Table of Contents

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2020

For the transition period from to

Commission file number 1-13397

INGREDION INCORPORATED

(Exact name of registrant as specified in its charter)

Identification No.)

5 Westbrook Corporate Center, Westchester, Illinois 60154

(Address of principal executive offices) (Zip Code)

Registrant’s telephone number, including area code (708) 551-2600

Securities registered pursuant to Section 12(b) of the Act:

Common Stock, par value $0.01 per share INGR New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes☒ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐No☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☒ Accelerated filer ☐

Non-accelerated filer ☐ Smaller reporting company ☐Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C.7262(b)) by the registered public accounting firm that prepared or issued its audit report Yes ☒ No ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the registrant's voting stock held by non-affiliates of the registrant (based upon the per share closing price of $83.00 on the New York Stock Exchange on June 30, 2020, and, for the purpose of this calculation only, the assumption that all of the registrant's directors and executive officers are affiliates) was approximately $5,551,000,000.

The number of shares outstanding of the registrant's common stock, par value $0.01 per share, as of February 19, 2021, was 67,110,523.

Documents Incorporated by Reference:

Information required by Part III (Items 10, 11, 12, 13 and 14) of this document is incorporated by reference to certain portions of the registrant’s definitive Proxy Statement to be distributed in connection with its 2021 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after December 31, 2020.

Table of Contents

INGREDION INCORPORATED

FORM 10-K

TABLE OF CONTENTS

Page

Part I

Item 1. Business 3

Item 1A. Risk Factors 17

Item 1B. Unresolved Staff Comments 25

Item 2. Properties 26

Item 3. Legal Proceedings 27

Item 4. Mine Safety Disclosures 27

Part II

Item 6. Selected Financial Data 29

Item 7A. Quantitative and Qualitative Disclosures About Market Risk 55

Item 8. Financial Statements and Supplementary Data 57

Item 9A. Controls and Procedures 101

Item 9B. Other Information 106

Part III

Item 10. Directors, Executive Officers and Corporate Governance 106

Item 11. Executive Compensation 106

Item 14. Principal Accounting Fees and Services 106

Part IV

Item 15. Exhibit and Financial Statement Schedules 107

Table of Contents

For purposes of this report, unless the context otherwise requires, all references herein to the “Company,” “Ingredion,” “we,” “us,” and “our” shall mean Ingredion Incorporated and its consolidated subsidiaries.

PART I.

ITEM 1. BUSINESS

Our Company

Ingredion Incorporated (“Ingredion”) is a leading global ingredients solutions provider. We turn corn, tapioca, potatoes, plant-based stevia, grains, fruits, and vegetables into value-added ingredients and biomaterials for the food, beverage, brewing and other industries. Ingredion’s common stock is traded on the New York Stock Exchange under the ticker symbol “INGR.”

We are principally engaged in the production and sale of starches and sweeteners for a wide range of industries, and are managed geographically on a regional basis. Our operations are classified into four reportable business segments: North America, South America, Asia-Pacific and Europe, Middle East, and Africa (“EMEA”). Our North America segment includes businesses in the U.S., Mexico, and Canada. Our South America segment includes businesses in Brazil, the Southern Cone of South America (which includes Argentina, Peru, Chile, and Uruguay), Colombia, and Ecuador. Our Asia-Pacific segment includes businesses in South Korea, Thailand, China, Australia, Japan, New Zealand, Indonesia, Singapore, the Philippines, Malaysia, India, and Vietnam. Our EMEA segment includes businesses in Pakistan, Germany, the United Kingdom and South Africa.

We supply a broad range of customers in many diverse industries around the world, including the food, beverage, brewing and other industries, as well as the global animal feed markets.

Our product lines include starches and sweeteners, animal feed products and edible corn oil. Our starch-based products include both food-grade and industrial starches, and biomaterials. Our sweetener products include glucose syrups, high maltose syrups, high fructose corn syrup, caramel color, dextrose, polyols, maltodextrins, and glucose and syrup solids. Our products are derived primarily from the processing of corn and other starch-based materials, such as tapioca, potato, and rice.

We continue to expand our product portfolio through capital investments and acquisitions. We are making investments through our plant-based protein product lines, including pulse-based concentrates, flours and isolates. Capital investment commitments for 2021 are anticipated to be between $330 million and $350 million.

On July 1, 2020, we completed our acquisition of 75% ownership of PureCircle Limited (“PureCircle”), the remaining 25% of which is owned by former PureCircle shareholders. PureCircle is one of the leading producers and innovators of plant-based stevia sweeteners and flavors for the food and beverage industry. The acquisition brought global innovation and manufacturing expertise, which we are leveraging with our global go-to-market model, formulation capabilities and broad ingredient portfolio. PureCircle is consolidated by Ingredion for financial reporting purposes.

On November 3, 2020, we acquired the remaining 80% of the outstanding shares of Verdient Foods, Inc (“Verdient”). We had previously acquired a 20% equity method investment in Verdient in 2018. Verdient is a Canada-based producer of pulse-based protein concentrates and flours from peas, lentils, and fava beans for human food applications.

Our manufacturing process is based on a capital-intensive, two-step process that involves the wet-milling and processing of starch-based materials, primarily corn. During the front-end process, the starch-based materials are steeped in a water-based solution and separated into starch and co-products such as animal feed and corn oil. The starch is then either dried for sale or further processed to make starches, sweeteners and other ingredients that serve the particular needs of various industries.

Table of Contents

We believe our approach to production and service, which focuses on local management and production improvements of our worldwide operations, provides us with a unique understanding of the cultures and product requirements in each of the geographic markets in which we operate, bringing added value to our customers through innovative solutions. At the same time, we believe that our corporate functions allow us to identify synergies and maximize the benefits of our global presence.

Geographic Scope and Operations

Our North America segment consists of operations in the U.S., Mexico, and Canada. The region’s facilities include 22 manufacturing facilities producing a wide range of starches, sweeteners, gum acacia, peas, and fruit and vegetable concentrates. We have focused our recent investment on expanding plant-based protein product lines, including pulse-based concentrates, flours and isolates.

Our South America segment includes operations in Brazil, Colombia, the Southern Cone of South America, Peru, and Ecuador. The segment includes nine manufacturing facilities that produce regular, modified, waxy, and tapioca starches, high fructose and high maltose syrups and syrup solids, dextrins and maltodextrins, dextrose, specialty starches, caramel color, sorbitol, and vegetable adhesives.

Our Asia-Pacific segment manufactures corn-based products in South Korea, China, and Thailand. We also manufacture tapioca-based and rice-based products in Thailand and plant-based stevia sweetener products in Malaysia and China. We supply tapioca, rice and plant-based stevia sweetener products not only to our Asia-Pacific segment, but the rest of our global network. The region’s facilities include ten manufacturing facilities that produce modified, specialty, regular, waxy, tapioca and rice starches, dextrins, glucose, high maltose syrup, plant-based stevia sweeteners and flour, dextrose, high fructose corn syrup, and caramel color.

Our EMEA segment includes five manufacturing facilities that produce modified and specialty starches, glucose and dextrose in Pakistan, Germany, and the United Kingdom.

Additionally, we utilize a network of tolling manufacturers in various regions in the production cycle of certain specialty starches. In general, these tolling manufacturers produce certain basic starches for us, and we in turn complete the manufacturing process of starches through our finishing channels.

We utilize our global network of manufacturing facilities to support key global product lines.

Products

Our portfolio of products is generally classified into the following categories: Starch Products, Sweetener Products, and Co-products and others. Within these categories, a portion of our products are considered specialty ingredients. We refer to the remainder as core products. We describe these three general product categories in more detail below, along with a broader discussion of specialty ingredients within the product portfolio.

Starch Products: Our starch products represented approximately 46 percent of our net sales for each of 2020, 2019 and 2018. Starches are an important component in a wide range of processed foods, where they are used for adhesion, clouding, dusting, expansion, fat replacement, freshness, gelling, glazing, mouthfeel, stabilization, and texture. Cornstarch is sold to cornstarch packers for sale to consumers. Starches are also used in paper production to create a smooth surface for printed communications and to improve strength in recycled papers. Specialty starches are used for enhanced drainage, fiber retention, oil and grease resistance, improved printability, and biochemical oxygen demand control. The textile industry uses starches and specialty starches for sizing (abrasion resistance) to provide size and finishes for manufactured products. Industrial starches are used in the production of construction materials, textiles, adhesives, pharmaceuticals, and cosmetics, as well as in mining, water filtration, and oil and gas drilling. Specialty starches are used for biomaterial applications including biodegradable plastics, fabric softeners and detergents, hair and skin care applications, dusting powders for surgical gloves, and in the production of glass fiber and insulation.

Table of Contents

Sweetener Products: Our sweetener products represented approximately 35 percent, 36 percent, and 36 percent of our net sales for 2020, 2019 and 2018, respectively. Sweeteners include products such as glucose syrups, high maltose syrup, high fructose corn syrup, dextrose, polyols, maltodextrin, glucose syrup solids, and non-GMO (genetically modified organism) syrups. Our sweeteners are used in a wide variety of food and beverage products, such as baked goods, snack foods, canned fruits, condiments, candy and other sweets, dairy products, ice cream, jams and jellies, prepared mixes, table syrups, soft drinks, fruit-flavored drinks, beer, and many others. These sweetener products also offer functionality in addition to sweetness, such as texture, body and viscosity; help control freezing points, crystallization, and browning; add humectancy (ability to add moisture) and flavor; and act as binders. Our high maltose syrups speed the fermentation process, allowing brewers to increase capacity without adding capital. Dextrose has a wide range of applications in the food and confection industries, in solutions for intravenous (“IV”) and other pharmaceutical applications, and numerous industrial applications like wallboard, biodegradable surface agents, and moisture control agents. Our specialty sweeteners provide affordable, natural, reduced calorie and sugar-free solutions for our customers.

Co-products and others: Co-products and others accounted for approximately 19 percent, 18 percent, and 18 percent of our net sales for 2020, 2019 and 2018, respectively. Refined corn oil (from germ) is sold to packers of cooking oil and to producers of margarine, salad dressings, shortening, mayonnaise, and other foods. Corn gluten feed is sold as animal feed. Corn gluten meal is sold as high-protein feed for chickens, pet food, and aquaculture. Our other products include fruit and vegetable products, such as concentrates, purees, and essences, as well as pulse proteins and hydrocolloids systems and blends.

Specialty Ingredients within the product portfolio: We consider certain of our products to be specialty ingredients. Specialty ingredients accounted for approximately 32 percent of our net sales for 2020, up from 30 percent and 29 percent in 2019 and 2018, respectively. These ingredients deliver more functionality than our other products and add additional customer value. Our specialty ingredients are aligned with growing market and consumer trends such as health and wellness, clean-label, simple ingredients, affordability, indulgence, and sustainability.

We drive growth for our specialty ingredients portfolio by leveraging the following five growth platforms: Starch-based Texturizers, Clean and Simple Ingredients, Sugar Reduction and Specialty Sweeteners, Food Systems, and Plant-based Proteins.

Starch-based Texturizers: These ingredients support the structure and texture behind great eating experiences. Products are made from corn, potato, rice, and tapioca and offer a multitude of textures, functionalities, and stability during processing and shelf life to a broad range of food products.

Clean and Simple Ingredients:These functional ingredients address the clean label trend for finished products made with shorter lists of food ingredients that have achieved broad consumer acceptance. From food and beverages to pet food and personal care, consumers are looking for clean, simple, natural, and authentic products that they can identify and trust. The broad portfolio of clean label ingredients includes: starches, sweeteners, flours, nutrition ingredients, emulsifiers and fruit and vegetable concentrates.

Sugar Reduction and Specialty Sweeteners: These solutions provide sweetness and functional replacement for sugar in reduced-calorie and sugar-free foods and beverages without sacrificing quality and consistency. These specialty ingredients are made from a variety of GMO and non-GMO raw material bases and include such ingredients as plant-based stevia sweeteners, polyols, dextrose, and allulose, a rare sugar.

Food Systems: These systems deliver proven ingredient combinations to accelerate product development that enable customers to get to market faster. A food system can address an array of functional challenges, including: mouthfeel/texture for dairy and alternative dairy products, thickening of sauces, stabilization in high-protein drinks, gelling for fruit fillings, film formers for candy shells, foaming and frothing, adding soluble fibers and nutritional ingredients, adhering particles to breads, and emulsification of flavors.

Table of Contents

Plant-based Proteins: These specialty pulse-based protein ingredients bring solutions made from lentils, chickpeas, fava beans, and peas. They add protein, dietary fiber, micronutrients and texture to food and beverages.

Competition

The starch and sweetener industry is highly competitive. Competition within our markets is largely based on product functionality, price, and quality. Many of our products are viewed as basic ingredients that compete with virtually identical products and derivatives manufactured by other companies in the industry. The U.S. is a highly competitive market with operations by other starch processors, several of which are divisions of larger enterprises. Some of these competitors, unlike us, have vertically integrated their starch processing and other operations. Competitors include ADM’s Starches and Sweeteners business within its Carbohydrates Solutions business segment (“ADM,” a division of Archer-Daniels-Midland Company), Cargill, Inc. (“Cargill”), Tate & Lyle Ingredients Americas, Inc. (“Tate & Lyle”), and several others. Our operations in Mexico and Canada face competition from U.S. imports and local producers including ALMEX, a Mexican joint venture between ADM and Tate & Lyle. In South America, Cargill has starch processing operations in Brazil and Argentina. We also face competition from Roquette Frères S.A. (“Roquette”) primarily in our North America region. Many smaller local corn and tapioca processors also operate in many of our markets.

Several of our products also compete with products made from raw materials other than corn. High fructose corn syrup and monohydrate dextrose compete principally with cane and beet sugar products. Co-products such as corn oil and gluten meal compete with products of the corn dry milling industry and with soybean oil, soybean meal, and other products. Fluctuations in prices of these competing products may affect prices of, and profits derived from, our products.

Customers

We supply a broad range of customers in over 60 industries worldwide. The following table provides the approximate percentage of total net sales by industry for each of our industries served in 2020:

Total North South Asia

Industries Served Company America America Pacific EMEA

Brewing 7 8 16 3 —

Food and Beverage Ingredients 71 71 69 72 72

Animal Nutrition 10 10 16 5 7

No customer accounted for 10 percent or more of our net sales in 2020, 2019, or 2018.

Raw Materials

Corn (primarily yellow dent) is the primary basic raw material we use to produce starches and sweeteners. The supply of corn in the U.S. has been, and is anticipated to continue to be, adequate for our domestic needs. The price of corn, which is determined by reference to prices on the Chicago Board of Trade, fluctuates as a result of various factors including: farmers’ planting decisions, climate, domestic and foreign government policies (including those related to the production of ethanol), livestock feeding, shortages or surpluses of world grain supplies, and trade agreements. We use starch from potato processors as the primary raw material to manufacture ingredients derived from potato-based starches. We also use tapioca, gum, rice, plant-based stevia, peas, and sugar as raw materials.

Table of Contents

Corn is also grown in other areas of the world, including China, Brazil, Europe, Argentina, Mexico, South Africa, Canada and Pakistan. Our subsidiaries outside the U.S. utilize both local supplies of corn and corn imported from other geographic areas, including the U.S. The supply of corn for these subsidiaries is also generally expected to be adequate for our needs. Corn prices for our non-U.S. affiliates generally fluctuate as a result of the same factors that affect U.S. corn prices.

We also utilize specialty grains such as waxy and high amylose corn in our operations. In general, the planning cycle for our specialty grain sourcing begins three years in advance of the anticipated delivery of the specialty corn since the necessary seed must be grown in the season prior to grain contracting. In order to secure these specialty grains at the time of our anticipated needs, we contract with certain farmers to grow the specialty corn approximately two years in advance of delivery. These specialty grains have a higher cost due to their more limited supply and require longer planning cycles to mitigate the risk of supply shortages.

Due to the competitive nature of our industry and the availability of substitute products not produced from corn, such as sugar from cane or beets, end-product prices may not necessarily fluctuate in a manner that correlates to raw material costs of corn.

We follow a policy of hedging our exposure to commodity price fluctuations with commodities futures and options contracts primarily for certain of our North American corn purchases. We use derivative hedging contracts to protect the gross margin of our firm-priced business primarily in North America. Other operations may or may not be hedged at any given time based on management’s judgment as to the need to fix the costs of our raw materials to protect our profitability. Outside of North America, we generally enter into short-term commercial sales contracts and adjust our selling prices based upon the local raw material costs. See Item 7A. Quantitative and Qualitative Disclosures about Market Risk, in the section entitled “Commodity Costs” for additional information.

Other raw materials used in our manufacturing processes include starch from potato processors as the primary raw material to manufacture ingredients derived from potato-based starches. In addition, we use tapioca, particularly in certain of our production processes in the Asia-Pacific region. While the price of tapioca fluctuates from time-to-time as a result of growing conditions, the supply of tapioca has been, and is anticipated to continue to be, adequate for our production needs in the various markets in which we operate. In addition to corn, potato, and tapioca, we use pulses, gums, rice, plant-based stevia, peas, and sugar as raw materials, among others.

Research and Development

We have a global network of more than 500 scientists working in 32 Ingredion Idea Labs® innovation centers with headquarters in Bridgewater, New Jersey. Activities at Bridgewater include plant science and physical, chemical and biochemical modifications to food formulations, food sensory evaluation, and development of non-food applications such as starch-based biopolymers. In addition, we have product application technology centers that direct our product development teams worldwide to create product application solutions to better serve the ingredient needs of our customers. Product development activity is focused on developing product applications for identified customer and market needs. Through this approach, we have developed value-added products for use by customers in various industries. We usually collaborate with customers to develop the desired product application either in the customers’ facilities, our technical service laboratories, or on a contract basis. These efforts are supported by our marketing, product technology, and technology support staff. R&D expense was approximately $43 million in 2020, $44 million in 2019, and $46 million in 2018. Our R&D expense represents investment in new product development and innovation. Our R&D is further supplemented by technical support services to assist our customers with application development and co-creation.

Table of Contents

Sales and Distribution

Our salaried sales personnel, who are generally dedicated to customers in a geographic region, sell our products directly to manufacturers and distributors. In addition, we have staff that provide technical support to our sales personnel on an industry basis. We generally contract with trucking companies to deliver our bulk products to customer destinations. In North America, we generally use trucks to ship to nearby customers. For those customers located considerable distances from our manufacturing facilities, we use either rail or a combination of railcars and trucks to deliver our products. We generally lease railcars for terms of three to ten years.

Patents, Trademarks, and Technical License Agreements

We owned more than 1,750 and 750 patents and patents pending as of December 31, 2020 and 2019, respectively, which relate to a variety of products and processes, and a number of established trademarks under which we market our products. We also have the right to use other patents and trademarks pursuant to patent and trademark licenses. We do not believe that any individual patent or trademark is material to our business. There is no currently pending challenge to the use or registration of any of our patents or trademarks that would have a material negative impact on our business or our results of operations if decided in a manner adverse to us.

Human Capital Resources

As of December 31, 2020, the Company had approximately 12,000 employees, of whom approximately 2,600 were located in the U.S. As of the same date, approximately 31 percent of our U.S. employees and 32 percent of our total Company employees were unionized.

The following table provides additional information about our employees as of December 31, 2020.

Percentage of Percentage of

Approximate Non-unionized Unionized

Region Number of Employees Employees Employees

We believe that our future growth and innovation depend on a company culture that values and promotes diversity and inclusion. Our diverse and inclusive workforce fuels our high-performance culture and attracts and helps us to retain top talent and sustain our competitive advantage.

We leverage the diverse experience and skills of our Business Resource Groups (“BRGs”) to help inform our business strategy. Our BRGs, such as Alliance of Black Employees, Women of Ingredion Network, and PRIDE for our LGBTQ+ cohorts, are integral in maintaining and improving a culture of inclusion and belonging at Ingredion. We have implemented BRGs across our global operations. Our BRGs play an essential role in connecting employees across regions and providing them with opportunities to enhance cultural awareness and enable collaboration.

In addition, we have joined the Paradigm for Parity® coalition, pledging our commitment to achieving gender parity in corporate leadership roles by 2030. Currently, both the Company’s Board of Directors and its Executive Leadership team are comprised of more than 25% women. The Paradigm for Parity Action Plan is to significantly increase the number of women in senior operating roles.

Table of Contents

To continue to attract, develop, and retain top talent, the Company employs a variety of tools and strategies to assess capabilities, identify skills gaps and provide growth and advancement opportunities based on the needs of the business and our employees. Our total approach to compensation and benefits rewards our employees based on the overall contribution to the business. In addition, we regularly assess employee engagement levels and proactively seek continuous improvement in the workplace.

Government Regulation

As a manufacturer and marketer of food items and items for use in the pharmaceutical industry, our operations and the use of many of our products are subject to various federal, state, foreign and local statutes and regulations, including the Federal Food, Drug and Cosmetic Act and the Occupational Safety and Health Act. We and many of our products are also subject to regulation by various government agencies, including the U.S. Food and Drug Administration. Among other things, applicable regulations prescribe requirements and establish standards for product quality, purity, and labeling. Failure to comply with one or more regulatory requirements can result in a variety of sanctions, including monetary fines. No such fines of a material nature were imposed on us in 2020. We may also be required to comply with federal, state, foreign, and local laws regulating food handling and storage. We believe these laws and regulations have not negatively affected our competitive position.

Our operations are also subject to various federal, state, foreign, and local laws and regulations with respect to environmental matters, including air and water quality, and other regulations intended to protect public health and the environment. We operate industrial boilers that fire natural gas, coal, or biofuels to operate our manufacturing facilities and they, along with product dryers, are our primary source of greenhouse gas emissions. In Argentina, we are in discussions with local regulators addressing our possible undertaking to conduct studies of possible environmental remediation programs at our Chacabuco manufacturing facility. We are unable to predict the outcome of these discussions, but do not believe that the ultimate cost of remediation will be material.

During 2020, we spent approximately $12 million for environmental control and wastewater treatment equipment to be incorporated into existing facilities and in planned construction projects. We currently anticipate that we will invest approximately $26 million for environmental facilities and programs in 2021.

Based on current laws and regulations and the enforcement and interpretations thereof, we do not expect that the costs of future environmental compliance will be a material expense, although there can be no assurance that we will remain in compliance or that the costs of remaining in compliance will not have a material adverse effect on our future financial condition and results of operations.

Other

Our Internet address is www.ingredion.com. We make available, free of charge through our Internet website, our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended. These reports are made available as soon as reasonably practicable after they are electronically filed with or furnished to the Securities and Exchange Commission. Our corporate governance guidelines, board committee charters and code of ethics are posted on our website, the address of which is www.ingredion.com, and each is available in print to any stockholder upon request in writing to Ingredion Incorporated, 5 Westbrook Corporate Center, Westchester, Illinois 60154, Attention: Corporate Secretary. The contents of our website are not incorporated by reference into this report.

Table of Contents

Information about our Executive Officers

Set forth below, as of January 31, 2021, is information about all of our executive officers, indicating their positions and offices with the Company and other business experience. Our executive officers are elected annually by the Board to serve until the next annual election of officers and until their respective successors have been elected and have qualified, or until their earlier resignation or removal by the Board.

Name Age Positions, Offices and Business Experience

Table of Contents

ITEM 1A. RISK FACTORS

Our business and assets are subject to varying degrees of risk and uncertainty. The following are factors that we believe could cause our actual results to differ materially from expected and historical results. Additional risks that are currently unknown to us or that we currently view as immaterial may also impair our business or adversely affect our financial condition or results of operations. In addition, forward-looking statements within the meaning of the federal securities laws that are contained in this Form 10-K or in our other filings or statements may be subject to the risks described below as well as other risks and uncertainties. See the cautionary notice regarding forward-looking statements in Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Risks Related to Our Business and Our Industry

The spread of COVID-19, is adversely affecting, and is expected to continue to adversely affect, demand for our products and our financial results.

In December 2019, a novel strain of coronavirus (COVID-19) was reported to have surfaced in Wuhan, China. COVID-19 has since spread to over 100 countries, including every state in the United States. On March 11, 2020 the World Health Organization declared COVID-19 a pandemic, and on March 13, 2020 the U.S. declared a national emergency with respect to COVID-19.

Our global operations expose us to risks associated with COVID-19. We continue to monitor the health of the employees in each of our 46 manufacturing facilities, domestically and outside the U.S., as COVID-19 related illness at a particular location could impact continued manufacturing operations at that location.

Foreign governmental organizations and governmental organizations at the national, state and local levels in the U.S. have taken various actions to combat the spread of COVID-19, including imposing stay-at-home orders that effectively close “non-essential” businesses and their operations. Because we manufacture food ingredients, our operations are currently considered “essential” under most current COVID-19 government regulations, thus permitting us to continue operations at our facilities and sales activities consistent with those regulations.

Certain of our customers, however, are deemed to be “non-essential” industries and businesses under governmental regulations. The industries and businesses deemed “non-essential” vary by country and region. For example, Mexico declared one or more brewing producers as “non-essential” industries for a period of time during the pandemic. Our customers in affected industries are not able to produce goods during the government-mandated closures, which adversely affects customer demand for our products. Further, government-enacted stay-at-home orders have significantly limited the end-consumers’ ability in the U.S. and foreign markets to purchase certain food or beverage products due to limitations on the operations of restaurants, bars and regionally specific sales channels. We expect that these limitations over time will continue to negatively affect customer demand for our products, further impacting our revenues and our operating results. Further, any inability by our customers to produce goods may delay our customers’ ability to pay outstanding receivables, which would adversely impact our cash flow from operations and working capital.

In addition, COVID-19 has impacted and may further impact the broader economies of affected countries, including negatively affecting economic growth, the proper functioning of financial and capital markets, foreigncurrency exchange rates, and interest rates. Such risks include, in addition to those described above, negative impacts on our cost of and access to capital, pressure to extend our customers’ payment terms, insolvency of our customers resulting in increased provisions for credit losses, and counterparty failures in our supply chain, customer network or otherwise that would negatively impact our operations. These risks individually and in the aggregate could have a material adverse effect on our operating results, financial condition, cash flows and prospects.

Table of Contents

Changes in consumer preferences and perceptions may lessen the demand for our products, which could reduce our sales and profitability and harm our business.

Food products are often affected by changes in consumer tastes, national, regional and local economic conditions and demographic trends. For instance, changes in prevailing health or dietary preferences causing consumers to avoid food products containing sweetener products, including high fructose corn syrup, in favor of foods that are perceived as being more healthy, could materially reduce our sales and profitability. Increasing concern among consumers, public health professionals and government agencies about the potential health concerns associated with obesity and inactive lifestyles (reflected, for instance, in taxes designed to combat obesity, which have been imposed recently in North America) represent a significant challenge to some of our customers, including those engaged in the food and soft drink industries, and could materially affect demand for our products.

Current economic conditions may adversely impact demand for our products, reduce access to credit and cause our customers and others with whom we do business to suffer financial hardship, all of which could adversely impact our business, results of operations, financial condition, and cash flows.

Economic conditions in South America, the European Union, and many other countries and regions in which we do business have experienced various levels of weakness over the last few years and may continue to do so for the foreseeable future. General business and economic conditions that could affect us include barriers to trade (including as a result of tariffs, duties, and border taxes, among other factors), the strength of the economies in which we operate, unemployment, inflation, and fluctuations in debt markets. While currently these conditions have not impaired our ability to access credit markets and finance our operations, there can be no assurance that there will not be a further deterioration in the financial markets.

There could be a number of other effects from these economic developments on our business, including reduced consumer demand for products, pressure to extend our customers’ payment terms, insolvency of our customers resulting in increased provisions for credit losses, decreased customer demand, including order delays or cancellations, and counterparty failures negatively impacting our operations.

In connection with our defined benefit pension plans, adverse changes in investment returns earned on pension assets and discount rates used to calculate pension and related liabilities or changes in required pension funding levels may have an unfavorable impact on future pension expenses and cash flows.

In addition, volatile worldwide economic conditions and market instability may make it difficult for us, our customers, and our suppliers to accurately forecast future product demand trends, which could cause us to produce excess products that could increase our inventory carrying costs. Alternatively, this forecasting difficulty could cause a shortage of products that could result in an inability to satisfy demand for our products.

Our reliance on certain industries for a significant portion of our sales could have a material adverse effect on our business.

Approximately 54 percent of our 2020 net sales were made to companies engaged in the food industry and approximately 10 percent of our 2020 net sales were made to companies in the beverage industry. Additionally, sales to the animal nutrition and brewing industry represented approximately 10 percent and approximately 7 percent, respectively, of our 2020 net sales, while 19 percent of our 2020 net sales were made to companies engaged in other industries. If our food customers, beverage customers, animal feed customers, or brewing industry customers were to substantially decrease their purchases, our business might be materially adversely affected.

Table of Contents

The uncertainty of acceptance of products developed through biotechnology could affect our profitability.

The commercial success of agricultural products developed through biotechnology, including genetically modified corn, depends in part on public acceptance of their development, cultivation, distribution and consumption. Public attitudes can be influenced by claims that genetically modified products are unsafe for consumption or that they pose unknown risks to the environment, even if such claims are not based on scientific studies. These public attitudes can influence regulatory and legislative decisions about biotechnology. The sale of our products, which may contain genetically modified corn, could be delayed or impeded because of adverse public perception regarding the safety of our products and the potential effects of these products on human health, the environment, and animals.

Our future growth could be negatively impacted if we fail to continue introducing innovative new products and services.

A significant portion of our growth depends on innovation in products, processes, and services. Our research and development efforts may not result in new products and services at a rate or of a quality sufficient to gain market acceptance.

It may be difficult to preserve operating margins and maintain market share in the highly competitive environment in which we operate.

We operate in a highly competitive environment. Competition in markets in which we compete is largely based on price, quality, and product availability. Many of our products compete with virtually identical or similar products manufactured by other companies in the starch and sweetener industry. In the U.S., our competitors include divisions of larger enterprises that have greater financial resources than we do. Some of these competitors, unlike us, have vertically integrated their corn refining and other operations. Many of our products also compete with products made from raw materials other than corn, including cane and beet sugar. Fluctuation in prices of these competing products may affect prices of, and profits derived from, our products. In addition, government programs supporting sugar prices indirectly impact the price of corn sweeteners, especially high fructose corn syrup. Furthermore, co-products such as corn oil and gluten meal compete with products of the corn dry milling industry and with soybean oil, soybean meal, and other products, the price of some of which may be affected by government programs such as tariffs or quotas.

Due to market volatility, we may be unable to pass potential increases in the cost of corn and other raw materials on to customers through product price increases, or to purchase quantities of corn and other raw materials at prices sufficient to sustain or increase our profitability.

The price and availability of corn and other raw materials are subject to volatility as a result of economic and industry conditions, including supply and demand factors such as crop disease and severe weather conditions that include drought, floods, or frost. These conditions are difficult to anticipate, are beyond our control, and could adversely impact our profitability by affecting the prices we pay for raw materials.

Raw material and energy price fluctuations, and supply interruptions and shortages could adversely affect our results of operations.

Our finished products are made primarily from corn. Purchased corn and other raw material costs account for between 40 percent and 65 percent of finished product costs. Some of our products are based upon specific varieties of corn that are produced in significantly less volumes than yellow dent corn. These specialty grains are higher-cost due to their more limited supply and require planning cycles of up to three years in order for us to receive our desired amounts of specialty corn. We also manufacture certain starch-based products from potatoes. Our current potato starch requirements constitute a material portion of the total available North American supply. It is possible that, in the long term, continued growth in demand for potato starch-based ingredients and new product development could result in capacity constraints. Also, we utilize tapioca in the manufacturing of starch products primarily in Thailand, as well as pulses, gum, rice, plant-based stevia, and other raw materials around the world. A significant supply disruption or sharp increase in any of these raw material prices that we are unable to recover through pricing increases to our customers could have an adverse impact on our growth and profitability.

Table of Contents

Energy costs represent approximately 9 percent of our finished product costs. We use energy primarily to create steam required for our production processes and to dry products. We consume coal, natural gas, electricity, wood, and fuel oil to generate energy.

The market prices for our raw materials may vary considerably depending on supply and demand, world economies, trade agreements and tariffs, and other factors. We purchase these commodities based on our anticipated usage and future outlook for these costs. We may not be able to purchase these commodities at prices that we can adequately pass on to customers to sustain or increase profitability.

In North America, we sell a large portion of our finished products derived from corn at firm prices established in supply contracts typically lasting for periods of up to one year. In order to minimize the effect of volatility in the cost of corn related to these firm-priced supply contracts, we enter into corn futures and options contracts, or take other hedging positions in the corn futures market. These derivative contracts typically mature within one year. At expiration, we settle the derivative contracts at a net amount equal to the difference between the then-current price of the commodity and the derivative contract price. The fluctuations in the fair value of these hedging instruments may adversely affect our cash flow. We fund any unrealized losses or receive cash for any unrealized gains on futures contracts on a daily basis. While the corn futures contracts or hedging positions are intended to minimize the effect of volatility of corn costs on operating profits, the hedging activity can result in losses, some of which may be material.

An inability to contain costs could adversely affect our future profitability and growth.

Our future profitability and growth depends on our ability to contain operating costs and per unit product costs and to maintain and implement effective cost control programs, while at the same time maintaining competitive pricing and superior quality products, customer service, and support. Our ability to maintain a competitive cost structure depends on continued containment of manufacturing, delivery, freight, and administrative costs, as well as the implementation of cost-effective purchasing programs for raw materials, energy, and related manufacturing requirements.

If we are unable to contain our operating costs and maintain the productivity and reliability of our production facilities, our profitability and growth could be adversely affected.

Climate change and future costs of environmental compliance may be material.

Our business could be affected in the future by national and global regulation or taxation of greenhouse gas emissions, as well as the potential effects of climate change. Changes in precipitation extremes, droughts and water availability have the potential to impact Ingredion's agricultural supply as well as the availability of water for our manufacturing operations. Globally, a number of countries have instituted or are considering climate change legislation and regulations. Ingredion continues to assess the impact of climate change, regulatory pressures and changing consumer behaviors on our business strategy. It is difficult at this time to estimate the likelihood of passage or predict the potential impact of any additional legislation. Potential consequences could include increased energy, transportation, and raw materials costs, and we may be required to make additional investments in our facilities and equipment.

We may not successfully identify and complete acquisitions or strategic alliances on favorable terms or achieve anticipated synergies relating to any acquisitions or alliances, and such transactions could result in unforeseen operating difficulties and expenditures and require significant management resources.

We regularly review potential acquisitions of complementary businesses, technologies, services, or products, as well as potential strategic alliances. We may be unable to find suitable acquisition candidates or appropriate partners with which to form partnerships or strategic alliances. Even if we identify appropriate acquisition or alliance candidates, we may be unable to complete such acquisitions or alliances on favorable terms, if at all. In addition, the process of integrating an acquired business, technology, service, or product into our existing business and operations may result in unforeseen operating difficulties and expenditures. Integration of an acquired company also may require significant management resources that otherwise would be available for ongoing development of our business. Moreover, we may not realize the anticipated benefits of any acquisition or strategic alliance, and such transactions may not generate anticipated financial

Table of Contents

results. Future acquisitions could also require us to issue equity securities, incur debt, assume contingent liabilities, or amortize expenses related to intangible assets, any of which could harm our business.

Operating difficulties at our manufacturing facilities could adversely affect our operating results.

Producing starches and sweeteners through corn refining is a capital intensive industry. We conduct preventive maintenance and de-bottlenecking programs at our 46 manufacturing facilities designed to maintain and improve grind capacity and facility reliability. If we encounter operating difficulties at a facility for an extended period of time or start-up problems with any capital improvement projects, we may not be able to meet a portion of sales order commitments and could incur significantly higher operating expenses, both of which could adversely affect our operating results. We also use boilers to generate steam required in our production processes. An event that impaired the operation of a boiler for an extended period of time could have a significant adverse effect on the operations of any manufacturing facility in which such event occurred.

In addition, we are subject to risks related to such matters as product safety and quality; compliance with environmental, health and safety and food safety regulations; and customer product liability claims. The liabilities that could result from these risks may not always be covered by, or could exceed the limits of, our insurance coverage related to product liability and food safety matters. In addition, negative publicity caused by product liability and food safety matters may damage our reputation. The occurrence of any of the matters described above could adversely affect our revenues and operating results.

We operate a multinational business subject to the economic, political, and other risks inherent in operating in foreign countries and with foreign currencies.

We have operated in foreign countries and with foreign currencies for many years. Our results are subject to foreign currency exchange fluctuations. Our operations are subject to political, economic, and other risks. There has been and continues to be significant political uncertainty in some countries in which we operate. Economic changes, terrorist activity, and political unrest may result in business interruption or decreased demand for our products. Protectionist trade measures and import and export licensing requirements could also adversely affect our results of operations.

We primarily sell products derived from world commodities. Historically, we have been able to adjust local prices relatively quickly to offset the effect of local currency devaluations versus the U.S. dollar, although we cannot guarantee our ability to do this in the future. For example, due to pricing controls on many consumer products imposed in the recent past by the Argentine government, it currently takes longer than previously to achieve pricing improvement in response to currency devaluations versus the U.S. dollar in Argentina. The anticipated strength in the U.S. dollar may continue to involve risks, as it could take us an extended period of time to fully recapture the impact of foreign currency devaluations versus the U.S. dollar, particularly in South America.

We may hedge transactions that are denominated in a currency other than the currency of the operating unit entering into the underlying transaction. Our hedging activities may not be fully successful in limiting the adverse impacts of our currency risks.

Our profitability could be negatively impacted if we fail to maintain satisfactory labor relations.

As of December 31, 2020, approximately 31 percent of our U.S. employees and 32 percent of our total Company employees were members of unions. Strikes, lockouts, or other work stoppages or slowdowns involving our unionized employees could have a material adverse effect on our business results of operations.

Natural disasters, war, acts and threats of terrorism, pandemics, and other significant events could negatively impact our business.

The economies of any countries in which we sell or manufacture products or purchase raw materials could be affected by natural disasters. Such natural disasters could include, among others, earthquakes, floods, or severe weather;

Table of Contents

war, acts of war, or terrorism; or the outbreak of an epidemic or pandemic. Any such natural disaster could result in asset write-offs, decreased sales and overall reduced cash flows.

The recognition of impairment charges on goodwill or long-lived assets could adversely impact our future financial position and results of operations.

We have $1.3 billion of total net intangible assets as of December 31, 2020, consisting of $902 million of goodwill and $444 million of other net intangible assets, which constitute 13 percent and 6 percent, respectively, of our total assets as of such date. Additionally, we have $2.8 billion of long-lived assets, or 41 percent of our total assets, as of December 31, 2020.

We perform an annual impairment assessment for goodwill and our indefinite-lived intangible assets, and as necessary, for other long-lived assets. If the results of such assessments were to show that the fair value of these assets were less than the carrying values, we could be required to recognize a charge for impairment of goodwill or long-lived assets, and the amount of the impairment charge could be material. We continue to monitor our reporting units in struggling economies and recent acquisitions for circumstances affecting these businesses that may negatively impact the fair value of these reporting units.

In addition, during the fourth quarter of 2020, we recorded an impairment of $35 million related to our indefinite-lived intangible asset associated with the TIC Gums tradename. During the first quarter of 2021, we will record an impairment affecting South American net assets contributed to a joint venture. See Note 15 of the Notes to the Consolidated Financial Statements for additional information.

The future occurrence of a potential indicator of impairment, such as a significant adverse change in the business climate that would require a change in our assumptions or strategic decisions made in response to economic or competitive conditions, could require us to perform an assessment prior to the next required assessment date of July 1, 2021.

Our profitability may be affected by other factors beyond our control.

Our operating income and ability to increase profitability depend to a large extent upon our ability to price finished products at a level that will cover manufacturing and raw material costs and provide an acceptable profit margin. Our ability to maintain appropriate price levels is determined by a number of factors largely beyond our control, such as aggregate industry supply and market demand, which may vary from time to time, and the economic conditions of the geographic regions in which we conduct our operations.

Risks Related to Our Regulatory Compliance

Government policies and regulations could adversely affect our operating results.

Our operating results could be affected by changes in trade, monetary and fiscal policies, laws and regulations, and other activities of the U.S. and foreign governments, agencies, and similar organizations. These conditions include, among others, changes in a country’s or region’s economic or political conditions, modification or termination of trade agreements or treaties promoting free trade, creation of new trade agreements or treaties, trade regulations affecting production, pricing and marketing of products, local labor conditions and regulations, reduced protection of intellectual property rights, changes in the regulatory or legal environment, restrictions on currency exchange activities, currency exchange rate fluctuations, burdensome taxes and tariffs, and other trade barriers. International risks and uncertainties, including changing social and economic conditions as well as terrorism, political hostilities, and war, could limit our ability to transact business in these markets and could adversely affect our revenues and operating results.

Our operations could be adversely affected by actions taken in connection with cross-border disputes by the governments of countries in which we conduct business.

Table of Contents

Changes in our tax rates or exposure to additional income tax liabilities could impact our profitability.

We are subject to income taxes in the U.S. and in foreign jurisdictions. Our effective tax rates could be adversely affected by changes in the mix of earnings by jurisdiction, changes in tax laws, or tax rates changes in the valuation of deferred tax assets and liabilities and material adjustments from tax audits.

The Tax Cuts and Jobs Act (“TCJA”), which was enacted in December 2017, significantly altered existing U.S. tax law and includes numerous and complex provisions that substantially affect our business. The U.S. Treasury Department and the Internal Revenue Service continue to interpret and issue guidance on provisions of the TCJA that could differ from the way in which we interpret some of the provisions. Consequently, we may make adjustments to our provision for income taxes based on differences in interpretation in the periods in which guidance is issued.

Significant changes in the tax laws of the U.S. and numerous foreignjurisdictions in which we do business could result from the base erosion and profit shifting (“BEPS”) project undertaken by the Organization for Economic Cooperation and Development (“OECD”). AnOECD-led coalition of 44 countries is contemplating changes to long-standing international tax norms that determine each country’s right to tax cross-border transactions. These contemplated changes, as adopted bycountries in which we do business, could increase tax uncertainty and the riskof double taxation, thereby adversely affecting our provision forincome taxes.

The recoverability of our deferred tax assets, which are predominantly in Brazil, Canada, Germany, Mexico, and the U.S., is dependent upon our ability to generate future taxable income in these jurisdictions. In addition, the amount of income taxes we pay is subject to ongoing audits in various jurisdictions and a material assessment by a governing tax authority could affect our profitability and cash flows.

Risks Related to Our Financing Activities

Increased interest rates could increase our borrowing costs.

We may continue to issue debt securities to finance acquisitions, capital expenditures, and working capital, or for other general corporate purposes. An increase in interest rates in the general economy could result in an increase in our borrowing costs for these financings, as well as under our credit facility debt that bears interest at an unhedged floating rate.

We may not have access to the funds required for future growth and expansion.

We may not have access to additional funds we need to grow and expand our operations. We expect to fund our capital expenditures from operating cash flow to the extent we are able to do so. If our operating cash flow is insufficient to fund our capital expenditures, we may either reduce our capital expenditures or utilize borrowings under our credit facilities. For further strategic growth through mergers or acquisitions, we may also seek to generate additional liquidity through the sale of debt or equity securities in private or public markets or through the sale of assets. We cannot provide any assurance that our cash flows from operations will be sufficient to fund anticipated capital expenditures or that we will be able to obtain additional funds from financial markets or from the sale of assets at terms favorable to us. If we are unable to generate sufficient cash flows or raise sufficient additional funds to cover our capital expenditures or other strategic growth opportunities, we may not be able to achieve our desired operating efficiencies and expansion plans, which may adversely impact our competitiveness and, therefore, our results of operations. Our working capital requirements, including margin requirements on open positions on futures exchanges, are directly affected by the price of corn and other agricultural commodities, which may fluctuate significantly and change quickly.

Table of Contents

Risks Related to Our Information Technology Systems

Our information technology systems, processes, and sites may suffer interruptions, security breaches, or failures which may affect our ability to conduct our business.

Our operations rely on certain key information technology systems, which are dependent on services provided by third parties, and provide critical data connectivity, information, and services for internal and external users. These interactions include, among others, ordering and managing materials from suppliers, risk management activities, converting raw materials to finished products, inventory management, shipping products to customers, processing transactions, summarizing and reporting results of operations, human resources benefits and payroll management, complying with regulatory, legal and tax requirements, and other processes necessary to manage our business. Increased information technology security and social engineering threats and more sophisticated computer crime, including advanced persistent threats, pose potential risks to the security of our information technology systems, networks and services, as well as the confidentiality, availability and integrity of our third-party and employee data. We have put in place security measures to protect ourselves against cyber-based attacks and disaster recovery plans for our critical systems. However, if our information technology systems are breached, damaged, or cease to function properly due to any number of causes, such as catastrophic events, power outages, security breaches, or cyber-based attacks, and if our disaster recovery plans do not effectively mitigate the risks on a timely basis, we may encounter significant disruptions that could interrupt our ability to manage our operations, cause loss of valuable data and actual or threatened legal actions, and cause us to suffer damage to our reputation, all of which may adversely impact our revenues, operating results, and financial condition. We reported a malware incident that occurred from October 2019 to December 2019, although this incident did not have a material impact on our business.

The costs to address the foregoing security problems and security vulnerabilities before or after a cyber incident could be significant. Remediation efforts may not be successful and could result in interruptions, delays or cessation of service and loss of existing or potential customers that may impede our sales, manufacturing or other critical functions. Breaches of our security measures and the unapproved dissemination of proprietary information or sensitive or confidential data about us or our customers or other third parties could expose us, our customers or other affected third parties to a risk of loss or misuse of this information, result in regulatory enforcement, litigation and potential liability for us, damage our brand and reputation or otherwise harm our business. We rely in certain limited capacities on third-party data management providers and other vendors whose possible security problems and security vulnerabilities may have similar effects on us.

Risks Related to Investment in Our Common Stock

Volatility in the stock market, fluctuations in quarterly operating results, and other factors could adversely affect the market price of our common stock.

The market price for our common stock may be significantly affected by factors such as our announcement of new products or services or such announcements by our competitors; technological innovation by us, our competitors or other vendors; quarterly variations in our operating results or the operating results of our competitors; general conditions in our or our customers’ markets; and changes in earnings estimates by analysts or reported results that vary materially from such estimates. In addition, the stock market has experienced significant price fluctuations that have affected the market prices of equity securities of many companies that have been unrelated to the operating performance of any individual company.

No assurance can be given that we will continue to pay dividends, or as to the amount of any dividend we pay.

The payment of dividends, as well as the amount of any dividends, is solely at the discretion of our Board of Directors. Future dividend payments, if any, also will be subject to our financial results and the availability of statutory surplus funds to pay dividends. These factors could result in a change to our current policy of paying dividends.

Table of Contents

We identified a material weakness in our internal controls related to ineffective information technology general controls which, if not remediated appropriately or timely, could result in loss of investor confidence and adversely impact our stock price.

Internal controls related to the operation of information technology (“IT”) systems are critical to maintaining adequate internal control over financial reporting. As disclosed in Part II, Item 9A. Controls and Procedures during the fourth quarter of fiscal 2020, management identified a material weakness in internal control related to ineffective information technology general controls in the areas of user access over certain IT systems that support the Company’s financial reporting processes. As a result, management concluded that our internal control over financial reporting was not effective as of December 31, 2020. We seek to remediate the material weakness prior to the end of fiscal 2021, but may not succeed in doing so. Remedial measures may require us to invest in additional technology and other expenses. If we are unable to remediate the material weakness, or are otherwise unable to maintain effective internal control over financial reporting or disclosure controls and procedures, our ability to record, process and report financial information accurately, and to prepare financial statements within required time periods, could be adversely affected, which could subject us to litigation or investigations requiring management resources and payment of legal and other expenses, negatively affect investor confidence in our financial statements and adversely impact our stock price.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

Table of Contents

ITEM 2. PROPERTIES

We own or lease (as noted below), directly and through our consolidated subsidiaries, 46 manufacturing facilities. In addition, we lease our corporate headquarters in Westchester, Illinois and our research and development facility in Bridgewater, New Jersey.

The following list provides information about our manufacturing facilities within each of our four reportable business segments as of January 31, 2021:

North America South America Asia-Pacific EMEA

Cardinal, Ontario, Canada Baradero, Argentina Ganzhou, China Hamburg, Germany

Oxnard, California, U.S.(a) Barranquilla, Colombia Ban Kao Dien, Thailand

Idaho Falls, Idaho, U.S. Cali, Colombia Kalasin, Thailand

Bedford Park, Illinois, U.S. Lima, Peru Sikhiu, Thailand

Mapleton, Illinois, U.S. Banglen, Thailand (a)

Indianapolis, Indiana, U.S.

Cedar Rapids, Iowa, U.S.

Fort Fairfield, Maine, U.S.

Belcamp, Maryland, U.S.

North Kansas City, Missouri, U.S.

South Sioux City, Nebraska, U.S.

Winston-Salem, North Carolina, U.S.

Salem, Oregon, U.S.

Charleston, South Carolina, U.S.

Richland, Washington, U.S.

Moses Lake, Washington, U.S.

Plover, Wisconsin, U.S.

(a) Facility is leased.

(b) Facility is partially owned and partially leased.

We believe our manufacturing facilities are sufficient to meet our current production needs. We conduct preventive maintenance and de-bottlenecking programs designed to further improve grind capacity and facility reliability.

We have electricity co-generation facilities at our manufacturing facilities in London, Ontario, Canada; Cardinal, Ontario, Canada; Bedford Park, Illinois; Winston-Salem, North Carolina; San Juan del Rio, Queretaro and Mexico City, CDMX, Mexico; Cali, Colombia; Cornwala, Jaranwala, Pakistan; and Balsa Nova and Mogi-Guacu, Brazil. These facilities provide electricity at a lower cost than is available from third parties. We generally own and operate the co-generation facilities, except for the facilities at our Mexico City and Brazil locations, which are owned by, and operated pursuant to co-generation agreements with third parties.

In recent years, we have made significant capital expenditures to update, expand and improve our facilities. Total cash paid for capital expenditures and mechanical stores was $340 million in 2020. We expect that these capital expenditures will allow us to operate efficient facilities for the foreseeable future.

Table of Contents

ITEM 3. LEGAL PROCEEDINGS

In 2015 and 2016, the Company self-reported certain monitoring and recordkeeping issues relating to environmental regulatory matters involving its Indianapolis, Indiana manufacturing facility. In September 2017, following inspections and the provision by the Company of requested information to the U.S. Environmental Protection Agency (the “EPA"), the EPA issued the Company a Notice of Violation, which included additional alleged violations beyond those self-reported by the Company. These additional alleged violations primarily relate to the results of stack testing at the facility. No individual allegation in the Notice of Violation, whether from the self-reported information, the inspections or the additional requested information, is material to us. The EPA has referred the overall matter to the U.S. Department of Justice, Environment and Natural Resources Division (the "DOJ"). The DOJ and the Company began discussions with respect to this matter in September 2020. Negotiations between the Company and the DOJ with respect to the Notice of Violation are continuing and no litigation has been initiated with respect to the Notice of Violation.

We are currently subject to claims and suits arising in the ordinary course of business, including those relating to labor matters, certain environmental proceedings, and commercial claims. We also routinely receive inquiries from regulators and other government authorities relating to various aspects of our business, including with respect to compliance with laws and regulations relating to the environment, and at any given time, we have matters at various stages of resolution with the applicable governmental authorities. The outcomes of these matters are not within our complete control and may not be known for prolonged periods of time. We do not believe that the results of currently known legal proceedings and inquires will be material to us. There can be no assurance, however, that such claims, suits or investigations or those arising in the future, whether taken individually or in the aggregate, will not have a material adverse effect on our financial condition or results of operations.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

Table of Contents

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Trading: Shares of our common stock are traded on the New York Stock Exchange under the ticker symbol “INGR.”

Holders: The number of active stockholders of record of our common stock was 3,491 at January 31, 2021.

Dividends: We have a history of paying quarterly dividends. The amount and timing of the dividend payment, if any, is based on a number of factors including estimated earnings, financial position and cash flow. The payment of a dividend, as well as the amount of any dividend, is solely at the discretion of our Board of Directors. Future dividend payments will be subject to our financial results and the availability of funds and statutory surplus to pay dividends.

Issuer Purchases of Equity Securities: The following provides information about our stock repurchase program.

Maximum Number

(or Approximate

Total Number of Dollar Value) of

Total Average Shares Purchased as Shares That May Yet

Number Price Part of Publicly be Purchased Under

of Shares Paid Announced Plans or the Plans or Programs

(shares in thousands) Purchased per Share Programs at End of Period

Total — — —

On October 22, 2018, the Board of Directors authorized a stock repurchase program permitting us to purchase up to 8.0 million of our outstanding shares of common stock from November 5, 2018 through December 31, 2023. At December 31, 2020, we have 5.9 million shares available for repurchase under our current stock repurchase program.

Table of Contents

ITEM 6. SELECTED FINANCIAL DATA

Selected financial data is provided below.

Summary of operations:

Net earnings per common share of Ingredion:

Balance sheet data:

Additional data:

Mechanical stores expense 54 57 57 57 57

(a) Includes PureCircle Limited (“PureCircle”) from July 1, 2020 forward.

(b) Includes Western Polymer LLC (“Western Polymer”) from March 1, 2019 forward.

Table of Contents

(i) Includes non-controlling interest.

Table of Contents

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Overview

We are a major supplier of high-quality food and industrial ingredient solutions to customers around the world. We have 46 manufacturing facilities located in North America, South America, Asia-Pacific and Europe, the Middle East and Africa (“EMEA”), and we manage and operate our businesses at a regional level. We believe this approach provides us with a unique understanding of the cultures and product requirements in each of the geographic markets in which we operate, bringing added value to our customers. Our ingredients are used by customers in the food, beverage, brewing, and animal feed industries, among others.

Our strategic growth roadmap is based on five growth platforms and is designed to deliver shareholder value by accelerating customer co-creation and enabling consumer-preferred innovation. Our first platform is starch-based texturizers, the second platform is clean and simple ingredients, the third platform is plant-based proteins, the fourth platform is sugar reduction and specialty sweeteners, and finally, our fifth platform is value-added food systems.

Critical success factors in our business include managing our manufacturing costs, including costs for corn, other raw materials, and utilities. In addition, our global operations expose us to fluctuations in foreign currency exchange rates. We use derivative financial instruments, when appropriate, for the purpose of minimizing the risks and costs associated with fluctuations in certain raw material and energy costs, foreign exchange rates, and interest rates. The capital intensive nature of our business requires that we generate significant cash flow over time in order to selectively reinvest in our operations and grow organically, as well as to expand through strategic acquisitions and alliances. We utilize certain key financial metrics relating to return on invested capital and financial leverage to monitor our progress toward achieving our strategic business objectives (see section entitled “Key Financial Performance Metrics”).

For the year ended December 31, 2020, operating income, net income, and diluted earnings per common share declined from 2019 levels. The decreases were attributable primarily to reductions in volumes driven by government-mandated shutdowns associated with COVID-19, particularly in the Americas, increased restructuring and impairment charges associated with the impairments of an indefinite-lived intangible asset and an equity method investment, and the results of the acquired operations of PureCircle Limited (“PureCircle”). The declines were partially offset by the benefit from Brazilian tax matters.

COVID-19: Our operations in recent periods have been adversely affected by impacts of COVID-19. On March 11, 2020, the World Health Organization declared COVID-19 a pandemic, and on March 13, 2020 the United States declared a national emergency with respect to COVID-19. Our global operations expose us to risks associated with public health crises, including pandemics such as COVID-19. Foreign governmental organizations and governmental organizations at the national, state and local levels in the United States have taken various actions to combat the spread of COVID-19, including imposing stay-at-home orders and closing “non-essential” businesses and their operations. As a manufacturer of food ingredients, our operations are considered “essential” under most current COVID-19 government regulations, and our facilities are operating globally. We did not experience any material supply chain interruptions during the twelve months ended December 31, 2020 and were able to continue to operate and ship products from our global network of manufacturing facilities without material interruptions. We experienced sales volume decline in the second and third quarters of 2020 due to COVID-19 impacts on consumer mobility and consumption. We place top priority on our employees’ health and safety and continue to follow the advice and the guidelines of public health authorities for physical distancing and to make available personal protective equipment and sanitization supplies.

INGR US Equity

INGR · 10-K · period ended 2020-12-31

ITEM 1. BUSINESS

ITEM 1A. RISK FACTORS

ITEM 1B. UNRESOLVED STAFF COMMENTS

ITEM 2. PROPERTIES

ITEM 3. LEGAL PROCEEDINGS

ITEM 4. MINE SAFETY DISCLOSURES

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

ITEM 6. SELECTED FINANCIAL DATA

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

INGR US Equity☆

INGR · 10-K · period ended 2020-12-31

ITEM 1. BUSINESS

ITEM 1A. RISK FACTORS

ITEM 1B. UNRESOLVED STAFF COMMENTS

ITEM 2. PROPERTIES

ITEM 3. LEGAL PROCEEDINGS

ITEM 4. MINE SAFETY DISCLOSURES

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

ITEM 6. SELECTED FINANCIAL DATA

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

INGR US Equity