atrc-20201231x10k
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
_________________________________
FORM 10-K
_________________________________
ANNUAL REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2020
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission File Number 000-51470
AtriCure, Inc.
(Exact name of registrant as specified in its charter)
_________________________________
(Address of principal executive offices) (Zip Code)
Registrant’s telephone number including area code: (513) 755-4100
Securities Registered Pursuant to Section 12(b) of the Act:
Title of each class Trading Symbol(s) Name of each exchange on which registered
Common Stock, $.001 par value ATRC NASDAQ
Securities Registered Pursuant to Section 12(g) of the Act:
None
_________________________________
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes No
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes No
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes No
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes No
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act: ̈
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes No
The aggregate market value of the voting Common Stock held by non-affiliates of the registrant, based upon the closing sale price of the Common Stock on June 30, 2020, the last business day of the registrant’s most recently completed second fiscal quarter as reported on the NASDAQ Global Market, was $1,960.6 million.
Class Outstanding February 24, 2021
_________________________________
DOCUMENTS INCORPORATED BY REFERENCE
Items 10, 11, 12, 13 and 14 of Part III of this Form 10-K incorporate information by reference from the registrant’s definitive proxy statement to be filed with the Securities and Exchange Commission within 120 days after the end of the fiscal year covered by this Form 10-K.
Table of Contents
TABLE OF CONTENTS
PART I 2
ITEM 1. BUSINESS 2
ITEM 1A. RISK FACTORS 14
ITEM 1B. UNRESOLVED STAFF COMMENTS 32
ITEM 2. PROPERTIES 32
ITEM 3. LEGAL PROCEEDINGS 32
ITEM 4. MINE SAFETY DISCLOSURES 32
ITEM 6. SELECTED FINANCIAL DATA 34
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK 42
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA 43
ITEM 9A. CONTROLS AND PROCEDURES 74
ITEM 9B. OTHER INFORMATION 76
PART III 77
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE 77
ITEM 11. EXECUTIVE COMPENSATION 78
ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES 78
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES 79
SIGNATURES 82
Table of Contents
This Form 10-K, including the sections titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations”, “Risk Factors” and “Quantitative and Qualitative Disclosures about Market Risk” contains forward-looking statements regarding our future performance. All forward-looking information is inherently uncertain and actual results may differ materially from assumptions, estimates or expectations reflected or contained in the forward-looking statements as a result of various factors, including those set forth under “Risk Factors” and elsewhere in this Form 10-K. Forward-looking statements address our expected future business, financial performance, financial condition and results of operations, and often contain words such as “intends,” “estimates,” “anticipates,” “hopes,” “projects,” “plans,” “expects,” “seek,” “believes,” “see,” “should,” “will,” “would,” “could,” “can,” “may,” “future,” “predicts,” “target,” and similar expressions and the negative versions thereof. Such statements are based only upon current expectations of AtriCure. Any forward-looking statement speaks only as of the date made. Reliance should not be placed on forward-looking statements because they involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements to differ materially from those expressed or implied. Forward-looking statements include statements that address activities, events, circumstances or developments that AtriCure expects, believes or anticipates will or may occur in the future. Forward-looking statements are based on AtriCure’s experience and perception of current conditions, trends, expected future developments and other factors it believes are appropriate under the circumstances and are subject to numerous risks and uncertainties, many of which are beyond AtriCure’s control. With respect to the forward-looking statements, we claim the protection of the safe harbor for forward-looking statements contained in the Private Securities Litigation Reform Act of 1995. These forward-looking statements speak only as of the date of this Form 10-K. We undertake no, and hereby disclaim any and all, obligation to publicly update or revise any forward-looking statements to reflect new information or future events or otherwise unless required by law.
WEBSITE AND SOCIAL MEDIA DISCLOSURE
We use our website (www.atricure.com) and our corporate Facebook, YouTube, LinkedIn, and Twitter accounts as channels of distribution of company information. The information we post through these channels may be deemed material. Accordingly, investors should monitor these channels, in addition to following our press releases, Securities and Exchange Commission, or SEC, filings and public conference calls and webcasts. The contents of our website and social media channels are not, however, a part of this report.
TRADEMARKS
We own or have the rights to use various trademarks referred to in this Annual Report on Form 10-K, including Isolator® clamp, Synergy TM clamp, Epi-Sense® coagulation device, AtriClip® Flex·V®,, and cryoSPHERE® probe, among others, and their respective logos. Solely for convenience, we may refer to trademarks in this Annual Report on Form 10-K without the TM and ®symbols. Such references are not intended to indicate, in any way, that we will not assert, to the fullest extent permitted by law, our rights to our trademarks.
MARKET AND INDUSTRY INFORMATION
Market data used throughout this Annual Report on Form 10-K is based on management’s knowledge of the industry and good faith estimates of management. All of management’s estimates presented herein are based on industry sources, including analyst reports and management’s knowledge. We also relied, to the extent available, upon management’s review of independent industry surveys and publications prepared by a number of sources and other publicly available information. We are responsible for all of the disclosures in this Annual Report on Form 10-K and while we believe that each of the publications, studies and surveys used throughout this Annual Report on Form 10-K are prepared by reputable sources, we have not independently verified market and industry data from third-party sources.
All of the market data used in this Annual Report on Form 10-K involves a number of assumptions and limitations, and you are cautioned not to give undue weight to such estimates. While we believe the estimated market position, market opportunity and market size information included in this Annual Report on Form 10-K is generally reliable, such information, which in part is derived from management’s estimates and beliefs, is inherently uncertain and imprecise and has not been verified by any independent source. Projections, assumptions and estimates of our future performance and the future performance of the industry in which we operate are subject to a high degree of uncertainty and risk due to a variety of factors, including those described in “Item 1A. Risk Factors” of Part I of this Annual Report on Form 10-K and elsewhere in this Annual Report on Form 10-K. These and other factors could cause results to differ materially from those expressed in our estimates and beliefs and in the estimates prepared by independent parties.
1
Table of Contents
PART I
(Dollar and share amounts referenced in this Part I are in thousands.)
ITEM 1. BUSINESS
Overview
We are a leading innovator in treatments for atrial fibrillation (Afib) and left atrial appendage (LAA) management. According to the American Heart Association, Afib affects 1-2% of the population in the United States. It is the most common cardiac arrhythmia, or irregular heartbeat, encountered in clinical practice and results in high utilization of healthcare services by Afib patients. Symptoms of Afib may include heart palpitations, dizziness, fatigue and shortness of breath, and these symptoms may be debilitating and life threatening in some cases. When a patient is in Afib, abnormal electrical impulses cause the atria, or upper chambers of the heart, to fibrillate, or beat rapidly, irregularly, and in an uncoordinated fashion. As a result, blood in the atria may be instasis, increasing the risk that a blood clot will form and cause a stroke or other serious complications. In patients with Afib, a significant percentage of those clots can form inside of the LAA. Patients often progress from being in Afib intermittently (paroxysmal) to being in Afib continuously. The continuous Afib patient population includes persistent Afib, which lasts seven days to one year, and long-standing persistent Afib, which lasts longer than one year. Afiboften occurs in conjunction with other cardiovascular diseases, including hypertension, congestive heart failure, left ventricular dysfunction, coronary artery disease and valvular disease.
Our ablation and left atrial appendage management (LAAM) products are used by physicians during both open-heart and minimally invasive procedures. In open-heart procedures, the physician is performing heart surgery for other conditions and our products are used in conjunction with (“concomitant” to) such a procedure. Minimally invasive procedures are performed on a standalone basis, and often include multi-disciplinary or “hybrid” approaches, combining both surgical procedures using AtriCure ablation and LAAM products and catheter ablation.
We believe that we are currently the market leader in the surgical treatment of Afib. Our Isolator® SynergyTM Ablation Systemis approvedby the United States Food and Drug Administration (FDA) for the treatment of persistent and long-standing persistent Afib concomitant to other open-heart surgical procedures. All of our other ablation devices are cleared for sale in the United States under FDA 510(k) clearances, including our other radio frequency (RF) and cryoablation products, which are indicated for the ablation of cardiac tissue and/or the treatment of cardiac arrhythmias. In addition, certain of our cryoablation probes are cleared for managing pain by temporarily ablating peripheral nerves, or cryo nerve block therapy. In January 2021, we announced 510(k) clearance of additional labeling claims for cryo nerve block therapy to include the treatment of adolescent patients (12-21 years of age). Our AtriClip® LAA Exclusion System products are 510(k)-cleared with an indication for the exclusion of the LAA, performed under direct visualization and in conjunction with other cardiac surgical procedures. Direct visualization, in this context, requires that the surgeon is able to see the heart directly, with or without assistance from a camera, endoscope or other appropriate viewing technologies. The LARIAT® system is cleared for soft tissue ligation. Several of our products are currently being studied to expand labeling claims or to support indications specifically for the treatment of Afib. Our Isolator Synergy clamps, Isolator Synergy pens, Coolrail® linear pen, cryoablation devices, certain products of the AtriClip LAA Exclusion System, COBRA Fusion® Ablation System, the EPi-Sense® Guided Coagulation System with VisiTrax® technology, and LARIAT Suture Delivery Device bear the CE mark and may be commercially distributed throughout the member states of the European Union and other countries that comply with or mirror the Medical Device Directive. Our Isolator Synergy clamps, Isolator Synergy pens, Coolrail linear pen, cryoablation devices, and certain products of the AtriClip LAA Exclusion System are available in select Asia-Pacific countries. We anticipate that substantially all of our revenue for the foreseeable future will relate to products we currently sell or are in the process of developing.
We sell our products to medical centers through our direct sales force in the United States and in certain international markets, such as Germany, France, the United Kingdom and the Benelux region. We also sell our products to distributors who in turn sell our products to medical centers in other international markets. Our business is primarily transacted in U.S. Dollars with the exception of transactions with our European customers, which are transacted primarily in the Euro or the British Pound.
Market Overview
Afib is the most commonly diagnosed sustained cardiac arrhythmia with approximately 1.2 million diagnoses annually in the United States, and affects approximately33 million people worldwide. It is estimated that the incidence of Afib doubles with each decade of an adult’s life. At age 40, remaining lifetime risk for Afib is 26% for men and 23% for women. Afib is an under-diagnosed condition due in large part to the fact that patients with Afib often have mild or no symptoms, and their Afib is often only diagnosed when they seek treatment for an associated condition, such as a structural heart disease or stroke. We believe that increasing awareness of Afib and improved diagnostic screening will result in an increased number of patients diagnosed with Afib over time. Also, since the prevalence of Afib increases with age, there will likely be an increase in the number of diagnosed Afib patients in the United States as the population ages. We believe that the same trends in the United States apply globally.
2
Table of Contents
Afib is a condition that doctors often find difficult to treat and, historically, there has been no widely accepted long-term cure for Afib. This difficulty is exacerbated with more serious forms of Afib, or persistent and long-standing persistent Afib. Over the past two decades, technology advancements have made surgical ablation more effective, repeatable and available to cardiac surgeons and electrophysiologists around the world. Societal guideline changes from the Society of Thoracic Surgeons (STS), Heart Rhythm Society (HRS), and American Association of Thoracic Surgery (AATS) have Class I recommendations for surgical ablation, meaning that it is a “recommended” treatment, no longer just “reasonable”, for patients who have structural heart disease and Afib. In addition, guidelines for the treatment of more serious forms of Afib have also been introduced in the past several years. These societal guidelines are reflective of the scientific evidence suggesting that surgical ablation is safe and effective for patients who have Afib.
Of the patients undergoing open-heart surgery globally on an annual basis, we estimate that over 250,000are potential candidates for surgical ablation using our products. Today, we estimate that approximately 25% to 35% of those candidates are being treated, but we believe many are not treated properly or fully. Of the population diagnosed with Afib, a large percentage of patients are symptomatic and do not respond to pharmacological therapy. Additionally, there is a large population of patients who have no other underlying cardiac disease but who suffer from serious forms of Afib. Many of these patients fail traditional therapies, and thus we believe could benefit from a minimally invasive or hybrid Afib treatment using our products.
In addition, Afib is thought to be responsible for approximately 15% to 20% of the estimated 800,000 strokes that occur annually in the United States. According to the American Heart Association, the risk of stroke is five times higher in people with Afib. Studies have also suggested that 90% of clots that cause strokes in patients who have Afib originate from within the LAA. Afib accounts for billions of dollars in hospitalization-related and office visit costs in the United States each year. Indirect costs, such as the management of Afib-related strokes, are believed to be significant. Because of the risk of stroke and the significant cost burden on the healthcare system, more and more surgeons are routinely addressing the LAA, both in patients who have Afib, but also in those who do not have Afib but may be at increased risk of developing the disease in the future. We believe that our AtriClip system is safer, more effective and easier to use than other products and techniques for excluding the LAA during cardiac surgery. Therefore, we believe that the market for the AtriClip system represents a significant growth opportunity.
Cardiothoracic and thoracic surgery involving an incision through the ribcage, typically referred to as thoracotomy access, can often times result in post-operative pain and longer hospital recovery times as patients refrain from mobilizing their chest near the incision site. Most surgeons will employ a multi-modal pain management protocol that includes global and local pain management techniques, including epidural delivery of medication directly around the spinal cord, intravenous, or oral delivery of opioid and non-opioid pain medications. More focused, local techniques include syringe injections between vertebrates and cryo nerve block, the use of cryo-energy to temporarily ablate peripheral nerves. Cryo nerve block can be delivered using our cryoICE cryoSPHERE® probe, which is specifically designed for cryo nerve block, as well as our cryoICE CRYO2 probe, one of the same probes used to treat cardiac arrhythmias. Depending on the degree of invasiveness, physicians and their nursing staff will take advantage of multiple modes of pain management. It is estimated that each year roughly 140,000 cardiac and thoracic procedures are performed in the United States through thoracotomy access. Hospital recovery times can vary from two to eight days depending on the procedure, operative complications associated with the procedure, pain management protocol, and other factors. In recent years, opioids have come under heavy scrutiny due to their potential for long-term dependency, overdose and possible death. The Center for Disease Control has reported over 49,000 deaths involving opioids in the United States in a single year, and both federal and local governments in the United States have proposed and implemented new regulations to curb the opioid overdose epidemic. It is also estimated that one in seven cardiothoracic surgical patients develops an unhealthy post-procedural addiction to prescription narcotics, making alternative, non-opioid pain management modalities, such as cryo nerve block, increasingly important.
The AtriCure Solution and Products
Our products enable cardiothoracic surgeons to mimic all or portions of thecut and sew Maze procedure with faster, less invasive and less technically challenging approaches.We have completed, and continue to invest in, clinical studies for the use of our ablation and left atrial appendage management products to treat Afib. Leading cardiothoracic surgeons and electrophysiologists, including those who serve or who have served as consultants to us, have published results of pre-clinical and clinical studies utilizing our devices. The results of these studies have assessed efficacy, ease of use and safety endpoints.
3
Table of Contents
Products for cardiac tissue ablation include those that heat tissue using radio frequency (RF) energy to create the tissue effects or those that cool tissue using cryo-thermal heat transfer to create the tissue effects. Our ablation products are part of platforms each consisting of disposable handpieces which connect to compact RF power generation sources or the cryoICE Box generator that we generally place with our direct customers and sell to our distributors.
Products for open and minimally invasive ablation:
Isolator Synergy Clamps.Our Isolator Synergy System historically represented our primary product line and currently generates the majority of our ablation-related revenue. All of our clamps are single-use disposable RF products with jaws that close in a parallel fashion. We sell multiple configurations of our Isolator Synergy clamps with the primary difference being the form of the clamping jaws. The parallel closure compresses tissue and evacuates the blood and fluids from the energy pathway in order to make the ablation more effective. The Isolator Synergy System is currently being evaluated under the DEEP AF IDE pivotal trial and was previously studied under the ABLATE clinical trial supporting a pre-market approval (PMA) in 2011.
Multifunctional Pens and Linear Ablation Devices. These devices are single-use disposable RF products that come in multiple configurations which have different contact lengths. The MAX Pen devices enable surgeons to evaluate cardiac arrhythmias, perform temporary cardiac pacing, sensing and stimulation and ablate cardiac tissue with the same device. Surgeons are able to readily toggle back and forth between these functions. The Coolrail device enables the user to make longer linear lines of ablation. Surgeons generally use one or more of our pen and linear devices in combination with Isolator Synergy clamps.
Products for open ablation:
cryoICE Cryoablation System. The cryoICE cryoablation system is used in open ablation procedures and consists of the cryoICE Box generator along with a single-use disposable probe. The primary differences between these cryoablation probes is the form of the distal end. The cryoICE devices enables the user to make linear ablations of varied lengths. Surgeonsmay utilize the cryoICE devices in combination with Isolator Synergy clamps or independently. The ICE-AFIB clinical trial is studying the safety and efficacy of the cryoICE system for persistent and long-standing persistent Afib treatment during concomitant on-pump cardiac surgery. The cryoSPHERE system and certain cryoICE devices are used to apply cryo-energy to targeted intercostal peripheral nerves in the ribcage in order to provide temporary pain relief. This technique, called cryo nerve block, is applied intra-operatively by cardiothoracic or thoracic surgeons and results in temporary pain relief for up to 90 days after the procedure. Sensation typically returns to the affected region of the chest after this period. Studies, including the FROST trial, are ongoing to characterize the effects of cryo nerve block and further refine the procedure.
Products for minimally invasive ablation:
EPi-Sense Guided Coagulation System with VisiTraxTechnology.The EPi-Sense Guided Coagulation System with VisiTrax technology utilizes monopolar RF energy for the coagulation of tissue. The Epi-Sense device is a single-use disposable which is also capable of intra-operative cardiac signal sensing and recording when connected to an external recording device. The CONVERGE IDE clinical trial evaluated the safety and efficacy of the EPi-Sense Guided Coagulation System with VisiTrax technology to treat symptomatic persistent and long-standing persistent Afib patients who are refractory or intolerant to at least one Class I and/or III anti-arrhythmic drug. The results from the trial have been submitted to the FDA as part of a PMA submission.
Products for appendage management:
AtriClip System. The AtriClip System includes an implantable device (AtriClip) coupled to a single-use disposable applier. The AtriClip is designed to exclude the left atrial appendage by mechanically clamping the appendage from the outside of the heart, eliminating blood flow between the left atrial appendage and the atrium while avoiding contact with circulating blood. We believe that the AtriClip system is potentially safer, more effective and easier to use than other available products and techniques for permanently excluding the left atrial appendage. These benefits compared to other techniques include permanent exclusion and electrical isolation of the appendage. The AtriClip device comes in a variety of lengths allowing the user to select a configuration specific to the patient and in two geometries (a rectangular configuration which encircles the targeted tissue and “V” shape which allows lateral access for improved usability). The appliers come in multiple forms tailored to specific procedural needs and with different deployment mechanisms. The AtriClip System includes various combinations of AtriClips and appliers.
LARIAT System. The LARIAT System is a suture-based solution for soft-tissue closure and is compatible with a wide range of anatomical shapes. The product is currently being studied in the aMAZE IDE clinical trial. The Lariat System includes a suture loop coupled to a single-use disposable applier. The loop is designed to exclude the left atrial appendage by mechanically cinching the appendage from the outside of the heart, eliminating blood flow between the left atrial appendage and the atrium while avoiding contact with circulating blood. The objective of the aMAZE IDE clinical trial is to demonstrate that using the LARIAT System for left atrial appendage exclusion, plus
4
Table of Contents
a pulmonary vein isolation (PVI) catheter ablation, will lead to a reduced incidence of recurrent Afib compared to PVI alone, with a favorable safety profile.
In addition to the above product lines we also sell enabling technologies including our LumitipTM dissectors, COBRA Fusion Surgical Ablation System, the Fusion Magnetic Retriever System and a line of reusable cardiac surgery (valve) instruments. The Lumitip dissector is used by surgeons to separate tissues to provide access to key anatomical structures that are targeted for ablation. Cardiac surgery instruments are used during certain surgical procedures for repair or replacement of heart valves.
Current Afib Treatment Alternatives
Physicians usually begin treating Afib patients with a variety of drugs intended to prevent blood clots, control heart rate or restore the heart to normal sinus rhythm. If a patient’s Afib cannot be adequately controlled with drug therapy, doctors may perform one of several open-heart or minimally-invasive procedures that vary depending on the severity of the Afib symptoms and whether or not the patient suffers from other forms of heart disease. Often, Afib procedures are performed concomitantly with other cardiac treatments.
Alternative treatments to open-heart and minimally invasive procedures include:
Drug Therapy.Pharmaceutical options called anti-arrhythmics are available to treat Afib. Depending on a patient’s severity of the disease and heart condition, physicians typically administer these medications in a hospital setting with continuous monitoring. If the patient goes back into a normal rhythm, the physician will often prescribe a similar anti-arrhythmic drug to try to prevent a recurrence of Afib. The effectiveness of drug therapy varies based on the patient population and the drug being prescribed, among other factors. Often, pharmaceuticals to thin the blood (anti-coagulants) are prescribed due to the increased risk of stroke for patients who also have Afib.
Implantable Devices.Implantable devices, such as defibrillators and pacemakers, can be effective in reducing the symptoms of Afib episodes, but neither device is intended to treat Afib. Patients may continue to experience the adverse effects of Afib as well as some of the symptoms and complications, including dizziness, fatigue, palpitations and stroke because the Afib continues.
Catheter Ablation. Catheter ablation is a procedure that is typically performed by an electrophysiologist. The ablations are made from the inside of the heart using a flexible catheter. The heart is reached via a blood vessel, most commonly through the femoral vein. In proportion to the prevalence of Afib, less than 6% of patients receive catheter-based Afib treatments each year in the United States. The rate of treatment is even lower for long-standing persistent patients in which less than 1% receive catheter-based Afib treatments.
We do not promote our products specifically for Afib treatment in the United States, except for the Isolator Synergy System, which may be promoted according to its FDA-approved indication for patients with persistent and long-standing persistent Afib undergoing certain open concomitant procedures. During elective open-heart surgical procedures, such as bypass or valve surgery, cardiothoracic surgeons use our ablation systems to treat patients with a pre-existing history of Afib. Surgeons use our products to perform cardiac procedures that may vary depending on the length of time a patient has been diagnosed with Afib and whether the patient’s Afib is intermittent (paroxysmal), or continuous (non-paroxysmal), which is typically further classified as persistent or long-standing persistent. Patients who have been diagnosed with Afib for a longer duration and have persistent or long-standing persistent forms of Afib generally receive more extensive ablation procedures than patients who have been diagnosed with Afib for a shorter duration or who have paroxysmal Afib. Additionally, during an open-heart procedure, physicians may use our AtriClip system to exclude the LAA.
For those patients with Afib who do not require a concomitant open-heart surgical procedure, surgeons have used our products for minimally invasive Afib treatment procedures. These procedures have generally been performed through small incisions without the need to place patients on a heart-lung bypass machine. We do not currently have any products with FDA-approved indications for the standalone treatment of Afib, but we have two IDE trials underway at various stages of completion. Additionally, during a minimally invasive surgical procedure, physicians may use our AtriClip system to exclude the LAA.
Certain physicians are combining various minimally invasive stand-alone epicardial ablation procedures (surgical ablation on the outside of the heart) with endocardial ablation and mapping techniques (catheter ablation from the inside of the heart). The combination of procedures are often referred to as “hybrid” or “multi-disciplinary” approaches, in that both surgical ablation and catheter ablations are performed. Sometimes, both procedures are performed on the same day or in the same hospital stay, where other times they are performed weeks or months apart. Patient health condition, physician preference, hospital logistics and procedural room availability influence the decision whether to perform hybrid ablations in a single or a staged setting. Physicians are reporting that they are performing these procedures utilizing certain of our products to primarily treat patients who have non-paroxysmal forms of Afib.
5
Table of Contents
Business Strategy
We are passionately focused on reducing the global Afib epidemic and healing the lives of those affected.Our strategy is to expand the treatment options for patients who suffer from Afibor have a high risk of stroke through the continued development of our technologies and expansion of our product offerings, global commercial expansion and clinical science investments. The key elements of our strategy include:
New Product Innovation. Our product development pipeline includes projects which extend and improve our existing products, as well as researchand development projects for new technologies. We plan to continue to develop new and innovative products, including those that allow us to enter new market opportunities or expand our growth in existing markets.
Invest in Clinical Science. We continue to invest in landmark clinical trials, including the CONVERGE, aMAZE IDE and ICE-AFIB IDE trials, to validate the long-term results of procedures using our products and to support applications to regulatory agencies for expanded indications. We also make clinical research grants to support our product development efforts and expand the body of clinical evidence.
Build Physician and Societal Relationships. We have formed consulting relationships with cardiothoracic surgeons, cardiologists, electrophysiologists and thoracic surgeons who work with us to develop and evaluate our products. Additionally, we have formed advisory boards made up of key opinion leaders in multiple specialties to oversee our training and clinical programs. We are building these relationships to provide insight regarding treatment trends, input on future product direction and education for providers involved in treating the disease.
We are partnering with leading surgical and cardiology societies to increase the awareness of Afib treatment options. In the past three years, both the Society for Thoracic Surgeons and the Heart Rhythm Society have released new guidelines on the surgical treatment of Afib in both open-heart and minimally-invasive settings.
Provide Training and Education. We have recruited and trained sales and physician education professionals to effectively communicate to our customers the unique features and benefits of our technologies as they relate to their indications for use. Our highly trained professionals meet with physicians at institutions around the world to provide education and technical training on the features, benefits and safe-and-effective use of our products. With the approval of our Isolator Synergy System, we instituted a program to train providers on the use of the Isolator Synergy System to treat persistent and long-standing persistent Afib in patients undergoing open-heart surgery. We believe this training and education program has increased awareness about the surgical treatment of Afib during open-heart procedures, and we will continue to make investments to serve our physician customers. As a result of the educational process, we believe that awareness of our technologies is growing and will result in the increased use of our products.
Expand Adoption of Our Minimally Invasive Products. We believe that the catalysts for expanded adoption of our minimally invasive products include completing clinical trials, including the CONVERGE, aMAZE IDE and DEEP AF IDE clinical trials, procedural advancements, such as the hybrid or multi-disciplinary procedure, continued innovation and product development, and the publication of additional scientific evidence supporting the safety and efficacy of hybrid treatments for persistent and long-standing persistent Afib. We believe these efforts will help validate the successful, long-term use of our products for patients with persistent and long-standing persistent Afib. We believe that ongoing research activities, including prospective clinical trials, new procedural techniques and anticipated presentations and publications will create an increased demand for our minimally invasive products.
Evaluate Acquisition Opportunities. We expect to continue to be opportunistic with respect to acquisitions. We evaluate acquisition opportunities on a variety of factors, including investment in clinical science, product innovation and strategic and financial considerations.
Clinical Trials
In the United States, a significant risk device requires the prior submission of an application for an Investigational Device Exemption (IDE) to FDA for approval before initiating a clinical trial. Clinical trials are required to support a pre-market approval (PMA) and are sometimes required for 510(k) clearance. Some trials require a feasibility study followed by a pivotal trial. We are conducting several clinical trials to validate the long-term results of procedures using our products and to support applications to regulatory agencies for expanded indications. In addition, we also conduct various studies to gather clinical data regarding our products. Key trials and studies are:
CONVERGE. We are conducting the CONVERGE IDE clinical trial to evaluate the safety and efficacy of the EPi-Sense Guided Coagulation System with VisiTrax technology to treat symptomatic persistent and long-standing persistent Afib patients who are refractory or intolerant to at least one Class I and/or III anti-arrhythmic drug. The trial provides for enrollment of up to 153 patients at 27 domestic medical centers and three international medical centers. Enrollment began in 2014 and was completed in August 2018. The study protocol requires patient follow-up for twelve months post procedure for the primary effectiveness endpoint assessment and long-term follow-up through five years. The last PMA module was submitted in December 2019. Throughout 2020, we have conducted several meetings with FDA as they review our PMA submission, and we continue to actively work with FDA to
6
Table of Contents
complete the regulatory process. In November 2020, we submitted our responses to FDA, seeking PMA approval of the EPi-Sense system for an indication for treatment of symptomatic, drug-refractory, long-standing persistent atrial fibrillation, when augmented with an endocardial ablation catheter. We are currently waiting for feedback from FDA.
aMAZE. In connection with our acquisition of SentreHEART in August 2019, we are conducting the aMAZE IDE clinical trial. aMAZE is an FDA-approved, prospective, multicenter, randomized controlled trial evaluating the LARIAT system for LAA exclusion adjunctive to PVI catheter ablation for the treatment of persistent and long-standing persistent Afib. The objective of the aMAZE IDE trial is to demonstrate that using the LARIAT system for LAA exclusion, plus a PVI catheter ablation, will lead to a reduced incidence of recurrent Afib compared to PVI alone, with a favorable safety profile. The aMAZE IDE trial provides enrollment of up to 600 patients at 65 sites with one-year follow up. Enrollment was completed in December 2019, and patient follow-up for twelve months post PVI catheter ablation required by the study protocol remains ongoing. At this time, we have not experienced a significant delay in patient follow-up. However, we are unable to predict the occurrence of future delays as a result of the COVID-19 pandemic. In January 2020, we received approval for a CAP for the aMAZE IDE trial. The aMAZE CAP provides for additional patient enrollment of up to 85 patients at existing aMAZE IDE trial sites, with the opportunity to further expand to 250 patients while the pre-market application is under review. Enrollment in the aMAZE CAP is active and remains ongoing.
ICE-AFIB. The ICE-AFIB clinical trial is designed to study the safety and efficacy of the cryoICE® system for persistent and long-standing persistent Afib treatment during concomitant on-pump cardiac surgery. The trial provides for enrollment of up to 150 patients at up to 20 sites in the United States. Enrollment began in January 2019 and remains ongoing.
ATLAS. The ATLAS study is a non-IDE randomized pilot study evaluating outcomes of patients with risk factors for developing postoperative Afib as well as risk of bleeding on oral anticoagulation. There are two types of patients subject to this study: those with a postoperative Afib diagnosis and receiving prophylactic exclusion of the left atrial appendage with the AtriClip device concomitant to cardiac surgery and those with a postoperative Afib diagnosis who are medically managed. Enrollment began in February 2016 and ended in March 2018. Preliminary data was presented at the Heart Rhythm Society meeting in May 2019, and a manuscript will be drafted after event adjudication is complete and data is analyzed.
FROST. We have conducted a cryo nerve block study, which was a non-IDE randomized pilot study evaluating intraoperative intercostal cryoanalgesia. The study involves treatment arm patients who received intercostal cryoanalgesia in conjunction with standard post-operative pain management and control arm patients who receive standard post-operative pain management only. The study provided for enrollment of up to 100 patients at five medical centers. Enrollment began in June 2016 and an interim data analysis was completed when a total of 80 patients were enrolled in 2019. Enrollment was stopped following the interim analysis due to early achievement of statistical significance. Results from the trial were presented at the Society of Thoracic Surgeons podium in January 2020.
DEEP AF Pivotal Study. The DEEP AF IDE pivotal trial evaluates the safety and efficacy of the AtriCure Bipolar System when used in a staged approach where a minimally invasive surgical ablation procedure is first performed. The patient undergoes the endocardial catheter procedure approximately 91-120 days later. The study began in 2014 and was paused during 2016-2017 due to our work to mitigate the risk related to esophageal injury during the procedure. We are committed to patient safety, and we worked collaboratively with FDA and obtained approval to resume enrollment in the trial in 2018 starting with 40 patients. All 40 patients have been enrolled and treated. A report of the safety data has been submitted to FDA, and we are awaiting their response. We plan to seek approval to enroll the full cohort of 220 patients, pending FDA’s review of additional safety data.
CEASE AF. We are also pursuing a non-IDE trial in Europe to compare staged hybrid ablation treatment (minimally invasive surgical ablation procedure is first performed and the patient undergoes the intracardiac catheter procedure approximately 91-180 days later) versus catheter ablation alone. Enrollment began in November 2015 and remains ongoing.
Sales, Marketing and Medical Education
Our global sales and marketing effortsfocus on educating physicians about our unique technologies and their technical benefits. We only promote our products for uses described in their labeling as cleared or approved by the relevant regulatory agencies. We train our sales force on the use of our products to the extent the products are cleared or approved.
Our sales team in the United States has approximately180 employees supporting approximately 54 sales territories. We select our sales personnel based on their expertise, sales experience and reputation in the medical device industry, and their knowledge of cardiac surgeryprocedures and technologies.
We market and sell our products in selected countries outside of the United States through a combination of independent distributors anddirect sales personnel. Our international sales team includes sales representatives focused on our direct markets, such as Germany, France, the United Kingdom and the Benelux region. We also maintain a network of distributors in Asia, South America and Canada, as well as certain countries in Europe, who market and sell our products. We continue to evaluate opportunities for further expansion into markets outside of the United States.
7
Table of Contents
Competition
Our industry is competitive, subject to change and significantly affected by new product introductions and other activities of industry participants. Most of our competitors have greater financial and human resources than we do and have relationships with our target customers, as well as worldwide distribution channels that are more established and developed than ours. Our primary competitor in the cardiac surgery market is Medtronic, plc, who providessimilar products to ours that have been adopted by physicians for the treatment of Afib and related conditions. AtriCure’s Isolator Synergy System is the only medical device that is FDA approved to treat Afib in a surgical setting, and the only medical device approved to treat persistent or long-standing persistent Afib in a concomitant setting. Several other companies offer intracardiac catheter devices that are commonly used by electrophysiologists to treat Afib. These catheter devices are FDA-approved to treat the paroxysmal and persistent forms of Afib, but they are not FDA indicated to treat long-standing persistent Afib. AtriCure is monitoring other companies who are conducting clinical trials that may support FDA approval of their devices to treat persistent and long-standing persistent Afib. We believe that our products compare favorably against competing products during both open-heart and minimally invasive procedures, and that our products improve treatment outcomes for patients with non-paroxysmal forms of Afib when combined with intracardiac catheter devices.
To compete effectively, we strive to demonstrate that our products are an attractive alternative or addition to other treatments by differentiating our products on the basis of safety, efficacy, performance, ease of use, reputation, service and price. In addition, we invest heavily in training and education to ensure that our customers understand available devices, techniques, and approaches for optimal treatment. We have encountered and expect to continue to encounter potential customers who prefer products offered by our competitors.
Third-Party Reimbursement
Payment for patient care in the United States is generally made by third-party payors. These payors include private insurers and government insurance programs, such as Medicare and Medicaid. The Medicare program, the largest single payor in the United States, is a federal health benefit program administered by the Centers for Medicare and Medicaid Services (CMS) and covers certain medical care items and services for eligible beneficiaries, such as individuals over 65 years old, as well as chronically disabled individuals. Because Medicare beneficiaries comprise a large percentage of the populations for which our products are used, and private insurers may follow the coverage and payment policies for Medicare, Medicare’s coding, coverage and payment policies for cardiothoracic surgical procedures are significant to our business.
Medicare’s Part A program pays hospitals for inpatient services, such as cardiothoracic surgery, under the Inpatient Prospective Payment System, which provides a predetermined payment based on the patient’s discharge diagnoses and surgical procedure(s). Discharge diagnoses are grouped into Medicare Severity Diagnosis Related Groupings (MS-DRG). There are several cardiac surgery MS-DRGs associated with the surgical treatment of Afib, with and without a concomitant open-heart procedure. When an ablation device and/or LAA exclusion device (LAAM)is used during a concomitant open-heart procedure, Medicare’s hospital reimbursement is based upon the patient’s primary structural heart surgical procedure. Therefore, any additional procedure concomitant to the primary procedure would not receive incremental hospital payment. In contrast, sole therapy minimally invasive ablation or surgical LAAM procedures typically are reimbursed under a general cardiac surgery MS-DRG. We believe hospital reimbursement rates for sole therapy and concomitant therapy cardiac surgical ablation or LAAM are adequate to cover the cost of our products even when multiple procedures are performed.
Physicians are reimbursed for their services separately under the Medicare Part B physician fee schedule. When performing a surgical cardiac ablation with and without a concomitant open-heart procedure, surgeons report Current Procedural Terminology (CPT) codes to receive a professional fee payment. Multiple CPT codes may be reported by a physician during a procedure if multiple procedures are performed. There are category one CPT codes for both concomitant and standalone surgical Afib treatment. At this time, there are no category one CPT codes for the physician to report surgical LAAM. However, some providers utilize unlisted CPT codes to obtain reimbursement in these situations.
In addition to the Medicare program, many private payors look to CMS policies as a guideline in setting their coverage policies and payment amounts. The current coverage policies of these private payors may differ from the Medicare program, and payment rates may be higher, lower, or the same as the Medicare program. In some cases, certain private payors adopt negative coverage policies with respect to therapies involving our products. We engage third-party reimbursement consultants that provide support to our customers in the event of a coverage denial.
Outside of the United States, third-party reimbursement varies widely by geography and by the type of therapy in which our devices are used. For example, even though a new medical device may have been approved for commercial distribution, we may find limited demand for the device until coverage and sufficient reimbursement levels have been obtained from governmental and private third-party payors. In addition, some private third-party payors require that certain procedures or the use of certain products be authorized in advance as a condition of reimbursement. In some countries, cost containment initiatives and health care reforms include initiatives like governmental reviews of reimbursement rate benchmarks, which may significantly reduce reimbursement for procedures using our medical devices or deny coverage for those procedures altogether. We are actively working to pursue market
8
Table of Contents
access in certain geographies, which includes applying for new reimbursement for therapies in which our devices are being used or pursuing specific reimbursement for utilization of our devices.
Government Regulation
Our products are medical devices and are subject to regulation in the United States by FDA and other federal agencies, and by comparable authorities in the European Union (EU) and other countries worldwide.
USRegulation:
FDA regulations govern nearly all of the activities that we perform, or that are performed on our behalf, to ensure that medical products distributed domestically or exported internationally are safe and effective for their intended uses. FDA regulates the total product lifecycle from early design, development and testing, to manufacturing and commercialization activities, as well as post-market surveillance and reporting, including corrective actions, removals and recalls. Unless an exemption applies, most medical devices distributed in the United States require either 510(k) clearance or PMA from FDA.
510(k) Clearance Pathway.To obtain 510(k) clearance, we must submit a notification to FDA demonstrating that our proposed device is substantially equivalent to a predicate device, i.e., a previously cleared and legally marketed 510(k) device or a device that was in commercial distribution before May 28, 1976, for which FDA has not yet called for the submission of a PMA. Any modification to a 510(k)-cleared device that would constitute a major change in its intended use, or a change in its design or manufacture that could significantly affect the safety or effectiveness of the device, requires a new 510(k) clearance.
Premarket Approval Pathway. A PMA must be submitted to FDA if the device cannot be cleared through the 510(k) process and is not otherwise exempt. A PMA must be supported by extensive data, including but not limited to technical, preclinical, clinical, manufacturing and labeling, to demonstrate the safety and effectiveness of the device for its intended use. A PMA supplement is required for changes affecting the safety or effectiveness of a PMA-approved device, including but not limited to new indications for use, a different manufacturing facility, or changes in the manufacturing process, labeling, or design specifications or components of the device.
Clinical Trials. Clinical trials are required to support a PMA and are sometimes required for 510(k) clearance. Clinical trials are subject to extensive recordkeeping and reporting requirements. Our clinical trials must be conducted under the oversight of an Institutional Review Board (IRB) for the relevant clinical trial sites and must comply with FDA regulations, including, but not limited to, those relating to current good clinical practices. We are also required to obtain the written informed consent of patients in form and substance that complies with both FDA requirements and other human subject protection regulations established by FDA. We must conduct our clinical studies in compliance with state and federal privacy laws, including the Health Insurance Portability and Accountability Act (HIPAA).
Educational Grants. FDA regulates the promotion of medical devices by manufacturers and prohibits the promotion of uses that are not on the approved or cleared labeling of the device. FDA does not regulate the practice of medicine or the conduct or content of medical education conducted by third parties, which may include uses that are not on approved or cleared device labeling, referred to as “off-label” uses. Manufacturers may provide unrestricted financial support for independent third-party medical education programs in the form of educational grants intended to offset the cost of such programs. If the manufacturer controls or unduly influences the content of such programs, FDA considers those programs to be promotional activities by the manufacturer and thus subject to FDA regulation including promotional restrictions. We seek to ensure that our educational grants program is conducted in accordance with FDA criteria for independent educational activities. However, we cannot provide an assurance that FDA or other government authorities would view the third-party programs we have supported as being independent.
Pervasive and Continuing Regulation. There are numerous regulatory requirements that apply after a product is cleared or approved by FDA, including, but not limited to: annual establishment registration and product listing; current good manufacturing practice for devices, referred to as the Quality System Regulation (QSR); labeling requirements, and advertising and promotion guidelines, assessing the significance of any changes to a device, monitoring and reporting serious and adverse events and certain device malfunctions, and reporting certain device corrections and removals. Our manufacturing facilities and processes are also subject to FDA inspections to ensure compliance with QSR.
In addition to FDA regulation, the advertising and promotion of certain medical devices are also regulated by the Federal Trade Commission and by state regulatory and enforcement authorities. On occasion, promotional activities for FDA-regulated products can be the subject of enforcement action brought under healthcare reimbursement laws and consumer protection statutes. In addition, under the Federal Lanham Act and similar state laws, competitors and others can initiate litigation relating to advertising claims.
Fraud, Abuse and False Claims. We are directly and indirectly subject to various federal and state laws governing our relationship with healthcare providers. In particular, the Anti-Kickback Statute is a federal criminal law that applies broadly and prohibits the knowing and willful offer or payment of remuneration to induce or reward patient referrals or the generation of business
9
Table of Contents
involving any item or service payable by a federal health care program. The federal False Claims Act (FCA) imposes civil liability on any person or entity that submits, or causes the submission of, a false or fraudulent claim to the United States government. Damages under the FCA consist of the imposition of fines and penalties and can be significant. The FCA also allows a private individual or entity with knowledge of past or present fraud against the federal government to sue on behalf of the government to recover the civil penalties and treble damages.
AtriCure is a member of the Advanced Medical Technology Association (AdvaMed), a voluntary United States trade association for medical device manufacturers. This association has established guidelines and protocols for medical device manufacturers in their relationships with healthcare professionals on matters including research and development, product training and education, grants and charitable contributions, support of third-party educational conferences and consulting arrangements. Adoption of the AdvaMed Code of Ethics for Interactions with Healthcare Professionals (the “AdvaMed Code”) by a medical device manufacturer is voluntary, and while the Office of the Inspector General and other federal and state healthcare regulatory agencies encourage its adoption and may look to the AdvaMed Code, they do not view adoption of the AdvaMed Code as proof of compliance with applicable laws. We have adopted the AdvaMed Code and incorporated its principles in our standard operating procedures, employee training programs, and relationships with medical professionals.
Regulation Outside of the United States:
Sales of medical devices outside of the United States are subject to foreign governmental regulations which vary substantially from country to country. The time required to obtain certification or approval by a foreign country may be longer or shorter than that required for FDA clearance or approval and the requirements may be different, but the general trend is toward increasing regulation and greater requirements for the manufacturer to provide more bench testing and clinical evidence.
While some harmonization of global regulations has occurred, requirements continue to differ significantly. In China, for example, the product must first have approval in the country of origin. In China, successful results from local product safety testing precedes submission of documentation to obtain approval. In addition, regulatory agencies and authorities can halt distribution within the country or otherwise take action in accordance with local laws.
Conformity Assessment Pathway. In the European Union, various directives regulate the design, manufacture and labeling of medical devices, and more stringent conformity assessment requirements have been put in place with the 2017 Medical Device Regulation, effective May 26, 2021. The method for assessing conformity varies depending on the type and class of the product, but typically involves a combination of quality system assessment and product conformity assessment by a third-party notified body, an independent and neutral institution appointed by a country to conduct the conformity assessment. This third-party assessment includes a review of documentation related to the device that may be as extensive as the documentation requirements that the United States FDA requires for higher risk products. The notified body also audits the manufacturer’s quality system and performs a detailed review of the testing of the manufacturer’s device. Successful completion of a conformity assessment procedure allows a manufacturer to issue a declaration of conformity with the requirements of the relevant directive and affix the CE mark to the device. Devices that bear the CE mark may be commercially distributed throughout the member states of the European Union and other countries that comply with or mirror the medical device directives or medical device regulations.
Pervasive and Continuing Regulation. There are numerous regulatory requirements that apply after a product has been approved by the notified body for CE marking, including, but not limited to: labeling, advertising and promotion, reporting of device modifications, monitoring the safety of the product and performing corrections and removals when necessary, maintaining “state of the art” requirements for the devices through compliance with standards, and obtaining recertification of the quality system and individual device certificates on a periodic basis.
Intellectual Property
Protection of our intellectual property is a priority for our business, and we rely on a combination of patent, copyright, trademark and trade secret laws to protect our interests. Our ability to protect and use our intellectual property rights in the continued development and commercialization of our technologies and products, operate without infringing the proprietary rights of others, and prevent others from infringing our proprietary rights is important to our continued success. We will be able to protect our products and technologies from unauthorized use by third parties only to the extent that they are covered by valid and enforceable patents, trademarks or copyrights, or are effectively maintained as trade secrets, know-how or other proprietary information.
We hold numerous issued United States and international patents. We also have multiple pending United States and international patent applications. We seek patent protection relating to technologies and products we develop in both the United States and in selected foreign countries. While we own much of our intellectual property, including patents, patent applications, trademarks, trade secrets, know-how and proprietary information, we also license patents and related technology of importance to the commercialization of our products. To continue developing and commercializing our current and future products, we may license intellectual property from commercial or academic entities to obtain the rights to technology that is required for our research, development and commercialization activities.
10
Table of Contents
All of our employees and technical consultants are required to execute confidentiality agreements in connection with their employment and consulting relationships with us. We also generally require them to agree to disclose and assign to us all inventions conceived in connection with their relationship with us. We devote significant resources to obtaining patents and other intellectual property and protecting our other proprietary information. If valid and enforceable, these patents may give us a means of blocking competitors from using infringing technology to compete directly with our products. We also have proprietary information that may not be patentable. With respect to proprietary information that is not patentable, we have chosen to rely on trade secret protection and confidentiality agreements to protect our interests.
Manufacturing
We assemble, inspect, test and package the majority of our products at our facilities in Ohio and California, and our products are sterilized by third parties. Purchased components are generally sourced from a single supplier, but alternatives to these suppliers are available in the event this would be needed.
To minimize supply chain risks, we maintain inventory levels of components and raw materials specific to the respective part or device. We assess tooling and equipment on an ongoing basis. Order quantities and lead times for components purchased from outside suppliers are based on our forecasts derived from historical demand and anticipated future demand. Lead times may vary significantly depending on the size of the order, time required to fabricate and test the components, specific supplier requirements and current market demand for the components and subassemblies. To date, we have not experienced significant delays in obtaining any of our components.
We regularly audit our suppliers for compliance with our quality system requirements, the QSR and/or applicable ISO standards. We are an FDA-registered medical device manufacturer and certified to ISO 13485:2016. In addition, we have successfully participated in the Medical Device Single Audit Program (MDSAP) and have been certified accordingly. The MDSAP program is recognized in Australia, Brazil, Canada, Europe, Japan and the United States.
We are subject to numerous federal, state and local laws relating to such matters as laboratory practices, the experimental use of animals, the use and disposal of hazardous or potentially hazardous substances, safe working conditions, manufacturing practices, environmental protection and fire hazard control.
Consulting Relationships
We have developed consulting relationships with scientists and physicians throughout the world to support our research and development, clinical and training and educationprograms. We work closely with these thought leaders to understand unmet needs and emerging applications for the treatment of Afib.
Our physician consulting agreements are intended to satisfy the requirements of the personal services “Safe Harbor” regulation as well as the AdvaMed Code and the MedTech Europe Code of Ethical Business Practice. As such, they provide for payment of a fair market value fee only for legitimate services rendered to us. We do not expect or require the consultant to utilize or promote our products, and consultants are required to disclose their relationship with us as appropriate, such as when publishing an article in which one of our products is discussed. Amounts paid to physicians in the United States are disclosed by us in annual reports submitted to CMS under the federal “Open Payments” law. Amounts paid to physicians in certain other countries are also disclosed by us in reports submitted to various governmental agencies in those countries, in accordance with the laws of the jurisdictions where those physicians reside or practice, or where the payments are made.
Human Capital Management
Successful execution of our strategy is dependent on attracting, developing and retaining key employees and members of our management team. The skills, experience, and industry knowledge of our employees significantly benefit our operations and performance. We continuously evaluate, modify, and enhance our internal processes to increase employee engagement, productivity, and efficiency.
We had approximately 750 employees as of January 31, 2021. None of the employees were represented by a labor union or covered by a collective bargaining agreement. We have never experienced any employment-related work stoppages and consider our employee relations to be in good standing. At AtriCure, the employee experience is crucial to the ongoing success of the company. We work to provide a culture that augments the intrinsic rewards of our mission – one where employees feel valued and supported every day. We strive to communicate with transparency, engage at every level, and share in personal milestones. Our culture provides opportunities for employees to feel a part of a community through paid leave for volunteering and individual recognition with “Heart of AtriCure” awards. Our employees have voted us as a Top Workplace five times, and our culture is regularly cited in our internal engagement surveys as a leading positive attribute of the company. Our culture is a central asset to our company.
11
Table of Contents
Employee Compensation and Benefits
Competitive compensation and benefits are an integral part of attracting world-class talent to our organization. We are committed to regularly analyzing and evaluating the effectiveness of our compensation and benefit programs and benchmarking our programs against the market and our industry peers. Annual pay increases and incentive compensation are based on performance, which is communicated to employees and documented through our annual talent review and management process, as well as upon internal transfer and/or promotion.
All U.S.-based employees are eligible for medical, dental, and vision insurance, paid leave for both vacation and illness, a 401(k) plan that includes a discretionary company matching contribution, a stock purchase plan enabling employees to purchase AtriCure stock at a reduced price, life and AD&D insurance, and short- and long-term disability coverage. We also offer a variety of ancillary benefits as enhancements, such as critical illness and accident coverage, telemedicine, adoption assistance, paid time off to volunteer, tuition reimbursement, and a wellness program. International benefits are aligned with local market offerings.
Diversity, Equity, and Inclusion
We have an ongoing commitment to advancing Diversity, Equity, and Inclusion (DE&I) throughout our workplace and the communities in which we operate. By honoring the dignity of each person, we foster a culture of inclusion where everyone is welcome. We do this by embracing diverse voices and experiences, supporting programs and resources that build an authentic and respectful workplace, and providing fair and equitable opportunities for each person to contribute meaningfully in both their work and their personal lives. We believe that everyone should feel confident in bringing their authentic selves to work and contribute to our mission.
We believe our workforce needs to be diverse, and leverage the skills and perspectives of a variety of backgrounds and experiences. To attract a global workforce, we strive to embed a culture where employees can bring their whole selves to work. In addition to established and ongoing workplace harassment training, we recently have expanded our DE&I training company-wide, as well as into new hire orientation, established DE&I committees with employee volunteers, and expanded recruitment outreach to include more organizations, societies, and sources that serve minority communities. In 2020, we provided a paid half-day holiday to all U.S. employees on election day, to offer ample opportunity for voting, and for 2021, we added Martin Luther King Jr. Day as a designated AtriCure U.S. holiday. We have also recently hired a Diversity, Equity, and Inclusion leader to further advance our commitment and programs.
Training and Development
Employee training and development is a priority at AtriCure. We strive to create an environment where employees can realize their potential. We provide a range of training courses and online resources, as well as developmental coaching and mentoring. We have a regular monthly schedule of opportunities that allows employees to access both instructor-led classrooms and self-directed web-based courses. We are committed to identifying and developing the talents of our next-generation leaders. On an annual basis, we conduct a 9-Box Leadership Review, a process in which our Executive Leadership Team and Vice Presidents are closely involved. In that process, we review existing leaders and prospective leaders throughout the organization and determine next best steps for their future development. Developmental plans for employees can range from leadership support to technical skill-building.
We also work to ensure all employees have access to training that is consistent with the competencies that are measured as part of performance management: Delivering Results with Accountability, Initiative and Involvement, Teamwork and Support, and for those who manage people, Develop and Maintain High Performance Teams and Communication.
Safety for All Employees
We are committed to maintaining a safe workplace and promoting the well-being of all of our employees. We have implemented multiple safety programs and regularly perform safety hazard evaluations within our facilities. Programs include our Emergency Site Action Plan for emergencies such as fire response, severe weather threats and shelter in place incidents, as well as our Certified First Responders safety program that include Red Cross training of employees in CPR, AED Usage and First Aid practices. We recognize that the use of tobacco is linked to many adverse health effects, including those that impact the heart, and we offer our employees tobacco cessation programs. Effective January 1, 2021, our Ohio office locations are entirely tobacco- and nicotine-free, and to the extent permitted in the states of our other offices, those locations are also entirely tobacco- and nicotine-free.
Throughout the COVID-19 pandemic, our employees have been our first and foremost focus. We have implemented a number of measures to provide a safe work environment for our employees. Most of our office-based employees began working remotely in March 2020, while field-based sales and clinical employees continue to support cases, utilizing technology to engage with customers in virtual settings when physical access is prohibited. We have modified our manufacturing operations in order to adhere to social distancing requirements dictated by local law and have taken measures to help ensure safety, including requiring temperature checks for employees entering our facilities, wearing face coverings, and other best practices surrounding hygiene to mitigate the spread of viruses by our employees. We have not implemented any temporary or permanent reductions in headcount or to non-executive employee compensation. AtriCure has provided regular, mandatory training for all employees on COVID-19 protocols that are consistent with Center for Disease Control recommendations and state and country-specific guidelines. Such protocols and guidance is continually updated and made available to employees. We have also established decision-making protocols for contact tracing, return to work, and sanitization.
12
Table of Contents
Available Information
Our principal executive offices are located at 7555 Innovation Way, Mason, Ohio and our telephone number is 513-755-4100. We are subject to the reporting requirements under the Securities Exchange Act of 1934. Consequently, we are required to file reports and information with the Securities and Exchange Commission (SEC) including reports on the following forms: Form 10-K, Form 10-Q, Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934. These reports and other information concerning us may be accessed through the SEC’s website at http://www.sec.gov. You may also find, freeofcharge, on our website at http://www.atricure.com, electronic copies of our Form 10-Ks, Form 10-Qs, Form 8-Ks, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934. Such filings are placed on our website as soon as reasonably practicable after they are filed or furnished, as the case may be, with the SEC. Our charters for our Audit, Compensation, Nominating and Corporate Governance, Strategy and Compliance, Quality and Risk Committees and our Code of Conduct are available on our website. In the event that we grant a waiver under our Code of Conduct to any of our officers or directors or make any material amendments to the Code of Conduct, we will publish it on our website within four business days. Information on our website is not deemed to be a part of this Form 10-K.
13
Table of Contents
ITEM 1A. RISK FACTORS
The following discussion of risk factors contains forward-looking statements. These risk factors may be important to understanding other statements in this report. The following information should be carefully considered in addition to the other information set forth in this report, including the Management’s Discussion and Analysis of Financial Conditions and Results of Operations section and consolidated financial statements and accompanying notes. If any of the risks or uncertainties described below actually occur or continue to occur, our business, financial condition, results of operations and stock price could be materially and adversely affected. The risks below are not the only risks we face and additional risks not currently known to us or that we presently deem immaterial may emerge or become material at any time and may negatively impact our business, reputation, financial condition, results of operations or stock price. The order in which these factors appear should not be construed to indicate their relative importance or priority.
Risk Factors Summary
The following is a summary of the principal risks that could adversely affect our business, operations, financial results and stock price.
COVID-19 Pandemic Risks
COVID-19 pandemic may continue to affect the demand for our products, adversely impact our clinical trials and limit our ability to execute our business strategy.
Commercial Execution and Product Performance Risks
Failure to achieve widespread market acceptance domestically may harm operating results.
Competition from existing and new products and procedures may decrease our market share.
Clinical data may be negative, or our trials may not satisfy requirements of regulatory authorities, slowing rate of adoption for our products by the medical community.
We may not achieve Pre-Market Approval for the EPi-Sense device.
We may be unable to promptly train sufficient numbers of physicians in the use of our products, resulting in slower market acceptance.
Reliance on independent distributors to sell our products in some international markets could adversely impact our sales.
Industry Condition Risks
Rising healthcare costs may result in efforts by government and private payors to contain or reduce healthcare spending, including for procedures that utilize our products.
Adverse changes in payors’ policies toward coverage and reimbursement for surgical procedures would harm our ability to promote and sell our products.
International sales may decrease if coverage and adequate levels of reimbursement from governmental and third-party payors outside of the United States are not obtained and maintained.
Operational Risks
Unfavorable publicity relating to our business and industry could negatively impact our operations.
Reliance upon single and limited source third-party suppliers and logistics providers could harm our business if such third parties cannot provide materials or products or perform services for us in a timely manner.
Our manufacturing operations are highly centralized and any disruption at our manufacturing facility could harm our business.
Our business could be negatively impacted if we fail to successfully integrate acquisitions.
If we fail to properly manage our anticipated growth, our business could suffer.
If we cannot retain our skilled employees or recruit additional qualified personnel, our business may suffer.
Disruptions of critical information systems or material breaches in the security of our systems could harm our business, customer relations and financial condition.
Our insurance may not cover our indemnification obligations and other liabilities associated with our operations.
Legal & Compliance Risks
We could face substantial penalties if we are unable to fully comply with federal, state and foreign regulations.
We may be subject to fines, injunctions and penalties if we fail to comply with extensive FDA regulations.
Unless and until we obtain additional FDA approval for our products, we will not be able to promote most of them to treat Afib or prevent stroke.
14
Table of Contents
We may be subject to fines, injunctions and penalties if we are found to be promoting our products for unapproved or off-label uses.
Modifications to our products may require new approvals by the FDA; failure to obtain such approvals could result in a recall of the modified products and limitation on future sales until approved.
If we or our third-party vendors fail to comply with extensive FDA regulations relating to the manufacturing of our products we may be subject to fines, injunctions and penalties.
Any adverse finding, allegation, or exercise of enforcement or regulatory discretion against us as a result of the current investigation by the United States Department of Justice could negatively affect our business.
The use of products we sell may result in injuries or other adverse events that lead to product liability claims.
Our ability to compete in the marketplace could be affected if our intellectual property rights fail to provide meaningful commercial protection for our products.
Litigation and administrative proceedings over patent and other intellectual property rights are common in our industry, and any litigation or claim against us may cause us to incur substantial costs.
We are subject to various regulatory and other risks related to selling our products internationally which could harm our revenue.
Any allegation or determination of wrongdoing under the Foreign Corrupt Practices Act or other anti-corruption laws could have a material adverse effect on our business.
Compliance with new European Union medical device regulation may limit our ability to sell our product in European markets.
The United Kingdom’s withdrawal from the European Union may have a negative impact on global economic conditions and our international sales.
Financial Risks
Our quarterly financial results are likely to fluctuate significantly.
We have a history of net losses, and we may never become profitable.
Our income tax expense could increase and adversely impact cash flows if our federal tax net operating loss and general business credit carryforwards expire or are limited.
Fluctuations in our effective income tax rate could adversely affect our operations, earnings, and earnings per share.
Regulatory questions of our intercompany transfer pricing policies or changes in transfer pricing laws could increase our effective tax rate.
Our goodwill or other intangibles assets may become impaired which could adversely affect our financial performance.
We may take inventory-related charges as a result of inaccurate forecasting or estimates of product life cycles which would negatively affect our gross margins and results of operations.
We are subject to credit risk from our accounts receivable related to our sales.
We may be unable to comply with the covenants of our Loan Agreement.
Common Stock Risks
We may fail to achieve our publicly announced guidance about our business which could cause a decline in our stock price.
Securities analysts may discontinue coverage for our common stock or issue negative reports which could have a negative impact on the market price of our common stock.
Our common stock may experience extreme fluctuations in the price and trading volume causing our stockholders to lose some or all of their investment.
The sale of material amounts of common stock could encourage short sales by third parties and depress the price of our common stock causing our stockholders to lose part or all of their investment.
Our stock ownership will be diluted if we are required to issue additional shares of our common stock to the former stockholders of SentreHEART as certain milestones in the merger agreement are met.
Stockholder ownership of our common stock may be diluted if we sell common stock in a capital raising transaction or issue shares in a future acquisition.
Anti-takeover provisions in our amended and restated certificate of incorporation and amended and restated bylaws and under Delaware law could inhibit a change in control or a change in management that stockholders consider favorable.
Our stockholders must rely on stock appreciation for any return on investment as we do not expect to pay dividends in the foreseeable future.
15
Table of Contents
COVID-19 Pandemic Risks
The outbreak of coronavirus (COVID-19) is materially and adversely affecting demand for our products and with prolonged delays, could continue to affect the demand for our products and impact our clinical trials, causing disruption to our business and negatively impacting our results of operations and financial condition.
We are subject to risks related to public health crises such as the global pandemic associated with COVID-19. On January 30, 2020, the World Health Organization declared that the recent coronavirus COVID-19 outbreak was a global health emergency, and on March 11, 2020, declared it to be a pandemic.The COVID-19 outbreak has negatively impacted and is expected to continue to negatively impact our operations and revenues and overall financial condition by significantly decreasing the number of procedures performed with our products. The number of procedures performed has significantly decreased as health care organizations globally have deferred non-emergent procedures to preserve resources and prioritized the treatment of patients with COVID-19 and protect patients from potential exposure to COVID-19. For example, in the United States, governmental authorities have recommended, and in certain cases required, that elective, specialty and other procedures and appointments, be suspended or canceled to avoid non-essential patient exposure to medical environments and potential infection with COVID-19 and to focus limited resources and personnel on the treatment of COVID-19. These measures and challenges will likely continue for the duration of the pandemic, which is uncertain, and will significantly reduce our revenue while the pandemic continues.
Numerous state and local jurisdictions have imposed, and others in the future may impose, “shelter-in-place” orders, quarantines, executive orders and similar government orders and restrictions for their residents to control the spread of COVID-19. Such orders or restrictions have resulted in slowdowns and delays, travel restrictions and cancellation of events, among other effects. Other disruptions or potential disruptions include restrictions on our personnel and partners to travel and access customers for training and case support; delays in approvals by regulatory bodies; delays in product development efforts; and additional government requirements or other incremental mitigation efforts that may further impact our or our suppliers’ capacity to manufacture, sell and support the use of our products.
We may experience diversion of healthcare resources away from the conduct of clinical trials, including the diversion of hospitals serving as our clinical trial sites. Key clinical trial activities, such as clinical trial site monitoring, subject visits and study procedures, may be interrupted due to limitations imposed or recommended by federal or state governments, trial sites, employers or others. We may also encounter interruption or delays in the operations of FDA or other regulatory authorities, which may impact review and approval timelines.
In addition, the COVID-19 pandemic may impact the trading price of shares of our common stock and could impact our ability to raise additional capital on a timely basis or at all.
The COVID-19 pandemic continues to rapidly evolve. The extent to which COVID-19 may impact our business, including our nonclinical activities, clinical trials and financial condition, will depend on future developments, which are highly uncertain, such as the geographic spread of the disease, the duration of the pandemic, travel restrictions, business closures or business disruptions and the effectiveness of actions taken to contain and treat the disease. To the extent the COVID-19 pandemic adversely affects our business and financial results, it may also have the effect of heightening many of the other risks set forth in this “Risk Factors” section.
Commercial Execution and Product Performance Risks
If our products do not achieve widespread market acceptance in the United States, our operating results will be harmed, and we may not achieve or sustain profitability.
Our success depends in large part on the medical community’s acceptance of our products in the United States, which is the largest revenue market in the world for medical devices. Our ablation and our LAA management product sales in the United States generate the majority of our revenue. We expect that sales of these products will continue to account for a majority of our revenue for the foreseeable future and that our future revenue will depend on the increasing acceptance by the medical community of our products as standard of care for treating Afib and managing the LAA. The U.S. medical community’s acceptance of our products will depend upon our ability to demonstrate the safety and efficacy, advantages, long-term clinical performance and cost-effectiveness of our products. In addition, acceptance of products for the treatment of Afib is dependent upon, among other factors, the level of awareness and education of the medical community about the surgical treatment of Afib and the existence, effectiveness and safety of our products. Market acceptance and adoption of our products for the treatment of Afib also depends on the level of health insurer (including Medicare) reimbursement to physicians and hospitals for procedures using our products. Negative publicity resulting from incidents involving our products, or similar products could have a significant adverse effect on the overall acceptance of our products. If we encounter difficulties growing the market for our products in the U.S., we may not be able to increase our revenue enough to achieve or sustain profitability, and our business and operating results will be seriously harmed.
16
Table of Contents
Competition from existing and new products and procedures may decrease our market share and may cause our revenue to decline, and could adversely affect our operating results.
The medical device industry, including the market for the treatment of Afib, is highly competitive, is subject to rapid technological change and can be significantly affected by new product introductions and promotional activities. There is no assurance that our products will compete effectively against drugs, catheter-based ablation, implantable devices, other surgical ablation devices, or other products or techniques to occlude the left atrial appendage. Our products may become obsolete prior to the end of their anticipated useful lives, or we may introduce new products or next-generation products prior to the end of the useful life of our current products, either of which may require us to dispose of existing inventory and related capital equipment and/or write off their value or accelerate their depreciation. In addition, other products may be sold at lower prices. Due to the size of the Afib and LAA management markets, we anticipate that new or existing competitors may develop competing products, procedures and/or clinical solutions. There are few barriers to prevent new entrants or existing competitors from developing products to compete directly with ours. Companies also compete with us to attract qualified scientific and technical personnel as well as funding. Most of our competitors and potential competitors have greater financial, manufacturing, marketing and research and development capabilities than we have, and may obtain FDA approval or clearance for their products before we do. The introduction of new products, procedures or clinical solutions, or our competitors obtaining FDA approvals or clearances, may result in price reductions, reduced margins, loss of market share, or may render our products obsolete, which could adversely affect our revenue and future profitability.
Any clinical data that is generated regarding our products may not be positive, and our current and planned clinical trials may not satisfy the requirements of the FDA or other regulatory authorities.
Our clinical trials are expensive to conduct, typically taking many years to complete, and have uncertain outcomes. Delays in patient enrollment or failure of patients to consent or continue to participate in a clinical trial may cause an increase in costs and delays in the approval and attempted commercialization of our products or result in the failure of the clinical trial. Conducting successful clinical studies may require the enrollment of large numbers of clinical sites and patients, and suitable patients may be difficult to identify and recruit. Patient enrollment in clinical trials and completion of patient participation and follow-up depends on many factors, including the size of the patient population; the nature of the trial protocol; the attractiveness of, or the discomforts and risks associated with, the treatments received by enrolled subjects; the availability of appropriate clinical trial investigators, support staff, and proximity of patients to clinical sites; and the ability to comply with the eligibility and exclusion criteria for participation in the clinical trial and patient compliance.
Our products will be measured on their efficacy which is dependent on the number of patients that experience Afib or stroke following treatment with our products and the number of patients that have serious complications resulting from ablations or LAA exclusion using our products. We cannot provide any assurance that the data collected during our clinical trials will be compelling to the medical community because it may not be scientifically meaningful, may identify unexpected safety concerns, and may not demonstrate that procedures utilizing our products are an attractive option when compared against data from alternative procedures and products. Negative data would affect the use of our products and harm our business and prospects.
Conversely, positive results from clinical trial experience should not be relied upon as evidence that any of our clinical trials will succeed or that they will satisfy regulatory requirements for product approval. There can be no assurance that the results of studies conducted by collaborators or other third parties will be viewed favorably or are indicative of our own future study results. We may be required to demonstrate with substantial evidence through well-controlled clinical trials that our product candidates are either (i) safe and effective for use in a diverse population for their intended uses or (ii) are substantially equivalent to predicate devices under section 510(k) of the Food, Drug and Cosmetic Act. Success in early clinical trials does not mean that future clinical trials will be successful because product candidates in later-stage clinical trials may fail to demonstrate sufficient safety and efficacy to the satisfaction of the FDA and other regulatory authorities despite having progressed through initial clinical trials.
Our devices and products may not be approved or cleared even though clinical or other data, in our view, are adequate to support an approval or clearance. The FDA or other regulatory authorities may:
disagree with our trial design and our interpretation of data from pre-clinical studies and clinical trials;
change requirements for the approval or clearance of a product candidate even after reviewing and providing comment on a protocol for a pivotal clinical trial;
approve or clear a product candidate for fewer or more limited indications or uses than we request;
grant approval or clearance contingent on the performance of costly post-marketing clinical trials; or
not approve the labeling claims necessary or desirable for the successful commercialization of our product candidates.
17
Table of Contents
These factors would affect the rate at which our products are adopted in the medical community.
Our success depends, in part, on our ability to achieve FDA pre-market approval of the EPi-Sense device for the treatment of Afib and the commercial success of this product.
On May 8, 2020, we announced the results from the CONVERGE IDE clinical trial. The CONVERGE trial achieved its primary efficacy endpoint with an approximately 18% difference in favor of the hybrid Convergent procedure as compared to standalone endocardial catheter ablation.
The CONVERGE trial primary efficacy endpoint is freedom from Afib, atrial tachycardia (AT), and atrial flutter (AFL), absent class I and III anti-arrhythmic drugs (AADs) except for a previously failed or demonstrated intolerance to class I or III AADs, with no increase in dosage following the 3-month blanking period through the 12 months post procedure follow-up visit. The primary safety endpoint is the incidence of major adverse events (MAEs) specified in the protocol for subjects undergoing the Convergent procedure from the time of the intervention through 30-days post intervention. There were no deaths, cardiac perforations, or atrio-esophageal fistulas reported in the CONVERGE trial, and the MAE rate of 7.8% in the treatment arm is lower than the protocol pre-specified performance goal of 12%. However, there can be no assurance that the FDA will grant pre-market approval of the EPi-Sense device based on this data.
Although our CONVERGE IDE device is currently cleared under section 510(k), we are also pursuing a PMA from the FDA. The process for obtaining marketing approval from the FDA or similar foreign governmental agencies is both time-consuming and costly, with no certainty of a successful outcome. The last module of the PMA application was submitted to FDA in December 2019. Throughout 2020, we have conducted several meetings with FDA as they review our PMA submission to complete the regulatory process. In November 2020, we submitted our responses to questions posed by FDA, seeking PMA approval of the EPi-Sense system for an indication for treatment of symptomatic, drug-refractory, long-standing persistent atrial fibrillation, when augmented with an endocardial ablation catheter. There can be no assurance that we will obtain a pre-market approval for the EPi-Sense device on a timely basis, or at all. If we are unable to achieve pre-market approval for the EPi-Sense device, our business will be significantly adversely impacted, which could have a materially adverse effect on our business, financial condition and results of operations.
Our success is dependent on our ability to train surgeons in the safe and effective use of our products. Restrictions on our ability to train surgeons, or unwillingness of surgeons to participate in such training, could reduce the market acceptance of our products.
Our research and development efforts and our marketing strategy depend heavily on obtaining support, physician training assistance and collaboration from experienced physicians at leading commercial and research hospitals, particularly in the U.S. and Europe. We deliver training on the safe and effective use of our products consistent with their FDA (or equivalent regulatory body) approved or cleared indications. While we train providers in the safe and effective use of our products, we do not train them to use any of our products specifically to treat Afib unless the product is FDA-approved specifically for the treatment of Afib. In order for surgeons to learn to use our products, they must attend training sessions to familiarize themselves with the products, and they must be committed to learning the technology. Further, surgeons must utilize the technology on a regular basis to ensure they maintain the skill set necessary to use the products. Continued market acceptance could be delayed by lack of surgeon willingness to attend training sessions, by the time required to complete this training or by state or institutional restrictions on our ability to provide training. If we are unable to gain and/or maintain such support, training services and collaboration, our ability to market our products and, as a result, our financial condition, results of operations and cash flow, could be materially and adversely affected.
We rely on independent distributors to market and sell our products in certain markets outside of the United States, and a failure of our independent distributors to successfully market our products or any disruption in their ability to do so may adversely impact our sales.
We depend on independent third-party distributors to sell our products in certain markets outside of the United States, and if these distributors do not perform, we may be unable to maintain or increase international revenue. We intend to grow our business outside of the United States, and to do so, we will need to attract additional distributors or hire direct sales personnel to expand the territories in which we sell our products. Independent distributors may terminate their relationship with us or devote insufficient sales efforts to our products. We are not able to control our independent distributors, and they may not be successful in marketing our products. In addition, many of our independent distributors outside of the United States initially obtain and maintain foreign regulatory approval for sale of our products in their respective countries. Our failure to maintain our relationships with our independent distributors outside of the United States, or our failure to recruit and retain additional skilled independent distributors in these locations, could have an adverse effect on our operations. Turnover among our independent distributors, even if replaced, may adversely affect our short-term financial results while we transition to new independent distributors or direct sales personnel. The ability of these independent distributors to market and sell our products could also be adversely affected by unexpected events, including, but not limited to, power failures, nuclear events, natural or other disasters and war or terrorist activities. In addition, the ability of our independent distributors to borrow money from their existing lenders or to obtain credit from other sources to purchase our products may be impaired or our independent distributors could experience a significant change in their liquidity or financial condition, all of which could impair their ability to distribute our products and eventually lead to distributor turnover, and may adversely impact our sales.
18
Table of Contents
Industry Conditions Risks
Healthcare costs have risen significantly over the past decade. There have been and may continue to be proposals by legislators, regulators and third-party payors to keep, contain or reduce healthcare costs.
The continuing efforts of governments, insurance companies and other payors of healthcare costs to contain or reduce these costs, combined with closer scrutiny of such costs, could lead to patients being unable to obtain approval for payment from these third-party payors. The cost containment measures that healthcare providers are instituting both in the U.S. and internationally could harm our business. Some healthcare providers in the U.S. have adopted or are considering a managed care system in which the providers contract to provide comprehensive healthcare for a fixed cost per person. Healthcare providers may attempt to control costs by authorizing fewer elective surgical procedures or by requiring the use of the least expensive devices possible, which could adversely affect the demand for our products or the price at which we can sell our products. Some healthcare providers have sought to consolidate and create new companies with greater market power, including hospitals. As the healthcare industry consolidates, competition to provide products and services has become and will continue to become more intense. This has resulted and likely will continue to result in greater pricing pressures and the exclusion of certain suppliers from important marketing segments.
Adverse changes in payors’ policies toward coverage and reimbursement for surgical procedures would harm our ability to promote and sell our products.
Third-party payors are increasingly exerting pressure on medical device companies to reduce their prices. Even to the extent that the use of our products is reimbursed by private payors and governmental payors, adverse changes in payors’ policies toward coverage and reimbursement for surgical procedures would also harm our ability to promote and sell our products. Payors continue to review their policies and can, without notice, deny coverage for treatments that include the use of our products. Because each third-party payor individually approves coverage and reimbursement, obtaining these approvals may be time-consuming and costly. In addition, third-party payors may require us to provide scientific and clinical support for the use of our products. Adverse changes in coverage and reimbursement for surgical procedures could harm our business and reduce our revenue.
FDA does not regulate the practice of medicine. Physicians may use our products in circumstances where they deem it medically appropriate, such as for the treatment of Afib or the reduction in stroke risk, even though FDA may not have approved or cleared our products to be marketed specifically for those indications. Some payors may deny coverage or payment for the use of our products for indications not specifically approved or cleared by FDA. Often, these denials can be overcome through an appeals process, but there is no guarantee of success in these cases.
If coverage and adequate levels of reimbursement from governmental and third-party payors outside of the United States are not obtained and maintained, sales of our products outside of the United States may decrease, and we may fail to achieve or maintain significant sales outside of the United States.
Our revenue generated from sales outside of the United States is also dependent upon coverage and reimbursement within prevailing foreign healthcare payment systems. Foreign healthcare payors generally do not provide the same level of reimbursement for sole-therapy minimally invasive procedures utilizing ablation devices and related products as payors in the United States. In addition, healthcare cost containment efforts similar to those we face in the United States are prevalent in many of the other countries in which we sell our products, and these efforts are expected to continue. To the extent that the use of our devices has historically received reimbursement under a foreign healthcare payment system, such reimbursement, if any, has typically been significantly less than the reimbursement provided in the United States. If coverage and adequate levels of reimbursement from governmental and third-party payors outside of the United States are not obtained and maintained, sales of our products outside of the United States may decrease, and we may fail to achieve or maintain significant sales outside of the United States.
Operational Risks
We may experience unfavorable publicity relating to our business and our industry. This publicity could have a negative impact on our ability to attract and retain customers, our sales, clinical studies involving our products, our reputation and our stock price.
We may experience a negative impact on our business from newspaper articles or other media reports relating to, among other things, our compliance with FDA regulations for medical device reporting, adverse patient and clinical outcomes and concerns over disclosure of financial relationships between us and our consultants. We believe that such publicity would potentially have a negative impact on our clinical studies, business, results of operations and financial condition or cause other adverse effects, including a decline in the price of our stock.
19
Table of Contents
We rely upon single and limited source third-party suppliers and third-party logistics providers, making us vulnerable to supply problems and price fluctuations which could harm our business.
We rely on single and limited source third-party vendors for the manufacture and sterilization of components used in our products. For example, we rely on one vendor to manufacture several of our RF generators, as well as separate vendors to manufacture our EPi-Sense Guided Coagulation System with VisiTrax technology and related RF generator. It would be a time consuming and lengthy process to secure these products from an alternative supplier. We have significant concentrations with a limited number of vendors. We also rely on a third party to handle our warehousing and logistics functions for European and Middle Eastern markets on our behalf.
Our reliance on outside manufacturers, sterilizers and suppliers also subjects us to risks that could harm our business, including:
we may not be able to obtain adequate supply in a timely manner or on commercially reasonable terms;
we may have difficulty timely locating and qualifying alternative suppliers;
switching components may require product redesign and new submissions to FDA which could significantly delay production or, if FDA refuses to approve the changes, completely eliminate our ability to sell our products;
our suppliers manufacture products for a range of customers, and fluctuations in demand for the products those suppliers manufacture for others may affect their ability to deliver components to us in a timely manner; and
our suppliers may encounter financial hardships unrelated to our demand for components, which could inhibit their ability to fulfill our orders and meet our requirements.
Identifying and qualifying additional or replacement suppliers for any of the components used in our products or a replacement warehousing and logistics provider, if required, may not be accomplished quickly and could involve significant additional costs. Any interruption or delay in the supply of components, materials or warehousing and logistics, or our inability to obtain components or materials from alternate sources at acceptable prices in a timely manner, could impair our ability to meet the demand of our customers and cause them to cancel orders or switch to competitive products and could therefore have a material adverse effect on our business, financial condition and results of operations.
Our manufacturing operations are primarily conducted at a single location, and any disruption at our manufacturing facility could increase our expenses and decrease our revenue.
Our manufacturing operations are primarily conducted at a single location in Ohio, with select products manufactured in California. While we take precautions at the Ohio location, we do not maintain a backup manufacturing facility, making us dependent on the current facility and production workers for the continued operation of our business. A natural or other disaster could damage or destroy our manufacturing equipment and cause substantial delays in our manufacturing operations, which could lead to additional expense and decreased revenue due to lack of supply. The insurance we maintain may not be adequate to cover our losses. With or without insurance, damage to our facility or our other property due to a natural disaster or casualty event could have a material adverse effect on our business, financial condition and results of operations.
Our business growth strategy involves the potential for significant acquisitions. Acquisitions have inherent uncertainties and involve risks and difficulties in integrating that may adversely affect our business, results of operations and financial condition.
All acquisitions involve inherent uncertainties, which may include, among other things, our ability to:
successfully identify targets for acquisition;
negotiate reasonable terms;
properly perform due diligence and determine significant risks associated with a particular acquisition;
properly evaluate target company management capabilities; and
successfully transition and integrate the acquired company into our business and achieve the desired performance.
We may acquire businesses with unknown liabilities, contingent liabilities or internal control deficiencies. We have plans and procedures in place to conduct reviews of potential acquisition candidates for compliance with applicable regulations and laws prior to acquisition. Despite these efforts, realization of any of these liabilities or deficiencies may increase our expenses, adversely affect our financial position through the initiation, pendency or outcome of litigation or otherwise, or cause us to fail to meet our public financial reporting obligations.
We have consummated three significant acquisitions since 2013 and in the future may continue to invest a substantial amount of capital in acquisitions. We continue to evaluate potential acquisition opportunities to support, strengthen and grow our business. There can be no assurance that we will be able to locate suitable acquisition candidates, acquire possible acquisition candidates, acquire such candidates on commercially reasonable terms, or integrate acquired businesses successfully in the future. In addition, any
20
Table of Contents
governmental review or investigation of our proposed acquisitions, such as by the Federal Trade Commission, may impede, limit or prevent us from proceeding with an acquisition. Future acquisitions may require us to incur additional debt and contingent liabilities, which may adversely affect our business, results of operations and financial condition. The process of integrating acquired businesses into our existing operations may result in operating, contract and supply chain difficulties, such as the failure to retain customers or management personnel. Such difficulties may divert significant financial, operational and managerial resources from our existing operations and make it more difficult to achieve our operating and strategic objectives.
If we fail to properly manage our anticipated growth, our business could suffer.
We may experience periods of rapid growth and expansion, which could place a significant strain on our personnel, information technology systems and other resources. In particular, the increase in our direct sales force requires significant management and other supporting resources. Any failure by us to manage our growth effectively could have an adverse effect on our ability to achieve our development and commercialization goals.
To achieve our revenue goals, we must successfully increase production output as required by customer demand. In the future, we may experience difficulties in increasing production, including problems with production yields and quality control, component supply and shortages of qualified personnel. These problems could result in delays in product availability and increases in expenses. Any such delay or increased expense could adversely affect our ability to generate revenues.
Future growth will also impose significant added responsibilities on management, including the need to identify, recruit, train and integrate additional employees. In addition, rapid and significant growth will place a strain on our administrative and operational infrastructure. In order to manage our operations and growth, we will need to continue to improve our operational and management controls, reporting and information technology systems and financial internal control procedures. If we are unable to manage our growth effectively, it may be difficult for us to execute our business strategy and our operating results and business could suffer.
We depend on our officers and other skilled and experienced personnel to operate our business effectively. If we are not able to retain our current employees or recruit additional qualified personnel, our business will suffer and our future revenue and profitability will be impaired.
We are highly dependent on the skills and experience of our President and Chief Executive Officer, Michael H. Carrel, and certain other officers and key employees. We do not have any insurance in the event of the death or disability of key personnel. Our officers and key employees, with the exception of our President and Chief Executive Officer, do not have employment agreements, and they may terminate their employment and work elsewhere without notice and without cause or good reason. Currently we have non-compete agreements with our officers and other employees. Due to the specialized knowledge of each of our officers with respect to our products and our operations and the limited pool of people with relevant experience in the medical device field, the loss of service of one or more of these individuals could significantly affect our ability to operate and manage our business. The announcement of the loss of one or more of our key personnel could negatively affect our stock price.
We depend on our scientific and technical personnel for successful product development and innovation, which are critical to the success of our business. In addition, to succeed in the implementation of our business strategy, our management team must rapidly execute our sales strategy, obtain expanded FDA clearances and approvals, achieve market acceptance for our products and further develop products, while managing anticipated growth by implementing effective planning, manufacturing and operating processes. Managing this growth will require us to attract and retain additional management and technical personnel. We rely primarily on direct sales employees to sell our products in the United States and failure to adequately train them in the use and benefits of our products will prevent us from achieving our market share and revenue growth goals. We have key relationships with physicians that involve procedure, product, market and clinical development. If any of these physicians end their relationship with us, our business could be negatively impacted. We cannot assure you that we will be able to attract and retain the personnel and physician relationships necessary to grow and expand our business and operations. If we fail to identify, attract, retain and motivate these highly skilled personnel and physicians, we may be unable to continue our development and sales activities.
Disruptions of critical information systems or material breaches in the security of our systems could harm our business, customer relations and financial condition.
In the ordinary course of our business, we collect and store sensitive data, including intellectual property, our proprietary business information and that of our customers, suppliers and business partners, and personally identifiable information of our customers and employees in our data centers and on our networks. The secure processing, maintenance and transmission of this information is critical to our operations and business strategy. Despite our security measures, our information technology and infrastructure may be vulnerable to attacks by hackers or breached due to employee error, malfeasance or other disruptions. Any such breach could compromise our networks and the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings, liability under laws that protect the privacy of personal information, regulatory penalties, disrupt our operations and the services we provide to customers, and damage our reputation and cause a loss of confidence in our products and services, which could adversely affect our business, operating margins, revenues and competitive position.
21
Table of Contents
We also rely in part on information technology to store information, interface with customers, maintain financial accuracy, secure our data and accurately produce our financial statements. If our information technology systems do not effectively and securely collect, store, process and report relevant data for the operation of our business, whether due to equipment malfunction or constraints, software deficiencies, human error or cyber incident, our ability to effectively plan, forecast and execute our business plan and comply with applicable laws and regulations would be materially impaired. Any such impairment could have a material adverse effect on our results of operations, financial condition and the timeliness with which we report our operating results.
Our insurance may not cover our indemnification obligations and other liabilities associated with our operations.
We maintain insurance designed to provide coverage for ordinary risks associated with our operations and our ordinary indemnification obligations, which we believe to be customary for our industry. The coverage provided by such insurance may not be adequate for claims we may make or may be contested by our insurance carriers. If our insurance is not adequate or available to pay liabilities associated with our operations, or if we are unable to purchase adequate insurance at reasonable rates in the future, our business, financial condition, results of operations or cash flows may be materially adversely impacted.
Legal & Compliance Risks
We spend considerable time and money complying with federal, state and foreign regulations in addition to FDA regulations, and, if we are unable to fully comply with such regulations, we could face substantial penalties.
We are subject to extensive regulation by the federal government and foreign countries in which we conduct business. The laws that affect our ability to operate our business in addition to the FDCA and FDA regulations include, but are not limited to, the following:
the Federal Anti-Kickback Statute, which prohibits persons from knowingly and willfully soliciting, offering, receiving or providing remuneration, directly or indirectly, in cash or in kind, to induce either the referral of an individual, or furnishing or arranging for a good or service, for which payment may be made under federal healthcare programs such as the Medicare and Medicaid Programs;
the Federal False Claims Act, which prohibits submitting a false claim or causing the submission of a false claim to the government;
Medicare laws and regulations that prescribe the requirements for coverage and payment, including the amount of such payment, and laws prohibiting false claims for reimbursement under Medicare and Medicaid;
state consumer protection, fraud and business practice laws, including the California Consumer Privacy Act (“CCPA”), which became effective on January 1, 2020, which among other things, requires new disclosures to California consumers and provides consumers new abilities to opt out of certain sales of personal information;
state laws that prohibit the practice of medicine by non-doctors and by doctors not licensed in a particular state, and fee-splitting arrangements between doctors and non-doctors, as well as state law equivalents to the Anti-Kickback Statute and the Stark Law, which may not be limited to government-reimbursed items;
federal and state healthcare fraud and abuse laws or laws protecting the privacy of patient medical information, including the Health Insurance Portability and Accountability Act (HIPAA) which protects medical records and other personal health information by limiting their use and disclosure, giving individuals the right to access, amend and seek accounting reasonably necessary to accomplish the intended purpose;
laws and regulations with respect to the collection, use, disclosure, transfer, and storage of personal data that we may collect from our employees, consultants or in conjunction with clinical trials such as the General Data Protection Regulation in the European Union;
the Federal Trade Commission Act and similar laws regulating advertising and consumer protection; and
similar and other regulations outside the United States.
Healthcare fraud and abuse regulations are complex, and even minor, inadvertent irregularities can potentially give rise to claims that a law has been violated. Any violations of these laws could result in a material adverse effect on our business, financial condition and results of operations. If there is a change in law, regulation or administrative or judicial interpretations, we may have to change our business practices or our existing business practices could be challenged as unlawful, which could have a material adverse effect on our business, financial condition and results of operations.
Our manufacturing operations and research and development activities involve the use of biological materials and hazardous substances and are subject to a variety of federal, state and local environmental laws and regulations relating to the storage, use, discharge, disposal, remediation of and human exposure to hazardous substances. Our research and development and manufacturing operations may produce biological waste materials, such as animal tissues and certain chemical waste. These operations are permitted by regulatory authorities, and the resultant waste materials are disposed of in compliance with environmental laws and regulations. Compliance with these laws and regulations may be expensive, and non-compliance could result in substantial liabilities. In addition,
22
Table of Contents
we cannot eliminate the risk of accidental contamination or injury to third parties from the use, storage, handling or disposal of these materials. In the event of contamination or injury, we could be held liable for any resulting damages, and any liability could exceed any applicable insurance coverage we may have. Our manufacturing operations may result in the release, discharge, emission or disposal of hazardous substances that could cause us to incur substantial liabilities, including costs for investigation and remediation.
If our past or present operations are found to be in violation of any of the laws described above or the other governmental regulations to which we, our distributors or our customers are subject, we may be subject to the applicable penalty associated with the violation, including civil and criminal penalties, damages, fines, exclusion from Medicare, Medicaid and other government programs and the curtailment or restructuring of our operations. If we are required to obtain permits or licensure under these laws that we do not already possess, we may become subject to substantial additional regulation or incur significant expense. Any penalties, damages, fines, curtailment or restructuring of our operations would adversely affect our ability to operate our business and our financial results. The risk of our being found in violation of these laws is increased by the fact that many of them have not been fully or clearly interpreted by the regulatory authorities or the courts, and their provisions are subject to a variety of interpretations and additional legal or regulatory change. Any action against us for violation of these laws, even if we successfully defend against it, could cause us to incur significant legal expenses, divert our management’s attention from the operation of our business and damage our reputation.
If we fail to comply with the extensive FDA regulations relating to our business, we may be subject to fines, injunctions and penalties, and our ability to commercially distribute and promote our products may be hurt.
Our products are classified by FDA as medical devices and, as such, are subject to extensive regulation by FDA and numerous other federal, state and foreign governmental authorities. FDA regulations, guidance, notices and other issuances specific to medical devices are broad and regulate numerous aspects of our business. Compliance with FDA, state and other regulations can be complex, expensive and time-consuming. FDA and other authorities have broad enforcement powers. Furthermore, changes in the applicable governmental regulations could prevent further commercialization of our products and technologies and could materially harm our business.
If a serious failure to comply with applicable regulatory requirements was determined, it could result in enforcement action by FDA or other state or federal agencies, including the DOJ, which may include any of the following sanctions, among others:
warning letters, fines, injunctions, consent decrees and civil penalties;
repair, replacement, refunds, recall or seizure of our products;
operating restrictions, partial suspension or total shutdown of production;
suspension or termination of our clinical trials;
refusing or delaying our pending requests for 510(k) clearance or PMAs, new intended uses or modifications to existing products;
withdrawing 510(k) clearance or PMAs that have already been granted; and
criminal prosecution.
If any of these events were to occur, we could lose customers and our production, product sales, business, results of operations and financial condition would be harmed.
We are also subject to medical device reporting regulations that require us to file reports with FDA if our products may have caused or contributed to a death or serious injury or, in the event of product malfunction, that if such malfunction were to recur, would likely cause or contribute to a death or serious injury. There have been incidents, including patient deaths, which have occurred during or following procedures using our products that we have not reported to FDA because we determined that our products did not malfunction and did not cause or contribute to the outcomes in these incidents. If FDA disagrees with us, however, and determines that we should have submitted reports for these adverse events, we could be subject to significant regulatory fines or other penalties. In addition, the number of medical device reports we make, or the magnitude of the problems reported, could cause us or FDA to terminate or modify our clinical trials or recall or cease the sale of our products, and could hurt commercial acceptance of our products and harm our reputation with customers.
Unless and until we obtain additional FDA approval for our products, we will not be able to promote most of them to treat Afib or to prevent stroke, and our ability to maintain and grow our business could be harmed. We may be subject to fines, penalties, injunctions and other sanctions if we are deemed to be promoting the use of our products for unapproved, or off-label, uses.
Our business and future growth depend on the continued use of our products for the treatment of Afib or prevention of stroke. Unless the products are approved or cleared by FDA specifically for the treatment of Afib or prevention of stroke, we may not make claims about the safety or effectiveness of our products for such uses. In order to obtain additional FDA approvals to promote our products for the treatment of Afib or reduction in stroke risk, we will need to demonstrate in clinical trials that our products are safe and effective for such use. Development of sufficient and appropriate clinical protocols to demonstrate quality, safety and efficacy may be required and we may not adequately develop such protocols to support approval. We cannot assure you that any of our clinical
23
Table of Contents
trials will be completed in a timely manner or successfully or that the results obtained will be acceptable to FDA. We, FDA or the IRB may suspend a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits.
These limitations present a material risk that FDA or other federal or state law enforcement authorities could determine that the nature and scope of our sales, marketing and/or support activities, though designed to comply with all FDA requirements, constitute the promotion of our products for an unapproved use in violation of the FDCA. We also face the risk that FDA or other governmental authorities might pursue enforcement based on past activities that we have discontinued or changed, including sales activities, arrangements with institutions and doctors, educational and training programs and other activities. Investigations concerning the promotion of unapproved uses and related issues, are typically expensive, disruptive and burdensome and generate negative publicity. If our promotional activities are found to be in violation of the law, we may face significant fines and penalties and may be required to substantially change our sales, promotion, grant and educational activities. There is also a possibility that we could be enjoined from selling some or all of our products for any unapproved use.
Although our Isolator Synergy System received FDA approval for the treatment of some forms of Afib in certain procedures, we have not received FDA clearance or approval to promote our other products for the treatment of Afib or the prevention of stroke. Unless and until we obtain FDA clearance or approval for the use of our other products to treat Afib or prevent stroke, we, and others acting on our behalf, may not claim in the U.S. that such products are safe and effective for such uses or otherwise promote them for such uses. Similar restrictions exist outside of the U.S. There is no assurance that future clearances or approvals of our products will be granted or that current or future clearances or approvals will not be withdrawn. Failure to obtain a clearance or approval or loss of an existing clearance or approval, could hurt our ability to maintain and grow our business.
Modifications to our products may require new clearances or approvals or may require us to cease promoting or to recall the modified products until such clearances or approvals are obtained and FDA may not agree with our conclusions regarding whether new clearances or approvals were required.
Any modification to a 510(k)-cleared device that would constitute a change in its intended use, design or manufacture could require a new or supplemental 510(k) clearance or, possibly, submission and FDA approval of a PMA application. FDA requires every medical device company to make the determination as to whether a 510(k) must be filed, but FDA may review any medical device company’s decision. We have made modifications to our products and concluded that such modifications did not require us to submit a new or supplemental 510(k). FDA may not agree with our decisions regarding whether submissions were required.
If FDA were to disagree with us and require us to submit a 510(k), PMA or a PMA supplement for then-existing modifications, we could be required to cease promoting or to recall the modified product until we obtain clearance or approval. In addition, we could be subject to significant regulatory fines or other penalties. Furthermore, our products could be subject to recall if FDA determines, for any reason, that our products are not safe or effective or that appropriate regulatory submissions were not made. Delays in receipt or failure to receive clearances or approvals, the loss of previously received clearances or approvals or the failure to comply with existing or future regulatory requirements could reduce our sales, profitability and future growth prospects.
If we or our third-party vendors fail to comply with extensive FDA regulations relating to the manufacturing of our products or any component part, we may be subject to fines, injunctions and penalties, and our ability to commercially distribute and sell our products may be hurt.
Our manufacturing facilities and the manufacturing facilities of any of our third-party component manufacturers, critical suppliers or third-party sterilization facility are required to comply with FDA’s QSR, which sets forth minimum standards for the procedures, execution and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of the products we sell. FDA may evaluate our compliance with the QSR, among other ways, through periodic announced or unannounced inspections which could disrupt our operations and interrupt our manufacturing. If in conducting an inspection of our manufacturing facilities or the manufacturing facilities of any of our third-party component manufacturers, critical suppliers or third-party sterilization facilities, an FDA investigator observes conditions or practices believed to violate the QSR, the investigator may document their observations on a Form FDA-483 that is issued at the conclusion of the inspection. A manufacturer that receives an FDA-483 may respond in writing and explain any corrective actions taken in response to the inspectional observations. FDA will typically review the facility’s written response and may re-inspect to determine the facility’s compliance with the QSR and other applicable regulatory requirements. Failure to take adequate and timely corrective actions to remedy objectionable conditions listed on an FDA-483 could result in FDA taking administrative or enforcement actions. Among these may be FDA’s issuance of a Warning Letter to a manufacturer, which informs the manufacturer that FDA considers the observed violations to be of “regulatory significance” that, if not corrected, could result in further enforcement action. FDA enforcement actions, which include seizure, injunction and criminal prosecution, could result in total or partial suspension of a facility’s production and/or distribution, product recalls, fines, suspension of FDA’s review of product applications and FDA’s issuance of adverse publicity. Thus, an adverse inspection could force a shutdown of our manufacturing operations or a recall of our products. Adverse inspections could also delay FDA approval of our products and could have an adverse effect on our production, sales and financial condition.
24
Table of Contents
We and any of our third-party vendors may also encounter other problems during manufacturing including failure to follow specific protocols and procedures, equipment malfunction and environmental factors, any of which could delay or impede our ability to meet demand. The manufacture of our product also subjects us to risks that could harm our business, including problems relating to the sterilization of our products or facilities and errors in manufacturing components that could negatively affect the efficacy or safety of our products or cause delays in shipment of our products. Any interruption or delay in the manufacture of the product or any of its components could impair our ability to meet the demand of our customers and cause them to cancel orders or switch to competitive products and could, therefore, have a material adverse effect on our business, financial condition and results of operations.
We are currently under investigation by the United States Department of Justice, and any adverse finding, allegation, or exercise of enforcement or regulatory discretion by the DOJ could materially and adversely affect our business, financial condition or results of operations.
As previously disclosed, on December 11, 2017, the Company received a Civil Investigative Demand (CID) from the U.S. Department of Justice (DOJ) stating that it is investigating the Company to determine whether the Company has violated the False Claims Act, relating to the promotion of certain medical devices related to the treatment of atrial fibrillation for off-label use and submitted or caused to be submitted false claims to certain federal and state health care programs for medically unnecessary healthcare services related to the treatment of Afib. The CID covers the period from January 2010 to December 2017 and requires the production of documents and answers to written interrogatories. The Company had no knowledge of the investigation prior to receipt of the CID. The Company maintains rigorous policies and procedures to promote compliance with the False Claims Act and other applicable regulatory requirements. The Company provided the DOJ with documents and answers to the written interrogatories and is cooperating with the investigation. However, the Company cannot predict when the investigation will be resolved, the outcome of the investigation or its potential impact on the Company. While the Company believes its practices are lawful, there can be no assurance that the DOJ’s ongoing investigation or future exercise of its enforcement, regulatory, discretionary or other powers will not result in findings or alleged violations of federal laws that could lead to enforcement actions, proceedings or litigation and the imposition of damages, fines, penalties, restitution, other monetary liabilities, sanctions, settlements or changes to the Company’s business practices or operations that could have a material adverse effect on the Company’s business, financial condition or results of operations or eliminate altogether the Company’s ability to operate its business or on terms substantially similar to those on which it currently operates.
The use of products we sell may result in injuries or other adverse events that lead to product liability suits, which could be costly to our business or our customers’ businesses.
The use of our products may result in a variety of serious complications, including damage to the heart, internal bleeding, death or other adverse events. Serious complications are commonly encountered in connection with surgical procedures. If products we sell are defectively designed, manufactured or labeled, contain inadequate warnings, contain defective components, are misused or are associated with serious injuries or deaths, we may become subject to costly litigation by our customers or their patients. We carry product liability insurance that is limited in scope and amount and may not be adequate to fully protect us against product liability claims. We could be required to pay damages that exceed our insurance coverage, and such amounts could be significant. Any product liability claim, with or without merit, could also result in an increase in our insurance rates or our inability to secure coverage on reasonable terms, if at all. Even in the absence of a claim, our insurance rates may rise in the future. Any product liability claim, even a meritless or unsuccessful one, would be time-consuming and expensive to defend and could result in the diversion of our management’s attention from our business and result in adverse publicity, withdrawal of clinical trial participants, injury to our reputation and loss of revenue. Any of these events could negatively affect our financial condition.
Our intellectual property rights may not provide meaningful commercial protection for our products, which could enable third parties to use our technology or methods, or very similar technology or methods, and could reduce our ability to compete.
Our success depends significantly on our ability to protect our proprietary rights to the technologies used in our products. We rely on patent protection, as well as a combination of copyright, trade secret and trademark laws and nondisclosure, confidentiality and other contractual restrictions to protect our proprietary technology. However, these legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage. Our patent applications may not issue as patents at all or in a form that will be advantageous to us. Our issued patents and those that may be issued in the future may be challenged, invalidated or circumvented, which could limit our ability to stop competitors from marketing related products.
Although we have taken steps to protect our intellectual property and proprietary technology, we cannot assure you that third parties will not be able to design around our patents or, if they do infringe upon our technology, that we will be successful in or will have sufficient resources to pursue a claim of infringement against those third parties. We believe that third parties may have developed or are developing products that could infringe upon our patent rights. Any pursuit of an infringement claim by us may involve substantial expense or diversion of management attention. In addition, although we have generally entered into confidentiality agreements and intellectual property assignment agreements with our employees, consultants, investigators and advisors, such agreements may be breached, may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements. Additionally, as is common
25
Table of Contents
in the medical device industry, some of these individuals were previously employed at other medical equipment or biotechnology companies, including our competitors. Although no claims are currently pending against us, we may be subject to claims that these individuals have used or disclosed trade secrets or other proprietary information of their former employers.
The laws of foreign countries may not protect our intellectual property rights to the same extent as the laws of the United States. Foreign countries generally do not allow patents to cover methods for performing surgical procedures. If our intellectual property does not provide significant protection against foreign or domestic competition, our competitors could compete more directly with us, which could result in a decrease in our revenue and market share. All of these factors may harm our competitive position.
The medical device industry is characterized by extensive litigation and administrative proceedings over patent and other intellectual property rights and any litigation or claim against us may cause us to incur substantial costs, could place a significant strain on our financial resources, divert the attention of management from our business and harm our reputation.
Despite measures taken to protect our intellectual property, unauthorized parties might copy aspects of our products or obtain and use information that we regard as proprietary. Whether a product infringes a patent involves complex legal and factual issues, the determination of which is often uncertain. Any patent dispute, even one without merit or an unsuccessful one, would be time-consuming and expensive to defend and could result in the diversion of our management’s attention from our business and result in adverse publicity, the disruption of development and marketing efforts, injury to our reputation and loss of revenue. Litigation also puts our patent applications at risk of being rejected and our patents at risk of being invalidated or interpreted narrowly and may provoke third parties to assert claims against us. Any of these events could negatively affect our financial condition.
In the event of a patent dispute, if a third party’s patents were upheld as valid and enforceable and we were found to be infringing, or found to be inducing infringement by others, we could be prevented from selling our products unless we were able to obtain a license to use technology or ideas covered by such patent or are able to redesign our system to avoid infringement, or we may be ordered to pay substantial damages to the patent holders. A license may not be available at all or on terms acceptable to us, and we may not be able to redesign our products to avoid any infringement. Modification of our products or development of new products could require us to conduct additional clinical trials and to revise our filings with FDA and other regulatory bodies, which would be time-consuming and expensive. If we are not successful in obtaining a license or redesigning our products, we may be unable to sell our products and our business could suffer.
We sell our products outside of the United States, and we are subject to various regulatory and other risks relating to international operations, which could harm our revenue and profitability.
Doing business outside of the United States exposes us to risks distinct from those we face in our domestic operations. For example, our operations outside of the United States are subject to different regulatory requirements in each jurisdiction where we operate or have sales. Our failure, or the failure of our distributors, to comply with current or future foreign regulatory requirements, or the assertion by foreign authorities that we or our distributors have failed to comply, could result in adverse consequences, including enforcement actions, fines and penalties, recalls, cessation of sales, civil and criminal prosecution, and the consequences could be disproportionate to the relative contribution of our international operations to our results of operations. Moreover, if political or economic conditions deteriorate in these countries, or if any of these countries are affected by a natural disaster or other catastrophe, our ability to conduct our international operations or collect on international accounts receivable could be limited and our costs could be increased, which could negatively affect our operating results. Engaging in business outside of the United States inherently involves a number of other difficulties and risks, including, but not limited to:
export restrictions and controls relating to technology;
pricing pressure that we may experience internationally;
difficulties in enforcing agreements and collecting receivables through certain foreign legal systems;
political and economic instability;