Item 1A. Risk Factors.
You should carefully consider the risks and uncertainties described below and the other information in this Annual Report on Form 10-K, including our consolidated financial statements and related notes appearing elsewhere in this Annual Report on Form 10-K and in Part II. Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations. Our business, financial condition, results of operations or prospects could be materially and adversely affected if any of these risks occurs. This Annual Report on Form 10-K also contains forward-looking statements that involve risks and uncertainties. See “Forward-Looking Statements.” Our actual results could differ materially and adversely from those anticipated in these forward-looking statements as a result of certain factors, including those set forth below.
Risks Related to Our Financial Condition and Capital Requirements
We have a limited operating history in developing medical devices and biopharmaceutical products, have not completed any pivotal clinical studies and have no products approved for commercial sale in the United States, which may make it difficult for you to evaluate our current business and predict our future success and viability.
Medical device and biopharmaceutical product development is a highly speculative undertaking and involves a substantial degree of risk. We are an organ-editing metabolic therapeutics company with a limited operating history in developing medical devices and biopharmaceutical products, which makes it difficult to evaluate our business and prospects in future product development. We have no products approved for commercial sale in the United States and have not generated any revenue from product sales. We received a CE mark for Revita in Europe in 2016, and have received reimbursement authorization through NUB in Germany for the treatment of T2D. To date, we have devoted substantially all of our resources and efforts to increasing our manufacturing capacity, raising capital, discovering, identifying and developing potential product candidates, securing related intellectual property rights and undertaking preclinical and clinical studies of our product candidates, including the ongoing Revitalize-1 pivotal clinical study of Revita in patients with inadequately controlled T2D despite being on up to three ADAs and 20 to 100 units of insulin daily. We have not yet demonstrated our ability to successfully complete any pivotal clinical studies, submit a Premarket Approval application, or PMA, a new drug application, or NDA, or biologic license application, or BLA, or similar marketing authorization application, manufacture a commercial-scale product or arrange for a third party to do so on our behalf, or conduct sales and marketing activities necessary for successful product commercialization. As a result, it may be more difficult for you to accurately predict our future success or viability to develop new medical devices and biopharmaceutical products than it could be if we had a longer operating history.
In addition, we may encounter unforeseen expenses, difficulties, complications, delays and other known and unknown factors and risks frequently experienced by medical device and biopharmaceutical companies developing products in rapidly evolving fields. We also may need to transition from a company with a research focus to a company capable of supporting commercial activities. If we do not adequately address these risks and difficulties or successfully make such a transition, our business will suffer.
We have incurred significant net losses since inception and we expect to continue to incur significant net losses for the foreseeable future and may never achieve or sustain profitability.
We have incurred net losses since inception, have not generated any significant revenue from product sales to date and have financed our operations primarily through the proceeds from sales of our convertible preferred stock, sales of our common stock in our initial public offering and debt financing. We have incurred a net loss of approximately $77.1 million and $46.5 million for the years ended December 31, 2023 and 2022, respectively. As of December 31, 2023, we had an accumulated deficit of approximately $346.6 million. Our losses have resulted principally from expenses incurred in research and development of our product candidates, as well as management and administrative costs and other expenses that we have incurred while building our business infrastructure. Our lead product candidate, Revita, is currently undergoing a pivotal clinical study in patients with inadequately controlled T2D despite being on up to three ADAs and 20 to 100 units of insulin daily. We expect that it will be several years, if ever, before we have a commercialized product in the United States and generate significant revenue from product sales. Even if we succeed in receiving marketing approval or certification for and commercializing one or more of our product candidates, we expect that we will continue to incur substantial research and development and other expenses as we discover, develop and market additional potential product candidates.
66
Table of Contents
We expect to continue to incur significant losses for the foreseeable future, and we expect these losses to increase substantially if and as we:
•
advance the development of our lead product candidate, Revita, and our Rejuva gene therapy candidates through preclinical and clinical development, and, if approved or certified by the FDA, other comparable foreign regulatory authorities or notified bodies, commercialization;
•
incur manufacturing costs for our product candidates;
•
increase our manufacturing capacity;
•
seek regulatory approvals or certifications for any of our product candidates that successfully complete clinical studies;
•
increase our research and development activities to identify and develop new product candidates;
•
hire additional personnel;
•
expand our operational, financial and management systems;
•
invest in measures to protect and expand our intellectual property;
•
establish a sales, marketing, medical affairs and distribution infrastructure to commercialize any product candidates for which we may obtain marketing approval and intend to commercialize;
•
expand our manufacturing and develop our commercialization efforts; and
•
operate as a public company.
To date, we have generated insignificant revenue. To become and remain profitable, we must succeed in developing and eventually commercializing product candidates that generate significant revenue. This will require us to be successful in a range of challenging activities, including completing preclinical and clinical studies of our product candidates, obtaining regulatory approval, and manufacturing, marketing and selling any product candidates for which we may obtain regulatory approval, as well as discovering and developing additional product candidates. We may never succeed in these activities and, even if we do, may never generate any revenue in the United States or revenue that is significant enough to achieve profitability.
The net losses we incur may fluctuate significantly from quarter to quarter such that a period-to-period comparison of our results of operations may not be a good indication of our future performance. The size of our future net losses will depend, in part, on the rate of future growth of our expenses and our ability to generate revenue. Our prior losses and expected future losses have had and will continue to have an adverse effect on our working capital and our ability to achieve and maintain profitability.
Even if we achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual basis. Our failure to become and remain profitable would depress the value of our company and could impair our ability to raise capital, expand our business, maintain our development efforts, obtain product approvals, diversify our offerings or continue our operations. A decline in the value of our company could also cause you to lose all or part of your investment.
We require substantial additional capital to finance our operations. If we are unable to raise such capital when needed, or on acceptable terms, we may be forced to delay, reduce and/or eliminate one or more of our research and drug development programs or future commercialization efforts.
Developing medical devices or biopharmaceutical products, including conducting preclinical and clinical studies, is a very time-consuming, expensive and uncertain process that takes years to complete. Our operations have consumed substantial amounts of cash since inception, and we expect our expenses to increase in connection with our ongoing activities, particularly as we initiate and conduct clinical studies of, and seek marketing approval or certification for our current and any future product candidates. Even if one or more of the product candidates that we develop is approved or
67
Table of Contents
certified for commercial sale, we anticipate incurring significant costs associated with commercializing any approved or certified product candidate. Our expenses could increase beyond expectations if we are required by the FDA or other comparable foreign regulatory authorities or notified bodies to perform clinical studies or preclinical studies in addition to those that we currently anticipate. Other unanticipated costs may also arise. In addition, if we obtain marketing approval or certification for any of our product candidates, we expect to incur significant commercialization expenses related to product sales, marketing, manufacturing and distribution. Because the design and outcome of our anticipated clinical studies are highly uncertain, we cannot reasonably estimate the actual amounts necessary to successfully complete the development and commercialization of any product candidate we develop. We also expect to incur additional costs associated with operating as a public company. Accordingly, it is likely that we will need to obtain substantial additional funding beyond the proceeds from our IPO in order to maintain our continuing operations in the future.
As of December 31, 2023, we had approximately $33.2 million in cash and cash equivalents, which does not include approximately $100.3 million of aggregate net proceeds from our IPO inclusive of the approximately $1.4 million of net proceeds from the underwriters’ partial exercise of their option to purchase additional shares from us at the public offering price. Based on our current business plans, we believe that the aggregate net proceeds from our IPO, together with our existing cash and cash equivalents, will be sufficient to fund our operating expenses and capital expenditures requirements through 2025. Our estimate as to how long we expect the net proceeds from our IPO, together with our existing cash and cash equivalents, to be able to continue to fund our operating expenses and capital expenditures requirements is based on assumptions that may prove to be wrong, and we could use our available capital resources sooner than we currently expect. Changing circumstances, some of which may be beyond our control, could cause us to consume capital significantly faster than we currently anticipate, and we may need to seek additional funds sooner than planned.
Our future funding requirements will depend on many factors, including, but not limited to:
•
the initiation, progress, timeline, cost and results of our clinical studies for our product candidates;
•
the initiation, progress, timeline, cost and results of additional research and preclinical studies related to pipeline development and other research programs we initiate in the future;
•
the cost and timing of manufacturing activities as we advance our product candidates through clinical development and commercialization;
•
the potential expansion of our current development programs to seek new indications;
•
the potential negative impact of future health crises, including epidemics and pandemics, on our business;
•
the outcome, timing and cost of meeting regulatory requirements established by the FDA and other comparable foreign regulatory authorities or notified bodies;
•
the ability of healthcare providers to obtain coverage and adequate reimbursement by third-party payors for procedures using our products, if approved (or certified), and any additional products we commercialize, as well as any future changes to coverage or reimbursement policies that may increase our competition or reduce reimbursement for procedures using our products, if approved (or certified);
•
the cost of filing, prosecuting, defending and enforcing patent claims and other intellectual property rights, in-licensed or otherwise;
•
the effect of competing technological and market developments;
•
the payment of licensing fees, potential royalty payments and potential milestone payments;
•
the cost of general operating expenses;
•
the cost and timing of completion of commercial-scale manufacturing and product development activities;
•
market acceptance of our product candidates, if cleared, approved or certified;
68
Table of Contents
•
the cost of establishing sales, marketing, and distribution capabilities for any product candidates for which we may receive regulatory approval or certification in regions where we choose to commercialize our products, if approved (or certified), on our own; and
•
the cost of operating as a public company.
We plan to use the net proceeds from our IPO to complete the ongoing Revitalize-1 pivotal clinical study of Revita and fund the Remain-1 study; fund the continued preclinical development of our Rejuva gene therapy candidates; and for working capital and other general corporate purposes, including medical education and other commercial readiness activities. Advancing the development of our product candidates will require a significant amount of capital. The net proceeds from our IPO and our existing cash and cash equivalents will not be sufficient to fund all of the activities that are necessary to complete the development and commercialize our product candidates, if approved (or certified).
We will be required to obtain further funding through public or private equity offerings, debt financings, collaborations and licensing arrangements or other sources, which may dilute our stockholders or restrict our operating activities. Other than our credit agreement, we do not have any committed external source of funds. Adequate additional financing may not be available to us on acceptable terms, or at all. Additionally, the impact of global macroeconomic events on the capital markets may affect the availability, amount and type of financing available to us in the future. Our failure to raise capital as and when needed or on acceptable terms would have a negative impact on our financial condition and our ability to pursue our business strategy, and we may have to delay, reduce the scope of, suspend or eliminate one or more of our research-stage programs, clinical studies or future commercialization efforts.
Our credit agreement contains restrictive and financial covenants that may limit our operating flexibility.
Our credit agreement contains certain restrictive covenants that either limit our ability to, or require a mandatory prepayment in the event that we (i) engage in businesses other than businesses in which we are currently engaged or businesses reasonably related or complementary thereto, or (ii) subject to certain baskets and exceptions, incur additional indebtedness or liens, make certain investments, make certain payments of indebtedness, pay dividends or make any other distributions, merge with other companies or consummate certain changes of control, acquire other companies, transfer or dispose of certain assets, and enter into transactions with affiliates, among other things. We therefore may not be able to engage in any of the foregoing transactions unless we obtain the consent of all or a majority of the lenders under the credit agreement or prepay our outstanding obligations under the credit agreement. The credit agreement contains the following financial covenants: (i) a minimum liquidity covenant requiring us to maintain a minimum $10.0 million balance in cash and cash equivalents on deposit in accounts, subject to certain exceptions, and (ii) a financing milestone covenant requiring that (a) we have received proceeds from an equity financing or series of financings (including the net proceeds from the IPO) of at least $40.0 million during the period commencing on September 7, 2023 and ending on or prior to February 15, 2024, and (b) we have received equity financing or series of financings of at least $100.0 million (inclusive of such equity financing or series of financings in the preceding clause (a)) during the period commencing as of September 7, 2023 and prior to June 30, 2024. Our obligations under the credit agreement are collateralized by substantially all of our assets, including our intellectual property, but excluding certain customary and agreed upon assets. Additionally, we may not be able to generate sufficient cash flow or sales to pay the principal and interest under the credit agreement. Furthermore, our future working capital, borrowings or equity financings could be unavailable to repay or refinance the amounts outstanding under the credit agreement. In the event of a liquidation, the lenders and the agent under the credit agreement would be repaid all outstanding principal and interest prior to distribution of assets to unsecured creditors, and the holders of our common stock would receive a portion of any liquidation proceeds only if all of our creditors then existing, including the agent and lenders under the credit agreement, were first repaid in full.
Raising additional capital may cause dilution to our existing stockholders, restrict our operations or require us to relinquish rights to our product candidates on unfavorable terms to us.
We may seek additional capital through a variety of means, including through public or private equity offerings, debt financings, including our credit agreement, or other sources, including up-front payments and milestone payments from strategic collaborations. To the extent that we raise additional capital through the sale of equity or convertible debt or equity securities, your ownership interest will be diluted, and the terms may include liquidation or other preferences that adversely affect your rights as a stockholder. Such financing may result in dilution to stockholders, imposition of debt covenants, increased fixed payment obligations or other restrictions that may affect our business. If we raise additional funds through up-front payments or milestone payments pursuant to strategic collaborations with third parties, we may have to relinquish valuable rights to our product candidates, or grant licenses on terms that are not favorable to us. In addition,
69
Table of Contents
we may seek additional capital due to favorable market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans.
Unfavorable global economic conditions, including any adverse macroeconomic conditions or geopolitical events, including the conflict between Ukraine and Russia, the conflict between Israel and Hamas, and recent bank failures affecting the financial services industry, have affected and could further adversely affect our business, financial condition, results of operations or liquidity, either directly or through adverse impacts on certain of the third parties on which we rely to conduct certain aspects of our preclinical studies or clinical studies.
Our results of operations could be adversely affected by general conditions in the global economy and in the global financial markets. Global economic and business activities continue to face widespread uncertainties, and global credit and financial markets have experienced extreme volatility and disruptions in the past several years, including severely diminished liquidity and credit availability, rising inflation and monetary supply shifts, rising interest rates, labor shortages, declines in consumer confidence, declines in economic growth, increases in unemployment rates, recession risks, and uncertainty about economic and geopolitical stability. A severe or prolonged economic downturn, or additional global financial or political crises, could result in a variety of risks to our business, including delayed clinical studies or preclinical studies, delayed approval (or certification) of our product candidates, delayed ability to obtain patents and other intellectual property protection, weakened demand for our product candidates, if approved (or certified), or our ability to raise additional capital when needed on acceptable terms, if at all. The extent of the impact of these conditions on our operational and financial performance, including our ability to execute our business strategies and initiatives in the expected timeframe, as well as that of third parties upon whom we rely, will depend on future developments which are uncertain and cannot be predicted. A weak or declining economy also could strain our suppliers, possibly resulting in supply disruption. Any of the foregoing could harm our business and we cannot anticipate all of the ways in which the current economic climate and financial market conditions could adversely impact our business. Furthermore, our stock price may decline due in part to the volatility of the stock market and the general economic downturn.
Actual events involving limited liquidity, defaults, non-performance or other adverse developments that affect financial institutions, transactional counterparties or other companies in the financial services industry or the financial services industry generally, or concerns or rumors about any events of these kinds or other similar risks, have in the past and may in the future lead to market-wide liquidity problems. For example, on March 10, 2023, Silicon Valley Bank was closed by the California Department of Financial Protection and Innovation, which appointed the Federal Deposit Insurance Corporation, or FDIC, as receiver. Similarly, on March 12, 2023, Signature Bank and Silvergate Capital Corp. were each swept into receivership, and on May 1, 2023, First Republic Bank was also swept into receivership. Although a statement by the Department of the Treasury, the Federal Reserve and the FDIC indicated that all depositors of Silicon Valley Bank would have access to all of their money after only one business day of closure, including funds held in uninsured deposit accounts, borrowers under credit agreements, letters of credit and certain other financial instruments with Silicon Valley Bank, Signature Bank or any other financial institution that is placed into receivership by the FDIC may be unable to access undrawn amounts thereunder. If any of the banks which hold our cash deposits were to be placed into receivership, we may be unable to access such funds. As of December 31, 2023, substantially all of our cash on deposit was maintained at two financial institutions in the United States, and our current deposits are in excess of federally insured limits. If further failures in financial institutions occur where we hold deposits, we could experience additional risk. Any such loss or limitation on our cash, cash equivalents and short-term investments would adversely affect our business. In addition, if any of the third parties on which we rely to conduct certain aspects of our preclinical studies or clinical trials are unable to access funds pursuant to such instruments or lending arrangements with such a financial institution, such parties’ ability to fulfill their obligations to us could be adversely affected.
Our ability to utilize our net operating loss carryforwards, research and development tax credit carryforwards, and certain other tax attributes to offset taxable income or taxes may be limited.
As of December 31, 2023, we had U.S. federal and state net operating loss carryforwards of approximately $230.5 million and $220.9 million, respectively, which begin to expire at various dates beginning in 2030. Portions of these net operating loss carryforwards could expire unused and be unavailable to offset future income tax liabilities. Under the legislation enacted in 2017, commonly referred to as the Tax Cuts and Jobs Act, or the Tax Act, as modified by the Coronavirus Aid, Relief, and Economic Security, or the CARES Act, U.S. federal net operating losses incurred in taxable years beginning after December 31, 2017, may be carried forward indefinitely, but the deductibility of such federal net
70
Table of Contents
operating losses in taxable years beginning after December 31, 2020, is limited. It is uncertain how various states will respond to the Tax Act and the CARES Act.
In addition, as of December 31, 2023, we had U.S. federal and state research and development tax credit carryforwards of $10.6 million and $4.4 million, respectively. The federal research and development tax credit carryforwards will expire at various dates beginning in 2031. The state research and development tax credit carryforwards will expire at various dates beginning in 2027. We may not be able to utilize these credits for federal and state income tax purposes before they expire.
In addition, under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, and corresponding provisions of state law, if a corporation undergoes an “ownership change,” which is generally defined as a greater than 50% change, by value, in its equity ownership over a three-year period, the corporation’s ability to use its pre-change net operating loss carryforwards and other pre-change tax attributes to offset its post-change income or taxes may be limited. The completion of our IPO, together with other transactions that have occurred since our inception, may trigger such an ownership change pursuant to Section 382. To date, we have not completed an analysis under Section 382. We may experience ownership changes as a result of subsequent shifts in our stock ownership, some of which may be outside of our control. If an ownership change occurs and our ability to use our net operating loss carryforwards is materially limited, it would harm our future results of operations by effectively increasing our future tax obligations.
Risks Related to Development, Regulatory Approval and Commercialization
The regulatory approval process of the FDA, comparable foreign regulatory authorities and notified bodies, are lengthy, time-consuming and inherently unpredictable, and even if we complete the necessary clinical studies, we cannot predict when, or if, we will obtain regulatory approval or certification for any of our product candidates, and any such regulatory approval or certification may be for a more narrow indication than we seek.
The research, testing, manufacturing, labeling, approval, certification, selling, import, export, marketing, and distribution of medical devices and biopharmaceutical products are subject to extensive regulation by the FDA and other regulatory authorities in and outside the United States. We are currently in clinical-stage development of Revita, which is an investigational medical device, and are conducting preclinical development of our Rejuva PGTx candidates along with a device delivery system, which together with the gene therapy candidate, we anticipate will be regulated as a combination biologic-device.
In the United States, before we can market a new medical device, we must first receive either clearance under Section 510(k) of the Federal Food, Drug, and Cosmetic Act, or the FDCA, or approval of a PMA, from the FDA, unless an exemption applies. We expect Revita to be subject to the requirement for approval of a PMA. In the process of obtaining PMA approval, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, preclinical, clinical, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life sustaining, life supporting or implantable devices. We plan to seek approval of a PMA from the FDA for the Revita DMR Procedure to improve glycemic control and eliminate insulin needs in T2D patients who are inadequately controlled on insulin.
Modifications to products that are approved through a PMA generally require FDA approval. Both the PMA approval and the 510(k) clearance process can be expensive, lengthy and uncertain. The process of obtaining a PMA is costly and uncertain and generally takes from one to three years, or even longer, from the time the application is submitted to the FDA. In addition, a PMA generally requires the performance of one or more clinical studies. Despite the time, effort and cost, a device may not be approved by the FDA. Any delay or failure to obtain necessary regulatory approvals could harm our business. Furthermore, even if we are granted regulatory approvals, they may include significant limitations on the indicated uses for the device, which may limit the market for the device.
Similarly, we are not permitted to market any biological product in the United States or in foreign jurisdictions until we receive approval of a biologics license application, or BLA, from the FDA or approval of similar foreign applications from comparable foreign authorities. We anticipate that each of our Rejuva gene therapy candidates will be regulated as a biological product or biological product-device combination product, requiring approval of a BLA or a similar approval from comparable foreign authorities, and as the case may be, certification from a notified body. We have not previously submitted a BLA to the FDA, or similar approval filings to comparable foreign authorities. A BLA and similar approval filings must include extensive preclinical and clinical data and supporting information to establish the product candidate’s safety and effectiveness for each desired indication. The BLA must also include significant information
71
Table of Contents
regarding the chemistry, manufacturing and controls for the product, including with respect to chain of identity and chain of custody of the product. Similar requirements may apply in foreign jurisdictions.
To the extent we intend to sell medical devices in member states of the European Union, or EU, our products must comply with the general safety and performance requirements of the Medical Devices Regulation, or MDR (Regulation (EU) No 2017/745), which repeals and replaces the Medical Devices Directive, or the MDD. Compliance with these requirements is a prerequisite to be able to affix the European conformity, or CE, mark to our products, without which they cannot be sold or marketed in the EU. All medical devices placed on the market in the EU must meet the general safety and performance requirements laid down in Annex I to the MDR, including the requirement that a medical device must be designed and manufactured in such a way that, during normal conditions of use, it is suitable for its intended purpose. Medical devices must be safe and effective and must not compromise the clinical condition or safety of patients, or the safety and health of users and – where applicable – other persons, provided that any risks which may be associated with their use constitute acceptable risks when weighed against the benefits to the patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged state of the art. To demonstrate compliance with the general safety and performance requirements, we must undergo a conformity assessment procedure, which varies according to the type of medical device and its (risk) classification. Except for low risk medical devices (Class I), where the manufacturer can self-assess the conformity of its products with the general safety and performance requirements (except for any parts which relate to sterility, metrology or reuse aspects), a conformity assessment procedure requires the intervention of a notified body. Notified bodies are independent organizations designated by EU member states to assess the conformity of devices before being placed on the market. The notified body would typically audit and examine the technical file and the manufacturer’s quality system (notified bodies must presume that quality systems which implement the relevant harmonized standards—ISO 13485:2016 for Quality Management Systems—conform to these requirements), design and final inspection of our devices. If satisfied that the relevant product conforms to the relevant general safety and performance requirements, the notified body issues an EU certificate, which the manufacturer uses as a basis for its own declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on the market throughout the EU. If we fail to comply with applicable laws and regulations, we would be unable to affix the CE mark to our products, which would prevent us from selling them within the EU. See Part I, Item 1. Business—Government Regulations—Regulation of Medical Devices in the European Union for more information.
The CE mark for Revita was issued under the MDD, which has now been superseded by the MDR and we are currently working on obtaining MDR certification. Under the recently extended MDR transitional provisions, both (i) devices lawfully placed on the market pursuant to the MDD prior to May 26, 2021 and (ii) legacy devices lawfully placed on the market after May 26, 2021, in accordance with the transitional provisions of the MDR, may generally continue to be made available on the market or put into service, provided that the requirements of the transitional provisions are fulfilled. In particular, no substantial change must be made to the device as such a modification would trigger the obligation to obtain a new certification under the MDR and therefore to have a notified body conducting a new conformity assessment of the devices. Once our devices are certified under the MDR, we must inform the notified body that carried out the conformity assessment of the medical devices that we market or sell in the EU, of any planned substantial changes to our quality system or substantial changes to our medical devices that could affect compliance with the general safety and performance requirements laid down in Annex I to the MDR or cause a substantial change to the intended use for which the device has been CE marked. The notified body will then assess the planned changes and verify whether they affect the products’ ongoing conformity with the MDR. If the assessment is favorable, the notified body will issue a new certificate or an addendum to the existing certificate attesting compliance with the general safety and performance requirements and quality system requirements laid down in the Annexes to the MDR. The notified body may disagree with our proposed changes and product introductions or modifications could be delayed or canceled, which could adversely affect our ability to grow our business.
The aforementioned EU rules are generally applicable in the European Economic Area, or EEA (which consists of the 27 EU member states plus Norway, Liechtenstein and Iceland). Non-compliance with the above requirements would therefore also prevent us from selling our products, if approved, in Norway, Liechtenstein and Iceland. We cannot be certain that transitioning towards the MDR will not have any material impact on our sales in the EU and EEA and, if we were considered noncompliant and unable to sell our products in the EU and EEA, it could harm our business, operating results, prospects and financial condition.
As a result of the UK leaving the EU, since January 1, 2021, the regulatory framework and regimes for medical devices in the UK and EU have diverged. Northern Ireland has adopted a hybrid approach as a result of the divergence in accordance with the Northern Ireland Protocol. Great Britain’s national legislation remains based on the (EU) MDD as implemented nationally, however, amendments to the existing legislation are being drawn up by the Government, the core
72
Table of Contents
elements of which are expected to apply from July 1, 2025. The Medicines and Healthcare products Regulatory Agency, or MHRA, has stated that specific rules relating to post-market surveillance will be introduced in advance of the broader legislative overhaul, with such changes expected to apply from mid-2024. The MHRA has also recently confirmed that, subject to certain conditions, general medical devices compliant with the (EU) MDD or EU active implantable medical devices directive, or AIMDD, with a valid declaration and CE marking can be placed on the Great Britain market up until the sooner of expiry of certificate or June 30, 2028. The MHRA has indicated that the legislative amendments will include a requirement for newly certified devices to carry a UKCA mark.
The UKCA mark is not recognized in the EU, EEA or Northern Ireland markets, so relevant products require a CE mark for sale in these markets.
Our product candidates could fail to receive regulatory approval or certification from the FDA, a comparable foreign regulatory authority or notified body for many reasons, including:
•
disagreement with the design or conduct of our clinical studies;
•
failure to demonstrate to the satisfaction of regulatory agencies or notified bodies that our product candidates are safe and effective, or have a positive benefit/risk profile for its proposed indication;
•
serious and unexpected adverse device effects experienced by participants in our clinical studies;
•
failure of clinical studies to meet the level of statistical significance required for approval or certification;
•
disagreement with our interpretation of data from preclinical or clinical studies;
•
the insufficiency of data collected from clinical studies of our product candidates to support the submission and filing of a IND, PMA or BLA or other submission or to obtain regulatory approval or certification;
•
failure to obtain approval of our manufacturing processes or facilities of third-party manufacturers with whom we contract for clinical and commercial supplies or our own manufacturing facility; or
•
changes in the approval or certification policies or regulations that render our preclinical and clinical data insufficient for approval or certification.
This lengthy approval process as well as the unpredictability of future clinical study results may result in our failing to obtain regulatory approval or certification to market our product candidates, which would significantly harm our business, results of operations and prospects. The FDA, a comparable foreign regulatory authority or notified body may require more information, including additional preclinical or clinical data to support approval or certification, which may delay or prevent approval or certification and our commercialization plans, or we may decide to abandon the development program. If we were to obtain approval or certification, regulatory authorities or notified bodies may approve or certify any of our product candidates for fewer or more limited indications than we request (including failing to approve or certify the most commercially promising indications), may grant approval contingent on the performance of costly post-marketing clinical studies, or may approve or certify a product candidate with a label that does not include the labeling claims necessary or desirable for the successful commercialization of that product candidate. Even if our product candidates meet their safety and efficacy endpoints in clinical studies, the regulatory authorities or notified bodies may not complete their review processes in a timely manner, or we may not be able to obtain regulatory approval or certification.
We expect the novel nature of certain of our product candidates to create further challenges in obtaining regulatory approval or certification. The FDA may also require a panel of experts to deliberate on the adequacy of the safety and efficacy data to support approval. The opinion of the panel, although not binding, may have a significant impact on our ability to obtain approval of the product candidates based on the completed clinical studies, as the FDA often adheres to the panel’s recommendations. In addition, we may experience delays or rejections based upon additional government regulation from future legislation or administrative action, or changes in regulatory authority policy during the period of product development, clinical studies and the review process. Accordingly, the regulatory approval pathway for our product candidates may be uncertain, complex, expensive and lengthy, and approval may not be obtained.
73
Table of Contents
In addition, the FDA and comparable foreign regulatory authorities may change their approval policies and new regulations may be enacted. For instance, the EU pharmaceutical legislation is currently undergoing a complete review process, in the context of the Pharmaceutical Strategy for Europe initiative, launched by the European Commission in November 2020. The European Commission’s proposal for revision of several legislative instruments related to medicinal products (potentially reducing the duration of regulatory data protection, revising eligibility for expedited pathways, etc.) was published on April 26, 2023. The proposed revisions remain to be agreed and adopted by the European Parliament and European Council (not expected before early 2025) and may have a significant impact on the biopharmaceutical industry in the long term.
Clinical studies are expensive, time-consuming, difficult to design and implement, and have an uncertain outcome. Further, we may encounter substantial delays in our clinical studies.
Before obtaining regulatory approvals or certification for the commercial sale of any of our product candidates, we must demonstrate through lengthy, complex and expensive preclinical and clinical studies that our product candidates are both safe and effective for use in each target indication. Clinical testing is expensive and takes many years to complete, and is subject to uncertainty. Our clinical studies may not be conducted as planned or completed on schedule, if at all. Failure can occur at any time during the clinical study process. Even if our clinical studies are completed as planned, their results may not support the safety and effectiveness of our product candidates for their targeted indications or support continued clinical development of such product candidates. Our future clinical study results may not be successful.
In addition, even if our planned studies are successfully completed, the FDA or foreign regulatory authorities or notified bodies may not interpret the results as we do, and more studies could be required before we submit our product candidates for approval or certification. To the extent that the results of the studies are not satisfactory to the FDA or foreign regulatory authorities or notified bodies for support of a marketing application or certification, we may be required to expend significant resources, which may not be available to us, to conduct additional studies in support of potential approval of our product candidates.
We may experience delays in conducting any clinical studies and we do not know whether our clinical studies will begin on time, need to be redesigned, recruit and enroll patients on time or be completed on schedule, or at all. Events that may prevent successful or timely completion of clinical development include:
•
inability to generate sufficient data to support the initiation of clinical studies;
•
delays in sufficiently developing, characterizing or controlling a manufacturing process suitable for advanced clinical studies;
•
delays in reaching agreement with the FDA or other regulatory authorities as to the design or implementation of our clinical studies;
•
delays in or failure to obtain regulatory clearance to commence a clinical study;
•
delays in or failure to reach an agreement on acceptable terms with clinical study sites or prospective CROs, the terms of which can be subject to extensive negotiation and may vary significantly among different clinical study sites;
•
delays in or failure to obtain IRB or ethics committee approval at each site;
•
delays in or failure to recruit suitable patients to participate in a clinical study;
•
delays in or failure to have patients complete a clinical study or return for post-treatment follow-up;
•
clinical sites, CROs or other third parties deviating from study protocol or dropping out of a study;
•
failure to perform in accordance with the FDA’s good clinical practice, or GCP, requirements, or applicable regulatory guidelines in other countries;
74
Table of Contents
•
failure in addressing patient safety concerns that arise during the course of a study, including occurrence of adverse events associated with the product candidate;
•
failure to add a sufficient number of clinical study sites; or
•
failure to manufacture sufficient quantities of product candidates for use in clinical studies.
If we are required to conduct additional clinical studies or other testing of our product candidates beyond those that we currently contemplate, if we are unable to successfully complete clinical studies of our product candidates or other testing, if the results of these studies or tests are not positive or are only modestly positive or if there are safety concerns, we may:
•
incur unplanned costs;
•
be delayed in obtaining marketing approval or certification for our product candidates or not obtain marketing approval or certification at all;
•
obtain marketing approval or certification in some countries and not in others;
•
obtain marketing approval or certification for indications or patient populations that are not as broad as intended or desired;
•
obtain marketing approval or certification with labeling that includes significant use or distribution restrictions or safety warnings, including boxed warnings;
•
be subject to additional post-marketing testing requirements; or
•
have the product removed from the market after obtaining marketing approval or certification.
We could encounter delays if a clinical study is suspended or terminated by us, by the IRBs of the institutions in which such studies are being conducted, by the Data Safety Monitoring Board, or DSMB, for such study or by the FDA or other regulatory authorities. These authorities may impose such a suspension or termination due to a number of factors, including failure to conduct the clinical study in accordance with regulatory requirements or our clinical protocols, inspection of the clinical study operations or study site by the FDA or other regulatory authorities resulting in the imposition of a clinical hold, unforeseen safety issues or adverse side effects, failure to demonstrate a benefit, changes in governmental regulations or administrative actions or lack of adequate funding to continue the clinical study. We may also seek feedback from the FDA or other regulatory authorities on our clinical development program, and the FDA or such regulatory authorities may not provide such feedback on a timely basis, or such feedback may not be favorable, which could further delay our development programs.
We also cannot with any certainty whether or when we might complete a given clinical study. If we experience delays in the commencement or completion of our clinical studies, or if we terminate a clinical study prior to completion, the commercial prospects of our product candidates could be harmed, and our ability to generate revenues from our product candidates may be delayed. In addition, any delays in our clinical studies could increase our costs, slow down the development and approval or certification process and jeopardize our ability to commence product sales and generate revenues. Any of these occurrences may harm our business, financial condition and results of operations. In addition, many of the factors that cause, or lead to, a delay in the commencement or completion of clinical studies may also ultimately lead to the denial of regulatory approval of our product candidates.
We currently conduct and may in the future conduct clinical studies for our product candidates outside the United States, and the FDA or comparable foreign regulatory authorities may not accept data from such studies.
We are currently engaging in clinical studies that involve clinical sites in the United States and EU. We could also in the future plan to conduct one or more future clinical studies of our product candidates outside the United States, including in Europe. The acceptance of study data from clinical studies conducted outside the United States or another jurisdiction by the FDA or comparable foreign regulatory authorities or notified bodies may be subject to certain conditions or may not be accepted at all. In cases where data from clinical studies conducted outside the United States are intended to
75
Table of Contents
serve as the sole basis for marketing approval in the United States, the FDA will generally not approve the application on the basis of foreign data alone unless (i) the data are applicable to the United States population and United States medical practice; (ii) the studies were performed by clinical investigators of recognized competence and (iii) the data may be considered valid without the need for an on-site inspection by the FDA or, if the FDA considers such an inspection to be necessary, the FDA is able to validate the data through an on-site inspection or other appropriate means. Additionally, the FDA’s clinical study requirements, including sufficient size of patient populations and statistical powering, must be met. Many foreign regulatory bodies have similar approval requirements. In addition, such foreign studies would be subject to the applicable local laws of the foreign jurisdictions where the studies are conducted. There can be no assurance that the FDA or any comparable foreign regulatory authority or notified body will accept data from studies conducted outside of the United States or the applicable jurisdiction. If the FDA or any comparable regulatory authority or notified body does not accept such data, it would result in the need for additional studies, which would be costly and time-consuming and delay aspects of our business plan, and which may result in our product candidates not receiving approval or clearance for commercialization in the applicable jurisdiction.
We may not be able to file IDEs or IDE supplements or comparable documents in foreign jurisdictions to commence additional clinical studies on the timelines we expect, and even if we are able to, the FDA or comparable foreign regulatory authorities may not permit us to proceed.
In order to conduct a clinical investigation involving human subjects for the purpose of demonstrating the safety and effectiveness of a medical device, if necessary, for a PMA, 510(k) premarket notification or de novo classification request, a company must, among other things, apply for and obtain institutional review board, or IRB, approval of the proposed investigation. In addition, if the clinical study involves a “significant risk” (as defined by the FDA) to human health, the sponsor of the investigation must also submit and obtain FDA approval of an IDE application and follow applicable IDE regulations. Unless IDE-exempt, nonsignificant risk devices are still subject to certain abbreviated IDE requirements; however, an IDE application is not required if such abbreviated requirements are met. We may not be able to obtain any necessary FDA and/or IRB approval to undertake clinical studies in the United States for future devices we develop and intend to market in the United States. If we do obtain such approvals, the FDA may find that our studies do not comply with the IDE or other regulations governing clinical investigations or the data from any such studies may not support marketing authorization of the investigational device. Moreover, certainty that clinical studies will meet desired endpoints or produce meaningful or useful data and be free of unexpected adverse effects cannot be assured, and such uncertainty could preclude or delay marketing authorization resulting in significant financial costs and reduced revenue. Similar requirements may apply in jurisdictions outside the United States.
While we plan to submit IDEs or comparable documents for Revita, we may not be able to file such IDEs or comparable documents on the timeline we expect. For example, we may experience manufacturing delays or other delays. Moreover, we cannot be sure that submission of an IDE or comparable document will result in the FDA or other comparable foreign regulatory authorities allowing further clinical studies to begin, or that, once begun, issues will not arise that suspend or terminate clinical studies. Additionally, even if such regulatory authorities agree with the design and implementation of the clinical studies set forth in an IDE, we cannot guarantee that such regulatory authorities will not change their requirements in the future. In addition, the FDA may disapprove of our IDE or withdraw approval of a previously-approved IDE if it finds that:
•
we have not complied with certain requirements of the IDE regulations, any other applicable regulations or statutes, or any condition of approval imposed by an IRB or the FDA;
•
the application or a report contains untrue statements or omits required material information;
•
we fail to respond to a request for additional information within the time prescribed by the FDA;
•
there is reason to believe that the risks to the human subjects are not outweighed by the anticipated benefits to the subjects or the importance of the knowledge to be gained;
•
the informed consent is inadequate;
•
the investigation, as proposed, is scientifically unsound;
•
there is reason to believe that the device as used is ineffective; or
76
Table of Contents
•
it is unreasonable to begin or to continue the investigation due to the way in which the device is used or the inadequacy of:
•
the report of prior investigations or the investigational plan;
•
the methods, facilities, and controls used for the manufacturing, processing, packaging, storage, and, where appropriate, installation of the device; or
•
the monitoring and review of the investigation.
Although we would expect to submit a compliant, truthful and complete application, we cannot guarantee that the FDA would approve it. If the FDA were to disapprove our IDE application or propose to withdraw prior approval, we would have the right to request a regulatory hearing. However, we cannot guarantee what the outcome of such a hearing would be. If are required and fail to obtain approval of an IDE, the FDA may prohibit us from conducting our investigation, or place us on a “clinical hold,” which could result in significant delay to our clinical studies or prevent us from completing them at all.
We may not be able to file INDs or IND amendments or comparable documents in foreign jurisdictions to commence additional clinical studies on the timelines we expect, and even if we are able to, the FDA may not permit us to proceed.
While we plan to submit INDs or comparable documents for our Rejuva gene therapy candidates, we may not be able to file such INDs or comparable documents on the timeline we expect. For example, we may experience manufacturing delays or other delays with IND-enabling studies. Moreover, we cannot be sure that submission of an IND or comparable document will result in the FDA or other comparable foreign regulatory authorities allowing further clinical studies to begin, or that, once begun, issues will not arise that suspend or terminate clinical studies. Additionally, even if such regulatory authorities agree with the design and implementation of the clinical studies set forth in an IND, we cannot guarantee that such regulatory authorities will not change their requirements in the future. These considerations also apply to new clinical studies we may submit as amendments to existing INDs or to a new IND. Any failure to file INDs on the timelines we expect or to obtain regulatory approvals for our study may prevent us from completing our clinical studies or commercializing our product candidates on a timely basis, if at all.
Interim, topline and preliminary data from our clinical studies that we announce or publish from time to time may change as more patient data become available and are subject to audit and verification procedures that could result in material changes in the final data.
From time to time, we may publicly disclose preliminary or topline data from our preclinical and clinical studies, which is based on a preliminary analysis of then-available data, and the results and related findings and conclusions are subject to change following a more comprehensive review of the data related to the particular study or study. We also make assumptions, estimations, calculations and conclusions as part of our analyses of data, and we may not have received or had the opportunity to fully and carefully evaluate all data. As a result, the topline or preliminary results that we report may differ from future results of the same studies, or different conclusions or considerations may qualify such results, once additional data have been received and fully evaluated. Topline and preliminary data also remain subject to audit and verification procedures that may result in the final data being materially different from the topline or preliminary data we previously published. As a result, topline and preliminary data should be viewed with caution until the final data are available.
From time to time, we may also disclose interim data from our preclinical and clinical studies. Interim data from clinical studies that we may complete are subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. Adverse differences between interim data and final data could significantly harm our business prospects. Further, disclosure of interim data by us or by our competitors could result in volatility in the price of our common stock.
In addition, the information we choose to publicly disclose regarding a particular study or clinical study is based on what is typically extensive information, and you or others may not agree with what we determine is material or otherwise appropriate information to include in our disclosure. If the interim, topline, or preliminary data that we report differ from actual results, or if others, including regulatory authorities, disagree with the conclusions reached, our ability to
77
Table of Contents
obtain approval for, and commercialize, our product candidates may be harmed, which could harm our business, operating results, prospects or financial condition.
Our product candidates may cause serious adverse events or undesirable side effects or have other properties which may cause us to suspend or discontinue clinical studies, delay or prevent regulatory approval or certification, limit the commercial profile of an approved label, or result in significant negative consequences following marketing approval, if any.
Undesirable side effects that may be caused by our product candidates could cause us or regulatory authorities to interrupt, delay or halt clinical studies and could result in a more restrictive label than anticipated or the delay or denial of regulatory approval or certification by the FDA or comparable foreign regulatory authorities or notified bodies. Results of our clinical studies could reveal a high and unacceptable severity and prevalence of side effects or unexpected characteristics.
If unacceptable side effects or deaths arise in the development of our product candidates, we, the FDA, the IRBs at the institutions in which our studies are conducted, DSMB or other regulatory authorities could suspend or terminate our clinical studies or the FDA or other regulatory authorities could order us to cease clinical studies or deny approval or certification of our product candidates for any or all targeted indications. Undesirable side effects or deaths in clinical studies with our product candidates may cause the FDA or comparable foreign regulatory authorities to place a clinical hold on the associated clinical studies, to require additional studies, or otherwise to delay or deny approval or certification of our product candidates for any or all targeted indications. Such side effects could also affect patient recruitment or the ability of enrolled patients to complete the study or result in potential product liability claims. In addition, these side effects may not be appropriately recognized or managed by the treating medical staff. We expect to have to train medical personnel using our product candidates to understand the side effect profiles for our clinical studies and upon any commercialization of any of our product candidates. Inadequate training in recognizing or managing the potential side effects of our product candidates could result in patient injury or death. Any of these occurrences may harm our business, financial condition and prospects significantly.
Additionally, if one or more of our product candidates receives marketing approval or certification and we or others later identify undesirable side effects or adverse events caused by such products, a number of potentially significant negative consequences could result, including but not limited to:
•
regulatory authorities or notified bodies may suspend, limit or withdraw approvals or certifications of such product, or seek an injunction against its manufacture or distribution;
•
regulatory authorities or notified bodies may require additional warnings on the label, or issue safety alerts, Dear Healthcare Provider letters, press releases or other communications containing warnings or other safety information about the product;
•
we may be required to change the way the product is administered or conduct additional clinical studies or post-approval studies;
•
we may be required to create a risk evaluation and mitigation strategy, or REMS, or similar mitigation plans in the case of our Rejuva gene therapy candidates, which could include a medication guide outlining the risks of such side effects for distribution to patients;
•
we may be subject to fines, injunctions or the imposition of criminal penalties;
•
we could be sued and held liable for harm caused to patients; and
•
our reputation may suffer.
Any of these events could prevent us from achieving or maintaining market acceptance of the particular product candidate, if approved or certified, and could seriously harm our business.
78
Table of Contents
In previous clinical studies conducted by third parties involving viral vectors for gene therapy, some patients experienced serious adverse events, including the development of leukemia due to vector-related insertional oncogenesis. If our vectors demonstrate a similar effect, we may be required to halt or delay clinical development of our Rejuva gene therapy candidates or future gene therapy candidates.
A significant risk in any gene therapy product based on viral vectors is that the vector will insert in or near cancer-causing oncogenes leading to uncontrolled clonal proliferation of mature cancer cells in the patient. For example, in 2003, clinical studies using early versions of murine gamma-retroviral vectors, which integrate with, and thereby alter, the host cell’s DNA, have led to several well-publicized adverse events, including reported cases of leukemia. The cause of these adverse events was shown to be insertional oncogenesis, which is the process whereby the corrected gene inserts in or near a gene that is important in a critical cellular process like growth or division, and this insertion results in the development of a cancer, often leukemia. Using molecular diagnostic techniques, it was determined that clones from these patients showed retrovirus insertion in proximity to the promoter of the LMO2 proto-oncogene. Earlier generation retroviruses like the one used in these two studies have been shown to preferentially integrate in regulatory regions of genes that control cell growth.
These well-publicized adverse events led to the development of new viral vectors, such as AAV vectors, which is what we use for our planned Rejuva gene therapy candidates, with the goal of potentially improved safety profiles, as well as the requirement of enhanced safety monitoring in gene therapy clinical studies, including routine performance of vector copy number analysis on all production lots to monitor the number of insertion events per cell. Notwithstanding the potential safety improvements of AAV vectors, the risk of insertional oncogenesis remains a significant concern for gene therapy, and we cannot be certain that it will not occur in any of our clinical studies. There is also the potential risk of delayed adverse events following exposure to gene therapy products due to persistent biological activity of the genetic material or other components of products used to carry the genetic material. The FDA has stated that AAV vectors possess characteristics that may pose risks of delayed adverse events. If any such adverse events occur, advancement of our preclinical and clinical studies could be halted or delayed, which would have a material adverse effect on our business and operations.
Although Revita has received Breakthrough Device designation, there can be no guarantee that the designation will benefit the development and regulatory approval process.
Revita has received Breakthrough Device designation from the FDA for the hydrothermal ablation of the duodenal mucosa to improve glycemic control and eliminate insulin needs in T2D patients who are inadequately controlled on long-acting insulin therapy. Breakthrough Device designation is available to medical devices that meet certain eligibility criteria, including that there is a reasonable expectation that the device will provide for more effective treatment or diagnosis of life-threatening or irreversibly debilitating diseases or conditions, and that the device meets one of the following criteria: (i) the device represents a breakthrough technology, (ii) no approved or cleared alternatives exist, (iii) the device offers significant advantages over existing approved or cleared alternatives, or (iv) the availability of the device is in the best interest of patients. In granting breakthrough device designation to Revita, the FDA found the following: there is a reasonable expectation that Revita will provide for more effective treatment or T2D patients who are inadequately controlled on long-acting insulin therapy; Revita represents a breakthrough technology; Revita, if found to be safe and effective, could offer significant advantages over existing approved or cleared alternatives; and the availability of Revita, if found to be safe and effective, would be in the best interest of patients. Breakthrough Device designation provides certain benefits to device developers, including more interactive and timely communications with FDA staff, use of post-market data collection, when scientifically appropriate, to facilitate expedited and efficient development and review of the device, opportunities for efficient and flexible clinical study design, and prioritized review of premarket submissions.
However, we may not experience a faster development process or review, and Breakthrough Device designation has no bearing on whether or not we will obtain approval, as compared to conventional FDA procedures. Breakthrough Device designation does not alter or convey any advantage in the regulatory review and approval standard for medical devices. Further, the FDA may rescind Breakthrough Device designation if it believes that the designation is no longer supported by data from our clinical development program.
If healthcare providers are unable to obtain coverage or adequate reimbursement for procedures performed with our products, if approved, such products will not likely be widely used.
In the United States, the commercial success of Revita and any future products will depend, in part, on the extent to which governmental payors at the federal and state levels, including Medicare and Medicaid, private health insurers and
79
Table of Contents
other third-party payors provide coverage for and establish adequate reimbursement levels for procedures utilizing our products, if approved.
Hospitals and other healthcare providers that purchase our product, if approved, for treatment of their patients generally rely on third-party payors to pay for all or part of the costs and fees associated with our products, if approved, as part of a “bundled” rate for the associated procedures. The existence of coverage and adequate reimbursement for our products, if approved, and the procedures performed with them by government and private payors is critical to market acceptance of our existing and future products. Neither hospitals nor physicians are likely to use our product, if approved, and any future products if they do not receive adequate reimbursement for the procedures utilizing such products.
Many private payors currently base their reimbursement policies on the coverage decisions and payment amounts determined by the Centers for Medicare & Medicaid Services, or CMS, which administers the Medicare program. Others may adopt different coverage or reimbursement policies for procedures performed with our products, if approved, while some governmental programs, such as Medicaid, have reimbursement policies that vary from state to state, some of which may not pay for the procedures performed with our products in an adequate amount, if at all. A Medicare national or local coverage decision denying coverage for our products or for procedures using our products could result in private and other third-party payors also denying coverage for our products or procedures using our products. Third-party payors also may deny reimbursement for our products or procedures using our products if they determine that a product used in a procedure was not medically necessary, was not used in accordance with cost-effective treatment methods, as determined by the third-party payor, or was used for an unapproved use. Unfavorable coverage or reimbursement decisions by government programs or private payors underscore the uncertainty that our product face in the market and could have a material adverse effect on our business.
Many hospitals, clinics and other health care providers in the United States participate in group purchasing organizations, or GPOs, which may incentivize their members to make a relatively large proportion of purchases of medical technology from a limited number of vendors of similar products that have contracted with the GPO to offer discounted prices to the GPO’s members. Accordingly, the commercial success of our products may also depend to some extent on our ability to either negotiate favorable purchase contracts with key group purchasing organizations and/or persuade hospitals and clinics to purchase our product “off contract.” The healthcare industry in the United States has experienced a trend toward cost containment as government and private payors seek to control healthcare costs by paying service providers lower rates. While we believe that hospitals will be able to obtain coverage for procedures using our products, the level of payment available to them for such procedures may change over time. State and federal healthcare programs, such as Medicare and Medicaid, closely regulate provider payment levels and have sought to contain, and sometimes reduce, payment levels. Private payors frequently follow government payment policies and are likewise interested in controlling increases in the cost of medical care. In addition, some payors are adopting pay-for-performance programs that differentiate payments to healthcare providers based on the achievement of documented quality-of-care metrics, cost efficiencies, or patient outcomes. These programs are intended to provide incentives to providers to deliver the same or better results while consuming fewer resources. Because of these programs, and related payor efforts to reduce payment levels, hospitals and other providers are seeking ways to reduce their costs, including the amounts they pay to medical device manufacturers. We may not be able to sell our product profitably if third-party payors deny or discontinue coverage or reduce their levels of payment below that which we project, or if our production costs increase at a greater rate than payment levels. Adverse changes in payment rates by payors to hospitals could adversely affect our ability to market, sell our products, and negatively affect our financial performance.
In international markets, medical device regulatory requirements and healthcare payment systems vary significantly from country to country, and many countries have instituted price ceilings on specific product lines. We cannot assure you that our products will be considered cost-effective by international third-party payors, that reimbursement will be available or, if available, that the third-party payors’ reimbursement policies will not adversely affect our ability to sell our product profitably. Any failure to receive regulatory or reimbursement approvals would negatively affect market acceptance of our products in any international markets in which those approvals are being sought.
Additional time may be required to develop and obtain regulatory approval or certification for our Rejuva gene therapy candidates because we expect it to be regulated as a combination product.
We expect our Rejuva gene therapy candidates to require the development of a drug delivery device, such that the gene therapy candidate and drug delivery device may be regulated as a biologic-device combination product that requires coordination within the FDA and similar foreign regulatory agencies and notified bodies for review of its device and biologic components. Although the FDA and similar foreign regulatory agencies and notified bodies have systems in place
80
Table of Contents
for the review and approval or certification of combination products such as our Rejuva gene therapy candidates, we may experience delays in the development, approval or certification, and commercialization of our Rejuva gene therapy candidates due to regulatory timing constraints and uncertainties in the product development and approval or certification process.
Obtaining and maintaining regulatory approval or certification of our product candidates in one jurisdiction does not mean that we will be successful in obtaining regulatory approval or certification of our product candidates in other jurisdictions.
Obtaining and maintaining regulatory approval, clearance, or certification of our product candidates in one jurisdiction does not guarantee that we will be able to obtain or maintain regulatory approval, clearance, or certification in any other jurisdiction, while a failure to obtain or delay in obtaining regulatory approval, clearance, or certification in one jurisdiction may have a negative effect on the regulatory approval, clearance, or certification process in others. For example, even if the FDA grants marketing approval of a product candidate, comparable regulatory authorities in foreign jurisdictions must also approve the manufacturing, marketing and promotion of the product candidate in those countries. Approval or certification procedures vary among jurisdictions and can involve requirements and administrative review periods different from, and greater than, those in the United States, including additional preclinical or clinical studies as clinical studies conducted in one jurisdiction may not be accepted by regulatory authorities or notified bodies in other jurisdictions. In some cases, the price that we intend to charge for our products, if approved, is also subject to approval.
We may also submit marketing applications or certifications in other countries. Regulatory authorities and notified bodies in jurisdictions outside of the United States have requirements for approval and certification of product candidates with which we must comply prior to marketing in those jurisdictions. Obtaining foreign regulatory approvals or certifications and compliance with foreign regulatory requirements could result in significant delays, difficulties and costs for us and could delay or prevent the introduction of our products, if approved, in certain countries. If we fail to comply with the regulatory requirements in international markets and/or receive applicable marketing approvals and/or certifications, our target market will be reduced and our ability to realize the full market potential of our product candidates will be harmed.
Even if we receive regulatory approval or certification of our product candidates, we will be subject to ongoing regulatory obligations and continued regulatory review, which may result in significant additional expense and we may be subject to penalties if we fail to comply with regulatory requirements or experience unanticipated problems with our product candidates.
The regulations to which we are subject are complex and have become more stringent over time. Regulatory changes could result in restrictions on our ability to continue or expand our operations, higher than anticipated costs, or lower than anticipated sales. Even after we have obtained the proper approval or certification to market a device, biological product, or combination product, we will have ongoing responsibilities under FDA regulations and applicable foreign laws and regulations.
Any regulatory approvals or certifications that we receive for our product candidates will require surveillance to monitor the safety and efficacy of the product candidate. In addition, if the FDA or a comparable foreign regulatory authority or notified body approves or certifies our product candidates, the manufacturing processes, labeling, packaging, distribution, adverse event reporting, storage, advertising, promotion, import, export and recordkeeping for our product candidates will be subject to extensive and ongoing regulatory requirements. These requirements include submissions of safety and other post-marketing information and reports, registration, as well as continued compliance with current good manufacturing practice requirements, or cGMPs, or similar foreign requirements, good clinical practice requirements, or GCPs, for any clinical studies that we conduct post-approval, and applicable product tracking and tracing requirements for certain drug and biological products. As such, we and our contract manufacturers will be subject to continual review and inspections to assess compliance with cGMP or similar foreign requirements and adherence to commitments made in any marketing application and previous responses to inspectional observations. Accordingly, we and others with whom we work must continue to expend time, money and effort in all areas of regulatory compliance, including manufacturing, production and quality control. In addition, the FDA and foreign regulatory authorities could require us to conduct another study to obtain additional safety or biomarker information.
Further, we will be required to comply with FDA and other regulatory authorities’ promotion and advertising rules, which include, among others, restrictions on promoting products for uses or in patient populations that are not described in the product’s approved uses (known as “off-label use”), limitations on industry-sponsored scientific and
81
Table of Contents
educational activities and requirements for promotional activities involving the internet and social media. Although the FDA and other regulatory authorities do not regulate a physician’s choice of drug treatment made in the physician’s independent medical judgment, they do restrict promotional communications from companies or their sales force with respect to off-label uses of products for which marketing clearance or certification has not been issued. Later discovery of previously unknown problems with our product candidates, including adverse events of unanticipated severity or frequency, or with our third-party suppliers or manufacturing processes, or failure to comply with regulatory requirements, may result in revisions to the approved labeling to add new safety information; imposition of post-market studies or clinical studies to assess new safety risks; or imposition of distribution restrictions or other restrictions under a REMS or similar program for our gene therapy candidates, if approved.
Other potential consequences include, among other things:
•
restrictions on the marketing or manufacturing of our product candidates, withdrawal of the product from the market or product recalls;
•
fines, untitled letters, warning letters or holds on clinical studies;
•
refusal by the FDA or similar foreign authorities to approve pending applications or supplements to approved applications filed by us or suspension or revocation of license approvals or similar approvals;
•
product seizure or detention, or refusal to permit the import or export of our product candidates; and
•
injunctions or the imposition of civil or criminal penalties.
FDA and other regulatory authorities’ policies may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval or certification of our product candidates. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative or executive action, either in the United States or abroad. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any marketing approval or certification that we may have obtained and we may not achieve or sustain profitability.
For instance, the regulatory landscape related to clinical trials in the EU recently evolved. The EU Clinical Trials Regulation, or CTR, which was adopted in April 2014 and repeals the EU Clinical Trials Directive, became applicable on January 31, 2022. While the Clinical Trials Directive required a separate clinical trial application, or CTA, to be submitted in each member state in which the clinical trial takes place, to both the competent national health authority and an independent ethics committee, the CTR introduces a centralized process and only requires the submission of a single application for multi-center trials. The CTR allows sponsors to make a single submission to both the competent authority and an ethics committee in each member state, leading to a single decision per member state. The assessment procedure of the CTA has been harmonized as well, including a joint assessment by all member states concerned, and a separate assessment by each member state with respect to specific requirements related to its own territory, including ethics rules. Each member state’s decision is communicated to the sponsor via the centralized EU portal. Once the CTA is approved, clinical study development may proceed. The CTR foresees a three-year transition period. The extent to which ongoing and new clinical trials will be governed by the CTR varies. Since January 31, 2023, submissions for all new clinical trials must be made under the CTR. Clinical trials for which an application was submitted (i) prior to January 31, 2022 under the Clinical Trials Directive, or (ii) between January 31, 2022 and January 31, 2023 and for which the sponsor has opted for the application of the EU Clinical Trials Directive remain governed by said Directive until January 31, 2025. After this date, all clinical trials (including those which are ongoing) will become subject to the provisions of the CTR. Compliance with the CTR requirements by us and our third-party service providers, such as CROs, may impact our developments.
The EU landscape concerning medical devices recently evolved. On May 25, 2017, the MDR entered into force, which repeals and replaces the MDD and the AIMDD. Unlike directives, which must be implemented into the national laws of the EU member states, regulations are directly applicable (i.e., without the need for adoption of EU member state laws implementing them) in all EU member states and are intended to eliminate current differences in the regulation of medical devices among EU member States.
The MDR, among other things, is intended to establish a uniform, transparent, predictable and sustainable regulatory framework across the EU and EEA for medical devices and to ensure a high level of safety and health while
82
Table of Contents
supporting innovation. See “Government Regulations—Regulation of Medical Devices in the European Union” for more information.
These modifications may have an effect on the way we intend to develop our business in the EU and EEA. For example, as a result of the transition towards the new regime, notified body review times have lengthened, and product introductions could be delayed or canceled, which could adversely affect our ability to grow our business.
We expect our Rejuva gene therapy candidates will be, and future gene therapy candidates may be, regulated as biological products, or biological product-device combination products, and therefore may be subject to competition sooner than anticipated.
The Biologics Price Competition and Innovation Act of 2009, or BPCIA, was enacted as part of the Affordable Care Act to establish an abbreviated pathway for the approval of biosimilar and interchangeable biological products. The regulatory pathway establishes legal authority for the FDA to review and approve biosimilar biologics, including the possible designation of a biosimilar as “interchangeable” based on its similarity to an approved biologic. Under the BPCIA, an application for a biosimilar product may not be submitted to the FDA until four years following the date that the reference product was first licensed by the FDA. In addition, an application for a biosimilar product cannot be approved by the FDA until 12 years after the reference product was approved under a BLA. The law is complex and is still being interpreted and implemented by the FDA. As a result, its ultimate impact, implementation, and meaning are subject to uncertainty. While it is uncertain when processes intended to implement BPCIA may be fully adopted by the FDA, any of these processes could have a material adverse effect on the future commercial prospects for our biological products.
We believe that any of the product candidates we develop that is approved in the United States as a biological product under a BLA, if any, should qualify for the 12-year period of exclusivity. However, there is a risk that this exclusivity could be shortened due to congressional action or otherwise, or that the FDA will not consider the subject product candidates to be reference products for competing products, potentially creating the opportunity for generic competition sooner than anticipated. Moreover, the extent to which a biosimilar, once approved, will be substituted for any one of the reference products in a way that is similar to traditional generic substitution for non-biological products is not yet clear, and will depend on a number of marketplace and regulatory factors that are still developing.
In addition, the approval of a biologic product biosimilar to one of our product candidates could have a material adverse impact on our business as it may be significantly less costly to bring to market and may be priced significantly lower than our products.
Disruptions at the FDA and other government agencies or notified bodies caused by funding shortages or global health concerns could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, cleared or approved, or commercialized in a timely manner or at all, which could negatively impact our business.
The ability of the FDA, similar foreign regulatory authorities and notified bodies to review and authorize or certify new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory, and policy changes, the FDA’s ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect the FDA’s ability to perform routine functions. Average review times at the agency have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA and other agencies, such as the European Medicines Agency, or the EMA, following its relocation to Amsterdam and corresponding staff changes, may also slow the time necessary for new products or modifications to cleared or approved products to be reviewed and/or approved by necessary government agencies, which would adversely affect our business. For example, over the last several years, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical employees and stop critical activities.
Separately, in response to the COVID-19 pandemic, the FDA postponed most inspections of domestic and foreign manufacturing facilities at various points. Even though the FDA has since resumed standard inspection operations of domestic manufacturing facilities where feasible, the FDA has continued to monitor and implement changes to its inspectional activities to ensure the safety of its employees and those of the firms it regulates as it adapts to the evolving COVID-19 pandemic, and any resurgence of the virus or emergence of new variants may lead to further inspectional delays. Regulatory authorities outside the United States have adopted similar restrictions or other policy measures in response to the COVID-19 pandemic. If a prolonged government shutdown occurs, or if global health concerns continue to
83
Table of Contents
prevent the FDA or other regulatory authorities or notified bodies from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities or notified bodies to timely review and process our regulatory submissions, which could have a material adverse effect on our business.
For instance in the EU, notified bodies must be officially designated to certify products and services in accordance with the MDR. However, the COVID-19 pandemic has significantly slowed down their designation process and the current designated notified bodies are facing a large amount of requests with the new regulation and notified body review times have lengthened. This situation could impact our ability to grow our business in the EU and EEA and the ability of the notified body to timely review and process our regulatory submissions and perform its audits.
A recall of our products, if approved, either voluntarily or at the direction of the FDA or another governmental authority, or the discovery of serious safety issues with our products, could have a significant adverse impact on us.
The FDA and similar foreign governmental authorities have the authority to require the recall of commercialized medical devices in the event of material deficiencies or defects in design or manufacture or in the event that a product poses an unacceptable risk to health. Manufacturers may, under their own initiative, recall a product if any material deficiency in a device is found. A government-mandated or voluntary recall by us or one of our distributors could occur as a result of an unacceptable risk to health, component failures, manufacturing errors, design or labeling defects or other deficiencies and issues. Recalls of any of our products would divert managerial and financial resources and have an adverse effect on our reputation, results of operations and financial condition, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers’ demands. We may also be required to bear other costs or take other actions that may have a negative impact on our future sales and our ability to generate profits.
Further, under the FDA’s medical device reporting regulations, we are required to report to the FDA any incident in which a commercialized medical device product may have caused or contributed to a death or serious injury or in which our product malfunctioned and, if the malfunction were to recur, would likely cause or contribute to death or serious injury. Repeated product malfunctions may result in a voluntary or involuntary product recall, which could divert managerial and financial resources, impair our ability to manufacture our products in a cost-effective and timely manner and have an adverse effect on our reputation, results of operations and financial condition.
In the EU, we must comply with the EU medical device vigilance system. Under this system, serious incidents and Field Safety Corrective Actions, or FSCAs must be reported to the relevant authorities of the EU. These reports will have to be submitted through EUDAMED—once functional—and aim to ensure that, in addition to reporting to the relevant authorities of the EU member states, other actors such as the economic operators in the supply chain will also be informed. Until EUDAMED is fully functional, the corresponding provisions of the MDD continue to apply. FSCAs must be communicated by the manufacturer or its legal representative to its customers and/or to the end users of the device through Field Safety Notices, or FSNs. For similar serious incidents that occur with the same device or device type and for which the root cause has been identified or a FSCA implemented or where the incidents are common and well documented, manufacturers may provide periodic summary reports instead of individual serious incident reports.
Any adverse event involving our products, whether in the United States or abroad, could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection, mandatory recall or other enforcement action. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results.
If we obtain approval or certification of any of our product candidates, we may be subject to enforcement action if we engage in the off-label promotion of our products.
If we obtain approval or certification for any product candidates, our promotional materials and training methods must comply with FDA and other applicable laws and regulations, including the prohibition on the promotion of off-label use. Physicians may use our products off-label, as the FDA does not restrict or regulate a physician’s choice of treatment within the practice of medicine. For example, we are pursuing market authorization for Revita to improve glycemic control and eliminate insulin needs in T2D patients inadequately controlled on insulin, but physicians may decide to use Revita for other, non-approved, T2D patient populations. If the FDA determines that our promotional materials or training constitutes promotion of an off-label use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fine
84
Table of Contents
and criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an unapproved use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement. In that event, our reputation could be damaged and adoption of the products would be impaired. Although our policy is to refrain from statements that could be considered off-label promotion of our products, the FDA or another regulatory agency could disagree and conclude that we have engaged in off-label promotion. In addition, the off-label use of our products may increase the risk of injury to patients, and, in turn, the risk of product liability claims. Product liability claims are expensive to defend and could divert our management’s attention, result in substantial damage awards against us and harm our reputation.
Risks Related to Our Business and Strategy
We are substantially dependent on the success of our lead product candidate, Revita. If we are unable to obtain marketing approval or certification for and commercialize any of our current or future product candidates in a timely manner, our business will be harmed.
Our future success is dependent on our ability to timely advance and complete clinical studies, obtain marketing approval or certification for and successfully commercialize Revita. In 2016, Revita was CE marked under the MDD. The certificate was renewed under the MDD on March 8, 2021. However, we have only received reimbursement authorization for this product in Germany for the treatment of T2D. We are investing significant efforts and financial resources in the research and development of Revita as well as our Rejuva gene therapy candidates. We are currently conducting a pivotal clinical study of Revita in patients with inadequately controlled T2D despite being on up to three ADAs and 20 to 100 units of insulin daily. Revita will require additional clinical development, evaluation of clinical manufacturing activities, marketing approval from government regulators, substantial investment and significant marketing efforts before we can generate any revenues from product sales in the United States. We are not permitted to market or promote Revita or any other product candidate, before we receive marketing approval or certification from the FDA or comparable foreign regulatory authorities or notified bodies, and we may never receive such marketing approvals or certifications.
The success of Revita will depend on several factors, including the following:
•
the successful and timely completion of our ongoing or planned clinical studies;
•
the initiation and successful patient enrollment and completion of additional clinical studies on a timely basis;
•
maintaining and establishing relationships with CROs and clinical sites for clinical development, both in the United States and internationally;
•
the frequency and severity of adverse events in the clinical studies;
•
the efficacy, safety and tolerability profiles that are satisfactory to the FDA or any comparable foreign regulatory authority or notified bodies for marketing approval or certification;
•
the timely receipt of marketing approvals or certifications from applicable regulatory authorities or notified bodies;
•
the extent of any required post-marketing approval commitments to applicable regulatory authorities;
•
maintaining our manufacturing facility and certain regulatory requirements thereof;
•
the maintenance of existing or the establishment of new supply arrangements with third-party drug product suppliers and manufacturers for clinical development;
•
the maintenance of existing, or the establishment of new, scaled production arrangements with third-party manufacturers to obtain finished products that are appropriate for commercial sale of our product candidates, if approved or certified;
•
the protection of our rights in our intellectual property portfolio;
85
Table of Contents
•
the successful launch of commercial sales following any marketing approval or certification;
•
a continued acceptable safety profile following any marketing approval;
•
commercial acceptance by patients, the medical community and third-party payors; and
•
our ability to compete with other therapies.
We do not have complete control over many of these factors, including certain aspects of clinical development and the regulatory submission process, potential threats to our intellectual property rights and the manufacturing, marketing, distribution and sales efforts of any future collaborator. If we are not successful with respect to one or more of these factors in a timely manner or at all, we could experience significant delays or an inability to successfully commercialize Revita, which would materially harm our business. If we do not receive marketing approvals or certification under the MDR for Revita, we may not be able to continue our operations.
Our long-term prospects depend in part upon discovering, developing and commercializing product candidates, which may fail in development or suffer delays that adversely affect their commercial viability. We intend to identify and develop novel product candidates, which makes it difficult to predict the time, cost and potential success of our current product candidates, and other product candidates we may develop in the future.
Our future results of operations are dependent on our ability to successfully discover, develop, obtain regulatory approval or certification for and commercialize product candidates beyond those we currently have in preclinical studies and clinical development. A product candidate can unexpectedly fail at any stage of preclinical and clinical development. The historical failure rate for product candidates is high due to risks relating to safety, efficacy, clinical execution, changing standards of medical care and other unpredictable variables. The results from preclinical or early clinical studies of a product candidate may not be predictive of the results that will be obtained in later stage clinical studies of the product candidate.
The success of the product candidates we have or may develop will depend on many factors, including the following:
•
the success of our research methodology in identifying potential indications or product candidates;
•
generating sufficient data to support the initiation or continuation of clinical studies;
•
obtaining regulatory permission to initiate clinical studies;
•
contracting with the necessary parties to conduct clinical studies;
•
successful enrollment of patients in, and the completion of, clinical studies on a timely basis;
•
the timely manufacture of sufficient quantities of the applicable product candidate for use in clinical studies;
•
the possible occurrence of adverse events in our clinical studies; and
•
any potential interruptions or delays resulting from factors related to the COVID-19 pandemic or any future public health crises, including epidemics and pandemics.
In addition, our strategy includes identifying, developing and commercializing our Rejuva gene therapy candidates by using an AAV vector for endoscopic delivery of transgenes, such as GLP-1 receptor analog, to the pancreas to enable long-term remission of T2D by potentially restoring insulin production in patients with advanced disease. Our future success depends on the successful development of our Rejuva gene therapy platform. To date, very few products that utilize gene transfer have been approved in the United States or Europe and no gene therapy products that utilize an endoscopic method of administration have been approved. In addition, there have been a limited number of clinical studies of gene transduction technologies as compared to other, more conventional forms of therapy.
86
Table of Contents
Although several AAV vectors have been tested in numerous clinical studies and are currently used in FDA-approved products, we cannot be certain that our Rejuva gene therapy candidates will successfully complete preclinical and clinical studies, or that it will not cause significant adverse events or toxicities. We also cannot be certain that we will be able to avoid triggering toxicities in our future preclinical or clinical studies or that our endoscopic method of administration will not cause unforeseen side effects or other challenges. Any such results could impact our ability to develop a product candidate, including our ability to enroll patients in our clinical studies. As a result of these factors, it is more difficult for us to predict the time and cost of our Rejuva gene therapy candidates’ development, and we cannot predict whether the application of our approach to gene therapy, or any similar or competitive programs, will result in the identification, development, and regulatory approval of Rejuva, or that other gene therapy programs will not be considered better or more attractive. There can be no assurance that any development problems we experience in the future related to our Rejuva gene therapy candidates or any of our research programs will not cause significant delays or unanticipated costs, or that such development problems can be solved. We may also experience delays and challenges in achieving sustainable, reproducible, and scalable production. Any of these factors may prevent us from completing our preclinical or clinical studies or commercializing any gene therapy candidates we may develop on a timely or profitable basis, if at all.
Even if we successfully advance any other product candidates into clinical development, their success will be subject to all of the clinical, regulatory and commercial risks described elsewhere in this “Risk Factors” section. Accordingly, we cannot assure you that we will ever be able to discover, develop, obtain regulatory approval or certification of, commercialize or generate significant revenue from our other product candidates.
We may not be able to gain the support of leading hospitals and key thought leaders, or to publish the results of our clinical studies in peer-reviewed journals, which may make it difficult to establish the Revita DMR Procedure and/or our Rejuva gene therapy candidates as a standard of care, if approved, and may limit our revenue growth and ability to achieve profitability.
Our strategy includes developing relationships with leading hospitals and key thought leaders in the industry. If these hospitals and key thought leaders determine that the Revita DMR Procedure and/or our Rejuva gene therapy candidates are not clinically effective, or that alternative technologies or products are more effective, or if we encounter difficulty promoting adoption of or establishing the Revita DMR Procedure and/or our Rejuva gene therapy candidates as a standard of care, once approved or certified, our revenue growth and our ability to achieve profitability could be significantly limited.
We believe that the successful completion of our clinical studies of the Revita DMR Procedure and our Rejuva gene therapy candidates, publication of scientific and medical results in peer-reviewed journals, and presentation of data at leading conferences are critical to the broad adoption of the Revita DMR Procedure and our Rejuva gene therapy candidates. Publication in leading medical journals is subject to a peer-review process, and peer reviewers may not consider the results of studies involving the Revita DMR Procedure and/or our Rejuva gene therapy candidates sufficiently novel or worthy of publication.
We have not yet studied the ability of Revita to be used in repeated procedures. If we are unable to demonstrate the safety and improved glycemic effects of Revita for repeat use, it could have a material adverse effect on the clinical utility and commercial adoption of the device.
We have not yet studied the ability of Revita to be used in repeat procedures. Although, in a long-term follow-up study of the PP population in our Revita-1 study, we observed a statistically significant mean HbA1c reduction of 1.0% (n=27) at 24 months in patients who underwent the Revita DMR Procedure, in combination with at least one ongoing OAD and lifestyle counseling, we cannot be certain that patients will be able to have repeat procedures in the future. If we are unable to demonstrate the safety of Revita for repeat use, it could have a material adverse effect on the clinical utility and commercial adoption of Revita because providers, referring physicians, payors and patients may not find the product to be a compelling treatment option for T2D patients. To the extent any of the aforementioned groups do not accept Revita as a compelling treatment option for T2D patients, it could significantly harm our business, financial condition and prospects.
We have never obtained marketing approval for a product candidate in the United States and we may be unable to obtain, or may be delayed in obtaining, marketing approval for any product candidate in the United States.
We have never obtained marketing approval for a product candidate in the United States. It is possible that the FDA may refuse to accept for substantive review any PMAs, BLAs or similar applications that we submit for our product candidates or may conclude after review of our data that our applications are insufficient to obtain marketing approval of
87
Table of Contents
our product candidates. We believe our proposed approach of treating T2D and obesity through the Revita DMR Procedure and our Rejuva gene therapy candidates is novel and, as a result, the process for, and the outcome of, our efforts to seek FDA approval is especially uncertain. If the FDA does not accept or approve our PMAs or BLAs for our product candidates, it may require that we conduct additional clinical, preclinical, or manufacturing validation studies and submit that data before it will reconsider our applications. Depending on the extent of these or any other FDA-required studies, approval of any PMA or BLA that we submit may be delayed or may require us to expend more resources than we have available. It is also possible that additional studies, if performed and completed, may not be considered sufficient by the FDA to approve our PMAs or BLAs.
Any delay in obtaining, or an inability to obtain, marketing approvals would prevent us from commercializing our product candidates, generating revenues, and achieving and sustaining profitability. If any of these outcomes occur, we may be forced to abandon our development efforts for our product candidates, which could significantly harm our business.
If we are unable to obtain a billing code from the U.S. Department of Health and Human Services so that procedures using Revita, if approved, are covered under Medicare and Medicaid, this could have a negative impact on our intended sales and would have a material adverse effect on our business, financial condition and operating results.
We plan to submit an application to the U.S. Department of Health and Human Services for a billing code so that procedures using Revita, if approved, are covered under Medicare and Medicaid. However, there can be no assurance that our application will be successful, or that we will be able to obtain a code in a timely manner. In the event that we do not obtain a billing code for Revita, our customers may be unable to obtain reimbursement to cover the cost of their purchases under private or government-sponsored insurance plans, which could have a negative impact on our sales and have a material adverse effect on our business, financial condition and operating results. In addition, Medicare and its administrative contractors as well as other insurers must find that Revita meets their medical necessity requirements for the treatment of patients with T2D on long-acting insulin or they will not pay for the treatment. In addition, there is a risk that the payment amount for Revita could be too low or too high to incentivize customer adoption.
If Revita, our Rejuva gene therapy candidates or any of our other future product candidates is approved or certified and fail to achieve and sustain sufficient market acceptance, we will not generate expected revenue and our business may be harmed.
Commercialization of Revita, our Rejuva gene therapy candidates and any of our other future product candidates in the United States and other jurisdictions in which we intend to pursue marketing approval or certification for such product candidates is a key element of our strategy. To be commercially successful, we must establish through clinical studies and convince physicians, hospitals and other healthcare providers, as well as potential patients, that the Revita DMR Procedure and our Rejuva gene therapy candidates are superior and attractive alternatives to currently available treatment options. Acceptance of our Rejuva gene therapy candidates and the Revita DMR Procedure depends on establishing their safety and effectiveness, including the Revita DMR Procedure’s durability in treating T2D, and educating our target audience about their distinct characteristics, potential benefits, safety and ease-of-use. If we are not successful in establishing safety, effectiveness and ease of use, and conveying that our product candidates, if approved or certified, or the procedures and treatment they enable, provide superior results compared to existing technologies, practices and/or therapies, or that these product candidates improve patient outcomes, we may experience reluctance or refusal on the part of physicians, hospitals and other healthcare providers to accept and order, and third-party payors to pay for the treatment or procedures performed with, our product candidates, or patients may elect not to undergo the Revita DMR Procedure or take our Rejuva gene therapy candidates.
We believe that physicians, hospital and other healthcare providers will not widely accept our product candidates unless they are able to determine that our product candidates provide a benefit to patients and are a superior alternative to currently available interventions and easily integrated into their current endoscopy suite. Physicians, hospitals and other healthcare providers may be hesitant to change their medical treatment practices for the following reasons, among others:
•
comfort and experience with current treatment regimens;
•
long-standing relationships with competitors and distributors that sell other products and such parties’ negative selling efforts;
•
perceived liability risks generally associated with the use of new products and procedures;
88
Table of Contents
•
lack or perceived lack of long-term clinical data relating to safety or effectiveness, including durable effectiveness;
•
difficulty in using Revita;
•
higher cost or perceived higher cost of our product candidate compared to currently available treatments; and
•
the additional time commitment that may be required for training.
These hurdles may make it difficult to demonstrate to physicians, hospitals and other healthcare providers that the Revita DMR Procedure and our Rejuva gene therapy candidates are an appropriate option for treating metabolic diseases, such as T2D and obesity, may be superior to available treatments and may be more cost-effective than alternative technologies. Furthermore, we may encounter significant difficulty in gaining inclusion in metabolic disease treatment guidelines and gaining broad market acceptance by healthcare providers, third-party payors and patients for our products, if approved, or procedures in which our products are used.
In addition, patient satisfaction with the Revita DMR Procedure and our Rejuva gene therapy candidates will be an important factor in providers’ decisions to use our products. The success of any particular procedure using our products, and a patient’s satisfaction with the procedure, is dependent on the technique and execution of the procedure by the endoscopist. Even if our products are manufactured exactly to specification, there is a risk that the endoscopist may not perform the procedure to specifications, leading to patient dissatisfaction with the procedure. If patients do not have a good outcome following procedures conducted using our products, providers’ views of our products may be negatively impacted.
If we fail to successfully commercialize our products, if approved or certified, we may never receive a return on the significant investments in product development, sales and marketing, regulatory, manufacturing and quality assurance we have made, or further investments we intend to make, and we may fail to generate revenue or gain economies of scale from such investments.
Our future growth depends on physician awareness and adoption of the Revita DMR Procedure.
We intend to focus our sales, marketing and training efforts on diabetologists, gastroenterologists and interventional endoscopists. However, the initial point of contact for many patients suffering from T2D may be primary care physicians, or PCPs, or other referring medical professionals, such as nurse practitioners or physician assistants, who commonly see patients who have, or who are at risk of developing, T2D. We believe that education of PCPs, and other medical professionals caring for patients with metabolic diseases, about the clinical merits and patient benefits of the Revita DMR Procedure and our Rejuva gene therapy candidates is an important element of the adoption and market acceptance of our product candidates. If we fail to educate PCPs and other medical professionals, or if we educate them but they disagree with the clinical merits, patient benefits and ease-of-use of the DMR procedure using Revita and/or our Rejuva gene therapy candidates, or do not modify their current referral pattern to refer T2D and/or obesity patients to diabetologists, gastroenterologists and interventional endoscopists to perform the DMR procedure using Revita, our ability to achieve our projected revenues may be impaired.
The training required for endoscopists to use Revita could reduce the market acceptance of our products.
As with any new method or technique, endoscopists must undergo a training program before they are qualified to perform DMR procedure using Revita and administer our Rejuva gene therapy candidates. Endoscopists may not achieve the technical competency necessary to perform the procedure. We could also experience difficulty in meeting expected levels of endoscopists’ completing our training program. This could happen due to there being less demand than expected, the length of time necessary to train each endoscopist being longer than we anticipate and/or the capacity of our future sales representatives to train endoscopists being lower than expected.
We have never commercialized a product candidate before and may lack the necessary expertise, personnel and resources to successfully commercialize any products on our own or together with suitable collaborators.
We have never commercialized a product candidate, and we currently have no sales force, marketing or distribution capabilities. We will have to develop our own sales, marketing and supply organization or outsource these
89
Table of Contents
activities to a third party to commercialize our products. If we decide to license our product candidate to others, we may need to rely on the marketing assistance and guidance of those collaborators.
Factors that may affect our ability to commercialize our product candidates on our own include recruiting and retaining adequate numbers of effective sales and marketing personnel, obtaining access to or persuading adequate numbers of physicians to prescribe our product candidates and other unforeseen costs associated with creating an independent sales and marketing organization. Developing a sales and marketing organization will be expensive and time-consuming and could delay the launch of our product candidates. We may not be able to build an effective sales and marketing organization. If we are unable to build our own distribution and marketing capabilities or to find suitable partners for the commercialization of our product candidates, we may not generate revenues from them or be able to reach or sustain profitability.
The medical device, diabetes management and biopharmaceutical markets are highly competitive. We face significant competition, and if our competitors develop and market technologies or products more rapidly than we do or that are more effective, safer or less expensive than the product candidates we develop, our commercial opportunities will be negatively impacted.
If our device product candidates receive marketing authorization or are cleared, approved or certified by regulatory authorities or notified bodies, when we commercialize our products we will compete with commercial medical device and diabetes management companies that offer a wider variety of products, services and procedures within the diabetic care categories. Some of these product offerings include: lifestyle and diet services, pharmaceuticals, and bariatric surgeries, in particular gastric bypass surgeries. Most of our expected competitors are either publicly traded or are divisions of publicly traded companies and have a number of competitive advantages over us, including:
•
greater name and brand recognition, and financial and human-capital resources;
•
longer commercial histories and better-established, broader operations and product lines and pipelines;
•
larger sales forces and more established distribution networks;
•
greater experience in conducting research and development, manufacturing, clinical studies, preparing regulatory submissions and obtaining regulatory clearance, approval or certification for product candidates;
•
substantial intellectual property portfolios;
•
larger and better-established customer bases and more extensive relationships with physicians, including diabetologists and endoscopists, providing them with more opportunities to interact with stakeholders involved in purchasing decisions; and
•
better-established, larger-scale and lower-cost manufacturing capabilities and supplier relationships.
We believe that the principal competitive factors in our target markets include:
•
safety and impact of products and procedures on the health of the patient;
•
acceptance by diabetologists, endoscopists, endocrinologists, PCPs and other healthcare providers;
•
reputation among physicians, hospitals and other healthcare providers;
•
effectiveness, ease-of-use and reliability of the Revita DMR Procedure;
•
capital and per-procedure economics of the DMR procedure using Revita;
•
capital and per-treatment economics of our Rejuva gene therapy candidates;
•
ability to implement a consumables-based model for product candidates;
90
Table of Contents
•
innovation in product candidate offerings;
•
effective manufacturing, sales, marketing and distribution channels; and
•
technical superiority of the Revita DMR Procedure in comparison to current treatment options.
We cannot assure you that we will effectively compete or that we will be successful in the face of increasing competition from existing and new products and technologies introduced by competitors, including pharmaceutical therapies to treat the same metabolic diseases as those targeted by our product candidates. We cannot assure you that our future competitors do not have or will not develop products or technologies that enable them to produce competitive products with greater capabilities or at lower costs than our product candidates. Any failure to compete effectively could materially and adversely affect our business, financial condition and operating results.
In addition, the biotechnology and biopharmaceutical industries are characterized by rapidly advancing technologies, intense competition and a strong emphasis on proprietary and novel products and product candidates. Our competitors have developed, are developing or may develop products, product candidates and processes competitive with our product candidates. Any product candidates that we successfully develop and commercialize, such as our Rejuva gene therapy candidates, will compete with existing therapies and new therapies that may become available in the future. We believe that a significant number of products are currently under development, and may become commercially available in the future, for the treatment of conditions for which we may attempt to develop product candidates.
In particular, there is intense competition in the field of gene therapy we are pursuing. We have competitors both in the United States and internationally, including major multinational biopharmaceutical companies, established biotechnology companies, specialty biopharmaceutical companies, emerging and start-up companies, universities and other research institutions. We also compete with these organizations to recruit management, scientists and clinical development personnel, which could negatively affect our level of expertise and our ability to execute our business plan. We will also face competition in establishing clinical study sites, enrolling subjects for clinical studies and in identifying and in-licensing new product candidates.
We have chosen to initially address a well-validated biochemical target, and therefore expect to face competition from existing products and products in development for each of our product candidates. There are a large number of companies developing or marketing gene therapies, including many major pharmaceutical and biotechnology companies. Many of these current and potential competitors have significantly greater financial, manufacturing, marketing, drug development, technical and human resources and commercial expertise than we do. Large pharmaceutical and biotechnology companies, in particular, have extensive experience in clinical testing, obtaining regulatory approvals, recruiting patients and manufacturing biotechnology products. These companies also have significantly greater research and marketing capabilities than we do and may also have products that have been approved or are in late stages of development, and collaborative arrangements in our target markets with leading companies and research institutions. Established biopharmaceutical and biotechnology companies may also invest heavily to accelerate discovery and development of novel compounds or to in-license novel compounds that could make the product candidates that we develop obsolete. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies, as well as in acquiring technologies complementary to, or necessary for, our programs. As a result, our competitors may succeed in obtaining approval from the FDA or other comparable foreign regulatory authorities or in discovering, developing and commercializing products in our field before we do.
Our commercial opportunity could be reduced or eliminated if our competitors develop and commercialize products that are safer, more effective, have fewer or less severe effects, are more convenient, have a broader label, are marketed more effectively, are reimbursed or are less expensive than any products that we may develop. Our competitors also may obtain marketing approval from the FDA or other comparable foreign regulatory authorities for their products more rapidly than we may obtain approval for ours, which could result in our competitors establishing a strong market position before we are able to enter the market. Even if the product candidates we develop achieve marketing approval, they may be priced at a significant premium over competitive products if any have been approved by then, resulting in reduced competitiveness. Technological advances or products developed by our competitors may render our technologies or product candidates obsolete, less competitive or not economical. If we are unable to compete effectively, our opportunity to generate revenue from the sale of our products we may develop, if approved, could be adversely affected.
91
Table of Contents
We may not be able to develop new product candidates or enhance the capabilities of our existing product candidates to keep pace with our industry’s rapidly changing technology and customer requirements, which could have a material adverse impact on our revenue, results of operations and business.
Our industry is characterized by rapid technological changes, frequent new product introductions and enhancements and evolving industry standards. Our success depends on our ability to develop new product candidates and applications for our technology in new markets that develop as a result of technological and scientific advances, while improving the performance and cost-effectiveness of our existing product candidates. New technologies, techniques or products could emerge that might offer better combinations of price and performance than the products and systems that we plan to sell. Existing markets for our intended product candidates are characterized by rapid technological change and innovation. It is critical to our success that we anticipate changes in technology and customer requirements and physician, hospital and healthcare provider practices and successfully introduce new, enhanced and competitive technologies to meet our prospective customers’ needs on a timely and cost-effective basis. At the same time, however, we must carefully manage our introduction of new product candidates. If potential customers believe that such product candidates will offer enhanced features or be sold for a more attractive price, they may delay purchases until such product candidates are available. We may also have excess or obsolete inventory of older products as we transition to new product candidates, and we have no experience in managing product transitions. If we do not successfully innovate and introduce new technology into our anticipated product lines or manage the transitions of our technology to new product offerings, our revenue, results of operations and business will be adversely impacted.
Competitors may be able to respond more quickly and effectively than we can to new or changing opportunities, technologies, standards or customer requirements. We anticipate that we will face strong competition in the future as expected competitors develop new or improved products and as new companies enter the market with new technologies.
If the market opportunity for any product candidate that we develop is smaller than we believe, our revenue may be adversely affected and our business may suffer.
Our projections of addressable patient populations that may benefit from treatment with our product candidates are based on our estimates. These estimates, which have been derived from a variety of sources, including scientific literature, surveys of clinics, patient foundations and market research, may prove to be incorrect. Further, our internal estimates are based in large part on current patterns of treatment selection by diabetologists. Additionally, the potentially addressable patient population for our product candidates may not ultimately be amenable to treatment with our product candidates. Our market opportunity may also be limited by future competitor treatments that enter the market. If any of our estimates prove to be inaccurate, the market opportunity for any product candidate that we develop could be significantly diminished and have an adverse material impact on our business.
If the quality of our product candidates does not meet the expectations of diabetologists, gastroenterologists, interventional endoscopists, endocrinologists, PCPs or other referring physicians, or patients, then our brand and reputation could suffer and our business could be adversely impacted.
In the course of conducting our business, we must adequately address quality issues that may arise with our product candidates, as well as defects in third-party components included in our product candidates. Although we have established internal procedures to detect and address quality issues, there can be no assurance that we will be able to eliminate or mitigate risks that may arise from these issues. If the quality of our product candidates does not meet the expectations of diabetologists, gastroenterologists, interventional endoscopists, endocrinologists, PCPs or other referring physicians, or patients, then our brand and reputation could suffer, and our business could be adversely impacted.
Our sales cycle will be lengthy and variable, which makes it difficult for us to forecast revenue and other operating results.
If Revita is approved, we expect that our sales process will involve numerous interactions with multiple individuals within an organization and will often include in-depth analysis by potential customers of our products, performance of proof-of-concept studies, preparation of extensive documentation and a lengthy review process. As a result of these factors and the budget cycles of our potential customers, the time from initial contact with a customer to our receipt of a purchase order will vary significantly and could be up to 12 months or longer. Given the length and uncertainty of our anticipated sales cycle, we likely will experience fluctuations in our product sales on a period-to-period basis. Expected revenue streams are highly dependent on adoption of our consumables-based business model, and we cannot assure you that our potential clients will follow a consistent purchasing pattern. Moreover, it is difficult for us to forecast our revenue
92
Table of Contents
from product candidates that are not yet approved for commercialization, as such revenue is dependent upon our ability to establish, and then convince the medical community and third-party payors of, the clinical utility and economic benefits of our product candidates.
Third-party payors may choose not to cover the DMR procedure using Revita or they may require extensive and/or independently performed clinical studies prior to covering or maintaining coverage of the DMR procedure using Revita.
Our success depends on the medical and third-party payor communities’ acceptance of our product candidates as tools and/or therapies that are useful to diabetologists, gastroenterologists and interventional endoscopists in treating patients with T2D and other metabolic diseases. The safety and effectiveness of the Revita DMR Procedure and our Rejuva gene therapy candidates have not been established, and we cannot assure you that any data that we or others generate will be consistent with the preclinical and clinical studies we have completed, or those we intend to complete. Even if our clinical studies demonstrate safety and effectiveness sufficient to gain regulatory approval for Revita or our Rejuva gene therapy candidates, certain diabetologists, gastroenterologists, interventional endoscopists, hospitals, ambulatory surgery centers and third-party payors may not find data from our clinical studies compelling or may prefer to see longer-term effectiveness data before adopting or covering the DMR procedure using Revita and/or our Rejuva gene therapy candidates. If providers do not adopt or third-party payors do not provide coverage for the DMR procedure using Revita and/or our Rejuva gene therapy candidates, our business will be materially and adversely affected.
We depend on our information technology systems, and any failure of these systems could harm our business.
We depend on information technology systems for significant elements of our operations, including the storage of data and retrieval of critical business information. We have installed, and expect to expand, a number of enterprise software systems that affect a broad range of business processes and functional areas, including systems handling human resources, financial controls and reporting, contract management, regulatory compliance and other infrastructure operations. These information technology systems may support a variety of functions, including storage of clinical data, laboratory operations, test validation, quality control, customer service support, billing and reimbursement, research and development activities and general administrative activities.
Information technology systems are vulnerable to damage from a variety of sources, including network failures, malicious or accidental human acts and natural disasters. Despite network security and back-up measures, some of our servers are potentially vulnerable to physical or electronic break-ins, computer viruses and similar disruptive problems. Failures or significant downtime of our information technology systems or those used by our third-party service providers could prevent us from conducting our general business operations. Any disruption or loss of information technology systems on which critical aspects of our operations depend could have an adverse effect on our business. Further, we store highly confidential information on our information technology systems, including information related to clinical data, product designs and plans to create new products. If our systems are compromised by a physical or electronic break-in, computer virus or other malicious or accidental human action, our confidential information could be compromised, stolen or destroyed.
Negative public opinion and increased regulatory scrutiny of gene therapy may damage public perception of the safety of our Rejuva gene therapy candidates, and any of our potential future gene therapy candidates, and adversely affect our ability to conduct our business or obtain regulatory approvals for our Rejuva gene therapy candidates.
Our Rejuva PGTx candidate involves introducing genetic material into a patient’s pancreas via endoscopic administration. Gene therapy remains a novel technology, with only a limited number of gene therapy approved to date. Public perception may be influenced by claims that gene therapy is unsafe, and gene therapy may not gain the acceptance of the public or the medical community. In particular, our success will depend upon physicians who specialize in the treatment of metabolic diseases targeted by our current or future gene therapy candidates, prescribing treatments that involve the use of our current or future gene therapy candidates in lieu of, or in addition to, existing treatments with which they are familiar and for which greater clinical data may be available. More restrictive government regulations or negative public opinion would have an adverse effect on our business, financial condition, results of operations and prospects and may delay or impair the development, commercialization or demand of our current and future gene therapy candidates we develop. Potential serious adverse events in our clinical studies, or other clinical studies involving gene therapy or our competitors’ products, even if not ultimately attributable to the relevant product candidates, and the resulting publicity, could result in increased government regulation, unfavorable public perception, potential regulatory delays in the testing or approval of our
93
Table of Contents
current and future gene therapy candidates, stricter labeling requirements for those product candidates that are approved and a decrease in demand for any such product candidates.
Risks Relating to Our Dependence on Third Parties
We substantially rely, and expect to continue to rely, on third parties, including independent clinical investigators and CROs, to conduct certain aspects of our preclinical studies, and clinical studies. If these third parties do not successfully carry out their contractual duties, comply with applicable regulatory requirements or meet expected deadlines, we may not be able to obtain marketing authorization of or commercialize our product candidates and our business could be substantially harmed.
We substantially rely, and expect to continue to rely, on third parties, including independent clinical investigators and third-party CROs, to conduct certain aspects of our preclinical studies and to monitor and manage data for our ongoing preclinical programs. We rely on these parties for execution of our preclinical and clinical studies, and control only certain aspects of their activities. Nevertheless, we are responsible for ensuring that each of our studies and studies is conducted in accordance with the applicable protocol, legal, regulatory and scientific standards, and our reliance on these third parties does not relieve us of our regulatory responsibilities. We, our third-party contractors and CROs are required to comply with GCP requirements, which are regulations and guidelines enforced by the FDA and comparable foreign regulatory authorities for all of our products candidates in clinical development. Regulatory authorities enforce these GCPs through periodic inspections of study sponsors, principal investigators and study sites. If we or any of these third parties or our CROs fail to comply with applicable GCPs, the clinical data generated in our clinical studies may be deemed unreliable and the FDA or comparable foreign regulatory authorities may require us to perform additional clinical studies before approving our marketing applications. We cannot assure you that upon inspection by a given regulatory authority, such regulatory authority will determine that any of our clinical studies comply with GCP regulations. In addition, our clinical studies must be conducted with product produced under cGMP or similar foreign regulations. Our failure to comply with these regulations may require us to repeat clinical studies, which would delay the regulatory approval process. Moreover, our business may be adversely affected if any of these third parties violates federal or state fraud and abuse or false claims laws and regulations.
In addition, the FDA or comparable foreign regulatory authority may conclude that our financial relationships with principal investigators, some of whom we engage as consultants, have created a conflict of interest or otherwise affected interpretation of the study. The FDA or comparable foreign regulatory authority may therefore question the integrity of the data generated at the applicable clinical study site and the utility of the clinical study itself may be jeopardized. This could result in a delay in approval, or rejection, of our marketing applications by the FDA or comparable foreign regulatory authority, as the case may be, and may ultimately lead to the denial of marketing approval of one or more of our product candidates.
Further, there is no guarantee that any such CROs, investigators or other third parties on which we rely will devote adequate time and resources to our development activities or perform as contractually required. These third parties may also have relationships with other commercial entities, including our competitors, for whom they may also be conducting clinical studies or other product development activities, which could affect their performance on our behalf. If independent investigators or CROs fail to devote sufficient resources to the development of our product candidates, or if CROs do not successfully carry out their contractual duties or obligations or meet expected deadlines, if they need to be replaced or if the quality or accuracy of the clinical data they obtain is compromised due to the failure to adhere to our clinical protocols, regulatory requirements or for other reasons, our clinical studies may be extended, delayed or terminated and we may not be able to obtain regulatory approval for or successfully commercialize our product candidates. As a result, our results of operations and the commercial prospects for our product candidates would be harmed, our costs could increase and our ability to generate revenues could be delayed or precluded entirely.
Our CROs have the right to terminate their respective agreements with us in the event of an uncured material breach. In addition, some of our CROs have an ability to terminate their respective agreements with us if it can be reasonably demonstrated that the safety of the subjects participating in our clinical studies warrants such termination, if we make a general assignment for the benefit of our creditors or if we are liquidated.
If any of our relationships with these third-party CROs terminate, we may not be able to enter into arrangements with alternative CROs or to do so on commercially reasonable terms. Switching or adding additional CROs involves additional cost and requires management time and focus. In addition, there is a natural transition period when a new CRO commences work. As a result, delays occur, which can materially impact our ability to meet our desired clinical
94
Table of Contents
development timelines. Additionally, CROs may lack the capacity to absorb higher workloads or take on additional capacity to support our needs. Though we carefully manage our relationships with our CROs, there can be no assurance that we will not encounter similar challenges or delays in the future or that these delays or challenges will not have a material adverse impact on our business, financial condition and prospects.
If we decide to establish new collaborations in the future, but are not able to establish those collaborations on commercially reasonable terms, we may have to alter our development and commercialization plans.
Our development programs and the potential commercialization of our product candidates will require substantial additional cash to fund expenses. We may seek to selectively form collaborations to expand our capabilities, potentially accelerate research and development activities and provide for commercialization activities by third parties. Any of these relationships may require us to incur non-recurring and other charges, increase our near and long-term expenditures, issue securities that dilute our existing stockholders, or disrupt our management and business.
We may face significant competition in seeking appropriate collaborators and the related negotiation process is time-consuming and complex. Whether we reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed collaborator’s evaluation of a number of factors. Those factors may include the design or results of clinical studies, the likelihood of approval by the FDA or comparable foreign regulatory authorities, the potential market for the subject product candidate, the costs and complexities of manufacturing and delivering such product candidate to patients, the potential of competing drugs, the existence of uncertainty with respect to our ownership of intellectual property and industry and market conditions generally. The potential collaborator may also consider alternative product candidates or technologies for similar indications that may be available to collaborate on and whether such collaboration could be more attractive than the one with us for our product candidate. Further, we may not be successful in our efforts to establish a collaboration or other alternative arrangements for future product candidates because they may be deemed to be at too early of a stage of development for collaborative effort and third parties may not view them as having the requisite potential to demonstrate safety and efficacy.
In addition, there have been a significant number of recent business combinations among large companies in our industry that have resulted in a reduced number of potential future collaborators. Even if we are successful in entering into a collaboration, the terms and conditions of that collaboration may restrict us from entering into future agreements on certain terms with potential collaborators.
If and when we seek to enter into collaborations, we may not be able to negotiate collaborations on a timely basis, on acceptable terms, or at all. If we are unable to do so, we may have to curtail the development of a product candidate, reduce or delay its development program or one or more of our other development programs, delay its potential commercialization or reduce the scope of any sales or marketing activities, or increase our expenditures and undertake development or commercialization activities at our own expense. If we elect to increase our expenditures to fund development or commercialization activities on our own, we may need to obtain additional capital, which may not be available to us on acceptable terms or at all. If we do not have sufficient funds, we may not be able to further develop our product candidates or bring them to market and generate product revenue.
We may enter into collaborations in the future with third parties for the development and commercialization of product candidates. If those collaborations are not successful, we may not be able to capitalize on the market potential of these product candidates.