guer20251231_10k.htm
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549
FORM 10-K
For the fiscal year ended December 31, 2025
OR
Commission file number: 000-56238
GUERRILLA RF, INC.
(Exact name of registrant as specified in its charter)
2000 Pisgah Church Road, Greensboro, North Carolina 27455
(Address of principal executive offices) (Zip code)
Registrant’s telephone number, including area code: (336) 510-7840
Securities registered pursuant to Section 12(b) of the Act: None
Securities registered pursuant to Section 12(g) of the Act: Common Stock, $0.0001 par value per share
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐
Indicate by check mark whether the Registrant has submitted electronically; every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.0405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐
If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒
The aggregate value of the registrant's common stock as of June 30, 2025 held by those persons deemed by the registrant to be non-affiliates was approximately $6,493,564. For the purposes of the foregoing calculation only, all directors, executive officers, and 10% shareholders of the registrant are deemed to be 'affiliates.' As of March 24, 2026, there were 10,642,735 shares of the registrant's common stock issued and outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant’s proxy statement to be filed pursuant to Regulation 14A are incorporated herein by reference into Part III.
Table of Contents
true
TABLE OF CONTENTS
Page
PART I
Item 1. Business 1
Item 1A. Risk Factors 10
Item 1B. Unresolved Staff Comments 37
Item 1C. Cybersecurity 37
Item 2. Properties 38
Item 3. Legal Proceedings 38
Item 4. Mine Safety Disclosures 38
PART II
Item 6. Reserved 40
Item 7A. Quantitative and Qualitative Disclosures About Market Risk 47
Item 8. Consolidated Financial Statements and Supplementary Data 48
Item 9A. Controls and Procedures 77
Item 9B. Other Information 78
Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 78
PART III
Item 10. Directors, Executive Officers and Corporate Governance 79
Item 11. Executive Compensation 79
Item 14. Principal Accounting Fees and Services 80
PART IV
Item 15. Exhibits and Consolidated Financial Statement Schedules 80
i
Table of Contents
GLOSSARY OF TERMS AND ABBREVIATIONS
The following is a glossary of technical terms used in this Report:
64T64R, 32T32R, 16T16R, 8T8R systems — Describes the number of transmit and receive paths in a 5G system architecture.
5G — A technology standard to increase the speed or amount of data communicated in a cellular network relative to 3G or LTE networks.
AEC-Q100 — Automotive Electronic Council’s electronic stress qualification standard for integrated circuits.
Cellular booster/DAS — System which extends and distributes a cellular signal within buildings such as below-ground, large-area, or high-rise structures.
Cellular Compensator — Improves a cellular link inside a motorized vehicle by using an antenna outside the vehicle in combination with amplifiers to boost the signal in both the transmit and receive paths.
Cellular Repeater — Improves poor cellular service by boosting signal strength inside a building or structure.
C-V2X — Cellular-technology-based vehicle-to-everything communication standard.
CMOS — Complementary MOS (metal oxide semiconductor), widely used semiconductor transistor architecture.
Copper lead frame — Copper-based substrate used as a foundation for semiconductor packages.
DAB — Digital audio broadcasting. A terrestrial-based digital radio standard (HD Radio).
Design win — Acknowledgment by an end-user customer that a product has been chosen or finalized for use in the customer’s system or application.
Die/Chip — An individual semiconductor device on the wafer.
Distribution-customer — A customer that purchases Guerrilla RF products to sell to a third-party rather than for its own use.
DSA — Digital step attenuator.
DSRC — Dedicated short-range communications. (Typically used in electronic toll collection).
End-usercustomer — The ultimate customer that utilizes or incorporates our products into its own products or solutions whether it purchased our products directly from Guerrilla RF or a third party.
EAR — Export Administration Regulation.
Fab — Fabrication, generally refers to a semiconductor wafer fabrication facility.
Fabless — Semiconductor company that utilizes pure-play or outsourced wafer fabrication partners rather than owning and operating their own wafer foundry.
FM/DAB — Terrestrial-based radio broadcast standards.
GaN — Gallium nitride semiconductor process used in high-power amplifier applications.
GaAs HBT — Gallium arsenide heterojunction bipolar transistor. A semiconductor process allowing higher efficiency and improved linearity compared to GaAs MESFET processes.
GaAs pHEMT — Gallium Arsenide pseudomorphic high electron mobility transistor. A semiconductor process that allows larger bandgap differences, thus providing higher performance than a GaAs MESFET technology.
Gain blocks, switches, power detectors, drivers, mixers, digital step attenuators, high power amplifiers — Functional building blocks of RF components in a typical radio frequency system or architecture.
GHz — Frequency of operation (in Gigahertz) in an RF system.
GPS/GNSS — Global satellite positioning technologies.
IP — Intellectual property.
LNA — Low noise amplifier.
Linear driver amplifier — An amplifier used before the final amplification stage that produces increased power levels while adding minimal distortion to the output signal.
mMIMO active antenna array — Massive multiple-input and multiple-output antenna systems that include beamforming ability.
MMIC — Monolithic microwave integrated circuit. An integrated circuit designed to utilize microwave frequency bands. (300MHz to 300GHz).
MESFET — Metal-semiconductor field-effect transistor, a type of transistor.
OEM — Original equipment manufacturers.
PA — Power Amplifier.
Package lead frame — Substrate (typically copper) used as a foundation to mount and package semiconductor devices.
pHEMT — Pseudomorphic high electron mobility transistor, a type of transistor.
Point-to-pointradio — Radio link used between two communication endpoints or devices.
RF — Radio frequency.
RFIC — Radio frequency integrated circuit.
RFID — Radio frequency identification.
SDARS — Satellite Digital Audio Radio Service (e.g., Sirius XM Satellite Radio).
Si — Silicon — Standard fabrication process used for semiconductor processing.
SOI — Silicon on insulator. Fabrication process used for semiconductor manufacturing. This process choice is beneficial to reduce parasitic capacitance for a device.
Tape and reel — A method of packing surface mount devices by placing each device in an individual pocket on a carrier tape. Clear tape is applied to contain the device within the pocket. The carrier tape is wound on a reel, easing device handling and transportation.
Telematics — The convergence of telecommunications and information processing. The term is generally used for describing systems used in motor vehicles.
UWB — Ultra-wideband Radio technology using very low energy levels for short-range, high-bandwidth communications.
V2X — Vehicle-to-everything. Communication technology to allow vehicles to communicate with other vehicles, infrastructure, pedestrian devices, etc.
Wafer — Thin slice of semiconductor material used as the substrate for building electronic circuits. Wafers are the output from the semiconductor foundry process before the assembly/packaging processes.
WiFi — Wireless network protocol, based on the IEEE 802.11 family of standards.
Wireless backhaulpoint-to-point — A method used by communication providers to use wireless data links to connect radio towers or the core network.
Wireless infrastructure — Systems designed or used by network operators or other professionals to ensure strong communication links to consumers or customers.
ii
Table of Contents
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K ("Annual Report"), including the exhibits hereto and the information incorporated by reference herein, sections entitled “Risk Factors”, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business”, includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), which are subject to risks and uncertainties. Information regarding activities, events, and developments that we expect or anticipate will or may occur in the future, including, but not limited to, information relating to our future growth and profitability targets and strategies designed to increase total shareholder value, are forward-looking statements based on management’s estimates, assumptions and projections. Forward-looking statements also include, but are not limited to, statements regarding our future economic and financial condition and results of operations, the plans and objectives of management and our assumptions regarding our performance and such plans and objectives, as well as the amount and timing of other uses of cash flows. Forward-looking statements generally can be identified through the use of words such as “guidance,” "believe,” “could,” “potential,” “continue,” “outlook,” “project,” “believe,” “target,” “predict,” “estimate,” “forecast,” “strategy,” “may,” “goal,” “expect,” “anticipate,” “intend,” “plan,” “foresee,” “likely,” “will,” “should” and other similar expressions that do not relate solely to historical matters. Forward-looking statements are based on management’s beliefs and assumptions and on information currently available to management. Although we believe that the expectations reflected in forward-looking statements are reasonable, such statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance, or achievements to be materially different from any future results, performance, or achievements expressed or implied by forward-looking statements.
Forward-looking statements contained in this Annual Report are predictions only, and actual results could differ materially from management’s expectations due to a variety of factors, including those described below. All forward-looking statements are expressly qualified in their entirety by such risk factors.
The forward-looking statements that we make in this Annual Report are based on management’s current views and assumptions regarding future events and speak only as of their dates. We disclaim any obligation to update developments of these risk factors or to announce publicly any revisions to any of the forward-looking statements that we make, or to make corrections to reflect future events or developments, except as required by the federal securities laws.
Forward-looking statements include, but are not limited to, statements about:
● we may not be able to generate sufficient cash to service all of our debt or meet our operating needs;
● we may not be able to achieve profitability or raise sufficient equity capital to support our operating needs and fund our strategic plans;
● our ability to maintain effective internal controls over financial reporting, and our ability to timely and accurately report our financial results;
● those relating to fluctuations in our operating results;
● our dependence on developing new products, achieving design wins, and several large customers for a substantial portion of our revenue;
● a loss of revenue if purchase contracts are canceled or delayed;
● our dependence on third parties such as suppliers, product manufacturers, and product assemblers and testers;
● risks related to sales through independent sales representatives and distributors;
● risks associated with the operation of our third-party manufacturing providers;
● anticipated trends, growth rates, and challenges in our business and in the markets in which we operate;
● our ability to further penetrate our existing customer base;
● our estimates regarding future revenues, capital requirements, general and administrative expenses, sales and marketing expenses, research and development expenses, and our need for or ability to obtain additional financing to fund our operations;
● developments and projections relating to our competitors and our industry, including semiconductor availability, which has affected the automotive industry, impacting vehicle production and thereby demand irregularities for our business;
● business disruptions;
● poor manufacturing yields;
● increased inventory risks and costs due to the timing of customer forecasts;
● our ability to continue to innovate in a very competitive industry;
● unfavorable changes in interest rates, pricing of certain precious metals, utility rates, and shipping and freight costs;
● our strategic investments failing to achieve financial or strategic objectives; and,
● our ability to attract, retain, and motivate key employees.
iii
Table of Contents
● warranty claims, product recalls, and product liability;
● changes in our effective tax rate and the enactment of international or domestic tax legislation, or changes in regulatory guidance;
● risks associated with environmental, health and safety regulations, and climate change;
● risks from international sales and third-party vendor operations;
● the impact of, and our expectations regarding, changes in current and future laws and regulations;
● changes in government trade policies, including the imposition of tariffs and export restrictions;
● our ability to protect and enforce our intellectual property protection and the scope and duration of such protection;
● claims of infringement of third-party intellectual property rights;
● security breaches and other similar disruptions compromising our information;
● theft, loss, or misuse of personal data by or about our employees, customers, or third parties;
● provisions in our governing documents and Delaware law may discourage takeovers and business combinations that our stockholders might consider to be in their best interests; and,
● volatility in the price of our common stock.
We have based these forward-looking statements largely on our current expectations and projections about future events and trends that we believe may affect our financial condition, operating results, business strategy, short-term and long-term business operations and objectives, and financial needs. These forward-looking statements are subject to a number of risks, uncertainties, and assumptions, including those described in the section titled “Risk Factors.” Moreover, we operate in a very competitive and rapidly changing environment. New risks emerge from time to time. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. In light of these risks, uncertainties, and assumptions, the future events and trends discussed in this Annual Report may not occur, and actual results could differ materially and adversely from those anticipated or implied in the forward-looking statements.
You should read this Annual Report and the documents that we reference in this Annual Report as exhibits with the understanding that our actual future results, performance, and events and circumstances may be materially different from what we expect.
iv
Table of Contents
PART I
ITEM 1. BUSINESS
Guerrilla RF, Inc., a fabless semiconductor company based in Greensboro, North Carolina, was founded in 2013, initially as a North Carolina limited liability company before converting to a Delaware corporation. Unless otherwise stated or the context otherwise indicates, references to “Guerrilla RF”, the “Company”, “we”, “our”, “us” or similar terms refer to Guerrilla RF, Inc.
Our common stock is currently quoted on the OTCQX, under the symbol “GUER.”
Our principal executive offices are located at 2000 Pisgah Church Road, Greensboro, North Carolina 27455. Our telephone number is (336) 510-7840. Our website address is www.guerrilla-rf.com. Information contained on, or that can be accessed through, our website is not a part of this Annual Report. All trademarks, service marks, and trade names appearing in this Annual Report are the property of their respective holders. Use or display by us of other parties’ trademarks, trade dress, or products is not intended to, and does not, imply a relationship with, or endorsements or sponsorship of, us by the trademark or trade dress owners.
Overview
Guerrilla RF is a fabless semiconductor company based in Greensboro, NC. Guerrilla RF was founded in 2013 with a mission to employ RF semiconductor technology to deliver RF solutions to customers in underserved markets. Over the past several years, we have become a leader in developing high-performance MMIC products for wireless connectivity. We continue to target underserved markets and customers, delivering a range of high-performance MMIC products and associated technical support to a diverse set of customers that enable a more connected world.
We possess in-house design, applications, sales, and customer support functions as a fabless semiconductor company. We outsource the manufacture and production of our MMIC products to subcontractors, providing access to multiple semiconductor process technologies. Our primary external wafer foundries are located in Taiwan and Singapore, and our primary assembly and test supplier is located in Malaysia. We have also contracted with wafer foundries in the United States of America. We have produced and distributed in excess of 200 million products to over 300 end customers worldwide.
1
Table of Contents
Our Industry
Global demand for ubiquitous, always-on connectivity has increased over the past several years, driving data traffic over wireless and wired networks. We believe that wireless and wired markets are undergoing multi-year technology upgrade cycles to keep pace with this demand.
Cellular operators have been migrating to 5G technology to improve efficiency, increase data throughput, reduce signal latency, and enable massive machine-to-machine connectivity. Because 5G networks operate on different frequencies (low-, mid-, and high-band spectrum) and coexist with prior cellular standards, we believe 5G deployments will increase the content opportunity for Guerrilla RF’s infrastructure RF products. As an example, over the past several years, automakers have added more entertainment and safety features to their automobiles due in part to customer demands and in part due to increased demand for electric vehicles (EV) and an increasing focus on the development of autonomous vehicle technologies. We expect this trend to continue to increase demand for RF semiconductors in modern automobiles. We believe this trend offers a growing content opportunity for Guerrilla RF’s automotive RF products.
The COVID-19 pandemic placed even more demand on the need for contactless and wireless communication in all aspects of human existence. Our technology helps meet that demand and facilitates rapid and contactless communication.
Our Markets
Our business is diversified across the following markets: Wireless Infrastructure, Automotive, and Catalog Markets.
Wireless Infrastructure
The wireless infrastructure market is evolving with the deployment of 5G networks operating across sub-7 GHz and millimeter-wave frequencies. Many of these networks incorporate massive MIMO (mMIMO) active antenna arrays, significantly increasing the number of RF transmit and receive channels. To meet these demands, 5G networks require a diverse portfolio of highly efficient RF solutions that enhance capacity, expand coverage, and maintain a compact form factor.
We support wireless infrastructure OEMs worldwide with a comprehensive portfolio of RF solutions covering all major frequency bands below 7 GHz. Additionally, our Satellite Communication (SatCom) solutions enable seamless connectivity between satellite and cellular infrastructure, enhancing network reach and reliability.
Our expanding product portfolio, which includes a wide range of gain, linearity, and noise figure performance, is well-suited for various demanding applications across the wireless infrastructure market and beyond.
Automotive
Next-generation wireless technologies are driving advancements in automotive connectivity, enabling new use cases such as Vehicle-to-Everything (V2X) communication, which supports direct, high-speed data exchange between vehicles, infrastructure, and other connected devices. These emerging applications demand sophisticated RF solutions capable of operating across multiple protocols, including GPS, satellite radio, DAB, WiFi, 5G (sub-7 GHz), and UWB. As the automotive industry continues to integrate advanced wireless technologies, the need for high-performance, reliable RF components will only continue to grow.
Catalog Markets
Our catalog markets continue to grow as our products find applications in an expanding range of RF systems. These markets, which we collectively refer to as "Catalog Markets," include satellite navigation, cellular repeaters, point-to-point radios, RFID/asset tracking, defense, wireless audio, test and measurement, and other high-performance RF applications.
Our satellite navigation solutions enable precision location tracking for industries such as agriculture, aviation, maritime, mining, and construction. In the cellular repeater and point-to-point radio markets, our products support network densification and expanded coverage, improving connectivity in challenging environments. Additionally, our RF solutions enhance RFID/asset tracking and defense radios by enabling longer battery life and improved signal coverage.
As demand for high-performance RF solutions continues to evolve, our expanding portfolio—featuring a wide range of gain, linearity, and noise figure performance—positions us to serve a growing array of applications across multiple industries.
2
Table of Contents
Our Products
Our portfolio of products has been developed to improve performance, reduce complexity, enable smaller form factors, and solve other critical RF challenges.
Wireless Infrastructure
Our solutions for satellite communications (SatCom) and massive MIMO (mMIMO) systems include low-noise amplifiers (LNAs), linear driver amplifiers, digital step attenuators, and discrete power amplifiers (PAs) for both point-to-point and multipoint applications. Additionally, we have developed gallium nitride (“GaN”) amplifier modules and are actively expanding our wireless infrastructure product portfolio to meet the evolving demands of the industry.
Automotive
We offer a comprehensive range of automotive RF connectivity solutions, including low-noise amplifiers (LNAs), linear driver amplifiers, switches, power amplifiers (PAs), and front-end modules. Designed to meet or exceed AEC-Q101 quality and reliability standards, our products support the stringent requirements of the automotive industry. We supply these high-performance solutions to automotive OEMs, tier-1 suppliers, and chipset vendors, enabling advanced connectivity in modern vehicle systems.
Catalog Markets
We supply a diverse range of standard RF catalog components to multiple markets. Our products' unique combination of low noise, broad bandwidth, and high linearity makes them well-suited for various applications, including wireless audio equipment, defense and first responder two-way radios, test and measurement equipment, cellular repeaters, and wireless backhaul point-to-point links. Additionally, our technology is widely used in RFID (Radio Frequency Identification), IoT (Internet of Things), Satellite Communication (SatCom), GPS (Global Positioning System), and ISM (Industrial, Scientific, and Medical) broadband applications, where high performance and reliability are critical.
Our Operations
Research and Development
Since our inception, we have focused on under-served markets by providing industry-leading performance in discrete and integrated RF devices including ultra-low noise amplifiers (Ultra-LNAs), gain blocks, drivers, PAs, switches, mixers, power detectors, digital step attenuators, and infrastructure-class high power amplifiers.
3
Table of Contents
We invest in research and development ("R&D") to develop products necessary to serve our target markets. Our R&D activities typically support competitive design win opportunities for significant programs at key customers, which require best-in-class performance, size, cost, and functional density. We also invest in R&D to develop new products for broader market applications. Our R&D efforts require us to focus on continuous improvement and innovation in fundamental areas, including software, simulation and modeling, systems architecture, circuit design, device packaging, module integration, and test-related materials and designs.
As a fabless semiconductor company, we utilize our wafer foundry manufacturing suppliers’ GaAs, GaN, and SOI CMOS process technologies. We combine these technologies with proprietary design methods, IP, and applications engineering expertise to improve performance, increase integration and reduce the size and cost of our products.
We work with our package and test suppliers to develop and qualify advanced packaging technologies to reduce component size, improve performance and reduce package costs. Our manufacturing partners’ capabilities enable us to bring these technologies to market in high volumes. R&D expenses totaled $8.6 million for the year ended December 31, 2025, and $9.7 million for the year ended December 31, 2024. R&D activities in 2025 focused on developing and releasing 20 new products to bring our product catalog to a total of 183 products at the end of 2025.
Raw Materials
We utilize an outsourced manufacturing model, and our manufacturing suppliers purchase raw materials to support our requirements. Our suppliers typically use industry-standard raw materials, which reduces supply chain risk. In addition, we purchase passive components for use in modules that include tuning components.
We collaborate with global manufacturing partners to produce our products, leveraging international expertise and resources to enhance operational efficiency. However, our global supply chain is subject to various challenges that may impact the availability of raw materials, including trade restrictions, tariffs, and supply-demand imbalances.
Geopolitical tensions and policy changes could result in international trade restrictions, potentially limiting access to critical components or materials. To mitigate these risks, we work closely with our manufacturing partners to establish long-term strategic relationships that enhance supply chain resilience. These partnerships allow us to forecast product needs, maintain adequate manufacturing capacity, and ensure continuity in raw material availability. Additionally, we regularly evaluate and expand our supplier base, redesign products to incorporate alternative raw materials, qualify multiple wafer foundries, and extend or add supply commitments to increase flexibility within our supply chain.
The potential imposition of tariffs on imported goods presents another challenge, as it can increase costs and disrupt established supply chains. These additional costs may impact the availability and pricing of essential raw materials, requiring us to proactively manage sourcing strategies to mitigate financial and operational risks.
Furthermore, global supply-demand imbalances could lead to raw material shortages, particularly when demand outpaces available supply. These fluctuations may affect production schedules and overall manufacturing efficiency.
In anticipation of these potential challenges, we are committed to closely monitoring global supply chain dynamics and proactively working with our manufacturing partners to ensure stability. By maintaining strong supplier relationships, diversifying sourcing strategies, and implementing contingency plans, we have and continue to take steps to mitigate potential disruptions and sustain long-term operational success.
4
Table of Contents
Manufacturing
We believe that our outsourced manufacturing strategy allows us to identify the optimum semiconductor process technology for each product while ensuring we pay competitive prices for manufacturing services. Our manufacturing suppliers are located in East Asia and the United States of America. We qualify additional manufacturing sites and sources of supply to reduce the risk of supply interruptions or price increases, and we closely monitor our suppliers’ key performance indicators. In addition, we seek to ensure that materials and manufacturing services are available from multiple sources. Our product manufacturing comprises a two-step process: (i) wafer fabrication; and (ii) packaging. Wafers are produced in wafer foundries by subcontractors and shipped to our assembly subcontractors for packaging. Most of our products are manufactured by placing die on a copper lead frame. We use bond wires to connect terminals on the package to the appropriate pads on the die. Material composition and wire length significantly affect the performance of the end product. Once a product has completed manufacturing, each device is RF-tested to ensure it meets published specifications. We transfer compliant devices to tape and reel -- the generally accepted method customers use in their downstream manufacturing processes.
We subcontract with multiple wafer foundries located in Taiwan, Singapore, and the United States of America. We currently utilize GaAs HBT, GaAs pHEMT, SOI, and GaN process technologies.
Manufacturing yields vary significantly based on many factors, including product complexity, performance requirements, and the maturity of the chosen manufacturing processes. To maximize wafer yields and quality, parameters are measured throughout the manufacturing process to ensure the systems are in control and produce the expected outputs. Ongoing reliability monitoring and numerous quality control inspections are also conducted throughout the production flow to ensure that we deliver high-quality products to our customers. Semiconductor fabrication is a specialized field requiring highly controlled and clean environments. As a result, the die on a wafer can become defective due to minute impurities, variances in the fabrication process, or defects in the masks used to transfer circuit patterns onto the wafers.
Our subcontractors’ manufacturing facilities are certified to the ISO 9001 quality standard, and select locations are accredited to additional automotive (IATF 16949) and environmental (ISO 14001) standards. These stringent standards are audited and certified by third-party certification bodies. The ISO 9001 standard is the international standard for creating a quality management system. IATF 16949 is the highest international quality standard for the global automotive industry and incorporates specific additional requirements for the automotive industry. ISO 14001 is an internationally agreed-upon standard for an environmental management system. Many of our key vendors and suppliers are certified to be compliant with these standards.
Our Customers
We design, develop, manufacture, and market products for leading domestic and international original equipment manufacturers and original design manufacturers. We also collaborate with leading reference design partners and design consultants globally.
Our products serve the needs of a wide variety of customers across multiple industries including automotive, infrastructure, SatCom, cellular boosters/DAS, and general catalog components. Within general catalog components our customers purchase our products for various RF applications including wireless audio, RFID, and Internet of Things. The majority of sales are made via independent distributions accounting for 93% of all revenue in 2025 and 96% in 2024.
5
Table of Contents
Governmental Regulation
The semiconductor industry in which we operate is highly regulated, and the products and solutions we provide are subject to a complex set of federal, state, and country-specific laws and regulations. We are also subject to the U.S. Foreign Corrupt Practices Act (“FCPA”), which prohibits improper payments or offers of payments to foreign governments and their officials for the purpose of obtaining or retaining business and requires companies to maintain accurate books and records and a system of internal accounting controls.
Import/Export Controls
Sales to international customers are subject to the U.S. Department of Commerce import/export controls. A license may be required to export a product to a customer depending on the technical capability of the underlying product, the actual end customer purchaser, the known end use of the product, or due to the export country location. Most of the products, services, and technologies that fall within the scope of the Export Administration Regulations are not specifically controlled for export and are classified as “EAR99”.
As of December 31, 2025, none of our products were subject to export licenses and, as such, were classified as EAR99. As such, they fall under the U.S. Department of Commerce's jurisdiction and are not included in the U.S. Department of Commerce’s Control List. We are also required to adhere to the Entity List published by the U.S. Department of Commerce’s Bureau of Industry and Security (https://www.bis.doc.gov/index.php/policy-guidance/lists-of-parties-of-concern/entity-list ).
We are also subject to import/export controls, tariffs, and other trade-related regulations and restrictions in countries where we conduct business. These controls, tariffs, regulations, and restrictions (including those related to, or affected by, United States-China relations, as discussed below) may impact our business, including our ability to sell products and manufacture or source components.
Environmental
Guerrilla RF and our overseas manufacturing subcontractors are subject to various extensive and changing domestic and international federal, state, and local governmental laws, regulations, and ordinances related to the use, storage, discharge, and disposal of toxic, volatile, or otherwise hazardous chemicals used in the manufacturing process.
We monitor our manufacturing subcontractors and their compliance with applicable environmental laws and regulations.
We require that our suppliers certify their compliance with applicable environmental laws and regulations related to hazardous materials used in the manufacturing, assembly, and testing of our products, particularly materials retained in the final product. In addition, we have developed specific restrictions on the content of certain hazardous materials in our products and those of our suppliers and outsourced manufacturers and subcontractors. This practice helps ensure our products are compliant with the requirements of the markets into which we sell our products and with our customers’ needs.
Other Governmental Regulations
Government regulations are subject to change in the future. Accordingly, we cannot assess the possible effect of compliance with future requirements or whether our compliance with such regulations will materially impact our business, results of operations, or financial condition.
6
Table of Contents
Sales and Marketing
We sell our products worldwide through a network of U.S. and foreign sales representative firms and distributors, and directly to customers. We select our domestic and foreign sales representatives based on their technical skills and sales expertise, complementary product lines, and customer bases. In addition, we provide ongoing educational training about our products to our internal and external sales representatives and distributors. We maintain an internal sales and marketing organization responsible for key account management, customer application engineering support, sales, and advertising literature, and technical presentations for industry conferences. Our direct sales personnel are located throughout the world. We handle all our technical customer support out of our headquarters in Greensboro, N.C.
Our website contains extensive product information and includes state-of-the-art parametric search tables that allow engineers to locate products quickly and easily. Customers can learn about our products, and download datasheets, product catalogs, s-parameters, application notes, and many other technical documents from our website. Our team of application engineers interacts with customers during all design and production stages, maintains regular contact with customer engineers, provides product application notes and engineering data, and assists in resolving technical problems. We maintain close relationships with our customers and provide them with technical support to help them anticipate future product needs. We actively seek their input to guide our product roadmaps.
Seasonality
Our sales are generated via standard purchase orders or specific agreements with customers. Historically, we have experienced seasonal fluctuations in the sale of our products driven by our customers' individual demands, oftentimes with the third and fourth quarters of our fiscal year experiencing stronger customer sales demands.
Competition
We operate in competitive environments across all of our markets. Our end-user customers’ product life cycles can be relatively long compared to mobile phones or similar consumer products. For example, wireless infrastructure and automotive market product life cycles can be in the 5-10 year range compared to the 12-18 month range for mobile phones or similar products. Our ability to effectively compete is primarily determined by our ability to innovate with new products, improve existing products already on the market, maintain close relationships with our supply chain partners and key customers, and deliver new and improved products before our competitors. In addition, our competitiveness is affected by the quality of our customer service and technical support.
We compete primarily with Qorvo, Inc., NXP Semiconductors N.V., Skyworks Solutions, Inc., and MACOM Technology Solutions Inc.
Many of our current and potential competitors have entrenched market positions and customer relationships, established patents, and other intellectual property and substantial technological capabilities. The selection process for our products is highly competitive, and our end-user customers provide no guarantees that they will include our products in the next generation of their products. Additionally, many of our competitors may have significant financial, technical, manufacturing, and marketing resources, which may allow them to implement new technologies and develop new products more quickly.
7
Table of Contents
Intellectual Property (IP)
Our IP, including patents, copyrights, trademarks, and trade secrets, is essential to our business, and we actively seek opportunities to leverage our IP portfolio to promote our business interests. We also actively seek to monitor and protect our global IP rights and deter unauthorized use of our IP and other assets. Such efforts can be complex because of the absence of consistent international standards and laws. Moreover, we respect the IP rights of others and strive to mitigate the risk of infringing or misappropriating third-party IP.
Patent applications are filed within the U.S. and may be filed in other countries where we have a market presence. On occasion, some applications do not mature into patents for various reasons, including rejections based on prior art. In addition, the laws of some foreign countries do not protect IP rights to the same extent as U.S. laws. We have two patents, each of which will expire in February 2034. Because of our rapid innovation and product development and the comparatively slow pace of patenting processes, our products could be obsolete before the related patents expire or are granted. However, we believe the duration and scope of our patents are sufficient to support our business, which as a whole is not significantly dependent on any one particular patent or IP right.
We periodically register federal trademarks, service marks, and trade names that distinguish our product brand names in the market. We also monitor these marks for their proper and intended use. Additionally, we rely on non-disclosure and confidentiality agreements to protect our interest in confidential and proprietary information that gives us a competitive advantage, including business strategies, unpatented inventions, designs, and process technology. Such information is closely monitored and made available only to those employees whose responsibilities require access to the data.
Rights in trademarks, service marks, and trade names do not have expiration dates. Of those rights, we have ninefederal registrations at the United States Patent and Trademark Office (USPTO). The registrations have (and will have) technical expiration dates, but each is renewable indefinitely.
8
Table of Contents
Human Capital
We believe that our employees are our greatest assets, and we must continue to attract, develop, retain, and motivate our employees to remain competitive and execute our business strategy. We strive to meet these objectives by offering competitive pay and benefits in a diverse, inclusive, and safe workplace. In addition, we provide opportunities for our employees to grow and develop their careers.
As of December 31, 2025, we had 50 employees including four international employees. By region, approximately92% of our total employees are located in the United States and 8% in Asia. By primary job function, about 48% of our employees have engineering or technician roles, 10% are in operations, and 42% have sales, marketing, or other administrative roles. None of our employees are represented by labor unions or covered by collective bargaining agreements. We consider our relationship with our employees to be good.
Competitive Pay and Benefits
We provide compensation and benefits packages that we believe are competitive within our industry. We use a combination of compensation and other programs (which vary by region and salary grade) to attract, motivate and retain our employees, including stock-based compensation, retirement programs, unlimited personal time off, and health and wellness benefits and programs. In addition, we benchmark our compensation and benefits packages annually to remain competitive with our peers and attract and retain talent throughout our organization.
Employee Recruitment, Retention, and Development
We are committed to recruiting, hiring, retaining, promoting, and engaging a diverse workforce to serve our global customers. We have established relationships with professional associations and industry groups to attract talent proactively. In addition, we partner with universities to recruit undergraduate and graduate students for our internship program and entry-level positions. We also invest in employee development programs to provide employees with the training and education they need to help them achieve their career goals and build relevant skills.
We believe our unique corporate culture, competitive compensation and benefits programs, and career growth and development opportunities promote longer employee tenure and reduce turnover. We monitor employee turnover rates as our success depends upon retaining and investing in our highly skilled technical staff. As a result, our attrition rate has consistently been below the technology industry average.
Diversity
We value the uniqueness that an inclusive and diverse global team brings to our Company. Therefore, we are focused on creating an environment that leverages the perspectives and contributions of each employee.
Safety, Health, and Wellness
We prioritize safe working conditions. We are committed to an injury-free workplace and provide dedicated workplace training and leadership support to reduce or eliminate health and safety risks.
Facilities
Our corporate headquarters are located in Greensboro, N.C., where we lease approximately 50,000 square feet of office space under a lease agreement that commenced in the first quarter of 2023 when we took possession of the building. The lease term for our headquarters is 10 years and two months.
9
Table of Contents
ITEM 1A. RISK FACTORS
Investing in our securities involves a high degree of risk. Before making your decision to invest in shares of our common stock, you should carefully consider the risks described below, together with the other information contained in this Annual Report, including our consolidated financial statements and the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations”. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that affect us. We cannot assure you that any of the events discussed below will not occur. These events could have a material and adverse impact on our business, financial condition, results of operations, and prospects. If that were to happen, the trading price of our common stock could decline, and you could lose all or part of your investment.
Risk Factors Summary
● Our sales have been concentrated in a small number of customers.
10
Table of Contents
● If we experience poor manufacturing yields, our operating results may suffer.
● We operate in a very competitive industry and must continue to innovate.
11
Table of Contents
12
RISKS RELATED TO OUR BUSINESS AND INDUSTRY
Our future capital needs are uncertain and we may need to raise additional capital to fund our operations and support our business growth, and such capital may not be available on attractive terms, if at all.
Our cash balance stood at $4.2 million on December 31, 2025; and we have recorded an operating loss of $4.7 million and a net loss of $7.0 million for the year ended December 31, 2025. While we reduced our operating losses to $0.2 million in the third quarter of 2025, generated a modest operating profit of $55 thousand in the fourth quarter of 2025, and generated positive operating cash flow of $0.9 million in the third quarter of 2025 and $1.1 million in the fourth quarter of 2025, we expect to continue to experience net losses and negative cash flows in the near term, as our Company grows. While we believe that our existing cash resources, together with available borrowings and amended debt terms, provide sufficient liquidity to fund operations for at least the next twelve months, we have based these estimates on assumptions that may prove to be wrong, and we could spend our available financial resources much faster than we currently expect and need to raise additional capital to fund our operations and support our business growth. However, equity and debt financing might not be available when needed or, if available, might not be available on terms satisfactory to us.
Furthermore, if we issue equity securities to raise additional capital, our existing stockholders may experience dilution, and the new equity securities may have rights, preferences and privileges senior to those of our existing stockholders. For example, in August 2024, we sold to shares of Series A convertible preferred stock (“Series A Preferred Stock”) and warrants to purchase shares of our common stock, that collectively represented approximately 49.7% of our total outstanding shares of common stock based on our shares outstanding as of December 31, 2024, assuming full conversion of the Series A Preferred Stock and full exercise of the warrants for cash. So long as NR-PRL Partners, LP ("North Run") and its affiliates collectively beneficially own at least 20% of the Conversion Shares underlying the preferred shares issued in 2024 (the “Buyer Ownership Condition”), we may not, without the consent of North Run: create, authorize, or issue shares of capital stock that are senior or pari passu to the Series A Preferred Stock; incur aggregate indebtedness for borrowed money (subject to certain exceptions) in excess of $10.0 million; change our line of business; or amend, alter or repeal any provision of the Amended and Restated Certificate of Incorporation or bylaws in a manner that adversely affects the special rights, powers and preferences of the Series A Preferred Stock. In addition, for so long as the Buyer Ownership Condition is satisfied, the Company may not, without the consent of North Run, issue more than ten percent (10%) of its outstanding shares of common stock as of August 2, 2024 (subject to exceptions for stock plans and acquisitions). The Series A Preferred Stock ranks senior to the common stock as to distributions and payments upon the liquidation, dissolution and winding up of the Company, and holders of the Series A Preferred Stock will participate with the holders of the common stock on an as-converted basis to the extent any dividends are declared on common stock. Holders of Series A Preferred Stock are also entitled to redemption rights under certain circumstances. The redemption rights and liquidation preferences assigned to holders of the Series A Preferred Stock, and any other repurchase or redemption rights or liquidation preferences we may assign to holders of preferred stock in the future, could affect the residual value of the common stock.
Debt financing, if available, may involve covenants restricting our operations or our ability to incur additional debt. Any debt financing or additional equity that we raise may contain terms that are not favorable to us or our stockholders. If we are unable to obtain adequate financing or financing on terms satisfactory to us in the future, our ability to continue as a going concern, to support our business growth, and to respond to business challenges could be significantly limited as we may have to delay, reduce the scope of, or eliminate some or all of our initiatives, which could harm our operating results. Ultimately, if we do not become profitable or secure additional financing in a timely manner, we will be unable to fund ongoing operations and pay our obligations as they become due, affecting our ability to continue as a going concern.
13
Table of Contents
We have incurred significant losses in the past and will likely experience losses in the future.
We have incurred significant losses in the past and recorded a net loss of $7.0 million for the year ended December 31, 2025, and $10.8 million for the year ended December 31, 2024. As of December 31, 2025, we had an accumulated deficit of $60.8 million and $53.8 million at December 31, 2024. Our business and stock price may be adversely affected if we cannot make consistent progress toward future profitability.
Our ability to be profitable in the future depends upon continued demand for our products from existing and new customers. Furthermore, further adoption of our products depends upon our ability to improve the quality of our products. In addition, our profitability will be affected by, among other things, our ability to execute on our business strategy, the timing and size of customer orders, the pricing and costs of our products, competitive offerings, macroeconomic conditions affecting the semiconductor industry, and the extent to which we invest in sales and marketing, research and development, and general and administrative resources.
If we fail to maintain effective internal control over financial reporting, we may not be able to report our financial results accurately and timely.
Our management is responsible for establishing and maintaining adequate internal control over financial reporting designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of consolidated financial statements for external purposes in accordance with U.S. generally accepted accounting principles (“GAAP”). Our management is likewise required, on a quarterly basis, to evaluate the effectiveness of our internal controls and to disclose any changes and material weaknesses identified through such evaluation in those internal controls. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim consolidated financial statements will not be prevented or detected on a timely basis. A significant deficiency is a deficiency, or a combination of deficiencies, in internal control that is less severe than a material weakness, yet important enough to merit attention by those responsible for oversight of the Company’s financial reporting.
We previously identified material weaknesses and a significant deficiency that have since been remediated. We have implemented measures designed to improve our internal control over financial reporting and disclosure controls and procedures. However, we can offer no assurance that these remediation steps will prevent any future deficiencies in our internal control over financial reporting.
Any failure to maintain adequate internal control over financial reporting could adversely impact our ability to report our financial position and results from operations on a timely and accurate basis, which in turn could harm our business, impair investor confidence in the accuracy and completeness of our financial reports, impair our access to the capital markets, cause the price of our common stock to decline and subject us to higher risk of shareholder litigation.
Market and economic conditions may negatively impact our business, financial condition, and share price.
A general slowdown in the global economy or in a particular region or industry, other unfavorable changes in economic conditions, such as inflation, higher interest rates, tightening of the credit markets, recession or slowing growth, or an increase in trade tensions with U.S. trading partners could negatively impact our business, financial condition and liquidity. Our general business strategy may be adversely affected by any such economic downturns, volatile business environments and continued unstable or unpredictable economic and market conditions. If these conditions continue to deteriorate or do not improve, it may make any necessary debt or equity financing more difficult to complete, more costly, and more dilutive. Failure to secure any necessary financing in a timely manner and on favorable terms could have a material adverse effect on our growth strategy, financial performance, and share price and could require us to delay or abandon development or commercialization plans.
We operate in the highly cyclical semiconductor industry, which is subject to significant downturns that may negatively impact our results of operations.
The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change and price erosion, evolving technical standards, short product life cycles (for semiconductors and for the end-user products in which they are used) and wide fluctuations in product supply and demand. From time to time, these and other factors, together with changes in general economic conditions, cause significant upturns and downturns in the industry in general and in our business in particular. Periods of industry downturns have been characterized by diminished demand for end-user products, high inventory levels, underutilization of manufacturing capacity, changes in revenue mix and accelerated erosion of average selling prices. We have experienced these conditions in our business in the past and may experience renewed, and possibly more severe and prolonged, downturns in the future as a result of such cyclical changes. This may reduce our results of operations. Current global macroeconomic conditions, including higher inflation and interest rates and uncertainty caused by the Russian-Ukraine war, Israel-Hamas war, sustained military action and conflict in the Red Sea, and trade tensions between the U.S., the PRC and other countries have led to weaker end-market demand and unstable supply chain. We continue to monitor these trends and uncertainties, and any decline in end-market demand and increase in inventory levels could negatively impact our financial condition and results of operations.
We base our planned operating expenses in part on our expectations of future revenue, and a significant portion of our expenses is relatively fixed in the short term. If revenue for a particular quarter is lower than we expect, we likely will be unable to proportionately reduce our operating expenses for that quarter, which would harm our operating results for that quarter.
14
Table of Contents
We have a limited operating history upon which investors can evaluate our business and prospects.
We are an emerging commercial company that began commercial operations selling products in 2014. Since we base our expectations of potential customers and future demand for our products on only limited experience, it is difficult for our management and investors to forecast and evaluate our prospects and revenues accurately. Therefore, the proposed progression of our operations is subject to the risks inherent in light of the expenses, difficulties, complications, and delays frequently encountered in connection with the growth of any new business, as well as those risks that are specific to our Company in particular. The risks include but are not limited to our reliance on third parties to complete some processes for the manufacturing and packaging of our products and the possibility that we will not be able to achieve design wins with our products. In addition, to successfully introduce and market our products at a profit, we must establish brand name recognition and competitive advantages for our products. There are no assurances that the Company can successfully address these challenges. If unsuccessful, the Company and its business, financial condition, and operating results will be materially and adversely affected.
We may not generate sufficient cash to service our current or future debt or fund capital expenditures. As a result, we may be forced to take other actions to satisfy our debt obligations and financing requirements, which may not be successful or on terms favorable to us.
Our ability to make scheduled payments on, or to refinance, our current or future debt obligations and to fund working capital, planned expenditures and expansion efforts depends on our ability to achieve profitability or raise additional funds, and on our financial condition and operating performance. However, our financial condition and operating performance are subject to prevailing economic and competitive conditions and specific financial, business, and other factors beyond our control. As a result, we cannot ensure that we will maintain a level of cash flows from operating activities sufficient to permit us to pay our debt. For example, should our cash flows and capital resources be insufficient to fund our debt service obligations, we may face liquidity issues and be forced to reduce or delay investments and capital expenditures, sell assets, seek additional capital, or restructure or refinance our debt. These alternative measures may not be successful and may not permit us to meet our scheduled debt service and other obligations.
Our operating results are substantially dependent on developing new products and achieving design wins. Therefore, our future revenues that fund our growth in operations, continuing product development, administrative costs, and sales and marketing efforts are highly dependent on winning slots for our new product offerings.
Our largest markets are characterized by high levels of competition from formidable market participants, and they are often much larger in size and have greater capacity than us. Therefore, to effectively compete in our markets, we must introduce new product solutions that satisfy customer demands for greater functionality and improved performance. However, it is possible that we may fail to provide such solutions in time for our end-user customers’ design cycles. In that case, we may experience a lack of growth that is central to our strategic plans or even suffer substantial decreases in our revenue by missing out on these design windows.
Our success depends on our ability to develop and introduce new products in a timely and cost-effective manner and secure production orders from our customers. The development of new products is a highly complex process, and we have experienced delays in completing the development and introduction of new products at times.
We participate in markets with a broad array of applications, which makes our ability to predict market requirements more challenging and consequently makes the definition and design of new products that address those requirements more difficult to ensure the future success of our business.
Our success at effective product development depends on several factors, including the following:
● our ability to recruit and retain qualified product design engineers;
● our ability to supply products that are highly reliable and free of defects;
● our ability to meet industry and customer product ramps; and,
The industry and the markets in which we operate are highly competitive and subject to rapid technological change. Therefore, for our RF products to be competitive and achieve market acceptance, we need to keep pace with the rapid development of new process technologies.
The markets in which we compete are intensely competitive. We operate primarily in the industry that designs and produces semiconductor components for wireless communications and other wireless devices, which are subject to rapid changes in both product and process technologies based on demand and evolving industry standards. The markets for our products are characterized by:
● rapid changes in customer requirements;
● frequent new product introductions and enhancements;
15
Table of Contents
● fluctuating pricing; and,
● evolving industry standards.
Our R&D activity and resulting products could become obsolete or less competitive sooner than anticipated because of a faster-than-expected change in one or more of the above-noted factors. Therefore, for our products to be competitive and achieve market acceptance, we need to keep pace with the rapid development of new process technologies, which requires us to:
● implement cost reductions in the manufacturing of our products.
Many of our current and potential competitors have entrenched market positions and customer relationships, established patents, and other IP and substantial technological capabilities. Additionally, many of our competitors may have significant financial, technical, manufacturing, and marketing resources, which may allow them to implement new technologies and develop new products more quickly.
We are still developing many of our products, and they may not be accepted in the market or by significant customers.
Although we believe that our products provide advantages over existing MMIC products in the market, we cannot be sure that new products will achieve market acceptance.
The successful development and market acceptance of our MMIC products will be highly complex and will depend on the following principal competitive factors, including our ability to:
● protect, create or otherwise obtain adequate IP for our technology; and,
If we are unsuccessful in accomplishing these objectives, we may not compete successfully against current and potential competitors. As a result, the market may not accept our future MMIC products.
In addition, Tier 1 manufacturers may be less receptive to adopting solutions from smaller companies such as the Company due to their desire to limit the expansion of their approved vendor lists. The Company could also face pressure from competitors who can provide more lucrative bundling options due to the breadth of their overall portfolio.
16
Table of Contents
We depend on a large distributor and several large customers in the automotive and wireless infrastructure market.
A substantial portion of our product revenue results from sales to large suppliers in the automotive industry, which requires special performance and reliability requirements and stringent volume delivery demands. In addition, we rely heavily on the wireless infrastructure market, which, similar to our automotive customers, requires we reliably meet high-volume delivery schedules. Therefore, our future operating results will be heavily affected by the success of large automotive and wireless infrastructure customers.
Our three largest end customers collectively accounted for approximately 36% and 43% of our revenue for 2025 and 2024, respectively. We often service end customers through our largest distributor, who will ship to and bill directly for product shipments. The concentration of billings to this distributor as a portion of our total revenues was 65% and 77% for fiscal years 2025 and 2024, respectively. It is possible that demand for their customers’ products decreases materially, which could negatively impact our financial results.
We depend heavily on third parties.
We partner with a limited number of external suppliers and rely on them to fulfill our customers’ orders. These third-party suppliers perform complex manufacturing processes, including die processing, packaging, and test, tape and reel. The semiconductor industry has experienced supply constraints for specific items.
If these third-party suppliers fail to deliver our products on time, we will be unable to satisfy our customers’ orders, which will negatively impact our financial results, cash flow, and our ability to fund further product development efforts.
Our key suppliers commit to being compliant with applicable ISO 9001 quality standards; however, should they experience quality and reliability issues, this may delay shipments to our customers and negatively affect our reputation directly with customers and our reputation in the market, which could negatively impact our financial results.
We sell to several large companies with considerable bargaining power, which may require us to agree to terms and conditions that could harm our business or ability to recognize revenues.
Large companies comprise a significant portion of our current and target customer base. These customers generally have greater purchasing power than smaller entities and, accordingly, often demand more favorable terms from suppliers, including us. As a result, as we seek to expand our sales to existing customers and acquire new customers, we may be required to agree to terms and conditions that are more favorable to our customers, and that may affect the timing of our ability to recognize revenue, increase our costs, and harm our business, financial condition, and results of operations. Failure to satisfy such onerous terms may result in litigation, damages, additional costs, market share loss, and reputation loss. Additionally, these large customers may require that we agree to most-favored customer or exclusivity provisions concerning specific products that restrict our ability to do business with other customers causing us to increasingly rely on such large customers.
We face risks related to sales through independent sales representatives and distributors.
We sell a significant portion of our products through third-party distributors. We depend on these distributors to help us create end-customer demand, provide technical support and other value-added services to customers, fill customer orders, and stock our products. As a result, a material change in our relationship with one or more of these distributors or their failure to perform as expected could negatively impact our financial results.
Our ability to add or replace distributors for some of our products may be limited because our end-customers may be hesitant to accept the addition or replacement of a distributor due to advantages in the incumbent distributors’ technical support and favorable business terms related to payments, discounts, and stocking of acceptable inventory levels.
Using third parties for sales representation and distribution exposes us to many risks, including competitive pressure, concentration, credit risk, and compliance risks. Other third parties may use one of our distributors or sales representatives to sell products that compete with our products. We may need to provide financial and other incentives, such as higher commission rates, to encourage them to prioritize the sale of our products. Our distributors may face financial difficulties, including bankruptcy, which could harm our collection of accounts receivable and financial results. Violations of the FCPA or similar laws by our distributors or other third-party intermediaries could have a material impact on our business.
Failure to manage risks related to our use of distributors or other third-party intermediaries may reduce sales, increase expenses, and weaken our competitive position.
17
Table of Contents
Business disruptions could harm our business and adversely affect our results of operations.
Our business could be disrupted by natural disasters, industrial accidents, cybersecurity incidents, telecommunications failures, power or water shortages, extreme weather conditions, public health issues, military actions, acts of terrorism, political or regulatory issues, and other man-made disasters or catastrophic events.
We carry commercial property damage and business interruption insurance against various risks, with limits we deem adequate, for reimbursement for damage to our fixed assets and the resulting disruption of our operations. However, this coverage likely would not wholly cover the negative impact on our business for any lengthy interruption, which could harm our Company in an unanticipated way and result in significant losses, a decline in revenue, and an increase in our costs and expenses. Disruptions from these events would likely require substantial recovery time and impact profits and cash flow in a significant manner. In addition, such business disruptions would adversely impact our relationships with our customers.
If our customers independently experience comparable business disruptions, they may reduce or cancel their orders, which may adversely affect our results of operations.
If we experience poor manufacturing yields, our operating results may suffer.
Our products are unique and fabricated using semiconductor process technologies that are highly complex. In some cases, we assemble our products in customized packages. Some of our products consist of multiple components in a single module and feature enhanced levels of integration and complexity. Our customers insist that we design our products to meet their same quality, performance, and reliability specifications. Our manufacturing yield is a combination of yields across the entire supply chain, including wafer fabrication, assembly, and test yields. Due to the complexity of our products, we periodically experience difficulties in achieving acceptable yields, particularly for new products.
Our end-user customers test our products once they assemble them into their products. The number of usable products that result from our subcontractor production process can fluctuate because of many factors, including:
● design errors;
● defects in photomasks (which are used to print circuits on a wafer);
● minute impurities and variations in materials used;
● contamination of the manufacturing environment;
● equipment failure or variations in the manufacturing processes;
● losses from broken wafers or other human error; and,
● defects in substrates and packaging.
Although our supply chain partners and our engineering and quality groups constantly seek to improve our manufacturing yields, such efforts may encounter significant barriers to success resulting in less-than-optimal yields or losses that would directly impact profits and increase costs and lower cash flows. For example, costs of product defects and deviations from required specifications include the following:
● disposal of inventory or financial write-offs of inventory;
● accepting returns of products;
● providing product replacements at no charge;
● defending against litigation.
18
Table of Contents
These issues could negatively impact our market position and reputation with customers, resulting in long-term harm to our business and financial results.
We are subject to inventory risks and costs because we build our products based on anticipated customer orders and forecasts often before receiving purchase orders for the products.
To ensure the availability of our products for some of our largest end-user customers, we start manufacturing certain products in advance of receiving purchase orders based on forecasts provided by these customers. However, these forecasts do not represent binding purchase commitments, and we do not recognize sales for these products until they are shipped to our customers. As a result, we incur significant inventory and manufacturing costs in advance of anticipated sales. Because demand for our products may not materialize or may be lower than expected, manufacturing based on forecasts subjects us to heightened risks of higher inventory carrying costs, increased obsolescence, and higher operating costs. In addition, if product demand decreases or we fail to forecast demand accurately, we could be required to write off inventory, which would negatively impact our gross margin and other operating results.
We operate in a very competitive industry and must continue to innovate.
We compete with several companies primarily to design, manufacture, and sell RF solutions and discrete integrated circuits and modules. Increased competition from any source could adversely affect our operating results through lower prices for our products, reduced demand for our products, losses of existing design slots with critical customers, and a corresponding reduction in our ability to recover development, engineering, and manufacturing costs.
Many of our existing and potential competitors have entrenched market positions, historical affiliations with OEMs, considerable internal manufacturing capacity, established IP rights, and substantial technological capabilities. The semiconductor industry has experienced increased industry consolidation over the last several years, a trend we expect to continue. Many of our existing and potential competitors may have more significant financial, technical, manufacturing, or marketing resources than we do. As a result, we cannot be sure that we will compete successfully with our competitors.
Unfavorable changes in interest rates, pricing of certain precious metals, utility rates, and foreign currency exchange rates may adversely affect our financial condition, liquidity, and results of operations.
Any of these macro conditions could negatively impact our supply chain partners and the industry as a whole, which could materially decrease our profits and cash flow.
To compete, we must attract, retain, and motivate key employees, and our failure to do so could harm our business and our results of operations.
We must hire and retain qualified employees, develop leaders for essential business functions, and train and motivate our employees. Our future operating results and success depend on keeping critical technical personnel and management and expanding our sales and marketing, R&D, finance, and administration personnel. We do not have employment agreements with the vast majority of our employees.
19
Table of Contents
We must attract qualified personnel. The competition for qualified personnel is intense, especially considering the size of our organization, which must compete with much larger companies for top talent. The number of people with experience, particularly in RF engineering, software engineering, integrated circuit design, and technical marketing and support, is limited. In addition, existing or new immigration laws, policies, or regulations in the U.S. may limit the pool of available talent. Changes in the interpretation and application of employment-related laws to our workforce practices may also result in increased operating costs and less flexibility in meeting our changing workforce needs. As a result, we cannot be sure that we will be able to attract and retain skilled personnel in the future, which could harm our business and our results of operations.
Litigation or legal proceedings could expose us to significant liabilities, occupy a considerable amount of our management’s time and attention, and damage our reputation.
We may, from time to time, be a party to various litigation claims and legal proceedings. We will evaluate these claims and proceedings to assess the likelihood of unfavorable outcomes and estimate, if possible, the amount of potential losses. For example, our manufacturers’ failure to successfully manufacture products that conform to our design specifications and the U.S. Federal Communications Commission's ("FCC") strict regulatory requirements may lead to product defects and substantial costs to repair or replace these parts or materials, significantly impacting our ability to develop and implement our technology and improve our products’ performance. In addition, claims made or threatened by our suppliers, distributors, end-user customers, competitors, or current or former employees could adversely affect our relationships, damage our reputation, or otherwise adversely affect our business, financial condition, or results of operations. The costs associated with defending legal claims and paying damages could be substantial. Our reputation could also be adversely affected by such claims, whether or not successful.
We may establish reserves as appropriate based upon assessments and estimates under our accounting policies in accordance with GAAP. We base our assessments, estimates, and disclosures on the information available to us at the time and rely on legal and management judgment. Actual outcomes or losses may differ materially from assessments and estimates. Actual settlements, verdicts, or resolutions of these claims or proceedings may negatively affect our business and financial performance. For example, a successful claim against us that is not covered by insurance or over our available insurance limits could require us to make significant damages payments and could materially adversely affect our financial condition, results of operations, and cash flows.
We may become subject to warranty claims, product recalls, and product liability claims that could materially and adversely affect our financial condition and results of operations.
We may become subject to warranty claims, product recalls, and product liability claims that could lead to significant expenses. In addition, although we maintain reserves for reasonably estimable liabilities and purchase product liability insurance, we may elect to self-insure concerning some issues, and our reserves may be inadequate to cover the uninsured portion of such claims.
Product liability insurance is subject to significant deductibles, and such insurance may be unavailable or inadequate to protect against all claims. If one of our end-user customers recalls a product containing one of our devices, we may incur material costs and expenses, including replacement costs, direct and indirect product recall-related costs, diversion of technical and other resources, and reputational harm. Our customer contracts typically contain warranty and indemnification provisions, and in some instances, may also have liquidated damages provisions relating to product quality issues. The potential liabilities associated with such provisions are significant, and in some cases, are included in agreements with some of our largest end customers. Any such liabilities may significantly exceed any revenue we receive from the sale of the relevant products. Costs, payments, or damages incurred or paid by us in connection with warranty and product liability claims and product recalls could materially and adversely affect our financial condition and the results of operations.
Impact of Product Demand on our Business
Our revenue, earnings, margins, and other operating results have fluctuated significantly and may fluctuate considerably in the future. If demand for our products weakens as a result of economic conditions or for other reasons, our revenue and profitability will be impacted. Our future operating results will depend on many factors, including business, political and macroeconomic changes such as trade restrictions and recession or slowing growth in the semiconductor industry and the overall global economy.
If demand for our products slows, our financial and operating results will be negatively impacted, thus impeding our ability to fund future product development efforts and, in extreme cases, negatively impacting our ability to finance normal operations without acquiring funds through credit or equity raises.
In addition, if our end customers experience spikes in demand far more than anticipated, our ability to respond effectively to such demand might be impacted. This type of demand surge could negatively impact cash flow (e.g., supply chain inventory requirements) in the short term and potential loss of credibility with the industry in the long term if we do not meet demands reasonably.
We are subject to high degrees of product demand variability. Even if we achieve a design win, our customers can delay or cancel a program without advanced warning, creating risk for inventory obsolescence, ineffective use of cash, and resources channeled to less-than-optimal business opportunities. The loss of a design win and failure to add new design wins to replace lost revenue and weakened customer demand would have a material adverse effect on our business, financial condition, and the results of operations.
20
Table of Contents
We rely on our intellectual property portfolio and may not be able to successfully protect against the use of our intellectual property by third parties.
We rely on a combination of patents, trademarks, trade secret laws, confidentiality procedures, and licensing arrangements to protect our intellectual property rights. We cannot be sure that patents will be issued from any pending applications or that patents will be issued in all countries where we can sell our products. Further, we cannot be sure that any claims allowed from pending applications will be of sufficient scope or strength to provide meaningful protection against our competitors. Our competitors may also be able to design around our patents.
The laws of some countries in which we develop, manufacture, or sell our products may not protect our products or intellectual property rights to the same extent as U.S. laws. This risk increases the possibility of misappropriation or infringement of our technology and products. Although we intend to defend our intellectual property rights vigorously, we may not be able to prevent the misappropriation of our technology. Additionally, our competitors may independently develop non-infringing technologies that are substantially equivalent or superior to ours.
We may need to engage in legal actions to enforce or defend our intellectual property rights. Generally, intellectual property litigation is both expensive and unpredictable. Our involvement in intellectual property litigation could divert the attention of our management and technical personnel and have a material, adverse effect on our business.
We may be subject to claims of infringement of third-party intellectual property rights.
Our operating results may be adversely affected if third parties claim that our products infringed their patent, copyright, or other intellectual property rights. Such assertions could lead to expensive and unpredictable litigation, diverting the attention of management and technical personnel. An unsuccessful result in such litigation could adversely affect our business, including injunctions, exclusion orders, and royalty payments to third parties. In addition, if one of our customers or a supplier to one of our customers is found to have infringed on third-party intellectual property rights, such a finding could adversely affect the demand for our products.
If our products contribute to a data security breach, we may lose current or future customers, our reputation and business may be harmed, and we may incur liabilities.
Our end-user customers use our products in a wide variety of ways. Although we do not control security features surrounding the use of our products by our end-user customers, our end-user customers’ security measures may not detect or prevent hacker interceptions, break-ins, security breaches, the introduction of viruses or malicious code, such as “ransomware,” and other disruptions that may jeopardize the security of information transmitted through an electronic pathway using our products. In addition, cyber-attacks and other malicious Internet-based activity continue to increase generally. They may be directed at either the electronic transmission pathway within which our end-user customers use our products or even our own our corporate information technology software and infrastructure.
Because techniques used to obtain unauthorized access, exploit vulnerabilities, or sabotage systems change frequently and generally are not identified until they are launched against a target, we may be unable to anticipate these techniques, patch vulnerabilities, or implement adequate preventative measures as we research and develop our products. In addition, certain of our end-user customers may have a greater sensitivity to security defects or breaches in electronic pathways using our products. As a result, any actual or perceived security breach or theft of the business-critical data of one or more of our end-user customers, regardless of whether the breach is attributable to the electronic transmission through one of our products, may adversely affect the market’s perception of our products. There can be no assurance that limitation of liability, indemnification, or other protective provisions in our contracts would be applicable, enforceable, or adequate in connection with a security breach, or would otherwise protect us from any such liabilities or damages concerning any particular claim. We also cannot be sure that our existing general liability insurance coverage and coverage for errors or omissions will continue to be available on acceptable terms or will be available in sufficient amounts to cover one or more large claims, or that the insurer will not deny coverage as to any future claim. As a result, one or more large claims may be asserted against us that exceed our available insurance coverage, or changes in our insurance policies may occur, including premium increases or the imposition of large deductible or co-insurance requirements.
21
Table of Contents
Furthermore, a party that can circumvent security measures or exploit any vulnerabilities in end-user customer systems using our products could misappropriate our end-user customers’ proprietary or confidential information, cause an interruption in their operations, damage or misuse their computer systems, misuse any information that they misappropriate, cause termination of our sales with those end-user customers, subject us to notification and indemnity obligations, litigation, and regulatory investigation or governmental sanctions, cause us to lose existing customers, and harm our ability to attract future customers. Any such breach could cause harm to our reputation, business, financial condition, and results of operations, and we may incur significant liability. As a result, our business and financial position may be harmed.
Security breaches and other disruptions could compromise our proprietary information and expose us to liability, which would cause our business and reputation to suffer.
We rely on trade secrets, technical know-how, and other unpatented proprietary information relating to our product development and manufacturing activities to provide us with competitive advantages. We protect this information by entering into confidentiality agreements with our employees, consultants, strategic partners, and other third parties. We also design our computer systems and networks and implement various procedures to restrict unauthorized access to the dissemination of our proprietary information.
We face internal and external data security threats. For example, current, departing, or former employees or third parties could attempt to improperly use or access our computer systems and networks to copy, obtain, or misappropriate our proprietary information or otherwise interrupt our business. Like others, we are also subject to significant system or network disruptions from numerous causes, including computer viruses and other cyber-attacks, facility access issues, new system implementations, and energy blackouts.
Security breaches, computer malware, phishing, spoofing, and other cyber-attacks have become more prevalent and sophisticated in recent years. While we defend against these threats daily, we do not believe that such attacks have caused us any material damage to date. Because the techniques used by computer hackers and others to access or sabotage networks constantly evolve and generally are not recognized until launched against a target, we may be unable to anticipate, counter, or ameliorate all these techniques. As a result, our and our customers’ proprietary information may be misappropriated, and we cannot predict the impact of any future incident. Any loss of such information could harm our competitive position, result in a loss of customer confidence in the adequacy of our threat mitigation and detection processes and procedures, cause us to incur significant costs to remedy the damages caused by the incident, and divert management and other resources. We routinely implement improvements to our network security safeguards, and we are devoting increasing resources to the security of our information technology systems. However, we cannot assure you that such system improvements will be sufficient to prevent or limit damage from future cyber-attacks or network disruptions.
The costs related to cyber-attacks or other security threats, or computer systems disruptions typically would not be fully insured or indemnified by others. As a result, the occurrence of any of the events described above could result in the loss of competitive advantages derived from our R&D efforts or our IP. Moreover, these events may result in the early obsolescence of our products, product development delays, or diversion of the attention of management and critical information technology and other resources, or otherwise, adversely affect our internal operations and reputation or degrade our financial results and stock price.
Our sales have been concentrated in a small number of end-user customers.
Our revenues have been concentrated in a relatively small number of large end-user customers, and we have historically derived a significant percentage of our total product revenues from a few end-user customers. For fiscal years ended December 31, 2025, and 2024, our five largest end-user customers accounted for approximately 50% and 55% of our total product revenues, respectively. If one of our large end-user customers ceases or significantly reduces its product orders from us, or if we fail to generate additional product sales with these or similarly significant end-user customers, there could be a material adverse effect on our business, financial condition or results of operations.
22
Table of Contents
We expect that we will continue to depend upon a relatively small number of end-user customers for a significant portion of our total revenues for the foreseeable future. Therefore, the loss of any of these end-user customers or industry sector groups of end-user customers for any reason or a change of relationship with any of our key end-user customers could cause a material decrease in our total revenues.
Additionally, mergers or consolidations among our end-user customers could reduce the number of our end-user customers and could adversely affect our revenues and sales. In particular, if our end-user customers are acquired by entities that are not also our end-user customers, that do not use our products or purchase products from one of our competitors, and choose to discontinue, reduce or change the volume of product purchases from us, our business and operating results could be materially and adversely affected.
We depend on many technology providers, and if we cannot source solutions from them, our business and operating results could be harmed.
Our product design and development processes incorporate multiple software components obtained from licensors on a non-exclusive basis. Our license agreements can be terminated for cause. In many cases, these license agreements specify a limited term and are only renewable beyond that term with the licensor’s consent. If a licensor terminates a license agreement for cause, objects to its renewal or conditions renewal on modified terms and conditions, we may be unable to obtain licenses for equivalent software components on reasonable terms and conditions, including licensing fees, warranties, or protection from infringement claims. In addition, some licensors may discontinue licensing their software to us or support the software version used in our product design and development processes. In such circumstances, we may need to redesign our processes with substantial cost and time investment to incorporate alternative software components or be subject to higher technology costs. Any of these circumstances could adversely affect the cost and efficiency of our product research and development.
We may not be able to keep pace with changes in technology or provide timely enhancements to our products.
The market for our products is characterized by rapid technological advancements, changes in customer requirements, frequent new product introductions and enhancements, and changing industry standards. To maintain our growth strategy, we must adapt and respond to our end-user customers’ technological advances and technological requirements. Our future success will depend on our ability to: enhance our current products; introduce new products to keep pace with products offered by our competitors; increase the performance of our internal systems, particularly our research and development systems that meet our end-user customers’ changing requirements; and adapt to technological advancements and changing industry and regulatory standards. We continue to make significant investments in the research and development of new products. If our products become outdated, it may negatively impact our ability to meet performance expectations related to quality, time to market, cost, and innovation relative to our competitors. In addition, the failure to achieve product performance requirements of our new and existing end-user customers and sustain good customer satisfaction may adversely impact our business and operating results.
Any failure to offer high-quality customer support for our products may adversely affect our relationships with our customers and harm our financial results.
Once our products are sold, our customers use our support organization to resolve technical issues relating to our products. In addition, we also believe that our success in selling our products is highly dependent on our business reputation and favorable recommendations from our existing customers. Therefore, any failure to maintain high-quality customer support, or a market perception that we do not maintain high-quality support, could harm our reputation, adversely affect our ability to maintain existing customers or sell our products to existing and prospective customers, and harm our business, operating results, and financial condition.
If we cannot attract and retain key personnel, our business could be harmed.
We must attract and retain highly qualified personnel to execute our business strategy. If any of our key employees were to leave, we could face substantial difficulty hiring qualified successors. We could experience a loss in productivity while any successor obtains the necessary training and experience. Although we have arrangements with some of our executive officers designed to promote retention, our employment relationships are generally at-will, and we have had key employees leave in the past. We cannot assure you that one or more key employees will not leave in the future. In particular, we compete with many other companies for semiconductor developers and other skilled engineering, marketing, sales, and operations professionals, and we may not be successful in attracting and retaining the professionals we need. We have, from time to time in the past, experienced, and we expect to continue to experience in the future, difficulty in hiring and difficulty in retaining highly skilled employees with appropriate qualifications. In particular, we have experienced a competitive hiring environment in the Greater Triad Area, where we are headquartered in North Carolina. Many of the companies with which we compete for experienced personnel have greater resources than we do. In addition, in making employment decisions, job candidates often consider the value of the equity incentives they are to receive in connection with their employment. If we and our third-party service providers experience difficulty recruiting and retaining qualified personnel, our business may be adversely affected. If the price of our stock declines or experiences significant volatility, our ability to attract or retain key employees will be adversely affected. We intend to continue to hire additional highly qualified personnel, including research and development and operational personnel. Still, we may not be able to attract, assimilate, or retain qualified personnel in the future. Any failure to attract, integrate, motivate, and retain these employees could harm our business.
Our revenues and operating results have fluctuated and are likely to continue to fluctuate, making our quarterly results difficult to predict, which may cause us to miss analyst expectations and may cause the price of our common stock to decline.
Our operating results have been and may continue to be difficult to predict, even in the near term, and are likely to fluctuate due to various factors, many of which are outside of our control.
23
Table of Contents
Comparisons of our revenues and operating results on a period-to-period basis may not be meaningful. You should not rely on our past results to indicate our future performance. Each of the following factors, among others, could cause our operating results to fluctuate from quarter to quarter:
•the financial health of our customers;
•occurrence of technological advances and potential effects on our business and operations;
•market acceptance and adoption of our products;
•changes in the regulatory environment affecting our customers;
•our ability to expand our sales and marketing operations;
•our ability to successfully integrate any acquired businesses, technologies, or assets;
•the announcement of new significant contracts or customer relationships;
•the procurement cycles of our customers and the length of our sales cycles;
•changes in end-user customer integration of our products into their business needs;
•variations in the number of new customers booked in a prior quarter, but not delivered until later quarters;
•our mix of products and royalty revenues;
•new competitive product launches by our end-user customers that negatively impact sales or our sales cycle;
•pricing, including discounts by us or our competitors;
•our ability to successfully sell our products in a timely manner;
•our ability to forecast demand and manage lead times for the recruitment and training of required personnel;
•our ability to develop and introduce new products and features to existing products that achieve market acceptance;
•the announcement of a new product, which may cause sales cycles to lengthen;
•federal or state government shutdowns; and,
•future accounting pronouncements and changes in accounting policies.
If we fail to offerhigh-qualityproducts and support for any of our products, our operating results and our ability to sell those products in the future will be harmed.
Our ability to sell our products depends on our product support team providing high-quality support. Once our products are integrated into an end-user customer’s planned use, the end-user customer typically depends on our product support team to help resolve technical issues, if they develop, and assist in optimizing the use of our products. If we do not effectively assist our end-user customers in integrating our products, succeed in helping our end-user customers quickly resolve technical and other post-integration issues, or provide effective ongoing support services, our ability to expand the use of our products within existing end-user customers and to sell our products to new customers will be harmed. If integration of our products is deemed unsatisfactory, we may incur significant costs to attain and sustain end-user customer satisfaction or, in extreme cases, our end-user customers may choose not to use our products. In addition, as we hire new engineering personnel, we may inadvertently hire underperforming people who will have to be replaced, or fail to effectively train such employees, leading in some instances to slower growth, additional costs, and poor customer relations.
24
Table of Contents
As we continue to pursue opportunities for larger sales volumes that have greater technical complexity or involve the integration of our untested products, we may experience a more extended time for our products to be integrated. As a result, our product sales revenue may be delayed. Additionally, as we enter agreements with new and existing customers for larger and more complex sales, we have been, and may continue to be, required to agree to end-user customer acceptance and cancellation clauses. With acceptance clauses, delays may occur in obtaining end-user customer acceptance regardless of the quality of our products and may cause us to defer revenue recognition where such acceptance provisions are substantive in nature, or they may require us to incur additional costs to obtain such end-user customer acceptance. Cancellation clauses may result in a customer canceling an order for products, impacting our revenues.
Our sales cycles can be lengthy, and it is difficult for us to predict when or if sales will occur.
Our sales efforts are often targeted at larger end-user customers and distributors. As a result, we face higher costs, must devote greater sales support to individual customers, have longer sales cycles, and have less predictability in completing some of our sales. Also, sales to large end-user customers and distributors often require us to provide greater levels of education regarding the use and benefits of our products. Our sales cycle length could be 12 to 24 months, depending on the end-user customer’s industry base and economic factors beyond our control, as measured from the point of initial contact with a potential customer to the time a purchase order is signed.
We believe that our customers view the purchase of our products as a significant and strategic decision. As a result, customers carefully evaluate our products, often over long periods with various internal constituencies. In addition, the sales of our products may be subject to delays if the customer has lengthy internal budgeting, integration, and approval and evaluation processes. As a result, it is difficult to predict the timing of our future sales.
We depend on our management team and our key sales and development, and engineering personnel. The loss of one or more key employees or groups could harm our business and prevent us from implementing our business plan in a timely manner.
Our success depends on our executive officers’ expertise, efficacy, and continued services. We have, in the past, and may in the future, continue to experience changes in our executive management team resulting from the departure of executives or subsequent hiring of new executives, which may be disruptive to our business. Any changes in business strategies or leadership can create uncertainty, may negatively impact our ability to execute our business strategy quickly and effectively, and ultimately be unsuccessful. In addition, the impact of hiring new executives may not be immediately realized. We are also substantially dependent on the continued service of our existing research and development personnel because of their familiarity with the inherent complexities of our products.
Failure to adequately expand and train our direct sales force and distributors will impede our growth.
We rely almost exclusively on our direct sales force and distributors to sell our products. We believe that our future growth will depend significantly on the continued development of our direct sales force and distributor relationships and their ability to manage and retain our existing end-user customer base, expand the sales of our products to existing end-user customers, and obtain new end-user customers. Because our products are complex and often must interoperate with complex technological functionality, it can take longer for our sales personnel and distributors to become fully productive. Therefore, our ability to achieve significant growth in revenues in the future will depend, in large part, on our success in recruiting, training, and retaining a sufficient number of direct sales personnel and growing our distributor base. New hires require significant training and may, in some cases, take considerable time before becoming fully productive, if at all. If we are unable to hire and develop sufficient numbers of productive direct sales personnel, and if these sales personnel are unable to achieve full productivity, sales of our products will suffer, and our growth will be impeded.
If we fail to increase market awareness of our brand and products, expand our sales and marketing operations, improve our sales execution, and increase our sales channels, our business could be harmed.
We intend to continue to add personnel and resources in sales and marketing as we focus on expanding awareness of our brand and products and capitalize on sales opportunities with new and existing customers. Our efforts to improve sales of our products will increase our sales and marketing expenses and general and administrative expense, and these efforts may not be successful. Some newly hired sales and marketing personnel may become unproductive and have to be replaced, resulting in operational and sales delays and incremental costs. If we cannot significantly increase the awareness of our brand and products or effectively manage the costs associated with these efforts, our business, financial condition, and operating results could be harmed.
25
Table of Contents
We must improve our sales execution to, among other things, increase the number of our sales opportunities and grow our revenues. We must enhance the market awareness of our products, expand our relationships with our distributor partners, and create new distributor partnerships to increase our revenues. Further, we must continue to develop our relationships with new and existing end-user customers and distributor partners and create additional sales opportunities to effectively and efficiently extend our geographic reach and market penetration. Our efforts to improve our sales execution could result in a material increase in our sales and marketing expenses and general and administrative expense. There can be no assurance that such efforts will be successful. Further, as we increase our efforts to target additional industry bases and leverage distributor partnerships to drive sales, we may be unable to tailor our sales efforts to these strategies. If we are unable to improve our sales execution significantly, increase the awareness of our products, create additional sales opportunities, expand our relationships with distributor partners, leverage our relationship with existing distributor partners, or effectively manage the costs associated with these efforts, our operating results and financial condition could be materially and adversely affected.
Our revenues are dependent on our ability to maintain and expand existing customer relationships and our ability to attract new customers.
The continued growth of our revenues depends partly on our ability to expand the use of our products by existing end-user customers and attract new customers. Our customers have no obligation to repeat purchases from us, and there can be no assurance that they will do so. We have had in the past, and may in the future, end-user customers discontinue using some of our products, which may impact such end-user customers’ decisions to continue to use any of our products.
If we cannot expand our end-user customers’ use of our products, maintain our repeat customer purchase rates and expand our customer base, our revenues may decline or fail to increase at historical growth rates, adversely affecting our business and operating results. In addition, if our customers experience dissatisfaction with our products in the future, we may find it more difficult to increase the use of our products within our existing end-user customer base, and it may be more difficult to attract new customers, or we may be required to grant credits or refunds, any of which could negatively impact our operating results and materially harm our business.
Our business is subject to the risks of earthquakes, fire, floods, and other natural catastrophic events and interruption byman-madeproblems such as power disruptions or terrorism.
Our corporate headquarters are located in the Greensboro, North Carolina area. Most of our third-party service providers are located in South Asia, a region known to suffer terrorism and natural disasters, including floods, typhoons, droughts, epidemics, or contagious diseases. A significant natural disaster, such as a fire or a flood, epidemic, or contagious disease, such as the COVID-19 pandemic, occurring at our headquarters or where our third-party service providers are located, could harm our business, operating results, and financial condition. In addition, acts of terrorism could cause disruptions in our business, the businesses of our customers and suppliers, or the economy as a whole. We also rely on information technology systems to communicate among our workforce, which is coordinated within our corporate headquarters in Greensboro, North Carolina. Any disruption to our internal communications, whether caused by a natural disaster, an epidemic or contagious disease, or by man-made problems, such as power disruptions, in the Greensboro, North Carolina area, Taiwan, Malaysia, Singapore, the Philippines, or where any of our customers are located could delay our research and development efforts, or cause delays or cancellations of customer orders.
Our use of open-source andnon-commercialsoftware components could impose risks and limitations on our ability to commercialize our products.
Our product development utilizes software modules licensed under open source and other types of non-commercial licenses. We also may incorporate open source and other licensed software into our product development in the future. However, the use and distribution of such software may entail more significant risks than third-party commercial software, as licenses of these types generally do not provide warranties or other contractual protections regarding infringement claims or the quality of the code. In addition, some of these licenses require the release of our proprietary source code to the public if we combine our proprietary product development software with open-source software in certain manners. This could allow competitors to create similar products with lower development effort and time and ultimately lose sales for us.
The terms of many open sources and other non-commercial licenses have not been judicially interpreted, and there is a risk that such licenses could be construed in a manner that could impose unanticipated conditions or restrictions on our ability to commercialize our products. In such event, to continue offering our products, we could be required to seek licenses from alternative licensors, which may not be available on a commercially reasonable basis or at all, to re-engineer our products or to discontinue the sale of our products in the event we cannot obtain a license or re-engineer our products on a timely basis, any of which could harm our business and operating results. In addition, if an owner of licensed software were to allege that we had not complied with the conditions of the corresponding license agreement, we could incur significant legal costs defending ourselves against such allegations. If such claims were successful, we could be subject to substantial damages, be required to disclose our source code, or be enjoined from the distribution of our products.
26
Table of Contents
Our reported financial results may be adversely affected by changes in accounting principles generally accepted in the UnitedStates.
GAAP is subject to interpretation by the Financial Accounting Standards Board (“FASB”), the SEC, and various bodies formed to promulgate and interpret appropriate accounting principles. A change in these principles or interpretations could have a significant effect on our reported operating results and financial condition and could affect the reporting of transactions already completed before the announcement of a change.
If our estimates or judgments relating to our critical accounting policies prove to be incorrect, our operating results could be adversely affected.
The preparation of consolidated financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. We base our estimates on historical experience, and other assumptions that we believe are reasonable under the circumstances. The results of these estimates form the basis for making judgments about the carrying values of assets, liabilities, and equity and the amount of revenues and expenses that are not readily apparent from other sources. Significant estimates and judgments involve derivatives and warrant liabilities and the valuation of equity financing. Our operating results may be adversely affected if our assumptions change or if actual circumstances differ from those in our assumptions, which could cause our operating results to fall below the expectations of securities analysts and investors, resulting in a decline in the trading price of our common stock.
Relations between the PRC andTaiwancould negatively affect our business and financial status and, therefore, the market value of your investment.
Taiwan has a unique international political status. The PRC does not recognize the sovereignty of Taiwan. Although significant economic and cultural relations have been established in recent years between Taiwan and the PRC, relations have often been strained. The government of the PRC has threatened to use military force to gain control over Taiwan in limited circumstances. A substantial portion of our manufacturing and packaging providers are located in Taiwan, and a material amount of our revenues are derived from the sales of our products manufactured and packaged in Taiwan. Therefore, factors affecting military, political, or economic conditions in Taiwan could have a material adverse effect on our results of operations.
A significant disruption in the operations of our manufacturing and packaging service providers inTaiwan, such as a tradewaror political unrest, could materially adversely affect our business, financial condition, and the results of operations.
Any disruption in the operations of our service providers in Taiwan or in their ability to meet our needs, whether as a result of a natural disaster or other causes, could impair our ability to operate our business on a day-to-day basis. Furthermore, since many of these third parties are located outside the U.S., we are exposed to the possibility of disruption and increased costs in the event of changes in the policies of the U.S. or foreign governments, political unrest, or unstable economic conditions in any of the countries where we conduct such activities. For example, a trade war could lead to higher tariffs. Any of these matters could materially and adversely affect our product sales and shipment timelines, business, and financial condition.
Risks Related to Regulatory Requirements
Government regulation may adversely affect our business.
The effects of regulation may materially and adversely impact our business. For example, the FCC’s regulatory policies relating to radio frequency emissions, consumer protection laws of the U.S. Federal Trade Commission, product safety regulatory activities of the U.S. Consumer Products Safety Commission, and environmental regulatory actions of the U.S. Environmental Protection Agency could impede sales of our products in the United States. In addition, our customers and we are also subject to various import and export laws and regulations. Should we fail to comply with these regulations, we may be unable to produce and deliver these products to specific customers, and we may become subject to investigations, sanctions, mandatory product recalls, enforcement actions, disgorgement of profits, fines, damages, civil and criminal penalties, or injunctions.
27
Table of Contents
Our business is also increasingly subject to complex foreign and U.S. laws and regulations, including but not limited to anti-corruption laws, such as the FCPA and equivalent laws in other jurisdictions, antitrust or competition laws, and data privacy laws, among others. In addition, foreign governments may impose tariffs, duties, and other import restrictions on components we obtain from non-domestic suppliers and export restrictions on products that we sell internationally. These tariffs, duties, or restrictions could materially and adversely affect our business, financial condition, and the results of operations.
New or revised environmental rules and regulations or other social initiatives could also impact our product or manufacturing standards. Those rules, or similar rules adopted in other jurisdictions, could adversely affect our costs, the availability of minerals used in our products, and our relationships with customers and suppliers.
We may incur substantial expenses related to regulatory requirements, and any regulatory compliance failure could cause our business to suffer.
The wireless communications industry is subject to ongoing regulatory obligations and reviews. Maintaining compliance with these requirements may result in significant additional expense to us, and any failure to maintain such compliance could cause our business to suffer.
Noncompliance with applicable regulations or requirements could also subject us to investigations, sanctions, mandatory product recalls, enforcement actions, disgorgement of profits, fines, damages, civil and criminal penalties, or injunctions. An adverse outcome in such litigation could require paying contractual damages, compensatory damages, punitive damages, attorneys’ fees, and other costs. These enforcement actions could harm our business, financial condition, and the results of operations. If any governmental sanctions are imposed, or if we do not prevail in any possible civil or criminal litigation, our business, financial condition, and results of operations could be materially adversely affected. In addition, responding to any action will likely result in a significant diversion of management’s attention and resources and increased professional fees.
We are subject to risks from international sales and operations.
We operate globally with sales personnel in multiple countries, and some of our business activities are concentrated in Asia. As a result, we are subject to regulatory, geopolitical, and other risks associated with doing business outside the U.S., including:
● global and local economic, social and political conditions and uncertainty;
● currency controls and fluctuations;
● disruptions in capital and securities and commodities trading markets;
Sales to customers located outside the U.S. accounted for approximately 42% of our revenue in 2025. We expect that revenue from international sales will continue to be a material part of our total revenue. Any weakness in these economies could decrease demand for products that contain our products, which could materially and adversely affect our business. The imposition by the U.S. of tariffs on goods imported from the PRC and other countries, countermeasures imposed by the PRC and other countries in response, U.S. export restrictions on sales of products to the PRC, and other government actions that restrict or otherwise adversely affect our ability to sell our products to customers in the PRC may have a material impact on our business, including our ability to sell products and to manufacture or source components.
28
Table of Contents
As a company with material sales outside of the U.S., our results may be affected by movements in currency exchange rates as we grow our sales network. In addition, our exposure may increase or decrease over time as our foreign business levels fluctuate in the countries where we may have sales or operations. These changes could have a material impact on our financial results. The functional currency for our current operations and international sales is the U.S. dollar; however, that may expand to other currencies as we grow.
Economic regulation in the PRC and other countries where we sell products could adversely impact our business and the results of operations.
A significant portion of our potential customer base is located in the PRC and other countries outside of the U.S. For many years, the Chinese economy has experienced periods of rapid growth and wide fluctuations in inflation. In response to these factors, the Chinese government has, from time to time, adopted measures to regulate growth and contain inflation, including currency controls and measures designed to restrict credit, control prices, or set currency exchange rates. Such actions in the future, as well as other changes in Chinese or other non-U.S. laws and regulations, including efforts in furtherance of reducing dependence on foreign semiconductor manufacturers, could increase the cost of doing business in other countries, foster the emergence of foreign competitors, decrease the demand for our products in those countries, or reduce the supply of necessary materials for our products, which could have a material adverse effect on our business and results of operations.
Changes in government trade policies, including the imposition of tariffs and export restrictions, have limited and could continue to limit our ability to sell or provide our products and other items to specific end-user customers, which may materially adversely affect our sales and the results of operations.
The U.S. and foreign governments have taken and may continue to take administrative, legislative, or regulatory action that could materially interfere with our ability to export, re-export, and transfer products and other items in certain countries, particularly in the PRC. For example, the imposition of tariffs has not had a direct, material adverse impact on our business; however, the direct and indirect effects of tariffs and other restrictive trade actions are difficult to measure and are only one part of economic and trade policy.
Furthermore, we have experienced and may continue to experience restrictions on our ability to export, re-export, and transfer our products and other items to specific foreign customers and suppliers where exports, re-exports, or transfers of products require export licenses or are prohibited by government action.
Even if such restrictions are lifted, any financial or other penalties or continuing export restrictions imposed on our customers could have a continuing negative impact on our future revenue and results of operations. In addition, other foreign end-user customers or suppliers affected by future U.S. government sanctions or threats of sanctions may respond by developing new solutions to replace our products or by adopting our foreign competitors’ solutions.
The imposition of additional tariffs by the U.S. government on a number of countries, and threat of trade wars against foreign countries/regions have created even more uncertainties in international trade which may affect our business. We cannot predict what further actions may ultimately be taken concerning tariffs or other trade measures between the U.S. and the PRC or other countries, what products or entities may be subject to such actions, or what steps may be taken by other countries in response.
The imposition of tariffs could increase costs of the end-user products we supply that we may not be able to pass on to our customers, which could in turn cause a decrease in the sales of our products and materially and adversely affect our business and results of operations. The loss of foreign customers or suppliers or the imposition of restrictions on our ability to sell or transfer products to such customers or suppliers due to tariffs, export restrictions, or other U.S. regulatory actions could materially and adversely affect our sales and business and the results of operations.
Our business couldbe affected by sanctions and export controls targeting Russia and other responses to Russia’
s invasion of Ukraine.
The Russia-Ukraine conflict may adversely affect Guerrilla RF’s business. Currently, we do not have any supply chain partners located in Russia or Ukraine. Nor do we have any pending product sales or product shipments to Russian customers or, to our knowledge, any entities listed on the U.S. Department of the Treasury Office of Foreign Assets Control Sectoral Sanctions Identifications List
. However, the related sanctions and other measures imposed by the European Union, the U.S., and other countries and organizations in response have led and may continue to lead, to disruption and instability in global markets, supply chains, and industries that could negatively impact our business, financial condition, and results of operations. We have taken steps to ensure our export control processes and controls observe enacted and evolving export sanctions imposed upon Russia, Belarus, and all restricted entities that have been identified by the United States government. Nevertheless, if we inadvertently make any product sales or shipments to Russian customers or any sanctioned entities, such non-compliance may have a material effect on our financial condition or operations.
Due to the unknown evolution of sanctions and export controls targeting the PRC and its ability to purchase and manufacture certain semiconductor chips, our business could be adversely affected.
On October 7, 2022, the U.S. Department of Commerce’s Bureau of Industry and Security ("BIS") announced a series of regulations – issued as an interim final rule – amending the Export Administration Regulations to enhance export controls on a range of goods, software, and technology and restrict the PRC’s ability to purchase and manufacture advanced computing chips. The regulations imposed new controls on items relating to advanced computer and semiconductor manufacturing capabilities, broadened end-use restrictions, expanded the scope of foreign-produced items subject to licensing requirements, and added to Entity List prohibitions. We do not anticipate these regulations will have a material effect on our financial condition or operations. The production of our high-performance MMICs is not reliant on any manufacturing in the PRC, or, to our knowledge, on any companies that are owned by the PRC or Chinese investors. In 2025, we received less than 1% of all our sales from customers located within the PRC. RF semiconductors, such as what we design and produce, are not currently covered under the BIS restrictions. We have taken steps to ensure our export control processes and controls observe enacted and evolving export sanctions imposed upon the PRC and all restricted entities that have been identified by the United States government. Nevertheless, if we inadvertently make any product sales or shipments to any sanctioned entities, such non-compliance may have a material effect on our financial condition or operations.
29
Table of Contents
We may be subject to theft, loss, or misuse of personal data by or about our employees, customers, or other third parties, which could increase our expenses, damage our reputation, or result in legal or regulatory proceedings.
In the ordinary course of our business, we have access to sensitive, confidential, or personal data or information regarding our employees and others that is subject to privacy and security laws and regulations. Therefore, the theft, loss, or misuse of personal data collected, used, stored, or transferred by us to run our business, or by our third-party service providers, including business process software applications providers and other vendors that have access to sensitive data, could result in damage to our reputation, disruption of our business activities, significantly increased business and security costs or costs related to defending legal claims.
Global and domestic privacy legislation, enforcement, and policy activity in this area are rapidly expanding and creating a complex regulatory compliance environment. For example, the European Union adopted the General Data Protection Regulation (“GDPR”), which requires companies to comply with rules regarding the handling of personal data, including its use, protection, and the ability of persons whose data is stored to correct or delete such data about themselves. Failure to meet GDPR requirements could result in penalties of up to 4% of worldwide revenue. In addition, the interpretation and application of consumer and data protection laws in the U.S., Europe, and elsewhere are often uncertain and fluid and may be interpreted and applied in a manner that is inconsistent with our data practices. As a result, complying with these changing laws has caused, and could continue to cause, us to incur substantial costs, which could harm our business and the results of operations. Further, failure to comply with existing or new rules may result in significant penalties or orders to stop the alleged non-compliant activity. Finally, even our inadvertent failure to comply with federal, State, or international privacy-related or data protection laws and regulations could result in audits, regulatory inquiries, or proceedings against us by governmental entities or others.
The semiconductor industry is heavily regulated. Therefore, any material changes in the political, economic, or regulatory semiconductor environment that affect the purchasing business or the purchasing practices and operations of organizations that utilize semiconductor industry products, or that lead to consolidation in our end-user customer industries, could require us to modify our products available to customers for purchase.
Our ability to grow will depend upon the economic environment of our end-user customer industries and our ability to increase the number of products that we sell to our customers. Our end-user customer industry bases often have different regulatory requirements, and they are subject to changing political, economic, and regulatory influences. As a result, changes in regulations affecting our end-user customers could require us to make unplanned modifications to our products, result in delays or cancellations of orders, or reduce demand for our products.
30
Table of Contents
RISKS RELATED TO OWNERSHIP OF OUR COMMON STOCK
The market price and trading volume of our common stock may be volatile and could decline.
The market price and trading volume of our common stock could fluctuate substantially due to a variety of factors, including market perception of our ability to meet our growth projections and expectations, quarterly operating results of other companies in the same industry, trading volume in our common stock, changes in general conditions in the economy and the financial markets or other developments affecting our business and the business of others in our industry. In addition, the stock market itself is subject to extreme price and volume fluctuations. This volatility has had a significant effect on the market price of securities issued by many companies for reasons related and unrelated to their operating performance and could have the same effect on our common stock. The market price of shares of our common stock could be subject to wide fluctuations in response to many risk factors listed in this section, and others beyond our control, including:
● the realization of any of the risk factors presented in this Annual Report;
● additions and departures of key personnel;
● failure to comply with the Sarbanes-Oxley Act or other laws or regulations;
● the performance and market valuations of other similar companies;
● speculation in the press or investment community;
● actual, potential or perceived control, accounting or reporting problems; and,
● changes in accounting principles, policies and guidelines.
In the past, securities class-action litigation has often been instituted against companies following periods of volatility in the market price of their shares. This type of litigation could result in substantial costs and divert our management’s attention and resources, which could have a material adverse effect on us.
Our common stock is quoted on an OTC Markets Group trading platform, the OTCQX, instead of a national exchange or quotation system. Accordingly, our investors may experience significant volatility in the market price of our stock and have difficulty selling their shares.
Our common stock is currently quoted on an OTC Markets Group trading platform, the OTCQX, under the ticker symbol “GUER.” The OTC Markets Group is a regulated quotation service that displays real-time quotes, last sale prices, and volume limitations in over-the-counter securities. Trading in shares quoted on an OTC Markets Group trading platform is often thin and characterized by volatility in trading prices. This volatility may be caused by a variety of factors, including the lack of readily available price quotations, the absence of consistent administrative supervision of bid and ask quotations, lower trading volume, and market conditions. As a result, there may be wide fluctuations in the market price of the shares of our common stock for reasons unrelated to operating performance, and this volatility, when it occurs, may have a negative effect on the market price for our securities. Moreover, the OTC Markets Group is not a stock exchange, and trading of securities on one of its trading platforms is often more sporadic than the trading of securities listed on a national quotation system or stock exchange. Accordingly, our stockholders may not be able to realize a fair price from their shares when they determine to sell them or may have to hold them for a substantial period of time until the market for our common stock improves.
31
We have issued shares of redeemable convertible preferred stock, and may in the future issue additional shares of preferred stock, with terms that could dilute the voting power or reduce the value of our common stock.
We are authorized to issue, without the approval of our stockholders, one or more series of preferred stock having such designation, powers, privileges, preferences, including preferences over our common stock respecting dividends and distributions, terms of redemption and relative participation, optional, or other rights, if any, of the shares of each such series of preferred stock and any qualifications, limitations or restrictions thereof, as our board of directors may determine. The terms of one or more series of preferred stock could dilute the voting power or reduce the value of our common stock. For example, the repurchase or redemption rights or liquidation preferences we could assign to holders of preferred stock could affect the residual value of our common stock.
In August 2024, we issued an aggregate of 22,000 shares of a newly established series of preferred stock designated as “Series A Convertible Preferred Stock, par value $0.0001 per share,” which have a stated value of $1,000 per share and are convertible into shares of common stock. Holders of shares of Series A Preferred Stock are entitled to vote on an as-converted basis with holders of shares of common stock. In addition, so long as North Run and its affiliates collectively beneficially own at least 20% of the Conversion Shares underlying the preferred shares issued in 2024, we may not, without the consent of North Run: create, authorize, or issue shares of capital stock that are senior or pari passu to the Series A Preferred Stock; incur aggregate indebtedness for borrowed money (subject to certain exceptions) in excess of $10.0 million; change our line of business; or amend, alter or repeal any provision of the Amended and Restated Certificate of Incorporation or bylaws in a manner that adversely affects the special rights, powers and preferences of the Series A Preferred Stock.
The Series A Preferred Stock ranks senior to the common stock as to distributions and payments upon the liquidation, dissolution and winding up of the Company, and holders of Series A Preferred Stock will participate with the holders of the common stock on an as-converted basis to the extent any dividends are declared on common stock. Holders of Series A Preferred Stock are also entitled to redemption rights under certain circumstances. The redemption rights and liquidation preferences assigned to holders of the Series A Preferred Stock, and any other repurchase or redemption rights or liquidation preferences we may assign to holders of preferred stock in the future, could affect the residual value of the common stock.
North Run and its affiliates’ ownership may limit or preclude other stockholders’ ability to influence corporate matters.
North Run and its affiliates held 41.3% of the voting power of our capital stock based on shares outstanding as of December 31, 2025. In addition, North Run may acquire additional shares of common stock and voting power upon exercise of their warrants. For as long as North Run and its affiliates hold a significant amount of our Series A Preferred Stock and common stock, they will be able to exert significant control over us. This concentrated control may limit or preclude other stockholders’ ability to influence corporate matters for the foreseeable future, including the election of directors, amendments of our organizational documents, and any merger, consolidation, sale of all or substantially all of our assets, or other major corporate transaction requiring stockholder approval. In addition, this may prevent or discourage unsolicited acquisition proposals or offers for our capital stock that stockholders may believe are in their best interest. North Run and its affiliates may also determine to sell substantial amounts of our securities in one or more transactions, including to one or several private parties in negotiated transactions. In that case, those buyers may subsequently be able to exert significant control over us.
32
Table of Contents
Because we became a reporting company under the Exchange Act by means other than a traditional underwritten initial public offering, we may not be able to attract the attention of research analysts at major brokerage firms.
Because we did not become a reporting company by conducting an underwritten initial public offering of our common stock, and because we are not listed on a national securities exchange, security analysts of brokerage firms may not provide coverage of our Company. In addition, investment banks may be less likely to agree to underwrite secondary offerings on our behalf than they might if we became a public reporting company by means of an underwritten initial public offering, because they may be less familiar with our Company as a result of more limited coverage by analysts and the media, and because we became public at an early stage in our development. The failure to receive research coverage or support in the market for our shares could have an adverse effect on our ability to develop a liquid market for our common stock.
We are an emerging growth company and a smaller reporting company, and any decision on our part to comply only with certain reduced reporting and disclosure requirements applicable to emerging growth companies and smaller reporting companies could make our common stock less attractive to investors.
We are an “emerging growth company,” as defined in the Jumpstart Our Business Startups ("JOBS") Act, and, for as long as we continue to be an emerging growth company, we may choose to take advantage of exemptions from various reporting requirements applicable to other public companies but not to emerging growth companies, including:
We could be an emerging growth company for up to five years. Our status as an emerging growth company will end as soon as any of the following takes place:
We cannot predict if investors will find our common stock less attractive if we choose to rely on any of the exemptions afforded emerging growth companies. If some investors find our common stock less attractive because we rely on any of these exemptions, there may be a less active trading market for our common stock and the market price of our common stock may be more volatile.
Under the JOBS Act, emerging growth companies can also delay adopting new or revised accounting standards until such time as those standards apply to private companies. We have elected to avail ourselves of this provision of the JOBS Act. As a result, we will not be subject to new or revised accounting standards at the same time as other public companies that are not emerging growth companies. Therefore, our consolidated financial statements may not be comparable to those of companies that comply with new or revised accounting pronouncements as of public company effective dates.
33
Table of Contents
We are also a “smaller reporting company” as defined in the Exchange Act. We may continue to be a “smaller reporting company” even after we are no longer an emerging growth company. We may take advantage of certain of the scaled disclosures available to smaller reporting companies and will be able to take advantage of these scaled disclosures for so long as our voting and non-voting common stock held by non-affiliates is less than $250 million measured on the last business day of our second fiscal quarter, or our annual revenues are less than $100 million during the most recently completed fiscal year and our voting and non-voting common stock held by non-affiliates is less than $700 million measured on the last business day of our second fiscal quarter.
We may face risks related to securities litigation that could result in significant legal expenses and settlement or damage awards.
We may in the future become subject to claims and litigation alleging violations of the securities laws or other related claims, which could harm our business and require us to incur significant costs. Significant litigation costs could impact our ability to comply with certain financial covenants under our credit agreement. We are generally obliged, to the extent permitted by law, to indemnify our current and former directors and officers who are named as defendants in these types of lawsuits. Regardless of the outcome, litigation may require significant attention from management and could result in significant legal expenses, settlement costs, or damage awards that could have a material impact on our financial position, results of operations, and cash flows.
Anti-takeover provisions in our charter documents and under Delaware law could make an acquisition of us, which may be beneficial to our stockholders, more difficult and may prevent attempts by our stockholders to replace or remove our current management.
Our certificate of incorporation and our bylaws contain provisions that could delay or prevent a change in control of our company. These provisions could also make it difficult for stockholders to elect directors who are not nominated by current members of our Board of Directors or take other corporate actions, including effecting changes in our management. These provisions:
● prohibit cumulative voting; and,
34
Table of Contents
In addition, our certificate of incorporation provides that the Court of Chancery of the State of Delaware will be the exclusive forum for: any derivative action or proceeding brought on our behalf; any action asserting a breach of fiduciary duty; any action asserting a claim against us arising pursuant to the Delaware General Corporation Law ("DGCL"), our certificate of incorporation, or our bylaws; or any action asserting a claim against us that is governed by the internal affairs doctrine.