intensity-20241231
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
x ANNUAL REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2024
or
o TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from ______________ to ______________
Commission File Number 001-41109
INTENSITY THERAPEUTICS, INC.
(Exact name of registrant as specified in its charter)
1 Enterprise Drive, Suite 430
(Address of principal executive offices) (Zip Code)
(203) 221-7381
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class Trading symbol(s) Name of each exchange on which registered
Common Stock, par value $0.0001 per share INTS The Nasdaq Stock Market LLC
Securities registered pursuant to Section 12(g) of the Act: None.
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes oNox
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes oNox
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yesx No o
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yesx No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer o Accelerated filer o
Non-accelerated filer x Smaller reporting company x
Emerging growth company x
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. o
If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. o
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act of 1934). Yes oNox
The aggregate market value of the voting and non-voting common equity held by non-affiliates of the Registrant, based on the closing price of the shares of common stock on The Nasdaq Stock Market on June 30, 2024, was $45.3 million.
As of March 12, 2025, the registrant had 15,180,945 shares of common stock, $0.0001 par value, outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
None.
Table of Contents
INTENSITY THERAPEUTICS, INC.
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2024
TABLE OF CONTENTS
Page
PART I
Item 1. Business 2
Item 1A. Risk Factors 50
Item 1B. Unresolved Staff Comments 80
Item 1C Cybersecurity 80
Item 2. Properties 82
Item 3. Legal Proceedings 82
Item 4. Mine Safety Disclosures 82
PART II
Item 6. [Reserved] 83
Item 7A. Quantitative and Qualitative Disclosures About Market Risk 91
Item 8. Financial Statements and Supplementary Data 91
Item 9A. Controls and Procedures 91
Item 9B. Other Information 93
Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 93
PART III
Item 10. Directors, Executive Officers and Corporate Governance 94
Item 11. Executive Compensation 99
Item 14. Principal Accountant Fees and Services 111
PART IV
Item 15. Exhibits and Financial Statement Schedules 112
i
Table of Contents
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). All statements, other than statements of historical facts, contained in this report, including statements regarding our strategy, future operations, future financial position, future revenue, projected costs, prospects, plans, objectives of management and expected market growth are forward-looking statements. These statements involve known and unknown risks, uncertainties and other important factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements.
The words “anticipate,” “believe,” “estimate,” “expect,” “intend,” “may,” “plan,” “predict,” “will,” “project,” “would” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. These forward-looking statements include, among other things, statements about:
•the initiation, timing, progress and results of future preclinical studies and clinical trials, and our research and development programs;
•our need to raise additional funding before we can expect to generate any revenues from product sales;
•our plans to develop and commercialize our product candidates;
•the timing or likelihood of regulatory filings and approvals;
•the ability of our research to generate and advance additional product candidates;
•the implementation of our business model, strategic plans for our business, product candidates and technology;
•our commercialization, marketing and manufacturing capabilities and strategy;
•the rate and degree of market acceptance and clinical utility of our system;
•our competitive position;
•our intellectual property position;
•developments and projections relating to our competitors and our industry;
•our ability to maintain and establish collaborations or obtain additional funding;
•our expectations related to the use of our cash and cash equivalents; and
•our estimates regarding expenses, future revenue, capital requirements and needs for additional financing.
These forward-looking statements reflect our management’s beliefs and views with respect to future events and are based on estimates and assumptions as of the date of this Annual Report on Form 10-K and are subject to risks and uncertainties. We discuss many of these risks in greater detail under “Risk Factors.” Moreover, we operate in a very competitive and rapidly changing environment. New risks emerge from time to time. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. Given these uncertainties, you should not place undue reliance on these forward-looking statements.
You should read this Annual Report on Form 10-K and the documents that we have filed with the SEC as exhibits to this Annual Report on Form 10-K completely, and with the understanding that our actual future results, levels of activity, performance and events and circumstances may be materially different from what we expect. We qualify all forward-looking statements in this Annual Report on Form 10-K by these cautionary statements. Except as required by law, we undertake no obligation to publicly update any forward-looking statements, whether as a result of new information, future events, or otherwise.
1
Table of Contents
PART I
Throughout this Annual Report on Form 10-K, the “Company,” “Intensity,” “we,” “us,” and “our” refers to Intensity Therapeutics, Inc.
ITEM 1. BUSINESS
OVERVIEW
Intensity Therapeutics, Inc. is a late-stage clinical biotechnology company passionately committed to applying scientific leadership in the field of localized cancer reduction leading to anti-cancer immune activation. Our new approach involves the direct injection into tumors of a unique product created from our DfuseRxSM discovery platform.
Intratumoral (“IT”) treatment, or treatment designed to contain a drug inside a tumor without spreading to the rest of the body, has been an objective of clinicians since discovery of chemotherapeutic agents. The challenge with IT treatment approaches is that a tumor’s lipophilic, high fat, dense and pressurized microenvironment is incompatible with and does not absorb water-based products. We believe that this drug delivery challenge limits the effectiveness of prior and current IT treatments, which involve injecting aqueous drugs into a tumor without sufficient consideration of the tumor environment (regardless of the drug’s mechanism or approach, i.e. the stimulation of an inflammatory response or efforts to attract immune cells into a hostile live tumor). Accordingly, there remains a continued unmet need for the development of direct IT therapies for solid tumors that provide high local killing efficacy coupled with nontoxic systemic anti-cancer effects. We believe we have created a product candidate with the necessary chemistry to overcome this local delivery challenge. Evidence shows the mechanism of tumor killing achieved by our drug candidate also leads to systemic immune activation and T-cell repertoire expansion in certain cancers.
Our platform creates patented anti-cancer product candidates comprising active anti-cancer agents and amphiphilic molecules. Amphiphilic molecules have two distinct components: one part is soluble in water and the other is soluble in fat or oils. When an amphiphilic compound is mixed with therapeutic agents, such as chemotherapies, the agents also become soluble in both fat and water. Our product candidates include novel formulations consisting of potent anti-cancer drugs mixed together with these amphiphilic agents.
Our lead product candidate, INT230-6, is primarily comprised of three components: (i) cisplatin, a proven anti-cancer cytotoxic agent, (ii) vinblastine sulfate, also a proven anti-cancer cytotoxic agent, and (iii) an amphiphilic molecule (“SHAO”) which enables the two cytotoxic agents to disperse through a tumor and diffuse into cancer cells following a direct intratumoral injection. These three components are mixed and combined into one vial at a fixed ratio. Cisplatin and vinblastine sulfate are both generic and available to purchase in bulk supply commercially. The United States Food & Drug Administration (“FDA”) has approved both drugs as intravenous agents for several types of cancers. Cisplatin was first approved in 1978 for testicular cancer, and is also approved in ovarian and bladder cancer. The drug is also used widely in several other cancers including pancreatic and bile duct cancer. Vinblastine sulfate was first approved in 1965, and is also approved in generalized Hodgkin’s disease, lymphocytic lymphoma, advanced carcinoma of the testis, and certain types of sarcomas. The drug is also used in breast and lung cancer.
In 2017, we initiated our first trial, a Phase 1/2 dose escalation study (“IT-01 Study”) using INT230-6 in the United States under an investigational new drug application (“IND”) authorized by the FDA and in Canada under a preclinical trial application (“CTA”) approved by Health Canada. The study tested the safety and efficacy of INT230-6 in patients with refractory or metastatic cancers, and enrolled 110 patients in three arms: (i) INT230-6 used as a monotherapy, (ii) INT230-6 in combination with Merck’s Keytruda® (pembrolizumab), and (iii) INT230-6 in combination with Bristol Myers Squibb’s (“BMS”) Yervoy® (ipilimumab). We completed enrollment of the IT-01 Study in June 2022, locked the IT-01 Study database in February 2023 and finalized the clinical study report in September 2023. We delivered the combination-specific reports and other information to our partners in the fourth quarter of 2023.
In 2021, we initiated our second trial, a Phase 2 randomized study that tested INT230-6 as a monotherapy treatment in early-stage breast cancer for patients not suitable for presurgical chemotherapy (the “INVINCIBLE-2 Study”). The study enrolled 91 subjects and the database was locked in November 2023. The key endpoint was whether INT230-6 could reduce a patient’s cancer compared to no treatment, which is the current standard of care (“SOC”) for the majority of patients with early-stage breast cancer, or a saline injection. Substantial reduction of cancer presurgically in aggressive forms of cancer has been shown to correlate with delaying disease recurrence. The key endpoints of the INVINCIBLE 2 Study were to understand the percentage of necrosis that can be achieved in tumors of varying sizes for a given dose,
2
Table of Contents
especially for tumors larger than 2 centimeters in longest diameter. We also sought to determine whether a local or whole-body anti-cancer immune response could be induced. The INVINCIBLE-2 Study demonstrated a high order of necrosis in presurgical breast cancer tumors in the period from diagnosis to surgery, with some patients experiencing greater than 95% necrosis of the tumor. Data from the INVINCIBLE-2 Study demonstrated that INT230-6 had a favorable safety profile. There was also an increase of certain types of immune cells (CD4+ and NK T-cells) in the tumor and blood.Additionally, there was an increase in the T-cells repertoire relative to control.
In July 2024, we initiated and dosed our first patient in a Phase 3 open-label, randomized study (the “INVINCIBLE-3 Study”) testing INT230-6 as a monotherapy compared to the SOC drugs in second-and third-line treatment for certain soft tissue sarcoma subtypes. This study has been authorized by the FDA, Health Canada, the European Medicines Authority, and Australia's Therapeutics Goods Administration. The trial is enrolling patients and is being conducted in eight countries: the US, Australia, Canada, France, Germany, Italy, Poland, and Spain. Up to 60 sarcoma-focused hospitals and other centers are expected to participate from these countries. We plan to enroll 333 patients and expect to complete enrollment in the first half of 2026, with an endpoint of overall survival.
In October 2024, in collaboration with the Swiss Group for Clinical Cancer Research SAKK ("SAKK"), we initiated and dosed our first patient in a Phase 2 study (the “INVINCIBLE-4 Study”) to treat patients with localized triple-negative breast cancer (“TNBC”). We plan to enroll 54 patients and expect to complete enrollment by the end of the first quarter of 2026, and the endpoint is the change in the pathological complete response rate for the combination compared to the SOC alone.
We have also successfully developed Phase 3 quality analytical methods for the three INT230-6 components and successfully manufactured multiple large-scale batches of INT230-6. In a meeting with the FDA in the fourth quarter of 2023, we agreed on a chemical manufacture and control (“CMC”) plan for Phase 3 and product registration for our three key ingredients and INT230-6. If we successfully execute the agreed-upon plan, we expect that the CMC portion of a New Drug Application (“NDA”) should be acceptable to the FDA for product approval and registration (subject to final NDA review).
Our Pipeline
Our pipeline is focused on realizing the full potential of INT230-6 in metastatic and local disease settings to help cancer patients with major unmet medical need. We are exploring the use of INT230-6 across multiple cancer types (including those types that do not normally respond to immunotherapy) and “hot” tumors (cancer types that are more likely to respond to immunotherapy).
Our current pipeline consists of:
•INVINCIBLE-3 Study, a Phase 3 open-label, randomized study testing the superiority INT230-6 used as monotherapy compared to the standard of care drugs in 2nd and 3rd line treatment for certain soft tissue sarcoma subtypes. In September 2023, the FDA granted orphan drug designation for the treatment of soft tissue sarcoma to the three active moieties comprising INT230-6: cisplatin, vinblastine sulfate, and the diffusion enhancer SHAO.
•INVINCIBLE-4 Study, a two cohort Phase 2 randomized, controlled study testing INT230-6 in combination with the SOC treatment (chemotherapy/immunotherapy) (cohort A) and the SOC alone (cohort B) in women in presurgical (neoadjuvant) TNBC. This is a two-cohort noncomparative trial with null hypotheses (H0): pathological complete response (“pCR”) rate ≤ 0.6, and (H1): pCR rate ≥ 0.8.
•A Phase 2 clinical study in metastatic triple negative breast cancer, contingent on raising additional capital to fund the study.In 2018, we received Fast Track Designation by the FDA to use INT230-6 in metastatic triple negative breast cancer for patients whose cancer has progressed following one or two prior drug treatments.
3
Table of Contents
Our Partnerships
•The National Cancer Institute (“NCI”). In May 2014, we were awarded a Collaboration Research and Development Agreement (“CRADA”) by the National Institute of Health’s National Cancer Institute. The research sought to understand the mechanism of action of INT230-6 and test the drug in several models in the NCI’s laboratories. The program resulted in a peer-reviewed publication titled Intratumorally delivered formulation, INT230-6, containing potent anti-cancer agents induces protective T-cell immunity and memory, which appeared in the journal OncoImmunology 2019 Vol 8 No 10; 15 and that was jointly authored by us and the NCI. The data for the paper was generated entirely by the NCI in their laboratories and reported the critical role of T-cells in promoting complete tumor regression using our drug candidate and that INT230-6 was synergistic with anti-PD-1 (programmed death receptor 1) and anti-Cytotoxic T Lymphocyte-Associated Antigen 4 (“CTLA-4”) antibodies.
•Merck. In June 2019, we entered into an agreement with Merck to evaluate the combination of INT230-6 with Keytruda® (pembrolizumab), Merck’s anti-PD-1 therapy, in patients with advanced solid malignancies, including pancreatic, bile duct, squamous cell and non-MSI high colon cancers. In our IT-01 Study, we treated 30 patients with this combination arm. After nearly two years of dosing a combination of Keytruda and INT230-6, patients showed comparable safety to INT230-6 monotherapy. Subjects enrolled in the single arm combination with pembrolizumab received a diagnosis of cancer progression following a median of 3 prior lines of therapy. The median OS in the All Treated Population was 4.7 months (95% CI: 2.5, 10.1). Only three grade 3 immune-related adverse events reported in patients receiving the combination. We completed study dosing in December 2022 and provided the study information to Merck in December 2023.
•Bristol Myers Squibb. In April 2020, we entered into an agreement with BMS to evaluate the safety and efficacy of INT230-6 with Yervoy® (ipilimumab), BMS’s CTLA-4 immune checkpoint inhibitor, in patients with breast (17%), liver (5%), and advanced sarcoma cancer (78%). In our IT-01 Study, we treated 18 patients in this combination arm, and there was only one grade 3 immune-related adverse event (colitis) reported. The median OS for the IT-01 combination cohort was not reached (NA) (95% CI: 7.2, NA) in the All Treated Population. We completed study dosing in December 2022 and provided the study information to BMS in December 2023.
•SAKK. In May 2024, we entered into a collaboration agreement with SAKK to conduct our INVINCIBLE-4 Study. SAKK is a decentralized academic research institute that has been conducting clinical trials of cancer treatments in all major Swiss hospitals since 1965. It federates a large network of research groups with a Competence Center in Bern in charge of coordinating the clinical operations. It also works with selected cooperative groups abroad, particularly on rare forms of cancer. SAKK's aim is to advance existing cancer treatments, investigate the efficacy and tolerability of new treatments (radiotherapy, medicines and surgery), and set new standards in treatment. 22 Swiss hospitals are full members of SAKK.
Our Clinical Data
INT230-6 has generated anti-cancer evidence of activity as a single agent in clinical studies. Localized and abscopal effects have been observed in several patients. Tumor regressions with killing of the cancer cells is widely observed in injected lesions. Many patients who have exhausted all approved treatments for their types of cancer benefited from our product candidate. Our clinicians have reported tumor stabilization, tumor shrinkage, long periods without new tumors forming, size reductions of uninjected tumors and a reduction in disease symptoms. These results have been observed in combination with lower toxicities over a period of several months and post-treatment.
•Increased Survival Observed in Metastatic Disease. Preliminary data presented at the American Society of Clinical Oncology (“ASCO”) the Society for Immunotherapy of Cancer (“SITC”) and the Connective Tissue Oncology Society (“CTOS”) for sarcoma in 2022 and 2023 indicated that patients receiving INT230-6 appear to live longer compared to historical data for subjects in phase 1/2 sarcoma studies.
•Acceptable Safety Profile of the New Drug/Treatment Approach to Date. During the IT-01 Study there were 820 injections of INT230-6 into 238 tumors, including 502 injections into visceral tumors deep in the body. Injection locations include the pancreas, liver, lung, and lymph nodes. No maximum tolerated dose had been reached. In our IT-01 Study in metastatic patients, most adverse events were minor grade 1 or 2; a total of 15 patients out of 110 (13.6%) had a grade 3 even related to the drug regimen (INT230-6 alone or combined with the two immunotherapies). The primary grade 3 events were pain, anemia, rash, fatigue vomiting, dehydration and dizziness. There was 1 laboratory-based grade 4 adverse event that resolved quickly, a decrease in the
4
Table of Contents
number of neutrophils, the most common type of white blood cell that contributes toward the healing of damaged tissues and resolving infections. There were no grade 5 adverse events. We believe the safety profile consisted of mainly low grade related adverse events because the drug primarily stays in the tumor and the potent agents did not travel throughout the body. Measurement of the amount of the drugs seen in the blood (pharmacokinetics or PK) indicated that more than 95% of the drug that was dosed remained in the tumor.
Our Manufacturing Capabilities
We do not own or operate facilities for drug manufacturing, storage and distribution, or testing. We work with clinical manufacturing organizations to manufacture the clinical supplies of our current and any future product candidates. In 2023, we successfully developed the Phase 3 quality analytical methods for measurement of the key INT230-6 components, validated those methods and had manufactured our fourth current Good Manufacturing Practice (“cGMP”) clinical batch of the drug product that met specifications. During the fourth quarter of 2023, the Company requested and was granted a meeting that was held with the FDA to review the INT230-6 CMC for INT230-6. The CMC discussion focused on the tasks necessary to initiate the Phase 3 study and future product registration as part of a potential New Drug Application (“NDA”). During the meeting, the Company and the FDA agreed upon a plan for the CMC set of activities for the active pharmaceutical ingredients and the drug product (INT230-6) necessary for the NDA.
Our Proprietary Drug Discovery platform, DfuseRxSM
Since our inception, we have conducted research using our discovery platform. Our technology platform allows us to identify novel product formulations and test the products’ activity in animal or test tube models of cancer. Using our platform technology, we evaluated several potential formulations comprising various amphiphilic molecules that act as cancer cell penetration enhancers. We tested formulations using our technology with many potent, anti-cancer drugs (with different mechanisms of action) in various combinations under several conditions to discover our lead product candidate, INT230-6.
Our Strategy
We believe our treatment approach may overcome some of the inherent problems of treating cancer with less toxicity. We intend to apply our deep understanding of our novel drug delivery technology to create a range of new direct killing and immune-activating products candidates while focusing on our lead clinical programs. If successful, we hope to fundamentally change treatment for multiple cancer types in both the metastatic and presurgical disease settings.
We seek to build a company that develops and commercializes a new medicine and treatment methodology. By applying a disciplined focus on product development, we seek to transform the lives of cancer patients and change the very essence of cancer treatment.
Our objective is for patients to overcome their cancer without harm, to live a long life with high quality and to eliminate the fear of disease recurrence or the therapy itself. We maintain a culture of high integrity that embraces the patient and their caregivers. A simple strategy: taking care of the patient will benefit all stakeholders.
Key elements of our strategy include:
•focusing our resources to aggressively pursue the research and development of our novel medicine to transform patient lives.
•providing high-quality care of the patient is a critical element to being successful.
•effectively managing costs by outsourcing research and development to qualified, academic, private or government laboratories to leverage third-party expertise, while maintaining internal know-how, expertise and intellectual property.
•building an internal team of experienced industry veterans that can work independently and who know how to get the product development job done.
•creating a large body of rigorous data, publications, presentations, collaborations and training materials about the new product candidates.
•continuously communicating to the medical community and patients of the power of our new approach.
•continuing our commitment to precision medicine and personalized care for each and every patient.
•assuring that our technology is fully understood, explored, and used as designed.
5
Table of Contents
Market Opportunities for Our Product Candidates
The development of a tumor is a complex biological process involving uncontrolled cellular division and growth. Cancer arises from mutations in our own cells. When such cellular alterations happen the immune system often cannot distinguish between cancer and healthy cells. Cancer cells adapt to evade and thwart immune cells in several ways and can thus grow unchecked.
According to the American Cancer Society, in 2025 there will be an estimated 2 million new cancer cases diagnosed and over 618,000 cancer deaths in the United States. Cancer is the second most common cause of death in the U.S. after heart disease. According to the American Society of Clinical Oncology’s journal, the ASCO Post, the national cost of cancer care in the United States is expected to rise to $246 billion by 2030. As healthcare costs in general continue to escalate, expenses due to cancer are a major contributing factor.
Metastatic Disease
The overwhelming, unmet medical need is better treatment of solid tumors; 90% of cancer patient deaths are due to solid tumors. Unfortunately, even with the best new therapeutic agents, the long-term survival rates for inoperable or metastatic cancer are extremely low (often single digits) and toxicity (the collateral damage to the patient’s health) is debilitating.
Five-year Survival Percentage Rates for Metastatic, Late-Stage Cancers
Cancer type 5 YearSurvival(%)* Cancer type 5 YearSurvival(%)*
Colon/rectal 15 Pancreas 3
Esophagus 5 Prostate 30
Liver 3 Thyroid 53
Lung/Bronchus 6 Urinary bladder 6
Melanoma (skin) 30 Uterine cervix 18
Oral cavity 40 Uterine corpus 16
____________
*For cancers that have moved to distal sites
Data sources for the above table: Surveillance, Epidemiology, and End Results National Cancer Institute, SEER 5-Year Relative Survival Rates, 2011 – 2017
In late-stage, metastatic disease, tumors often become resistant to all therapies, even after the agents have provided some efficacy benefit. The reality today for many cancer types is that if the disease is detected late, most treatments are highly toxic and few of today’s approaches provide patients with much hope of long-term survival. Even with good outcomes, whether by surgical, chemical, radiative, immunological or ablative methods, cancer treatments are invasive, have severe side effects, damage the body and are mentally demanding on patients and their families.
Local Disease
Today, the annual number of interventional oncology procedures in the U.S. alone are estimated in the millions. For example, the majority of breast cancer tumors identified are local to the breast or are regional. According to Breast Cancer Facts and Stats 2024, 66% of breast cancer cases are diagnosed at the localized stage. All too often, a post-operative pathology report shows that while the surgeon may have removed the entire tumor, a second surgical procedure is needed to clean up lingering cancer cells. Known as re-excision, it occurs in roughly 20% to 25% of cases, on average. It is critical for surgeons and their patients to have access to the latest innovations, once demonstrated effective by clinical research, be used wherever and whenever possible.” Our drug candidate’s potential to kill cancer quickly prior to surgery and engage an anti-cancer immune response may provide a higher percentage of patients a greater five-year event-free survival for a number of tumor types.
6
Table of Contents
Breast Cancer
About 1 in 8 U.S. women (about 13%) will develop invasive breast cancer over the course of her lifetime. According to the American Cancer Society, in 2025, there are expected to be approximately 316,950 new cases of invasive breast cancer diagnosed in women in the United States; 2800 new cases diagnosed in men, and an additional 59,080 new cases of ductal carcinoma in situ diagnoses. Breast cancer is the most commonly diagnosed cancer among American women. Breast cancer accounted for 11% of all new annual cancer cases worldwide, according to Globaocan’s Global Cancer Statistics 2022.
Approximately 11 – 17% of breast cancers test negative for estrogen receptors, progesterone receptors, and excess human epidermal growth factor receptor 2 (“HER2”) protein, qualifying them as TNBC. TNBC is considered to be more aggressive and have a poorer prognosis than other types of breast cancer, mainly because there are fewer available targeted medicines especially for women have tumors above 2 cm in longest diameter. Patients typically receive chemotherapy. According to a study published in the Journal of Clinical Oncology, patients who fail two lines of therapy for TNBC typically progress within nine weeks. Those who have failed three lines progress within four weeks.
Sarcoma
Soft tissue sarcoma is a broad term for cancers that start in soft tissues (muscle, tendons, fat, lymph and blood vessels, and nerves). These cancers can develop anywhere in the body but are found mostly in the arms, legs, chest, and abdomen. There are many types of soft tissue tumors, and not all of them are cancerous.
There are many types of sarcomas; however, the four most common are bone sarcoma (referred to as osteosarcoma), and soft tissue sarcomas (“STS”) leiomyosarcoma, undifferentiated pleomorphic sarcoma and liposarcoma. Leiomyosarcoma is a type of sarcoma that grows in the smooth muscles. The smooth muscles are also in the hollow organs of the body, including the intestines, stomach, bladder, and blood vessels. In females, there is also smooth muscle in the uterus. When sarcoma is metastatic, prognosis is poor, even with chemotherapy. Half of people diagnosed with metastatic disease STS in the second or third line setting of the major 3 STS subtypes die within 15 months. An analysis of SEER data shows that 14,500 people in the U.S. have metastatic soft tissue sarcomas of the 3 main subtypes
Chemotherapy Treatment
There is a high unmet medical need for improved cancer treatments. Currently, early detection coupled with surgery and systemic chemotherapy is the most effective treatment against most cancers. For metastatic disease, systemic chemotherapy represents the backbone of care for many cancers. However, chemotherapeutic resistance often results in therapeutic failure and eventually death. Not only is chemotherapy often ineffective for cancers that exhibit such resistance, but this approach is also highly toxic for many patients (Cancer Cell Int. 2015; 15:71). Almost all current anti-cancer drug therapies load drug throughout the entire body including classic chemotherapy before surgery (neoadjuvant), after surgery (adjuvant), targeted therapy, antibodies or antibody drug conjugates, liposomal or nanoparticle delivered drugs. Many cancer cells in tumors are located away from blood vessels (referred to as hypoxic regions) and systemic administration of chemotherapy is ineffective at delivering the needed amounts of the medicine to all parts of the tumor. A significant limitation of the current chemical-based anti-cancer treatments is proper drug delivery. Another challenge for systemic approaches is poor absorption or cellular mechanisms in the cancer cell to remove the drugs.
Immunotherapy
Agents that stimulate or block various types of immune cells have generated much excitement and promise in treating cancer. These novel product candidates mobilize the immune system against cancer. There had been significant interest from pharmaceutical companies, physicians and patients in advancing new, immune-based treatment concepts as patients with formerly fatal cancers experienced long-term survival benefits with immune-based treatments. Immunotherapy has shown promise against the most mutated cancers such as melanoma, renal cell carcinoma, squamous cell carcinomas and subsets of lung cancers. However, once promising immunotherapies, such as TIGIT and LAG3, have failed to provide significant improvements over the current PD-1, PD-L1, and CTLA-4 therapies.
Many cancers, however, are also unresponsive to immunotherapy. Even for those cancers that are considered “immunogenic”, many patients are unresponsive. As a result, immunotherapy has not worked well for the majority of solid tumor types, including sarcoma, pancreatic cancer, colon cancer, triple negative breast cancer and brain cancer. At times, when using immunotherapies, the immune system has trouble distinguishing cancer from normal tissue and attacks healthy cells. Thus, the immune therapies induce side effects. To enable more patients to benefit from immunotherapy, new
7
Table of Contents
technologies that are able to improve recognition of the cancer by the immune system, or disrupt the tumor’s ability to evade immune cells, are critical and strongly needed.
Challenges Facing Current Treatments
We believe that an effective cancer treatment must overcome three major problems.
1.The diverse nature of the disease: In most patients, there are two populations of the cancer with different physical properties. The local component is comprised of the well-defined, visual large tumors, seen in x-ray or imaging scans, that invade organs and tissue. The systemic aspect is comprised of cells circulating or implanted throughout the body. Essentially, cancer is often simultaneously both microscopic (unseen) and macroscopic (radiographically seen).
2.Unreachable parts of tumors: Current systemic methods of delivering cancer drugs either orally or intravenously (IV) do not reach many portions of tumors due to a lack of blood supply. These areas are referred to as hypoxic (low oxygen) regions. These areas of the tumor can also impede the influx of immune cells. Intravenous or system dosing of cytotoxic agents suppresses the systemic immune system (Mathios et al, STM 2016) and reduces the potential of immunotherapies.
3.Lack of immune cell recognition and activation by tumor processes to evade: Immune cells have difficulty recognizing/distinguishing cancer cells from normal cells. Cancer also can cloak itself from the immune cells and create barriers to reduce their influx into the tumor.
Our Treatment Approach Versus Current Methods
Current systemic treatment regimens administer either a fixed amount or a set dose based on weight or via an algorithm based on weight and height, such as specific surface area.There is no correlation between height and weight and outcome; however, there is a correlation with survival based on a patient’s number of metastatic sites and amount of bulk disease (total tumor burden). Our treatment concept pioneers a new dosing approach to treating cancer — kill tumors in the body (in situ) to create from the patient’s own cancer a recognizable, high-quality material (referred to as antigen) for better immune cell engagement against the cancer (immunological cell kill).
Our new concept uses a delivery molecule to enable the dispersal of potent drugs throughout the tumor that can also diffuse into the cancer cells. This process effectively loads the tumor with strong killing agents, which are retained within the cells. The active agents themselves used in our product candidate also have properties that improve immune recognition of cancer. At the right dose our product candidates can completely saturate an injected tumor delivering high concentrations of drug into the cancer cells and killing the entire tumor. This process removes the cancer’s cloaking system, decreases the barriers to immune influx and activates a body-wide anti-cancer immune response to attack the uninjected tumors and unseen metastases. Our clinical data suggests that not all tumors need be injected for long term disease control. Figure 1 compares current systemic treatment approaches with our treatment.
Figure 1 – Current Dosing Methods
8
Table of Contents
Through our novel drug treatment and new dosing approach, we hope to transform the lives of patients with cancer. Our objectives are to increase patient longevity, reduce side effects, remove the fear of treatment, empower the patient, and minimize the risk of disease recurrence.
Our Lead Product Candidate: INT230-6
Our lead product candidate, INT230-6, is primarily comprised of three components: (i) cisplatin, a proven anti-cancer cytotoxic agent, (ii) vinblastine sulfate, also a proven anti-cancer cytotoxic agent, and (iii) SHAO, a penetration enhancing amphiphilic molecule. Both cisplatin and vinblastine sulfate have direct cancer cell killing and immune activating mechanisms of action. The SHAO chemical structure is shown in Figure 2 below. Our in vivo safety studies show that if the drug is injected into healthy tissue there is no observation of tissue damage (skin, liver or peritoneum). The drug agents enter the blood stream at low doses. The unique amphiphilic SHAO compound formulated product candidate increases the dispersion of the drug throughout the tumor following intratumoral injection. Our technology is novel and unique, and is not a liposome, a nanoparticle, or an emulsion. INT230-6 is a 100% water-based formulation with tissue dispersion properties that do not destroy cancer cell membranes.
Figure 2 – INT230-6
The SHAO molecule facilitates drug dispersion throughout the tumor and facilitates their diffusion into the cancer cells. Once in the cancer cell one drug cisplatin binds the DNA and causes the cell apoptosis (death) whereas the other
9
Table of Contents
agent, vinblastine sulfate, destroys the cell’s tubulin to shut down replication. Data in humans suggests that when administered at the proper drug dose to tumor volume ratio, a significant portion of the injected tumor can be killed on a single dose. There is evidence (in both animals and humans) that there is an activation of the immune system for certain cancers.
Our novel technology is different than other IT approaches in four important ways:
1)We recognized that the composition of a tumor is highly unfavorable to direct injection of water-based products because the tumor has a high fat content and is under surrounding pressure. To be effective, an IT drug must disperse, be absorbed by the tumor and enter the cancer cell. Without our unique formulation chemistry water soluble drugs are not readily dispersed or absorbed by a tumor.
2)Our delivery technology is based on a proven science that uses amphiphilic molecules to transport drugs through tissue. The active drug agents in our lead product candidate (cisplatin and vinblastine sulfate) are established, commercial, potent killing agents with immune stimulating properties that as of now are only used as IV products. Both cisplatin and vinblastine sulfate have dual direct killing and immune activating mechanisms of action. Cisplatin binds to DNA to cause apoptotic cell death and also attracts and binds T-cells via TL9 receptors. Vinblastine sulfate destroys tubulin to stop replication and also induces dendritic cell maturation.
3)Unlike other IT products, our product candidates have multiple opportunities well beyond skin tumors, such as melanoma. Our lead product candidate, INT230-6, has shown the ability to kill tumors deep in the body such as in the liver, lung, and peritoneum. The product candidate has also demonstrated ability to kill tumors from several cancer types with abscopal effects and increased overall survival compared to historical results in Phase 1/2 studies.
4)Our product candidate has potential to kill tumors in a manner and could be used before surgery immediately after diagnosis or for treatment of cancers where there are no therapeutic agents or suitable local treatments available.
Preclinical Data
Our first research studies in mice were conducted with contract research organizations (“CROs”). The Company collaborated with the Vaccine Branch of the National Cancer Institute (“NCI”) in Bethesda, MD. The research with the NCI was established after the National Institutes of Health awarded us a CRADA. The program culminated with the publication of a paper in July 2019 that was jointly authored with the NCI. In that publication, we reported that INT230-6 treatment resulted in regression from baseline in 100% of the tumors and complete response in up to 90%. Experiments showed a critical role of T-cells in promoting complete tumor regression. Mice with complete response were protected from subcutaneous and intravenous re-challenge of cancer cells. Thus, immunological T-cell memory was induced by INT230-6.
As part of our own research, we formulated cisplatin in water without the SHAO and added a noncolloidal dye. When injected into a human pancreatic tumor grown in a mouse model, we observed that the water formulation of the drug without the SHAO was not absorbed in the tumor. The liquid mostly leaked from the tumor. However, the formulation that incorporated SHAO was readily and rapidly absorbed by the tumor in a dose dependent manner as shown in Figure 3 below.
10
Table of Contents
Figure 3 – Comparison of drug dispersion/absorption in tumors with and without our DfuseRx technology.
Dense human pancreatic cancer BXPC-3 tumors were grown in severe combined immunodeficiency mice. Injections using a metered pump of the cisplatin with dye in water were compared to INT230-6 with dye. Fourteen mice were treated. INT230-6 is well absorbed and distributed throughout tumors (right side images) compared to the drug alone in water which leaks out (left side images). Data published in the International Journal of Molecular Sciences June 2020 doi.org/10.3390/ijms21124493.
In addition to formulation experiments we conducted growth inhibition experiments using large tumors (>300 mm3) and treated with low drug doses. Typically, research conducted by other companies developing cancer products use small tumors (25 to 100 mm3). Such companies also often use large drug doses in their studies with drug amounts that are five to fifty-fold above our dose amounts. Our product candidate can completely eradicate murine tumors, an effect that is termed a complete response (“CR”). Most competitors show only a slowing down of the tumor’s growth rate over time.
INT230-6 regresses tumors over time as shown in Figure 4 panel A and extends animal life compared to the drugs given alone intratumorally at the same dose without our technology. In addition, our drug candidate shows superior efficacy given intratumorally compared to dosing the drugs intravenously. Often animals with a CR are permanently protected against the cancer. This means upon re-inoculation with the same cancer new tumors do not grow. The protective effect happens whether the cancer cells are reinoculated under the skin or administered intravenously indicating a broad systemic immune protection.
Through our research collaboration with the NCI, we generated data regarding the mechanism of action for our lead product candidate. INT230-6 shows direct tumor killing and immune cell activation. The direct tumor cell death is caused by action of the two potent agents (cisplatin and vinblastine sulfate). Data generated to date indicates infiltration of dendritic cells into the tumor which can present antigen to activate CD8 and CD4 immune T-cells against the cancer. Survival and tumor eradication are mostly driven by CD8+ T-cells. Thus, our product candidate generates high quality, vaccine-like antigen from the attenuated tumors to promote the immune activation. The Company also published data showing increases in dendritic cells, macrophage, T-cells and Natural Killer (“NK”) cells 10 days after intratumoral treatment in mouse colon tumors. Selective immune depletion of CD4 and CD8 abrogates the therapeutic effect. Figure 3 panel B that shows the influx of various immune cell into the tumor microenvironment.
The scope of the NCI studies was to assess growth inhibition, survival and immune activation. Naïve mice were SC challenged with 1 × 106 C26 cells into the right flank. Vehicle or INT230-6 (0.5 mg/ml cisplatin, 0.1 mg/ml vinblastine sulfate, 10 mg/ml IT-006 cell penetration enhancer also referred to as SHAO) were intratumorally (“IT”) administered into 300 mm3 (approx. 8.5 mm in diameter, 100 μl/400 mm3 C26 tumor) SC tumors (n = 10/group) for 5 sequential days (day 0 to 4) and tumor growth was monitored. The fraction 5/10 indicates the number of complete responders. The log rank test indicates a significant difference between the groups (p<0.0001).
11
Table of Contents
Figure 4 — Mouse data showing tumor reduction and immune activation
In Panel A on the left, 100% of animals receiving INT230-6 treatment for 5 days have a slight increase followed by a decrease from baseline, with 50% of animals having a complete response compared to no treatment controls with no decrease or complete responders (data generated by the NCI see OncoImmunology 2019 Vol 8 No 10; 15). Panel B cell staining shows an increase in the immune infiltrates. Data from Int. J. Mol. Sci. 2020, 21, 4493.
INT230-6 is Synergistic with Checkpoint Blockade
Nature has created checkpoints on the immune system to regulate the activity of the immune cells. These pathways are crucial for self-tolerance to prevent the immune system from attacking healthy cells indiscriminately. Large pharmaceutical companies such as Merck, Roche, AstraZeneca, Pfizer and BMS have developed new types of anti-cancer anti-body drugs with the ability to modify and block the checkpoints on the immune system.
Our results show strong benefit in regressing tumors with the combination of INT230-6 and checkpoint inhibitors which leads to improve survival. The data showed the combination of our product candidate with either anti-PD-1 or CTLA-4 antibodies in a dual tumor (metastatic) cancer mouse resulted in additive benefit. The data was generated by our partners at the National Cancer Institute and under our CRADA and published (OncoImmunology 2019 Vol 8 No 10; 15).
Preclinical Good Laboratory Practice Safety of INT230-6
During a meeting in 2014 with the FDA we reached agreement on an accelerated safety and manufacturing program. We successfully completed the needed tasks to begin clinical testing that included conducting pharmacology studies (showing activity of the drug), toxicology studies in two animal species, analytical methods development, manufacturing scale up, and regulatory submissions. All these steps were completed by 2015. The data showed that the use of SHAO did not change or increase the toxicity of cisplatin or vinblastine sulfate. Analytical results showed the two drugs remain unchanged chemically when INT230-6 is stored properly, which is in a standard freezer at -20°C.
Clinical Regulatory Interactions
In the United States, the FDA regulates drug and device products under the Federal Food, Drug, and Cosmetic Act and its implementing regulations. We filed our IND application for our IT-01 Study entitled “A Phase 1/2 Safety Study of Intratumorally Administered INT230-6 in Adult Subjects with Advanced Refractory Cancers” and held a meeting with senior FDA officials in November 2016. In December 2016, the FDA provided us a “Study May Proceed” letter.
We also met formally with the Health Canada in a CTA meeting in 2016. We filed the CTA and held meetings with senior Health Canada officials. Health Canada provided us a “No Objection” letter in early 2017. As we have progressed our study, we filed several amendments since 2017 and have received “No Objection Letters” each time from Health Canada. We have been treating patients continuously under both our IND and CTA since May 2017.
The regulatory agencies agreed to permit setting the drug dose based on tumor volumes rather than using alternatives such as dose based on a patient’s height and weight. Our belief is that using the patients’ total tumor burden (“TTB”) instead of body size is a more personalized and precise approach to ensure that patients receive an appropriate dose for their unique cancer burden. Better dosing could lead to maximized efficacy with minimized side effects. In our clinical trial, tumor volume is calculated from radiographic imaging on target tumors at baseline. Dose for a given tumor is set based on its size.
12
Table of Contents
Clinical Trials
Phase 1/2 Refractory or Metastatic Cancer (“IT-01 Study”)
The IT-01 Study, was completed in 2023. The study design permitted our product candidate to be tested in several different cancer patient populations with dosing into both superficial e.g. squamous cell, thyroid, breast, head and neck, lymph, skin, and deep body cancers such as those found in pancreatic, uterus, liver, kidneys, colon, bile duct, fat, muscles (sarcoma) and lung. The clinical trial sought to determine the safety and potential efficacy of dosing INT230-6 directly into several different types of cancers. We tested our product candidate in over 20 different cancer types.
Safety
The Phase 1/2 study treated refractory patients, who failed multiple lines of therapy. One hundred ten (110) subjects were treated in the IT-01 Study. The results of the escalation portion, which included up to 175 mL per session every two weeks, indicated a favorable safety profile of INT230-6 with or without immunotherapy, with only 7 patients out of 64 on INT230-6 alone experiencing grade 3 related adverse events. The most frequent related adverse events include localized tumor related pain.
The majority of treatment related adverse events have been low grade (grade 1 or 2). A total of 15 patients out of 110 (13.6%) had at least one grade 3 adverse event in the IT-01 Study. The primary grade 3 events have been pain, fatigue vomiting anemia, rash, dehydration and dizziness. There was one grade 4 adverse event, a decrease in the number of neutrophils, the most common type of white blood cell that contributes toward the healing of damaged tissues and resolving infections. There were no grade 5 treatment related adverse events reported. No maximum tolerated doses were established.
Even though our product candidate is dosed directly into the tumor, a key element of safety is to observe how much drug enters the bloodstream. Toxicities are linked to the circulating levels of the active agents in the blood. We measure circulating concentrations of the three main ingredients, SHAO, cisplatin (as platinum metal) and vinblastine sulfate, in the blood. This type of data is referred to as pharmacokinetics (“PK”). Data that measured the circulating levels of the key ingredients has been generated from the ongoing study in metastatic patients. The amount of vinblastine sulfate seen in plasma of patients is much lower than a lesser dose given IV. Cisplatin is reduced to metal rapidly and is challenging to measure in blood even for IV dosing. A measurement of vinblastine sulfate provides a better understanding of the PK.
In our study, vinblastine plasma concentrations increased proportionally to the amount of drug administered. In essence, the concentration of vinblastine seen in the blood increased proportionally to the dose given intratumorally. See Figure 5 Panel A. This effect is independent of the cancer type and highly reproducible. As would be expected, the amount of the vinblastine seen in the plasma when given intratumorally was less than 5% of the blood concentrations had the drug been given intravenously. Our two highest average doses of INT230-6 were 118 mL and 80 mL. These dose volumes contain 11.8 and 8 mg of vinblastine sulfate and result in 9 and 6.8 nanograms per mL of vinblastine in blood plasma, respectively, at one hour post-dose.
At six hours post-dose, the amount dropped to about 3 and 2.2 nanograms per mL. Publications show the plasma concentration of a standard dose of vinblastine sulfate (6.5 mg for an average sized person) can be estimated. Based on pharmacokinetic studies of vinblastine in the literature (Links, M., Cancer Investigation Volume 17, 1999 – issue 7479-485), we estimated a vinblastine plasma level of 240 ng/mL at 6 hours for an IV dose of ~5.1 mg. Comparing our blood plasma concentration profile for vinblastine at various doses to the data from the Links cancer investigation indicates that >95% to 99% of the drug remained or degraded in the tumor post injection depending on the dose.
Cisplatin degraded rapidly. Measures of platinum metal are used in lieu of cisplatin for PK analysis as shown in Figure 6 Panel B. This drug retention in the tumor spares the patient the debilitating side effects of circulating drug. Indeed, the low observed plasma levels of the potent agents following INT230-6 dosing correlates with the low grade of side effects observed. Thus, IT dosing INT230-6 compares favorably to the toxicities normally associated with cisplatin and vinblastine sulfate when given intravenously at comparable doses.
13
Table of Contents
Figure 6 — Free vinblastine levels and platinum metal in blood plasma over time for intratumorally administered INT230-6.
Cytotoxic components in INT230-6 have minimal systemic exposure and short half-life. Most of the active drug remains in the tumor as a result INT230-6 appears to have favorable safety data to date.
Response Evaluation Criteria in Solid Tumors (“RECIST”) for Efficacy
A standard way to measure how well a cancer patient responds to a treatment is based on whether tumors shrink, stay the same, or get bigger. Efficacy assessments for evaluating changes in tumor size in clinical trials are typically conducted with standardized oncology response criteria, for example, Response Evaluation Criteria in Solid Tumors known as RECIST or a newer version 1.1 (RECIST 1.1). There are additional guidelines for immunotherapeutic trials (“iRECIST”). These criteria measure the change in longest diameter of tumors to assess drug response. An increase in longest diameter of > 20% is considered progressive disease. The rationale behind this is that tumors should generally become smaller. The main benefit of iRECIST is to afford physicians the opportunity to confirm progression with a follow up scan of the tumors 1 to 2 months later. However, both RECIST 1.1 and iRECIST criteria were designed only to assess response to systemic therapies.
Our study initially employed RECIST 1.1, and subsequently, iRECIST methods for determining the efficacy of INT230-6. INT230-6 induced tumor regression in both injected and non-injected lesions in several patients. However, tumors often increased in the longest diameter prior to shrinking using our drug, which we attribute to three factors.The first is high absorption by the tumor of our drug. Prior to the first efficacy scan, during the first two months (after 5 sessions) of INT230-6 treatment, patients would have received depending on the cohort a dose volume of drug injected into the tumor equivalent to 25% to 250% of the tumor’s volume. The second factor is an infiltration of immune cells into the tumor that can increase the longest diameter.Finally, tumors can become cystic. We have reported these data at major medical conferences (ASCO 2021, 2022, 2023, CTOS 2022, 2023) to indicate that RECIST methodology may be an inaccurate measure of clinical benefit for intratumoral INT230-6.
Tumor Death (Necrosis)
Cisplatin causes apoptotic cell death leading to necrotic tissue, and vinblastine sulfate destroys tubulin, which is needed for cell replication. Investigators report significant necrosis (dead tissue as evidenced by reduced contrast uptake in the CT image) in many injected tumors including adrenocortical, breast, chordoma, colon, head and neck, lung, sarcoma and squamous cell. Figure 7 below is an example of a squamous cell tumor that became necrotic by the 2-month scan. The darker contrast of the tumors indicated that significant necrosis of the tumor occurred following treatment.
14
Table of Contents
Figure 7 — Images showing that INT230-6 induces tumor necrosis (death) in the injected tumors.
The patient in these images had a squamous cell carcinoma. His cancer continued to progress after 2 surgeries, radiation, and chemotherapy. The patient enrolled in our study in January 2018 with two 10 cm3 deep tumor nodules in his upper arm muscle. The hospital recommended total arm and shoulder amputation. This subject received 4 intratumoral injections equal to 100% of his 2 tumors’ volume. The drug was dosed at ratio of 1 mL per 4 cc of tumor. In the red circle in the left panel there is bright contrast indicating active cancer. At the first scan on May 15, 2018, there was an increase in tumor size, significant necrosis (lack of contrast) and inflammation observed (right panel). This patient has retained his arm and shoulder and is alive as of the last follow up visit in December 2022.
Abscopal Effects
In the metastatic study several subjects showed tumor size reduction of non-injected lesions in lymph nodes, liver, lung, perineum, and retroperitoneal areas (i.e. abscopal effects to visceral lesions). The apparent abscopal effect was seen primarily in patients that received a dose greater than 40% of their TTB. Abscopal effect rates may be even higher than known. Sites did not report existing tumors under 1 cm in diameter. In addition, many tumors above 1 cm were not followed and unreported. We captured images from all subjects to be able to determine the true abscopal effect in all subjects at a future time and this analysis is in progress. Figure 8 below shows uninjected tumor diameter changes over time of patients with confirmed reports of abscopal effects.
Figure 8 — Change in longest diameter of uninjected tumors over time (abscopal effects) monotherapy subjects only.
Tumor Diameter and Corresponding Volume
For injected tumors, changes in longest diameter often do not correlate with changes in volume. Dosing is completed just prior to their first scan when the increase in tumor diameter is most likely to be highest. As noted above, RECIST
15
Table of Contents
measurements of whether a patient’s cancer is stable, decreasing or progressing are based on the changes in the tumor’s longest diameter. An increase in longest diameter above a threshold would indicate progression. In Figure 9, the graph on the left shows the change in individual tumors’ longest diameter over time. The graph on the right shows the same tumor’s volume over time. Tumors in many patients treated with INT230-6 can show an increase or no change in longest diameter with a decrease of the corresponding tumor’s volume. There is also a much greater volume decrease than expected for the slight decrease in longest diameter. In some cases, tumors can become cystic, which on imaging looks like a large increase. The increase in size was seen on scans until cystic tumors were drained. These data provide further evidence that RECIST may not be a good indication of efficacy for INT230-6.
Figure 9 — Chart showing that use of INT230-6 may increase tumor’s longest diameter while decreasing the tumor’s volume (sarcoma patients only).
In the left figure each color represents the change in diameters of an individual patient’s group of tumors. In the right figure the same color represents that same patient’s change in tumor volumes.
Visualizing a change in 3 dimensions also shows the limitations of using RECIST methods for determining efficacy for intratumoral INT230-6. Figure 10 shows the scan of a sarcoma patient’s tumor pre- and post-dosing. The longest diameter declines by 15%, while the second longest diameter declines 42%. Using RECIST criteria, this patient would have been classified as having stable disease, whereas the World Health Organization, which uses the two longest diameters, would classify this patient as having had a partial response, which is a better outcome.
Figure 10 — Scan showing change in two longest diameters of an injected sarcoma tumor at the base of the spine.
We believe that RECIST measurements (longest diameter) are inappropriate to capture efficacy with INT230-6. As a result, overall survival, the FDA’s gold standard efficacy endpoint, is a better measure of INT230-6’s performance in metastatic cancer.
16
Table of Contents
Disease Control Rate
Even though RECIST was deemed to be less accurate for measuring efficacy, a secondary objective of the IT-01 Study was to assess the preliminary efficacy of INT230-6 by measuring the disease control rate (shown below) based on the RECIST and immune RECIST (“iRECIST”) criteria.
Monotherapy cohorts Disease Control Rate
Prior treatment
Survival — Phase 1 Basket Studies
The primary objectives of Phase 1 trials are to define the safety or toxicity profile of a new drug and to determine the dose for further evaluation in Phase 2 trials. Patients enrolled in Phase 1 are therefore placed at risk of toxicity, in exchange for an undefined and limited clinical benefit. Furthermore, patients who are considered for Phase 1 trials may be regarded as vulnerable because their physical condition may be deteriorating due to advanced cancer malignancy for which no further standard treatment options exist. Efficacy is not usually the primary objective. Most patients in Phase 1 studies have low survival expectations that ranges from 3 to 8 months depending on the type of cancer and the patient’s incoming health. (see Chau, N., BMC Cancer volume 11, Article number: 426 2011).
Over the past two decades the development of a prognostic score to predict survival of patients treated in Phase 1 studies has been completed and validated by the Royal Marsden Hospital in the United Kingdom (the Royal Marsden Hospital Index, or “RMHI”). The score, which is comprised of 3 risk factors (number of metastatic sites, size of tumors and nutritional levels). Scores range from 0 to 3, and are highly correlated with overall survival (“OS”). A score of 0 suggests the longest potential survival, and a score of 3 is the worst. Many studies show that subjects enrolled in Phase 1 have a survival of under 6 months when RMHI scores greater than or equal to 1. Over 75% of patients in our study had a score of 1 or 2.
In our IT-01 Study, patients were enrolled whose cancer progressed following treatment using all approved and some experimental therapies. Forty-three (43%) of patients had previous had an IV form of a platinum-based drug including cisplatin. Forty-four percent (44%) had previously received an anti-PD-1 antibody. Efficacy data from 64 patients enrolled in the IT-01 Study is available from patients receiving INT230-6 alone (referred to as monotherapy). There were over 820 different tumor injections conducted over the course of the trial with over 502 being into visceral deep tumors.
The IT-01 Study was a Phase 1/2 dose escalation (i.e. the Phase 1 basket portion) and Phase 2 (expansion of specified cancer types). There was no control arm in the IT-01 Study and no randomization though patients were enrolled with random tumor burdens and random cancer types. Therefore, there is no formal comparator to determine the significance of any given endpoint. See Table below for the patient population.
17
Table of Contents
Final INT230-6 monotherapy population (n=64) in the IT-01 Study
Type of Cancer MonotherapyNumber of Patients MonotherapyPercent of Population
Skin (Melanoma/Merkle) 6 9%
Squamous cell carcinoma 6 9%
Colorectal 5 8%
Breast 4 6%
Head and neck 4 6%
Ovarian 4 6%
Pancreatic 4 6%
Cholangiocarcinoma 3 5%
____________
aOthers include: Adrenocortical carcinoma, Anal, Bladder, Cervical, Eccrine, Lung, Metastatic Cancer of Unknown Primary, Pseudomyxoma peritonei, Renal, and Thyroid.
Patients receiving a monotherapy dose of INT230-6 above 40 percent of their TTB measured in cubic centimeters had statistically significantly longer survival than patients who received treatment to less than 40% of their TTB. The subjects receiving a dose >40% of their total incoming tumor burden also lived much longer than would be expected for patients in a Phase 1/2 basket study. These data indicate a potentially active drug. Given the small size of the population, the heterogeneity of the cancers and variability of the incoming tumor burdens, the high and low dose groups may have been different in a way that we may not have been able to measure. We observed a strong overall survival signal in just sarcoma patients; however, this Phase 2 population size was also too small to properly assess effectiveness of INT230-6. Based on the analysis of strong absorption of our drug by the tumor and the ignition of the immune system, we have determined that overall survival was most appropriate for our Phase 3 study. OS is the FDA’s preferred endpoint for cancer clinical trials to prove efficacy.
The probability of survival for a given population can be plotted. Figure 11 panel A below illustrates the survival for all monotherapy INT230-6 subjects. See Table below for the patient population.
Treating only with our drug candidate, approximately 50% of patients would be expected to be alive at one year (blue curve) with a median overall survival (“mOS”) expected of 11.9 months. Subjects dosed an amount of INT230-6 that was less than 40% of their TTB had a mOS of 3.1 months. This result is shown in the red curve and is comparable to survival expected in historical Phase 1 basket studies (See Chau, N., BMC Cancer volume 11, Article number: 426 2011). Patients that received a dose of INT230-6 to greater than 40% of their TTB had a ~63% chance of being alive at 1 year and the median overall survival was 18.7 months. These results indicate that survival improves for those dosed to greater than 40% of their TTB compared to those receiving under 40%. While there were no differences statistically in the two populations with regards to incoming tumor burden; the sample size is small and the average values for the green curve was lower.
18
Table of Contents
Figure 11 — Kaplan Meier Estimates of Sarcoma Patient-Survival Dosing INT230-6 in the IT-01 Study
Exploratory analysis of dose relative to TTB was conducted. Many tumors, including all under 1 cm in diameter, were not reported and so TTB is likely underestimated.
In the IT-01 Study, survival appears to be impacted by the total dose a patient received relative to the number and size of their tumors. Patients receiving a higher percentage of INT230-6 (mL) relative to their TTB (cm3) remained in the study longer regardless of the cancer type. The analysis using 40% of tumor burden was arbitrary; however, the conclusion from the data is that the more INT230-6 that was administered and the more tumors injected, the more likely a subject would be alive longer for a given tumor burden. In the Phase 3 study, the physicians are advised to treat as many tumors as are safe to inject.
Biomarker Analysis
A cancer cell’s surface expresses a unique set of proteins specific to the patient and their cancer type. Certain immune cells can “read” the cell surface to create a patient-specific immune response. However, as noted above, live cancer cells can send signals that can block the immune cells from entering the tumor. There is a constant “cat and mouse” battle between the cancer cell and the immune system.
Other local treatments such as radiation or ablation destroy the cell surface. Our technology disperses potent killing agents throughout tumors and enables the potent killing agents to diffuse into the cancer cell without damage to the cell membrane. When the tumor’s cancer cells are dying or no longer alive, the ability of the immune system to identify the cancer and mount a response can be increased.
In our prior studies, we collected tumor tissue before and after dosing of our drug candidate from patients injected tumors. We analyze for live and dead cancer cells (referred to as necrotic cells). Our data shows that our drug candidate can kill cancer cells over a few days to a few weeks and activate an immune response. We have observed these effects in multiple cancer types.
Methods used
In the IT-01 Study, INT230-6 injections were conducted on the first treatment cycle’s first day (“C1D0”) and on the fourteenth day (“C1D14”). Pre and post-dose biopsies from the same injected tumor were obtained on C1D0 and again 28 days later just prior to the 3rd dose on the first day of the second treatment cycle (“C2D0”). To determine the percentage of viable tumor cells and necrotic (dead) cancer cells pre and post two treatments, we conducted analysis on the collected tissue following hemotoxylin and eosin (“H&E”) staining. H&E tissue analysis helps identify different types of cells and provides important information about the pattern, shape, and structure of cells in a tissue sample.
19
Table of Contents
For many patients, we observed substantial reductions of cancer following the two injections of INT230-6 alone. Below are data on cell killing and immune activation from the two cancer types, breast cancer and sarcoma. We also use immunohistochemistry (“IHC”) staining to help assess cancer and various immune cell populations, as well as the degree of cancer cell proliferation in the treated tumors.
Necrosis Results in Breast Cancer
Figure 12 shows tissue taken from a metastatic breast cancer patient from the IT-01 Study. The pre-dose C1D0 samples stained positive (dark purple) indicating significant amounts of cancer throughout the sample. However, 28 days later C2D0, there was almost no cancer observed in the collected tissue. Magnification is 400μ.
Figure 12 — Images from match pair biopsied tissue samples pre and post two INT230-6 injections:
Immune Response in Breast Cancer
In preclinical studies, our technology reduces cancer levels substantially and causes an influx of immune cells into the tumor. The below images from a breast cancer patient confirm that this effect also occurs in humans. Applying a special set of stains to the biopsied tissue enables the measurement of immune cells inside the tumor. We observe infiltrating immune cells in the tumor. In Figure 13 (below) the first panel (Image A) shows extensive cancer (blue color) (DAPI) and a marker of live and proliferating cancer. The green and yellow colors represent immune cells. The second panel (Image B) shows that 28 days after two doses there is a markedly reduced amount of live cancer (less blue stain). In addition, the green/yellow stained cells, representing CD4 and CD8 T-cells, are increased throughout the entire tissue.
Figure 13 — IHC Staining of breast cancer tissue for immune cell infiltration pre- and post-dosing of INT230-6
Necrosis Results in Sarcoma
Several patients with metastatic soft tissue sarcomas were enrolled in the IT-01 Study. As was seen with breast cancer and multiple other tumor types, there were substantial reductions of cancer in the biopsies pre- and post-dosing. As shown in Figure 14. Image A is the stained tissue sample (pre-dose) that shows significant cancer (dark purple cells) throughout the tissue sample. Image B is the stained tissue sample taken on day 28 after two doses of INT230-6 (day 0 and day 14) that shows significant reduction in the live cancer (Magnification 3.7x).
20
Table of Contents
Figure 14 — Images from match pair biopsied soft tissue sarcoma subject 010-001 pre- and post-two INT230-6 injections
Image A Image B
Immune Response in Sarcoma
We also measured DAPI and activated T-cells from a sarcoma tumor. The results again confirm that for this non-immunogenic tumor type, there is also a substantial reduction of cancer cells as seen by the decrease in the marker post INT230-6 treatment. Figure 15 shows the influx into the tumor of CD4 and CD8 T-cells at 28 days following the first dose.
Figure 15 — Staining of biopsied sarcoma tumor tissue pre and post dosing of INT230-6
Image A - Pre-dose Image B - Post-dose
The results of the H&E analysis and the multiplex IHC staining show substantial cancer cell reduction, decreases in proliferation, and increased immune infiltration after INT230-6 treatment. The totality of the data indicate the drug has the ability to kill cancer and increase the immune response in sarcomas.
INT230-6 Efficacy in Soft Tissue Sarcoma
Sarcomas are a rare and heterogeneous group of solid tumors derived from mesenchymal cell origin. Although single agent or combination anthracycline-based chemotherapy provides some benefit for the treatment of advanced sarcomas, prognosis is still unfavorable with median overall survival in the second and third line setting of 11 to 16 months and there is significant unmet medical need. By the time subjects fail approved therapies and enter Phase 1 studies patients’ median overall survival is typically 8 to 10 months (see Subbiah, V Scientific Reports | 6:35448 | DOI: 10.1038/srep35448) depending on certain risk factors such those found in the RMHI score, and sarcoma subtype.
Thirty patients with sarcoma were treated in the IT-01 Study. Fifteen received INT230-6 monotherapy and 15 received INT230-6 with immunotherapy. Enrolled subjects receiving INT230-6 had a median of 3 (0, 8) prior therapies, median age of 64 and 13% were ECOG 0, 80% ECOG 1. Those receiving the combination with ipilimumab had a median of 4 (0, 9) prior therapies, median age of 64 and 38% were ECOG 0, with 62% ECOG 1.
21
Table of Contents
The sarcoma types were leiomyosarcoma, liposarcoma, pleomorphic sarcomas, chondrosarcoma, chordoma, spindle cell sarcoma, fibrosarcoma, osteosarcoma, myofibroblastic sarcoma, desmoid type, and Kaposi sarcoma. The INT230-6 dose delivered at a single visit was up to 242 mL (112 mg of cisplatin, 24.2 mg of vinblastine sulfate) into one or more tumors. The vinblastine given exceeded the typical 5.1 mg starting IV dose for an average size person. The CIS given was equivalent to a typical IV dose. Safety in sarcoma population remained favorable. The most common treatment-related adverse events (TRAEs) in evaluable monotherapy subjects were localized pain, fatigue, decreased appetite, nausea, most of which were low grade.
We compared our Phase 1/2 basket study survival data in soft tissue sarcoma (“STS”) to overall survival data generated from three published clinical Phase 1/2 basket trials in sarcoma. In our IT-01 Study, fifteen (15) STS patients received only INT230-6 monotherapy and 14 have received the combination with ipilimumab. The 3 studies used were:
•Jones Cancer Chemother Pharmacol (2011) 68:423 – 429, Clinical benefit of early Phase clinical trial participation for advanced sarcoma patients.
•Cassier et. al., Annals of Oncology 25: 1222 – 1228, 2014 Outcome of patients with sarcoma and other mesenchymal tumours participating in Phase I trials: a subset analysis of a European Phase I database.
•Subbiah et. al., Scientific Reports | 6:35448 2016, Evaluation of Novel Targeted Therapies in Aggressive Biology Sarcoma Patients after progression from US FDA approved Therapies.
Each of these publications report use of the RMHI. As noted above the RMHI is validated score predictive of overall survival for cancer patients in basket studies. A subject obtains 1 point depending on their number of metastatic sites, pre-dose plasma lactase dehydrogenase level and albumin concentrations. Each of the 3 studies report the median overall survival results for subjects for various RMHI values as shown in the table below.
Median OS in Phase 1 Basket studies
Study Jones Cassier Subbiah
Median OS 7.6 months 9.1 months 9.6 months
____________
*44% of Subbiah study subjects had a RMHI score of 0 versus 26% in Sponsor’s IT-01 Study
Though the sarcoma subtype mix between the 3 literature study populations is not matched exactly, mOS from the Jones, Cassier and Subbiah studies are similar. Subbiah reports the overall survival of sarcoma patients for a given RMHI score (Figure 16 below) from the publication shows the strong correlation between RMHI score and overall survival.
Figure 16 — Overall Survival based on RMHI scores in soft tissue sarcoma (Subbiah data)
We were able to estimate the RMHI score in our study for each patient receiving only INT230-6. Subjects in our study primarily had a RMHI score of 1 (33%) or 2 (40%). To be more confident that we are matching the population when
22
Table of Contents
comparing our drug to the Subbiah population, we created a synthetic Kaplan-Meier control curve from the Subbiah dataset that approximated our patients’ RMHI score distribution (Figure 17 below). We chose Subbiah as the dataset, because it was the study that reported the longest survival of the three Sarcoma studies, and would be the most conservative data to serve as the basis for a synthetic control.
We calculated the Kaplan-Meier synthetic control derived from the Subbiah basket trial matched to the IT-01 Study sarcoma population’s RMHI scores for all INT230-6 monotherapy patients that predicted our sarcoma patients should have had a median survival of 6.7 months.
Figure 17 — Survival of INT230-6 monotherapy sarcoma patients
Estimates of sarcoma subject survival using INT230-6 based on dose per TTB from the IT-01 Study compared to a synthetic control are shown in the table below.
Phase 2 Presurgical Breast Cancer Study (“INVINCIBLE-2 Study”)
In March 2021, we began a Phase 2 Randomized, Window of Opportunity trial evaluating clinical and biological effects of intratumoral INT230-6 against no treatment (the SOC) in early-stage breast cancer patients awaiting surgery. The study completed enrollment and the database was locked in November 2023. The key efficacy endpoints were to (i) compare necrosis levels in tumors based on size and dose compared to saline control, (ii) the percentage of subjects having a greater than 50% reduction of viable cancer cells in their tumor compared to control, and (iii) the percentage of subjects who achieve a cell cycle arrest, defined as a reduction in the proportion of cells staining positive for Ki67, a widely used marker of cancer cell proliferation for systemic therapy. According to our estimates using the National Cancer Database, approximately 40% of patients diagnosed with breast cancer annually, there are nearly 100,000 that have no therapeutic treatment following diagnosis. Women undergoing surgery typically wait approximately 2 to 6 weeks to have the procedure.
The trial was a two-part Phase 2, randomized, open label, multi-center study that has completed enrollment of 91 patients with early-stage breast cancer. In part 1, twenty-nine patients were randomized 2:1 to treatment or no treatment. Those in treatment received either up to three doses of INT230-6 on days 1, 8 and 15 post diagnosis or no treatment, the current SOC prior to resection. Part 2 of the study randomized patients 2:1 to one intratumoral injection of either INT230-6 or saline solution. IT-02 was conducted under the direction and supervision of Principal Investigator, Dr. Angel Arnout. The Ottawa Hospital conducted all subject enrollment, treatment and pathology for necrosis. The Ontario Institute of Cancer Research analyzed subject immune responses, Ki67 and conducted immune biomarker analysis. Ozmosis Research
23
Table of Contents
Inc., a Toronto-based CRO, managed the data and study in Canada. Intensity funded the trial and provided INT230-6 supply. There were no milestone payments, royalties or other compensation to be paid to any party. The agreement provided that each party will solely own any inventions generated in the clinical trial that relate solely to intellectual property owned by that party.
In study IT-02, the treatment group had a highly statistically significant increase in necrosis (tumor death) compared to the saline control group of 19% for the treatment group versus 1.3% for the saline control group (p=0.0002). For tumors with diameter of 2 cm or higher in longest diameter the treatment group had an average of 24% necrosis in 42 subjects vs. 0.8% for the saline control group in 8 subjects (p=0.0007) .In the study nine (9) subjects in INT230-6 treatment groups had a major pathological response (MPR) with a mean of 79.4% tumor necrosis. MPR is defined as having less than or equal to 50% residual cancer in the tumor (i.e. ≥50% of the tumor became necrotic). In the control groups, no subjects achieved an MPR (n=29).
Tumor Necrosis via Diffusion
Tissue taken via biopsy from tumor in the IT-01 Study shows that viable cancer cells are significantly reduced. However, in our INVINCIBLE 2 study, surgeons also removed the entire breast cancer tumor following INT230-6 injection. At the San Antonio Breast Cancer Symposium (“SABCS”) in December 2023 images showed that up to >95% of an entire large tumor greater than 4.3 cm can be killed on a single INT230-6 injection at the proper dose (in milliliters) relative to the size of the size of the tumor (in centimeters).
This result is seen in Figure 18 panel A and B. An ER+PR+HER2+ 3.9 cm grade 3 invasive ductal breast cancer tumor was treated on day 1 with 7.4 cc of INT230-6. Seven days later with another 14.8 cc. The tumor was then resected another seven days later. In panel B, a ER+PR+Her2- 4.4 cm diameter invasive lobular breast cancer tumor was treated with one dose of 21.3 mL of INT230-6, then resected 20 days later. The INT230-6 was able to kill 85% of the ductal tumor from Panel A. However, in the second panel, the drug was able to diffuse throughout nearly the entire tumor. The boundary of the tumor is shown by the black dotted lines and the red dotted lines show the extent of the necrosis. Pathology conducted on the excised tumor showed that there was only a small percentage of viable cancer cells in one area of the 4.4 cm tumor after a single dose of INT230-6 of 21.4 mL. More than 95% of the tumor was necrotic (dead) or ghost cells (cells without nucleus). These images show that diffusion distance is proportional to the amount given on a single dose. In panel C we show high necrosis after surgery of a subject with a 3.3 invasive ductal cancer, who received one INT230-6 dose of 13.3 mL. This patient’s tumor was characterized as having sheet-like necrosis to and just beyond the tumor edge.
Figure 18 Panels A and B — Showing the extent of the entire tumor and the area of dead cancer for various doses of drug; greater than 95% of the total tumor volume was killed by a single dose injections of INT230-6.
24
Table of Contents
Figure 18 Panels C and D — 100% necrosis with correspond H&E staining
In the above figure the entire breast tumor has been removed. The black or blue dotted line shows the extent of the tumor, and red dotted line shows the extent of the necrotic (dead cancer) after treatment with INT230-6. For a given tumor diffusion distance and thus tumor killing is proportional to the amount of drug dosed. Both tumors shown with high grade (3) proliferative tumors.
Immune Activation
Intensity presented positive INT230-6 data in patients with early-stage breast cancer in a podium poster spotlight discussion at the 2023 SABCS on December 8, 2023. INT230-6 demonstrated a systemic increase in the median diversity of T-cell repertoire in patients’ blood compared to baseline that was also much larger than a control saline injection and again showed that a single injection of INT230-6 can induce up to >95% necrosis of a tumor. INT230-6 demonstrated an increase in CD4 T-cells and NK cells within tumors and gene expression profiling revealed a treatment effect of up-regulation of immune pathways expressed by T-cell activation, lymphocyte activation and inflammatory responses. INT230-6 demonstrated a favorable safety profile and was well tolerated and patient interest in the new treatment was high. There was a reduced in Ki67 for the drug and control. Live cancer cells are needed to evaluate Ki67. Several subjects’ tumors receiving INT230-6 had such high necrotic percentages that measurement of Ki67 was not possible. Those subject’s samples were therefore noted as unevaluable. This result biased the Ki67 outcome against the drug and indicated that Ki67 was an inappropriate marker for INT230-6.
Enrollment in the study was rapid. We believe patients are highly interested in a product that can potentially destroy the majority of their tumor rapidly while waiting for their surgery and with the possibility to induce a systemic anti-cancer immune response. Surgery proceeded on time or without difficulty by the INT230-6 IT treatment. Adverse events are minimal — mainly transient, low-grade pain at the injection site.
An analysis of differential gene expression comparing pre-and post-treated tumor tissue samples in the control group compared to the drug treated group showed that over 200 more immune related genes were activated pre- and post-treatment compared to the controls.
As shown in Figure 19 below, within the tumor there was a relative increase in abundance of CD4 T naïve (light green) and NK cells post treatment (darker green).
25
Table of Contents
Figure 19 — Relative abundance levels of immune cells present in the breast cancer tumor compared to current standard of care (no treatment controls.
Each bar demonstrates the immune cell abundance in a specific patient separated by cancer subtype, the left panel is the baseline cell population and the right panel is the post INT230-6 treatment.There was a relative increase in abundance of CD4 T naïve (light green) and NK cells (darker green) in the majority of patients post treatment.
In addition, INT230-6 demonstrated a systemic increase in the median diversity of the T-cell repertoire in patients’ blood compared to baseline that was much larger than a control saline injection as seen in Figure 19. The adaptive immune system is one of the body’s most powerful defenses. By being able to adapt, the body’s immune cells can be trained to attack undesirable cells or viruses anywhere in the body. T-cells are an important systemic component of the adaptive immune system that aid in the destruction of invaders. Immune repertoire refers to all the unique T-cell receptor (“TCR”) and B-cell receptor genetic rearrangements. Only lymphocytes that encounter an antigen with the right receptor to bind to it will be activated and proliferate during an immune response, forming a clone of cells with identical antigen receptors for attack. A greater diversity of T-cell repertoire means there is higher likelihood for a T-cell to bind to the foreign entity (e.g. cancer cells) and increase the specific T-cell clonal population to destroy the invader.
Sequencing of the TCR beta chain CDR3 regions from all plasma samples and analyzed TCR repertoire diversity using the Shannon diversity index. TCR diversity was higher post-treatment compared to the pre-treatment. Boxes depict the interquartile range with the line in the boxes showing the median, and the lines outside the boxes show the first or third quartiles of fraction as shown in Figure 20.
Figure 20 — Increase in clonal diversity in blood of all treated patients, with much bigger difference in INT230-6 drug treated vs saline groups
The INVINCIBLE 2 study demonstrated feasibility, safety, tolerability and immune activation of presurgical IT injections in breast cancer patients. Preliminary data show histologic evidence of up to 95% tumor necrosis in varying
26
Table of Contents
biologic subtypes including lobular carcinoma. There was also an increase in immune activation. Both of these study findings support the hypothesis that IT INT230-6 prior to SOC neoadjuvant therapy could increase pCR rates in high-risk patients.
Phase 3 Metastatic Soft Tissue Sarcoma Study (“INVINCIBLE-3 Study”)
In July 2024, we initiated and dosed our first patient in the INVINCIBLE-3 Study, a phase 3 study in 2nd/3rd line treatment for locally advanced, recurrent, inoperable, or metastatic non-diffuse soft tissue sarcoma with overall survival as the primary endpoint in a subset of advanced soft tissue sarcoma patients (leiomyosarcoma, liposarcoma and undifferentiated pleomorphic sarcoma). These subtypes comprise over 80% of the sarcoma populations. This study has been authorized by the FDA, Health Canada, the European Medicines Authority, and Australia's Therapeutics Goods Administration. The trial is enrolling patients and is being conducted in eight countries: the US, Australia, Canada, France, Germany, Italy, Poland, and Spain. Up to 60 sarcoma-focused hospitals and other centers are expected to participate from these countries.
The INVINCIBLE-3 Study will randomize patients 2 to 1 to either INT230-6 for 5 doses Q2 weeks with maintenance dosing every 9 weeks for 2 years or the SOC. The three drugs most used for soft tissue sarcoma will be the control SOC at the investigator’s choice depending on the type of sarcoma. Our Phase 3 study is designed to be 90% powered to detect a difference hazard value of 0.65 in overall survival between the INT230-6 treatment group and the control group with 333 patients enrolled (2:1 randomization to either INT230-6 treatment or control therapy). The study will have 3 interim data reviews. The first at 20% of events (deaths) for futility only, the second at 40% of events, and the third at 60% of events. The final analysis will be based on 80% of events (266 deaths). See Figure 21 below for INVINCIBLE-3 Study schema.
Figure 21 — The INVINCIBLE-3 Study schema comparing INT230-6 to the approved 2nd or 3rd line standard of care drugs
Figure 22 shows the survival curves from five recent Phase 3 studies using now approved SOC drugs for sarcoma, and also shows the expected Phase 3 survival for 1) the blended control based on the likely mix of sarcoma types (green curve) and 2) the INT230-6 survival curve based on the IT-01 Study results for sarcoma patients only (navy blue curve). The references showing the Phase 3 data for the SOC controls are; for trabectadin: Patel S, et. Cancer. 2019 Aug 1;125(15):2610-2620; for eribulin: Schöffski et. al. Lancet. 2016 Apr 16;387(10028):1629-37; and for pazopanib: van der Graaf et. al. Lancet. 2012 May 19;379(9829):1879-86.
It is notable that despite different regimens and sarcoma subtype distributions, the overall survival is consistent for the current SOC drugs. Our IT-01 Study enrolled sarcoma patients with mixed subtypes whose cancer progressed despite a median of 3 prior treatments. We plan to enroll a similar mix of sarcoma patients in the INVINCIBLE-3 Study, however, no patient will have progressed on more than 2 treatments. Thus, patients in the INVINCIBLE-3 Study should be healthier than those treated in our IT-01 Study, where over 25% of patients were well underdosed, and based on the tumor necrosis levels observed.
27
Table of Contents
In the INVINCIBLE-3 Study, underdosing of patients will be less likely, given dosing of INT230-6 can be as high as 175mL from day 1, and patients will also receive long term maintenance treatment of INT230-6 every 12 weeks.
Figure 22 — Overall survival curves of standard of care drugs from phase 3 trials, and INT230-6 survival curve based on IT-01 Study sarcoma patient results.
The survival curves from five recent Phase 3 studies using now approved standard of care drugs for sarcoma. The figure also shows the expected Phase 3 survival for 1) the blended control based on the likely mix of sarcoma types (green curve) and 2) the INT230-6 survival curve based on the IT-01 Study results for sarcoma patients only (navy blue curve), which was conducted in a less healthy sarcoma population.
Phase 2 Pre-surgical (Neoadjuvant) Triple Negative Breast Cancer Study (“INVINCIBLE-4 Study”)
In October 2024, in collaboration with SAKK, we initiated and dosed our first patient in the INVINCIBLE-4 Study, a phase 2 study to treat patients with localized TNBC. The INVINCIBLE-4 Study is a randomized open-label, multicenter study to determine the clinical activity, safety, and tolerability of INT230-6 in patients with tumors greater than two centimeters having early-stage, operable TNBC. These patients undergo SOC treatment, which consists of pembrolizumab, anthracyclines, carboplatin, cyclophosphamide, and paclitaxel. The primary endpoint is pCR in the primary tumor and affected lymph nodes. Patients will be randomized one to one to receive a regimen of two doses of INT230-6 followed by SOC, or SOC alone. The study is expected to enroll 54 patients in up to 16 centers in Switzerland and France.
The FDA instituted its Accelerated Approval Program to allow for earlier approval of drugs that treat serious conditions, and that fill an unmet medical need based on a surrogate endpoint. A surrogate endpoint is a marker, such as a laboratory measurement, radiographic image, physical sign or other measure that is thought to predict clinical benefit but is not itself a measure of clinical benefit. The use of a surrogate endpoint can considerably shorten the time required prior to receiving FDA approval. In November 2020, we met with the FDA to discuss use of our drug prior to surgery for breast cancer patients at high risk of disease recurrence such as those with TNBC for potential accelerated approval. The surrogate endpoint we discussed with the FDA was pCR, defined as the absence of residual invasive and in situ cancer on H&E evaluation of the complete resected breast specimen and all sampled regional lymph nodes following completion of neoadjuvant systemic therapy. pCR is an accepted FDA criteria for triple negative breast cancer for accelerated approval.
28
Table of Contents
Preoperative or neoadjuvant systemic chemotherapy, once reserved for patients with locally advanced breast cancer in whom the goal was to render large breast cancers operable, has become increasingly common. There are several potential reasons to consider neoadjuvant treatment for early-stage breast cancer. Giving chemotherapy preoperatively permits breast conservation in some patients who would otherwise require mastectomy and may improve cosmesis, or the preservation or restoration of physical appearance, in existing candidates for breast conservation. Preoperative therapy also provides a real-time evaluation of tumor response to permit discontinuation of ineffective therapy. Finally, the neoadjuvant setting offers investigators the unique opportunity to examine modulation of tissue, imaging, and other biomarkers from the time of biopsy to the time of definitive breast surgery following preoperative systemic therapy.
On July 26, 2021, the FDA approved pembrolizumab (brand name Keytruda) for high-risk, early-stage, triple-negative breast cancer in combination with chemotherapy as neoadjuvant treatment, and then continued as a single agent as adjuvant treatment after surgery. The efficacy of pembrolizumab in combination with neoadjuvant chemotherapy followed by surgery and continued adjuvant treatment with pembrolizumab as a single agent was investigated in KEYNOTE-522, a randomized, multicenter, double-blind, placebo-controlled trial conducted in patients with newly diagnosed previously untreated high-risk early-stage triple-negative breast cancer. Patients were enrolled regardless of tumor PD-L1 expression. Patients were randomized (2:1) to pembrolizumab in combination with chemotherapy or placebo in combination with chemotherapy. The main efficacy outcome measures were pathological complete response rate and event free survival. The pathological complete response rate was only 63% for patients who received pembrolizumab in combination with chemotherapy compared with 56% for patients who received chemotherapy alone. However, that 7% increase in the pCR for pembrolizumab plus chemotherapy compared to chemotherapy alone was sufficient to result in a meaningful event free survival rate at 3 years for the 1200 patient Keynote 522 population. This in turn resulted in pembrolizumab receiving full approval for neoadjuvant and adjuvant use in triple negative breast cancer. At the same time, in Keynote 522 eighty percent (80%) of patients had a grade 3 or higher adverse event and 0.6% of patients died from the treatment.
As shown in Figure 18 above from the INVINCIBLE 2 Study INT230-6 can cause >95% of a large tumor to become necrotic on a single dose without toxicity other than minor pain at the injection site. Combining one or two doses upfront of INT230-6 with the SOC neoadjuvant therapy (pembrolizumab with anthracycline, cyclophosphamide and taxane) could potentially increase the pCR rate significantly to allow for accelerated approval especially in the more challenging tumors greater than or equal to 2 cm. Further use of INT230-6 may allow for the elimination of the anthracycline or cyclophosphamide and could reduce the toxicity of current chemotherapy regimen while obtaining an increase in pCR. The data on percent tumor necrosis form the phase 2 INVINCIBLE-4 Study will indicate how much necrosis can be induced upfront.
The Phase 2 design of the INVINCIBLE-4 Study is shown in Figure 23 below.
Figure 23 — The INVINCIBLE-4 Study schema comparing INT230-6 to the approved 2nd or 3rd line standard of care drugs
Phase 2 Metastatic Triple Negative Breast Cancer Study (contingent on additional capital raises)
29
Table of Contents
The FDA designation of INT230-6 for Fast Track was made in 2018 as response to our proposed development program evaluating INT230-6 for the treatment of patients with relapsed or metastatic triple negative breast cancer. Metastatic TNBC patients have a poor prognosis, with a median overall survival of 13.3 months with treatment first line. Recently approved treatments including Lynparza (PARP inhibitor) and Tecentriq (PD-L1 inhibitor). Those treatments target a specific subset of patients, with BRCA 1 or 2 and PD-L1 positive markers, respectively. Our target population would be more inclusive. Continuing chemotherapy treatment until disease progression is currently the SOC for patients with metastatic TNBC, with no preferred chemotherapy regimens established at this time. Gilead presented data at the 2021 American Society of Clinical Oncology (ASCO) Annual Meeting (Abstract #1080) for second line use of sacituzumab (Trodelvy). Sacituzumab extended median overall survival to 10.9 months versus 4.9 months with chemotherapy (HR: 0.51; 95% CI: 0.28-0.91). With a small sample size in the IT-01 Study, INT230-6 either as monotherapy or with pembrolizumab has shown in refractory metastatic breast cancer (all types) a median overall survival of 12 months (n=9), and in subset of just m TNBC subjects, a median overall survival of approximately 12.5 months.
INT230-6 Phase 2/3 study design would consist of metastatic TNBC patients whose cancer has progressed following 1 to 2 lines of prior therapy. The Phase 2 study would be approximately 60 patients with INT230-6 arm and a control arm cohort design of patients using investigators choice of therapy. The endpoints would be median overall survival. Patients would receive 5 doses of INT230-6 every two weeks delivered IT with a maintenance dosing. The protocol will be designed to allow us to determine, within 12 months following completion of enrollment, whether INT230-6 has the potential to offer clinical benefit. A combination of INT230-6 with a checkpoint antibody (e.g. pembrolizumab or ipilimumab) within the randomized Phase 2 may be considered. From the results of the ongoing Phase 2, the company would make a strategic decision to use either monotherapy or combination with a checkpoint and size the final study accordingly. Phase 3 would be randomized 2 to 1 against investigators choice of treatment. Additional subjects could be added to the Phase 2 portion to complete the Phase 3 program. A clinical Phase 2/3 program in metastatic breast will be when sufficient capital is available post-initiation of the sarcoma Phase 3 study and the Phase 2/3 program in neoadjuvant breast cancer.
Government Regulation
The FDA and other regulatory authorities at federal, state and local levels, as well as in foreign countries, extensively regulate, among other things, the research, development, testing, manufacture, quality control, import, export, safety, effectiveness, labeling, packaging, storage, distribution, record keeping, approval, advertising, promotion, marketing, post-approval monitoring and post-approval reporting of drugs such as those we are developing. We, along with our vendors, collaboration partners, CROs and contract manufacturers, will be required to navigate the various preclinical, clinical, manufacturing and commercial approval requirements of the governing regulatory agencies of the countries in which we wish to conduct studies or seek approval of our product candidate. The process of obtaining regulatory approvals of drugs and ensuring subsequent compliance with appropriate federal, state, local and foreign statutes and regulations requires the expenditure of substantial time and financial resources.
In the United States, where we are initially focusing our product development, the FDA regulates drugs under the federal Food, Drug, and Cosmetic Act (“FDCA”) and its implementing regulations. Drug products are also subject to other federal, state and local statutes and regulations. Our product candidate is early-stage and has not been approved by the FDA for marketing in the United States.
The process required by the FDA before our product candidate is approved for therapeutic indications and may be marketed in the United States generally involves the following:
•completion of extensive nonclinical studies in accordance with applicable regulations, including studies conducted in accordance with good laboratory practice (“GLP”) requirements;
•submission to the FDA of an IND, which must become effective before clinical trials may begin and must be updated annually or when significant changes are made;
•approval by an institutional review board (“IRB”) or independent ethics committee at each clinical trial site before each trial may be initiated;
•performance of adequate and well-controlled clinical trials in accordance with good clinical practice (“GCP”) requirements and other clinical trial-related regulations to establish the safety and efficacy of the proposed drug product candidate for its intended purpose;
•preparation and submission to the FDA of a NDA after completion of all pivotal trials;
•a determination by the FDA after its receipt of an NDA, to file the application for review;
30
Table of Contents
•satisfactory completion of one or more FDA pre-approval inspections of the manufacturing facility or facilities where the product will be produced to assess compliance with cGMP requirements, to assure that the facilities, methods and controls are adequate to assure the drug product’s identity, strength, quality and purity;
•potential FDA audit of the clinical trial sites that generated the data in support of the NDA to confirm compliance with GCP requirements and data integrity;
•payment of user fees for FDA review of the NDA; and
•FDA review and approval of the NDA, including satisfactory completion of an FDA advisory committee review of the product candidate, if applicable, prior to any commercial marketing or sale of the drug product in the United States.
Preclinical and clinical trials for drug products
Before testing any drug in humans, the product candidate must undergo rigorous preclinical, or nonclinical, testing. Preclinical studies include laboratory evaluations of chemistry, formulation and stability, as well as in vitro and animal studies to assess safety and in some cases to establish the rationale for therapeutic use. The Consolidated Appropriations Act for 2023, signed into law on December 29, 2022, (P.L. 117-328) amended the FDCA to specify that nonclinical testing for drugs may, but is not required to, include in vivo animal testing. According to the amended language, a sponsor may fulfill nonclinical testing requirements by completing various in vitro assays (e.g., cell-based assays, organ chips, or microphysiological systems), in silico studies (i.e., computer modeling), other human or non-human biology-based tests (e.g., bioprinting), or in vivo animal tests. The conduct of preclinical studies is subject to federal and state regulations and requirements, including GLP requirements for safety and toxicology studies as well as the U.S. Department of Agriculture’s Animal Welfare Act, if applicable.
The results of the preclinical studies, together with manufacturing information and analytical data must be submitted to the FDA as part of an IND. An IND is a request for authorization from the FDA to administer an investigational drug product to humans and must become effective before clinical trials may begin. The central focus of an IND submission is on the general investigational plan and the protocol(s) for clinical studies. The IND also includes results of animal and in vitro studies assessing the toxicology, pharmacokinetics, pharmacology, and pharmacodynamic characteristics of the product; chemistry, manufacturing, and controls information; and any available human data or literature to support the use of the investigational product. The IND automatically becomes effective 30 days after receipt by the FDA, unless the agency, within the 30-day time period, raises concerns or questions about one or more proposed clinical trials, including concerns that human research subjects will be exposed to unreasonable health risks, and imposes a clinical hold. In such a case, the IND sponsor and the FDA must resolve any outstanding concerns before the clinical trial can begin. Accordingly, submission of an IND may or may not result in FDA authorization to begin a trial. Some long-term nonclinical testing may continue after the IND is submitted. A separate submission to an existing IND must also be made for each successive clinical trial conducted during development of a product candidate, and the FDA must grant permission, either explicitly or implicitly by not objecting, before each clinical trial can begin.
The clinical-stage of development involves the administration of the product candidate to healthy volunteers or patients under the supervision of qualified investigators, generally physicians not employed by or under the trial sponsor’s control, in accordance with GCP requirements, which include the requirements that all research subjects provide their informed consent for their participation in any clinical trial. For cancer patients, the Phase 1 usually involves patients whose cancer has progressed following all approved therapies for that particular cancer.
Clinical trials are conducted under protocols detailing, among other things, the objectives of the clinical trial, dosing procedures, subject selection and exclusion criteria and the parameters and criteria to be used in monitoring safety and evaluating effectiveness. Each protocol, and any subsequent amendments to the protocol, must be submitted to the FDA as part of the IND. Furthermore, each clinical trial must be reviewed and approved by an IRB for each institution at which the clinical trial will be conducted to ensure that the risks to individuals participating in the clinical trials are minimized and are reasonable in relation to the anticipated benefits. The IRB also approves the informed consent form that must be provided to each clinical trial subject or his or her legal representative, and must monitor the clinical trial until completed. The FDA, the IRB, or the sponsor may suspend or discontinue a clinical trial at any time on various grounds, including a finding that the subjects are being exposed to an unacceptable health risk. Some clinical trials also include oversight by an independent group of qualified experts organized by the trial sponsor, known as a data safety monitoring board, which provides authorization for whether or not a study may move forward at designated check points based on access to certain data from the study and may recommend that the sponsor halt the clinical trial if the data safety monitoring board determines that there is an unacceptable safety risk for subjects or other grounds, such as no demonstration of efficacy.
31
Table of Contents
There also are requirements governing the reporting of certain ongoing clinical trials and completed clinical trials to public registries. Information about applicable clinical trials, including trial results, must be submitted to the NIH within specific timeframes for publication on the ClinicalTrials.gov data registry. Sponsors of clinical trials registered with NIH are obligated to disclose the results of such trials, but such disclosure can be delayed in some cases for up to two years after the date of completion of the trial. Failure to timely register a covered clinical trial or to submit trial results as provided for in the law can give rise to civil monetary penalties and also prevent the non-compliant party from receiving future grant funds from the federal government. The U.S. Department of Health and Human Services’ final rule and NIH’s complementary policy on ClinicalTrials.gov registration and reporting requirements became effective in 2017, and the government has brought enforcement actions against clinical trial sponsors that fail to comply with such requirements.
We have conducted our trials in Canada under a clinical trial authorization from Health Canada, the regulatory authority in Canada. While we plan to conduct any international clinical trials we sponsor under appropriate country filings in the future, a sponsor who wishes to conduct a clinical trial outside of the United States may, but need not, obtain FDA authorization to conduct the clinical trial under an IND. The FDA will accept as support for an IND or application for marketing approval a well-designed and well-conducted foreign clinical study not conducted under an IND if the study was conducted in accordance with GCP requirements, and the FDA is able to validate the data through an onsite inspection if deemed necessary.
Clinical trials to evaluate therapeutic indications to support NDAs for marketing approval are typically conducted in three sequential phases, which may overlap.
•Phase 1 — The investigational product is introduced into healthy human volunteers or patients with the target disease or condition. These studies are typically designed to test the safety, dosage tolerance, absorption, metabolism, distribution and excretion of the investigational product in humans, evaluate the side effects associated with increasing doses, and, if possible, to gain early evidence of effectiveness. As noted above for new cancer treatments such as ours, or other severe or life-threatening diseases, especially where the product may be too inherently toxic to ethically administer to healthy volunteers, initial human testing is often conducted with patients.
•Phase 2 — This phase typically involve administration of the investigational product to a limited patient population with a specified disease or condition to identify possible adverse side effects and safety risks, preliminarily evaluate the efficacy, and to determine dosage tolerance, optimal dosages and dosing schedule. Multiple Phase 2 clinical trials may be conducted to obtain information prior to beginning larger and more expensive Phase 3 clinical trials.
•Phase 3 — These clinical trials typically involve administration of the investigational product to an expanded patient population, generally at multiple geographically dispersed trial sites, to further evaluate dosage, clinical efficacy and safety. Such trials are intended to establish the overall risk/benefit ratio of the investigational product and to provide, if appropriate, an adequate basis for product approval and labeling. Generally, two adequate and well-controlled Phase 3 clinical trials, or in certain cases one large multicenter trial with robust results, are required by the FDA to support approval of an NDA.
Post-approval trials, sometimes referred to as Phase 4 clinical trials, may be conducted after initial marketing approval. These trials are used to gain additional experience from the treatment of patients in the intended therapeutic indication and are commonly intended to generate additional safety data regarding use of the product in a clinical setting. In certain instances, the FDA may mandate the performance of Phase 4 clinical trials as a condition of approval of an NDA.
A pivotal trial is a clinical trial that is believed to satisfy FDA requirements for the evaluation of a product candidate’s safety and efficacy such that it can be used, alone or with other pivotal or non-pivotal trials, to support regulatory approval. Generally, pivotal trials are Phase 3 trials, but they may be Phase 2 trials if the design provides a well-controlled and reliable assessment of clinical benefit, particularly in an area of unmet medical need. Congress also recently amended the FDCA, as part of the Consolidated Appropriations Act for 2023, in order to require sponsors of a Phase 3 clinical trial, or other “pivotal study” of a new drug to support marketing authorization, to design and submit a diversity action plan for such clinical trial. The action plan must include the sponsor’s diversity goals for enrollment, as well as a rationale for the goals and a description of how the sponsor will meet them. Sponsors must submit a diversity action plan to the FDA by the time the sponsor submits the relevant clinical trial protocol to the agency for review. The FDA may grant a waiver for some or all of the requirements for a diversity action plan. It is unknown at this time how the diversity action plan may affect Phase 3 trial planning and timing, but if the FDA objects to a sponsor’s diversity action plan or otherwise requires significant changes to be made, it could delay initiation of the relevant clinical trial.
Progress reports detailing the results of the clinical trials, among other information, must be submitted at least annually to the FDA and written IND safety reports must be submitted to the FDA and the investigators 15 days after the
32
Table of Contents
trial sponsor determines the information qualifies for reporting for serious and unexpected suspected adverse events, findings from other studies or animal or in vitro testing that suggest a significant risk for human participants exposed to the investigational product and any clinically important increase in the rate of a serious suspected adverse reaction over that listed in the protocol or investigator brochure. The sponsor must also notify the FDA of any unexpected fatal or life-threatening suspected adverse reaction as soon as possible but in no case later than seven calendar days after the sponsor’s initial receipt of the information.
Concurrent with clinical trials, companies usually complete additional nonclinical studies and must also develop additional information about the drug characteristics of the product candidate and finalize a process for manufacturing the drug product in commercial quantities in accordance with cGMP requirements. The manufacturing process must be capable of consistently producing quality batches of the product candidate and manufacturers must develop, among other things, methods for testing the identity, strength, quality and purity of the final drug product. Additionally, appropriate packaging must be selected and tested, and stability studies must be conducted to demonstrate that the product candidate does not undergo unacceptable deterioration over its shelf life and to identify appropriate storage conditions for the product candidate.
NDA Submission and Review by the FDA
Assuming successful completion of all required clinical testing in accordance with applicable regulatory requirements, detailed information on the product candidate’s is submitted to the FDA as part of an NDA requesting approval to market the product for one or more indications. The NDA must include all relevant data available from pertinent pre-clinical and clinical studies, including negative or ambiguous results as well as positive findings, together with detailed information relating to the product’s chemistry, manufacturing, controls, and proposed labeling, among other things. Data may come from company-sponsored clinical trials intended to test the safety and efficacy of a product’s use or from a number of alternative sources, including studies initiated by investigators. To support marketing approval, the data submitted must be sufficient in quality and quantity to establish the safety and efficacy of the investigational product to the satisfaction of the FDA. FDA approval of an NDA must be obtained before a drug product may be marketed in the United States.
In addition, under the Pediatric Research Equity Act (“PREA”), an NDA or supplement to an NDA, for a new active ingredient, indication, dosage form, dosage regimen, or route of administration must contain data that are adequate to assess the safety and effectiveness of the drug product candidate for the claimed indications in all relevant pediatric subpopulations and to support dosing and administration for each pediatric subpopulation for which the product is safe and effective. A sponsor who is planning to submit a marketing application for a drug product that includes a new clinically active component, new indication, new dosage form, new dosing regimen or new route of administration must submit an initial Pediatric Study Plan (“PSP”) within sixty days after an end-of-Phase 2 meeting or, if there is no such meeting, as early as practicable before the initiation of the pivotal clinical trial. The initial PSP must include an outline of the pediatric study or studies that the sponsor plans to conduct, including trial objectives and design, age groups, relevant endpoints and statistical approach, or a justification for not including such detailed information, and any request for a deferral of pediatric assessments or a full or partial waiver of the requirement to provide data from pediatric studies along with supporting information. The FDA and the sponsor must reach an agreement on the PSP. A sponsor can submit amendments to an agreed upon initial PSP at any time if changes to the pediatric plan need to be considered based on data collected from pre-clinical studies, early phase clinical trials or other clinical development programs. The FDA may, on its own initiative or at the sponsor’s request, grant deferrals for submission of some or all pediatric data until after approval of the product for use in adult populations, or full or partial waivers from the pediatric data requirements. Unless otherwise required by regulation, PREA does not apply to any drug product for an indication for which orphan designation has been granted.
The FDA reviews all submitted NDAs to ensure that they are sufficiently complete for substantive review before it accepts them for filing, and may request additional information rather than accepting the NDA for filing. The FDA must make a decision on accepting an NDA for filing within 60 days of receipt, and such decision could include a refusal to file by the FDA. If the FDA refuses to file the NDA and requests additional information, the application must be resubmitted with the requested information. The resubmitted application also is subject to review before the FDA accepts it for filing. Once the submission is accepted for filing, the FDA begins an in-depth substantive review of the NDA. The FDA reviews an NDA to determine, among other things, whether the product is safe and effective for the proposed indication and whether the facility in which it is manufactured, processed, packaged or held meets standards designed to assure the product’s continued identity, strength, quality and purity. Under the goals and polices agreed to by the FDA under the Prescription Drug User Fee Act (“PDUFA”), the FDA targets ten months, from the filing date, in which to complete its initial review of an original NDA and respond to the applicant, and six months from the filing date of an original NDA is granted priority review. The FDA does not always meet its PDUFA goal dates for standard or priority NDAs, and the
33
Table of Contents
review process is often extended by FDA requests for additional information or clarification and the sponsor’s process to respond to such inquiries. As a result, the NDA review process can be quite lengthy.
Further, under PDUFA, as amended, each NDA must be accompanied by a substantial user fee, and the sponsor of an approved NDA is also subject to an annual program fee for each approved drug product. The FDA adjusts the PDUFA user fees on an annual basis. Fee waivers or reductions may be available in certain circumstances, including a waiver of the application fee for the first application filed by a small business. Additionally, no application user fees are assessed on NDAs for products designated as orphan drugs, unless the product also includes a non-orphan indication.
During its review of an NDA, the FDA may refer an application for a new drug product to an advisory committee. An advisory committee is a panel of independent experts, including clinicians and other scientific experts, which reviews, evaluates and provides a recommendation as to whether the application should be approved and under what conditions. The FDA is not bound by the recommendations of an advisory committee, but it considers such recommendations carefully when making decisions.
Before approving an NDA, the FDA typically will inspect the facility or facilities where the product is manufactured. The FDA will not approve an application unless it determines that the manufacturing processes and facilities are in compliance with cGMP requirements and adequate to assure consistent production of the product within required specifications. Additionally, before approving an NDA, the FDA may inspect one or more clinical trial sites to assure compliance with GCP and other requirements and the integrity of the clinical data submitted to the FDA.
The FDA also may require submission of a Risk Evaluation and Mitigation Strategy (“REMS”) as a condition for approving the NDA to ensure that the benefits of the product outweigh its risks. The REMS could include medication guides, physician communication plans, assessment plans, and/or elements to assure safe use, such as restricted distribution methods, patient registries, or other risk-minimization tools. The FDA determines the requirement for a REMS, as well as the specific REMS provisions, on a case-by-case basis. If the FDA concludes a REMS plan is needed, the sponsor of the NDA must submit a proposed REMS plan. The FDA will not approve an NDA without a REMS plan, if required.
After evaluating the NDA and all related information, including the advisory committee recommendation, if any, and inspection reports regarding the manufacturing facilities and clinical trial sites, the FDA will issue either an approval letter or a Complete Response Letter (“CRL”). A CRL indicates that the review cycle of the application is complete and the application will not be approved in its present form. A CRL will usually describe all of the deficiencies that the FDA has identified in the NDA. The deficiencies identified may be minor, for example, requiring labeling changes, or major, for example, requiring additional clinical trials. In issuing the CRL, the FDA may recommend actions that the applicant might take to place the NDA in condition for approval, including requests for additional information or clarification. If a CRL is issued, the applicant may either resubmit the NDA, addressing all of the deficiencies identified in the letter, or withdraw the application. However, even with submission of the additional information, the FDA ultimately may decide that the application does not satisfy the regulatory criteria for approval. If and when those conditions have been met to the FDA’s satisfaction, the FDA will typically issue an approval letter. An approval letter authorizes commercial marketing of the product with specific prescribing information for specific indications.
Even if the FDA approves a drug product, depending on the specific risk(s) to be addressed, the FDA may limit the approved indications for use of the product, require that contraindications, warnings or precautions be included in the product labeling, require that post-approval studies, including Phase 4 clinical trials, be conducted to further assess a product’s safety after approval, require testing and surveillance programs to monitor the product after commercialization, or impose other conditions, including distribution and use restrictions or other risk management mechanisms under a REMS, any of which can materially affect the potential market and profitability of the product. The FDA may prevent or limit further marketing of a product based on the results of post-marketing studies or surveillance programs. After approval, some types of changes to the approved product, such as adding new indications, manufacturing changes, and additional labeling claims, are subject to further testing requirements and FDA review and approval.
Fast Track, Breakthrough Therapy and Priority Review
The FDA maintains several programs designed to facilitate and expedite development and review of certain new drugs that are intended for the treatment of serious or life-threatening diseases or conditions and that demonstrate the potential to address unmet medical needs or represent a significant improvement over existing therapies. These programs include fast track designation, breakthrough therapy designation, and priority review.
A new drug product is eligible for fast track designation if it is intended to treat a serious or life-threatening disease or condition and demonstrates the potential to address an unmet medical need by providing a therapy where none exists or a therapy that may be superior to existing therapies based on efficacy or safety factors. Fast Track Designation provides increased opportunities for more frequent sponsor interactions with the FDA during product development to help facilitate
34
Table of Contents
and expedite the development and review process. In addition, the FDA may initiate a rolling review once a marketing application is filed, meaning that the agency may consider for review sections of the NDA on a rolling basis before the complete application is submitted, if the sponsor provides a schedule for the submission of the sections of the NDA, the FDA agrees to accept sections of the NDA and determines that the schedule is acceptable, and the sponsor pays any required user fees upon submission of the first section of the NDA.
In addition, a new drug product may be eligible for breakthrough therapy designation if it is intended to treat a serious or life-threatening disease or condition and preliminary clinical evidence indicates that the drug, alone or in combination with one or more other drugs or biologics, may demonstrate substantial improvement over existing therapies on one or more clinically significant endpoints, such as substantial treatment effects observed early in clinical development. Breakthrough therapy designation provides all the features of fast track designation in addition to intensive guidance on an efficient development program beginning as early as Phase 1, and FDA organizational commitment to expedited development, including involvement of senior managers and experienced review staff in a cross-disciplinary review, where appropriate.
Finally, the FDA may grant priority review to a product candidate intended to treat a serious or life-threatening disease or condition, and if approved, would provide a significant improvement in safety or effectiveness over existing therapies. The FDA determines at the time that the NDA is submitted, on a case-by-case basis, whether the proposed drug product represents a significant improvement in treatment, prevention or diagnosis of disease when compared with other available therapies. Significant improvement may be illustrated by evidence of increased effectiveness in the treatment of a condition, elimination or substantial reduction of a treatment-limiting reaction, documented enhancement of patient compliance that may lead to improvement in serious outcomes, or evidence of safety and effectiveness in a new subpopulation. A priority review designation is intended to direct overall attention and resources to the evaluation of such applications, and to shorten the FDA’s goal for taking action on a NDA from ten months to six months for an original application from the date of filing.
Even if a product qualifies for one or more of these programs, the FDA may later decide that the product no longer meets the conditions for qualification or decided that the time period for FDA review or approval will not be shortened. Furthermore, fast track designation, breakthrough therapy designation and priority review do not change the scientific or medical standards for approval or the quality of evidence necessary to support approval and may not ultimately expedite the development or review process.
Accelerated Approval
In addition, products studied for their safety and effectiveness in treating serious or life-threatening illnesses and that provide meaningful therapeutic benefit over existing treatments may receive accelerated approval from the FDA and may be approved on the basis of adequate and well-controlled clinical trials establishing that the drug product has an effect on a surrogate endpoint that is reasonably likely to predict clinical benefit. The FDA may also grant accelerated approval for such a drug or biologic when the product has an effect on an intermediate clinical endpoint that can be measured earlier than an effect on irreversible morbidity or mortality (“IMM”), and that is reasonably likely to predict an effect on IMM or other clinical benefit, taking into account the severity, rarity, or prevalence of the condition and the availability or lack of alternative treatments. As a condition of approval, the FDA will require that a sponsor of a drug receiving accelerated approval perform post-marketing clinical trials to verify and describe the predicted effect on IMM or other clinical endpoint, and the product may be subject to expedited withdrawal procedures. Drugs and biologics granted accelerated approval must meet the same statutory standards for safety and effectiveness as those granted traditional approval.
For the purposes of accelerated approval, a surrogate endpoint is a marker, such as a laboratory measurement, radiographic image, physical sign, or other measure that is thought to predict clinical benefit, but is not itself a measure of clinical benefit. Surrogate endpoints can often be measured more easily or more rapidly than clinical endpoints. An intermediate clinical endpoint is a measurement of a therapeutic effect that is considered reasonably likely to predict the clinical benefit of a drug or biologic, such as an effect on IMM. The FDA has limited experience with accelerated approvals based on intermediate clinical endpoints, but has indicated that such endpoints generally may support accelerated approval when the therapeutic effect measured by the endpoint is not itself a clinical benefit and basis for traditional approval, if there is a basis for concluding that the therapeutic effect is reasonably likely to predict the ultimate long-term clinical benefit of a drug or biologic.
The accelerated approval pathway is most often used in settings in which the course of a disease is long and an extended period of time is required to measure the intended clinical benefit of a drug or biologic, even if the effect on the surrogate or intermediate clinical endpoint occurs rapidly. For example, accelerated approval has been used extensively in the development and approval of drugs and biologics for treatment of a variety of cancers in which the goal of therapy is
35
Table of Contents
generally to improve survival or decrease morbidity and the duration of the typical disease course requires lengthy and sometimes large clinical trials to demonstrate a clinical or survival benefit.
The accelerated approval pathway is usually contingent on a sponsor’s agreement to conduct, in a diligent manner, additional post-approval confirmatory studies to verify and describe the drug’s clinical benefit. As a result, a product candidate approved on this basis is subject to rigorous post-marketing compliance requirements, including the completion of Phase 4 or post-approval clinical trials to establish the effect on the clinical endpoint. Failure to conduct required post-approval studies, or to confirm the predicted clinical benefit of the product during post-marketing studies, would allow the FDA to withdraw approval of the drug. Congress recently provided FDA with additional statutory authority to mitigate potential risks to patients from continued marketing of ineffective drugs previously granted accelerated approval. Under the act’s amendments to the FDCA, FDA may require the sponsor of a product granted accelerated approval to have a confirmatory trial underway prior to approval. The sponsor must also submit progress reports on a confirmatory trial every six months until the trial is complete, and such reports are published on FDA’s website. The amendments also give FDA the option of using expedited procedures to withdraw product approval if the sponsor’s confirmatory trial fails to verify the claimed clinical benefits of the product.
All promotional materials for product candidates being considered and approved under the accelerated approval program are subject to prior review by the FDA.
U.S. Post-Approval Requirements for Drugs
Drugs manufactured or distributed pursuant to the FDA approvals are subject to pervasive and continuing regulation by the FDA, including, among other things, requirements relating to recordkeeping, periodic reporting, product sampling and distribution, reporting of adverse experiences with the product, complying with promotion and advertising requirements, which include restrictions on promoting products for unapproved uses or patient populations (known as “off-label use”) and limitations on industry-sponsored scientific and educational activities. Although physicians may prescribe approved products for off-label uses, manufacturers may not market or promote such uses. The FDA and other agencies actively enforce the laws and regulations prohibiting the promotion of off-label uses, including not only by a manufacturer’s employees but also by its agents or those speaking on its behalf, and a company that is found to have improperly promoted off-label uses may be subject to significant liability. Failure to comply with these requirements can result in, among other things, adverse publicity, warning letters, corrective advertising and potential civil and criminal penalties, including liabilities under the False Claims Act where products carry reimbursement under federal health care programs. Promotional materials for approved drugs must be submitted to the FDA in conjunction with their first use or first publication. Further, if there are any modifications to the product, including changes in indications, labeling or manufacturing processes or facilities, the applicant may be required to submit and obtain FDA approval of a new NDA or NDA supplement, which may require the development of additional data or preclinical studies and clinical trials.
The FDA may impose a number of post-approval requirements as a condition of approval of an NDA. For example, the FDA may require post-market testing, including Phase 4 clinical trials, and surveillance to further assess and monitor the product’s safety and effectiveness after commercialization. FDA may also condition approval of a drug product on the development and approval of a REMS. A REMS could include medication guides, physician communication plans or elements to assure safe use, such as restricted distribution methods, patient registries and other risk minimization tools. Any of these limitations on approval or marketing could restrict the commercial promotion, distribution, prescription or dispensing of products. Product approvals may be withdrawn for non-compliance with regulatory standards or if problems occur following initial marketing.
In addition, drug manufacturers and their subcontractors involved in the manufacture of approved products are required to register their establishments with the FDA and certain state agencies and are subject to periodic scheduled or unannounced inspections by the FDA and certain state agencies for compliance with ongoing regulatory requirements, including cGMP regulations, which impose certain procedural and documentation requirements upon us and our contract manufacturers. Changes to the manufacturing process are strictly regulated, and, depending on the significance of the change, may require prior FDA approval before being implemented. FDA regulations also require investigation and correction of any deviations from cGMP requirements and impose reporting requirements upon us and any third-party manufacturers that we may decide to use. Accordingly, manufacturers must continue to expend time, money and effort in the area of production and quality control to maintain compliance with cGMP and other aspects of regulatory compliance. Failure to comply with statutory and regulatory requirements can subject a manufacturer to possible legal or regulatory action, such as warning letters, suspension of manufacturing, product seizures, injunctions, civil penalties or criminal prosecution. There is also a continuing, annual program fee for any marketed product.
Once a drug product is granted marketing approval, the FDA may withdraw the approval if compliance with regulatory requirements and standards is not maintained or if problems occur after the product reaches the market. Later
36
Table of Contents
discovery of previously unknown problems with a product, including adverse events of unanticipated severity or frequency, or with manufacturing processes, or failure to comply with regulatory requirements, may result in revisions to the approved labeling to add new safety information, requirements for post-market studies or clinical trials to assess new safety risks, or imposition of distribution or other restrictions under a REMS. Other potential consequences include, among other things:
•restrictions on the marketing or manufacturing of the product, complete withdrawal of the product from the market or product recalls;
•safety alerts, Dear Healthcare Provider letters, press releases or other communications containing warnings or other safety information about the product;
•mandated modification of promotional materials and labeling and issuance of corrective information;
•fines, warning letters, or untitled letters;
•holds on clinical trials;
•refusal of the FDA to approve applications or supplements to approved applications, or suspension or revocation of product approvals;
•product seizure or detention, or refusal to permit the import or export of products;
•injunctions or the imposition of civil or criminal penalties; and
•consent decrees, corporate integrity agreements, debarment or exclusion from federal healthcare programs.
In addition, the distribution of prescription pharmaceutical products is subject to the Prescription Drug Marketing Act, or PDMA, which regulates the distribution of drugs and drug samples at the federal level, and sets minimum standards for the registration and regulation of drug distributors by the states. Both the PDMA and state laws limit the distribution of prescription pharmaceutical product samples and impose requirements to ensure accountability in distribution. The Drug Supply Chain Security Act, or DSCSA, was enacted with the aim of building an electronic system to identify and trace certain prescription drugs distributed in the United States, including most biological products. The DSCSA mandates phased-in and resource-intensive obligations for pharmaceutical manufacturers, wholesale distributors and dispensers over a ten‐year period, which culminated in November 2023. After an additional one-year stabilization period to give entities subject to the DSCSA additional time to finalize interoperable tracking systems and to ensure supply chain continuity, the applicable requirements under the DSCSA became fully enforceable as of November 27, 2024. From time to time, new legislation and regulations may be implemented that could significantly change the statutory provisions governing the approval, manufacturing and marketing of products regulated by the FDA. For example, FDA released proposed regulations in February 2022 to amend the national standards for licensing of wholesale drug distributors by the states; establish new minimum standards for state licensing third-party logistics providers; and create a federal system for licensure for use in the absence of a state program, each of which is mandated by the DSCSA. It is impossible to predict whether further legislative or regulatory changes will be enacted, or FDA regulations, guidance or interpretations changed or what the impact of such changes, if any, may be.
Orphan Designation and Exclusivity
Under the Orphan Drug Act, the FDA may grant orphan drug designation (“ODD”) to a drug intended to treat a rare disease or condition, defined as a disease or condition with either a patient population of fewer than 200,000 individuals in the United States, or a patient population greater of than 200,000 individuals in the United States when there is no reasonable expectation that the cost of developing and making available the drug in the United States will be recovered from sales in the United States of that drug or biologic. ODD must be requested before submitting an NDA. After the FDA grants ODD, the generic identity of the therapeutic agent and its potential orphan use are disclosed publicly by the FDA.
If a product that has received ODD and subsequently receives the first FDA approval for a particular clinically active component for the disease for which it has such designation, the product is entitled to orphan product exclusivity, which means that the FDA may not approve any other applications, including a full NDA, to market the same biologic for the same indication for seven years from the approval of the NDA, except in limited circumstances, such as a showing of clinical superiority to the product with orphan drug exclusivity or if the FDA finds that the holder of the orphan drug exclusivity has not shown that it can assure the availability of sufficient quantities of the orphan drug to meet the needs of patients with the disease or condition for which the drug was designated. Orphan drug exclusivity does not prevent the FDA from approving a different drug or biologic for the same disease or condition, or the same drug or biologic for a different disease or condition. Among the other benefits of ODD are tax credits for certain research and a waiver of the NDA application user fee.
37
Table of Contents
A designated orphan drug may not receive orphan drug exclusivity if it is approved for a use that is broader than the indication for which it received ODD. In addition, orphan drug exclusive marketing rights in the United States may be lost if the FDA later determines that the request for designation was materially defective or if the manufacturer is unable to assure sufficient quantities of the product to meet the needs of patients with the rare disease or condition.
We filed for orphan drug status with the FDA in December 2021, responded to clarifications from the FDA in March 2022, and received orphan drug designation for all three components of INT230-6—SHAO, cisplatin and vinblastine—for soft tissue sarcoma in June 2022. This designation makes INT230-6 eligible for seven years of marketing exclusivity if it receives marketing approval for the treatment of soft tissue sarcoma.
A drug product can also obtain pediatric market exclusivity in the United States. Pediatric exclusivity, if granted, adds six months of marketing protection to the term of any existing regulatory exclusivity periods or listed patents. This six-month exclusivity, which runs from the end of other exclusivity protection or patent term, may be granted if any NDA sponsor submits pediatric data that fairly responds to a Written Request from the FDA for such data. The data do not need to show the product to be effective in the pediatric population studied; rather, if the clinical trial is deemed to fairly respond to the FDA’s request, the additional protection is granted. Although this is not a patent term extension, it effectively extends the regulatory period during which the FDA cannot approve another application. The issuance of a Written Request by the FDA does not require the sponsor to undertake the described studies.
The Hatch-Waxman Act and Marketing Exclusivity
Under the Drug Price Competition and Patent Term Restoration Act of 1984, otherwise known as the Hatch-Waxman Act, Congress authorized the FDA to approve generic drugs based on innovator or “reference” drugs previously approved by the FDA. Congress also enacted Section 505(b)(2) of the FDCA, which provides a hybrid drug approval pathway combining features of a traditional NDA and a generic drug application.