RYZ US Equity☆

10-K

s

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2025

OR

For the transition period from to

Commission File No. 001-34735

RYERSON HOLDING CORPORATION

(Exact name of registrant as specified in its charter)

227 W. Monroe St.,27th Floor

Chicago, Illinois60606

(Address of principal executive offices)

(312) 292-5000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class Trading symbol(s) Name of each exchange on which registered

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐No☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days. Yes☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☐ Accelerated filer ☒

Non-accelerated filer ☐ Smaller reporting company ☐

Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. Yes ☐ No ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant, based on the closing price of a share of the registrant’s common stock on June 30, 2025 as reported by the New York Stock Exchange on such date was $585,167,390. As of February 18, 2026 there were 51,482,714 shares of our Common Stock, par value $0.01 per share, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

The information required to be furnished pursuant to Part III of this Form 10-K will be set forth in, and incorporated by reference from, the registrant’s definitive proxy statement for the annual meeting of stockholders (the “2026 Proxy Statement”), which will be filed with the Securities and Exchange Commission not later than 120 days after the end of the fiscal year ended December 31, 2025.

TABLE OF CONTENTS

Page

Special Note Regarding Forward-Looking Statements 3

PART I

Item 1. Business 4

Item 1A. Risk Factors 12

Item 1B. Unresolved Staff Comments 24

Item 1C. Cybersecurity 25

Item 2. Properties 26

Item 3. Legal Proceedings 28

Item 4. Mine Safety Disclosures 28

PART II

Item 6. Reserved 31

Item 7A. Quantitative and Qualitative Disclosures about Market Risk 48

Item 8. Financial Statements and Supplementary Data 49

Item 9A. Controls and Procedures 93

Item 9B. Other Information 93

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 93

PART III

Item 10. Directors, Executive Officers, and Corporate Governance 94

Item 11. Executive Compensation 94

Item 14. Principal Accounting Fees and Services 95

PART IV

Item 15. Exhibits and Financial Statement Schedules 96

2

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report contains “forward-looking statements.” Such statements can be identified by the use of forward-looking terminology such as “objectives,” “goals,” “preliminary,” “range,” “believes,” “expects,” “may,” “estimates,” “will,” “should,” “plans” or “anticipates” or the negative thereof or other variations thereon or comparable terminology, or by discussions of strategy. Readers are cautioned that any such forward-looking statements are not guarantees of future performance and may involve significant risks and uncertainties, and that actual results may vary materially from those anticipated or implied in the forward-looking statements as a result of various factors. Among the factors that significantly impact the metals distribution industry and our business are:

•

highly cyclical fluctuations resulting from, among others, seasonality, market uncertainty, and costs of goods sold;

•

remaining competitive and maintaining market share in the highly competitive and fragmented metals distribution industry;

•

managing the costs of purchased metals relative to the price at which we sell our products during periods of rapid price escalation or deflation;

•

the management of inventory and other costs and expenses;

•

customer, supplier, and competitor consolidation, bankruptcy, or insolvency;

•

the impairment of goodwill that could result from, among other things, volatility in the markets in which we operate;

•

the impact of geopolitical events;

•

future funding for postretirement employee benefits may require substantial payments from current cash flow;

•

the failure to effectively integrate newly acquired operations;

•

the regulatory and other operational risks associated with our operations located outside of the United States (“U.S.”);

•

the ability of management to focus on North American and foreign operations;

•

currency fluctuations in the U.S. dollar versus the Canadian dollar, the Chinese renminbi, the Mexican peso, and the Hong Kong dollar;

•

the adequacy of our efforts to mitigate cyber security risks and threats;

•

reduced production schedules, layoffs or work stoppages by our own, our suppliers’, or customers’ personnel;

•

certain employee retirement benefit plans are underfunded and the actual costs could exceed current estimates;

•

prolonged disruption of our processing centers;

•

the ability to retain and attract management and key personnel;

•

our risk management strategies may result in losses;

•

the incurrence of substantial costs or liabilities to comply with, or as a result of violations of, environmental laws;

•

the impact of new or pending litigation against us;

•

the risk of product liability claims;

•

our indebtedness and the covenants in instruments governing such indebtedness;

•

the ability to comply with the terms of our asset-based credit facility; and

•

the influence of a single investor group over our policies and procedures.

These risks and uncertainties could cause actual results to differ materially from those suggested by the forward-looking statements. Forward-looking statements should, therefore, be considered in light of various factors, including those set forth in this Annual Report under “Risk Factors” and the caption “Industry and Operating Trends” included in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and elsewhere in this Annual Report. Moreover, we caution you not to place undue reliance on these forward-looking statements, which speak only as of the date they were made. We do not undertake any obligation to revise or publicly release any revisions to these forward-looking statements to reflect events or circumstances after the date of this Annual Report or to reflect the occurrence of unanticipated events.

3

PART I

ITEM 1. BUSINESS.

Ryerson Holding Corporation (“Ryerson Holding”), a Delaware corporation, is the parent company of Joseph T. Ryerson & Son, Inc. (“JT Ryerson”), a Delaware corporation. As of December 31, 2025, affiliates of Platinum Equity, LLC (“Platinum”) own approximately 3,924,478 shares of our common stock, which is approximately 12.2% of our issued and outstanding common stock.

We are a leading value-added processor and distributor of industrial metals with operations in the United States ("U.S.") through JT Ryerson and other U.S. subsidiaries, in Canada through our indirect wholly-owned subsidiary Ryerson Canada, Inc., a Canadian corporation (“Ryerson Canada”), and in Mexico through our indirect wholly-owned subsidiary Ryerson Metals de Mexico, S. de R.L. de C.V., a Mexican corporation (“Ryerson Mexico”). In addition to our North American operations, we conduct metal processing and distribution operations in China through an indirect wholly-owned subsidiary, Ryerson China Limited, a Chinese limited liability company (“Ryerson China”). Unless the context indicates otherwise, Ryerson Holding, JT Ryerson, Ryerson Canada, Ryerson Mexico, and Ryerson China together with their subsidiaries, are collectively referred to herein as “Ryerson,” “we,” “us,” “our,” or the “Company.”

Our Company

We are one of the largest value-add processors and distributors of industrial metals in North America measured in terms of sales. As of December 31, 2025, we have approximately 4,300 employees across 103 facilities in North America and three facilities in China. Through this network we serve approximately 40,000 customers across a wide range of manufacturing end-markets. Our customers range from local, independently owned fabricators and machine shops to large, international original equipment manufacturers. We carry a full line of approximately 75,000 products in stainless steel, aluminum, carbon steel, and alloy steels and a limited line of nickel and red metals in various shapes and forms. In addition to our metals products, we offer numerous value-added processing and fabrication services, and nearly 80% of the products we sell are processed to meet customer requirements.

Our business strategy includes providing a superior level of customer service and responsiveness, technical services, and inventory management solutions while maintaining low operating costs in order to maximize financial results. Our growth strategy is based on increasing our operating results through organic growth activities and strategic acquisitions.

To that end, we continue to focus on our interconnected network, systems, and enhancing our value-added services and online presence to provide increased access, functionality, and flexibility to our customers. We are using advanced analytics to improve pricing and inventory utilization. Our service centers are strategically located near our customers, which permits us to quickly process and deliver our products and services, often the day after receiving an order. We own, lease, or contract a fleet of tractors and trailers, allowing us to efficiently meet our customers’ delivery demands. Our range of products together with our breadth of services allows us to service a diverse customer base and to create long-term partnerships with our customers and enhances our profitability.

We focus on strategic acquisitions that complement and enhance our product, customer, and geographic diversification. Ryerson’s M&A strategy includes both transformative turnaround acquisitions and value-add, bolt-on acquisitions. On October 28, 2025, Ryerson and Olympic Steel, Inc. ("Olympic Steel") jointly announced their definitive agreement to merge and on February 13, 2026, they announced the successful completion of the merger (the “Olympic Steel Merger”). Olympic Steel is a metals service center focused on the direct sale and value-added processing of carbon and coated sheet, plate, and coil products; stainless steel sheet, plate, bar, and coil; aluminum sheet, plate, and coil; pipe, tube, bar, valves and fittings, tin plate and metal-intensive end-use products. Olympic Steel provides metals processing and distribution services for a wide range of customers. The combination of the two companies enhances Ryerson's presence as North America's second largest metals service center, bringing Olympic Steel's complementary footprint, capabilities, and product offering into Ryerson's intelligently interconnected network of value-added service centers. Please refer to the Section titled “Olympic Steel Acquisition” of Item 7, Management’s Discussion and Analysis of Financial Conditions and Results of Operations,” and Note 19 — “Subsequent Events” of Part II, Item 8 “Financial Statements and Supplementary Data” for further information on the Olympic Steel Merger. In 2024 and 2023, Ryerson focused on bolt-on acquisitions. In 2024, we acquired Production Metals, LLC while in 2023, Ryerson's acquisitions included BLP Holdings, LLC, Norlen Incorporated, TSA Processing, and Hudson Tool Steel Corporation.

Industry Overview

Metals service centers serve as key intermediaries between metal producers and end users of metal products. They purchase in scale and sell in smaller quantities. End-users often look for “one-stop” suppliers that offer lower order volumes, shorter lead times, more reliable delivery, and processing services. Metal producers mainly sell metals in the form of standard-sized coils, sheets, plates,

4

structurals, bars, and tubes in large quantities, with longer lead times and limited inventory. Metal service centers serve as key intermediaries closing the gap between metal producers’ supply and end-users’ demand.

By aggregating end-users’ demand and purchasing metal in bulk to take advantage of economies of scale, metals service centers may purchase, process, and deliver metal to end‐users in a more efficient and cost‐effective manner than the end‐user may achieve by dealing directly with the primary producer. Further, specialized metals processing equipment is costly and requires high‐volume production to be cost effective, and many customers are not able or willing to invest in the necessary technology, equipment, and warehousing of inventory to efficiently and effectively perform metal processing for their own operations. Due to this, many customers have reduced their in-house processing capabilities, opting to source processed metal from service centers like us. This saves our customers time, labor, and expense, reducing their overall manufacturing costs. It also permits us to increasingly focus on value-added services and expansion of our mix of fabricated products, which typically sell at higher margins. We therefore invest in our processing equipment to grow this mix and our gross profit margin.

Our industry is highly fragmented with the largest companies accounting for only a small percentage of total market share. The majority of metals services companies have limited product lines and inventories and their customers are usually located within their local geographic area. In general, competition is based on quality, service, price, and geographic proximity. We primarily compete with other metals service centers and to a lesser extent with metal producers.

The metals service center industry typically experiences cash flow trends that are counter-cyclical to the revenue and volume growth of the industry. During an industry downturn, companies generally reduce working capital assets and generate cash as inventory and accounts receivable balances decline, and as a result, operating cash flow and liquidity tend to increase during a downturn.

Competitive Strengths

Leading Market Position in North America.

Based on sales, we are one of the largest service center companies for carbon, stainless steel, and aluminum in the North American market where we have a broad geographic presence with 103 facilities, as of December 31, 2025.

Our service centers are located near our customer locations, enabling us to timely deliver to customers across numerous geographic markets. Additionally, our widespread network of locations in the U.S., Canada, and Mexico helps us to utilize our expertise to efficiently serve customers with complex supply chain requirements across multiple manufacturing locations. We believe this is a key differentiator for customers who need a supplier that can reliably and consistently support them. Our ability to transfer inventory among our facilities better enables us to timely and profitably source and process specialized items at regional locations throughout our network than if we were required to maintain inventory of all products and specialized equipment at each location.

Broad Geographic Reach Across Attractive End Markets.

Our operations serve a diverse range of industries including commercial transportation, fabrication and welding, machinery and equipment, consumer products, heavy equipment, climate, power, and machine shop sectors. We believe this broad range of industries in which we sell our products and services reduces our risk related to a downturn in a specific industry. We believe that our ability to quickly adjust our offerings based on regional and industry specific trends creates stability while also providing the opportunity to access specific growth markets. We are focused on expanding our presence within growing, secular markets, including electric vehicles and renewable energy.

Established Platform for Organic and Acquisition Growth.

Our growth strategy is based on increasing our operating results through organic growth activities and strategic acquisitions that enhance our service, product, customer, and geographic diversification. Our strategies include investing in value-added processing capabilities, analytically targeting attractive customers and end markets with our supply chain optimization service model, industry consolidation through targeted M&A, and providing customers faster and easier solutions to their metal needs, which we believe will provide us with growth opportunities.

Given the highly fragmented nature of the metals service center industry, we believe there are numerous additional opportunities to acquire businesses and incorporate them into our existing infrastructure. When integrating acquired businesses into our operational model, we may draw on our large scale and geographic reach to improve operational and financial performance through greater purchasing power, improved expense and working capital management, increased access to additional end markets, and broadening product mix.

5

Extensive Breadth of Products and Services for Diverse Customer Base.

We believe our broad product mix and marketing approach provides customers with a “one-stop shop” solution few other metals service center companies are able to offer. We provide a broad range of processing and fabrication services to meet the needs of our approximately 40,000 customers and typically fulfill approximately 1,000,000 orders per year. We provide supply chain solutions, including just-in-time delivery and value-added processing, to many original equipment manufacturing customers.

For the year ended December 31, 2025, no single customer, including their subcontractors, accounted for more than 6% of our sales, and our top 10 customers, including their subcontractors accounted for approximately 15% of our sales.

Strong Relationships with Suppliers.

We are among the largest purchasers of metals in North America and have long-term relationships with many of our North American suppliers. We believe we are frequently one of the largest customers of our suppliers and that concentrating our orders among a core group of suppliers is effective for obtaining favorable pricing and service. We believe we have the opportunity to further leverage this strength through continued focus on price and volume using an analytics-driven approach to procurement. In addition, we view our strategic suppliers as supply chain partners. We focus on logistics, lead times, rolling schedules, and scrap return programs to drive value-based buying that is advantageous for us. Metals producers worldwide are consolidating, and large, geographically diversified customers, such as Ryerson, are desirable partners for these larger suppliers. Our relationships with suppliers often provide us with access to metals when supply is constrained. Through our knowledge of the global metals marketplace and capabilities of specific mills, we believe we have developed an advantageous global purchasing strategy.

Experienced Management Team with Deep Industry Knowledge.

Our senior management team has extensive industry and operational experience and has been instrumental in optimizing and implementing our strategy. Our senior management has an average of more than 30 years of experience in the metals or service center industries. Our Chief Executive Officer (“CEO”), Mr. Edward Lehner, who joined the Company in August 2012 as Chief Financial Officer (“CFO”) and became CEO in June 2015, has 34 years of experience, predominantly in the metals industry. Mr. Jim Claussen, Executive Vice President & CFO, who joined the Company in 2002 and became CFO in 2021 after holding various senior management and leadership positions at the Company, including President of Central Steel & Wire, LLC, has 31 years of industry experience.

Industry Outlook

After reporting expansionary factory activity in January and February of 2025, the Institute for Supply Management’s Purchasing Managers’ Index (“PMI”) reported contracting factory activity for the remainder of the year, with readings below the growth threshold of 50. Aside from the aforementioned expansionary factory activity reported in January and February of 2025, the PMI has reported monthly contracting factory activity for each month of the past 3-year period (2023-2025). This trend was broken with a January 2026 reading of 52.6, which is a stronger than expected reading, but may, according to Susan Spence, Chair of the ISM Manufacturing Business Survey Committee, reflect post-holiday reordering or pre-buying due to expected price increases amid ongoing tariff issues. The PMI measures the economic health of the manufacturing sector and is a composite index based on five indicators: new orders, inventory levels, production, supplier deliveries, and the employment environment. PMI readings can be a good indicator of industrial activity and general economic growth.

The Department of Commerce announced that real GDP decreased in the first quarter of 2025 by 0.5%, then increased by 3.8% and 4.4% (updated estimate) in the second and third quarters of the year, respectively. Fourth quarter 2025 data is not available at the time of release.

Products and Services

We carry a full line of carbon steel, stainless steel, alloy steels, and aluminum, and a limited line of nickel and red metals. These materials are stocked in a number of shapes, including coils, sheets, rounds, hexagons, square and flat bars, plates, structurals, and tubing.

We also provide a wide variety of processing services to meet our customers’ needs and nearly 80% of the metals products we sell are processed by us by bending, beveling, blanking, blasting, burning, cutting-to-length, drilling, flattening, forming, grinding, laser cutting, machining, notching, painting, polishing, punching, rolling, sawing, shearing, slitting, stamping, tapping, threading, welding, or other techniques to process materials to a specified thickness, length, width, shape, and surface quality pursuant to specific customer orders. Most of the products that we carry require expensive specialized equipment for material handling and processing. We

6

believe few of our customers have the capability to process metal into the desired sizes, forms, or finishes or they are unwilling to incur the significant capital expenditures to acquire the necessary equipment. We are growing and diversifying our product mix mainly as a result of our targeted growth strategy to provide increased levels of value-added processing services. We believe our enhanced processing capabilities will increase our ability to sell higher-margin metals processing services to a larger group of customers. We expect this, together with our focus on maintaining pricing discipline related to our processing services, will increase our gross profit margin.

We had capital expenditures of $437.4 million in the five-year period ended December 31, 2025. We invest in equipment to offer more value-added processing to our customers in an effort to increase our margins and profitability.

The following pie charts show our percentage of sales by major product line for 2025 and 2024:

We are not dependent on any particular customer group or industry because we process and distribute a variety of metals. This diversity of product type and material reduces our exposure to fluctuations or other weaknesses in the financial or economic stability of particular customers or industries. We are also less dependent on any particular suppliers as a result of our product diversification. See pie charts showing our sales by metal consuming industry within “Customers and Markets” discussion below.

Customers and Markets

Our customer base is diverse, numbering approximately 40,000, as of December 31, 2025, in a variety of industries, including commercial transportation, fabrication and welding, machinery and equipment, consumer products, heavy equipment, climate, power, and machine shop sectors. Although we sell directly to many large original equipment manufacturers, the majority of our sales are to smaller customers, including small machine shops and fabricators, in small quantities with frequent deliveries, helping them manage their working capital and credit needs more efficiently.

For the year ended December 31, 2025, no single customer, including their subcontractors, accounted for more than 6% of our sales, and ourtop 10 customers, including their subcontractors, accounted for approximately 15% of our sales. Substantially all of our sales are attributable to our U.S. operations and substantially all of our long-lived assets are located in the U.S.

7

During the year ended December 31, 2025, the Company conducted an extensive review of its customers end-market categories and updated them to gain a clearer and more accurate understanding of business performance. Because of this realignment, management can better identify growth opportunities, respond to evolving customer needs, and ensure strategic decisions are based on precise, relevant data. The update also allows management to target resources, track trends, and communicate with stakeholders more effectively. The following pie charts reflect the new categories and show the Company’s percentage of sales by metal consuming industry for 2025 and 2024:

Our customers are primarily located throughout the U.S., but we also have international customers. Our decentralized operating structure and facilities located near or close to most of our customers enable an efficient delivery system capable of handling a high frequency of short lead time orders. We transport our products directly to customers via our in-house and dedicated truck fleet, which further supports the just-in-time delivery requirements of our customers, and via third-party trucking firms.

We process our metals to specific customer orders as well as for stocking programs. Many of our larger customers commit to purchase on a regular basis at agreed upon or indexed prices for periods ranging from three to twelve months. To help mitigate price volatility risks, these price commitments are generally matched with corresponding supply arrangements, or to a lesser degree by commodity hedges. Customers notify us of specific release dates for processed products. Customers typically notify us of release dates anywhere from on a just-in-time basis to one month before the release date. Consequently, we are required to carry sufficient inventory to meet the short lead time and just-in-time delivery requirements of our customers.

We have international facilities located in Canada, Mexico, and China. Net sales of our international locations (based on where the shipments originated) accounted for 10.0% of our consolidated 2025 net sales, or $461.8 million. See Note 13 — “Segment information” of Part II, Item 8 “Financial Statements and Supplementary Data” for further information on U.S. and foreign revenues and assets.

Customer demand may change from time to time based on, among other things, general economic conditions and industry capacity. Many of the industries in which our customers compete are cyclical in nature. We believe that our various and diverse offerings, ways-to-market, and end markets reduce the volatility of our business in the aggregate, thus somewhat reducing earnings volatility. A portion of our customers experience seasonal slowdowns, see Seasonality discussion below.

8

Suppliers

We purchase the majority of our inventories from key domestic metals suppliers. Because of our total volume of purchases and our long‐term relationships with our suppliers, we believe that we are generally able to purchase inventory at the best prices offered by our suppliers.

For the year ended December 31, 2025, our top 25 suppliers, including their subcontractors, accounted for approximately 76% of our purchase dollars. We are generally able to meet our materials requirements because we use many suppliers, there is a substantial overlap of product offerings from these suppliers, and there are several other suppliers able to provide identical or similar products. While the metals producing supply base has experienced significant consolidation and supply interruptions in the past, we believe both our size and our long-term relationships with our suppliers has enabled us to meet our material requirements and will continue to allow us to do so in the future.

Seasonality

Seasonal factors cause demand fluctuations during the year. Depending on the severity of the fluctuations, our results of operations may be impacted. Our sales, as measured in tonnage sold, in the months of July, November, and December traditionally have been lower than in other months because of a reduced number of shipping days and holiday or vacation closures for some customers. Consequently, our sales in the first two quarters of the year are usually higher than in the third and fourth quarters. Results of any one or more quarters are therefore not necessarily indicative of annual results.

Sales and Marketing

We maintain our own professional sales force. In addition to our office sales staff, we market and sell our products through the use of our field sales force that we believe has extensive product and customer knowledge and offers a comprehensive catalog of our products. Our office and field sales staff, which together consist of approximately 850 employees, as of December 31, 2025, include technical personnel. Additionally, we offer our customers the ability to purchase our products through our e-commerce website.

Because much of our business is relationship-based, we operate under many different trade names. Businesses we acquire often have strong customer relationships and solid reputations, and we will often continue to use the acquired business name to maintain existing customer relationships.

Capital Expenditures

In 2025, we completed the expansion and modernization of our Shelbyville, KY non-ferrous processing center, and continued operationalization and optimization of assets across our North America service center network. We continued to invest in processing capabilities, value-add capex, and maintenance projects. Investments by us in property, plant, and equipment, together with asset retirements for the five years ended December 31, 2025, excluding the initial purchase price of acquisitions are set forth below. The net capital change during such period aggregated to an increase of $352.8 million.

Additions Retirementsor Sales Net

(In millions)

The net reduction in 2021 is related to sale lease-back transactions. We currently anticipate capital expenditures, excluding acquisitions, of up to approximately $50 million for 2026 with a focus on productivity enhancing projects and maintenance. We expect all of the 2026 capital expenditures to be funded using proceeds from the cash generated by operations. We will continue to evaluate and execute each growth project in light of the economic conditions and outlook at the time of investment and may significantly reduce our capital expenditures if economic conditions warrant a more conservative approach to capital allocation.

Environmental, Health, and Safety Matters

Our facilities and operations are subject to many federal, state, local, and foreign laws and regulations relating to the protection of the environment and to health and safety. In particular, our operations are subject to requirements relating to waste disposal, recycling, air and water emissions, the handling of regulated materials, remediation, underground storage tanks, asbestos-containing

9

building materials, workplace exposure, and other matters. We believe that our operations are currently in compliance with all such laws and do not presently anticipate substantial expenditures in the foreseeable future in order to meet environmental, workplace health or safety requirements, or to pay for any investigations, corrective action, or claims. However, claims, enforcement actions, or investigations regarding personal injury, property damage, or violation of environmental laws could result in substantial costs to us, divert our management’s attention, and result in significant liabilities, fines, or the suspension or interruption of our facilities.

We continue to analyze and implement safeguards to mitigate any environmental, health, and safety risks we may face. As a result, additional costs and liabilities may be incurred to comply with future requirements, such as the climate disclosure requirements passed by the state of California, or to address newly discovered conditions, and these costs and liabilities could have a material adverse effect on our results of operations, financial condition, or cash flows. While the costs of compliance could be significant, given the uncertain outcome and timing of future action by the U.S. federal government on this issue, we cannot accurately predict the full financial impact of current and future greenhouse gas regulations on our operations or our customers at this time. We do not currently anticipate any new programs disproportionately impacting us compared to our competitors.

Some of the properties currently or previously owned or leased by us are located in industrial areas or have a long history of heavy industrial use. We may incur environmental liabilities with respect to these properties in the future including costs of investigations, corrective action, claims for natural resource damages, claims by third parties relating to property damages, or claims relating to contamination at sites where we have sent waste for treatment or disposal. Based on currently available information we do not expect any investigation, remediation matters, or claims related to properties presently or formerly owned, operated, or to which we have sent waste for treatment or disposal would have a material adverse effect on our financial condition, results of operations, or cash flows.

In October 2011, the United States Environmental Protection Agency (the “EPA”) named JT Ryerson as one of more than 100 businesses that may be a potentially responsible party for the Portland Harbor Superfund Site. See Note 12: Commitments and Contingencies in the notes to the consolidated financial statements included in Part II, Item 8 of this Report on Form 10-K. As the EPA has not yet allocated responsibility for the contamination among the potentially responsible parties, including JT Ryerson, we do not currently have sufficient information available to us to determine whether the Record of Decision will be executed as currently stated, whether and to what extent JT Ryerson may be held responsible for any of the identified contamination, and how much (if any) of the final plan’s costs might ultimately be allocated to JT Ryerson. Therefore, management cannot predict the ultimate outcome of this matter or estimate a range of potential loss at this time.

There are various other claims and pending actions against the Company. The amount of liability, if any, for those claims and actions as of December 31, 2025 is not determinable but, in the opinion of management, such liability, if any, will not have a material adverse effect on the Company’s financial position, results of operations, or cash flows. We maintain liability insurance coverage to assist in protecting our assets from losses arising from or related to activities associated with business operations.

Our U.S. operations are also subject to the Department of Transportation Federal Motor Carrier Safety Regulations. We operate a private trucking motor fleet for making deliveries to some of our customers. Our drivers do not carry any material quantities of hazardous materials. Our foreign operations are subject to similar regulations. Future regulations could increase maintenance, replacement, and fuel costs for our fleet. These costs could have a material adverse effect on our results of operations, financial condition, or cash flows.

Intellectual Property

We own several U.S. and foreign trademarks, service marks, and copyrights. Certain of the trademarks are registered with the U.S. Patent and Trademark Office and, in certain circumstances, with the trademark offices of various foreign countries. We consider certain other information owned by us to be trade secrets. We protect our trade secrets by, among other things, entering into confidentiality agreements with our employees regarding such matters and implementing measures to restrict access to sensitive data and computer software source code on a need-to-know basis. We believe that these safeguards adequately protect our proprietary rights and we vigorously defend these rights. While we consider all our intellectual property rights as a whole to be important, we do not consider any single right to be essential to our operations as a whole.

Sustainability

In February 2026, Ryerson released its fourth Sustainability Report. This annual report provides an update on the Company's ongoing sustainability efforts, the investments being made in its people and service center network, and how it is serving its communities. In 2025, Ryerson's Sustainability Committee reviewed its focus initiatives, considering numerous sustainability topics and their importance to the success of our business and their impacts to all of our stakeholders within our current operating environment. As a result of this review, the 2025 edition introduces the following sustainability focus topics: corporate governance

10

and ethical leadership, environmental sustainability, workforce safety and well-being, talent management, responsible sourcing, supply chain transparency, and resiliency. Achievements highlighted in the 2025 report include Ryerson’s recognition by U.S. News & World Report as a great place to work, the new human capital management system implemented during the year, a case study on the resource efficient design of the Shelbyville, KY project, and Ryerson's continued role in the circular metals economy.

Additionally, the Sustainability Report includes important content on governance practices, including how we continuously monitor and analyze ourselves and our supply-chain relationships in order to operate with a high level of integrity and how we protect Company and stakeholder information through strong cybersecurity practices. We strive, and expect our suppliers, to comply with all applicable laws and regulations as well as Ryerson's Human Rights Policy, Conflict Minerals Policy, and Code of Ethics and Business Conduct.

Human Capital

In order to provide best-in-class customer experiences, it is crucial that we continue to attract and retain top talent. To facilitate talent attraction and retention, we strive to create an inclusive and safe workplace, open to all who are qualified, with opportunities for our employees to grow and develop in their careers, supported by strong compensation, benefits, and wellness programs, as well as initiatives that build connections between our employees and their communities.

Talent and Future Workforce.Our recruitment and talent management teams lead our mission to attract, retain, and develop talent. These teams are organized under our Talent Management Office ("TMO"), which includes our Chief Human Resources Officer, our Director of Talent Management, and other senior leaders. The TMO is responsible for our recruiting efforts, attracting the best talent, increasing opportunity, identifying hiring efficiencies, facilitating onboarding, and providing continuing education opportunities to engage employees as they join Ryerson and build their careers with us.

As part of retaining and developing talent, Ryerson offers employees competitive compensation, expanded benefits including a paid parental leave policy, career growth through its learning platform, mentorship and tuition reimbursement programs, and engagement through all-employee surveys conducted periodically.

Balanced and Bias-Free Employment Practices. Ryerson does not tolerate any discriminatory or illegal preferences and is in compliance with applicable state and federal anti-discrimination laws. Ryerson focuses on employee engagement, training, and community outreach efforts with the mission of promoting our corporate values and encouraging bias-free practices in all aspects of the business.

Employee Health, Wellness, and Safety. Safety, health, and wellness are fundamental expectations of our Board, executives, employees, and our customers. Our safety standards, which go beyond industry standards and legal requirements, have helped protect the well-being of our people and prevent workplace injuries. We strive for a zero-injury workplace by means of an Environmental, Health, and Safety policy that reinforces the goal. Our safety performance, measured as the number of OSHA recordable injuries per 200,000 labor hours, consistently outperforms the industry average as reported by the Bureau of Labor Statistics. In 2025, our OSHA rate was 2.46.

We provide our employees and their families with access to a variety of innovative, flexible, and convenient health and wellness programs, including benefits that provide protection and security so they can have peace of mind concerning events that may require time away from work or that impact their financial well-being; that support their physical and mental health by providing tools and resources to help them improve or maintain their health status, and encourage engagement in healthy behaviors; and that offer choice where possible so they can customize their benefits to meet their needs and the needs of their families.

Compensation and Benefits. We provide robust compensation and benefits programs to help meet the financial needs of our employees. In addition to salaries, we provide annual and quarterly sales incentive plans, healthcare and insurance benefits, health savings and flexible spending accounts, retirement savings contribution matching, paid time off, parental leave, employee assistance programs, and tuition assistance. Additionally, we have targeted equity-based grant programs with vesting conditions to facilitate retention of personnel, particularly those with critical skills and experience.

Employee Headcount and Unions. See Item 1A, Risks Related to Operating our Business, sub-section "Any significant work stoppages can harm our business", as well as Note 12: Commitments and Contingencies within Part II, Item 8 "Financial Statements and Supplementary Data" for further information.

11

Privacy and Data Protection

We collect, process, and store limited personal information from and about our employees, customers, and other third parties, primarily in the form of business contact information. We may therefore be subject to certain privacy and data protection laws and regulations in the jurisdictions in which we operate. In the United States, numerous federal and state laws and regulations govern the collection, use, disclosure, and protection of personal information, and may require notification to regulators and affected individuals in the event of a security breach affecting that personal information. Certain non-U.S. data protection laws, such as those in China, also restrict the use and cross-border transfer of certain personal information. Privacy and data protection laws, regulations, and other obligations are constantly evolving and may conflict with each other. Any violation of applicable data protection laws in the U.S. or elsewhere could result in legal liability, which may lead to significant civil and/or criminal penalties or otherwise adversely affect our business, operations, financial condition, or reputation.

Available Information

All periodic and current reports and other filings that we are required to file with the Securities and Exchange Commission (the "SEC"), including our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant Section 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge from the SEC’s website (www.sec.gov) or through our Investor Relations website at http://ir.ryerson.com. Such documents are available as soon as reasonably practicable after electronic filing of the material with the SEC. Copies of these reports (excluding exhibits) may also be obtained free of charge, upon written request to: Investor Relations, Ryerson Holding Corporation, 227 W. Monroe St., 27th Floor, Chicago, Illinois 60606.

The Company also posts its Code of Ethics on its website. See Part III, Item 10 for more information regarding our Code of Ethics.

Our website address is included in this report for informational purposes only. Our website and the information contained therein or connected thereto are not incorporated into this annual report on Form 10-K.

ITEM 1A. RISK FACTORS.

Our business faces many risks. You should carefully consider the risks and uncertainties described below, together with the other information in this report, including the consolidated financial statements and notes to the consolidated financial statements. We cannot assure you that any of the events discussed in the risk factors below will not occur. These risks could have a material and adverse impact on our business, results of operations, financial condition, and cash flows.

RISKS RELATED TO OUR INDUSTRY

Weakness in the economy, market trends, and other conditions affecting the profitability and financial stability of our customers has and could continue to negatively impact our sales growth and results of operations.

Economic and industry trends affect our business environments. We serve several metals-consuming industries in which the demand for our products and services is sensitive to the production activity, capital spending, and demand for products and services of our customers. Many of these customers operate in markets that are subject to highly cyclical fluctuations resulting from seasonality, market uncertainty, costs of goods sold, currency exchange rates, foreign competition, offshoring of production, oil and natural gas prices, geopolitical developments, and a variety of other factors beyond our control. Any of these factors have and could cause customers to idle or close facilities, delay purchases, reduce production levels, or experience reductions in the demand for their own products or services.

Any of these events could impair the ability of our customers to make full and timely payments or reduce the volume of products and services these customers purchase from us and could cause increased pressure on our selling prices and terms of sale. We do not expect the cyclical nature of our customer base to change and any downturn in our customers’ industries could reduce our revenues and profitability or a significant or prolonged slowdown in activity in the U.S., Canada, or any other major world economy, or a segment of any such economy, could negatively impact our sales growth and results of operations.

The metals services business is very competitive and increased competition has and could reduce our revenues and gross margins.

We face competition in all markets we serve, from metals producers that sell directly to certain customers or segments of the market, to other metal services companies. The metals services industry itself is highly fragmented and competitive. There are a few

12

large competitors, but most of the market is served by small local and regional competitors. Competition is based principally on price, service, quality, production capabilities, inventory availability, and timely delivery.

We are experiencing increased pressure from online businesses that compete with price transparency. We expect technological advancements and the increased use of e-commerce solutions within the industry to continue to evolve at a rapid pace. As a result, our ability to effectively compete requires us to respond and adapt to new industry trends and developments, and implement new technology and innovations that may result in unexpected costs or may take longer than expected.

To remain competitive, we must be willing and able to respond to market pressures timely. These pressures, and the implementation, timing, and results of our strategic pricing and other responses, could have a material effect on our sales and profitability. If we are unable to grow sales or reduce costs, among other actions, to wholly or partially offset the effect on profitability of our pricing actions, our results of operations and financial condition may be adversely affected.

Changing metals prices have a significant impact on our liquidity, net sales, gross margins, operating income, and net income.

The metals services industry as a whole is cyclical and pricing and availability of metal has been volatile in the past and could continue to be volatile due to numerous factors beyond our control, including, but not limited to, general domestic and international economic conditions, labor costs, sales levels, competition, levels of inventory held by other metals service centers, consolidation of metals producers, higher raw material costs for the producers of metals, import duties and tariffs, and currency exchange rates. This volatility can significantly affect the availability and cost of materials for us. Our ability to pass on increases in costs in a timely manner depends on market conditions and may result in lower gross margins. In addition, higher prices could impact demand for our products, resulting in lower sales volumes. Moreover, we maintain substantial inventories of metal to accommodate the short lead times and just-in-time delivery requirements of our customers. Accordingly, we purchase metals in an effort to maintain inventory at levels that we believe to be appropriate to satisfy the anticipated needs of our customers based upon historic buying practices, contracts with customers, and market conditions. Commitments for metal purchases are generally at prevailing market prices in effect at the time orders are placed or at the time of shipment. During periods of rising metal prices, we may be negatively impacted by delays between the time of increases in the cost of metals to us and increases in the prices that we charge for our products if we are unable to pass these increased costs on to our customers. In addition, when metal prices decline, this has resulted in lower selling prices for our products and, as we use existing inventory that we purchased at higher metal prices, lower gross profit margins. Declines in prices or reductions in sales volumes could adversely impact our ability to maintain our liquidity and to remain in compliance with certain financial covenants under our revolving credit facility, as amended (“the Ryerson Credit Facility”), as well as result in us incurring inventory or goodwill impairment charges. Changing metals prices have negatively impacted our liquidity, net sales, gross margins, operating income, and net income in recent years and could continue to do so it the future.

Unexpected product shortages could negatively impact customer relationships, resulting in an adverse impact on results of operations.

Disruptions could occur due to factors beyond our control, including economic downturns, political unrest, port slowdowns, trade issues, including increased export or import duties or trade restrictions, health crises, climate related disruptions, and other factors. Any of the aforementioned items could adversely affect a supplier’s ability to manufacture ordeliver products to us.

Any disruption resulting from these events could cause significant delays in shipments of products or difficulties in obtaining products, any of which may expose us to unanticipated liability or require us to change our business practices in a manner materially adverse to our business, results of operations, and financial condition. For our sources of lower cost products from Asia and other areas of the world, the effect of disruptions is typically increased due to the additional lead time required and distances involved. In addition, we have strategic relationships with a number of vendors. In the event we are unable to maintain those relations, there might be a loss of competitive pricing advantages which could, in turn, adversely affect results of operations.

Changes in customer or product mix could cause our gross margin percentage to decline.

From time to time, we experience changes in customer and product mix that affect gross margin. Changes in customer and product mix result primarily from business acquisitions, changes in customer demand, customer acquisitions, selling and marketing activities, and competition. If rapid growth with lower margin customers occurs, we will face pressure to maintain current gross margins, as these customers receive more discounted pricing due to their higher sales volume. There can be no assurance that we will be able to maintain historical gross margins in the future.

13

We may not be able to retain or expand our customer base if the North American manufacturing industry erodes through acquisition and merger or consolidation activity in our customers’ industries.

Our customer base primarily includes manufacturing and industrial firms. Some of our customers operate in industries that are undergoing consolidation through acquisition and merger activity and some customers have closed as they were unable to compete successfully with overseas competitors. Our facilities are predominately located in the U.S. and Canada. To the extent that our customers cease U.S. operations or relocate to regions in which we do not have a presence, we could lose their business. Acquirers of manufacturing and industrial firms may have suppliers of choice that do not include us, which could impact our customer base and market share.

Global metal overcapacity and imports of metal products into the United States have adversely affected, and may again adversely affect, United States metal prices, which could impact our sales and results of operations.

At times, global metal production capacity may exceed global consumption of metal products. Such excess capacity sometimes results in metal manufacturers in certain countries exporting steel at prices that are lower than prevailing domestic prices and sometimes at or below their cost of production. Excessive imports of metal into the U.S. have exerted and may exert in the future, downward pressure on U.S. steel prices which may negatively affect our results of operations.

Lead time and the cost of our products could increase if we were to lose one of our primary suppliers.

If, for any reason, our primary suppliers of aluminum, carbon steel, stainless steel, or other metals should curtail or discontinue their delivery of such metals in the quantities needed and at prices that are competitive, our business could suffer. The number of available suppliers could be reduced by factors such as industry consolidation and bankruptcies affecting steel and metal producers. For the year ended December 31, 2025, our top 25 suppliers represented approximately 76% of our purchases. We could be significantly and adversely affected if delivery were disrupted from a major supplier. If, in the future, we were unable to obtain sufficient amounts of the necessary metals at competitive prices and on a timely basis from our traditional suppliers, we may not be able to obtain such metals from alternative sources at competitive prices to meet our delivery schedules, which could have a material adverse effect on our sales and profitability.

RISKS RELATED TO MARKET AND ECONOMIC VOLATILITY

The volatility of the market could result in a material impairment of goodwill.

We evaluate goodwill annually on October 1 and whenever events or changes in circumstances indicate potential impairment. Events or changes in circumstances that could trigger an impairment review include significant underperformance relative to our historical or projected future operating results, significant changes in the manner or the use of our assets or the strategy for our overall business, and significant negative industry or economic trends. We test for impairment of goodwill by assessing various qualitative factors with respect to developments in our business and the overall economy and calculating the fair value of a reporting unit using a combination of an income approach based on discounted future cash flows and a market approach at the date of valuation, as necessary. Under the discounted cash flow method, the fair value of each reporting unit is estimated based on expected future economic benefits discounted to a present value at a rate of return commensurate with the risk associated with the investment considering both returns to equity and debt investors. Please refer to the Section titled “Critical Accounting Estimates - Goodwill,” of Item 7, “Management’s Discussion and Analysis of Financial Conditions and Results of Operations,” and Note 1 — “Summary of Accounting and Financial Policies” of Part II, Item 8 "Financial Statements and Supplementary Data" for further information.

Changes in inflation have and may continue to adversely affect financial performance.

Fluctuations in inflation could result in lower revenues, higher costs, and decreased margins, profits, and earnings. Rapid or significant inflation could increase the costs we incur to procure, process, package, and deliver our metal to customers and we may not be able to increase selling prices to customers at the same rate, resulting in decreased margins and operating profits. Prolonged periods of deflation could adversely affect the degree to which we are able to maintain or increase selling prices resulting in decreased

14

revenues, margins, and operating profits. Additionally, prolonged deflation could impact our availability on the Ryerson Credit Facility as the value of our accounts receivable and inventory decreases.

In addition, we rely on arrangements with third-party shipping and freight companies for the delivery of our products. Freight and shipping costs may increase due to inflation, and any such increases could adversely affect our margins unless we are able to increase selling prices at the same rate.

We monitor the risk that the principal markets in which we operate could experience increased inflationary conditions. The onset, duration, and severity of an inflationary period cannot be estimated with precision.

Poor investment performance or other factors could require us to make significant unplanned contributions to our pension plan and future funding for postretirement employee benefits other than pensions also may require substantial payments from current cash flow.

We provide defined benefit pension plans for certain eligible employees and retirees. The performance of the debt and equity markets affect the value of plan assets. A decline in the market value of plan assets may increase the funding requirements for these plans. The cost of providing pension benefits is also affected by other factors, including interest rates used to measure the required minimum funding levels, the rate of return on plan assets, discount rates used in determining future benefit obligations, future government regulation, and prior contributions to the plans. Significant unanticipated changes in any of these factors may have an adverse effect on our financial condition, results of operations, liquidity, and cash flows.

RISKS RELATED TO EXPANSION AND INTERNATIONAL OPERATIONS

We may not be able to successfully consummate and complete the integration of future acquisitions, and if we are unable to do so, it could disrupt operations and cause unanticipated increases in costs and/or decreases in revenues and results of operations.

We have grown through a combination of internal expansion, acquisitions, and joint ventures. We intend to continue to grow through acquisitions and mergers, but we may not be able to identify appropriate acquisition candidates, obtain financing on satisfactory terms, consummate acquisitions, or integrate acquired businesses effectively and profitably into our existing operations. Restrictions contained in the agreements governing the Ryerson Credit Facility, or our other existing or future debt may also inhibit our ability to make certain investments, including acquisitions, and participations in joint ventures.

Acquisitions, mergers, partnerships, joint ventures, and other business combination transactions, both foreign and domestic, involve various inherent risks, such as uncertainties in assessing value, strengths, weaknesses, liabilities, and potential profitability. There is also risk relating to our ability to achieve identified operating and financial synergies anticipated to result from the transactions. Additionally, problems could arise from the integration of acquired businesses, including unanticipated changes in the business or industry or general economic conditions that affect the assumptions underlying the acquisition. Our future success will depend on our ability to complete the integration of these future acquisitions successfully into our operations. Specifically, after any business combination, customers may choose to diversify their supply chains to reduce reliance on a single supplier for a portion of their metals needs. We may not be able to retain all of our and an acquisition’s customers, which may adversely affect our business and sales. Integrating acquisitions, particularly large acquisitions, requires us to enhance our operational and financial systems and employ additional qualified personnel, management, and financial resources, and may adversely affect our business by diverting management away from day-to-day operations. Further, failure to successfully integrate acquisitions may adversely affect our profitability by creating significant operating inefficiencies that could increase our operating expenses as a percentage of sales and reduce our operating income. In addition, we may not realize expected cost savings from acquisitions. Any one or more of these factors could cause us to not realize the benefits anticipated or have a negative impact on the fair value of the reporting units. Accordingly, goodwill and intangible assets recorded as a result of acquisitions could become impaired.

We may be unable to successfully integrate our and Olympic Steel’s businesses in order to realize the anticipated benefits of the Olympic Steel Merger or do so within the intended timeframe.

We will be required to devote significant management attention and resources to integrating the business practices and operations of Olympic Steel with our business. We may be unable to realize the planned synergies from the Olympic Steel Merger or other benefits in the timeframe that we expect or at all. We continue to assess synergies that we may realize as a combined company, the realization of which will depend on a number of factors.

The success of the Olympic Steel Merger, including anticipated synergies, benefits, and cost savings, will depend, in part, on our ability to successfully combine and integrate our current operations with Olympic Steel’s business. If we experience difficulties with the integration process or other unforeseen costs, the anticipated benefits and cost savings of the Olympic Steel Merger may not be realized fully or at all, or may take longer to realize than expected. The integration planning and implementation process will result in significant costs and divert management attention and resources. These integration matters could have an adverse effect on our

15

combined company for an undetermined period after completion of the Olympic Steel Merger. In addition, the actual benefits of the Olympic Steel Merger could be less than anticipated, or otherwise offset by other factors.

Additional difficulties we may encounter as part of the integration process include the following:

•

the costs of integration and compliance and the possibility that the full benefits anticipated to result from the Olympic Steel Merger will not be realized;

•

any delay in the integration of management teams, strategies, operations, products, product candidates, and services;

•

diversion of the attention of each company’s management as a result of the Olympic Steel Merger;

•

differences in business backgrounds, corporate cultures, and management philosophies that may delay successful integration;

•

the ability to retain key employees;

•

the ability to create and enforce uniform standards, controls, procedures, policies, and information systems;

•

the challenge of integrating complex systems, technology, networks, and other assets of Olympic Steel into ours in a seamless manner that minimizes any adverse impact on customers, suppliers, employees, and other constituencies;

•

potential unknown liabilities and unforeseen increased expenses or delays associated with the Olympic Steel Merger, including costs to integrate Olympic Steel beyond current estimates; and

•

the disruption of, or the loss of momentum in, each company’s ongoing businesses or inconsistencies in standards, controls, procedures, and policies.

Any of these factors could adversely affect each company’s ability to maintain relationships with customers, suppliers, employees, and other constituencies or our ability to achieve the anticipated benefits of the Olympic Steel Merger or could reduce each company’s earnings or otherwise adversely affect our business and financial results. These risks are not limited to the Olympic Steel Merger and could also apply to our future acquisitions.

Certain of our operations are located outside of the United States, which subjects us to risks associated with international activities.

We have certain operations which are located outside of the U.S., in Canada, China, and Mexico. We are subject to the Foreign Corrupt Practices Act (“FCPA”), which generally prohibits U.S. companies and their intermediaries from making corrupt payments or otherwise corruptly giving anything of value to foreign officials for the purpose of obtaining or keeping business or otherwise obtaining favorable treatment, and requires companies to maintain adequate record-keeping and internal accounting practices. The FCPA applies to covered companies, individual directors, officers, employees, and agents. Under the FCPA, U.S. companies may be held liable for some actions taken by strategic or local partners or representatives. If we or our intermediaries fail to comply with the requirements of the FCPA, governmental authorities in the U.S. could seek to impose civil and/or criminal penalties.

We may be adversely affected by currency fluctuations in the U.S. dollar versus the Canadian dollar, the Chinese renminbi, the Hong Kong dollar, and the Mexican peso.

We have significant operations in Canada which incur the majority of their metal supply costs in U.S. dollars but earn the majority of their sales in Canadian dollars. Additionally, we have significant assets in China and conduct operations in Mexico. We have from time to time experienced losses when the value of the U.S. dollar strengthens against the Canadian dollar, the Chinese renminbi, the Hong Kong dollar, or the Mexican peso, which has caused adverse effects on our results of operations in the past and could occur again. In addition, we are subject to translation risk when we consolidate our Canadian, Chinese, and Mexican subsidiaries’ net assets into our balance sheet. Fluctuations in the value of the U.S. dollar versus the Canadian dollar, Chinese renminbi, the Hong Kong dollar, or the Mexican peso has in the past reduced the value of these assets as reported in our financial statements, which as a result, reduced our stockholders’ equity in the past and this could occur again in the future.

The Chinese government exerts substantial influence over the manner in which we must conduct our business activities, particularly with regards to the land our facilities are located on.

The Chinese government has exercised and continues to exercise substantial control over the Chinese economy through regulation and state ownership. Our ability to operate in China may be harmed by changes in its laws and regulations, including those relating to taxation, import and export tariffs, environmental regulations, land use rights, property, and other matters. We believe that our operations in China are in material compliance with all applicable legal and regulatory requirements. However, the central or local governments of the jurisdictions in which we operate may impose new, stricter regulations or interpretations of existing regulations that would require additional expenditures and efforts on our part to ensure our compliance with such regulations or interpretations.

16

Moreover, the Chinese court system does not provide the same property and contract right guarantees as do courts in the U.S. and, accordingly, disputes may be protracted and resolution of claims may result in significant economic loss.

Additionally, there is no private ownership of land in China and all land ownership is held by the government of China, its agencies, and collectives, which issue land use rights that are generally renewable. We lease the land where our Chinese facilities are located from the Chinese government. During 2025, the Chinese government terminated one of our land use rights agreements resulting in impairment of assets and disruptions to our business, the impact of which was not significant to the consolidated financial statements. The Chinese government could at any point terminate any of the other land use rights that we have and the impact could be significant in the future.

RISKS RELATED TO CYBERSECURITY AND INFORMATION TECHNOLOGY

Damage to our information technology infrastructure could harm our business.

The unavailability of any of our computer-based systems for any significant period of time could have a material adverse effect on our operations. In particular, our ability to manage inventory levels successfully largely depends on the efficient operation of our computer hardware and software systems. We use management information systems to track inventory information at individual facilities, provide pricing recommendations for sales quotes, communicate customer information, enter and track orders, operate processing equipment, and aggregate daily sales, margin, and promotional information. Difficulties associated with maintaining legacy systems, upgrades, installations of major software or hardware, and integration with new systems could have a material adverse effect on results of operations. The personnel and financial resources we commit to maintaining and upgrading our information systems may not be sufficient to address all potential issues, and we could be required to expend substantially more resources than anticipated to upgrade our information systems or integrate them with the systems of companies we have acquired. The upgrade or integration of these systems may disrupt our business or lead to operating inefficiencies. In addition, these systems are vulnerable to, among other things, damage or interruption from fire, flood, tornado, and other natural disasters, power loss, computer system and network failures, failure of telecommunications or other critical infrastructure, operator negligence, physical and electronic loss of data, or security breaches and computer viruses.

We are subject to cybersecurity risks and other vulnerabilities that could arise with the sophistication and heightened use of artificial intelligence and may incur increasing costs in an effort to minimize those risks.

We depend on the proper functioning and availability of our information technology platform, including our communications and data processing systems and those of third parties, in operating our business. These systems include software programs that are integral to the efficient operation of our business. We have established security measures, controls, and procedures, including recovery procedures for critical systems and business functions, to safeguard our information technology systems and to prevent unauthorized access to such systems and any data processed or stored in such systems, and we periodically evaluate and test the adequacy of such systems, measures, controls, and procedures; however, there can be no guarantee that such systems, measures, controls, and procedures will be effective. Security breaches could expose us to a risk of loss or misuse of our sensitive or proprietary information, litigation, and potential liability. In addition, cyber incidents that impact the availability, reliability, speed, accuracy, or other proper functioning of these systems could have a significant impact on our operations, and potentially on our results. We may not have the resources or technical sophistication to anticipate or prevent rapidly evolving and sophisticated cyberattacks, including through the use of artificial intelligence. A significant cyber incident, including system failure, security breach, disruption by malware, or other damage could interrupt or delay our operations, result in a violation of applicable privacy and other laws, damage our reputation, cause a loss of customers, or give rise to monetary fines and other penalties, which could be significant. Refer to Item 1C: "Cybersecurity" for further information on our Cybersecurity processes, policies, and programs.

The use or anticipated use of artificial intelligence technologies by us or third parties may increase operational risks or create new or unanticipated operational risks.

Artificial intelligence (“AI”) technologies offer numerous potential benefits, such as creating or increasing operational efficiencies, and we expect the use of AI by us, third parties on our behalf, and other market actors, including our competitors, to increase. However, the deployment of such technologies also poses certain risks, including that they may be misused, or the models or datasets on which those models are trained may be flawed or otherwise may function in an unexpected manner. The speed at which the technology is being adopted, and the uncertainty regarding the scope and details of laws, regulations, or standards governing its use, combined with the growing interest by various legislatures and regulators to address the development and deployment of AI technologies in a manner which may not be consistent across jurisdictions, increases these risks. Any misuse of or flaws in the AI tools we adopt, or regulatory inconsistency in how such tools may be used could adversely impact operations, expose us to legal liability, or cause reputational harm. Our competitors may also adopt AI more effectively or efficiently than we do, which could cause competitive harm or otherwise adversely impact or market position.

17

RISKS RELATED TO OPERATING OUR BUSINESS

Any significant work stoppages can harm our business.

As of December 31, 2025, we employed approximately 4,100 persons in North America and 200 persons in China. Our North American workforce was comprised of approximately 1,700 office employees and approximately 2,400 plant employees. Seventeen percent of our plant employees were members of various unions, including the United Steel Workers and The International Brotherhood of Teamsters, as of December 31, 2025.

Five renewal contracts covering 145 employees were successfully negotiated in 2025. Eight contracts covering 162 employees are currently scheduled to expire in 2026.

Certain employee retirement benefit plans are underfunded and the actual cost of those benefits could exceed current estimates, which would require us to fund the shortfall.

As of December 31, 2025, our pension plans had an unfunded liability of $33.1 million and our other postretirement benefits plans had an unfunded liability of $30.7 million. Our actual costs for benefits required to be paid may exceed those projected and future actuarial assessments. Under those circumstances, the adjustments required to be made to our recorded liability for these benefits could have a material adverse effect on our results of operations and financial condition and cash payments to fund these plans could have a material adverse effect on our cash flows. We may be required to make substantial future contributions to improve the plan’s funded status.

Any prolonged disruption of our processing centers could harm our business.

We have dedicated processing centers that permit us to produce standardized products in large volumes while maintaining low operating costs. We may suffer prolonged disruption in the operations of any of these facilities, whether due to labor or technical difficulties, destruction, or damage sustained as a result of natural disasters or climate-related events, which could adversely affect our operating results.

If we are unable to retain, attract, and motivate management and key personnel, it may adversely affect our business.

In order to compete and have continued growth, we must attract, retain, and motivate executives and other key employees, including those in managerial, technical, sales, marketing, and support positions. We believe that our success is due, in part, to our experienced management team. Losing the services of one or more members of our management team such as our CEO, Edward J. Lehner, could adversely affect our business and possibly prevent us from improving our operational, financial, and information management systems and controls. We compete to hire employees and then must train them and develop their skills and competencies. In the future, we may need to retain and hire additional qualified sales, marketing, administrative, operating, and technical personnel, and to train and manage new personnel. Our ability to implement our business plan is dependent on our ability to retain, hire, and train a large number of qualified employees each year. Our results of operations could be adversely affected by increased costs due to increased competition for employees, higher employee turnover, or increased employee benefit costs.

Our risk management strategies may result in losses.

From time to time, we may use fixed-price and/or fixed-volume supplier contracts to offset contracts with customers. Some of our existing supply agreements have required minimum purchase quantities. Under adverse economic conditions, those minimums may exceed our needs. Absent exceptions for force majeure and other circumstances affecting the legal enforceability of the agreements, these minimum purchase requirements may compel us to purchase quantities of raw materials that could significantly exceed our anticipated needs or pay damages to the supplier for shortfalls. In these circumstances, we would attempt to negotiate agreements for new purchase quantities. There is a risk, however, that we would not be successful in reducing purchase quantities, either through negotiation or litigation. If that occurred, we would likely be required to purchase more of a particular raw material in a particular year than we need, negatively affecting our results of operations and cash flows.

Additionally, on an as needed basis we use commodity contracts, foreign exchange contracts, and interest rate swaps to manage our exposure to commodity price risk, foreign currency exchange risk, and interest rate risk. These risk management strategies pose certain risks, including the risk that losses on a hedge position may exceed the amount invested in such instruments. Moreover, a party in a hedging transaction may be unavailable or unwilling to settle our obligations, which could cause us to suffer corresponding losses. A hedging instrument may not be effective in eliminating all of the risks inherent in any particular position. Our profitability may be adversely affected during any period as a result of the use of such instruments.

18

RISKS RELATED TO REGULATORY AND LEGAL MATTERS

We could incur substantial costs related to environmental, health, and safety laws.

Our operations are subject to increasingly stringent environmental, health, and safety laws. These include laws that impose limitations on the discharge of pollutants into the air and water and establish standards for the treatment, storage, and disposal of regulated materials, and the investigation and remediation of contaminated soil, surface water, and groundwater. Failure to maintain or achieve compliance with these laws or with the permits required for our operations could result in substantial increases in operating costs and capital expenditures. In addition, we may be subject to fines and civil or criminal sanctions, third party claims for property damage or personal injury, worker’s compensation or personal injury claims, cleanup costs, or temporary or permanent discontinuance of operations. Certain of our facilities are located in industrial areas, have a history of heavy industrial use, and have been in operation for many years and, over time, we and other predecessor operators of these facilities have generated, used, handled, and disposed of hazardous and other regulated wastes. Environmental liabilities could exist, including cleanup obligations at these facilities or at off-site locations where materials from our operations were disposed of, which could result in future expenditures that cannot be currently quantified and which could have a material adverse effect on our financial position, results of operations, or cash flows. Such liabilities may be imposed without regard to fault or the legality of a party’s conduct and may, in certain circumstances, be joint and several. Future changes to environmental, health, and safety laws, including those related to climate change, could result in material liabilities and costs, constrain operations, or make operations more costly for us, our suppliers, and our customers.

In October 2011, the United States Environmental Protection Agency (the “EPA”) named JT Ryerson as one of more than 100 businesses that may be a potentially responsible party for the Portland Harbor Superfund Site. See Note 12: Commitments and Contingencies in the notes to the consolidated financial statements included in Part II, Item 8 of this Report on Form 10-K. As the EPA has not yet allocated responsibility for the contamination among the potentially responsible parties, including JT Ryerson, we do not currently have sufficient information available to us to determine whether the Record of Decision will be executed as currently stated, whether and to what extent JT Ryerson may be held responsible for any of the identified contamination, and how much (if any) of the final plan’s costs might ultimately be allocated to JT Ryerson. Therefore, management cannot predict the ultimate outcome of this matter or estimate a range of potential loss at this time.

Environmental, social, and governance matters, and any related reporting obligation may impact our business.

Our business is subject to evolving corporate governance and public disclosure regulations and expectations, including with respect to environmental, social, and governance matters ("ESG"), that could expose us to numerous risks. These rules and regulations may continue to change as state-level climate laws evolve. Our adherence to these rules and regulations will require additional resources and the implementation of new reporting processes, all entailing additional compliance risk. Moreover, the progress and disclosure of our initiatives within the ESG scope could be criticized for accuracy, adequacy, and completeness, or may not advance at a sufficient pace. If our ESG-related data, processes, and reporting are incomplete or inaccurate, or if we fail to achieve progress with respect to our sustainability goals, or at all, our reputation, business, financial performance, and growth could be adversely affected.

More broadly, stakeholders have expressed increasing interest in ESG practices and reporting. These stakeholders include, state and foreign governmental authorities, investors and customers, and their focus includes safety, workplace culture, and environmental sustainability matters, such as carbon emissions. An example of increasing customer interest relates to the European Carbon Boarder Adjustment Mechanism (“CBAM”), a regulation that applies to a number of our large, international customers for whom we must provide upstream emissions details. Legislative, regulatory, or other efforts to combat climate change or other environmental concerns could result in future increases in taxes, restrictions on or increases in the costs of supplies, transportation, and utilities, any of which could increase our operating costs and/or necessitate future investments in facilities and equipment. Further, the customers we serve may impose emissions reduction or other environmental standards and requirements. As a result, we may experience increased compliance burdens and costs as well as increased pressure to make commitments, set targets, or establish additional goals and take actions to meet them, which could expose us to market, operational, execution, and reputation costs or risks.

Tax changes could affect our effective tax rate, the value of our deferred tax assets, and future profitability.

Our future results could be adversely affected by changes in the effective tax rate or changes in the treatment of deferred tax assets as a result of changes in Ryerson’s overall profitability, changes in the mix of earnings in countries with differing statutory tax rates, changes in tax legislation, the results of the examination of previously filed tax returns, and continuing assessment of the Company’s tax exposures. In particular, although the passage of the Tax Cut and Jobs Act of 2017 reduced the U.S. tax rate to 21%, our future earnings could be negatively impacted by changes in tax legislation including changing tax rates and tax base such as limiting, phasing-out, or eliminating deductions or tax credits, changing rules for earnings repatriations, and changing other tax laws in the U.S. or other countries.

19

We are subject to litigation that could strain our resources and distract management.

From time to time, we are involved in a variety of claims, lawsuits, and other disputes arising in the ordinary course of business. These suits concern issues including product liability, contract disputes, employee-related matters, and personal injury matters. It is not feasible to predict the outcome of all pending suits and claims, and the ultimate resolution of these matters as well as future lawsuits that could have a material adverse effect on our business, financial condition, results of operations, cash flows, or reputation.

We may face product liability claims that are costly and create adverse publicity.

If any of the products that we sell cause harm to any of our customers, we could be exposed to product liability lawsuits. If we were found liable under product liability claims, we could be required to pay substantial monetary damages. Further, even if we successfully defended ourselves against this type of claim, we could be forced to spend a substantial amount of money in litigation expenses, our management could be required to spend valuable time in the defense against these claims, and our reputation could suffer.

RISKS RELATED TO OWNERSHIP OF OUR COMMON STOCK

Our stock price has fluctuated in the past, has recently been volatile, and may be volatile in the future, and as a result, investors in our common stock could incur substantial losses.

We may incur rapid and substantial decreases in our stock price in the foreseeable future that are unrelated to our operating performance or prospects.

As a result of this volatility, investors may experience losses on their investment in our common stock. The market price for our common stock has been influenced by a variety of factors in the past and may continue to be influenced by any number of factors, including the following:

•

investor reaction to our business strategy;

•

the success of competitive products or technologies;

•

any developments with respect to our pursuit of strategic alternatives, including a potential sale or merger of the Company, sale of part of the Company, strategic minority investment, or licensing and other transactions;

•

changes in regulatory or industry standards applicable to our products;

•

variations in our financial and operating results or those of companies that are perceived to be similar to us;

•

developments concerning our collaborations or partners;

•

developments or disputes with any third parties that supply, manufacture, sell, or market any of our products;

•

actual or perceived defects in any of our products, if commercialized, and any related product liability claims;

•

our ability or inability to raise additional capital and the terms on which we raise it;

•

declines in the market prices of stocks generally;

•

trading volume of our common stock;

•

sales of our common stock by us or our stockholders;

•

announcement of or closing of significant acquisitions or mergers;

•

general economic, industry, and market conditions; and

•

other events or factors, including those resulting from such events, or the prospect of such events, including war, terrorism, and other international conflicts, public health issues including health epidemics or pandemics, and natural disasters such as fire, hurricanes, earthquakes, tornadoes, or other adverse weather and climate conditions, whether occurring in the U.S. or elsewhere, could disrupt our operations, disrupt the operations of our suppliers, or result in political or economic instability.

In the past, following periods of volatility in the market, securities class-action litigation has often been instituted against companies. Such litigation, if instituted against us, could result in substantial costs and diversion of management's attention and resources, which could materially and adversely affect our business, financial condition, results of operations, and growth prospects.

20

There can be no guarantee that our stock price will remain at current levels or that future sales of our common stock will not be at prices lower than those sold to investors.

We paid cash dividends on our common stock in each quarter of 2025, but any future dividend payments are at the discretion of our Board of Directors.

Since the third quarter of 2021, we have paid regular quarterly cash dividends on our common stock. Any declaration and payment of cash dividends on our common stock in the future, whether at current levels or at all, will be at the discretion of our Board of Directors and will depend upon our results of operations, earnings, capital requirements, financial condition, future prospects, contractual restrictions, and other factors deemed relevant by our Board of Directors. Therefore, you should not rely on dividend income from shares of our common stock. For more information, see "Dividend Policy" of Part II, Item 5 "Market for Registrant's Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities". Your only opportunity to achieve a return on your investment in us may be if the market price of our common stock appreciates and you sell your shares at a profit, but there is no guarantee that the market price for our common stock will ever exceed the price that you pay for our common stock.

Our corporate documents and Delaware law contain provisions that could discourage, delay, or prevent a change in control of the Company.

Our amended and restated certificate of incorporation and amended and restated bylaws contain provisions that may make the acquisition of our company more difficult without the approval of our Board of Directors. These provisions:

•

establish a classified Board of Directors so that not all members of our Board of Directors are elected at one time;

•

authorize the issuance of undesignated preferred stock, the terms of which may be established and the shares of which may be issued without stockholder approval, and which may include super voting, special approval, dividend, or other rights or preferences superior to the rights of the holders of common stock;

•

provide that the Board of Directors is expressly authorized to make, alter, or repeal our amended and restated bylaws;

•

prohibit stockholders from acting by written consent when less than a majority of the voting power of our outstanding stock is controlled by Platinum; and

•

establish advance notice requirements for nominations for elections to our Board of Directors or for proposing matters that can be acted upon by stockholders at stockholder meetings.

These anti-takeover provisions and other provisions under Delaware law could discourage, delay, or prevent a transaction involving a change in control of our company, even if doing so would benefit our stockholders. These provisions could also discourage proxy contests and make it more difficult for our stockholders to elect directors of their choosing.

Any issuance of preferred stock could make it difficult for another company to acquire us or could otherwise adversely affect holders of our common stock, which could depress the price of our common stock.

Our Board of Directors has the authority to issue preferred stock and to determine the preferences, limitations, and relative rights of shares of preferred stock and to fix the number of shares constituting any series and the designation of such series, without any further vote or action by our stockholders. Our preferred stock could be issued with voting, liquidation, dividend, and other rights superior to the rights of our common stock. The potential issuance of preferred stock may delay or prevent a change in control of us, discouraging bids for our common stock at a premium over the market price, and adversely affect the market price and the voting and other rights of the holders of our common stock.

21

RISKS RELATED TO OUR CAPITAL STRUCTURE

We have indebtedness under our Ryerson Credit Facility, which could adversely affect our financial position and prevent us from fulfilling our financial obligations.

As of December 31, 2025, our total indebtedness under the Ryerson Credit Facility was $463.2 million and we had $428 million of unused capacity on the facility. Our indebtedness may:

•

make it difficult for us to satisfy our financial obligations, including making scheduled principal and interest payments on our indebtedness;

•

limit our ability to borrow additional funds for working capital, capital expenditures, acquisitions, or other general corporate purposes;

•

limit our ability to use our cash flow for future working capital, capital expenditures, acquisitions, mergers, or other general corporate purposes;

•

require us to use a substantial portion of our cash flow from operations to make debt service payments;

•

limit our flexibility to plan for, or react to, changes in our business and industry;

•

place us at a competitive disadvantage compared to our less leveraged competitors; and

•

increase our vulnerability to the impact of adverse economic and industry conditions.

We may also incur additional indebtedness in the future. The terms of the Ryerson Credit Facility restrict but do not prohibit us from doing so, and the indebtedness incurred in compliance with these restrictions could be substantial. If new indebtedness is added to our current debt levels, the related risks that we now face could intensify.

The covenants in the Ryerson Credit Facility and covenants contained in agreements governing indebtedness that we incur in the future may impose restrictions that may limit our operating and financial flexibility.

The Ryerson Credit Facility contains a number of significant restrictions and covenants that limit our ability and the ability of our restricted subsidiaries, including JT Ryerson, to:

•

incur additional debt;

•

make certain investments or other restricted payments;

•

create liens or use assets as security in other transactions;

•

merge, consolidate, transfer, or dispose of substantially all of our assets; and

•

engage in transactions with affiliates.

The terms of the Ryerson Credit Facility require that, in the event availability under the facility declines to a certain level, we maintain a minimum fixed charge coverage ratio at the end of each fiscal quarter. Total credit availability is limited by the amount of eligible accounts receivable, inventory, and qualified cash pledged as collateral under the agreement insofar as the Company is subject to a borrowing base comprised of the aggregate of these three amounts, less applicable reserves. As of December 31, 2025, total credit availability under the Ryerson Credit Facility was $428 million. See discussion regarding the Ryerson Credit Facility in Note 9: “Debt” and Note 19: "Subsequent Events" of Part II, Item 8 “Financial Statements and Supplementary Data” as well as the discussion within the “Liquidity and Capital Resources” section of Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Our future indebtedness may contain covenants more restrictive in certain respects than the restrictions contained in the Ryerson Credit Facility. Operating results below current levels or other adverse factors, including a significant increase in interest rates, could result in our being unable to comply with financial covenants that are contained in the Ryerson Credit Facility or that may be contained in any future indebtedness. In addition, complying with these covenants may also cause us to take actions that are not favorable to our stockholders and may make it more difficult for us to successfully execute our business strategy and compete against companies that are not subject to such restrictions.

22

We may not be able to generate sufficient cash to service all of our indebtedness.

Our ability to make payments on our indebtedness depends on our ability to generate cash in the future. Balances outstanding on the Ryerson Credit Facility and our other outstanding indebtedness are expected to account for significant cash interest expenses. Accordingly, we will have to generate significant cash flows from operations to meet our debt service requirements. If we do not generate sufficient cash flow to meet our debt service and working capital requirements, we may be required to sell assets, seek additional capital, reduce capital expenditures, restructure or refinance all or a portion of our existing indebtedness, or seek additional financing. Moreover, insufficient cash flow may make it more difficult for us to obtain financing on terms that are acceptable to us, or at all.

Because all of our indebtedness bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, we are vulnerable to interest rate increases.

All of our indebtedness, including the Ryerson Credit Facility, bears interest at rates that fluctuate with changes in certain short-term prevailing interest rates. As of December 31, 2025, we had $463.2 million of outstanding borrowings under the Ryerson Credit Facility, with an additional $428 million available for borrowing under such facility. Assuming a consistent level of debt through-out 2025 a 100 basis point increase in the interest rate on our floating rate debt effective from the beginning of the year would increase our interest expense under the Ryerson Credit Facility by approximately $6.1 million, on an annual basis. The Federal Reserve decreased rates in 2025 and is expected to continue to decrease rates in 2026. Due to the rate cuts implemented, the interest rate on the Ryerson Credit Facility has decreased throughout 2025. If interest rates rise in the future, we could be unable to service our debt, which could have a material adverse effect on our business, financial condition, results of operations, or cash flows.

Changes in our credit ratings and outlook may reduce access to capital and increase borrowing costs.

Our credit ratings are based on a number of factors, including our financial strength and factors outside of our control, such as conditions affecting our industry generally or the introduction of new rating practices and methodologies. Our credit rating remained unchanged throughout 2025. We cannot provide assurances that our current credit ratings will remain in effect or that the ratings will not be lowered, suspended, or withdrawn entirely by the rating agencies. If rating agencies lower, suspend, or withdraw the ratings, the market price or marketability of our securities may be adversely affected. In addition, any negative change in ratings could make it more difficult for us to raise capital on acceptable terms, impact our ability to obtain adequate financing, and result in higher interest costs for our existing credit facilities, including the Ryerson Credit Facility, or on future financings.

RISKS RELATED TO OUR STOCKHOLDER BASE

Platinum owns a substantial percentage of our stock and, as of December 31, 2025, has the right to nominate one member of the Corporation’s board and will be able to exert influence over matters subject to stockholder approval.

As of December 31, 2025, Platinum owns approximately 3,924,478 shares of our common stock, which is approximately 12.2% of our issued and outstanding common stock. Therefore, Platinum may be able to influence all matters requiring stockholder approval. For example, Platinum may be able to influence elections of directors, amendments of our organizational documents, or approval of any merger, sale of assets, or other major corporate transaction. This may prevent or discourage unsolicited acquisition proposals or offers for our common stock that our stockholders may believe are in their best interest as stockholders.

The Company is party to an investor rights agreement (the “Investor Rights Agreement”) with certain affiliates of Platinum which provides, among other things, that for so long as Platinum collectively beneficially owns (i) at least 30% of the voting power of the outstanding capital stock of the Company, Platinum will have the right to nominate for election to the board of directors of the Company no fewer than that number of directors that would constitute a majority of the number of directors if there were no vacancies on the board, (ii) at least 15% but less than 30% of the voting power of the outstanding capital stock of the Company, Platinum will have the right to nominate two directors, and (iii) at least 5% but less than 15% of the voting power of the outstanding capital stock of the Company, Platinum will have the right to nominate one director. The agreement also provides that if the size of the board of directors is increased or decreased at any time, Platinum’s nomination rights will be proportionately increased or decreased, respectively, rounded up to the nearest whole number. Based on Platinum's voting power of the outstanding capital stock of the Company and the size of the Board, as of December 31, 2025, Platinum has the right to nominate one director pursuant to the Investor Rights Agreement. As a result, Platinum may influence our policies and operations, including the appointment of management, future issuances of our common stock or other securities, and the payment of dividends, as well as impact decisions to enter into any other corporate transaction.

23

The interests of Platinum may not in all cases be aligned with the interests of the other holders of our common stock. For example, a sale of a substantial number of shares of stock in the future by Platinum could cause our stock price to decline. Further, Platinum could cause us to make acquisitions that increase the amount of the indebtedness that is secured or senior to the Company’s existing debt or sell revenue-generating assets, impairing our ability to make payments under such debt. Additionally, Platinum is in the business of making investments in companies and may from time to time acquire and hold interests in businesses that compete directly or indirectly with us. Accordingly, Platinum may also pursue acquisition opportunities that may be complementary to our business, and as a result, those acquisition opportunities may not be available to us. In addition, Platinum may have an interest in pursuing acquisitions, divestitures, and other transactions that, in their judgment, could enhance their equity investment, even though such transactions might involve risks to holders of our common stock.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

Not applicable.

24

ITEM 1C. CYBERSECURITY.

Risk Management and Strategy

We are committed to protecting Company information and the confidential information of our employees, customers, partners, and suppliers. To that end, we have in place various policies, procedures, and processes to identify, assess, manage, and prevent potential cybersecurity risks, and to timely detect the occurrence, and mitigate the effects of such risks, including from cyberattacks and data breaches. Our Director, Cybersecurity and Compliance, who has more than 13 years of information security and cybersecurity experience, manages cybersecurity, and oversees a team of dedicated cybersecurity personnel with various experience and certifications in information security and cybersecurity.Our personnel, along with external parties engaged to assess the sufficiency of our risk management processes (e.g., through penetration testing), continuously work to maintain and improve our cybersecurity program and the security and integrity of our information systems and infrastructure through our ongoing risk management program, including (i) by conducting cybersecurity assessments and audits to address threats and to stay in step with emerging malicious trends, and (ii) by performing due diligence on partners and suppliers to ensure similar values and appropriate security standards and safeguards are maintained by such partners and suppliers with respect to our information security assets and to third-party systems on which we rely. In addition, our Incident Response Team is trained to identify, quarantine, and remediate cybersecurity threats, and all of our employees are regularly trained to increase awareness of threats and to identify how to spot and avoid them.

As of the date of this report, we are not aware of any material risks from cybersecurity threats, including as a result of any cybersecurity incident, which have materially affected, or are reasonably likely to materially affect, us, our business strategy, our results of operations, or our financial condition.

Governance

Cybersecurity is a formal component of our overall risk management program, and our management, including our Chief Information Officer ("CIO"), regularly update the Audit Committee of the Board of Directors on the status of our cybersecurity program. In the event that management identifies significant cybersecurity risk exposures, it will present such exposures to the Audit Committee, which oversees the actions, security, and risk mitigation efforts taken across our cybersecurity framework. With this input from management, the Audit Committee evaluates our cybersecurity risks and the responses implemented to prevent and/or mitigate any such risks.

We have adopted an incident response plan that applies in the event of a cybersecurity incident involving a breach of our information technology systems and applications. Pursuant to this response plan, in the event of an incident, a multi-disciplinary team is assembled that is led by our CIO. The team in turn may leverage the expertise of third-party consultants, external legal counsel, and other resources. The plan includes procedures designed to facilitate containment of, and responses to, a cybersecurity incident, which are based on the type of incident, the location of the incident, and the breadth of the incident. The plan also establishes procedures for escalating incidents depending on severity and for notifying any impacted parties, including our customers, law enforcement and regulatory authorities, third-party vendors, and insurance providers. Our CIO will provide periodic updates to the Audit Committee and, when appropriate, the Board of Directors during this process. In addition to internal resources, we utilize third-party service providers to supplement and maintain our cybersecurity and our information technology systems.

25

ITEM 2. PROPERTIES.

As of December 31, 2025, the Company’s facilities are set forth below:

Operations in the United States

JT Ryerson and its U.S. affiliates maintain ninety operational facilities, one vacated facility, and one facility held for sale. Operational facilities include eight locations that are dedicated to administration services. All of our metals service center facilities are in good condition and are adequate for JT Ryerson’s existing operations. Approximately 64% of these facilities are leased. The lease terms expire at various times through 2045. JT Ryerson’s properties and facilities are adequate to serve its present and anticipated needs.

Location Own/Lease

Birmingham, AL Owned

Mobile, AL Owned

Fort Smith, AR Owned

Hickman, AR** Leased

Little Rock, AR Leased

Phoenix, AZ Leased

Cerritos, CA* Leased

Fresno, CA (2) Leased

Livermore, CA Leased

Vernon, CA Owned

Commerce City, CO Owned

Monroe, CT Owned

Waterbury, CT Leased

Wilmington, DE Leased

Jacksonville, FL Owned

Tampa Bay, FL Leased

Buford, GA*** Leased

Lavonia, GA Leased

Norcross, GA Owned

Des Moines, IA Owned

Eldridge, IA** Leased

Marshalltown, IA Owned

Chicago, IL (Headquarters)* Leased

Downers Grove, IL* Leased

Elgin, IL Leased

Loves Park, IL Leased

Montgomery, IL*** Leased

University Park, IL Leased

Burns Harbor, IN Owned

Indianapolis, IN Owned

Portage, IN** Owned

Richmond, IN*** Leased

Shelbyville, KY** Leased

Shreveport, LA Owned

St. Rose, LA Owned

Devens, MA Owned

Grand Rapids, MI* Leased

Lansing, MI Leased

Minneapolis, MN Leased

Plymouth, MN Owned

Maryland Heights, MO Leased

North Kansas City, MO Leased

Jackson, MS Owned

Charlotte, NC Owned

26

Greensboro, NC (2) Owned

Pikeville, NC Leased

Winston-Salem, NC* Leased

Youngsville, NC Leased

Omaha, NE Owned

Dover, NH Leased

Las Vegas, NV Leased

Lancaster, NY Leased

Cincinnati, OH Owned

Columbus, OH Leased

Hamilton, OH* Leased

Hilliard, OH Leased

Stow, OH*** Leased

Streetsboro, OH Leased

Strongsville, OH Leased

Oklahoma City, OK Leased

Tulsa, OK Leased

Ambridge, PA** Leased

North Huntingdon, PA Owned/Vacated

Charleston, SC** Owned

Greenville, SC Owned

Wellford, SC Owned

Chattanooga, TN Owned

Knoxville, TN* Leased

Memphis, TN Leased

Arlington, TX*** Leased

Dallas, TX Leased

El Paso, TX Leased

Houston, TX*** Owned

Houston, TX*** Leased

Houston, TX (2) Leased

McAllen, TX Leased

Salt Lake City, UT Leased

Pounding Mill, VA Leased

Richmond, VA Leased

Centralia, WA Leased

Spokane, WA Leased

Vancouver, WA* Leased

Green Bay, WI Owned

Green Bay, WI Leased/Vacated

Hammond, WI Leased

Milwaukee, WI (2) Owned

Schofield, WI Owned

Wausau, WI Owned

* Office space only

** Processing centers

***Toll Processing centers

27

Operations in Canada

Ryerson Canada, a wholly-owned indirect Canadian subsidiary of Ryerson Holding, has eight operational facilities and one facility held for sale in Canada. All of the metals service center facilities are in good condition and are adequate for Ryerson Canada’s existing and anticipated operations. Four facilities are leased. The lease terms expire at various times through 2032.

Location Own/Lease

Calgary, AB Owned

Edmonton, AB Owned

Richmond, BC Owned

Winnipeg, MB Owned

Winnipeg, MB Leased

Saint John, NB Owned/Vacated

Brampton, ON Leased

Mississauga, ON Leased

Vaudreuil, QC Leased

Operations in China

Ryerson China, an indirect wholly-owned subsidiary of Ryerson Holding, has three service and processing centers in China, in Guangzhou, Kunshan, and Tianjin, performing coil processing, sheet metal fabrication, and plate processing. Ryerson China’s headquarters office building is located in Kunshan. We own all of our China facilities and have purchased the related land use rights. All of the facilities are in good condition and are adequate for Ryerson China’s existing and anticipated operations.

Operations in Mexico

Ryerson Mexico, an indirect wholly-owned subsidiary of Ryerson Holding, has five facilities in Mexico. We have service centers in Monterrey, Mexicali, Tijuana, Hermosillo, and Queretaro, all of which are leased. The lease terms expire at various times through 2029. The facilities are in good condition and are adequate for Ryerson Mexico’s existing and anticipated operations.

ITEM 3. LEGAL PROCEEDINGS.

For information concerning legal proceedings as of December 31, 2025, please refer to Note 12: Commitments and Contingencies in the notes to the consolidated financial statements included in Part II, Item 8 of this Report on Form 10-K, which is incorporated into this item by reference.

ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.

28

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS, AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information for Common Stock

Our common stock is listed on the New York Stock Exchange (“NYSE”) under the symbol “RYI” and was first traded on August 13, 2014.

Holders

As of February 18, 2026, there were 8 stockholders of record of our common stock. Because many shares of our common stock are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of beneficial stockholders represented by these record holders.

Dividend Policy

We paid cash dividends on our common stock of $0.1875 in each quarter of 2025. The declaration and payment of cash dividends on our common stock in the future, whether at current levels or at all, will be at the discretion of our Board of Directors and will depend upon our results of operations, earnings, capital requirements, financial condition, future prospects, contractual restrictions, including under the Ryerson Credit Facility, and other factors deemed relevant by our Board of Directors.

29

Performance Graph

The following graph and accompanying table show the cumulative total return to stockholders of Ryerson Holding’s common stock relative to the cumulative total returns of the S&P 500 and a metals service center peer group (the “Peer Group”). The graph tracks the performance of a $100 investment in each of the indices (with reinvestment of dividends) from December 31, 2020 to December 31, 2025. While there is no nationally-recognized industry index consisting of metals service center companies, Ryerson considers its Peer Group to consist of Reliance Steel & Aluminum Co., and Worthington Steel, Inc., each of which has securities listed for trading on the NASDAQ; Russel Metals Inc., which has securities listed for trading on the Toronto Stock Exchange; and Klöckner & Co SE., which has securities listed for trading on the XETRA Frankfurt Stock Exchange; and until its acquisition by Ryerson on February 13, 2026, Olympic Steel Inc., which had securities listed for trading on the NASDAQ. The returns of each member of the Peer Group are weighted according to that member’s stock market capitalization. On December 1, 2023 Worthington Industries, Inc. spun off their steel division into Worthington Steel, Inc. The chart below includes Worthington Industries, Inc. data for December 31, 2020 through November 30, 2023 and Worthington Steel, Inc. data thereafter, with returns and market capitalization weighted for each respective period. The stock price performance included in this graph is not necessarily indicative of future stock price performance.

Comparison of 5 Year Cumulative Total Return

Assumes Initial Investment of $100

This graph is not deemed to be “filed” with the Securities and Exchange Commission (the "SEC") or subject to the liabilities of Section 18 of the Securities Exchange Act of 1934 (“the Exchange Act”), and should not be deemed to be incorporated by reference into any of our prior or subsequent filings under the Securities Act of 1933 or the Exchange Act.

30

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

On August 3, 2022, the Board of Directors authorized a new $75 million share repurchase program after the exhaustion of the previous share repurchase program. On May 1, 2023, the Board of Directors authorized an increase to $100.0 million and extended the program to April 2025. On July 30, 2024, the Board of Directors authorized an additional increase of $50.0 million to the existing share repurchase program, bringing the amount authorized to be repurchased to $63.6 million, and extended the program through April 2026. Under the program, management is not obligated to repurchase shares, but has discretion in determining the conditions under which shares may be purchased from time to time. We may opportunistically repurchase shares through open market purchases, privately negotiated transactions, and transactions structured through investment banking institutions under plans relying on Rule 10b5-1 or Rule 10b-18 promulgated under the Securities Exchange Act of 1934, as amended. Repurchased shares are reverted to the status of Treasury Stock. As of December 31, 2025, $38.4 million remains outstanding under the share repurchase program. There were no share repurchases made during the year-ended December 31, 2025.

Recent Sale of Unregistered Securities and Use of Proceeds

None.

ITEM 6. RESERVED.

31

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

The following discussion and analysis should be read in conjunction with the audited Consolidated Financial Statements of Ryerson Holding Corporation and Subsidiaries and the Notes thereto in Item 8. “Financial Statements and Supplementary Data.” This discussion contains forward-looking statements that involve risks and uncertainties. See the section entitled “Special Note Regarding Forward-Looking Statements.” Our actual results and the timing of selected events could differ materially from those discussed in these forward-looking statements as a result of certain factors, including those discussed in Item 1A. “Risk Factors” and elsewhere in this Form 10-K.

This section of this Form 10-K generally discusses 2025 and 2024 items and year-over-year comparisons between 2025 and 2024. Discussions of 2023 items and year-over-year comparisons between 2024 and 2023 that are not included in this Form 10-K can be found in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Part II, Item 7 of the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2024.

Overview

Business

Ryerson Holding Corporation (“Ryerson Holding”), a Delaware corporation, is the parent company of Joseph T. Ryerson & Son, Inc. (“JT Ryerson”), a Delaware corporation. As of December 31, 2025 affiliates of Platinum Equity, LLC (“Platinum”) own approximately 3,924,478 shares of our common stock, which is approximately 12.2% of our issued and outstanding common stock.

We are a leading value-added processor and distributor of industrial metals with operations in the United States ("U.S.") through JT Ryerson and other U.S. subsidiaries, in Canada through our indirect wholly-owned subsidiary Ryerson Canada, Inc., a Canadian corporation (“Ryerson Canada”), and in Mexico through our indirect wholly-owned subsidiary Ryerson Metals de Mexico, S. de R.L. de C.V., a Mexican corporation (“Ryerson Mexico”). In addition to our North American operations, we conduct metal processing and distribution operations in China through an indirect wholly-owned subsidiary, Ryerson China Limited, a Chinese limited liability company (“Ryerson China”). Unless the context indicates otherwise, Ryerson Holding, JT Ryerson, Ryerson Canada, Ryerson Mexico, and Ryerson China together with their subsidiaries, are collectively referred to herein as “Ryerson,” “we,” “us,” “our,” or the “Company.”

Industry and Operating Trends

We are a metals service center providing value-added processing and distribution of industrial metals with operations in the U.S., Canada, Mexico, and China. We purchase large quantities of metal products from primary producers and sell these materials in smaller quantities to a wide variety of metals-consuming industries. We carry a full line of approximately 75,000 products in stainless steel, aluminum, carbon steel, and alloy steels and a limited line of nickel and red metals in various shapes and forms. In addition to our metals products, we offer numerous value-added processing and fabrication services, and nearly 80% of the metals products we sell are processed by us by bending, beveling, blanking, blasting, burning, cutting-to-length, drilling, flattening, forming, grinding, laser cutting, machining, notching, painting, polishing, punching, rolling, sawing, shearing, slitting, stamping, tapping, threading, welding, or other techniques to process materials to a specified thickness, length, width, shape, and surface quality pursuant to specific customer orders.

Similar to other metals service centers, we maintain substantial inventories of metals to accommodate the short lead times and just-in-time delivery requirements of our customers. Accordingly, we purchase metals to maintain our inventory at levels that we believe to be appropriate to satisfy the anticipated needs of our customers based upon customer forecasts, historic buying practices, supply agreements with customers, mill lead times, and market conditions. Our commitments to purchase metals are generally at prevailing market prices in effect at the time we place our orders. At the request of our customers, we have some fixed price sales contracts. We have entered into swaps in order to mitigate our risk of volatility in the price of metals related to these contracts and we have entered into metals hedges to mitigate our own risk of volatility in the price of metals. We have no long-term, fixed-price metals purchase contracts. When metals prices decline, customer demands for lower prices and our competitors’ responses to those demands could result in lower sale prices and, consequently, lower gross profits and earnings as we sell existing metals inventory. When metals prices increase, competitive conditions will influence how much of the price increase we may pass on to our customers.

The metals service center industry is cyclical and volatile in both demand and pricing, and difficult to predict. In 2025, Ryerson experienced marginal volume growth of 0.5% and an average selling price decrease of 1.1% compared to 2024 as the period was characterized by subdued downstream demand and volatile pricing, impacted by tariff trade policy. Changes in average selling prices are primarily driven by commodity metals prices, which impact Ryerson’s selling prices over the subsequent three to six-month period.

32

In 2025, indicators for key steel industry end markets reported contraction in industrial activity momentum but output improvement relative to the previous year. This is evidenced by the Institute for Supply Management’s Purchasing Managers’ Index (“PMI”), which indicated that the majority of surveyed purchasing managers reported a decline in activity in nearly every month of 2025 with the exception of January and February, as marked by readings below the growth threshold of 50. January 2026 reversed the trend with a reading above the growth threshold of 52.6. On the other hand, U.S. Industrial Production, which reports year-over-year industrial sector business output, reported growth for each month of 2025, indicating that while PMI would suggest that 2025 was a year of widespread contractionary momentum, there was resiliency in the overall output relative to the previous year.

According to the Metal Service Center Institute, North American service center volumes decreased by 1.5% in 2025 compared to 2024. Also on a North American basis, Ryerson's volumes declined by 0.4% over the same period, implying that the Company gained market share during the year. Reflecting on volume performance by end-market, Ryerson experienced year-over-year declines in Commercial Transportation, Climate, Heavy Equipment, and Power sectors. These declines were partially offset by demand growth in Fabrication & Welding, Machine Shop, and Machinery & Equipment sectors.

Olympic Steel Acquisition

On February 13, 2026 (the “Closing Date”), the Company completed the transactions contemplated by the Agreement and Plan of Merger, (the “Merger Agreement”), dated as of October 28, 2025, by and among Ryerson Holding, Crimson MS Corp., an Ohio corporation and a direct wholly owned subsidiary of Ryerson Holding (“Merger Sub”), and Olympic Steel, Inc. ("Olympic Steel"). On the Closing Date, pursuant to the Merger Agreement, Merger Sub merged with and into Olympic Steel in accordance with Ohio law. At the effective time of the Olympic Steel Merger, each issued and outstanding share of common stock of Olympic Steel, without par per share (the “Olympic Common Stock”) (other than certain excluded shares), was converted into the right to receive 1.7105 shares the Ryerson Holding’s common stock, rounded down to the nearest whole share, and cash in lieu of fractional shares. Upon the completion of the Olympic Steel Merger, Olympic Steel, as the surviving corporation, became a wholly owned subsidiary of Ryerson Holding. As a result of the Olympic Steel Merger, Ryerson Holding issued approximately 19.5 million shares of its common stock to former holders of Olympic Common Stock

Olympic Steel is a metals service center focused on the direct sale and value-added processing of carbon and coated sheet, plate, and coil products; stainless steel sheet, plate, bar, and coil; aluminum sheet, plate, and coil; pipe, tube, bar, valves and fittings, tin plate, and metal-intensive end-use products. The combination of the two companies enhances Ryerson's presence as North America's second largest metals service center, bringing Olympic Steel's complementary footprint, capabilities, and product offering into Ryerson's intelligently interconnected network of value-added service centers. Together, functioning as Ryerson Holding Corporation, the combined entity is expected to generate approximately $120 million in annual synergies by the beginning of 2028 through procurement scale, efficiency gains, commercial enhancement, and network optimization. Please refer to Note 19 — “Subsequent Events” of Part II, Item 8 "Financial Statements and Supplementary Data" for further information on the Olympic Steel merger.

Ryerson’s 2025 Strategy Achievements

Ryerson’s market strategy focuses on providing excellent customer experiences consistently with speed at scale. Our culture is based on our trademarked “say yes, figure it out” mantra. We strive to grow our volume and sustainably expand margins by increasing our fabrication business, transactional sales, and improving our speed through tools and analytics. Ryerson’s financial strategy includes a focus on generating cash from operating activities and continuously improving a “through the cycle” operating model to maintain a strong balance sheet, re-invest in the growth of the business, and generate returns to stockholders.

In 2025, coming off of a historically high three-year investment cycle, the Company focused on operationalizing and optimizing major capital investment projects at its service centers in Shelbyville, KY, Norcross, GA, Dallas, TX, and Los Angeles, CA. The primary objective of these investments was to improve Ryerson's operating model and the customer experience. The expansion of our Shelbyville service center, for example, was an investment in our bright metals flat roll processing capabilities to support transactional market share growth at a lower cost to service with improved service levels. Likewise, the investments made in Norcross, Dallas, and Los Angeles included processing equipment, which we expect will improve our ability to provide our customers with higher value-added products and thereby improve our gross margins.

33

2025 Performance

Demand conditions in 2025 continued to be subdued while pricing was volatile, impacted by tariff trade policy. Nonetheless, we believe that the investments that we have made in our service capabilities and operating model will enable us to provide better experiences for our customers and, in turn, enable greater value generation for our stockholders.

These key metrics illustrate Ryerson’s financial performance for the full year 2025 compared to 2024:

Total Revenues Gross Margin Net Loss Attributable to Ryerson Holding Corporation