Skip to content
KStart free
AI InfrastructureDefenseQuantumAll studies →

CODX US Equity

Co-Diagnostics, Inc.Health Care · Surgical & Medical Instruments & Apparatus · CIK 1692415 · FY ends Dec 31
$1.21
+0.06 (+5.22%)
USD · as of 2026-08-21 · marketstack

CODX · 10-K · period ended 2021-12-31

← all CODX documents
filed 2022-03-24 · EDGAR original ↗

Our rendering of the filing — original pagination and typography are not reproduced, and tables are reduced to their short label cells (the figures live on FA). Nothing is summarized: every line below is the filing's own text.

blocks 1600 of 2,148162k characters rendered

UNITED

STATES

SECURITIES

AND EXCHANGE COMMISSION

Washington,

D.C. 20549.

Form

10-K

(Mark

One)

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For

the fiscal year ended December 31, 2021

OR

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For

the transition period from_______to_______

Commission

File Number 001-38148

CO-DIAGNOSTICS,

INC.

(Exact

Name of Registrant as Specified in Its Charter)

2401

S. Foothill Drive, Salt Lake City, Utah84109

(Address

of principal executive offices and zip code)

(801)438-1036

(Registrant’s

telephone number including area code)

Securities

registered pursuant to Section 12(b) of the Act:

Title of each class Trading Symbol(s) Name of each exchange on which registered

Common Stock CODX The Nasdaq Capital Market

Securities

registered pursuant to Section 12(g) of the Act: None

Indicate

by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No

Indicate

by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No

Indicate

by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act of 1934

during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject

to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate

by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data

File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding

12 months (or such shorter period that the registrant was required to submit and post such files). Yes ☒ No ☐

Indicate

by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting

company or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller

reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☐ Accelerated filer ☐

Non-accelerated filer ☐ Smaller reporting company ☒

Emerging growth company ☒

If

an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying

with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate

by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness

of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered

public accounting firm that prepared or issued its audit report.☐

Indicate

by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The

aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which

the common stock was last sold as of the last business day of the registrant’s most recently completed second fiscal quarter was

approximately $229,000,000.

As

of March 23, 2022, there were 33,965,318shares of common stock, par value $0.001

per share, outstanding.

Table

of Contents

Page

PART I

Item 1. Business. 4

Item 1A. Risk Factors. 13

Item 1B. Unresolved Staff Comments. 16

Item 2. Properties. 16

Item 3. Legal Proceedings. 16

Item 4. Mine Safety Disclosures. 17

PART II

Item 6. [Reserved.] 18

Item 7A. Quantitative and Qualitative Disclosures About Market Risk. 22

Item 8. Financial Statements and Supplementary Data. 23

Item 9A. Controls and Procedures. 44

Item 9B. Other Information. 45

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections. 45

PART III

Item 10. Directors, Executive Officers and Corporate Governance. 45

Item 11. Executive Compensation. 50

Item 14. Principal Accountant Fees and Services. 56

PART IV

Item 15. Exhibits and Financial Statement Schedules. 56

PART

I

Forward-Looking

Statements

This

Annual Report on Form 10-K contains “forward-looking statements” that involve risks and uncertainties. All statements other

than statements of historical fact contained in this Annual Report and the documents incorporated by reference herein, including statements

regarding future events, our future financial performance, business strategy, and plans and objectives of management for future operations,

are forward-looking statements. We have attempted to identify forward-looking statements by terminology including “anticipates,”

“believes,” “can,” “continue,” “could,” “estimates,” “expects,”

“intends,” “may,” “plans,” “potential,” “predicts,” “should,”

or “will” or the negative of these terms or other comparable terminology. Although we do not make forward looking statements

unless we believe we have a reasonable basis for doing so, we cannot guarantee their accuracy. These statements are only predictions

and involve known and unknown risks, uncertainties and other factors and the documents incorporated by reference herein, which may affect

our or our industry’s actual results, levels of activity, performance or achievements expressed or implied by these forward-looking

statements. Moreover, we operate in a highly regulated, very competitive, and rapidly changing environment. New risks emerge from time

to time and it is not possible for us to predict all risk factors, nor can we address the impact of all factors on our business or the

extent to which any factor, or combination of factors, may cause our actual results to differ materially from those contained in any

forward-looking statements.

We

have based these forward-looking statements largely on our current expectations and projections about future events and financial trends

that we believe may affect our financial condition, results of operations, business strategy, short term and long-term business operations,

and financial needs. These forward-looking statements are subject to certain risks and uncertainties that could cause our actual results

to differ materially from those reflected in the forward-looking statements. Factors that could cause or contribute to such differences

include, but are not limited to, those discussed in this Annual Report, and in particular, the risks discussed below and under the heading

“Risk Factors” in other documents we file with the SEC. The following discussion should be read in conjunction with the consolidated

financial statements for the fiscal years ended December 31, 2021 and 2020 and notes incorporated by reference therein. We undertake

no obligation to revise or publicly release the results of any revision to these forward-looking statements, except as required by law.

In light of these risks, uncertainties and assumptions, the forward-looking events and circumstances discussed in this Annual Report

may not occur and actual results could differ materially and adversely from those anticipated or implied in the forward-looking statement.

You

should not place undue reliance on any forward-looking statement, each of which applies only as of the date of this Annual Report. Except

as required by law, we undertake no obligation to update or revise publicly any of the forward-looking statements after the date of this

Annual Report to conform our statements to actual results or changed expectations.

You

are advised, however, to consult any further disclosures we make on related subjects in our reports on Forms 10-Q, 8-K and 10-K filed

with the SEC. You should understand that it is not possible to predict or identify all risk factors. Consequently, you should not consider

this list to be a complete set of all potential risks or uncertainties.

Important

factors that could cause actual results to differ materially from those in the forward-looking statements include, without limitation:

● the results of clinical trials and the regulatory approval process;

● market acceptance of any products that may be approved for commercialization;

● our ability to protect our intellectual property rights;

● the impact of any infringement actions or other litigation brought against us;

● competition from other providers and products;

● changes in government regulation;

Should

one or more of these risks or uncertainties materialize, or should the underlying assumptions prove incorrect, actual results may differ

significantly from those anticipated, believed, estimated, expected, intended or planned.

Factors

or events that could cause our actual results to differ may emerge from time to time, and it is not possible for us to predict all of

them. We cannot guarantee future results, levels of activity, performance or achievements. Except as required by applicable law, including

the securities laws of the United States, we do not intend to update any of the forward-looking statements to conform these statements

to actual results.

As

used in this Annual Report, the terms “we”, “us”, “our”, “Company” and “Co-Diagnostics”

means Co-Diagnostics, Inc., a Utah corporation and its consolidated subsidiaries (the “Company”), unless otherwise indicated.

ITEM

1: BUSINESS

Overview

Co-Diagnostics,

Inc., a Utah corporation (the “Company” or “CODX”), develops, manufactures and sells reagents used for

diagnostic tests that function via the detection and/or analysis of nucleic acid molecules (DNA or RNA), including robust and innovative

molecular tools for detection of infectious diseases, liquid biopsy for cancer screening, and agricultural applications. In connection

with the sale of our tests we may sell diagnostic equipment from other manufacturers as self-contained lab systems (which we refer to

as the “MDx Device”). We have also developed a unique, groundbreaking portable PCR device (the “CODX YourTest

PCRTM Device”) that has been designed to bring affordable, reliable gold-standard polymerase chain reaction (“PCR”)

to patients in point-of-care and even at-home settings.

Our

diagnostics systems enable dependable, low-cost, molecular testing for organisms and genetic diseases by automating historically complex

procedures in both the development and administration of tests. CODX’s technical advance involves a novel, patented approach

to PCR test design of primer and probe structure (“CoPrimersTM”) that eliminates one of the key vexing issues

of PCR amplification, the exponential growth of primer-dimer pairs (false positives and false negatives) which adversely interferes with

identification of the target DNA/RNA.

We

believe our proprietary molecular diagnostics technology is paving the way for innovation in disease detection and life sciences research

through our enhanced detection of genetic material. For various reasons, including owning our own our platform, we believe we will be

able to accomplish this faster and more economically, allowing for significant margins while still positioning the Company to be a low-cost

provider of molecular diagnostics and screening services.

In

addition, continued development has demonstrated the unique properties of our CoPrimer technology that we believe makes it ideally suited

for a variety of applications where specificity is key to optimal results, including multiplexing several targets, enhanced Single Nucleotide

Polymorphism (“SNP”) detection and enrichment for next generation sequencing.

Our

scientists use the complex mathematics of DNA/RNA test design to engineer and optimize DNA/RNA tests and to automate algorithms that

rapidly screen millions of possible options to pinpoint the optimum design. Dr. Brent Satterfield, our founder, developed the Company’s

intellectual property consisting of the predictive mathematical algorithms and patented molecular structure used in the testing process,

which together represent a major advance in PCR testing systems. CODX technologies are now protected by more than 20 granted or pending

US and foreign patents, as well as certain trade secrets and copyrights. Ownership of our proprietary platform permits us the advantage

of avoiding payment of patent royalties required by other PCR test systems, which may allow the sale of diagnostic PCR tests at a lower

price than competitors, while enabling us to maintain profit margins.

We

may either sell or lease the MDx Device to labs and diagnostic centers, through sale or lease agreements, and sell the reagents that

comprise our proprietary tests to those laboratories and testing facilities.

Our

proprietary test design process involves identifying the optimal locations on the target genes for amplification and pair the locations

with the optimized primer and probe structure to achieve outputs that meet the design input requirements identified from market research.

This is done by following planned and documented processes, procedures and testing. In other words, we use the data resulting from our

tests to verify whether we succeeded in designing what we intended at the outset. Verification is a series of testing that concludes

that the product is ready to proceed to validation in an evaluation either in our laboratory or in an independent laboratory setting

using initial production tests to confirm that the product as designed meets the user needs.

Using

our proprietary test design system and proprietary reagents, we have designed and obtained regulatory approval in the European Community

and/or in India to sell PCR diagnostic tests for the detection of COVID-19, influenza, tuberculosis, hepatitis B and C, human papillomavirus,

malaria, chikungunya, dengue, and the zika virus. In the United States, CODX has obtained Emergency Use Authorization (“EUA”)

for its Logix SmartTM COVID-19 detection test from the Food and Drug Administration,

or FDA, and sells that test to qualified labs. In addition, our COVID-19 detection test and certain of our other suite of COVID-19 products

have been approved for sale in countries such as the United Kingdom, Australia and Mexico by the regulatory bodies in those countries

and have been registered for sale in many more countries.

In

addition to testing for infectious disease, the technology lends itself to identifying any section of a DNA or RNA strand that describe

any type of genetic trait, which creates a number of significant applications. We, in conjunction with our customers, are active in designing

and licensing tests that identify genetic traits in plant and animal genomes. We also have three multiplexed tests developed to test

mosquitos for the identification of diseases carried by the mosquitos to enable municipalities to concentrate their efforts in managing

mosquito populations on the specific areas known to be breeding the mosquitos that carry deadly viruses.

On

January 23, 2020, we announced the completion of the principal design work for a PCR test for the new coronavirus, later named COVID-19,

intended to address the potential need for detection of the virus. This test features the Company’s patented CoPrimer technology,

and was designed using our proprietary software system, following the guidelines published by the World Health Organization (WHO) and

Centers for Disease Control (CDC).

On

February 24, 2020, we announced that this test had obtained regulatory clearance to be sold as an IVD for the diagnosis of COVID-19 in

markets that accept CE-marking as valid regulatory approval, and became available for purchase from the Company’s Utah-based ISO-13485:2016

certified facility—the first US-based company to obtain such a marking for a COVID-19 test.

We

commenced sales of the COVID-19 tests in February and March of 2020 to international customers and to date have since sold over 30,000,000

of this and other COVID tests in numerous countries around the world through an expanding distributor network.

On

April 6, 2020, we announced that we had received an Emergency Use Authorization from the FDA allowing us to commence sales of our Logix

SmartTM COVID-19 test to laboratories certified by the Center for Medicare and Medicaid Services under the Clinical Laboratories

Improvements Act (“CLIA”) to accept human samples for diagnostics testing throughout the United States and have sold our

Logix SmartTM COVID-19 test to such CLIA labs since that time.

Because

we believe that testing for COVID-19 is going to be a consideration for public health worldwide even after the current pandemic has subsided,

we have initiated the Eikon platform to facilitate frequent testing in homes, schools, businesses, and the hospitality industry. We believe

this may be accomplished through the development of a low-cost testing device, easy to use by non-professionals, that can provide PCR

test results in around 30 minutes. The initial project built on this platform, an at-home and point-of-care COVID-19 PCR test, was ultimately

facilitated by our development of a saliva or nasal swab-based PCR test that does not require the RNA/DNA extraction. While the final

result is believed to be approximately equivalent to those processed by a high-complexity clinical laboratory, it has the advantages

of increased speed and ease of handling thanks to lyophilization (or freeze-drying) of our testing reagents to allow for stability at

room temperatures.

On

February 15, 2021, we engaged the services of a group of professionals at Idaho Molecular, Inc and Advanced Conceptions, Inc (the “Entities,”)

with the expertise to develop the hardware for such a device using our CoPrimersTM as the reagent chemistry. On December

22, 2021, we announced that we would be acquiring the Entities along with all existing and future assets and intellectual property related

to the platform and device. It is expected that the device and test will be available to homes, schools, offices, and the travel industry

among other locations at a cost that will allow screening frequently to prevent spread of the COVID-19 virus in the future. The device

would also be available to test for other pathogens detectable through saliva or other samples as we develop those tests and offer them

to the marketplace. All such tests will be subject to regulatory approval.

Infectious

Disease Product Offering

Using

our proprietary test design system and proprietary reagents, we and CoSara Diagnostics Pvt Ltd (“CoSara”), our joint venture

for manufacturing in India, design and sell PCR diagnostic tests for detection of diseases and pathogens such as COVID-19, tuberculosis,

hepatitis B and C, malaria, dengue, human papillomavirus, chikungunya, and Zika virus, all of which tests have been designed and verified

in our laboratories. Our tuberculosis test and Zika test received a CE Mark in 2018, and a triplex test for Zika, dengue and chikungunya

received a CE Mark in 2019, qualifying the tests to be sold throughout the European community and in most countries in central and South

America. In December, 2019, CoSara received a license to manufacture and sell tuberculosis, hepatitis B, hepatitis C, human papillomavirus

16/18 and malaria tests in India from the Central Drugs Standard Control Organization (“CDSCO”). In February 2020, we received

a CE Mark for our Logix SmartTM COVID-19 test followed by an Emergency Use Authorization by the FDA a few weeks later, and

in April 2020, our COVID-19 test was approved for manufacture and sale in India by the CDSCO and in Mexico by the INDRE, Mexico’s

equivalent to the United States Center for Disease Control. In August 2020, we received approval from the Australian Department of Health

Therapeutic Goods Division to sell our COVID-19 test in Australia. Other regulatory approvals and registrations followed those listed

here.

As

explained above, our Logix SmartTM COVID-19 test was designed, developed, submitted for regulatory approval and ready to be

used as an IVD in countries that accept a CE Mark as approval for use of the test in a period of just over 30 days. This is a real-world

example of how the CODX technology can be used in an evolving epidemic to get diagnostic tools in the hands of medical professionals

without delay. It can be similarly used to design a test for mutated strains of the virus should they not be detectable using currently

available tests.

Caribbean

and Central and South America

Our

initial sales were to entities located in South and Central America. In some of those countries, there are limited regulatory hurdles

so we started offering our tests immediately. We have applied for and received registrations for our tests in many of those countries

that require registration, and our distributors in those countries have provided us with in country assistance in completing such registrations.

We

first offered our Zika test in this region because of the demand for such a test, followed by tests for tuberculosis, our triplex test

for Zika, chikungunya, and dengue. Sales of those tests have not been material, but with the granting of a CE mark for our Logix SmartTM

COVID-19, we began significant sales in this region. Products are manufactured for sale upon receipt of purchase orders from distributors,

labs and hospitals.

India

In

January 2017, the Company entered into an agreement to manufacture diagnostics tests for seven infectious diseases with a pharmaceutical

manufacturing company in India and formed an Indian joint venture organized as CoSara Diagnostics, Pvt Ltd (“CoSara”). The

agreement provided for the construction of a manufacturing plant and the manufacture of the tests named above and the joint sales and

marketing of those tests in India. We have received a license for the plant in Ranoli, India to manufacture approved tests and is being

used for testing and manufacturing of our products for the Indian market.

As

mentioned above, the CDSCO has given us the approval for manufacture and sale of the nine tests referred above and the Company has begun

manufacture and sale of those tests. The Company has commenced a reagent rental program in India with thermocyclers purchased from third-party

vendors and which we refer to as our MDx Device. Each of the reagent rental placements requires the purchase of a minimum number of tests

per month. The placement of thermocyclers in India has facilitated the sale of the SaraGene COVID-19 tests in India. The World Health

Organization (“WHO”) 2019 Global Tuberculosis Report indicates that India is the country with the highest number of cases

of tuberculosis in the world. WHO tuberculosis statistics for India for 2018 give an estimated incidence figure of 2.69 million cases

of tuberculosis for India out of a global incidence of approximately 10.0 million.

On

March 19, 2020, we announced that CoSara received authorization to begin manufacture and sale of COVID-19 tests in India. Those tests

in India are branded as SaraGene COVID-19 tests and are sold exclusively by CoSara. The Indian government places restrictions on the

price that could be charged for COVID-19 tests which has limited the revenue in India more than we have experienced in other parts of

the world. At the time of this report, CoSara has received CDSCO clearance for RT-PCR tests for Mycobacterium tuberculosis, malaria,

hepatitis B, hepatitis C, human papillomavirus (HPV), two COVID-19 assays, chikungunya, dengue, a dengue/chikungunya duplex test, and

an influenza A/influenza B/COVID-19 (“ABC”) multiplex test.

Europe

Molecular

diagnostics, such as our tests, are governed in Europe by the framework for in vitro diagnostics (IVDs), which encompasses diagnostic

products such as reagents, instruments and systems intended for use in diagnosis of disease. The regulatory system for some IVDs allows

for a self-certification procedure, placing heavy responsibility on manufacturers. Non self-certified products are subject to the same

standards as self-certified products but are also subject to audit and review by a notified body prior to receiving approval to be CE-marked.

A CE-marking is a manufacturer’s declaration that a product meets the requirements of the applicable European Commission directive.

Examples of current obligations include having in place a qualitative manufacturing process, user instructions that are clear and fit

for purpose, and ensuring that the ‘physical’ features of devices and diagnostics do not pose any danger. If a product fulfils

these and other related control requirements, it may be CE-marked as an indication that the product is compliant with EU legislation

and sold in the European Union. We have received CE Marks for six of our tests including for COVID-19, COVID-19 (2 gene test), ABC (a

triplex test for Flu A, Flu B and COVID-19), a DS (Direct Saliva, extraction-free) COVID-19 test, tuberculosis, Zika, and our Zika, dengue,

chikungunya triplex tests.

We

are ISO 13485:2016 certified, relating to the design and manufacture of our medical device products. The ISO certification indicates

that we meet the standards required to self-certify certain of our products and affix a CE-marking for sales of our products in countries

accepting the CE marking (not in the United States) with only minimal further governmental approvals and registrations in most countries.

United

States

The

U.S. Food and Drug Administration (FDA) has granted permission for us to export all of our IVD products. The FDA’s permission to

export was granted under Section 801(e) of the Federal Food, Drug, and Cosmetic Act, as amended (the “FDC Act”). Section

801(e) of the FDA Act covers certain medical devices that have not yet received an approved Premarket Approval in the United States by

the FDA, such as our products. We have not commenced any Premarket Approval steps with the FDA. Section 801(e) of the FDA Act applies

to medical devices that are acceptable to the importing country and that are manufactured under the FDA’s Good Manufacturing Practices.

We have received EUA for our COVID-19 test, which allows sales to qualified labs in the United States.

Under

our EUA, we are actively selling our Logix SmartTM COVID-19 test to CLIA certified laboratories in the United States and

the CLIA labs are able to use our test as it is or further validate our COVID-19 or other tests as Laboratory Developed Tests (LDTs),

which refers to a diagnostic test that has been validated for use in the CLIA lab. LDTs may be used by the lab only in that laboratory.

CLIA laboratories develop the performance characteristics, perform the analytical validation for their LDTs and obtain licenses to offer

them as diagnostic services. The FDA has publicly announced its intention to regulate certain LDTs in a phased-in approach, but draft

guidance that was published a couple of years ago was withdrawn at the end of the Obama administration and replaced by an informal non-enforceable

discussion paper reflecting some of the feedback that it received on LDT regulation. We are currently marketing our Logix SmartTM

COVID-19 test to CLIA laboratories throughout the US.

Market

Opportunity

The

market opportunity for our tests changed radically with the emergence of the COVID-19 pandemic. Because we were able to respond rapidly

and produce a quality product, we have been able to build a distribution network that extends to

more than 80 countries with over 50 active distributors, most of which have been the sales network that has allowed us to export products

throughout the world. We believe that after the pandemic is brought under control, the network of distributors that we have built

in these extra-ordinary times will serve us well in sales of other diagnostic tests.

The

molecular diagnostics market is a fast-growing portion of the in vitro (test tube-based, controlled environment) diagnostics market.

There are several advantages of PCR tests, such as the ones we market and sell, over other forms of diagnostic testing. These advantages

include higher specificity and sensitivity, the ability to perform multiplex tests and the ability to test for drug resistance or for

individual genes.

Mosquito

Vector Control Services

In

response to market demand, we introduced our first diagnostics tests to be used exclusively to test for mosquito borne pathogens in June

2019. Municipalities in the US and many other countries in the world are concerned about the diseases carried by mosquitos and which

infect the human population. To prevent outbreaks of potentially harmful viruses, such as Zika or West Nile, from infecting the public

the municipalities conduct mitigation operations to eliminate the mosquito populations carrying the diseases. Because it is too expensive

and potentially harmful to the environment to spray all mosquito breeding areas, the solution is to identify which particular area has

mosquitos that are carrying the harmful viruses. To know where the host mosquitos with the harmful viruses are located, traps are set,

mosquitos collected and then tested to find the areas that most needed spraying. There are over 3,000 mosquito abatement districts throughout

the United States and almost all of them conduct testing to help make the spraying more effective.

Our

first vector related test was a triplex test that tests for West Nile, western equine and St. Louis encephalitis. We began shipping the

tests in June 2019. We added a second test that tests mosquitos for Zika, chikungunya and dengue in a triplex test. Finally, in November

2019, we completed a test for West Nile, eastern equine and St. Louis encephalitis, specifically for use in the eastern United States.

As a result, mosquito abatement districts can test for three target viruses in one test as compared to performing three different tests

using other market available tests, which saves our customers money. Additionally, the districts are more effective because they can

get test results in a matter of hours using our product instead of weeks when they might otherwise have to wait for a central lab to

process the mosquito tests.

We

have sold our Vector Smart test products and/or related lab equipment to testing districts in different sections of the country and are

marketing our products through trade shows, electronic and regular mail solicitations.

Competitive

Advantages of Co-Diagnostics

We

believe that we have the following competitive advantages:

● Affordability: Lower-cost test kits and low-cost MDx-device.

Liquid

Biopsy for Cancer Screening

The

enhanced specificity of our technology opens up some unique applications for liquid biopsy, demonstrating its ability to detect small

quantities of mutations associated with cancer within an environment of large amounts of normal DNA, as we position the Company to take

part in this historic and challenging development in human health care.

Agricultural

Applications

SNP

detection is also used in the agricultural industry to identify variations in crop genomes to achieve improved seed viability and other

desired characteristics, including drought resistance, disease resistance, pest resistance and higher yield.

In

mid-2017, the Company was first approached by a large agribusiness to evaluate our ability to multiplex certain target genomes. The results

of the development project have successfully demonstrated our ability to not only multiplex the target genomes, but targeted SNP’s

as well. The project was undertaken in conjunction with the manufacturer of our CoPrimer tests. The results of the project encouraged

the parent of our manufacturer to seek a world-wide licensing arrangement for our CoPrimersTM in the agricultural industry,

which was completed in October 2018. Pursuant to the exclusive license for the agronomics industry, the licensee pays us a royalty for

all CoPrimersTM sold to the licensee’s customers. In January 2019, the licensee formally introduced the product at

a large agricultural conference and has branded the product under the name “BHQ CoPrimersTM”.

Additional

Licensing and Assay Development

In

addition, the unique properties of our CoPrimer technology make them ideally suited to a variety of applications where sensitivity is

key to optimal results, including multiplexing several targets, enhanced SNP detection and enrichment for next generation sequencing.

Our licensee for our agricultural testing requested an expansion of our license agreement to include test design services for their customers

and potential customers, both in the infectious disease arena as well as for agricultural customers. The license was amended in July

2019 and we expect to derive a license fee from our licensee for its design services. If any of its customers desire to commercialize

the tests designed, they will need to seek a commercial license directly from us. Because of these unique characteristics of CoPrimersTM,

research companies and institutions have requested that we design diagnostics to locate and identify uncommon gene sequences and

SNPs and create tests for the target sequences in a multiplexed reaction. This application of our technology is in its beginning stages,

but we believe that the results from our initial research indicate a significant step forward in defining the capabilities of our technology,

which we believe can be translated to revenue producing licensing arrangements.

Intellectual

Property

Because

much of our future success and value depends on our proprietary technology, our patent and intellectual property strategy is of critical

importance. Five of our initial U.S. patents related to our technology have been granted by the U.S. Patent and Trademark Office (PTO),

including the patent for our CoPrimer technology, which we consider our most important patent. One of our patents has been issued in

Great Britain but still pending in the United States, and another has been granted in South Korea. As of March 2022, we have an issued

patent in Great Britain and India on “Rapid Oligo Probes.” We also have an issued patent in the U.S. on “Primers for

Nucleic Acid Extension or Amplification Reactions.” We have another issued patent in the U.S. on “Detection of Primers for

Nucleic Acid Extension or Amplification Reactions.” We have 3 patents issued in the US, as well as patents issued in Australia,

Korea, and Mexico on “Cooperative Primers, Probes, and Applications Thereof.” We have applications pending in Australia,

Canada, Europe, and the U.S. for “Methods and Compositions for Next Generation Sequencing (NGS) Library Preparation.” We

have applications pending in the U.S. and internationally as a PCT application for “Allele-Specific Design of Cooperative Primers

for Improved Nucleic Acid Variant Genotyping.” Lastly, we have a provisional application on file in the U.S. for “Methods

and Compositions Related to Cooperative Primers and Reverse Transcription.

We

have identified additional applications of the technology, which represent potential patents that further define specific applications

of the processes that are covered by the original patents. We intend to continue building our intellectual property portfolio as development

continues and resources are available.

We

have copyrighted our development software that is used by us to develop diagnostic tests based on our technology.

Major

Customers

We

had certain customers which were each responsible for generating 10% or more of our total revenue for the year ended December 31, 2021.

Two customers together accounted for approximately 48% of total revenue for the year ended December 31, 2021. These customers may not

account for the same percentage of sales in future periods. If

we were to sell nothing to those customers in the future, it would have a material adverse effect on our financial condition unless we

were able to replace those customers with others.

Competition

The

molecular diagnostics industry is extremely competitive. There are many firms that provide some or all of the products we provide and

provide many diagnostic tests that we have yet to develop. Many of these competitors are larger than us and have significantly greater

financial resources. Because are more recently established, many of our competitors have a competitive advantage in the diagnostic testing

industry because they also have other lines of business in the pharmaceutical industry from which they derive revenues and for which

they are well known and respected in the medical profession. We will need to overcome the disadvantage of being perceived as a start

up with no significant respect from the medical and testing professionals, although this is changing as we continue to market our Logix

SmartTM COVID-19 tests and other tests in the United States to well-known and successful laboratories. In the diagnostic

testing industry, we compete with such companies as BioMerieux, Siemens, Qiagen, Cue Health, Lumira Dx and Cepheid and with such pharmaceutical

companies as Abbott Laboratories, Becton Dickinson and Johnson and Johnson.

Many

of these competitors already have an established customer base with industry standard technology, which we must overcome to be successful.

Competition

is, and will likely continue to be, particularly intense in the market for COVID-19 diagnostic tests. Numerous companies in the United

States and internationally have announced their intention to offer new products, services and technologies that could be used in substitution

for our Logix SmartTM COVID-19 tests. Many of those competitors are significantly larger, and have substantially greater

financial, engineering and other resources, than our company. Existing and potential competitors in the market for COVID-19 diagnostic

tests include developers of serological, antigen and molecular tests. We also compete with companies from Asia in certain markets who

are willing to sell their tests for much less than we sell our tests, which creates competitive price pressure on us.

We

expect competition to continue to increase as other established and emerging companies enter the market, as customer requirements evolve,

and as new products, services and technologies are introduced. The entrance of new competitors is being encouraged by governmental authorities,

who are offering funding to support development of testing solutions for COVID-19. Some of our existing or new competitors may have strong

relationships with current and potential customers, including governmental authorities, and, as a result, may be able to respond more

quickly to new or changing regulatory requirements, new or emerging technologies, and changes in customer requirements.

Government

Regulation

In

the United States, we are regulated by the FDA and our products must be approved, cleared, or authorized by the FDA before we are allowed

to sell our tests in the United States as in vitro diagnostics. The FDA granted us an EUA to manufacture and sell our Logix SmartTM

COVID-19 test to CLIA labs in the United States. Being ISO certified greatly facilitates our applications for CE-Marking, which allows

us to sell any CE Marked test in most countries in Europe, South America and Asia, depending on the country and following that country’s

registration process. We currently have CE Markings issued for our Logix SmartTM COVID-19 test, tuberculosis test, our Zika

virus test, a triplex test that tests for Zika, dengue, and chikungunya simultaneously, a triplex “ABC” test that identifies

and distinguishes between Flu A, Flu B and Covid-19, our SARS-CoV-2 2-gene multiplex test, and our DS (Direct Saliva, extraction-free)

COVID-19 test. In addition, our Logix SmartTM COVID-19 has received the license to manufacture and sell in India from India’s

CDSCO and the National Epidemiology Institute in Mexico evaluated our Logix SmartTM COVID-19 and ABC tests and approved them

for sale in Mexico. We have also received approval to sell in Australia. We are in the process of registering for sale our Logix SmartTM

COVID-19 and other tests in a number of major countries around the world.

Employees

As

of December 31, 2021, we had 101 full-time and part-time employees at our executive offices and lab facilities in Salt Lake City, Utah.

We have engaged independent contractors in India to promote the use of our products and develop outlets for products and employ the services

of independent sales representatives on an “as needed” basis.

Organizational

History and Corporate Information

We

were incorporated as Co-Diagnostics, Inc., in Utah on April 18, 2013. Our principal executive office is located 2401 S. Foothill Drive,

Salt Lake City, Utah 84109. Our telephone number is (801) 438-1036. Our web address is www.codiagnostics.com. The contents of

our website are not incorporated by reference in this Annual Report.

Implications

of Being an Emerging Growth Company

We

are an “emerging growth company,” as defined in the Jumpstart Our Business Startups Act of 2012. We will remain an emerging

growth company until the earlier of (i) the last day of the fiscal year following the fifth anniversary of July 12, 2017, the date of

the first sale of our common stock pursuant to an effective registration statement under the Securities Act of 1933, as amended (the

“Securities Act”); (ii) the last day of the fiscal year in which we have total annual gross revenues of $1 billion or more;

(iii) the date on which we have issued more than $1 billion in nonconvertible debt during the previous three years; or (iv) the date

on which we are deemed to be a large accelerated filer under applicable SEC rules. We expect that we will remain an emerging growth company

for the foreseeable future, but cannot retain our emerging growth company status indefinitely. We refer to the Jumpstart Our Business

Startups Act of 2012 herein as the “JOBS Act”. For so long as we remain an emerging growth company, we are permitted and

intend to rely on exemptions from specified disclosure requirements that are applicable to other public companies that are not emerging

growth companies. These exemptions include:

● reduced disclosure obligations regarding executive compensation; and

For

as long as we continue to be an emerging growth company, we expect that we will take advantage of the reduced disclosure obligations

available to us as a result of that classification. Accordingly, the information contained herein may be different than the information

received from other public companies.

An

emerging growth company can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act for

complying with new or revised accounting standards. This allows an emerging growth company to delay the adoption of certain accounting

standards until those standards would otherwise apply to private companies. We have irrevocably elected to avail ourselves of this extended

transition period and, as a result, we will not be required to adopt new or revised accounting standards on the dates on which adoption

of such standards is required for other public reporting companies.

We

are also a “smaller reporting company” as defined in Rule 12b-2 of the Securities Exchange Act of 1934, as amended, or the

Exchange Act, and have elected to take advantage of certain of the scaled disclosure available for smaller reporting companies.

ITEM

1A. RISK FACTORS

Risks

Related to Our Business and Industry

We

have a limited commercial history upon which to base our prospects and are not certain

that we will sustain profitability in the future.

We

began operations in April 2013, and we have a limited operating history. We were profitable for the years ended December 31, 2021 and

2020, respectively. Our accumulated retained earnings were $54.2 million and $17.5 million as of December 31, 2021 and 2020, respectively.

We realized net income for the first time for the three months ended June 30, 2020. We were able to achieve net income during the prior

two fiscal years because we were able to develop, market and profitably sell our LogixSmart COVID-19 and other COVID-19 tests, but we

do not have any way to predict how long our market for that test will continue. Potential investors should be aware of the difficulties

normally encountered by a new enterprise, many of which are beyond our control, including substantial risks and expenses in the course

of developing new diagnostic tests, establishing or entering new markets, organizing operations and marketing procedures. The likelihood

of our success must be considered in light of these risks, expenses, complications and delays, and the competitive environment in which

we operate. There is, therefore, nothing at this time upon which to base an assumption that our business plan will continue to prove

successful, and we may not be able to generate significant revenue, raise additional capital or operate profitably. We will continue

to encounter risks and difficulties frequently experienced by early commercial stage companies, including scaling up our infrastructure

and headcount, and may encounter unforeseen expenses, difficulties or delays in connection with our growth. In addition, as a result

of the start-up nature of our business, we can be expected to continue to sustain substantial operating expenses and may not be able

to continue generating sufficient revenues to cover expenditures. Any investment in our company is therefore highly speculative and could

result in the loss of any investment.

Our

near-term success has been dependent on the market for our COVID-19 tests and future success is dependent on continued demand for COVID-19

diagnostics and upon our ability to develop and market other commercially accepted diagnostic tests.

Our

future success will depend, in part, on the continued market for COVID-19 tests, our ability to develop and sell sufficient quantities

of other diagnostics tests, and our ability to successfully receive regulatory approval for and profitably market our “YourTest

PCRTM Device.” Attracting new customers and distribution networks requires substantial time and expense. Any failure to

continue sales of our tests in sufficient quantities to maintain profitability would adversely affect our operating results. Many factors

could affect the market acceptance and commercial success of any of our diagnostic tests and devices, including:

● the breadth of our test menu relative to competitors;

● the extent and success of our marketing and sales efforts; and

General

Risk Factors

The

price of our common stock may fluctuate substantially.

The

market price of our common stock may be subject to wide fluctuation in response to various factors, some of which are beyond our control.

Some factors that may cause the market price of our common stock to fluctuate, in addition to the other risks mentioned in this “Risk

Factors” section and elsewhere in this report, are:

● sales of our common stock by our shareholders, executives, and directors;

● our ability to enter new markets;

● changes in the development status of our diagnostic tests;

● failures to meet external expectations or management guidance;

● changes in industry conditions or perceptions;

● changes in valuations of similar companies or groups of companies;

● departures and additions of key personnel;

● other events or factors, many of which may be out of our control.

In

addition, if the market for stocks in our industry or industries related to our industry, or the stock market in general, experiences

a loss of investor confidence, the trading price of our common stock could decline for reasons unrelated to our business, financial condition

and results of operations. If any of the foregoing occurs, it could cause our stock price to fall and may expose us to lawsuits that,

even if unsuccessful, could be costly to defend and a distraction to management.

Future

sales of our common stock in the public market may cause our stock price to decline and impair our ability to raise future capital through

the sale of our equity securities.

There

are a substantial number of shares of our common stock held by shareholders who owned shares of our capital stock prior to our initial

public offering that may be able to sell in the public market. Sales by such shareholders of a substantial number of shares could significantly

reduce the market price of our common stock.

Shares

issued by us upon exercise of options granted under our equity plan will be eligible for sale in the public market. If any of these holders

cause a large number of securities to be sold in the public market, the sales could reduce the trading price of our common stock. These

sales also could impede our ability to raise capital in the future.

Anti-takeover

provisions in our charter documents and Utah law could discourage delay or prevent a change of control of our Company and may affect

the trading price of our common stock.

We

are a Utah corporation and the anti-takeover provisions of the Utah Control Shares Acquisition Act may discourage, delay or prevent a

change of control by limiting the voting rights of control shares acquired in a control share acquisition. In addition, our Articles

of Incorporation and Bylaws may discourage, delay or prevent a change in our management or control over us that shareholders may consider

favorable. Among other things, our Amended and Restated Articles of Incorporation and Bylaws:

● limit who may call special meetings of shareholders.

These

provisions could have the effect of delaying or preventing a change of control, whether or not it is desired by, or beneficial to, our

shareholders.

NASDAQ

may delist our common stock from its exchange, which could limit investors’ ability to make transactions in our common stock and

subject us to additional trading restrictions.

Should

we fail to satisfy the continued listing requirements of the NASDAQ Capital Market, such as the corporate governance requirements or

the minimum closing bid price requirement, NASDAQ may take steps to delist our common stock. Such a delisting would likely have a negative

effect on the price of our common stock and would impair your ability to sell or purchase our common stock when you wish to do so. In

Source: SEC EDGAR (public domain) · 10-K for the period ended 2021-12-31, filed 2022-03-24 · accession 0001493152-22-007662

Filing HTML rendered to line-structured narrative text by the shipped reducer (datafeeds.edgar_fulltext.visible_text, keep_table_headers=True): scripts and inline-XBRL headers are dropped, and table content is reduced to its short label cells — numeric table data is not rendered and is therefore not counted. The same rendering is used for every year, so a year-over-year comparison is like for like.

The text is our rendering of the filing, not a facsimile: original pagination, typography and tables are not reproduced, and the numbers live in the financial statements (FA).

The outline locates item HEADINGS in this document. Only Items 1A and 7 have certified boundaries elsewhere in the terminal (the redline and the narrative-overlap number); every span here runs from one heading found to the next heading found.

How the outline was chosen. It is the longest chain of item headings that runs forward through both the document and the standard item order: 16 headings are on that chain and 0 further heading-shaped lines are not — the table-of-contents echo of every item, cross-references and exhibit-list mentions. Each entry's length is measured from its heading to the next heading on the chain.