10-K

mlss20201231_10k.htm

FORM 10-K

mlss20191231_10k.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2020.

For the transition period from to

Commission file number 001-14053

Milestone Scientific Inc.

(Exact name of registrant as specified in its charter)

425 Eagle Rock Avenue, Roseland, NJ 07068

(Address of principal executive offices)

Registrant’s telephone number, including area code: 973-535-2717

Securities registered pursuant to Section 12(b) of the Act:

Title of each class Symbol Name of each exchange on which registered

Common Stock, par value $.001 per share MLSS NYSE American

Securities registered pursuant to section 12(g) of the Act: NONE.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐ Yes ☑ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐ Yes ☑ No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☑ Yes ☐ No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ☐ Yes ☑ No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment of this Form 10-K. ☑

Indicate by check mark whether the registrant is a large, accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large, accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large, accelerated filer ☐ Accelerated filer ☐

Non-accelerated filer ☐ Smaller reporting company ☑

Emerging Growth Company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☑

As of June 30, 2020, the last business day of the registrants most recently completed second fiscal quarter, the aggregate market value of the common stock held by non- affiliates of the issuer was $85,817,776. This amount is based on the closing price of $1.95 per share of the registrant's common stock as of such date, as reported on the NYSE American. As of March 31, 2021, the registrant has a total of 66,558,550 shares of Common Stock, par value $0.001 per share outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

None

MILESTONE SCIENTIFIC INC.

Form 10-K Annual Report

TABLE OF CONTENTS

PART I

Item 1. Business 4

Item 1A. Risk Factors 15

Item 1B. Unresolved Staff Comments 26

Item 2. Description of Property 26

Item 3. Legal Proceedings 27

Item 4. Mine Safety Disclosure 27

PART II

Item 6. Selected Financial Data 27

Item 7. Management's Discussion and Analysis or Plan of Operations 28

Item 7A. Quantitative and Qualitative Disclosure about Market Risk 35

Item 8. Financial Statements 35

Item 9A. Controls and Procedures 35

Item 9B. Other Information 36

PART III

Item 11. Executive Compensation 40

Item 14. Principal Accounting Fees and Services 46

PART IV

Item 15. Exhibits and Financial Statement Schedules 47

SIGNATURES 49

EXHIBITS

FORWARD-LOOKING STATEMENTS

Certain statements made in this Annual Report on Form 10-K are “forward-looking statements” (within the meaning of the Private Securities Litigation Reform Act of 1995) regarding the plans and objectives of management for future operations. Such statements involve known and unknown risks, uncertainties and other factors that may cause actual results, performance, or achievements of Milestone Scientific Inc. (“Milestone Scientific”) to be materially different from any future results, performance, or achievements expressed or implied by such forward-looking statements. The forward-looking statements included herein are based on current expectations that involve numerous risks and uncertainties. Milestone Scientific’s plans and objectives are based, in part, on assumptions involving the continued expansion of its business. Assumptions relating to the foregoing involve judgments with respect to, among other things, future economic, competitive and market conditions and future business decisions, all of which are difficult or impossible to predict accurately and many of which are beyond the control of Milestone Scientific. Although Milestone Scientific believes that its assumptions underlying the forward-looking statements are reasonable, any of the assumptions could prove inaccurate. Considering the significant uncertainties inherent in the forward-looking statements included herein, particularly in view of our history of operating losses that are expected to continue, requiring additional funding which we may be unable to raise capital when needed (which may force us to delay, curtail or eliminate commercialization efforts of our CompuFlo Epidural Computer Controlled Anesthesia System), the early stage operations of and relatively lack of acceptance of our medical products, relying exclusively on two third parties to manufacture our products, changes in our informal manufacturing arrangements made by the manufacturer of our products and disruptions at the manufacturing facility of our manufacturers exposes us to risks that may harm our business, raising additional funds by issuing securities or through licensing or lending arrangements may cause dilution to our existing stockholders, restrict our operations or require us to relinquish proprietary rights, if physicians do not accept nor use our CompuFlo Epidural Computer Controlled Anesthesia System, our ability to generate revenue from sales will be materially impaired, exposure to the risks inherent in international sales and operations, including China, and developments by competitors may render our products or technologies obsolete or non-competitive, the inclusion of such information should not be regarded as a representation by Milestone Scientific or any other person that the objectives and plans of Milestone Scientific will be achieved. Milestone Scientific undertakes no obligation to revise or update publicly any forward-looking statements for any reason.

PART I

All references in this report to “Milestone Scientific, Inc.,” “us,” “our,” “we,” the “Company “or “Milestone” refer to Milestone Scientific Inc., and its consolidated subsidiaries, Wand Dental, Inc., Milestone Advanced Cosmetic Inc. and Milestone Medical Inc. and affiliate, unless the context otherwise indicates. Milestone Scientific is the owner of the following registered U.S. trademarks: CompuDent®; CompuMed®; CompuFlo®; DPS Dynamic Pressure Sensing technology®; Milestone Scientific®; CathCheckTM, the Milestone logo®; Safety Wand®; STA Single Tooth Anesthesia System®; and The Wand®.

Item 1. Business

Overview

Milestone Scientific is a biomedical technology research and development company that patents, designs, develops and commercializes innovative diagnostic and therapeutic injection technologies and devices for medical, dental, cosmetic. Since our inception, we have engaged in pioneering proprietary, innovative, computer-controlled injection technologies, and solutions for the medical and dental markets. We believe our technologies are proven and well established.

We have focused our resources on redefining the worldwide standard of care for injection techniques by making the experience more comfortable for the patient by reducing the anxiety and stress of receiving injections from the healthcare provider. Our computer-controlled injection devices make injections precise, efficient, and virtually painless. Milestone’s proprietary DPS Dynamic Pressure Sensing technology® is our technology platform that advances the development of next-generation devices. It regulates flow rate and monitoring pressure from the tip of the needle, through platform extensions for local anesthesia for subcutaneous drug delivery, used in various dental and medical injections. It has specific medical applications for cosmetic botulinum toxin injections, epidural space identification in regional anesthesia procedures and intra-articular joint injections.

In 2020 the Company received a Notice of Allowance from the United States Patent and Trademark Office (USPTO) related to its new CompuPulse System, which combines the benefits of our CompuWave technology with a manual syringe. The new CompuPulse System allows one to identify a pulsatile pressure waveform in a variety of applications, thereby improving the reliability and safety of a drug delivery procedure. Importantly, not all procedures require the sophistication of our CompuFlo system, which precisely controls the administration and flow rate of medication as it is being administered. This new technology provides an efficient and low-cost alternative for procedures where a manual syringe may suffice, while still providing the ability to verify needle and subsequent catheter placement.

In 1997, Milestone Scientific released its first commercial product, the first computer-controlled local anesthesia delivery (C-CLAD) system, into the North American marketplace. This product was our proprietary, computer-controlled anesthetic delivery device, initially marketed as The Wand®, a computer-controlled local anesthesia delivery (C-CLAD) device with a single-use disposable handpiece for the dental market, regulating and controlling the flow rate of anesthetics. This device, with the addition of several new features, was later re-branded commercially as the CompuDent® System.

In 2001, Milestone Scientific was issued the initial United States Patent for CompuFlo® technology, entitled “Pressure/Force Computer Controlled Drug Delivery Instrument with Exit Pressure,” allowing the device to continuously monitor and control the exit pressure of medication and/or fluid during an injection. We call this innovation DPS Dynamic Pressure Sensing Technology. This same technology also enables doctors to accurately identify different tissue types based on detecting exit pressure during an injection, facilitating the injection into the correct skin layer. In 2004, the United States Patent Office issued a “Notice of Allowance” for patent protection on two additional critical elements of our CompuFlo technology: “Drug Delivery Instrument with Profiles” and “Pressure/Force Computer Controlled Drug Delivery with Automated Charging”.

Given our experience and established brand awareness within the dental industry, we elected to focus our initial product development efforts on the integration of CompuFlo’s DPS Dynamic Pressure Sensing Technology into our legacy dental injection device. In 2006, the FDA cleared the first system utilizing CompuFlo'sDPS Dynamic Pressure Sensing Technology— the STA (Single Tooth Anesthesia) System and handpiece for use in the dental market, providing continuous real-time visual and audible pressure feedback from the tip of the needle while also precisely regulating the flow rate. Because of combining the ability to regulate the flow rate and monitor pressure at the tip of the needle, Milestone Scientific developed the industry’s first solution for painlessly administering an intra-ligamentary injection, i.e., “single-tooth anesthesia” which could be used as the only injection necessary for achieving dental anesthesia, foregoing the need to administer traditional injections such as a nerve branch block. In addition to single-tooth anesthesia,the STA System can effectively perform all the traditional injections that dentists routinely give but can provide them virtually pain free and with numerous clinical advantages. This device, which also utilizes a disposable handpiece, is currently marketed by Milestone Scientific as the Wand STA® System.

Milestone Scientific believes its dental devices have set a new standard of care for dental injections. Our dental devices have been used to administer tens of millions of injections worldwide. Each of our devices has a related single use disposable handpiece, leading to a continuing revenue stream following sale of the device. At present, we sell disposable handpieces unique to our legacy product (the Wand and CompuDent) to users who have not upgraded to our current dental product, the WandSTA System.

Building on the success of our proprietary, core technology platform for dental injections, and desiring to pursue other growth opportunities, we have recently begun to expand the uses and applications of our proprietary, patented technologies to achieve greater operational efficiencies, enhanced patient safety and therapeutic adherence, patient satisfaction, and improved quality of care across a broad range of medical specialties. In June 2017, we received FDA regulatory clearance to sell the CompuFlo Epidural Computer Controlled Anesthesia System in the United States for certain medical applications. We intend to continue to expand the uses and applications of our DPS Dynamic Pressure Sensing technology.

We believe that we and our technology solutions are widely recognized by key opinion leaders (i.e., academics, anesthesiologists and practicing dentists whose opinions are widely respected), industry experts and medical and dental practitioners as a leader in the emerging, computer-controlled injection industry.

Milestone Scientific remains focused on advancing efforts to achieve the following six primary objectives:

● Safety of a drug delivery procedure.

Our dental devices are sold in the United States, U.S. territories, Canada and in 60 other countries with FDA, CE, and other clearances. In 2020 our epidural devices, which received FDA clearance in 2017, have had minimal sales.

DPS Dynamic Pressure Sensing Technology; Our Proprietary Core Technology Platform

Our first commercial product, our proprietary, computer-controlled anesthetic delivery device, initially marketed as the CompuDent® Wand/STA system, later re-branded commercially as the Wand /STA System, for the dental market, uses patented technology, including a single-use disposable handpiece, to control the flow rate of the anesthesia during the injection, allowing virtually painless injections for all dental procedures with optimal effectiveness. Over the years, the CompuDent System has been widely heralded as a revolutionary device, considered one of the major advances in dentistry in the 20th century, and has been favorably evaluated in more than 50 peers reviewed or independent clinical research reports.

Our next significant intellectual property advancement was a quantum improvement over our CompuDent® System – the development of our proprietary CompuFlo® Computer-Controlled Drug Delivery System with DPS Dynamic Pressure Sensing Technology, an advanced and FDA-approved technology for the painless and accurate delivery of drugs, anesthetics, and other medicaments into all tissue types, as well as for the aspiration of bodily fluids or previously injected substances. Its regulation and control of the flow rate continues to provide painless delivery benefits, while its innovative dynamic pressure sensing capability provides visual and audible in-tissue pressure feedback, identifying tissue types to the healthcare provider. This pressure feedback extends the benefit of painlessness from anesthetics with known viscosities to a wide range of liquid drugs and other medicaments with varying viscosities and flow rates. Such pressure feedback, part of our DPS Dynamic Pressure Sensing Technology, also allows the healthcare provider to know when certain types of tissues have been penetrated and permits the healthcare provider to inject medicaments precisely at the desired location. Thus, real-time continuous pressure feedback can prevent the injection to tissue outside the intended target area, an important characteristic in the injection of chemotherapeutics and other toxic substances.

In addition to the ability to determine exit pressure in-situ (in the injection site tissue) at the tip of the needle, minimizing tissue damage (and eliminating the pain of the injection) because the flow rate and pressure of the injection are precisely controlled, CompuFlo® computer-controlled Drug Delivery Systems features a proprietary algorithm, which allow for the measurement of the exit pressure. These algorithms contain the critical components of specific drugs, parameters of needles, tubing and syringes and all other pertinent components for the safe and efficacious delivery of medications for all procedures. CompuFlo® technology also enables devices to provide a digital record of the time and volume of anesthetic or medicament injected.

Each CompuDent® and Wand/STA System also includes a disposable injection handpiece that is extremely comfortable, light, and easy to use, providing for precise tactile control during the injection, an electro-mechanical (computer-controlled) fluid delivery instrument and the ability to record data from the injection event. The pencil grip used with the handpieces provides the practitioner with enhanced tactile sense and accurate control and allows bi-directional rotation, eliminating needle deflection, resulting in a greater accuracy and success. The handpiece is vibration-free because it does not have a motor or electrical component in it and, since the handpiece does not look like a typical syringe, we believe it also reduces patient anxiety and offers the possibility of curing dental phobia of which an estimated 40 million Americans suffer.

As confirmed by numerous noted medical and dental experts within academia and the clinical practice arenas, CompuFlo Systems using DPS Dynamic Pressure Sensing technology have the potential to greatly increase the safety and efficacy of many drug delivery procedures that currently rely upon the over 150-year-old hypodermic syringe technology and the tactile senses and delivery expertise of the administrator.

Devices using DPS Dynamic Pressure Sensing Technology such as the CompuFlo System can be used to inject a wide variety of liquid medicaments as well as anesthetics. We believe our CompuFlo System avoids the negative side effects from the use of traditional hypodermic drug delivery injection devices, which are well documented in dental and medical literature and include risk of death, transient or permanent paralysis, pain, tissue damage and post-operative complications. Pain and tissue damage often result from uncontrolled flow rates and pressure created during the administration of drug solutions into human tissue. While several technologies have can control the flow rate, we believe our patented DPS Dynamic Pressure Sensing technology and CompuFlo Systems provide the control of pressure during the injection as well accurately and precisely delivery the drug.

We believe our DPS Dynamic Pressure Sensing technology and CompuFlo Systems provides the following benefits:

Our first system utilizing a DPS Dynamic Pressure Sensing Technology platform was our STA System and related handpiece for the dental market, currently marketed as the Wand/ STA System. Another platform extension of our DPS Dynamic Pressure Sensing Technology platform is the CompuFlo Epidural System. In addition, we have developed platform extensions of our DPS Dynamic Pressure Sensing Technology platform for intra-articular (for administering corticosteroids, hyaluronic acid, and other medicaments into both major and minor joints for the alleviation of pain associated with arthritis and other deleterious joint conditions), cosmetic and veterinary applications. We intend to continue to develop and commercialize new applications of our DPS Dynamic Pressure Sensing technology platform as commercial line extensions.

CompuFlo Epidural Computer Controlled Anesthesia System

In June 2017, we received FDA regulatory clearance to sell the CompuFlo Epidural Computer Controlled Anesthesia System in the United States for certain medical applications. The CompuFlo Epidural Computer Controlled Anesthesia System obtained CE mark approval in September 2014, allowing it to be marketed and sold in most European countries and many other countries accepting CE approved devices.

The CompuFlo Epidural Computer Controlled Anesthesia System (or the CompuFlo Epidural System) is one such platform extension of our DPS Dynamic Pressure Sensing Technology platform, providing anesthesiologists and other healthcare providers the ability, for the first time, to quantitatively determine and document the pressure at the needle tip in real-time for proper needle placement in epidural procedures used for labor/delivery and back pain management. Our proprietary DPS Dynamic Pressure Sensing Technology allows the CompuFlo Epidural System to provide objective visual and audible in-tissue pressure feedback that allows anesthesiologists to identify and confirm placement in the epidural space.

Our CompuFloEpidural System provides an objective tool that we believe consistently and accurately identifies the epidural space by detecting the difference in pressure between the ligamentum flavum and the intrafilamentary tissue. In studies, the CompuFlo Epidural Systemwith DPS Dynamic Pressure Sensing Technology has been shown to be effective in correctly identifying the epidural space. Knowing the precise location of a needle tip during an epidural injection procedure provides a measure of safety not presently available to doctors using conventional syringes. In the absence of fluoroscopy, identifying the epidural space by relying on the subjective perception of loss of resistance to saline requires a very long education period and learning curve and could result in morbidity and lack of efficacy. During back pain management epidural procedures, where fluoroscopy is commonly used, the CompuFlo Epidural System allows the clinician to locate the epidural space, without using fluoroscopy, thereby protecting the patient and clinician from unnecessary exposure to radiation along with significantly reducing capital and operating costs.

An abstract presented at the 45th Chilean Congress of Anesthesiology on November 11, 2017, entitled: Utilization of Dynamic Pressure SensingTM in Epidural Procedures for Child Birth and representing the first formal presentation of our CompuFlo Epidural System in South America, summarized the results of a recent independent, investigator-led clinical study evaluating the use of Milestone’s CompuFlo Epidural System in 50 labor and delivery patients, concluding that the epidural space was correctly identified in 100% of the patients. In addition, the epidural space was located on the first attempt with all the patients. There were no cases of accidental puncture of the dura, a common risk factor for traditional epidural procedures using the loss of resistance technique. We believe that this represents a significant benefit for the payors, physicians, and most importantly, the patients.

In November 2018, a clinical study published in the International Journal of Obstetric Anesthesia found the CompuFlo Epidural System to be successful in objectively identifying the epidural space—even in difficult patients. Accurate epidural space identification can build physician and resident confidence while reducing the number of attempts, poor catheter placement and accidental dural punctures that can be costly to the hospital and painful for the patient.

In January 2019, the Company announced the results of a four hundred patient clinical trial by researchers from the University of Miami, University of Texas, and Northwestern University, and two prominent California-based pain clinics. Published-Ahead-of-Print in Anesthesia & Analgesia (the official Journal of the International Anesthesia Research Society), the randomized, controlled study compared the effectiveness of the CompuFlo Epidural System in labor and delivery and chronic pain management, where loss of resistance and fluoroscopy are the current standards of care. The CompuFlo Epidural System was found to be ninety-nine percent successful in objectively identifying the epidural space even in challenging patients with a higher body mass index.

In February 2019, the Company announced a new 120-patient clinical study published in Anesthesiology Research & Practice that verifies the CompuFlo Epidural System consistently differentiates false loss of resistance from true loss of resistance during epidural placement. In all cases where the CompuFlo Epidural System’s pressure measurements were used to objectively identify the epidural space, the block was performed successfully with no complications.

In February 2019, the Company announced Ospedale “Pugliese Ciaccio” di Catanzaro is the first hospital in Italy to use the CompuFlo Epidural System for all epidurals in labor and delivery. For a local hospital performing a limited number of epidurals, the CompuFlo Epidural System offers a real-time, objective tool for accurate epidural space identification to help reduce failure rates and accidental dural punctures that can require further treatment and interventions.

In April 2019, the Company entered the medical education market with the introduction of the CompuFlo® Epidural Trainer (CompuFlo Trainer), an instructional instrument that uses pressure sensing technology to improve epidural placement success. The company has signed an agreement to distribute the CompuFlo Trainer with American 3B Scientific, a leading supplier of didactic material for medical education.

In June 2019, the Company announced the results of two research abstracts featuring the CompuFlo® Epidural device (CompuFlo) at Euroanesthesia 2019, Europe's largest annual event showcasing the latest knowledge in the field of anesthesia. The abstracts were presented during scientific poster sessions highlighting how CompuFlo's objective detection of tissue pressure makes challenging procedures with difficult patients more efficient and accelerates clinical competency for trainee.

In October 2019, the company announced the first international multicenter study to compare the incidence of accidental dural puncture using the CompuFlo® Epidural System versus the continuous loss of resistance (LOR) technique. The study collected records between 2015 and 2019 of epidural administration on labor and delivery patients using the CompuFlo® Epidural System from four institutions, one in the U.S., one in Chile, and two from Italy. Among the four sites, there were 812 patients who received epidural analgesia with CompuFlo® and none had accidental dural puncture regardless of the composition of the epidural performer types. The Company also announced that Professor Rovnat Babazade, MD, University of Texas Medical Branch at Galveston, Department of Anesthesiology, presented a poster at the ANESTHESIOLOGY® 2019 Annual Meeting in Orlando, Florida. The poster, entitled, "International Multicenter Study of Accidental Dural Puncture Rate; Comparison of the CompuFlo with Traditional Method,'' is available on the Company's website. ANESTHESIOLOGY 2019, hosted by the American Society of Anesthesiologists (ASA), unites more than 14,000 clinicians, thought leaders and professionals from around the world.

In November 2019, the Company and 3B Scientific, the world's leading supplier of didactic material for medical education, signed a global agreement expanding distribution of the CompuFlo® Epidural Trainer (CompuFlo Trainer). The expanded agreement allows 3B Scientific to capitalize on momentum and gives more anesthesia instructors the ultimate solution to accelerate the epidural procedure's learning curve and trainee success. The CompuFlo Trainer is an instructional instrument that uses Dynamic Pressure Sensing technology and objective intelligence to improve epidural placement by trainees. The instrument links trainee tactile feel with visual and audible confirmation of real-time pressure changes to verify the epidural space has been reached.

In January 2020, the Company received a Notice of Allowance for a key patent from the U.S. Patent and Trademark Office on its CompuWave technology, which is being integrated into the CompuFlo® Epidural System. The Company is constantly evolving and innovating the technology. This patent represents a significant achievement for the Company since it extends the IP protection around the CompuFlo instrument for another 20 years and provides not only additional confirmation of placement, but also verification during the procedure that the catheter has not been displaced.

In February 2020, the Company announced an abstract entitled "Confirmation of epidural catheter location by epidural pressure waveform recordings by the CompuFlo® Epidural Instrument (CompuFlo)," has been accepted for presentation at the prestigious Euroanaesthesia 2020 Congress which was to take place May 30 - June 1, 2020 in Barcelona, Spain. Euroanaesthesia is Europe’s largest annual event showcasing the latest news and innovations in the field of anesthesia, perioperative medicine, intensive care, emergency medicine and pain treatment. This international event gathers upwards of six thousand delegates from around the world. The abstract will be presented during scientific poster sessions highlighting how CompuWave technology integrated with the CompuFlo Epidural System combines both objective in-line pressure measurements and the detection of a pulsatile pressure waveform in a single system. However due to the continual spread of COVID-19, the Company’s presented at the prestigious Euroanaesthesia 2020 Congress virtual trade in Barcelona August 2020.

Moreover, also in February 2020, the Company introduced the new pre-assembled disposable kit for the CompuFlo® Epidural System that has received CE Mark approval in Europe through the Company’s supplier. The Board of Directors of the Company believes that this CE Mark approval overcomes an important hurdle to commercialization in Europe. Based on market feedback, it was evident that anesthesiologists using the epidural instrument preferred to have the disposable kit pre-assembled before packaging to save valuable minutes in the operatory.

On April 21, 2020, Milestone Scientific announced that it had validated and integrated the new CathCheckTM feature into the CompuFlo® Epidural System. Using CathCheckTM, physicians and nurses can monitor the placement of a catheter to determine the presence or absence of a pulsatile waveform (heartbeat) providing new information that can be used to determine if the catheter is in place or has become dislodged from the epidural space.

On May 13, 2020, the Company announced a study was published in the Open Journal of Anesthesiology validating the efficacy of the CompuFlo® CathCheckTM System to confirm the correct placement and positioning of an epidural catheter for use during and after an epidural procedure. This is another validation that the CathCheckTM feature will help to significantly reduce time and cost for the institution by providing a more reliable way to re-check the catheter throughout the day to ensure that the catheter has not been displaced.

On October 13, 2020, Milestone Medical announced a Group Purchasing Agreement with Premier, an USA leading healthcare improvement company, utilizing an alliance of approximately 4,100 U.S. hospitals and 200,000 other providers to transform healthcare. The Agreement, which was effective November 1, 2020, allows Premier members, at their discretion, to utilize pricing and terms pre-negotiated by Premier for the CompuFlo® Epidural System and CathCheckTM. The Agreement expires on February 28, 2022.

CompuFlo Intra-Articular Computer Controlled Injection System

Another platform extension utilizing our DPS Dynamic Pressure Sensing technology platform and CompuFlo Epidural System are our devices for administering corticosteroids and other medicaments into both major and minor joints for the alleviation of pain associated with arthritis and other deleterious joint conditions. As features of our DPS Dynamic Pressure Sensing technology, this device also precisely controls in-tissue pressure, increasing patient safety by reducing the risk of tissue damage and post-treatment pain related to excessive pressure that may occur during certain injections. Identification of the tissue, in which the needle tip is imbedded, is believed to be highly important in intra-articular injections and numerous organs, subcutaneous and intramuscular injections. The intra-articular device has not obtained regulatory clearance in the US.

We believe our intra-articular injection device is particularly efficacious for arthritis patients who are obliged to endure multiple painful injections annually for a lifetime. Often these injections are not efficacious because the doctor using a syringe fails to locate the intra-articular space or does not inject the appropriate volume of corticosteroids or other medicament into that space. Our CompuFlo Epidural System has been shown successful in an independent animal study in administering medicaments into a certain intra-articular space using its computer-controlled pressure sensing capabilities.

The intra-articular device has obtained CE mark clearance and may be marketed and sold in most European countries and many other countries accepting CE approved devices. In December 2016, we received notification from the FDA that our 510(k) applications for marketing approval of the intra-articular device did not demonstrate that the device was as safe and effective as a legally marketed device. The original 510-k filed with FDA expired in January 2019. We intended to submit a new 510(k) application in 2019 that we believe would demonstrate substantial equivalency; however, we did not complete this process in 2019 due to a lack of funding. The 2020 -2021 COVID - 19 Pandemic has substantially reduced access to many medical facilities for further research projects and as such, the Company has curtailed any further regulatory effort on this device. We cannot provide assurances that we will receive FDA clearance for our intra-articular device.

Cosmetic Botulinum Injection Device

The American Society of Plastic Surgeons (ASPS) reported that among the 14.2 million cosmetic minimally-invasive procedures performed in 2015, the top performed procedure, at 6.7 million procedures, was Botulinum Toxin Type A (commonly known as Botox) injection. Leveraging our experience in minimizing the pain of dental anesthetic injections, we established a joint venture in 2014 to develop and commercialize a device for the pain free injection of botulinum toxin.

The joint venture entity, Milestone Advanced Cosmetic Systems, Inc., was originally owned 50% by us and 50% by Milestone China Company Limited (“Milestone China”), a company organized under the laws of Hong Kong and owned 40% by Milestone Scientific. Milestone China contributed $900,000 of cash to the joint venture, and we have provided a royalty-free license to utilize our technology to the joint venture to develop a botulinum toxin injection device.

In May 2020, Milestone Scientific finalized an agreement for the purchase of Milestone China’s 50% interest in Advanced Cosmetic Systems Inc., for the forgiveness of $900,000 in accounts receivable owed by Milestone China to Milestone Scientific (and previously fully reserved for), resulting in a noncash transaction. Milestone China will have the option to repurchase the 50% interest in Advanced Cosmetic Systems within one year from the sale date for $900,000 in cash. As a result of the purchase Milestone Scientific will own 100% of Advanced Cosmetic Systems Inc. at the expiration of the option period.

In November 2017, we announced plans for the commercial launch of our proprietary cosmetic injection device using our DPS Dynamic Pressure Sensing technology platform and our CompuFlo Cosmetic System for delivery of botulinum toxin. Our proprietary cosmetic injection device features improved needle placement with a comfortable stylus grip, precise dosing, the same technology platform that has made dental and epidural injections painless, and a new, intuitive touch-screen interface. Although the Company received positive outcomes of multi-state human factor studies with targeted customers, the Company did not have the necessary capital to move forward with the commercial launch of our cosmetic device and applying for marketing clearance in Europe (CE clearance), and United States (FDA clearance).

The Wand STA System

In 2006, we received FDA clearance for our Wand/STA System and disposable handpiece, the first system utilizing CompuFlo’s DPS Dynamic Pressure Sensing Technology, for use in the dental market. The Wand/STA System and handpiece continue to provide all of the benefits of the CompuDent System, allowing dentists to provide virtually painless injections for all dental procedures, including routine fillings, as well as more sophisticated implants, root canals and crowns, while better facilitating single tooth anesthesia (now generally performed with a high-pressure spring-loaded gun-like device), but also incorporates the "pressure feedback" elements of Milestone Scientific's patented CompuFlo’s DPS Dynamic Pressure Sensing Technology, thereby allowing dentists to administer injections accurately and painlessly into the periodontal ligament space, effectively anesthetizing a single tooth. Injections made by the Wand/STA System eliminate collateral numbness of the tongue, lips and facial muscles and often hasten the onset of anesthesia by eliminating the need for mandibular blocks. The Wand/STA also identifies intrafilamentary tissue, so dentists can find the precise location for single tooth anesthesia. This injection is of significant value in that it allows the dentist to profoundly anesthetize the tooth within one minute per root, versus up to 15-18 minutes for a block injection to take effect. The Wand /STA System can perform all the injections that can be done with a conventional dental syringe, and in addition, we provide the ability to perform the following: the palatal-anterior superior alveolar, anterior middle superior alveolar and inferior alveolar nerve block. The Wand/ STA System achieves these injections predictably and reliably. To date, substantially all our revenue has been generated by the Wand/STA System for dental applications.

Since its market introduction in the spring of 2007, the Wand/STA System has received favorable reviews and awards from the dental industry. In July 2007, noted industry publication Dentistry Today featured the Wand/STA System as one of the “Top 100 Products in 2007", helping to promote much broader recognition of the instrument and validating the Wand/STA System’s value proposition for dentists and patients, alike.

In early 2008, Medical Device & Diagnostic Industry magazine distinguished the Wand/STA System as a 2008 Medical Design Excellence Award winner in the “Dental Instruments, Equipment and Supplies” product category. Of the 33 products to receive this coveted award, the Wand/STA System was one of only two winning products that serve dental practitioners.

In December 2008, Milestone Scientific continued to win broad acclaim for the Wand/STA System by winning a “Townie Choice Award”. The “Townie Choice” awards were originally started by Dr. Howard Darran and Farran Media, publisher of Dentaltown Magazine, to assist dentists in making product purchasing decisions, and are considered the “people’s choice” of the products and services available to the dental industry today. That same month, the Wand/STA System was also named as a Dental Products Report “Top 100 2008 Product of Distinction”. Additionally, the Wand/STA System was named one of Dentistry Today’s “Top 100 Products” for the third consecutive year in 2010.

Other Possible Products

Using CompuFlo’s DPS Dynamic Pressure Sensing Technology for less painful injections for use in rhinoplasty, colorectal surgery, podiatry, and other disciplines are under review. In the self-injectable market, there are many injectable drugs routinely self-administered in a home or office setting using spring loaded automatic injection devices by people who suffer from long term chronic conditions such as multiple sclerosis, rheumatoid arthritis, and other diseases of the auto immune system. We believe CompuFlo’s DPS Dynamic Pressure Sensing Technology, using pressure sensing capabilities, can serve as a less painless subcutaneous injection method for these self-administered drugs.

However, there can be no assurance that we will be able to successfully develop any such products, or that if developed, that we will be able to obtain FDA approval to market any such products, or even if we do obtain such FDA approval, that any such products will generate any revenue for us or be a commercial success.

Distribution and Marketing Arrangements

Our dental devices are certified to sell in the United States, US territories, Canada and in 60 other countries abroad. In June 2017, we received FDA regulatory clearance to sell our first medical device, the CompuFlo Epidural Computer Controlled Anesthesia System in the United States. Since receiving FDA clearance in 2017, our epidural devices have had minimal sales in the United States.

Dental Market

Beginning January 1, 2016, Milestone Scientific entered into a non-exclusive distribution agreement with Henry Schein, Inc. (“Henry Schein”). In June 2016, that agreement was replaced with an exclusive distribution arrangement for our dental products for the United States and Canada with Henry Schein. Under this arrangement we have a semi-dedicated independent sales force visiting dentists.

In December 2020, the Exclusive Distribution Arrangement with Henry Schein was replaced with a non-exclusive distribution arrangement. Under the non-exclusive arrangement, Henry Schein will purchase dental instruments and handpieces in the United States and Canada.

Beginning in January 2021, the Company began a process of signing non-exclusive dental distribution arrangements with dental distributors in specific geographical locations in the United States and Canada. To date there are eight (8) new non-exclusive dental distributors engaged in the USA and Canada. The goal is to add an additional non-exclusive distributor in three main cities in the USA.

The goal of changing our marketing plan from a sole exclusive distributor in the USA and Canada, to a large number of non-exclusive distributors is to increase placement of our Wand/STA instrument and thus the expansion of our dental disposables.

On the global front, we have granted exclusive marketing and distribution rights for the Wand/STA Instrument to select dental suppliers in various international regions in Asia, Africa, South America, and Europe. They include FM Produkty Dla Stomatologii in Poland and Unident AB in the countries of Denmark, Sweden, Norway, and Iceland. Additionally, the Company is in the process of evaluating current international distributors and adding new distributors, globally as required based on the economics of the region.

In first quarter 2020, Milestone China and certain marketing affiliates entered into a plan to merge (the Transaction) into an affiliated manufacturing company, Anhui Maishida Medical Technology, Co. Ltd. (Anhui). Anhui will be the surviving entity after the merger and will have complete responsibility for sales, marketing, and distribution for the Company’s dental products in China. However, as of the filing date of this Quarterly Report, due to the COVID-19 Pandemic, the regulatory documentation for the planned merger has been placed in suspense since applicable government offices are still closed in China and Hong Kong. After completion of the Transaction, Milestone Scientific is expected to have an approximate 28.4% direct ownership in Anhui. Milestone China and certain marketing affiliates are expected to be dissolved upon completion of the merger and upon the required regulatory filings in China and Hong Kong.

Medical Market

In September 2014, Milestone Medical received CE clearance to distribute its epidural and intra-articular devices in the European Community (EU). Milestone Medical signed a distribution agreement in March 2015 with a medical distributor in Poland for the distribution of the epidural instrument. This distribution agreement was terminated in late 2016 due to the distributor’s inadequate performance under the distribution agreement. Milestone Medical is continuing to pursue distributors for the instrument in the EU community.

During 2016, Milestone Scientific filed for 510(k) marketing clearance with the U.S. Food and Drug Administration (FDA) for both intra-articular and epidural injections with the CompuFlo System. In June 2017, the FDA approved the CompuFlo System for epidural injections. Beginning in 2020 Milestone Scientific began the process of building an internal sales force to market our epidural instrument to medical schools, hospitals and individual anesthesiologists within the United States and foreign markets. Milestone Scientific’s immediate focus is on marketing its epidural device throughout the United States and Europe.

In December 2016, we received notification from the FDA that based upon the 510(k)-application submitted for intra-articular injections, we did not adequately document that the device met the equivalency standard required for 510(k) clearances. Following consultation with the FDA’s Office of Device Evaluation, we filed a new 510(k) application for the device in June 2018. In November 2018, the FDA provided Milestone Scientific with a list of questions on the intra-articular 510(k) application filed in June 2018. Due to the delay in responding to FDA questions, Milestone Scientific will be required to file a new 510(k) application. Milestone Scientific did not complete this process in 2019, due to a lack of funding. In 2020 raised gross proceeds approximately $19.7 million (in two capital raises) and is in the process of evaluating the use of these funds to improve existing devices, develop new instruments, including the continued regulatory process for the intra-articular instrument.

We cannot provide assurances that funds will be allocated, to fund the FDA clearance process for our intra-articular device.

In April 2019, Milestone Scientific entered an Agreement with American 3B Scientific, a leading supplier of didactic material for education, for the development and sale of a CompuFlo® Epidural Training Instrument. This instructional instrument utilizes the pressure sensing technology and will be utilized as a training instrument to improve epidural placement success. The first sale of this new medical instrument occurred in May 2019, for three instruments and three disposable kits.

We have entered into a limited number of distributor arrangements in Europe and the Middle East for our CompuFlo Epidural System. Our distribution strategy is initially aimed at having key opinion leaders (KOLs)

use and accept the device and initiates their own studies.

Patents and Intellectual Property

Milestone Scientific and its subsidiaries currently hold approximately 188 U.S. and foreign patents, and many patent applications. The Company’s patents and patent applications relate to drug delivery methodologies, drug flow rate measurement, pressure/force computer-controlled drug delivery with exit pressure, dynamic pressure sensing, automated rate control, automated charging, drug.

profiles, audible and visual pressure/force feedback, tissue identification, drug delivery injection unit, drug drive unit for anesthetic, handpiece, and injection device. Milestone Scientific and its subsidiaries also currently hold approximately 36 registered U.S. and foreign trademarks, including CompuDent®, CompuFlo®, DPS Dynamic Pressure Sensing technology®, Safety Wand®, STA Single Tooth Anesthesia System®, and The Wand®

Milestone Scientific relies on a combination of patent, copyright, trade secret and trademark laws and employee and third-party non-disclosure agreements to protect its intellectual property rights. Despite the precautions taken by Milestone Scientific to protect products, unauthorized parties may attempt to reverse engineer, copy, or obtain and use products and information that Milestone Scientific regards as proprietary, or may design products serving similar purposes that do not infringe on Milestone Scientific’s patents. Milestone Scientific’s failure to protect its proprietary information and the expenses of doing so could have a material adverse effect on our business, financial condition, and results of operations.

If Milestone Scientific’s products infringe upon patent or proprietary rights of others, we may be required to modify processes or to obtain licenses. There can be no assurance that Milestone Scientific would be able to do so in a timely manner, upon acceptable terms and conditions, or at all. The failure to do so could have a material adverse effect on our business, financial condition, and results of operations.

Manufacturing

Milestone Scientific has informal arrangements with an US manufacturer of the Wand/STA System, epidural and intra-articular devices. Pursuant to these informal arrangements, our third-party manufacturers manufacture the Wand/STA System under specific purchase orders without minimum purchase commitments, and at prices to be agreed upon in each such purchase order.

Our agreement with the principal manufacturer of dental handpieces, a related party, includes pricing terms. Milestone Scientific has been supplied by the manufacturer of the Wand/STA System and its predecessor, the CompuDent System, since the commencement of production in 1998, and by the manufacturer of its dental handpieces since 2003. The manufacturer of our dental handpieces is in the People’s Republic of China and the manufacturer of the Wand/STA System is in the United States. Refer to Item 1A. Risk Factors.

Changes to pricing of the Wand/STA System by the manufacturer could have a material adverse effect on our financial condition, business, and results of operations. Termination of the manufacturing relationship with any of these third-party manufacturers could significantly and adversely affect our ability to produce and sell the products. Though other alternate sources of supply for dental handpieces exist, Milestone Scientific would need to establish relationships with new suppliers, and with respect to the Wand/STA System recover its existing tools or have new tools produced and “burn in” and other manufacturing and quality control software re-produced. Establishing new manufacturing relationships could involve significant expense and delay. Any curtailment or interruptions of supply, whether as a result of the inability of a supplier to meet our product delivery needs or termination of the relationship, would have a material adverse effect on our financial condition, business, and results of operations.

Competition

As of this filing, there is no subcutaneous drug delivery platform or device on the market regulating the flow rate and pressure of an injection capable of delivering a painless injection at the desired location like Milestone Scientific’s proprietary, patented devices having our DPS Dynamic Pressure Sensing technology.

Milestone Scientific’s devices compete based on their performance characteristics and the benefits provided to the patient, practitioner, and their business operations. Clinical studies have shown that our devices reduce fear, pain and anxiety for many patients, and Milestone Scientific believes that they can reduce practitioner stress levels, as well. Other computer-controlled local anesthesia delivery (C-CLAD) options are the Quicksleeper and SleeperOne, from Dental Hi Tec, Dentapen from Septodant, the Calajet from Aseptico, and the Comfort Control Syringe by Dentsply.

The Quicksleeper was invented in France by Dr. Alain Villette in 1991. It is marketed as the only local anesthetic delivery device in France that allows the ability to perform all intraoral local anesthetic injection techniques, including osteocentral anesthesia, quickly and without failure. The extra feature that gives the Quicksleeper this ability is a built-in motor in the syringe/handpiece that renders the syringe both an injector and a perforator of bone. That is, the handpiece of the Quicksleeper can perform an intraosseous injection via a motor driven perforation of the cortical plate of bone. A standard dental needle that attaches to the syringe spins as the motor rotates the handpiece thus acting as a perforator. However, the handpiece is relatively heavy, weighing 240 g. as compared to a standard syringe that weighs 80 g. Injection speed increases during the injection, but the operator cannot control when the injection speed increases.

The Calajet instrument, manufactured in Europe, has been very slow to grow market acceptance. It recently began marketing in the United States with similar slow acceptance. The instrument is a higher price than the Wand STA and does not provide dynamic pressure sensing technology. Although a competitor, we believe that without a substantial distribution network this instrument will have a difficult time to be successful in the USA.

The Dentapen from Septodent is the newest competitor in the market. This device is manufactured in Europe and began marketing in the USA in 2018. This device is priced similar to the Wand/STA device, but at this time, to our knowledge, it is slow to attract viable distribution in the USA.

Milestone Scientific’s proprietary, patented devices with its DPS Dynamic Pressure Sensing Technology platform also compete with disposable and reusable syringes that generally sell at lower prices and that use established and well-understood methodologies in both the dental and medical marketplaces.

Rapid technological change and research may affect our products. Current or new competitors could, at any time, introduce new or enhanced products with features that render our products less marketable or even obsolete. Therefore, Milestone Scientific must devote substantial efforts and financial resources to improve existing products, bring products to market quickly, and develop new products for related markets. In addition, the ability to compete successfully requires that Milestone Scientific maintain an effective distribution network with a strong marketing plan. Any new products must comply with applicable regulatory authorities before they may be marketed. Milestone Scientific cannot assure that it can compete successfully, that competitors will not develop technologies or products that render our products less marketable or obsolete, or, that Milestone Scientific will succeed in improving its existing products, effectively develop new products, or obtain required regulatory approval for those products.

Government Regulation

The manufacture and sale of medical devices and other medical products are subject to extensive regulation by the FDA pursuant to the U.S. Food, Drug and Cosmetic Act (“FD&C Act”), and by other federal, state, and foreign authorities. Under the FD&C Act, medical devices must receive FDA clearance before they can be marketed commercially in the United States. Some medical products must undergo rigorous pre-clinical and clinical testing and an extensive FDA approval process before they can be marketed.

These processes can take many years and require the expenditure of substantial resources. The time required for completing such testing and obtaining such approvals is uncertain, and FDA clearance may never be obtained. Delays or rejections may be encountered based upon changes in FDA policy during the period of product development and FDA regulatory review of each product submitted. Similar delays also may be encountered in other countries. Following the enactment of the Medical Device Amendments to the U.S. Food, Drug and Cosmetic Act in May 1976, the FDA classified medical devices in commercial distribution into one of three classes. This classification is based on the controls necessary to reasonably ensure the safety and effectiveness of the medical devices. Class I devices are those devices whose safety and effectiveness can reasonably be ensured through general controls, such as adequate labeling, pre-market notification, and adherence to the FDA’s Quality System Regulation (“QSR”), also referred to as “Good Manufacturing Practices” (“GMP”) regulations. Some Class I devices are further exempted from some of the general controls. Class II devices are those devices whose safety and effectiveness reasonably can be ensured using special controls, such as performance standards, post-market surveillance, patient registries, and FDA guidelines. Class III devices are those which must receive pre-market approval by the FDA to ensure their safety and effectiveness. Generally, Class III devices are limited to life-sustaining, life-supporting or implantable devices.

Pre-market Notification, the manufacturer or distributor may not place the device into commercial distribution until an order is issued by the FDA. By regulation, the FDA has no specific time limit by which it must respond to a 510(k) Pre-market Notification. Currently, the FDA typically responds to the submission of a 510(k) Pre-market Notification within 180 days. The FDA response may declare that the device is substantially equivalent to another legally marketed device and allow the proposed device to be marketed in the United States. However, the FDA may determine that the proposed device is not substantially equivalent or may require further information, such as additional test data, before the FDA is able to decide regarding substantial equivalence. Such determination or request for additional information could delay market introduction of products. If a device that has obtained 510(k) Pre-market Notification clearance is changed or modified in design, components, method of manufacture, or intended use, such that the safety or effectiveness of the device could be significantly affected, separate 510(k) Pre-market notification clearance must be obtained before the modified device can be marketed in the United States. If a manufacturer or distributor cannot establish that a proposed device is substantially equivalent to a legally marketed device, the manufacturer or distributor will have to seek pre-market approval of the proposed device, a more difficult procedure requiring extensive data, including pre-clinical and human clinical trial data, as well as extensive literature to prove the safety and efficacy of the device.

The FDA cleared the Wand, our CompuDent System, and its disposable handpieces, for marketing in the United States for dental applications in July 1996; the CompuMed® System for marketing in the United States for medical applications in May 2001; the Safety Wand® for marketing in the United States for dental applications in September 2003; the Wand/STASystem for dental applications in August 2006; and our CompuFlo Epidural System in June 2017. For us to commercialize other products in the United States, Milestone Scientific would have to submit and have cleared additional 510(k) applications to the FDA.

In 2017, the FDA reduced the barrier to marketing clearance for certain dental devices. As a result, other manufacturers of injection devices could more easily enter the dental market. However, we believe that any new device will be very limited in sales volume without a significant distributor in the dental market.

Though certain dental and medical devices have received FDA marketing clearance, there can be no assurance that any of the other medical devices under development will obtain the required regulatory clearance in a timely manner, or at all. If regulatory clearance of a product is granted, such clearance may entail limitations on the indicated uses for which the product may be marketed. In addition, modifications may be made to the products to incorporate and enhance their functionality and performance based upon new data and design review. There can be no assurance that the FDA will not request additional information relating to product improvements; that any such improvements would not require further regulatory review, thereby delaying the testing, approval, and commercialization of product improvements; or that ultimately any such improvements will receive FDA clearance.

Compliance with applicable regulatory requirements is subject to continual review and is monitored through periodic inspections by the FDA. Later discovery of previously unknown problems with a product, manufacturer or facility may result in restrictions on such product or manufacturer, including fines, delays or suspensions of regulatory clearances, seizures or recalls of products, operating restrictions, and criminal prosecution.

Milestone Scientific is subject to pervasive and continuing regulation by the FDA, whose regulations require manufacturers of medical devices to adhere to certain QSR requirements as defined by the FD&C Act. QSR compliance requires testing, quality control and documentation procedures. Failure to comply with QSR requirements can result in the suspension or termination of production, product recall or fines and penalties. Products also must be manufactured in registered establishments. In addition, labeling and promotional activities are subject to scrutiny by the FDA and, in certain circumstances, by the Federal Trade Commission. The export of devices is also subject to regulation in certain instances.

The Medical Device Reporting (“MDR”) regulation obligates us to provide information to the FDA on product malfunctions or injuries alleged to have been associated with the use of the product or in connection with certain product failures that could cause serious injury. If, because of FDA inspections, MDR reports or other information, the FDA believes that Milestone Scientific is not in compliance with the law, the FDA can institute proceedings to detain or seize products, enjoin future violations, or assess civil and/or criminal penalties against us, our officers, or employees. Any action by the FDA could result in disruption of operations for an undetermined amount of time.

In September 2014 we received CE mark approval for the marketing of the CompuFlo Epidural System, allowing such product to be marketed in most European countries and many other countries accepting CE approved devices.

In April 2017, Milestone Scientific obtained regulatory approval to sell the CompuFlo Epidural System and its handpieces in Australia. As of May 2014, the Wand/STA System was approved for sale in China. In March 2018, Milestone Scientific obtained regulatory approval to market the CompuFlo Epidural System in Canada.

Human Capital

As of December 31, 2020, the Company had a total 19 full-time employees including three executive officers of Milestone Scientific. Milestone Scientific also has a consultant who serves as a Director of Clinical Affairs. None of our employees are subject to a collective bargaining agreement and we believe our employee relations are good. The Company currently does not have any official training programs or performance evaluations for its employees.

Corporate Information

We were organized in August 1989 under the laws of the State of Delaware. Our principal executive office is located at 425 Eagle Rock Avenue, Roseland, New Jersey 07068. Our telephone number is (973) 535-2717.

Item 1A. Risk Factors

The following factors may affect the growth and profitability of Milestone Scientific and should be considered by any prospective purchaser or current holder of our securities. Our business, financial condition, results of operations and stock price could be materially adversely affected by any of these risks.

We have a history of operating losses that are expected to continue, and we are unable to predict the extent of future losses, whether we will generate significant revenues or whether we will achieve or sustain profitability.

We are a small, non-diversified medical device company with a history of limited revenue and significant operating losses and our prospects must be evaluated considering the uncertainties, risks, expenses, and difficulties frequently encountered by similarly situated companies. With only one exception (i.e., 2013), we have generated net losses in all periods since the commencement of our operations, including operating losses of approximately $7.4 million and $7.6 million for the years ended December 31, 2020 and 2019, respectively. Overall, at December 31, 2020, we had an accumulated deficit of approximately $100.9 million. We expect to make substantial expenditures and incur increasing operating costs in the future and our accumulated deficit will increase significantly as we undertake to commercialize our CompuFlo Epidural System. Our losses have had, and are expected to continue to have, an adverse impact on our working capital, total assets, and stockholders' equity. Because of the risks and uncertainties associated with product acceptance, we are unable to predict the extent of any future losses, whether we will ever generate significant revenues or if we will ever achieve or sustain profitability.

The COVID-19 pandemic is adversely affecting the Company’s business currently. Additional factors could exacerbate such negative consequences and/or cause other materially adverse effects.

The COVID-19 pandemic did materially adversely affect the Company’s financial results and business operations in theCompany’s fiscal year ended December 31, 2020, while economic and health conditions in the United States and across most of the globe have continued to change rapidly since the end of the year. In the short-term, demand for the Company’s dental products is showing an increase in sell through activity to dental offices. However the change in demand may or may not continue and/or demand may or may not increase from historical levels depending on the duration and severity of the COVID-19 pandemic, the length of time it takes for normal economic and operating conditions to resume, additional governmental actions that may be taken and/or extensions of time for restrictions that have been imposed to date, and numerous other uncertainties. Such events may result in business and manufacturing disruption, inventory shortages, delivery delays, and reduced sales and operations, any of which could materially affect our business, financial condition, and results of operations.

The ability of the Company’s employees to work may be significantly impacted by the coronavirus.

The Company’s employees are being affected by the COVID-19 pandemic. The majority of our office and management personnel are working remotely. The health of the Company’s workforce is of primary concern and the Company may need to enact further precautionary measures to help minimize the risk of our employees being exposed to the coronavirus. Further, our management team is focused on mitigating the adverse effects of the COVID-19 pandemic, which has required and will continue to require a large investment of time and resources across the entire Company, thereby diverting their attention from other priorities that existed prior to the outbreak of the pandemic. If these conditions worsen, or last for an extended period of time, the Company’s ability to manage its business may be impaired, and operational risks, cybersecurity risks and other risks facing the Company even prior to the pandemic may be elevated. The COVID-19 pandemic is affecting the Company’s customers, suppliers, vendors, and other business partners, but the Company is not able to assess the full extent of the current impact nor predict the ultimate consequences that will result therefrom.

The full effects of the COVID-19 pandemic are highly uncertain and cannot be predicted.

The COVID-19 pandemic affected the Company’s operations in 2020 and the first quarter of 2021 and may continue to do so for the rest of 2021. All of these factors may have far reaching impacts on the Company’s business, operations, and financial results and conditions, directly and indirectly, including without limitation impacts on the health of the Company’s management and employees, manufacturing, distribution, marketing, and sales operations, customer, and consumer behaviors, and on the overall economy. The scope and nature of these impacts, most of which are beyond the Company’s control, continue to evolve and the outcomes are uncertain. Management cannot predict the full impact of the COVID-19 pandemic on the Company’s sales channels, supply chain, manufacturing, and distribution nor to economic conditions generally. The ultimate extent of the effects of the COVID-19 pandemic on the Company is highly uncertain and will depend on future developments, and such effects could exist for an extended period of time even after the pandemic might end.

We require additional funding and may be unable to raise capital when needed, which may force us to delay, curtail or eliminate commercialization efforts of our CompuFlo Epidural Computer Controlled Anesthesia System.

Our operations have consumed substantial amounts of cash since inception. During the years ended December 31, 2020 and 2019, net cash flow used in operations was approximately $6.9 million and approximately $1.8 million, respectively. We expect to continue to spend substantial amounts on commercialization and marketing activities, including the continued commercialization and marketing of our FDA-approved CompuFlo Epidural Computer Controlled Anesthesia System. Until such time, if ever, as we can generate a sufficient amount of product revenue and achieve profitability, we expect to seek to finance future cash needs through equity financings or corporate collaboration and licensing arrangements, and the sale of non-medical assets.

Raising additional capital by issuing securities or through licensing or lending arrangements may cause dilution to our existing stockholders, restrict our operations, or require us to relinquish proprietary rights.

To the extent that we raise additional capital by issuing equity securities, the share ownership of existing stockholders will be diluted. Any future debt financing may involve covenants that restrict our operations, including limitations on our ability to incur liens or additional debt, pay dividends, redeem our stock, make certain investments, and engage in certain merger, consolidation, or asset sale transactions, among other restrictions. In addition, if we raise additional funds through licensing arrangements or the disposition of any of our assets, it may be necessary to relinquish potentially valuable rights to our product candidates or grant licenses on terms that are not favorable to us.

Business interruptions, including any interruptions resulting from COVID-19, could significantly disrupt our operations and could have a material adverse impact on our business.

Business interruptions, including any interruptions resulting from COVID-19, could significantly disrupt our operations and could have a material adverse impact on our business. All of our employees are located in the U.S. In addition to our employees, we rely on (i) distributors, agents, and third-party logistics providers in connection with product sales and distribution and (ii) raw material and component suppliers in the U.S., Europe, and China. If we, or any of these third-party partners encounter any disruptions to our or their respective operations or facilities, or if we or any of these third-party partners were to shut down for any reason, including by fire, natural disaster, such as a hurricane, tornado or severe storm, power outage, systems failure, labor dispute, pandemic, or other unforeseen disruption, then we or they may be prevented or delayed from effectively operating our or their business, respectively.

Relying exclusively on third parties to manufacture our products, changes in our informal manufacturing arrangements made by the manufacturer of our products and disruptions at the manufacturing facility of our manufacturers and failure to maintain existing supply relationships exposes us to risks that may harm our business.

We have limited internal experience in manufacturing operations and have not historically established our own manufacturing facilities. We currently lack the internal resources to manufacture any of our products, including our CompuFlo® Epidural Computer Controlled Anesthesia System.

Milestone Scientific has been supplied by the manufacturer of the Wand/STA System and its predecessor, the CompuDent System, since the commencement of production in 1998, and by the manufacturer of its handpieces since 2003. The manufacturer of our handpieces is in the People’s Republic of China and the manufacturer of the Wand/STA System is in the United States. At present, we have an informal arrangement with certain manufacturers of our products. We have one manufacturer of the handpieces for our devices which is under a long-term contract. We have a single manufacturer manufacturing our devices. Our current arrangement with our manufacturers is on a purchase order by purchase order basis. As a result, we do not have price protection or a supply commitment for our devices or handpieces. If either manufacturer insists on a material change in terms or determines to discontinue manufacture of our products, it could have an adverse effect on our financial condition and results of operation.

An operational disruption in the facility of the manufacturer of or their ability to ship our handpieces or devices could negatively impact our financial results. The occurrence of a natural disaster, such as a hurricane, tropical storm, earthquake, tornado, severe weather, flood, fire, or epidemic, pandemic, or other health emergency, or other unanticipated problems such as labor difficulties, equipment failure or unscheduled maintenance, in each case could cause operational disruptions of varied duration.

These types of disruptions could materially adversely affect our financial condition and results of operations to varying degrees dependent upon the facility, the duration of the disruption, our ability to shift business to another facility or find alternative sources of supply. Any losses due to these events may not be covered by our existing insurance policies or may be subject to certain deductibles. Given our current manufacturing relationships, it is possible that our manufacturing requirements may exceed the available supply allotments under our existing agreements. Our anticipated future reliance on third-party manufacturers exposes us to the following additional risks:

We may be unable to identify manufacturers on acceptable terms or at all because the number of potential manufacturers is limited, and the FDA must approve any replacement contractor. This approval would require new testing and compliance inspections. In addition, a new manufacturer would have to develop substantially equivalent processes for production of our products.

Though other alternate sources of supply for dental handpieces exist, Milestone Scientific would need to establish relationships with new suppliers, and with respect to the Wand/STA System recover its existing tools or have new tools produced and “burn in” and other manufacturing and quality control software re-produced. Establishing new manufacturing relationships could involve significant expense and delay.

Each of these risks could delay the commercialization of our CompuFlo Epidural Computer Controlled Anesthesia System, limit our available supply of The Wand/ STA for dental applications, cause damage to our reputation, result in higher costs and/or deprive us of potential product revenues. Any curtailment or interruptions of the supply, whether as a result of termination of the relationship or otherwise, would have a material adverse effect on our financial condition, business, and results of operations.

Our business is exposed to risks associated with the economic, environmental, and political conditions in China because the sole manufacturer of our handpieces is located in China.

Because the sole manufacturer of our dental handpieces is located is located in China, our business is disproportionately exposed to the economic, environmental, and political conditions of the region. China’s political and economic systems are very different from most developed countries in many respects, including, the amount of government involvement, the level of development, the control of foreign exchange and the allocation of resources. Uncertainties may arise with changing governmental policies and measures. China also faces many social, economic, and political challenges that may produce instabilities in both its domestic arena and in its relationship with other countries.

Risks related to Human Capital Management

We may not be able to attract and retain qualified employees.

Our future success depends upon the continued service of our executive officers and other key management and technical personnel, and on our ability to continue to identify, attract, retain, and motivate them. Implementing our business strategy requires specialized territory managers and other talent, as our revenues are highly dependent on technological and product innovations. The market for employees in our industry is extremely competitive, and competitors for talent. A number of such competitors for talent are significantly larger than us and are able to offer compensation in excess of what we are able to offer. Further, existing immigration laws make it more difficult for us to recruit and retain highly skilled foreign national graduates of universities in the United States, making the pool of available talent even smaller. If we are unable to attract and retain qualified employees, our business may be harmed.

These instabilities may significantly and adversely affect our supply of dental handpieces which would in turn adversely affect our financial performance. In addition, as the Chinese legal system develops, there can be no assurance that changes in laws and regulations and their interpretation or their enforcement will not have a material adverse effect on our business relationship with the sole manufacturer of our dental handpieces. Any adverse change in the economic, environmental and political conditions in China could have a material adverse effect on economic growth and the level of investments and availability of capital in China, which in turn could lead to a reduction in the supply of our dental handpieces and consequently have a material adverse effect on our businesses.

Issues with product quality could have a material adverse effect upon our business, subject us to regulatory actions and cause a loss of customer confidence in us or our products.

In general, our success depends upon the quality of our products. Quality management plays an essential role in meeting customer requirements, preventing defects, improving our products and services, and assuring the safety and efficacy of our products. Our future success depends on our ability to maintain and continuously improve our quality management program. A quality or safety issue may result in adverse inspection reports, warning letters, product recalls or seizures, monetary sanctions, injunctions to halt manufacture and distribution of products, civil or criminal sanctions, costly litigation, refusal of a government to grant approvals and licenses, restrictions on operations or withdrawal of existing approvals and licenses. An inability to address a quality or safety issue in an effective and timely manner may also cause negative publicity, a loss of customer confidence in us or our current or future products, which may result in the loss of sales and difficulty in successfully launching new products.

If physicians do not accept nor use our CompuFlo Epidural System, our ability to generate revenue from sales will be materially impaired.

Although the FDA has cleared our application to begin marketing the CompuFlo Epidural System, this is no assurance that physicians, hospitals, clinics, and other health care providers will accept and use it. Acceptance and use of the CompuFlo Epidural System will depend on many factors including:

● cost-effectiveness of our product relative to competing products and systems;

● patient satisfaction;

Because we expect sales of the CompuFlo Epidural Computer Controlled Anesthesia System to generate substantially all our medical product revenues in the near-term, the failure of this product to find market acceptance would harm our business and could require us to seek additional financing or make such financing difficult to obtain on favorable terms, if at all.

Developments by competitors may render our products or technologies obsolete or non-competitive.

The medical device industry is intensely competitive and subject to rapid and significant technological change. We expect that other companies (or individuals), whether located in the United States or abroad, will pursue the development of alternative injection-based or imaging-based systems that will compete with our products. Many of these potential competitors have substantially greater capital resources, larger research and development staffs and facilities, longer product development history in obtaining regulatory approvals and greater manufacturing and marketing capabilities than we do. These companies also compete with us to attract qualified personnel and parties for acquisitions, joint ventures, or other collaborations. As a result, we may not be able to compete effectively against these companies or their products.

Developments by competitors may render our products or technologies obsolete or non-competitive.

Many of these potential competitors have substantially greater capital resources, larger research and development staffs and facilities, longer product development history in obtaining regulatory approvals and greater manufacturing and marketing capabilities than we do. These companies also compete with us to attract qualified personnel and parties for acquisitions, joint ventures, or other collaborations. As a result, we may not be able to compete effectively against these companies or their products.

If we are unable to adequately protect our patents, trade secrets and other proprietary rights, if our patents are challenged or if our provisional patent applications do not get approved, our competitiveness and business prospects may be materially damaged.

Intellectual property rights, including patents, trade secrets, confidential information, trademarks, trade names and trade address, are important to our business. We will endeavor to protect our intellectual property rights in key jurisdictions in which our products are produced or used and in jurisdictions into which our products are imported. Our success will depend to a significant degree upon our ability to protect and preserve our intellectual property rights. However, we may be unable to obtain or maintain protection for our intellectual property in key jurisdictions.

Although we own and have applied for patents and trademarks throughout the world, we may have to rely on judicial enforcement of our patents and other proprietary rights. Our patents and other intellectual property rights may be challenged, invalidated, circumvented, and rendered unenforceable or otherwise compromised. A failure to protect, defend or enforce our intellectual property could have an adverse effect on our financial condition and results of operations. Similarly, third parties may assert claims against us and our customers and distributors alleging our products infringe upon third party intellectual property rights.

We believe that the intellectual property underlying our products is a competitive advantage. We rely on a combination of patent rights, trade secrets and nondisclosure and non-competition agreements to protect our proprietary intellectual property, and we will continue to do so. There can be no assurance that our patents, trade secret policies and practices or other agreements will adequately protect our intellectual property. Our issued patents may be challenged, found to be over-broad or otherwise invalidated in subsequent proceedings before courts or the U.S. Patent and Trademark Office. Even if enforceable, we cannot provide any assurances that they will provide significant protection from competition. The processes, systems, and/or security measures we use to preserve the integrity and confidentiality of our data and trade secrets may be breached, and we may not have adequate remedies resulting from such breaches. In addition, our trade secrets may otherwise become known or be independently discovered by competitors. There can be no assurance that the confidentiality, nondisclosure and non-competition agreements with employees, consultants and other parties with access to our proprietary information to protect our trade secrets, proprietary technology, processes and other proprietary rights, or any other security measures relating to such trade secrets, proprietary technology, processes and proprietary rights, will be adequate, will not be breached, that we will have adequate remedies for any breach, that others will not independently develop substantially equivalent proprietary information or that third parties will not otherwise gain access to our trade secrets or proprietary knowledge. To the extent that our consultants, contractors, or collaborators use intellectual property owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions.

If we must take legal action to protect, defend or enforce our intellectual property rights, any suits or proceedings could result in significant costs and diversion of our resources and our management’s attention, and we may not prevail in any such suits or proceedings. A failure to protect, defend or enforce our intellectual property rights could have an adverse effect on our results of operations.

We could lose our market advantage earlier than expected.

We believe that our products represent a significant improvement over any existing drug delivery injection system in use today. However, this competitive advantage can evaporate quickly if we are not able to commercialize our products quickly. In the medical device industry, the majority of an innovative product’s commercial value is realized during the early stages of commercialization, before competing products are developed. Our market advantage is based, in part, on patent rights and the need for new competing products and systems to obtain regulatory approval before they can be commercialized. The scope of our patent rights may be limited and may also depend on the availability of meaningful legal remedies.

Our failure to adequately protect our intellectual property rights, through patents or otherwise, or limitations on the use or loss of such rights, could have a material adverse effect on our ability to prevent the commercialization of competing anesthetic delivery systems. In some countries, basic patent protections for our products may not exist because certain countries did not historically offer the right to obtain specific types of patents and/or we (or our licensors) did not file in those markets. In addition, the patent environment can be unpredictable, and the validity and enforceability of patents cannot be predicted with certainty.

Third parties could obtain patents that may require us to negotiate licenses to commercialize our technologies, and we cannot assure you that the required licenses would be available on reasonable terms or at all.

Third parties may claim that one or more aspects of our technologies or products may infringe on their intellectual property rights.

Our computer-controlled anesthesia systems are complex systems and numerous U.S. and foreign patents and pending patent applications owned by third parties exist in fields that relate to the development and commercialization of drug delivery systems. In addition, many companies have employed intellectual property litigation as a strategy to gain a competitive advantage. It is possible that infringement claims may occur as the number of products and competitors in our market increases. In addition, to the extent that we gain greater visibility and market exposure as a public company, we face a greater risk of being the subject of intellectual property infringement claims. We cannot be certain that the conduct of our business does not and will not infringe intellectual property or other proprietary rights of others in the U.S. and in foreign jurisdictions. If any of our computer-controlled anesthesia systems are found to infringe third party patent rights, we could be prohibited from manufacturing and commercializing the infringing technology unless we obtain a license under the applicable third-party patent and pay royalties or are able to design around such patent.

We may be unable to obtain a license on terms acceptable to us, or at all, and we may not be able to redesign the system to avoid infringement. Even if we can redesign our products or processes to avoid an infringement claim, our efforts to design around the patent could require significant time, effort and expense and ultimately may lead to an inferior or costlier product. Any claim of infringement by a third party, even those without merit, could cause us to incur substantial costs defending against the claim and could distract our management from our business. Furthermore, if any such claim is successful, a court could order us to pay substantial damages, including compensatory damages for any infringement, plus prejudgment interest and could, in certain circumstances, treble the compensatory damages and award attorney fees. These damages could be substantial and could harm our reputation, business, financial condition, and operating results. A court also could enter orders that temporarily, preliminary, or permanently prohibit us, our licensees, if any, and our customers from making, using, selling, offering to sell, or importing one or more of our products or using our proprietary technologies or processes, or could enter an order mandating that we undertake certain remedial activities. Any of these events could seriously harm our business, operating results, and financial condition.

We are exposed to the risks inherent in international manufacturing, sales, and operations.

In 2020, export sales outside of the United States made up approximately 60% of our total sales, and we sell our products to customers in approximately 40 countries and US territories. We have exposure to risks of operating in many foreign countries, including:

● unexpected changes in political or regulatory environments;

● political and economic instability;

● import and export restrictions and other trade barriers; and

● difficulties in obtaining approval for significant transactions.

Continued instability in the credit and financial markets may negatively impact our ability to commercialize our products.

Financial markets in the United States, Canada, Europe, and Asia continue to experience disruption, including, among other things, significant volatility in security prices, declining valuations of certain investments, as well as severely diminished liquidity and credit availability. Business activity across a wide range of industries and regions continues to be reduced. As a small medical device company, we rely on third parties for several important aspects of our business, including contract manufacturing of products, distribution of our products and sales and marketing. These third parties may be unable to satisfy their commitments to us due to tightening of global credit from time to time, which would adversely affect our business. The continued volatility in the credit and financial market conditions may also negatively impact our ability to access capital and credit markets and our ability to manage our cash balance. While we are unable to predict the continued duration and severity of any adverse conditions in the United States and other countries, any of the circumstances mentioned above could adversely affect our business, financial condition, operating results and cash flow or cash position.

Our ability to commercialize our products will depend in part on the extent to which reimbursement will be available from governmental agencies, health administration authorities, private health maintenance organizations and health insurers and other healthcare payers.

Our ability to generate revenues from our products will be diminished if the products sell for inadequate prices or hospitals or physicians are unable to obtain adequate levels of reimbursement for the cost they incur in connection with the use of the product. Significant uncertainty exists as to the reimbursement status of newly approved healthcare products. Healthcare payers, including Medicare, are challenging the prices charged for medical products and services. Government and other healthcare payers increasingly attempt to contain healthcare costs by limiting both coverage and the level of reimbursement for products. Insurance coverage may not be available, or reimbursement levels may be inadequate, to cover the charges for the use of such product. If government and other healthcare payers do not provide adequate coverage and reimbursement for any of our products, market acceptance of such product could be reduced. Prices in many countries, including many in Europe, are subject to local regulation and price controls. In the United States, where pricing levels for medical products, procedures and services are substantially established by third-party payors, including Medicare, if payors reduce the amount of reimbursement for a product, it may cause groups or individuals dispensing the product to discontinue use of the product, to substitute lower cost products even if the alternatives are less effective or to seek additional price-related concessions. These actions could have a negative effect on our financial results. The existence of direct and indirect price controls and pressures on our products could materially adversely affect our financial prospects and performance.

We are subject to substantial domestic and international government regulation, including regulatory quality standards applicable to our manufacturing and quality processes. Failure by us to comply with these standards could have an adverse effect on our business, financial condition, or results of operations.

The FDA regulates the approval, manufacturing and sales and marketing of many of our products in the United States. Significant government regulation also exists in other countries in which we conduct business. As a device manufacturer, we are required to register with the FDA and are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulation requirements, which require manufacturers of medical devices to adhere to certain regulations, including testing, quality control and documentation procedures. In addition, the federal Medical Device Reporting regulations require us to provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or, if a malfunction were to occur, could cause or contribute to a death or serious injury. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections by the FDA.

In the European community, we are required to maintain certain ISO certifications to sell our products and must undergo periodic inspections by notified bodies to obtain and maintain these certifications. Failure to comply with current governmental regulations and quality assurance guidelines could lead to temporary manufacturing shutdowns, product recalls or related field actions, product shortages or delays in product manufacturing. Efficacy or safety concerns, an increase in trends of adverse events in the marketplace, and/or manufacturing quality issues with respect to our products could lead to product recalls or related field actions, withdrawals, and/or declining sales.

We may be subject, directly, or indirectly, to U.S. federal and state health care fraud and abuse and false claims laws and regulations. Prosecutions under such laws have increased in recent years and we may become subject to such litigation. If we are unable to comply or have not fully complied with such laws, we could face substantial penalties.

Our operations are and will continue to be directly, or indirectly through our distributors, customers, and health care professionals, subject to various U.S. federal and state fraud and abuse laws, including, without limitation, the federal Anti-Kickback Statute, federal False Claims Act, and the Foreign Corrupt Practice Act of 1977 (“FCPA”). These laws may impact, among other things, our proposed sales, and marketing and education programs. The federal Anti-Kickback Statute prohibits persons from knowingly and willfully soliciting, offering, receiving, or providing remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual, or the furnishing or arranging for a good or service, for which payment may be made under a federal health care program such as Medicare or Medicaid. Several courts have interpreted the statute’s intent requirement to mean that if any one purpose of an arrangement involving remuneration is to induce referrals of federal health care covered business, the statute has been violated. The Anti-Kickback Statute is broad and, despite a series of narrow safe harbors, prohibits many arrangements and practices that are lawful in businesses outside of the health care industry. Penalties for violations of the federal Anti-Kickback Statute include criminal penalties and civil and administrative sanctions such as fines, imprisonment, and possible exclusion from Medicare, Medicaid, and other federal health care programs. An alleged violation of the Anti-Kickback Statute may be used as a predicate offense to establish liability pursuant to other federal laws and regulations such as the federal False Claims Act. Many states have also adopted laws like the federal Anti-Kickback Statute, some of which apply to the referral of patients for health care items or services reimbursed by any source, not only the Medicare and Medicaid programs.

The federal False Claims Act prohibits persons from knowingly filing, or causing to be filed, a false claim to, or the knowing use of false statements to obtain payment from, the federal government. Suits filed under the False Claims Act, known as “qui tam” actions, can be brought by any individual on behalf of the government and such individuals, commonly known as “relators” or “whistleblowers,” may share in any amounts paid by the entity to the government in fines or settlement. The frequency of filing qui tam actions has increased significantly in recent years, causing greater numbers of medical device, pharmaceutical and health care companies to have to defend False Claim Act actions. The Affordable Care Act includes provisions expanding the ability of certain relators to bring actions that would have been previously dismissed under prior law. When an entity is determined to have violated the federal False Claims Act, it may be required to pay up to three times the actual damages sustained by the government, plus civil penalties for each separate false claim. The Deficit Reduction Act of 2005 encouraged states to enact or modify their state false claims act to be at least as effective as the federal False Claims Act by granting states a portion of any federal Medicaid funds recovered through Medicaid-related actions. Most states have enacted state false claims laws, and many of those states included laws with qui tam provisions.

The Affordable Care Act includes provisions known as the Physician Payments Sunshine Act (section 6002), which require manufacturers of drugs, biologics, devices, and medical supplies covered under Medicare and Medicaid to disclose to the Centers for Medicare and Medicaid Services any transfers of value to physicians and teaching hospitals. Manufacturers must also disclose investment interests held by physicians and their family members. Failure to submit the required information may result in civil monetary penalties of up to $1 million per year for knowing violations and may result in liability under other federal laws or regulations.

Similar reporting requirements have also been enacted on the state level in the United States, and an increasing number of countries worldwide either have adopted or are considering similar laws requiring transparency of interactions with health care professionals. In addition, some states, such as Massachusetts and Vermont, impose an outright ban on certain gifts to physicians. These laws could affect our promotional activities by limiting the kinds of interactions we could have with hospitals, physicians or other potential purchasers or users of our products. Both the disclosure laws and gift bans will impose administrative, cost and compliance burdens on us. If we are found to be in violation of any of the laws described above and other applicable state and federal fraud and abuse laws, we may be subject to penalties, including civil and criminal penalties, damages, fines, or an administrative action of suspension or exclusion from government health care reimbursement programs and the curtailment or restructuring of our operations.

In addition, we are subject to the Foreign Corrupt Practices Act (“FCPA”) and other countries’ anti-corruption/anti-bribery regimes, such as the U.K. Bribery Act. The FCPA prohibits improper payments or offers of payments to foreign governments and their officials for obtaining or retaining business. Safeguards we implement to discourage improper payments or offers of payments by our employees, consultants, sales agents, or distributors may be ineffective, and violations of the FCPA and similar laws may result in severe criminal or civil sanctions, or other liabilities or proceedings against us, any of which would likely harm our reputation, business, results of operations and financial condition.

We may be subject to product liability claims that are not fully covered by insurance and that could put Milestone Scientific under financial strain.

Milestone Scientific could be subject to claims for personal injury from the alleged malfunction or misuse of the dental and medical products. While Milestone Scientific carries liability insurance that is believed to be adequate, there is no assurance that the insurance coverage will be sufficient to pay such claims should they be successful. A partially or completely uninsured claim, if successful and of significant magnitude, could have a material adverse effect on our business, financial condition, and results of operations.

Excessive returns under our Distribution and Supply Agreement with Henry Schein, Inc. could have a material adverse effect on our business, financial condition, and results of operations.

Under our Distribution and Supply Agreement with Henry Schein, Henry Schein has a right to return our products for full credit against the purchase price paid by them under limited circumstances in accordance with such agreement, including but not limited to, returns due to shipment error by us or factory defect. Excessive returns during any calendar year could have a material adverse effect on our business, financial condition, and results of operations.

Changes in laws and regulations over which we have no control can significantly affect our business and results of operations.

Any governmental entity that regulates our operations in the country in which they are located may enact new legislation or adopt new laws and regulations or policies at any time, and new judicial decisions may change the interpretation of existing legislation or regulations at any time in any of the countries in which our operations or projects are located. We have no control over any such changes. Any new laws or regulations governing our operations could have an adverse impact on our business, results of operations and prospects.

We rely on the continuing services of our Interim Chief Executive Officer and Director of Clinical Affairs.

We depend on the personal efforts and abilities of our Interim Chief Executive Officer and Director of Clinical Affairs. Milestone Scientific maintains a key man life insurance policy in the amount of $1,000,000 on the life of its Interim Chief Executive Officer. However, the loss of his services or the services of our Director of Clinical Affairs, on whom we maintain no insurance, could have a materially adverse effect on our business results of operations and prospects.

Milestone Scientific is effectively controlled by a limited number of stockholders.

Milestone Scientific’s principal stockholders, Leonard Osser, and Gian Domenico Trombetta beneficially own approximately 23% of the issued and outstanding shares of common stock. As a result, they can exercise substantial control over our affairs and corporate actions requiring stockholder approval, including electing directors, selling all or substantially all our assets, merging with another entity, or amending our certificate of incorporation. This control could delay, deter, or prevent a change in control and could adversely affect the price that investors might be willing to pay in the future for Milestone Scientific’s securities. In addition, because of the concentration of ownership of our shares of common stock, our stockholders may from time to time, observe instances where there may be less liquidity in the public markets for our securities.

Failure to implement effective internal controls required by the Sarbanes-Oxley Act of 2002 could result in material misstatements in our financial statements, cause investors to lose confidence in the Company’s reported financial information and have a negative effect on the trading price of our common stock.

Section 404 of the Sarbanes-Oxley Act of 2002 requires management of public companies to develop and implement internal controls over financial reporting and evaluate the effectiveness thereof. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of the Company’s annual and interim financial statements will not be prevented or detected on a timely basis. Any failure to complete the Company’s assessment of its internal controls over financial reporting or to remediate any material weaknesses that management may identify could harm the Company’s operating results, cause the Company to fail to meet its reporting obligations or result in material misstatements in the Company’s financial statements. Inadequate disclosure controls and procedures and internal controls over financial reporting could also cause investors to lose confidence in the Company’s public disclosures and reported financial information, which could have a negative effect on the trading price of our common stock.

The market price of our common stock may be volatile and may fluctuate in a way that is disproportionate to our operating performance.

Our stock price may experience substantial volatility because of many factors, including:

● our failure to meet analysts’ expectations.

● sales or potential sales of substantial amounts of our common stock;

● the success of our strategy to commercialize our CompuFlo Epidural System;

● developments concerning our licensors or product manufacturers;

● conditions in the medical device industry;

● governmental regulation and legislation;

● variations in our anticipated or actual operating results; and

Many of these factors are beyond our control. The stock markets in general, and the market for small, medical device companies have historically experienced extreme price and volume fluctuations. These fluctuations often have been unrelated or disproportionate to the operating performance of these companies. These broad market and industry factors could reduce the market price of our common stock, regardless of our actual operating performance.

Sales of a substantial number of shares of our common stock, or the perception that such sales may occur, may adversely impact the price of our common stock.

Almost all our 64,138,102 outstanding shares of common stock at December 31, 2020, as well as a substantial number of shares of our common stock underlying outstanding warrants, are available for sale in the public market, either freely or pursuant to Rule 144 under the Securities Act of 1933, as amended. In addition, we have an effective S-3 registration statement on file with the SEC covering the sale by us of up to $30 million of securities, including common stock, preferred stock, debt, convertible debt, and warrants. In February 2019 we issued 6,282,400 shares and 1,570,600 warrants to purchase common shares under our S-3 registration statement. During 2019 the Company issued 639,375 shares associated the warrants issued in February 2019. Since the year ended December 31, 2019, the Company issued 675,000 shares of common stock for warrants exercised at $0.50 for proceeds of $337,500. Additionally, in a private placement we issued 714,286 restricted common shares and 178,571 warrants to purchase common stock. Sales of a substantial number of shares of our common stock, or the perception that such sales may occur, may adversely impact the price of our common stock. In the second quarter of 2020, the Company completed two public offerings. In April 2020, a Common Stock offering generating gross proceeds of approximately $5.1 million (5,420,000 common shares and 2,710,000 warrants). The combined price of the shares and warrants was $0.95 per share. The warrants are exercisable at a price of $1.20 per share and have an expiration of three (3) years from the issue date. In June 2020, the Company completed a second Common Stock offering generating gross proceeds of approximately $14.6 million (6,770,000 common shares and 3,749,000 warrants). The combined price of the shares and warrants was $2.15 per share. The warrants are exercisable at $2.60 and expire three (3) years from the issue date.

We have never paid and do not intend to pay cash dividends in the foreseeable future. As a result, capital appreciation, if any, will be your sole source of gain.

We have never paid cash dividends on any of our capital stock and we currently intend to retain future earnings, if any, to fund the development and growth of our business. In addition, the terms of existing and future debt agreements may preclude us from paying dividends. As a result, capital appreciation, if any, of our common stock will be your sole source of gain for the foreseeable future.

Provisions in our certificate of incorporation, our by-laws and Delaware law might discourage, delay, or prevent a change in control of our company or changes in our management and, therefore, depress the trading price of our common stock.

Provisions of our certificate of incorporation, our by-laws and Delaware law may have the effect of deterring unsolicited takeovers or delaying or preventing a change in control of our company or changes in our management, including transactions in which our stockholders might otherwise receive a premium for their shares over then current market prices. In addition, these provisions may limit the ability of stockholders to approve transactions that they may deem to be in their best interests. These provisions include:

In addition, Section 203 of the Delaware General Corporation Law prohibits a publicly-held Delaware corporation from engaging in a business combination with an interested stockholder, generally a person which together with its affiliates owns, or within the last three years, has owned 15% of our voting stock, for a period of three years after the date of the transaction in which the person became an interested stockholder, unless the business combination is approved in a prescribed manner. The existence of the forgoing provisions and anti-takeover measures could limit the price that investors might be willing to pay in the future for shares of our common stock. They could also deter potential acquirers of our Company, thereby reducing the likelihood that you could receive a premium for your common stock in an acquisition.

If we fail to adhere to the strict listing requirements of NYSE American, we may be subject to delisting. As a result, our stock price may decline, and our common stock may be de-listed. If our stock were no longer listed on NYSE American, the liquidity of our securities likely would be impaired.

Our common stock currently trades on the NYSE American under the symbol “MLSS”. If we fail to adhere to NYSE American's strict listing criteria, including with respect to stock price, our market capitalization and stockholders’ equity, our stock may be de-listed. This could potentially impair the liquidity of our securities not only in the number of shares that could be bought and sold at a given price, which may be depressed by the relative illiquidity, but also through delays in the timing of transactions and the potential reduction in media coverage. As a result, an investor might find it more difficult to dispose of our common stock. Any failure at any time to meet the continuing NYSE American listing requirements could have an adverse impact on the value of and trading activity in our common stock.

Item 1B. Unresolved Staff Comments

None.

Item 2. Description of Property

The headquarters for Milestone Scientific are located at 425 Eagle Rock Avenue, Roseland, New Jersey 07068, and our telephone number is (973) 535-2717. In August 2019, the Company signed a seven (7) year lease in a facility in Roseland, New Jersey (the “Roseland Facility”). The Roseland Facility carries monthly lease payments of $9,275, commencing April 1, 2020. The Company is also responsible for electric charges equal to $2.00 per square foot, which is equal to $11,130 annually, payable in equal monthly installments of $928. The Company will also be required to pay its proportionate share of certain operating costs and property taxes applicable to the leased premises in excess of new base year amounts. A third-party distribution and logistics center in Pennsylvania handles shipping and order fulfillment on a month-to-month basis.

Milestone Scientific does not own or intend to invest in any real property. Milestone Scientific currently has no policy with respect to investments or interests in real estate, real estate mortgages or securities of, or interests in, persons primarily engaged in real estate activities.

Item 3. Legal Proceedings

Milestone Scientific is not involved in any material litigation.

Item 4. Mine Safety Disclosure

Not applicable.

PART II

Item 5. Market for Common Equity, and Related Stockholder Matters and Small Business Issuer Purchases of Equity Securities

Market Information

On June 1, 2015, our common stock was listed on the NYSE American under the symbol “MLSS”. The following table sets forth the high and low sales prices of Milestone’s common stock for the periods presented.

Holders

As of March 31, 2021, we had approximately 102 stockholders of record of our common stock. We believe that we have approximately 5,411 beneficial owners of our common stock.

Dividends

The holders of common stock are entitled to receive such dividends as may be declared by Milestone Scientific’s Board of Directors. Milestone Scientific has not paid and does not expect to declare or pay any dividends in the foreseeable future.

Sales of Unregistered Securities

During the year ended December 31, 2020 the Company issued 481,685 shares of common stock in payment of $838,460 of consulting expenses incurred by the Company.

The foregoing shares were issued in reliance upon the exemptions from the registration requirements of the Securities Act of 1933, as amended (the "Act"), pursuant to Sections 4(a)(2), Section 4(a)(5) and/or Regulation D promulgated there-under. These securities may not be offered or sold in the United States absent registration under or exemption from the Act and any applicable state securities laws. A legend restricting resale, transfer, or other disposition of these shares other than in compliance with the Act was imprinted on the stock certificates evidencing such shares.

ITEM 6. Selected Financial Data

Milestone Scientific is a “smaller reporting company” as defined by Regulations S-K and as such, is not required to provide the information contained in this item pursuant to Regulation S-K.

ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussions of the financial condition and results of operations should be read in conjunction with the financial statements and the notes to those statements included elsewhere in this annual report. Certain statements in this discussion and elsewhere in this report constitute forward-looking statements, within the meaning of section 21E of the Exchange Act, that involve risks and uncertainties. The actual results may differ materially from those anticipated in these forward-looking statements. See "Risk Factors" elsewhere in this Form 10-K.

OVERVIEW

Our common stock was listed on the NYSE American on June 1, 2015 and trades under the symbol “MLSS”. We have developed a proprietary, computer-controlled anesthetic delivery instrument, using The Wand, a single use disposable handpiece. The instrument is marketed in dentistry under the trademark CompuDent®, and STA Single Tooth Anesthesia System and in medicine under the trademark CompuMed. CompuDent is suitable for all dental procedures that require local anesthetic. CompuMed is suitable for many medical procedures regularly performed in plastic surgery, hair restoration surgery, podiatry, colorectal surgery, dermatology, orthopedics, and several other disciplines. The dental instruments are sold in the United States, US territories, Canada, and in over 58 other countries abroad. In June 2017, the FDA approved our 510(k) applications for marketing clearance in the United States of our CompuFlo Epidural System. We are in the process of introductory meetings with medical device distributors within the United States and Europe. There have been 27 medical instruments sold in the United States through December 2020, and limited amounts sold internationally as of the reporting date. Certain of our medical instruments have obtained European CE mark approval and can be marketed and sold in most European countries.

Milestone Scientific remains focused on advancing efforts to achieve the following four primary objectives:

Wand STA Dental Instrument Growth

Since its market introduction in early 2007, the Wand/STA Instrument and prior C-CLAD products have been used to deliver over 66 million safe, effective, and comfortable injections. The instrument has also been favorably evaluated in numerous peer-reviewed, published clinical studies and associated articles. Moreover, there appears to be a growing consensus among users that the STA Instrument is proving to be a valuable and beneficial instrument that is positively impacting the practice of dentistry worldwide.

Global Distribution Network

In December 2020, the Henry Schein Exclusive Distribution Agreement was replaced with a non-exclusive distribution agreement in the USA and Canada. Beginning in January 2021, the Company began enrollment of new dental non-exclusive regional distributors throughout the USA and Canada. As of this report date the Company has signed non-exclusive distributor agreements with eight regional dental distributors.

The following table shows a breakdown of Milestone Scientific’s product sales (net), domestically and internationally, by business segment product category:

Domestic: US Dental Medical Grand Total

International: Rest of World Dental Medical Grand Total

International: China Dental Medical Grand Total

Handpieces - - -

Domestic: US/Canada Dental Medical Grand Total

International: Rest of World Dental Medical Grand Total

International: China Dental Medical Grand Total

Accessories - - -

Current Product Platform

See Item 1. Description of Business.

Summary of Critical Accounting Policies and Significant Judgments andEstimates

The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, Milestone Scientific evaluates its estimates, including those related to accounts receivable, inventories, stock-based compensation, and contingencies. Milestone Scientific bases its estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not clear from other sources. Actual results may differ from those estimates under different assumptions or conditions.

While significant accounting policies are more fully described in Note C to the consolidated financial statements included elsewhere in this report, Milestone Scientific believes that the following accounting policies and significant judgment and estimates are most critical in understanding and evaluating the reported financial results.

Principles of Consolidation

Milestone Scientific's discussion and analysis of the financial condition and results of operations is based upon its consolidated financial statements that have been prepared in accordance with accounting principles generally accepted in the United States ("GAAP") and include the accounts of its wholly-owned and majority-owned subsidiaries including, Wand Dental, Milestone Advanced Cosmetic and Milestone Medical. All significant, intra-entity transactions and balances are eliminated in the consolidation.

Variable Interest Entities

A variable interest entity ("VIE") is an entity that either (i) has insufficient equity to permit the entity to finance its activities without additional subordinated financial support or (ii) has equity investors who lack the characteristics of a controlling financial interest. A VIE is consolidated by its primary beneficiary. The primary beneficiary has both the power to direct the activities that most significantly impact the entity's economic performance and the obligation to absorb losses or the right to receive benefits from the entity that could potentially be significant to the VIE.

Because Milestone Scientific has a variable interest in Milestone China it considered the guidance in ASC 810, “Consolidation” as it relates to determining whether Milestone China is a VIE and, if so, identifying the primary beneficiary. Milestone Scientific would be considered the primary beneficiary of the VIE if it has both of the following characteristics:

Milestone Scientific does not have the ability to control the activities that most significantly impact Milestone China's economics and, therefore, the power criterion has not been met. Management placed the most weight on the relationship and significance of activities of Milestone China to the CEO and a group of significant shareholders, including the Milestone China CEO, who has the power to direct the activities that most significantly impact the economic performance of Milestone China. Management has concluded that Milestone Scientific is not the primary beneficiary under ASC 810. Accordingly, Milestone China has not been consolidated into the financial statements of Milestone Scientific and continues to be accounted for under the equity method. See Note F.

Assessment of our Ability to Continue as a Going Concern

In accordance with Accounting Standard Codification (“ASC”) 205-40, “Presentation of Financial Statements – Going Concern”, the Company continually evaluates whether there are conditions or events, considered in the aggregate, that raise substantial doubt about the Company's ability to continue as a going concern within one year after the date that the consolidated financial statements are issued. Milestone Scientific has incurred operating losses and negative cash flows from operating activities in virtually each year since its inception.

In the second quarter of 2020, the Company was successful in raising approximately $19.7 million in public offerings. Based on the expected cash needed for operating activities, the Company’s current cash and liquidity is sufficient to finance the operating requirements for at least the next 12 months from the filing date of this annual report.

Other Uncertainties

The coronavirus (COVID-19) that was reported to have surfaced in Wuhan, China in December 2019 and that has now spread to other countries throughout the world has adversely impact our operations and those of our third-party partners. As a result of the reduced hours and closings of dental offices throughout the country and the rest of the world due to the continuing spread of COVID-19, revenues for the year ended December 31, 2020 was adversely affected.

There has been a slow pick up in dental instrument and disposable sell through to dentists beginning in the third quarter. In addition, it is uncertain as to what the effect will be on the anticipated commercialization of our CompuFlo Epidural and CathCheck system as a medical device . The extent to which the coronavirus impacts our operations, our third-party partners, the dental offices and hospital operations and demand depends on future developments which are still highly uncertain. Such future developments could have a material adverse effect on our financial results and our ability to conduct business as expected.

Accounts Receivable

Milestone Scientific sells a significant amount of its products on credit terms to its major distributors. Milestone Scientific estimates losses from the ability or inability of its customers to make payments on amounts billed. Most of credit sales are due within ninety days from invoicing.

Inventories

Inventories principally consist of finished goods and component parts stated at the lower of cost (first-in, first-out method) or net realizable value. Inventory quantities on hand are reviewed on a quarterly basis and a provision for excess and obsolete inventory is recorded if required based on past and expected future sales, potential technological obsolescence and product expiration requirement and regulations.

Impairment of Long-Lived Assets

Milestone Scientific reviews long-lived assets for impairment whenever events or circumstances (i.e. a triggering event) indicate that the carrying amounts may not be recoverable.

The Company’s impairment review process is based upon an estimate of future undiscounted cash flow. Factors the Company considers that could trigger an impairment review include the following:

• significant negative industry or economic trends, and

• significant technological changes, which would render the technology obsolete

Recoverability of assets that will continue to be used in the Company's operations is measured by comparing the carrying value to the future net undiscounted cash flows expected to be generated by the asset or asset group. Future undiscounted cash flows include estimates of future revenues, driven by market growth rates, and estimated future costs.

Revenue Recognition

The Company recognizes revenue when its customer obtains control of promised goods or services, in an amount that reflects the consideration which the Company expects to receive in exchange for those goods or services. To perform revenue recognition the Company performs the following five steps:

i. identification of the promised goods or services in the contract;

The Company derives its revenues from the sale of its products, primarily dental instruments, handpieces, and other related products. The Company sells its products through a global distribution network and that includes both exclusive and non-exclusive distribution agreements with related and third parties.

Revenue from product sales is recognized upon transfer of control of a product to a customer, generally upon date of shipment. For certain arrangements where the shipping terms are FOB destination, revenue is recognized upon delivery. The Company has no obligation on product sales for any installation, set-up, or maintenance, these being the responsibility of the buyer. Milestone Scientific's only obligation after sale is the normal commercial warranty against manufacturing defects if the alleged defective unit is returned within the warranty period.

Results of Operations.

The following table sets forth the consolidated results of operations for the year ended December 31, 2020 compared to 2019 . The trends suggested by this table may not be indicative of future operating results:

Operating results:

Operating expenses:

Change in fair value of derivative liability - (3,635,580 )

Net loss attributable to noncontrolling interests (51,539 ) (55,872 )

Net loss attributable to Milestone Scientific Inc. $ (7,337,273 ) $ (7,524,368 )

Net cash used in investing activities (21,438 ) (9,916 )

Year ended December 31, 2020 compared to year ended December 31, 2019.

Net sales for 2020 and 2019 were as follows:

Consolidated revenue for the twelve months ended December 31, 2020 and 2019 were approximately $5.4 million and $8.3 million, respectively. Dental revenue for the twelve months ended December 31, 2020 and 2019 were approximately $5.4 million and $8.4 million, respectively. Dental revenues decreased by approximately $2.9 million, which is related to COVID-19 pandemic affecting the Company’s customers and other business partners. As a result of the reduced hours and closings of dental offices throughout the country and the rest of the world due to the continuing spread of COVID-19, our revenue for the year ending December 31,2020 was materially and adversely affected. In December 2020, the Exclusive Distribution Arrangement with Henry Schein was replaced with a non-exclusive distribution arrangement. Under the non-exclusive arrangement, Henry Schein will purchase dental instruments and handpieces in the United States and Canada. Beginning in January 2021, the Company began a process of signing non-exclusive dental distribution arrangements with dental distributors in specific geographical locations in the United States and Canada. To date there are eight (8) new non-exclusive dental distributors engaged in the USA and Canada. The goal is to add additional non-exclusive distributors in three main cities in the USA. The goal of changing our marketing plan from a sole exclusive distributor in the USA and Canada, to a large number of non-exclusive distributors is to increase placement of our Wand/STA instrument and thus the expansion of our dental disposables.

Medical revenue for the twelve months ended December 31, 2020 and 2019, were approximately $16,000 and $38,000, respectively. In June 2017, the Company announced that the CompuFlo Epidural System received 510(k) marketing clearances from the U.S. Food and Drug Administration (FDA). Milestone is in the process of attending virtual medical device trade shows and attending introductory meetings with medical facilities and medical device distributors within the United States and European markets. The Company is focusing the marketing its Epidural devices principally in the United States. In 2020, the Company began to build an internal sales force to market the Epidural devices to hospitals and medical center throughout the United States. The 2020 COVID - 19 Pandemic has substantially reduced access to many medical facilities for further research projects and as such, trade shows were cancelled through 2020. The Company is now in the process of re-energizing its direct sales efforts with select hospitals and end user meetings as the Pandemic surge has slowed in the USA. The Company’s focus will be on marketing the Epidural medical instruments in the United States.

Gross Profit for 2020 and 2019 were as follows:

Consolidated gross profit for the twelve months ended December 31, 2020 and 2019 were approximately 67% and 68%, respectively.

Selling, general and administrative expenses for 2020 and 2019 were as follows:

Consolidated selling, general and administrative expenses for the twelve months ended December 31, 2020 and 2019 were approximately $10.7 million and $9.5 million, respectively. This increase of approximately $1.2 million is categorized in several areas. Employee salaries, and benefits expenses increased approximately $1.0 million for twelve months s ended December 31, 2020, as the Company hired additional employees to work on the commercialization of the CompuFlo® Epidural System. During the twelve months ended December 31, 2020 D&O insurance increased approximately $169,000 due to the increase of premiums. The Company expensed approximately $370,000 of bad debt related to a settlement with United Systems, see Note F. Office expense increased approximately $143,000 for the relocation of the Company's office and other related costs. Due to Covid-19 Pandemic, the Company's travel expenses, marketing, trade shows, quality control, and general expenses decreased approximately $560,000 while professional and consulting expense increased approximately $75,000.

Research and Development for 2020 and 2019 were as follows:

Dental $ - $ - $ - 0 %

Consolidated research and development expenses for the twelve months ended December 31, 2020 and 2019, were approximately $308,000 and $190,000, respectively. The increase approximately $118,000 is associated with the Company developing software upgrades and enhancement for the CompuFlo® Epidural System and handpieces.

Profit (Loss) from Operations for 2020 and 2019 were as follows:

The loss from operations was approximately $7.4 million and $4.0 million for the twelve months ended December 31, 2020 and 2019, respectively, an increase of $3.4 million. The increase is the result of decreased dental revenue, due to reduced hours and closings of dental and medical offices throughout the country and the rest of the world due to the continuing spread of COVID-19.

Change in Derivative Liability

In 2019, the Company incurred a non-cash expense of approximately $3.65 million due to the shares and warrants issued in the public and private offerings as well as other issuance of common stock during 2019 for which the Company did not have a sufficient number of authorized shares of common stock to cover the exercise and issuance of approximately 5,850,000 outstanding equity instruments. All warrants issued in the public and private placements during 2019 and 2016, all shares-to-be-issued, and certain employee options were classified as liabilities during part of year ended December 31, 2019. The Company received shareholder approval to increase the number of authorized shares of common stock on December 17, 2019. At that time, the Company extinguished the liability for insufficient number of authorized shares of common stock. At December 31, 2019, all outstanding warrants, shares to be issued and options are not classified as a liability.

Liquidity and Capital Resources

Milestone Scientific has incurred annual operating losses and negative cash flows from operating activities since its inception. Milestone Scientific is actively pursuing the generation of positive cash flows from operating activities through an increase in revenue from its dental business and the medical business worldwide, and a reduction in operating expenses.

In the second quarter of 2020 the Company completed two capital raises. In April 2020, the Company completed a Common Stock Offering generating gross proceeds of approximately $5.1 million (5,420,000 common shares and 2,710,000 warrants). The combined price of the shares and warrants was $0.95 per share. The warrants are exercisable at a price of $1.20 per share and have an expiration of three years from the issue date. In June 2020, the Company completed a second Common Stock Offering generating gross proceeds of approximately $14.6 million (6,770,000 common shares and 3,749,000 warrants). The combined price of shares and warrants of was $2.15 per share. The warrants are exercisable at a of $2.60 and expire three years from the issue date. See Note I. With the combination of these two Common Stock Offerings, the Company has sufficient liquidity to support operations for at least a year after the consolidated financial statements issue date.

Management believes that the Company has sufficient cash, along with the current cash flow and support from the dental business to mitigate the expected selling expenditures for commercialization of the Epidural medical device, as well as other operating expenditures and planned new product development programs, over the next twelve months from the filing date of this report. Dental offices in the USA and world-wide are in the process of reopening to near pre Covid-19 volumes. For the medical sector, hospitals in the USA are opening for elective procedures and as such we ae looking for new and innovative medical solutions. The positive movement in the hospitals will be a benefit step to our sales efforts for the Epidural instrument.

Off-Balance Sheet Arrangements

Milestone Scientific does not have any off-balance sheet arrangements that are currently material or reasonably likely to be material to the financial position or results of operations.

Contractual Obligations

The impact of the consolidated contractual obligations at December 31, 2020 , expected on the liquidity and cash flows in future periods, is as follows:

Payments Due by Period

Total Less than 1 Year 1-3 Years 3-5 Years

(1) Purchase obligations include agreements for the purchase of dental and medical devices, including purchase obligations entered into post year end, which will require payment in during the year ended 2021.

Recent Accounting Pronouncements

See “Note C - Summary of Significant Accounting Policies” to the consolidated financial statements for explanation of recent accounting pronouncements impacting Milestone Scientific.

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

Milestone Scientific is a “smaller reporting company” as defined by Regulation S-K and, as such, is not required to provide the information required by this item.

Item 8. Financial Statements

The financial statements of Milestone Scientific required by this Item are set forth beginning on page F-1.

Item 9. Change in and Disagreements with Accountants on Accounting andFinancial Disclosure

None.

Item 9A. Controls and Procedures

Milestone Scientific’s Interim Chief Executive Officer and Chief Financial Officer have evaluated the effectiveness of the design and operation of Milestone Scientific’s disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) as of the end of the period covered by this report. Based upon that evaluation, Milestone Scientific’s Interim Chief Executive Officer and Chief Financial Officer have concluded that the disclosure controls and procedures as of December 31, 2020 are effective to ensure that information required to be disclosed in the reports Milestone Scientific files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to Milestone Scientific's management, including the Interim Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Management’s Annual Report on Internal Control over Financial Reporting

Milestone Scientific management is responsible for establishing and maintaining internal controls over financial reporting. The internal controls over financial reporting includes those policies and procedures that:

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate. All internal control instruments, no matter how well designed, have inherent limitations. Therefore, even those instruments determined to be effective can provide only reasonable assurance with respect to financial statement preparation and presentation. Because of the inherent limitations of internal control, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, this risk.

Milestone Scientific management assessed the effectiveness of its internal control over financial reporting as of December 31, 2020. In making this assessment, management used the framework in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) adopted in 2013. Based on the assessment and the criteria set forth by COSO, management believes that Milestone Scientific maintained effective internal control over financial reporting as of December 31, 2020. There have been no changes in Milestone Scientific’s internal control over financial reporting identified in connection with the evaluation that occurred during Milestone Scientific’s last fiscal quarter ended December 31, 2020 that have materially affected, or that are reasonably likely to materially affect, Milestone Scientific’s internal controls over financial reporting.

Item 9B. Other Information

None.

PART III

Item 10. Directors, Executive Officers, Promoters, Control Persons and CorporateGovernance; Compliance with Section 16 (a) of the Exchange Act.

Milestone Scientific’s directors are elected annually by the stockholders and serve for one-year terms until his/her successor is elected and qualified or until such director’s earlier death, resignation, or removal. The executive officers and key personnel are appointed by and serve at the discretion of the Board of Directors The current executive officers and directors of Milestone Scientific and their respective ages, as of March 29, 2021 are as follows:

NAME AGE POSITION DIRECTOR SINCE

Leslie Bernhard (1) (2) (3) 76 Chairman of the Board 2003

Leonard Osser 73 Interim Chief Executive Officer and Director 1991

Jan Adriaan (Arjan ) Haverhals 59 President

Joseph D'Agostino 69 Chief Financial Officer and Chief Operating Officer

Gian Domenico Trombetta 60 Director 2014

1. Member of the Audit Committee

2. Member of the Compensation Committee

3. Member of the Nominating and Corporate Governance Committee

The following are the names of individuals who are not executive officers of Milestone Scientific but are deemed key personnel of Milestone Scientific, their respective ages and positions as of March 29, 2021 .

NAME AGE POSITION

Eugene Casagrande, D.D.S. 76 Director of International Professional Relations

Mark Hochman, D.D.S. 61 Director of Clinical Affairs

Leonard Osser, Interim Chief Executive Officer and Director

Leonard Osser has been Interim Chief Executive Officer since December 2017. From July 2017 to December 2017, he had been Managing Director –China Operations. Prior to that, he served as Milestone Scientific’s Chairman from 1991 until September 2009, and during that time, from 1991 until 2007, was also Chief Executive Officer of Milestone Scientific. In September 2009, he resigned as Chairman of Milestone Scientific, but remained director, and assumed the position of Chief Executive Officer. From 1980 until the consummation of Milestone Scientific’s public offering in November 1995, Mr. Osser was primarily engaged as the principal owner and Chief Executive Officer of U.S. Asian Consulting Group, Inc., a New Jersey-based provider of consulting services specializing in distressed or turnaround situations in both the public and private markets. Mr. Osser’s knowledge of our business and background with us since 1980 provides the Board with valuable leadership skills and insight into our business and accordingly, the expertise needed to serve as one of our directors.

Jan Adriaan (Arjan) Haverhals , President

Mr. Haverhals has been Milestone Scientific's President since September 2020 and as the President and Chief Executive Officer of Milestone Scientific’s Dental Division (Wand Dental Inc.) since June 2020. He brings more than 30 years of sales, marketing, product development, and international expansion experience within the medical device, pharmaceutical, and other industries. Prior to joining Wand Dental and Milestone Scientific, Mr. Haverhals was senior vice president of sales at Xcentric Mold & Engineering from 2019 until 2020 where he was instrumental in increasing sales productivity and efficiency for the company's prototype injection molding services, which included leading healthcare company clients. From 2012 until 2018, Mr. Haverhals worked at Straumann, LLC, a global leader in manufacturing medical and dental devices, where he held a series of senior sales and marketing roles including vice president of customer marketing & education, where he oversaw all product franchises and led the launch of more than 30 products in the North American market. He also served as senior vice president for the Nordic Region at Straumann AB, senior vice president of global sales digital solutions, which included oversight of the strategic acquisition of Etkon; and served as vice president of the Prosthetics Business Unit, where he introduced a new implant and prosthetics product line within a new market segment.

MLSS US Equity

MLSS · 10-K · period ended 2020-12-31

Item 1. Business

Item 1A. Risk Factors

Item 1B. Unresolved Staff Comments

Item 2. Description of Property

Item 3. Legal Proceedings

Item 4. Mine Safety Disclosure

Item 5. Market for Common Equity, and Related Stockholder Matters and Small Business Issuer Purchases of Equity Securities

ITEM 6. Selected Financial Data

ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

Item 8. Financial Statements

Item 9. Change in and Disagreements with Accountants on Accounting andFinancial Disclosure

Item 9A. Controls and Procedures

Item 9B. Other Information

Item 10. Directors, Executive Officers, Promoters, Control Persons and CorporateGovernance; Compliance with Section 16 (a) of the Exchange Act.

MLSS US Equity☆

MLSS · 10-K · period ended 2020-12-31

Item 1. Business

Item 1A. Risk Factors

Item 1B. Unresolved Staff Comments

Item 2. Description of Property

Item 3. Legal Proceedings

Item 4. Mine Safety Disclosure

Item 5. Market for Common Equity, and Related Stockholder Matters and Small Business Issuer Purchases of Equity Securities

ITEM 6. Selected Financial Data

ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

Item 8. Financial Statements

Item 9. Change in and Disagreements with Accountants on Accounting andFinancial Disclosure

Item 9A. Controls and Procedures

Item 9B. Other Information

Item 10. Directors, Executive Officers, Promoters, Control Persons and CorporateGovernance; Compliance with Section 16 (a) of the Exchange Act.

MLSS US Equity