

TQ-S

micro features new performance enhancements that bring the quantitation of highly polar, ionic compounds in food to a higher level. The Xevo

TQ-S

cronos is a new, tandem quadrupole mass spectrometer purposely-built for routine quantitation of large numbers of small-molecule organic compounds over a wide concentration range. The Xevo

TQ-S

micro and the Xevo

TQ-S

cronos are also well suited to meet regulatory requirements for pesticide residue analysis, the monitoring for contaminants in processed foods, identifying drugs of abuse, and performing impurity profiling of pharmaceuticals. In 2020, the Company introduced the new RADIAN

ASAP

System, a novel direct mass detector engineered for

non-mass

spectrometry experts to conduct fast and accurate analyses of solids and liquids with minimal sample prep. Also in 2020, the Company introduced enhancements for the Waters Xevo

G2-XS

QTof SYNAPT XS and SELECT SERIES Cyclic IMS, including a new fragmentation technique and imaging option. In 2021, the Company introduced the Waters SELECT SERIES

MRT, a high-resolution mass spectrometer that combines Multi-Reflecting

Time-of-Flight

(“MRT”) technology with enhanced desorption electrospray ionization and new matrix-assisted laser desorption ionization imaging sources. The platform will serve as the basis for Waters’ next generation Tof instruments with applications in pharmaceutical, biomedical, natural products, and materials research. Also in 2021, the Company released the ACQUITY RDa

Detector featuring SmartMS

, the company’s newest Tof MS designed to improve the ease and reliability of small molecule analysis for pharmaceutical, academic, food, and forensic applications. The Company also introduced a new peptide

Table of Contents

multi-attribute method workflow for the BioAccord

LC-MS

system in 2021, which is an end to end workflow for analyzing monoclonal antibodies and other protein and peptide based drugs.

Based upon 2021 reports from independent marketing research firms and publicly-disclosed sales figures from competitors, the Company believes that it is one of the world’s largest manufacturers and distributors of LC and

LC-MS

instrument systems, chromatography columns and other consumables and related services.

The Company has been a developer and supplier of software-based products that interface with both the Company’s and other suppliers’ instruments. The Company’s newest software technology is the waters_connect

platform. In 2019, the Company introduced the first of a series of applications on this platform supporting the BioAccord system and the Xevo G2 XS mass spectrometers. These applications support biopharmaceutical workflows, simplifying the collection of often complex LCMS data for use in biopharmaceutical development and into QC where it is used to assure the quality of existing medicines and new drug formulations. The platform design of waters_connect has enabled rapid delivery of several major updates including new biopharma application workflows designed in close collaboration with biopharmaceutical innovators to solve specific challenges they face with existing solutions. The platform also provides the foundation for the connected lab of the future where data is no longer siloed but can be securely shared among a community of connected scientists. Waters_connect joins the existing suite of informatics products – Empower

Chromatography Data Software, MassLynx

Mass Spectrometry Software and NuGenesis

Scientific Data Management System, each of which is used to support innovations within world-leading institutions. In 2020, Waters announced the availability of Waters Empower BC LAC/ETM with SecureSync, a newly enhanced solution to preserve the ability for laboratories to work locally when organizations with distributed laboratory environments experience an enterprise interruption.

On December 15, 2020, the Company acquired all of the outstanding stock of Integrated Software Solutions Pty Limited and its two operating subsidiaries Integrated Software Solutions Limited and Integrated Software Solutions USA, LLC (collectively, “ISS”), for $4 million, net of cash acquired. In addition, the Company may have to pay additional consideration which has an estimated fair value of $1 million as of the close date. The contingent consideration is recorded as a liability and will be paid to the prior shareholders of ISS if certain revenue and customer account conditions are achieved over the next two years after the acquisition date. ISS offers clinical laboratory software systems that will support and further expand product offerings within our clinical business. The net assets acquired primarily relate to ISS’ laboratory information system,

OMNI-Lab.

Waters Service

Services provided by Waters enable customers to maximize technology productivity, support customer compliance activities and provide transparency into enterprise resource management efficiencies. The customer benefits from improved budget control, data-driven technology adoption and accelerated workflow at a site or on a global perspective. The Company considers its service offerings to be highly differentiated from our competition, as evidenced by a consistent increase in annual service revenues. The Company’s principal competitors in the service market include PerkinElmer, Inc., Agilent Technologies, Inc. and Thermo Fisher Scientific Inc. These competitors can provide certain services on Waters instruments to varying degrees and always present competitive risk.

The servicing and support of instruments, software and accessories is an important source of revenue and represented over 35% of sales for Waters in 2021. These revenues are derived primarily through the sale of support plans, demand services, spare parts, customer performance validation services and customer training. Support plans typically involve scheduled instrument maintenance and an agreement to promptly repair a

non-functioning

instrument in return for a fee described in a contract that is priced according to the configuration of the instrument.

Table of Contents

TA Products and Markets

Thermal Analysis, Rheometry and Calorimetry

Thermal analysis measures the physical or thermodynamic characteristics of materials as a function of temperature. Changes in temperature affect several characteristics of materials, such as their heat flow characteristics, physical state, weight, dimension and mechanical and electrical properties, which may be measured by one or more thermal analysis techniques, including calorimetry. Consequently, thermal analysis techniques are widely used in the development, production and characterization of materials in various industries, such as plastics, chemicals, automobiles, pharmaceuticals and electronics.

Rheometry instruments often complement thermal analyzers in characterizing materials. Rheometry characterizes the flow properties of materials and measures their viscosity, elasticity and deformation under different types of “loading” or other conditions. The information obtained under such conditions provides insight into a material’s behavior during processing, packaging, transport, usage and storage.

Thermal analysis, rheometry and calorimetry instruments are heavily used in material testing laboratories and, in many cases, provide information useful in predicting the suitability and stability of industrial polymers, fine chemicals, pharmaceuticals, water, metals and viscous liquids in various industrial, consumer goods and healthcare products, as well as for life science research. As with systems offered by Waters, a range of instrument configurations is available with increasing levels of sample handling and information processing automation. In addition, systems and accompanying software packages can be tailored for specific applications.

In 2019, TA introduced a range of new instruments including the TMA 450, a Rheo-Raman

capability for the DHR product line, and a High Sensitivity Pressure Cell for the

ARES-G2

Rheometer. The Discovery

TMA 450, precisely measures dimensional changes of materials from (150) to 1,000

C and handles virtually all sample configurations for testing in expansion, compression, flexure and tension modes. The Rheo-Raman capability for the DHR product line combines a Raman spectrometer with the DHR to enable simultaneous collection of rheology and Raman spectroscopy data. This combination allows for direct correlation between flow characteristics and the unique spectroscopic fingerprints of each material including information about its chemical and morphological structure. The High Sensitivity Pressure Cell for the

ARES-G2

Rheometer enables scientists to perform sensitive viscoelastic measurements under controlled atmospheric pressure and temperature and gain detailed understanding of complex fluid behavior in complex environments. Also in 2019, TA introduced the MSF16 Multi-Specimen Fatigue Instrument. The MSF16 extends the capability of accelerated cyclic components and products under repeated loading, significantly accelerating fatigue analysis.

In 2020, TA introduced the new Discovery X3 Differential Scanning Calorimeter (“X3 DSC”), Discovery Hybrid Rheometers and TAM IV Micro XL isothermal microcalorimeter. The X3 DSC accelerates productivity in customers’ laboratories by enabling three samples to be measured in a single experiment, compared to the single-sample series operation of the other available DSC offerings in the market. This particularly addresses a need in high-throughput laboratories in industries such as composites, electronics and polymer manufacturing. The new line of Discovery Hybrid Rheometers provides increased sensitivity and versatility of rheometry measurements, supporting the development of next-generation, high-performance materials by improving the productivity and efficiency of materials science research. The TAM IV Micro XL isothermal calorimeter supports the development of new battery chemistries by measuring self-discharge and unwanted reactions that reduce battery life and efficiency.

In 2021, TA introduced the TMA 450RH and the Discovery SA. The TMA 450RH provides measurements of dimensional compatibility of materials under controlled temperature and humidity that are important for the development of new electronic devices. The Discovery SA is used in pharmaceutical development to assess the impact of moisture in drug product processing and storage on crystalline structure, which is related to drug product efficacy.

Table of Contents

In 2021, TA introduced the TRIOS AutoPilot software for its thermal analyzer product line. This software helps laboratory staff using TA’s thermal analyzers create routine and streamlined standard operating procedures improving the speed and productivity of thermal analysis measurements.

TA Service

Similar to Waters, the servicing and support of TA’s instruments is an important source of revenue and represented more than 20% of sales for TA in 2021. TA operates independently from the Waters operating segment, though many of its overseas offices are situated in Waters’ facilities to achieve operational efficiencies. TA has dedicated field sales and service operations. Service sales are primarily derived from the sale of support plans, replacement parts and billed labor fees associated with the repair, maintenance and upgrade of installed systems.

Global Customers

The Company typically has a broad and diversified customer base that includes pharmaceutical accounts, other industrial accounts, universities and governmental agencies. Purchase of the Company’s instrument systems is often dependent on its customers’ capital spending, or funding as in the cases of academic, governmental and research institutions, which often fluctuate from year to year. The pharmaceutical segment represents the Company’s largest sector and includes multinational pharmaceutical companies, generic drug manufacturers, contract research organizations (“CRO”s) and biotechnology companies. The Company’s other industrial customers include chemical manufacturers, polymer manufacturers, food and beverage companies and environmental testing laboratories. The Company also sells to universities and governmental agencies worldwide. The Company’s technical sales and support staff members work closely with its customers in developing and implementing applications that meet their full range of analytical requirements. During 2021, 60% of the Company’s net sales were to pharmaceutical accounts, 30% to other industrial accounts and 10% to academic institutions and governmental agencies.

The Company typically experiences an increase in sales in the fourth quarter, as a result of purchasing habits for capital goods of many customers who tend to exhaust their spending budgets by calendar year end. The Company does not rely on any single customer for a material portion of its sales. During fiscal years 2021, 2020 and 2019, no single customer accounted for more than 2% of the Company’s net sales.

Sales and Service

The Company has one of the largest direct sales and service organizations focused exclusively on the analytical workflows offered by the Company. Across these product technologies, using respective specialized sales and service workforces, the Company serves its customer base with 82 sales offices throughout the world as of December 31, 2021 and approximately 4,300, 4,000 and 4,000 field representatives in 2021, 2020 and 2019, respectively. This investment in sales and service personnel serves to maintain and expand the Company’s installed base of instruments. The Company’s sales representatives have direct responsibility for account relationships, while service representatives work in the field to install instruments, train customers and minimize instrument downtime.

In-house

and field-based technical support representatives work directly with customers, providing them assistance with applications and procedures on Company products. The Company provides customers with comprehensive information through various corporate and regional internet websites and product literature, and also makes consumable products available through electronic ordering facilities and a dedicated catalog.

Manufacturing and Distribution

The Company provides high product quality by overseeing each stage of the production of its instruments, columns and chemical reagents.

Table of Contents

The Company currently assembles a portion of its LC instruments at its facility in Milford, Massachusetts, where it performs machining, assembly and testing. The Milford facility maintains quality management and environmental management systems in accordance with the requirements of ISO 9001:2015, ISO 13485:2016 and ISO 14001:2015, and adheres to applicable regulatory requirements (including the FDA Quality System Regulation and the European

In-Vitro

Diagnostic Directive). The Company outsources manufacturing of certain electronic components, such as computers, monitors and circuit boards, to outside vendors that meet the Company’s quality requirements. In addition, the Company outsources the manufacturing of certain LC instrument systems and components to well-established contract manufacturing firms in Singapore. The Company’s Singapore entity is ISO 9001:2015 certified and manages all Asian outsourced manufacturing as well as the distribution of all products from Asia. The Company may pursue outsourcing opportunities as they arise but believes it maintains adequate supply chain and manufacturing capabilities in the event of disruption or natural disasters.

The Company primarily manufactures and distributes its LC columns at its facilities in Taunton, Massachusetts and Wexford, Ireland. In February 2018, the Company’s Board of Directors approved expanding its Taunton location. The Company has incurred costs of $200 million on this facility through the end of 2021, and anticipates spending approximately $50 million to complete this new state-of-the-art facility in 2022. The Taunton facility processes, sizes and treats silica and polymeric media that are packed into columns, solid phase extraction cartridges and bulk shipping containers in both Taunton and Wexford. The Wexford facility also manufactures and distributes certain data, instruments and software components for the Company’s LC, MS and TA product lines. The Company’s Taunton facility is certified to ISO 9001:2015. The Wexford facility is certified to ISO 9001:2015 and ISO 13485:2016/EN ISO 13485:2016. VICAM

manufactures antibody-linked resins and magnetic beads that are packed into columns and kits in Milford, Massachusetts and Nixa, Missouri. The Company manufactures and distributes its Analytical Standards and Reagents and Environmental Resource Associates (“ERA”) product lines at its facility in Golden, Colorado, which is certified to ISO 9001:2015 and accredited to ISO/IEC 17025:2017, ISO/IEC 17034:16 and ISO Guide 34. Some ERA products are also manufactured in the Wexford, Ireland facility, which is also accredited to ISO/IEC 17025:2005, ISO/IEC 17034:2016.

The Company manufactures and distributes its MS products at its facilities in Wilmslow, England and Wexford, Ireland. Certain components or modules of the Company’s MS instruments are manufactured at its facility in Solihull, England and by long-standing outside contractors. Each stage of this supply chain is closely monitored by the Company to maintain high quality and performance standards. The instruments, components or modules are then returned to the Company’s facilities, where its engineers perform final assembly, calibrations to customer specifications and quality control procedures. The Company’s MS facilities are certified to ISO 9001:2015 and ISO 13485:2016/EN ISO 13485:2016 and adhere to applicable regulatory requirements (including the FDA Quality System Regulation and the European

In-Vitro

Diagnostic Directive).

TA’s thermal analysis, rheometry and calorimetry products are manufactured and distributed at the Company’s New Castle, Delaware, Eden Prairie, Minnesota, Lindon, Utah and Huellhorst, Germany facilities. Similar to MS, elements of TA’s products are manufactured by outside contractors and are then returned to the Company’s facilities for final assembly, calibration and quality control. The Company’s New Castle facility is certified to ISO 9001:2015 and ISO 17025:2005 standards and the Eden Prairie facility is certified to both ISO 9001:2015 and ISO/IEC 17025:2017 standards, and the Lindon facility is certified to ISO 9001:2015.

Raw Materials

The Company purchases a variety of raw materials, primarily consisting of high temperature alloy sheet metal and castings, forgings,

pre-plated

metals and electrical components from various vendors. The materials used by the Company’s operations are generally available from a number of sources and in sufficient quantities to meet current requirements subject to normal lead times.

Table of Contents

The Company is subject to rules of the Securities and Exchange Commission (“SEC”) under the Dodd-Frank Wall Street Reform and Consumer Protection Act, requiring disclosure as to whether certain materials (tantalum, tin, gold and tungsten), known as conflict minerals, which may be contained in the Company’s products, are mined from the Democratic Republic of the Congo and adjoining countries. In 2020, the Company was not able to determine with certainty the country of origin of some of the conflict minerals in its manufactured products. However, the Company does not have knowledge that any of its conflict minerals originated from the Democratic Republic of the Congo or adjoining countries. The Company is in the process of evaluating its 2021 supply chain, and the Company plans to file its 2021 Form SD with the SEC in May 2022. The results of this and future evaluations may impose additional costs and may introduce new risks related to the Company’s ability to verify the origin of any conflict minerals contained in its products.

In addition, the Company continues to monitor environmental health and safety regulations in countries in which it operates throughout the world, in particular, European Union and China Restrictions on the use of certain Hazardous Substances in electrical and electronic equipment (RoHS) and European Union Waste Electrical and Electronic Equipment directives. Further information regarding these regulations is available on the Company’s website,

www.waters.com

, under the caption “About Waters / Corporate Governance”.

Research and Development

The Company maintains an active research and development program focused on the development and commercialization of products that extend, complement and update its existing product offering. The Company’s research and development expenditures for 2021, 2020 and 2019 were $168 million, $141 million and $143 million, respectively. In addition, the Company is party to an existing licensing arrangement for certain intellectual property relating to mass spectrometry technologies yet to be commercialized and for which there was no future alternative use as of the acquisition date. This licensing arrangement is significantly related to new, biologically-focused applications, as well as other applications, and requires the Company to make additional future payments of up to $7 million if certain milestones are achieved, as well as royalties on future net sales.

Nearly all of the Company’s LC products have been developed at the Company’s main research and development center located in Milford, Massachusetts, with input and feedback from the Company’s extensive field organizations and customers. The majority of the Company’s MS products are developed at facilities in England and most of the Company’s current materials characterization products are developed at the Company’s research and development center in New Castle, Delaware. At December 31, 2021, 2020 and 2019, there were 1,150, 1,112 and 1,089 employees, respectively, involved in the Company’s research and development efforts. The Company has increased research and development expenses from its continued commitment to invest significantly in new product development and existing product enhancements, and as a result of acquisitions. Despite the Company’s active research and development programs, there can be no assurance that the Company’s product development and commercialization efforts will be successful or that the products developed by the Company will be accepted by the marketplace.

In 2020, the Company opened a new research laboratory in Cambridge, MA, which will serve as a strategic, collaborative space in the community, where Waters can partner with academia, research and industry to accelerate the next generation of scientific advancements.

Human Capital

We believe that our people differentiate our business and are vital to our continued success. As a result, we have made important investments in our workforce through initiatives and programs that support talent development and inclusion and enhance our Total Rewards programs.

Table of Contents

Employees

The Company employed approximately 7,800, 7,400 and 7,500 employees at December 31, 2021, December 31, 2020 and 2019, respectively, with approximately 39% of the Company’s employees located in the United States. The Company believes its employee relations are generally good. The Company’s employees are not unionized or affiliated with any internal or external labor organizations.

Talent Development

We believe that our future success depends in a significant part on our continued ability to attract and retain highly skilled employees and then contribute to the growth and development of these employees.

We further the growth and development of our employees by investing in various programs, digital platforms and workshops that build professional and technical skills.

Inclusion & Diversity

We believe inclusion is a core tenet of organizational success and that fostering a sense of inclusivity allows our employees to maximize their performance contribution to our business. We celebrate difference and diversity in our Employee Circles, which are composed of employees from throughout the company, which provide a forum in which to promote topics related to diversity and inclusion focusing on gender, Multicultural, Veterans and LGBTQ+ employees and allies. All employees are encouraged to participate in these Employee Circles at the local and global levels. We have also rolled out training to all employees to support an inclusive culture that values diverse perspectives.

We believe that part of fostering an inclusive and increasingly racially and ethnically diverse workforce requires understanding the makeup of our current employees. As of December 31, 2021, our workforce is:

Recruitment

Waters has focused on expanding diversity in our recruitment processes. We have developed hiring partnerships with agencies such as the National Society of Black Engineers, Recruit Military, Out in Tech and Power to Fly to expand the pipeline of strong candidates.

Health and Safety

The health and safety of our employees is our highest priority. Through online and

in-person

training programs, we believe that we foster a safe workplace and ensure that all employees are empowered to prevent accidents and injuries.

We manufacture products deemed essential to critical infrastructure, including health and safety, food and agriculture, and energy, and as a result, the majority of our production sites continued operating during the

COVID-19

pandemic.

During the pandemic, we invested in maintaining safe work environments for our employees. We responded to the

COVID-19

pandemic by, among other things:

• Adding work from home flexibility;

• Adjusting attendance policies to encourage those who are sick to stay home;

Table of Contents

• Increasing cleaning protocols across all work locations;

• Modifying workspaces as appropriate;

Competition

The analytical instrument systems, supplies and services market is highly competitive. The Company encounters competition from several worldwide suppliers and other companies in both domestic and foreign markets for each of its three primary technologies. The Company competes in its markets primarily on the basis of product performance, reliability, service and, to a lesser extent, price. Competitors continuously introduce new products and have instrument businesses that are generally more diversified than the Company’s business. Some competitors have greater financial resources and broader distribution than the Company’s.

In the markets served by Waters, the Company’s principal competitors include: Agilent Technologies, Inc., Shimadzu Corporation, Bruker Corporation, Danaher Corporation and Thermo Fisher Scientific Inc. In the markets served by TA, the Company’s principal competitors include: PerkinElmer, Inc., NETZSCH-Geraetebau GmbH, Thermo Fisher Scientific Inc., Malvern PANalytical Ltd., a subsidiary of Spectris plc, Mettler-Toledo International Inc. and Anton-Paar GmbH.

The market for consumable LC products, including separation columns, is highly competitive and generally more fragmented than the analytical instruments market. The Company encounters competition in the consumable columns market from chemical companies that produce column sorbents and small specialized companies that primarily pack purchased sorbents into columns and subsequently package and distribute columns. The Company believes that it is one of the few suppliers that processes silica and polymeric resins, packs columns and distributes its own products. The Company competes in this market on the basis of performance, reproducibility, reputation and, to a lesser extent, price. In recent years, the Company’s principal competitors for consumable products have included: Danaher Corporation; Merck KGaA; Agilent Technologies, Inc.; General Electric Company and Thermo Fisher Scientific Inc. The ACQUITY UPLC instrument is designed to offer a predictable level of performance when used with ACQUITY UPLC columns and the Company believes that the expansion of the ACQUITY UPLC instrument base will enhance its chromatographic column business because of the high level of synergy between ACQUITY UPLC columns and the ACQUITY UPLC instruments.

Patents, Trademarks and Licenses

The Company owns a number of United States and foreign patents and has patent applications pending in the United States and abroad. Certain technology and software has been acquired or is licensed from third parties. The Company also owns a number of trademarks. The Company’s patents, trademarks and licenses are viewed as valuable assets to its operations. However, the Company believes that no one patent or group of patents, trademark or license is, in and of itself, essential to the Company such that its loss would materially affect the Company’s business as a whole.

Environmental Matters and Climate Change

The Company is subject to foreign and U.S. federal, state and local laws, regulations and ordinances that (i) govern activities or operations that may have adverse environmental effects, such as discharges to air and

Table of Contents

water as well as handling and disposal practices for solid and hazardous wastes, and (ii) impose liability for the costs of cleaning up and certain damages resulting from sites of past spills, disposals or other releases of hazardous substances. The Company believes that it currently conducts its operations and has operated its business in the past in substantial compliance with applicable environmental laws. From time to time, Company operations have resulted or may result in noncompliance with environmental laws or liability for cleanup pursuant to environmental laws. The Company does not currently anticipate any material adverse effect on its operations, financial condition or competitive position as a result of its efforts to comply with environmental laws.

The Company is sensitive to the growing global debate with respect to climate change. An internal sustainability working group develops increasingly robust data with respect to the Company’s utilization of carbon producing substances in an effort to continuously reduce the Company’s carbon footprint. In 2019, the Company published a sustainability report identifying the various actions and behaviors the Company adopted in 2018 concerning its commitment to both the environment and the broader topic of social responsibility. The Company has continued to annually publish a sustainability report detailing the Company’s efforts to address its environmental impact and uphold its social responsibilities. See Item 1A, Risk Factors –

The effects of climate change could harm the Company’s business

, for more information on the potential significance of climate change legislation. See also Note 18 in the Notes to the Consolidated Financial Statements for financial information about geographic areas.

Available Information

The Company files or furnishes all required reports with the SEC. The Company is an electronic filer and the SEC maintains a website that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC. The address of the SEC electronic filing website is

http://www.sec.gov

. The Company also makes available, free of charge on its website, its annual report on

Form 10-K,

quarterly reports on

Form 10-Q,

current reports on

Form 8-K

and any amendments to those reports as soon as reasonably practicable after such material is electronically filed with or furnished to the SEC. The website address for Waters Corporation is

http://www.waters.com

and SEC filings can be found under the caption “Investors”.

Forward-Looking Statements

Certain of the statements in this Form

10-K,

including the information incorporated by reference herein, may contain forward-looking statements with respect to future results and events, including any statements regarding, among other items, anticipated trends or growth in the Company’s business, including, but not limited to, the impact of the ongoing

COVID-19

pandemic; the impact of new or proposed tariff or trade regulations or changes in the interpretation or enforcement of existing regulations; the impact of foreign currency translation on financial results; development of products by acquired businesses; the growth rate of sales and research and development expenses; the impact of costs associated with developing new technologies and bringing these new technologies to market; the impact of new product launches and the associated costs, such as the amortization expense related to software platforms; geographic sales mix of business; development of products by acquired businesses and the amount of contingent payments to the sellers of an acquired business; anticipated expenses, including interest expense, capitalized software costs and effective tax rates; the impact of the Tax Cuts and Jobs Act (the “2017 Tax Act”) in the U.S.; the impact and outcome of the Company’s various ongoing tax audit examinations; the achievement of contractual milestones to preserve foreign tax rates; the impact and outcome of litigation matters; the impact of the loss of intellectual property protection; the impact of new accounting standards and pronouncements; the adequacy of the Company’s supply chain and manufacturing capabilities and facilities; the impact of regulatory compliance; the Company’s expected cash flow, borrowing capacity, debt repayment and refinancing; the Company’s ability to fund working capital, capital expenditures, service debt, repay outstanding lines of credit, make authorized share repurchases, fund potential acquisitions and pay any adverse litigation or tax audit liabilities, particularly in the U.S.; future impairment charges; the Company’s

Table of Contents

contributions to defined benefit plans; the Company’s expectations regarding changes to its financial position; compliance with applicable environmental laws; and the impact of recent acquisitions on sales and earnings.

Many of these statements appear, in particular, in Part II, Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations of this Form

10-K.

Statements that are not statements of historical fact may be deemed forward-looking statements. You can identify these forward-looking statements by the use of the words “feels”, “believes”, “anticipates”, “plans”, “expects”, “may”, “will”, “would”, “intends”, “suggests”, “appears”, “estimates”, “projects”, “should” and similar expressions, whether in the negative or affirmative. These statements are subject to various risks and uncertainties, many of which are outside the control of the Company, including, and without limitation:

Table of Contents

Certain of these and other factors are further described below in Item 1A, Risk Factors, of this Form

10-K.

Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements, whether because of these factors or for other reasons. All forward-looking statements speak only as of the date of this annual report on Form

10-K

and are expressly qualified in their entirety by the cautionary statements included in this report. Except as required by law, the Company does not assume any obligation to update any forward-looking statements.

Item 1A:

Risk Factors

The Company is subject to risks and uncertainties, including, but not limited to, the following:

RISKS RELATED TO THE CORONAVIRUS

(COVID-19)

PANDEMIC

The adverse effects of the continuing

COVID-19

pandemic and an indeterminate recovery period has negatively affected the Company’s business and operations, and may continue to negatively impact the Company’s business and operations, the nature and extent of such impact is highly uncertain.

The impact of the global

COVID-19

pandemic over the last two years has resulted in a widespread public health crisis. The

COVID-19

pandemic has caused significant volatility and continued spread throughout the United States and globally, which has disrupted and may continue to disrupt the Company’s business. The Company operates in over 35 countries, including those in the regions most impacted by the

COVID-19

pandemic. In response, governments of most countries, including the United States, as well as private businesses, have implemented numerous measures attempting to contain and mitigate the effects of

COVID-19.

Such measures have had and are expected to continue to have adverse impacts on the United States and foreign economies of uncertain severity and duration, and have had and may continue to have a negative impact on the Company’s operations, including Company sales, supply chain and cash flow.

The

COVID-19

pandemic has and may continue to have a significant impact on our supply chain if our manufacturing facilities or those of third parties to whom we outsource certain manufacturing processes, the distribution centers where our inventory is managed or the operations of our logistics and other service providers are disrupted, temporarily closed or experience worker shortages. The current logistic and supply chain issues being experienced throughout the world have made it more difficult for us to manage our operations and as such we cannot provide any assurances that any further disruptions in the logistics and supply chains will not have a material impact on our future financial results and cashflows. We have and may continue to have disruptions or delays in shipments of certain materials or components of our products.

In addition, in the event of a sustained downturn in customer demand or other economic conditions due to the

COVID-19

pandemic could result in material charges related to bad debt or inventory write-offs, restructuring charges, or impairments of long-lived assets, including both tangible and intangible assets. Furthermore, such a sustained downturn in financial markets and asset values could adversely affect the Company’s cost of capital, liquidity and access to capital markets.

The

COVID-19

pandemic has caused the Company to take measures to modify its business practices. We have invested in maintaining safe work environments for our employees by, among other things, adding work from home flexibility, adjusting attendance policies to encourage those who are sick to stay at home, increasing cleaning protocols across all work locations, initiating regular communications regarding the impacts of the

COVID-19

pandemic, establishing new physical distancing and safety procedures for employees, modifying workplaces as appropriate and implementing protocols to address actual and suspected

COVID-19

cases and potential exposure. Further, the Company has modified policies regarding employee travel and physical participation in meetings, events and conferences. The Company may take further actions as may be required by government authorities or that the Company determines are in the best interests of, among others, its employees, customers, distributors and suppliers. The Company’s change in business practices may result in the Company experiencing lower workforce efficiency and productivity. In addition, as Company employees work from home

Table of Contents

and access the Company’s systems remotely, the Company may be subject to heightened security risks, including the risks of cyber-attacks. Although we are in

re-opening

processes for our corporate and other facilities, such processes may face future closure requirements. There is no certainty that the Company measures will be sufficient to mitigate the risks posed by

COVID-19,

and the Company’s ability to perform critical functions could be adversely impacted. Furthermore, the Company’s business could be adversely affected if any of the Company’s key management employees are unable to perform their duties for a period of time, including as a result of illness.

The degree to which

COVID-19

ultimately affects the Company’s business, financial results and operations will depend on future developments, which are highly uncertain and cannot be predicted, including, but not limited to, the duration and spread of the outbreak, including the effect of the emergence of variants of the virus, its severity, the actions to contain the virus or treat its impact, the availability, distribution, acceptance and efficacy of a vaccine, and how quickly and to what extent normal economic and operating conditions can resume.

RISKS RELATED TO MACROECONOMIC CONDITIONS

The Company’s international operations may be negatively affected by political events, wars or terrorism and regulatory changes, related to either a specific country or a larger region. These potential political, currency and economic disruptions, as well as foreign currency exchange rate fluctuations, could have a material adverse effect on the Company’s results of operations or financial condition.

Approximately 72% and 71% of the Company’s net sales in 2021 and 2020, respectively, were outside of the United States and were primarily denominated in foreign currencies. In addition, the Company has considerable manufacturing operations in Ireland and the U.K., as well as significant subcontractors located in Singapore. As a result, a significant portion of the Company’s sales and operations are subject to certain risks, including adverse developments in the political, regulatory and economic environment, in particular, uncertainty regarding possible changes to foreign and domestic trade policy; the effect of the U.K.’s exit from the European Union as well as the financial difficulties and debt burden experienced by a number of European countries; the instability and potential impact of war or terrorism; the instability and possible dissolution of the Euro as a single currency; sudden movements in a country’s foreign exchange rates due to a change in a country’s sovereign risk profile or foreign exchange regulatory practices; tariffs and other trade barriers; the impact of global health pandemics and epidemics, such as

COVID-19;

difficulties in staffing and managing foreign operations; and associated adverse operational, contractual and tax consequences.

Additionally, the U.S. dollar value of the Company’s net sales, cost of sales, operating expenses, interest, taxes and net income varies with foreign currency exchange rate fluctuations. Significant increases or decreases in the value of the U.S. dollar relative to certain foreign currencies, particularly the Euro, Japanese yen and British pound, could have a material adverse effect or benefit on the Company’s results of operations or financial condition.

Global economic conditions may decrease demand for the Company’s products and harm the Company’s financial results.

The Company is a global business that may be adversely affected by changes in global economic conditions. These changes in global economic conditions, both inside and outside the U.S., may affect the demand for the Company’s products and services. This may result in a decline in sales in the future, increased rate of order cancellations or delays, increased risk of excess or obsolete inventories, longer sales cycles and potential difficulty in collecting sales proceeds. There can be no assurance regarding demand for the Company’s products and services in the future.

Disruption in worldwide financial markets could adversely impact the Company’s access to capital and financial condition.

Financial markets in the U.S., Europe and Asia have experienced times of extreme disruption, including, among other things, sharp increases in the cost of new capital, credit rating downgrades and bailouts, severely

Table of Contents

diminished capital availability and severely reduced liquidity in money markets. Financial and banking institutions have also experienced disruptions, resulting in large asset write-downs, higher costs of capital, rating downgrades and reduced desire to lend money. There can be no assurance that there will not be future deterioration or prolonged disruption in financial markets or financial institutions. Any future deterioration or prolonged disruption in financial markets or financial institutions in which the Company participates may impair the Company’s ability to access its existing cash, utilize its existing syndicated bank credit facility funded by such financial institutions, and impair its ability to access sources of new capital. The cost to the Company of any new capital raised and interest expense would increase if this were to occur.

RISKS RELATED TO OUR BUSINESS

The Company’s financial results are subject to changes in customer demand, which may decrease for a number of reasons, many beyond the Company’s control.

The demand for the Company’s products is dependent upon the size of the markets for its LC,

LC-MS,

thermal analysis, rheometry and calorimetry products; the timing and level of capital spending and expenditures of the Company’s customers; changes in governmental regulations, particularly affecting drug, food and drinking water testing; funding available to academic, governmental and research institutions; general economic conditions and the rate of economic growth in the Company’s major markets; and competitive considerations. The Company typically experiences an increase in sales in its fourth quarter as a result of purchasing habits for capital goods by customers that tend to exhaust their spending budgets by calendar year end. However, there can be no assurance that the Company will effectively forecast customer demand and appropriately allocated research and development expenditures to products with high growth and high margin prospects. Additionally, there can be no assurance that the Company’s results of operations or financial condition will not be adversely impacted by a change in any of the factors listed above or the continuation of uncertain global economic conditions.

Additionally, the analytical instrument market may, from time to time, experience low sales growth. Approximately 60% and 59% of the Company’s net sales in 2021 and 2020, respectively, were to worldwide pharmaceutical and biotechnology companies, which may be periodically subject to unfavorable market conditions and consolidations. Unfavorable industry conditions could have a material adverse effect on the Company’s results of operations or financial condition.

Competitors may introduce more effective or less expensive products than the Company’s, which could result in decreased sales. The competitive landscape may transform as a result of potential changes in ownership, mergers and continued consolidations among the Company’s competitors, which could harm the Company’s business.

The analytical instrument market and, in particular, the portion related to the Company’s HPLC, UPLC,

LC-MS,

thermal analysis, rheometry and calorimetry product lines, is highly competitive and subject to rapid changes in technology. The Company encounters competition from several international instrument suppliers and other companies in both domestic and foreign markets. Some competitors have instrument businesses that are generally more diversified than the Company’s business, but are typically less focused on the Company’s chosen markets. Over the years, some competitors have merged with other competitors for various reasons, including increasing product line offerings, improving market share and reducing costs. There can be no assurance that the Company’s competitors will not introduce more effective and less costly products than those of the Company or that the Company will be able to increase its sales and profitability from new product introductions. There can be no assurance that the Company’s sales and marketing forces will compete successfully against the Company’s competitors in the future.

Strategies for organic growth require developing new technologies and bringing these new technologies to market, which could negatively impact the Company’s financial results.

The Company’s corporate strategy is fundamentally based on winning through organic innovation and deep application expertise. The Company is in the process of developing new products with recently acquired technologies. The future development of these new products will require a significant amount of spending over

Table of Contents

the next few years before significant, robust sales will be realized. Furthermore, these new products will be sold into both the

non-clinical

and clinical markets, and any new products requiring FDA clearance may take longer to bring to market. There can be no assurance given as to the timing of these new product launches and the ultimate realization of sales and profitability in the future.

The Company’s software or hardware may contain coding or manufacturing errors that could impact their function, performance and security, and result in other negative consequences.

Despite testing prior to the release and throughout the lifecycle of a product or service, the detection and correction of any errors in released software or hardware can be time consuming and costly. This could delay the development or release of new products or services, or new versions of products or services, create security vulnerabilities in the Company’s products or services, and adversely affect market acceptance of products or services. If the Company experiences errors or delays in releasing its software or hardware, or new versions thereof, its sales could be affected and revenues could decline. Errors in software or hardware could expose the Company to product liability, performance and warranty claims as well as harm to brand and reputation, which could impact future sales.

Disruption of operations at the Company’s manufacturing facilities could harm the Company’s financial condition.

The Company manufactures LC instruments at facilities in Milford, Massachusetts and through a subcontractor in Singapore; precision chemistry separation columns at its facilities in Taunton, Massachusetts and Wexford, Ireland; MS products at its facilities in Wilmslow, England, Solihull, England and Wexford, Ireland; thermal analysis and rheometry products at its facilities in New Castle, Delaware and other instruments and consumables at various other locations as a result of the Company’s acquisitions. Any prolonged disruption to the operations at any of these facilities, whether due to labor difficulties, destruction of or damage to any facility or other reasons, could have a material adverse effect on the Company’s results of operations or financial condition.

Failure to adequately protect intellectual property could have materially adverse effects on the Company’s results of operations or financial condition.

There can be no assurance that any patents held by the Company will not be challenged, invalidated or circumvented or that the rights granted thereunder will provide competitive advantages to the Company. Additionally, there could be successful claims against the Company by third-party patent holders with respect to certain Company products that may infringe the intellectual property rights of such third parties. The Company’s patents, including those licensed from others, expire on various dates. If the Company is unable to protect its intellectual property rights, it could have an adverse and material effect on the Company’s results of operations or financial condition.

The Company’s business would suffer if the Company were unable to acquire adequate sources of supply.

Most of the raw materials, components and supplies purchased by the Company are available from a number of different suppliers; however, a number of items are purchased from limited or single sources of supply and disruption of these sources could have, at a minimum, a temporary adverse effect on shipments and the financial results of the Company. A prolonged inability to obtain certain materials or components could have an adverse effect on the Company’s financial condition or results of operations and could result in damage to its relationships with its customers and, accordingly, adversely affect the Company’s business.

The Company’s sales would deteriorate if the Company’s outside contractors fail to provide necessary components or modules.

Certain components or modules of the Company’s LC and MS instruments are manufactured by outside contractors, including the manufacturing of LC instrument systems and related components by contract manufacturing firms in Singapore. Disruptions of service by these outside contractors could have an adverse effect on the supply chain and the financial results of the Company. A prolonged inability to obtain these components or modules could have an adverse effect on the Company’s financial condition or results of operations.

Table of Contents

The Company’s business could be harmed by actions of distributors and other third parties that sell our products.

The Company sells some products through third parties, including distributors and value-added resellers. This exposes us to various risks, including competitive pressure, concentration of sales volumes, credit risks and compliance risks. We may rely on one or a few key distributors for a product or market and the loss of these distributors could reduce our revenue or net earnings. Distributors may also face financial difficulties, including bankruptcy, which could harm our collection of accounts receivable. Violations of the U.S. Foreign Corrupt Practices Act (“FCPA”), the U.K. Bribery Act or similar anti-bribery laws by distributors or other third-party intermediaries could materially impact our business. Risks related to our use of distributors may reduce sales, increase expenses and weaken our competitive position.

The Company’s financial results are subject to unexpected shifts in

pre-tax

income between tax jurisdictions, changing application of tax law and tax audit examinations.

The Company is subject to rates of income tax that range from 0% up to 34% in various jurisdictions in which it conducts business. In addition, the Company typically generates a substantial portion of its income in the fourth quarter of each fiscal year. Geographical shifts in income from previous quarters’ projections caused by factors including, but not limited to, changes in volume and product mix and fluctuations in foreign currency translation rates, could therefore have potentially significant favorable or unfavorable effects on the Company’s income tax expense, effective tax rate and results of operations.

Governments in the jurisdictions in which the Company operates implement changes to tax laws and regulations from time to time. Any changes in corporate income tax rates or regulations regarding transfer pricing or repatriation of dividends or capital, as well as changes in the interpretation of existing tax laws and regulations, in the jurisdictions in which the Company operates could adversely affect the Company’s cash flow and lead to increases in its overall tax burden, which would negatively affect the Company’s profitability.

The Company entered into a new Development and Expansion Incentive in Singapore that provides a concessionary income tax rate of 5% on certain types of income for the period April 1, 2021 through March 31, 2026. Prior to April 1, 2021, the Company had a tax exemption in Singapore on certain types of income, based upon the achievement and continued satisfaction of certain operational and financial milestones, which the Company met as of December 31, 2020 and maintained through March 2021. The Company had determined that it was more likely than not to realize the tax exemption in Singapore and, accordingly, did not recognize any reserves for unrecognized tax benefits on its balance sheet related to this tax exemption. If any of the milestone targets were not met, the Company would not have been entitled to the tax exemption on income earned in Singapore dating back to the start date of the agreement (April 1, 2016), and all the tax benefits previously recognized would be reversed, resulting in the recognition of income tax expense equal to the statutory tax of 17% on income earned during that period.

As a global business, the Company is subject to tax audit examinations in various jurisdictions throughout the world. The Company must manage the cost and disruption of responding to governmental audits, investigation and proceedings. In addition, the impact of the settlement of pending or future tax audit examination could have an unfavorable effect on the Company’s income tax expense, effective tax rate and results of operations.

RISKS RELATED TO HUMAN CAPITAL MANAGEMENT

We may not be able to attract and retain qualified employees.

Our future success depends upon the continued service of our executive officers and other key management and technical personnel, and on our ability to continue to identify, attract, retain and motivate them. Implementing our business strategy requires specialized engineering and other talent, as our revenues are highly dependent on technological and product innovations. The market for employees in our industry is extremely competitive, and competitors for talent, particularly engineering talent, increasingly attempt to hire, and to varying degrees have

Table of Contents

been successful in hiring, our employees. A number of such competitors for talent are significantly larger than us and are able to offer compensation in excess of what we are able to offer. Further, existing immigration laws make it more difficult for us to recruit and retain highly skilled foreign national graduates of universities in the United States, making the pool of available talent even smaller. If we are unable to attract and retain qualified employees, our business may be harmed.

The loss of key members of management and the risks inherent in succession planning could adversely affect the Company’s results of operations or financial condition.

The operation of the Company requires managerial and operational expertise. None of the Company’s key management employees, with the exception of the Chief Executive Officer and Chief Financial Officer, have an employment contract with the Company and there can be no assurance that such individuals will remain with the Company. If, for any reason, other key personnel do not continue to be active in management, the Company’s results of operations or financial condition could be adversely affected.

RISKS RELATED TO CYBERSECURITY AND DATA PRIVACY

Disruption, cyber-attack or unforeseen problems with the security, maintenance or upgrade of the Company’s information and

web-based

systems could have an adverse effect on the Company’s operations and financial condition.

The Company relies on its technology infrastructure and that of its software and banking partners, among other functions, to interact with suppliers, sell products and services, fulfill contract obligations, ship products, collect and make electronic wire and check based payments and otherwise conduct business. The Company’s technology infrastructure may be vulnerable to damage or interruption from, but not limited to, natural disasters, power loss, telecommunication failures, terrorist attacks, computer viruses, unauthorized access to customer or employee data, unauthorized access to and funds transfers from Company bank accounts and other attempts to harm the Company’s systems. For example, in December 2021, a vulnerability named “Log4Shell” was reported for the widely used Java logging library, Apache Log4j 2. We have reviewed the use of this library within our software product portfolio and in our IT environment and have taken steps to mitigate the vulnerability. To date, cybersecurity incidents have not resulted in a material adverse impact to our business or operations, but there can be no guarantee we will not experience such an impact. Additionally, we must maintain and periodically upgrade our information and

web-based

systems, which has caused and will in the future cause temporary interruptions to our technology infrastructure. Any prolonged disruption to the Company’s technology infrastructure, at any of its facilities, could have a material adverse effect on the Company’s results of operations or financial condition.

If the Company’s security measures are compromised or fail to adequately protect its technology infrastructure, research and development efforts or manufacturing operations, the Company’s products and services may be perceived as vulnerable or unreliable, the information protected by the Company’s controls and processes may be subject to unauthorized access, acquisition or modification, the Company’s brand and reputation could be damaged, the services that the Company provides to its customers could be disrupted, and customers may stop using the Company’s products and services, all of which could reduce the Company’s revenue and earnings, increase its expenses and expose the Company to legal claims and regulatory actions.

The Company is in the business of designing, manufacturing, selling and servicing analytical instruments to life science, pharmaceutical, biochemical, industrial, nutritional safety and environmental, academic and governmental customers working in research and development, quality assurance and other laboratory applications, and the Company is also a developer and supplier of software-based products that support instrument systems. Many of the Company’s customers are in highly regulated industries. While the Company has invested time and resources implementing measures designed to protect the integrity and security of its technology infrastructure, research and development processes, manufacturing operations, products and services, and the internal and external data managed by the Company, there is a risk these measures will be defeated or compromised or that they are otherwise insufficient to protect against existing or emerging threats. The Company also has acquired companies, products, services and technologies over time and may face inherent risk when integrating these acquisitions into the Company. In addition, at times, the Company faces attempts by third

Table of Contents

parties to defeat its security measures or exploit vulnerabilities in its systems. These risks will increase as the Company continues to grow and expand geographically, and its systems, products and services become increasingly digital and sensor- and

web-based.

The Company could suffer significant damage to its brand and reputation if a security incident resulted in unauthorized access to, acquisition of, or modification to the Company’s technology infrastructure, research and development processes, manufacturing operations, its products and services as well as the internal and external data managed by the Company. Such an incident could disrupt the Company’s operations and customers could lose confidence in the Company’s ability to deliver quality and reliable products or services. This could negatively impact sales and could increase costs related to fixing and addressing these incidents and any vulnerabilities exposed by them, as well as to lawsuits, regulatory investigations, claims or legal liability including contractual liability, costs and expenses owed to customers and business partners.

RISKS RELATED TO COMPLIANCE, REGULATORY OR LEGAL CHANGES

Compliance failures could harm the Company’s business.

The Company is subject to regulation by various federal, state and foreign governments and agencies in areas including, among others, health and safety, import/export, privacy and data protection, FCPA and environmental laws and regulations. A portion of the Company’s operations are subject to regulation by the FDA and similar foreign regulatory agencies. These regulations are complex and govern an array of product activities, including design, development, labeling, manufacturing, promotion, sales and distribution. Any failure by the Company to comply with applicable governmental regulations could result in product recalls, the imposition of fines, restrictions on the Company’s ability to conduct or expand its operations or the cessation of all or a portion of its operations.

Regulators globally are increasingly imposing greater fines and penalties for privacy and data protection violations, and the European Union has enacted a broad data protection regulation with fines based on a percentage of global revenues. Changes in laws or regulations associated with enhanced protection of certain sensitive types of personal information, such as information related to health, could greatly increase the cost of compliance and the cost of providing the Company’s products or services. Any failure, or perceived failure, by the Company to comply with laws and regulations on privacy, data security or consumer protection, or other policies, public perception, standards, self-regulatory requirements or legal obligations, could result in lost or restricted business, proceedings, actions or fines brought against the Company or levied by governmental entities or others, or could otherwise adversely affect the business and harm the Company’s reputation.

Some of the Company’s operations are subject to domestic and international laws and regulations with respect to the manufacturing, handling, use or sale of toxic or hazardous substances. This requires the Company to devote substantial resources to maintain compliance with those applicable laws and regulations. If the Company fails to comply with such requirements in the manufacturing or distribution of its products, it could face civil and/or criminal penalties and potentially be prohibited from distributing or selling such products until they are compliant.

Some of the Company’s products are also subject to the rules of certain industrial standards bodies, such as the International Standards Organization. The Company must comply with these rules, as well as those of other agencies, such as the United States Occupational Safety and Health Administration. Failure to comply with such rules could result in the loss of certification and/or the imposition of fines and penalties, which could have a material adverse effect on the Company’s operations.

As a publicly-traded company, the Company is subject to the rules of the SEC and the New York Stock Exchange. In addition, the Company must comply with the Sarbanes-Oxley regulations, which require the Company to establish and maintain adequate internal control over financial reporting. The Company’s efforts to comply with such laws and regulations are time consuming and costly. While we continue to enhance our controls, we cannot be certain that we will be able to prevent future significant deficiencies or material

Table of Contents

weaknesses. Failure to comply with such regulations or having inadequate internal controls could have a material adverse effect on the Company’s financial condition and operations, which could cause investors to lose confidence in our reported financial information and could have a negative effect on the trading price of our stock and our access to capital.

The Company is subject to the rules of the SEC under the Dodd-Frank Wall Street Reform and Consumer Protection Act, requiring disclosure as to whether certain materials (tantalum, tin, gold and tungsten), known as conflict minerals, which may be contained in the Company’s products, are mined from the Democratic Republic of the Congo and adjoining countries. In 2020, the Company was not able to determine with certainty the country of origin of some of the conflict minerals in its manufactured products. However, the Company does not have knowledge that any of its conflict minerals originated from the Democratic Republic of the Congo or adjoining countries. The Company is in the process of evaluating its 2021 supply chain, and the Company plans to file its 2021 Form SD with the SEC in May 2022. The results of this and future evaluations may impose additional costs and may introduce new risks related to the Company’s ability to verify the origin of any conflict minerals contained in its products.

The Company may be harmed by improper conduct of any of our employees, agents or business partners.

We cannot provide assurance that our internal controls and compliance systems will always protect the Company from acts committed by employees, agents or business partners that would violate domestic and international laws, including laws governing payments to government officials, bribery, fraud, kickbacks and false claims, pricing, sales and marketing practices, conflicts of interest, competition, export and import compliance, money laundering and data privacy. In particular, the FCPA, the U.K. Bribery Act and similar anti-bribery laws generally prohibit companies and their intermediaries from making improper payments to government officials for the purpose of obtaining or retaining business, and we operate in many parts of the world that have experienced governmental corruption to some degree. Any such improper actions or allegations of such acts could damage our reputation and subject us to civil or criminal investigations in the U.S. and in other jurisdictions and related shareholder lawsuits, could lead to substantial civil and criminal, monetary and

non-monetary

penalties and could cause us to incur significant legal and investigatory fees. In addition, the government may seek to hold us liable as a successor for violations committed by companies in which we invest or that we acquire. We also rely on our suppliers to adhere to our supplier standards of conduct and material violations of such standards of conduct could occur that could have a material effect on our business, reputation and financial statements.

Environmental, social and corporate governance (“ESG”) issues, including those related to climate change and sustainability, may have an adverse effect on our business, financial condition and results of operations and damage our reputation.

There is an increasing focus from certain investors, customers, consumers, employees and other stakeholders concerning ESG matters. Additionally, public interest and legislative pressure related to public companies’ ESG practices continue to grow. If our ESG practices fail to meet regulatory requirements or investor, customer, consumer, employee or other stakeholders’ evolving expectations and standards for responsible corporate citizenship in areas including environmental stewardship and sustainability, support for local communities, Board of Director and employee diversity, human capital management, employee health and safety practices, product quality, supply chain management, corporate governance and transparency, our reputation, brand and employee retention may be negatively impacted, and our customers and suppliers may be unwilling to continue to do business with us.

Customers, consumers, investors and other stakeholders are increasingly focusing on environmental issues, including climate change, energy and water use, plastic waste and other sustainability concerns. Concern over climate change or plastics and packaging materials, in particular, may result in new or increased legal and regulatory requirements to reduce or mitigate impacts to the environment. Changing customer and consumer preferences or increased regulatory requirements may result in increased demands or requirements regarding plastics and packaging materials, including

single-use

and

non-recyclable

plastic products and packaging, other

Table of Contents

components of our products and their environmental impact on sustainability, or increased customer and consumer concerns or perceptions (whether accurate or inaccurate) regarding the effects of substances present in certain of our products. Complying with these demands or requirements could cause us to incur additional manufacturing, operating or product development costs.

If we do not adapt to or comply with new regulations, or fail to meet evolving investor, industry or stakeholder expectations and concerns regarding ESG issues, investors may reconsider their capital investment in our Company, and customers and consumers may choose to stop purchasing our products, which could have a material adverse effect on our reputation, business or financial condition.

GENERAL RISK FACTORS

The effects of climate change could harm the Company’s business.

The Company’s manufacturing processes for certain of its products involve the use of chemicals and other substances that are regulated under various international, federal, state and local laws governing the environment. In the event that any future climate change legislation would require that stricter standards be imposed by domestic or international environmental regulatory authorities with respect to the use and/or levels of possible emissions from such chemicals and/or other substances, the Company may be required to make certain changes and adaptations to its manufacturing processes. Any such changes could have a material adverse effect on the financial statements of the Company.

Another potential effect of climate change is an increase in the severity of global weather conditions. The Company’s manufacturing facilities are located in the U.S., U.K., Ireland and Germany. In addition, the Company manufactures a growing percentage of its HPLC, UPLC and MS products in both Singapore and Ireland. Severe weather and geological conditions or events, including earthquakes, hurricanes and/or tsunamis, could potentially cause significant damage to the Company’s manufacturing facilities in each of these countries. The effects of such damage and the resulting disruption of manufacturing operations and the impact of lost sales could have a material adverse impact on the financial results of the Company.

Estimates and assumptions made in accounting for the Company’s results from operations are dependent on future results, which involve significant judgments and may be imprecise and may differ materially from actual results.

The preparation of consolidated financial statements in conformity with generally accepted accounting principles requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent liabilities at the dates of the financial statements. These estimates and assumptions must be made due to certain information used in preparation of our financial statements which is dependent on future events, cannot be calculated with a high degree of precision from data available or is not capable of being readily calculated based on generally accepted methodologies. The Company believes that the accounting related to revenue recognition, bad debts, inventory valuation, goodwill and intangible assets, income taxes, warranty and installation provisions, litigation, retirement plan obligations, stock-based compensation, business combinations and asset acquisitions, uncertain tax positions and contingencies involves significant judgments and estimates. Actual results for all estimates could differ materially from the estimates and assumptions used, which could have a material adverse effect on our financial condition and results of operations.

The Company’s financial condition and results of operations could be adversely affected by changes to the Company’s retirement plans or retirement plan assets.

The Company sponsors various retirement plans, both inside and outside the United States. Any changes in regulations made by governments in countries in which the Company sponsors retirement plans could adversely impact the Company’s cash flows or results of operations. In connection with these retirement plans, the Company is exposed to market risks associated with changes in the various capital markets. For example, changes in long-term interest rates affect the discount rate that is used to measure the Company’s retirement plan

Table of Contents

obligations and related expense. In addition, changes in the market value of investments held by the retirement plans could materially impact the funded status of the retirement plans, and affect the related pension expense and level and timing of contributions required under applicable laws.

The Company’s financial condition and results of operations could be adversely affected if the Company is unable to maintain a sufficient level of cash flow.

The Company had $1.5 billion in debt and $569 million in cash, cash equivalents and investments as of December 31, 2021. As of December 31, 2021, the Company also had the ability to borrow an additional $1.6 billion from its existing, committed credit facility. All but a small portion of the Company’s debt was in the U.S. There is a substantial cash requirement in the United States to fund operations and capital expenditures, service debt interest obligations, finance potential United States acquisitions and continue authorized stock repurchase programs. As such, the Company’s financial condition and results of operations could be adversely impacted if the Company is unable to generate and maintain a sufficient level of cash flow to address these requirements through (1) cash from operations, (2) the Company’s ability to access its existing cash and revolving credit facility, (3) the ability to expand the Company’s borrowing capacity and (4) other sources of capital obtained at an acceptable cost.

Debt covenants, and the Company’s failure to comply with them, could negatively impact the Company’s capital and financial results.

The Company’s debt is subject to restrictive debt covenants that limit the Company’s ability to engage in certain activities that could otherwise benefit the Company. These debt covenants include restrictions on the Company’s ability to enter into certain contracts or agreements, which may limit the Company’s ability to make dividend or other payments, secure other indebtedness, enter into transactions with affiliates and consolidate, merge or transfer all or substantially all of the Company’s assets. The Company is also required to meet specified financial ratios under the terms of the Company’s debt agreements. The Company’s ability to comply with these financial restrictions and all other covenants is dependent on the Company’s future performance, which is subject to, but not limited to, prevailing economic conditions and other factors, including factors that are beyond the Company’s control, such as foreign exchange rates, interest rates, changes in technology and changes in the level of competition.

Item 1B:

Unresolved Staff Comments

None.

Table of Contents

Item 2:

Properties

Waters Corporation operates 19 United States facilities and 69 international facilities, including field offices. The Company believes its facilities are suitable and adequate for its current production level and for reasonable growth over the next several years. The Company’s primary facilities are summarized in the table below.

Primary Facility Locations (1)

Location Function (2) Owned/Leased

Golden, CO M, R, S, D, A Leased

New Castle, DE M, R, S, D, A Owned

Franklin, MA D Leased

Milford, MA M, R, S, A Owned

Taunton, MA M, R Owned

Cambridge, MA R, S Leased

Eden Prairie, MN M, R, S, D, A Leased

Nixa, MO M, S, D, A Leased

Lindon, UT M, R, S, D, A Leased

Beijing, China S, A Leased

Shanghai, China S, A Leased

Solihull, England M, A Owned

Wilmslow, England M, R, S, D, A Owned

St. Quentin, France S, A Leased

Huellhorst, Germany M, R, S, D, A Owned

Hong Kong S, A Leased

Wexford, Ireland M, R, D, A Owned

Bangalore, India M, S, D, A Owned

Etten-Leur, Netherlands S, D, A Owned

Brasov, Romania R, A Leased

Singapore R, S, D, A Leased

Table of Contents

The Company operates and maintains 9 field offices in the United States and 56 field offices abroad in addition to sales offices in the primary facilities listed above. The Company’s field office locations are listed below.

Field Office Locations (3)

United States International

Costa Mesa, CA Australia Hungary Norway

Pleasanton, CA Austria India People’s Republic of China

Wood Dale, IL Belgium Ireland Portugal

Carmel, IN Brazil Israel Poland

Columbia, MD Canada Italy Puerto Rico

Morrisville, NC Czech Republic Japan Spain

Parsippany, NJ Denmark Korea Sweden

Plymouth Meeting, PA Finland Malaysia Switzerland

Bellaire, TX France Mexico Taiwan

Germany Netherlands United Arab Emirates

United Kingdom

Item 3:

Legal Proceedings

From time to time, the Company and its subsidiaries are involved in various litigation matters arising in the ordinary course of business. The Company believes it has meritorious arguments in its current litigation matters and believes any outcome, either individually or in the aggregate, will not be material to the Company’s financial position or results of operations.

Item 4:

Mine Safety Disclosures

Not applicable.

Table of Contents

PART II

The Company’s common stock is registered under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and is listed on the New York Stock Exchange under the symbol “WAT”. As of February 19, 2022, the Company had 75 common stockholders of record. The Company has not declared or paid any dividends on its common stock in its past three fiscal years and does not intend to pay cash dividends in the foreseeable future. Any future determination to pay cash dividends will be made at the discretion of the Board of Directors and will depend on restrictions and other factors the Board of Directors may deem relevant. The Company has not made any sales of unregistered equity securities in the years ended December 31, 2021, 2020 or 2019.

Securities Authorized for Issuance under Equity Compensation Plans

Equity compensation plan information is incorporated by reference from Part III, Item 12, Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters, of this document and should be considered an integral part of this Item 5.

Table of Contents

Stock Price Performance Graph

WAT US Equity

WAT · 10-K · period ended 2021-12-31

Item 1:

Item 1A:

Item 1B:

Item 2:

Item 3:

Item 4:

WAT US Equity☆

WAT · 10-K · period ended 2021-12-31

Item 1:

Item 1A:

Item 1B:

Item 2:

Item 3:

Item 4:

WAT US Equity